Network Connectivity
The Actassi system
Seamless end-to-end network connectivity
Actassi puts all the
differences aside!
The best features
of our local brands
and ranges are now
merged into one,
complete global
system – Actassi.
2
Contents
The Actassi system....................................................................................... 4
Actassi 19" Panels......................................................................................... 14
19-C Copper panels............................................................................................................22
19-C Cable management and Accessories..................................................................26
Fixed Panels...........................................................................................................................27
110 Connector System and Patchcords........................................................................29
Actassi Smart Patching solution ..................................... 30
ID-Tracer™ LAN Controller................................................................................................34
Category 6 (UTP) ID-Tracer™ Patch Panel....................................................................34
Category 6/6A ID-Tracer™ Patch Panel.........................................................................34
ID-Tracer™ Intelligent Fiber Optic Panel.......................................................................35
ID-Tracer™ Software............................................................................................................35
Actassi Copper solution ................................................................. 36
Copper connectors .............................................................................................................37
Wall Plates..............................................................................................................................42
Copper Cables......................................................................................................................43
Copper Patch Cords............................................................................................................55
Actassi Fibre solution . ......................................................................... 58
FL-C Fibre Optic Cables.................................................................................................... 64
FL-C Fibre Optic Patch cords............................................................................................73
FL-C Fibre Optic Connectors............................................................................................78
FL-C Fibre Optic Pigtails....................................................................................................79
19-C Fibre Optic Panels, Adapters and Accessories................................................. 80
Actassi 19-E Enclosures.................................................................... 84
Actassi wall-mounted enclosures
KDB flat pack OpenBox enclosure......................................................................... 94
OPB 19" OpenBox enclosure.....................................................................................97
Actassi floor-standing enclosures
BTR 19" Technical rack................................................................................................ 106
VDA 19" Cabling enclosures.......................................................................................107
Data Center Patching Frame...................................................................................... 110
VDS 19" Server enclosure............................................................................................. 111
Actassi 19-E Universal Accessories...............................................................................116
Earth connection............................................................................................................116
Fixing components........................................................................................................116
Shelves ..............................................................................................................................117
Power distribution..........................................................................................................118
Cable management .....................................................................................................120
P & S 19" Customisation service.....................................................................................124
Technical info ...................................................................................................................... 125
Network Connectivity | 04.2012
Actassi | 3
P126280
4 | Actassi
04.2012 | Network Connectivity
Enhanced performance,
that’s the Actassi effect.
A network set-up never gets better than the way it was planned from the start. That’s why
the Actassi system includes everything you need, from enclosures and patch panels, to
cables and connectors. All are easily integrated with our products to improve accessibility.
P130060
Actassi enhances the
network performance
in offices, data centres,
hospitals and schools.
Connectivity to
the power of you!
Your skills
Our skills and
innovations
By choosing Actassi, which is integrated with
all other Schneider Electric solutions, your skills
will be greatly empowered. Designed for, and in
cooperation with installers and IT professionals
our network connectivity solutions combine all
areas of expertise, allowing you to make the
most of your networks.
Network Connectivity | 04.2012
Actassi | 5
Superior usability
By constructing a complete system, we have made sure that there will never be
incompatible differences in-between parts. But as an installer, we believe you would like to
know the specifics. Let’s take a closer look at some less visible Actassi advantages!
The new Actassi CL-MX
cable has a patented
metallic crossfiller for
better link performance
and less installation
operations. No need of
separation distance to
power cabling and no
need of ANEXT field
testing.
The high-performance The pre-equipped
CL-MX cable
19" panels
Actassi VDS allows
airflow of 80%
A new and innovative shielded
The Actassi 19" patch panels
The new Actassi enclosure for
Cat 6A cable with 3 times faster
with sliding and quick-fix
server applications is very
installation and a superior transfer
function, automatic earthing,
robust and can be mounted
impedance performance. The
quick-release button and rear
with up to 750 kg of 19" com-
secret is the patented single-foil
cable identification will delight
ponents. The micro-perforated
metallic crossfiller that brings 3x
any professional.
door ensures superior air
shielding, improved EMC and
circulation. Cable entries at
less cutting operations.
the sides enable ergonomic
installations.
6 | Actassi
04.2012 | Network Connectivity
P126926
Actassi helps you get
more jobs done by
speeding up each task.
Network Connectivity | 04.2012
Actassi | 7
Install seamless
end-to-end connectivity
Actassi includes everything needed to install and operate network
connections simply and intuitively. Technical innovations and ergonomic features exceeding the demands of end-users and installers,
enhance productivity in every workplace.
Actassi is easy to specify,
install, use and upgrade.
Together with our OptiLine
installation system you
will have a very flexible
network access.
Actassi 19" Enclosures
A complete range of products including all
sizes of enclosures, from 6 units to 47 units with
different widths, depths and compositions.
Quick Fix
Our 19" panels are all
equipped with the Quick
Fix function, allowing
simple, firm and convenient installation and
maintenance.
CL-MX cable
The new Actassi CL-MX
cable has a patented
metallic crossfiller which
brings 3x shielding and
superior EMC. Still it's
3 times faster to install!
8 | Actassi
Actassi 19" Panels
Sliding function, automatic earthing, quick-release
button and rear cable identification make the
Actassi 19" panel a delight to install.
Actassi S-One – Twice as fast
The new Actassi RJ45 connector, with features
like the smart bridle, is up to 50% faster to connect than most other connectors.
04.2012 | Network Connectivity
Cable management for perfectionists
Every cord and cable is easily fixed and fastened
in its designated place.
Clear marking
Both patch panels and connector face plates are
equipped with a system for clear marking.
Expand in no time
The patch panels are pre-equipped and have
benefits such as the Quick Fix and a convenient
sliding function.
Network Connectivity | 04.2012
Actassi | 9
Complete peace of mind
Did you connect the right wire? Did you remember earthing? With Actassi you never have
to worry again. The shielded connectors have an automatic 360° earthing, so you will save
time and provide safe installations simultaneously. But security isn’t only a built-in feature
in products. It’s also a philosophy that has governed the way we have designed the Actassi
support services and warranties.
We offer comprehensive
training programmes
as well as extensive
warranties.
You will get it right, intuitively
Actassi is built on intuitive installation technology,
making it very hard to fail. But if there are any
Actassi system warranty
covers the complete
network, from the technical
room to the workstation.
Ask your local Schneider
Electric sales office for
detailed information on
the warranties and
support resources in
your country.
uncertainties, don’t hesitate to call your local
support services.They are happy to answer your
questions. And if there is something you would
like to excel at, you are always welcome to join
our training programmes.
Certified standard and global accessibility
The Digital Rule helps you select products
All Actassi products are certified to the highest
Do you find it hard to select RJ45 connectors,
standards by a third party. Several products
patch panels, cables and enclosures? Visit
actually exceed international standards to give you
schneider-electric.com and try our Digital Rule.
true top-class performance and reliable connec-
It’s an intelligent online e-catalogue which will
tivity. Our worldwide presence and well-known
facilitate your choices and ensure an error-free
distribution partners also ensure both global and
specification.
local access to our products and services.
10 | Actassi
04.2012 | Network Connectivity
Environment in focus
Energetic and environmental responsibility lies at the core of Schneider Electric culture
and strategy. We strive to reduce the environmental impact of our products throughout their
entire life-cycle, particularly through eco-design and eco-production.
Actassi is compliant
with RoHS, the REACH
European directives and
PEP Eco passport.
Product Environmental
Profile available on request.
Eco-design
Actassi CL-MX cables
is one example of Ecodesign. Halogen-free,
flame or fire retardant.
In case of fire, the result
of using Actassi CL-MX
is the reduction of the
emissions of opaque
smoke and acid gases.
Thus, it helps reducing
damages to equipment
and allows people to
escape from the building
more easily.
The European Union enacted an Energy using
Although Schneider Electric’s supply is outside
Products (EuP) framework directive in 2005
of the EuP target, it generalises the eco-design
(directive on the eco-design of products) which
approach to all its developmental activities and
seeks to promote eco-design approaches in
undertakes to communicate the environmental
priority sectors, or even to specify the aims of
features of its products through Product Environ-
impacts for some products.
mental Profiles (PEPs)
Product Environmental Profile
For each product Schneider Electric undertakes
to publish a Product Environmental Profile (PEP).
It provides customers with information on their
environmental performances during their life cycle
as well as the best treatment solutions at the
end of their life. To ensure transparency and the
validity of the data, it complies with ISO 14025
in an inter-professional programme which sets
shared calculation and drafting rules for publishing the environmental impacts of products.
Network Connectivity | 04.2012
Actassi | 11
Choose a seamless network
Actassi does far more than simply showcase technological achievement. In making
technology work for you, Actassi delivers true and seamless end-toend connectivity. Our
target is to provide stylish and ergonomic network connections wherever you need them,
to make life easier and enhance your productivity and peace of mind.
From your data
centres
to your meeting
rooms
Actassi is designed to delight technologically-
Delight internal and external customers by creating
savvy IT professionals. Combined with our
an organized and systematic impression of your
ID-Tracer
TM
With new IP-reliant VoIP,
video streaming, live feed
and surveillance applications emerging constantly,
ensuring optimal speed,
reliability and cost-effectiveness is more vital than
ever. Effectively futureproofing any infrastructure, Actassi solution will
always keep you ahead of
the technological curve.
Smart Patching Solution, our "Tough"
meeting rooms with Actassi’s secure, reliable
Cabling will ensure your IT teams can maximize
and easily wired network connections. Install
control of network connectivity systems, and
our Ergo-Aesthetic Terminals and say “goodbye”
greatly simplify both network, planning and
to the headache of tangled patch cords on and
operations.
under your conference tables.
to your
workstations
and even on the
road...
Improve ergonomics at your workstations
When traveling out of town on business or
with our Ergo-Aesthetic Terminals. Delivering
pleasure, you are sure to be delighted with the
convenient connectivity, they let you start your
wealth of thoughtful little Actassi details you will
work right away rather than having to bend down
find inside your hotel room. This is especially true
under the desk and fumble hopelessly around
when you want to get online and surf the net.
for patch cords.
With Actassi, you will never have to travel very far
to experience the ultimate blend of technology,
artistry and beauty.
12 | Actassi
04.2012 | Network Connectivity
A short Actassi summary
Here is a short summary for you: Actassi is Schneider Electric’s new global state-of-the-art
range for networking and connectivity infrastructure solutions, created for buildings and
data centres. It consists of the best performing features from local Schneider Electric brands
such as LexCom, Infraplus, Clipsal Datacomms, Sarel and Himel. To be able to offer every
installer around the world, the best-of-the-best solutions, we have created ONE single system; Actassi.
All products are designed to give superior
The Actassi system consists of a comprehensive
usability and performance. They exceed the
set of products:
most advanced international standards, such as
Searching for a smaller
sized home solution?
LexCom Home should
be your choice. You'll get
data, TV and telephone
in all rooms, and even
access to all medias at
the same time from the
same outlet.
ISO/IEC 11801:2011 Ed2.2 for the new S-One
>
Cat 6A performance
connector. All S-One and Blue-Link connectors
are manufactured to provide exceptional Cat 5e,
Cat 6 and Cat 6A performance for shielded and
unshielded data networks.
Furthermore Actassi is fully integrated with a
wide range of other Schneider Electric solutions
Connectors for Cat 5e, Cat 6 and
>
Cross-connect panels
>
Copper and fibre optic LAN cables
>
Patch cords and connecting hardware
>
Cabling and server enclosures
and products, such as Cable Management Systems or Lighting Control to create a true organic
office – contact us for more details.
Network Connectivity | 04.2012
Actassi | 13
14 | Actassi
04.2012 | Network Connectivity
Actassi 19" Panels
Presentation. ............................................................................................................................ 16
Range
19-C Copper panels.................................................................................................. 22
19-C Cable management and Accessories ........................................26
Fixed Panels . ................................................................................................................... 27
110 Connector System and Patch Cords. ..............................................29
Network Connectivity | 04.2012
Actassi | 15
Actassi 19" patch panels
The Actassi 19" panels are indeed an installer’s delight! They are innovative, simple and
efficient. They are also part of the global Actassi product portfolio for Network Connectivity including connectors, cables and enclosures. Actassi is also a vital component of TOP
– the Total Office Performance system – making workspaces energy efficient, flexible and
comfortable. TOP includes everything from power and data distribution, to safety systems
and lifespace controls. So, when you choose Actassi you’ll get superior usability and a truly
seamless end-to-end connectivity.
16 | Actassi
04.2012 | Network Connectivity
Making professional IT and
network installations easy
Now, furnishing or main­taining our 19" racks with panels couldn’t be done easier or faster.
Actassi panels are all equipped with the Quick Fix function, a mechanism mounted at each
side of the 1U panel, which helps them to be quickly opened.
All Actassi panels are
equipped with the smart
and innovative Quick Fix
function.
Fibre optic
Data
Telecom
A panel for every need
Visit: http://tv.schneiderelectric.com, to download the Actassi Panels
video
We’ve got panels for fibre optic, data and
protection against dust. And the best of it all,
telecom. They have all been developed with
the panels are also available pre­-equipped, to
two words in focus - easy and smart. Some
make your ordering and installation as simple as
examples; Quick Fix function, sliding panels,
possible. Of course power panels are also part
clear marking and easy cable management. The
of our offer.
fibre optic panels also have a highly developed
Quick Fix
Just press the button
and the panel smoothly
slides out. Other Quick
Fix secrets are the guiding fin­gers and the pre­
-mounted screws. The
integrated label holder
gives the panel a unique
identity.
Homogeneous design
Actassi is not only a high
quality system, it also
looks good! The appearance is really professional since we have
kept the same aesthetics
for the whole range.
Network Connectivity | 04.2012
Future proof
All Actassi products are
part of our modular offer
for creating a professional IT and network
environment. The robust
design, construction and
high-quality materials
are other long-lasting
guarantees. That’s why
the Actassi products are
future proof.
Good overview
The transparent front lids
and the top cover protect the patchcords and
fibres, and give a clear
visibility of the inside.
Actassi | 17
Actassi data panels
The data panels con­tain a front configuration for 24 RJ45 connectors. Most panels have the
smart Quick Fix function. They are also available pre-­equipped with connectors, shutters,
label holders and a rear cable organizer. We try to make your life as easy as possible.
Actassi S-One
The connectors are a one-piece design for very fast
and reliable wiring. Actassi S-One exceeds component hardware certification for standards like ISO/
IEC 11801 amendment 2:2010 for Cat 6A, ensuring
optimized network performance.
Sliding helps installation
Maintenance and extensions are smoothly
performed with the help of the Quick Fix slid­ing
function.
Cable management
Apart from the systems
with colour codes, labels
and numbers, the technical setup at the rear of
the panel is designed to
enhance order. Cables
of various diameters are
easily mounted and kept
in place in specified
slots.
18 | Actassi
Rear position numbers
Keeping track of each
RJ45 could sometimes
be very hard. Actassi is
changing all of that! The
cable numbers at the
rear correspond to those
at the front, simplifying
installation and maintenance from both sides of
the rack.
Automatic earthing
An automatic earthing
for FTP/STP versions is
integrated in the panel.
04.2012 | Network Connectivity
Clear front marking
Each panel plate has an
openable label holder.
Print your own labels or
use the included versions
with pre-printed port
numbers. Each shutter
can also be colour coded for quick identification
in both open and closed
positions.
Actassi fibre optic panels
A simple all-­in-one concept, pre-­equipped with for example Quick Fix function, coiling
wheels and cable glands. It has a capacity of 24 (SC Duplex) / 48 (LC Duplex) fibres and
has transparent lids for protection and a clear visibility of the inside. Can hold up to 4 cover
plates, and since it is delivered with 3 blank plates, the choice is open for the fourth to be
used according to your needs. The cover plates are available in empty and pre-­equipped
versions with adapters.
To match your fibre optic
panel we have developed
a range of pre-­equipped
cover­plates. It’s a time­saving, safer and smarter
way to work with your
installations.
Coiling wheels
The panel contains
wheels to keep the fibres
in place and to avoid
tension on the connectors. This will also
give a correct bending
radius and more space
for excess lengths of the
fibres.
Excellent protection
The transparent covers
give both protection
and overview. The front
covers can be opened
for quick access and
the top cover is easily
removed.
Rear quick fixation
A quick-fixation system
is provided for the cables at the rear. Use the
provided 16 mm glands
for cables. If a 21mm
gland (not provided) is
needed, just remove the
rear plastic support and
fix the gland directly in
the cable entry. Quick
and easy!
Sliding function
The panel can be slided
or completely removed
for a more convenient
working position.
Network Connectivity | 04.2012
Clear marking
Since the marking is
very clear, identify­ing the
cable you are looking for
will never be a problem.
Integrated guiding
panel
A patchcord guiding
panel, with smoothly
shaped edges to protect
the cords, is integrated
in the panel. So there
is no need to add a
separate guiding panel
that would take another
1U space.
Actassi | 19
Actassi telecom panels
The smart and high capacity 19" telecom patch panel provides up to 50 connections. Very
easy fixation of the panel thanks to the Quick Fix function with guiding fingers and pre­mounted screws. The label holders are easily opened without using any tool.
Exceptional robustness
The sliding function does not deteriorate the stability.
As a proof you can use the punch down tool for LSA
contacts with the panel in a sliding-out position. You
don´t need to remove it from the rack first!
Punch down tool
This is the punch down
tool for LSA contacts,
to be used for telecom
cable connections.
20 | Actassi
Cable identification
No need trying to figure
out which cable goes
where. The cable identification is very clear on
the clever fixing guides.
Safe and easy earthing
The panel has two earthing connection points
for both shielded cables
and for the rack, easily
accessible at the rear.
04.2012 | Network Connectivity
Clear marking
The telecom panel
comes with pre-printed
labels and openable
label holders.
Cable managers and accessories
The Actassi system also includes a range of power panels and smart accessories for improved cable management. The power panels are available in several versions, for example
with a protected light switch and overvoltage protection. The innovative patchcords guiding
panel is equipped with four openable rings, managing up to 24 cords.
Brush panel*
A patch-cord guiding panel for path-through application, blocking air-flow for a better cooling on the
cabinet.
* Available from end 2012
Blank panel
For a homogeneous design this accessory, a blank
metal panel, comes in handy. Instead of an empty gap
you’ll have an aesthetically clean and designed front
cover.
Guiding panel
Keep the cords in order! This smart panel manages
24 to 48 cords. It´s easily opened but still safe, since
a clever device prevents cords from falling out. Also
possible to pull out only one cord if needed.
Vertical rings for rack 800mm wide
A smart detail – attached to each side of the guiding panel (or any panel maintained by the Quick Fix)
these vertical rings will support and fasten your installation with a 48 cord capacity.
Vertical rings for rack 600mm wide
For the 600mm wide racks, use the smaller tie up
devices to keep your installations in neat order.
Network Connectivity | 04.2012
Actassi | 21
Actassi 19" Panels
19-C Copper panels
Range
Telecom panel 50 ports
■■ Telecom panel 50 ports in 2 rows.
■■ 1U height.
■■ The telecom cable wires are terminated in LSA punch down blocks on the PCB
according to a clear numbering.
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position and
sliding feature.
■■ With label holders.
■■ Cable organizer at the rear with number identification.
■■ Active Pin-out: 63,45 (2 pairs) for telephony.
■■ Includes two cage nuts M6 compatible with 8,5 x 8,5mm & 9,5mm x 9,5mm 19”
perforations.
■■ With label holder and automatic earth kit.
■■ LSA punch down tool VDIB299001 requested.
■■ Dark grey RAL7016.
Description
Reference
Telecom panel 50 ports
VDIG141501
VDIG141501
Equipped sliding panel 1U 24 ports
■■ Equipped sliding 19" copper panel (with connectors, not mounted).
■■ 1U height, 220mm depth.
■■ 24 RJ45 ports.
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position and
sliding feature.
■■ Evolution : Panels equipped with 24 shutters in light grey, 4 label holders, and
one cable manager at the rear.
■■ Metal sheet: Thickness 1,2 mm. Dark grey RAL 7016.
■■ Plastic parts in PA66 GF20 or PA6.
■■ Simple clicking connectors for mounting.
■■ Automatic earthing with the pre-equipped bus bar for FTP/STP versions.
■■ Dark grey RAL7016.
Evolution version: Pre-equipped with 24 RJ45 Slim connectors (not mounted) and 24
light grey shutters, 4 label holders, 1 rear cable organizer.
Description
Category 5e
Equipped panel 1U with 24 RJ45 Cat 5e UTP
Equipped panel 1U with 24 RJ45 Cat 5e FTP
VDIG112241U50 /
VDIG112241F50
Category 6
Equipped panel 1U with 24 RJ45 Cat 6 UTP
Equipped panel 1U with 24 RJ45 Cat 6 STP
Category 6A
Equipped panel 1U with 24 RJ45 Cat 6A UTP
Equipped panel 1U with 24 RJ45 Cat 6A STP
22 | Actassi
04.2012 | Network Connectivity
Reference
VDIG112241U50
VDIG112241F50
VDIG112241U60
VDIG112241B60
VDIG118241UX0
VDIG328241BX0
Actassi 19" Panels
19-C Copper panels
Range
Empty flat panel with connectors in angle, 1U 24 ports
■■ 1U height.
■■ 24 RJ45 ports.
■■ Allows high-density cooper ports installation. Connectors are positioned in angle
Recommended mounting with vertical side ring for vertical management of the
patch-cords (reference VDIM189412).
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position and
sliding feature.
■■ Equipped with a label holder and a cable manager at the rear.
■■ The cable manager can rotate and be removed to ease the accessibility.
■■ Metal Sheet: Thickness 1,2mm.
■■ Dark grey RAL 7016.
■■ Plastic parts in PA66 GF20 and PC.
■■ Simple clicking the connectors for mounting.
■■ Automatic earthing with pre-equipped bus bar.
■■ Use S-One RJ45 connectors to load the panel.
■■ Connectors details on page 40 (request two pack of 12).
Description
Empty flat panel with connectors in angle 1U FTP/STP 24 ports*
Reference
VDIG328241BX0
* Available from end 2012
VDIG328241BX0
Equipped flat panel with connectors in angle, Cat 6A
STP, 1U 24 ports
■■ 1U height.
■■ 24 RJ45 ports.
■■ Allows high-density cooper ports installation. Connectors are positioned in angle
Recommended mounting with vertical side ring for vertical management of the
patch-cords (reference VDIM189412).
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position and
sliding feature.
■■ Equipped with a label holder and a cable manager at the rear.
■■ The cable manager can rotate and be removed to ease the accessibility.
■■ Metal Sheet: Thickness 1,2mm.
■■ Dark grey RAL 7016.
■■ Plastic parts in PA66 GF20 and PC.
■■ Simple clicking the connectors for mounting.
■■ Automatic earthing with pre-equipped bus bar.
Equipped flat 19" copper panel with connectors in angle (connectors included, not
mounted)
Description
Equipped flat panel with connectors in angle 1U with 24 RJ45
Cat 6A STP*
Reference
VDIG328241BX
* Available from end 2012
VDIG328241BX
Network Connectivity | 04.2012
Actassi | 23
Actassi 19" Panels
19-C Copper panels
Range
Empty fixed panel for keystone UTP connectors
1U 24 Ports
■■ Empty fixed 19" copper panel (without connectors).
■■ 1U height.
■■ 24 RJ45 ports.
■■ Supports up to Cat5e / Cat6 connectors (references on page 41). Cat6A UTP
connectors
not supported.
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position.
■■ Panels equipped with 4 labels holders and a metal tray cable manager.
■■ Metal sheet: Thickness 1,2mm. Dark grey RAL 7016.
■■ Plastic parts in PA66 GF20 or PA6.
■■ Simple clicking connectors for mounting.
■■ Optional cable organizer (Reference VDIM11U001) can be added.
Evolution version: Pre-equipped with 4 label holders and a metal tray cable manager.
Description
Empty panel 1U for S-110 connectors Keystone UTP 24 ports
Reference
VDIG113241U
VDIG113241U
Loaded panel for keystone UTP connectors
1U 24 Ports
■■ Loaded 19" copper panel (with connectors, not mounted).
■■ 1U height.
■■ 24 RJ45 ports.
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position.
■■ Panels equipped with 4 labels holders and a metal tray cable manager.
■■ Metal sheet: Thickness 1,2mm. Dark grey RAL 7016.
■■ Plastic parts in PA66 GF20 or PA6.
■■ Simple clicking connectors for mounting.
Evolution version: Pre-equipped with 24 RJ45 S-110 Keystone connectors (not mounted)
and a metal tray cable manager.
Description
VDIG113241U50 /
VDIG113241U60
Category 5e
Equipped panel 1U with 24 RJ45 S-110 connectors Keystone
Cat 5e UTP (reference VDIB17765UBK)
Category 6
Equipped panel 1U with 24 RJ45 S-110 connectors Keystone
Cat 6 UTP (reference VDIB17766UBK)
Reference
VDIG113241U50
VDIG113241U60
Cable organizer
■■ Pack of 4 cable plastic organizers to click on the back of the cable manager.
■■ Option for fixed panel VDIG113241U, VDIG113241U50, VDIG113241U60
already included on sliding patch panels.
VDIM11U001
24 | Actassi
Description
Cable organizer for fixation of up to 24 cables inside the panel
04.2012 | Network Connectivity
Reference
VDIM11U001
Actassi 19" Panels
19-C Copper panels
Range
Patchcord guiding panel (Quick fix, metal base)
■■ Patchcord guiding panel.
■■ 1U / 2U.
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position.
■■ 4 openable rings, to support 24 patchcords (1U) or 48 patchcords (2U).
■■ Patchcord holder integrated inside the ring for opened position.
■■ Fixed version available.
■■ Dark grey RAL7016.
■■ Two cage nuts included.
Description
Reference
Patchcord guiding panel 2U with 4 openable rings*
VDIG188142
Patchcord guiding panel 1U with 4 openable rings
VDIG188141
VDIG188141
VDIM189412
* Available from end 2012
Patchcord guiding panel (fixed, plastic)
■■ Rack mount clips eliminate the need for cage nuts and screws.
■■ Reinforced cable management rings can accommodate up to 50 patch cords.
■■ Cavities behind each ring provide additional space for cable slack.
■■ Additional depth on cable rings ensures compliance with minimum bend radius
requirements.
■■ Compliments Actassi Patch Panel styling.
Description
Patchcord guiding panel 1U fixed
Reference
ACTRJ1UCMPC
ACTRJ1UCMPC
Patchcord guiding panel (fixed, metal base)
■■ Panel with metal fingers and plastic cover.
■■ Metal base powder coated to provide protection against scratches and dust.
Description
Patchcord guiding panel 1U fixed
Reference
ACTRJ1UCMPM
ACTRJ1UCMPM
Brush panel (Quick fix, metal base)
■■ Patch-cord guiding panel for path-through application.
■■ 1U.
■■ Dark grey RAL 7016.
■■ Blocking air-flow for a better cooling on the cabinet.
■■ For connection from the back to the front of the cabinet, such as blade server
connectivity, or NVR/DVR CCTV video storage.
Description
Patchcord brush panel 1U*
VDIG188201
Reference
VDIG188201
* Available from end 2012
Network Connectivity | 04.2012
Actassi | 25
Actassi 19" Panels
19-C Copper panels
Range
Vertical rings
■■ Rings for vertical management of patchcords.
■■ Openable.
■■ For racks 800 x 800 mm and 600 x 600 mm.
■■ Can be fixed on each side of any QuickFix system panel or guiding panel.
■■ Large capacity up to 48 cords.
Description
Reference
Rings for vertical management of patchcords, for rack 600 or 800 mm
wide
VDIM189412
Rings for vertical management of patchcords, for rack 600 mm wide
VDIM189111
Rings for vertical management of patchcords, for rack 800 mm wide
VDIM189112
VDIM189112
VDIM189412
VDIM189111
RJ45 Shutters
Description
VDIM11U***
Shutters, blue, pack of 24 pcs
Shutters, yellow, pack of 24 pcs
Shutters, green, pack of 24 pcs
Shutters, red, pack of 24 pcs
Shutters, grey, pack of 24 pcs (already included in Quick fix panel)
Reference
VDIM11U241
VDIM11U242
VDIM11U243
VDIM11U244
VDIM11U246
Rack earthing kit
Description
Rack earthing kit, pack of 10 pcs
Reference
VDIM48E011
VDIM48E011
Metal blank panel
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position
Description
Reference
Blank panel 1U
VDIG188021
VDIG188021
Metal shelf
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position.
Description
Shelf 1U, depth 250 mm, for max weight 15 kgs
Reference
VDIG188011
VDIG188011
Tool
Punch Down Tool for LSA contacts, to use for Telecom panel cable connection
Description
Punch down tool LSA Contacts
VDIB299001
26 | Actassi
04.2012 | Network Connectivity
Reference
VDIB299001
Actassi 19" Panels
19-C Copper panels
Range
Fixed Panel 1U 24 ports
■■ Key Stone footprint, supporting Blue link connector.
■■ 1U height.
■■ 24 RJ45 ports.
■■ Front Labelling System.
■■ Compatible with 19” equipment rack.
■■ Fully compliant with ISO/IEC 11801 Edition 2 2002 and ANSI/TIA/EIA-568-B
Series Connecting hardware solutions.
■■ Power coated for protection against scratches and rust.
■■ Rear cable holder included.
Fixed Unloaded Panel
Description
Empty panel 1U STP Keystone Connector
(Use Keystone STP connectors to load the panel.
Connectors details on page 41, Max 24 ports)
ACTPPS24NSU
Reference
ACTPPS24NSU
Empty panel 1U UTP Keystone Connector
ACTPP6U24NSSUN
(Use Keystone UTP connectors to load the panel.
Connectors details on page 41. Not suitable for Cat 6A UTP application.
Max 24 ports)
ACTPP6U24NSSUN
Empty panel angled 1U STP Keystone Connector
ACTPPAS24NS
(Use Angled Keystone Cat 6 or Cat 6A STP connector to load the panel.
Connectors details on page 41. Not suitable for Cat UTP application.
Max 24 ports)
ACTPPAS24NS
Empty panel 1U UTP Keystone Connector
(Use Angled Keystone Cat 6 UTP connector to load the panel.
Connectors details on page 41. Not suitable for Cat 6A UTP application.
Max 24 ports)
ACTPPAU24NS
Fixed Cat 6A Loaded Panel
Description
Reference
Equipped panel 1U UTP Cat 6A with 24 RJ 45 Keystone Connectors,
Non - Shutter
ACTPP6ATGU24NSS
Equipped panel 1U UTP Cat 6A with 24 RJ 45 Keystone Connectors,
Shutter
ACTPP6ATGU24SHS
Equipped panel 1U STP Cat 6A with 24 RJ 45 Keystone Connectors
ACTPP6ATGS24NSS
ACTPP6ATGU24NSS
ACTPP6ATGS24NSS
Network Connectivity | 04.2012
Actassi | 27
Actassi 19" Panels
19-C Copper panels
Range
Fixed Cat 6 Loaded Panel
Description
Reference
Equipped panel 1U UTP Cat 6 with 24 RJ 45 Keystone Connectors,
Non - Shutter
High Density Panel
ACTPP6U24NSS
Equipped panel 1U UTP Cat 6 with 48 RJ 45 Keystone Connectors
RJ6HD48PPCC
ACTPP6U24NSS
RJ6HD48PPCC
Fixed Cat 5e Panel
Description
Equipped panel 1U UTP Cat 5e with 48 RJ 45 Keystone Connectors
RJ5EHD48PPCC
28 | Actassi
04.2012 | Network Connectivity
Reference
RJ5EHD48PPCC
Actassi 19" Panels
19-C Copper panels
Range
110 Connector System
Key Features
bb Popular 110 connector technology.
bb Available with or without legs for the Block Base.
bb Speedy 5-Pair punch down Block Base saving installation time and cost.
bb Suitable for jumper wire or patch cords.
bb 4 and 5-Pair 110 connectors available.
Customer Benefits
bb More cost-effective solution than RJ45 patching solutions.
bb Supports Category 5e performance.
bb Wire management available for jumpers and patch cords to prevent accidental
disconnection.
bb Label holder and label for easy circuit identification.
bb 1,2 and 4-Pair patch cords available for data, fax and voice applications.
Description
50-Pair, Base Connector, without Legs
50-Pair, Base Connector, with Legs
100-Pair, Base Connector, without Legs
100-Pair, Base Connector, with Legs
110 Cable Management Panel
4-Pair Connector (100 pcs/bag)
5-Pair Connector (100 pcs/bag)
4 and 5-Pair Connector Kit (for 100-Pair) (20xC4 + 4xC5)
Wall box-miniatune
110 Kit, 50-Pair Base and 10xC4 + 2xC5 Connector, without Legs
110 Kit, 50-Pair Base and 10xC4 + 2xC5 Connector, with Legs
110 Kit, 100-Pair Base and 20xC4 + 4xC5 Connector, without Legs
110 Kit, 50-Pair Base and 20xC4 + 4xC5 Connector, with Legs
100-Pair, 19” Rack Mount
ACTC5E110WMW100
Reference
ACTC5E110WMN50
ACTC5E110WMW50
ACTC5E110WMN100
ACTC5E110WMW100
ACT110CMP
ACTC5E110BL4P
ACTC5E110BL5P
ACTC5E110BL45P
C110RJ015CC
ACTC5E110WMN50K
ACTC5E110WMW50K
ACTC5E110WMN100K
ACTC5E110WMW100K
ACTC5E110RM100P
Category 6 110-RJ45 Patch Cords
Key Features
bb UL Listed CM Fire rated jacketing.
bb PE insulation on conductors.
bb PVC outer jacket material.
bb Available in multiple lengths and 1,2 and 4-pair configuration.
Customer Benefits
bb Category 6 ANSI/TIA/EIA-568-B compliant.
bb Available in various lengths to assist in better cable management.
bb Available in multipair configuration to cater to data, fax and voice applications.
Description
Reference
Category 6, 110-RJ45, 1-Pair, Patch Cord, 1.0m
ACTC6110PC1PB1
Category 6, 110-RJ45, 1-Pair, Patch Cord, 2.0m
Category 6, 110-RJ45, 1-Pair, Patch Cord, 3.0m
Category 6, 110-RJ45, 2-Pair, Patch Cord, 1.0m
Category 6, 110-RJ45, 2-Pair, Patch Cord, 2.0m
Category 6, 110-RJ45, 2-Pair, Patch Cord, 3.0m
Category 6, 110-RJ45, 4-Pair, Patch Cord, 1.0m
Category 6, 110-RJ45, 4-Pair, Patch Cord,2.0m
Category 6, 110-RJ45, 4-Pair, Patch Cord, 3.0m
ACTC6110PC1PB2
ACTC6110PC1PB3
ACTC6110PC2PB1
ACTC6110PC2PB2
ACTC6110PC2PB3
ACTC6110PC4PB1
ACTC6110PC4PB2
ACTC6110PC4PB3
ACT6110PC1PB2
Network Connectivity | 04.2012
Actassi | 29
30 | Actassi
04.2012 | Network Connectivity
Actassi Smart
Patching Solutions
Range
ID-TracerTM LAN Controller.................................................................................34
Category 6 (UTP) ID-Tracer™ Patch Panel........................ 34
Category 6 / 6A ID-TracerTM Patch Panel ................................................34
ID-TracerTM Intelligent Fiber Optic Panel ..............................................35
ID-TracerTM Software................................................................................................35
Network Connectivity | 04.2012
Actassi | 31
32 | Actassi
04.2012 | Network Connectivity
ID-TracerTM, enjoy comfortable
full control at all times
The hardware excellence
of our Smart Patching Solution will further enhance
the performance of our
ID-TracerTM solution.
Today’s IT Professionals must respond quickly to network planning and operations. The
biggest challenges involve setting up large IT infrastructures for new or newly relocated
offices, and network management changes resulting from company re-structuring. Including patch panels, LAN controllers and software, our ID-TracerTM Smart Patching Solution
ensures efficient and reliable remote patching of such large dynamic networks.
Your ideal guiding light for patching
The hardware excellence of our Smart Patching Solution will further enhance the performance
of our ID-TracerTM solution:
- Efficient patching of port IDs with dynamic labelling
- Changeable port ID numbers with scrolling LEDs in up to 5 digits
- Channel designation via function-icons changeable in 6-colors
- Optional “green”, energy-efficient sleep mode on LEDs
- Simple system set up of LAN Controllers with a built-in power supply
- Enables Network Administrators to carry out real-time M.A.C.s (Move, Add, Changes)
anytime, anywhere via a userfriendly software interface
- Instant disconnection alerts ensure more secure control of network activities
- Standard patch cords supported
Network Connectivity | 04.2012
Actassi | 33
Actassi
Smart Patching Solutions
Range
The Actassi Smart Patching Solution consists of Actassi Patch Panel, ID-Tracer™
Control Software, and LAN Controller.
ID-Tracer™ LAN Controller
Each Actassi LAN Controller is an intelligent product that provides power supply and
control management for up to 10 Actassi Patch Panels. It has dynamic LED lights to
indicate the power status of the overall Actassi LAN Controller as well as the online
status for each connected Actassi Patch Panels.
Product features
bb Dynamic LED display to indicate power status “on/off”.
bb Dynamic LED display to indicate panel connectivity status.
bb Supports up to 10 Actassi patch panels simultaneously.
bb Real-time remote patching.
Customer benefits
bb Explicit indication of power status and patch panel connection.
bb Reliable operation life cycle.
bb Easy network management of large and dynamic networks.
Description
Reference
ID-TracerTM LAN Controller (for LAN version)
TPFPU10
TPFPU10
Category 6 (UTP) ID-Tracer™ Patch Panel
The Actassi ID-Tracer™ Patch Panel is an intelligent Category 6 Patch Panel with
built-in connectivity monitoring to report and monitor the online connectivity status of
the entire cabling network. Network administrators are able to manage overall
network activities such as Move, Add or Change (MAC) in an easy manner.
Customers are able to plan and optimize their network resources while dealing with
various Cabling requirements. The Actassi Patch Panels are scalable by as few as
24-ports (single panel version). LAN version is also available by matching one Actassi
LAN Controller per group of maximum 10 Actassi Patch Panels.
Product features
bb Scalable by as few as 24-ports (one single patch panel).
bb Dynamic labeling port ID in scrolling LED up to 5 digits.
bb Dynamic channel designation by functional icons in 6-colors.
bb Real-time security alert for disconnection and unauthorized patching.
bb Patch Cords contact-switch mechanism.
bb Compatible with standard 19” cabinet/rack.
bb 5 levels of LED luminous intensity.
bb Automatic sleep mode by preset functions.
Customer benefits
bb Explicit ID labeling and LED indication.
bb Allow distinguish icon identifications.
bb Provide connectivity monitoring and security alert.
bb Login security for authorized personnel.
bb Real-time record for any MACs for Network administrator.
Description
Reference
Actassi Category 6 UTP ID-TracerTM Patch Panel, 24-Port
RJ6A1/24PPPS
RJ6A1/24PPPS
Category 6/6A ID-TracerTM Shielded Patch Panel
Product features
bb Replaceable Shielded Modular Jack.
bb Replaceable LED module.
bb Patch cords contact-switch mechanism.
bb Wake-up button during Sleep Mode.
bb Fully comply TIA/EIA-568C and ISO/IEC 11801 Category 6A Standards.
Description
Reference
Actassi Category Cat 6A STP loaded
ACTPP6ATGS24NSL
Actassi Category Cat 6 STP loaded
ACTPP6S24NSL
ACTPP6ATGS24NSL /
ACTPP6S24NSL
34 | Actassi
04.2012 | Network Connectivity
Actassi
Smart Patching Solutions
Range
ID-Tracer™ Intelligent Fiber Optic Panel
Actassi ID-Tracer™ intelligent fiber optic patch panel comes with built-in monitoring
capabilities, reporting and monitoring the entire wiring network online while in
connected state. The network administrator can easily manage the entire network of
activities, such as move, add or change (MAC).
Patch panel itself is not pre-installed and can be fitted with adaptor plates in a group
of 3 in one panel. The adaptor plates come with an option of either 8 LC or SC
adaptors.
Product features
bb Explicit ID labeling and LED indication.
bb Provide connectivity monitoring and security alert.
bb Real-time record for any MACs for network administrator.
bb Energy efficiency and economic.
bb Nylon cable radius guide and center strength member clamp.
bb Easy Access slide-out and removable Acrylic cover.
bb Slide in cable entry panel with 2 x 25mm diameter holes.
bb Cable fiber track cover provides additional protection and a clean look.
bb Access connector panel with front quick release latch cover.
bb Support OM2, OM3, OM4 multimode fibre links.
bb Support OS1, OS2 singlemode fibre link.
Description
Reference
1U, 24-Port LED Fibre Slide Encl, Unloaded
ACTFM1U224L
8-Port Adaptor Plate, LC Module, Duplex, Single Mode
ACTFA2L8SMZP
8-Port Adaptor Plate, SC Module, Duplex, Single Mode
ACTFA2C8SMZP
8-Port Adaptor Plate, LC Module, Duplex, Multi Mode
ACTFA2L8MMZP
8-Port Adaptor Plate, SC Module, Duplex, Multi Mode
ACTFA2C8MMZP
ACTFM1U224L
ACTFA2C8MMZP
ID-Tracer™ Software
Actassi ID-Tracer™ Software is an intelligent yet user friendly software that enables
easy network management in realtime. There are two versions of software, one for
single panel version and the other one for LAN version. Combined with other Actassi
Products, they are the prefect solution to voice, data and video communications
needs.
Product features
bb User interface for login, data input and event log of network activities.
bb User friendly pull-down menu.
bb Import/Export data in Excel format.
Customer benefits
bb Easy network management of large and dynamic networks in real-time and can be
done anywhere.
bb Real-time security on cabling system and network.
bb Sleep mode function for energy efficiency.
System Requirements
bb Microsoft Windows 2000/ XP/ Vista.
bb Pentium 4 2.0 GHz or above.
bb 256MB RAM.
bb 200MB Hard-drive space.
bb 8x speed CR-ROM drive.
bb USB 2.0 Interface.
bb 10/100M network card.
bb Real-time security alert for patch cord disconnection and unauthorized patching.
bb Automatic sleep mode function for LED on patch panels.
TPFSUSV / TPFSULV
Description
Reference
Actassi ID-Tracer™ Software Pack, Single Panel Version
TPFSUSV
Actassi ID-Tracer™ Software Pack, LAN Version
TPFSULV
Network Connectivity | 04.2012
Actassi | 35
36 | Actassi
04.2012 | Network Connectivity
Actassi Copper solution
Connectors. .............................................................................................................................. 37
Wall Plates..................................................................................................................................42
Copper Cables. ......................................................................................................................43
Copper Patch cords.......................................................................................................... 55
Network Connectivity | 04.2012
Actassi | 37
Actassi connectors
colour-coded
The Actassi RJ45 wire organizers are colour-coded to
make performance identification safer and easier. Both
shielded and unshielded connectors are coded
according to the same system. Connectors are keystone
footprint.
Shielded
The shielded Actassi connectors have two very
time saving and safe features.
Unshielded
Practical eco-box
The unshielded Actassi connectors have a
• Box of connectors for shielded
smooth feel. The design promotes safety and
version.
comfort by its finely contoured shape, edges
• Connectors delivered open,
and elastomer insert.
ready to connect.
• Cardboard package for easy
recycling.
Full compliance with ISO/IEC 11801:2011 Ed2.2
To get your complete network installation classified you need to work with classified
components. That’s why you should choose our solutions. We provide seamless end-toend connectivity through safe, speedy and reliable network installations. We are constantly adjusting and updating our portfolio, and at the same time making sure that they
are fully compatible with older and future solutions.
38 | Actassi
04.2012 | Network Connectivity
Up to 10 Gbps Ethernet
Up to 1 Gbps Ethernet
Cat 6A
Cat 6
Up to 1 Gbps Ethernet
Cat 5e
Every part in our Actassi range is certified to deliver what we
claim they will. The Actassi components are produced in Europe
and Asia Pacific and fully compliant with ISO/IEC 11801:2011
Ed2.2 for Cat 6A, so you can always count on an outstanding
performance and reliability.
Network Connectivity | 04.2012
Actassi | 39
S-One RJ45 Connectors
Actassi Copper
Range
Actassi S-One RJ45 connectors
■■ Performance categories: Cat 6A, 6 and 5e, shielded and unshielded.
■■ Material: Shielded in zamak, unshielded in ABS plastic.
■■ Size: Height 28 mm, width 18 mm, depth 35 mm.
■■ Applicable standards:
– ISO/IEC 11801:2011 Ed2.2, class EA permanent link and channel.
– IEC 60603-7-51 Cat 6A connecting hardware.
– ANSI/TIA-568-C.2 Cat 6A connecting hardware.
■■ One-piece design and U-shaped cable entry.
■■ Tool-less IDC termination.
■■ Earthing (shielded): Metallic, 360° self-adjusting, plus drain wire contact.
■■ Operational temperature range: - 40° C to + 70° C.
■■ Footprint on wiring device: slim InfraPlus.
S-One C6A – Cat 6A
Description
Qty/pack
Reference
RJ45 Connector Cat 6A Unshielded
Black, Dark blue color on top
12
VDIB1772XU12
RJ45 Connector Cat 6A Shielded
Metal, Dark blue color on top
12
VDIB1772XB12
VDIB1772XU12
VDIB1772XB12
S-One C6 – Cat 6
Description
Qty/pack
Reference
RJ45 Connector Cat 6 Unshielded
Black, Light blue color on top
12
VDIB17726U12
RJ45 Connector Cat 6 Shielded
Metal, Light blue color on top
12
VDIB17726B12
VDIB17726U12
VDIB17726B12
S-One C5e – Cat 5e
Description
Qty/pack
Reference
RJ45 Connector Cat 5e Unshielded
Black, Green color on top
12
VDIB17725U12
RJ45 Connector Cat 5e Shielded
Metal, Green color on top
12
VDIB17725B12
VDIB17725U12
40 | Actassi
VDIB17726B12
04.2012 | Network Connectivity
Actassi Copper
Keystone RJ45 and RJ11
Connector
Range
Actassi Keystone RJ45 connectors
■■ Performance categories: Cat 6A, 6 and 5e, shielded and unshielded.
■■ Applicable standards:
– ISO/IEC 11801:2011 Ed2.2, class EA permanent link and channel.
– ANSI/TIA-568-B.2-10 Cat 6A connecting hardware.
– ISO/IEC 11801 Edition 2002, class E and D permanent link and channel.
– ANSI/TIA-568B Series connecting hardware.
■■ Tool-less IDC termination for Shielded Connectors.
■■ Keystone Design.
■■ Supports up to 10G ethernet application (Cat6A / Class Ea).
■■ Operational temperature range: - 40° C to + 70° C
Keystone Cat 6A
Description
Reference
RJ45 Keystone connector Cat 6A unshielded, black with shutter*
VDIB1774XUBK
RJ45 Keystone connector Cat 6A shielded
ACTRJSMTG6ANSSP
RJ45 Keystone connector Cat 6A shielded angled
ACTRJSMA6ANSS
RJ45 Keystone connector Cat 6A, black, unshielded*
ACTRJSMTG6ANSSP
* White colour available on request
Keystone Cat 6
Description
Reference
RJ45 Keystone connector Cat 6 unshielded, black with shutter*
VDIB17746UBK
RJ45 Keystone connector Cat 6 unshielded angled, black*
ACTRJSMA6NSUBK
RJ45 Keystone connector Cat 6 shielded
ACTRJSM6NSSP
RJ45 Keystone connector Cat 6 shielded angled
ACTRJSMA6NSS
RJ45 Keystone connector Cat 6 unshielded, black*
VDIB17766UBK
ACTRJSMA6NSUBK
ACTRJSM6NSSP
VDIB17766UBK
* White colour available on request
Keystone Cat 5e
Description
Reference
RJ45 Keystone connector Cat 5e unshielded, black with shutter*
VDIB17745UBK
RJ45 Keystone connector Cat 5e shielded
ACTRJSM5ENSSP
RJ45 Keystone connector Cat 5e unshielded, white
ACTRJSM5ENSUWE
VDIB1776XUBK
ACTRJSM5ENSUWE
* White colour available on request
ACTRJSM5ENSSP
Keystone Cat 3 (Telephony)
Description
RJ11 Keystone connector Cat 3 unshielded, white
Reference
DCRJ11KYNUWT
Network Connectivity | 04.2012
Actassi | 41
Actassi Copper
Wall Plates
Range
Wall Plates
Product features
■■ Designed to accept RJ45 Keystone modular jacks.
■■ Grid plates comes with standard white colour surround / with self tapping screws.
■■ Protected clear designation label windows.
Customer benefits
■■ Complete with all mounting and fixing hardware.
■■ The front labeling system provides a clear and efficient means of identifying
outlets.
■■ Flame retardant polycarbonate material with finely polished finishing for extra
durability, safety and a smarter look.
■■ Very low profile.
Actassi Wall Plates
Description
Reference
2 Gang Shuttered, Data Outlet (with screws)
DCBRWPS2PSWT
1 Gang Shuttered, Data Outlet (with screws)
DCBRWPS1PSWT
DCBRWPS2PSWT
E2000
Description
Reference
1 Gang Shuttered Keystone Face Plate with Channel & Circuit ID E2031SRJKI
Slot
2 Gang Shuttered Keystone Face Plate with Channel & Circuit ID E2032SRJKI
Slot
E2031SRJKI
Vivace
Description
Reference
2 Gang Data Outlet with integrated shutter
KB32RJK
1 Gang Data Outlet with integrated shutter
KB31RJK
KB32RJK
ZENcelo
Description
Reference
2 Gang Data Outlet with integrated shutter
Silver Bronze finish
E8432RJS-SZ
1 Gang Data Outlet with integrated shutter
White finish
E8431RJS-WE
2 Gang Data Outlet with integrated shutter
White finish
E8432RJS-WE
1 Gang Data Outlet with integrated shutter
Silver Bronze finish
E8431RJS-SZ
E8431RJS-SZ
NEO
Description
Reference
2 Gang Data Outlet
Silver Grey finish
E3032RJK-GS
1 Gang Data Outlet
White finish
E3031RJK-WW
2 Gang Data Outlet
White finish
E3032RJK-WW
1 Gang Data Outlet
Silver Grey finish
E3031RJK-GS
42 | Actassi
E3031RJK-GS
04.2012 | Network Connectivity
Actassi copper cables
Actassi copper cables are available from Category 5 yo Category 7A to satisfy all possible
needs.
Network Connectivity | 04.2012
Actassi | 43
Actassi copper cables
Three ranges that cover all needs
CL-C offer
Standard copper LAN cables for your day-to-day installations, based
on U/UTP and F/UTP cables, from category 5 to category 6A. The CL-C
cables are reliable and well-known, with good performance.
CL-MNC offer
High-end copper LAN cables for performances from category 6 to category 7A 1000 MHz. Exceeding international standards by 3 dB minimum
on NEXT & RL. Full Delta certification for components and permanent
links.
CL-MX offer
Exclusively designed LAN copper cables for category 6A with a patented
single-foil metallic Xfiller, providing high performance and reliable shielded installations. Exceeding international standards by 3 dB minimum on
NEXT & RL. Full Delta certification for components and permanent links.
Actassi offer overview
Performances
Type of shielding
Cat. 5
Cat. 6
Cat6A
CL-MNC**
S/FTP
CL-MNC
CL-MX
F/FTP
CL-MNC
U/FTP
U/UTP
CL-MNC
CL-MNC
CL-C
SF/UTP
F/UTP
Cat7A
CL-C*
CL-C
CL-C
CL-MNC
CL-C*
CL-C*
CL-MNC
CL-C
CL-MNC
* Available with PVC or LSZH jacket material.
** Available with LSZH or LSFRZH (LSZH + improved Fire Resistance) sheath material.
Cable standardisation
X/X TP
TP= Twisted Pair
F= Foil screened, U=Unscreened
F=Foil screened, S=Braid screened, SF=Braid & Foil screened, U=Unscreened
44 | Actassi
04.2012 | Network Connectivity
Actassi copper cables
Some important advantages
CL-MX patented metallic crossfiller
New and patented metallic crossfiller design of the CL-MX LAN copper
cable, providing superior shielding, faster installations and increased
efficiency.
CL-MNC crossfiller with optimized design and
micro-blades
With an optimized design and specific micro-blades, you will have better
performances in NEXT and ELFEXT, and a better resistance to the mechanical constraints.
CL-C, CL-MNC, CL-MX conductivity
For the whole offer, the conducting side of the shield is turned outwards.
Thus, there is no need to turn the shield inside out before applying the
connector to have a good conductivity. You will gain time during installation, there will be no destruction of the shield and you will get very good
shielding.
F2 Construction (Firm & Flexible)
Our patent pending F2 Construction design delivers unrivalled structural
integrity and ensures far superior data transmission performance, more
headroom, higher cable balance and reliability.
Certificates
All LAN cables from Category 6 are certified at a component level by the
independent third-party laboratory. Certificates are regularly updated to be
compliant to the latest and highest international standards.
Network Connectivity | 04.2012
Actassi | 45
Actassi copper cables
Performances
Frequency (MHz)
250
Attenuation (dB)*
33
NEXT (dB)*
500
33
33
39.3 42.3 59.3
1000
45.3
45.3
61.9
34.8
54.8
60.4
ACR-F (dB)*
20
23
20
14
24
35.3
Propagation speed (%c)
66
66
78
70
70
78
Cat 6
CL-C U/UTP
CL-MNC U/UTP
CL-C F/UTP
CL-MNC U/FTP
Cat 6A
CL-C U/UTP
CL-C F/UTP
CL-MNC U/UTP
CL-MNC F/UTP
CL-MNC U/FTP
CL-MNC F/FTP
CL-MX F/FTP
Cat 7A
CL-MNC F/FTP
CL-MNC S/FTP
CL-MNC S/FTP
*Nominal characteristics given for 100 meters at maximum frequencies:
250 MHz for category 6, 500 MHz for category 6A , 1000 MHz for category 7A .
46 | Actassi
04.2012 | Network Connectivity
Actassi CL-MNC F2 cables
The efficient, reliable, invisible hero in
your office
Structured cabling is the vital link between all the components in your computer network. Poor installation can cause severe bending and stress of cabling, often resulting
in system failure. Our “Tough” cabling incorporates a patent-pending F2 construction
that guarantees performance under widely varied installation quality. 4-twisted pairs of
high-purity solid copper wires optimize flexibility, ease of installation and long-range
data transmission efficiency. Durable PVC protective jacket ensures longer product life
by keeping cables tangle-free and enhancing tearresistance. High-density Polyethylene
insulation provides better protection and optimum resistance to extreme temperatures
and climactic conditions.
CL-MNC F2 Cat 6 UTP Cable Transmission
Performance Table
Freq
(MHz)
Superior headroom
and bandwidth.
NEXT
(dB)
PS NEXT
(dB)
EL FEXT
(dB)
Attenuation
(dB/100m)
RL
(dB)
1.00
74.30
99.01
72.30
95.02
67.80
90.75
2.02
1.63
20.00
28.82
4.00
65.27
88.22
63.27
86.97
55.76
81.02
3.78
3.37
23.01
34.37
10.00
59.30
80.18
57.30
77.80
47.80
74.32
5.95
5.41
25.00
36.30
16.00
56.24
83.57
54.24
73.94
43.72
75.87
7.55
6.88
25.00
34.81
20.00
54.78
72.49
52.78
72.02
41.78
84.65
8.47
7.71
25.00
38.85
31.25
51.88
73.94
49.88
73.38
37.90
71.38
10.67
9.69
23.64
40.30
62.50
47.36
68.33
45.36
65.40
31.88
61.96
15.38
13.84
21.54
35.15
100.00
44.30
66.38
42.30
64.34
27.80
60.16
19.80
17.65
20.11
39.92
200.00
39.78
68.63
37.78
65.18
21.78
58.57
28.98
25.34
18.00
38.49
250.00
38.33
66.64
36.33
65.15
19.84
59.24
32.85
28.49
17.32
32.92
* Values in Grey refer to the requirement of TIA/EIA & ISO/IEC Standards
* Values in Green refer to Typical Actassi F2 Cat6 UTP cable performance, tested based on 105
meters.
Network Connectivity | 04.2012
Actassi | 47
Actassi CL-MX cables
3 times improved performance with
1 new metallic crossfiller
Visit: http://tv.schneiderelectric.com, to download the Actassi CL-MX
cable video
The patented crossfiller brings 3x shielding and superior Electro Magnetic Compa- tibility (EMC). Thanks to the unique design, the EMC performance is among the best
in the market with performances exceeding the standard requirements for shielded
cables with braid (S/FTP). The metallic crossfiller ensures an improved transfer impedance to fit requirements of sensitive areas where data transmission is critical. Best
of all, Actassi CL-MX cables require less operations to be installed.
New!
Patented metallic crossfiller for superior EMC and
reduced installation time
Drain wire
Outer sheath in LSZH
or LSFRZH
1
Insulated AWG 23 copper
conductors
3x shielding
1 Inner cross
2 Outer shielding
2
Superior headroom and
bandwidth, exceeding
international and local
standards.
3 Double outer shielding
3
Designed for improved EMC
High-speed transmission protocols beyond 10
Transfer Impedance
Gbit/s highlight ANEXT sensitivity and noise
mΩ
Ω /m
10000
immunity as key performance factors for
efficient, secure and robust installations. The
Grade 2
1000
single-foil structure of the metallic crossfiller acts
like a triple screen protection around the copper
100
twisted pairs. This specific design enhances
EMC performances to reach grade 1 on the
CL-MX 6A
10
S/FTP 7A
transfer impedance parameter, which is better
than a shielded design with braid.
48 | Actassi
Grade 1
U/FTP 6A
1
0,1
1
F(MHz)
04.2012 | Network Connectivity
10
100
Better link performance
With Actassi CL-MX the installations are easy
and safe. According to the international standards for shielded LAN cables, the use of CL-MX
cables will require less installation operations:
- No separation distance to power cabling*
- No ANEXT field testing
*EN 50174-2 to be referred
The fire properties
are documented by
standardized methods
according to IEC
60332-1,
60332-3C,
60754-1 and
60754-2.
Improved safety in case of fire
Actassi CL-MX is available in two versions, the
flame retardant LSZH and the fire retardant
LSFRZH. Both are halogen-free. In case of fire,
the result of using CL-MX is the reduction of the
emissions of opaque smoke and acid gases.
Thus, it helps reducing damages to equipment
and allows people to escape from the building
more easily.
3
Three times faster
installation with
Actassi CL-MX
Less cutting with Actassi CL-MX
Instead of separate wrapped-in foil pairs (like in
traditional F/FTP or F/UTP cables), the Actassi
CL-MX new crossfiller is wrapped in one single
foil. This means less cutting and improved
quality of the cable preparation. No need to pay
Use the cable stripper Cut the one single
tool and cut the outer foil metallic crossfiller
sheath.
and remove it with
a simple grip.
Your CL-MX is ready
to connect.
attention to cutting the foils at exactly the same
level, or to the length of the F/UTP plastic cross.
Why traditional F/FTP cables are 3 times slower to install
Prepare your
tools.
Use the cable
stripper tool
and cut the
outer sheath.
Cut the outer
foil.
Network Connectivity | 04.2012
Remove the
foil.
Separate all
pairs and the
drain wire.
Cut and remove the
foil of the
first pair.
Cut and remove the
foil of the
second pair.
Cut and remove the
foil of the
third pair.
Cut and remove the
foil of the
fourth pair.
Actassi | 49
Actassi Copper
Copper LAN cables
Range
Category 3
CL-C Cat 3 UTP Multi pair cable
ACT100P3ULS3RGY
Specifications
bb 100 ohms, 16 MHz, AWG24
bb Available in 25, 50 and 100 pairs
bb For backbone telephony application
bb Grey
Performances
bb Compliant with ANSI/TIA/EIA-568B Category 3 Standard
bb IEC LSZH fire retardant tested
bb Suitable for IEEE 802.3 10 Base-T or telephony applications
Type
Diameter
Sheath
Length
Ref. No
25 pair cable
11 mm
CM
305
ACT25P3UCM3RGY
25 pair cable
11 mm
LSZH
305
ACT25P3ULS3RGY
50 pair cable
15.8 mm
CM
305
ACT50P3UCM3RGY
50 pair cable
15.8 mm
LSZH
305
ACT50P3ULS3RGY
100 pair cable
22 mm
CM
305
ACT100P3UCM3RGY
100 pair cable
22 mm
LSZH
305
ACT100P3ULS3RGY
Category 5e
CL-C Cat 5e UTP Multi pair cable, Class D
ACT25P5EUCM3RGY
Specifications
bb 100 ohms, 100 MHz, AWG24, 25 twisted pairs
bb PE Insulation of conductors
bb Ideal for IP telephony netwoks and broadband
Performances
bb Compliant with Enhanced Category 5 Standard
Type
Diameter
Sheath
Length
Ref. No
25 pair cable
12.5 mm
CM
305
ACT25P5EUCM3RGY
25 pair cable
12.5 mm
LSZH
305
ACT25P5EULS3RGY
CL-C Cat 5e U/UTP, Class D
ACT4P5EUCM3RBBU
Specifications
bb 100 ohms, certified to 100MHz, 24 AWG, and supports applications such as
155Mb/s ATM, 622Mb/s ATM and IEEE 802.3 1000 Base-T (Gigabit Ethernet)
standard, using parallel transmission technology.
bb Blue
Performances
bb Complies with Category 5e ANSI/TIA/EIA-568B & ISO/IEC 11801 Standard
bb Supports transmission of digital and analogue voice, data and video signal
bb Supports Gigabit Ethernet (1000 Base-T)
NEXT
Nominal
Standard IEC
100 MHz
35.3 dB
≥ 35.3 dB
Use
bb Cabling for Voice, data, images horizontal and vertical category 5 / Class D. High rates
transmission: Gigabit Ethernet, 10/100base T.
50 | Actassi
Type
Diameter
Sheath
Lenght
Ref No.
4 pair cable
4.9 mm
CM
305
ACT4P5EUCM3RBBU
4 pair cable
4.9 mm
LSZH
305
ACT4P5EULS3RBBU
04.2012 | Network Connectivity
Actassi Copper
Copper LAN cables
Range
CL-C Cat 5e F/UTP, Class D
VDIC135118
Specifications
bb 100 Ohms, 155 MHz, AWG24, 4 pairs or 2x4 twisted pairs without screen.
Compatible with PoE standards (Power over Ethernet), IEEE 802.3AF Power Over
Ethernet: 15w/13w and PoEP (Power over Ethernet Plus), IEEE 802.3AT Power
Over Ethernet Plus 30w/25w which allow to supply equipments (IP phone, camera,
WIFI hotspot…) until 13W or 25W
Performances
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2
standards
NEXT
Nominal
Standard IEC
100 MHz
35.3 dB
≥ 35.3 dB
Use
bb Network cabling systems for category 5 voice & data applications. Data rates transmission:
Gigabit Ethernet, 10/100 BaseT.
Type
Diameter
Sheath
Cond/
Length
Ref. No
4 pair cable
6.5 mm
LSZH
305 m
VDIC135118
PVC
305 m
VDIC135118P
Category 6
CL-C Cat 6 U/UTP, Class E
Specifications
bb 100 ohms, 250 MHz, AWG23, 4 pairs without screen
bb 23AWG conductors
bb UL Listed CM Fire rated
ACT4P6UCM3RBBU
Performances
bb Complies with Category 6 ANSI/TIA/EIA-568 & ISO/IEC 11801 Standard
NEXT
Nominal
Standard IEC
250 MHz
38.3 dB
> 39.3 dB
Use
bb Supports transmission of digital and analogue voice, data and video signal
bb Supports Gigabit Ethernet (1000 Base-T)
Type
Diameter
Sheath
Length
Ref. No
4 pair cable
6 mm
LSZH
305 m
ACT4P6ULS3RBWE
4 pair cable
6 mm
CM
305 m
ACT4P6UCM3RBBU
CL-MNC Cat 6 U/UTP F2 , Class E
Specifications
bb 100 ohms, 250 MHz, AWG23
bb F2 construction avoiding severe bending and stress of cabling
bb UL listed, CM fire rated with high density Polyethylene insulation,
bb Color: Blue
bb Description on page 47
2D4P6T2PS3RBU
Network Connectivity | 04.2012
Use
bb F2 cable provide superior headroom for most robust network & applications e.g.
Gigabit Ethernet, broadband video, 3D imaging and other multimedia applications
bb F2 cable minimizes additional workload for cable installation, termination, and
re-work
bb F2 cable minimizes additional workload for cable installation, termination, and
re-work
Type
Diameter
Sheath
Length
Ref. No
4 pair cable
6.5 mm
CM
305 m
2D4P6T2PS3RBU
Actassi | 51
Actassi Copper
Copper LAN cables
Range
CL-MNC Cat 6 U/FTP, Class E
Specifications
bb 100 ohms, 300 MHz, AWG23, 4 pairs or 2x4 pair with individual screens.
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet
Plus) which allow to supply equipments (IP phone, camera, WIFI hotspot…) until
13W or 25W
VDIC616218
Performances
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2,
EN50288-5-1 standards
NEXT
Nominal
Standard IEC
300 MHz
44 dB
> 39.3 dB
Use
bb Network cabling systems for category 6 voice & data applications. Data rates transmission:
Gigabit Ethernet, 10/100 BaseT.
Type
Diameter
Sheath
Length
Ref. No
4 pair cable
7.5 mm
LSZH
500 m
VDIC616218
CL-C Cat 6 SF/UTP, Class E
Specifications
bb 100 ohms, 250 MHz, AWG23, 4 pairs with overall screen and metallic braid
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) which
allow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25W
VDIC176218
Performances
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and EN50288-5-1
standards
NEXT
Nominal
Standard IEC
250 MHz
39.3 dB
> 34.8 dB
Use
bb Network cabling systems for category 6 voice & data applications. Data rates transmission:
Gigabit Ethernet, 10/100 BaseT.
Type
Diameter
Sheath
Lenght Ref No.
4 pair cable
7.9 mm
LSZH
500 m
VDIC176218
Category 6A
CL-C Cat 6A U/UTP, Class EA
bb 100 ohms, 500 MHz, AWG23, 4 pairs (0.59 mm)
bb Centre filler to maintain pair twisting and optimum NEXT and ELFEXT performance
bb Newly design Jacket to optimize the ANEXT performance
Performances
ACTTG4P6AUCM3RBU
bb Complies with TIA/EIA-568-B.2-10 Category 6A and ISO/IEC 11801Class Ea Standards
NEXT
Nominal
Standard IEC
500 MHz
33.8 dB
≥ 34.8 dB
Use
bb Support 10G Base-T, 1000 Base-T and 1000 Base-TX LANs and broadband
video applications
Type
Diameter Sheath Lenght Ref No.
52 | Actassi
4 pair cable
8.5 mm
CM
305 m
ACTTG4P6AUCM3RBU
4 pair cable
8.5 mm
LSZH
305 m
ACTTG4P6AULS3RWE
04.2012 | Network Connectivity
Actassi Copper
Copper LAN cables
Range
CL-C Cat 6A F/UTP, Class EA
Specifications
bb 100 ohms, 500 MHz, AWG23, 4 pairs or 2x4 pairs with overall screen.
bb Cross filter to organize the pairs.
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) which
allow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25W
VDIC13X218
Performances
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and Draft EN502885-1 standards
NEXT
Nominal
Standard IEC
500 MHz
34.8 dB
> 34.8 dB
Use
bb Network cabling systems for category 6A voice & data applications. High data rates
transmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.
Type
Weight
Diameter
Sheath
Cond/Length Ref. No
4 pair cable
59 kg/km
7.4 mm
LSZH
500 m
VDIC13X218
1000 m
VDIC13X318
500 m
VDIC13X228
2x4 pair cable
121 kg/km
7.4x15.8 mm LSZH
CL-MNC Cat 6A U/FTP, Class EA
Specifications
bb 100 ohms, 550 MHz, AWG23, 4 pairs and 2x4 pairs with individual screen
bb NVP = 80%
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) which
allow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25W
Performances
VDIC62X218
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and Draft
EN5028810-1 standards
NEXT
Nominal
Standard IEC
550 MHz
67dB
> 34.8 dB
Use
bb Network cabling systems for category 6A voice & data applications. High data rates
transmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.
Type
Weight
Diameter
Sheath
Cond/Length Ref. No
4 pair cable
57 kg/km
8.3 mm
LSZH
500 m
VDIC62X218
CL-MNC Cat 6A F/FTP , Class EA
Specifications
bb 100 ohms, 500 MHz, AWG23, 4 pairs and 2x4 pairs with individual screen and overall screen
bb NVP = 80%
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) which
allow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25W
Performances
VDIC64X218
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and Draft
EN5028810-1 standards
NEXT
Nominal
Standard IEC
500 MHz
67dB
> 34.8 dB
Use
bb Network cabling systems for category 6A voice & data applications. High data rates
transmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.
Network Connectivity | 04.2012
Type
Weight
Diameter
Sheath
Cond/Length Ref. No
4 pair cable
57 kg/km
8.3 mm
LSZH
500 m
1000 m
VDIC64X218
VDIC64X318
2x4 pair cable
114 kg/km
7.9x16.8 mm LSZH
500 m
VDIC64X228
Actassi | 53
Actassi Copper
Copper LAN cables
Range
CL-MX Category 6A Copper LAN cables
CL-MNC Cat 6A F/FTP
Specifications
VDIC68X218F01
bb 100 ohms, 550 MHz, AWG23, 4 pairs and 2x4 pairs with patented single-foil metallic
crossfiller design
bb Superior EMC performances: Grade 1 Transfer Impedance
bb Quick and simple twin removal actions for the sheath and the shield
bb NVP = 82%
bb Fire retardant properties for LSFRZH version according to IEC60332-3C, NFC32070 2.1,
NFC32070 2.2
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) which
allow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25W
Standards
bb Compliant to EN50173-1, ISO/IEC11801:2011 Ed2.2, IEC61156-5 Ed2 and Draft EN5028810-1 standards
NEXT
Nominal
Standard IEC
550 MHz
67 dB
> 34.8 dB
Use
bb Network cabling systems for category 6A voice & data applications. High data rates
transmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.
Type
Weight
Diameter
Sheath
Cond/Length Ref. No
4 pair cable
55 kg/km
7.8 mm
LSZH
500 m
VDIC68X318
4 pair cable
65 kg/km
8.2 mm
LSFRZH
500 m
VDIC68X218F01
Also available on dual 2 x 4 pairs on request
Category 7A Copper
CL-MNC Cat 7A F/FTP
Specifications
bb 100 ohms, 1000 MHz, AWG23, 4 pairs and 2x4 pairs with individual screen and overall
screen, PiMF construction
bb NVP = 80%
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) which
allow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25W
VDIC648318
Performances
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and Draft
EN5028810-1 standards
NEXT
Nominal
Standard IEC
1000 MHz
60.4 dB
> 60.4 dB
Use
bb Network cabling systems for category 7A voice & data applications. High data rates
transmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.
Type
Weight
Diameter
Sheath
Cond/Length Ref. No
4 pair cable
57 kg/km
7.9 mm
LSZH
1000 m
VDIC648318
2x4 pair cable
106 kg/km
7.9x16.8 mm LSZH
500 m
VDIC648228
CL-MNC Cat 7A S/FTP
Specifications
VDIC658318F01
bb 100 ohms, 1000 MHz, AWG23, 4 pairs and 2x4 pairs with individual screen and metallicbraid,
PiMF construction.
bb NVP = 80%
bb Compatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) which
allow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25W
bb Fire retardant properties according to IEC60332-3C, NFC32070 2.1, NFC32070 2.2
Performances
bb Compliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and Draft
EN50288-10-1 standards
NEXT
Nominal
Standard IEC
1000 MHz
60.4 dB
> 60.4 dB
Use
bb Network cabling systems for category 7A voice & data applications. High data rates
transmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.
54 | Actassi
Type
Weight
Diameter
Sheath
Cond/Length Ref. No
4 pair cable
57 kg/km
7.9 mm
LSFRZH
1000 m
VDIC658318F01
2x4 pair cable
114 kg/km
7.9x16.8 mm LSFRZH
500 m
VDIC658228F01
04.2012 | Network Connectivity
Actassi copper patch cords
Actassi copper patch cords ensure a reliable transmission in data networks. They are
available in several lenghts, from Cat 5e to Cat 6A performances, covering both shielded and
unshielded needs.
All patch cords are compliant with ISO/IEC 11801 Ed2.2. They are all third party certified and also compliant to EN50173ed.3. , EIA/TIA 568 - C.2, IEC 61935-2. Actassi copper
patchcords provide safe plug & play with a high quality thanks to the performances, the
LSZH sheath also available and the warranties.
All patch cords are individually tested and packed.
Cat 6 and above have an option of couloured clips for easy identification.
Coloured clips for easy
identification
Flexible plug-clip to secure
a reliable connection.
When you hear the
CLICK, you know that
everything is ok
Snag-free boot protects the
plug-clip from breakage
Gold-plated contact pins
for maximum performance
LSZH sheath also available.
Material with low smoke
emissions and non-toxic
gases in case of fire
For availing international end to end system performance warranty, it is mandatory to use Schneider Electric Actassi patch cords.
Network Connectivity | 04.2012
Actassi | 55
Actassi Copper
Copper patch cords
Range
Patch cord U/UTP category 5e
Specifications
bb 100 MHz, outer sheath LSZH.
Performances
bb Fully compliant to AS/NZS 3080:2003 Class D and Category 5e Standards.
bb Fully moulded boot and insert not only ensures pair integrity but also provides an enhanced strain relief, especially during
installations or moves.
Type
Colour of sheath
Length (m)
Ref. No
4 pair
Grey
1.0
2.0
3.0
5.0
ACTPC5EUBLS10GY
ACTPC5EUBLS20GY
ACTPC5EUBLS30GY
ACTPC5EUBLS50GY
Specifications
bb 100MHZ, outer sheath PVC.
Performances
bb Fully compliant to AS/NZS 3080:2003 Class D and Category 5e Standards.
bb Fully moulded boot and insert not only ensures pair integrity but also provides an enhanced strain relief, especially during
installations or moves.
ACTPC5EUBCM10BU
Type
Colour of sheath
Length (m)
Ref. No
4 pair
Blue
1.0
2.0
3.0
5.0
ACTPC5EUBCM10BU
ACTPC5EUBCM20BU
ACTPC5EUBCM30BU
ACTPC5EUBCM50BU
Patch cord F/UTP category 5e
Specifications
bb 155 MHz, outer sheath LSZH.
bb Red and Green couloured clips are included by default. Other couloured clips available (References p. 57).
Performances
bb Complaint with ISO/IEC 11801 Ed 2.2.
bb Full latest standards Delta Certified: EN50173 ed.3, EIA/TIA - C.2, IEC 61935-2.
Type
Colour of sheath
Length (m)
Ref. No
4 pair
Grey
1.0
2.0
3.0
5.0
10.0
VDIP184546010
VDIP184546020
VDIP184546030
VDIP184546050
VDIP184546100
VDIP184546010
Patch cord U/UTP category 6
Specifications
bb 300 MHz, outer sheath LSZH.
Performances
bb Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 Edition 2 2002 and ANSI/TIA/EIA-568-B Series Connecting Hardware
Standards.
bb Backward Compatible with Cat 5e products.
Type
Colour of sheath
Length (m)
Ref. No
4 pair
Grey
1.0
2.0
3.0
5.0
ACTPC6UBLS10GY
ACTPC6UBLS20G
ACTPC6UBLS30GY
ACTPC6UBLS50GY
Specifications
bb 300MHZ, outer sheath PVC.
Performances
bb Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 Edition 2 2002 and ANSI/TIA/EIA-568-B Series Connecting Hardware
Standards.
bb Backward Compatible with Cat 5e products.
ACTPC6UBCM05BU
56 | Actassi
Type
Colour of sheath
Length (m)
Ref. No
4 pair
Blue
0.5
1.0
2.0
3.0
5.0
ACTPC6UBCM05BU
ACTPC6UBCM10BU
ACTPC6UBCM20BU
ACTPC6UBCM30BU
ACTPC6UBCM50BU
04.2012 | Network Connectivity
Actassi Copper
Copper patch cords
Range
Patch cord F/UTP category 6
Specifications
bb 250 MHz, outer sheath LSZH.
bb Red and Green couloured clips are included by default. Other couloured clips available (References below).
Performances
bb Complaint with ISO/IEC 11801 Ed 2.2.
bb Full latest standards Delta Certified: EN50173 ed.3, EIA/TIA - C.2, IEC 61935-2.
Type
Colour of sheath
Length (m)
Ref. No
4 pair
Grey
1.0
2.0
3.0
5.0
10.0
VDIP184646010
VDIP184646020
VDIP184646030
VDIP184646050
VDIP184646100
VDIP184646010
Patch cord Secured U/UTP category 6 / F2
Specifications
bb 300MHZ, outer sheath PVC.
bb Set of coloured clips included.
bb Key included.
Performances
bb Fully compliant to TIA/EIA 568B2-1 Category 6 and ISO/IEC 11801 Class E Standards.
bb F² construction cable provides better performance in RL and NEXT.
bb UL Listed CM fire rated.
bb Option of one to two end secure patch cord
Type
Colour of sheath
Length (m)
Ref. No
4 pair (1 end secure)
White
1.0
2.0
3.0
5.0
ACTPCC6UBCM1E10WE
ACTPCC6UBCM1E20WE
ACTPCC6UBCM1E30WE
ACTPCC6UBCM1E50WE
4 pair (2 end secure)
White
1.0
2.0
3.0
5.0
ACTPCC6UBCM2E10WE
ACTPCC6UBCM2E20WE
ACTPCC6UBCM2E30WE
ACTPCC6UBCM2E50WE
ACTPCC6UBCM1E10WE
Patch cord U/UTP category 6 / F2
Specifications
bb 300MHZ, outer sheath PVC.
Performances
bb Fully compliant to TIA/EIA 568B2-1 Category 6 and ISO/IEC 11801 Class E Standards.
bb F² construction cable provides better performance in RL and NEXT.
bb UL Listed CM fire rated.
Type
Colour of sheath
Length (m)
Ref. No
4 pair
White
1.0
2.0
3.0
5.0
RJ6T2/10PL
RJ6T2/20PL
RJ6T2/30PL
RJ6T2/50PL
RJ6T2/10PL
Patch cord S/FTP category 6A
Specifications
bb 550 MHz, outer sheath LSZH.
bb Red and Green couloured clips are included by default. Other couloured clips available (References p. 50).
Type
Colour of sheath
Length (m)
Ref. No
4 pair
Grey
1.0
2.0
3.0
5.0
10.0
VDIP185X46010
VDIP185X46020
VDIP185X46030
VDIP185X46050
VDIP185X46100
Description
Packaging
Colour
Ref. No
Coloured clips
10
Blue
VDIP1811
Coloured clips
10
Yellow
VDIP1812
VDIP185X46010
Coloured clips
VDIP1811 / VDIP1812
Network Connectivity | 04.2012
Actassi | 57
58 | Actassi
04.2012 | Network Connectivity
Actassi Fibre solution
FL-C Fibre Optic Cables...............................................................................................64
FL-C Fibre Optic Patch cords . ................................................................................ 73
FL-C Fibre Optic Connectors and Toolkits.................................................. 78
FL-C Fibre Optic Pigtails ............................................................................................. 79
19-C Fibre Optic Panels, Adapters and
Accessories. ............................................................................................................................80
Network Connectivity | 04.2012
Actassi | 59
Actassi fibre optic cables.
Part of a total solution.
Actassi Fibre LAN cables are an important part of our total Network Connectivity solution
that also includes panels, enclosures, connectors etc. All Network Connectivity products
are specially designed to work perfectly together with complementary Schneider Electric
products like trunking, poles, boxes and wiring devices in order to deliver true and seamless end-to-end connectivity.
4
7
6
4
3
2
1
8
5
The Fibre LAN offer covers needs for all kinds of
1
Enclosures
Campus (between buildings), Building back-
2
Panels for data, fibre optic and telecom
bones (between technical rooms) and Distribu-
3
Fibre LAN backbone cables
tion (from technical rooms to workstations).
4
Copper LAN and Fibre LAN distribution cables
5
Fibre LAN campus cables
6
Fibre data sockets in trunking
7
Fibre data sockets in posts
8
Fibre data sockets in floor boxes
LAN installations:
60 | Actassi
Actassi network connectivity
04.2012 | Network Connectivity
A complete product portfolio for
LAN installations
The Fibre LAN range offers a complete product portfolio for LAN installations. Providing
the best support for high-speed data networks the fibre LAN range complements our Copper LAN offer. Optic cables, patchcords, connectors, tools and accessories are part of the
Fibre LAN offer.
The Actassi 19” fibre optic panel is one of the most
installation and user-friendly panels on the market.
Quick-fix, sliding function, integrated guiding panel,
excellent protection and clear marking, coiling wheels
and much more.
Fibre optic technology offers several
advantages
• Very high data rates
• Immune to crosstalks
• Flexible, reliable net• Safety in sensitive
works
environments (no spark)
• Very low & constant
• Confidentiality
attenuation
• No corrosion
• Long distances
• Simplified field testing
(up to 40 km)
• High port density
• No EMC rules
• No grounding issue
Network Connectivity | 04.2012
Actassi | 61
Fibre optic performances
Actassi Fibre LAN is a reliable and robust solution for high-speed data networks.
The range includes both OM1, OM2 and OM3, but also OM4 and OS2 following the latest
standards.
Fibre LAN performances in brief:
• Supports all kinds of network applications like 10 Gigabit/s Ethernet, Gigabit/s
Ethernet, FastEthernet, Ethernet.
• Guarantees the compatibility with LAN active components.
• Compliant with international LAN optic transmission standards
• Available in multimode and single-mode, adapted to all LAN active equipments using LED, VCSEL and LASER technologies.
Two types of fibres:
Multimode and Single-mode
Multimode (OM1,OM2, OM3, OM4)
Single-mode (OS1/OS2)
P119618
■■ Single-mode optic fibres performances:
OS1/OS2 9/125.Meeting the markets needs for all single-mode applications.
■■ Low Water Peak and PMD. Optimized to decrease
the signal attenuation between 1260 to 1625nm
allowing for multiplexing (modern optical transmission technologies like DWDM).
P119619
■■ 4 ranges of multimode optic fibres performances:
OM1 62,5/125, OM2 50/125, OM3 50/125 and OM4
50/125. Meeting the markets needs up to 10
Gigabit/s.
■■ OM4 50/125 performance. Meeting the markets
needs for speeds beyond 40 Gigabit/s and 100
Gigabit/s.
■■ High bandwidth. Optimized to increase the
maximum optic link distance at both operating
wavelengths (850nm and 1300nm).
■■ Low attenuation. Optimized to decrease the signal
attenuation at both operating wavelengths
(850nm and 1300nm).
Attenuation
Full Spectrum Fibre
850
1300
1550
nm
Wave length
62 | Actassi
04.2012 | Network Connectivity
OS2
10 Gigabits
max 10 km
3500/500
Supports all kinds of
network applications
1500/500
OM4
10 Gigabits
max 550 m
500/500
OM3
10 Gigabits
max 300 m
OM2
10 Gigabits
max 82 m
OM1
10 Gigabits
max 33 m
Multimode fibre
Applications
Overfilled Bandwidth
(MHz.km)
Singlemode fibre
Wavelength
OM1 62,5/125 µm
OM2 50/125 µm
OM3 50/125 µm
OM4 50/125 µm
OS2 9/125 µm
OFL 850/1300 nm
200/500
500/500
1500/500
3500/500
-
-
-
Fibre channel:
4Gbit/s(FC4)
VCSEL 850 nm
8Gbit/s(FC8)
VCSEL 850 nm
100 Gbit/s 16Gbit/s (FC16)
VCSEL 850 nm
40 Gbit/s IEEE 802.3ba
10 Gbit/s (10GBASE-SR/SW)
VCSEL 850 nm
-
400 m
10 km
200 m
10 km
130 m
-
-
100 m**
-
-
100 m*
150 m*
10 km
33 m
150 m **
10 km
82 m
300 m
550 m
-
10 Gbit/s (10GBASE-LX4)
LASER 1300 nm
300 m
300 m
300 m
-
10 Gbit/s (10GBASE-LRM)
LASER WDM 1300 nm
220 m
220 m
220 m
-
10 Gbit/s (10GBASE-LR/LW)
LASER 1310 nm
-
-
-
10 km
10 Gbit/s (10GBASE-ER/EW)
LASER 1550 nm
-
-
-
40 km
1 Gbit/s (1000BASE-SX)
VCSEL 850 nm
275 m
550 m
1000 m
1100 m
-
1 Gbit/s (1000BASE-LX)
LASER 1300/1310 nm
550 m
550 m
550 m
600 m
5 km
100 Mbit/s (100BASE-SX)
VCSEL 850 nm
300 m
300 m
300 m
300 m
-
100 Mbit/s (100BASE-LX)
LASER 1300/1310 nm
2000 m
2000 m
2000 m
2000 m
>20 km
* Request a minimum of 8 fibres cores for 4x10 Gbit/s paralel optic
** Request a minimum of 20 fibres cores for 10x10 Gbit/s paralel optic
Network Connectivity | 04.2012
Actassi | 63
Actassi fibre optic cables
Actassi Fibre LAN range is adapted to the familiar ways of installing optic connectors
and pigtails (SC, LC, ST). The range is available under 2 different structures: Tight buffered and Loose tube to be used for direct connector termination and for splicing respectively. Both structures are suitable for indoor and specific outdoor installations.
Loose tube
Tight buffered
6
7
5
4
2
2
3
3
8
1
1
8
1
Robust sheath
Tensile strength
Reinforces the tensile
strength of the cable.
Robustness
High maximum pulling force
and crush resistance of the
cable during installation.
UV resistance
Resistance to UV
degregation.
Colours
Distinct colours to identify
strategic cables and prevent
mistakenly cutting the cable.
4
Innovative design
Innovative design of dual
loose tube structure to
help simplify the installation.
5
Gel
Provides a protective barrier
against longitudinall water
ingression while guaranteeing cable perfomance.
Coating
6 250 µm coating
7 900 µm coating
8
Water swellable
elements
2
Provide a protective barrier
against longitudinally water
ingression while guaranteeing cable perfomance.
3
100% glass yarns
Reinforcing the tensile
strength of the cable. Acting
as rodent retardant.
64 | Actassi
Compact for
improved bending
radius
The compact design of the
cables gives several benefits:
•Reduced bending radii:
10 x diameter for Tight
buffered and 60 mm for
Loose tube cables
•Reduced diameter and
increased installation space
Packaging
Colour code
Packaging
adapted to our
customers requests (convenient small sized drums or
cut to length).
Fibre n°1 to n°12 according to the following colours.
1
Blue
2
Orange
3
Green
4
Brown
5
Grey
6
White
7
Red
8
Black
9
Yellow
10
Violet
11
Rose
12
Aqua
Fibre n°13 to n°24: idem + transparent
04.2012 | Network Connectivity
Environment-friendly
LSZH
LSZH (Low Smoke Zero Halogen) sheath according to test methods
IEC 61034 (smoke density), IEC 60754-1 (gas toxicity), IEC 60754-2
(gas corrosiveness) for Tight buffered and Loose tube cables.
Flame retardant
Flame retardant (self extinguishing) according to IEC 60332-1 for
Tight buffered and Loose tube cables.
Fire retardant
Fire retardant (no fire propagation along the cable) according to
IEC 60332-3C for Tight buffered cables.
RoHS and REACH
RoHS compliance according to UE directive.
REACH compliance.
PeP available for the range.
Actassi Fibre
FL-C Fibre optic cables
Range Loose tube
FL-C Loose tube Fibre optic cables
Specifications
■■ Compact and universal cables suitable for indoor and specific outdoor
installations:
– Low Smoke Zero Halogen (LSZH) green coloured external sheath
– UV resistant
– dielectric
– high tensile strength
– rodent retardant
– longitudinally watertight
■■ Maximum pulling force: 1500 Newton (1800 Newton for 24FO)
– longitudinally watertight
■■ Rodent protection:
■■ Minimum bending radius: OD x 10 (ex: 62mm for 6,2mm OD)
■■ Ambiant air temperature (minimum & maximum)
– for installation: -5° … +50°C
– for operation: -20°… +70°
– for storage: -40° … +70°
■■ Loose tube gel-filled cable construction with 250 µm coating available in unitube
structure for 4, 6, 8 and 12 fibres and bitube structure for 24 fibres.
■■ Flame retardant according to IEC 60 332-1, EN 50 265 2.1, NFC 32 070 2.1
(Category C2)
Performances
■■ OM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 and
ISO/IEC 11801:2011 Ed2.2 OM2.
■■ OM3 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.2 and
ISO/IEC 11801:2011 Ed2.2 OM3.
■■ OM4 50/125 compliant with IEC 60793-2-10 Type A1a.3,
ISO/IEC 11801:2011 Ed2.2 OM4.
■■ OS1/OS2 9/125 compliant with ITU G.652.D, IEC 60793-2-50 Type B1.3,
ISO/IEC 11801:2011 Ed2.2 OS2.
■■ Cable mechanical characteristics tested according to IEC 60794-1
Use
■■ High data rate fibre optic backbones for building and campus
■■ Suitable for splicing termination: installation with pigtails by fusion or mechanical
splices.
OM2 50/125 µm
Type
Length
Diameter
Ref. No
4 fibres OM2 50/125, Loose tube,
Up to 10Gbps ethernet supported
2100 m
6,2mm
VDIC52204L
6 fibres, OM2 50/125, Loose tube,
Up to 10Gbps ethernet supported
525 m
2100 m
6,2mm
VDIC42206L
VDIC52206L
8 fibres, OM2 50/125, Loose tube,
Up to 10Gbps ethernet supported
2100 m
6,2mm
VDIC52208L
12 fibres, OM2 50/125, Loose tube,
Up to 10Gbps ethernet supported
525 m
2100 m
6,2mm
VDIC42212L
VDIC52212L
24 fibres, OM2 50/125, Loose tube,
Up to 10Gbps ethernet supported
525 m
2100 m
6,2mm
VDIC42224L
VDIC52224L
Optic cable Indoor/outdoor OM2 50/125 µm multimode fibres, green overall jacket.
VDIC52204L
VDIC52206L
VDIC52212L
VDIC52224L
VDIC52224L
66 | Actassi
Note: OM1 62,5/125 fibre cable available on request for legacy installation, already using 0M1
fibre core. Support up to 1Gbps ethernet
04.2012 | Network Connectivity
FL-C Fibre optic cables
Actassi Fibre
Range Loose tube
OM3 50/125 µm
Type
Length
Diameter
Ref. No
OM3 50/125, Loose tube, 6 fibres
Up to 10Gbps ethernet supported
525 m
2100 m
6,2mm
VDIC42306L
VDIC52306L
OM3 50/125, Loose tube, 12 fibres
Up to 40Gbps ethernet supported
525 m
2100 m
6,2mm
VDIC42312L
VDIC52312L
OM3 50/125, Loose tube, 24 fibres
Up to 100Gbps ethernet supported
525 m
2100 m
7,2mm
VDIC42324L
VDIC52324L
Type
Length
Diameter
Ref. No
6 fibres, OM4 50/125, Loose tube,
Up to 10Gbps ethernet supported
2100 m
6,2mm
VDIC52406L
12 fibres, OM4 50/125, Loose tube,
Up to 40Gbps ethernet supported
2100 m
6,2mm
VDIC52412L
24 fibres, OM4 50/125, Loose tube,
Up to 100Gbps ethernet supported
2100 m
7,2mm
VDIC52424L
Type
Length
Diameter
Ref. No
4 fibres, OS1/OS2 9/125, Loose tube,
Up to 100Gbps ethernet supported
2100 m
6,2mm
VDIC52504L
6 fibres, OS1/OS2 9/125, Loose tube,
Up to 100Gbps ethernet supported
525 m
2100 m
6,2mm
VDIC42506L
VDIC52506L
8 fibres, OS1/OS2 9/125, Loose tube,
Up to 100Gbps ethernet supported
2100 m
6,2mm
VDIC52508L
12 fibres, OS1/0S2 9/125, Loose tube,
Up to 100Gbps ethernet supported
525 m
2100 m
6,2mm
VDIC42512L
VDIC52512L
24 fibres, OS1/0S2 9/125, Loose tube,
Up to 100Gbps ethernet supported
525 m
2100 m
7,2mm
VDIC42524L
VDIC52524L
Optic cable Indoor/outdoor OM3 50/125 µm multimode fibres, green overall jacket.
VDIC52306L
VDIC52312L
VDIC52324L
OM4 50/125 µm
Optic cable indoor/outdoor, OM4 50/125 µm multimode fibres, green overall jacket.
VDIC52406L
VDIC52412L
VDIC52424L
OS1/OS2 9/125 µm
Optic cable indoor/outdoor, OS1/OS2 9/125 µm single-mode fibres, green overall jacket.
VDIC52504L
VDIC52506L
VDIC52508L
VDIC52512L
VDIC52524L
Network Connectivity | 04.2012
Actassi | 67
Actassi Fibre
FL-C Fibre optic cables
Range Tight buffered
FL-C Tight buffered Fibre optic cables
Specifications
■■ Compact and universal cables suitable for indoor and specific outdoor
installations:
– Low Smoke Zero Halogen (LSZH) green coloured external sheath
– UV resistant
– dielectric
– high tensile strength
– rodent retardant
– longitudinally watertight
■■ Maximum pulling force: 1500 Newton (1800 Newton for 24FO)
■■ Rodent protection:
■■ Minimum bending radius: OD x 10 (ex: 51mm for 5,1mm OD)
■■ Ambiant air temperature (minimum & maximum):
– for installation: -5° … +50°C
– for operation: -20°… +70°
– for storage: -40° … +70°
■■ Tight buffered gel-free cable construction with 900 µm coating.
■■ Flame retardant according to IEC 60 332-1, EN 50 265 2.1, NFC 32 070 2.1
(Category C2). Fire retardant according to IEC 60 332-3 C, EN 50 266,
NFC 32 070 2.2 (Category C1)
Performances
■■ OM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 and
ISO/IEC 11801:2011 Ed2.2 OM2.
■■ OM3 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.2 and
ISO/IEC 11801:2011 Ed2.2 OM3.
■■ OM4 50/125 compliant with IEC 60793-2-10 Type A1a.3,
ISO/IEC 11801:2011 Ed2.2 OM4.
■■ OS1/OS2 9/125 compliant with ITU G.652.D, IEC 60793-2-50 Type B1.3,
ISO/IEC 11801:2011 Ed2.2 OS2.
■■ Cable mechanical characteristics tested according to IEC 60794-1
Use
■■ High data rate fibre optic backbones for building and campus
■■ Horizontal cable (FTTD Fibre to the desk) with the 2 fibres
■■ Suitable for direct termination: installation with connectors (prefibred, cold-cured
and/or heat-cured types).
OM2 50/125 µm
Type
Length
Diameter
Ref. No
Optic cable Indoor/outdoor OM2 50/125 µm multimode fibres, green overall jacket.
VDIC52204T
VDIC52206T
VDIC52208T
VDIC52212T
4 fibres, OM2 50/125, Tight buffered,
Up to 10Gbps ethernet supported
2100 m
4,6mm
VDIC52204T
6 fibres, OM2 50/125, Tight buffered,
Up to 10Gbps ethernet supported
525 m
2100 m
5,1mm
VDIC42206T
VDIC52206T
8 fibres, OM2 50/125, Tight buffered,
Up to 10Gbps ethernet supported
2100 m
5,7mm
VDIC52208T
12 fibres, OM2 50/125, Tight buffered,
Up to 10Gbps ethernet supported
525 m
2100 m
6,7mm
VDIC42212T
VDIC52212T
24 fibres, OM2 50/125, Tight buffered,
Up to 10Gbps ethernet supported
525 m
2100 m
8,8mm
VDIC42224T
VDIC52224T
VDIC52224T
68 | Actassi
04.2012 | Network Connectivity
FL-C Fibre optic cables
Actassi Fibre
Range Tight buffered
OM3 50/125 µm
Type
Length
Diameter
Ref. No
2 fibres, OM3 50/125, Tight buffered,
Up to 10Gbps ethernet supported
525 m
2100 m
4,8mm
VDIC42302T
VDIC52302T
6 fibres, OM3 50/125, Tight buffered,
Up to 10Gbps ethernet supported
525 m
2100 m
5,1mm
VDIC42306T
VDIC52306T
12 fibres, OM3 50/125, Tight buffered,
Up to 40Gbps ethernet supported
525 m
2100 m
6,7mm
VDIC42312T
VDIC52312T
24 fibres, OM3 50/125, Tight buffered,
Up to 100Gbps ethernet supported
525 m
2100 m
8,8mm
VDIC42324T
VDIC52324T
Type
Length
Diameter
Ref. No
6 fibres, OM4 50/125, Tight buffered,
Up to 10Gbps ethernet supported
2100 m
5,1mm
VDIC52406T
12 fibres, OM4 50/125, Tight buffered,
Up to 40Gbps ethernet supported
2100 m
6,7mm
VDIC52412T
24 fibres, OM4 50/125, Tight buffered,
Up to 100Gbps ethernet supported
2100 m
8,8mm
VDIC52424T
Type
Length
Diameter
Ref. No
6 fibres, OS1/OS2 9/125, Tight buffered,
Up to 100Gbps ethernet supported on long
distance
525 m
2100 m
5,1mm
VDIC42506T
VDIC52506T
12 fibres, OS1/OS2 9/125, Tight buffered,
Up to 100Gbps ethernet supported on long
distance
525 m
2100 m
6,7mm
VDIC42512T
VDIC52512T
24 fibres, OS1/OS2 9/125, Tight buffered,
Up to 100Gbps ethernet supported on long
distance
525 m
2100 m
8,8mm
VDIC42524T
VDIC52524T
Optic cable Indoor/outdoor OM3 50/125 µm multimode fibres, green overall jacket.
VDIC52302T
VDIC52306T
VDIC52312T
VDIC52324T
OM4 50/125 µm
Optic cable indoor/outdoor, OM4 50/125 µm multimode fibres, green overall jacket.
VDIC52406T
VDIC52412T
VDIC52424T
OS1/OS2 9/125 µm
Optic cable indoor/outdoor, OS1/OS2 9/125 µm single-mode fibres, green overall jacket.
VDIC52506T
VDIC52512T
VDIC52524T
Network Connectivity | 04.2012
Actassi | 69
Actassi Fibre
Fibre optic cables
Range Fibre to the home cable
FL-C Tight buffered Fibre optic cables
Specifications
■■ Compact and universal cable suitable for FTTH Indoor:
– LSZH (Low smoke zero halogen)
– 2 fibre of single mode optical fibre units (G652D or G657A) are positioned in
the centre. Two parallel of fibre reinforced plastic (FRP) are placed on two sides
Performances
■■ Complies with Access Network, fibre to home IEC 60794, Sheath complies with
IEC 60332-1
Use
■■ Fibre to the home (FTTH), fibre to the desk (FTTD), fibre to the telecom
enclosure (FTTE), direct connection to IP CCTV over 100 metres
FTTH Cable
70 | Actassi
Type
Length
Ref. No
2 core G. 652D, FTTH Indoor Fibre Cable, FRP,
LSZH
2000 m
ACTNDFH02SM92DFLS
2 core G. 657A, FTTH Indoor Fibre Cable, FRP,
LSZH
2000 m
ACTNDFH02SM97AFLS
2 core G. 657B, FTTH Indoor Fibre Cable, FRP,
LSZH
2000 m
ACTNDFH02SM97BFLS
04.2012 | Network Connectivity
Fibre Optic Cables
Actassi Fibre
Range Unitube Light Armoured Cables
Direct, Buried Cables
Unitube Fibre Optic Cables
Specifications
■■ Compact Universal cables used for direct burial:
– Accurate fibre excess length
– Specially designed compact structure and PE sheath
– Crush resistant and flexible
– PSP enhances the cable’s crush-resistance, impact-resistance and moistureproofing
– Two parallel steel wires ensure tensile strength
– Small diameter, lightweight and hassle-free installation
– Long delivery length
Performances
■■ OM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 and ISO/IEC
11801:2002 Amd.2 OM2
■■ OS1 9/125 compliant with ITU G.652.D, IEC 60793-2-50 Type B1.3, ISO/IEC ​
11801:2011 Ed2.2
■■ Cable mechanical characteristics tested according to IEC 60794-1
OM1 62.5/125
Optic Fibre Outdoor OM1 62.5/125 micro meter multimode fibre
Type
Length
Ref. No
4 fibre, OM1 62.5/125, Unitube Light Armoured
2000 m
ACTUDUTLA04MM6
6 fibre, OM1 62.5/125, Unitube Light Armoured
2000 m
ACTUDUTLA06MM6
8 fibre, OM1 62.5/125, Unitube Light Armoured
2000 m
ACTUDUTLA08MM6
12 fibre, OM1 62.5/125, Unitube Light Armoured 2000 m
ACTUDUTLA12MM6
OM2 50/125
Optic Fibre Outdoor OM2 50/125 micro meter multimode fibre
Type
Length
Ref. No
4 fibre, OM2 50/125, Unitube Light Armoured
2000 m
ACTUDUTLA04MM5
6 fibre, OM2 50/125, Unitube Light Armoured
2000 m
ACTUDUTLA06MM5
8 fibre, OM2 50/125, Unitube Light Armoured
2000 m
ACTUDUTLA08MM5
12 fibre, OM2 50/125, Unitube Light Armoured
2000 m
ACTUDUTLA12MM5
OS1 9/125
Network Connectivity | 04.2012
Type
Length
Ref. No
4 fibre, OS1 9/125, Unitube Light Armoured
2000 m
ACTUDUTLA04SM9
6 fibre, OS1 9/125, Unitube Light Armoured
2000 m
ACTUDUTLA06SM9
8 fibre, OS1 9/125, Unitube Light Armoured
2000 m
ACTUDUTLA08SM9
12 fibre, OS1 9/125, Unitube Light Armoured
2000 m
ACTUDUTLA12SM9
Actassi | 71
Actassi Fibre
Fibre optic cables
Range Stranded Loose Tube Armoured Cables
Direct, Buried Cables
Staranded Loose Tube Armoured Fibre Optic
Cables
Specifications
■■ Accurate fibre excess length
■■ High strength loose tube
■■ Specially designed compact structure
■■ Crush resistant and flexible
■■ Tight water-resistant measures - steel wire used as central strength member,
loose tube filling compound, 100% cable core filling, APL moisture barrier, PSP
enhanced moisture-proofing and water-blocking material
OM1 62.5/125
Optic Fibre Outdoor OM1 62.5/125 micro meter multimode
Type
Length
Ref. No
4 fibre, OM1 62.5/125, Stranded Loose Tube
Armoured
2000 m
ACTUDUTLA04MM6
6 fibre, OM1 62.5/125, Stranded Loose Tube
Armoured
2000 m
ACTUDUTLA06MM6
12 fibre, OM1 62.5/125, Stranded Loose Tube
Armoured
2000 m
ACTUDUTLA12MM6
OM2 50/125
Optic Fibre Outdoor OM2 50/125 micro meter multimode fibre
Type
Length
Ref. No
4 fibre, OM2 50/125, Stranded Loose Tube
Armoured
2000 m
ACTUDUTLA04MM5
6 fibre, OM2 50/125, Stranded Loose Tube
Armoured
2000 m
ACTUDUTLA06MM5
12 fibre, OM2 50/125, Stranded Loose Tube
Armoured
2000 m
ACTUDUTLA12MM5
OS1 9/125
72 | Actassi
Type
Length
Ref. No
4 fibre, OS1 9/125, Stranded Loose Tube
Armoured
2000 m
ACTUDSLAM04SM9
6 fibre, OS1 9/125, Stranded Loose Tube
Armoured
2000 m
ACTUDSLAM06SM9
12 fibre, OS1 9/125, Stranded Loose Tube
Armoured
2000 m
ACTUDSLAM12SM9
04.2012 | Network Connectivity
Actassi fibre optic patch cords
Actassi fibre optic patch cords ensure a reliable transmission in data networks. They are
available with several types of connectors (SC, LC), from multimode (OM1, OM2, OM3,
OM4) to single-mode (OS1) performances, in different lengths to cover all installation
needs.
All fibre optic patch cords are compliant with ISO/IEC 11801:2011 Ed2.2 and provide safe
plug & play with a high quality thanks to the performances, the LSFRZH sheath (LSZH
with fire retardant properties) and the warranties.
LSFRZH sheath.
Fire retardant material with
low smoke emissions and
non-toxic gases in case
of fire
Colour coding of
sheath
Colour coding of
connector body
Duplex bracelet
Individual test reports with insertion and return loss value for each patch cord supplied.
Network Connectivity | 04.2012
Actassi | 73
Actassi Fibre
Fibre optic patch cords
Range
Specifications
■■ Optic patchcords suitable for patching within technical rooms and at workstation
between passive and active equipments:
- Factory terminated
- 100% optically tested
- Zirconia ceramic material ferrules
- Available in OM1, OM2, OM3, OM4 and OS1 performances
- Available with SC and LC types of connectors
Performances
■■ SC connectors compliant with TIA/EIA 604-3 and IEC 61754-4 Ed. 2
■■ LC connectors compliant with TIA/EIA 604-10A and IEC 61754-20 Ed. 2
■■ ST connectors compliant TIA/EIA 604-2 and IEC 61754-2
■■ OM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 and ISO/IEC
11801:2002 Amd.2 OM2
■■ OM3 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.2 and ISO/IEC
11801:2002 Amd.2 OM3
■■ OS1 9/125 compliant with ITU G.652.D, IEC 60793-2-50 Type B1.3, ISO/IEC
11801:2002 Amd.2
■■ Cable mechanical characteristics tested according to IEC 60794-1
Fibre Optic Patch cords OM1 62.5/125
Type
Length
Ref. No
Optic Patch cord SCd/SCd
1m
2m
3m
5m
10 m
ACTFP2C3M16M10
ACTFP2C3M16M20
ACTFP2C3M16M30
ACTFP2C3M16M50
ACTFP2C3M16M100
Optic Patch Cord SC/SC
1m
2m
3m
5m
10 m
ACTFP1C3M16M10
ACTFP1C3M16M20
ACTFP1C3M16M30
ACTFP1C3M16M50
ACTFP1C3M16M100
Optic Patch Cord LCd/LCd
1m
2m
3m
5m
10 m
ACTFP2L3M16M10
ACTFP2L3M16M20
ACTFP2L3M16M30
ACTFP2L3M16M50
ACTFP2L3M16M100
Optic Patch Cord LC/LC
1m
2m
3m
5m
10 m
ACTFP1L3M16M10
ACTFP1L3M16M20
ACTFP1L3M16M30
ACTFP1L3M16M50
ACTFP1L3M16M100
Optic Patch Cord LCd/SCd
1m
2m
3m
5m
10 m
ACTFP2CL3M16M10
ACTFP2CL3M16M20
ACTFP2CL3M16M30
ACTFP2CL3M16M50
ACTFP2CL3M16M100
Optic Patch Cord LC/SC
1m
2m
3m
5m
10 m
ACTFP1CL3M16M10
ACTFP1CL3M16M20
ACTFP1CL3M16M30
ACTFP1CL3M16M50
ACTFP1CL3M16M100
Optic Patch Cord ST/ST
1m
2m
3m
5m
10 m
ACTFP1T3M16M10
ACTFP1T3M16M20
ACTFP1T3M16M30
ACTFP1T3M16M50
ACTFP1T3M16M100
Optic Patch Cord STd/STd
1m
2m
3m
5m
10 m
ACTFP2T3M16M10
ACTFP2T3M16M20
ACTFP2T3M16M30
ACTFP2T3M16M50
ACTFP2T3M16M100
Optic Patch Cord ST/SC
1m
2m
3m
5m
10 m
ACTFP1TC3M16M10
ACTFP1TC3M16M20
ACTFP1TC3M16M30
ACTFP1TC3M16M50
ACTFP1TC3M16M100
Optic Patch Cord STd/SCd
1m
2m
3m
5m
10 m
ACTFP2TC3M16M10
ACTFP2TC3M16M20
ACTFP2TC3M16M30
ACTFP2TC3M16M50
ACTFP2TC3M16M100
ACTFP2C3M16M10
ACTFP2L3M16M10
ACTFP2CL3M16M10
ACTFP2T3M16M10
ACTFP2TC3M16M10
74 | Actassi
04.2012 | Network Connectivity
FL-C Fibre optic patch cords
Actassi Fibre
Range
Fibre Optic Patch Cord OM2 50/125
ACTFP2C3M25M10
Type
Length
Ref. No
Optic Patch Cord SCd/SCd
1m
2m
3m
5m
10 m
ACTFP2C3M25M10
ACTFP2C3M25M20
ACTFP2C3M25M30
ACTFP2C3M25M50
ACTFP2C3M25M100
Optic Patch Cord SC/SC
1m
2m
3m
5m
10 m
ACTFP1C3M25M10
ACTFP1C3M25M20
ACTFP1C3M25M30
ACTFP1C3M25M50
ACTFP1C3M25M100
Optic Patch Cord LCd/LCd
1m
2m
3m
5m
10 m
ACTFP2L3M25M10
ACTFP2L3M25M20
ACTFP2L3M25M30
ACTFP2L3M25M50
ACTFP2L3M25M100
Optic Patch Cord LC/LC
1m
2m
3m
5m
10 m
ACTFP1L3M25M10
ACTFP1L3M25M20
ACTFP1L3M25M30
ACTFP1L3M25M50
ACTFP1L3M25M100
Optic Patch Cord LCd/SCd
1m
2m
3m
5m
10 m
ACTFP2CL3M25M10
ACTFP2CL3M25M20
ACTFP2CL3M25M30
ACTFP2CL3M25M50
ACTFP2CL3M25M100
Optic Patch Cord LC/SC
1m
2m
3m
5m
10 m
ACTFP1CL3M25M10
ACTFP1CL3M25M20
ACTFP1CL3M25M30
ACTFP1CL3M25M50
ACTFP1CL3M25M100
Optic Patch Cord ST/ST
1m
2m
3m
5m
10 m
ACTFP1T3M25M10
ACTFP1T3M25M20
ACTFP1T3M25M30
ACTFP1T3M25M50
ACTFP1T3M25M100
Optic Patch Cord STd/STd
1m
2m
3m
5m
10 m
ACTFP2T3M25M10
ACTFP2T3M25M20
ACTFP2T3M25M30
ACTFP2T3M25M50
ACTFP2T3M25M100
Optic Patch Cord ST/SC
1m
2m
3m
5m
10 m
ACTFP1TC3M25M10
ACTFP1TC3M25M20
ACTFP1TC3M25M30
ACTFP1TC3M25M50
ACTFP1TC3M25M100
Optic Patch Cord STd/SCd
1m
2m
3m
5m
10 m
ACTFP2TC3M25M10
ACTFP2TC3M25M20
ACTFP2TC3M25M30
ACTFP2TC3M25M50
ACTFP2TC3M25M100
ACTFP2L3M25M10
ACTFP2CL3M25M10
ACTFP2T3M25M10
ACTFP2TC3M125M10
Network Connectivity | 04.2012
Actassi | 75
Actassi Fibre
FL-C Fibre optic patch cords
Range
Fibre Optic Patch Cord OM3 50/125
Type
Length
Ref. No
Optic Patch Cord SCd/SCd
1m
2m
3m
5m
10 m
ACTFP2C3M35M10
ACTFP2C3M35M20
ACTFP2C3M35M30
ACTFP2C3M35M50
ACTFP2C3M35M100
Optic Patch Cord LCd/LCd
1m
2m
3m
5m
10 m
ACTFP2L3M35M10
ACTFP2L3M35M20
ACTFP2L3M35M30
ACTFP2L3M35M50
ACTFP2L3M35M100
Optic Patch Cord LCd/SCd
1m
2m
3m
5m
10 m
ACTFP2CL3M35M10
ACTFP2CL3M35M20
ACTFP2CL3M35M30
ACTFP2CL3M35M50
ACTFP2CL3M35M100
Optic Patch Cord STd/STd
1m
2m
3m
5m
10 m
ACTFP2T3M35M10
ACTFP2T3M35M20
ACTFP2T3M35M30
ACTFP2T3M35M50
ACTFP2T3M35M100
Optic Patch Cord STd/SCd
1m
2m
3m
5m
10 m
ACTFP2TC3M35M10
ACTFP2TC3M35M20
ACTFP2TC3M35M30
ACTFP2TC3M35M50
ACTFP2TC3M35M100
Type
Length
Ref. No
Optic Patch Cord LCd/LCd
1m
2m
3m
5m
VDIP544551
VDIP544552
VDIP544553
VDIP544555
ACTFP2C3M35M10
ACTFP2L3M35M10
ACTFP2CL3M35M10
ACTFP2T3M35M10
ACTFP2TC3M135M10
Fibre Optic Patch Cord OM4 50/125
VDIP544551
76 | Actassi
04.2012 | Network Connectivity
FL-C Fibre optic patch cords
Actassi Fibre
Range
Fibre Optic Patch Cord OS1 9/125
ACTFP2C3S19S10
Type
Length
Ref. No
Optic Patch Cord SCd/SCd
1m
2m
3m
5m
10 m
ACTFP2C3S19S10
ACTFP2C3S19S20
ACTFP2C3S19S30
ACTFP2C3S19S50
ACTFP2C3S19S100
Optic Patch Cord SC/SC
1m
2m
3m
5m
10 m
ACTFP1C3S19S10
ACTFP1C3S19S20
ACTFP1C3S19S30
ACTFP1C3S19S50
ACTFP1C3S19S100
Optic Patch Cord LCd/LCd
1m
2m
3m
5m
10 m
ACTFP2L3S19S10
ACTFP2L3S19S20
ACTFP2L3S19S30
ACTFP2L3S19S50
ACTFP2L3S19S100
Optic Patch Cord LC/LC
1m
2m
3m
5m
10 m
ACTFP1L3S19S10
ACTFP1L3S19S20
ACTFP1L3S19S30
ACTFP1L3S19S50
ACTFP1L3S19S100
Optic Patch Cord LCd/SCd
1m
2m
3m
5m
10 m
ACTFP2CL3S19S10
ACTFP2CL3S19S20
ACTFP2CL3S19S30
ACTFP2CL3S19S50
ACTFP2CL3S19S100
Optic Patch Cord LC/SC
1m
2m
3m
5m
10 m
ACTFP1CL3S19S10
ACTFP1CL3S19S20
ACTFP1CL3S19S30
ACTFP1CL3S19S50
ACTFP1CL3S19S100
Optic Patch Cord SC/APC
1m
2m
3m
5m
10 m
ACTFP1ACA3S19S10
ACTFP1ACA3S19S20
ACTFP1ACA3S19S30
ACTFP1ACA3S19S50
ACTFP1ACA3S19S100
Optic Patch Cord ST/ST
1m
2m
3m
5m
10 m
ACTFP1T3S19S10
ACTFP1T3S19S20
ACTFP1T3S19S30
ACTFP1T3S19S50
ACTFP1T3S19S100
Optic Patch Cord STd/STd
1m
2m
3m
5m
10 m
ACTFP12T3S19S10
ACTFP12T3S19S20
ACTFP12T3S19S30
ACTFP12T3S19S50
ACTFP12T3S19S100
Optic Patch Cord ST/SC
1m
2m
3m
5m
10 m
ACTFP1TC3S19S10
ACTFP1TC3S19S20
ACTFP1TC3S19S30
ACTFP1TC3S19S50
ACTFP1TC3S19S100
Optic Patch Cord STd/SC
1m
2m
3m
5m
10 m
ACTFP2TC3S19S10
ACTFP2TC3S19S20
ACTFP2TC3S19S30
ACTFP2TC3S19S50
ACTFP2TC3S19S100
ACTFP2L3S19S10
ACTFP2CL3S19S10
ACTFP1T3S19S10
ACTFP2TC3S19S10
Network Connectivity | 04.2012
Actassi | 77
Fibre optic connectors
Actassi Fibre
Range
Fibre Optic connectors
Specifications
bb Optic pigtails suitable for splices termination with fibre optic cables inside optic
patchpanels and/or at workstation:
-Zirconia ceramic material ferrules
-Colored housing to identify quickly performances of the connectors
Performances
bb SC connectors compliant with TIA/EIA 604-3 and IEC 61754-4 Ed. 2
bb LC connectors compliant with TIA/EIA 604-10A and IEC 61754-20 Ed. 2
bb ST connectors
Multimode Connectors
ACTFCSCMM3
ACTFCLCMM3
ACTFCSTMM3
Type
Ref. No
Connector SC, 3.0 mm
ACTFCSCMM3
Connector SC, 0.9 mm
ACTFCSCMM9
Connector LC, 3.0 mm
ACTFCLCMM3
Connector LC, 1.8 mm
ACTFCLCMM1
Connector ST, 3.0 mm
ACTFCSTMM3
Connector ST, 0.9 mm
ACTFCSTMM9
Singlemode Connectors
78 | Actassi
Type
Ref. No
Connector SC, 3.0 mm
ACTFCSCSM3
Connector SC, 0.9 mm
ACTFCSCSM9
Connector LC, 3.0 mm
ACTFCLCSM3
Connector LC, 1.8 mm
ACTFCLCSM1
Connector SC/APC, 3.0 mm
ACTFCSCASM3
Connector ST, 3.0 mm
ACTFCSTSM3
Connector ST, 0.9 mm
ACTFCSTSM9
04.2012 | Network Connectivity
Fibre optic pigtails
Actassi Fibre
Range
FL-C Fibre optic pigtails
Specifications
bb Optic pigtails suitable for splices termination with fibre optic cables inside optic
patchpanels and/or at workstation:
-Factory terminated
-Zirconia ceramic material ferrules
-Different lengths available
Performances
bb SC connectors compliant with TIA/EIA 604-3 and IEC 61754-4 Ed. 2
bb LC connectors compliant with TIA/EIA 604-10A and IEC 61754-20 Ed. 2
bb ST connectors
Pigtail multimode
Type
Length (m)
Ref. No
Pigtail OM2 50/125 LC
1.0
ACTFT1L3M25M10
ACTFT1C3M25M10
VDIP643401
Pigtail OM2 50/125 LC
2.0
ACTFT1L3M25M20
Pigtail OM3 50/125 LC
0.7
VDIP643401
Pigtail OM4 50/125 LC
0.7
VDIP644401
Pigtail OM2 50/125 SC
1.0
ACTFT1C3M25M10
VDIP644401
ACTFT1C3M25M10
ACTFT1T3M25M10
Pigtail OM2 50/125 SC
2.0
ACTFT1C3M25M20
Pigtail OM3 50/125 SC
0.7
VDIP643201
Pigtail OM1 62.5/125 ST
1.0
ACTFT1T3M25M10
Pigtail OM1 62.5/125 ST
2.0
ACTFT1T3M25M20
Pigtail OM2 50/125 ST
0.7
VDIP642101
1.0
ACTFT1L3S19S10
Pigtail singlemode
Type
Pigtail OS1 9/125 LC
Network Connectivity | 04.2012
Ref. No
Pigtail OS1 9/125 LC
2.0
ACTFT1L3S19S20
Pigtail OS1 9/125 SC
1.0
ACTFT1C3S19S10
Pigtail OS1 9/125 SC
2.0
ACTFT1C3S19S20
Pigtail OS1 9/125 SC/APC
1.0
ACTFT1CA3S19S10
Pigtail OS1 9/125 SC/APC
2.0
ACTFT1CA3S19S20
Pigtail OS1 9/125 ST
1.0
ACTFTIT3519510
Pigtail OS1 9/125 ST
2.0
ACTFTIT3519520
Actassi | 79
Actassi fibre optic panels
A simple all-­in-one concept, pre-­equipped with for example Quick Fix function, coiling
wheels and cable glands. It has a capacity of 24 fibres and has transparent lids for protection and a clear visibility of the inside. Can hold up to 4 cover plates, and since it is delivered with 3 blank plates, the choice is open for the fourth to be used according to your
needs. The cover plates are available in empty and pre-­equipped versions with adapters.
To match your fibre optic
panel we have developed
a range of pre-­equipped
cover­plates. It’s a time­saving, safer and smarter
way to work with your
installations.
80 | Actassi
Coiling wheels
The panel contains
wheels to keep the fibres
in place and to avoid
tension on the connectors. This will also
give a correct bending
radius and more space
for excess lengths of the
fibres.
Excellent protection
The transparent covers
give both protection
and overview. The front
covers can be opened
for quick access and
the top cover is easily
removed.
Rear quick fixation
A quick-fixation system
is provided for the cables at the rear. Use the
provided 16 mm glands
for cables. If a 21mm
gland (not provided) is
needed, just remove the
rear plastic support and
fix the gland directly in
the cable entry. Quick
and easy!
Sliding function
The panel can be slided
or completely removed
for a more convenient
working position.
Clear marking
Since the marking is
very clear, identify­ing the
cable you are looking for
will never be a problem.
04.2012 | Network Connectivity
Integrated guiding
panel
A patchcord guiding
panel, with smoothly
shaped edges to protect
the cords, is integrated in
the panel. So there is no
need to add a separate
guiding panel that would
take another 1U space.
19-C Fibre optic panels
Actassi Fibre
Range
Evolution universal sliding fibre optic panel 1U
■■ Universal sliding 19" fibre optic panel with 4 positions, equipped with 3 blank
plates. The 1st position is empty and is to be fitted with suitable coverplate.
■■ 1 Quick Fix function on both sides to allow a simple, quick fixing position and
sliding feature.
■■ Removable transparent cover mounted.
■■ Fibre patchcord guiding structure at the front, protected by cover equipped with
label holders.
Evolution panel for direct terminations
■■ Equipped with 2 coiling wheels and 2 PG9 (Ø 7 mm max.) cable glands.
Description
Evolution Fibre optic panel 1U with 3 blank plates for direct
terminations
Reference
VDIG150991
Evolution panel for splices
VDIG150991
■■ Equipped with one coiling wheel, 2 PG9 (Ø 7 mm max.) cable glands and one
splicing cassette (without splice holder).
Description
Evolution Fibre optic panel 1U with 3 blank plates, for splices
Reference
VDIG150991001
VDIG150991001
Splicing optic cassette
■■ Delivered with a cover.
■■ Capacity up to 24 fibres. Recommended for 12 fibres.
■■ 2 cassettes can be stacked inside the 1U fibre optic panel.
Description
VDIM15C112
Network Connectivity | 04.2012
Fibre optic splicing cassette with cover
Reference
VDIM15C112
Actassi | 81
Actassi Fibre
19-C Fibre optic panels
Range
Plates
■■ Blank plates and coverplates to be fixed on fibre optic Quick Fix panel
ref VDIG150991,VDIG150991001 and VDIG050991.
■■ Quick fixation by push-pull rivets.
Coverplates with adapters
VDIM1530311
VDIM1510611
Description
Reference
Coverplate provided with 3 SC duplex multimode adapters
VDIM1530311
Coverplate provided with 6 ST multimode adapters
VDIM1510611
Coverplate provided with 3 LC duplex multimode adapters
VDIM1550311
VDIM1550311
Coverplates without adapters
Description
VDIM153031
VDIM151061
Reference
Coverplate for 3 SC duplex adapters
VDIM153031
Coverplate for 6 ST adapters
VDIM151061
Coverplate for 3 LC duplex adapters
(compatible with LC duplex Adapters / square VDIB6051001 and
VDIB6052003).
VDIM155031
Coverplate for 6 LC duplex adapters
(compatible with LC duplex Adapters / rectangular VDIB60510011 and
VDIB6052003).
VDIM155061
VDIM155031
VDIM155061
Blank plate
Description
Blank plate for fibre optic panel
VDIM150061
82 | Actassi
04.2012 | Network Connectivity
Reference
VDIM150061
Fibre LAN Cables
Actassi Fibre
Range
Adapters
■■ Fibre optic adapters suitable to connect and align optic connectors (for both
applications: optic patchpanels in technical rooms and faceplates at
workstation).
- Both multimode and singlemode versions
- Identification of multimode adapters with beige color
- Identification of singlemode adapters with blue color
- Available in SC, SC APC, ST, LC and MPO formats
- Zirconia ceramic material ferrules
- Snap-in latch
Multimode adapters
Type
VDIB6031001
VDIB6031001
VDIB6051001
VDIB6051003
Ref. No
SC Duplex Adapter MM
VDIB6031001
SC Simplex Adapter MM
VDIB6021001
ST Simplex Adapter MM
VDIB6011001
LC Duplex Adapter sq MM
VDIB6051001
LC Duplex Adapter rect MM
VDIB6051003
SC-ST Duplex Adapter MM
ACTFA2CTMMZP
Singlemode adapters
Type
VDIB6032001
VDIB6072001
VDIB6082001
VDIB6052001
VDIB6052003
Network Connectivity | 04.2012
Ref. No
SC Duplex Adapter SM
VDIB6032001
SC APC Simplex Adapter SM
VDIB6072001
SC APC Duplex Adapter SM
VDIB6082001
LC Duplex Adapter sq SM
VDIB6052001
LC Duplex Adapter rect SM
VDIB6052003
ST Simplex Adapter SM
ACTFA1TSMZM
SC-ST Duplex Adapter SM
ACTFA2CTSMZP
Actassi | 83
Enclosures for Indoor needs
Wall-mounted
84 | Actassi
Floor-standing
04.2012 | Network Connectivity
Actassi Enclosures
Actassi wall-mounted enclosures
KDB 19" enclosure. .....................................................................................................94
OPB 19" OpenBox enclosure. ...........................................................................97
Actassi floor-standing enclosures
BTR 19" Technical rack..........................................................................................106
VDA 19" Cabling enclosures............................................................................107
Data Center Patching Frame.......................................................................... 110
VDS 19" Server enclosure. ...................................................................................111
Actassi 19-E Universal Accessories.....................................................................116
Earth connection........................................................................................................116
Fixing components...................................................................................................116
Shelves . ..............................................................................................................................117
Power distribution. ...................................................................................................118
Cable management................................................................................................120
P & S 19" Customisation service............................................................................ 124
Technical info. ........................................................................................................................ 125
Network Connectivity | 04.2012
Actassi | 85
Actassi Enclosures
With the Actassi system you can create a seamless end-to-end network connectivity
solution for all needs. There are different conditions and demands on the installations in
buildings, data centres and small offices. That is why Actassi includes all possible sizes of
wall-mounted and floor-standing enclosures, from 6 to 47 units in different widths, depths,
colours and compositions. You can always find an Actassi enclosure that gives a perfect
result.
Do you want to have
other enclosures than
standard? No problem.
With Actassi enclosures
it's possible to customize
colour, accessories, specific lining etc according to
your personal needs.
The Digital Rule helps you select products
Hard to select the Actassi enclosures, RJ45
connectors, patch panels and cables? Visit
schneider-electric.com and try our Digital Rule.
It’s an intelligent online e-catalogue which will
facilitate your choices and ensure an error-free
specification.
86 | Actassi
04.2012 | Network Connectivity
Actassi wall-mounted enclosures
The Actassi wall-mounted OPB OpenBox enclosures allow you to easily integrate patch
panels, cables, switches and digital recorders. All the lining can be removed without tools,
and with the swing-rack version of OPB, with a quick-locking system, you’ll get access to
the connections from the back to handle the maintenance in a convenient way. Too hot in
the enclosure? No problem, it’s easy to integrate a blanking plate with two fans.
Network Connectivity | 04.2012
Actassi | 87
Actassi wall-mounted
enclosures – adding
value while saving
space
New, space-saving
knock-down boxes.
Easy to stock, carry
and assemble .
88 | Product Name
01.2011 | Part of Portfolio
Streamline cost, size and capacity
Sometimes things are not what they seem. Can a small, easily manageable box really provide sufficient capacity? Yes – Actassi wall-mounted enclosures can support
connectivity for up to 144 workplaces. The enclosures are also suitable for distributed solutions in larger applications, such as office buildings and hospitals.
Actassi wall-mounted
enclosures are ideal for
network, telephone,
security and audio/video
applications.
Regardless the line of business, it lies in every
and data, wall-mounted enclosures offer great,
owner’s interest to optimise the work conditions
space-saving opportunities that can make a
– without spending a mere fortune on unused
significant difference for the operative every-
capacity. When it comes to supplying the work
day work.
area with safe and reliable access to network
Network Connectivity | 04.2012
Actassi | 89
Capacity and versatility,
straight from the wall
A well thought-out infrastructure is the best way to provide for a problem-free, reliable
usage. Take a look at the pictures to the left. Both illustrate realistic, adequate examples
of how to make best use of a wall-mounted enclosure, used as a single unit or a distributed solution.
Rather than investing in hefty, oversized
enclosures, you can benefit from flexible wallAll Actassi wall-mounted
enclosures are certified
in compliance with the
directive RoHs, with the
19” standard IEC602973-100 and EIA-310-E.
mounted enclosures and get true convenience
in terms of small size and impressive capacity.
Not to mention the advantages in store for the
installer, whether the enclosure is to be used as
a single unit or as a distributed solution. Mounting and installing, as well as maintaining and
extending over time – with thorough planning,
everything is carried out with minimum effort.
19" standard for 6-21U heights
Actassi wall-mounted enclosures are available in
two versions – KDB and OPB. Both are made to
match the full Actassi range of 19" panels and
accessories. This ensures an effective highdensity solution, always with the adequate height.
Actassi KDB, height 15U
Actassi OPB with plain sheet steel door, 9U
Actassi KDB with fans and brush gasket, 9U
90 | Actassi
Actassi OPB with Securit® glass door, 9U
04.2012 | Network Connectivity
Thumbs up for knock-down boxes
– ideal for smaller businesses
Imagine providing excellent equipment for network, telephone, security and audio video
while saving up to 60% on stock space. Add smart benefits like the flat package and the
exceptional mounting time of 5 minutes, and you have the major advantages of the KDB
enclosure in a little box.
Actassi KDB knock-down box
A sturdy, robust enclosure made of welded
sheet steel, with great opportunities for several
kinds of installations, would probably lead to
quite time- and space-consuming mounting and
installation. Not the Actassi KDB knock-down
boxes The keyword is “easy”.
Easy to stock, assemble and manage
The Actassi KDB boxes
are available at your wholesaler. Always quick and
easy to find an enclosure
for your needs.
Let’s start with the package. The clever flat pack
will help save up to 60% on storage space. It’s
easy to stock – just grab a couple of packages
from the shelf, load them into the your car and
you are ready to go.
On site, the enclosure can be put up, wall-mounted and prepared for the components in just a
few minutes. In addition, there are a number of
handy features that provide equal easiness: the
tool-less door with spring hinges for optimised
access to the patch panels, the brush panel for
swift cable management and the fan plates for
Save 60% on stock space
The KDB enclosure is easy
to stock and load. The flat
pack allows you to save up
to 60% on space, which
means you can make more
installations in less time.
smart ventilation.
5 minutes
1
1
person
tool
Actassi KDB enclosure
offers exceptional simplicity in terms of mounting
and installation. One person can have the KDB set
up in less than 5 minutes.
And the only tool needed
is a regular screwdriver.
Network Connectivity | 04.2012
Actassi | 91
92 | Product Name
01.2011 | Part of Portfolio
Secure maximised capacity and
swift maintenance for vital needs
Time for adjustments? Just open the sides and fold out the swing rack. Replace
and add whatever parts you need, no tools are necessary. Fold back the rack, close
the sides and you are done. To increase the flexibility of the entire installation, use
the Actassi OPB as a distributed solution.
Actassi OPB – open for installation
The Actassi OPB is wide open for a swift and
The Actassi OPB serves
perfectly as a distributed
solution. In a hospital for
instance, the need for
quick, reliable and easily
expandable network connectivity can be crucial.
struggle-free installation. Steady as a rock, even
with the side panels and the door dismounted.
The swing rack makes all the difference
When making the first installation, as well as
continuous upgrades, you will find that the
swing rack makes all the difference for you as
an installer. Access from all sides, pre-cut cable
entries and minimum usage of tools are some of
the other features that make the OPB truly open
for installation and maintenance.
Side panels are easily
removed without tools.
Easy to install using
fixing points.
Pre-cut cable entry
from both top and
bottom.
Door easily mounted
and removed without
tools.
Both sides are
openable.
Securit® safety glass door.
Key lock
Side panel is opened
and locked from the
inside.
Quick-lock, 1/4-turn
nuts.
Swing rack for easy
installation and maintenance.
Network Connectivity | 04.2012
Gradual 25 mm
depth adjustment.
Actassi | 93
Actassi Enclosures
KDB
19" Wall Knock-Down Box
Simple and space-saving
5 minutes
You need only five
minutes to mount the
Actassi KDB enclosure.
Easy to stock and ship
The flat-pack architecture of KDB saves 60%
of space in the stock. It
is also very easy to ship
and carry.
Easy to assemble
The symmetric construction of the top, bottom and
side panels gives easy
and safe assembling.
Easy to use
Tool-less door with spring
hinges facilitates the access to the patch panels.
Easy to manage the
cables (option)
Use the 19” brush panel
to manage the entry of
cables in a safe way in the
top and bottom.
Smart ventilation
(option)
Secure the installed components like switches and
PABX. Use the 19” smart
fan plates equipped with
a thermostat adjustable
from 0° to 55°c
Easy to adapt
If you need more space
at the front of the enclosure, you can easily
move the 19” uprights
each 25 mm.
Easy to assemble. You
only need one single tool.
A drilling template
facilitates the fixation on
the wall.
40 kg
The body allows mounting
of components up to 40 kg.
94 | Actassi
04.2012 | Network Connectivity
KDB
Actassi Enclosures
19" Wall Knock-Down Box
Simple and space-saving
Introduction and selection guides
■■ Flat-pack wall-mounted enclosure dismounted in 1 package
■■ Symmetric enclosure made from welded sheet steel, powder-painted, leather-grain finish, RAL 7035 light grey epoxy-polyester.
■■ Enclosure made up of a body, one pair of 19" fixed uprights and a Securit® glass transparent door with key nº 333.
■■ Top and bottom 19” Knock-down plates for entry cables and fans – 0U
■■ Ingress Protection : IP20
– Object size protected against > 12,5mm
– No liquid protected
■■ Impact Protection : IK08
– Impact energy = 5 joules
■■ Acceptable load: 3 kg/U; max. 40 kg per enclosure.
(Include 25% of margin load rating according to the IEC 62208)
■■ Certifications : In compliance with the directive RoHs, with the 19" standard IEC60297-3-100 and EIA-310-E
■■ Brush entry cables NSYCRTM1U1PS (in option)
■■ Smart fan NSY1FAN230T to manage the temperature from 0° to 55°c (in option)
60%
The flat-pack saves 60%
of space in the stock
Number of U
Height
Width
Depth
6U
9U
12U
15U
352
485
618
752
600
600
600
600
400
400
600
600
Enclosure
NSYKDB6U4F
NSYKDB9U4F
NSYKDB12U6F
NSYKDB15U6F
Network Connectivity | 04.2012
Brush entry cables
Smart fan
NSYCRTM1U1PS
NSY1FAN230T
Actassi | 95
KDB
Actassi Enclosures
Thermal management
Smart and Basic fans
■■ 19” fan plate
– 0U on top and bottom of the box
– 3U fixed on the 19” uprights
■■ Equipped with 1 or 2 fans
– 90 CFM for each one (155m3/h)
– 230V – AC
– Plugs IEC14 to power
– In: Socket IEC C14 - To be powered with IEC C13 plug power cable
■■ Delivered without cable
Smart fans
■■ Equipped with 1 adjustable thermostat 0° to 55°C
■■ Equipped with 1 led switch On/Off
Basic fans
■■ WITHOUT thermostat and switch
Smart fans
Type
Basic fans
Reference
1 Fan
NSY1FAN230T
2 Fans
NSY2FAN230T
Type
Reference
1 Fan
NSY1FAN230
2 Fans
NSY2FAN230
Cables for smart & basic fan plates
■■ Black power cables of 3m to power the fan plates
96 | Actassi
Plug Out
Plug In
Reference
Plug Out
Plug In
Reference
IEC C13
Schuko/FR
NSYIEC13SCH
IEC C13
IEC C14
NSYIEC13IEC14
IEC C13
UK
NSYIEC13UK
04.2012 | Network Connectivity
OPB
Actassi Enclosures
19" Wall Open Box
Ergonomic and adaptable
Actassi OPB is assembled
at delivery, ready to use
Easy to install
The Actassi OPB enclosure can be wall-mounted by a single person
using the fixing points
intended for the passage
of holding screw heads
into the wall.
Ergonomics
The side panels swing
through 120º and can be
easily removed without
tools. Rear access is
easy. Door easily removable without tools.
Easy to cable
The cable entries, top or
bottom, are pre-cut and
open into the rear of the
Actassi OPB enclosure.
The enclosure fits around
those cables that are
already in place (rear
blanking plate optional).
Adaptable
The 19" uprights are
designed to be depthadjustable with a step
of 25 mm. Their fixing
with screws guarantees
the rigidity of the Actassi
OPB enclosure.
Easy to install and to
reverse
Its drilling template on the
packaging and its 4 wallmounting points enable
quick and efficient installation while guaranteeing
reversibility by simply
turning the enclosure
around.
Ergonomics
The side panels are
locked from the inside by
two 1/4-turn nuts, accessible only when the door
is open.
Side panels , swing rack
and door can be opened
and removed without
tools. Quick and easy.
50 kg
The body allows mounting
of components up to 50
kg.
Network Connectivity | 04.2012
Actassi | 97
OPB
Actassi Enclosures
19" Wall Open Box with swing rack
Open for easy installation and maintenance
Introduction and selection guides
■■ Wall-mounting enclosure made from folded and welded sheet steel, powder paint, leather-grain finish, RAL 7035 light grey epoxy-polyester.
■■ Enclosure made up of a body, 2 hinged and removable side panels, a 19" swing rack and a Securit® glass transparent door with key nº 333.
■■ Ingress Protection : IP20
– Object size protected against > 12,5mm
– No liquid protected
■■ Impact Protection : IK08
– Impact energy = 5 joules
■■ Available enclosures :
– 5 heights: 6, 9, 12, 15, 18 U.
– 3 depths: 400, 500 and 600 mm.
■■ Swing rack: Acceptable load of 25 kg. (Include 25% of margin load rating
according to the IEC 62208)
■■ Certifications : In compliance with the directive RoHs, with the 19" standard IEC60297-3-100 and EIA-310-E
Installed enclosures
Total accessibility with
the swing rack and the
swingable and removable
side panels and door.
Number of U
6
6
9
9
12
12
15
15
18
98 | Actassi
Dimensions (mm)
Enclosure
Blanking
Cable-gland plate
Blanking plate
Height
Width
Depth
reference
plate
with brush gasket
with 2 fans
380
380
515
515
650
650
780
780
915
600
600
600
600
600
600
600
600
600
400
500
400
500
500
600
500
600
500
NSYOPB6U4P
NSYOPB6U5P
NSYOPB9U4P
NSYOPB9U5P
NSYOPB12U5P
NSYOPB12U6P
NSYOPB15U5P
NSYOPB15U6P
NSYOPB18U5P
NSYOPB6UTPN
NSYOPB6UTPN
NSYOPB9UTPN
NSYOPB9UTPN
NSYOPB12UTPN
NSYOPB12UTPN
NSYOPB15UTPN
NSYOPB15UTPN
NSYOPB18UTPN
NSYECP300
NSYECVT300
04.2012 | Network Connectivity
OPB
Actassi Enclosures
19" Wall Open Box with fixed rack
Ergonomic and adaptable
Introduction and selection guides
■■ Wall-mounting enclosure made from folded and welded sheet steel, powder paint, eather-grain finish, RAL 7035 light grey epoxy-polyester.
■■ Enclosure made up of a body, 2 hinged and removable side panels, 19" fixed uprights and a Securit® glass transparent door or plain sheet steel door with
key nº 333.
■■ Ingress Protection : IP20
– Object size protected against > 12,5mm
– No liquid protected
■■ Impact Protection : IK08 (for glazed door)
– Impact energy = 5 joules
■■ Impact Potection : IK10 (for plain door)
– Impact energy = 20 joules
■■ Available enclosures:
– 6 heights: 6, 9, 12, 15, 18, 21 U.
– 3 depths: 400, 500 and 600 mm.
■■ Fixed 19" rack. Acceptable load: 3 kg/U; max. 50 kg per enclosure. (Include 25%
of margin load rating according to the IEC 62208)
■■ Certifications : In compliance with the directive RoHs, with the 19" standard IEC60297-3-100 and EIA-310-E
2U extra space "for free",
1U in the top and 1U in the
bottom. Can be used for
example for power rails.
Number of U
6
6
9
9
9
12
12
12
15
15
15
18
18
21
21
Installed enclosures
Dimensions (mm)
Height
Width
Depth
380
380
515
515
515
650
650
650
780
780
780
915
915
1050
1050
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
400
500
400
500
600
400
500
600
400
500
600
400
500
500
600
Enclosure reference
Blanking plate
Cable-gland plate with
brush gasket
Blanking plate with
2 fans
NSYOPB6U4F
NSYOPB6U5F
NSYOPB9U4F
NSYOPB9U5F
NSYOPB9U6F
NSYOPB12U4F
NSYOPB12U5F
NSYOPB12U6F
NSYOPB15U4F
NSYOPB15U5F
NSYOPB15U6F
NSYOPB18U4F
NSYOPB18U5F
NSYOPB21U5F
NSYOPB21U6F
NSYOPB6UTPN
NSYOPB6UTPN
NSYOPB9UTPN
NSYOPB9UTPN
NSYOPB9UTPN
NSYOPB12UTPN
NSYOPB12UTPN
NSYOPB12UTPN
NSYOPB15UTPN
NSYOPB15UTPN
NSYOPB15UTPN
NSYOPB18UTPN
NSYOPB18UTPN
NSYOPB21UTPN
NSYOPB21UTPN
NSYECP300
NSYECVT300
Enclosure with plain door
Number of U
 9
12
15
18
Dimensions (mm)
Height
Width
Depth
515
650
780
915
600
600
600
600
400
400
500
500
Enclosure reference
Blanking plate
Cable-gland plate with
brush gasket
Blanking plate with
2 fans
NSYOPB9U4FR
NSYOPB12U4FR
NSYOPB15U5FR
NSYOPB18U5FR
NSYOPB9UTPN
NSYOPB12UTPN
NSYOPB15UTPN
NSYOPB18UTPN
NSYCP300
NSYECVT300
Network Connectivity | 04.2012
Actassi | 99
Actassi Enclosures
OPB
19" Mobile Open Box
Flexible and versatile
Made for audiovisual application
Technical characteristics
■■ The body of the enclosure has cut-outs at the top and bottom to allow natural ventilation.
The cables can enter through the rear opening and through the pre-cut areas on
the top and bottom surfaces of the enclosure.
■■ 4 cut-outs are provided for wall-mounting.
■■ The 2 side panels can be opened very easily by means of two 1/4-turn nuts.
These panels can be removed, without tools.
■■ The 19" uprights in zinc-coated steel are depth-adjustable on a 25 mm step.
■■ The Securit® glass door is completely reversible. It is equipped with a handle and a
lock with closure by key nº 333. It is easily dismountable without tools.
■■ Certifications : In compliance with the directive RoHs, with the 19" standard IEC60297-3-100 and EIA-310-E
Composition
■■ Actassi OPB with top and bottom cut-outs.
■■ 1 glazed front door with a lock, key nº 333.
■■ 1 rear plate, reference: NSYOPB6UTPN to NSYOPB21UTPN.
■■ 4 depth-adjustable 19" uprights. Additional uprights available.
■■ 4 castors, reference NSYRUFOPB.
■■ Option of installing a plinth instead of the castors.
100 | Actassi
04.2012 | Network Connectivity
OPB
Actassi Enclosures
Mounting accessories
Rear blanking plate
■■ Blanking plate made from sheet steel, powder paint, leather-grain finish,
RAL 7035 light grey epoxy-polyester.
■■ Delivered with the fixings required for installation.
NSYOPB6UTPN
Number of U
Reference
6
9
12
15
18
21
NSYOPB6UTPN
NSYOPB9UTPN
NSYOPB12UTPN
NSYOPB15UTPN
NSYOPB18UTPN
NSYOPB21UTPN
Additional 19" uprights
■■ Batch of two 19" uprights delivered with the fixings required for installation.
■■ Material: zinc-coated sheet steel, 20/10 mm thick.
■■ Maximum load: 3 kg/U; max. 50 kg per enclosure.
■■ Unit marking.
NSYOPB6UF
Number of U
Reference
6
9
12
15
18
21
NSYOPB6UF
NSYOPB9UF
NSYOPB12UF
NSYOPB15UF
NSYOPB18UF
NSYOPB21UF
19" uprights, rear, 2 U
■■ Allows to save 2U on the front and to fix Power Distribution Unit on the back of the enclosure
■■ Batch made up of 2 partial 2 U 19" uprights delivered with the
fixings required for installation.
■■ It is fixed to the rear of the enclosure.
■■ It allows the installation of products in 19" format.
■■ Height adjustment with a step of 44.45 mm (1 U).
■■ Material: zinc-coated sheet steel.
Number of U
Reference
2
NSYSSOPB
NSYSSOPB
Cable support for enclosure, rear
■■ Allows to secure and guide the cables on the back of the enclosure
■■ Fixed to the rear of the enclosure to support and fix the cables.
■■ Height adjustable with a step of 44.45 mm (1 U).
■■ Material: zinc-coated steel.
■■ Delivered with the fixings required for installation.
Cable support
NSYSPBOPB
NSYSPBOPB
Network Connectivity | 04.2012
Actassi | 101
Actassi Enclosures
OPB
Roof accessories
Top or bottom blanking plate
■■ Plain blanking plate.
■■ Material: zinc-coated steel sheet.
■■ Delivered with the fixings required for installation.
NSYEC300
Reference
NSYEC300
Blanking plate with brush gasket
■■ Fixing to the top or bottom openings of the enclosures.
■■ Material: zinc-coated steel sheet.
■■ Delivered with the fixings required for installation.
NSYECP300
Dimensions (mm)
Reference
35 x 300
NSYECP300
Total brush gasket
■■ It is fixed to the top and bottom cable entries.
NSYECPT300
Dimensions (mm)
Reference
100 x 300
NSYECPT300
Top or bottom blanking plate with
ventilation louvres
NSYECAV300
■■ Fixing to the top or bottom openings of the enclosures.
■■ Material: zinc-coated sheet steel.
■■ Delivered with the fixings required for installation.
Reference
NSYECAV300
Top or bottom blanking plate with 2 fans
■■ 2 fans installed and wired to on the terminal block, including a protection grille. A power supply cable of 2 m in length is supplied connected.
■■ Free flow of 35 m3/h each.
■■ Fixing to the top or bottom openings of the enclosures.
■■ Material: zinc-coated sheet steel.
■■ Delivered with the fixings required for installation.
■■ Sound level: 35 dB (A).
■■ Thermostat NSYCRTM1UVTG (option)
NSYECVT300
Reference
NSYECVT300
102 | Actassi
04.2012 | Network Connectivity
Actassi Enclosures
OPB
Base accessories
Levelling feet
■■ Delivered with the fixings required for installation.
■■ Require drilling of the enclosure at the knock-out point for direct installation.
■■ Batch of 4 parts.
Reference
NSYPNOPB
NSYPNOPB
Wheels
■■ Delivered with the fixings required for installation.
■■ Require drilling of the enclosure at the knock-out point for direct installation.
■■ Installation possible on the plinth.
■■ Batch of 4 parts.
Reference
NSYRUFOPB
NSYRUFOPB
Plinths
■■ Material: sheet steel, 15/10 mm thick, powder paint, leather grain finish,
RAL 7011 dark grey epoxy-polyester.
■■ Height 100 mm.
■■ Delivered with the fixings required for installation.
■■ Removable surfaces.
■■ Knock-out entries on the side and rear surfaces for cable entry.
Dimensions (mm)
NSYZUN65OPB
Width
Depth
600
600
600
400
500
600
Reference
NSYZUN64OPB
NSYZUN65OPB
NSYZUN66OPB
Brush gasket for the cable entries
through the plinth
■■ It is fixed to the knock-out areas for the cable entries.
■■ Delivery as a unit.
NSYJPSVD
Entry width (mm)
Reference
75 x 400
NSYJPSVD
Wall-mounting kit for the enclosures
■■ Allows wall-mounting of enclosures from 6 U to 29 U, with a depth of 600 mm.
■■ Maximum load inside the enclosure: 50 kg.
■■ The kit includes 2 brackets.
■■ Maximum load inside the rack: 100 kg.
100
SCALE 0.100
Enclosure depth (mm)
SCALE 0.100
600
Reference
SCALE 0.100
NSYCFRS
59
250
5
NSYCFRS
Network Connectivity | 04.2012
Actassi | 103
Actassi Enclosures
OPB
Equipment supports
Partial fixed slides
■■ Allows to support the back of the 19" switch, PABX or server in using
only 2 19" uprights
■■ Batch of 2 slides for supporting a drawer, a shelf or 19" hardware.
■■ Fixing by attachment on the front 19" uprights.
■■ Material: zinc-coated steel.
■■ Acceptable load: 15 kg.
Width (mm)
Reference
140
NSYGF140OPB
NSYGF140OPB
Fixed slides
■■ Allows to support heavy switch, PABX or server in using 4 19" uprights
■■ Batch of 2 slides for supporting a drawer, a shelf or 19" hardware.
■■ Fixing by attachment between the front and rear 19" uprights.
■■ Material: zinc-coated steel.
■■ Heel of 0 mm.
■■ Acceptable load: 15 kg.
Centre-to-centre distance (mm)
Reference
200
NSYGF200OPB
NSYGF200OPB
Rear cable support on 19" uprights
■■ Fixing to the rear of the 19" uprights to support the cables.
■■ Material: zinc-coated steel.
■■ Delivered with the fixings required for installation.
Reference
NSYSRCOPB
NSYSRCOPB
104 | Actassi
04.2012 | Network Connectivity
Actassi floor-standing enclosures
Are you looking for an enclosure that is robust and very quick to install? Actassi VDA
should be your choice. Smart details and a possibility to choose pre-installed accessories
reduce the installation time. If you need a top-of-the-line server enclosure, Actassi VDS
is difficult to beat. It can be mounted with up to 750 kg of 19” components, and the microperforated door ensures superior air flow (above 80%).
Actassi BTR
Technical rack
Network Connectivity | 04.2012
Actassi VDA-B
Cabling enclosure
Actassi VDS
Server enclosure
Actassi | 105
Actassi Enclosures
BTR
Technical rack
Tempory installation
Introduction
Heights of 24 U and 42 U
Applications
■■ Test rack.
■■ Mixing rack.
■■ Prototype rack.
To be made up of
■■ 1 steel plinth, 600 × 600 mm.
■■ Two 19" uprights, height of 24 or 42 U.
■■ 1 steel cross rail delivered with the 19" uprights.
■■ The fixings required for installation delivered with the 19" uprights.
Advantages
■■ Shorter assembly time.
■■ Simple handling of the unit by a single operator.
■■ Reduced storage space.
■■ Minimum external dimensions.
■■ Quick coupling.
■■ Option of installing handling castors.
■■ Acceptable static load: 150 kg.
■■ Certifications : In compliance with the directive RoHs, with the 19" standard
IEC60297-3-100 and EIA-310D
106 | Actassi
Nº of usable U
Batirack plinth ref.
19" upright and cross-rail kit
24 U
42 U
NSYZUN66BTR
NSYZUN66BTR
NSYBTR24U
NSYBTR42U
04.2012 | Network Connectivity
Actassi Enclosures
VDA
Easy to install and to integrate
19" Cabling enclosure
Adaptable
The Configured offer allows you to clad the rack
according to your needs:
• 2 framework models,
• 13 door models,
• 2 side panel models.
Aesthetics and
customisation
• bi-colour: RAL 7035
light grey and RAL 7011
dark grey,
Saves time
All the doors can be
installed and removed
quickly. The cladding can
be installed and removed
by a single operator. The
feet can be adjusted from
the inside.
Rigidity and
sturdiness
400 kg of acceptable
static load.
Network Connectivity | 04.2012
Actassi | 107
Actassi Enclosures
VDA
Easy to install and to integrate
19" Cabling enclosure
Panels and doors can be
installed and removed
quickly by a single operator.
The ventilation is adjustable and does not take
up any units (1 to 9 fans).
108 | Actassi
Ergonomics
The routing of the cable
glands is easier:
• Knock-out side cable
glands at top and
bottom.
• Knock-out rear cable
glands at top and
bottom.
• Large opening on the
roof, offset towards
the rear and equipped
with a removable plate.
Allows the integration
of live equipment at
the top and the entry of
cables by the rear.
• Large opening at the
bottom.
Accessories
The central openings on
the roof and the base
support multiple blanking plate combinations
(plain, with brush gasket
or ventilated).
Optional installation of
the blanking plates with
the roof plate thanks to
the roof stand-offs.
A harmonious design
With modern aesthetics:
strip, handle, hinge, in
rounded shape, RAL
7011 dark grey.
Security
The latches of the
panels can be equipped
with a key locking system (the key is identical
for all the doors).
Smart
The pivot and guide
system allows the panels
to be returned to their
place quickly, with maximum security.
Practical
Marking of the units on
the front panel and on
the side for quick installation of the equipment.
The 19" uprights are
easily depth-adjustable
on the site.
Adaptable ventilation
The roof ventilation is
depth-adjustable and
does not take up any
units.
Option of installing 1 to
9 fans according to the
size of your enclosure.
PB501534
Innovating
The side cable entry is
the most ergonomic and
efficient solution on the
market. The top and bottom openings, flush with
the structure, allow the
strands to be prepared
before installing the rack.
These openings also
allow for easy maintenance and are closed
when the side panels are
installed.
04.2012 | Network Connectivity
VDA-B
Actassi Enclosures
Simple and functional
Introduction
VDA-B rack
■■ Designed for circulation applications with switches and routers.
■■ 6 heights: 24 U, 29 U, 33 U, 38 U, 42 U and 47 U.
■■ 2 widths: 600 and 800 mm.
■■ 3 depths: 600, 800 and 1000 mm.
■■ Acceptable static load: 400 kg.
■■ Dynamic load: 250 kg.
■■ Color :
– Light Grey (RAL7035) for lining
– Dark Grey (RAL7011) for framework
■■ Ingress Protection : IP20
– Object size protected against > 12,5mm
– No liquid protected
■■ Impact Protection : IK08
– Impact energy = 5 joules
■■ Certifications : In compliance with the directive RoHs, with the 19" standard IEC60297-3-100 and EIA-310D
Rack composition
■■ Top and bottom frames, mechanically assembled by Torx screws to the vertical structure uprights, thus forming a rigid framework.
■■ Cut-out roof, closed with a removable blanking plate.
■■ Glazed reversible front door, 4 mm Securit® glass, opening to 180°, 1-point lock with a key n° 333. Hinges on the right as standard.
■■ Rear panel with quick installation and removal, locking by latches.
■■ Side panels with louvres, with quick installation and removal, locking by latches.
■■ Top and bottom side cable glands flush with the structure.
■■ Top and bottom side knock-out areas for cable entry, with a width of 800 mm.
■■ Large opening on the bottom and large knock-out area on the rear for cable entry.
■■ Levelling feet installed.
■■ Two 19" uprights made from treated steel, installed 100 mm back from the front surface and depth-adjustable in steps of 25 mm.
■■ Delivered on a pallet covered with film.
Composition of the rack without side panels
■■ Exactly the same composition as the above rack, but without the side panels.
■■ Coupling kit not supplied.
VDA-B racks, RAL 7035 Light Grey
Handling castors
Cable-gland
trim
NSYZUN66VDA
NSYRUFVDA
-
NSYZUN68VDA
NSYRUFVDA
-
NSYBR9F42
NSYZUN66VDA
NSYRUFVDA
-
NSYVDA42U68B
NSYBR9F42
NSYZUN68VDA
NSYRUFVDA
-
NSYVDA42U86B
NSYBR9F42
NSYZUN66VDA
NSYRUFVDA
NSYPV42
Number
of U
Height
(mm)
Width
(mm)
Depth
(mm)
Rack with side
panels
19" uprights
100-mm plinth
24U
1200
600
600
NSYVDA24U66B
NSYBR9F24
24U
1200
600
800
NSYVDA24U68B
NSYBR9F24
42U
2000
600
600
NSYVDA42U66B
42U
2000
600
800
42U
2000
800
600
42U
2000
800
800
NSYVDA42U88B
NSYBR9F42
NSYZUN88VDA
NSYRUFVDA
NSYPV42
42U
2000
800
1000
NSYVDA42U810B
NSYBR9F42
NSYZUN810VDA
NSYRUFVDA
NSYPV42
Network Connectivity | 04.2012
Actassi | 109
Actassi Enclosures
Data Center Patching Frame
Range
Overhead 19" Patching Frame 4U
■■ 19” frame
■■ Designed to be mounted in a mesh tray or cable ladder to provide 4U patching
positions and to save space in the enclosure below.
■■ 4U height.
■■ In compliance with the directive RoHS and with 19” standards EIA 310-D and IEC
60297-3-100.
■■ CE certified.
■■ Metal.
■■ Dimensions: 500mm x 350mm x 160mm.
■■ Color is Raven Black.
■■ Holds up to 15 Kgs.
■■ Equipped with two cord managers that secure the bend radius of the cords going
down to the enclosure, It includes 4 self-grip of 30cm.
■■ Equipped with a big label holder to facilitate readiness from the ground.
Description
Overhead 19” patching frame 4U*
Reference
VDIM33174
* Available from End 2012
VDIM33174
Example of mounting
Stand-alone mounting
110 | Actassi
Mounting in a cable ladder
Mounting at the bottom of a
mesh tray
04.2012 | Network Connectivity
Mounting on the side of a
mesh tray with a quick fitting
device
Actassi Enclosures
VDS
19" server enclosure
Robust and ventilated
Ventilated:
The front and rear doors
are microperforated on
the width of the 19" uprights to channel the air
flows onto the equipment.
They allow above 80% of
air through for optimum
ventilation of the live
components that equip
the 19" rack.
Rigidity and
robustness:
750 kg of acceptable
static load.
Vertical cable manager
(as option)
Efficient vertical cable
managers can be used
to duct, support and hide
fibre and copper cables
in improving airflow.
Adaptation and
customisation:
The configured offer allows you to clad the rack
according to your needs:
• 2 framework models.
• 13 door models (microperforated double door,
etc.).
• 2 side panel models.
Network Connectivity | 04.2012
Actassi | 111
Actassi Enclosures
VDS
The ventilation is adjustable and does not take up
any units (1 to 9 fans).
Innovating:
The side cable entry is
the most ergonomic and
efficient solution on the
market.
The top and bottom
openings, flush with
the structure, allow the
strands to be prepared
before installing the rack.
These openings also
allow for easy maintenance and are closed
when the side panels are
installed.
Ergonomic:
The routing of the cable
entries is easier:
• Side cable entries at top
and bottom, pre-cut.
• Rear cable entries at the
bottom, pre-cut.
• Large opening on the
roof, offset towards the
rear and equipped with a
blanking plate.
• Allows the integration of
live equipment at the top
and the entry of cables
from the rear.
• Large opening at the
bottom.
Adaptable ventilation:
The roof ventilation is
depth adjustable and
does not result in the
loss of any units. Option
of installing 1 to 9 fans
according to the size of
your enclosure.
Security:
The latches of the panels
can be equipped with a
key locking system (the
key is identical for all the
doors).
Smart:
The pivot and guide system allows the panels to
be returned to their place
quickly, with maximum
security.
Practical:
Marking of the units on
the front panel and on the
side for quick installation
of the equipment. The 19"
uprights are easily depthadjustable on the site.
Saves time:
All the doors and panels
can be installed and
removed quickly. The
cladding can be installed
and removed by a single
person. The feet can be
adjusted from the inside.
Accessories:
The central openings on
the roof and the base
support allow multiple
blanking plate combinations (plain, with brush or
ventilated).
Possibility of installing
the blanking plates with
the roof plate thanks to
the roof stand-offs.
Panels and doors can be
installed and removed
quickly by a single operator.
112 | Actassi
19" server enclosure
Robust and ventilated
04.2012 | Network Connectivity
Actassi Enclosures
VDS
19" server
Robust and ventilated
Introduction
Technical characteristics
■■ Folded and welded sheet-steel enclosure, textured, RAL 9011 black
epoxy-polyester powder paint.
■■ Earth continuity guaranteed, according to the standard.
■■ Allowed air flow above 80%
■■ Acceptable static load: 750 kg.
■■ Color:
– Black (RAL9011)
■■ Ingress Protection : IP20
– Object size protected against > 12,5mm
– No liquid protected
■■ Impact Potection : IK10
– Impact energy = 20 joules
■■ Certifications: In compliance with the directive RoHs, with the 19" standard IEC60297-3-100 and EIA-310D
Rack composition
■■ T
op and bottom frames, mechanically assembled by Torx screws to the vertical structure uprights, thus forming a rigid framework.
■■ Base without blanking plate (page XX).
■■ Cut-out roof, closed with a blanking plate with dismountable brush gasket.
■■ Reversible microperforated front and rear door, opening to 180°, closure at 2 points with a handle and a key nº 333. Hinges on the right as standard.
■■ Side panels with no louvres, with quick installation and removal, closing by latches.
■■ Top and bottom side cable entries flush with the structure.
■■ Top and bottom side knock-out areas for cable entry, with a width of 800 mm.
■■ Large opening on the bottom and large knock-out area on the rear for cable entry.
■■ Levelling feet installed.
■■ Four 19" uprights made from treated steel, installed 100 mm back from the front plate and depth-adjustable in steps of 25 mm.
■■ Earthing kit installed.
■■ Delivered on a pallet covered with film.
Composition of the rack without side panels
■■ Exactly the same composition as the above rack, but without the side panels.
■■ Coupling kit not supplied.
■■ In the event of coupling, use coupling kit ref. NSYCUNVDA and brush gasket (ref.
NSYCUNPL600, NSYCUNPL800 or NSYCUNPL1000) to close the cable entry left
by the 2 side panels.
Selection guide
Number of U
42U
42U
42U
Network Connectivity | 04.2012
Ext. dimensions (mm)
Height
Width
Depth
2000
2000
2000
600
800
800
1000
  800
1000
Rack
NSYVDS42U610N
NSYVDS42U88N
NSYVDS42U810N
Actassi | 113
Actassi Enclosures
VDA/VDS
Accessories
EA accessories
Locking system (P1)
■■ Allows the closure of a side panel and the rear panel.
■■ Lock with key n° 333 with escutcheon plate.
■■ It is installed on the opening latches of the side and rear panels.
■■ Delivery of 2 locks per panel.
Reference
NSYSTVDA
NSYSTVDA
Coupling kit (R1)
■■ Kit to be used when coupling two racks side by side.
■■ Kit made up of 4 flanges and the fixings required for assembly.
Reference
NSYCUNVDA
NSYCUNVDA
Vertical trim strips with cable entries (H2)
■■ For enclosures with a width of 800 mm only.
■■ Side cut-outs allowing the entry of cables every 250 mm. Knock-out entries on the
front plate every 250 mm.
■■ Assembly on the framework uprights providing aesthetic continuity between the
framework and the 19" uprights positioned at least 100 mm away from the door.
■■ RAL 7011 dark grey paint.
■■ Cable-protection strips (not supplied) to be ordered separately. See
page XX.
■■ Dismounting by 1/4-turn screws.
■■ Kit made up of 2 trim strips.
Number of U
Reference
42U
NSYPV42
NSYPV42
Handling wheels (M3)
■■ Batch of 4 swivel castors, 2 of which are equipped with a locking system.
■■ Direct fixing under the bottom frame of the rack by M12 screws.
■■ Height of the castors: 105 mm.
Acceptable load
Reference
250 kg/4 castors
NSYRUFVDA
NSYRUFVDA
114 | Actassi
04.2012 | Network Connectivity
Actassi Enclosures
VDA/VDS
EA accessories
Roof and base accessories
Installation supports
Plain blanking plate (J1) (K1)
■■ Fixing on the internal surface of the base or roof.
■■ Can be combined with other types of blanking plates.
■■ Treated sheet steel.
■■ Delivered with the fixings required for installation.
Reference
NSYEC440
NSYEC440
Blanking plate with brush gasket (J2) (K2) (L1)
■■ Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of the reduced rear door.
■■ Can be combined with other types of blanking plates.
■■ Treated sheet steel.
■■ Delivered with the fixings required for installation.
Dimensions (mm)
75 x 400 mm
NSYECP440
Reference
NSYECP440
Blanking plates with or without fans
Ø 120 mm (J3) (J4) (L2) (L3)
NSYECVT2V440
■■ Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of the reduced rear door.
■■ Equipped with 2 fans, free flow of 170 m3/h each, 220 V-50/60 Hz, installed wired with terminal board. A 3-m power cord is supplied, installed.
■■ Can be combined with other types of blanking plates.
■■ Treated sheet steel.
■■ Delivered with the fixings required for installation.
■■ Noise level: 34 dB (A).
■■ To use fans with UK PDU’s, order UK adaptor Ref : NSYAPUFRUK
Dimensions (mm)
Reference
NSYECVT2V440
With 2 fans
Additional 19" uprights
■■ Assembly on the depthwise supports.
■■ Depth adjustable in steps of 25 mm.
■■ Kit made up of 2 uprights and the fixings required for assembly.
■■ 9.5-mm square holes in the front panel.
Number of U
Reference
24U
42U
NSYBR9F24
NSYBR9F42
NSYECVT2V424 /
NSYECVT2V440
Network Connectivity | 04.2012
Actassi | 115
Actassi Enclosures
Universal accessories
Earth connection
Fixing components
Earthing strip (Y)
NSYAEECS
■■ Two models available:
■■ – Insulated: 10 x 5 mm brass bar with 40 connection points by screws for lugs (screws not installed).
■■ Fixing to the 19" rack or to the framework.
■■ Length: 480 mm.
■■ Delivered with fixings.
Insulated
Reference
NSYAEECS
Yes
NSYAEEC1UF
NSYAEEC1UN
Earthing kit for Actassi OPB / VDC
■■ To earth all the covering components.
Reference
NSYCTOPB
Earthing kit for Actassi VDA / VDS
NSYCTOPB
■■ Kit for earthing the cladding pieces of the enclosure.
■■ Assembly on all the doors of the enclosure to comply with standard IEC62208, Section 9.10 regarding the continuity of the protection circuit.
■■ Brass and copper lugs.
■■ Green-yellow PVC insulating sheath.
Note: It is up to the installer to make sure earth continuity and the earth connections are
guaranteed.
Reference
NSYCTVDA
Fixings for 19" rack
■■ They allow 19" accessories to be mounted.
■■ Caged nut compatible with 8.5 x 8.5 mm and 9.5 x 9.5 mm holes.
Batch of
  50
Name
Reference
M6 screws + washers +
nuts
NSYGFR95M65
NSYGFR95M65
116 | Actassi
04.2012 | Network Connectivity
Actassi Enclosures
Universal accessories
Shelves
Fixed perforated and plain 19" trays, 1 U
■■ Fixing by attachment without tools between the front and rear 19" uprights.
■■ Sheet steel or RAL 7016 grey paint.
■■ Acceptable load: 100 kg.
NSYBBF1U40PG / NSYBBF1U60PG
Rack depth (mm)
Fixing centre-to-centre
distance (mm)
References of RAL 7016
perforated 19" trays
600-800-1000
800-1000
258 (1)
458 (1)
NSYBBF1U40PG
NSYBBF1U60PG
(1) –100 ...+50 mm, adjustable in steps of 25 mm.
Telescopic perforated and plain 19" trays, 1 U
■■ Fixing by attachment without tools between the front and rear 19" uprights.
■■ Fixing on the telescopic slides supplied.
■■ Sheet steel or RAL 7016 grey paint.
■■ Acceptable load: 45 kg.
Rack depth (mm)
NSYBBT1U40PG / NSYBBT1U60PG /
NSYBBT1U80PG
Fixing centre-toReferences of RAL 7016
centre distance (mm)
perforated 19" trays
600-800-1000
800-1000
1000
NSYBBT1U40PG
NSYBBT1U60PG
NSYBBT1U80PG
258 (1)
458 (1)
658 (1)
(1) Slides delivered with the tray.
(2) –100 ...+50 mm, adjustable in steps of 50 mm.
Handle for telescopic 19" tray
■■ Plastic material, RAL 7011 dark grey.
■■ Delivered with fixings.
Reference
NSYASR3U
NSYASR3U
1 U fixed 19" tray
■■ Fixing to the front or rear uprights of the 19" rack.
■■ Heel of 5 mm.
■■ Sheet steel or RAL 7016 grey paint.
■■ Acceptable load: 2 U 20 kg.
NSYBF2U25PG
Number of U
Depth (mm)
Load (kg)
Reference RAL 7016
2U
250
20
NSYBF2U25PG
2 U telescopic 19" tray
■■ Fixing to the front uprights of the 19" rack.
■■ Sheet steel or RAL 7016 grey paint.
■■ Acceptable load: 5 kg.
■■ Delivered with the telescopic slides assembled.
■■ Heel of 5 mm.
NSYBT2U25PG
Network Connectivity | 04.2012
Number of U
Depth (mm)
Load (kg)
Reference RAL 7016
2U
250
5
NSYBT2U25PG
Actassi | 117
Actassi Enclosures
Universal accessories
Electrical power distribution rails
PDU´S
UTE - 16A/230V~ with pin-earthed outlets
■■ Sockets set at 35° with child protection
■■ Aluminium profile silver - heigh 1 U
■■ Material: fibreglass polyamide plastic with fire resistance to 850 °C.
■■ equipped with power cord (3G 1.5 mm2) type H05 VVF, equipped with a mould
right
angle plug with earthing contact system
■■ According to NFC61314, IEC60884 and NBNC61112-1 standards
■■ Could be used in : France, Belgium, Poland, Monaco, Slovakia, Czech Republic
Width
(mm)
Depth (mm)
Type
   19"
44
A
NSYAPU19F9
8 sockets outlets with recessed
green led switch
   19"
44
B
NSYAPU19F8S
6 sockets outlets with circuit breaker
16A
   19"
76
C
NSYAPU19F6CB
Number of sockets
19" Adapted
9 sockets outlets
NSYAPU19F9
NSYAPU19F8S
UTE
NSYAPU19F6CB
■■ A: Rail of sockets without protection.
■■ B: Rail of sockets with recessed green LED switch.
■■ C: Rail of sockets with circuit-breaker C16 type C60N 16 A curve C.
118 | Actassi
04.2012 | Network Connectivity
Actassi Enclosures
Universal accessories
Electrical power distribution rails
PDU´S
VDE - 16A / 230V~ with side-earthed outlets
■■ Sockets set at 35° with child protection
■■ aluminium profile silver - heigh 1 U
■■ Material: fibreglass polyamide plastic with fire resistance to 850 °C.
■■ equipped with power cord (3G 1.5 mm2) type H05 VVF, equipped with a mould
right angle plug with earthing contact system
■■ According to DIN49 440, VDE0620-1, IEC60884 and UNE20315 standards
■■ Could be used in : Germany, Austria, Netherlands, Italy (partial), Spain, Portugal,
Sweden, Norway, Finland, Slovenia, Romania, Hungary, Afghanistan, Andorra,
Vatican City, San Marino, Estonia, South Korea, Indonesia, Iceland, Chile, Bulgaria
Width
(mm)
Depth
(mm)
Type
VDE
   19"
44
A
NSYAPU19S9
8 sockets outlets with recessed
green led switch
   19"
44
B
NSYAPU19S8S
6 sockets outlets with 6 circuit
breaker 16A
   19"
76
C
NSYAPU19S6CB
Number of sockets
19" Adapted
9 sockets outlets
NSYAPU19S9
NSYAPU19S8S
NSYAPU19S6CB
UK - 13A/240V~ with BS standard outlets
■■ Sockets set at 90° with child protection
■■ aluminium profile silver - heigh 1 U
■■ Material: fibreglass polyamide plastic with fire resistance to 850 °C.
■■ equipped with power cord (3G 1.5 mm2) type H05 VVF, equipped with a mould
right angle plug with earthing contact system
Width
(mm)
Depth (mm)
Type
   19"
44
A
NSYAPU19UK7
6 sockets outlets with recessed
green led switch
   19"
44
B
NSYAPU19UK6S
6 sockets outlets with circuit
braker13A
   19"
44
C
NSYAPU19UK6CB
Number of sockets
19" Adapted
7 sockets outlets
NSYAPU19UK7
NSYAPU19UK6S
UTE
NSYAPU19UK6CB
■■ A: Rail of sockets without protection.
■■ B: Rail of sockets with recessed green LED switch.
■■ C: Rail of sockets with circuit-breaker 16 A.
Network Connectivity | 04.2012
Actassi | 119
Universal accessories
Actassi Enclosures
Cable management
(compatible only with floor standing enclosures)
Guides (X)
NSYGCA1010
NSYGCA46
NSYADGCA
NSYGCA410
■■ Mounting on:
■■ The 19" uprights (laterally).
■■ All the cable-support cross-rails.
■■ At the rear of the 19" shelves.
– On the framework uprights, with the help of intermediate support reference
NSYADGCA.
■■ Material: plastic, RAL 7035 light grey.
■■ Guides and supports: batch of 10.
Dimensions (mm)
Reference
  40 x 60
  40 x 100
100 x 100
NSYGCA46
NSYGCA410
NSYGCA1010
Performa Zinc+ Mesh trays prepared for Actassi VDA / VDS 42U enclosures (W)
■■ 2 models available with depths of 35 or 70 mm; width of 200 mm and length of
1800 mm.
■■ Made from high-quality steel wires with an innovative surface coating for improved
corrosion resistance.
■■ Delivered with fixing accessories.
NSYBPC5
120 | Actassi
Usable depth (mm)
Reference
70
NSYBPC5
A summary of the Performa Zinc+ benefits
■■ A new innovative surface coating for improved corrosion resistance, aesthetic finish and reduced environmental impact
■■ Double transversal wires for outstanding working load
■■ Reduced installation time with screw-less accessories
■■ Patented solution for safety edges
■■ Delivered in a protective film, colour coded for easy identification
04.2012 | Network Connectivity
Actassi Enclosures
Universal accessories
Cable management
Thermal-management
1 U 19" front panels with metal guides
■■ Channels the cables over the front panel of the rack.
■■ Fixing to the 19" rack.
■■ Sheet steel, RAL 7016 grey paint.
NSYCRTM1U32B
Number of guides
Vert.
Horiz.
RAL 7016 cable-guide
reference
4
0
NSYCRTM1U40BG
1 U 19" front panel with cable-gland openings
NSYCRTM1U2G
■■ Fixing on the 19" uprights.
■■ Openings protected by a gasket.
■■ Sheet steel RAL 7016 grey paint.
RAL 7016 reference
NSYCRTM1U2G
1 U 19" front panels with cable-gland and brush gasket
■■ Fixing on the 19" uprights.
■■ Sheet steel RAL 7016 paint.
■■ 150 mm cable support.
NSYCRTM1U1P
Type
RAL 7016 reference
With cable support at the rear
NSYCRTM1U1PG
1 U 19" front panel with insulating guides
NSYCRTM1U5GCA
■■ Channels the cables over the front panel of the rack.
■■ Fixing on the 19" uprights.
■■ Steel front panel, RAL 7035 light grey paint.
■■ Equipped with 5 guides (reference NSYGCA46) in horizontal, vertical and 45° positions.
Reference
NSYCRTM1U5GCA
1 U 19" front panel with ventilation switch and thermostat
■■ Direct fixing to the 19" rack.
■■ Switch with LED.
■■ Thermostat 0 ... +60 °C, In 5 A/250 V.
■■ Front panel made from RAL 7016 sheet.
Reference RAL 7016
NSYCRTM1UVTG
NSYCRTM1UVTG
Network Connectivity | 04.2012
Actassi | 121
The customised offer
Do you want to have other enclosures than standard? No problem. With Actassi enclosures
it's possible to customize colour, accessories, specific lining etc according to your personal
needs.
Two levels of customisation
At Schneider Electric we have developed two levels of customised services based on
more than 50 years of experience in the market :
> Configured offer (standard, modified)
> Specific offer (custom-built enclosures).
Flexibility
Several types of
side panels
Safety
Defined thermal
management
Time-saving
Factory suite
assemblies
Aesthetics
Colour
Mounting
Accessories
mounted in our
factories
Efficiency & ergonomics
Several types of doors
We perform machining,
mounting of accessories
and painting.
We manufacture customised solutions with our
industrial tools.
Example: cut-outs made
before painting.
.
122 | Actassi
04.2012 | Network Connectivity
Examples of customised solutions
Configured offer
Make your own definition based on our standard
claddings.
Configured
Example: Actassi VDS enclosure in RAL 9011
Equipped with:
• Double Front door with two-points locking system.
Airflow above 80%
• Double Rear door with two-points locking system.
Airflow above 80%
• Two side-doors with locks
• Roof equipped with 6 fans and 1 brush-entry cables
Specific offer
Built exactly according to your needs
Example: Actassi VDA
Specific
One specific VDA enclosure splitted in four compartments
to allocate different cabling zones to different customers.
This enclosure is delivered equipped, machined and
ready to use.
Network Connectivity | 04.2012
Actassi | 123
Actassi Enclosures
P&S Customisation
services
Customer-specific solutions
Specific
Example of realisations
124 | Actassi
Colocation 19”
enclosure
Enclosure separated in 4
parts to give different
access to each customer.
Each hosted customer
has his own secured
access and cannot make
some operation to the
other part of the enclosure
Branded 19” enclosure
equipped with saloon
glazed doors:
Enclosure totally
customized with the
customer requirements.
42U enclosure equipped
with double glazed doors
permits to open the doors
when you don’t have
space.
Ventilated 19” enclosure
with fans mounted on
the doors :
Enclosure dedicated to
extract a lot of heat.
Mainly dedicated to server
application.
This configuration permits
to ensure the stability of
the installation
19” enclosure – Depth
400mm
19” enclosure with a very
limited depth (Depth
400mm) for cabling
application.
Required by the customer
to reduce the size of the
installation.
Wall-mounted enclosure
– Depth 1000 mm
Enclosure totally
customized with the
customer requirements.
12U – Width 600mm and
Depth 1000mm.
Racks structure merged
with a middle zone
cabling:
Totally dedicated for
cabling, this structure
permits to easily manage
the cables and to give the
best access to install the
components.
04.2012 | Network Connectivity
Technical information
Actassi Enclosures
Degree of protection
Standard IEC 60364-5-51 lists and codifies a large number of external influences to
which electrical installations can be subjected, including the presence of water, solid
objects, shocks, vibrations, corrosive substances, etc.
IP code
Standard IEC 60529 (IP code, February 2001) indicates the degrees of protection
provided by an enclosure for electrical devices against access to hazardous parts,
against penetration of solid foreign objects and against penetration of water.
These standards do not apply for the protection against the risks of explosion or
conditions such a humidity, corrosive vapour, fungus or vermin.
The IP code is made up of two characteristic numerals and can include an additional
letter when the actual protection for persons against access to the hazardous parts is
better than that indicated by the first numeral.
The first numeral characterises the protection provided against the ingress of solid
foreign objects and the protection of persons.
The second numeral characterises the protection provided against the ingress of
water with harmful effects.
1st numeral 2nd numeral
Protection of persons
Protection against ingress of
solid objects
1
1 Protected against
access with back of
hand
Protection against
solid foreign objects
larger than 50 mm
1
Protected against
vertically dripping
water (condensation)
2
Protected against
access with a finger
Protection against
solid foreign objects
larger than 12.5 mm
2
Protected against
dripping water up to
15° from vertical
3
Protected against
access with a tool
Protection against
solid foreign objects
larger than 2.5 mm
3
Protected against
spraying water up to
60° from vertical
4
Protected against
access with a wire
Protection against
solid foreign objects
larger than 1 mm
4
Protected against
splashing water from
all directions
5
Protected against
access with a wire
Protected against dust
(dust protected)
5
Protected against
water jets from all
directions
6
Protected against
access with a wire
Dust tight
6
Protected against
powerful water jets
from all directions
7
Protected against the
effects of temporary
immersion in water
8
Protected against the
effects of continuous
immersion in water
Network Connectivity | 04.2012
2nd numeral Protection against ingress of
water
Actassi | 125
Actassi Enclosures
Technical information
IK code
Standard IEC 62262 defines an IK code characterising the capacity of products to
resist mechanical impacts from all sides.
IK code
Impact energy (joules)
01
0.14
02
0.2
03
0.35
04
0.5
05
0.7
06
1
07
2
08
5
09
10
10
20
IK codes can be selected according to the risks of impacts on a given site.
126 | Actassi
Site
Recommended IK
No risk of major impact
Technical premises
07
Significant risk of impact that
can damage devices
Hallways
08 (switchboard with door)
Maximum risk of impact that
can damage the switchboard
Workshops
10
04.2012 | Network Connectivity
LSB02659© Schneider Electric – All rights reserved
* Make the most of your energy
Schneider Electric Industries SAS
35 rue Joseph Monier
92500 Rueil-Malmaison
France
www.schneider-electric.com
As standards, specifications and designs change from time to time, please ask for confirmation
of the information given in this publication.
This document has been printed
on ecological paper
Publishing: Schneider Electric Industries SAS
Design:
Illustrations:
Photos:
Printing:
07-2012