ZyXEL Communications 650 Series User`s guide

ADSL Internet Access Device
Prestige 650
Compact Guide
E n g l i s h Ve r s i o n
Corporate Headquarters
ZyXEL Communications Co.
Tel: +886-3-578-3942
Fax: +886-3-578-2439
Email: sales@zyxel.com.tw
http://www.zyxel.com
http://www.zyxel.com.tw
North America
ZyXEL Communications Inc.
Tel: +1-714-632-0882
Fax: +1-714-632-0858
Email: sales@zyxel.com
http://www.zyxel.com
Germany
ZyXEL Deutschland GmbH.
Tel: +49 2405 6909 0
Fax: +49 2405 6909 99
Email: sales@zyxel.de
http://www.zyxel.de
Norway
ZyXEL Communications A/S
Tel: +47 22 80 61 80
Fax: +47 22 80 61 81
Email: sales@zyxel.no
http://www.zyxel.no
Sweden
ZyXEL Communications A/S
Tel: +46 31 744 77 00
Fax: +46 31 744 77 01
Email: sales@zyxel.se
http://www.zyxel.se
Finland
ZyXEL Communications Oy
Tel: +358-9-4780 8400
Fax: +358-9-4780 8448
Email: sales@zyxel.fi
Support Model
P650H Series
P650HW Series
Denmark
ZyXEL Communications A/S
Tel: +45 39 55 07 00
Fax: +45 39 55 07 07
Email: sales@zyxel.dk
http://www.zyxel.dk
65-020-650024
Prestige 650H/HW
Table of Contents
1 Introducing the Prestige ................................................................................................................ 2
2 Hardware ........................................................................................................................................ 3
2.1 Rear Panel Connections ............................................................................................................ 3
2.2 Inserting a PCMCIA Wireless LAN Card................................................................................. 4
2.3 The Front Panel LEDs............................................................................................................... 4
3 Setting Up Your Computer’s IP Address..................................................................................... 6
3.1 Windows 2000/NT/XP.............................................................................................................. 6
3.2 Checking/Updating Your Computer’s IP Address .................................................................... 7
3.3 Testing the Connection to the Prestige...................................................................................... 7
4 Configuring Your Prestige ............................................................................................................ 8
4.1 Accessing Your Prestige Via Web Configurator....................................................................... 8
4.2 Common Screen Command Buttons ....................................................................................... 10
4.3 Internet Access Using the Wizard........................................................................................... 10
4.4 Test Your Internet Connection................................................................................................ 15
5 Advanced Configuration ............................................................................................................. 15
5.1 Wireless LAN Setup ............................................................................................................... 15
5.2 Wireless LAN Security Setup ................................................................................................. 17
5.3 Network Address Translation Overview................................................................................. 18
5.4 Configuring SUA Server......................................................................................................... 18
5.5 UPnP Overview....................................................................................................................... 20
5.6 Configuring UPnP................................................................................................................... 20
6 Troubleshooting ........................................................................................................................... 21
1 Introducing the Prestige
The Prestige 650H/HW ADSL router is the ideal all-in-one device for small networks connecting to
the Internet via ADSL. Key features of the Prestige include wireless LAN, NAT, Remote
Management and UPnP. See your User’s Guide for more details on all Prestige features.
You should have an Internet account already set up and have been given most of the following
information.
INTERNET ACCOUNT INFORMATION
Your device’s WAN IP Address (if given): __________________
DNS Server IP Address (if given): Primary __________________, Secondary _________________
Virtual Path Identifier (VPI): ____________
Virtual Channel Identifier (VCI): ____________
2
Prestige 650H/HW
INTERNET ACCOUNT INFORMATION
Multiplexing (VC-based or LLC-based):
VC
LLC
Encapsulation:
RFC 1483
ENET ENCAP
Ethernet Encapsulation Gateway IP Address: ____________________
PPPoA
User Name: ____________
PPPoE
Service Name: ____________
Password: ____________
User Name: ____________
Password: ____________
2 Hardware
2.1 Rear Panel Connections
Figure 1 Prestige Hardware Connections
3
Prestige 650H/HW
Table 1 Prestige Rear Panel Description
LABEL
DESCRIPTION
1.
DSL
Connect to a telephone jack using the included phone wire.
2.
LAN
1..4
Connect to a computer/external hub using an Ethernet cable.
3.
POWER
Connect to a power source using the power adapter for your region (see your User’s Guide).
After you’ve made the connections, connect the power cable to a power supply and push in the power button to
turn on the Prestige.
The PWR LED turns on. The SYS LED blinks while performing system testing and then turns steady on if the
testing is successful. A LAN LED turns on if a LAN port is properly connected.
CONSOLE
Connect to a serial port (COM port) on your computer using the RS-232 end (the big end) of the
console cable (optional part). Connect the other end to the Prestige CONSOLE port.
RESET
You only need to use this button if you’ve forgotten the Prestige’s password. It returns the
Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc.; see your
User’s Guide for details).
2.2 Inserting a PCMCIA Wireless LAN Card
To add optional wireless LAN capabilities, you need a ZyAIR series wireless LAN PCMCIA card.
Step 1.
Locate the slot labeled Wireless LAN on the Prestige.
Step 2.
With its pin connector facing the slot and the LED side facing upwards, slide the ZyAIR
wireless LAN card into the slot.
Never force, bend or twist the wireless LAN card into the slot.
Step 3.
Restart the Prestige. The WLAN LED should turn on.
2.3 The Front Panel LEDs
Figure 2 Prestige Front Panel
4
Prestige 650H/HW
Refer to the following table for more detailed LED descriptions.
Table 2 Front Panel LED Description
LED
PWR
COLOR
DESCRIPTION
On
The Prestige is receiving power.
Off
The Prestige is not receiving power.
On
The Prestige is functioning properly.
Blinking
The Prestige is rebooting.
Off
The system is not ready or has malfunctioned.
Red
On
Power to the Prestige is too low.
PPPoE
Green
On
The connection to the PPPoE server is up.
Off
There is no connection to the PPPoE server.
LAN 1-4
Green
On
The Prestige has a successful 10Mb Ethernet connection.
Blinking
The Prestige is sending/receiving data.
Off
The Prestige does not have 10Mb Ethernet connection.
On
The Prestige has a successful 100Mb Ethernet connection.
Blinking
The Prestige is sending/receiving data.
Off
The Prestige does not have 100Mb Ethernet connection.
On
Wireless link is ready.
Off
Wireless link is not ready or has failed.
Blinking
The Prestige is sending/receiving data through the WLAN.
On
The Prestige is linked successfully to a DSLAM.
Blinking
The Prestige is initializing the DSL line.
Off
The DSL link is down.
Blinking
The Prestige is sending/receiving data.
Off
The system is ready, but is not sending/receiving data.
SYS
Green
STATUS
Green
Orange
WLAN
DSL
ACT
Green
Green
Green
5
Prestige 650H/HW
3 Setting Up Your Computer’s IP
Address
Skip this section if your computer is already set up to accept a dynamic IP
address. This is the default for most new computers.
The Prestige is already set up to assign your computer an IP address. Use this section to set up your
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254
range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can
communicate with your Prestige.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed
on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
3.1 Windows 2000/NT/XP
1.
In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.
2.
In Windows XP, click Network Connections.
In Windows 2000/NT, click Network and Dial-up Connections.
3.
Right-click Local Area Connection and then click Properties.
4.
Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
5.
The Internet Protocol TCP/IP Properties screen opens (the
General tab in Windows XP).
- To have your computer assigned a dynamic IP address, click
Obtain an IP address automatically.
If you know your DNS sever IP address(es), type them in the
Preferred DNS server and/or Alternate DNS server fields.
-To configure a static IP address, click Use the following IP
Address and fill in the IP address (choose one
from192.168.1.2 to 192.168.1.254), Subnet mask
(255.255.255.0), and Default gateway (192.168.1.1) fields.
Then enter your DNS server IP address(es) in the Preferred
DNS server and/or Alternate DNS server fields.
If you have more than two DNS servers, click Advanced, the
DNS tab and then configure them using Add.
6
Prestige 650H/HW
6.
Click Advanced. Remove any previously installed gateways in
the IP Settings tab and click OK to go back to the Internet
Protocol TCP/IP Properties screen.
7.
Click OK to close the Internet Protocol (TCP/IP) Properties
window.
8.
Click OK to close the Local Area Connection Properties
window.
3.2 Checking/Updating Your Computer’s IP Address
1.
In the computer, click Start, (All) Programs, Accessories and then Command Prompt.
2.
In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your computer’s IP
address is in the correct range (192.168.1.2 to 192.168.1.254) with subnet mask 255.255.255.0. This is
necessary in order to communicate with the Prestige.
Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh
computer operating systems.
3.3 Testing the Connection to the Prestige
1.
Click Start, (All) Programs, Accessories and then Command Prompt.
2.
In the Command Prompt window, type "ping” followed by a space and the IP address of the Prestige
(192.168.1.1 is the default).
7
Prestige 650H/HW
3.
Press ENTER and the following screen displays.
C:\>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply
Reply
Reply
Reply
from
from
from
from
192.168.1.1:
192.168.1.1:
192.168.1.1:
192.168.1.1:
bytes=32
bytes=32
bytes=32
bytes=32
time=10ms
time<10ms
time<10ms
time<10ms
TTL=254
TTL=254
TTL=254
TTL=254
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 10ms, Average = 2ms
Your computer can now communicate with the Prestige using the LAN port.
4 Configuring Your Prestige
This Compact Guide shows you how to use the web configurator only. See
your User’s Guide for background information on all Prestige features and
SMT (System Management Terminal) configuration.
4.1 Accessing Your Prestige Via Web Configurator
Step 1.
Launch your web browser. Enter “192.168.1.1” as the web site address.
Web site address.
Figure 3 Entering Prestige LAN IP Address in Internet Explorer
Step 2.
An Enter Network Password window displays. Enter the user name (“admin” is the
default), password (“1234” is the default) and click OK.
8
Prestige 650H/HW
Default user name.
Figure 4 Web Configurator: Password Screen
Step 3.
You should now see the web configurator Site Map screen.
Click Wizard Setup to begin a series of screens to configure your Prestige for the first
time.
Click a link under Advanced Setup to configure advanced Prestige features.
Click a link under Maintenance to see Prestige performance statistics, upload firmware
and back up, restore or upload a configuration file.
Click Logout in the navigation panel when you have finished a Prestige management
session.
WIZARD
Navigation panel
LOGOUT
Figure 5 Web Configurator: Site Map Screen
9
Prestige 650H/HW
The Prestige automatically logs you out if it is left idle for five minutes;
press ENTER to log back in again.
4.2 Common Screen Command Buttons
The following table shows common command buttons found on many web configurator screens.
Apply
Click Apply to save your changes back to the Prestige.
Reset/Cancel
Click Reset or Cancel to begin configuring this screen afresh.
4.3 Internet Access Using the Wizard
Use the Wizard Setup screens to configure your system for Internet access settings and fill in the
fields with the information in the Internet Account Information table. Your ISP may have already
configured some of the fields in the wizard screens for you.
Step 1.
In the Site Map screen click Wizard Setup to display the first wizard screen.
From the Mode drop-down list box, select Routing
(default) if your ISP allows multiple computers to
share an Internet account. Otherwise select Bridge.
Select the encapsulation type your ISP uses from the
Encapsulation drop-down list box. Choices vary
depending on what you select in the Mode field.
Select the multiplexing method used by your ISP from
the Multiplex drop-down list box.
Enter the correct Virtual Path Identifier (VPI) and
Virtual Channel Identifier (VCI) numbers supplied by
your ISP in the VPI and VCI fields. These fields may
already be configured.
Click Next.
Figure 6 Wizard Screen 1
Step 2.
The second wizard screen varies depending on what mode and encapsulation type you
use. All screens shown are with routing mode. Configure the fields and click Next to
continue.
10
Prestige 650H/HW
If your ISP provides the name of your
PPPoE service provider, enter it in the
Service Name field.
Enter the user name and password exactly
as your ISP assigned them.
Select Obtain an IP Address
Automatically if you have a dynamic IP
address; otherwise select Static IP Address
and type your ISP assigned IP address in
the text box below.
Select Connect on Demand when you don't
want the connection up all the time and
specify an idle time-out period (in seconds)
in the Max. Idle Timeout field.
Select Nailed-Up Connection when you
want your connection up all the time. The
Prestige will try to bring up the connection
automatically if it is disconnected.
Figure 7 Internet Connection with PPPoE
From the Network Address Translation drop-down list box, select SUA Only, Full Feature or None. Refer to
the Network Address Translation section for more information.
Enter the IP address given by your ISP in
the IP Address field.
The IP Address field is
not available for bridge
mode.
Refer to Figure 7 for description of the
Network Address Translation field.
Figure 8 Internet Connection with RFC 1483
11
Prestige 650H/HW
In the ENET ENCAP Gateway field, enter
the gateway IP address given by your ISP.
Refer to Figure 7 for other field descriptions.
Figure 9 Internet Connection with ENET ENCAP
Refer to Figure 7 for field descriptions.
The IP Address and
Network Address
Translation fields are not
available for bridge
mode.
Figure 10 Internet Connection with PPPoA
Step 3.
Verify the settings in the screen shown next. To change the LAN information on the
Prestige, click Change LAN Configurations. Otherwise click Save Settings to save the
configuration and skip to step 5.
12
Prestige 650H/HW
Figure 11 Wizard Screen 3
Step 4.
If you want to change your Prestige LAN settings, click Change LAN Configuration to
display the screen as shown next.
13
Prestige 650H/HW
Enter the IP address of your Prestige in dotted decimal
notation in the LAN IP Address field. For example,
192.168.1.1 (factory default).
If you change the Prestige’s
LAN IP address, you must use
the new IP address if you want
to access the web configurator
again.
Enter a subnet mask in dotted decimal notation in the
LAN Subnet Mask field.
Figure 12 Wizard: LAN Configuration
From the DHCP Server drop-down list box, select On
to allow your Prestige to assign IP addresses, an IP
default gateway and DNS servers to computer systems
that support the DHCP client. Select Off to disable
DHCP server.
When DHCP server is used, set the following items:
Specify the first of the contiguous addresses in the IP address pool in the Client IP Pool Starting Address field.
Specify the size or count of the IP address pool in the Size of Client IP Pool field.
Enter the IP address(es) of the DNS server(s) in the Primary DNS Server and/or Secondary DNS Server fields.
Step 5.
The Prestige automatically tests the connection to the computer(s) connected to the LAN
ports. To test the connection from the Prestige to the ISP, click Start Diagnose.
Otherwise click Return to Main Menu to go back to the Site Map screen.
Figure 13 Wizard Screen 4
14
Prestige 650H/HW
4.4 Test Your Internet Connection
Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning.
Refer to the User’s Guide for more detailed information on the complete range of Prestige features.
If you cannot access the Internet, open the web configurator again to confirm that the Internet
settings you configured in the Wizard Setup are correct.
5 Advanced Configuration
This section shows how to configure some of the advanced features of the Prestige.
5.1 Wireless LAN Setup
A wireless LAN (WLAN) provides a flexible data communications system that you can use to
access various services (the Internet, email, printer services, etc.) on the wired network without
additional expensive network cabling infrastructure. In effect, a wireless LAN environment provides
you the freedom to stay connected to the wired network while moving in the coverage area.
To configure wireless settings, click Advanced Setup in the navigation panel, Wireless and then
click the Wireless link.
Figure 14 Wireless LAN: Wireless
15
Prestige 650H/HW
The following table describes the fields in this screen.
Table 3 Wireless LAN: Wireless
LABEL
DESCRIPTION
ESSID
(Extended Service Set IDentity) The ESSID is a unique name to identify the Prestige in the
wireless LAN. Wireless clients associating to an Access Point (the Prestige) must have the same
ESSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters).
Hide ESSID
Select Yes to hide the ESSID so a wireless client cannot obtain the ESSID through passive
scanning.
Select No to make the ESSID visible so a wireless client can obtain the ESSID through passive
scanning.
Channel ID
The range of radio frequencies used by IEEE 802.11b wireless devices is called a channel. Set
the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. Adjacent APs with overlapping coverage areas
should use different channels to reduce crosstalk. Crosstalk occurs when the radio signals from
access points overlap and interfere with one another degrading performance.
RTS/CTS
Threshold
Select this option to enable the RTS (Request To Send)/CTS (Clear To Send) threshold to
minimize collisions. Enter a value between 0 and 2432. The default is 2432.
Request To Send is the threshold (number of bytes) for enabling the RTS/CTS handshake. Data
with its frame size larger than this value will perform the RTS/CTS handshake. Setting this
attribute to be larger than the maximum MSDU (MAC Service Data Unit) size turns off the
RTS/CTS handshake.
Fragmentation
Threshold
Fragmentation Threshold is the maximum data fragment size that can be sent.
WEP
Encryption
WEP (Wired Equivalent Privacy) encrypts data frames before transmitting them over the
wireless network.
Select Disable allows all wireless computers to communicate with the access points without any
data encryption.
Select 64-bit WEP or 128-bit WEP and then configure the keys in the fields provided to activate
data encryption.
Key 1 to Key 4
The WEP keys are used to encrypt data. Both the Prestige and the wireless clients must use the
same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 characters (ASCII string) or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 characters (ASCII string) or 26 hexadecimal characters
("0-9", "A-F").
Select only one key to be activated at any one time.
16
Prestige 650H/HW
The wireless clients and Prestige must use the same ESSID, channel ID and
WEP encryption key (if WEP is enabled) for wireless communication.
5.2 Wireless LAN Security Setup
For added security, set your Prestige to check the MAC address of the wireless client device against
a list of allowed or denied MAC addresses.
To set up the MAC address list for wireless LAN, click Advanced Setup in the navigation panel,
Wireless and then click the MAC Filter link.
Figure 15 Wireless LAN: MAC Address Filter
The following table describes the fields in this screen.
Table 4 Wireless LAN: MAC Address Filter
FIELD
Active
DESCRIPTION
Select Yes from the drop down list box to enable MAC address filtering.
17
Prestige 650H/HW
Table 4 Wireless LAN: MAC Address Filter
FIELD
DESCRIPTION
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny Association to block access to the router, MAC addresses not listed will be allowed
to access the router
Action
Select Allow Association to permit access to the router, MAC addresses not listed will be
denied access to the router.
MAC Address
Enter the list of MAC addresses in this table.
5.3 Network Address Translation Overview
NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host
in a packet. For example, the source address of an outgoing packet, used within one network is
changed to a different IP address known within another network.
If you have a single public IP address then select SUA Only in the NAT-Mode screen (see Figure
16). If you have multiple public IP addresses then you may use full feature mapping types (see the
User’s Guide for more details).
NAT supports five types of IP/port mapping. They are:
1.
One-to-One: One-to-one mode maps one local IP address to one global IP address. Note
that port numbers do not change for One-to-one NAT mapping type.
2.
Many-to-One: Many-to-One mode maps multiple local IP addresses to one global IP
address.
3.
Many-to-Many Overload: Many-to-Many Overload mode maps multiple local IP
addresses to shared global IP addresses.
4.
Many-to-Many No Overload: Many-to-Many No Overload mode maps each local IP
address to unique global IP addresses.
5.
Server: This type allows you to specify inside servers of different services behind the NAT
to be accessible to the outside world.
5.4 Configuring SUA Server
An SUA server set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP,
that you can make visible to the outside world even though SUA makes your whole inside network
appear as a single computer to the outside world.
18
Prestige 650H/HW
Step 1.
From the main screen click Advanced Setup and then NAT to open the NAT-Mode
screen. Select SUA Only.
Figure 16 NAT: Mode
Step 2.
Click Edit Details.
Figure 17 SUA/NAT Server
The following table describes the fields in this screen.
19
Prestige 650H/HW
Table 5 SUA/NAT Server
LABEL
DESCRIPTION
Start Port
No.
Type a port number in this field. To forward only one port, type the port number again in the
End Port field. To forward a series of ports, type the start port number here and the end port
number in the End Port field.
End Port
No.
Type a port number in this field. To forward only one port, type the port number in the Start
Port field above and then type it again in this field. To forward a series of ports, type the last
port number in a series that begins with the port number in the Start Port field above.
IP Address
Enter the inside IP address of the server here.
5.5 UPnP Overview
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
All UPnP-enabled devices may communicate freely with each other without additional
configuration. Disable UPnP if this is not your intention.
Windows ME and Windows XP support UPnP. See the Microsoft website for information about
other Microsoft operating systems.
Make sure you apply Microsoft’s UPnP security patch before enabling the
UPnP feature. Refer to the Microsoft website.
5.6 Configuring UPnP
Click Advanced Setup and then UPnP to open the UPnP screen.
Figure 18 UPnP
The following table describes the fields in this screen.
20
Prestige 650H/HW
Table 6 UPnP
FIELD
DESCRIPTION
Enable the Universal Plug
and Play (UPnP) Service
Select this checkbox to activate UPnP. Be aware that anyone could use a UPnP
application to open the web configurator's login screen without entering the
Prestige's IP address (although you must still enter the password to access the
web configurator).
Allow users to make
configuration changes
through UPnP
Select this check box to allow UPnP-enabled applications to automatically
configure the Prestige so that they can communicate through the Prestige, for
example by using NAT Traversal, UPnP applications automatically reserve a
NAT forwarding port in order to communicate with another UPnP enabled
device; this eliminates the need to manually configure port forwarding for the
UPnP enabled application.
6 Troubleshooting
Table 7 Troubleshooting
PROBLEM
CORRECTIVE ACTION
None of the LEDs turn
on when you turn on
the Prestige.
Make sure that you have the correct power adapter connected to the Prestige and
plugged in to an appropriate power source. Check all cable connections.
Cannot access the
Prestige from the LAN.
Check the cable connection between the Prestige and your computer or hub. Refer to
the Rear Panel Connections section for details.
If the LEDs still do not turn on, you may have a hardware problem. In this case, you
should contact your local vendor.
Ping the Prestige from a LAN computer. Make sure your computer Ethernet adapter is
installed and functioning properly.
Cannot ping any
computer on the LAN.
If the LAN LEDs are all off, check the cable connections between the Prestige and your
LAN computers.
Verify that the IP address, subnet mask of the Prestige and the LAN computers are in
the same IP address range.
Cannot ping any
computer on the
WLAN
Make sure the wireless card is properly inserted in the Prestige and the WLAN LED is
on.
Make sure the wireless card on the wireless client is working properly.
Check that both the Prestige and wireless client(s) are using the same ESSID, channel
and WEP keys (if WEP encryption is activated).
21
Prestige 650H/HW
Table 7 Troubleshooting
Cannot get a WAN IP
address from the ISP.
The WAN IP is provided after the ISP verifies the MAC address, host name or user ID.
Find out the verification method used by your ISP and configure the corresponding
fields.
If the ISP checks the user ID, check your service type, user name, and password in the
WAN screen.
Cannot access the
Internet.
Verify the Internet connection settings in the WAN screen.
Make sure you entered the correct user name and password.
For wireless clients, check that both the Prestige and wireless client(s) are using the
same ESSID, channel and WEP keys (if WEP encryption is activated).
22
ADSL Internet Access Device
Prestige 650
Compact Guide
E n g l i s h Ve r s i o n
Corporate Headquarters
ZyXEL Communications Co.
Tel: +886-3-578-3942
Fax: +886-3-578-2439
Email: sales@zyxel.com.tw
http://www.zyxel.com
http://www.zyxel.com.tw
North America
ZyXEL Communications Inc.
Tel: +1-714-632-0882
Fax: +1-714-632-0858
Email: sales@zyxel.com
http://www.zyxel.com
Germany
ZyXEL Deutschland GmbH.
Tel: +49 2405 6909 0
Fax: +49 2405 6909 99
Email: sales@zyxel.de
http://www.zyxel.de
Norway
ZyXEL Communications A/S
Tel: +47 22 80 61 80
Fax: +47 22 80 61 81
Email: sales@zyxel.no
http://www.zyxel.no
Sweden
ZyXEL Communications A/S
Tel: +46 31 744 77 00
Fax: +46 31 744 77 01
Email: sales@zyxel.se
http://www.zyxel.se
Finland
ZyXEL Communications Oy
Tel: +358-9-4780 8400
Fax: +358-9-4780 8448
Email: sales@zyxel.fi
Support Model
P650H Series
P650HW Series
Denmark
ZyXEL Communications A/S
Tel: +45 39 55 07 00
Fax: +45 39 55 07 07
Email: sales@zyxel.dk
http://www.zyxel.dk
65-020-650024