Avenview HDMI-C5-IR-SET Specifications

HDMI 1.3 Matrix Switch Receiver over
CAT5 with IR Pass-Through
Model #: HDMI-C5SW-R
© 20010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
www.avenview.com
1
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1
Important Safeguards ............................................................................................................ 3
1.2
Safety Instructions ................................................................................................................. 3
1.3
Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4
Introduction ........................................................................................................................... 4
1.5
Package Contents................................................................................................................... 6
1.6
Before Installation.................................................................................................................. 6
1.7
Panel Description ................................................................................................................... 7
1.7.1 HDMI-C5SW-R ....................................................................................................................... 7
1.8
Installation (HDMI-C5SW-R) .................................................................................................. 8
Section 2: Specifications......................................................................................................................... 9
2
Section 1: Getting Started
1.1
Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover


Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
 Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
 Repair or attempted repair by anyone not authorized by us.
 Any damage of the product due to shipment.
 Removal or installation of the product.
 Causes external to the product, such as electric power fluctuation or failure.
 Use of supplies or parts not meeting our specifications.
 Normal wear and tear.
 Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.
1.2
Safety Instructions
The Avenview HDMI-C5SW-R, HDMI 1.3 Matrix Switch Receiver over CAT5 has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all electronic
equipment’s, the HDMI-C5SW-R should be used with care. Read the following safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.




Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards


Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.


3
1.3
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4
Introduction
The Avenview HDMI-C5SW-R, HDMI 1.3 Matrix Switch Receiver over CAT5 with IR Pass-through provides the
most flexible and cost effective solution in the market to route high definition video sources plus
multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the remote displays at
the same time.
HDMI-C5SW-R can be used with SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 Matrix Switch Series over CAT5 / CAT6.
Through low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be transmitted to the
display sites, but also users can switch among four HDMI sources using the push-in button or remote control.
With single power design at the source site, each remote module is easily installed without power supply.
Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any
HDMI supported devices directly.
4
5
-
1.5
Silicon Image chipset embedded for best quality, compatibility and reliability
HDMI 1.3c compliant
HDCP compliant
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any HDMI source at any time
Supports 7.1 channel digital audio
Supports default HDMI EDID and learns the EDID of displays
The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote
control, or RS-232 control
Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from remote
receiver to matrix master
Allows to control matrix master through IR remote control at remote receiver’s site
Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI
source device, better grade HDMI display, and better quality solid CAT6 cable
Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively
Fast response time – 2~5 seconds for channel
Package Contents
Before you start the installation of the converter, please check the package contents.
-
HDMI-C5SW-R
x1
-
User’s Manual
x1
1.6




Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
6
1.7
Panel Description
1.7.1 HDMI-C5SW-R
1.
5V DC Power jack
2.
HDMI Signal
3.
IR Signal
4.
INPUT #
5.
Input Select
6.
EQ Level
7.
HDMI OUT
8.
IR Transmitter
7
1.8
Installation (HDMI-C5SW-R)
To setup Avenview HDMI-C5SW-R with SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 follow these steps for
connecting to a device:
1.
2.
3.
4.
5.
6.
7.
Connect all sources to HDMI Inputs on the 8X8 HDMI over CAT5 Matrix Switch (SW-HDMI-C5-8X8)
Connect each DDC output on the SW-HDMI-C5-8X8 to respective DDC input on the remote receiver
HDMI-C5SW-R
Connect each TMDS output on the SW-HDMI-C5-8X8 to respective TMDS input on the remote
receiver HDMI-C5SW-R
Connect IR emitter cable to the SW-HDMI-C5-8X8 and direct the IR emitter to the build-in IR receiver
of the sources
Connect the +5V 6A DC power supply to the SW-HDMI-C5-8X8
Power on all HDMI sources
Power on the SW-HDMI-C5-8X8
Please refer to SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 Matrix Switch user guides for details on how
to setup IR, Software.
8
Section 2: Specifications
Item
Units
Unit Description
HDMI Compliance
HDCP Compliance
Video Bandwidth
Supported Resolutions
Resolution and Distance
Audio Support
Equalization
Input TMDS Signal
Input DDC Signal
ESD Protection
Input
Output
HDMI Input Selection
HDMI Source Control
HDMI Connector
RJ45 Connector
RS232 Connector
Dimensions (L x W x H)
Power Supply
Power Consumption
Description
HDMI-C5SW-R
HDMI 1.3 Receiver over CAT5
HDMI 1.3c
Yes
Single Link 225 MHz (6.75Gbps)
480i / 480p / 720p / 1080i / 1080p60
Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 55meter (180feet) (CAT6)
Surround Sound (up to 7.1 Ch.) or Stereo Digital Audio
-8 Level Digital Control
1.2 Volts (peak-to-peak)
5 Volts (peak-to-peak, TTL)
- Human body model — ±15kV (air-gap discharge) & ±8kV (contact discharge)
- Core chipset — ±8kV
1 x RJ45 TMDS
1 x RJ45 DDC
1 x IR Socket for IR Receiver
1 x HDMI
Push Button / IR Remote
Through IR Control Path from IR Receiver
Type A (19 pin female)
WE/SS 8P8C with 2 LED indicators
DE-9 (9-pin D-sub Female)
3.3” x 3.5” x 1”
Mostly not required
1 Watt (max) / provided by SW-HDMI-C5-8X8
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
32˚ ~ 104˚F (0˚ to 40˚C)
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
20~90% RH (no condensation)
9
Notice
1.
If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to
retrieve and provide DVI/HDMI EDID information.
2.
All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz
LAN cable and ASTRODESIGN Video Signal Generator VG-859C.3
3.
The transmission length is largely affected by the type of LAN cables, the type of HDMI sources,
and the type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable
300m or 1000ft form) can transmit a lot longer signals than stranded LAN cables (usually in
patch cord form). Shielded STP cables are better suit than unshielded UTP cables. A solid UTP
CAT5e cable shows longer transmission length than stranded STP CAT6 cable. For long extension
users, solid LAN cables are your only choice.
4.
EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance.
5.
To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use
shielded LAN cables to improve EMI problems, which is worsen in long transmission.
6.
Because the quality of the LAN cables has the major effects in how long transmission distance
will be made and how good is the received display, the actual transmission length is subject to
your LAN cables. For resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended.
7.
If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input
[HDMI input #1] generally can produce better transmission performance among all HDMI inputs.
10
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
11