Deluxe Inverter Wall Mounted MSZ-FA Series

Air Conditioning
Heat Pumps
Deluxe Inverter Wall Mounted MSZ-FA Series
· Quietest High Wall Mounted in NZ*
· Retractable Flat Panel
· Plasma Duo Filter System
· Energy Saving "i-see Temperature Sensor"
· Optional 7 Day Timer
You want to feel the
warmth, not hear it.
*MSZ-FA25VA at Low Fan Speed and Maximum Output,
as at 1st March 2006 in the 2.5kW Cooling Range.
DELUXE WALL-MOUNTED
MSZ-FA Series
Plasma Duo Filter System
With Retractable Front Panel
Energy Saving "i-see Temperature Sensor"
Introducing the state-of-the-art range of Mitsubishi Electric Deluxe Inverter
Heat Pumps, specifically designed to combat and reduce common household
allergens and unpleasant odours. This unit provides optimal air quality that is
so vital for asthma and allergy sufferers.
The new energy saving "i-see sensor", automatically searches out temperature
disparities over a wide area. Thanks to this advanced sensing technology, all
Dimensions (H x W x D): 298 x 780 x 198mm
areas of the room are kept at an optimal temperature.
MSZ-FA25VA
(MSZ-FA25VA + MUZ-FA25VA)
Cooling Capacity: 2.5 (0.9~3.2) kW
Heating Capacity: 3.2 (0.9~5.0) kW
MSZ-FA35VA
(MSZ-FA35VA + MUZ-FA35VA)
Cooling Capacity: 3.5 (1.0~4.1) kW
Heating Capacity: 4.0 (0.9~6.0) kW
The new energy saving i-see mode searches
out temperature differences and directs heat
where you really need it.
Ideal for Asthma and Allergy sufferers.
Outdoor Units
HEAT PUMP
MUZ-FA25/35VA
Optional*:
PAR-21MAA
7 Day Timer
Infra Red
Remote Controller
*Requires MAC-3971F-E
MXZ
connection
Flat
Compact
Panel
& Slim
Design
AREA
INV
DC Inverter
Area Setting with i-see
Auto Restart
Plasma
Plasma
Deodorising
Air Purifying
VANE
MODE
Filter
Filter
Horizontal & Vertical
Horizontal & Vertical
Weekly
Timer
Centralised
ON / OFF
Optional
Optional
Auto Change Over
AUTO
For further information on these features please see our web site: www.bdt.co.nz
SWING
Dimensions (H x W x D): 550 x 800 x 285mm
Quick Clean
Cooling at
Cooling at
-10°C
AUTO
46°C/-10°C
Front Panel
All
From
21dBA
Air Purification
Heating at
-10°C
Only
Plasma Deodorising Filter
2.2wh
consumed
*1.1wh each for
Plasma Deodorisation
and Plasma
Air Purification.
Ammonia odour residual rate
The newly equipped "Plasma Deodorising Filter"
provides
state-of-the-art
Plasma Deodorisation Effect on Ammonia
deodorisation
Without Plasma Deodorisation
decomposition and reduction 100%
of
harmful
chemical
substances at the nano-level 80%
(1/1,000,000 of a millimetre). 60%
This is the key to high-power
deodorisation of the most 40%
With Plasma Deodorisation
unpleasant odours*1 in daily 20%
life such as ammonia, methyl
0%
0
10
20
30
mercaptan, trimethylamine
Operation time ( minutes )
and hydrogen sulphide.
Electrically conductive and
semi-insulating resin
adsorption component
• Plasma Air Purifying
Filter mechanism
Traps electrically charged particles.
GND electrode
Plasma Air Purifying Filter
Armed with the "Plasma Air Purifying Filter," which has already built
up a solid reputation in Japan, pollutants in the air are removed more
thoroughly than ever before. Besides collection of fine dust, smoke,
pollen and other allergy causing substances, this filter also provides
disinfecting and anti-viral effects.*2 Negative ions, with their soothing
and relaxing effects, are also generated.
*1: Not all odour components generated on a continuous basis ( building material odours, pet odours) can be removed.
Plasma electrode unit
GND elect rode
Deodorising Ceramic Filter
A ceramic filter equipped with
newly developed nano-hole
manganese catalyst.
Engineered for streamlined trapping
and crushing of odour-causing
elements over an impressive surface
area of 1,750m2
(approx. 7 tennis courts).
*2: Source: KRCES-Bio study Report No.16 00865 (November 22, 2004)
Maintenance is easy, just wash in water !
• Plasma Deodorising
Filter mechanism
To care for both the Plasma Deodorising Filter and
the Plasma Air Purifying Filter, just wash them in
water.
The deodorising ceramic filter, boasts a service
life of about 6 years.
The new moving
, leaves
no temperature difference unnoticed.
The moving "i see sensor" automatically moves from side to side,
searching out temperature disparities over a wide area of 150°.
Thanks to this advanced sensing technology, and the wide airflow of
150° from left to right (90° in cooling mode), all corners of even the
most spacious rooms are kept at optimal temperatures.
Plasma electrode unit
The dirty molecules are electrically
charged, while odour molecules are
decomposed down by radicals.
An improved "horizontal vane," for even more pleasant and refreshing airflow
Advanced airflow control supported by a newly configured horizontal vane
directs air at the floor level in heating mode. In cooling mode, the vane angle can
be kept nearly horizontal, for a pleasant and refreshing feeling.
In heating mode (with AREA setting : whole room)
Warm air is aimed at the cooler areas
Day time
Warmer area
Night time
Cooler area
Only
21dB
Whisper Quiet Operation
Wide Detection
MSZ-FA25
Mitsubishi Electric have a long standing reputation for offering some
of the quietest models in the industry. The Deluxe MSZ-FA range is
no exception. At only 21 dB(A) in Low Fan Speed and capable of
maximum output, the MSZ-FA25VA is the quietest Heat Pump in New
Zealand. You want to feel the warmth, not hear it!
“Area Setting” - for waste-free, energy-saving heating and cooling.
In AREA mode, efficient heating or cooling is targeted where it is
really needed - the right side, left side or the room as a whole. The
sensor can also operate only on the selected side.
21dB
the
quietest
Controllers:
Optional: PAR-21MAA 7 Day Timer
Wake up or come home to optimal temperatures whilst conserving energy!
The controller allows your system to be programmed to maintain optimal temperature levels during the standard times when
you are likely to be in the room. In the periods where you are unlikely to be there (such as during work hours or sleep time),
the temperature can be set back to a minimum holding temperature instead of turning the system completely off.
Turning a system on and off typically uses the most energy because the system has to heat a room starting from a very low
temperature. By maintaining a minimum holding temperature Mitsubishi Electric inverter technology saves you energy as the
temperature only needs to be raised by a couple of degrees.
Most air conditioning systems come with a 24 hour remote controller. This means that you can only set the system up to
The new clear and
automatically turn on and then off within a 24 hour period. This needs to be manually reactivated each time. The new
precise display is easy to
Mitsubishi Electric 7 day timer allows you to program up to 8 separate Start/Stop patterns per day over a 7 day period.
understand for any user.
For example:
• Between 10pm till 6am set temperature to 18°C
Operation Control Function
• Between 6am and 9am set temperature to 21°C
• Between 9am and 5.30pm set temperature to18°C
Limiting the set temperature range
Operation locking
• Between 5.30pm and 10pm set temperature to 21°C
Air conditioning operation within a limited temperature range.
Preventing the random modification of setting.
• Between 10pm and 6am set temperature to 18°C
The setting of the upper and lower limit temperature is
Two lock functions are available:
possible. This prevents excessive cooling and heating leading
1. Lock all buttons.
Industry First! Multi-language Display
to saving energy.
2. Lock all buttons other than ON/OFF button.
You can choose from 8 different languages.
Note:
The PAR-21MAA and
MAC-821SC-E both
require the
MAC-397IF-E adaptor.
Optional: MAC-821SC-E (Centralised ON/OFF Controller)
An optional Centralised ON/OFF Controller (MAC-821SC-E*) can also be incorporated to regulate all connected units in your
home (and enabling ON/OFF selection and operation status confirmation from one single controller).
MAC-821SC-E
Optional: G-50 Controller (With Web Server Functions)
Mitsubishi Electric can also offer you a control system to control your Air Conditioning from your local PC.
The G-50 or GB-50 gives you simple Computer control from your local Internet Explorer.
Web Screen Views
G-50
GB-50
Specifications:
MSZ-FA VA Deluxe Inverter Wall Mounted Heat Pump Model (R410A)
Deluxe Wall Mounted
Inverter
Heat Pump
MSZ-FA25VA
MSZ-FA35VA
TYPE
MODEL NAME
INDOOR UNIT
OUTDOOR UNIT
Capacity
Min-Max
[kW]
[kW]
Min-Max
[kW]
[kW]
Input
COP
COOL
0.935
0.185 - 0.880
0.250 -1.280
4.20
3.74
6.0
[dB (A) ]
46
47
Rated Current (In/Out) [A]
Max Current [A]
3.0
4.3
Out
7.21
7.44
In
[L/s]
165
165
Out
572
557
3.2
4.0
Min-Max
[L/s]
[kW]
[kW]
0.9 - 5.0
0.9 - 6.0
[kW]
[kW]
0.735
0.995
Min-Max
0.195 - 1.450
0.22 - 1.94
4.35
4.02
6.0
6.0
21 / 36
22 / 36
COP
Sound
Level
Star Rating
In (Lo/Hi) [dB (A) ]
[dB (A) ]
46
48
Rated Current (In/Out) [A]
Max Current [A]
3.5
4.6
Out
7.21
7.44
[L/s]
170
170
Out
[L/s]
Dimensions (HxWxD) [mm]
Weight
[kg]
Dimensions (HxWxD) [mm]
572
557
298 x 780 x 198
298 x 780 x 198
Air Volume
(High)
EXT. PIPE
1.0 - 4.1
0.595
22 / 36
Input
OUTDOOR
0.9-3.2
6.0
Star Rating
In (Lo/Hi) [dB (A) ]
Capacity
INDOOR
MSZ-FA35VA
MUZ-FA35VA
3.5
21 / 36
Sound
Level
Air Volume
(High)
HEAT
MSZ-FA25VA
MUZ-FA25VA
2.5
In
Weight
[kg]
Sound Level
[dB (A)]
Diameter (Liquid/Gas) [mm]
Max. Length/Height †
[m]
Chargeless
[m]
Cooling
[oC]
OPERATION
RANGE Outdoor Heating
[oC]
10
10
550 x 800 x 285
550 x 800 x 285
33
37
46
48
6.35 / 9.52
6.35 / 9.52
20 / 12
20 / 12
7
7
-10 / +46
-10 / +46
-10 / +24
-10 / +24
Quick Clean
The easily detachable front panel is
simple to wash, and the airflow vents
can be opened without any special
tools for quick
cleaning inside.
Energy Ratings
& Sound Levels
Energy
Rating
6.0
6.0
6.0
6.0
2.5kW 3.5kW
Cool
4.20 COP 3.74 COP
21 dB(A)* 22 dB(A)*
3.2kW 4.0kW
5 Year Warranty
Heat
4.35 COP 4.02 COP
21 dB(A)* 22 dB(A)*
Mitsubishi Electric Air Conditioners /
Heat Pumps come with a full 5 year
parts, labour and compressor
warranty.
Heat
Pump
MSZFA25VA
*
MSZFA35VA
SPL rated at low speed
Note:
1. Rating Conditions ( AS / NZS 3823 )
Cooling — Indoor: 27°C DB, 19°C WB Outdoor: 35°C DB
Heating — Indoor: 20°C DB Outdoor: 7°C DB, 6°C WB
Refrigerant piping length (one way): 5 m
2. Guaranteed operating range: see specifications table
3. Dry function will not work when the room temperature is below 13°C
Power Supply: All 230V, Single Phase, 50 Hz
Colour: Heat pump units shown may not be colour accurate, please ensure you view an actual unit
for colour matching.
† Maximum length is inclusive of height differential. i.e. (30/15) means the pipe can be 15m high
and 15m across for a total length of 30m.
Distributed by
AUCKLAND
WELLINGTON (HEAD OFFICE)
CHRISTCHURCH
Unit 1, 4 Walls Road
PO Box 12-726, Penrose
Phone (09) 526 9347, Fax (09) 526 9369
1 Parliament Street
PO Box 30-772, Lower Hutt
Phone (04) 560 9147, Fax (04) 560 9133
Suite 2, Level 1, 37 Mandeville Street
PO Box 1604, Christchurch
Phone (03) 341 2837, Fax (03) 341 2838
www.bdt.co.nz / 0800 QUIET AIRCON
New publication effective October 2006. Specifications subject to change without notice.