Sandia Plastics Sniper 2-100-H Owner`s manual

Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
Please fill out the following information:
100 PSI
Model No:
Serial No:
REGISTER
YOUR
MACHINE
ONLINE!
Distributor Name:
Distributor Phone No:
Date of Purchase:
Model No. 80-2100
Model No. 80-2100-H with Heat
Sniper 12-Gallon Carpet Extractor
12-Gallon, 100 PSI Carpet Extractor
By Sandia Products
Reliable Power
Innovative Design
Safe & Easy to Use
Powerful Extracting
15571 Container Lane, Huntington Beach, CA 92649
Phone: 714-901-8400 | Toll Free: 800-983-5834 | Fax: 714-901-8404
info@sandiaplastics.com | www.sandiaplastics.com
© 2012 Copy Rights Reserved Sandia Products, Inc.
Important Information and Safety Instructions
Register your Machine at www.sandiaplastics.com/registration.aspx
Serial No:
© 2012 Copy Rights Reserved Sandia Products, Inc.
Easy Transport
Patented Features
Notes:
(2) 12-Gallon, 100 PSI Carpet Extractor
12-Gallon, 100 PSI Carpet Extractor (15)
9.0 80-2100-H Machine Parts List Continued
Drawing No.
61
62
63
64
65
66
67
68
Item ID
80-0011-2
10-0907
10-0901
80-0010
10-0801-I
80-0101-M
10-0843
10-0812
Item Description
90 Degree Street Elbow
Strain Relief for Tube Heater
175 psi Relief Valve for Heater
1/4" Brass Tee
90 FPT for Extractor Heater
1/4" Male Check Valve
3/8" Black Hose for Extractor
100 psi Extractor Pump
Qty.
1.00
2.00
1.00
1.00
1.00
1.00
6.00
1.00
69
70
0-0356
10-0835-B
3/8 MPT x 3/8 Barb 90 Degree
Pump Bolt 100 psi Extractor
2.00
4.00
71
10-0843
3/8" Black Hose for Extractor
6.00
72
10-0868
1/4" Female QD for Extractor
1.00
73
10-0846
1/4" MPT Hex Nipple for Extractor
1.00
74
10-0801-J
90 MPT for Extractor Heater
1.00
75
80-0017
Bulk Head fitting for Extractor
2.00
76
80-0017
Bulk Head fitting for Extractor
2.00
77
10-0843
3/8" Black Hose for Extractor
6.00
78
10-0400-C
Keeper Latch for Extractor
1.00
79
10-0832
S/R Strap Bolts
4.00
80
10-0831
S/R Bracket for Extractor
2.00
81
10-0818
S/R Top of Tank Bolt on Extractor
2.00
Dear Valued Customer,
Congratulations on the purchase of your 12-Gallon Carpet Extractor! The world of
carpet cleaning is becoming more high-tech and competitive and we strive to provide
you with the most innovative products. Our carpet extractor is yet another example of
this, bringing a new dimension to carpet and upholstery cleaning with its cutting-edge
features, quality and value.
Please review this manual, paying careful attention to the Safety Instructions section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will void
your warranty. You can be confident that simple maintenance will ensure that your carpet
extractor provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering parts,
please call an authorized distributor.
Before you begin using your carpet extractor, please thoroughly review the Owner’s
Manual.
Again, congratulations on the purchase of your 12-Gallon Carpet Extractor!
(14) 12-Gallon, 100 PSI Carpet Extractor
12-Gallon, 100 PSI Carpet Extractor (3)
Table of Contents
Warranty Policy.................................................................................................5
RMA Procedure.................................................................................................6
1.0 Safety Instructions......................................................................................6
2.0 Grounding Instructions...............................................................................7
3.0 Prepare Unit for Use...................................................................................8
4.0 Maintenance................................................................................................8
5.0 Problem Solving.........................................................................................9
6.0 80-2100 Machine Schematic Drawing......................................................10
7.0 80-2100 Machine Parts List......................................................................11
8.0 80-2100-H Machine Schematic Drawing.................................................12
9.0 80-2100-H Machine Parts List..................................................................13
(4) 12-Gallon, 100 PSI Carpet Extractor
9.0 80-2100-H Machine Parts List
Drawing No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Item ID
SN-12-ST-GRYGRAN
10-0479
10-0845
SN-12-L-GRYGRAN
80-0001
10-0843
10-0826
80-0026
10-0806
10-0379
10-0204
10-0803
10-0803-H
10-0809-A
80-0200
SN-12-RT-GRYGRAN
80-0008
10-0416-A
10-0804-A
10-0804
10-0419-A
80-0012
10-0805
10-0024
10-0849
10-0848-B
10-0811
10-0838
10-0850
10-0851
10-0822
10-1030-S2
SN-12-MFLD
10-0023
10-0833
10-0830
10-0821
10-0820
SN-12-MB-BLKGRAN
10-0836
10-0807
10-0840
10-0835-N
10-0834
10-0808
10-0816
10-0400-D
10-0379
80-0040
10-0852
10-1500-A
10-0814
10-0814-B
10-0921
10-0921
10-0204
80-0022-A
10-0920
80-0022-A
10-0921
Item Description
12-Gallon Solution Tank - Gray Granite
1/4" Male Close Nipple
1/4" Strainer for Extractor
12-Gallon Lid - Gray Granite
Extractor Exhaust Hose
3/8" Black Hose for Extractor
3/4" Hose Clamp for Extractor
3/8 Barb x 1/4 MPT 90 Degree
Barb Hose Fitting for Extractor
8-32 x 3/8 Screw
Motor Mount Back-Up Washer
Splash-Proof Switch for Extractor
Splash-Proof Heater Switch
Extractor 4-Hole Switch Plate
Extractor Harness
12-Gallon Recovery Tank - Gray Granite
1.5 PVC Female Adapter
1-1/2" Black ABS Stand Pipe
Hatch Cover Gasket for Extractor
Hatch Cover for Extractor
Screw for Extractor Hatch
Shut-Off Assembly for Extractor
Dump Valve for Extractor
1-1/2" Black Vacuum Hose
1-1/2" ABS Fitting
1-1/2" 90 Degree ABS Street Elbow
2-Stage Extractor Motor
Pigtail for Extractor
Strain Relief for Extractor
Strain Relief Nut for Extractor
Exhaust Grate for Extractor
2-Stage Extractor Motor Gasket
Extractor Motor Manifold
Shoulder and Waist Belt Washer
Motor Manifold Bolts for Extractor
Hinge Keeper for Extractor
Extractor Hinge
End Cap for Rod on Extractor
12-Gallon Motor Base - Black Granite
19" Axle for Extractor
Wheels for Extractor
Nylon Washer
Nut for Pump Bolt on Extractor
Pump Flat Washer
Caster for Extractor
Caster Bolt
Latch for Extractor
8-32 x 3/8 Screw
3000 psi Hose for Extractor
1/4" 90 Degree Brass Elbow
Heater Element 1000 Watt
Senor for Extractor Heater
Manual Sensor for Heater
Breakdown of Aluminum Box for Dual Rod Heater
Aluminum Box for Dual Rod Heater
Motor Mount Back-Up Washer
Screw for Panel
Dual Rod Heat Exchanger Tube
Screw for Panel
Aluminum Box for Dual Rod Heater
Qty.
1.00
1.00
1.00
1.00
0.30
6.00
6.00
3.00
1.00
8.00
18.00
3.00
1.00
1.00
1.00
1.00
1.00
1.30
1.00
1.00
12.00
1.00
1.00
1.60
1.00
3.00
2.00
2.00
2.00
2.00
3.00
2.00
2.00
4.00
10.00
2.00
2.00
4.00
1.00
1.00
2.00
8.00
4.00
14.00
2.00
8.00
1.00
8.00
4.50
2.00
2.00
2.00
2.00
2.00
2.00
18.00
8.00
2.00
8.00
2.00
12-Gallon, 100 PSI Carpet Extractor (13)
8.0 80-2100-H Machine Schematic Drawing
New Equipment Warranty
5-years on molded body parts, 2-Years on motor and electrical components, 1-year on
pump.
Warranty Policy
All equipment is inspected and tested before shipping from the manufacturer. All parts are
warranted to be new and free from defects in workmanship and material, under normal use to the
original retail purchaser. This warranty limits manufacturer’s liability for defects in workmanship
or materials for replacement of defective parts only. The manufacturer accepts no liability for
incidental or consequential damages arisen from the use of any equipment, defective or not. This
warranty is in lieu of all expressed or implied warranties and is extended only to the original retail
purchaser. Manufacturer sales and service representatives are not authorized to waive or alter the
terms of this warranty, or to increase the obligations of the manufacturer under the warranty. Parts
replaced or repaired under this warrant are warranted for the remainder of the original warranty
period.
Freight charges and travel charges to and from the service provider shall be covered for ninety (90)
days from the purchase date. After the ninety (90) day period, these freight charges shall be paid
by the equipment owner, subject to manufacturer discretion. Certain circumstances may require
additional consideration. No travel charges shall be covered after ninety (90) days.
The manufacturer covers up to one (1) year (365 days) of service labor at the manufacturer’s
calculated hourly labor rate/repair time when performed by a manufacturer’s authorized service
provider. Ultimately, labor reimbursement costs are at the discretion of the manufacturer. After
one (1) year, the original retail purchaser is responsible for all labor costs with no manufacturer
reimbursement.
The original purchaser must contact the manufacturer to follow correct RMA/warranty procedures.
They must have a copy of the RMA Sheet enclosed in the box with the returned item. No returns
shall be authorized unless the proper RMA procedures are followed. It is the responsibility of the
distributor to repair the customer’s equipment as soon as possible. If the distributor does not have
the facilities to repair the equipment, it may be shipped or taken to an authorized service center for
repair.
The manufacturer charges a 15% restocking fee for any items that are being returned to stock. Items
must be new, unused, free of damage and are only good for up to one (1) year. After one (1) year,
the manufacturer does not accept the return of any item(s) for a reimbursed price.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of
any other parts will void warranty. Sandia Products does not reimburse for parts used by customer
that were not supplied directly for the machine under warranty.
The customer must contact the manufacturer prior to working on or changing out of any parts, etc.
The manufacturer must issue an RMA Sheet containing approved labor time and replacement parts.
Do not send parts or equipment back to the manufacturer without an RMA Number and approval.
No labor will be paid for, nor parts cost paid for or reimbursed, that have not previously been
approved by the manufacturer. All warranty work must be approved and authorized to qualify, and
appropriate warranty procedures must be followed.
The warranty starts on the purchase date by the original purchaser from an authorized Sandia
Products distributor, subject to proof of purchase. The Machine Registration Form must be
completed online at the time of purchase. If proof of purchase cannot be identified, the warranty
start date is ninety (90) days after the date of sale to an authorized Sandia Products distributor.
(12) 12-Gallon, 100 PSI Carpet Extractor
12-Gallon, 100 PSI Carpet Extractor (5)
Returned Material Authorization (RMA) Procedure
Original purchaser must contact the manufacturer to follow correct RMA/warranty
procedures. Must include a copy of RMA Sheet enclosed in the box with returned item.
No returns shall be authorized unless the proper RMA procedures are followed. It is the
responsibility of the distributor to repair the customer’s equipment as soon as possible. If
the distributor does not have the facilities to repair the equipment, it may be shipped or
taken to an authorized service center for repair.
Customer must contact the manufacturer prior to working on or changing out any
parts, etc. Manufacturer must issue an RMA Sheet containing approved labor time and
replacement parts. Do not send parts or equipment back to manufacturer without an RMA
Number and approval. No labor will be paid for, nor part costs paid for or reimbursed that
have not been previously approved by manufacturer. All warranty work must be approved
and authorized to qualify and appropriate warranty procedures must be followed.
1.0 Safety Instructions
READ THIS MANUAL BEFORE USING YOUR CARPET EXTRACTOR.
KNOW THE PROPER OPERATION, CORRECT APPLICATIONS AND THE
LIMITATIONS OF THIS EQUIPMENT BEFORE USE.
Reduce the Risk of Fire, Electric Shock or Injury:
• Use only as described in this manual. Use only the attachments recommended by the
manufacturer.
• Test all outlets with an outlet tester before plugging machine into any outlet. Plug cord
into the nearest grounded outlet.
• DO NOT unplug by pulling on the cord, grasp the plug. DO NOT pull unit by the
cord.
• Keep cord away from heated surfaces.
• Never attempt adjustments or repairs while the machine is plugged in.
• DO NOT use if cord or plug are damaged.
• DO NOT use outdoors, in standing water on wet surfaces.
• Pay close attention when using machine near children.
• DO NOT pick up flammable or combustible materials or use machine where they may
be present.
• DO NOT leave machine outdoors, in extreme heat or cold. Harsh weather elements
will damage components and void warranty.
• Lift using only the appropriate handles.
• Always wear the appropriate clothing and safety equipment when operating the
machine.
• Keep all body parts, hair and loose clothing away from openings and moving parts.
• Use extra care when cleaning stairs. Never move the machine up or down stairs with
fluid in the machine.
• Use common sense to protect yourself and others from injury when using the machine.
(6) 12-Gallon, 100 PSI Carpet Extractor
7.0 80-2100 Machine Parts List
Drawing No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
Item ID
SN-12-ST-GRYGRAN
80-0017
80-0017
10-0479
10-0845
SN-12-L-GRYGRAN
80-0001
10-0843
10-0826
80-0026
10-0806
10-0379
10-0204
10-0803
10-0809
80-0200
SN-12-RT-GRAYGRAN
80-0008
10-0416-A
10-0804-A
10-0804
10-0419-A
80-0012
10-0805
10-0024
10-0849
10-0848-B
10-0833
10-0204
10-0811
10-0838
10-0850
10-0851
10-0822
10-1030-S2
SN-12-MFLD
10-0830
10-0821
10-0820
SN-12-MB-BLKGRAN
10-0836
10-0807
10-0840
10-0835-N
10-0834
10-0808
10-0816
10-0379
10-0400-D
80-0026
80-0017
10-0823
10-0812
10-0835-B
10-0400-C
10-0868
10-0846
10-0832
10-0831
10-0818
10-0023
Item Description
12-Gallon Solution Tank - Gray Granite
Bulk Head fitting for Extractor
Bulk Head fitting for Extractor
1/4" Male Close Nipple
1/4" Strainer for Extractor
12-Gallon Lid - Gray Granite
Extractor Exhaust Hose
3/8" Black Hose for Extractor
3/4" Hose Clamp for Extractor
3/8 Barb x 1/4 MPT 90 Degree
Barb Hose Fitting for Extractor
8-32 x 3/8 Screw
Motor Mount Back-Up Washer
Splash-Proof Switch for Extractor
Extractor 3-Hole Switch Plate
Extractor Harness
12-Gallon Recovery Tank - Gray Granite
1.5 PVC Female Adapter
1-1/2" Black ABS Stand Pipe
Hatch Cover Gasket for Extractor
Hatch Cover for Extractor
Screw for Extractor Hatch
Shut-Off Assembly for Extractor
Dump Valve for Extractor
1-1/2" Black Vacuum Hose
1-1/2" ABS Fitting
1-1/2" 90 Degree ABS Street Elbow
Motor Manifold Bolts for Extractor
Motor Mount Back-Up Washer
2-Stage Extractor Motor
Pigtail for Extractor
Strain Relief for Extractor
Strain Relief Nut for Extractor
Exhaust Grate for Extractor
2-Stage Extractor Motor Gasket
Extractor Motor Manifold
Hinge Keeper for Extractor
Extractor Hinge
End Cap for Rod on Extractor
12-Gallon Motor Base - Black Granite
19" Axle for Extractor
Wheels for Extractor
Nylon Washer for Extractor Axle
Nut for Pump Bolt on Extractor
Pump Flat Washer
Caster for Extractor
Caster Bolt
8-32 x 3/8 Screw
Latch for Extractor
3/8 Barb x 1/4 MPT 90 Degree
Bulk Head fitting for Extractor
3/8" Barb x 3/8" Male for Extractor
100 psi Extractor Pump
Pump Bolt 100 psi Extractor
Keeper Latch for Extractor
1/4" Female QD for Extractor
1/4" MPT Hex Nipple for Extractor
S/R Strap Bolts
S/R Bracket for Extractor
S/R Top of Tank Bolt on Extractor
Shoulder and Waist Belt Washer
Qty.
1.00
1.00
1.00
1.00
1.00
1.00
0.40
8.80
4.00
2.00
1.00
8.00
18.00
3.00
1.00
1.00
1.00
1.00
1.30
1.00
1.00
12.00
1.00
1.00
1.30
1.00
3.00
10.00
18.00
2.00
1.00
1.00
1.00
3.00
2.00
2.00
2.00
2.00
4.00
1.00
1.00
2.00
8.00
4.00
10.00
2.00
8.00
8.00
1.00
2.00
1.00
2.00
1.00
4.00
1.00
1.00
1.00
4.00
2.00
2.00
4.00
12-Gallon, 100 PSI Carpet Extractor (11)
6.0 80-2100 Machine Schematic Drawing
2.0 Grounding Instructions
DANGER: IMPROPER GROUNDING METHOD CAN RESULT IN A RISK OF
ELECTRIC SHOCK.
Electrical equipment must be grounded. If the machine should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce the risk of
electric shock. The Carpet Extractor is equipped with a cord containing a grounding
conductor and grounding plug. The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded
wire to a flat bed terminal. The grounding wire is the wire with insulation and an outer
green surface, with or without yellow stripes.
Grounding Method
The equipment is for use on a normal 120 Volt circuit. It includes a grounded plug (plug
shown in Figure A). A temporary adapter (Figure B and C) may be used to connect this
plug into a 2-pole receptacle (Figure B) if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet
(Figure A) can be installed by a qualified electrician. The green colored rigid ear lug or
the like extending from the adapter must be connected to a permanent ground, such as a
properly grounded outlet box cover. Whenever an adapter is used, it must be held in place
by a metal screw.
WARNING:
Improper connection of the equipment grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt
as to whether the outlet is properly grounded. DO NOT modify the plug provided with
the equipment. If the plug will not fit into the outlet, have a proper outlet installed by a
qualified electrician.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
(10) 12-Gallon, 100 PSI Carpet Extractor
12-Gallon, 100 PSI Carpet Extractor (7)
3.0 Prepare Unit for Use
DO NOT USE ON WET SURFACES. DO NOT EXPOSE TO RAIN. STORE
INDOORS.
• All Carpet Extractors, no matter what the time of year, are shipped with antifreeze in
the solution lines. Prior to first use, fill the tank with one quart of warm water. Attach
the hose and using the hand tool wand, flush out the system by spraying the one quart
of water through the pump.
• Attach the 1-1/2 inch vacuum hose and the brass quick disconnect.
• Fill the base unit (the recovery tank must be removed) with warm water (less than
100 degrees Fahrenheit). Fill to approximately 4 inches from the top. Use a liquid
detergent made for carpet cleaning or upholstery. Read and mix to the dilution ratios
as directed.
Electrical
Plug cord(s) into 20 AMP grounded wall outlet(s). 20 AMP circuits are normally found in
kitchens and bathrooms. Never remove ground prong from the plug. If a circuit breaker
trips during operation, turn machine off, reset the breaker and move the electrical cord to
a different outlet and resume operation.
Storing your Carpet Extractor
You must winterize your carpet extractor to protect the pump system from freezing.
Damage due to freezing is not covered under the Warranty. Store your extractor in
temperatures over 40 degrees Fahrenheit. Although this is not recommended, if you plan
on storing your extractor in freezing conditions, you must prime your extractor with
antifreeze.
5.0 Problem Solving
Never operate this carpet extractor when the equipment is not performing as expected
or when any part is visibly damaged. When repair is needed, take the equipment to an
authorized service center.
System
Problem
Possible Cause
Remedy
Vacuum
System
No Vacuum
/ Weak
Vacuum
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Vacuum Tank Full
Float Shut-Off Tank Screen Dirty
Float Ball Stuck
Damaged or Loose Vacuum Hose
Dump Valve Open
Access Lid not Sealed
Vacuum Hose Clogged
Air Intake Grid Clogged
Leak in Recovery Tank
Water Coming out of Vacuum Exhaust
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Empty Tank
Clean the Screen with Water
Tap Float to Unstick then Clean
Attach or Replace
Close Valve
Replace Gasket
Clear Debris
Clean
Clean and Dry Area, Patch with Silicone
Use a Low Foaming Detergent
Electrical
System
Unit will not
Turn On
1.
2.
3.
4.
Extension Cord not Plugged In
Switch not in the “On” Position
Building Circuit Overloaded
Wiring Connections Loose
1.
2.
3.
4.
Check if Machine and Cord are Plugged In
Check Switches, Replace if Necessary
Reset Circuit
Unplug Machine and Check for Loose
Wires
Burning
Smell
1.
2.
Vacuum Motor Hung Up
Pump Motor Hung Up
1.
2.
Replace Vacuum Motor
Replace Pump
Pump is not
Running
Properly
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
Check the Electrical System
Clean Jet Filters
Clean In-Line Filter
Clear Debris
Check and Replace Hoses if Necessary
Replace Pump
Snap Quick Disconnects Together\
8.
No Power to the Pump
Jets on Wand are Clogged
In-Line Water Filter is Clogged
Debris in Solution Tank Covering Inlet
Kinked or Loose Hose
Pump Failed
Quick Disconnects are not Completely
Locked Together
Heater is Clogged with Deposits
8.
9.
10.
Pump is Pulsating
Auto Prime Valve is Open
9.
10.
Flush Heater with System Maintainer or
Replace if Necessary
Check for Clogged Jets and Clean
Close Valve
Vacuum System
The extractor uses a single vacuum motor system that provides outstanding water lift and
air flow.
Automatic Vacuum Shut-Off: The float assembly shut-off, located in the recovery tank on
the vacuum stand pipe, prevents the waste tank from overflowing into the stand pipe and
damaging the vacuum motor. The float assembly will cut-off vacuum to the waste tank.
When this happens, immediately turn off the vacuum motor and empty the waste tank.
It is also necessary to use low foaming chemicals or defoamer to eliminate foam buildup
in the recovery tank and damage to the vacuum motor. If moisture does enter the vacuum
motor, it is necessary to WD-40 the motor. Remove the float assembly from the stand
pipe and turn on both vacuum motor. Spray a five second burst of WD-40 into the stand
pipe and continue to let the vacuum motor run for three minutes.
4.0 Maintenance
Regular maintenance is required to keep your carpet extractor in proper working
condition. Thoroughly clean all equipment and accessories after each use:
Pump
System
• Rinse the solution and recover tanks with clean water.
• Flush the pump system with clean water, including all hoses and wand(s).
• Do not allow water to remain in the tanks after use.
• Lubricate all quick disconnects with WD-40 or similar lubricant.
(8) 12-Gallon, 100 PSI Carpet Extractor
12-Gallon, 100 PSI Carpet Extractor (9)