Austin Hughes Electronics RKP217 User manual

User Manual
2U Dual Slides LCD Keyboard Drawer
15", 17", 19" screen size
Models
RKP-217 / 219 Series
- With KVM Options
- 2U 17”, 19” screen size
Models
S-217 / 219 Series
- With KVM Options
- 2U 17", 19" screen size
- Designed for SUN Solaris
Models
RKP-2415 / 2417 / 2419 Series
- Short depth version
Contents
Chapter 1 Getting Started
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
Important Safeguards..........................................................1
Regulatory Notice................................................................2
Package Contents...............................................................3
Before Installation...............................................................4
Unpacking...........................................................................4
Optional Accessories...........................................................4
Peripheral Products.............................................................5
Structure Diagram...............................................................5
How to Install “One Man” Installation Slides....................6-7
How to Use The Slides.......................................................8
How to Use The Dual Slide.................................................9
“S” Series (Single console)
- Use CB-6 to connect to server via USB interface........................10
1.13 “S” Series (Single console)
- Use CB-6 to connect to KVM via USB interface..........................10
1.14 RKP Series (Single console)
- Use CE-6 to connect to server via PS/2 interface........................11
1.15 RKP Series (Single console)
- Use CE-6 to connect to KVM via PS/2 interface..........................11
1.16 RKP Series (Single console)
- Use CE-6 to connect to server via USB interface........................12
1.17 RKP Series (Single console)
- Use CE-6 to connect to KVM via USB interface..........................12
Chapter 2 Operation
2.1
2.2
On-screen Display Operation............................................13
On-screen Menu...............................................................14
Chapter 3 Standard Specification
3.1
3.2
3.3
Specifications..................................................................15
Keyboard & Mouse.......................................................16-17
How to Use “NS” keyboard...............................................18
Contents
Chapter 4 Optional Specification
4.1
4.2
4.3
4.4
4.5
4.6
KVM Options.....................................................................19
DVI-D Input Option............................................................19
BNC + S-Video Option.......................................................19
Audio Option.....................................................................20
DC power Options............................................................21
Touchscreen Options........................................................21
Chapter 5 Troubleshooting..........................................................22
Chapter 6 Dimensions......................................................................23
Chapter 1
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
□
□
□
□
□
□
□
□
■
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
P.1
Chapter 1
1.2 Regulatory Notice
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■
When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
■
■
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■
■
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■
Only qualified service personnel should open the chassis. Opening it yourself could damage the equip
ment and invalidate its warranty.
■
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
■
■
■
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
P.2
Chapter 1
1.3 Package Contents
1
3
6
al
User Manu
7
2
4
8
or
5
9
1 LCD keyboard drawer x 1 pc
2 CB-6 USB 2-in-1 KVM cable x 1 pc (for “S” series)
or
CE-6 Combo 4-in-1 KVM cable x 1 pc (for RKP series)
3 User manual x 1 pc
4 Power cord x 1 pc
5 Auto switch power adapter ( for external power version) x 1 pc
6 Mounting bracket x 2 pcs
7 M6*15mm screw x 8 pcs
8 M6 cage nut x 6 pcs
9 Cup washer x 8 pcs
P.3
Chapter 1
1.4 Before Installation
■
■
■
■
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable
cabinet.
Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
Position LCD keyboard drawer with respect to related facilities.
1.5 Unpacking
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they
are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.6 Optional Accessories
1. Combo 4-in-1 KVM cable
1.1 CE-6
6 feet
1.2 CE-10 10 feet
1.3 CE-15 15 feet
2. USB 2-in-1 KVM cable
2.1 CB-6
6 feet
2.2 CB-10 10 feet
2.3 CB-15 15 feet
3. Power Cord
3.1 IEC power cord
3.2 NEMA 5-15 power cord (US)
3.3 BS 1363 power cord (UK)
3.4 CEE 7/4 power cord (German)
3.5 AS 3112 power cord (Australia)
Remarks :
■ CB-6 is for “S” series only.
P.4
Chapter 1
1.7 Peripheral Products
Item
Matrix Cat6 KVM
Matrix DB-15 KVM
Combo Cat6 KVM
Combo DB-15 KVM
PS/2 DB-15 KVM
Model No.
Description
MU-1602 / MU-1603 / MU-1604
Matrix Cat6 16 port KVM
MU-IP1613 / MU-IP1614 / MU-IP1624
Matrix IP Cat6 16 port KVM
MU-3202 / MU-3203 / MU-3204
Matrix Cat6 32 port KVM
MU-IP3213 / MU-IP3214 / MU-IP3224
Matrix IP Cat6 32 port KVM
M-802 / M-803 / M-804
Matrix DB-15 8 port KVM
M-IP813 / M-IP814 / M-IP824
Matrix IP DB-15 8 port KVM
M-1602 / M-1603 / M-1604
Matrix DB-15 16 port KVM
M-IP1613 / M-IP1614 / M-IP1624
Matrix IP DB-15 16 port KVM
U-801 / U-802 / U-IP802
Combo Cat6 8 port KVM
U-1601 / U-1602 / U-IP1602
Combo Cat6 16 port KVM
U-3201 / U-3202 / U-IP3202
Combo Cat6 32 port KVM
CV-S801 / CV-802 / IP-802
Combo DB-15 8 port KVM
CV-S1601 / CV-1602 / IP-1602
Combo DB-15 16 port KVM
CV-401 / CV-801 / CV-1601
4 / 8 / 16 port PS/2 DB-15 KVM
Remarks :
■ “S” Series is for Matrix & Combo KVM only.
1.8 Structure Diagram
For RKP-2415 LCD
1
4
2
5
6
3
7
1
LCD interchangeable module kit
5
Keyboard interchangeable module kit
2
LCD membrane
6
Mouse interchangeable module kit
3
“One Man” Installation Slides
7
Carry handle to release the 2-pt lock
4
Membrane switch (KVM option)
Remarks :
■ RKP-2415 / 2417 / 2419 has no membrane switch for KVM option
P.5
1.9 How to Install "One Man" Installation Slides
Chapter 1
Install into rack
1
Rear side
Right bracket
■
Left bracket
■
■
Front side
Attach the left and right mounting bracket to rack 19”
mounting rails.
Adjust the rear mouting bracket to fit your rack.
M6 screw and cup washer x 6 pcs included.
Caution : Leaving the screws slightly loose, until
you complete the installation in step 4
Right front
Left front
2
Mounting bracket
■ Pick up the LCD keyboard drawer.
■ Insert the LCD keyboard drawer into the mounting bracket.
■ Pull and hold the left & right black arrow buttons on the rails.
■ Return the LCD keyboard drawer to park position.
Black arrow button
P.6
1.9 How to Install "One Man" Installation Slides
Chapter 1
3
■
■
Attach front left and right mounting ears of the LCD
keyboard drawer to vertical mounting rails.
M6 screw and cup washer x 2 pcs included.
4
Complete the installation
■
Tighten all 8 pcs of M6 screw to complete the installation.
Remarks :
■ NBK-01 is for RKP-217 / 219 & S-217 / 219 series only.
■ NBK-02 is for RKP-2415 / 2417 / 2419 series only.
■ Installation procedures of NBK-02 are same to that of NBK-01.
P.7
Chapter 1
1.10 How to Use the Slides
For keyboard drawer only
■
A black arrow release button is located on the
outside of each slide in the keyboard drawer.
(shown in Figure 1).
Figure 1.
■
Pull and hold the black arrow button on either
side of the LCD keyboard drawer to unlock.
(shown in Figure 2).
Figure 2.
■
Push the keyboard drawer into the rack.
(shown in Figure 3).
Caution : Keep your fingers away from the
slide stop
Figure 3.
P.8
Chapter 1
1.11 How to Use The Dual slide
■
Gently pull the handle toward the front of the
lower keyboard drawer (shown in Figure 4).
Figure 4. Pulling the handle toward the front of keyboard drawer.
■
Push the handle toward the front of the upper
LCD drawer (shown in Figure 5).
Figure 5. Pulling the handle toward the front of LCD drawer.
■
Flip up the LCD to a suitable angle shown in
Figure 6.
Figure 6. Flipping up the LCD to a suitable angle.
■
Figure 7. Operating the LCD keyboard drawer.
P.9
Operate the LCD keyboard drawer shown in Figure 7.
Chapter 1
1.12 “S” Series (Single console)
- Use CB-6 to connect to server via USB interface
Figure 8. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface
1.13 “S” Series (Single console)
- Use CB-6 to connect to KVM via USB interface
CB-6 KVM Cable
KVM
Figure 9. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface
Remarks
■ The above connection is only for the LCD keyboard without KVM switch built-in.
■ For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Caution : The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to
the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the
LCD keyboard drawer, we suggest turning off the power to all devices before connecting
them. Apply power to connected devices again only after the LCD keyboard is receiving
power. The company is not responsible for damage caused in this way.
P.10
Chapter 1
1.14 RKP Series (Single console)
- Use CE-6 to connect to server via PS/2 interface
Figure 10. Example of connecting CE-6 4-in-1 Combo KVM cable to server via PS/2 interface
1.15 RKP Series (Single console)
- Use CE-6 to connect to KVM via PS/2 interface
CE-6 KVM Cable
KVM
Figure 11 Example of connecting CE-6 4-in-1 Combo KVM cable to KVM via PS/2 interface
Remarks
RKP-2415 / 2417 / 2419 series are external power version in single console.
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
■
■
■
Caution : The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to
the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the
LCD keyboard drawer, we suggest turning off the power to all devices before connecting
them. Apply power to connected devices again only after the LCD keyboard is receiving
power. The company is not responsible for damage caused in this way.
P.11
1.16 RKP Series (Single console)
- Use CE-6 to connect to server via USB interface
Chapter 1
Figure 12. Example of connecting CE-6 4-in-1 Combo KVM cable to server via USB interface
1.17 RKP Series (Single console)
- Use CE-6 to connect to KVM via USB interface
CE-6 KVM Cable
KVM
Figure 13. Example of connecting CE-6 4-in-1 Combo KVM cable to KVM via USB interface
Remarks
RKP-2415 / 2417 / 2419 series are external power version in single console.
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
■
■
■
Caution : The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to
the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the
LCD keyboard drawer, we suggest turning off the power to all devices before connecting
them. Apply power to connected devices again only after the LCD keyboard is receiving
power. The company is not responsible for damage caused in this way.
P.12
Chapter 2
2.1 On-screen Display Operation
15" LCD membrane
17" & 19" LCD membrane
Membrane Switch
Function
Power light
Green = On
Orange = Power saving
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button
for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
P.13
Chapter 2
2.2 On-screen Menu
OSD Configuration Page
Image:
To enter into the brighness, contrast, color temp, red, green, and
blue
Geometry:
To enter into the auto adjust, H position, V position, phase and
clock
Video:
To enter into the colour, tint, sharpness, noise reduction, DCDi and
TV Setup
Audio:
To enter into volume, bass, treble, balance, AVL and mute
Misc:
To enter into the language, OSD position, graphic mode, ratio,
reset and timer
P.14
Chapter 3
3.1 Specifications
Item
Description
Form Factor
1U rack mounting on slide-out rails
LCD Manufacturer
-
Series
Diagonal Size
RKP
“S”
15" TFT
17" TFT
19" TFT
1024 x 768
1280 x 1024
1280 x 1024
250
300
Color Support
16.2 M
Contrast Ratio (typ.)
Viewing Angle (H/V)
17" TFT
19" TFT
1152 x 900 (Direct)
1152 x 900 (Direct)
1280 x 1024 (Native)
1280 x 1024 (Native)
250
300
250
16.7 M
16.7 M
16.7 M
16.7 M
700:1
1000:1
1000:1
1000:1
1000:1
150˚ x 135˚
160˚ x 160˚
150˚ x 135˚
160˚ x 160˚
160˚ x 160˚
304 x 228
338 x 270
376 x 301
338 x 270
376 x 301
Tr Response Time (ms)
2
1.3
1.3
1.3
1.3
LCD Panel MTBF (hrs)
50,000
50,000
50,000
50,000
50,000
Max. Resolution
Brightness (cd/m²)
Display Area (mm)
VGA Signal Input
Analog RGB, 0.7Vp-p
Sync. Type
Separate H/V, Composite, SOG
640 x 400, 70 Hz
720 x 400, 70 Hz
640 x 480, 60/ 70/ 72/ 75 Hz
800 x 600, 60/ 70/ 72/ 75 Hz
Resolution
1024 x 768, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 75 Hz
-
1152 x 864, 60/ 70/ 75 Hz
-
1280 x 720, 60/ 70/ 75 Hz
1280 x 720, 60/ 75 Hz
-
1280 x 1024, 60/ 70/ 72/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz
-
1152 x 900, 66 /76Hz
Plug & Play DDC
Console Port (Combo)
Power Input
Power Consumption
Compatibility
EDID 1.3
DB-15 connector for VGA / keyboard / mouse
(Combo interface)
DB-15 connector for VGA / keyboard / mouse
Support USB servers or Combo KVM switches
Auto-sensing 100 to 240VAC, 50 / 60Hz
Max. 48 Watt, Standby 5 Watt
Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval
FCC, CE
Options
KVM Integration
Keyboard & mouse
Graphic Input
DC Power
Touchscreen
Matrix & combo KVM with IP console and 2-console selection
Full size keyboard built-in touch-pad / trackball
SUN-compatible keyboard integrated with
3-button touchpad / trackball
DVI-D, BNC & S-Video input
-
DC power input with 12V, 24V, 48V selection
Resistive & capacitive
-
Environmental
Operation
0˚ to 50˚C Degree
Storage
-5˚ to 60˚C Degree
Relative Humidity
Shock
Vibration
5~90%, non-condensing
10G acceleration (11ms duration)
5~500Hz 1G RMS random vibration
P.15
Chapter 3
3.2 Keyboard & Mouse
For RKP-217 / 219 / 2415 / 2417 / 2419 series
Supporting layouts
Ne
Nb
N keyboard integrated with
touchpad
P.16
N keyboard integrated with
trackball
Chapter 3
3.2 Keyboard & Mouse
For S-217 / 219 series
Supporting layouts
NSe
NS keyboard integrated with touchpad
■
■
■
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 key notepad keyboard with full numerical pad and SUN function
USB interface
NSb
NS keyboard integrated with trackball
■
■
■
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 key notepad keyboard with full numerical pad and SUN function
USB interface
P.17
Chapter 3
3.3 How to Use "NS" keyboard
■
NS SUN-compatible keyboard incorporates SUN short-cut keys.
■
Press the Fn/Num button to switch the color the Num LED.
Num LED in Off mode
Num LED in Green color
Key pad behaves as a SUN Solaris system
administration command mode
Key pad behaves as a normal key pad mode
Three Audio / Display keys are located in the upper-right corner of the NS keyboard:
■
■
■
Audio : Mute, decrease in volume and increase in volume.
Display : Degauss, decrease contrast and increase contrast.
Please ask your supplier for full details
P.18
Chapter 4
4.1 KVM Options
Our KVM is designed to seamlessly integrate into the rear of our full range of LCD drawer solutions:
■
■
■
■
■
For KVM operation, please refer to KVM user manual
Option with Multiple consoles Matrix KVM
Option with high density & cost efficient Combo KVM integration with either 8 / 16 / 32 ports
Option with low cost PS/2 KVM
Please ask your supplier for full KVM details
Remarks
■ “S” series is for Matrix & Combo KVM only.
4.2 DVI-D Option
Internal power version
DVI-D
3-in-1
VGA KB mouse
console port
External power version
Remarks
■ Package includes 1 x 6ft DVI-D cable
■ The depth of RKP-2415 / 2417 / 2419 will be extended from 480mm ( “18.9” ) to 530mm ( “20.9” )
4.3 BNC + S-Video Option
Internal power version
S-Video
BNC
External power version
Remarks:
■ Package includes 1 x 6ft S-Video cable
P.19
3-in-1
VGA KB mouse
console port
Chapter 4
4.4 Audio Option
Speaker
Power
Audio
Internal power version
External power version
Remarks
■ Audio input is 35mm audio plug
■ The speaker is sharing the same power with LCD.
P.20
3-in-1
VGA KB mouse
console port
Chapter 4
4.5 DC Power Options
Model
12V
24V
48V
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Input rating
Input current
Output rating
Remarks
■ Package does not include power cord and AC power adapter
■ In RKP-2415-1601 / 2417-1601 / 2419-1601 series, the depth will be extended form 480mm ( “18.9” ) to
530mm ( “20.9” )
4.6 Touchscreen Options
e-Resistive
Model
Screen size
-15TRB / -15TRS
-17TRB / -17TRS
-19TRB / -19TRS
15"
17"
19"
Interface
USB / serial
Optical transmittance
80% ± 3%
Surface hardness
≥3H (JIS K5400)
Operating system
Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Capacitive
Model
Screen size
-15TCB / -15TCS
-17TCB / -17TCS
-19TCB / -19TCS
15"
17"
19"
Interface
USB / serial
Optical transmittance
93% ± 2%
Surface hardness
>9H Surface hardness, withstand over 300 million touches
Operating system
Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
Remarks
■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■ Serial touchscreen package includes 1 x 6ft serial cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
■ Touchscreen in other brands are available on request
P.21
Chapter 5
5.1 Troubleshooting
1. Is interference signal appeared on LCD normal when shutting down the computer ?
In rare cases, interference may appear on the monitor. This may be caused by signal rate of VGA card and is considered
normal. The image quality can be improved by adjusting the phase or pixel rate automatically or manually.
2. The membrane power light is not ON
Press the power On / Off on LCD membrane to check if the monitor is in the ON mode.
Check the power cord is properly connected to the LCD keyboard drawer and power outlet.
3. Screen image is not centered or sized properly
Press the
button for two seconds to automatically adjust the image.
Adjust the H-position and V-position settings via On-screen menu.
4. Is the LCD keyboard drawer hot-pluggable ?
The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers and KVMs, may
not be hot-pluggable. We suggest turning off the power to all devices before connecting them. Apply power to connected
devices again only after the LCD keyboard receives power.
For RKP-217 / 219 / 2415 / 2417 / 2419 series
1. How do I adjust the resolution?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are determined by the display card in your computer.
For “S” series
1. How can I adjust the monitor resolution to 1152 x 900 for SUN Micro system ?
The NS solution LCD keyboard drawer will automatically detect the 1152 x 900 resolution, so no user configuration should
be necessary.
2. How do I adjust the resolution in MS Windows operation system?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are determined by the display card in your computer.
3. The Stop-A hot key is not work in Trusted Solaris
The keyboard combination Stop-A (L1-A) is not available in Trusted Solaris by default. The security administrator can
change this.
P.22
Chapter 6
6.1 Dimensions
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
RKP-217 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
RKP-219 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
S-217 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
S-219 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
RKP-2415 series
442 x 480 x 88 mm
17.4 x 18.9 x 3.5"
584 x 616 x 216 mm
23 x 24.3 x 8.5"
17 kg
37 lb
23 kg
51 lb
RKP-2417 series
442 x 480 x 88 mm
17.4 x 18.9 x 3.5"
584 x 616 x 216 mm
23 x 24.3 x 8.5"
18 kg
40 lb
24 kg
53 lb
RKP-2419 series
442 x 480 x 88 mm
17.4 x 18.9 x 3.5"
584 x 616 x 216 mm
23 x 24.3 x 8.5”
18 kg
40 lb
24 kg
53 lb
Model
P.23
Blank page
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which
may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2010 Austin Hughes Electronics Ltd. All rights reserved.
CV-RKP2-0610V7