Miller Electric 714D Owner`s manual

OM-1500-2
203 442
February 2001
Processes
MIG (GMAW) Welding
Flux Cored (FCAW) Welding
(Gas-and Self-Shielding)
Submerged (SAW) Welding
Description
Wire Feeder
(Use with CV Power Sources)
714D Swingarc

714D12 and 714D16
Visit our website at
www.MillerWelds.com
From Miller to You
Thank you and congratulations on choosing Miller.
Now you can get the job done and get it done right. We
know you don’t have time to do it any other way.
That’s why when Niels Miller first started building arc
welders in 1929, he made sure his products offered
long-lasting value and superior quality. Like you, his
customers couldn’t afford anything less. Miller
products had to be more than the best they could be.
They had to be the best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owner’s Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety precautions. They
will help you protect yourself against potential hazards on the worksite.
We’ve made installation and operation quick
and easy. With Miller you can count on years
of reliable service with proper maintenance.
And if for some reason the unit needs repair,
there’s a Troubleshooting section that will
Miller is the first welding help you figure out what the problem is. The
equipment manufacturer in parts list will then help you to decide which
the U.S.A. to be registered to
the ISO 9001 Quality System exact part you may need to fix the problem.
Standard.
Warranty and service information for your
particular model are also provided.
Working as hard as you do
– every power source from
Miller is backed by the most
hassle-free warranty in the
business.
Miller offers a Technical
Manual which provides
more detailed service and
parts information for your
unit. To obtain a Technical
Manual, contact your local
distributor. Your distributor
can also supply you with
Welding Process Manuals
such as SMAW, GTAW,
GMAW, and GMAW-P.
Miller Electric manufactures a full line
of welders and welding related equipment.
For information on other quality Miller
products, contact your local Miller distributor
to receive the latest full line catalog or
individual catalog sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller,
or visit us at www.MillerWelds.com on the web.
TABLE OF CONTENTS
WARNING
This product, when used
for welding or cutting,
produces fumes or
gases which contain
chemicals known to the
State of California to
cause birth defects and,
in some cases, cancer.
(California Health &
Safety Code Section
25249.5 et seq.)
OM-1500–2
SECTION 1 – SAFETY PRECAUTIONS - READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3. Additional Symbols For Installation, Operation, And Maintenance . . . . . . . . . . . . . . . . . . . . .
1-4. Principal Safety Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-5. EMF Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 1 – CONSIGNES DE SECURITE – LIRE AVANT UTILISATION . . . . . . . . . . . . . . . . . . . . .
1-1. Signification des symboles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2. Dangers relatifs au soudage à l’arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement
et la maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-4. Principales normes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-5. Information sur les champs électromagnétiques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 2 – INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 3 – INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1. Installing Swivel Into Pipe Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2. Adjusting Control Tilt Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3. Installing Boom And Reel Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4. Installing Wire Guide Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5. Equipment Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6. Control Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-7. 14-Pin Plug Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8. Removing Safety Collar And Adjusting Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-9. Gun Recommendation Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-10. Wire Type, Size, And Feed Speed Capability Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-11. Installing And Threading Welding Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-12. Setting Internal DIP Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 4 – OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1. Operational Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2. Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3. Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4. Program Push Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5. Upper Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6. Lower Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-7. Setup Push Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8. Adjust Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-9. Sequence Push Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-10. Auxiliary Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-11. Jog/Purge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 5 – SETTING SEQUENCE PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-1. Sequence Parameters In A Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 6 – SETTING DUAL SCHEDULE PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-1. Optional Dual Schedule Switch Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 7 – MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-1. Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-2. Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 8 – ELECTRICAL DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 9 – PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARRANTY
1
1
1
3
3
4
5
5
5
7
8
8
9
9
9
9
10
10
11
11
12
12
13
13
13
14
15
16
16
16
17
17
18
18
19
19
20
21
22
23
23
24
24
24
24
25
26
27
28
SECTION 1 – SAFETY PRECAUTIONS - READ BEFORE USING
som _nd_4/98
1-1. Symbol Usage
Means Warning! Watch Out! There are possible hazards
with this procedure! The possible hazards are shown in
the adjoining symbols.
Y Marks a special safety message.
. Means “Note”; not safety related.
This group of symbols means Warning! Watch Out! possible
ELECTRIC SHOCK, MOVING PARTS, and HOT PARTS hazards.
Consult symbols and related instructions below for necessary actions
to avoid the hazards.
1-2. Arc Welding Hazards
Y The symbols shown below are used throughout this manual to
call attention to and identify possible hazards. When you see
the symbol, watch out, and follow the related instructions to
avoid the hazard. The safety information given below is only
a summary of the more complete safety information found in
the Safety Standards listed in Section 1-4. Read and follow all
Safety Standards.
D If earth grounding of the workpiece is required, ground it directly
with a separate cable.
Y Only qualified persons should install, operate, maintain, and
repair this unit.
D Wear a safety harness if working above floor level.
D Keep all panels and covers securely in place.
Y During operation, keep everybody, especially children, away.
D Clamp work cable with good metal-to-metal contact to workpiece
or worktable as near the weld as practical.
ELECTRIC SHOCK can kill.
Touching live electrical parts can cause fatal shocks
or severe burns. The electrode and work circuit is
electrically live whenever the output is on. The input
power circuit and machine internal circuits are also
live when power is on. In semiautomatic or automatic wire welding, the
wire, wire reel, drive roll housing, and all metal parts touching the
welding wire are electrically live. Incorrectly installed or improperly
grounded equipment is a hazard.
D Do not touch electrode if you are in contact with the work, ground,
or another electrode from a different machine.
D Use only well-maintained equipment. Repair or replace damaged
parts at once. Maintain unit according to manual.
D Insulate work clamp when not connected to workpiece to prevent
contact with any metal object.
D Do not connect more than one electrode or work cable to any
single weld output terminal.
SIGNIFICANT DC VOLTAGE exists after removal of
input power on inverters.
D Turn Off inverter, disconnect input power, and discharge input
capacitors according to instructions in Maintenance Section
before touching any parts.
D Do not touch live electrical parts.
D Wear dry, hole-free insulating gloves and body protection.
D Insulate yourself from work and ground using dry insulating mats
or covers big enough to prevent any physical contact with the work
or ground.
D Do not use AC output in damp areas, if movement is confined, or if
there is a danger of falling.
D Use AC output ONLY if required for the welding process.
D If AC output is required, use remote output control if present on
unit.
D Disconnect input power or stop engine before installing or
servicing this equipment. Lockout/tagout input power according to
OSHA 29 CFR 1910.147 (see Safety Standards).
D Properly install and ground this equipment according to its
Owner’s Manual and national, state, and local codes.
D Keep your head out of the fumes. Do not breathe the fumes.
D Always verify the supply ground – check and be sure that input
power cord ground wire is properly connected to ground terminal in
disconnect box or that cord plug is connected to a properly
grounded receptacle outlet.
D When making input connections, attach proper grounding conductor first – double-check connections.
D Frequently inspect input power cord for damage or bare wiring –
replace cord immediately if damaged – bare wiring can kill.
D Turn off all equipment when not in use.
D Do not use worn, damaged, undersized, or poorly spliced cables.
D Do not weld in locations near degreasing, cleaning, or spraying operations. The heat and rays of the arc can react with vapors to form
highly toxic and irritating gases.
D Do not drape cables over your body.
FUMES AND GASES can be hazardous.
Welding produces fumes and gases. Breathing
these fumes and gases can be hazardous to your
health.
D If inside, ventilate the area and/or use exhaust at the arc to remove
welding fumes and gases.
D If ventilation is poor, use an approved air-supplied respirator.
D Read the Material Safety Data Sheets (MSDSs) and the
manufacturer’s instructions for metals, consumables, coatings,
cleaners, and degreasers.
D Work in a confined space only if it is well ventilated, or while
wearing an air-supplied respirator. Always have a trained watchperson nearby. Welding fumes and gases can displace air and
lower the oxygen level causing injury or death. Be sure the breathing air is safe.
D Do not weld on coated metals, such as galvanized, lead, or
cadmium plated steel, unless the coating is removed from the weld
area, the area is well ventilated, and if necessary, while wearing an
air-supplied respirator. The coatings and any metals containing
these elements can give off toxic fumes if welded.
OM-1500–2 Page 1
ARC RAYS can burn eyes and skin.
Arc rays from the welding process produce intense
visible and invisible (ultraviolet and infrared) rays
that can burn eyes and skin. Sparks fly off from the
weld.
D Wear a welding helmet fitted with a proper shade of filter to protect
your face and eyes when welding or watching (see ANSI Z49.1
and Z87.1 listed in Safety Standards).
D Wear approved safety glasses with side shields under your
helmet.
D Use protective screens or barriers to protect others from flash and
glare; warn others not to watch the arc.
D Wear protective clothing made from durable, flame-resistant material (leather and wool) and foot protection.
BUILDUP OF GAS can injure or kill.
D Shut off shielding gas supply when not in use.
D Always ventilate confined spaces or use
approved air-supplied respirator.
HOT PARTS can cause severe burns.
D Do not touch hot parts bare handed.
D Allow cooling period before working on gun or
torch.
MAGNETIC FIELDS can affect pacemakers.
WELDING can cause fire or explosion.
Welding on closed containers, such as tanks,
drums, or pipes, can cause them to blow up. Sparks
can fly off from the welding arc. The flying sparks, hot
workpiece, and hot equipment can cause fires and
burns. Accidental contact of electrode to metal objects can cause
sparks, explosion, overheating, or fire. Check and be sure the area is
safe before doing any welding.
D Protect yourself and others from flying sparks and hot metal.
D Do not weld where flying sparks can strike flammable material.
D Remove all flammables within 35 ft (10.7 m) of the welding arc. If
this is not possible, tightly cover them with approved covers.
D Be alert that welding sparks and hot materials from welding can
easily go through small cracks and openings to adjacent areas.
D Watch for fire, and keep a fire extinguisher nearby.
D Be aware that welding on a ceiling, floor, bulkhead, or partition can
cause fire on the hidden side.
D Do not weld on closed containers such as tanks, drums, or pipes,
unless they are properly prepared according to AWS F4.1 (see
Safety Standards).
D Connect work cable to the work as close to the welding area as
practical to prevent welding current from traveling long, possibly
unknown paths and causing electric shock and fire hazards.
D Do not use welder to thaw frozen pipes.
D Remove stick electrode from holder or cut off welding wire at
contact tip when not in use.
D Wear oil-free protective garments such as leather gloves, heavy
shirt, cuffless trousers, high shoes, and a cap.
D Remove any combustibles, such as a butane lighter or matches,
from your person before doing any welding.
FLYING METAL can injure eyes.
D Welding, chipping, wire brushing, and grinding
cause sparks and flying metal. As welds cool,
they can throw off slag.
D Wear approved safety glasses with side
shields even under your welding helmet.
OM-1500–2 Page 2
D Pacemaker wearers keep away.
D Wearers should consult their doctor before
going near arc welding, gouging, or spot
welding operations.
NOISE can damage hearing.
Noise from some processes or equipment can
damage hearing.
D Wear approved ear protection if noise level is
high.
CYLINDERS can explode if damaged.
Shielding gas cylinders contain gas under high
pressure. If damaged, a cylinder can explode. Since
gas cylinders are normally part of the welding
process, be sure to treat them carefully.
D Protect compressed gas cylinders from excessive heat, mechanical shocks, slag, open flames, sparks, and arcs.
D Install cylinders in an upright position by securing to a stationary
support or cylinder rack to prevent falling or tipping.
D Keep cylinders away from any welding or other electrical circuits.
D Never drape a welding torch over a gas cylinder.
D Never allow a welding electrode to touch any cylinder.
D Never weld on a pressurized cylinder – explosion will result.
D Use only correct shielding gas cylinders, regulators, hoses, and fittings designed for the specific application; maintain them and
associated parts in good condition.
D Turn face away from valve outlet when opening cylinder valve.
D Keep protective cap in place over valve except when cylinder is in
use or connected for use.
D Read and follow instructions on compressed gas cylinders,
associated equipment, and CGA publication P-1 listed in Safety
Standards.
1-3. Additional Symbols For Installation, Operation, And Maintenance
FIRE OR EXPLOSION hazard.
MOVING PARTS can cause injury.
D Do not install or place unit on, over, or near
combustible surfaces.
D Do not install unit near flammables.
D Do not overload building wiring – be sure power supply system is
properly sized, rated, and protected to handle this unit.
D Keep away from moving parts such as fans.
D Keep all doors, panels, covers, and guards
closed and securely in place.
FALLING UNIT can cause injury.
H.F. RADIATION can cause interference.
D Use lifting eye to lift unit only, NOT running
gear, gas cylinders, or any other accessories.
D Use equipment of adequate capacity to lift and
support unit.
D If using lift forks to move unit, be sure forks are
long enough to extend beyond opposite side of
unit.
D
OVERUSE can cause OVERHEATING
D
D Allow cooling period; follow rated duty cycle.
D Reduce current or reduce duty cycle before
starting to weld again.
D Do not block or filter airflow to unit.
D
D
D High-frequency (H.F.) can interfere with radio
navigation, safety services, computers, and
communications equipment.
D Have only qualified persons familiar with
electronic equipment perform this installation.
The user is responsible for having a qualified electrician promptly correct any interference problem resulting from the installation.
If notified by the FCC about interference, stop using the
equipment at once.
Have the installation regularly checked and maintained.
Keep high-frequency source doors and panels tightly shut, keep
spark gaps at correct setting, and use grounding and shielding to
minimize the possibility of interference.
STATIC (ESD) can damage PC boards.
D Put on grounded wrist strap BEFORE handling
boards or parts.
D Use proper static-proof bags and boxes to
store, move, or ship PC boards.
ARC WELDING can cause interference.
MOVING PARTS can cause injury.
D Keep away from moving parts.
D Keep away from pinch points such as drive
rolls.
D
D
WELDING WIRE can cause injury.
D Do not press gun trigger until instructed to do
so.
D Do not point gun toward any part of the body,
other people, or any metal when threading
welding wire.
D
D
D Electromagnetic energy can interfere with
sensitive electronic equipment such as
computers and computer-driven equipment
such as robots.
D Be sure all equipment in the welding area is
electromagnetically compatible.
To reduce possible interference, keep weld cables as short as
possible, close together, and down low, such as on the floor.
Locate welding operation 100 meters from any sensitive electronic equipment.
Be sure this welding machine is installed and grounded
according to this manual.
If interference still occurs, the user must take extra measures
such as moving the welding machine, using shielded cables,
using line filters, or shielding the work area.
1-4. Principal Safety Standards
Safety in Welding and Cutting, ANSI Standard Z49.1, from American
Welding Society, 550 N.W. LeJeune Rd, Miami FL 33126
Safety and Health Standards, OSHA 29 CFR 1910, from Superintendent of Documents, U.S. Government Printing Office, Washington, D.C.
20402.
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers That Have Held Hazardous Substances, American
Welding Society Standard AWS F4.1, from American Welding Society,
550 N.W. LeJeune Rd, Miami, FL 33126
National Electrical Code, NFPA Standard 70, from National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 1235 Jefferson Davis Highway,
Suite 501, Arlington, VA 22202.
Code for Safety in Welding and Cutting, CSA Standard W117.2, from
Canadian Standards Association, Standards Sales, 178 Rexdale
Boulevard, Rexdale, Ontario, Canada M9W 1R3.
Safe Practices For Occupation And Educational Eye And Face
Protection, ANSI Standard Z87.1, from American National Standards
Institute, 1430 Broadway, New York, NY 10018.
Cutting And Welding Processes, NFPA Standard 51B, from National
Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
OM-1500–2 Page 3
1-5. EMF Information
Considerations About Welding And The Effects Of Low Frequency
Electric And Magnetic Fields
Welding current, as it flows through welding cables, will cause electromagnetic fields. There has been and still is some concern about such
fields. However, after examining more than 500 studies spanning 17
years of research, a special blue ribbon committee of the National
Research Council concluded that: “The body of evidence, in the
committee’s judgment, has not demonstrated that exposure to powerfrequency electric and magnetic fields is a human-health hazard.”
However, studies are still going forth and evidence continues to be
examined. Until the final conclusions of the research are reached, you
may wish to minimize your exposure to electromagnetic fields when
welding or cutting.
To reduce magnetic fields in the workplace, use the following
procedures:
OM-1500–2 Page 4
1. Keep cables close together by twisting or taping them.
2. Arrange cables to one side and away from the operator.
3. Do not coil or drape cables around your body.
4. Keep welding power source and cables as far away from operator as practical.
5. Connect work clamp to workpiece as close to the weld as possible.
About Pacemakers:
Pacemaker wearers consult your doctor first. If cleared by your doctor,
then following the above procedures is recommended.
SECTION 1 – CONSIGNES DE SECURITE – LIRE AVANT
UTILISATION
som _nd_fre 4/98
1-1. Signification des symboles
Signifie Mise en garde ! Soyez vigilant ! Cette procédure
présente des risques de danger ! Ceux-ci sont identifiés
par des symboles adjacents aux directives.
Y Identifie un message de sécurité particulier.
. Signifie NOTA ; n’est pas relatif à la sécurité.
Ce groupe de symboles signifie Mise en garde ! Soyez vigilant ! Il y a des
risques de danger reliés aux CHOCS ÉLECTRIQUES, aux PIÈCES EN
MOUVEMENT et aux PIÈCES CHAUDES. Reportez-vous aux symboles
et aux directives ci-dessous afin de connaître les mesures à prendre pour
éviter tout danger.
1-2. Dangers relatifs au soudage à l’arc
Y Les symboles présentés ci-après sont utilisés tout au long du
présent manuel pour attirer votre attention et identifier les risques
de danger. Lorsque vous voyez un symbole, soyez vigilant et
suivez les directives mentionnées afin d’éviter tout danger. Les
consignes de sécurité présentées ci-après ne font que résumer
l’information contenue dans les normes de sécurité énumérées
à la section 1-4. Veuillez lire et respecter toutes ces normes de
sécurité.
Y L’installation, l’utilisation, l’entretien et les réparations ne doivent être confiés qu’à des personnes qualifiées.
Y Au cours de l’utilisation, tenir toute personne à l’écart et plus particulièrement les enfants.
D N’utiliser qu’un matériel en bon état. Réparer ou remplacer sur-lechamp les pièces endommagées. Entretenir l’appareil conformément
à ce manuel.
D Porter un harnais de sécurité quand on travaille en hauteur.
D Maintenir solidement en place tous les panneaux et capots.
D Fixer le câble de retour de façon à obtenir un bon contact métal-métal
avec la pièce à souder ou la table de travail, le plus près possible de la
soudure.
D
Isoler la pince de masse quand pas mis à la pièce pour éviter le contact
avec tout objet métallique.
UN CHOC ÉLECTRIQUE peut tuer.
Un simple contact avec des pièces électriques peut
provoquer une électrocution ou des blessures graves.
L’électrode et le circuit de soudage sont sous tension
dès que l’appareil est sur ON. Le circuit d’entrée et les
circuits internes de l’appareil sont également sous
tension à ce moment-là. En soudage semi-automatique ou automatique,
le fil, le dévidoir, le logement des galets d’entraînement et les pièces
métalliques en contact avec le fil de soudage sont sous tension. Des
matériels mal installés ou mal mis à la terre présentent un danger.
Il y a DU COURANT CONTINU IMPORTANT dans les
convertisseurs après la suppression de l’alimentation électrique.
D Arrêter les convertisseurs, débrancher le courant électrique, et décharger les condensateurs d’alimentation selon les instructions
indiquées dans la partie entretien avant de toucher les pièces.
D Ne jamais toucher les pièces électriques sous tension.
D Porter des gants et des vêtements de protection secs ne comportant
pas de trous.
D S’isoler de la pièce et de la terre au moyen de tapis ou d’autres
moyens isolants suffisamment grands pour empêcher le contact physique éventuel avec la pièce ou la terre.
D
D
D
Ne pas se servir de source électrique àcourant électrique dans les zones
humides, dans les endroits confinés ou là où on risque de tomber.
Se servir d’une source électrique àcourant électrique UNIQUEMENT si le
procédé de soudage le demande.
Si l’utilisation d’une source électrique àcourant électrique s’avère nécessaire, se servir de la fonction de télécommande si l’appareil en est équipé.
D Couper l’alimentation ou arrêter le moteur avant de procéder à l’installation, à la réparation ou à l’entretien de l’appareil. Déverrouiller
l’alimentation selon la norme OSHA 29 CFR 1910.147 (voir normes de
sécurité).
D Installer et mettre à la terre correctement cet appareil conformément à
son manuel d’utilisation et aux codes nationaux, provinciaux et
municipaux.
D Toujours vérifier la terre du cordon d’alimentation – Vérifier et s’assurer que le fil de terre du cordon d’alimentation est bien raccordé à la
borne de terre du sectionneur ou que la fiche du cordon est raccordée
à une prise correctement mise à la terre.
D En effectuant les raccordements d’entrée fixer d’abord le conducteur
de mise à la terre approprié et contre-vérifier les connexions.
D Vérifier fréquemment le cordon d’alimentation pour voir s’il n’est pas
endommagé ou dénudé – remplacer le cordon immédiatement s’il est
endommagé – un câble dénudé peut provoquer une électrocution.
D Mettre l’appareil hors tension quand on ne l’utilise pas.
D Ne pas utiliser des câbles usés, endommagés, de grosseur insuffisante ou mal épissés.
D Ne pas enrouler les câbles autour du corps.
D Si la pièce soudée doit être mise à la terre, le faire directement avec un
câble distinct.
D Ne pas toucher l’électrode quand on est en contact avec la pièce, la
terre ou une électrode provenant d’une autre machine.
LES FUMÉES ET LES GAZ peuvent
être dangereux.
Le soudage génère des fumées et des gaz. Leur
inhalation peut être dangereux pour votre santé.
D
D
D
D
D
D
D Eloigner votre tête des fumées. Ne pas respirer
les fumées.
A l’intérieur, ventiler la zone et/ou utiliser un échappement au niveau
de l’arc pour l’évacuation des fumées et des gaz de soudage.
Si la ventilation est insuffisante, utiliser un respirateur à alimentation d’air homologué.
Lire les spécifications de sécurité des matériaux (MSDSs) et les
instructions du fabricant concernant les métaux, les consommables, les revêtements, les nettoyants et les dégraisseurs.
Travailler dans un espace fermé seulement s’il est bien ventilé ou en
portant un respirateur à alimentation d’air. Demander toujours à un
surveillant dûment formé de se tenir à proximité. Des fumées et des
gaz de soudage peuvent déplacer l’air et abaisser le niveau d’oxygène provoquant des blessures ou des accidents mortels. S’assurer que l’air de respiration ne présente aucun danger.
Ne pas souder dans des endroits situés à proximité d’opérations de
dégraissage, de nettoyage ou de pulvérisation. La chaleur et les
rayons de l’arc peuvent réagir en présence de vapeurs et former des
gaz hautement toxiques et irritants.
Ne pas souder des métaux munis d’un revêtement, tels que l’acier
galvanisé, plaqué en plomb ou au cadmium à moins que le revêtement n’ait été enlevé dans la zone de soudure, que l’endroit soit bien
ventilé, et si nécessaire, en portant un respirateur à alimentation
d’air. Les revêtements et tous les métaux renfermant ces éléments
peuvent dégager des fumées toxiques en cas de soudage.
OM-1500–2 Page 5
LES RAYONS DE L’ARC peuvent provoquer des brûlures dans les yeux et
sur la peau.
Le rayonnement de l’arc du procédé de soudage
génère des rayons visibles et invisibles intenses
(ultraviolets et infrarouges) susceptibles de provoquer
des brûlures dans les yeux et sur la peau. Des étincelles sont projetées
pendant le soudage.
D Porter un casque de soudage muni d’un écran de filtre approprié pour
protéger votre visage et vos yeux pendant le soudage ou pour regarder (voir ANSI Z49.1 et Z87.1 énuméré dans les normes de sécurité).
D Porter des protections approuvés pour les oreilles si le niveau sondre est
trop élevé.
D Utiliser des écrans ou des barrières pour protéger des tiers de l’éclair
et de l’éblouissement; demander aux autres personnes de ne pas regarder l’arc.
D Porter des vêtements de protection constitué dans une matière durable, résistant au feu (cuir ou laine) et une protection des pieds.
LE SOUDAGE peut provoquer un
incendie ou une explosion.
Le soudage effectué sur des conteneurs fermés tels
que des réservoirs, tambours ou des conduites peut
provoquer leur éclatement. Des étincelles peuvent être
projetées de l’arc de soudure. La projection d’étincelles, des pièces chaudes et des équipements chauds peut provoquer des
incendies et des brûlures. Le contact accidentel de l’électrode avec des
objets métalliques peut provoquer des étincelles, une explosion, un
surchauffement ou un incendie. Avant de commencer le soudage, vérifier
et s’assurer que l’endroit ne présente pas de danger.
D Se protéger et d’autres personnes de la projection d’étincelles et de
métal chaud.
D Ne pas souder dans un endroit là où des étincelles peuvent tomber sur
des substances inflammables.
D Déplacer toutes les substances inflammables à une distance de 10,7
m de l’arc de soudage. En cas d’impossibilité les recouvrir soigneusement avec des protections homologués.
D Des étincelles et des matériaux chauds du soudage peuvent facilement passer dans d’autres zones en traversant de petites fissures et
des ouvertures.
D Surveiller tout déclenchement d’incendie et tenir un extincteur à proximité.
D Le soudage effectué sur un plafond, plancher, paroi ou séparation
peut déclencher un incendie de l’autre côté.
D Ne pas effectuer le soudage sur des conteneurs fermés tels que des
réservoirs, tambours, ou conduites, à moins qu’ils n’aient été préparés correctement conformément à AWS F4.1 (voir les normes de
sécurité).
D Brancher le câble sur la pièce le plus près possible de la zone de soudage pour éviter le transport du courant sur une longue distance par
des chemins inconnus éventuels en provoquant des risques d’électrocution et d’incendie.
D Ne pas utiliser le poste de soudage pour dégeler des conduites gelées.
D En cas de non utilisation, enlever la baguette d’électrode du porteélectrode ou couper le fil à la pointe de contact.
D Porter des vêtements de protection dépourvus d’huile tels que des
gants en cuir, une chemise en matériau lourd, des pantalons sans revers, des chaussures hautes et un couvre chef.
D Avant de souder, retirer toute substance combustible de vos poches
telles qu’un allumeur au butane ou des allumettes.
DES PARTICULES VOLANTES
peuvent blesser les yeux.
D Le soudage, l’écaillement, le passage de la pièce
à la brosse en fil de fer, et le meulage génèrent
des étincelles et des particules métalliques volantes. Pendant la période de refroidissement des soudures, elles risquent de projeter du laitier.
D
Porter des lunettes de sécurité avec écrans latéraux ou un écran facial.
OM-1500–2 Page 6
LES ACCUMULATIONS DE GAZ risquent de provoquer des blessures ou
même la mort.
D
D
Fermer l’alimentation du gaz protecteur en cas de
non utilisation.
Veiller toujours à bien aérer les espaces confinés ou se servir d’un respirateur d’adduction d’air homologué.
DES PIÈCES CHAUDES peuvent provoquer des brûlures graves.
D Ne pas toucher des parties chaudes à mains nues
D Prévoir une période de refroidissement avant
d’utiliser le pistolet ou la torche.
LES CHAMPS MAGNÉTIQUES peuvent
affecter les stimulateurs cardiaques.
D
D
Porteurs de stimulateur cardiaque, restez à distance.
Les porteurs d’un stimulateur cardiaque doivent
d’abord consulter leur médecin avant de s’approcher
des opérations de soudage à l’arc, de gougeage ou
de soudage par points.
LE BRUIT peut affecter l’ouïe.
Le bruit des processus et des équipements peut affecter
l’ouïe.
D
Porter des protections approuvés pour les oreilles si
le niveau sondre est trop élevé.
Si des BOUTEILLES sont endommagées, elles pourront exploser.
Des bouteilles de gaz protecteur contiennent du gaz
sous haute pression. Si une bouteille est endommagée, elle peut exploser. Du fait que les bouteilles de gaz
font normalement partie du procédé de soudage, les
manipuler avec précaution.
D Protéger les bouteilles de gaz comprimé d’une chaleur excessive,
des chocs mécaniques, du laitier, des flammes ouvertes, des étincelles et des arcs.
D Placer les bouteilles debout en les fixant dans un support stationnaire ou dans un porte-bouteilles pour les empêcher de tomber ou de
se renverser.
D Tenir les bouteilles éloignées des circuits de soudage ou autres circuits électriques.
D Ne jamais placer une torche de soudage sur une bouteille à gaz.
D Une électrode de soudage ne doit jamais entrer en contact avec une
bouteille.
D Ne jamais souder une bouteille pressurisée – risque d’explosion.
D Utiliser seulement des bouteilles de gaz protecteur, régulateurs,
tuyaux et raccords convenables pour cette application spécifique;
les maintenir ainsi que les éléments associés en bon état.
D Ne pas tenir la tête en face de la sortie en ouvrant la soupape de la
bouteille.
D Maintenir le chapeau de protection sur la soupape, sauf en cas d’utilisation ou de branchement de la bouteille.
D Lire et suivre les instructions concernant les bouteilles de gaz comprimé, les équipements associés et les publications P-1 CGA énumérées dans les normes de sécurité.
1-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement
et la maintenance
Risque D’INCENDIE OU
D’EXPLOSION.
DES ORGANES MOBILES peuvent
provoquer des blessures.
D Ne pas placer l’appareil sur, au-dessus ou à proximité de surfaces infllammables.
D Rester à l’écart des organes mobiles comme le
ventilateur.
D Maintenir fermés et fixement en place les portes,
panneaux, recouvrements et dispositifs de
protection.
D Ne pas installer l’appareil à proximité de produits inflammables
D Ne pas surcharger l’installation électrique – s”assurer que l’alimentation est correctement dimensionné et protégé avant de mettre
l’appareil en service.
LE RAYONNEMENT HAUTE FRÉQUENCE (H.F.) risque de provoquer
des interférences.
LA CHUTE DE L’APPAREIL peut
blesser.
D Utiliser l’anneau de levage uniquement pour soulever l’appareil, NON PAS les chariot, les bouteilles de gaz ou tout autre accessoire.
D Utiliser un engin d’une capacité appropriée pour
soulever l’appareil.
D En utilisant des fourches de levage pour déplacer l’unité, s’assurer
que les fourches sont suffisamment longues pour dépasser du côté
opposé de l’appareil.
L’EMPLOI EXCESSIF peut
SURCHAUFFER L’ÉQUIPEMENT.
D
D
D
D
D
D Prévoir une période de refroidissement, respecter le cycle opératoire nominal.
D Réduire le courant ou le cycle opératoire avant de
recommancer le soudage.
LE SOUDAGE À L’ARC risque de
provoquer des interférences.
D Ne pas obstruer les passages d’air du poste.
LES CHARGES ÉLECTROSTATIQUES peuvent endommager les circuits imprimés.
D Établir la connexion avec la barrette de terre
avant de manipuler des cartes ou des pièces.
D Utiliser des pochettes et des boîtes antistatiques
pour stocker, déplacer ou expédier des cartes de
circuits imprimes.
DES ORGANES MOBILES peuvent
provoquer des blessures.
D Ne pas s’approcher des organes mobiles.
D Ne pas s’approcher des points de coincement
tels que des rouleaux de commande.
LES FILS DE SOUDAGE peuvent provoquer des blessures.
D Ne pas appuyer sur la gachette avant d’en avoir
reçu l’instruction.
D Ne pas diriger le pistolet vers soi, d’autres personnes ou toute pièce mécanique en engageant le fil
de soudage.
D Le rayonnement haute frequence peut provoquer
des interférences avec les équipements de radio–navigation et de communication, les services
de sécurité et les ordinateurs.
Demander seulement à des personnes qualifiées familiarisées
avec des équipements électroniques de faire fonctionner l’installation.
L’utilisateur est tenu de faire corriger rapidement par un électricien
qualifié les interférences résultant de l’installation.
Si le FCC signale des interférences, arrêter immédiatement l’appareil.
Effectuer régulièrement le contrôle et l’entretien de l’installation.
Maintenir soigneusement fermés les portes et les panneaux des
sources de haute fréquence, maintenir les éclateurs à une distance
correcte et utiliser une terre et et un blindage pour réduire les interférences éventuelles.
D
D
D
D
D
D L’énergie électromagnétique risque de provoquer
des interférences pour l’équipement électronique
sensible tel que les ordinateurs et l’équipement
commandé par ordinateur tel que les robots.
Veiller à ce que tout l’équipement de la zone de soudage soit compatible électromagnétiquement.
Pour réduire la possibilité d’interférence, maintenir les câbles de
soudage aussi courts que possible, les grouper, et les poser aussi
bas que possible (ex. par terre).
Veiller à souder à une distance de 100 mètres de tout équipement
électronique sensible.
Veiller à ce que ce poste de soudage soit posé et mis à la terre
conformément à ce mode d’emploi.
En cas d’interférences après avoir pris les mesures précédentes, il
incombe à l’utilisateur de prendre des mesures supplémentaires telles que le déplacement du poste, l’utilisation de câbles blindés, l’utilisation de filtres de ligne ou la pose de protecteurs dans la zone de
travail.
LES CHAMPS MAGNÉTIQUES peuvent
affecter les stimulateurs cardiaques.
D Porteurs de stimulateur cardiaque, restez à distance.
D Les porteurs d’un stimulateur cardiaque doivent
d’abord consulter leur médecin avant de s’approcher des opérations de soudage à l’arc, de gougeage ou de soudage par points.
OM-1500–2 Page 7
1-4. Principales normes de sécurité
Safety in Welding and Cutting, norme ANSI Z49.1, de l’American Welding Society, 550 N.W. Lejeune Rd, Miami FL 33126
Safety and Health Sandards, OSHA 29 CFR 1910, du Superintendent
of Documents, U.S. Government Printing Office, Washington, D.C.
20402.
Recommended Safe Practice for the Preparation for Welding and Cutting of Containers That Have Held Hazardous Substances, norme AWS
F4.1, de l’American Welding Society, 550 N.W. Lejeune Rd, Miami FL
33126
National Electrical Code, NFPA Standard 70, de la National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
de la Compressed Gas Association, 1235 Jefferson Davis Highway,
Suite 501, Arlington, VA 22202.
Règles de sécurité en soudage, coupage et procédés connexes, norme
CSA W117.2, de l’Association canadienne de normalisation, vente de
normes, 178 Rexdale Boulevard, Rexdale (Ontario) Canada M9W 1R3.
Safe Practices For Occupation And Educational Eye And Face Protection, norme ANSI Z87.1, de l’American National Standards Institute,
1430 Broadway, New York, NY 10018.
Cutting and Welding Processes, norme NFPA 51B, de la National Fire
Protection Association, Batterymarch Park, Quincy, MA 02269.
1-5. Information sur les champs électromagnétiques
Données sur le soudage électrique et sur les effets, pour l’organisme,
des champs magnétiques basse fréquence
Afin de réduire les champs électromagnétiques dans l’environnement
de travail, respecter les consignes suivantes :
1
Le courant de soudage, pendant son passage dans les câbles de soudage, causera des champs électromagnétiques. Il y a eu et il y a encore
un certain souci à propos de tels champs. Cependant, après avoir examiné plus de 500 études qui ont été faites pendant une période de
recherche de 17 ans, un comité spécial ruban bleu du National Research Council a conclu: “L’accumulation de preuves, suivant le
jugement du comité, n’a pas démontré que l’exposition aux champs
magnétiques et champs électriques à haute fréquence représente un
risque à la santé humaine”. Toutefois, des études sont toujours en cours
et les preuves continuent à être examinées. En attendant que les conclusions finales de la recherche soient établies, il vous serait
souhaitable de réduire votre exposition aux champs électromagnétiques pendant le soudage ou le coupage.
OM-1500–2 Page 8
2
3
4
5
Garder les câbles ensembles en les torsadant ou en les
attachant avec du ruban adhésif.
Mettre tous les câbles du côté opposé de l’opérateur.
Ne pas courber pas et ne pas entourer pas les câbles autour de
votre corps.
Garder le poste de soudage et les câbles le plus loin possible de
vous.
Relier la pince de masse le plus près possible de la zone de
soudure.
Consignes relatives aux stimulateurs cardiaques :
Les personnes qui portent un stimulateur cardiaque doivent avant tout
consulter leur docteur. Si vous êtes déclaré apte par votre docteur, il est
alors recommandé de respecter les consignes ci–dessus.
SECTION 2 – INTRODUCTION
2-1. Specifications
Type of Input
Power
24 Volts AC
Single-Phase
10 Amperes
50/60 Hertz
Welding Power
Source Type
Wire Feed Speed
Range
Standard: 50 To 780 ipm
(1.3 To 19.8 mpm)
Constant Voltage (CV)
DC With 14-Pin And
Contactor Control
Optional High Speed: 92
To 1435 ipm (2.3 To 36.5
mpm)
Wire Diameter
Range
Welding Circuit
Rating
.023 To 1/8 in (0.6
To 3.2 mm)
100 Volts,
750 Amperes, 100%
Duty Cycle
Max Spool Weight:
60 lb (27 kg)
Weight
12 ft (3.7 m):
160 lb (73 kg)
16 ft (4.9 m):
210 lb (95 kg)
12 ft (3.7 m) Boom
16 ft (4.9 m) Boom
Maximum Height With 4 ft (1.2 m) Post
17 ft (5.2 m)
21 ft (6.4 m)
Vertical Lift Of Boom
Horizontal to 60° Above Horizontal
Horizontal to 60° Above Horizontal
SECTION 3 – INSTALLATION
3-1. Installing Swivel Into Pipe Post
5
4
1
2
3
Swingpak Base or CBC Cart
Pipe Post With Base
Steel Bolt
Secure as shown using as a minimum 1/2 in diameter SAE grade 5
steel bolts.
4
Swivel Assembly
Insert into pipe post. Lubricate
swivel.
5
2
3
Safety Collar
Y Do
not
remove
instructed to.
until
1
Tools Needed:
3/4 in
ST-152 268-B
OM-1500–2 Page 9
3-2. Adjusting Control Tilt Bracket
1
2
3
Tilt Bracket
Rear Pivot Screw
Front Screw
Loosen rear pivot screw. Remove
front screw. Pivot control downward to desired viewing angle. Replace and tighten front screw. Tighten pivot screw.
1
2
3
802 862
3-3. Installing Boom And Reel Support
1
2
Swivel Plates
Yoke
Remove hardware from swivel
plates and yoke.
3
3
Boom
Set boom into swivel as shown.
7
4
Yoke Pin
Install pin through yoke. Install cotter pin and spread ends.
4
5
5
Install bolt, tighten hardware, and
back bolt off one half turn.
2
6
6
Bolt
Locking Knob
Install locking knob but do not
tighten.
7
Reel Support
Install reel support.
1
Tools Needed:
3/8, 3/4 in
ST-142 596-C
OM-1500–2 Page 10
3-4. Installing Wire Guide Extension
1
2
3
4
1
4
2
Wire Guide Fitting
Bolt
Monocoil Liner
Wire Guide Extension
Tighten bolt to secure liner in wire
guide fitting. Do not overtighten bolt
and crush liner.
3
Tools Needed:
3/8 in
ST-152 323
3-5. Equipment Connection Diagram
1
2
3
1
12
2
3
11
4
Welding Power Source
Remote 14 Connection
Positive (+) Weld Output
Cable
4 Negative (–) Weld Output
Cable
5 Workpiece
6 Weld Control
7 Boom
8 Gun
9 Swivel
10 Pipe Post And Base
11 Gas Hose
12 Gas Supply
5
6
7
9
10
8
802 863
OM-1500–2 Page 11
3-6. Control Box Connections
1
2
3
Interconnecting Cable
Receptacle
Interconnecting Cable
14-Pin Cord
2
3
1
Ref. 802 864
3-7. 14-Pin Plug Information
Pin*
A
24 volts ac with respect to socket G.
B
Contact closure to A completes 24 volts ac contactor control circuit.
A
G
Circuit common for 24 volts AC circuit.
B
L C
M D
E
C
+10 volts dc output to remote control with respect to socket D.
D
Remote control circuit common.
E
0 to +10 volts dc input command signal from remote control with respect to socket D.
H
Voltage feedback; 0 to +10 volts dc, 1 volt per 10 arc volts.
F
Current feedback; 0 to +10 volts dc, 1 volt per 100 amperes.
J
I
H
K
N
G
F
Pin Information
*The remaining pins are not used.
OM-1500–2 Page 12
3-8. Removing Safety Collar And Adjusting Boom
1
Locking Knob
Tighten knob to prevent boom
movement. Loosen knob to allow
boom movement. Change knob position to limit upward movement.
4
Pull boom down slightly and remove
safety collar. Boom should balance
in any position from horizontal to 60
degrees above horizontal. If necessary, adjust boom as follows:
3
2
3
Threaded Rod
Jam Nut
Loosen jam nut and turn threaded
rod until boom balances. Tighten
jam nut. Be sure several full threads
are through yoke to prevent boom
falling.
4 Yoke
2
Rod
1
Rod
4
Retain safety collar for use in disassembling or moving boom.
3
2
Increasing Spring
Pressure For A
Heavy Gun
Decreasing Spring
Pressure For A
Light Gun
Tools Needed:
1-1/8 in
Ref. ST-152 380-A
3-9. Gun Recommendation Table
Process
Gun
GMAW – Hard or Cored Wires
M25, M40, GA-50C, GW-500, Or GW-600
FCAW – Self-Shielding Wires
GA-40GL Or GA-50GL
3-10. Wire Type, Size, And Feed Speed Capability Table
Motor Speed
Wire Type
Wire Size
Feed Speed Capability
Standard
All
.023 To 5/64 in (0.6 To 2 mm)
50 To 780 ipm (1.3 To 19.8 mpm)
Standard
All
3/32 To 7/64 in (2.4 To 2.8 mm)
50 To 700 ipm (1.3 To 17.8 mpm)
Standard
All
1/8 in (3.2 mm)
50 To 300 ipm (1.3 To 7.6 mpm)
Optional High
Speed
All
.023 To 5/64 in (0.6 To 2 mm)
92 To 1440 ipm (2.3 To 35.6 mpm)
OM-1500–2 Page 13
3-11. Installing And Threading Welding Wire
Tools Needed:
15/16, 3/8 in
3/16, 5/64 in
Install wire spool. Adjust tension nut so
wire is taut when wire
feed stops.
Pressure
Indicator
Scale
Install wire guide.
Pressure
Adjust
Install drive rolls.
NONCONDUCTIVE
SURFACE
No Wire Slip
NONCONDUCTIVE
SURFACE
Wire Slips
. Be sure that outlet cable has proper size . For soft wire or small diameter stainless
liner for the welding wire size. When
installing gun, position liner extending
from outlet wire guide as close as possible to drive rolls without touching.
Install gun. Lay gun cable out straight. Cut off
end of wire. Push wire through guides up to
drive rolls; continue to hold wire. Press Jog
button to feed wire out gun.
steel wire, use 2 drive rolls and set drive
roll pressure from 0 to a maximum of 4
on the pressure indicator scale (so that
only the inner spring is compressed).
This setting will generally give the best
performance for these types of wires.
To adjust drive roll pressure, hold nozzle
about 2 in (51 mm) from nonconductive
surface and press gun trigger to feed wire
against surface. Tighten knob so wire does
not slip. Do not overtighten. If contact tip is
completely blocked, wire should slip at the
feeder (see pressure adjustment above).
Cut wire off. Close cover.
Repeat for other side.
152 648-A / 802 865 / 142 597-A / Ref. 137 391-A / Ref. S-0627-A
OM-1500–2 Page 14
3-12. Setting Internal DIP Switches
1
O 1
N
2
3
4
5
6
7
8
. In the DIP switch S1 illustrations,
the elevated slider on each switch
is show in white. For example, the
switches above are all in the Off
position.
2
Ref. 802 866
Position Settings And Results For DIP Switch S1
2
1
1
3
2
Off = Front panel display
shows wire feed speed
during welding.
5
3
6
Off = Front panel display
returns to preset upon trigger release.
On = Current detect override. For welding power
sources that don’t provide
current feedback through
the 14-pin receptacle.
Off = Current must be detected to go from run-in to
welding condition.
4
4
3 On, 4 Off = Range limit
on voltage and wire feed
speed set at ±5%.
3
4
3 Off, 4 On = Range limit
on voltage and wire feed
speed set at ±10%.
7
6
3
3 Off, 4 Off = Range limiting disabled (locks Off).
Off = Front panel display
shows wire feed speed in
inches per minute.
On = Front panel display
holds weld parameters
for 5 seconds following
trigger release.
5
4
On = Front panel display
shows wire feed speed in
meters per minute.
On = Front panel display
shows weld amperage
during welding.
8
3 On, 4 On = Range limit
on voltage and wire feed
speed set at ±20%.
7
8
7 Off, 8 Off = Normal
speed motor (50–780
inches per minute)
7
8
7 On, 8 Off = Reserved
for future use.
7
7 Off, 8 On = High speed
motor (90–1440 inches
per minute)
8
7 On, 8 On = Reserved
for future use.
. When DIP switch positions are changed, the unit must be
turned Off and then On again in order for the new settings
to be active. DIP switches are only read on power up.
1
2
DIP Switch S1
DIP Switch S4 (Not For Customer Use)
DIP switch S1 allows the user to make a number of choices affecting unit operation.
w Selecting Weld Amperage Or Wire Feed
Speed Display (S1-1)
If the front panel DIP is set in the display amps
position, the lower display (see Section 4-6)
shows amperage while the unit is welding at
an amperage value above 25 Amps and the
current detect override is in the Off position. If
the amperage display position is not used, the
lower display shows wire speed.
w Selecting Wire Feed Speed Value (S1-2)
The unit displays wire speed in units of inches
per minute (IPM) if the English/Metric wire
feed display DIP is in the English position. The
unit displays wire speed in meters per minute
(MPM) if the DIP is in the metric position.
w Adjusting Range Limits (S1-3 & 4)
The lock feature provides a means of regulating unit settings, but still allows some level of
adjustment through the Adjust control. When
a lock position is used, the lock applies to all
programs. Two DIP switches are dedicated to
locking unit settings. Four possible combinations of the two DIP switches provide the following settings: Locks Off, Locks On ±5%,
Locks On ±10%, and finally Locks On ±20%.
If the wire speed is at 300 IPM when the lock
DIP is activated, and the lock range is set at
±10%, the operator would have an adjustment
range from 270 to 330 IPM.
Trigger Hold and Dual Schedule function normally when locks are enabled.
w Setting Display Hold Feature (S1-5)
If the display hold DIP is in the “Hold On” position, the unit will hold the last weld information
for 5 seconds following weld termination. If
any front panel push button is pressed, or if the
Adjust control is activated, the display hold
feature is terminated.
w Setting Current Detect Override (S1-6)
Current detect override is used to disable runin when a welding power source is used that
doesn’t provide current feedback through the
14-pin receptacle.
w Defining Motor Speed (S1-7 & 8)
Switches 7 and 8 allow the user to define
whether the motor in use is normal speed
(50–780 inches per minute) or high speed
(90–1440 inches per minute).
OM-1500–2 Page 15
SECTION 4 – OPERATION
4-1. Operational Terms
The following is a list of terms and their definitions as they apply to this wire feeder:
General Terms:
Cold Wire Jog
Feeding wire without contactor or gas valve being energized.
Sequence
A portion of the weld program, such as preflow, run-in, start, weld, crater, burnback, and postflow.
Weld Program
A group of sequences that make up a weld cycle.
4-2. Power Switch
1
1
Power Switch
802 809
OM-1500–2 Page 16
4-3. Front Panel Controls
See
Section
4-5
See
Section
4-4
Program
Volts
See
Section
4-6
Time (sec)
Wire Speed
Amps
Start
Trigger Hold
Dual Schedule
Crater
Pre/Postflow
Sequence
See
Section
4-9
Setup
Adjust
See
Section
4-8
See
Section
4-7
4-4. Program Push Button
1
Program Display
The number of the active program
is displayed.
2
1
3
Program
2
Program Push Button
Press button to activate program
select feature. To change the program number, press the Program
push button and rotate the Adjust
control.
3
Program Push Button LED
The LED lights to indicate the Program push button is active.
OM-1500–2 Page 17
4-5. Upper Display
3
1
2
4
Volts
Time (sec)
5
1
Upper Display
5
The upper display shows voltage or time.
The unit displays both preset and actual arc
voltage. When the unit is in a welding state,
actual arc voltage is displayed. The upper
display shows welding sequence time when
the Time LED is illuminated.
2
Upper Display Push Button
Press button to choose between voltage or
time functions.
3
Upper Display Push Button LED
The upper display push button LED illuminates to indicate that information displayed
can be changed by the Adjust control.
4
Volts LED
Time LED
The LEDs below the display illuminate to indicate which value is being shown.
At any time while welding, the unit permits
the adjustment of the weld sequence voltage
and overrides the display of actual arc voltage. If the current detect override is in the On
position, the unit displays preset voltage
while welding instead of actual arc voltage.
Preset voltage is defined as the desired arc
voltage commanded to the welding power
source.
If the unit is displaying a welding sequence
that can be timed, the welding time display
mode is entered by pressing the upper display push button repeatedly until welding
time is the active parameter in the upper display. At idle, the upper display toggles between showing weld voltage or weld time,
with subsequent presses of the upper display push button.
The unit defaults to displaying welding voltage when a welding sequence display mode
is first entered. When the unit is in a welding
state, the welding time display mode is terminated in place of the voltage display
mode.
If the weld sequence has a time set (as in
spot time), after the weld program is completed, ERR TRIG will be displayed to indicate the weld program is complete. Release
trigger to clear error.
4-6. Lower Display
3
1
2
4
Wire Speed
Amps
5
1 Lower Display
The lower display shows wire speed or
amperage. The unit displays and adjusts
only preset wire speed at idle. When the unit
is in a welding state, actual wire speed is displayed for the active welding sequence. If the
amps display DIP is set in the display amps
position (see Section 3-12), the lower display shows amperage while the unit is welding.
2 Lower Display Push Button
Press button to choose between wire speed
or amperage functions.
3 Lower Display Push Button LED
The lower display push button LED illumi-
OM-1500–2 Page 18
nates to indicate that information displayed
can be changed by the Adjust control.
4
Wire Speed LED
5
Amps LED
The LEDs below the display illuminate to indicate which value is being shown.
If the unit is in a welding state that does not
involve feeding wire, the unit displays the
weld sequence wire speed. At any time during welding, the weld sequence wire speed
can be adjusted and overrides the preset
wire speed display. In other words, if the Adjust control is activated while welding, the
unit displays and permits adjustment of the
weld sequence wire feed speed regardless
of the active welding sequence.
When the unit is displaying amperage, the
Amps LED illuminates. Amperage is only
displayed if the unit is in a welding state and
the amperage is above a minimum value of
25 Amps.
The display will read zero for amperage
readings below the amperage threshold,
prior to arc initiation. In addition, the amperage display feature is disabled if the current
detect override is in the On position (see
Section 3-12).
4-7. Setup Push Button
3
4
Trigger Hold
Dual Schedule
2
1
Setup
1
Setup Push Button
Press button to choose between trigger hold
or dual schedule functions.
2
Setup Push Button LED
3
Trigger Hold LED
4
Dual Schedule LED
• When the Setup button is pressed, the Setup push button LED illuminates and the Trigger Hold LED flashes.
• The flashing LED indicates that the unit is in
the trigger hold display mode. In this mode
the upper display indicates HOLD and the
lower display indicates the trigger hold sta-
tus On/Off. Use the Adjust control to change
the trigger hold status or press the lower display push button. If trigger hold is turned On,
the trigger hold LED illuminates and stays
On.
• When the Setup button is pressed a second
time, the dual schedule LED flashes. In this
mode the upper display indicates DUAL and
the lower display indicates dual schedule
status On/Off. Use the Adjust control to
change the dual schedule status if desired.
When trigger hold is On, the user must press
and hold the trigger for a predefined amount of
time (the trigger hold delay time– see Section
4-10), then release it for the trigger hold function to be active. To shut off the weld when trigger hold is On, the user must press and release the trigger.
• Pressing the Setup button again exits the
Setup mode. The dual schedule LED stops
flashing to indicate the dual schedule status
is Off.
If a weld time is programmed, trigger hold is
disabled.
• While in the Setup mode, the active program
can be adjusted without deactivating the
trigger hold Setup mode operation. If the
trigger is activated, Setup mode(s) is terminated.
4-8. Adjust Control
1
Adjust Control
The Adjust control is used to
change various sequence parameters, and to select various sequences. Refer to the section for
the function in question for information related to using the Adjust control.
1
Adjust
OM-1500–2 Page 19
4-9. Sequence Push Button
3
Start
Time
Weld
Time
Start
Crater
Pre/Postflow
Crater
Time
Preflow
Time
2
1
Postflow
Time
Welding Sequence Diagram
Sequence
1
Sequence Push Button
the weld display mode is activated.
2
Sequence Push Button LED
3
Welding Sequence LEDs
If zero time is programmed for a timed sequence except for Weld, that sequence will
be skipped.
The Sequence push button allows the selection of welding sequences. Five welding sequences are available. The default sequence
is the Weld sequence. The Weld sequence is
active on power up, and is indicated when no
welding sequence LEDs are illuminated.
Three welding sequence LEDs are located
above the Sequence push button: Start, Crater, and Preflow/Postflow. The applicable LED
illuminates to indicate which welding sequence is active.
• The LED illuminates to indicate that a welding sequence display mode other than Weld
is activate. Welding sequences other than
Weld must be set prior to initiating the arc.
When the unit enters a welding state, all sequence display modes are terminated and
OM-1500–2 Page 20
• In the weld sequence display mode the Sequence push button LED is Off , and all other
sequence LEDs are Off. When the Sequence push button is pressed, the Sequence push button and the Start LEDs illuminate. In this condition, the unit is in the
Start sequence display mode, and Start sequence parameters are shown in the displays.
• When the Sequence push button is pressed
a second time, the Start sequence LED
goes Off and the Crater sequence LED illuminates. The Sequence push button LED
remains illuminated. In this condition, the
unit is in the Crater sequence display mode,
and Crater sequence parameters are
shown in the displays.
• When the Sequence push button is pressed
a third time, the Crater sequence LED goes
Off and the Preflow/Postflow sequence
LED illuminates. The Sequence push button LED remains illuminated. In the Preflow
display mode the upper display shows the
preflow time and the lower display indicates
the abbreviation PRE, to inform the operator
that preflow time is displayed. If the upper
display push button is pressed, the Adjust
control can be used to adjust preflow.
If the lower display push button is pressed, the
Adjust control can be used to select between
preflow PRE and postflow POST. When
POST is selected, the upper display can be
used to specify postflow time.
• When the Sequence push button is pressed
a fourth time, all sequence LEDs and the
Sequence push button LED go off and the
unit returns to the welding sequence display
mode.
4-10. Auxiliary Menus
4
5
1
2
7
Program
Volts
Time (sec)
Wire Speed
Amps
6
Start
Trigger Hold
Crater
Pre/Postflow
Dual Schedule
9
3
Sequence
Adjust
Setup
8
1
2
3
4
5
6
7
8
9
Program Display
Program Push Button
Sequence Push Button
Upper Display
Upper Display Push Button
Lower Display
Lower Display Push Button
Adjust Control
Setup Push Button
Auxiliary Menu
• An auxiliary menu is provided if both the Sequence and Setup push buttons are
pressed simultaneously. The Setup push
button LED flashes when the auxiliary menu
is displayed.
. The auxiliary menu may be exited at any
time by pressing both the Sequence push
button and the Setup push buttons simultaneously.
• If the Setup push button is pressed, the unit
allows burnback time to be set.
Burnback time and voltage can be specified
when the lower display indicates “BURN” and
the upper display indicates the burnback time
or voltage. The Adjust control is used to set the
desired burnback time or voltage. Burnback
settings, like run-in settings, are program specific. The active program is displayed in the
Program display and can be adjusted (see
Section 4-4).
• If the Setup push button is pressed, the unit
allows the setting of the manual override
power source min and max voltage preset
range. The minimum voltage is displayed in
the upper display and the lower display indicates “VMIN”. When the Setup push button
is pressed the unit displays the maximum
voltage setting of the welding power source.
The maximum voltage is displayed in the
upper display and the lower display indicates “VMAX”.
• The Setup push button is used to step
through menu selections. The Manual override run-in wire speed selection is indicated
by the upper display of “RUNI”, and the lower display indicates the run-in wire speed
setting of the active program. The Adjust
control is used to set the desired run-in wire
speed.
In both cases, the Adjust control is used to
specify the minimum and maximum voltage
settings of the welding power source. The settings correspond to arc voltage obtained at
minimum command and arc voltage obtained
at maximum command.
The lower display shows “AUTO” to indicate
that automatic run-in is active. The Adjust control can be used to change the setting from
“AUTO” to a run-in wire speed setting
(50–780). The active program is displayed in
the Program display. The active program can
be changed by pressing the Program push
button, then selecting the desired program
with the Adjust control.
Arc time is indicated by the Program display
showing “HR”. Arc time is shown in the lower
display.
Run-in settings are program specific. For example, program 1 can be set at 50 IPM run-in,
and program 2 can remain on the Automatic
setting. When the unit is set for Automatic,
run-in wire speed is set automatically to oneĆ
half weld sequence wire speed.
• If the Setup push button is pressed, the unit
allows trigger hold delay time to be set.
• If the Setup push button is pressed, the unit
displays arc time in hours.
• If the Setup push button is pressed, the unit
displays the number of cycles.
Arc cycles are indicated by the Program display showing “CL”. The arc cycle count is
shown in the lower display.
Trigger hold delay time is indicated by ”HOLD”
in the lower display and the hold delay time in
the upper display. The adjust control can be
used to specify a new delay time for trigger
hold. Trigger hold delay time is the minimum
amount of time the trigger must be held for trigger hold to work when the trigger is released
(the trigger hold function must be on). For example, if a trigger hold delay time of 2.0 seconds is defined, the operator must hold the
trigger for at least 2 seconds before releasing
it in order for the trigger hold function to work.
Once the trigger hold function is in effect, the
wire feeder will stay On until the trigger is
pressed and released again.
There is an additional function built in called
”maximum trigger hold time” which is the maximum length of time the trigger can be held and
the trigger hold function still work when the
trigger is released (the trigger hold function
must be on). The maximum trigger hold time
is set at 4.0 seconds after the trigger hold
delay time. For example, if a trigger hold delay
time of 2.0 seconds is defined, and the operator held the trigger in for more than 6.0 seconds, the trigger hold function would not be in
effect and the wire feeder would stop when the
trigger is released.
• When the Setup push button is pressed
again, the menu repeats to the first menu
selection of run-in wire speed selection.
Reset Menu
A reset menu is displayed if the following four
push buttons are pressed simultaneously:
Program, Sequence, upper display, and Setup. The upper display indicates “WIPE” and
the lower display prompts the operator with
the word “ON” or “OFF”. The lower push button is active indicating that the Adjust control
can be used to change the unit to “WIPE ON”.
When “WIPE ON” is set, if the original four
push buttons are simultaneously pressed a
second time, the unit will reset all settings to
factory default except the arc time and arc
cycle counts. If a reset is not desired, set the
display to “WIPE OFF” and simultaneously
press the Program, Sequence, upper display,
and Setup push buttons to exit the reset menu.
OM-1500–2 Page 21
4-11. Jog/Purge
2
1
Ref. 802 866
1
Jog/Purge Push Button
2
Adjust Control
The unit provides the ability to jog the wire
feeder by means of the gun trigger or the Jog/
Purge switch. If the welding arc does not initiate in 3 seconds after the gun trigger is activated, the unit will perform a jog operation for
a maximum of two minutes. If the gun trigger
OM-1500–2 Page 22
is still activated after two minutes, the jog operation is terminated to prevent complete despooling of the wire, in the case of a damaged
gun. This function is not available if current detect override is enabled (DIP switch S1-6 is in
On position).
Jog speed can be adjusted by the Adjust control when the unit is jogging wire. The unit displays jog speed when the unit is being jogged.
The unit displays the “ERR TRIG“ message to
inform the operator that the trigger is activated.
Pressing the Jog/Purge button also allows the
operator to purge gas lines before welding and
to preset gas pressure at the regulator.
Jogging can also be accomplished by pressing the Jog/Purge button.
SECTION 5 – SETTING SEQUENCE PARAMETERS
5-1. Sequence Parameters In A Program
If time is set to zero in Weld
sequence, welding continues until
gun trigger is released.
Sequence
If time is set to zero in any timed
sequence except Weld, the
sequence is skipped.
Parameters
Volts
IPM
1. Preflow
Seconds
0-9.9
2. Run-In
X
3. Start
X
X
0.00-5.00
4. Weld
X
X
0-100.0
5. Crater
X
X
0-5.00
6. Burnback
X
0-0.25
7. Postflow
0-9.9
X = Setting available.
Weld Time
Crater
Time
Preflow
Time
Burnback
Time
Start
Time
Postflow
Time
Time
Burnback
Preflow
Trigger
Pressed
Run-In Start
Weld
Crater
Postflow Sequence
End
Trigger
Released
OM-1500–2 Page 23
SECTION 6 – SETTING DUAL SCHEDULE PARAMETERS
6-1. Optional Dual Schedule Switch Diagrams
1
1
1
DSS-9
2
2
1
DSS-8
2
2
Maint 2P (Maintained-Contact
2-Pole Switch)
Maint 1P (Maintained-Contact
1-Pole Switch)
1
2
TR
3
B
A
3
A
4
B
4
SECTION 7 – MAINTENANCE
7-1. Routine Maintenance
Y Disconnect power before maintaining.
3 Months
Clean and
tighten
weld
terminals.
Replace
unreadable
labels.
Replace
cracked
parts.
Check
14-pin cord.
Repair or
replace
cracked
weld
cable.
Check gas
hose and
fittings.
Check gun
cable.
6 Months
Blow out or vacuum
inside. During heavy
service, clean
monthly.
OM-1500–2 Page 24
Or
Clean
drive rolls.
7-2. Diagnostics
3
2
1
Front panel is shown removed for purpose of
illustration only. In actual use, front panel
would be in place.
Ref. 802 687
. There is a two-position DIP switch S1 located on motor control
The following error messages are shown on the
upper and lower displays to indicate specific errors.
Explanations are in the text below:
ERR
ERR
ERR
ERR
ERR
ERR
COMM
TRIG
TACH
MTR
GAS
COOL
Indicates a
communication
error.
Indicates a trigger
error.
LED3-Related Error Indications
1
2
3
board PC1. These switches are factory-set in the Off position and
must remain in that position for the unit to operate correctly.
Wrapper
Motor Control Board PC1
LED3
Error conditions are indicated by LED3 on
PC1. To view LED3, turn Off unit, remove
wrapper, and turn unit On. LED3 is most easily
observed from the left side of the unit.
The LED blinks in a 2.5 second cycle. The
number of blinks in this period indicates the
type of error.
The priority of the errors is related to the number of blinks indicating the error. The more
blinks, the more severe the error (motor error
is top priority). A higher priority error overrides
a lower one (if a motor error and a communication error existed, the light would blink four
times for the motor error).
Since blink On time and blink Off time are
Indicates a
tachometer error.
Indicates a motor
error.
equal in a four-blink cycle, the four–blink sequence appears as a constant blink.
1 blink = Communication Error
2 blinks = Trigger Error
3 blinks = Tach Error
4 blinks = Motor Error
• The communication error occurs 2.5 seconds after a loss of communication between
the motor and front panel boards. The user
may continue to weld with this error. The error may be cleared by resetting the unit (see
Section 4-10).
• The trigger error occurs if the user has the
trigger held for more than two minutes without striking an arc (providing current override is not enabled), or if the user holds the
trigger past the postflow phase in a timed
weld. This error also occurs if the trigger is
held when the feeder is powered up. The error may be cleared by releasing the trigger.
No gas flow
detected.
No coolant flow
detected.
• The tach error occurs 2 seconds after the
loss of tachometer feedback. The user may
continue to weld with this error. The motor
speed is regulated through the monitoring of
voltage and current.
• The motor error indicates that the motor
has been drawing too much current for too
long. To remedy this, reduce the wire feed
speed or the wire feeder torque load/duty
cycle.
Additional Error Messages (Additional
hardware required for these to be
functional)
Gas flow error: indicates no gas flow is detected. Connect a gas supply or remedy the
problems not allowing gas to flow.
Coolant flow error: indicates no coolant flow is
detected. Connect a coolant system or remedy the problems not allowing coolant to flow.
OM-1500–2 Page 25
7-3. Troubleshooting
Y Disconnect power before troubleshooting
Trouble
Wire feeds, shielding gas flows, but
electrode wire is not energized.
Remedy
Check interconnecting cord connections. If secure, check cord for continuity and repair or replace
(see Sections 3-5 and 3-6).
Wire feeder is on, display does not light Check and reset circuit breaker at welding power source.
up, motor does not run, gas valve and
welding power source contactor do not
pull in.
Electrode wire feeding stops or feeds
erratically during welding.
Check gun trigger connection. See gun Owner’s Manual.
Check gun trigger. See gun Owner’s Manual.
Readjust hub tension and drive roll pressure (see Section 3-11).
Change to correct size drive roll (see Table 9-1).
Clean or replace dirty or worn drive roll.
Incorrect size or worn wire guides.
Replace contact tip or liner. See gun Owner’s Manual.
Remove weld spatter or foreign matter from around nozzle opening.
Have Factory Authorized Service Agency check drive motor or motor control board PC1.
Motor runs slowly.
Check for correct input voltage.
Unit does not switch out of Run-In
Speed.
Check if a power source is being used that doesn’t provide current feedback through the 14-pin receptacle. If this is the case, use internal DIP switches to set current detect override to On (see
Section 3-12).
Wire feeder power is on, displays light
up, but unit is inoperative.
Check welding gun trigger leads for continuity, and repair leads or replace gun.
OM-1500–2 Page 26
SECTION 8 – ELECTRICAL DIAGRAM
200 592-B
Figure 8-1. Circuit Diagram
OM-1500-2 Page 27
SECTION 9 – PARTS LIST
. Hardware is common and
11
10
9
Fig 9-5
7
6
8
27
31
Figure 9-1. Main Assembly
OM-1500–2 Page 28
28
29
30
18
32
Fig 9-4
26
25
24
20
19
23
22
21
Fig 9-2
1
18
14
2
15
16
17
Fig 9-3
13
12
2
7
3
5
4
not available unless listed.
ST-142 600-L
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Model
16
12
Figure 9-1. Main Assembly
. . . 1 . . . . . . . . . . . . See Note
. . . 2 . . . . . . . . . . . . . 201 319
. . . 2 . . . . . . . . . . . . . 201 320
. . . . . . PLG37,38 . . 047 636
. . . . . . . . . . . . . . . . . . . 079 739
. . . . . . . . . . . . . . . . . . . 163 520
. . . 3 . . . . . . . . . . . . . 139 600
. . . 3 . . . . . . . . . . . . . 139 599
. . . 4 . . . . . . . . . . . . . 600 324
. . . 5 . . . . . . . . . . . . . 149 884
. . . 5 . . . . . . . . . . . . . 080 947
. . . 6 . . . . . . . . . . . . . 132 053
. . . 7 . . . . . . . . . . . . . 602 243
. . . 8 . . . . . . . . . . . . . 602 213
. . . 9 . . . . . . . . . . . . . 601 872
. . . 10 . . . . . . . . . . . . . . Fig 7-6
. . . 11 . . . . . . . . . . . . ♦149 838
. . . 11 . . . . . . . . . . . . ♦149 839
. . . 11 . . . . . . . . . . . . ♦078 264
. . . 11 . . . . . . . . . . . . ♦079 216
. . . 12 . . . . . . . . . . . . ♦075 078
. . . 12 . . . . . . . . . . . . ♦079 217
. . . 13 . . . . . . . . . . . . . . Fig 7-4
. . . 14 . . RC37 . . . . 047 637
. . . 15 . . PLG46 . . . . 115 090
. . . 16 . . PLG44 . . . 167 640
. . . 17 . . PLG4 . . . . 136 810
. . . 18 . . . . . . . . . . . . . 203 314
. . . . . . . . RC13 . . . . 080 328
. . . . . . . . . . . . . . . . . . . 079 531
. . . . . . . . . . . . . . . . . . . 604 571
. . . . . . . . PLG6 . . . . . 115 094
. . . 19 . . PLG5 . . . . 131 204
. . . 20 . . PLG45 . . . 131 203
. . . 21 . . . . . . . . . . . . . 605 227
. . . 22 . . . GS1 . . . . . 200 333
. . . . . . . . . . . . . . . . . . . 134 834
. . . 23 . . . . . . . . . . . . . 139 265
. . . 24 . . . . . . . . . . . . . 156 243
. . . 25 . . . . . . . . . . . . . 159 360
. . . 26 . . . . . . . . . . . . . 145 639
. . . 27 . . . . . . . . . . . . . 201 773
. . . 27 . . . . . . . . . . . . ♦201 774
. . . 28 . . . . . . . . . . . . . 157 295
. . . 29 . . . . . . . . . . . . . 604 612
. . . 30 . . . . . . . . . . . . . 082 050
. . . 31 . . . . . . . . . . . . . 159 646
. . . 32 . . . . . . . . . . . . . 159 647
. . CONTROL BOX, (Fig 9-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CABLE, interconnecting (consisting of) . . . . . . . . . . . . . . . . . . . . . . 1
. . CABLE, interconnecting (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . CONNECTOR & PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . . 2
. . . . CONNECTOR, circ clamp str rlf sz 17.20 . . . . . . . . . . . . . . . . . . 2 . . . . 2
. . . . CABLE, port No. 18-14 11/c (order by ft) . . . . . . . . . . . . . . . . . . 17ft . . 21ft
. . HOSE, gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . HOSE, gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . CABLE, weld cop strd No. 4/0 (order by ft) . . . . . . . . . . . . . . . . . . 26ft . . 30ft
. . BRACKET, spring retaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . BRACKET, spring retaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . SCREW, cap stl hexhd .375-16 x 1.500 lg . . . . . . . . . . . . . . . . . . . 4 . . . . 4
. . WASHER, flat stl std .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 . . . . 8
. . WASHER, lock stl split .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . 4
. . NUT, stl hex full .375-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . 4
. . SUPPORT, hub & reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . PIPE POST, 4ft w/base or . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . PIPE POST, 6ft w/base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . PIPE POST, 4ft w/base or . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . PIPE POST, 6ft w/base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . PIPE POST, 4ft w/o base or . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . PIPE POST, 6ft w/o base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CONNECTOR & SOCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CONNECTOR & PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CONNECTOR & PINS & SOCKETS . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CONNECTOR & SOCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CABLE, trigger (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . CONNECTOR w/SOCKETS, free hanging . . . . . . . . . . . . . . . . . 1 . . . . 1
. . . . CONNECTOR, circ clamp str rlf size 11 Amp 206358-2 . . . . . . 2 . . . . 2
. . . . CABLE, 18/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2ft . . . . 2ft
. . . . CONNECTOR & SOCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CONNECTOR & SOCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CONNECTOR & SOCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . NUT, nyl hex jam .750NPST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . VALVE, 34VDC
. . HOSE, SAE .187 ID x .410 OD (order by ft) . . . . . . . . . . . . . . . . . . 2ft . . . . 2ft
. . COVER, motor & components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CLAMP, motor top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . INSULATOR, screw machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . 4
. . STRIP, buna N compressed sheet .062 x 4.000sq . . . . . . . . . . . . 1 . . . . 1
. . DRIVE ASSEMBLY, wire (w/tach) (Fig 9-5) . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . DRIVE ASSEMBLY, wire (high speed w/tach) (Fig 9-5) . . . . . . . . 1 . . . . 1
. . GUIDE, monocoil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . SCREW, set stl sch 8-32 x .125 cup point . . . . . . . . . . . . . . . . . . . 2 . . . . 2
. . LINER, monocoil inlet wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . CLAMP, motor base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
. . INSULATOR, motor clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1
Note: When ordering Control Box contact factory service department for proper number.
♦OPTIONAL
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-1500–2 Page 29
. Hardware is common and
1
not available unless listed.
4
3
2
5
8
7
6
9
23
22
18
19
13
12
11
10
20
16
8
21
14
12
13
15
17
16
802 870
Figure 9-2. Control Box
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 9-2. Control Box (Figure 9-1 Item 1)
... 1 ...............
... 2 ...............
... 3 ...............
... 4 ...............
... 5 ...............
... 6 ...............
... 7 ...............
... 8 ...............
... 9 ...............
.....................
. . . 10 . . . PLG12 . . . .
. . . . . . . . . PLG52 . . . .
. . . . . . . . . . PLG3 . . . . .
. . . 11 . . . . . . . . . . . . . . .
. . . 12 . . . . . . . . . . . . . . .
. . . 13 . . . . . . . . . . . . . . .
. . . 14 . . . . . . . . . . . . . . .
OM-1500–2 Page 30
200 562
200 153
200 693
200 691
047 637
200 551
134 201
024 376
148 253
201 228
141 162
174 823
115 093
079 739
163 519
139 041
203 197
. . WRAPPER, feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . OVERLAY, upper front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . CIRCUIT CARD ASSY, switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . PANEL, pc card display/micro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . HOUSING RCPT+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . ENCLOSURE, control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . STAND–OFF SUPPORT, pc card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . PLUG, 0.625 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . BUSHING, snap–in nyl 1.375 id x 1.750 mtg hole . . . . . . . . . . . . . . . . . . 2
. . CABLE, power (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . HOUSING PLUG PINS+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . 1
. . . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . CONN, circ cpc clamp str rlf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . CABLE, port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.5 ft
. . . . STRAIN RELIEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . INDUCTOR, input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 9-2. Control Box (Figure 9-1 Item 1) (Continued)
. . . 15 . . . . . . . . . . . . . . .
. . . 16 . . . . . . . . . . . . . . .
. . . 17 . . . . PC1 . . . . .
. . . 18 . . . . . S1 . . . . . .
. . . 19 . . . . . . . . . . . . . . .
. . . 20 . . . . . S2 . . . . . .
. . . 21 . . . . . . . . . . . . . . .
. . . 22 . . . . . . . . . . . . . . .
. . . 23 . . . . . . . . . . . . . . .
. . . . . . . . PLG5,35 . . .
. . . . . . . . . PLG44 . . . .
. . . . . . . . PLG37,38 . . .
. . . . . . . . RC37,40 . . .
. . . . . . . . PLG6,36 . . .
. . . . . . . . . PLG46 . . . .
. . . . . . . . PLG11,61 . . .
. . . . . . . . . PLG45 . . . .
. . . . . . . . . . PLG1 . . . . .
. . . . . . . . . PLG51 . . . .
. . . . . . . . . PLG12 . . . .
. . . . . . . . PLG4,34 . . .
. . . . . . . . PLG7,27 . . .
. . . . . . . . . PLG10 . . . .
070 371
200 553
201 549
111 997
200 559
200 295
202 587
000 527
179 851
131 204
148 389
047 636
047 637
115 094
115 090
131 005
131 203
202 592
174 824
141 162
136 810
115 091
130 203
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
BUSHING, snap–in nyl .937 id x 1.125 mtg hole . . . . . . . . . . . . . . . . . . . .
BRACKET, control box mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CIRCUIT CARD ASSY, motor control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SWITCH, rocker spst 10A 250 VAC on–off . . . . . . . . . . . . . . . . . . . . . . . .
PANEL, front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SWITCH, rocker spdt 15A 12V on–off–on . . . . . . . . . . . . . . . . . . . . . . . . .
NAMEPLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PLUG, 0.875 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KNOB, pointer 1.670 dia x .250 id push on w/spring . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG PINS+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG PINS+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG PINS+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG PINS+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-1500–2 Page 31
16
8
15
14
13
9
12
11
9
10
8
7
6
5
2
26
27
23
22
26
25
18
24
21
20
17
19
3
4
. Hardware is common and
28
1
not available unless listed.
ST-142 601-F
Figure 9-3. Boom Assembly
OM-1500–2 Page 32
Item
No.
Part
No.
Description
Quantity
Model
12
16
Figure 9-3. Boom Assembly (Figure 9-1 Item 13)
. . . 1 . . . . . 000 527
. . . 2 . . . . . 159 991
. . . 2 . . . . . 159 989
. . . 3 . . . . . 079 665
. . . 3 . . . . . 080 811
. . . 4 . . . . . 079 664
. . . 5 . . . . . 139 633
. . . 6 . . . . . 073 742
. . . 7 . . . . . 073 741
. . . 8 . . . . . 079 029
. . . 9 . . . . . 075 462
. . . 10 . . . . . 602 250
. . . 11 . . . . . 079 020
. . . 12 . . . . . 149 858
. . . 12 . . . . . 080 723
. . . 13 . . . . . 150 258
. . . 14 . . . . . 024 605
. . . 15 . . . . . 075 101
. . . 16 . . . . . 079 030
. . . 17 . . . . +174 754
. . . . . . . . . . . 080 157
. . . 18 . . . . . 174 688
. . . . . . . . . . . 142 804
. . . . . . . . . . . 134 327
. . . 19 . . . . . 073 666
. . . 20 . . . . . 047 224
. . . 21 . . . . . 602 246
. . . 22 . . . . . 079 667
. . . 22 . . . . . 080 812
. . . 23 . . . . . 079 632
. . . 24 . . . . . 602 243
. . . 25 . . . . . 079 622
. . . 26 . . . . . 010 313
. . . 27 . . . . . 079 621
. . . 28 . . . . . 139 336
. . . . . . . . . . . 149 322
. . PLUG, 0.875 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . BOOM, single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . BOOM, single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . GUIDE, wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . GUIDE, wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . GUIDE, wire inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . LINER, monocoil 3/32-1/8 wire x 15.687 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . PIN, clevis .750 OD x 2.156 lg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . CLEVIS, .812 yoke 6.062 lg .750-16thd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . NUT, stl hex full fnsh .750-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . .
. . SHAFT, boom counterbalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . WASHER, flat stl SAE .750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . .
. . NUT, stl hex elastic stop .750-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . SPRING, cprsn 3.750 OD x .625 wire x 36.000 . . . . . . . . . . . . . . . . . . . . . . . 1
. . SPRING, cprsn 3.750 OD x .687 wire x 33.750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . RETAINER, spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . BEARING, ball thr sgl row .750 x 1.625 x .625 . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . NUT, stl hex special .750-16 x 1.250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . WASHER, lock stl ext tooth .750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . BASE, swivel boom (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . . . FITTING, grease 1/8NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . . . BRACKET, mtg control tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . LABEL, Swingarc caution heavy spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . LABEL, warning general precautionary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . BOLT, mach stl hexhd .750-16 x 2.750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . KNOB, T-bar .500-13 thd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . WASHER, flat stl std .500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . PIPE, plstc .500 x 133.750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . PIPE, plstc .500 x 181.750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BOLT, U stl .250-20 x .875 wide x 1.375 deep . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . .
. . WASHER, flat stl std .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . .
. . WASHER, shldr .381 ID x .750 OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . .
. . PIN, cotter hair .072 x 1.437 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . .
. . PULLEY, V sgl grv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . GUARD, motor protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . .
. . CLAMP, hose .405 – .485clp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . .
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
3
2
2
1
1
2
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-1500–2 Page 33
. Hardware is common and
not available unless listed.
See Table 9-1 For
Drive Roll & Wire Guide Kits
18
19
20
21
22
23
17
24
16
25
15
7
6
5
8
14
9
10
12
4
11
3
26
2
13
1
2
27
39
28
40
41
42
38
37
36
29
35
30
34
33
32
1
31
ST-801 456-A
Figure 9-4. Drive Assembly, Wire
OM-1500–2 Page 34
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 9-4. Drive Assembly, Wire (Figure 9-1 Item 27)
. . . 1 . . . . . . . . . . . . . . . . 010 668 . . SCREW, cap stl sch .250-20 x 1.500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 2 . . . . . . . . . . . . . . . . 172 075 . . CARRIER, drive roll w/components 24 pitch . . . . . . . . . . . . . . . . . . . . . . 4
. . . 3 . . . . . . . . . . . . . . . . 149 962 . . SPACER, carrier drive roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 4 . . . . . . . . . . . . . . . . 149 486 . . PIN, rotation arm rocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 5 . . . . . . . . . . . . . . . . 163 282 . . NUT, .250-28 stl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 6 . . . . . . . . . . . . . . . . 165 798 . . SPRING, pressure arm retaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 7 . . . . . . . . . . . . . . . . 165 799 . . WASHER, flat .257 ID stl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 8 . . . . . . . . . . . . . . . . 132 750 . . ARM, pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 9 . . . . . . . . . . . . . . . . 150 520 . . SPACER, rotation pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 10 . . . . . . . . . . . . . . . . 133 493 . . RING, retaining ext .250 shaft x .025thk . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 11 . . . . . . . . . . . . . . . . 133 350 . . PIN, hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 12 . . . . . . M1 . . . . . 201 230 . . MOTOR, gear 1/8hp 24VDC standard speed (consisting of) . . . . . . . . 1
. . . 12 . . . . . . M1 . . . . ♦201 231 . . MOTOR, gear 1/8hp 24VDC high speed (consisting of) . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 153 491 . . . . KIT, brush replacement (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 153 492 . . . . . . CAP, brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . . . *153 493 . . . . . . BRUSH, carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 13 . . . . . . . . . . . . . . . . 155 098 . . . . KIT, cover motor gearbox (consisting of) . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 153 550 . . . . . . COVER, motor gearbox (consisting of) . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 155 099 . . . . . . . GASKET, cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 155 100 . . . . . . . SCREW, cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . 154 031 . . . . . . SPACER, locating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . . . 133 493 . . . . RING, rtng ext .250 shaft grv x .025thk . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 184 136 . . KIT, brush holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 14 . . . . . . . . . . . . . . . . 182 414 . . WASHER, flat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 15 . . . . . . . . . . . . . . . . 182 415 . . PIN, cotter hair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 16 . . . . . . . . . . . . . . . . 137 248 . . SPRING, indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 17 . . . . . . . . . . . . . . . . 129 351 . . SCREW, hexwhd-slt stl slffmg 8-32 x .500 . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 18 . . . . . . . . . . . . . . . . 602 200 . . WASHER, lock stl split No. 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 19 . . . . . . . . . . . . . . . . 604 772 . . WASHER, flat stl SAE No. 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 20 . . . . . . . . . . . . . . . . 182 156 . . SPRING, cprsn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 21 . . . . . . . . . . . . . . . . 182 155 . . SPRING, cprsn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 22 . . . . . . . . . . . . . . . . 132 746 . . BUSHING, spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 23 . . . . . . . . . . . . . . . . 181 522 . . SHAFT, spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 24 . . . . . . . . . . . . . . . . 132 747 . . CARRIER, shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 25 . . . . . . . . . . . . . . . . 133 739 . . WASHER, flat .375 ID x .625 OD x .062 . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 26 . . . . . . . . . . . . . . . . 183 330 . . KNOB, extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 27 . . . . . PC51 . . . . 201 225 . . CIRCUIT CARD, digital tach (consisting of) . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . PLG5 . . . . 131 204 . . . . CONNECTOR & SOCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 604 311 . . . . GROMMET, rbr .250 ID x .375mtg hole . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 28 . . . . . . . . . . . . . . . . 132 611 . . OPTICAL ENCODER DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 29 . . . . . . . . . . . . . . . . 149 959 . . FITTING, brs barbed M 3/16tbg x .312-24 . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 30 . . . . . . . . . . . . . . . . 179 265 . . ADAPTER, gun/feeder LH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 31 . . . . . . . . . . . . . . . . 108 940 . . SCREW, cap stl hexwhd .250-20 x .750 . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 32 . . . . . . . . . . . . . . . . 604 538 . . WASHER, flat stl SAE .312 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 33 . . . . . . . . . . . . . . . . 151 437 . . KNOB, plstc T 1.125 lg x .312-18 x 1.500 bar . . . . . . . . . . . . . . . . . . . . 1
. . . 34 . . . . . . . . . . . . . . . . 128 237 . . SCREW, hexwhd-slt stl slffmg 10-32 x .500 . . . . . . . . . . . . . . . . . . . . . . 2
. . . 35 . . . . . . . . . . . . . . . +179 263 . . COVER, drive roll (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . 178 937 . . . . LABEL, warning electric shock and pinch . . . . . . . . . . . . . . . . . . . . . . 1
. . . 36 . . . . . . . . . . . . . . . . 601 872 . . NUT, stl hex full .375-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 37 . . . . . . . . . . . . . . . . 602 213 . . WASHER, lock stl split .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 38 . . . . . . . . . . . . . . . . 602 243 . . WASHER, flat stl .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 39 . . . . . . . . . . . . . . . . 601 966 . . SCREW, cap stl hexhd .375-16 x 1.250 . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 40 . . . . . . . . . . . . . . . . 167 387 . . SPACER, locating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 41 . . . . . . . . . . . . . . . . 168 825 . . DRIVE, pinion 40T 24P .376 bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 42 . . . . . . . . . . . . . . . . 133 308 . . RING, retaining ext .375 shaft x .025thk . . . . . . . . . . . . . . . . . . . . . . . . . 1
♦Part of 194 196 Optional High Speed Motor
*Recommended Spare Parts.
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-1500–2 Page 35
. Hardware is common and
1
not available unless listed.
2
6
3
5
4
7*
9
3
2
10
11
12
13
14
*Includes Item 8
8
ST-146 339-B
Figure 9-5. Support, Hub & Reel
Item
No.
Part
No.
Description
Quantity
Figure 9-5. Support, Hub & Reel (Figure 9-1 Item 10)
...... 1
...... 2
...... 3
...... 4
...... 5
...... 6
...... 7
...... 8
...... 9
. . . . . 10
. . . . . . 11
. . . . . 12
. . . . . 13
. . . . . 14
. . . . . . 142 399
. . . . . . 010 191
. . . . . . 058 628
. . . . . . 058 428
. . . . . ♦108 008
. . . . . . 124 900
. . . . . +168 104
. . . . . . 166 594
. . . . . . 168 103
. . . . . . 057 971
. . . . . . 010 233
. . . . . . 605 941
. . . . . . 136 684
. . . . . . 058 427
. . SUPPORT, reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . WASHER, fbr .656 ID x 1.500 OD x .125thk . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . WASHER, brake stl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . HUB, spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . REEL, wire 60 lb (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . SUPPORT, reel spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . RETAINER, spool support (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . LABEL, caution falling wire reel can cause damage . . . . . . . . . . . . . . . . . . .
. . . . NUT, spanner spool support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . WASHER, flat stl keyed 1.500dia x .125thk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . SPRING, cprsn .970 OD x .120 wire x 1.250 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . WASHER, flat stl .640 ID x 1.000 OD x 14ga thk . . . . . . . . . . . . . . . . . . . . . . . . .
. . NUT, stl slflkg hex reg .625-11 w/nylon insert . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . RING, retaining spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2
2
1
1
1
1
1
1
1
1
1
1
1
♦OPTIONAL
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-1500–2 Page 36
Fraction
Intermediate
Guide
Wire Size
Inlet
Guide
Table 9-1. Drive Roll and Wire Guide Kits
150 993
149 518
151 024
087 130
Metric
.023-.025 in. 0.6 mm
V-GROOVE
4 Roll
Kit
Drive
Roll
U-GROOVE
VK-GROOVE
4 Roll
Kit
Drive
Roll
4 Roll
Kit
Drive
Roll
151 036
072 000
151 052
132 958
UC-GROOVE
4 Roll
Kit
Drive
Roll
.030 in.
0.8 mm
150 993
149 518
151 025
053 695
.035 in.
0.9 mm
150 993
149 518
151 026
053 700
.040 in.
1.0 mm
150 993
149 518
161 189
053 696
.045 in.
1.1/1.2 mm 150 994
149 519
151 027
053 697
151 037
053 701
151 053
132 957
151 070
083 489
.052 in.
1.3/1.4 mm 150 994
149 519
151 028
053 698
151 038
053 702
151 054
132 956
151 071
083 490
151 029
053 699
151 039
053 706
151 055
132 955
151 072
053 708
151 056
132 959
1/16 in.
(.062 in.)
1.6 mm
150 995
149 520
.068-.072 in. 1.8 mm
150 995
149 520
5/64 in.
(.079 in.)
2.0 mm
150 995
149 520
151 040
053 704
151 057
132 960
151 073
053 710
3/32 in.
(.094 in.)
2.4 mm
150 996
149 521
151 041
053 703
151 058
132 961
151 074
053 709
7/64 in.
(.110 in.)
2.8 mm
150 996
149 521
151 042
053 705
151 059
132 962
151 075
053 711
1/8 in.
(.125 in.)
3.2 mm
150 997
149 522
151 043
053 707
151 060
132 963
151 076
053 712
Each Kit Contains An Inlet Guide, Intermediate Guide, And 045 233 Antiwear Guide With 604 612 Setscrew 8-32 x .125, Along
With 4 Drive Rolls.
2 Kits Required For Dual Models.
S-0549-D
OM-1500–2 Page 37
Notes
OM-1500–2 Page 38
Effective January 1, 2000
(Equipment with a serial number preface of “LA” or newer)
This limited warranty supersedes all previous Miller warranties and is exclusive with no other
guarantees or warranties expressed or implied.
Warranty Questions?
Call
1-800-4-A-MILLER
for your local
Miller distributor.
Your distributor also gives
you ...
Service
You always get the fast,
reliable response you
need. Most replacement
parts can be in your
hands in 24 hours.
Support
Need fast answers to the
tough welding questions?
Contact your distributor.
The expertise of the
distributor and Miller is
there to help you, every
step of the way.
*
LIMITED WARRANTY – Subject to the terms and conditions
below, Miller Electric Mfg. Co., Appleton, Wisconsin, warrants
to its original retail purchaser that new Miller equipment sold
after the effective date of this limited warranty is free of defects
in material and workmanship at the time it is shipped by Miller.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS.
Within the warranty periods listed below, Miller will repair or
replace any warranted parts or components that fail due to
such defects in material or workmanship. Miller must be
notified in writing within thirty (30) days of such defect or
failure, at which time Miller will provide instructions on the
warranty claim procedures to be followed.
Miller shall honor warranty claims on warranted equipment
listed below in the event of such a failure within the warranty
time periods. All warranty time periods start on the date that
the equipment was delivered to the original retail purchaser, or
one year after the equipment is sent to a North American
distributor or eighteen months after the equipment is sent to an
International distributor.
1.
5 Years Parts – 3 Years Labor
*
*
2.
3 Years — Parts and Labor
*
*
*
*
*
*
3.
Original main power rectifiers
Inverters (input and output rectifiers only)
Transformer/Rectifier Power Sources
Plasma Arc Cutting Power Sources
Semi-Automatic and Automatic Wire Feeders
Inverter Power Supplies
Intellitig
Engine Driven Welding Generators
(NOTE: Engines are warranted separately by
the engine manufacturer.)
1 Year — Parts and Labor
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
DS-2 Wire Feeder
Motor Driven Guns (w/exception of Spoolmate
185 & Spoolmate 250)
Process Controllers
Positioners and Controllers
Automatic Motion Devices
RFCS Foot Controls
Induction Heating Power Sources
Water Coolant Systems
HF Units
Grids
Maxstar 140
Spot Welders
Load Banks
Miller Cyclomatic Equipment
Running Gear/Trailers
Plasma Cutting Torches (except APT & SAF
Models)
Field Options
(NOTE: Field options are covered under True
Blue for the remaining warranty period of the
product they are installed in, or for a minimum of
one year — whichever is greater.)
4.
6 Months — Batteries
5.
90 Days — Parts
*
*
MIG Guns/TIG Torches
Induction Heating Coils and Blankets
*
*
*
*
*
APT, ZIPCUT & PLAZCUT Model Plasma Cutting
Torches
Remote Controls
Accessory Kits
Replacement Parts (No labor)
Spoolmate 185 & Spoolmate 250
Canvas Covers
Miller’s True Blue Limited Warranty shall not apply to:
1.
Consumable components; such as contact tips,
cutting nozzles, contactors, brushes, slip rings,
relays or parts that fail due to normal wear.
2.
Items furnished by Miller, but manufactured by others,
such as engines or trade accessories. These items are
covered by the manufacturer’s warranty, if any.
3.
Equipment that has been modified by any party other
than Miller, or equipment that has been improperly
installed, improperly operated or misused based upon
industry standards, or equipment which has not had
reasonable and necessary maintenance, or equipment
which has been used for operation outside of the
specifications for the equipment.
MILLER PRODUCTS ARE INTENDED FOR PURCHASE
AND USE BY COMMERCIAL/INDUSTRIAL USERS AND
PERSONS TRAINED AND EXPERIENCED IN THE USE
AND MAINTENANCE OF WELDING EQUIPMENT.
In the event of a warranty claim covered by this warranty, the
exclusive remedies shall be, at Miller’s option: (1) repair; or (2)
replacement; or, where authorized in writing by Miller in
appropriate cases, (3) the reasonable cost of repair or
replacement at an authorized Miller service station; or (4)
payment of or credit for the purchase price (less reasonable
depreciation based upon actual use) upon return of the goods
at customer’s risk and expense. Miller’s option of repair or
replacement will be F.O.B., Factory at Appleton, Wisconsin, or
F.O.B. at a Miller authorized service facility as determined by
Miller. Therefore no compensation or reimbursement for
transportation costs of any kind will be allowed.
TO THE EXTENT PERMITTED BY LAW, THE REMEDIES
PROVIDED HEREIN ARE THE SOLE AND EXCLUSIVE
REMEDIES. IN NO EVENT SHALL MILLER BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF
PROFIT), WHETHER BASED ON CONTRACT, TORT OR
ANY OTHER LEGAL THEORY.
ANY EXPRESS WARRANTY NOT PROVIDED HEREIN
AND ANY IMPLIED WARRANTY, GUARANTY OR
REPRESENTATION AS TO PERFORMANCE, AND ANY
REMEDY FOR BREACH OF CONTRACT TORT OR ANY
OTHER LEGAL THEORY WHICH, BUT FOR THIS
PROVISION,
MIGHT
ARISE
BY
IMPLICATION,
OPERATION OF LAW, CUSTOM OF TRADE OR COURSE
OF DEALING, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE, WITH RESPECT TO ANY AND ALL
EQUIPMENT FURNISHED BY MILLER IS EXCLUDED AND
DISCLAIMED BY MILLER.
Some states in the U.S.A. do not allow limitations of how long
an implied warranty lasts, or the exclusion of incidental,
indirect, special or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty
provides specific legal rights, and other rights may be
available, but may vary from state to state.
In Canada, legislation in some provinces provides for certain
additional warranties or remedies other than as stated herein,
and to the extent that they may not be waived, the limitations
and exclusions set out above may not apply. This Limited
Warranty provides specific legal rights, and other rights may
be available, but may vary from province to province.
miller_warr 7/00
Owner’s Record
Please complete and retain with your personal records.
Model Name
Serial/Style Number
Purchase Date
(Date which equipment was delivered to original customer.)
Distributor
Address
City
State
Zip
For Service
Call 1-800-4-A-Miller or see our website at www.MillerWelds.com
to locate a DISTRIBUTOR or SERVICE AGENCY near you.
Always provide Model Name and Serial/Style Number.
Contact your Distributor for:
Welding Supplies and Consumables
Options and Accessories
Personal Safety Equipment
Service and Repair
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Replacement Parts
Training (Schools, Videos, Books)
International Headquarters–USA
USA Phone: 920-735-4505 Auto-Attended
USA & Canada FAX: 920-735-4134
International FAX: 920-735-4125
Technical Manuals (Servicing Information
and Parts)
Circuit Diagrams
European Headquarters –
United Kingdom
Phone: 44 (0) 1204-593493
FAX: 44 (0) 1204-598066
Welding Process Handbooks
www.MillerWelds.com
Contact the Delivering Carrier for:
File a claim for loss or damage during
shipment.
For assistance in filing or settling claims,
contact your distributor and/or equipment
manufacturer’s Transportation Department.
PRINTED IN USA
 2001 Miller Electric Mfg. Co.
1/01