RF4289HB
Refrigerator
user manual
This manual is made with 100 % recycled paper.
English
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive more complete service or accessory parts,
please register your product at or contact
www.samsung.com/register
1-800-SAMSUNG (726-7864)
Free Standing Appliance
DA68-02520B-03.indb 1
13. 4. 25. �� 2:27
safety information
SAFETY INFORMATION
• Before operating the appliance, please read
this manual thoroughly and retain it for your
reference.
• Use this appliance only for its intended purpose
as described in this instruction manual.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Warnings and Important Safety Instructions in
this manual do not cover all possible conditions
and situations that may occur.
It is your responsibility to use common sense,
caution, and care when installing, maintaining,
and operating your appliance.
• Because these following operating instructions
cover various models, the characteristics of
your refrigerator may differ slightly from those
described in this manual.
R600a or R134a is used as a refrigerant.
Check the compressor label on the rear of
the appliance or the rating label inside the
fridge to see which refrigerant is used for
your refrigerator. When this product contains
flammable gas (Refrigerant R600a), contact
your local authority in regard to safe disposal of
this product.
Make sure the refrigerator is grounded to
prevent electric shock.
Call the contact center for help.
Note.
These warning signs are here to prevent injury
to you and others.
Please follow them carefully.
After reading this section, keep it in a safe
place for future reference.
CE Notice
This product has been determined to be in
compliance with the Low Voltage Directive
(2006/95/EC), the Electromagnetic Compatibility
Directive (2004/108/EC), Commission Delegated
Regulation (EU) No 1060/2010 and the Eco-Design
Directive(2009/125/EC) implemented by Regulation
(EC) No 643/2009 of the European Union. (For
products sold in European Countries only)
WARNING
•
Important safety symbols and
precautions:
WARNING
Hazards or unsafe practices that may result in
severe personal injury or death.
•
CAUTION
Hazards or unsafe practices that may result in
minor personal injury or property damage.
--
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
--
SEVERE WARNING SIGNS FOR
TRANSPORTATION AND SITE
• When transporting and installing the
appliance,care should be taken to ensure
that no parts of the refrigerating circuit
are damaged.
R600a or R134a is used as a refrigerant.
Check the compressor label on the rear of
the appliance or the rating label inside the
refrigerator to see which refrigerant is used for
your refrigerator.
When this product contains flammable gas
(Refrigerant R600a),
Refrigerant leaking from the pipe work could
ignite or cause an eye injury. If a leak is
detected, avoid any naked flames or potential
sources of ignition and air the room in which the
appliance is standing for several minutes.
In order to avoid the creation of a flammable
gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which the
appliance may be sited depends on the amount
of refrigerant used.
Unplug the power plug from the wall socket.
02_ safety information
DA68-02520B-03.indb 2
13. 4. 25. �� 2:27
-- Never start up an appliance showing any signs
of damage. If in doubt, consult your dealer.
The room where the refrigerator will be sited
must be 1 m³ in size for every 8 g of R600a
refrigerant inside the appliance. The amount of
refrigerant in your particular appliance is shown
on the identification plate inside the appliance.
-- If the appliance contains isobutane refrigerant
(R600a), a natural gas with high environmental
compatibility that is, however, also combustible.
When transporting and installing the appliance,
care should be taken to ensure that no parts of
the refrigerating circuit are damaged.
WARNING
-•
•
--
-•
•
•
-•
-•
-•
SEVERE WARNING SIGNS FOR
INSTALLATION
• Do not install the refrigerator in a damp
place or place where it may come in
contact with water.
Deteriorated insulation of electrical parts may
cause an electric shock or fire.
Do not place this refrigerator in direct sunlight or
expose to the heat from stoves, room heaters
or other appliances.
Do not plug several appliances into the same
multiple power board.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matched the rating plate.
This provides the best performance and
also prevents overloading house wiring
circuits, which could cause a fire hazard from
overheated wires. If the wall socket is loose, do
not insert the power plug.
There is a risk of electric shock or fire.
Do not use a cord that shows cracks or
abrasion damage along its length or at either
end.
Do not bend the power cord excessively or
place heavy articles on it.
Do not use aerosols near the refrigerator.
Aerosols used near the refrigerator may cause
an explosion or fire.
Do not install this appliance in a location where
gas may leak.
This may result in an electric shock or fire.
Plug the power plug into the wall socket firmly.
Do not use a damaged power plug, damaged
power cord or loose wall socket.
This may result in an electric shock or fire.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe,
plastic water pipe, or telephone line.
-- You must ground the refrigerator to prevent any
power leakages or electric shocks caused by
current leakage from the refrigerator.
-- This may result in an electric shock, fire,
explosion, or problems with the product.
-- Never plug the power cord into a socket that is
not grounded correctly and make sure that it is
in accordance with local and national codes.
• Do not pull or excessively bend the power cord.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects, or
push the power cord into the space behind the
appliance.
-- When moving the refrigerator, be careful not to
roll over or damage the power cord.
-- This may result in an electric shock or fire.
• This appliance should be positioned in such a
way that it is accessible to the power plug.
-- Failing to do so may result in an electric shock
or fire due to electric leakage.
• Do not install this appliance near a heater,
inflammable material.
• Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
• When disposing of this or other refrigerator/s,
remove the door/door seals, door latch so that
children or animals cannot become trapped
inside.
Children should be supervised to ensure that
they do not enter and play with the appliance.
-- If trapped inside, the child may become injury
and suffocate to death.
Never put fingers or other objects into the
dispenser hole, ice chute and ice maker bucket.
-- It may cause a personal injury or material
damage.
• The installation or any service of this
appliance is recommended by a qualified
technician or service company.
-- Failing to do so may result in an electric shock,
fire, explosion, problems with the product, or
injury.
• Do not stand on top of the appliance or place
objects (such as laundry, lighted candles, lighted
cigarettes, dishes, chemicals, metal objects,
etc.) on the appliance.
-- This may result in an electric shock, fire,
problems with the product, or injury.
safety information _03
DA68-02520B-03.indb 3
13. 4. 25. �� 2:27
-- The installation or any service of this appliance
is recommended by a qualified technician or
service company.
-- Failing to do so may result in an electric shock,
fire, explosion, problems with the product, or
injury.
-- Do not touch the power plug with wet hands.
-- This may result in an electric shock.
• This refrigerator must be properly installed and
located in accordance with the manual before it
is used.
• Connect the power plug in proper position with
the cord hanging down.
-- If you connect the power plug upside down,
wire can get cut off and a cause fire or an
electric shock.
• Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
-- This constitutes a fire hazard.
• The appliance must be positioned so that the
plug is accessible after installation.
• The refrigerator must be grounded.
-- You must ground the refrigerator to
prevent any power leakages or electric
shocks caused by current leakage from
the refrigerator.
• Never use gas pipes, telephone lines or other
potential lightening rods as ground.
-- Improper use of the ground plug can result in
an electric shock.
• If the power cord is damaged,
have it replaced immediately by the
manufacturer or its service agent.
• The fuse on the refrigerator must be changed
by a qualified technician or service company.
-- Failing to do so may result in an electric shock
or personal injury.
CAUTION
CAUTION SIGNS FOR
INSTALLATION
• Keep ventilation opening in the appliance
enclosure or mounting structure clear of
obstruction.
• Allow the appliance to stand for 2 hours after
installation.
WARNING
•
--
•
-•
-•
•
-•
-•
---
--
--•
-•
•
-•
SEVERE WARNING SIGNS FOR
USING
• Do not insert the power plug with wet
hands.
Do not store articles on the top of the appliance.
When you open or close the door, the articles
may fall and cause a personal injury and/or
material damage.
Do not put items filled with water on the
refrigerator.
If spilled, there is a risk of fire or electric shock.
Do not let children hang on the door.
Failure to do so may cause serious personal
injury.
Do not leave the doors of the refrigerator open
while the refrigerator is unattended and do not
let children enter inside the refrigerator.
Do not allow babies or children go inside the
drawer.
It can cause death from suffocation by
entrapment or personal injury.
Do not sit on the Freezer door.
The door may be broken and cause a personal
injury.
Do not put a container filled with water on the
refrigerator.
If spilled, there is a risk of fire or electric shock.
Do not use or place any substances sensitive
to temperature such as inflammable sprays,
inflammable objects, dry ice, medicine, or
chemicals near or inside of the refrigerator.
Do not keep volatile or inflammable objects or
substances (benzene, thinner, propane gas,
alcohol, ether, LP gas and other such products
etc.) in the refrigerator.
This refrigerator is for storing food only.
This may result in fire or explosion.
Do not store pharmaceuticals products, scientifi
c materials or temperature-sensitive products in
the refrigerator.
Products that require strict temperature controls
must not be stored in the refrigerator.
If you smell pharmaceutical or smoke, pull
out power plug immediately and contact your
Samsung Electronics service center.
If any dust or water is in Refrigerator, pull
out power plug and contact your Samsung
Electronics service center.
Otherwise there is a risk of fire.
If gas leak is detected, avoid any naked flames
or potential sources of ignition and air the room
in which the appliance is standing for several
04_ safety information
DA68-02520B-03.indb 4
13. 4. 25. �� 2:27
minutes.
• Do not attempt to repair, disassemble, or
modify the appliance yourself.
-- Do not use any fuse (such as cooper, steel wire,
etc.) other than the standard fuse.
-- When repairing or reinstalling the appliance is
required, contact your nearest service center.
-- Failing to do so may result in an electric shock,
fire, problems with the product, or injury.
• To prevent children entrapment, you must
reinstall the divider using provided screws after
cleaning or other actions if you removed the
divider from the drawer.
• Never put fingers or other objects into the
dispenser hole.
-- Failure to do so may cause personal injury or
material damage.
• Do not store volatile or flammable substances
such as benzene, thinner, alcohol, ether or LP
gas in the refrigerator.
-- The storage of any of such products may cause
an explosion.
• Do not store low temperature-sensitive
pharmaceutical products, scientific materials or
other low temperature-sensitive products in the
refrigerator.
-- Products that require strict temperature controls
must not be stored in the refrigerator.
• Do not place or use electrical appliance inside
the refrigerator, unless they are of a type
recommended by the manufacturer.
• Do not use a hair dryer to dry the inside of the
refrigerator.
Do not place a lighted candle in the refrigerator
for removing bad odors.
-- This may result in an electric shock or fire.
• Do not touch the inside walls of the freezer or
products stored in the freezer with wet hands.
-- This may cause frostbite.
• Do not use mechanical devices or any other
means to accelerate the defrosting process,
other than those recommended by the
manufacturer.
• Do not damage the refrigerant circuit.
• Never put fingers or other objects into the
dispenser hole, ice chute and ice maker bucket.
-- It may cause a personal injury or material
damage.
• This product is intended only for
the storage of food in a domestic
environment.
• Bottles should be stored tightly together so that
they do not fall out.
• In the event of a gas leak (such as propane
gas, LP gas, etc.), ventilate immediately without
touching the power plug.
Do not touch the appliance or power cord.
-- Do not use a ventilating fan.
-- A spark may result in an explosion or fire.
• Use only the LED Lamps provided by
manufacturer or service agent.
• If the products is equipped with the LED Lamp,
do not disassemble Lamp Cover and LED
Lamp by yourself.
-- Please contact your service agent.
• Use only the LED Lamps provided by
manufacturer or service agent.
• Never stare directly at the UV LED lamp for long
periods of time.
-- This may result in eye strain due to the
ultraviolet rays.
• Children should be supervised to ensure that
they do not play with the appliance.
Keep fingers out of “pinch point” areas :
clearances between the doors and cabinet are
necessarily small. Be careful when you open the
doors when children are in the area.
• Do not let children hang on the door.
If not, a serious injury may occur.
• There is a Risk of children entrapment.
Do not let children enter inside the refrigerator.
• Do not disassemble or repair the
refrigerator by yourself.
-- You run a risk of causing a fire, malfunction and
/ or personal injury.
In case of malfunction, please contact your
service agent.
-•
•
-•
• If the appliance generates a strange
noise, a burning or smell or smoke,
unplug the power plug immediately and
contact your nearest service center.
Failing to do so may result in an electric or fire
hazards.
If you experience difficulty when changing the
light, contact service agent.
If the products is equipped with the LED Lamp,
do not disassemble the Lamp Cover and LED
Lamp by yourself.
Please contact your service agent.
If any dust or water is in the refrigerator, pull
out power plug and contact your Samsung
safety information _05
DA68-02520B-03.indb 5
13. 4. 25. �� 2:27
Electronics service center.
-- There is a risk of fire.
• If any foreign substance such as water has
entered the appliance, unplug the power plug
and contact your nearest service center.
-- Failing to do so may result in an electric shock
or fire.
CAUTION
--
--•
--
•
--
•
--
•
•
•
•
•
CAUTION SIGNS FOR USING
• To get best performance from the
product,
Do not place foods too closely in front of the
vents at the rear of the appliance as it can
obstruct free air circulation in the refrigerator
compartment.
Wrap the food up properly or place it in airtight
containers before putting it into the refrigerator.
Do not put any newly introduced food for
freezing near to already existing food.
Do not place carbonated or fizzy drinks in the
freezer compartment.
Do not put bottles or glass containers in the
freezer.
When the contents freeze, the glass may
break and cause personal injury and property
damage.
Do not change or modify the functionality of the
refrigerator.
Changes or modifications may result in a
personal injury and/or property damage.
Any changes or modifications performed by
a 3rd party on this completed appliance are
neither covered under Samsung warranty
service, nor is Samsung responsible for safety
issues and damages that result from 3rd party
modifications.
Do not block air holes.
If the air holes are blocked, especially with a
plastic bag, the refrigerator can be over cooled.
If this cooling period lasts too long, the water
filter may break and cause water leakage.
Please observe maximum storage times and
expiry dates of frozen goods.
Fill the water tank, ice tray, water cubes only
with potable water.
Use only the ice-maker provided with the
refrigerator.
The water supply to this refrigerator must only
be installed/connected by a suitably qualified
person and connected to a potable water
supply only.
In order to operate the ice-maker properly,
water pressure of 138 ~ 862 kPa is required.
• Do not spray volatile material such as
insecticide onto the surface of the appliance.
-- As well as being harmful to humans, it may also
result in an electric shock, fire or problems with
the product.
• Do not use a hair dryer to dry the inside of the
refrigerator. Do not place a lighted candle in the
refrigerator for removing bad others.
-- This may result in an electric shock or fire.
• DANGER : Risk of child entrapment, Before you
throw away your old refrigerator or freezer.
-- Take off the doors.
-- Leave the shelves in place so that children may
not easily climb inside.
• WARNING : Improper use of the grounding plug
can result in a risk of an electric shock.
-- If it is necessary to use an extension cord, use
only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will
accept the plug on the appliance. The marked
rating of the extension cord should be AC 115120 V, 10 A, or more. If a grounding adapter
is used, make sure the receptacle box is fully
grounded.
CAUTION
-•
--•
-•
--
CAUTION SIGNS
FOR CLEANING AND
MAINTENANCE
• Do not directly spray water inside or
outside the refrigerator.
There is a risk of fire or electric shock.
Do not use or place any substances sensitive
to temperature such as inflammable sprays,
inflammable objects, dry ice, medicine, or
chemicals near the refrigerator.
Do not keep volatile or inflammable objects or
substances (benzene, thinner, propane gas,
etc.) in the refrigerator.
This refrigerator is for storing food only.
This may result in a fire or an explosion.
Do not spray cleaning products directly on the
display.
Printed letters on the display may come off.
Remove any foreign matter or dust from the
power plug pins.
But do not use a wet or damp cloth when
cleaning the plug, remove any foreign material
or dust from the power plug pins.
Otherwise there is a risk of fire or electric shock.
06_ safety information
DA68-02520B-03.indb 6
13. 4. 25. �� 2:27
• Unplug the refrigerator before cleaning
and performing maintenance.
WARNING
•
•
•
•
•
•
SEVERE WARNING SIGNS FOR
DISPOSAL
• Ensure that none of the pipes on the
back of the appliance are damaged prior
to disposal.
R600a or R134a is used as a refrigerant.
Check the compressor label on the rear of the
appliance or the rating label inside the refrigerator
to see which refrigerant is used for your
refrigerator.
When this product contains flammable gas
(Refrigerant R600a), contact your local authority
in regard to safe disposal of this product.
Cyclopentane is used as an insulation blowing
gas.
The gases in insulation material require special
disposal procedure.
Please contact your local authorities in regard to
the environmentally safe disposal of this product.
Ensure that none of the pipes on the back of the
appliances are damaged prior to disposal.
The pipes shall be broken in the open space.
When disposing of this product or other
refrigerators, remove the door/door seals, door
latch so that small children or animals cannot
become trapped inside.
Leave the shelves in place so that children may
not easily climb inside.
Ensure that none of the pipes on the back of
the appliance are damaged prior to disposal.
R600a or R134a is used as a refrigerant.
Check the compressor label on the rear of
the appliance or the rating label inside the
fridge to see which refrigerant is used for your
refrigerator.
When this product contains flammable gas
(Refrigerant R600a) contact your local authority
in regard to safe disposal of this product.
Cyclopentane used as an insulation blowing
gas. The gases in insulation material require
special disposal procedure.
Please contact your local authorities in regard
to the environmentally safe disposal of this
product.
Ensure that none of the pipes on the back of
the appliances are damaged prior to disposal.
The pipes shall be broken in the open space.
Please dispose of the packaging material for
this product in an environmentally friendly
manner.
Allow the appliance to stand for 2 hours after
installation.
• To get Best performance from the product,
-- Do not place foods too closely in front of
the vents at the rear of the appliance as it
can obstruct free air circulation in the freezer
compartment.
-- Wrap the food up properly or place it in airtight
containers before putting it into the fridge or
freezer.
-- Do not put any newly introduced food for
freezing near to already existing food.
• Do not place glass or bottles or carbonated
beverages into the freezer.
-- The container may freeze and break, and this
may result in injury.
• Please observe maximum storage times and
expiry dates of frozen goods.
• There is no need to disconnect the refrigerator
from the power supply if you will be away for
less than three weeks.
But, Remove all the food if you are going away
for the three weeks or more.
• Unplug the refrigerator and clean it, rinse and
dry.
• Remove all foreign substances such as dust
or water from the power plug terminals and
contact points using a dry cloth on a regular
basis.
-- Unplug the power plug and clean it with a dry
cloth.
-- Failing to do so may result in an electric shock
or fire.
• Before cleaning or performing maintenance,
unplug the appliance from the wall socket.
-- Failing to do so may result in an electric shock
or fire.
• Do not clean the appliance by spraying water
directly onto it.
• Do not use benzene, thinner or alcohol to clean
the appliance.
-- This may result in discoloration, deformation,
damage, electric shock or fire.
• Do not spray inflammable gas near the
refrigerator.
-- There is a risk of explosion or fire.
• Contains fluorinated greenhouse gases covered
by the Kyoto Protocol.
-- Hermetically sealed system.
-- Do not vent gases into the atmosphere.
-- Refrigerant type : R-134a
-- Quantity : 0.16 kg
-- Global Warming Potential (GWP) = 1300
• To get more space, you can remove top freezer
safety information _07
DA68-02520B-03.indb 7
13. 4. 25. �� 2:27
drawers since it does not affect thermal and
mechanical characteristics. A declared storage
volume of frozen food storage compartment is
calculated with these drawers removed. To get
the best energy efficiency of this product, please
leave all selves, drawers and baskets on their
original position like as above illustration. When
you use this function the energy consumption
of the refrigerator will increase. Remember to
turn it off when you don’t need it and return the
freezer to your original temperature setting.
• Power freezing
-- If you need to freeze large amount of food stuff,
activate Power Freeze function at least 24 hours
before.
ADDITIONAL TIPS FOR PROPER
USAGE
• In the event of a power failure, call the local
office of your Electricity Company and ask how
long it is going to last.
-- Most power failures that are corrected within
an hour or two will not affect your refrigerator
temperatures.
However, you should minimize the number of
door openings while the power is off.
-- Should the power failure last more than
24 hours, remove all frozen food.
• If keys are provided with the refrigerator, the
keys should be kept out of the reach of children
and not be in the vicinity of the appliance.
• The appliance might not operate consistently
(possibility of temperature becoming too warm
in the refrigerator) when sited for an extended
period of time below the cold end of the range
of temperature for which the refrigerating
appliance is designed.
• Do not store food which spoils easily at low
temperature, such as bananas, melons.
• Your appliance is frost free, which means there
is no need to manually defrost your appliance,
as this will be carried out automatically.
• Temperature rise during defrosting can comply
with ISO requirements.
But if you want to prevent an undue rise in the
temperature of the frozen food while defrosting
the appliance, please wrap the frozen food up
in several layers of newspaper.
• Any increase in temperature of frozen food
during defrosting can shorten its storage life.
Saving Energy Tips
-- Install the appliance in a cool, dry room with
adequate ventilation.
Ensure that it is not exposed to direct sunlight
and never put it near a direct source of heat
(radiator, for example).
-- Never block any vents or grilles on the
appliance.
-- Allow warm food to cool down before placing it
in the appliance.
-- Put frozen food in the refrigerator to thaw.
You can then use the low temperatures of the
frozen products to cool food in the refrigerator.
-- Do not keep the door of the appliance open for
too long when putting food in or taking food
out. The shorter time for which the door is
open, the less ice will form in the freezer.
-- Clean the rear of the refrigerator regularly.
Dust increases energy consumption.
-- Do not set temperature colder than necessary.
-- Ensure sufficient air exhaust at the refrigerator
base and at the back wall of the refrigerator.
Do not cover air vent openings.
-- Allow clearance to the right, left, back and top
when installing.
This will help reduce power consumption and
keep your energy bills lower.
-- To get the best energy efficiency of this product,
please leave all selves, drawers and baskets on
their original position like as above illustration.
08_ safety information
DA68-02520B-03.indb 8
13. 4. 25. �� 2:27
1. Regulatory Notice
1.1 FCC Notice
CAUTION
FCC CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Contains Transmitter Module FCC ID: A3LDNURS11
This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference that cause undesired
operation.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
FCC STATEMENT:
This equipment has been tested and found to comply within the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a different circuit from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator
and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.
SAVE THESE INSTRUCTIONS
safety information _09
DA68-02520B-03.indb 9
13. 4. 25. �� 2:27
1. Regulatory Notice
1.2 IC Notice
Contains Transmitter Module IC: 649E-DNURS11
The term “IC” before the radio certification number only signifies that Industry Canada technical
specifications were met. Operation is subject to the following two conditions : (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
IC RADIATION EXPOSURE STATEMENT:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body. This device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter.
SAVE THESE INSTRUCTIONS
10_ safety information
DA68-02520B-03.indb 10
13. 4. 25. �� 2:27
Contents
Setting up your French Door
Refrigerator
GETTING READY TO INSTALL THE
REFRIGERATOR
5 cm
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
efficiencies that this new appliance offers.
Selecting the best location for the
refrigerator
•
•
•
•
A location with easy access to a water supply.
A location without direct exposure to sunlight.
A location with a leveled floor.
A location with enough space for the refrigerator
doors to open easily.
• A location that allows sufficient space to the
right, left, back and top for air circulation.
• A location that allows you to move the
refrigerator easily if it needs maintenance or
service.
01setting up
SETTING UP YOUR FRENCH DOOR REFRIGERATOR…………………………… 11
OPERATING YOUR FRENCH DOOR REFRIGERATOR…………………………… 18
TROUBLESHOOTING…………………………………………………………………… 85
WARRANTY……………………………………………………………………………… 88
10 cm
5 cm
If the refrigerator does not have enough space, the
internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra
space at the back for the water line connections.
When you install the refrigerator next to a fixed wall,
you need a minimum clearance of 95 mm between
the refrigerator and wall to allow the door to swing
open.
First thing! Make sure that you can easily move
your refrigerator to its final location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
The following chart details the exact height and
depth of this Samsung French Door Refrigerator.
Overall
Depth
Height
“E”
“D”
33 6/8 ” 35 6/8 ” 68 1/2 ” 69 6/8 ” 36 2/8 ”
RF4289HB
(858 mm) (908 mm) (1740 mm) (1774 mm) (920 mm)
Model
Depth
“A”
Width
“B”
Height
“C”
setting up _11
DA68-02520B-03.indb 11
13. 4. 25. �� 2:27
• Allow clearance to the
right, left, back and top
when installing.
This will help reduce
power consumption and
keep your energy bills
lower.
• Do not install the refrigerator where the
temperature will go below 10 ºC.
• Do not locate the refrigerator where it may
become wet.
ACCESSORIES AND REQUIRED
TOOLS
B
A
C
E
D
When moving your refrigerator
CAUTION
To prevent floor damage, be sure the front
adjusting legs are in the up position (above
the floor).
Refer to ‘Adjusting the doors’ in the
manual (on page 14).
The following accessories are included with your
refrigerator:
Hex wrench
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screwdriver (+)
Pliers
Flat-blade screw
driver(-)
Fastener
Flat-blade
screwdriver (-)
Socket wrench
(10 mm)
Allen wrench (5 mm)
Control Lever
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately165 kg.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When
moving the refrigerator, you need to pull and push
it straight forwards or back. Do not wiggle it from
side to side.
REMOVING THE REFRIGERATOR
DOORS
For some installations you need to remove the
fridge and flex doors and the freezer drawer so
you can move the refrigerator to its final location.
Do not remove the doors/drawer if you don’t need
to. If you do not need to remove the refrigerator
doors, go to Adjusting the Level on page 9. If you
need to remove the doors. continue below. Before
removing the door/drawer, make sure you read the
following items:
WARNING
•
•
----
Disconnect power to the refrigerator before
removing the doors or drawer.
• Be careful not to drop, damage, or
scratch the doors/drawer while removing
them.
Be careful not to injure yourself while removing
the doors/drawer.
Reattach the doors/drawer properly to avoid:
Moisture from air leakage.
Uneven door alignment.
Wasting energy due to improper door seal.
12_ setting up
DA68-02520B-03.indb 12
13. 4. 25. �� 2:27
Disassemble the refrigerator doors
WARNING
4. Lift the door straight up to remove.
Be careful not to drop and scratch the
doors while removing the doors.
5. Remove the screw ( 10 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 11 ) attached to the lower left and right door
hinges with an allen wrench (5 mm). Remove
the lower left and right door hinges ( 12 ).
2
01setting up
1. With the door opened, remove the cap top
table ( 1 ) with a flat-blade screwdriver (-), and
then close the door.
Remove the 3 screws holding down the
top table ( 2 ) and turn it with several wires
connected.
12
10
1
11
2. Disconnect one connector ( 3 ) on the right side
door and one connector ( 4 ) on the left side
door. Remove the water line ( 5 ) while pressing
the dark gray part ( 6 ) of the water line coupler.
4
Red Clip
(1/4 ")
3
5
6
CAUTION
If a red clip is on the coupler, it must be
removed before removing the tube.
3. Remove the 3 hex head bolts ( 7 ) attached
to the upper left and right door hinges with a
socket wrench (10 mm).
Remove the ground screw ( 8 ) attached to the
upper left and right door hinges with a philips
screwdriver (+). Remove the upper left and right
door hinges ( 9 ).
Allen wrench
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble parts in
reverse order.
1. The Water Line must be fully inserted to the
center of transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
2. Insert the clip in the install pack and check that
it holds the line firmly.
Type A
Type B
Dispenser
Center of Transparent coupler
clip A (1/4 ”)
(6.35 mm)
The Guide Lines
clip A (1/4 ”)
(6.35 mm)
Socket wrench
8
7
9
DISASSEMBLE THE FLEX DOOR
1. Take out the Flex Zone
( 1 ) by lifting it up.
1
setting up _13
DA68-02520B-03.indb 13
13. 4. 25. �� 2:27
2. Take off the cover ( 2 )
w/harness with a flatblade screwdriver (-).
2
3. Press the
locking tab and
separate the Wire
Connector.
CAUTION
When reassembling it, be sure to connect
the wire harness. If it is not connected, the
Flex Room does not work.
4. Remove 2 hex head
bolts from the sides
with a socket wrench
(10 mm).
2. Remove the tilting
pocket ( 1 ) by
pulling both support
guards ( 2 ) aside.
And take out both
support guards by
pulling them aside.
3. Take out the lower
basket ( 3 ) by lifting the
basket up from the rail
system.
1
2
3
4. Remove 4 hex head bolts
from both sides with a
socket wrench (10 mm).
5. Lift up the freezer door
from the rails.
5. Lift up the Flex door from
the rails.
CAUTION
Putting too much food into the freezer
drawers can prevent the freezer from
closing completely and can cause frost
build-up.
ASSEMBLE THE FLEX DOOR
To reattach the flex door after you have moved the
fridge to its final location, assemble parts in reverse
order.
Be sure to connect the Flex Door Wire
CAUTION Connector. If it is not connected, the Flex
Room does not work.
DISASSEMBLE THE FREEZER
DRAWER
1. Take out the upper
drawer by lifting it up.
ASSEMBLE THE FREEZER
DRAWER
To reattach the drawer after you have moved the
fridge to its final location, assemble parts in reverse
order.
LEVELING THE REFRIGERATOR
Make sure the refrigerator is level so that you can
make final adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
14_ setting up
DA68-02520B-03.indb 14
13. 4. 25. �� 2:27
If the refrigerator is not level, it will not be possible
to get the doors perfectly even, which may cause
moisture condensation and increased energy bills.
Below is an example of how to level the refrigerator
if the left side of the refrigerator is lower than the
right side.
MAKING MINOR ADJUSTMENTS
BETWEEN DOORS
Remember, a leveled refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
leveling the refrigerator.
How to adjust the level
2
2. Remove the two screws
( 1 ) attached to the front
leg cover ( 2 ) with a Philips
screwdriver (+).
01setting up
1. Open the freezer drawer
and remove the lower
basket. (See to page 16.)
1
Fixed part
3. Remove the front leg cover
( 2 ) by lifting the bottom
part of the front leg cover
up and pulling it out.
4. Insert a flat-blade screwdriver (-) into a notch on
the left control lever, and turn it count clockwise
to level the refrigerator.
(You turn the lever clockwise to lower the
refrigerator and counterclockwise to raise it.)
Adjustment
part
The left door is fixed. To make minor
adjustments between doors, adjust only
the right door.
1. Pull out the Flex Zone door ( 1 ) to expose the
lower hinge ( 2 ).
2. Insert the supplied allen wrench (3/16 ”) ( 3 )
into the shaft ( 4 ) of the lower hinge.
3. Adjust the height by turning the hex wrench ( 3 )
DOWN
clockwise (
) or counter-clockwise ( UP ).
2
3
4
3
1
Flat-Blade Screwdriver(-)
CAUTION
Control Lever
Both control levers must be touching the
floor to avoid possible personal injury or
property damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the front leg
cover from the refrigerator, so we do not
recommend making small adjustments
wIth the control lever.
Instead, refer to the next page for the best
way to make minor adjustments to the
doors.
When you turn the hex wrench counterclockwise ( ), the door will move up.
1. After adjusting the doors, insert the supplied
fastener ( 6 ) using a pliers ( 5 ) in the gap
between the hinge-grommet ( 7 ) and the lower
hinge ( 8 ). The number of fasteners you’ll need
to insert depends on the gap.
2 fastener are enclosed with the
refrigerator.
The thickness of each fastener is 0.04 ”.
setting up _15
DA68-02520B-03.indb 15
13. 4. 25. �� 2:27
ADJUSTING THE FREEZER
DRAWER LEVEL
Adjustment part
Freezer Drawer
1. Locate the height-adjuster ( 1 ) in the freezer
drawer. Unscrew the 8 Phillips screws ( 2 )
slightly to loosen the door.
1
2
2. Loosen the controller screw
( 3 ) with a Phillips screwdriver
(+).
INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a filter is one of the helpful
features on your new refrigerator. To help promote
better health, the water filter removes unwanted
particles from your water. However, it does not
sterilize or destroy microorganisms. You may need
to purchase a water purifying system to do that.
In order for the ice maker to operate properly, a
water pressure of 20~125 psi (138~862 kPa) is
required. Under normal conditions, a 0.17 L cup
can be filled in about 10 seconds.
If the refrigerator is installed in an area with low
water pressure (below 20 psi), you can install a
booster pump to compensate for the low pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator is
properly filled. To do this, press the water dispenser
lever until the water runs from the water outlet.
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and 6 mm compression nut.
3
Connecting to the water supply line
1. First, shut off the main water
supply.
3. Find the best level to align the door slope.
• After adjustment, tighten the controller screw
( 3 ) and then the philips screws.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
Cold water line
Pipe clamp
Shut off valve
Example) The slope is about 2 mm as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
Slope
3. Connect the water line installation kit to the shut
off valve.
Cold water line
Reference plane
Water line installation kit
Pipe clamp
Shut off valve
16_ setting up
DA68-02520B-03.indb 16
13. 4. 25. �� 2:27
Connecting the water supply line to the
refrigerator.
There are several items that you need to purchase
to complete this connection.
You may find these items sold as a kit at your local
hardware store.
Use Copper Tubing
Use Plastic Tubing
• 6 mm plastic tubing
→ Molded end (Bulb)
• 6 mm compression
nut (1 pc)
Refrigerator
Plastic Tubing
(Assembled)
Compression
Nut (6 mm)
(Assembled)
Compression Fitting
(Assembled)
Molded end (Bulb)
Ferrule
(Not supplied)
Compression nut ( B )
(6 mm) (Not supplied)
01setting up
• 6 mm copper tubing
• 6 mm compression
nut (1 pc)
• Ferrule (2 pc)
3. Turn water on and check for any leakage.
If you find water drops or leakage in the
connection areas, turn off the main water
supply. Check the connections and, if
necessary, tighten.
4. Flush 4 L of water through the filter before
drinking or using the water from the refrigerator.
(Flush approximately 6 minutes.)
To flush, press a large glass or cup against the
water dispenser lever.
Fill the glass, empty it into the kitchen sink after
it is filled, and then repeat.
5. After you turn on the refrigerator, let the ice
maker make ice for 1 to 2 days. Over that
period of time, throw out the first 1 or 2 buckets
of ice the freezer makes to ensure all impurities
have been removed from the water line.
Only connect the water line to a drinkable
water source. If you have to repair or
disassemble the water line, cut off 6 mm
of the plastic tubing to make sure you get
a snug, leak-free connection.
COMPLETING THE SET UP
Now that you have your new refrigerator installed
in place, you are ready to set up and enjoy the
features and functions of the appliance.
By completing the following steps, your refrigerator
should be fully operational.
Copper tubing or Plastic tubing ( B )
(Not supplied)
(Not supplied)
Household water supply line
1. Connect the household water line to the
assembled compression fitting fitting.
-- If you are using copper tubing, slip the
compression nut ( B ) (not supplied) and
ferrule (not supplied) on the copper tubing (not
supplied) as shown.
-- If you are using plastic tubing ( B ) , insert the
molded end (Bulb) of the plastic tubing ( B ) into
the compression fitting.
CAUTION
Do not use without the molded end (Bulb)
of the plastic tubing ( B ).
2. Tighten the compression nut ( B ) onto the
compression fitting.
Do not over-tighten the compression nut ( B ) .
1. Make sure your refrigerator is in an appropriate
location with reasonable clearance between it
and the wall.
Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure
the interior light comes on when you open the
doors.
3. Set the Temperature control to the coldest
temperature and wait for an hour.
The freezer will get slightly chilled and the motor
will run smoothly. Reset the refrigerator and
freezer to the temperatures you want.
4. After you plug the refrigerator in, it will take a
few hours to reach the appropriate temperature.
You can store food and drinks in the refrigerator
after the temperature is sufficiently cool.
If condensation or water drops appears on
both sides of fridge door’s central part, turn
the Energy Saver mode off after removing
the condensation. (See the explanation on
Energy Saver button in the USING THE
CONTROL PANEL.)
setting up _17
DA68-02520B-03.indb 17
13. 4. 25. �� 2:27
Operating your French Door
Refrigerator
DISPLAY PANEL RESTRICTIONS AND ALERTS
1. English is a default language for the Display. Languages not supported are not displayed on the
screen.
2. Periodic updates of Weather or News will cause network traffic even when you are not using the
Display.
3. When software updates become available, Samsung automatically updates the refrigerator software
and then issues an alert which appears on your Display.
4. Please note that the relevant licensor (contents provider) retains sole discretion as to what content is
made available through the various refrigerator applications.
Furthermore, each licensor retains the sole right to remove any such content that the licensor may
cease to offer through the refrigerator application. In such case, the licensor may send a written notice
to the user with regards to the removal of content.
DIGITAL PANEL
CPU
NEXELL CPU
OS
Linux 2.6.28
RAM
256 MB
LCD
20 cm TFT-LCD (800 * 480)
ROM
512 MB
NETWORKS
IEEE802.11 b / g / n
USING FOR THE FIRST TIME
• When you use the product for the first time after installation, the
Time Zone Setting screen appears on the Display Panel.
You need to select your time zone to use Google Calendar and
the Twitter service correctly.
• After you select the time zone and press the [Save] button, the
Home Screen appears on the Display Panel.
The Time Zone Setting screen may appear again after a software
update.
18_ operating
DA68-02520B-03.indb 18
13. 4. 25. �� 2:27
HOME SCREEN
02operating
• The Home screen is the starting point for all functions. In the center
of the Home screen, basic refrigerator information such as Time,
Date, Weather, Temperature, and Dispenser Selection appears.
The indicator icons at the top left of the screen display information
about the refrigerator’s status. The Menu icons on the bottom of
the screen start various applications or functions. When you select
the (
) on any menu, the screen returns to the Home screen
immediately.
Indicator Icons (At the left-top of the Screen)
1
1.
2.
3.
4.
5.
6.
7.
8.
9.
2
3
4
5
6
7
8
9
Network Signal Strength : 5 Level (off - 1 - 2 - 3 - 4)
Volume Level : 5 Level (off - 1 - 2 - 3 - 4)
Filter Status : 3 Level (blue - pink - red)
Schedule Alarm
S/W Update Notice
Energy Saver
Door Alarm
Ice Off
Dispenser Lock
Date/Time, Freezer/Fridge temperature, Dispenser selection, Current weather
(At the center of the Screen), News (At the bottom of the Screen)
②
④
③
③
②
①
①
⑤
<Wireless network connected>
<Wireless network disconnected>
1. Date/Time : Indicates the current date and time.
2. Freezer/Fridge temperature : Displays the current freezer/fridge temperature. When you select the
freezer/fridge temperature, the temperature setting screen appears.
3. Dispenser : Displays the current status of the dispenser. When you select the current status of the
dispenser, the ice type selection screen appears.
4. Weather: Displays the current local weather, if the refrigerator is connected to a WIFI.
The Home Screen displays the current weather (and time of day), using one of eight images (Clear,
Cloudy, Snow, Rain) X (Day or Night).
5. News: Displays via the Internet, as long as the unit is connected to WIFI.
News titles change at certain intervals. When you select a title, the article will appear on the screen.
operating _19
DA68-02520B-03.indb 19
13. 4. 25. �� 2:27
SETTING THE FREEZER/FRIDGE TEMPERATURE
The temperature control allows you to set the freezer and the fridge temperatures.
Use the following instructions to change and set these temperatures.
1. Select the Freezer/Fridge temperature on the Home screen.
• When you store ice cream at a temperature above 4 °F (-16 °C) in the freezer,
it may melt.
2. Choose a freezer and/or fridge temperature using the temperature buttons, and then select the [Save]
button.
• Freezer : Fahrenheit : -8 °F ~ 8 °F (Default : -2 °F), Celsius : -22 °C ~ -14 °C (Default : -19 °C)
• Fridge : Fahrenheit : 34 °F ~ 46 °F (Default : 38 °F), Celsius : 1 °C ~ 7 °C (Default : 3 °C)
• Function Icons on the upper right of the Display function screen:
: Press to set the dispenser type. (Cubed/Crushed)
: Press to go to the Home screen.
: Press to display the preview screen.
20_ operating
DA68-02520B-03.indb 20
13. 4. 25. �� 2:27
02operating
• The freezer or fridge temperature may change
depending on how often you open and close the
door, the food quantity, the ambient temperature,
etc.
• Temperatures vary in each food storage section in
the freezer and fridge compartments.
• If the room temperature becomes unusually warm,
it can cause temperatures in the Fridge and Freezer
to rise abnormally. If this occurs, the screen will
display the “Abnormally High Temperature” popup. When the temperatures return to normal, the pop-up will close automatically. If the room
temperature returns to normal and the pop-up does not close automatically within a few hours,
please contact your nearest repair center.
SETTING THE POWER FREEZE/POWER COOL
You can use the Power Freeze and Power Cool functions to lower the temperature of the freezer and
fridge compartments quickly. To use the Power Freeze or Power Cool function, follow these steps:
1. Touch the Freezer/Fridge temperature on the Home
screen.
2. Select the Power Freezer ( ) and/or Power Cool (
button(s), and then Press the [Save] button.
)
• To cancel the Power Freeze and the Power Cool, select a Temperature Setting button.
• Energy consumption increases during Power Freeze and/or Power Cool usage.
• If you select the question icon ( ), the function description screen pops up.
Press the [OK] button on the popup screen to re-display the Temperature Display Screen.
• When you turn on Power Freeze/Power Cool, the refrigerator’s compressor speeds up and is
louder than during normal operation.
operating _21
DA68-02520B-03.indb 21
13. 4. 25. �� 2:27
SETTING THE DISPENSER
To select the ice type, follow these steps:
1. Touch Dispenser Status on the Home screen. The Dispenser pop-up appears.
2. Touch the desired dispenser type, and then press the [Close] button.
DOOR OPEN ALARM
If the fridge / freezer door remains open more than 3
minutes, a warning window pops up accompanied by
alarm sounds. The alarm repeats every minute and
only stops when you close both doors. If you set Door
Alarm to OFF in the Settings menu, the alarm does not
operate.
22_ operating
DA68-02520B-03.indb 22
13. 4. 25. �� 2:27
MEMO
You can use the Memo function to leave a memo for yourself or someone else.
How to leave a new memo.
1. Select the [Memo] button on the Home screen.
02operating
2. Select the [New] button.
3. Select the memo tools you want by touching the tool
buttons above the memo entry area.
The tools are described below.
•
•
•
•
•
: Select to input a memo in pen mode.
Use your finger or a smooth-tipped stylus.
: Select to input a memo in keyboard
mode.
: Select to erase a memo.
: Select pen or erase thickness.
: Select pen color.
• You can save up to 80 memos.
• To use the Keyboard, press the Keyboard icon, and then
touch where you want the memo to begin. The keyboard
pops up on the Display. The number of characters you can
input with the Keyboard is limited to the number of characters
that will fit in the memo entry area.
operating _23
DA68-02520B-03.indb 23
13. 4. 25. �� 2:27
4. Press the [Save] button after you have completed
your memo.
• If you want to display the memo on the Home
screen, select the [Attach to Home Screen]
button, and then select the [Save] button.
See below.
• You can “put away” the memo being displayed on the Home screen by pressing the [Detach
from Home Screen] button or hide it temporarily by pressing the [Hide] button.
How to display memos.
1.
Select the [Memo] button on the Home screen.
To view multiple memos, continue
here.
24_ operating
DA68-02520B-03.indb 24
13. 4. 25. �� 2:27
2.
Select the memo you want to display.
2.
Multi-Select mode lets you select a
number of memos and then view them
one after another by pressing the
or
buttons.
02operating
• When you select the [Select All] button, the
Multi Selection screen shows.
• When there are multiple pages with many
memos, there will be page number on the
bottom of the screen. If you select a page
number, the screen shifts to that page.
To view multiple memos, press the [Multi
Select] button.
• The memo(s) being displayed on the Home screen is indicated with the red tack.
• The written memos appear as thumbnails.
You can change the order of the written memos by dragging and dropping.
3.
View the saved memo.
• In the Detail View screen, you can delete the
memo or attach it to or detach it from the
Home screen.
3.
Select the memos you want to view.
• When you select the [Select All] button, all the
memos on the current page will be selected
and the [Select All] button will shift to the
[Unselect All] button.
• To exit the Multi Select screen, press the
[Cancel] button.
• When there are multiple pages with many
memos, there will be page numbers on the
bottom of the screen. If you press a page
number, the screen shifts to that page.
operating _25
DA68-02520B-03.indb 25
13. 4. 25. �� 2:27
4.
Select the [View Selected] button.
5.
Check the saved memo by using the
and
buttons.
Each time you select the
or
button,
the next menu in sequence appears.
• In the Detail View screen, you can delete a
memo or attach it to or detach it from the
Home screen.
26_ operating
DA68-02520B-03.indb 26
13. 4. 25. �� 2:27
How to delete memos.
1.
Select the [Memo] button on the Home screen.
2.
Select the memo you want to delete.
2.
To delete multiple memos, select the [Multi
Select] button.
3.
Press the [Delete] button.
3.
Select the memos you want to delete.
02operating
To delete multiple memos, continue
here.
operating _27
DA68-02520B-03.indb 27
13. 4. 25. �� 2:27
4.
Press the [Yes] button.
4.
Press the [Delete] button.
5.
Press the [Yes] button.
PHOTOS
You can upload photos from a Memory card / AllShare (DLNA device) / Picasa Web Album into My Album
on your refrigerator.
How to copy photos from a Memory Card to My Album
1.
2.
Pull out the cover over the card slot and move it to the side.
Insert the memory card (SD/SDHC/MMC/HS MMC) with saved images into the card slot in the right
direction. The “A SD/MMC card is connected” message appears on the screen.
28_ operating
DA68-02520B-03.indb 28
13. 4. 25. �� 2:27
•
•
•
•
•
•
•
•
3.
Select the [Photos] button on the Home screen.
4.
Select [Memory Card] on the Photos list.
02operating
•
The Memory slot is only for SD/SDHC/MMC/HS MMC type memory cards.
The slot can read only JPEG(JPG) images.
The Panel has a capacity of about 300 photos.
When saving photos from a memory card to the panel, the refrigerator automatically changes
the photo size to 800 x 480 pixels, regardless of the original size.
If there are many photos saved on the Memory card, it will take awhile for the preview function
to load.
If the Memory Card is removed while transferring images, My Album only shows the images that
have transferred completely. If no images have completely transferred, the Display returns to the
Photos screen.
The saved images are fit to the screen size. Depending on the size of an image, there may be
black bars on the top or sides.
A Memory Card is not supplied with the refrigerator.
The refrigerator may not be able to read your SD/SDHC/MMC/HS MMC memory card,
depending on the type of card it is.
operating _29
DA68-02520B-03.indb 29
13. 4. 25. �� 2:27
5.
Select the photo you want to save to My
Album.
5.
To store multiple photos, press the [Multi
Select] button.
• When you select the [Select All] button, the
Multi Selection screen appears.
• When there are multiple pages with many
photos, there will be page numbers on the
bottom of the screen. If you select the page
number, the screen shifts to that page.
• This function also applies to the <All Share>
and <Picasa Web Album> functions.
• When there are folders in the Memory Card, the folder icons will appear on the screen.
• When you select a folder, you will see the photos stored in it.
• When you are in a sub-folder, you can move up to the folder that contains sub-folder by selecting
the “..” icon on the sub-folder.
6.
Press the [Save To My Album] button.
6.
Select all the photos you want to save to
My Album.
30_ operating
DA68-02520B-03.indb 30
13. 4. 25. �� 2:27
• When you select the [Select All] button, all the
photos on the current page are selected and the
[Select All] button shifts to the [Unselect All] button.
• When you press the [View Selected] button,
you will see its larger version.
• To exit the Multi Select screen, press the
[Cancel] button.
• To delete the check mark on a selected photo,
touch the photo again.
• When there are multiple pages with many photos,
there will be page numbers on the bottom of the
screen.
• If you have photos selected and move to another
folder, the selected photos will be automatically
unselected.
• When you touch the folder name above the thumbnails (Preview Photos), the screen displays that
folder.
• This function also applies to the <All Share> and
<Picasa Web Album> functions.
7.
7.
Press the [Save To My Album] button.
8.
While the photos upload from the Memory
Card, the “Save To My Album” popup
appears on the screen.
While the photo uploads from the Memory
Card, the “Save To My Album” popup
appears on the screen.
02operating
• When you select a photo, its detail information
will appear.
• Larger photo sizes will take longer to upload.
• Larger photo sizes will take longer to upload.
9.
When the upload is complete, take the Memory Card out of the slot.
operating _31
DA68-02520B-03.indb 31
13. 4. 25. �� 2:27
How to upload DLNA device photos to My Album (All Share)
• This function is only available when the refrigerator is connected to your wireless
network (Wi-Fi).
1.
Select the [Photos] button on the Home screen.
2.
Select [All Share] on the Photos list, and then connect
the DLNA device to the same wireless AP as the
refrigerator.
3.
In the All Share list, select the DLNA device you want to
connect.
• If the DLNA device you want to connect does not
appear, press the [Refresh] button several times to
detect it.
• The device you want to connect must have the related function installed with the DLNA (Digital
Living Network Alliance) certificate.
• The display supports up to 4096 x 4096 (16 mega) resolutions. When the number of pixels at
either vertical or horizontal axis of a photo is more than 4,096 or its resolution is changed, the
display may not support it.
4.
Select the desired folder.
32_ operating
DA68-02520B-03.indb 32
13. 4. 25. �� 2:27
• When you are in a sub-folder, you can move up to the folder that contains sub-folder by selecting the “..”
icon on the sub-folder.
Select the photo you want to save to My
Album.
5.
To store multiple photos, select the [Multi
Select] button.
6.
Press the [Save To My Album] button.
6.
Select the photos you want to save to My
Album.
7.
While the photo uploads from the DLNA
device, the “Save To My Album” popup
appears on the screen.
7.
Press the [Save To My Album] button.
8.
While the photos upload from the DLNA
device, the “Save To My Album” popup
appears on the screen.
02operating
5.
operating _33
DA68-02520B-03.indb 33
13. 4. 25. �� 2:27
• Larger photo sizes will take longer to upload.
• The wireless network is used to transmit photos from the DLNA device. The transmission may
not always work properly depending on the network conditions.
• When you select a photo, its detail information will appear.
How to copy photos from Picasa Web Album to My Album.
[Public Photos]
You can download and store public photos from Google Picasa Web Album.
• This function is only available when the refrigerator is connected to your wireless
network (Wi-Fi).
1.
Select the [Photos] button on the Home screen.
2.
Select [Picasa Web Album] in the Photos list.
3.
Select the photo you want to save to My
Album.
3.
To store multiple photos, select the [Multi
Select] button.
34_ operating
DA68-02520B-03.indb 34
13. 4. 25. �� 2:27
Press the [Save To My Album] button.
4.
Select the photos you want to save to My
Album.
5.
While the photo downloads from Picasa
Web Album, the “Save To My Album” popup
appears on the screen.
5.
Press the [Save To My Album] button.
6.
While the photos download from Picasa
Web Album, the “Save To My Album” popup
appears on the screen.
02operating
4.
• When you select a photo, its detail information will appear.
• Larger photo sizes will take longer to upload.
• Depending on the status of the wireless network, the download may not always work.
[Personal Photos]
You can download and store personal photos from Google Picasa Web Album.
• This function is available only when the refrigerator is connected to your wireless network (Wi-Fi).
• To use this function, you must have a Google account.
1.
Select the [Photos] button on the Home screen.
operating _35
DA68-02520B-03.indb 35
13. 4. 25. �� 2:27
2.
Select [Picasa Web Album] in the Photos list.
3.
Press the [Sign In] button.
• When you have an account with Google Picasa
(http://picasaweb.google.com), you can see the
photos you uploaded to Picasa by logging into your
account.
4.
Select the Email input box, and then enter your Google account ID using the on-screen keyboard.
Select Password input box, and then enter your Google password using the on screen keyboard.
5.
Press the [Sign In] button.
• If you check the ‘Stay signed in’ box, the refrigerator will store the account for faster future log-ins.
6.
Select a web album which has photos you want to store
in My Album.
• If you press the [Sign Out] button, the Display
returns to the Picasa public photos screen.
• If you choose the Explore tab in the right upper
corner, the screen displays the public photos
screen.
36_ operating
DA68-02520B-03.indb 36
13. 4. 25. �� 2:27
Select the photo you want to save to My
Album.
7.
To store multiple photos, select the [Multi
Select] button.
8.
Press the [Save To My Album] button.
8.
Select the photos you want to save to My
Album.
9.
While the photo downloads from Picasa
Web Album, the “Save To My Album” popup
appears on the screen.
9.
Press the [Save To My Album] button.
02operating
7.
10. While the photo downloads from Picasa
Web Album, the “Save To My Album” popup
appears on the screen.
• When you select a photo, its detail information will appear.
• Larger photo sizes will take longer to upload.
operating _37
DA68-02520B-03.indb 37
13. 4. 25. �� 2:27
How to run a the slide show.
1.
Select the [Photos] button on the Home screen.
2.
Select [My Album] in the Photos list.
3.
Select the [Multi Select] button.
4.
Select the photos you want for the slide show, and then
press the [View Selected] button.
(Select more than two photos.)
• When you select a photo, its detail information will
appear.
5.
Select the [Slide Show] button.
• Depending on a photo’s size (Width x Height), the
screen may display blank bars on the top or sides
of the image.
38_ operating
DA68-02520B-03.indb 38
13. 4. 25. �� 2:27
6.
The slide show starts. Select the screen to change the view option.
02operating
• The slide show runs once. When it finishes, the view options appear on the screen.
• By selecting the
or
button, you can move to the previous or next photo.
• Select the
button to run the slide show again.
7.
To change the screen transition effect of the slide show,
select the
button.
8.
Select the desired slide show transition effects, and then
press the [OK] button.
• You can preview the selected effect on the left side
of the screen.
• The Random effect runs the photos in a random
order.
9.
To change the screen transition time, select the
button.
operating _39
DA68-02520B-03.indb 39
13. 4. 25. �� 2:27
10. Use the
and
buttons to change the slide show
transition time, and then press the [OK] button.
11. To change the order of the photos in the slide show,
select the
button.
12. Select [Normal] or [Shuffle], and then press the [OK]
button.
40_ operating
DA68-02520B-03.indb 40
13. 4. 25. �� 2:27
How to rotate photos.
1.
Select [My Album] in the Photos list.
Select the photo you want to rotate.
2.
Select the [Multi Select] button to rotate
multiple photos.
3.
Select the [-90° Rotate] or [90° Rotate]
button.
3.
Select the photos you want to rotate, and
then press the [View Selected] button.
4.
After selecting the photos you want to
rotate, select the [-90° Rotate] or [90°
Rotate] button.
02operating
2.
• The system automatically stores the rotated photos, replacing the original photos.
operating _41
DA68-02520B-03.indb 41
13. 4. 25. �� 2:27
Saving photos to a memory card.
1.
Insert a memory card into the refrigerator’s memory card
slot.
2.
Select [My Album] in the Photos list.
3.
Select the photo you want to save.
3.
To save multiple photos, select the [Multi
Select] button.
4.
Press the [Save To Memory Card] button.
4.
Select the photos you want to save, and
then press the [Save To Memory Card]
button.
5.
While the photos are being save, “Save To Memory Card” appears on the screen.
• You must insert a memory card into the memory card slot to use this function.
42_ operating
DA68-02520B-03.indb 42
13. 4. 25. �� 2:27
How to delete photos.
1.
Select [My Album] in the Photos list.
Select the photo you want to delete.
2.
To delete multiple photos, press the [Multi
Select] button.
3.
Press the [Delete] button.
3.
Select the photos you want to delete, and
then press the [Delete] button.
4.
Press the [Yes] button.
4.
Press the [Yes] button.
02operating
2.
• There are 10 photos that have been pre-loaded by Samsung.
These photos explain product features and cannot be deleted.
operating _43
DA68-02520B-03.indb 43
13. 4. 25. �� 2:27
GROCERY MANAGER
You can save the purchase date and expiration date of your food before storing it in the fridge and then
easily check how long food has been stored at a later time.
Additionally, you can easily see what food items are stored and where they are located in the refrigerator.
How to add food
1.
Select the [Grocery Manager] button on the Home
screen.
2.
Select the [Add Food] button at the bottom right.
[No food is stored]
3.
[Food is stored]
Select and hold one of the food images displayed on
the right. Then, drag & drop it into the location on the
refrigerator image where it will be stored. Be sure to
keep your finger on the food image until it is in place.
• The storage area for the refrigerator is divided into 4
sections. The added food is displayed as an icon in
the refrigerator image.
• To change the location of a stored item, press and
hold the food image, and then drag & drop it to
another location within the refrigerator image.
• If you select a food icon added to the refrigerator
and drag & drop it outside of the refrigerator, the
food item is deleted.
• The refrigerator section and the quantity of added
food items are displayed at the bottom of the
refrigerator image.
• You can store up to 15 kinds of food and ‘freshness’
durations. See examples below: All food : 3 days.
44_ operating
DA68-02520B-03.indb 44
13. 4. 25. �� 2:27
4.
The ‘Purchase Date’ and ‘Expiration Date’ are displayed
at the bottom of the screen.
The Purchase Date is automatically set to today, the
Expiration Date is automatically set to the last day of the
freshness duration.
To change the Purchase Date, touch the appropriate
section on the screen, and then enter the new date.
02operating
• You can also select a date by using the [+] and [-] buttons.
However, the Purchase Date must always be earlier than the Expiration Date.
5.
Select the date, and then press [Save] button.
• To select additional food items, repeat steps 2 to 5.
6.
Press the [OK] button after you have completed the date settings.
Press the [Save] button to save your settings.
• You can save up to 50 grocery items.
operating _45
DA68-02520B-03.indb 45
13. 4. 25. �� 2:27
How to use the Grocery Manager
1.
Select the [Grocery Manager] button on the Home screen.
All food items are displayed as icons in their stored locations within the refrigerator image on the left.
They are also listed on the right side of the screen.
2.
Select a storage section in the refrigerator image to display the food stored in that section on the
right side of screen. Select the storage section again (deselect it) to list all the food items stored in
the refrigerator on the right side of the screen.
3.
Select one of the stored food icons on the right side
of the screen to identify where it is located in the
refrigerator. The purchase and expiration dates of the
item will also be displayed.
• An expiration date can be set up to 999 days.
• You cannot modify the purchase date and expiration
date of the food in the Grocery Manager screen.
46_ operating
DA68-02520B-03.indb 46
13. 4. 25. �� 2:27
How to delete food
Select the [Grocery Manager] button on the Home
screen.
2.
Select the food, and then select the [Delete] button.
02operating
1.
• To select all the stored food items, select the [Delete
all] button.
3.
Select the [Yes] button to complete.
How to set a Reminder
1.
Select the [Grocery Manager] button on the Home screen, and then select the [Set Reminder]
button.
2.
Select the Reminder options you want, and then select
the [OK] button.
• A reminder is set based on the Expiration Date of
the stored food. A reminder window appears when
the scheduled duration has passed.
• If more than one item is set to the same Reminder
value (except [None]), the reminder window appears
at 6:00 AM, 11:00 AM and 5:00 PM.
operating _47
DA68-02520B-03.indb 47
13. 4. 25. �� 2:27
EPICURIOUS
With the Epicurious service, you can easily to find various recipes by ingredient, season, occasion, or
category.
• This function is only available when the refrigerator is connected to your wireless
network (Wi-Fi).
How to use the Featured Recipes function
1.
Select the [Epicurious] button on the Home screen.
• There will be a 4-second commercial ad when you
start Epicurious.
2.
Select [Featured Recipes] on the epicurious list.
3.
Select a Featured Recipes category.
The screen displays a list of recipes.
4.
Select a recipe. The screen displays the recipe
ingredients and other details.
• The popularity of a recipe is indicated by the
number of forks. Four forks is the highest.
•
: Select to show recipes in the last used
• order.
•
: Select to show in order of photo
• information.
•
: Select to show recipes in order of
• popularity.
•
: Select to show recipes in alphabetical order.
48_ operating
DA68-02520B-03.indb 48
13. 4. 25. �� 2:27
Press the [Favorite] button to add a recipe to your favorite list.
Press the [Shopping List] button to make a shopping list for a recipe.
6.
Select the [Preparation] tab on the top of the page to view the recipe’s step by step preparation
instructions.
7.
Select the [Review] tab on the top of the page to see reviews of the recipe by other users.
8.
Select the [About] tab on the top of the page to view information about the author of the recipe.
02operating
5.
operating _49
DA68-02520B-03.indb 49
13. 4. 25. �� 2:27
How to use Recipe Search by Ingredient.
1.
Select [Recipe Search by Ingredient] on the Epicurious
list.
2.
Select the [Food] or [Drink] button, and then select the
[Food]/[Drink] type on the left of screen.
Next, select an ingredient icon on the right.
• When you select an ingredient icon, the number of
recipes using that ingredient appears on the bottom
of the page.
• You can select multiple ingredient icons.
3.
Select the [View Recipe Results] button.
4.
Select the recipe you want. The screen displays the ingredients and other detail information.
5.
Select the [Favorite] button to add the recipe to your Favorites list.
Select the [Shopping] List button to view a shopping list for the recipe.
50_ operating
DA68-02520B-03.indb 50
13. 4. 25. �� 2:27
How to use My Favorites.
Select [My Favorites] on the Epicurious list.
• You can store up to 100 favorite recipes.
2.
Select the recipe you want.
02operating
1.
• Select the A-Z button on the right to arrange the favorites in the alphabetical order.
• Select a recipe, and then select the [Delete] button to delete the recipe from your Favorites List.
How to use My Shopping List.
1.
Select [My Shopping List] on the Epicurious list.
• Displays the ingredients for recipes you select so
you can create shopping lists.
• You can store up to 100 shopping lists.
2.
Select the recipe or recipes you want.
operating _51
DA68-02520B-03.indb 51
13. 4. 25. �� 2:27
3.
Select the [View Combined Shopping List]
button.
3.
Select the [View Shopping List] button.
4.
The screen displays the combined ingredient
list for all the recipes you selected.
4.
Select a recipe on the left of screen.
The screen displays the ingredient list for
the recipe you selected.
CALENDAR
Displays the calendar from Google Calendar.
• This function is only available when the refrigerator is connected to your wireless network (Wi-Fi).
• To use the Calendar function, you need a Google account.
• The Calendar schedule supports dates from Jan 1970 to Dec 2037.
How to view the Google Calendar.
1.
Select the [Calendar] button on the Home screen.
52_ operating
DA68-02520B-03.indb 52
13. 4. 25. �� 2:27
Select the Email input box, and then enter your Google account ID using the on-screen keyboard.
Select the Password input box, and then enter your password using the on-screen keyboard.
3.
Press the [Sign in] button.
• If you check the ‘Stay signed in’ box, the refrigerator
will store the account for faster future log-ins.
02operating
2.
• If you do not have a Google account, you can get
one at http://calendar.google.com.
• In the Email section, enter your Google account ID
in this format: UserID@gmail.com.
4.
To view your schedule, select a date. The screen
displays the daily schedule for the date you selected.
• You cannot modify or erase the Google Calendar
schedule through the refrigerator Display screen.
• The display color of each scheduled event is the
same as that in the Google Calendar application.
• Press the left / right direction arrows to check the
Monthly Schedule.
• When there are more than 4 events within a day, the calendar indicates the excess with “+1
more”.
• The schedule updates every 30 minutes.
5.
Press the event you want to view. The event you selected appears on the screen.
operating _53
DA68-02520B-03.indb 53
13. 4. 25. �� 2:27
How to manage Shared Calendar
1.
Select [Other Calendar].
2.
Select a [Show] or [Hide] button.
• You can show or hide schedules from your Google
Web Calendar subscription list using the Other
Calendar List screen.
• If you change the Show / Hide setting here, it does
not change in the subscription list and the Show /
Hide setting on the Google Web Calendar.
3.
Select the [Apply] button.
The Google Calendar re-appears with the displayed
schedule changed according to your selections.
How to create an event
1.
Select the [Create event] button on the Calendar screen.
• You must be logged in on your primary Gmail email
address (***@gmail.com) to use the Create an event
feature.
• To view the primary email address:
1. Log in to www.google.com.
2. Access Gmail.
3. Click the e-mail address on the upper right side
of the screen ( ***@gmail.com).
A drop down window appears.
4. Click Account.
5. Look under [Email addresses and usernames] for the email address identified as the Primary
email.
54_ operating
DA68-02520B-03.indb 54
13. 4. 25. �� 2:27
Enter the Event Title, Date and Time, Location (Where), and Description in the corresponding entry
fields using the screen keyboard.
3.
To set a reminder for a scheduled event, select the Reminders input box, and then select one of the
Reminder options.
4.
When all settings are complete, select [Save].
02operating
2.
WEATHERBUG
The internet weather service provides current and weekly weather information by region.
• This function is only available when the refrigerator is connected to your wireless
network (Wi-Fi).
How to add your Region to Weatherbug
1.
Select the [WeatherBug] button on the Home screen.
• There will be a 4-second commercial ad when you
start the WeatherBug.
operating _55
DA68-02520B-03.indb 55
13. 4. 25. �� 2:27
2.
Select the region search bar on the top left of the screen.
3.
Select the [+] button in the upper right corner of screen.
4.
Enter your location or zipcode (US Only) using the
onscreen keyboard, and then press the [OK] button.
5.
Select your location.
6.
Select a local weather station.
56_ operating
DA68-02520B-03.indb 56
13. 4. 25. �� 2:27
7.
Select the “
8.
The display screen shows your local weather.
” button on the top right of the screen.
02operating
How to view today’s weather.
1.
Select the [WeatherBug] button on the Home screen.
• There will be a 4-second commercial ad when you
start the WeatherBug.
2.
The Weatherbug screen at right appears displaying your
local weather.
• If you select Active Alerts, the screen displays
weather alerts.
3.
Select [So Far Today]. The screen displays the current
weather detail information.
operating _57
DA68-02520B-03.indb 57
13. 4. 25. �� 2:27
How to add other Regions to Weatherbug
1.
Select the region search bar on the top left of the screen.
2.
The current region information appears on the screen.
3.
Select the [+] button in the upper right corner of the
screen.
4.
Enter the location name or zipcode (US Only) using the
on-screen keyboard, and then press the [OK] button.
58_ operating
DA68-02520B-03.indb 58
13. 4. 25. �� 2:27
Select the desired location.
6.
Select the desired local weather station.
7.
Press the “
8.
The screen displays the weather for the location you selected.
02operating
5.
” button on the top right of the screen.
How to view Weather Information for a Region
1.
Select the desired location on the location list.
2.
Press the back (
) button in the upper right corner.
The screen displays the weather for the location you selected.
operating _59
DA68-02520B-03.indb 59
13. 4. 25. �� 2:27
How to delete Regions from Weatherbug
1.
Select the [edit] button in the upper right corner of
screen.
2.
Select the check box on the left of the location you want
to delete, and then then select the Delete button.
How to view weather forecasts.
1.
Select the [Forecast] button or Tonight’s Forecast.
2.
Select the desired forecast on the forecast list. The screen displays detailed forecast information.
• The forecast screen lists weather forecasts for 7 days.
• It shows the day, the Day / Night (US weather only), the weather condition icon, the temperature
and the weather description.
• If you select the [Conditions] button on the lower right, the screen displays the current weather
information.
60_ operating
DA68-02520B-03.indb 60
13. 4. 25. �� 2:27
AP NEWS
The internet news service provides current news in up to 11 categories.
• This function is only available when the refrigerator is connected to your wireless
network (Wi-Fi).
1.
Select the [Ap News] button on the Home screen.
2.
Select a news category.
• When you select a category on the left, the screen
displays the major news for that category.
3.
Select the desired article.
02operating
How to view news from AP News.
• The news article on the preview page shows the first 2 lines of the entire article.
• To view the article in detail, visit http://www.ap.org on your mobile phone or PC.
operating _61
DA68-02520B-03.indb 61
13. 4. 25. �� 2:27
4.
To see all the photos related to the article, select the main photo in the detail news article.
• Select the
5.
and
buttons on the top right of the article to view other articles.
Select a photo to enlarge it.
• Press the
and
buttons to see other photos in enlarged view.
62_ operating
DA68-02520B-03.indb 62
13. 4. 25. �� 2:27
TWITTER
• This function is only available when the refrigerator is connected to your wireless network (Wi-Fi).
• You can’t write a tweet while using this function.
How to show the twitter.
Select the [Twitter] button on the Home screen.
2.
Select the Email input box. Enter your twitter account ID using the on-screen keyboard.
Select the Password input box. Enter your twitter password using the on-screen keyboard.
3.
Press the [Sign in] button.
• If you do not have a twitter account, you can create
one at http://twitter.com.
• In the Email section, enter your Twitter account ID,
for example, UserID@gmail.com.
• If you select the ‘Stay signed in’ check box, you
do not need to log in each time to enter the Twitter
menu.
• If the system time is not set exactly, login may fail.
If login fails, set the current time correctly at Settings
→ Time/Date, and then retry.
4.
The Tweet list screen appears. This page displays your
following twitters up-to-date information including their
photos, comment previews and listed dates.
02operating
1.
operating _63
DA68-02520B-03.indb 63
13. 4. 25. �� 2:27
5.
Press a tweet on the tweet list and you can see the
detail information.
• When selecting the List View on the Detail View
screen, the screen changes to the Twit List.
6.
Select the i button on the right of the screen to see detail
information about the follower/followee.
SCREENSAVER THEME
Select the themes for the Display screen screensaver.
1.
2.
Select the [Settings] button.
Select the [Screensaver Theme] on the Settings list.
3.
Select the theme(s) you want to use in the screensaver,
and then press the [Save] button.
• The themes you select may not display if the data
underlying them is not ready or unavailable
64_ operating
DA68-02520B-03.indb 64
13. 4. 25. �� 2:27
ENERGY SAVER
02operating
Turns the Energy Saver function on and off. When the Energy
Saver is on, the power consumption decreases.
1. Select the Energy Saver ON or OFF buttons on the
Settings list.
• The Energy Saver function is pre-set to ON in the
factory.
• If condensation or water drops appear on the doors,
turn the Energy Saver mode off.
DOOR ALARM
Turns the Door Alarm on and off.
1. Select the Door Alarm ON or OFF buttons on the
Settings list.
• If the door alarm is set to ON, an alarm beeps if any
door is left open for more than three minutes.
• The beeping stops when you close the door. The
door alarm function is pre-set to ON in the factory.
DISPENSER LOCK
When you activate the Dispenser Lock function, the dispenser
and the flex zone selection button will not work.
1. Select the Dispenser Lock ON or OFF buttons on the
Settings list.
• If you select the Dispenser Lock ON button, the
Lock icon ( ) appears in the upper left corner of
the Home screen.
• If you suddenly can not use the dispenser, check
whether the Dispenser Lock function is on.
ICE MAKING OFF
1.
Select the Ice Making Off ON or OFF button on the
Settings list.
• When the Ice Making Off is set, the Ice Off indicator
icon ( ) appears on the top left of the Home
screen.
• Pressing the [ON] button turns Ice Making Off.
operating _65
DA68-02520B-03.indb 65
13. 4. 25. �� 2:27
•
---•
We recommend you stop ice making if the following occur:
There is enough ice in the ice bucket.
You want to save water and energy.
Water is not being supplied to the Ice maker.
If the ice maker function is ON, and the water line is not connected, there will be a water valve
noise from back of the unit. Touch the Ice making Off ON button in the settings list to turn the
ice maker off.
WATER FILTER
The Water Filter status icon on the Home screen enables you to check the current status of the water
filter. Follow the instructions below to check and/or replace the water filter.
1.
Check the water filter status in the Settings list or indicator icons on the upper left of Home screen.
• Good (Blue) : The filter does not need replacement. It is normal.
• Order (Pink) : The filter needs replacement. Order a new filter.
• Replace (Red) : The filter needs replacement immediately.
2.
If the status reads “Order” or “Replace,” select the Water
Filter on the Settings list to access the replacement
instructions.
3.
Follow instructions in the Water Filter replacement guide to replace the Water Filter.
• Press the [Next] button to move to the next page of the instructions.
4.
When the replacement is done, press and hold ‘Reset the water filter’ at the center of the screen for
3 or more seconds to reset the water filter indicator.
66_ operating
DA68-02520B-03.indb 66
13. 4. 25. �� 2:27
CAUTION
DO NOT use the water or ice dispenser without a water filter cartridge. You can block the water
line or damage the dispenser.
02operating
• Be sure to flush the dispenser thoroughly to prevent the dispenser from dripping.
If water drips from the dispenser, it means that there is still air in the line.
• For a replacement water filter, visit your local home improvement center or Samsung’s official
on-line parts distributor at http://www.samsungparts.com.
Be sure the replacement water filter has the SAMSUNG logo on the box and on the water filter.
LANGUAGE
You can select the default language.
1. Press the
button in the right bottom corner of the Settings list.
2. Select the preferred language on the Settings list.
After selection, the default language will be changed automatically.
• Please be aware that if the contents providers do not support the different language, the
language of contents itself would not be changed after language selection.
DISPLAY
Lets you set the brightness of the LCD and the running time of the Screensaver.
1. Press the
button in the right bottom corner of the Settings list.
2. Select [Display] in the Settings list.
3.
Select the Brightness level and/or Screensaver Running Time
you want, and then press the [Save] button.
• After 60 seconds, the Screen Saver runs for the time you
set, then the LCD panel turns off.
operating _67
DA68-02520B-03.indb 67
13. 4. 25. �� 2:27
VOLUME
Lets you control the volume of the alert sounds.
1.
2.
Press the
button in the right bottom corner of the Settings list.
Select [Volume] in the Settings list.
3.
Select a volume level button to change the alert sound
level.
Press the [Save] button to set the new volume level.
4.
• An alert sounds whenever a button is touched or a
message window or menu list appears.
TIMEZONE
You must select your time zone to use Google Calendar and the Twitter service correctly.
To select your time zone, follow these steps:
1.
2.
Press the
button in the right bottom corner of the Settings list.
The Time Zone Setting screen appears.
Select [Timezone] in the Settings list.
3.
To save the new time zone, press the [Save] button.
• The Time Zone Setting screen may appear again
automatically after a software update.
68_ operating
DA68-02520B-03.indb 68
13. 4. 25. �� 2:27
TIME SETTING
Lets you set the current time.
1. Select the
button in the bottom right corner of the Settings list.
2. Select [Time] in the Settings list.
02operating
3.
Select the
and
buttons to revise the time settings, and
then press the [Save] button.
• If the current time is incorrect, you may not be able to use
twitter.
DATE SETTING
Lets you can set the current date.
1. Press the
button in the right bottom corner of the Settings list.
2. Select [Date] in the Settings list.
3.
4.
Use the
and
buttons to revise the month.
Select the desired day, and then press the [Save] button.
• If the current date is incorrect, you may not be able to use
twitter.
WI-FI
Lets you turn the refrigerator’s connection to your wireless network on and off.
1. Press the
button in the right bottom corner of the Settings list.
2. Select [Wi-Fi] the Settings list.
3. Select ON or OFF.
operating _69
DA68-02520B-03.indb 69
13. 4. 25. �� 2:27
WI-FI NETWORKS
When you set Wi-Fi ON, (see above) the refrigerator’s wireless network function searches for a wireless
AP to connect to.
• In addition to the router installed in your home, your refrigerator can detect other wireless routers
installed in nearby houses or offices while connecting to your wireless network. It is illegal to use
another’s router without permission and can be subject to severe penalties. Consequently, you
should connect the refrigerator only to your own wireless router or to routers for which you have
permission.
CAUTION
1.
2.
Press the
button in the right bottom corner of the Settings list.
Select [Wi-Fi Networks] in the Settings list.
3.
Select the wireless AP you want to connect to.
•
: Locked with Security Code
•
: Signal Strength
• You can check the MAC address of the Fridge on
the bottom of the Screen.
• If there are no APs showing on the screen, press the [Search] menu at the bottom.
• Depending on the wireless AP type, the refrigerator may not make a connection.
We recommended you use a wireless AP that supports IEEE802.11b/g/n.
• If you don’t have a wireless router, please contact your internet provider or purchase and install
one yourself.
• If you can’t remember the name of your wireless network system (SSID) or its security code,
please see the user manual of your router.
• Radio frequency signals can interfere with any the wireless network system and they may affect
the network performance of your refrigerator.
• Obstacles such as concrete walls and metallic doors and radio and microwave interference from
devices such as microwave ovens can affect the operation of your wireless network system.
• Depending on the type and location of your wireless network system and the surrounding
environment, the range and quality of your wireless network may vary.
4.
If your wireless network has a security code enter the
security code, and then press the [OK] button.
In most cases, after you have entered the security
code, the refrigerator acquires the Network addresses
it needs (IP Address, Subnet Mask, Gateway, and DNS)
to connect to the network. If it does not or you need to
enter these values manually, go to Step 6.
70_ operating
DA68-02520B-03.indb 70
13. 4. 25. �� 2:27
After the refrigerator has connected to your network, you can select the [IP Address] button on the
Wi-Fi Networks screen to view the current IP address and Gateway values.
6.
If you need to enter the IP Address, Subnet Mask, Gateway, and DNS manually, press the [User
Config] button on the IP Address screen. Then, select the [IP Address], [Subnet Mask], [Gateway],
and [DNS] buttons in turn and, using the keypad, enter the appropriate values. When you are done
with each entry, select the [OK] button on the keypad.
7.
After entering the values for all four parameters, press
the [Apply] button.
02operating
5.
TEMPERATURE UNIT CONVERTER
Lets you set the temperature display to Fahrenheit or Centigrade. The unit you select applies to the
Freezer / Fridge set temperature and the temperature displayed by the Weather function.
1. Press the
button in the right bottom corner of the Settings list.
2. Select the Temperature Unit Converter °C or °F button in the Settings list.
operating _71
DA68-02520B-03.indb 71
13. 4. 25. �� 2:27
DISPENSER LIGHT
Lets you set the operation of the dispenser lamp light.
1. Press the
button in the right bottom corner of the Settings list.
2. Select [Dispenser Light] in the Settings list.
3.
Select the desired dispenser light status, and then press
the [Save] button.
• On : The Dispenser lamp is always on.
• Auto : The Dispenser lamp lights up when you use
the Dispenser. When you release the Dispenser
lever, the light goes off in 5 seconds.
• Off : The Dispenser lamp does not light up when
you use the Dispenser.
COOLING OFF
The cooling off function shuts off the cooling mechanism in freezer and fridge compartments, but does
not shut off the electrical power to the refrigerator. This function is only used to demo refrigerator models
on showroom floors.
1. Press the
button in the right bottom corner of the Settings list.
2.
3.
4.
Select the Cooling Off ON or OFF button in the settings list.
• If you select the Cooling Off ON button, the Home screen will displays “OFF” on the freezer/
fridge temperatures and the refrigerator comselector functions will be deactivated.
(The refrigerator and freezer do not get cold.)
If you select the [ON] button, the message window below appears.
Press the [Yes] button for more than 3 seconds to confirm.
72_ operating
DA68-02520B-03.indb 72
13. 4. 25. �� 2:27
TOUCH SCREEN CORRECTION
You can calibrate the stylus touch point to best meet your needs.
To adjust the stylus touch point on the touch screen:
Press the
button in the right bottom corner of the Settings list.
Select [Touch Screen Correction] in the Settings list.
3.
4.
Press the [Yes] button. A screen appears with pointer instructions on the top.
Press down lightly on the center of the “+” mark. Repeat as the “+” mark moves across the screen.
02operating
1.
2.
• If you do not press the center of the [+] properly, the cross mark appears repeatedly.
If you cannot run the Touch Screen Correction function in Settings because the touch screen input point
is incorrect:
1. Press and hold the Epicurious icon on the home screen for 5 seconds.
This will launch the select screen calibration function.
2. The screen will display a series of cross icons.
Press the exact center of each cross icon as it appears on the screen.
operating _73
DA68-02520B-03.indb 73
13. 4. 25. �� 2:28
S/W UPDATE
Lets you check the current software version and update it to new software when available.
1. Press the
button in the right bottom corner of the Settings list.
2. Select [S/W Update] in the Settings list.
• The software update is provided through the
wireless network. When updated software is
available, the [Upgrade] button on the bottom right
corner of the screen is activated.
When you press the [Upgrade] button, the
upgraded starts almost immediately (in about 10
seconds). When the update is complete, “Upgrade
completed.” message appear on the screen and
then press the [Reboot] button in the “Upgrade
completed.” message.
• Open Source License Notice - This product uses
open source software. The Open Source Licenses
are available on the product menu. Press [Legal
Information] button to see the detail information.
74_ operating
DA68-02520B-03.indb 74
13. 4. 25. �� 2:28
HOW TO USE THE DISPENSER
CAUTION
CAUTION
CAUTION
If a power failure occurs, ice cubes may
melt then freeze together when the power
comes back on, causing the dispenser to
be out of order. To prevent this problem,
after a power failure, pull out the ice bucket
and discard the residual ice or water.
After you dump the ice from the ice bucket,
you should press the dispenser lever once
with the ‘CUBED’ or ‘CRUSHED’ function
ON.
02operating
Touch the dispenser status on the Home screen to
select the type of dispenser you want.
Place your cup under the ice outlet and push
gently against the dispenser lever.
Make sure the glass is in line with the dispenser to
prevent the ice from bouncing out.
When Cubed Ice is selected after using the
Crushed Ice feature, a small amount of residual
crushed ice might be produced.
• When you select the Test button, you will
hear the refrigerator chime (ding-dong).
When the chime sounds, release the
[Test] button.
• The chime sounds automatically again
to let you know the ice maker is working
well.
Please wait 2 seconds before removing the
glass under the dispenser to prevent spills.
If the Fridge door opens, the Dispenser does not
work.
• Do not pull the lever out.
You could damage or break the lever’s spring.
• To clean the ice bin/bucket, wash with a mild
detergent, rinse well, and dry thoroughly it.
Do not use harsh or abrasive cleaners or
solvents.
check the water
level
Test button
• In case ice doesn’t come out, pull out the ice
bucket and press the test button located on the
right side of ice maker.
• Do not press the test button continuously when
the tray is filled with ice or water.
Water may overflow or ice may jam the bucket.
The ice maker will make new ice faster after you
return the ice bucket in the refrigerator.
• Normal Use
To fill the ice bucket to maximum capacity after
installation, follow these steps:
1. Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
-- Waiting 24 hours will allow your ice maker to
cool properly.
2. Dispense 4 to 6 ice cubes into the glass.
3. After 8, and then 16 hours, dispense a full glass
of ice.
operating _75
DA68-02520B-03.indb 75
13. 4. 25. �� 2:28
USING THE TWO LEVER
DISPENSER
CAUTION
Push the appropriate ice type button to
select what you want dispensed.
To operate the ice maker properly, water pressure
of 20 ~ 125 psi is required. If you have a long
vacation or business trip and won’t use the water
or ice dispensers for a long time:
-- Close the water valve. Otherwise, water leakage
may occur.
-- Remove all food.
-- Unplug the refrigerator.
-- Wipe excess moisture from inside and leave the
doors open.
Otherwise, odor and mold may develop.
Using the ice lever ( 1 )
Push the Ice lever dispenser
( 1 ) gently with your glass.
Ice will be released from the
dispenser.
You can choose the ice
type. (Refer to SETTING
THE DISPENSER.)
Using the Water lever ( 2 )
Push the Water lever dispenser ( 2 )
gently with your glass. Water will be
released from the dispenser.
Even if you push the
water and Ice lever
simultaneously, the
dispenser operates only
the option you selected or
pushed first.
Use only the ice maker provided with
the refrigerator. The water supply to
this refrigerator must only be installed/
connected by a suitably qualified person.
Connect to a potable water supply only.
1
Do not put your fingers, hands or any other
unsuitable objects in the chute or ice-maker bucket.
-- It may result in personal injury or material
damage.
2
Using the Ice & Water Dispenser together
To get Ice and water, push the Ice lever ( 1 ) first
for ice, then move your glass down and press the
water dispenser lever ( 2 ) for water.
If you use all the ice at once, you must
repeat Steps 2 and 3 on the previous
page. However, only wait 8 hours before
dispensing the first 4 to 6 ice cubes.
This will replenish the ice cubes and ensure
maximum ice production.
USING THE ICE OFF FUNCTION
When you select
the Ice Off mode,
remove all ice cubes
from the bucket. If
PULL
PUSH
you are not using
the ice dispenser,
the ice cubes may clump together.
Pull the lock lever forward to remove the bucket.
Throw away the ice cubes or clumped ice.
Push the bucket back until you hear a click.
Never put your finger or any other objects in the
dispenser opening.
-- It may cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with water
while it is in the refrigerator. Remove it to clean it.
Water clouding phenomenon
All water provided to the refrigerator flows
through the core filter which is an alkaline
water filter. In the filtering process, the
pressure of the water that has flowed out
of the filter is increased, and the water
becomes saturated with oxygen and
nitrogen. When this water flows out into
the air, the pressure plummets and the
oxygen and nitrogen get supersaturated,
which results in gas bubbles. The water
may temporarily look misty or cloudy due
to these oxygen bubbles. After a few
seconds, the water will look clear.
Please wait 1 second before removing
the cup after dispensing water to prevent
spills. Do not pull out the lever dispenser
after dispensing ice or water. It comes
back automatically. Ice is made in cubes.
When you select “Crushed”, the ice maker
grinds the ice cubes into crushed ice.
76_ operating
DA68-02520B-03.indb 76
13. 4. 25. �� 2:28
CHANGING THE WATER FILTER
1. Shut off the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
2
5. When the replacement is done, press and hold
the ‘Reset the water filter’ simultaneously for 3
or more seconds at the center of the screen.
(Refer to the “WATER FILTER” part on this
manual.)
02operating
To reduce risk of water damage to your
property DO NOT use generic brands of
water filters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER
FILTER. SAMSUNG will not be legally
responsible for any damage, including, but
not limited to property damage caused
by water leakage from use of a generic
water filter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG
Water Filter.
The Water Filter status icon on the Home
screen enables you to check the filter current
status of the water filter.
(Red)
The Filter icon turns red to let you know when
it is time to change your water filter cartridge.
To give you time to get a new filter, the red icon comes
on just before the capacity of the current filter runs
out. Changing the filter on time provides you with the
freshest, cleanest water from your refrigerator.
WARNING
• If you are in trouble of
inserting the water filter as
high pressure of water, shut
off the water supply valve.
• The locked symbol should be lined up with the
indicator line.
6. If you turned off the water supply, turn it back
on.
For a replacement water filter, you can visit
your local home Improvement center or
contact the Samsung Parts distributor.
Be sure the replacement water filter has
the SAMSUNG logo on the box and on the
water filter.
Link : http://www.samsungparts.com
1
• To change the water filter more easily,
shut off the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it to
stick. If you are having difficulties, grip the water
filter firmly and pull it hard.
• When you pull the water filter, a little water can
leak from the opening. This is normal.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow, empty the
2
water tray filter ( 3 ) and dry
3
around of case filter ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until it
locks.
Removing any residual matter inside the
water supply line after installing the water
filter.
1. Turn ON the main water supply and supply
water from water supply line.
2. Run water through the dispenser until the water
runs clear (approx. 6 to 7 minutes).
This will clean the water supply system and
remove air from the lines.
3. Additional flushing may be
required in some households.
4. Open the Refrigerator door and
make sure there are no water
leaks coming from the water
filter.
Be sure to flush the dispenser thoroughly,
otherwise water may drip from the
dispenser. This means that there is still air
in the line.
4
operating _77
DA68-02520B-03.indb 77
13. 4. 25. �� 2:28
Reverse Osmosis Water Supply
IMPORTANT : The pressure of the water supply
coming out of a reverse osmosis system going to
the water inlet valve of the refrigerator needs to be
between 241 and 827 kPa.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to
be a minimum of 276 to 414 kPa.
If the water pressure to the reverse osmosis system
is less than 276 to 414 kPa:
• Check to see whether the sediment filter in the
reverse osmosis system is blocked.
Replace the filter if necessary.
• Allow the storage tank on the reverse osmosis
system to refill after heavy usage.
• If your refrigerator has a water filter, it may
further reduce the water pressure when used
in conjunction with a reverse osmosis system.
Remove the water filter.
If you have questions about your water pressure,
call a licensed, qualified plumber.
PARTS AND FEATURES
Use this page to become more familiar with the parts and features of the refrigerator.
Interlocking switch
Light
Door Closer
FF Ice-Maker
Cover Eva (Light)
Right Door Bins
Dis Door Bins
Tempered glass
shelves
Slide-Shelf
Cap Chute
Light
Vertical Hinged
Section
Mid Door Bins
Vegetable & Fruit
Drawers
Water Filter
Left Door Bins
Quick-Space
Glass Shelf
Cover Veg
Light
Light
Light
Convertible Room
Auto Pull Out
Drawer
Tilting Pocket
Freezer Drawer
Bin
78_ operating
DA68-02520B-03.indb 78
13. 4. 25. �� 2:28
Temperature
You can select your Flex Zone temperature from
Meat/Fish mode, Cold Drinks mode, Deli/Snack, or
Wine/Party Dishes mode.
Selection Button
1. When “Wine/Party Dishes” is selected, the
temperature of Flex Zone will be kept around
5 °C. This feature helps keep food fresh for a
long time.
When the door opens, the interlock switch
automatically turns off the auger motor in
the ice maker for safety reasons.
When the interior or exterior LED lamp
has gone out, please contact your service
agents.
USING FLEX ZONE
The Flex Zone is a fullwidth drawer with an
adjustable temperature
control. You can use the
Flex Zone for large party
trays, deli items, wines,
pizzas, beverages, or miscellaneous items.
There is a temperature sensor which lets you adjust
the amount of cold air allowed into the Zone.
The control buttons are located on the cap door
center.
• Press the Temp button repeatedly until your
desired mode is lit.
• Each time you press the Temp button, you
change the mode in this order: Meat/Fish mode
(-1 °C), Cold Drinks mode, Deli/Snack (3 °C),
Wine/Party Dishes mode.
Initially, the Cold Drinks mode is selected.
The refrigerator will adjust the temperature in
the Flex Zone automatically to the temperature
you selected.
• The Flex Zone Temp. Display may change
depending on the number of items inside, where
they are located, the ambient temperature, and
how often the door is opened.
02operating
When closing the door, make sure the
Vertical Hinged Section is in the correct
position to avoid scratching the other door.
If the Vertical Hinged Section is reversed,
put it back to the right position and close
the door.
Moisture may appear at times on the
Vertical Hinged Section.
The door handle may become loose over
time. If this happens, tighten the bolts
found on the inside of the door.
If you close one door with a lot of force,
the other door may open.
2. When “Deli/Snack” is selected, the
temperature of Flex Zone will be kept around
3 °C. This feature helps keep food fresh for a
longer time.
3. When “Cold Drink” is selected, the
temperature of Flex Zone will be kept around
1 °C. This feature also helps keep drinks cold
and refreshing.
4. When “Meat/Fish” is selected, the temperature
of Flex Zone will be kept around-1 °C.
This feature also helps keep meat or fish fresh
for a longer time.
Wine Party
Dishes
Deli
Snacks
Cold
Drinks
Meat Fish
wine
pineapples
bottled
water
steaks
cold cuts
cocktails
lemons
juice
cakes
biscuits
soft drinks
bacon
cheeses
potatoes
beer
chili dogs
When the door opens, the interlock switch
automatically turns off the auger motor in
the ice maker for safety reasons.
CAUTION
When the door opens, the interlock switch
automatically turns off the auger motor in
the ice maker for safety reasons.
operating _79
DA68-02520B-03.indb 79
13. 4. 25. �� 2:28
REMOVING THE REFRIGERATOR
ACCESSORIES
3. Vegetable & Fruit Drawers
• After pulling out completely the vegetable pan,
take it out by lifting up the front and pull it
forward.
• To remove the shelf of the vegetable pan, press
the button on the left side of the shelf while you
are lifting it. Pull it out slowly.
1. Door Bins & Dairy Compartment
(1)
(2)
Rounded up while pressing
the button
Door Bins (1)
• To remove - Simply lift the bin up and pull
straight out.
• To put back - Slide it in above the desired
location and push down until it stops.
Button
CAUTION
Door Bins (2)
• To remove - Take the right side of the bin out by
lifting it obliquely along the guide and then, take
the left side out by pulling it from the door.
• To put back - Slide it into the original location
and push down until it is sticks.
CAUTION
Injury may occur if the door bins are not
firmly positioned. Do not allow children to
play with bins. Sharp corners of the bins
may cause injury.
Do not adjust a bin full of food. Remove
the food first. To remove dust, remove the
guard and wash in water.
2. Tempered Glass shelves
• To remove - Tilt up the front
of the shelf in the direction
shown ( 1 ) and lift it up
vertically ( 2 ). Pull the shelf
out.
• To put back - Tilt the front of
the shelf up and guide the
shelf hooks into the slots
at a desired height. Then,
lower the front of the shelf
so that the hooks can drop
into the slots.
CAUTION
The drawers need to be removed before
the glass shelf above them can be lifted
out.
4. Flex Zone
• To remove the Flex Zone - Pull the Flex door out
to full extension. Lift the Flex Zone up, pulling it
to your body with both hands.
• To put the Flex Zone back - Open the Flex door
to full extension. Tilt the front of the Flex Zone
up, place the back of the Flex Zone onto the
rails, and then lower the front until the whole
Zone rests on the rails.
1
2
When the Flex Zone or LED lighting are
not working, check the connectors [( 1 ),
( 2 ) shown below] for cracks or leaks.
The Tempered Glass shelves are heavy.
Use special care when removing them.
80_ operating
DA68-02520B-03.indb 80
13. 4. 25. �� 2:28
2
• To put back - Hook the ends of the tilting
pocket ( 1 ) onto the support guards ( 2 ) and
push down until they lock into place.
1
2
1. Refer to page 7 for disassembly instructions.
2. Open the cover housing with a flat-blade
screwdriver.
02operating
1
2. Super Extended Drawer
• To remove - Pull the drawer out to full extension.
Tilt up the rear of the drawer and lift straight
out.
• To put back - Place the drawer onto the rails ( 4 )
by tilting it up. Lower the drawer into place until
it is horizontal and slide the drawer ( 3 ) in.
4
3
USING THE DOORS
Ensure that the doors close all the way and are
securely sealed.
When the refrigerator door is only partially open, it
will automatically close.
But, the door will stay open if opened more
than the auto close range and you must close it
manually.
3. Freezer Drawer
• To remove the freezer drawer - Pull the freezer
drawer out fully. Tilt up the rear of the bin and
lift it out to remove.
• To put the freezer drawer back - Place the bin
into the rail assembly.
CAUTION
USING THE TILTING POCKET
You can use the Tilting
Pocket to store a pizza up
to 16 inches wide if you
place it as shown in the
illustration.
CAUTION
WARNING
Do not allow babies or children to go
inside the freezer drawer.
They could damage the refrigerator and
seriously injure themselves.
Do not sit on the freezer door.
The door may break. Do not allow children
to climb into the freezer drawer.
Do not remove the divider.
If trapped inside, children may get injured
or suffocate to death.
REMOVING THE FREEZER
ACCESSORIES
1. Tilting Pocket
• To remove - Remove the tilting pocket ( 1 ) by
pulling both support guards ( 2 ) aside.
Take out both support guards by pulling them
aside.
operating _81
DA68-02520B-03.indb 81
13. 4. 25. �� 2:28
FOOD STORAGE TIPS
Foods
Refrigerator
Freezer
Storage Tips
DAIRY PRODUCTS
Butter
2-3 Weeks
6-9 Months
Wrap or cover tightly.
Milk
1-2 Weeks
Not recommended
Check date code. Most milk and similar products are
sold in date-coded cartons that indicate a products’s
peak freshness. Re-seal with cap or wrap tightly. Do
not return unused portions to original container.
2-4 Weeks
Not recommended
3-4 Months
6 Months
2 Months
Not recommended
Cottage Cheese
10-15 Days
Not recommended
Cream
7-10 Days
2 Months
Sour Cream
2 Weeks
Not recommended
Cream Dips
(opened)
1 Week
Not recommended
Yogurt
10-14 Days
Not recommended
Frozen Yogurt
na
2 Months
Eggs (uncooked)
3-4 Weeks
Not recommended
Check date code. Store eggs in coldest part of
refrigerator and in their original container.
Eggs (cooked)
1 Week
Not recommended
Store in covered container
Leftover egg dishes
3-4 Days
Not recommended
Store in covered container
Apples
1 Month
Not recommended
Bananas
2-4 Days
Not recommended
3-5 Days
Not recommended
2-3 Days
12 Months
Apricots
3-5 Days
Not recommended
Grapes
2-5 Days
na
Pineapple (un-cut)
2-3 Days
Not recommended
Pineapple (cut)
5-7 Days
6-12 Months
Citrus
1-2 Weeks
Not recommended
Store uncovered.
Juice
6 Days
Not recommended
Check date code and re-seal in original container. Do
not return unused portions to original container.
Frozen Juice
Thawing only
12 Months
Check date code. Do not re-freeze.
Cream Cheese,
cheese food, and
cheese spread
Hard Cheese
(unopened)
Hard Cheese
(opened)
Check date code. Keep all cheese tightly packed in
moisture proof wrap
Check date code. Most yogurt, creams, and similar
products are sold in date-coded cartons that indicate a
product’s peak freshness. Re-seal or cover tightly.
Do not return unused portions to original container.
Check date code. Keep covered.
EGGS
FRESH FRUITS
Peaches, Melons,
Pears, Avocados
Berries and
Cherries
If storing in refrigerator, do not wash fruit before storing.
Store in moisture resistant bags or containers. Wrap cut
fruits. Some fruits darken when refrigerated.
82_ operating
DA68-02520B-03.indb 82
13. 4. 25. �� 2:28
Foods
Refrigerator
Freezer
Storage Tips
FISH AND SHELLFISH
Fish
Fatty Fish
(mackerel, trout,
salmon)
Lean Fish (cod,
flounder, etc)
2-3 Months
1-2 Days
6 Months
na
3 Months
Shrimp (uncooked)
1-2 Days
12 Months
Crab
3-5 Days
10 Months
Cooked Fish or
Shellfish
2-3 Days
3 Months
Chops
2-4 Days
6-12 Months
Ground
1 Day
3-4 Months
Roast
2-4 Days
6-12 Months
Bacon
1-2 Weeks
1-2 Months
Sausage
1-2 Days
1-2 Months
Steak
2-4 Days
6-9 Months
Poultry
1 Day
12 Months
Lunch meat
3-5 Days
1 Month
Meat
2-3 Days
2-3 Months
Poultry
2-3 Days
4-5 Months
Ham
1-2 weeks
1-2 Months
Frozen or Breaded
Keep in original wrapper and store in coldest part of
refrigerator. Package in vapor-proof and moisture proof
wrap for freezer. Freeze at -17 °C. Thaw in refrigerator
or check date code. Freeze in original packaging.
Shellfish
To freeze, package in vapor-proof and moisture-proof
container.
02operating
1-2 Days
MEAT
Fresh, Uncooked
Check date code for use. Store in coldest part
of refrigerator in original packaging. Package in
moisture-proof and vapor-proof container for freezing.
Recommended refrigerator temperature 33ºF to 36ºF
and freezer temperature 0ºF to 2ºF
Cooked
Check date code for use. Store in coldest part of
refrigerator in original packaging. Package in moistureproof and vapor-proof container for freezing.
Sources:
American Meat Institute Foundation. 1994. Yellow pages: answers to predictable questions consumers
ask about meat and poultry. American Meat Institute Food Marketing Institute. 1999. The food keeper.
Food Marketing Institute, Washington, D.C. Freeland-Graves, J.H. and G.C. Peckham. 1996.
Foundations of food preparation, 6th ed. Prentice-Hall, Inc. Englewood Cliffs, NJ. Hillers, V.N. 1993.
Storing foods at home. Washington State University Cooperative Extension, Pullman, WA. Publ. EB 1205.
National Restaurant Association. 2001. Be cool-chill out! Refrigerate promptly. National Restaurant
Association Education Foundation¼s International Food Safety Council, Washington, D.C. USDA. 1997.
Basics for handling food safely. U.S. Department of Agriculture, Food Safety and Inspection Service,
Washington, D.C.
operating _83
DA68-02520B-03.indb 83
13. 4. 25. �� 2:28
CLEANING THE REFRIGERATOR
Caring for your Samsung French Door Refrigerator
prolongs the life of your appliance and helps keep
the refrigerator free of odor and germs.
Cleaning the Interior
Clean the inside walls
and accessories with
a mild detergent and
then wipe dry with a soft
cloth. You can remove
the drawers and shelves
for a more thorough
cleaning. Just make sure to dry drawers and
shelves before putting them back into place.
Cleaning the Exterior
Wipe the control panel
and digital display with a
damp, clean, soft cloth.
Do not spray water
directly on the surface of
the refrigerator.
The doors, handles and cabinet surfaces should
be cleaned with a mild detergent and then wiped
dry with a soft cloth.
To keep your appliance looking its best, polish the
exterior once or twice a year.
CAUTION
Do not spray water directly on the
refrigerator.
Cleaning the Ice / Water Dispenser
Push down one end of the tray dispenser and
remove it. Wipe the Ice / Water Dispenser with a
clean, soft cloth.
CAUTION
When you use the crushed ice
selection from the dispenser,
some residual ice chips may
start to collect in the ice chute.
To prevent that residual ice from
melting and running out of the
chute, you should clean out the
residual ice when you see it start to collect
in the ice chute.
Cleaning the Rubber door seals
If the rubber door seals are dirty, the doors may
not close properly, and the refrigerator will not
operate efficiently. Keep the door seals free of
dust or stains by cleaning the doors with a mild
detergent and damp cloth.
Wipe dry with a clean, soft cloth.
CAUTION
Do not clean the refrigerator with benzene,
thinner, or car detergent due to risk of fire.
Cleaning the rear side of the refrigerator
CAUTION
CAUTION
Do not use benzene, thinner, or Clorox for
cleaning. They may damage the surface of
the appliance and may cause a fire.
To keep cords and exposed parts free of dust and
dirt accumulation. Vacuum the rear side of the
appliance once or twice a year.
Printed letters on the display
may be erased if a stainless
cleaner is applied directly to
the area where the letters are
printed.
1
CAUTION
Do not remove the back cover ( 1 ).
You could suffer an electric shock.
84_ operating
DA68-02520B-03.indb 84
13. 4. 25. �� 2:28
troubleshooting
SOLUTION
The refrigerator
does not work at
all or it does not
chill sufficiently.
• Check that the power plug is properly connected.
• Is the temperature control on the display panel set to the correct temperature?
Try setting it to a lower temperature.
• Is the refrigerator in direct sunlight or located too near a heat source?
• Is the back of the refrigerator too close to the wall and therefore keeping air from
circulating?
Food in the fridge
is frozen.
• Is the temperature control on the display panel set to the correct temperature?
Try setting it to a warmer temperature.
• Is the temperature in the room very low?
• Did you store food with a high water content in the coldest part of the fridge?
You hear unusual
noises or sounds.
• Check that the refrigerator is level and stable.
• Is the back of the refrigerator too close to the wall and therefore keeping air from
circulating?
• Was anything dropped behind or under the refrigerator?
• If you hear a “ticking” sound from inside the refrigerator, this is normal.
It occurs because various parts contract or expand in response to temperature
changes in the refrigerator interior.
The front corners
of the appliance
are hot and
condensation is
occurring.
• Some heat is normal as anti-condensators are installed in the front corners of the
refrigerator to prevent condensation.
• Is the refrigerator door ajar? Condensation can occur when you leave the door open
for a long time.
Ice is not
dispensing.
• Did you wait for 12 hours after installation of the water supply line before making ice?
• Is the water line connected and the shut-off valve open?
• Did you manually stop the ice making function?
Make sure Ice Type is set to Cubed or Crushed.
• Are there ice cubes frozen together in the ice maker bucket?
• Is the freezer temperature too warm? Try setting the freezer temperature lower.
You can hear water
bubbling in the
refrigerator.
• This is normal. The bubbling comes from the refrigerant liquid circulating through the
refrigerator.
There is a bad
smell in the
refrigerator.
• Has a food item spoiled?
• Make sure that strong smelling food (for example, fish) is wrapped so that it is airtight.
• Clean out your freezer periodically and throw away any spoiled or suspect food.
Frost forms on the
walls of the freezer.
• Is the air vent blocked? Remove any obstructions so air can circulate freely.
• Allow sufficient space between the foods stored for efficient air circulation.
• Is the freezer door closed properly?
Water dispenser is
not functioning.
• Is the water line connected and the shut-off valve open?
• Has the water supply line tubing been crushed or kinked?
Make sure the tubing is free and clear of any obstruction.
• Is the water tank frozen because the refrigerator temperature is too low?
Try selecting a warmer setting on the main display panel.
03troubleshooting
PROBLEM
troubleshooting _85
DA68-02520B-03.indb 85
13. 4. 25. �� 2:28
PROBLEM
SOLUTION
Display does not
work!
• Press the Reset button over one second to reset the memory. With this, the user
information is not to be reset.
Photos not
showing with a
memory card
connected
• If the “A SD/MMC card is connected” messages do not appear on the screen, check
if the memory type is SD / SDHC / MMC / HS MMC.
• Check if there are photos or images stored in the memory card.
• Check if the images in the memory card are JPEG (JPG) types.
The LCD
screen turns off
frequently.
• This is a power-saving function and it is normal.
• At the Settings-Display, the Screensaver Running Time can be set.
There is an after
image or an edge
line left on the
screen.
• Still images can cause permanent damage to the LCD screen. When you select
Screensavers, select a number of themes so the image changes frequently.
NOTE : Defects caused by this are not be covered by the factory warranty.
The input point of
the touch screen is
not correct.
• Run the Touch Screen Calibration function at the Settings.
There is no
wireless AP
detected.
• Check if the power for the wireless AP is on.
• Check if the wireless AP supports IEEE802.11b/g/n.
• If the wireless AP is located away from the Fridge, move the wireless AP closer to the
Fridge and check if it is detected.
• Turn the power of both the Wireless AP and the Fridge off and on.
It is not able to
connect to the
wireless AP.
• Check if the wireless AP supports IEEE802.11b/g/n.
• Check the status of the internet connection of the wireless AP.
• Check if the current cost rate plan for the internet covers the wireless network
connection.
If it does, check how many connections are allowed.
• Your Refrigerator may not be able to connect to the Internet because your ISP has
permanently registered the MAC address (a unique identifying number) of your PC
or modem, which it then authenticates each time you connect to the Internet as a
way of preventing unauthorized access. As your Refrigerator has a different MAC
address, your ISP can not authenticate its MAC address, and your Refrigerator can
not connect. To resolve this problem, ask your ISP about the procedures required to
connect devices other than a PC (such as your Refrigerator) to the Internet. (To find
the MAC address of your Fridge, touch Settings --->WiFi Networks, and then look on
the bottom of the screen that lists the available network connections.)
• Turn the power of both the Wireless AP and the Fridge off and on.
Can’t remember
the password for
the wireless AP
connection.
• Refer to the wireless AP manual and reset the password.
86_ troubleshooting
DA68-02520B-03.indb 86
13. 4. 25. �� 2:28
SOLUTION
Functions using
the wireless
network (Wi-FI) do
not work.
• Functions using the wireless network (Wi-Fi) such as Epicurious, Calendar,
WeatherBug, AP News, Twitter can be used only if the refrigerator is connected to
your wireless network (Wi-Fi).
• If there are any other devices connected to the wireless network, please check the
connection status of the devices.
• Because these services depend on data downloaded from the internet, the
information updates can be delayed or cut depending on the status of the internet
connection.
• Turn the power of both the Wireless AP and the Fridge off and on.
Can’t connect
to the external
devices being
detected.
• If the network connection of an external device the Fridge detects was shut down
abnormally (by a power failure or by moving out of range, etc), the device’s network
information will remain on the network list (as stipulated by DLNA specifications), but
its connection will not be available.
• Select the Photos function - All Share, and then search for the external devices again.
After turn on the
power, is possible
to operate only the
dispenser selection
button.
• Click the “Dispenser OK” button which is at the bottom of display .
If the “”Dispenser OK” button is changed to “Complete”, turn the power off and on
again. It is correct to show the “Time Zone Setting screen”.
Condensation or
water drops forms
on both sides
of fridge door’s
central part.
• Condensation or water drops may form if the humidity is too high while the refrigerator
is operating.
• If condensation or water drops appears on both sides of fridge door’s central part,
turn the Energy Saver mode off after removing the condensation.
03troubleshooting
PROBLEM
troubleshooting _87
DA68-02520B-03.indb 87
13. 4. 25. �� 2:28
In case the need for servicing
arises
Do not hesitate to call any Samsung Authorized Service Center nearby giving them your name,
address and telephone number when your product is not functioning properly.
Warranty Information (CANADA)
Limited Warranty for Original Purchaser
This Samsung product is warranted by Samsung Electronics Canada, Inc. (hereafter referred to as SECA)
against manufacturing defects in material or workmanship for the following periods:
Labor : 1 year (in-home)
Parts : 1 year
Inverter Compressor : 10 years
SECA further warrants that if this product fails to operate properly within the specified warranty period and
the failure is due to improper workmanship or defective material, SECA will repair or replace the product
at its option.
All warranty repairs or part replacements must be performed by a SECA Authorized Service Center.
(To find the nearest SECA Service Center, call 1-800-SAMSUNG (7267864) or visit our web site at
www.samsung.com/ca)
Obligation to the Original Owner
The original dated sales receipt must be retained by the customer and is the only acceptable proof of
purchase. It must be presented to a SECA Authorized Service Center at the time service is requested
before warranty services are rendered. On all carry-in models, transportation to and from the Authorized
Service Center is the responsibility of the customer.
Exclusions of the Warranty
This warranty does not cover damage due to accident, fire, flood, and/or other Acts of God, misuse,
incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use, or damage
that occurs during shipping. Customer adjustments which are explained in this owners manual are not
covered under the terms of this warranty. This warranty will automatically be voided for any unit found
with a missing or altered serial number. This warranty is valid only on products purchased and used in the
Canada.
88_ warranty
DA68-02520B-03.indb 88
13. 4. 25. �� 2:28
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
04warranty
Customer Care Center 1-800-SAMSUNG(7267864)
Customer Care Center fax. 1-866-436-4617
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
SAMSUNG ELECTRONICS CANADA, INC.
55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA
TEL : 905-542-3535 FAX : 905-542-3835
1-800-SAMSUNG (726-7864)
www.samsung.com/ca
warranty _89
DA68-02520B-03.indb 89
13. 4. 25. �� 2:28
Scan the QR code* or visit
www.samsung.com/spsn
to view our helpful
How-to Videos and Live Shows
-- Requires reader to be installed on
your smartphone
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
U.S
800-SAMSUNG
(800-726-7864)
www.samsung.com
Samsung Electronics America, Inc. 85
Challenger Road Ridgefield Park, NJ 07660
CANADA
800-SAMSUNG
(800-726-7864)
www.samsung.com/ca
Samsung Electronics Canada Inc. Customer
Service, 55 Standish Court Mississauga, Ontario
L5R 4B2 Canada
DA68-02520B-03.indb 90
13. 4. 25. �� 2:28