RTS KrimpVark Technical information

RTS Help Line
Dear client should you experience any
difficulties or problems on your RTS Product
(s) please feel free to contact our office at
086100 2525
Weekdays between 08H00 and 17H00
We will gladly assist you with your purchased
RTS Product (s)
This radio have been programed
with the following factory defaults:
Channel 1-8 with CTCSS 94.8 Hz
Channel 9-16 with CTCSS 131.8Hz
CONTENTS
Introduction………………………………………1
Unpacking and check devices……………………2
Accessory List……………………………………2
Main Features……………………………………3
Technical information……………………………4
Identification………………………………………6
Preparation for Using……………………………7
PC Software Programming Setting………………12
Operation Guide…………………………………13
Maintenance………………………………………17
Troubleshooting…………………………………19
Appendix: CTCSS QT and DCS DQT Chart ……22
Introduction
Thanks for purchasing RTS Krimpvark radio.
Please read this manual carefully to learn its
functions and operations before using.
With mini compact size, stable performance,
and easy-to-use feature, transceiver Krimpvark is
developed for wide using. It offers you a normal
communication when you are in the rural area, forest
zone, pasturing area or sea area. The fine appearance
of Krimpvark meets your needs of personality.
-1-
Unpacking and check the devices
Please take the radio out carefully from the
package, and check again before disposing of the
packing to make sure that all the following items are
contained in the packaging. If any of them are
missing or damaged during transportation, please
contact with the vendor for service.
Accessories list
Description
Unit
Quantity
Antenna
pc
1
Belt clip
Lithium
battery pack
Charger
pc
1
pc
1
pc
1
Wrist string
pc
1
Warranty card
pc
1
QC passed
card
pc
1
book
1
User Manual
-2-
Main Feature
1、400--470MHz full frequency
2、Chinese and English channel report
3、High and low power optional
4、wide and narrow band optional
5、CTCSS/50 and DCS/83 squelch system to
avoid the disturbance from other radio station.
6 、 VOX function ,free your hands , easy
operation
7、BCL(busy channel lock)function to know
the busy state
8、SCAN function, scan all the channels
9、Built-in FM-radio to know the latest new at
anytime.
10、power-save function to make the standby
time longer.
All the above functions are edited by PC
programming software. And the transceiver has the
following functions itself:
-3-
1. Emergency alarm function gives you more
peace.
2. Rime elimination function will eliminate
the noise when stop talking.
Technical Information
GENERAL
Frequency range
400MHz-470MHz
Number of channel
Channel spacing
Modulation method
16
12.5kHz / 25kHz
FM
Operating temperature range -10℃ --- +
55℃
Voltage
Standby Current
3.7V---4.2V
about 10mA(Save Power
State)
Size
Weight
95(H) × 53(W) × 30(D)mm
about 135g
-4-
TRANSMITTER
Frequency stabilization
≤5ppm
Output power
Emission current
Maximum frequency deviation
≤3.5W
≤1.3A
Audio distortion
Adjacent channel power
Residual radiation
±5kHz
<10%
<70dB
<-60dB
RECEIVER
Reference sensitivity
<-122dBm
(12dB SINAD)
Sensitivity lock
<-126dBm
Audio Power
Receiving current
Audio distortion
Adjacent channel selection
Intermodulation rejection
-5-
≥500mW
≤300mA
<10%
≥60dB
≥60dB
Identification
-6-
1. Pendent hole
2.Belt Clip Stator
3. Indicated Light
4. Antenna
5 .Volume Knob
6. Channel Knob;
7. Belt Clip;
8. PTT
9. Earphone Jack
10. FM Radio/Monitor/Reception+
11. Speaker
12. Call/Reception-
13. MIC
14. Charging Contact Plate
15. USB Charging Jack 16. Antenna Terminal
-7-
Preparation before Using
Install Lithium battery pack
Install the battery rear case properly as
following pictures show
Picture1
Install battery rear case
picture2
Install the battery rear case properly as
following pictures show
Picture1
picture2 picture3
Fix the belt clip
fix the belt clip properly as the following
pictures show:
-8-
Picture1
picture2
picture3
Take off the Belt Clip
Press the belt clip stator (as arrow shows) as
following picture 1 shows, push up the belt clip as
the arrow of picture 2 shows, then take off the belt
clip as picture 3 shows.
Picture1
picture2
-9-
picture3
Install the Antenna
Rotate the antenna clockwise into the antenna
terminal as the arrow of picture 1 shows, and then
tighten the antenna as picture 2 shows.
Picture1
picture2
Charging the Lithium Battery Pack
The battery pack is without completely charging
when finished, and please charge it before using.
When used for the first time after purchased or
stored over two months, the capacity of battery pack
is less than normal. However, it will return normal
after charged and discharged for three or five times.
- 10 -
Green light shines when start charging, red light
is on while it is charging and the green light indicate
that the charging is finished.
Note : KRIMPVARK has two independent
charging channels for the whole machine and
battery pack, but it cannot charge by the two way
at the same time, otherwise it will be failed
charge.
t would take about 6 hours to charge full.
Charging contact
Charging contact
Indicate light
Picture1
Picture2
- 11 -
Software programming setting
PC programming method
1.Please visit http://www.repeater.co.za and
download the Krimpvark programming software.
Operation Guide
Transmit
1.Hold 【PTT】after the red light is on to talk and
lose the button to stop.
Monitor
1. Short-press 【Radio/Monitor/Reception+】 按
to open noise in force and press it again to exit.
Audio call
1.Press 【PTT】to transmit and then
【Radio/Monitor/Reception+】to open audio call
function(1750KHz),the transceiver emits
1750KHzaudio frequency,lose
- 12 -
【Radio/Monitor/Reception+】to exit.
FM-radio function operation
1.Press 【Radio/Monitor/Reception+】功 in 2s
when heard ”di” to open FM-radio.
Press
【Radio/Monitor/Reception+】or
【Call/Reception-
】 to scan automatically, and
it will stop when coming to the radio which has
signals. For other radio station, please press
【Radio/Monitor/Reception+】or
【Call/Reception-】。
Emergency alarm
1. press【Call/Reception-】in 2s to open the
emergency alarm function. Here the red light of the
station is on and the acoustic alarm is heard and sent
to the same frequency transceiver; Press【PTT】to
stop the function.
The transceiver will remain at channel 01
when you operate the Emergency Call Function,
- 13 -
until rotate the channel selector to your desired
channel. The green indicated light will flash if
you didn’t rotate the channel selector after
operating the Emergency Call Function.
Low Power Detection
1. The device works properly, when the voltage
is higher than 3.6V;
2. When the voltage is among 3.4V to 3.5V,
the transceiver receives normally but with alerts and
“dididi” indication every 20secs, and launches
normally, but the light flashes red while launching.
3. When the voltage is below 3.3V, then the
transceiver will power off by itself.
- 14 -
Maintenance
Transceiver KRIMPVARK you purchased is an
exactitude design electronic products and please use
it carefully. Following maintenance ways may help
extend its lifetime.
1、lease don’t try to disassemble the transceiver
because non-technicians’ processing may cause
damage to the device.
2 、 Don’t use or charge the transceiver in
explosive condition(The air contains a lot of fine
sand, dust, and a place where a large number of
chemicals)
3、Turn off the transceiver when you are in gas
station.
4、Please don’t put the transceiver in sun or hot
place for long time, because the high temperature
will shorten use life of electronic parts and cause
- 15 -
distortion to plastic parts.。
5、Please keep the transceiver dry, because rain
and moisture will erode the electronic circuits.
6、Please power off the transceiver and remove
its battery pack immediately once there is peculiar
smell or smog emit from the device.
- 16 -
Troubleshooting
Trouble
No reaction
when
power-on
Unable to
talk with
other
members in
the same
group
Talking
distance is
short
Solution
z The battery pack has been
exhausted. Please change a new
battery or recharge the battery.
z The battery pack may be not
installed correctly. Please install
it again.
z Please check the frequency
and CTCSS/DCS you use are
the same as other members use
in the same group.
z The distance between you
and other group members may
be too far. Please check if you
are in the cover range of other
group transceivers
z Make sure the antenna screws
tight and contact well
z Make sure if using the
original antenna from the
manufacturer.
z The dealer or user set the
higher squelch lever, please
reduce the lever.。
- 17 -
Other (not
from group
members)
sound heard
in channels.
The battery
used out soon
after
recharged.
People
receive your
Voice is low
or broken
Water inlet
z Change the frequency
z Please change your
CTCSS/DCS NO. And it has to
change all signal sound of the
group transceivers.
z The use-life of the battery is
over, please change new battery.
z If the battery has been
completely charged
Check if the MIC hole is jammed
z Take out the battery at once
when water inlet and dump the
water, put it in a draft to dry it.
Make sure to send it to
maintenance station in a short
time.
- 18 -
Appendix:CTCSS and DCS list
50 CTCSS
67.0
85.4 107.2 136.5 165.5 186.2 210.7 254.1
69.3
88.5
110.9 141.3 167.9 189.9 218.1
71.9
91.5
114.8 146.2 171.3 192.8 225.7
74.4
94.8
118.8 151.4 173.8 196.6 229.1
77.0
97.4 123.0 156.7 177.3 199.5 233.6
79.7 100.0 127.3 159.8 179.9 203.5 241.8
82.5 103.5 131.8 162.2 183.5 206.5 250.3
83 DCS
023 051 114 143 174 251 315 371 445 532 631 723
025 054 115 152 205 261 331 411 464 546 632 731
026 065 116 155 223 263 343 412 465 565 654 732
031 071 125 156 226 265 346 413 466 606 662 734
032 072 131 162 243 271 351 423 503 612 664 743
043 073 132 165 244 306 364 431 506 624 703 754
047 074 134 172 245 311 365 432 516 627 712
- 19 -
RTS HULPLYN
Geagte klient indien u enige probleme
ondervind, skakel gerus die volgende
telefoon nommer:
086100 2525
Tussen 08H00 en 17H00 weeksdae
Ons sal u met graagte te hulp wees
U radio is soos volg geprogrammeer
Kanaal 1-8 op CTCSS 94.8 Hz
Kanaal 9-16 op CTCSS 131.8Hz
Inleiding…………………………………………1
Nagaan van verpakking………………………2
Bybehorelys……………………………………2
Hoofkenmerke…………………………………3
Tegniese informasie…………………………4
Identifikasie……………………………………6
Hoe om te gebruik………………………………7
Rekenaar sagteware ……………..…………11
Versorging…………….………………………15
Probleem Oplossing…………………………17
Bylaag: CTCSS QT en DCS DQT Tabel ……19
Inleiding
aankoop
Dankie vir die aankopp
van RTS Krimvark
lisensievrye produk. Lees asseblief hierdie boekie
sorgvuldig deur en bestudeer die funksies en hoe om
die radio te gebruik voordat u dit gebruik.
Hierdie klein kompakte tweerigtingradio is
stabiel, maklik om te gebruik, en is ontwikkel vir
verskeie gebruikers areas, bv. dit bied u uitstekende
kommunikasie in die veld, bosbou, bergklim,
strandgebiede ensovoorts.
-1-
1
NAGAAN VAN VERPAKKING
Verwyder radiotoerusting versigting uit die
verpakking. Maak seker dat hierdie toerusting en
bybehore in die verpakking is.
Behou u verpakking
vir waarborg doeleindes. Indien
In daar enige van
onderstaande item(s) weg is, beskadig is as gevolg
van vervoer, kontak u handelaar sonder versuim.
Bybehore Lys
Beskrywing
Antenna
Belt knip
Lithium Battery
pak
Laaier 230V
12V laaier
Oorfoon met
mikrofoon
Krimvark radio
Gebruikaanwysing
boekie
Eenheid
elk
elk
Hoeveelheid
1
1
elk
1
elk
elk
1
1
elk
1
elk
1
boek
1
-2-
Hoofkenmerke
1、Wye band 400--470MHz
2、Engels kanaal aankondiging
3、Hoog en lae krag uitset verstelling
4、Wye of nou bandwydte
5、CTCSS/50 en DCS/83 squelch sisteem om
mede kanaal gebruikers te voorkom of onnodige
steurnisse.
6、Handvrye stem beheerde uitsending.
7、Besige kanaal transmissie uitsluiting.
8、Skandeer funsie, skandeer alle kanale
9、Ingeboude FM radio, luister na u gunsteling
nuusstasie.
10 、 Battery besparing fasiliteit, verleng die
battery bystandkrag.
Bostaande funksies kan verader word deur
rekenaar programmering, vra u handelaar gerus
-3-
Tegniese Informasie
Algemeen
Frekwensie band
400MHz-470MHz
Aantal kanele
16
Kanaalwydte
12.5kHz / 25kHz
Modulasie metode
FM
Gebruik temperatuur
-10Ԩ --- +55Ԩ
Spanning
3.7V---4.2V
Bystand kragverbruik
omtrent 10mA
Grote
95(H) × 53(W) × 30(D)mm
Gewig
omtrent 135g
TRANSMITTER
Frekwensie stabiliteit
Uitsetkrag
Transmit kragverbruik
Maksimum deviasie
Klank versteurings
Sykanaal krag
Residual radiasie
≤5ppm
≤2 W
≤1.3A
±2.5kHz
<10%
<70dB
<-60dB
-4-
ONTVANGER
Ontvangersensitiwiteit
<-122dBm (12dB SINAD)
Sensitiwiteit oopmaak
<-126dBm
Audio klank
≥500mW
Ontvanger kragverbruik
≤300mA
Audio verwronging
<10%
Sykanaal selektiwiteit
≥60dB
Intermodulasie verwerping
≥60dB
-5-
Identifikasie
-6-
1. Hanger gaaitjie
2.Beltknip
3. Indikasie liggie
4. Antenna
5 .Volumeknop
6. Kanaalknop
7. Beltknip
8. PTT
9. Oorfoon punt
10. FM Radio/Monitor/Ontvangs+
11. Luidspreker
12. Roep/Ontvangs-
13. Mikrofoon
14. Laai kontak Punt
15. USB Laaiprop
16. Antenna Terminaal
-7-
HOE OM TE GEBRUIK
Installeer Lithium batterypak
Installeer die battery agter in die radio, volg die
sketse noukerig
Skets1
Skets2
Installeer battery klappie
Installeer die batteryklappie deeglik soos hierbo
aangewys.
Installeer beltknip
Skuif beltknip in plek soos hieronder aangedui.
-8-
Om beltknip te verwyder
Druk beltknip pennetjie soos in skets 1. Druk nou
die beltknip in die rigting van die pyltjie soos in
skets 2, verwyder nou beltknip soos in skets 3.
Skets 1
Skets 2
-9-
Skets 3
Installeer die Antenna
Skroef die antenna kloksgewys soos in skets 1 in die
antenna terminal, wees versigtig om antenna nie
oordraad te draai nie, voltooi antenna installasie soos
2
in skets 22
Skets 1
Skets 2
- 10 -
Laai van Lithium Batterypak
Die batterypak is by vervaardiging nie volledig
gelaai nie, laai batterypak nou.
Laai kontakpunte
Indikasie liggie
Skets 2
Skets 1
- 11 -
Programmering van Sagteware
Om rekenaar programmering sagteware te bekom
besoek gerus http://www.repeater.co.za,en laai die
Krimvark sagteware af.
Gebruikaanwysings
Transmit
1.Druk die uitsaaiknoppie 【PTT】 nadat die rooi
indikasie liggie begin brand, praat dan, sodra u
klaar gepraa,t het los die uitsaaiknoppie.
Monitor
1. Druk vinnig 【Radio/Monitor/Ontvangs+】
Knoppie om na geraas te luister druk weer om
te herstel.
2. Audio oproep
1.Druk 【PTT】en ook
【Radio/Monitor/Reception+】om die audio roep te
aktiveer. Die radio sal nou ‘n audio sein van
- 12 -
1750KHz uitsaai terwyl u die
【Radio/Monitor/Ontvangs+】inhou.
FM-radio aaanskakeling
1.Druk 【Radio/Monitor/Ontvangs+】knoppie in
vir 2sekondes totdat u ”di” klank hoor, nou is
die FM-radio aangeskakel
2. Druk【Radio/Monitor/Ontvangs+】of
【Roep/Ontvangs-
】 om outomaties te soek
vir ‘n FM radiostasie, indien u na ‘n ander
radiostasie wil soek druk
【Radio/Monitor/Ontvangs+】of
【Roep/Ontvangs-】。weer.
Nood Alarm
1. Druk 【Roep/Ontvangs-】 knoppie vir meer as
2sekondes om alarm te maak. Die rooi indikasie
liggie sal nou flikker, die alarm word uitgesaai op
kanaal 01 en u sal ook ‘n alarm klank oor die
- 13 -
luidspreker hoor. Druk die【PTT】om alarm te
kanselleer.
Die radio sal op kanaal 01 bly totdat u
die
kanaal selekteerde knoppie draai. Die Groen
indikasie ligie sal flikker tot en met u die kanaal
verander.
Lae Battery Indikasie
1. Die radio funksioneer normaalweg wanneer die
battery spanning bokant 3.6V is;
2. Wanneer die battery spanning tussen 3.4V tot
3.5V is, sal die radio normaalweg funksioneer
maar u sal ‘n “dididi” klank hoor so elke
20sekondes, en die indikasie liggie flikker rooi.
3. Wanneer die battery spanning onder 3.3V is, sal
die radio outomaties afskakel.
- 14 -
Versorging
Krimpvark tweerigting radio wat u aangekoop
het
is
‘n
elektroniese
apparaat.
Volg
onderstaande versorging om sodoende die lewe
van u toerusting te verleng.
1. Moet asseblief nie prober om die radio
produk oop te maak nie, aangesien daar binne-in
geen versienbare onderdele is nie.
2、Moet die radio nie in fyn stowwerige gebied
of waar daar fyn ystervylsels kan wees gebruik nie.
Ook nie in ‘n gebied waar daar chemikalie is nie.
3 、 Skakel u tweerigtinradio af wanneer u
brandstof
ingooi.
4、Moet nie die tweerigtingradio in die son of in
warm area vir lang periodes los nie. Hoe temperature
sal die elektroniese onderdele se lewe verkort. Dit
kan ook die plastiese omhulsel versteur.
- 15 -
5、Hou die tweerigtingradio droog, want reen en
water kan die elektroniese stroombane beskadig.
6、 Skakel die tweerigtingradio onmiddellik af
indien daar rook of reuke uit die radio kom.
- 16 -
Probleem oplossing
Probleem
Geen
Oplossing
reaksie
wanneer
die
z Die batterypak is pap. Vervang
of herlaai batterypak.
radio
z
aangeskakel
behoorlik
word nie.
Herinstalleer die batterypak.
Die batteypak is moontlik nie
ge-installeer
nie.
z Maak seker dat u radio met die
Kan nie met
ander radios
kommunikeer
nie.
ander radio se kanaal
verstellings
dieselfde is. Asook dieselfde
CTCSS/DCS group.
z Dat die afstand tussen u radio en
die ander radios binne ontvangs
gebied is.
z Maak seker dat die antenna
Radio praat
behoorlik ingeskroef is en goeie
net kortafstand
kontak maak
z Maak seker dat u die
- 17 -
oorspronklike antenna van die
vervaardiger gebruik,
z Die handelaar het moontlik die
radio verkeerd geprogrammeer
U hoor ander
gebruikers
z
z
Verander u radio se kanaal
Neem u radios en u groep se
radios in vir herprogrammering.
z Die battery se lewe is verby,
Die battery hou
vervang die battery asb.
nie lank nie.
z Die battery was nie volledig
gelaai nie, herlaai battery.
Ander
radios
onvang u radio
sag of gebroke
Maak seker dat die mikrofoon
gaaitjie oop is.
z Haal die battery dadelik uit. Maak
Radio vol water
droog onder ‘n waaier. Stuur radio so
gou as moontlik na RTS toe vir
herstelwerk.
- 18 -
Aanhangsel:CTCSS en DCS Lys
50 CTCSS
67.0
69.3
71.9
74.4
77.0
79.7
85.4
88.5
91.5
94.8
97.4
100.0
107.2
110.9
114.8
118.8
123.0
127.3
136.5
141.3
146.2
151.4
156.7
159.8
165.5
167.9
171.3
173.8
177.3
179.9
186.2
189.9
192.8
196.6
199.5
203.5
210.7 254.1
218.1
225.7
229.1
233.6
241.8
82.5 103.5 131.8 162.2 183.5 206.5 250.3
83 DCS
023 051 114 143 174 251 315 371 445 532 631 723
025 054 115152 205 261 331 411 464 546 632 731
026 065 116 155 223 263 343 412 465 565 654 732
031 071 125 156 226 265 346 413 466 606 662 734
032 072 131 162 243 271 351 423 503 612 664 743
043 073 132 165 244 306 364 431 506 624 703 754
047 074 134 172 245 311 365 432 516 627 712
- 19 -