NUUO_DevicePack_v3.2.1_release note_20140425

NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v3.2.1 (2014/4/25)
Modules:
Device Pack
v 3.2.1
Supported Systems:
Mainconsole
v 4.1.12 and above*
*For Mainconsole multi stream and setting function, please upgrade to Mainconsole v5.0.0 and
above first.
Bug fixed:
Mainconsole:
1. [ATV] Fixed compatibility issues with adding camera.
2. [Axis] Fixed compatibility issues with adding camera.
3. [CNB] Fixed compatibility issues with adding camera.
4. [GE] Fixed compatibility issues with adding camera.
5. [Hikvision] Fixed compatibility issues with adding camera.
6. [VisionHitech] Fixed compatibility issues with adding camera.
7. [Vista] Fixed compatibility issues with adding camera.
8. [Vivotek] Fixed compatibility issues with adding camera.
1 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 1
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v3.2.0 (2014/4/7)
Modules:
Device Pack
v 3.2.0
Supported Systems:
Mainconsole
v 4.1.12 and above*
NVRmini 2
v 1.7.1 and above**
NVRsolo
v 1.1.1 and above**
Titan NVR
v 1.6.2 and above
Crystal Titan
v 2.0.3 and above
*For Mainconsole multi stream and setting function, please upgrade to Mainconsole v5.0.0 and
above first.
**For NVRmini 2 and NVRsolo multi stream setting function, please upgrade to NVRmini 2/NVRsolo
v2.0.0 and above first.
New Camera Supported:
ACTi
I51(fisheye camera) and I71(fisheye camera)
AMTK
AH2816T (Fisheye camera)
Arecont
AV3455 and AV10225
Dlink
DCS-7000L
Fine
TCP-HFB720-H
Guardeon
GND-D2300V, GND-D3200, GND-F2300 and GND-H2300IR
Levelone
FCS-5042
Samsung
SND-6011R and SNV-7080R
Sony
SNC-WR600, SNC-WR602, SNC-XM632, SNC-XM636 and SNC-XM637
Vitek
VTC-IR401/210NP
Vivotek
FD8355EHV and FD8365EHV
Wavekrom
WK-SD6000HD
FW upgrade:
Arecont
AV10115 and AV10255 (65225)
CNB
IDC4050VF (XNET.M1-3.00.13.1125), INS2000
(FW XNET.A1-2.01.13.0902) and
IVC5055VR(XNET.M1-3.00.13.1125)
2 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 2
NVR Device Pack Release Note
NUUO version 3.2.1
Dlink
DCS-3714 (FW: V1.00.00) and DCS-6115 (FW: V0.09.00)
Fine
ACM-V3103 (FW: 2.03.14A) and TCP-HVB3105D (FW: v2.03.14A)
Levelone
FCS-3062 (FW: 1.0.0.6build4), FCS-4041 (FW: Le20140113NSA),
FCS-4042 (FW: Le20140113NSA) and FCS-5052(FW: 1.0.0.6build4)
Samsung
SNO-7080R(FW 2.00_121004)
Sunell
SN-IPR54/31UDN (FW: v1.7.1001.3.0.13)
Vision Hitech
Vision SM3Ti (VISION_M3Ti_2014.02.27_v.1.1.5.13.dat)
Zavio
D7320 (FW: M3.1.5.21)
Multi Stream Setting:
1. Support multi stream setting function on Santec SNC-3302, SNC-3305, SNC-3322, SNC-4302,
SNC-5312IR, SNC-5315IR, SNC-6202, SNC-6212IR, SNC-6302, SNC-6312IRH, SNC-6315IRH,
SNC-8322I/HO, Samsung SND-6011R, SNV-7080R, SNO-7080R and all Sunell models.
New Feature:
1. Support multi stream setting function with NVRmini 2/NVRsolo v2.0.0 and above on Axis PQM
series from DP v3.2.0.
2. Support Snapshot function* with NVRmini 2/NVRsolo v2.0.0 and above on Axis PQM series,
Arecont camera, Sony G6 series, Vivotek 8000 series, Honeywell HDZ20HD HDZ20HDE,
HDZ20HDEX, HDZ20HDX and Hikvision DS-2CD2012-I, DS-2CD2112-I, DS-2CD2212-I3,
DS-2CD2212-I5, DS-2CD2312-I, DS-2CD2612F-I, DS-2CD2612F-IS, DS-2CD2632F-IS,
DS-2CD2712F-I, DS-2CD2712F-IS, DS-2CD2732F-IS, DS-2CD7253F-EIZ, DS-2CD8253F-EI,
DS-2CD8264FWD-EIS, DS-2CD864FWD-E, DS-2DF1-572, DS-6601HFHI, Generic from DP
v3.2.0.
*One of the cameras in the system must support I/O functions in order to enable the snapshot
feature. This is a known issue and we are looking to fix it with the next product version update.
3. Support PTZ function on ACTi Generic.
4. Support Santec four motion areas detection on Santec SNC-3302, SNC-3305, SNC-3322,
SNC-4302, SNC-5312IR, SNC-5315IR, SNC-6202, SNC-6212IR, SNC-6302, SNC-6312IRH,
SNC-6315IRH, SNC-8322I/HO.
5. Support Vivotek smart stream function on Mainconsole.
Notice:
1. Acti:
a.
I71
i.
The camera resolution N640x360 should be N640x480.
2. CNB:
a.
CNB-IDC4050VF
3 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 3
NVR Device Pack Release Note
NUUO version 3.2.1
i.
Cameras with VGA resolution will be unable to change bitrates. (camera firmware
issue)
b.
CNB-INS2000
i.
Camera is unable to achieve maximum FPS. (camera firmware issue)
ii.
Audio stutter with G.711. (camera firmware issue)
ii.
The FPS setting for 2nd stream will get false value (25 or 30) (camera firmware
issue)
iii.
Camera is unable to change bitrate. (camera firmware issue)
3. Dlink:
a.
DCS-3714
i.
The camera with highest quality and resolution is unable to achieve 30 fps.
(camera firmware issue)
b.
DCS-6115
i.
The camera with highest quality and MJPEG format is unable to achieve 30 fps and
audio will stutter. (camera firmware issue)
c.
DCS-7000L
ii.
The camera with highest quality/resolution and MJPEG format is unable to achieve
30 fps. (camera firmware issue)
iii.
The parameters of the camera are not configurable with H.264 format. (camera
firmware issue)
iv.
The format of the camera is not configurable from MJPEG to H.264. (camera
firmware issue)
v.
The list of camera format MPEG4 isn’t synchronized with the one on camera’s web.
If user sets camera format to MPEG4, camera will crash. (camera firmware issue)
vi.
Motion detection may not trigger continuously. (camera firmware issue)
4. Fine:
a.
ACM-V3103, TCP-HVB3105D
i.
Camera will be disconnected when disabling camera MJPEG format on camera’s
web.
ii.
Camera with resolution 1920x1080 is unable to achieve 20 fps. (camera firmware
issue)
iii.
Video and audio stream malfunction within a period of time. (camera firmware
issue).
5. Guardeon:
a.
GDN-H2300IR
i.
Camera will reboot (duration 60 seconds) after parameter configuration. (camera
firmware issue)
4 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 4
NVR Device Pack Release Note
NUUO version 3.2.1
Talk function not supported.
audio in with 16 KHz sampling rate not supported.
vii.
camera UPnP search not supported. (camera firmware issue)
6. LevelOne:
a.
FCS-4042
i.
After quality setting change, the camera is unable to achieve 30 fps.
ii.
The special symbol usage ex:# for camera preset point name will fail.
iii.
It will take 50~60 seconds in MJPEG format and maximum resolution setting
7. Sunell:
a.
All Sunell models has MJPEG codec removed. (Mainconsole)
b.
SN-IPR54/31UDN
i.
Due to Onvif restriction, some frame rate and bit rates cannot be set.
8. VisionHitech:
a.
M3Ti
i.
NUUO use dual mode as default connection mode.
ii.
Camera with format MJPEG and resolution VGA is unable to achieve the camera
setting fps.
9. Vitek:
a.
VTC-IR401
i.
Camera fps is unable to achieve the camera setting fps. (camera performance
issue)
ii.
UPnP search may not work. (camera performance issue)
10. Zavio:
a.
D7320
i.
Camera fps is unable to achieve the desired fps.
Bug fixed:
Mainconsole:
9. [LG] Fixed compatibility issues with adding cameras LG LVS201.
10. [Onvif/Onvif] Fixed the issue that causes Mainconsole to restart when selecting onvif/onvif
settings on a camera
11. [Arecont] Fixed the display mosaic issue on Arecont AV10115 when switching to D/N mode
in live view.
12. [Zavio] Corrected PTZ speed range and auto pan speed setting on Zavio P6210 and 812x
cameras.
13. [Messoa] Messoa PRO series cameras are now correctly labeled as "Messoa Pro" cameras.
14. [Messoa] Messoa NCB858 is now correctly labeled. (previously labeled as NCR858)
5 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 5
NVR Device Pack Release Note
NUUO version 3.2.1
NVRmini 2:
1. [Axis] Dewarp function now supports Axis M3007 camera.
2. [Arecont] Fixed the display mosaic issue on Arecont AV10115 when switching to D/N mode
in live view.
3. [D-Link] Corrected possible issues caused by dual stream connection with D-link DCS-2210
camera.
4. [Messoa] Messoa PRO series cameras are now correctly labeled as "Messoa Pro" cameras.
5. [Messoa] Messoa NCB858 is now correctly labeled. (previously labeled as NCR858)
6. [Sunell] Fixed the issue that causes frame rate to double when enabling audio functions.
NVRsolo:
1. [Axis] Dewarp function now supports Axis M3007 camera.
2. [Arecont] Fixed the display mosaic issue on Arecont AV10115 when switching to D/N mode
in live view.
3. [D-Link] Corrected possible issues caused by dual stream connection with D-link DCS-2210
camera.
4. [Messoa] Messoa PRO series cameras are now correctly labeled as "Messoa Pro" cameras.
5. [Messoa] Messoa NCB858 is now correctly labeled. (previously labeled as NCR858)
6. [Sunell] Fixed the issue that causes frame rate to double when enabling audio functions.
Titan NVR:
1. [Axis] Dewarp function now supports Axis M3007 camera.
2. [Arecont] Fixed the display mosaic issue on Arecont AV10115 when switching to D/N mode
in live view.
3. [D-Link] Corrected possible issues caused by dual stream connection with D-link DCS-2210
camera.
4. [Messoa] Messoa PRO series cameras are now correctly labeled as "Messoa Pro" cameras.
5. [Messoa] Messoa NCB858 is now correctly labeled. (previously labeled as NCR858)
6. [Sunell] Fixed the issue that causes frame rate to double when enabling audio functions.
Crystal Titan:
1. [Axis] Dewarp function now supports Axis M3007 camera.
2. [Arecont] Fixed the display mosaic issue on Arecont AV10115 when switching to D/N mode
in live view.
3. [D-Link] Corrected possible issues caused by dual stream connection with D-link DCS-2210
camera.
4. [Messoa] Messoa PRO series cameras are now correctly labeled as "Messoa Pro" cameras.
5. [Messoa] Messoa NCB858 is now correctly labeled. (previously labeled as NCR858)
6. [Sunell] Fixed the issue that causes frame rate to double when enabling audio functions.
6 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 6
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v3.1.0 (2014/3/5)
Modules:
Device Pack
v 3.1.0
Supported Systems:
Mainconsole
v 4.1.12 and above*
NVRmini 2
v 1.7.1 and above**
NVRsolo
v 1.1.1 and above**
Titan NVR
v 1.6.2 and above
Crystal Titan
v 2.0.3 and above
*For Mainconsole multi stream and setting function, please upgrade to Mainconsole v5.0.0 and
above first.
**For NVRmini 2 and NVRsolo multi stream setting function, please upgrade to NVRmini 2/NVRsolo
v2.0.0 and above first.
New Camera Supported:
ACTi
E96 (fisheye camera) and Generic model
Alarm.com
ADC-V520, ADC-V620PT and ADC-VS420
Arecont
AV1455, AV2146, AV2225, AV2226, AV2245, AV2246, AV3225, AV3226,
AV3245 and AV3246
Axis
P1353-E, P1355-E, P1357, Q1931-E and Q6042
Dahua
IPC-HD2100 and IPC-HFW3200C
DlinkCN
DCS-H70-22D
Fine
ACM-V3103, TCP-HVB3105D and TCP-MZ602
GE
TVC-M1245E-2M-P
Levelone
FCS-3062 and FCS-4042
Messoa
NCR870 and NDF820
Samsung
SND-6084R, SNO-6084R, SNV-6012M and SNV-6084R
Sony
SNC-EM632R, SNC-VB635, SNC-WR630 and SNC-WR632
Vision Hitech
M2TiA, MTi, VD102i, VD10M2, VN10M2 and VN200i
Vista
VK2-1080VRDIR3V9F
Vivotek
FD8371EV, FE8174, FE8174V and VS8100
Zavio
F3215 and P6210
7 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 7
NVR Device Pack Release Note
NUUO version 3.2.1
FW upgrade:
Arecont
AV1115, AV1125, AV1145, AV1255, AV1305 , AV2115, AV2805,
AV3105 and AV3115 (65225)
Dlink
DCS-2132LB1 (FW v2.00.05) and DCS-3112 (FW v1.11.01)
Panasonic
WV-SW174W (FW: 1.81)
Samsung
SNB-6004, SND-6084 (1.00_130316)
New Feature:
NVRmini 2/NVRsolo:
1. Support multi stream setting function with NVRmini 2/NVRsolo v2.0.0 and above on
Arecont camera and Vivotek 8000 series from DP v3.1.0.
2. Support multi stream setting function with requested cameras. (please refer to
http://www.nuuo.com/SupportCamera.php?node_id=4#4)
3. Support audio out function with NVRmini 2/NVRsolo v2.0.0 and above on Axis PQM series,
Sony 6th generation and Vivotek 8000 series.
Notice:
1. Fine:
b.
ACM-V3103, TCP-HVB3105D
i.
The camera is unable to achieve 20 fps with a resolution of 2046x1536. (camera
firmware issue)
ii.
The video stream with MJPEG format will be disconnected when disable the MJPEG
option on camera’s web.
iii.
Support zoom and focus.
2. Arecont:
a.
AV1115
i.
b.
DI and DO cannot work.
AV3115
i.
DO cannot work.
3. Alarm.com:
a.
ADC-V520
i.
The resolution list is not synchronized with the one on camera’s web. (camera
firmware issue).
ii.
The camera with high resolution and quality/ bitrate is unable achieve to 30fps with
MJPEG format and TCP protocol.
iii.
b.
The video stream will be disconnected with a setting of MPEG4 and 20kbps bitrate.
ADC-V620PT
8 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 8
NVR Device Pack Release Note
NUUO version 3.2.1
i.
The resolution list is not synchronized with the one on camera’s web. (camera
firmware issue).
ii.
Main stream cannot achieve high fps when use high resolution (1280x720 or
higher) and high quality/ bitrate.
4. DlinkCN
a.
DCS-H70-22D
i.
The resolution list is not synchronized with the one on camera’s web. (camera
firmware issue).
ii.
The camera is unable to achieve 15fps or above with some resolutions. (camera
firmware issue)
5. Dlink
a.
DCS-2132LB1
i.
Motion detection may not trigger continuously within short period of time. (camera
firmware issue)
b.
DCS-3112
i.
With MPEG4 format, the resolution list is not synchronized with the one on
camera’s web. (camera firmware issue).
ii.
Under multi stream function, low and min stream cannot reach 500 kbps and 100
kbps.
6. Panasonic:
a.
WV-SW174W
i.
MJPEG frame rate will be impacted by H.264 stream. If enable H.264 stream on
main or low stream, MJPEG stream can only support up to 5 fps.
7. Zavio:
a.
F3215
i.
Not support MPEG4 format. (camera firmware issue)
ii.
Audio out will stutter.
8. Dahua:
a.
IPC-HFW3200C
i.
The list of bit rate and frame rate is not synchronized with the one on camera’s web.
This may cause stream parameter setting fail. (camera firmware issue)
ii.
Enable motion detection under MJPEG mode may cause liveview image to freeze.
iii.
The audio will stutter under PCM format.
iv.
The audio will stutter under G.711Mu and G.711A format.
v.
With UPnP search the camera will search incorrect MAC address. (NVRMini
2/NVRsolo/Titan NVR/Crystal Titan)
9 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com 9
NVR Device Pack Release Note
NUUO version 3.2.1
vi.
The bit rate of the cameras is not configurable on NVRSolo/NVRMini2 v2.0.0 web
client with DP v3.1.0, but can be setup with NVRsolo local site.
b.
IPC-HD2100
i.
The list of bit rate and frame rate is not synchronized with the one on camera’s web.
This may cause stream parameter setting fail. (camera firmware issue)
ii.
Enable motion detection under MJPEG mode may cause liveview image to freeze.
iii.
With UPnP search the camera will get incorrect MAC address. (NVRMini
2/NVRsolo/Titan NVR/Crystal Titan)
iv.
The bit rate of the cameras is not configurable on NVRsolo/NVRMini2 v2.0.0 web
client with DP v3.1.0, but can be setup with NVRsolo local site.
9.
VisionHitech
i.
Main stream support H.264 format, low/min stream support H.264 and MJPEG.
(NVRMini 2/NVRsolo/Titan NVR/Crystal Titan)
ii.
M2TiA series under H.264 format cannot setup D1resolution. (camera firmware
issue)
iii.
It is invalid setting on brightness. (Mainconsole)
iv.
NUUO use dual mode as default connection mode.
v.
It does not support the resolution setting for MJPEG. (Mainconsole)(camera
firmware issue)
10. IP Power
i.
With NVRsolo v2.0.0 and above with DP v3.1.0 can select camera model on local
site.
Bug fixed:
Mainconsole:
15. [Hikvision] Fixed the issue that camera will become manual focus mode when reconnecting
the camera or restarting Mainconsole.
16. [Dlink] Fixed the issue on DCS-5615 that the default brightness setting is not synchronized
with the camera’s web.
17. [Dlink] Fixed the issue on DCS-942L that the stream format and frame rate is not
synchronized with Mainconsole settings.
18. [Vivotek] Fixed the issue on VS8401 / VS8801 that only the first channel of the camera is
connectable.
NVRmini 2:
1. [Onvif] Fixed the issue that Onvif/Onvif will use first profile for default connecting profile.
2. [Vitek] Fixed UPnP search fail issue.
10 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com10
NVR Device Pack Release Note
NUUO version 3.2.1
3. [Hikvision] Fixed the issue that the camera parameters are not changed by generic model.
4. [Axis] Fixed the issue that the camera will disconnected when changing grid layout.
5. [CNB] Fixed the issue that the multi stream is disconnected.
6. [Centrix] Fixed the issue that the multi stream information is incorrect displayed for generic
model.
NVRsolo:
1. [Onvif] Fixed the issue that Onvif/Onvif will use first profile for default connecting profile.
2. [Vitek] Fixed UPnP search fail issue.
3. [Hikvision] Fixed the issue that the camera parameters are not changed by generic model.
4. [Axis] Fixed the issue that the camera will disconnected when changing grid layout.
5. [CNB] Fixed the issue that the multi stream is disconnected.
6. [Centrix] Fixed the issue that the multi stream information is incorrect displayed for generic
model.
Titan NVR:
1. [Onvif] Fixed the issue that Onvif/Onvif will use first profile for default connecting profile.
2. [Vitek] Fixed UPnP search fail issue.
3. [Hikvision] Fixed the issue that the camera parameters are not changed by generic model.
4. [Axis] Fixed the issue that the camera will disconnected when changing grid layout.
5. [CNB] Fixed the issue that the multi stream is disconnected.
6. [Centrix] Fixed the issue that the multi stream information is incorrect displayed for generic
model.
Crystal Titan:
1. [Onvif] Fixed the issue that Onvif/Onvif will use first profile for default connecting profile.
2. [Vitek] Fixed UPnP search fail issue.
3. [Hikvision] Fixed the issue that the camera parameters are not changed by generic model.
4. [Axis] Fixed the issue that the camera will disconnected when changing grid layout.
5. [CNB] Fixed the issue that the multi stream is disconnected.
6. [Centrix] Fixed the issue that the multi stream information is incorrect displayed for generic
model.
11 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com11
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v3.0.1 (2014/02/14)
Modules:
Device Pack
v 3.0.1
Supported Systems:
NVRmini 2
v 1.7.1 and above
Bug fixed:
NVRmini 2:
1. Fixed the issue that cannot login web client.
12 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com12
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v3.0.0 (2014/2/5)
Modules:
Device Pack
v 3.0.0
Supported Systems:
Mainconsole
v 4.1.12 and above*
NVRmini 2
v 1.7.1 and above
NVRsolo
v 1.1.1 and above
Titan NVR
v 1.6.2 and above
Crystal Titan
v 2.0.3 and above
*For Mainconsole multi stream and setting function, please upgrade to Mainconsole v5.0.0 and
above first.
New Camera Supported:
Arecont
AV3145 , AV5245 and Generic model
Axis
M3025, M3026 and P5415
Dlink
DCS-6045L
Dynacolor
NH720-20N8 and NH820-20N8
Eneo
PXB-2180Z03, PXC-2080CS and PXC-2080Z03
Fine
CDB-HFD720, CDB-MV720F-H, CDV-MD602, CDV-P360-5 (fisheye camera),
TCP-BF128, TCP-HDVB720-H and TCP-MB602
Samsung
SNB-5003, SNB-5004, SND-5083, SND-5084 and SNV-5084
Sony
SNC-EB600, SNC-EB600B, SNC-EB630B, SNC-EM601, SNC-EM602R,
SNC-EM630, SNC-EM631, SNC-EM632R, SNC-VB635, SNC-VM601,
SNC-VM602R, SNC-VM631 and SNC-VM632R
Sunell
SN-IPR54/31UDN
Truen
TN-B200CE, TN-B202CEIR, TN-D1202CE, TN-P1220CS, TN-P1222CGPLX,
TN-P1230CS, TN-P3220CS, TN-P3220CSIR and TN-P3220CTIR
Vivotek
FD8137H, FD8137HV and IP8364
Zavio
B7510 and D4210
13 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com13
NVR Device Pack Release Note
NUUO version 3.2.1
FW upgrade:
Axis
P7210 (FW 5.50.2)
Centrix
Generic model (FW cx20131107NSA)
Dlink
DCS-3010, DCS-3714 and DCS-5222LB1(FW : v1.11.00)
Eneo
PXB-1080Z03, PXB-2080MIR, PXB-2080Z03, PXD-2080MIR and
PXD-2080Z03
(FW 4.23.49-ds)
Sony
SNC-EM600, SNC-VB630 and SNC-VM630
New Feature:
Mainconsole:
1. Support multi stream setting function with Mainconsole v5.0.0 and above on Axis PQM series,
Arecont all series, Vivotek 8000 series and Samsung SNB-5003, SNB-5004, SND-5083,
SND-5084 and SNV-5084 from DP v3.0.0.
2. Support multi stream function with requested cameras. (please refer to
http://www.nuuo.com/SupportCamera.php?node_id=4#4)
Enhancement:
1. Adjust Samsung camera SNP-3120V, SNP-3430H, SNZ-5200, SPE-100 PTZ speed to 3 or 1.
2. D-Link China camera DCS-V70M-21H, DCS-V70M-21H2 multi-stream:
i.
Adjust fps range from 15 to 20.
ii.
Adjust 2nd stream resolution to 640x480.
iii.
Adjust 2nd stream bitrate to 1000kbps.
Notice:
11. Samsung:
a.
SNB-5003, SNB-5004, SND-5083, SND-5084 and SNV-5084 :
i.
Support 64 preset points.
ii.
Default value of Talk will setup to 5.
iii.
When change audio setting on camera web, the previous connection will be
interrupted and re-connect. (camera firmware issue)
12. Dynacolor
a.
NH820-20N8, NH720-20N8
i.
When using MJPEG format, camera reply is slow. (camera firmware issue)
ii.
It would not support motion detection when camera resolution is 1920x1080 (Low
Latency). (camera firmware issue)
14 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com14
NVR Device Pack Release Note
NUUO version 3.2.1
iii.
Camera does not support MJPEG format with 1280x720 (Low Latency). (camera
firmware issue)
13. Sunell
a.
SN-IPR54/31UDN
i.
Due to Onvif limitation, some framerate and bitrate cannot setup.
14. Fine
a.
CDV-MD602
i.
Motion detection may fail when select 30 fps mode. (camera firmware issue)
15. D-Link
a.
DCS-3010
i.
Motion detection may fail after setting camera parameter. (camera firmware issue)
ii.
Camera may not work when setup bitrate to 8000kbps. (camera firmware issue)
iii.
Not support dual stream.
iv.
The live view may delay when setup high resolution. (camera firmware issue)
b.
DCS-5222LB1
i.
Not support talk. (camera firmware issue)
ii.
Not support preset. (camera firmware issue)
iii.
Direction of PTZ is opposite. (camera firmware issue)
iv.
The live view may delay when setup high resolution. (camera firmware issue)
c.
DCS-3714
i.
d.
Not support 8M bitrate. (camera firmware issue)
DCS-6045L
i.
It may need to reboot again after a period of time. (camera firmware issue)
16. Arecont
a.
Due to camera performance, camera fps may not reach to the frame rate configuration.
b.
Audio function may not work after connect/disconnect, and need to reboot camera.
17. Eneo
a.
Only support RTSP port 554 (camera firmware issue)
b.
Only integrate NTSC mode.
c.
Audio will be discontinuous under fps 1.
d.
Camera fps may not reach to camera setting under high resolution, frame rate and
quality.
e.
Not support brightness, contrast, saturation on Mainconsole (camera firmware issue)
f.
Audio out is not supported with Mainconsole (camera firmware issue)
15 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com15
NVR Device Pack Release Note
NUUO version 3.2.1
Bug fixed:
Mainconsole:
19. [Onvif] Fixed the issue that causes Mainconsole error when adding cameras
NVRmini 2:
1. [IPPower] Fixed the issue that causes live view delay and incorrect camera fps display.
2. [Vivotek] Fixed the issue that causes FD8136 dual stream do not display correctly.
3. [RTSP] Fixed the issue that CPU loading will increase after audio function turn off.
NVRsolo:
1. [IPPower] Fixed the issue that causes live view delay and incorrect camera fps display.
2. [RTSP] Fixed the issue that CPU loading will increase after audio function turn off.
Titan NVR:
1. [IPPower] Fixed the issue that causes live view delay and incorrect camera fps display.
2. [Sony] Fixed the issue that causes Sony camera to disconnect.
3. [RTSP] Fixed the issue that CPU loading will increase after audio function turn off.
Crystal Titan:
1. [Sony] Fixed the issue that causes Sony camera PTZ speed delay.
2. [IPPower] Fixed the issue that causes live view delay and incorrect camera fps display.
3. [RTSP] Fixed the issue that CPU loading will increase after audio function turn off.
16 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com16
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.20.0 (2013/12/26)
Modules:
Device Pack
v 2.20.0
Supported Systems:
Mainconsole
v 4.1.12 and above
NVRmini 2
v 1.7.1 and above
NVRsolo
v 1.1.1 and above
Titan NVR
v 1.6.2 and above
Crystal Titan
V 2.0.0 and above
New Camera Supported:
Arecont
AV2256 and AV2456
Aver
FB2027-1, FB2027-2, FB2027-3, FB2028, FB2028-T1, FB2028-T2, FB2028-TM,
FB3027, FB3028-RT1, FB3028-RT2, FB3028-RTM, FD2020, FD3020, FD3020-M
FV2006, FV2028, FV3028, FV3028-RT, FV3028-RTM, FX2000, FX3000-R,
SF2121H-BHR-30, SF2121H-BHR-50 and SF2121H-R
Axis
M3024-L, P5414, Q1765-LE, Q6044 and Q6045
Dlink
DCS-5222LB1
DlinkCN
DCS-H41-11D/I and DCS-H41-12D/I
Dynacolor
NA083 (fisheye camera)
Fine
MD-D3622Q-H, SP-HP2330Q-IP, TCP-336AM, TCP-IRH5080-50 and
TCP-IRH5080-70
Forenix
IPB-1080BL, IPB-1080BM, IPD-1080CD, IPV-1080CD and IPX-1080DN
Hikvision
DS-2CD7253F-EIZ
Messoa
NCR858, NCR878, NDF821, NDF821PRO, NDF831, NDF831PRO and
NDR891PRO
Pelco
D5220, IL10 and IM10
Sony
SNC-EB630, SNC-EM600, SNC-VM600 and SNC-VM630
Vivotek
FD8135H, FD8164, FD8164V, SD83x4, SD83x6
FW upgrade:
Dlink
DCS-2310L, DCS-2332L and DCS-6010L (FW V1.02.00)
MegaIP
NCD-2003PR and NMX-2003P (FW mega-web-51110.2.1262.100.bin )
Santec
SNC-3302, SNC-3322, SNC-4302, SNC-6202, SNC-6302,
17 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com17
NVR Device Pack Release Note
NUUO version 3.2.1
SNC-6315IRH and SNC-8322I/HO (firmware_1.0.3.447)
Sony
SNC-VB600 (FW 1.9.2)
Enhancement:
3. Add Brickcom FD-301Af and VD-301Af to 50xA model
Notice:
18. IP Power:
a.
Generic:
i.
Focus function does not test with NUUO product.
19. Hikvision:
a.
DS-2CD7253F-EIZ
i.
Only supports zoom in/out in the PTZ-control.
ii.
When resolution is 1600x1200 and 1600x912, the range of framerate does not
synchronize with web.
iii.
2nd stream format must be the same with main stream except MJPEG.
iv.
UPnP search cannot get a valid mac address. (NVRmini 2/NVR Solo/Titan
NVR/Crystal Titan)
20. Aver
a.
MJPEG could not reach to the framerate which user setups. (camera performance issue)
b.
UPNP search failure when change web port from 80 to others.
21. Sony
a.
In certain scenarios i.e. under high frame rate or resolution, camera might have
limitation. For further information, please visit Sony A&E Portal:
https://www.security.sony.biz/ssp/ae/homeDisplay.do (SNC-EB630, SNC-EM600,
SNC-VB600, SNC-VM600 and SNC-VM630)
b.
Audio (G726 40kbps, 32kbps, 16kbps) is non-smooth or muted with Titan NVR
(SNC-VB600, SNC-VM600 and SNC-VM630)
22. Messoa
a.
It takes 10 sec or more to setup parameter setting.
b.
It will get wrong parameter setting after setup.
c.
Not support talk. (Mainconsole)
d.
Not support auto detection. (NVRmini 2/NVR Solo/Titan NVR/Crystal Titan)
23. D-Link
a.
DCS-6010L:
i.
When finish resolution parameter setting, fisheye setting will random set back to
default setting (Mount type: Desktop; Display Mode: 4R). (Mainconsole)
18 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com18
NVR Device Pack Release Note
NUUO version 3.2.1
b.
DCS-2332L, DCS-2310L
i.
Bitrate List will not change by select different resolution.
24. Vivotek
a.
FD8164
i.
Brightness and Contrast range from -5 to 5 instead of 0 to 100 in web. (camera
firmware issue)
b.
SD8316E
i.
Brightness and Contrast range from -5 to 5 instead of 0 to 100 in web. (camera
firmware issue)
c.
FD8135H
i.
Resolution list does not synchronize with the list on web. (camera firmware issue)
ii.
When format is setup to MPEG4, resolution is 1280 x 800 and quality is best, the
maximum FPS can only reach 20. (NVRmini 2/NVR Solo/Titan NVR/Crystal Titan)
(camera firmware issue)
25. Fine
a.
MD-D3622Q-H:
i.
When use Pan speed bar to control Pan speed, Tilt speed will be the same.
(Mainconsole)
b.
TCP-336AM:
i.
When format is MPEG4, resolution is 1920 x 1080 and quality is excellent, the
maximum FPS can only reach 20.
26. Pelco
a.
D5220
i.
Preset point name cannot change, and will not synchronize with camera web.
(Mainconsole)
ii.
Video parameter (brightness, contrast, saturation) will not synchronize with
camera web. (Mainconsole)
iii.
When resolution or quality is high, framerate would not reach its setting.
(Mainconsole)
iv.
It may cause Mainconsole unstable when change protocol. (UDP->HTTP,
HTTP->UDP)
b.
IM10 and D5220
i.
It will need to disable second profile on web first and parameter setting can be
changed.
27. MegaIP
a.
Getting bitrate value would not synchronize with camera web. (Camera onvif issue)
19 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com19
NVR Device Pack Release Note
NUUO version 3.2.1
b.
Setting quality value would not synchronize with camera web. (Camera onvif issue)
c.
After setting parameter on camera, camera would restart. After it completed, then can
get parameter setting.
d.
Only when http port is 80, motion detection and DI/DO can work.
Bug fixed:
Mainconsole:
1. [D-Link] Fixed VBR setting issue.
NVRmini 2:
1. [Fine] Fixed the issue that TCP-HFB1080D does not support UPnP.
2. [Samsung] Adjusted SNP-5300 PTZ default speed to 3.
3. [Sony] Fixed the issue that all Sony cameras might disconnect.
NVRsolo:
1. [Fine] Fixed the issue that TCP-HFB1080D does not support UPnP.
2. [Samsung] Adjusted SNP-5300 PTZ default speed to 3
3. [Sony] Fixed the issue that all Sony cameras might disconnect.
Titan NVR:
1. [Fine] Fixed the issue that TCP-HFB1080D does not support UPnP.
2. [Sony] Fixed the issue that all Sony cameras might disconnect.
3. [Samsung] Adjusted SNP-5300 PTZ default speed to 3
Crystal Titan:
1. [Sony] Fixed the issue that all Sony cameras might disconnect.
20 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com20
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.19.0 (2013/11/26)
Modules:
Device Pack
v 2.19.0
Supported Systems:
Mainconsole
v 4.1.12 and above
NVRmini 2
v 1.7.1 and above
NVRsolo
v 1.1.1 and above
Titan NVR
v 1.6.2 and above
New Camera Supported:
3Svision
N1011, N1012, N1031, N1032, N3011, N3012, N3031, N3032, N6011,
N6012 ,N6013, N6014, N6015, N6016, N6031, N6032, N6033, N6034, N6035,
N6036, N6037, N6038, N8011, N8012, N8031, N8032, N9012, N9032, N9033
and N9034
Arecont
AV5455DN-F, AV3456DN-F
Axis
M2014
DigitalWatchdog
DWC-MD421 and DWC-MV421
Dlink
DCS-2330L, DCS-2132LB1, DCS-3714, DCS-5615 and DCS-7110B1
Fine
TCP-HFB1080D
Hikvision
DS-2CD2612F-IS, DS-2CD2632F-IS, DS-2CD2712F-IS and DS-2CD2732F-IS
i-Mege
G1102E
IP Power
Generic
Mobotix
D15D-Sec, D15D-Sec-DNight, D15D-Sec-Night-Pano, D15D-Sec-Pano,
Generic, M15D-Sec, M15D-Sec-DNight, M15M-Sec, S14D-Sec,
S14D-Sec-Night, S14M-Sec, S15D-Sec, S15M-Sec and S15M-Sec-Night
Neovista
NV-CB1-36, NV-DP1RP-3312-15, NV-CB1R-36-6, NV-CB1RW-36-6,
NV-CB3PL-28, NV-CB3WL-28, NV-DM1P-28, NV-BT3RP-3105-30 and
NV-PT13RP-4-15
RIVA
RC1100, RC1100M, RC1202HD, RC2100M, RC2102HD, RC302HD, RC3100,
RC3102HD, RC3203HD, RC3302, RC3500, RC3500M, RC3502HD,
RC3502HDIR, RC3702, RC4100, RC5500, RC5510, RC6500, RC6602HD,
RC6700, RC6802HD, RCC100HD, RE1000 and RE4000
Sunell
SN-VSR54/04
Vivotek
IP8173H, IP8337H and IP8336W
21 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com21
NVR Device Pack Release Note
NUUO version 3.2.1
Zavio
V1100
FW upgrade:
ATV
IPFD2MT (FW HSNCT3-v2.1.71)
Santec
SNC-3305, SNC-5312IR, SNC-5315IR, SNC-6212IR, SNC-6312IRH,
SNC-6315IRH (firmware_1.0.2.386)
Hikvision
DS-2CD7153-E
Enhancement:
1. Add Brickcom OB-300-NP-AD with zoom and focus to 30xN model
2. Add Brickcom OSD-200 to 20xP model
Notice:
1. IP Power:
a.
Generic:
i.
Focus function is not test on NUUO product.
ii.
The maximum resolution is depends on camera.
iii.
Some framerate and bitrate cannot setup due to Onvif restriction.
2. i-Mege:
a.
G1102E :
i.
No support on-edge motion when video format is MJPEG.
ii.
Support UPnP Search after Mainconsole v4.1.18.
iii.
Camera connection is not stable. (firmware issue)
3. Mobotix:
a.
D15D-Sec, D15D-Sec-DNight, D15D-Sec-Night-Pano, D15D-Sec-Pano, M15D-Sec,
M15D-Sec-DNight, M15M-Sec, S14D-Sec, S14D-Sec-Night, S14M-Sec, S15D-Sec,
S15M-Sec and S15M-Sec-Night
i.
Please setup on Mobotix web setting page first for display mode, ExtIO and
on-edge motion.
ii.
Not support audio when video format is MJPEG.
4. Hikvision:
a.
DS-2CD2732F
i.
When resolution is 2048x1536, the range of framerate does not synchronize with
web.
b.
DS-2CD7153-E
22 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com22
NVR Device Pack Release Note
NUUO version 3.2.1
i.
When resolution is 1600x1200, the range of framerate does not synchronize with
web.
ii.
Except MJPEG, 2nd stream format will be the same as main stream format.
5. Santec:
a.
SNC-3305, SNC-5312IR, SNC-5315IR, SNC-6212IR, SNC-6312IRH, SNC-6315IRH
i.
When resolution is 2048x1536 and PAL mode, the range of framerate does not
synchronize with web.
ii.
With high resolution there is noise with audio.
iii.
The bitrate of 2nd stream, minimum mode, is 200Kbps. (firmware issue)
6. Sunell:
a.
Audio only available on channel 1 and channel 2.
b.
DI2 cannot work correctly.
7. Fine:
a.
The response of camera setting is slow.
b.
Not support UPnP search on NVRmini 2, NVRsolo and Titan NVR.
8. Zavio:
a.
Audio in/out does not support AMR.
9. D-Link:
a.
DCS-2132LB1 and DCS-2330L do not support TCP/UDP. (firmware issue)
b.
DCS-2330L does not support talk. (firmware issue)
Bug fixed:
Mainconsole:
1. [Onvif/Onvif] Fixed the issue that Mainconsole will dump when connecting.
2. [Santec] Fixed the issue that SNC-4302, SNC-8322I/HO, SNC-3322 will dump when
connecting.
3. [Fine] Fixed the issue that TCP-MH859 does not support MJPEG with resolution 2048x1536
and 2592x1944.
4. [Vivotek] Fixed multicast stream issue.
5. [Axis] Fixed the issue that P8221 output cannot work.
NVRmini 2:
1. [Fine] Fixed the issue that TCP-MH859 does not support MJPEG with resolution 2048x1536
and 2592x1944.
2. [Vivotek] Fixed multicast stream issue.
3. [Axis] Fixed M3007 unable to connect issue.
23 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com23
NVR Device Pack Release Note
NUUO version 3.2.1
4.
[Axis] Fixed the issue that P8221 output cannot work.
NVRsolo:
1. [Fine] Fixed the issue that TCP-MH859 does not support MJPEG with resolution 2048x1536
and 2592x1944.
2. [Vivotek] Fixed multicast stream issue.
3. [Axis] Fixed M3007 unable to connect issue.
4. [Axis] Fixed the issue that P8221 output cannot work.
Titan NVR:
1. [DynaColor] Fixed the issue that Live View shows “No Data” on the iViewer issue.
2. [Hikvision] Fixed the issue that Generic model motion does not work issue.
3. [Fine] Fixed the issue that TCP-MH859 does not support MJPEG with resolution 2048x1536
and 2592x1944.
4. [Vivotek] Fixed multicast stream issue.
5. [Axis] Fixed M3007 unable to connect issue.
6. [Axis] Fixed the issue that P8221 output cannot work.
24 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com24
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.18.0 (2013/10/28)
Modules:
Device Pack
v 2.18.0
Supported Systems:
Mainconsole
v 4.1.12 and above
NVRmini 2
v 1.7.1 and above
NVRsolo
v 1.1.1 and above
Titan NVR
v 1.6.2 and above
New Camera Supported:
Arecont
AV2455DN-F
ATV
HDG-M120 and IPFD2MT
Brickcom
MD-300Np-360 and MD-500Ap-360 (fisheye camera)
Dlink
DCS-940L
DlinkCN
DCS-V70M-21H2
Eneo
PXB-2080MIR, PXD-2080MIR and PXD-2080Z03
Etrovision
EV8582U-BL, N51A-ML, N50U-ML, N51U-ML and N71U-ML
Fine
TCP-MH859
Forenix
FBX-200CL, FBU-201LWD and FDM-200LWD
Hikvision
DS-2CD2212-I3, DS-2CD2612F-I, DS-2CD2712F-I
Honeywell
H3D1F and H3D2F
Levelone
WCS-0050
Panasonic
DG-SC385
Samsung
SNF-7010 (fisheye camera) and SND-3082
Vivotek
IP8371E
FW upgrade:
Forenix
FBU-200LWD, FBX-200LWD and FVD-200LWD
Hikvision
DS-2CD2112-(I), DS-2CD2212-I5 and DS-2CD2312-I (FW 5.0.2)
Sony
SNC-CH120 (FW 1.80)
DlinkCN
DCS-N40M-22H3, DCS-V40M-12H, DCS-N70M-21H3,
DCS-N31M-21H3 DCS-V40M-32H2, DCS-V70M-11H and
DCS-V70M-21H2 (VB1.0.29)
25 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com25
NVR Device Pack Release Note
NUUO version 3.2.1
Everfocus
EDN1220 and EDN1320 (FW 1.0.8)
Zavio
B7320 (FW M3.1.5.17)
Notice:
1. EverFocus:
a.
EDN1220, EDN1320: Not support Mpeg4 (Firmware issue)
b.
EDN1320: Not support 160x128 in profile3 (Firmware issue)
2. Fine:
a.
TCP-MH859: Not support M-Jpeg with resolution 2048x1536 and 2592x1944.
3. ATV:
a.
HDG-M120: Does not implement Audio-out (Talk)
b.
HDG-M120: UPNP search failure if changed web port 80 to others
c.
HDG-M120: Not support UDP connection
d.
HDG-M120: Camera reply slowly if set maximum video parameters
e.
HDG-M120: The bitrate of stream 3 setup will fail at 100 kbps, but work at 200 kbps.
f.
IPFD2MT: Not support UPNP search
g.
IPFD2MT: MJPEG could not setup 1280x1024 and 1280x720 resolution at web, but
camera still reply OK.
4. Hikvision:
a.
DS-2CD2012-I: Sub stream resolution must be smaller than Main stream resolution.
5. Sony:
a.
SNC-CH120: Not support SolidPTZ mode
6. Brickcom:
a.
30xN: It does not support talk, IO on MD-300Np-360.
b.
30xN: It does not support MD when format is MJPEG and MPEG4 on MD-300Np-360.
c.
50xA: It does not support talk on MD-500Ap-360
d.
50xA: It does not support MD when format is MJPEG and MPEG4 on MD-500Ap-360.
7. Forenix:
a.
It does not support UPnP and auto detection.
b.
Camera will crash if open camera web under win XP.
c.
The setting of brightness was wrong via CGI command. It will sync setting of grayscale.
d.
The sound is weak with audio under format G.726.
8. Etrovision:
a.
N71U-ML, N50U-ML, N51U-ML and N50A-ML
i.
Only support focus and zoom.
ii.
It is noise with audio.
26 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com26
NVR Device Pack Release Note
NUUO version 3.2.1
iii.
Only support motion under H.264.
iv.
Not support talk.
v.
Dual stream will disconnect if main stream sets MPEG4, 1080P and FPS over 20.
b.
EV8582U-BL
i.
Only support motion under H.264.
9. Zavio:
a.
Not support audio in.
10. Arecont:
a.
AV2455DN (fw65220) would reboot after connecting DO port.
b.
AV2455DN (fw65220) cannot reach 30fps due to camera performance issue.
11. Honeywell:
a.
H3D2F: Only support Zoom and Focus, not support Pan and Tile. (Mainconsole)
b.
H3D2F: Only support Zoom, not support Pan and Tile. (NVRmini 2, NVRsolo, Titan NVR)
Bug fixed:
Mainconsole:
1. [Onvif/Onvif] Fix the issue that it will cause Mainconsole crash when get incorrect preset
name.
2. [DLinkCN] Fix the issue that it will not work on Pan, tilt with DCS-H90-31D2.
3. [D-Link] Fix DI/DO fail issue with DCS-6915.
4. [Hikvision] Fix the issue that it will cause crash when get incorrect RTSP video packet.
NVRmini 2:
1. [D-Link] Fix dual stream disconnect issue on DCS-5010L.
2. [Samsung] Fix the issue that the motion detection does not work on SNO-7082.
3. [Vivovtek] Fix VS8801 dual stream incorrect channel display issue.
4. [Axis] Fix P5532-E dual stream disconnect issue.
5. [Hikvision] Fix the issue that it will cause crash when get incorrect RTSP video packet issue.
NVRsolo:
1. [Samsung] Fix the issue that the motion detection does not work on SNO-7082.
2. [Vivovtek] Fix VS8801 dual stream incorrect channel display issue.
3. [Axis] Fix P5532-E dual stream disconnect issue.
4. [Hikvision] Fix the issue that it will cause crash when get incorrect RTSP video packet issue.
27 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com27
NVR Device Pack Release Note
NUUO version 3.2.1
Titan NVR:
1. [Fine] Fix dual stream disconnect on WB-H814 issue.
2. [Samsung] Fix the issue that the motion detection does not work on SNO-7082.
3. [Vivovtek] Fix VS8801 dual stream incorrect channel display issue.
4. [Axis] Fix P5532-E dual stream disconnect issue.
5. [Hikvision] Fix the issue that it will cause crash when get incorrect RTSP video packet issue.
28 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com28
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.17.1 (2013/09/30)
Modules:
Device Pack
v 2.17.1
Supported Systems:
NVRmini 2
v 1.7.1 and above
NVRsolo
v 1.1.1 and above
Titan NVR
v 1.6.2 and above
Bug fixed:
NVRmini 2:
2. Fix that ACTi camera dump issue.
NVRSolo:
1. Fix that ACTi camera dump issue.
Titan NVR:
1. Fix that ACTi camera dump issue.
29 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com29
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.17.0 (2013/09/26)
Modules:
Device Pack
v 2.17.0
Supported Systems:
Mainconsole
v 4.1.12 and above
NVRmini 2
v 1.7.1 and above
NVRsolo
v 1.1.1 and above
Titan NVR
v 1.6.2 and above
New Camera Supported:
Axis
M7010, P1214, P3353 and Q7411
Dlink
DCS-7413 B1
DlinkCN
DCS-N20M-10H2, DCS-N30M-51H2, DCS-N40M-53H2, DCS-N70M-20H2,
DCS-N40M-32H2, DCS-V30M-50H, DCS-V30M-51H, DCS-V40M-32H,
DCS-V40M-33H, DCS-V70M-20H, DCS-V70M-21H, DCS-V70M-50H and
DCS-N70M-50H2
InscapeData
NVC3033H-DN and NVC360H-DN-IR
Levelone
FCS-5061, FCS-3101 and FCS-4101
Panasonic
BB-ST162, BB-SW172, BL-VT104W, BL-VP164W, DG-SF132, DG-SP102 and
WV-SF438 (fisheye camera)
Samsung
SNP-5300, SNP-6200RH
Sony
SNC-CX600W, SNC-VB600B, SNC-VM600B and Generic
Vivotek
IP8130, IP8130W, IP8131, IP8131W and SD8363E
FW upgrade:
Arecont
AV1115, AV1125, AV1145, AV1255, AV2115, AV3115, , AV3125,
AV5125, AV10115, AV10255 (FW 65218), AV3116 (FW 65219),
AV5155 (FW 65152), AV8365, AV20185 and AV20365 (FW 65183)
Dlink
DCS-2310L (FW v1.01.10)
Panasonic
WV-SF132, WV-SP102 (1 Application: 1.81, 2 Image date:1.03),
WV-ST162, WV-SW172 (1 Application: 1.81, 2 Image data: 1.04)
Sony
SNC-VB630 (FW 1.7.0)
Vision Hitech
Vision M3i (FW 1.1.2.46), Vision SM3Ti (FW1.1.4.1 20130816) and
Vision Mi(FW 1.1.2.46)
30 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com30
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
1. Feature added:
a.
Support Samsung camera search tool.
Testing model:
1. SNB-3002 / SND-3082/F / SNV-3082
2. SNB-7002 / SND-7082/F / SNV-7082 / SNO-7082R
3. SNV5080R
4. SNO5080R
5. SNB-5000A / SND5080F / SNV5080
6. SNP-5300
7. SNP-6200RH
b.
Dual Stream default format change to H.264 for Arecont camera and Vivotek camera.
c.
For Mini2/Solo/Titan, Arecont cameras do not use TFTP to get stream. Always use RTSP
or HTTP method to get stream.
d.
Samsung dual stream structure changed. When main stream format is H264, dual
stream format will be MJPEG. When main stream format is MJPEG, dual stream format
will be H264.
2. Known issue:
a. It cannot use G726 16kbps on Panasonic talk function.
b. VisionHitech
1.
2.
VISION M3Ti
i.
It can not use Autofocus function. (camera firmware issue)
ii.
It will not support audio setup. (camera firmware issue)
VISION M3i
i.
It can not support Quality with MJPEG. (camera firmware issue)
ii.
The real FPS could not reach original value on Web when setup maximum setting
of camera parameters, for example setting is H.264 within 1920x1080, 30 fps,
and 7 quality but can get 15 fps only; setting is MJPEG within 1280x720, 30fps
but can get 5~6 fps only.
3.
VISION Mi
i.
It will not support audio setup. (camera firmware issue)
ii.
It can not support Quality with MJPEG. (camera firmware issue)
iii.
The real FPS could not reach original value on Web when setup maximum setting
of camera parameters, for example setting is H.264 within 1920x1080, 30 fps,
and 7 quality but can get 15 fps only; setting is MJPEG within 1280x720, 30fps
but can get 5~6 fps only.
31 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com31
NVR Device Pack Release Note
NUUO version 3.2.1
c. Levelone
1.
FCS-3101 and FCS-4101
i.
Not support video parameter. (camera firmware issue)
i.
Not support bitrate 20Kbps.
2.
FCS-5061
i.
It will have talk audio with noise under win XP system issue.
ii.
With the maximum value of video settings (fps, bitrate) change protocol will
cause MainConsole crash.
d. Arecont
1.
When use firmware 65218 Arecont camera needs to be used in close-network.
2.
Arecont camera might not meet the frame setting due to camera performance.
3.
Arecont camera’s dual stream bitrate might be larger than 500kbps due to high
resolution.
Bug fixed:
Mainconsole:
1. Fix that RTSP timeout causes Samsung camera disconnect issue.
2. Fix that Panasonic BL-VT164 cannot use PTZ issue.
3. Fix that DynaColor V6 disconnect issue.
4. Fix that Zavio P5111, P5116, P5210 PTZ speed range is not synchronize between camera
setting and web.
NVRmini 2:
1. Fix that RTSP timeout causes Samsung camera disconnect issue.
Titan NVR:
1. Fix that Samsung SNP-3302/H cannot use PTZ issue.
2. Fix that Hikvision Generic cannot use focus function issue.
3. Fix the issue that original stream will disconnect when switch between original and
low/minimized stream.
32 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com32
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.16.0 (2013/08/26)
Modules:
Device Pack
v 2.16.0
Supported Systems:
Mainconsole
v 4.1.12 and above
NVRmini 2
v 1.7.1 and above
NVRsolo
v 1.1.1 and above
Titan NVR
v 1.6.2 and above
New Camera Supported:
3S
N5012
Arecont
AV2255AM and AV5255AM
BOSCH
NBC-225-P, NDC-225-PI, NBC-255-P, NDC-255-P, NTC-255-PI, NBC-265-P,
NDC-265-P, NDN-265-PIO, NBC-274-P, NBC-274-PT and NBC-274-PM
Dlink
DCS-6004L, DCS-6005L
DlinkCN
DCS-H70-21D/M
Eneo
PXB-2080Z03 and PXD-2080Z03
Grundig
GCI-H2505B, GCI-K0589T(H), GCI-K0779P, GCI-K1523VS, GCI-K1526VS,
GCI-K1585V, GCI-K1586V and GCI-K2505B
Milesight
MS-C2351, MS-C2361, MS-C2362, MS-C2372, MS-C2451, MS-C2471,
MS-C2651, MS-C2661, MS-C2662, MS-C2671, MS-C2672, MS-C2681,
MS-C2682, MS-C2951, MS-C3351, MS-C3356, MS-C3361, MS-C3362,
MS-C3366, MS-C3372, MS-C3376, MS-C3651, MS-C3656, MS-C3658,
MS-C3661, MS-C3662, MS-C3666, MS-C3671, MS-C3672, MS-C3673,
MS-C3676, MS-C3678, MS-C3681 and MS-C3682
Panasonic
BL-VP101, BL-VP104 and BL-VT164
Samsung
SNO-6084 and SNV-6084
Sunell
Generic model
Vivotek
AF5127, AF5127V, SF8172, SF8172V, FE8172V (the above models are fisheye
camera . SF8172 and SF8172V support PPTZ), AB5353H
33 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com33
NVR Device Pack Release Note
NUUO version 3.2.1
FW upgrade:
Arecont
AV1255 (FW 65218), AV3255 (FW 65218), AV5115DN (FW 65218),
AV8185DN (FW 65183) and AV8365DN (FW 65183)
CNB
IDC 4000T(FW T1-1.0.13.0424) and INS 2000 (FW
XNET.A1-2.01.13.0204)
Dlink
DCS-2103 (FW 1.20), DCS-2130 (FW 1.20), DCS-2210 (FW 1.20) and
DCS-2230 (FW 1.20)
Everfocus
EVS-410 (Firmware upgrade to v1.0.21)
Samsung
SND-3082, SND-3082/F and SNB-3002
(snb3002_Series_2.10_130416), SNV-5080R (FW
snv5080r_3.10_130416), SNO-5080R (FW
snb5000_Series_3.10_130416) and SND-5080F, SNB-5000A and
SNV-5080 (FW snb5000_Series_3.10_130416) and SNB-7002,
SNV-7082, SND7082/F and SNO-7082R (FW
snb7002_series_1.06_130402), SNB-6003, SNB-6004, and SND-6083
(FW snb6004_Series_1.00_130412)
Sunell
IPS54-70DN-ZR18, SN-IPC54-40EDN and SN-IPD54-12VDN
Enhancement:
1. Samsung: For SNP-5200 and SNP-6200 change the default speed to 3 or 4.
Notice:
1. Feature added:
a. Dual Stream default format change to H.264 for Axis MPQ series camera, Vivotek Generic
model and new supported camera above (except support by design camera).
2.
Known issue:
e. For Samsung SNB-7002, SNV-7082, SND7082/F and SNO-7082R, it will have no image
issue via RTSP when Frame rate sets to 1.
f.
For Samsung SND-3082, SND-3082/F and SNB-3002, it cannot setup video parameter:
brightness.
g. For Samsung SNB-7002, SNV-7082, SND7082/F and SNO-7082R, the resolution will be
800*448 & 320*176 when sets to 800*450 & 320*180.
h. For Samsung all cameras: Video GOP appear as 1 ~15, but the value actually will be 1 ~149
in web.
i.
For Everfocus EVS410
34 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com34
NVR Device Pack Release Note
NUUO version 3.2.1
j.
1.
It can setup MJPEG high resolution only up to 10 fps.
2.
Not support RS-485 PTZ.
For Sunell Generic
1.
Focus, Talk function are not test with NUUO product.
2.
The maximum resolution is depending on camera.
3.
It cannot set some framerate and bitrate due to Onvif limitation.
4.
Camera firmwave must be v1.6_build044014_148 or above then can use generic
model.
k. For Grundig GCI-K1586V, GCI-K0779P, GCI-K2505B
1.
It will have audio noise issue when camera resolution is 1920x1080 or Q factor is 70.
2.
It will fail when Get camera parameter resolution is 1920x1080 or Q factor is 70.
3.
GCI-K2505B framerate setting will fail when select TV system Autoir option WDR 25fps,
autoir25fps and WDR 30fps.
l.
For CNB INS2000
1.
Not support Digital input(DI). (camera firmware issue)
2.
Dual stream format could be MJPEG, MPEG4 or H.264. It will be same as main stream
format
For CNB IDC4000T
1.
It will show incorrect bitrate "1M" when sets Video MPEG with CBR in 4000 bitrate on
camera web.
2.
It will trigger DO simultaneously when trigger DI.
3.
Dual stream default format is MPEG4.
m. For D-Link DCS-2103
1.
It will not support Talk function on camera web and MainConsole. (camera firmware
issue)
n. For Milesight MS-C2351, MS-C2361, MS-C2362, MS-C2372, MS-C2451, MS-C2471,
MS-C2651, MS-C2661, MS-C2662, MS-C2671, MS-C2672, MS-C2681, MS-C2682,
MS-C2951, MS-C3351, MS-C3356, MS-C3361, MS-C3362, MS-C3366, MS-C3372,
MS-C3376, MS-C3651, MS-C3656, MS-C3658, MS-C3661, MS-C3662, MS-C3666,
MS-C3671, MS-C3672, MS-C3673, MS-C3676, MS-C3678, MS-C3681 and MS-C3682 FW
issue:
1.
It cannot use RateControl.
2.
It cannot trigger Motion and DI in the same time.
35 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com35
NVR Device Pack Release Note
NUUO version 3.2.1
3.
It will have no response when send cgi commend.
4.
It will not support UPnP.
5.
There is one level of difference between video parameter and camera web on
Mainconsole.
o. For Milesight MS-C3651
1.
It will not support Digital input(DI). (camera firmware issue)
p. For Milesight MS-C3658
1.
It will show wrong frame rate value on Mainconsole when change resolution from
2560x1920 to other resolution.
q. For 3SVision N5012
1.
It will always show HTTP port 80 when use UPnP search.
r. For Arecont models
1.
AV5155, AV5255, AV2255 need to be connected in close-network. It will operate
abnormally in open-network.
2.
AV5255, AV2255 not support audio function due to camera firmware issue.
3.
AV5255, AV2255 will have broken image when use H264 (TCP/UDP) with high bitrate
setting (>16384).
4.
AV8185DN and AV8365DN

Four channels need to use the same protocol and format.

The image will flash when the main stream is MJPEG and use dual stream.
s. For Vivotek SF8172 and SF8172V
1.
Due to camera CPU decode performance issue, the first 1080p stream can reach up to
30 fps, but the second 1080p stream cannot.
Bug fixed:
Mainconsole:
5. Onvif: Fix the issue that enable auto reboot, sometimes it does not start the recording
schedule.
NVRmini 2:
1. Vivotek: Fix FE8172V auto detect issue.
36 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com36
NVR Device Pack Release Note
NUUO version 3.2.1
Titan NVR:
4. Fix the issue that Generic RTSP model will disconnect in NuClient live view but it is still
recording.
5. Fix the issue when reboot Titan NVR, the IP cameras will disconnect and do not record.
37 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com37
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.15.0 (2013/07/29)
Modules:
Device Pack
v 2.15.0
Supported Systems:
Mainconsole
v 4.1.12 and above
NVRmini 2
v 1.7.0 and above
NVRsolo
v 1.1.0 and above
Titan NVR
v 1.6.1 and above
New Camera Supported:
Dlink
DCS-3511, DCS-3530, DCS-5010L, DCS-5020L, DCS-5211L, DCS-5222L, and
DCS-6314
DlinkCN
DCS-H70-21D/M
Eneo
PXB-1080Z03, PXB-2080Z03IR and PXB-3080Z20
Forenix
C2002, C2002-W, D2000-FD3, D2000-VD3, D2000-VP2, FBU-200LWD,
FBU-300LWD, FDM-300LWD, FVD-200LWD, FVD-200LWD, FVD-300LWD,
T2000-FB1, T2000-FB2, T2000-VB3, VQ2100, VQ2200, VQ2210C, VQ2300 and
VQ2310
LG
LND7300, LNP2810T, LNU5100R, LNV5100R and LNV7300
Sony
SNC-ER585
Vitek
VT-20VN-M, VTC-IR401, VTC-IR402, VTD-134FNIB, VTD-134FNIBP,
VTD-134FNIWP, VTD-13FN, VTD-13V210NIB, VTD-13V210NIBP,
VTD-13V210NIW, VTD-13V210NIWP, VTD-20V210NIB, VTD-20V210NIBP,
VTD-20V210NIW, VTD-MV13V210NBP, VTD-MV13V210NP,
VTD-MV13VR210NBP, VTD-MV13VR210NP, VTD-MV20V210NBP,
VTD-MV20V210NP, VTD-MV20VR210NBP, VTD-MV20VR210NP, VT-PTZ220
and VT-PTZ220NP
Vivotek
FD8133V, FD8166 and FE8173 (fisheye camera)
Zavio
D7510
3M
ANPR
38 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com38
NVR Device Pack Release Note
NUUO version 3.2.1
FW upgrade:
ACTi
ACD2000Q (FW v3.04.06-AC), KCM-3911 and KCM-7911 (FW 5.10.02)
Arecont
AV2115DN (FW 65218) and AV3116DN (FW 65219)
Dynacolor
Nv223 (add motorize zoom function detect) (FW z120130417NSA)
Everfocus
EHN3260 (v1.2.2)
Fine
CDV-2M360(VB1.0.32_F, fisheye camera),
CDV-5VM501(HD_VC1.0.18_F) and TCP-HDVB800(VC1.0.18)
Grandstream
GXV-3501 (add preset function on Mainconsole)
Vivotek
VS8401 (add dual stream) (0201b)
Zavio
P5111 and P5116 (M2.1.6.02)
Notice:
3.
Feature added:
b. Add preset function on Grandstream GXV3501/GXV3504.
4.
Known issue:
t.
Fine
1.
CDV-5VM501
i.
It will have Image broken issue with MJPEG in 2592x1944 and 2048x2048 via
RTSP
ii.
Unstable stream with H.264 via RTSP
u. Sony SNC-ER585
It will have image broken issue with MPEG4 texture during resolution switch. (Titan NVR)
v. ACTi ACD2000Q
1.
Not support framerate 8 due to camera firmware issue.
w. Eneo PXD-2080Z03IR
1.
Only support RTSP port 554 due to camera firmware issue.
2.
Only integrate NTSC mode due to camera firmware issue.
3.
It will have discontinuous issue on audio when fps under 1.
4.
Camera framerate may not enough under high resolution, framerate and quality
settings.
5.
Not support brightness, contrast and saturation due to camera firmware issue.(IP+)
x. Vitek
1.
VTC-IR401, VTC-IR402
i.
Only support RTSP port 554 due to camera firmware issue.
ii.
Only integrate NTSC mode due to camera firmware issue.
39 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com39
NVR Device Pack Release Note
NUUO version 3.2.1
iii.
It will have discontinuous issue on audio when fps under 1.
iv.
Camera framerate may not enough under high resolution, framerate and quality
settings.
v.
Not support UPnP due to camera firmware issue.
vi.
Not support brightness, contrast and saturation due to camera firmware
issue.(IP+)
2.
VTD-13FN, VT-20VN-M, VTD-134FNIB, VTD-134FNIBP, VTD-134FNIWP, VTD-13FN,
VTD-13V210NIB,
VTD-13V210NIBP,
VTD-20V210NIB,
VTD-20V210NIBP,
VTD-13V210NIW,
VTD-20V210NIW,
VTD-13V210NIWP,
VTD-MV13V210NBP,
VTD-MV13V210NP, VTD-MV13VR210NBP, VTD-MV13VR210NP, VTD-MV20V210NBP,
VTD-MV20V210NP, VTD-MV20VR210NBP and VTD-MV20VR210NP
i.
Only support RTSP port 554 due to camera firmware issue.
ii.
Only integrate NTSC mode due to camera firmware issue.
iii.
Camera framerate may not enough under high resolution, framerate and quality
settings.
iv.
Not support UPnP due to camera firmware issue.
v.
Not support brightness, contrast, saturation due to camera firmware issue.(IP+)
3.
VT-PTZ220NP and VT-PTZ220
i.
Only support RTSP port 554 due to camera firmware issue.
ii.
Only integrate NTSC mode due to camera firmware issue.
iii.
Camera framerate may not enough under high resolution, framerate and quality
settings.
iv.
It will have discontinuous issue on audio when fps under 1.
v.
Not support UPnP due to camera firmware issue
vi.
Preset, preset name and PTZ speed cannot synchronize to camera web due to
camera firmware issue.
vii.
Not support brightness, contrast and saturation due to camera firmware
issue.(IP+)
y. 3M
ANPR only integrate MJPEG 1st stream video.
1.
z. Zavio
1.
D7510
i.
It will only support framerate 1~15.
ii.
It will cause delayed image and broken voice when connect stream via RTSP over
HTTP in high video quality.
2.
P5116 and P5111
40 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com40
NVR Device Pack Release Note
NUUO version 3.2.1
i.
It will only support pan and tilt when use PTZ.
ii.
It will not support audio when use AMR 7.95 format.
iii.
The max framerate of MPEG4 and MJPEG is up to 20 FPS in 1280x800.
Bug fixed:
Mainconsole:
1. Fix UDP NVC 1000 will disconnect randomly and show “connecting” all the time.
2. Fix when click PTZ focus panel cause terminate abnormal issue.
3. Fix terminate abnormal issue when use Onvif null-pointer.
NVRmini 2:
2. Fix terminate abnormal when use Onvif null-pointer.
3. Fix no video display by setting MJPEG and MPEG4 format with Vivotek FD8135H.
NVRsolo:
1. Fix cannot connect to Eneo PXD-1020F02 issue.
2. Fix when connect Santec SNC-3302, SNC-5312, SNC-5315, SNC-6202, SNC-6212IR
and SNC-6312IRH will cause solo crash issue.
3. Fix terminate abnormal when use Onvif null-pointer.
4. Fix no video display by setting MJPEG and MPEG4 format with Vivotek FD8135H.
Titan NVR:
6. It will cause system terminate abnormal when connect with Bosch NTC 265PI/NDN-265PIO.
7. Fix cannot connect Honeywell HDEZ20HDEX (firmware H20120808NSA) issue.
8. Fix terminate abnormal when use Onvif null-pointer.
9. Fix no video display by setting MJPEG and MPEG4 format with Vivotek FD8135H.
Release Version v2.14.0 (2013/06/26)
41 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com41
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 2.14.0
Supported Systems:
Mainconsole
v 4.1.0 and above
NVRmini 2
v 1.5.0 and above
NVRsolo
v 1.0.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
ACTi
D61, E25, E66 and KCM8211
Arecont
AV12186
Brickcom
20xp and 300N series
DigitalWatchdog
DWC-MPA20M
Dlink
DCS-6115, DCS-6315, Super Model
Everfocus
EMN 2320 and ETN 2110
Fine
C3000/C3000-W, CDV-3VM800, CDB-5VM551, CDB-MV1080F
TCP-HP1080 and TCP-VM359
Samsung
SNB-6003, SNB-6004, SND-6083 and SND-6084
Vivotek
FD8363, FD8163 and Generic
Zavio
B7320 and F3210
FW upgrade:
ACTi
D11, D12, D21, D22, D31, D32, D41, D42, D51, D52, D54, D55, D62,
D64, D65, D71, D72, D81, D82, E11, E12, E13, E21, E22, E23, E24,
E26, E31, E32, E33, E34, E41, E42, E43, E44, E45, E46, E51, E52, E53,
E54, E55, E56, E61, E62, E63, E64, E65, E67, E71, E72 ,E73, E74, E81,
E82, E83, E84, E85, E86, E87, E91 ,E92 (FW 6.03.17) and
KCM8111(FW 5.10.02)
Vivotek
FD8161 (FW 0105b)
Notice:
42 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com42
NVR Device Pack Release Note
NUUO version 3.2.1
5.
Known issue:
c. ACTi
甲、 For D and E series camera
Fix the Fragment IP assembly timer handler panic to reboot.
乙、 E13 and the certificate
It will disconnect with NUUO product abnormally.
丙、 E84 and the certificate
If select resolution 640x360, it will have incorrect value on parameter setting.
d. Samsung SND-6083
The talk from the speaker is weak.
e. Fine
甲、 CDB-5VM551
Not support MJPEG with resolution 2592x1944.
乙、 CDV-3VM800
It will cause image broken, and drop frame when use MJPEG with highest fps,
resolution and quality through TCP connection.
It will cause CPU heavy loading when use MJPEG with highest fps, resolution and
quality through RTSP.
丙、 TCP-HP1080
Received only half of fps with web setting
f.
Digital watchdog
甲、 Not support dual stream when select single stream for ONVIF setting at webpage.
乙、 There is a valid resolution 320x0 in profile1 at MJPEG.
丙、 The quality value does not synchronize with webpage quality value.
丁、 It is invalid with frame rate 0.
戊、 There are two port settings on camera web, web port and service port. When NUUO
product and camera are located in the same network, you can use this web port as
configuring port on NUUO product. If NUUO product and camera are located in different
network, you must choose service port. "Go to web" function on NUUO product setting
page might direct to the wrong url.
g. D-Link
甲、 Super Model (Tested by DCS-2332L)
It is incorrect with Resolution List and Bitrate List information.
Quality mode switch does not support (CBR/Fix quality)
43 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com43
NVR Device Pack Release Note
NUUO version 3.2.1
h. Arecont
甲、 AV12186
DI cannot work.
i.
EverFocus
甲、 For EMN2320, no support MPEG4.
乙、 For EMN2320, cannot switch CBR/VBR and only support VBR.
丙、 For EMN2320, no support 720x480, 704x480 and 640x480 resolution.
丁、 For ETN2110, motion detection is not compatible with MPEG4 codec because of camera
firmware issue.
j.
Zavio
甲、 For F3210, Video resolution cannot change when only setup resolution.
乙、 For F3210, the AMR mode of talk function cannot work.
Bug fixed:
Mainconsole:
4. Sometimes click liveview will cause Maincosole crash when using Onvif model.
5. It will fail when Arecont AV-8365DN change format from MJPEG to H264.
NVRmini 2:
1. Samsung 3082:
(1) The resolution is not listed correctly under camera parameters.
(2) The selected frame rate is not being achieved.
(3) Latency in live view
44 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com44
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.13.0 (2013/05/27)
Modules:
Device Pack
v 2.13.0
Supported Systems:
Mainconsole
v 4.1.0 and above
NVRmini 2
v 1.5.0 and above
NVRsolo
v 1.0.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
ACTi
D22, D62, E13, E22, E23, E24, E26, E33, E34, E43, E44, E45, E46, E54, E63,
E64, E65, E67, E73, E74, E83, E84, E85, E86 and E87
Arecont
AV3146 and AV3256
Centrix
Generic
CNB
ISMC1063P
DigitalWatchdog
MD421TIR
Dlink
DCS-942L
Dynacolor
Generic
Everfocus
EDN 1220, EDN 1320, EMN 2220, EPN 4220
Fine
ACM-B3000 and ACM-R3006, CDV-5VM501 and TCP-VM559
Guardeon
GDN-D3200IR, GDN-D3200V, GDN-F1300V, GDN-H1300IR and GDN- H3200IR
Network Camera
C3000 and C3000-W
JVC
VN-T16, VN-T216, VN-H657U and VN-H657WPU
Techson
TC-IP213WS
UDP
IPN100HD, IPN1202HD, IPN2102HD, IPN302HD, IPN3102HD, IPN3202HD,
IPN3502HD, IPN3502HD, IPN3502HDIR, IPN6602HD, IPN6802HD,
IPX3302HD, IPX3702HD, IPX4202HD and IPX4602HD
Vivotek
IP8152
Zavio
D7320
FW upgrade:
Eneo
GXC-1710M (upgrade to FW 2.11)
45 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com45
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
6.
Known issue:
k. ACTi For D and E series camera:
甲、 NUUO recommend customers use CLOSE network environment as ACTi may shut down
and restart automatically in some complex network environment.
乙、 ACTi will continue to figure out the reason and help to solve this issue.
丙、 The audio stream of E13 unstable sometimes, even though in VLC and web.
l.
Centrix Generic model:
甲、 The bitrate of dual stream cannot come to 500kbps when main stream setting is MJPEG
and CIF.
乙、 Parameter setting will fail when enable multi-stream and resolution higher than 1080p.
丙、 Camera firmware must be cx20130506NSA or above then can use generic model.
m. DynaColor Generic model:
甲、 Parameter setting will fail when enable multi-stream and resolution higher than 1080p.
乙、 Camera firmware must be z120130417NSA or above then can use generic model.
n. Fine CDV-5VM501 not support UPnP search by camera firmware issue.
o. NetworkCamera C3000 and C3000-W not support UPnP search by camera firmware issue.
p. TC-IP213WS:
甲、 Can not trigger motion alarm under H.264 1fps.
乙、 Can not search camera by UPnP when change http port except 80.
丙、 H.264 fps may not enough under TCP connection in high quality and frame rate settings.
q. Digital Watchdog MD421TIR
甲、 Not support Zoom, Focus, Talk and VideoParamSetting(MainConsole only)
乙、 Not support dual stream when select single stream for ONVIF setting at webpage.
丙、 Setting frame rate to 0 did not work.
丁、 MJPEG with resolution 320x240 is invalid.
戊、 Quality value is not synchronized with webpage.
己、 There are two port settings on camera web, web port and service port. When NUUO
product and camera are located in the same network, you can use this web port as
46 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com46
NVR Device Pack Release Note
NUUO version 3.2.1
configuring port on NUUO product. If NUUO product and camera are located in different
network, you must choose service port. Or "go to web" function on NUUO product setting
page might direct to the wrong URL.
r. CNB ISMC1063P
甲、 Not support audio codec G.726 when using TCP connection.
s. Arecont AV3146DN-3310-D and AV3256PM
甲、 The streaming has low FPS under high quality.
t.
JVC VN-H657U
甲、 Firmware Issue: MJPEG video stream is unstable over high resolutions such as 1920X1080,
1280x720.
u. JVC VN-T16U
甲、 Firmware Issue: MJPEG video stream is unstable over high resolutions such as 1920X1080,
1280x720.
乙、 Firmware Issue: The Encoder parameters may not sync camera web.
v. JVC VN-H57
甲、 Firmware Issue: MJPEG video stream is unstable over high resolutions.
w. JVC VN-H137
甲、 Firmware Issue: H264 video stream is unstable over low frame rate.
x. Zavio D7320
甲、 Talk function cannot work due to firmware issue.
乙、 When change the HTTP port from 80 into 8080, camera send IP address which including
parentheses, such as [192.168.1.66].
丙、 When setting highest video setting with H.264, the fps could not reach up to 20.
y. UDP
甲、 When used UPnP search, if changes the HTTP port from default 80 into 8080 and reboot the
camera, it does not carry any port information with reply message.
乙、 IPN3502HD
i.
When setting highest video setting in main stream, the second stream will unstable
and cannot work both in H.264 and MJPEG.
47 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com47
NVR Device Pack Release Note
NUUO version 3.2.1
丙、 IPX4202HD
i.
cgi load failure: #402
ii.
Audio with choppy in higher video setting
iii.
Motion detection cannot disable once it trigger
iv.
Unstable stream with highest video setting, sometimes does not work.
z. EverFocus EDN1220, EDN1320, EMN2220 and EPN4220
甲、 Not support MPEG4.
乙、 Can not switch CBR/VBR and only support VBR.
丙、 EDN1320 no support 720x480, 704x480 and 640x480 resolution.
aa. Vivotek IP8152
甲、 CGI returns a wrong PTZ capability.
Bug fixed:
Mainconsole:
6. Hikvision 8254: support third stream, preset function can not synchronize with
Mainconsole.
7. Hikvision DS-6716HWI: Can not connect the camera except channel 1(Generic).
8. Grandstream GXV3501: Remove “Clean All” Button from Add Preset Point.
NVRmini 2:
2. Hikvision 8254: Preset function can not synchronize with NVRmini2.
3. Hikvision DS-6716HWI: Can not connect the camera except channel 1(Generic).
Titan NVR:
1. Hikvision 8254: Preset function can’t synchronize with Titan NVR.
2. Hikvision DS-6716HWI: Can not connect the camera except channel 1(Generic).
NVRSolo:
1. Yodor YUC-H626: Can not auto detect this model.
Release Version v2.12.0 (2013/04/29)
48 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com48
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 2.12.0
Supported Systems:
Mainconsole
v 4.1.0 and above
NVRmini 2
v 1.5.0 and above
NVRsolo
v 1.0.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
ACTi
D11, D12, D21, D31, D32, D41, D42, D51, D52, D54, D55, D64, D65,
D71, D72, D81, D82, E11, E12, E21, E31, E32, E41, E42, E51, E52, E53,
E55, E56, E61, E62, E71, E72, E81, E82, E91 and E92
Axis
M3007 (fisheye camera)
CNB
IBP5030CR, IDC4050F, IDC4050IR, IDC4050VF, IDC4050VR, IDP4030VR,
IDP5035VR, IGC2050F, IGP1030, IGP2035F, ISS4032Z28W, IVC5055VR,
IVP4030VR, IVP5035VR, IXC2050IR, IXP3035VR, NGE2055F, NXE3055VR,
NXE3055MR, NDE5055MF, NVE5055VR, NVE5055MF and NDE5055VR
Dahua
IPC-HDBW3101, IPC-HDB3101 and IPC-HFW3101C
Dlink
DCS-2332L, DCS-3715, DCS-3716, DCS-6010L (fisheye camera), DCS-6616,
DCS-6817B1, DCS-6915 and DCS-7513
Etrovision
EV8180A, EV8580A, EV8581A, EV8780A, EV8781A and EV8782A
Fine
ACM-V3002
Hikvision
DS-2CD2012-I, DS-2CD2112-(I), DS-2CD2212-I5 and DS-2CD2312-I
i-Mege
B3210E, G2212E, G2213E, G2214H, G3211E, N3211E and V2211E
Network Camera
3MP_BOX, 3MP_FD, 3MP_IR and 3MP_VD
On Electronics
CFB-10MP (IP+ only), CFB-13MP, CFB-20MP, CFB-30MP, CFV-20MP/LIR35
(IP+ only) ,CFV-13MP/LIR35, MDV-10MP (IP+ only), MDV-20MP,
MDV-20MP-AV (IP+ only), MDV-30MP, MDV-30MP-AV (IP+ only),
MDV-13MP/LIR20 (NAS only)
Planet
ICA-H652-PA-220
Saerim
SR-IDC4050IR, SR-IDC4050VR, SR-IDC4050F, SR-IGC2050F, SR-IVC5055VR,
SR-IDC4050VF, SR-IXC2050IR, SR-IGP2035F, SR-IDP4030VR,
SR-IXP3035VR, SR-ISS4032Z28W, SR-IVP4030VR, SR-NGE2055F,
SR-NXE3055VR, SR-NXE3055MR, SR-NDE5055VR, SR-NDE5055MF,
SR-NVE5055VR, SR-NVE5055MF
Sunell
SN-IPV54/31UDN, SN-IPC54/31EDN, SN-IPR54/31AKDN, SN-IPR54/31APDN
49 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com49
NVR Device Pack Release Note
NUUO version 3.2.1
SN-IPD54/31VDN, SN-IPD54/31VDR, SN-IPV54/31ZDR, SN-IPV54/31UDR,
SN-IPC54/14EDN, SN-IPR54/14AKDN, SN-IPR54/14APDN, SN-IPD54/14VDN,
SN-IPD54/14VDR, SN-IPV54/14ZDR and SN-IPV54/14UDR
Vivotek
PD8136
Zavio
D5210 and D7210
FW upgrade:
BOSCH
NTC-265-PI and NDN-265-PIO (upgrade to FW 5.70.0311)
Levelone
WCS-6020 (upgrade to FW 1.1.4.1) and WCS-6050 (upgrade to FW
1.0.4.2)
Santec
SNC-3302, SNC-3305, SNC-5312IR, SNC-5315IR, SNC-6202,
SNC-6212IR, SNC-6302, SNC-6312IRH and SNC-6315IRH (upgrade
to FW 1.0.2.332)
Samsung
SND-5010, SNB-5001, SND-5011, SND-5061, SNB-7001, SNB-7002,
SND-7011, SND-7061, SND-7082 and SNV-7082 add bitrate option on
H.264 3072/5120/6144/7168/9216/11264/12288/13312/14336
Notice:
7.
Known issue:
bb. ACTi For D and E series camera:
甲、 NUUO recommend customers use CLOSE network environment as ACTi may shut down
and restart automatically in some complex network environment.
乙、 ACTi will continue to figure out the reason and help to solve this issue..
cc. iMege G2212E : If http port does not 80, UPnP search will fail.
dd. LevelOne WCS-6020, WCS-6050
甲、 When select high resolution, camera’s frame rate will less than 30fps.
乙、 PTZ Home will stop when disable the home button at titan.
丙、 Image broken at high resolution.
丁、 Not support AAC codec.
ee. D-Link
甲、 DCS-3715
i.
Sometimes video setting can’t get the correct parameters2. Camera web setting is
very unstable and got slowly respond, especially in higher video parameter
50 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com50
NVR Device Pack Release Note
NUUO version 3.2.1
ii.
When 1920x1080, 25 fps, and 8M bitrate, will get incorrect parameter or long respond
time
iii.
cgi respond slowly.
乙、 DCS-6817B1
i.
PTZ Autopan does not work
ii.
When enable mic only, the camera does not send any audio package.
丙、 DCS-6915
i.
Not support talk
丁、 DCS-2332L
i.
In H.264 format, setting 1 fps and under 512kbps with max resolution cause unstable
connection.
ff. Dahua
甲、 IPC-HDBW3101, IPC-HDB3101 and IPC-HFW3101C
i.
FW issue, bit rate range is different between camera web and response to cgi.
gg. Hikvision
甲、 DS-2CD2012-I
i.
DS-2CD2012-I FW issue: not support PTZ function but web setting can enable this
option.
hh. Planet
甲、 ICA-H652-PA-220
i.
Camera response slow.
ii.
IO triggle time will delay about 3 secs.
iii.
Audio has some noise in web site.
ii. Santec
甲、 SNC-6302, SNC-3305, SNC-63115IRH
i.
M-JPEG on high resolution and quality may not get parameter.
ii.
Audio has some noise in high resolution.
jj. Sunell SN-IPV54/31UDN:
甲、 FW issue: Camera will reboot when MJPEG 2048x1536, 1920x1080 and quality 9.
kk. Bosch NDN-265-PIO:
甲、 It can't set resolution below 1280x720 when stream2 property set to "Copy Stream 1".
乙、 When H.264 quality is set to “0”, the camera will Auto-adjust the quality setting. For
minimum quality, the value should be “100”.
丙、 Audio AAC can't work due to NUUO platform issues.
ll. Etrovision EV8180A, EV8580A, EV8581A, EV8780A, EV8781A and EV8782A
甲、 Not support Talk.
乙、 With four profiles mode only support resolution 640x480. (camera limitation)
51 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com51
NVR Device Pack Release Note
NUUO version 3.2.1
丙、 Not support MPEG4 in NVRmini 2/NVRsolo/TitanNVR.
丁、 Motion Detection only works on H.264.
戊、 It needs to reboot after changing HTTP port.
mm.
Fine ACM-B3000, ACM-V3001, ACM-V3002, ACM-R3002
甲、 MJPEG only support when MPEG4/H264’s resolution is lower than 1280x720 in
Mainconsole.
nn. CNB
甲、 IGC2050F, IDC4050F, IDC4050IR, IDC4050VF, IDC4050VR, IVC5055VR and IXC2050IR
i.
FW issue: cannot set bitrate 128kbps when the resolution is D1 or VGA.
ii.
When selects MJPEG, 1fps, the actually received fps is 6.
乙、 IGP1030, IBP5030CR, IVP4030VR and IDP4030VR
i.
In the MJPEG format, the fps is not enough when resolution is XGA or SXGA.
丙、 IGP2035F, IDP5035VR, ISS4032Z28W, IVP5035VR, IXP3035VR
i.
Cannot set bitrate 128kbps when the resolution is D1 or VGA. It is firmware issue.
丁、 NGE2055F, NDE5055MF, NDE5055VR, NVE5055MF, NVE5055VR NXE3055MR, and
NXE3055VR
i.
Not support UDP connection.
ii.
Video connection cannot establish when the setting of bitrate is 9M or 10M.
oo. Saerim
甲、 SR-IGC2050F,
SR-IDC4050F,
SR-IDC4050IR,
SR-IDC4050VF,
SR-IDC4050VR,
SR-IVC5055VR and SR-IXC2050IR
i.
Cannot set bitrate 128kbps when the resolution is D1 or VGA. It is firmware issue.
ii.
When it selects MJPEG, 1fps, the actually received fps is 6.
乙、 SR-IGP2035F, SR-IDP4030VR, SR-ISS4032Z28W, SR-IVP4030VR, and SR-IXP3035VR
i.
Cannot set bitrate 128kbps when the resolution is D1 or VGA. It is firmware issue.
丙、 SR-NGE2055F,
SR-NDE5055MF,
SR-NDE5055VR,
SR-NVE5055MF,
SR-NVE5055VR,
SR-NXE3055MR, and SR-NXE3055VR
i.
Not support UDP connection.
ii.
Video connection cannot establish when the setting of bitrate is 9M or 10M.
pp. Zavio D5210 and D7210
甲、 The audio function of AMR7.95 cannot work.
乙、 The talk function with AMR codec cannot work.
丙、 The max frame rate of MPEG4 is up to 20 FPS in 1280x800. It is the limitation of hardware.
Bug fixed:
Mainconsole:
52 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com52
NVR Device Pack Release Note
NUUO version 3.2.1
9. Forenix_ACDV-3VM501: can’t not choose h264 video format, cause by auto detect incorrect
vendor and model name in DP 2.7 and behind, solve by add model name in corresponding
function.
10. Samsung SPE-100: Incorrect maximum fps support.
NVRmini 2:
4. VisionHitech Mi series can’t connect.
Titan NVR:
3. Hikvision_DS-6101HFI-IP: LiveView do not have image.
4. Hikvision_DS-2CD752MF-FB: LiveView do not have image when change stream profile
from original to low or min.
5. VisionHitech Mi series can’t connect.
Release Version v2.11.0 (2013/03/26)
Modules:
Device Pack
v 2.11.0
53 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com53
NVR Device Pack Release Note
NUUO version 3.2.1
Supported Systems:
Mainconsole
v 4.1.0 and above
NVRmini 2
v 1.5.0 and above
NVRsolo
v 1.0.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
ACTi
KCM8111
ADT
ADT-VSDVS-4C, ADT-VSDVZ5MP-VF3090IRI and ADT-VSDVZ5MP-VF3090IRO
American Dynamics
ADCi600-D131
BOSCH
NDC-225, NWC-455, NWC-495, NWD-455, NWD-495 and VIP-X1XF-E
CNB
IDC4050VR, IDP5035VR, IVC5055VR, IVP5035VR, IXC2050IR, IXP3035VR,
NDE5055VR, NVE5055VR and NXE3055VR
Dlink
DCS-2136L, DCS-3010, DCS-5010L
Dlink CN
DCS-N70M-21H3, DCS-V70M-21H2, DCS-V70M-11H, DCS-N40M-22H3,
DCS-V40M-12H, DCS-V40M-32H2, DCS-N31M-21H3, DCS-V30M-51H2,
DCS-N62-40H2, DCS-N40M-81H3
Etrovision
EV8180Q-XD and EV8782Q-BD
Fine
ACM-R2001, CDB-MV720F, CDV-P360 (Fisheye camera, support on
Mainconsole only), TCP-HFB720
Hikvision
Generic model support second stream
LevelOne
FCS-1132, FCS-3052, FCS-5052 and FCS-5062
Saerim
SR-IDC4050F, SR-IDC4050VR, SR-IDP4030VR, SR-IGC2050F, SR-IGP2035F,
SR-NDE5055VR, SR-NGE2055F, SR-NVE5055VR ,SR-IXP3035VR and
SR-NXE3055VR
Sunell
SN-IPC54/40EDN, SN-IPD54/40VDN, SN-IPR54/40AKDN, SN-IPR54/40APDN,
SN-IPV54/40UDN and SN-IPV54/40UDR
Techson
TCIP-Typ213MDN22x
Zavio
F3102, F3107, F3115
FW upgrade:
Sony
SNC-CH210 (FW v1.78) , SNC-CH260 (FW v1.78), SNC-DH120 (FW
v1.78) and SNC-ER550 (FW v1.78)
54 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com54
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
8.
Known issue:
qq. American Dynamics ADCi600-D131
甲、 Not support UPnP search.
乙、 Not support motion detection at MJPEG mode.
rr. Fine CDB-MV720F
甲、 Frame rate cannot reach 30fps.
ss. Fine ACM-R2001
甲、 Frame rate may not enough about 2~8 fps because of camera design.
tt. Sunell SN-IPC54/40EDN
甲、 MJPEG 2592x1920 will image broken due to camera FW issue.
乙、 Camera will reboot when MJPEG 2048x1536 and quality 9 due to camera FW issue.
uu. Sunell VSR54/01
甲、 MJPEG 2592x1920 will image broken due to camera FW issue.
乙、 DI can't work correctly due to camera FW issue.
vv. Etrovision EV8180Q-XD, EV8782Q-BD
甲、 Not support Talk.
乙、 Under four profile mode only support resolution 640x480. (camera limitation)
丙、 Not support MPEG4 in NVRmini 2/NVRsolo/TitanNVR.
丁、 Motion Detection only works on H.264.
戊、 It needs to reboot after changing HTTP port.
ww.
LevelOne FCS-1132, FCS-3052, FCS-5052, FCS-5062
甲、 The Motion Detection of MPEG4 is error.
乙、 In Night mode, the Saturation cannot set. It is FW issue. (FCS-5062)
xx. Sony SNC-CH210, SNC-CH260, SNC-DH120, SNC-ER550
甲、 Dual stream cannot enable when H.264, 30fps, 1280x720(SNC-CH210, SNC-DH120,
SNC-ER550) or H.264, 30fps, 1920x1080(SNC-CH260) is selected for Image1.
乙、 The number of connection is 1 for JPEG and 2 for H264 and MPEG4 at the same time.
丙、 The PTZ function only support zoom in/out, focus near/far and auto focus function.
(SNC-CH260, SNC-DH120)
丁、 The connection cannot established with high probability when selected JPEG, high
resolution and high quality. (SNC-DH120, SNC-ER550)
yy. Zavio F3102, F3107, F3115
甲、 Under AMR 7.95 mode cannot use talk and audio function.
乙、 The max frame rate of MPEG4 is up to 20 FPS in 1280x800. It's camera limitation.
zz. D-Link
55 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com55
NVR Device Pack Release Note
NUUO version 3.2.1
甲、 DCS-2136L:
i.
Constant bit rate cannot set bigger than 4M
ii.
In camera web video setting and NUUO camera setting page, when mode is MJPEG,
set the fixed quality to "Excellent" and save, then change the Mode to H.264, the
“Fixed quality” should also be "Excellent", but the "Good" option is show up due to
camera FW issue.
iii.
When select resolution "176x144", it will display incorrect image
乙、 DCS-3010:
i.
Firmware Issue: Not support Talk
ii.
Firmware Issue: Bitrate setting
(more than 2Mkbps will cause broken-image and image delay)
aaa.
D-Link China:
甲、 DCS-N62-40H2
i.
Firmware Issue: Not support Motion Detection
ii.
Firmware Issue: Bitrate List on web shows 3Mkbps
(the truly Bitrate value of camera could be 3Mkbps or 2.5Mkbps)
iii.
Speed setting only support pan speed(synchronized with Tilt speed)
乙、 DCS-N40M-81H3
i.
bbb.
Not support TCP/UDP
Hikvision Generic model:
甲、 The camera setting will be failed, when sub stream resolution bigger than main stream
resolution in Rapter platform.
ccc.
ADT-VSDVS-4C
甲、 Talk can't be use after setup audio codec.
乙、 Tilt up and down can’t be use.
丙、 Name of preset point only support a-z A-Z @-_!
ddd.
ADT-VSDVZ5MP-VF3090IRI and ADT-VSDVZ5MP-VF3090IRO
甲、 Audio codec is wrong under AMR.
乙、 Camera may not connect under highest resolution, highest bit rate and lower frame rate.
丙、 Tilt up and down cannot use.
eee.
TCIP-Typ213MDN22x
甲、 Not support auto detection.
乙、 Not support DI/DO and audio.
丙、 Not support setup PTZ speed.
丁、 Video stream will have low frame rate with high quality under MJPEG.
戊、 Not support UPnP search.(Mainconsole)
己、 The frame rate does not synchronize with web under MJPEG.
56 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com56
NVR Device Pack Release Note
NUUO version 3.2.1
fff. BOSCH NWD-495, NWC-495, NWD-455, NWC-455
甲、 Auto detect model unsupported
乙、 H.264 supports up to a maximum of 2CIF as this utilizes the Baseline Profile.
丙、 When H.264 quality is set to '0', the camera will auto-adjust the quality setting. For
minimum quality, the value should be '100'.
丁、 When MJPEG quality is set to '0', the camera will auto-adjust the quality setting. For
minimum quality, the value should be '1'.
戊、 MJPEG frame rate depends on camera load. Value in settings dialog is not representative of
actual frame rate
ggg. BOSCH NDC-225
甲、 When H.264 quality is set to '0', the camera will auto-adjust the quality setting. For
minimum quality, the value should be '1'.
乙、 MJPEG quality depends on camera load. Value in settings dialog is not representative of
actual quality.
丙、 Audio Codec support g711, not support L1, AAC.
hhh. BOSCH VIP X1 XF E
甲、 When H.264 quality is set to '0', the camera will auto-adjust the quality setting. For
minimum quality, the value should be '1'.
乙、 MJPEG quality depends on camera load. Value in settings dialog is not representative of
actual quality.
丙、 Audio Codec support g711, not support L1, AAC.
丁、 The resolution of profile-2(Mjpeg) will be limited to CIF, if the resolutions of profile-0(h264)
and profile-1(h264) set by CIF.
戊、 H.264 video stream supports maximum resolution of 704x576 (PAL) and 704 x 480 (NTSC)
only. Full D1 (720 x 576) is not supported.
iii. Histream HH9801B-MPC-TD(HIHD_T_IR)
甲、 (MainConsole)Firmware
Issue:
Not
support
Motion
Detection,
DI,
DO,
video
setting(Brightness/Contrast/Saturation)
乙、 (Mini2/Titan/Solo) Only support main stream video, camera setting(1920x1080,
1280x960, 1280x720). The other resolution not mentioned above are not supported.
Bug fixed:
Mainconsole:
1. Zavio V111T: The zoom in/out cannot stop.
2. Sunell: DI can’t work. (except VSR54/01 fw issue can not fix)
3. Bolide: DI can’t work.
57 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com57
NVR Device Pack Release Note
NUUO version 3.2.1
4. Brickcom VS-01Ap: Cannot PTZ via joystick.
5. JVC VN-H*: Connect by http will cause CPU loading high, disable it.
NVRmini 2:
1. Grundig_GCI-K0523T, Grundig_GCI-H0503B: After selected H.264 video format in
NVRmini2, the video format will back to MJPEG.
2. Vivotek VS8801: There is no image for dual stream.
3. Sunell: DI can’t work. (except VSR54/01 fw issue can not fix)
4. Bolide: DI can’t work.
5. CNB IXC2050IR and IDC4050VR: disconnect after several hours.
6. JVC VN-H*: Connect by HTTP will cause CPU loading high (camera FW issue). NUUO
suggest not connect via HTTP.
Titan NVR:
6. Vivotek VS8801: There is no image for dual stream.
7. Sunell: DI can’t work. (except VSR54/01 FW issue cannot fix)
8. Bolide: DI can’t work.
9. CNB IXC2050IR and IDC4050VR: disconnect after several hours.
10. JVC VN-H*: Connect by HTTP will cause CPU loading high (camera FW issue). NUUO
suggest not connect via HTTP.
Release Version v2.10.0 (2013/02/26)
Modules:
Device Pack
v 2.10.0
58 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com58
NVR Device Pack Release Note
NUUO version 3.2.1
Supported Systems:
Mainconsole
v 3.5.0 and above
NVRmini 2
v 1.5.0 and above
NVRsolo
v 1.0.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
ADT
ADT-VSDVZ3MP-VF3010IRO
Beward
N100, N120, N300, N320, N600 and N630
CNB
IDP5035VR, IGC2050F, IGP2035F, IVP5035VR, IXP3035VR and NGE2055F
Dynacolor
NA083(IP+ only)
Dlink
DCS-2210, DCS-5020L
Eneo
PXD-1010F02 and PXD-1020F02
Honeywell
HDZ20HD, HDZ20HDE, HDZ20HDEX and HDZ20HDX
Vivotek
CC8130, FD8151V and IP8372
Zavio
B5010, B5111, B5210, D3100, D3200, D5112, F7210 and F3110
FW upgrade:
Levelone
FCS-4041, WCS-6020 and WCS-6050
Panasonic
WV-SC385 and WV-SP105
Sunell
SN-IPD54/12VDN
D-Link
DCS-7413, DCS-6511
Onvif support:
1. For ONVIF partner, NUUO only guarantee camera video connection (1st stream) with ONVIF test
report.
2. Onvif Product line support: Titan(Profile S v12.06), Mini2(Profile S v12.06), Mini (Onvif v1.01)
Solo (Profile S v12.06) and Mainconsole(Profile S v12.06)
Notice:
9.
Known issue:
jjj. Sunell SN-IPD54/12VDN Can't test DI due to HW broken.
kkk.
CNB IGP2035F/IXP3035VR/IDP5035VR/IVP5035VR, Failed to set bitrate to
128k over VGA/D1.
59 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com59
NVR Device Pack Release Note
NUUO version 3.2.1
lll. ADT ADT-VSDVZ3MP-VF3010IRO
1. Audio codec is wrong under AMR.
2. Camera may not connect under highest resolution, highest bitrate and lower framerate.
mmm.
D-Link
1. DCS-6511: camera framerate is lower than user setting.
2. DCS-7413: When framerate is 1, camera connection isn't stable.
Not support MPEG4, TCP, UDP
3. DCS-5020L: (Titan/Mini2) Not support Audio
4. DCS-2210: Camera web and MainConsole can’t be set simultaneously.
nnn.
DynaColor NA083 Parameter setting will fail when Mjpeg quality bigger
than 60
ooo.
Eneo PXD-1010F02,PXD-1020F02 Parameter setting will fail when Mjpeg
quality bigger than 60
ppp.
Honeywell
HDZ20HD,HDZ20HDE,HDZ20HDEX,HDZ20HDX
Parameter
setting will fail when Mjpeg quality bigger than 60
aa. OEM N73200, the AMR mode of audio doesn’t work correctly and the frame rate of MPEG4 is
up to 20 due to the limitation of hardware.
bb. Zavio
1. For F7210, due to audio and PTZ malfunction, the two functions can’t be verified unless
new camera sample is provided. Thus, audio and PTZ function for F7210 is not
guaranteed.
2. For D3100, there is no audio and the UPnP doesn’t include port settings. The two are
known as FW issue.
3. For D3200 and F3110, the AMR mode of audio doesn’t work correctly and the frame rate
of MPEG4 is up to 20 due to the limitation of hardware.
4. For B5210, the frame rate is not enough when using TCP and HTTP connection.
cc. Beward
1. For N300/320, only camera link is received for camera intergration. Thus, NUUO only
guarantee video function.
2. For N100/120, audio will be disappeared after switch settings for a few times. (FW issue)
qqq.
LeveOne
甲、 For FCS-4041, High video parameter causes slow CGI command response.
Bug fixed:
Mainconsole:
-
Fix Zavio F210A motion detection cannot be triggered.
60 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com60
NVR Device Pack Release Note
NUUO version 3.2.1
NVRmini 2:
-
None
Titan NVR:
-
Fix Titan can’t login after connecting Samsung SNB-1001 several hours.
Release Version v2.9.5 (2013/02/01)
Modules:
Device Pack
v 2.9.5
61 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com61
NVR Device Pack Release Note
NUUO version 3.2.1
Supported Systems:
Mainconsole
v 3.5.0 and above
NVRmini 2
v 1.5.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
none
Bug fixed:
Mainconsole:
-
Mainconsole would probably occur unexpected crash when first launch.
62 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com62
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.9.0 (2013/01/21)
Modules:
Device Pack
v 2.9.0
Supported Systems:
Mainconsole
v 3.5.0 and above
NVRmini 2
v 1.5.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
3Svision
S4071
Arecont
AV1145-04-W, AV1145-3310-D, AV1145-3310-W, AV1255, AV2145-04-D,
AV2145-04-W, AV2145-3310-D, AV2145-3310-W, AV3255 and AV10255
AXIS
M1013, M1144, M3006, P1204, P1354 and Q7424
Beward
N100, N120, N300, N320, N600 and N630 (Mainconsole support only)
Bullwark
BLW-510MP-BS
Dlink
DCS-5605, DCS-5635, DSC-932L, DCS-6210, DCS-7110, DCS-2230, DCS-6513
and DSC-6915
Everfocus
EDN2210 and EPN4220
Fine
3MP_BOX, 3MP_FD, 3MP_IR,3MP_PT, 3MP_VD and CDB-HD280
Forenix
C2200, C2200-W, FBX-200, FBX-300WD, FDM-200, FDM-300WD, FVD-200,
FVD-300WD, M0202-BH01, M0202-BH02, M0202-BH03, M7202-DB03,
M4202-DB03 and M4202-DB02
Hikvision
DS-2DF1-572
Levelone
WCS-6020 and WCS-6050
MegaIP
NCD-2003PR and NMX-2003P
Messoa
NCB855, NCC800 and NIC950
NTIC
HVS-D1-V3
OEM
N73110
Probe
PID-H1300
Samsung
SND-5010
Santec
SNC-3305, SNC-5315IR, SNC-6202 and SNC-6315
Sunell
IPS54/71DN/Z18 and IPS54/80DR
TP-LINK
TL-SC3130v2 and TL-SC3130Gv2
VisionHitech
Vision SM3Ti
Vivotek
IP8172
63 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com63
NVR Device Pack Release Note
NUUO version 3.2.1
Yudor
YUC-H626, YUC-H7926 and YUC-Hi26
Zavio
B5010, B5210, D3100, and F7210
FW upgrade:
Arecont
AV8185 and AV8365
Messoa
NIC950
Probe
PIC-H2010, PIN-H1310 and PMI-H2000
Onvif support:
3. For ONVIF partner, NUUO only guarantee camera video connection (1st stream) with ONVIF test
report.
4. Onvif Product line support: Titan(Profile S v12.06), Mini2(Profile S v12.06), Mini (Onvif v1.01)
and Mainconsole(Profile S v12.06)
Notice:
10. Known issue:
rrr. Yudor YUC-H626, YUC-Hi26, YUC-H7926:
In website, when bitrate mode is “CBR” and change stream mode from “Advanced mode” to
“Basic mode”. Quality will not synchronized to web.
sss.
Santec SNC-6315:
M-JPEG on high resolution and quality may not get parameter.
ttt. VisionHitech Vision SM3Ti,
1. Sometimes can't get camera parameter normally due too camera response too slow, but
there is chance to recover after reboot.
2. Audio may discontinuously under high resolution, framerate and bitrate settings.
uuu.
LevelOne WCS-6020, WCS-6050
甲、 WCS-6050 not support MJPEG 1280x1024
乙、 Not support preset
丙、 Camera’s framerate is less than 30fps at high resolution.
丁、 PTZ Home is stopped when the button is released at titan.
戊、 Broken textures at high quality.
己、 Not support AAC codec. Users have to set AMR codec via camera web.
64 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com64
NVR Device Pack Release Note
NUUO version 3.2.1
vvv.
Everfocus EDN2210 :
Sometimes can't get camera’s parameter at high resolution.
www.
Beward
1. For N300/320, only camera link is received for camera intergration. Thus, NUUO only
guarantee video function.
2. For N100/120, audio will be disappeared after switch settings for a few times. (FW issue)
xxx.
3SVision S4071
1. The quality setting of M-JPEG is unavailable.
2. When the server attaches two or more channels, the maximal framerate is unstable.
yyy.
Zavio
1. For F7210, due to audio and PTZ malfunction, the two functions can’t be verified unless
new camera sample is provided. Thus, audio and PTZ function for F7210 is not
guaranteed.
2. For D3100, there is no audio and the UPnP doesn’t include port settings. The two are
known as FW issue.
zzz.
TP-LINK TL-SC3130v2 and TL-SC3130Gv2
Not support audio with AMR 7.95.
aaaa.
Messoa NCC800, NCB855
1. Set parameter will take 10 sec or more to setup.
2. Get parameter may wrong after set parameter.
3. Broken textures on connected in 1~4sec at MPEG4.
4. Not support auto detection.
5. For NCB855, setup bit rate of MPEG4 will response wrong parameter.
bbbb.
Messoa NIC950
1. Not support UPnP.
2. Not support auto detection.
3. Not support motion detection on MJPEG.
4. Not support DI and DO.
cccc.
Probe PID-H1300
Auto detection fail. (FW issue)
65 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com65
NVR Device Pack Release Note
NUUO version 3.2.1
dddd.
D-Link
1. DCS-7110: not support Preset and HTTP protocol
2. DCS-6915: not support Preset, Audio 40kbits mode, Talk, Motion Detection and Flip.
3. DCS-2230: Quality setting fail in MJPEG
4. DCS-6210: Flip/Mirror acts contrary
5. DCS-6513: Preset issue(1st point position will be covered by 2 nd point position), Talk
voice abnormal
6. DCS-5635: Not support autopan speed setting and MPEG4 format in HTTP
7. DCS-5605: Not support MPEG4 format in HTTP
eeee.
Bullwark
BLW-510MP-BS: Get parameter will fail when Mjpeg quality bigger than 60.
ffff.Axis
P1354: Not support AAC in MJPEG. Not support AAC in H264 in Titan and Mini2 v1.6, but
support in Mini2 v1.5.
Bug fixed:
Mainconsole:
-
Hikvision Generic:
1. If device not support PTZ function, PTZ push-button will not be disable.
2. Autodetect function can’t find generic model.
3. MD delay
4. There are broken texture when use high resolution and low frame rate.
-
Messoa:
1. The default values of video parameter are different from camera web on MainConsole.
NVRmini 2:
-
Hikvision Generic:
1.If device not support PTZ function, PTZ push-button will not be disable.
2.Autodetect function can’t find generic model.
-
CNB IDC4000T:
1.the device can not connect and can not set up on camera web page after a period of
time.
66 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com66
NVR Device Pack Release Note
NUUO version 3.2.1
Titan NVR:
-
Hikvision Generic:
1.If device not support PTZ function, PTZ push-button will not be disable.
2.Autodetect function can’t find generic model.
-
CNB IDC4000T:
1.the device can not connect and can not set up on camera web page after a period of
time.
67 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com67
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.8.0 (2012/12/19)
Modules:
Device Pack
v 2.8.0
Supported Systems:
Mainconsole
v 3.5.0 and above
NVRmini 2
v 1.5.0 and above
Titan NVR
v 1.3.0 and above
New Camera Supported:
ACTi
KCM5511
Arecont
AV8185DN, AV8365DN, AV20185DN and AV20365DN
AXIS
M3005
Bolide
BN1009/PTZ3GIP, BN1009/PTZWDRIP, BN1009M/PTZ-18, BN2002IP,
BN2002WDRIP, BN2009AVAIRIP,BN2009IRIP, BN2009WDRVAIRIP, BN2035IRIP,
BN2035WDIRIP, BN5002M-A, BN5009M-A and BN5035M-A
BOSCH
NTC-265-PI and NDN-265-PIO
Corum
CS-150-IO, CS-195-IO, CS-310-IO, CS-320-IO, CS-390-IO, CS-410-IO and
CS-425-IO
Dlink
DCS-2310L, DCS-3112, DCS-6314, DCS-6915(Mainconsole support), DCS-7413
and DCS-7513
Eneo
GXB-1720M-IR, GXC-1605M, GXC-1606M-IR, GXC-1720M, GXD-1610M-IR, and
GXD-1720M-IR
Everfocus
EPN4220
Hikvision
DS-2CD8253F-EI, DS-2CD8264FWD-(EIS), DS-2CD864FWD-E, DS-2DF1-572
(Mainconsole support) and Generic
ITX
NCD-2003PR(Mainconsole support), NMX-2003P(Mainconsole support)
LevelOne
WCS-6020(Mainconsole support), WCS-6050 (Mainconsole support)
LG
LDW2010, LSW900, LSW901, LSW2010, LVS201, LVS301, LVS311, LVW700,
LVW701, LVW900, LVW901, LW352, LW355, LW9226, LW9226I, LW9228,
LW9228I
Rover
RV19BMVP and RV19BMVIR
Samsung
SNB-5001, SND-5011 and SND-5061
Sony
SNC-VB600 and SNC-VB630
Tiandy
TC-NS324S2-V2.1
Vivotek
IP8172(Mainconsole support)
68 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com68
NVR Device Pack Release Note
NUUO version 3.2.1
Yudor
YUC-H696, YUC-766R-30, YUC-H796R, YWS-H01DP and YWS-H04S
FW upgrade:
Panasonic
DG-SW155, WV-SP135E and WV-SW155
Notice:
Known issue:
I.
ACTi KCM5511
Pitch of G.711 audio is not correct.
Not support motion detection in M-JPEG.
II. CORUM
Under particular operation, the quality or resolution of video parameter can't be set. It needs
set quality on camera web again.
The particular operations sequence is as follows:
In Advanced Mode -> use VBR -> Apply -> use CBR -> Apply -> change to Basic Mode ->
Apply
CS-425-IO and CS-195-IO: Not support 2nd stream in maximum frame rate of 1080p.
CS-230-IO: Cannot setup saturation. (IP+)
CS-390-IO: Not support UPnP.
CS-150-IO, CS-195-IO, CS-320-IO, CS-390-IO, CS-410-IO and CS-425-IO: When input
under N.C status, needs trigger input more than 10 sec if you want to cancel event of input.
III. Sony SNC-VB600,SNC-VB630
Not support Motion Detection.
Not support Audio.
Alarm Input doesn’t work.
IV. VIVOTEK IP8172
Not support CBR mode (MainConsole).
MJPEG not support audio.
Not support AAC audio.
I.
LevelOne WCS-6020, WCS-6050
69 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com69
NVR Device Pack Release Note
NUUO version 3.2.1
Camera does not stable at bad network environment. For example, UPNP search failed, no
video…etc.
Not support preset
WCS-6050 not support MJPEG 1280x1024
II. Hikvision
DS-2CD8264FWD-(EIS): Not support PTZ
DS-2CD864FWD-E: Not support DI, G726 talk, zoom in/out
DS-2CD8253F-EI: Not support audio but the clickbox is opened(cgi issue).
III. D-Link
DCS-6915: Not support talk, Motion Detection, DI, DO
DCS-3112: Not support Preset
IV. Bolide
All Bolide models changing MJPEG resolution may get Fail message due to camera FW issue.
(MainConsole/Mini2/Titan)
All Bolide models AutoDetect model may fail due to incorrect model name response.
(IP+/Mini2/Titan)
BN2002WDRIP, BN5002M-A: AlarmIn message is unstable.
V.
Bosch NTC-265-PI:
MJPEG Quality always get 70 (Camera Firmware Issue). (MainConsole)
H264, MJPEG set Quality 0 but get 24 (Camera Firmware Issue). (MainConsole /Mini2/Titan)
MJPEG lag (Camera Firmware Issue). (MainConsole)
Audio Codec supports g711, not support L1, AAC. (MainConsole /Mini2/Titan)
VI. Tiandy TC-NS324S2-V2.1
Audio at titan is bad.
Only support streaming
VII. ITX NCD-2003PR:
When set Anti-Flicker Mode to 50Hz, Mainconsole would get wrong Max of FPS(30).
(Firmware issue)
VIII. LG LW9226:
Audio out sound level is too small (with high impedance).
70 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com70
NVR Device Pack Release Note
NUUO version 3.2.1
IX. LG LVS201:
Video image has some noise in the bottom line when video resolution at QCIF.
Bug fixed:
Mainconsole:
-
Samsung SND-3082 video will disconnect after continuous control PTZ several minutes.
Panasonic DG-SF334 force setting bitrate value when codec is H264.
NVRmini 2:
-
AMTK AM2221D, AM2231D preset name can't contain blanks.
Titan NVR:
-
AMTK AM2221D, AM2231D preset name can't contain blanks.
Sony SNC-EP580 PTZ speed is too slow.
71 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com71
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.7.2 (2012/11/28)
Modules:
Device Pack
v 2.7.2
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
AXIS
M3005 (For Mini2 and Titan only)
72 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com72
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.7.0 (2012/11/19)
Modules:
Device Pack
v 2.7.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
Airlive
OD-325HD
AMTK
AM2030D, AM2110D, AM2120D, AM2221D, AM2231D, AM2530D, AM2570D,
AM2590D, AM2630D and AM2730D
Asoni
CAM613M, CAM614, CAM615, CAM616M, CAM619M, CAM620, CAM624M,
CAM625M, CAM627M, CAM628M, CAM630, CAM632, CAM633, CAM634M,
CAM637M, CAM638, CAM639(Mini2/Titan only), CAM640, CAM641(Mini2/Titan
only), CAM642M, CAM647, CAM656D, SVR610, SVR611, SVR640
AXIS
P5544
Bosch
NDC-274-P and NDC-274-PT
Camtron
HLC-81AD/P, HLC-83V, HLC-83V/W,HLC-84V and HLC-84V/W
Corum
CS-270-IO
Forenix
NPB-720, NPB-720A, NPB-720U, NPD-720K and NPD-720R
Hikvision
DS-6601HFHI (Mainconsole only)
Histream
HIHD_64
Lilin
IPD2220ES, IPG1022ESX, IPG1022ES, IPR320ESX, IPR434ESX, IPR7424ESX
(Mini2/Titan support)
Messoa
NCR-875PRO,NDR-891, NIC-990
Samsung
SNB-7001, SNB-7002, SND-7011, SND-7061, SND-7082 and SNV-7082
Tiandy
TC-NH9106S2-MP
JVC
VN-H37U, VN-H57U, VN-H137U, VN-H157WPU, VN-H237U, VN-H257U,
VN-H257VPU, VN-V685U, VN-V686BU, VN-V686WPBU (Min2/Titan support,
Mainconsole have supported on DP v2.5)
Notice:
11. Known issue:
dd. BOSCH NDC-274-P
73 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com73
NVR Device Pack Release Note
NUUO version 3.2.1
-
MJPEG Quality always get 70 (Camera Firmware Issue).
-
MJPEG set Quality 0 but get 24 (Camera Firmware Issue).
-
MJPEG lag (Camera Firmware Issue).
ee. Airlive OD-325HD and AMTK AM2030D, AM2110D, AM2120D, AM2221D, AM2231D,
AM2530D, AM2570D, AM2590D, AM2630D and AM2730D Always can use http port 80 to
connect after changing http port by FW issue.
ff. Airlive OD-325HD and AMTK AM2590D, AM2030D, AM2570D, AM2530D, AM2630D,
AM2730D Initail output status will not synchronize to real output voltage by HW issue.
gg. AMTK AM2221D, AM2231D preset name can't contain blanks.
hh. Histream HIHD_64 camera response very slow, when change video parameter, there is high
opportunity to disconnect. Just wait for a while, or reboot camera, and then be able to
reconnect.
ii. Hikvision DS-6601HFHI
-
UPnP search can’t find the camera.
-
Can't change port on camera web site.
-
Talk sound is not fluent
jj. Messoa NDR891 and NCR875PRO
-
Set parameter will take 10 sec or more to setup(Camera Firmware Issue).
-
Get parameter may wrong after set parameter(Camera Firmware Issue).
-
Broken textures on connected in 1~4sec at MPEG4(Camera Firmware Issue).
-
Not support auto detection.
-
Setup bit rate of MPEG4 will response wrong parameter on Mini2/Titan(Camera Firmware
Issue).
-
Not support talk on MainConsole.
-
The default values of video parameter are different from camera web on MainConsole.
kk. Messoa NIC990
-
Can't set frame rate(Camera Firmware Issue).
-
Only support H.264.
-
Not support dual stream on 1080P(Camera Firmware Issue).
ll. Camtron HLC-81AD/P doesn’t support autodetect & search
mm.
LILIN IPD2220ES, IPG1022ESX, IPG1022ES, IPR320ESX, IPR434ESX,
IPR7424ESX Video parameter does not synchronize to ONVIF option.
nn. LILIN IPR434ESX does not support dualstream at 2048x1536
oo. Tiandy TC-NH9106S2-MP
1.
Not support ONVIF event (MD, I/O).
2.
Not support minor stream.
3.
Not support dual stream.
74 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com74
NVR Device Pack Release Note
NUUO version 3.2.1
Bug fixed:
Mainconsole:
-
Fine SP-HP2020Q-IP patrol cause IP+ dump.
Levelone FCS-3091 can’t use talk function.
NVRmini 2:
-
CNB IDP4000VD open dualstream failed.
Vivotek SD8XXX series preset issue.
Panasonic WV-SW395, WV-SW396 preset issue.
Titan NVR:
-
CNB IDP4000VD open dualstream failed.
Vivotek SD8XXX series preset issue.
Panasonic WV-SW395, WV-SW396 preset issue.
75 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com75
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.6.0 (2012/10/19)
Modules:
Device Pack
v 2.6.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
Axis
M1014 , M1143-L, M3004, M7014, P7224 and Q7406
DCS-2130 (Titan/Mini2 support and Mainconsole already support on v2.5) and
D-Link
DCS-3716
Everfocus
EDN3160, EDN3260, EDN3340, EHN3160, EHN3260, EHN3340 and EPN4122
Forenix
ACD-3VM501 and NPB-720BM
Jetstor
JS-C1100, JS-C2100, JS-WGP-100-CB, JS-B0100, JS-B0100-W, JS-B0131,
JS-BB1100-R30, JS-B1100, JB-B1204-R25, JS-D0100, JS-D1100, JS-D1130,
JS-D1204, JS-ISD0200x18 and JS-OSD0200x20
Levelone
FCS-3071-V2
Samsung
SNP-6200, SNP-6200H, SNP-6200HP, SNP-6200P
Shany
SNC-21XX ( SNC-WD2112MDN, SNC-WD2122DN, SNC-WDL2132DN,
SNC-WDL2142DN)
SNC-22XX ( SNC-2212MDN, SNC-2222DN, SNC-L2232DN)
SNC-23XX (SNC-WD2312MDN, SNC-WD2322DN, SNC-WDL2132DN,
SNC-WDL2332DN)
Sunell
IPS54/70DN/Z18, IPS54/70DN/ZR18, IPS54/70DR/Z18, IPS54/70DR/ZR18,
SN-IPC54/11FDN, SN-IPC54/11DN, SN-IPC54/11EDN, SN-IPV54/11DN,
SN-IPV54/11DR, SN-IPD54/11VDN, SN-IPD54/11VDR, SN-IPV54/11UDN,
SN-IPV54/11UDR, SN-IPR54/11DN, SN-IPR54/11ANDN, SN-IPV54/11ZDR,
SN-IPR54/11ALDN, SN-IPR54/11AKDN, SN-IPD54/12VDN, SN-IPC54/12DN,
SN-IPC54/12EDN, SN-IPC54/12FDN, SN-IPV54/12DN, SN-IPV54/12DR,
SN-IPD54/12VDR, SN-IPV54/12UDN, SN-IPV54/12UDR, SN-IPR54/12DN,
SN-IPR54/12ANDN, SN-IPV54/12ZDR, SN-IPR54/12ALDN, SN-IPR54/12AKDN
and VSR54/01
Techson
TCIP-220MDN, TCIP-230WDRMDN, TCIP-213WDRMDN, TCIP-D213WDRDN
TCIP-D220DN, TCIP-D230WDRDN, TCIP-LD213WDRMDN, TCIP-LD220MDN,
76 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com76
NVR Device Pack Release Note
NUUO version 3.2.1
TCIP-LD230WDRMDN and TCIP-LPro213WDRMDN (Mini2 and Titan support,
Mainconsole already support on DP v2.5)
Zavio
D5113, D7111, F1100 and F1105
Notice:
12. Known issue:
pp. Sunell
SN-IPD54/12VDN,
VSR54/01
autodetect
fail
due
to
camera
FW
issue.
IPS54/70DN/ZR18 VSR54/01 changing MJPEG resolution may get Fail message due to
camera FW issue. Can’t support G711 A-law(Onvif issue)
qq. Axis P7224 can’t use second audio in (All). Support G.711 only (mini2/Titan).
rr. Forenix NPB-720BM doesn’t support On-edge motion under TCP or UDP protocol.
ss. Digital WatchDog DWC-MPA20M does not support On-edge motion detection.
tt. Digital WatchDog DWC-MPA20M, if switching between profiles constantly(about 5~10
times), sometimes the camera is just disconnected and no longer connected again until
rebooting it
uu. 2.5 and 12.5 framerate can’t be show at EPN4122.
Bug fixed:
Mainconsole:
-
Can’t connect over 3 Pelco IP110 devices.
Icantek icanview240 can’t use PTZ.
Probe connection failed after several minute.
EverFocus ONVIF camera responses LAN address in NAT environment.
NVRmini 2:
-
Panasonic WV-SW395 PTZ speed moving angle too much.
-
EverFocus ONVIF camera responses LAN address in NAT environment.
Probe connection failed after several minute.
Vivotek some PTZ models can’t control PTZ when PTZ speed is 0 in the camera web interface.
Titan NVR:
-
Panasonic WV-SW395 PTZ speed moving angle too much.
-
Vivotek some PTZ models can’t control PTZ when PTZ speed is 0 in the camera web interface.
Probe connection failed after several minute.
EverFocus ONVIF camera responses LAN address in NAT environment.
77 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com77
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.5.0 (2012/09/18)
Modules:
Device Pack
v 2.5.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
ACTi
KCM5611 and KCM7911
Axis
Q1604 and Axis (for IP camera and video servers’ Video only)
Dahua
SD65XX-HN and SD69XX-HN
D-Link
DCS-2130 (Mainconsole only)
Ernitec
Mercury SX 302, Mercury SX 302IR, Mercury SX 302M, Orion SX 802IH, Orion SX
802OPH, SX 605, Vega SX 102 and Vega SX 102IH
Guardeon
GDN-V1300D, GDN-DV1300IR and GDN-D1300IR
Honeywell
HCD5MIH, HD3MDIH and HD4MDIH
JVC
VN-H257U, VN-H257VPU, VN-H37U, VN-V685U, VN-V686BU and
VN-V686WPBU(Mainconsole only)
LG
LNB3100, LNB5100, LND3100, LND5100, LNP2800, LNP2800I, LNP3700, LNP3700T,
LNV5100, LNV5110, LW130W, LW332, LW335, LW342, LW345, LW6324, LW6354,
LW6424, LW6454 and LW9422
Vivotek
FE8171V (Mainconsole only and Titan/Mini2 already support on v1.13) and FE8172V
78 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com78
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
13. Known issue:
a. ACTi KCM5611 does not support RS-485 (not support Pan/Tilt).
b. Dahua SD65XX-HN, SD69XX-HN does not support motion detection at MJPEG.
MJPEG bitrate can’t set over 8192 kbps.
c. Axis Generic support video only.
d. Axis Q1604 does not support AAC at MJPEG and not support H264 CBR mode.
e. Guardeon does not support audio in with 16KHz sampling rate.
f. LG series can’t support dual-stream when video parameter is H264, 1920x1080(or above),
over 20fps.
g. LG Speed Dome models (LW9422, LNP3700T) PTZ will stop automatically when press bottom
over 10 sec. Focus near/far needs to setup the focus mode in camera’s OSD. Adjust zoom
speed is useless.
i. Vivotek FE8172V, not support CBR mode. Not support audio at MJPEG. Not support AAC
audio.When resolution is 1360x786, video stream would have a white line at the left-bottom
of the frame. If set to Full HD mode, the low profile video stream would have a color line at
the bottom of frame.
Bug fixed:
Mainconsole:
-
Fix Santec SNC-8322 PTZ “down-left “
Fix Dynacolor NV053, NV223 autofocus
Probe PIC-H2010 with wrong MAX framerate support.
Zavio B7210, F7210 with wrong resolution support.
NVRmini 2:
-
Panasonic WV-SC385 can’t get preset point.
Sunell SN-IPS54/60DN/Z18/WI Motion Detection failed after 60sec.
Titan NVR:
-
Panasonic WV-SC385 can’t get preset point.
Sunell SN-IPS54/60DN/Z18/WI Motion Detection failed after 60sec.
79 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com79
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.4.0 (2012/08/20)
Modules:
Device Pack
v 2.4.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
ACTi
TCM1111, TCM3111, TCM4511, TCM5111 and TCM6630
Alphatech
AT-IMF5736 and AT-IMV5756
Brickcom
30xN
Grundig
GCI-K1526V and GCI-K1812W
Probe
PIC-2010T and PIN-H1310
Sunell
SN-IPS54/60DN/Z18/WI
Techson
TCIP-213WDRMDN, TCIP-220MDN, TCIP-230WDRMDN, TCIP-D213WDRDN,
TCIP-D220DN, TCIP-D230WDRDN, TCIP-LD213WDRMDN, TCIP-LD220MDN,
TCIP-LD230WDRMDN and TCIP-LPro213WDRMDN (Mainconsole only)
Videosec
ICS-20W, ID-20, IRD-20 and IRW-20W
Vivotek
BB5116, BB5315, BD5115 and FD8131
3Svision
N3071, N6072, N6073, N6074, N6075, N6076, N6077 and N9071
80 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com80
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
14. Known issue:
a. ACTi TCM6630, DI/DO useless, FW issue.
b. AlphaTech models, 2nd profile's framerate will be limited to 15fps when 1st profile set
resolution to 1600x1200. Framerate only support 3~25fps.
c. Brickcom 30xN, Cover FB-300Np, WFB-300Np, MD-300Np. MD-300Np is no support DI/DO
and one way audio only.
d. Grundig models, camera become slow response (or not response) when set resolution,
compression and framerate near the maximum value, audio will not smooth at the same
time. Suggest modify GOV length to small value when video framerate lower than 5.
e. Probe series, will access failed when add more than 1 channel to the same camera.
f. Sunnell SN-IPS54/60DN/Z18/WI, dual-stream will connect failed when camera is too busy.
15. Bug fixed:
Mainconsole:
- Brickcom VS-04A, can’t be selected in the camera support list.
NVRmini 2:
-
ACTi CAM6610, adjust PTZ speed to adequate speed.
-
Grundig C3075, increase the PTZ control latency.
-
Sunnell camera can’t disconnect automatically when press disconnect button.
Titan NVR:
-
ACTi CAM6610, adjust PTZ speed to adequate speed.
-
Grundig C3075, increase the PTZ control latency.
-
Sunnell camera can’t disconnect automatically when press disconnect button.
81 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com81
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.3.0 (2012/07/18)
Modules:
Device Pack
v 2.3.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
Alphatech
AT-IMF5739 and AT-IMF5750
Basler
BIP2-D1920c-DN
Dynacolor
na063
Mobotix
M24M-Sec
Santec
SNC-3322 and SNC-8322I/HO
Telview
IPB612P-ICR, IPB630P-ICR, IPD612-VP-VF-IR, IPD630-VP-VF-IR, IPE600, IPW612,
IPW630, IPW630P, IPZ611, VIS611, VIS614 and VIT621
Vivotek
FD8335H, FD8372 and IP8361
82 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com82
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
16. Known issue:
a.Alphatech AT-IMF5739, AT-IMF5750
2nd profile's framerate will be limited to 15fps when 1st profile set resolution to 1600x1200.
Framerate only support 3~25fps.
b.Basler BIP2-D1920c-DN
Not support Audio & Talk
c.Dynacolor na063
Video parameter can't sync with camera web interface, need to refresh the browser.
Talk quality is not clear.
Camera efficiency will done when set high resolution & quality stream.
d.Mobotix M24-Sec
Audio only support on MxPEG.
Motion event works abnormal until first time trigger.
Resolution of dual-stream can't bigger then main-stream.
e.Vivotek FD8372
Mpeg4 support first 2 maximum resolutions are 1920x1920 & 1920x1536.
17. Bug fixed:
Mainconsole:
- Etrovision EV8180U black video when set resolution to 1920x1080.
NVRmini 2:
-
CNB IDC4050IR, IDC4050F dualstream doesn’t work.
Titan NVR:
-
CNB IDC4050IR, IDC4050F dualstream doesn’t work.
83 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com83
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.2.1 (2012/07/05)
Modules:
Device Pack
v 2.2.1
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
Notice:
1. Bug fixed:
For Eneo GCD1710M-IR, please remove DP v2.2.0 first then install DP v2.2.1 and reset
Mainconsole:
a. Eneo camera model correct to GXD-1710M-IR
b. Axis P7210 can not view the correct video channels with Codec H264.
NVRmini 2:
a. Eneo camera model correct to GXD-1710M-IR
Titan NVR:
a. Eneo camera model correct to GXD-1710M-IR
84 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com84
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.2.0 (2012/06/19)
Modules:
Device Pack
v 2.2.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
ACTi
KCM-3311 and KCM-7311
Arecont
AV2116 and AV3116
Axis
M7014, P3354, Q1604, Q7414 (NVRmini 2, Titan NVR only)
P3364
Brickcom
OB-100Ap, VS01A, PZ-040D and PZ040E
Eneo
GXB-1710M-IR, GXC-1710M and GCD-1710M-IR
Hikvision
DS-2CD7153-E
Mobotix
D-14D Sec
Samsung
SNB-1001, SND-1011, SND-1080, SNO-1080R, SNV-1080 and SNV-1080R
Vivotek
FD8372, FD8136, IP8133, PT8133, SD8362
85 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com85
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
1. Known issue:
a. Hikvision DS-2CD7513-E
this camera can not set framerate 15~22 when resolution is 1600x1200,1600x912.
sometimes camera can't set resolution 1600*1200、1600*912、1280*960.
2.
Bug fixed:
Mainconsole:
b. ACTi KCM-5211 PTZ function will be useless after 1 week. (Need upgrade FW V5.05.07 & ISP
V1.02.02)
c. Samsung SND-3080 can not get the parameter of the video stream.
NVRmini 2:
None
Titan NVR:
a.
Axis Q7406 can not support PTZ control.
b.
Axis P7210 can not view the correct video channels with Codec H264.
c.
UDP IPE3500M disconnect automatically after 24hours.
d.
Vivotek SD83x2, SD83x3 can not adjust the PTZ speed.
e.
Zavio B7201 video broken in LiveView.
86 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com86
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.1.0 (2012/05/21)
Modules:
Device Pack
v 2.1.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
Axis
P3367, P7210, P7214, P8513, P8514, Q1602, Q1602-E, Q1922 and Q1922
Brickcom
130N series and 50xA series
CNB
IDC4000T
COP
15-WS01D-E
Guardliner
SPmicro-412
Hikvision
DS-2CD853F-E
Panasonic
WV-SC386, WV-SP508, WV-SP509, WV-ST162. WV-ST165, WV-SW172,
WV-SW174W, WV-SW175, WV-SW314, WV-SW316/L, WV-SW558 and WV-SW559
Samsung
SNP-3302/H
Santec
SNC-3342 and SNC-6332
Vision Hi-Tech
I series, Mi series, M3i series and NVS102
Vivotek
FD8134-SS, IP7160-SS, IP7161-SS, IP8151-SS, IP8161-SS, IP8162P-SS,
IP8332-SS, SD8121-SS, SD8362E, SD8362-SS, SD8323E-SS
3SVision
N3072, N5071 and N8072
87 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com87
NVR Device Pack Release Note
NUUO version 3.2.1
Notice:
3.
Known issue:
a. Brickcom 130N series need waiting 15s to finish adjust the zoom/focus.
b. Brickcom 50xA series need waiting a period of time to reconnect stream success when switch
the video resolution higher than 1920x1080.
c. Hikvision DS-2CD853F-E can't set framerate 15~22 in Max resolution.
4.
Bug fixed:
Mainconsole:
Fixed Sony SNT-V704 can’t connect failed.
Fixed UDP camera image gray out or break randomly when config different resolutions.
NVRmini 2:
Fixed Axis M7001 can’t use daulstream.
Titan NVR:
None
88 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com88
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v2.0.0 (2012/04/18)
Modules:
Device Pack
v 2.0.0
Supported Systems:
Mainconsole
v 3.5.0 above
NVRmini 2
v 1.5.0 above
Titan NVR
v 1.3.0 above
New Camera Supported:
ACTi
KCM-3211, KCM-3911
Arecont
AV20185CO, AV20365CO, D4F series
Axis
M3113-R, M3113-VE, Q6032
Bullwark
BLW-230MP-BS, BLW-230MP-DS, BLW-IN220X-S, BLW-IR230MP-DSM,
BLW-IR230MP-SM and BLW-OUT220X-S
Centrix
B13H, C10, C10-W, D13HD, W13H
Dynacolor
NH720-20N1, NH820-20N1, nv103, nv223, nv053 and nv063
Forenix
B0202
GE
TVC-MP2B-S
Hikvision
DS-2CD754F-EI, DS-2CD8254F-EIS, DS-2CD752MF-E, DS-2CD754F-E
DS-2CD854F-E and DS-2CD883F-E
IQinvision
IQeye863N, IQeye865N, IQM30N, IQM31N, IQM32N and IQD32S
Levelone
FCS-0071, FCS-1122, FCS-5061 and WCS-0050(Mainconsole only)
Panasonic
WV-SC384, WV-SC385, WV-SF332, WV-SF335E, WV-SW355(above add I/O),
WV-SW396
Rover
RV1WAD, RV01AD, RV01AT, RV04AD, RV1WAG, RV79AD, RV7RAD, RV7RAG,
RV81AD, RV81AG, RV84AD, RV84AM, RV84AV and RV87ZA
Samsung
SNB-3002, SNO-7080RP, SNP-3371, SNP-3371TH, SPE-400
SND-3082 (F) and SNV-3082
Vivotek
FD8135H, FD8335H, IP8335H, PT8133 and PT8133W
Zavio
B7210, D7110, F1100(Mainconsole only), F1105(Mainconsole only), F3101, F3106,
F3201, F3206 and F531E
Notice:
89 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com89
NVR Device Pack Release Note
NUUO version 3.2.1
5. From DP v2.0, Mainconsole/NVRmini 2 (from v1.5)/Titan NVR (from v1.3) share same
device pack.
6.
Known issue:
a.
ACTi : KCM3211's PTZ only support Zoom and Focus.
b. Arecont: AV20185 include AV20185DN, AV20185CO, AV20365 include AV20365DN,
AV20365CO
c.
Bullwark: BLW-IR230MP-SM 1920x1080 MJPEG Bit rate too high will affect camera
parameter can not sync to camera information
d. Forenix: not support search and auto detected (camera FW issue)
e. Hikvision: 1.DS-2CD8254F-EIS、DS-2CD854F-E、DS-2CD883F-E can't set framerate 15~22
in Max resolution, DS-2CD8254F-EIS、DS-2CD854F-E、DS-2CD883F-E image
broken when resolution over 1600x1200
f. IQinvision: IQM3xN series not support audio in M-JPEG
g. Panasonic: WV-SC385 and WV-396 support continuous PTZ
h. Samsung: SNP-3301, SNP-3370: H264 can't support QCIF resolution
7.
Bug fixed:
Mainconsole:
a. Fix Vivotek IP7361 motion detection works failed when set motion area more than 2.
b. Santec: SNC-4302
1080P and 800x600 don’t support flip and rotate, Model I/O revise and Quality setting fail
issue
NVRmini 2:
a. Fix AV8185DN can't get correct video framerate, quality & compression after setting video
parameter when adding the same model with a server over two times.
Titan NVR:
a. Fix Panasonic WV-SC385. The speed of PTZ is very slow in the Titan NVR.
90 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com90
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.19.0 (2012/02/29)
Modules:
Device Pack
v 1.19.0
Supported Systems:
MainConsole
v 3.3.0 above
New Camera Supported:
Dynacolor:
V2 series
iCANTEK:
iCanView322MP, iCanView340MP
Messoa:
NIC990PRO-HP
Micronet:
SP5523W, SP5563HTM, SP5581HDC, SP5582HTM, SP-5584HTM, SP5591HTM
SP5923,
Pelco:
IP110, SpectraIV-IP
Santec:
SNC-3302, SNC-4302, SNC-5312IR, SNC-6302, SNC-6312IRH, SVS-3001
Truen:
TCAM-5x10, TCS-2000
Notice:
c.
d.
Firmware Upgrade

iCANTEK: iCanView332MP, iCanView362MP

Truen: TCAM-570
Known issue:
i. Messoa: NIC990PRO-HP
Only support video and PTZ. Other parameters setting, audio and DI/DO are not available
due to firmware issue.
j. Pelco : IP110, SpectraIV-IP
Only support MPEG4 image, not support parameter setting. SpectraIV-IP only support
704x240. IP110 only support 704x480.
k. Micronet: SP5923
1080P and 800x600 don’t support flip and rotate.
l. Micronet: SP5581HDC
Not support talk.
m. Santec: SNC-4302
1080P and 800x600 don’t support flip and rotate.
n.
Truen: TCAM-570
91 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com91
NVR Device Pack Release Note
NUUO version 3.2.1
MJPEG not support audio.
o.
Truen: TCAM-2000

Not support below resolutions:
Composite NTSC 352x240, 720x240
HDMI 1080i60 352x240, 720x240, 640x360

e.
Echo would occur after stop talk function
Bug fixed:
a. ACTi: KCM-5211 Auto-Focus behavior did not sync with camera web.
b. Vivotek: VS8401 would connect with incorrect channels.
c. CNB: ISS2965x can’t Zoom In/Out by joystick.
d. Corumcctv: MainConsole would hang and stop after disconnecting the video stream.
92 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com92
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.18.0 (2012/01/03)
Modules:
Device Pack
v 1.18.0
Supported Systems:
MainConsole
v 3.3.0 above
New Camera Supported:
Hikvision:
DS-2CD783F-E, DS-2CD783F-EI, DS-2DF1-5702, DS-2DF1-570A,
DS-2DF1-5732, DS-2DF1-573A, DS-2DF1-57A
Lilin:
IPD2220ES, IPG1022ES, IPR320ESX, IPR722S, IPR7424/8ESX
Sony:
SNC-EP521, SNC-EP550, SNC-EP580, SNC-ER550
Vision Hi-Tech:
VISION i series, VISION M3i series, VISION NVS102
Vivotek:
IP8335H
Notice:
f.
Bug fixed
p.
PELCO: D5118 cannot operate PTZ feature by joystick.
q.
PELCO’s cameras: The video format does not sync with web’s setting.
r.
Fine: TCP-690 cannot be connected.
s.
AXIS: P5534-E cannot set PTZ preset positions.
t.
iCANTEK: iCanView362MP, iCanView332MP :
The audio stream would cause IP+ crash.
g.
Known issue:

Lilin: IPG1022ES, IPD2022ES and IPR7424/8ESX
The audio inputs only support HTTP protocol.

Hikvision: DS-2DF1-57xx series
The H.264 stream displays not smoothly.
93 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com93
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.17.0 (2011/12/01)
Modules:
Device Pack
v 1.17.0
Supported Systems:
MainConsole
v 3.3.0 above
New Camera Supported:
ACTi:
KCM-5211E, KCM-5311E
AMTK:
AM2110D, AM2231D, AM2590D
Etrovision:
EV8281U, EV8285Q, EV8286Q
Hikvision:
DS-2CD753F-E, DS-2CD753F-EI, DS-2CD754F-E, DS-2CD754F-EI,
DS-2CD754FWD-E, DS-2CD754FWD-EI, DS-2DF1-572
Panasonic:
WV-SF132, WV-SF135, WV-SW152/M, WV-SW155/M
UDP:
IPE1100M, IPE3100, IPE3500, IPE4100, IPE5500, IPE6500, IPE7500
Vision Hi-Tech:
Vision Mi series
Vivotek:
MD7560X
Zavio:
F3201, F7210
Notice:
h.
Bug fixed
u.
Mainconsole breakdown when closing and restarting Mainconsole after Onvif models operate
Start patrol.
v.
SAE-E588HDE18C can’t control Zoom In/Out by joystick.
w.
PELCO-D5118 doesn’t store the relative parameter of ptz speed after change it and restart
Mainconsole.
i.
Known issue:

Hikvision DS-2CD753-E, DS-2CD753-EI, DS-2CD754-E, DS-2CD754-EI,
DS-2CD754FWD-E, DS-2CD754FWD-EI do not support PTZ preset using RS-485.
j.
Firmware Upgrade:

Arecont: AV3135

Samsung: SNB-5000, SND-5080/F, SNP-5200H, SNV-5010, SNZ-5200

UDP: NVC1000
94 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com94
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.16.0 (2011/11/04)
Modules:
Device Pack
v 1.16.0
Supported Systems:
MainConsole
v 3.3.0 above
New Camera Supported:
Brickcom:
MD-100AP
CNB:
IDC4050F, IDC4050IR, IDC4050VF, IDC4050VR, IGC2050F, ISMC1063x,
IS1765x, ISS2965x, ISSM2063x, IVC5055VF, IVC5055VR, IXC2050IR,
Dahua:
HDB3300N, HDB3300P, HDBW3300N, HDBW3300P, HF3110N, HF3110P,
HF3211P, HF3300N, HF3300N-W, HF3300P, HF3300P-W
Etrovision:
EV3150A, EV3151, EV3151A, EV6150A-BI, EV6150A-CI, EV6151A, EV6153A,
EV6156A, EV6250A-EI/EO, EV6251A-FI/FO, EV6252A-GI/GO, EV6252A-GI/GO,
EV6353A-DO, EV6353A-EO, EV6353A-FO, EV6355A/AP-BO, EV6355A/AP-CO,
EV6551A/AP-BI, EV6551A/AP-CI, EV6551A/AP-DI, EV6552A/AP, EV6552R/RP,
EV6580A/AP-B/C, EV6581A/AP, EV6750, EV8150A, EV8180A, EV8180A-D,
EV8180F, EV8180Q, EV8180Q-D, EV8180U, EV8180U-D, EV8280U, EV8285U,
EV8383F, EV8580A-B, EV8580A-C, EV8580A-DB, EV8580A-DC, EV8580F,
EV8580Q-C, EV8580Q-DB, EV8580Q-DC, EV8580U-B, EV8580U-C, EV8580U-DB,
EV8580U-DC, EV8580U-DM, EV8580U-M, EV8581A-C, EV8581A-DB, EV8581A-DC,
EV8581Q-C, EV8581Q-DB, EV8581Q-DC, EV8581U-B, EV8581U-C, EV8581U-DB,
EV8581U-DC, EV8582A-D, EV8780A, EV8780U, EV8781A-C, EV8781A-DC,
EV8781F, EV8781Q-C, EV8781Q-DC, EV8781U-C, EV8781U-DC, EV8781U-DM,
EV8781U-M, EV8782A, EV8782A-DB, EV8782Q, EV8782Q-DB, EV8782U,
EV8782U-DB
Shany:
SNC-10XX, SNC-20XX, SNC-81XX, SNC-91XX, SNC-D1XX
USAG:
US-AVC4-2-600NR-I2
Vivotek:
IP8133W, IP8331, MD8562
Samsung:
SNV-7080, SNV-7080R
Notice:
1. Bug fixed:

AXIS P1346: Support all of AAC audio codec setting.
95 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com95
NVR Device Pack Release Note
NUUO version 3.2.1

Arecont AV2125: Fix the image would turn to green when using UDP connection

Shany: Fix 1080P resolution name.

Zavio D611E: Fix connection issue
2. Known issue:

CNB: 2M pixel models do not support UDP connection.

Dahua: All models only support Pan & Tilt feature using RS-485 to control the external
device.

Etrovision: xx8x/xx5x series do not support talk function, 8150A and related models do not
support VGA resolution.

USAG: Does not support PTZ feature using RS-485.

Samsung: 3120x, 3430H, 5xxx and 7xxx series only support TCP connection.
3. Firmware Upgrade:

Samsung: SND-7080, SNO-5080R, SNP-3120, SNP-3120V, SNP-3430H, SNV-3120,
SNV-5080R
96 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com96
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.15.0 (2011/10/03)
Modules:
Device Pack
v 1.15.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4 & 3.4.1 & 3.5.0 & 3.5.10 &
v 3.5.18
New Camera Supported:
Arecont:
AV20185DN, AV20365DN
Probe:
PIC-500, PIC-501, PIC-H1310T, PIC-H2010T, PID-500, PID-501, PID-H1000,
PID-H2010T, PIK-H2010T, PIN-H1310T, PIN-H2010T, PIP-H1000, PIS-400,
PK-H1310T, PMI-400, PMI-403, PMI-410, PMI-H2000, PTI-400, PTI-401, PTI-402,
PTI-403, PTI-500, PTI-501, PTI-502, PTI-503, PTI-H1302, PTI-H2100
Shany:
SNC-21X0, SNC-21XX, SNC-22XX, SNC-23XX, SNC-HD2XX, SNC-HD81X2,
SNC-HD91X2, SNC-HD91XX, SNC-RX01N
Vivotek:
SD83x1E, SD83x2E, SD83x3E, VS8401
Zavio:
F3106, F7110
Notice:
4. New feature:

Onvif 1.02 PTZ feature is supported.
5. Bug fixed:

LevelOne FCS-5041: login in with wrong password will cause system crash.
6. Known issue:
7. Probe series don’t support IO feature/audio in.
8. Shany series will show B/W image when set camera parameter very low quality in MJPEG codec.
Release Version v1.14.0 (2011/09/02)
97 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com97
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.14.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4 & 3.4.1 & 3.5.0
New Camera Supported:
ACTi:
KCM5211, KCM5311, KCM7211
Arecont:
AV1115, AV1125, AV2115, AV2125, AV3115, AV3125, AV5115, AV5125,
AV10115
AXIS:
M3114-VE, Q6035, Q6035-E
CORUM:
CS-190-IO, CS-190-IP, CS-190-IW, CS-265-IO, CS-265-IP, CS-265-IW,
CS-285-IP, CS-325-IO, CS-325-IP, CS-385-IO, CS-385-IP, CS-390-IO,
CS-390-IP, CS-410-IP, CS-410-IW, CS-415-IP, CS-415-IW
Forenix:
ACDV-3VM501, AEP-Q2018H-IP, AEP-Q2018HW-IP, AEP-Q2026H-IP,
AEP-Q2026HW-IP, AEP-Q2036H-IP, AEP-Q2036HW-IP, ASP-PTIR737-IP,
ASP-PTIR737-LA-IP, ATCP-IRH5030C, ATCP-IRH5040C, ATCP-MH802,
ATCP-MH802DN, ATCP-MH802DN/WI, ATCP-MH802WI, ATCP-VM501,
B0100, B1100, C1100, C1100-W, D0100, D1100, D2100
Messoa:
NIC910HPRO, NIC930HPRO, NIC950HPRO
SONY:
SNC-EP520, SNC-ER520, SNC-ER521, SNC-ER580
UDP:
IPE3500M, NVC4000, NVC4000-R12, NVC4000-R40
Vivotek:
IP8352, PZ81x1, PZ81x1W
Notice:
9. New feature:

Onvif 1.02 support is officially released on Device Pack 1.14.0 but non-support PTZ feature.

ACTi
TCD2500 supports PTZ feature.

Grandstream
GXV series supports talk and PTZ features
10. Bug fixed:

PANASONIC WV-NM100 has probabilities cause system crash.

ACTi ACM1431 Audio disabled issue.
Release Version v1.13.0 (2011/08/02)
98 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com98
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.13.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4 & 3.4.1 & 3.5.0
New Camera Supported:
ACTi:
KCM7111
AXIS:
M5013, M5014, P5512, P5512-E, P5522, P5522-E
Brickcom:
VS-04A
Everfocus:
EQN2200, EQN2201
Grandstream:
GXV-3501, GXV-3504, GXV-3601, GXV-3601HD, GXV-3601LL, GXV-3611HD,
GXV-3611LL, GXV-3615, GXV-3651, GXV-3662HD
Panasonic:
WV-SW352, WV-SW355
Pelco:
D-5118
Samsung:
SNP-3301, SNB-7000
Vivotek:
FE8171V
Notice:
11. New feature:

AXIS
P1346, P5534 support AAC codec

Vivotek
VS8102 supports continuous PTZ
12. Bug fixed:

Truen
Adjust TCAM-570 PTZ moving distance sync with web client.

SAE
DR-E588-HD18 can’t control PTZ by joystick.

AXIS
Supported Q7401 to 64 preset point.

Fine
MainConsole will hang out when single TCP-VM501 setup four connections at the same time.
Release Version v1.12.0 (2011/07/01)
99 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com99
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.12.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4 & 3.4.1 & 3.5.0
New Camera Supported:
Everfocus:
EAN3200, EHN3200, EDN3240, EZN3240
Samsung:
SNB-1000, SND-7080, SNO-5080R, SNP-3120V, SNP-3370, SNP-3430H,
SNP-5200, SNP-5200H, SNV-5010, SNV-5080R, SNZ-5200
VIVOTEK:
FD8162, FD8361L, FD8362, FD8362E, SD8362E
Notice:
13. Bug fixed:

Fix Sony preset name length issue.

Fix Panasonic WV-SP105 auto detect failure.
Release Version v1.11.0 (2011/05/31)
100 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
100
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.11.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4 & 3.4.1 & 3.5.0
New Camera Supported:
ACTi:
KCM5111, TCM4001
AXIS:
P3346, P3346-V, P3346-VE
CTCunion:
DVS-8501E, DVS-8504E
Panasonic:
DG-SF334, WV-SF342, WV-SF346
Samsung:
SNB-5000, SND-5080/F, SNV-3120, SNV-5080
Santec:
SNC-3903M, SNC-5321MIR, SNC-6163ID, SNC-6223MIR, SNC-6303M,
SNC-P3603M
Sony:
SNC-DH110/B, SNC-DH110/W, SNC-DH110T/B, SNC-DH110T/W
Videosec:
ICS-13, ICS-20F, ID-20
VIVOTEK:
IP8362, MD7530, VS8801
UDP:
NVC1000
Notice:
1. Bug fixed:

Fix Dallmeier preset function dump

ONVIF check startcode if using RTSP for H264 codec

Fix Vivotek IP 7133 can’t use AAC codec issue
101 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
101
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.10.0 (2011/04/15)
Modules:
Device Pack
v 1.10.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4 & 3.4.1
New Camera Supported:
Arecont:
AV1325, AV2825, AV8185DN, AV8365DN
AXIS:
P1347, P1347-E, P5532, P5532-E, P5534-E, Q1921, Q1921-E
D-link:
DCS-6511, DCS-7410
Fine:
EDH-02H, SP-PTIR737-LA-IP, TCP-IR590-WD30, TCP-IR590-WD50,
TCP-IRH5030C, TCP-IRH5040C
IQinvision:
IQ732N
Panasonic:
WV-SC384, WV-SC385, WV-SW395
Sony:
SNC-DH210/B, SNC-DH210/W, SNC-DH220, SNC-DH220T
vForge:
VFA1
VIVOTEK:
FD8133V, FD8134V, IP8151P, IP8162, IP8162P, MD7560
Notice:
1. Bug fixed:

ACTi CAM7301: auto detection failure issue.

Arecont Camera: auto detection failure issue.

Axis Q7401 sync preset point issue.

Dynacolor NH061: broken image issue (H.264/1280x720).
2. Bosch speed dome V4G series supported by Axis video server (test by model Q7404).
102 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
102
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.9.0 (2011/02/28)
Modules:
Device Pack
v 1.9.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4 & 3.4.1
New Camera Supported:
Arecont:
AV1315, AV2815
AXIS:
212 PTZ-V, 215 PTZ-E, 240Q Blade, 241Q Blade, 241S Blade, 243Q Blade, P1343-E,
P1344-E, P1346-E, Q1755-E, Q6034-E
Lilin:
IPS025, IPS030, IPS035, IPS125, IPS130, IPS135, IPS203, IPS212
Panasonic:
WV-SP102, WV-SP105
Sony:
SNC-CH260, SNC-CH280, SNC-DH210T/B, SNC-DH210T/W, SNC-DH260,
SNC-DH280
Notice:
1. Dallmeier DDZ40SM-HD: Add TCP connection, DI/DO and two-way audio.
2. Bug fixed: Panasonic WV-NS202A auto detection failure.
103 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
103
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.8.0 (2010/12/31)
Modules:
Device Pack
v 1.8.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4
New Camera Supported:
ACTi:
TCM7811,
Hikvision:
DS-2CD7133-E, DS-2CD7153-E
Levelone:
FCS-0040, FCS-3081, FCS-5051, FCS-5041, WCS-0040
Lilin:
IPD112ESX, IPD552EX, IPR414ESX, IPR418ESX, IPR454, IPR458
Sony:
SNC-CH110/B, SNC-CH110/S, SNC-CH220
Notice:
1. Bug fixed: Users can adjust Arecont camera’s resolution by setting four video coordinate
values. (Not support Arecont 8000 series cameras.)
104 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
104
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.7.0 (2010/11/12)
Modules:
Device Pack
v 1.7.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12 & v 3.4
New Camera Supported:
ACTi:
ACM5811, ACM7511, TCD2100, TCM3001, TCM3011, TCM3401, TCM3411,
TCM4201, TCM5001, TCM7011
ARM:
MP13DDNWD, MP13VPDN
Camtron:
IPH3611N, NVE1000A, NVE2000A, NVE4000A
CryptoTelecom: S-152
Dallmeier:
DDZ40SM-HD
Panasonic:
BL-C210, BL-C230, WJ-GXE500, WV-SF332, WV-SF335, WV-SF336, WV-SP302,
WV-SP305, WV-SP306
Samsung:
SNS-100
Sony:
SNC-CH120, SNC-CH160, SNC-CH210/B, SNC-CH210/S, SNC-DH120,
SNC-DH120T, SNC-DH140T, SNC-DH160, SNC-DH240T
Truen:
TCAM-570
VIVOTEK:
FD8133, FD8134, IP8132, IP8151, IP8330, IP8332, PZ7132, SD81X1
Notice:
1. Bug fixed: Panasonic WV-NP502 won't show error message when switching video codec to
H.264.
105 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
105
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.6.0 (2010/10/7)
Modules:
Device Pack
v 1.6.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.12
New Camera Supported:
Arecont:
AV2805
Camtron:
CMNC-130, CMNC-200, CTNC-5358D, HLC-81A D/P, HLC-83V, HLC-83V/W
HLC-84V, HLC-84V/W
Honeywell:
ACUIX, HCD554IP, HD3MDIP, HD4DIP, HD4MDIP, HNVE1
PELCO:
IX10
Pixord:
P600, P606, PB630, PD634, PL621, PV6901
SAE:
ANNA 200M, E588HDE18C, E688HDE10
Notice:
1. Bug fixed: Fine WB-8211SDU can use PTZ function.
Release Version v1.5.0 (2010/8/31)
106 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
106
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.5.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v3.3.11
New Camera Supported:
Brickcom:
CB-100A, CB-100Ae, FB-100A, FB-100Ae, FD-100Ae, WCB-100Ae,
WFB-100Ae
Fine:
CDV-3VM301, CDV-3VM501, CDV-3VWD960, CDV-3VWD960H, EP-601HW,
EP-908HW, EP-936HW, EP-HTQ935, EP-Q2018H-IP, EP-Q2018HW-IP,
EP-Q2026H-IP, EP-Q2026HW-IP, EP-Q2036H-IP, EP-Q2036HW-IP,
MD-D1612, SP-PTIR737-IP, TCMA-99, TCMP-99, TCP-IPWD690,
TCP-IPWD700DN, TCP-IRV540, TCP-IRV560/50M, TCP-MH802, TCP-VM201,
TCP-VM501, WB-H811, WB-H814
Hikvision:
DS-2CD702NF-E, DS-2CD702PF-E, DS-2CD712NF-E, DS-2CD712PF-E,
DS-2CD732F-E, DS-2CD792NF-E, DS-2CD792PF-E, DS-2CD802N-IR1,
DS-2CD802N-IR3, DS-2CD802N-IR5, DS-2CD802P-IR1, DS-2CD802P-IR3,
DS-2CD802P-IR5, DS-2CD832F, DS-2CD832F-E, DS-2DF1-401H,
DS-2DF1-402H, DS-2DF1-601H, DS-2DF1-602H, DS-2DF1-603H,
DS-2DF1-604H, DS-2DF1-605H, DS-2DF1-606H, DS-2DF1-607H,
DS-2DF1-611H, DS-2DF1-612H, DS-2DF1-613H, DS-2DF1-614H,
DS-2DF1-615H, DS-2DF1-616H, DS-2DF1-617H, DS-2DM1-602H,
DS-2DM1-603H, DS-2DM1-604H, DS-2DM1-612H, DS-2DM1-613H,
DS-2DM1-614H, DS-6101HFI-SATA, DS-6104HCI, DS-6104HCI-SATA
NetworkCamera: GE-100-CB, GP-100-CB, WGE-100-CB, WGP-100-CB
PELCO:
ID10, ID30, IDE20, IDS0, IE10, IE30, IEE10, IEE20, IES0, IMS0, IX30,
IXE20, IXS0
Sony:
SNC-RS44N, SNC-RS44P, SNC-RS46N, SNC-RS84N, SNC-RS84P,
SNC-RS86N, SNC-RS86P, SNT-EP104, SNT-EX101
Videosec:
IBF-211, ID-209, IDA-210, IP-206M, IS-240
Notice:
1. Bug fixed: SANYO-HD5600P can change resolution.
2. Onvif supported: AXIS_P3301, Bosch_NWC-0455
107 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
107
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.4.0 (2010/8/9)
Modules:
Device Pack
v 1.4.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2 & v 3.3.11
New Camera Supported:
iCanTek:
iCanView362MP, iCanView332MP, iCanView350MP, iCanServer612
SANTEC:
SNC-3901MDN, SNC-P3601M
Release Version v1.3.0 (2010/7/21)
108 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
108
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.3.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2
New Camera Supported:
ACTi:
TCM-1511
Arecont:
AV10005
AXIS:
M1103, M1113, M1054, Q6034
Panasonic:
BB-HCM547A, BB-HCM701
SANTEC:
SNC-6201M, SNC-5211MIR
Sony:
SNT-EX154, SNT-EX101E, SNT-EP154, SNC-CH140, SNC-DH140, SNC-CH180,
SNC-CH240, SNC-DH240, SNC-RH164, SNC-RS46P
Notice:
1. Sony SNC-CH240, SNC-DH240 do not support resolution over 1920x1080
109 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
109
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Release Version v1.2.0 (2010/6/8)
Modules:
Device Pack
v 1.2.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2
New Features
1. Support Arecont I/O function
New Camera Supported:
ACTi:
ACM-3601, ACM-3603, ACM-3701, ACM-3703, ACM-4001
TCD-2500, TCM-4101, TCM-5312, TCM-1231, TCM-1232
TCM-5601, TCM-5611, TCM-3511, TCM-7411
Arecont:
AV3135, AV1310, AV2110, AV3110, AV5110
AXIS:
P1346, P5534, Q1910, Q1910-E, M1104, M1114
M3203, M3203-V, M3204, M3204-V, P3304, M7001
CNB:
IDC4000T, IVC4000T
IQeye:
IQ040S, IQ041S, IQ042S, IQD30S, IQD31S
IQD40S, IQD41S, IQD42S, IQ540S, IQ541S, IQ542S
Panasonic:
BB-HCM100, BB-HCM110, BB-HCM580, BL-C140A
Samsung:
SNB-2000, SNB-3000, SND-3080, SNV-3080
Sanyo:
VCC-HD2500, VCC-HD2500P
Sony:
SNT-EX104, SNC-DH180, SNC-RH124
StarDot:
SDH500BN, SDH500B, SDH300B, SDH130BN, SDH130B
SDH500VN, SDH500V, SDH300V, SDH130VN, SDH130V
Notice:
1. Bug Fixed: Fixed MainConsole unexpected crash issue with Mobotix Q24M-sec camera.
Release Version v1.1.1 (2010/5/12)
110 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
110
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.1.1
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2
New Camera Supported:
CNB:
IBE3815NVR, IBE3815PVR, IBE5810NCR, IBE5810PCR
IDP4000VD, IDP4000VR, IDP4030VR, IGP1000, IGP1030
IJB2000, INS2000, IPM3063N, IPM3063P, ISMC1063N, ISMC1063P
ISS2765NW, ISS2765PW, IVP4000VR, IVP4030VR
LevelOne:
FCS-7111
Release Version v1.1.0 (2010/5/4)
111 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
111
www.nuuo.com
NVR Device Pack Release Note
NUUO version 3.2.1
Modules:
Device Pack
v 1.1.0
Supported Systems:
MainConsole
v 3.3.0 & v 3.3.2
New Camera Supported:
ACTi:
AMU-9401, AMU-9711, TMU-9811, TMU-9911
Bosch:
NW-455
Brickcom:
WCB-100A, WFB-100A, FD-100A
CISCO:
WVC210
Dynacolor:
nNH221, nNH061, V1, V6
Everfocus:
EAN-850A, EZN-850, EDN-800, EDN-850H, EAN900, EAN800AW, EAN800A
EVS200A, EVS200AW, EPN2700, EPN3100, EPN3600
LevelOne:
FCS-3031, FCS-3051, FCS-1131, FCS-1141, FCS-3071, FCS-0030, WCS-0030
FCS-1121, FCS-3061, FCS-4020, FCS-1040 v3.0, WCS-2040 v3.0, FCS-1151
MOBOTIX:
D24M-Basic, D24M-IT, D24M-Sec
Panasonic:
BB-HCM705A, BB-HCM715A, BB-HCM735A
Samsung:
SNP-3300A
SanTec:
SNC-390DN/W, SNC-521IR/W, SNC-565IR/W, SNC-620/W, SNC-670ID/W
Sanyo:
VCC-HD3500, VDC-HD3500, VDC-HD3500p, VCC-HD2100, VCC-HD2100P
VCC-HD2300, VCC-HD2300P, VDC-HD3100, VDC-HD3100P
VCC-HD3300, VDC-HD3300, VDC-HD3300P, VCC-HD4600, VCC-HD4600P
VCC-HD5400, VCC-HD5400P, VCC-HD5600, VCC-HD5600P
StarDot:
SD-130, SD-300, SD-500, SDEXP4, SDEXP2
VIVOTEK:
IP8161, VS8102, FD8161, FD8361
Notice:
1. Only compatible with NUUO MainConsole v3.3.0 above
2. Must install Main Console software before install device pack v1.1.0
112 / 112
Copyright © 2014 NUUO Inc. All rights reserved.
112
www.nuuo.com