Motorola V3682 Product specifications

ST210_EN.BK Page 1 Thursday, May 11, 2000 2:56 PM
Quick Access Menu ‡
Quick Reference
Options Menu
Network and subscription dependent feature.
Not available in all areas.
Quick Reference
ST210_EN.BK Page 2 Thursday, May 11, 2000 2:56 PM
Special Keys
S
Press to turn phone on and off.
Press to accept call, setting, option,...
O
C
Press to reject call, setting, option,...
Press to enter the quick access features.
E
$
Press to access the options or phone book
menus.
<> Press to select entries and menu options.
,
Press to add a phone book entry.
Press to call Voicemail.
f
Making a Call
Enter CO.
Receiving a Call
Open the phone, or press O.
Playing a VoiceNote*
Select Messages, VoiceNote, Play VoiceNotes, or use the
quick access item.
Redialing the Last Number Called
1 Press O to display the last number dialed.
2 Press O to call the number.
One-Touch Dialing
Press and hold the appropriate digit key 1 to 9.
Storing Numbers in the Phone Book
1 Press , to access the Phone Book.
2 Press O to select phone memory, or
<O to select SIM card memory.
3 Enter C O, then H O, then
G O.
Ending a Call
Press O, C or close the phone.
Dialing Phone Book Numbers
Enter G > O.
Making an Emergency Call
Enter 911O. The call will be directed to a
Stopping a Call Alert
central emergency operator.
Quick Access Features
Press E followed by the appropriate key, or press
E, scroll to the feature and press O to select.
Recording a VoiceNote*
Press either of the volume buttons when the phone is
ringing or vibrating. This will stop the alert but not
answer the call.
Smart Button Operation
Press the smart button, located on the side of the phone,
to access an alphabetic list of your Phone Book entries.
Press the Start/Stop Record button (top of your phone).
Press the button again to stop recording.
* Use of the recording function is subject to varying State
and Federal laws regarding privacy of phone
conversations.
ST210_EN.BK Page 1 Thursday, May 11, 2000 2:56 PM
Introduction
Welcome
Congratulations on your purchase of a phone from Motorola, the world leader in wireless communications. The phones
are packed with features that put you in control and give you unrivaled power, while remaining discrete.
Control
• Customizable Quick Access Menu E - Place nine of your
most frequently used features in your own personal menu so
that they can be accessed with just two key presses. Icons make
each feature easy to identify.
• VoiceNotes feature } - Allows you to record a number of
personal voice messages or to record part of a phone call useful when you haven’t got pen and paper handy for taking
down directions or a message.*
• Voice Control - Use voice commands to call up Phone Book
entries and to select Quick Access options.
Power
• Superb battery performance G - Each phone is capable of
several hours conversation or several days standby, but is still
small and light.
! Before you use your phone, please see the ‘Your Battery’
section for important information on charging a new
battery.
* Use of the recording function is subject to varying State and Federal laws
regarding privacy of phone conversations.
Discretion
• VibraCall™ Alert L - In locations where you don’t want your
phone to ring, or which are too noisy to hear your phone ring, your
phone can vibrate to alert you of a call.
• Wearable Holster - Wear your phone in a stylish holster on your belt.
It is small and light enough to keep with you almost anywhere.*
• Stop Call Alert - Press either of the volume buttons when the phone
is ringing or vibrating. This will stop the alert but not answer the call.
* The holster has been designed for your convenience and is not meant to secure
your phone under all circumstances.
Personality™
This cellular telephone incorporates the Personality™ feature.
Unique to Motorola, the Personality™ feature removes the
complexity of cellular communications by guiding you through the
features and presenting you with simple choices every step of the
way. The Personality™ feature also allows you to personalize the
way you use your phone - for example, different ringer tones, a
phone book and network selection preferences - all presented with
clarity and simplicity. In this manual, each of the Personality™
features is identified with an j symbol to indicate that it is
customizable to meet your requirements.
Introduction
1
ST210_EN.BK Page 2 Thursday, May 11, 2000 2:56 PM
Understanding this Manual
Many of your phone options are accessed by a simple menu
system. A full description of the menus and how to move around
them is covered in the next section, Menu Navigation. When
the manual describes the use of each menu item, it will be
assumed that you are familiar with the menu system.
Key Presses
Entering Information
When you are requested to enter information, such as the
number of the phone you wish to call, this is represented in bold
type. For example:
C - enter the required telephone number.
A - enter your Personal Identification Number.
Key presses are represented in this manual using symbols so that
you may locate and use the required sequence quickly. A
sequence of key presses may be shown as follows:
B - enter your unlock code.
G - enter the Phone Book location number.
Prompts and Messages
$OC
This means that you should press the $ key followed by the
O key and then the C key, in sequence, not
simultaneously.
Your phone responds to key presses by displaying either easy to
understand prompts that guide you to the next action, or simple
messages confirming that your action is complete. Prompts and
messages are represented in this manual in LCD style, for
example:
Enter PIN
or Completed.
Other Symbols
You will find the following symbols used throughout this manual:
AA Note contains additional information which is relevant to
the feature/item.
! A Caution contains important additional information
which is relevant to the efficient and/or safe usage of
your phone.
j This symbol indicates that the feature is a Personality™
feature that can be customized to meet your requirements.
iThis symbol indicates a short key sequence for the feature.
2
Introduction
ST210_EN.BK Page 3 Thursday, May 11, 2000 2:56 PM
Menu Navigation
A large number of your phone's options are accessed by using
menus which use a common approach for selection, change and
cancellation.
Please read this section carefully before attempting to access a
menu option. When you understand the common approach to
menu navigation and how the menus are shown on the page,
you will be able to access and change options with ease.
Entering the Menus
Two different keys are used to access the menus:
$
enters the Options menu while in standby mode;
enters the In-call menu during a call.
E
enters the Quick Access menu.
Once entered, the menus use the $, <, >, O and
C keys in a common manner to access, select and change
individual options.
Leaving the Menus
To leave any of the menus, you can either press and hold the
C key or repeatedly press the C key. Both of these actions
will return your phone to the standby mode.
i Alternatively, a quicker way to leave the menus is to press
EC.
Menus and Sub-menus
A menu is a simple list of options. Some of these options provide
access to a further list of options called a sub-menu. When
navigating through the menus you may find it is helpful to think
in terms of menu levels - the ‘parent’ menu being on one level
and its sub-menus being on a lower level.
Moving To and Selecting a Menu Option
To move from one option to another on the same level, use the
scroll keys: the > key scrolls forward and the < key scrolls
backward. When you find the option you want, press the O
key to select it.
Depending on the option you select, one of three things will
happen:
• either a brief message will be displayed confirming an action,
for example Completed.
• or a prompt will be displayed requesting you to enter
information, for example Enter PIN or Enter Name.
• or the first option of a sub-menu will be displayed. You can
select this option using the O key or browse through the
other options using the scroll keys.
To leave an option or sub-menu, press the C key. This will take
you back to the parent menu item.
Menu Options with Security Codes
Some options are protected from misuse by requiring you to
enter one of the security codes. To use these options, you must
enter the requested code before proceeding.
Introduction
3
ST210_EN.BK Page 4 Thursday, May 11, 2000 2:56 PM
Menu Navigation - A Working Example
The following steps will take you through how to switch the
Extended Menus option on:
1 When the phone is in the standby mode, press the $ key.
This will access the Options menu and Access Internet
will be displayed.*
2 Press the < or > key repeatedly to go to the Phone
Setup menu item.
3 Press the O key to select the sub-menu.
4 Press the < or > key repeatedly until the Extended
Menus sub-menu item is shown in the display.
5 Press the O key to select this item. You can now select
between On or Off, the current setting will be shown with a
z character. If the z character is next to Off, press < or
> and then O to switch on the Extended Menus. If the
z character is next to On, press C to leave the setting as it
is.
*
>
>
>
>
>
>
>
>
>
>
* Network and subscription dependent feature. Not available in all areas.
† Availability depends on the type and settings of the SIM card, and/or
your subscription to these features.
# If your service provider has added their own menu, Access Internet will
not be the first item in the Options menu.
4
Introduction
>
ST210_EN.BK Page 5 Thursday, May 11, 2000 2:56 PM
j Short, Extended and Personalized Menus
With the Personality™ feature, you can personalize the menus by
choosing which features you want readily available. The features
that are less frequently used can be stored out of sight.
The menu diagrams in this manual show the condition of the
menu settings when you first receive your phone. Some features
are in the Short Menu and are shown in bold type. Other
features are in the Extended Menu and appear in italics.
You can change which features appear in the Short and Extended
Menus, and therefore personalize the menus, to suit your
requirements.
If you want to move a feature from the Short Menu to the
Extended Menu (or from the Extended Menu to the Short Menu),
go to the feature and then hold down the O key until a
prompt appears offering the following choices:
• Add the current feature to the Short Menu/Extended Menu.
• Leave the current feature in the Short/Extended Menu.
Select the option you want by pressing the O key.
The settings for some menu features cannot be changed.
Introduction
5
ST210_EN.BK Page 6 Thursday, May 11, 2000 2:56 PM
6
Introduction
ST210_EN.BK Page 7 Thursday, May 11, 2000 2:56 PM
Contents
Safety
Important information for the efficient and safe operation of your phone ............................................................................... 9
About Your Phone, Battery and SIM Card
Introduces your phone, explains how to charge and maintain batteries, explains about your SIM Card.............................. 13
Making and Receiving Phone Calls
Explains how to make single or conference calls, how to redial, how to transfer a call, and how to end a call................... 21
Using Voice Features
Explains how to use VoiceNotes and Voice Control features on your phone ........................................................................... 33
Using the Options Menu
Provides an explanation of the Options Menu and how to use it ............................................................................................. 41
Using the Quick Access Menu
Provides an explanation of the Quick Access Menu and how to use it..................................................................................... 83
Optional Accessories
Details the accessories available for use with your phone......................................................................................................... 89
What To Do If...
Helps you to solve any problems that may occur........................................................................................................................ 91
Index
A comprehensive Index ................................................................................................................................................................. 99
The Manufacturer reserves the right to make changes in technical and product specifications without prior notice.
Contents
7
ST210_EN.BK Page 8 Thursday, May 11, 2000 2:56 PM
8
Contents
ST210_EN.BK Page 9 Thursday, May 11, 2000 2:56 PM
Safety
Wireless Phone Safety Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you the powerful ability to
communicate by voice—almost anywhere, anytime, wherever
wireless phone service is available and safe conditions allow. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. If you find it
necessary to use your wireless phone while behind the wheel of a
car, practice good common sense and remember the following tips:
1 Get to know your Motorola wireless phone and its features such
as speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
2 When available, use a hands-free device. If possible, add an
additional layer of convenience to your wireless phone with one
of the many Motorola Original hands-free accessories available
today.
3 Position your wireless phone within easy reach. Be able to access
your wireless phone without removing your eyes from the road. If
you receive an incoming call at an inconvenient time, if possible,
let your voice mail answer it for you.
4 Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.
5 If you receive an incoming call at an inconvenient time do not
take notes or look up phone numbers while driving. Jotting
down a “to do” list or going through your address book takes
attention away from your primary responsibility—driving safely.
6 Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
7 Do not engage in stressful or emotional conversations that may
be distracting. Make people you are talking with aware you are
driving and suspend conversations which have the potential to
divert your attention away from the road.
8 Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies.*
9 Use your wireless phone to help others in emergencies. If you see
an auto accident, crime in progress or other serious emergency
where lives are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.*
10 Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special nonemergency wireless number.*
Check the laws and regulations on the use of wireless telephones
and their accessories in the areas where you drive. Always obey
them. The use of these devices may be prohibited or restricted in
certain areas.
For more information, please call 1-888-901-SAFE or visit the CTIA
website at www.wow-com.com™.
*Wherever wireless phone service is available.
Safety
9
ST210_EN.BK Page 10 Thursday, May 11, 2000 2:56 PM
Hand-Held Portable PCS Telephone
IMPORTANT
Read this information before using
your wireless handheld phone.
Exposure To Radio Frequency Signals
Your wireless handheld portable telephone is a low power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August 1996, the Federal Communications Commission (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies:
• American National Standards Institute (ANSI) IEEE. C95. 1-1992
• National Council on Radiation Protection and Measurement
(NCRP). Report 86
• International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1996
• Ministry of Health (Canada), Safety Code 6
Those standards were based on comprehensive and periodic
evaluations of relevant scientific literature. For example, over 120
scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available
body of research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC guidelines (and
those standards). For additional information concerning exposure
to radio frequency signals, see the statement by the FDA at the
10
Safety
end of this user guide.
To maintain compliance with FCC RF exposure guidelines, if you
wear a handset on your body, use the Motorola-supplied or
approved carrying case, holster, or other body-worn accessory. If
you do not use a body-worn accessory, ensure the antenna is at
least one inch (2.5 centimeters) from your body when
transmitting. Use of non-Motorola accessories may violate FCC
RF exposure guidelines.
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications or attachments could
damage the phone, and may violate FCC regulations.
Phone Operation
NORMAL OPERATION
Hold the phone as you would any other telephone, with the
antenna pointed up and over your shoulder.
TIPS ON EFFICIENT OPERATION
Observe the following guidelines to operate your phone most
efficiently.
• Extend your antenna fully, if applicable.
• Do not touch the antenna unnecessarily when the phone is in
use. Contact with the antenna affects call quality and may cause
the phone to operate at a higher power level than otherwise
needed.
ST210_EN.BK Page 11 Thursday, May 11, 2000 2:56 PM
Batteries
Caution: All batteries can cause property damage, injury, or
burns if a conductive material, such as jewelry, keys or beaded
chains, touches exposed terminals. The material may complete
an electrical circuit and become quite hot. To protect against such
unwanted current drain, exercise care in handling any charged
battery, particularly when placing it inside your pocket, purse or
other container with metal objects. When the battery is detached
from the phone, your batteries are packed with a protective
battery cover; please use this cover for storing your batteries
when not in use.
Driving
Check the laws and regulations on the use of wireless telephones
in the areas where you drive. Always obey them. Observe the
following guidelines when using your phone while driving.
• Give full attention to driving--driving safely is your first
responsibility.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call if
driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals.
However, certain equipment may not be shielded against the RF
signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that
a minimum separation of six inches (6”) be maintained between
a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• should ALWAYS keep the phone more than six inches from
their pacemaker when the phone is turned ON;
• should not carry the phone in a breast pocket;
• should use the ear opposite the pacemaker to minimize the
potential for interference;
• should turn the phone OFF immediately if you have any reason
to suspect that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so. Hospitals
or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Safety
11
ST210_EN.BK Page 12 Thursday, May 11, 2000 2:56 PM
Posted Facilities
Turn your phone OFF in any facility where posted notices so
require.
Aircraft
Switch OFF your phone before boarding an aircraft.
Airline regulations prohibit using your phone while in the air.
Check and comply with the policy of your airline regarding the
use of your phone while the aircraft is on the ground.
Blasting Areas
To avoid interfering with blasting operations, turn your phone
OFF when in a “blasting area” or in areas posted: “Turn off twoway radio”. Obey all signs and instructions.
Potentially Explosive Atmospheres
Turn your phone OFF, do not remove your battery when you are
in any area with a potentially explosive atmosphere, and obey all
signs and instructions. Sparks from your battery in such areas
could cause an explosion or fire resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include fueling areas such as
gasoline stations; below deck on boats; fuel or chemical transfer
or storage facilities; areas where fuel odors are present (for
example, if a gas/propane leak occurs in a car or home); areas
where the air contains chemicals or particles, such as grain, dust,
or metal powders, and any other area where you would normally
be advised to turn off your vehicle engine.
12
Safety
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including both installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If invehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
ST210_EN.BK Page 13 Thursday, May 11, 2000 2:56 PM
About Your Phone, Battery and SIM Card
Special Keys
S
Turns the phone on and off.
O
Accept call, setting, option.
C
Reject call, setting, option.
E
Enter the quick access menu.
$
Press to access the Options and Phone Book menus.
<>
Press to scroll to entries and menu options.
,
Press to add a phone book entry.
f
Press to call Voicemail.
The Smart Button
The smart button (=) is on the left-hand side
of your phone in between the two volume
keys. Press it to quickly access all your Phone
Book entries, and then either scroll through
the entries using the volume buttons or press
one of the alphanumeric keys to search for a
specific name - for example, press 7 to
search for the name Pam, or press 7 four
times to search for the name Sam.
AIf a Phone Book entry does not have a
name, it will not be displayed.
If you are using the optional headset, you
can also use the smart button to make,
answer and end calls as follows:
• To make a call, enter or recall a number and then press and
hold = for 1.5 seconds.
Volume Buttons
The Volume buttons are on the left-hand side of your phone,
above and below the smart button. The buttons are used for
adjusting the keypad, earpiece and ringer volume. A volume
meter will display the current volume setting. The meter will
disappear after a short time, or if you press O or C.
• To adjust the keypad and earpiece volume, press the buttons
with no other features selected.
• To adjust the ringer volume, press E and then use the
buttons to set the required volume.
The volume buttons can also be used to scroll though the Phone
Book entries after pressing the smart button.
AIf you receive a call and you do not want to answer it
immediately, you can press either of the volume buttons to
stop the phone from ringing or vibrating. This will not
answer the call.
The Start/Stop Record Button
The Start/Stop Record button (?) is on the top of the phone, next
to the antenna. Press it to start and stop recording VoiceNotes™.
Refer to Using VoiceNotes for more information.
• To answer a call, press = for 1.5 seconds.
• To end a call, press = for 1.5 seconds and then quickly press
= again.
About Your Phone, Battery and SIM Card
13
ST210_EN.BK Page 14 Thursday, May 11, 2000 2:56 PM
The Display
The display on your phone can
show alphanumeric characters as
well as useful information
symbols.The various elements of
the display are as follows:
ABC123
Characters are used to display messages and
telephone numbers.
rx
Signal Strength. The more segments displayed in
the bar graph, the better the signal strength.
k
In Use. Displayed when a call is in progress.
l
Roam. Displayed when you are registered on a
system other than your home system.
n
Home Zone. Availability depends on your service
provider.
o
Short Message Service. Displayed when the
phone has received a message. The symbol will
flash when your message storage area is full.
p
Voicemail Waiting Indicator. Displayed when you
have a voice message waiting. The availability of
this feature depends on your service provider.
h
Ringer On. Displayed when the call ringer is
selected. If you select the No Ring or Vibrate or the
Vibrate Only options this symbol will not be
displayed.
q
Battery Charge Indicator. The more segments
displayed, the greater the battery charge.
14
About Your Phone, Battery and SIM Card
B...K
Icons are displayed when you are in the quick
access menu.
z
Indicates that a menu item is currently selected.
12:00
Real Time Clock. The real time clock can display
the time in either a 12-hour or 24-hour format.
Low Temperature Use
The liquid crystal display used in your phone will behave
differently at extremely low temperatures. You may notice that
the display responds slowly to key presses; this is to be expected
and does not affect the phone operation in any way.
ST210_EN.BK Page 15 Thursday, May 11, 2000 2:56 PM
Looking After Your Phone
• Never leave your phone or battery in extreme temperatures
(over 60˚C (140˚F)), for example, behind glass in very hot,
direct sunlight.
• To clean your phone, use an antistatic cloth. Do not use an
electrostatically charged cloth.
The Status Indicator
The status indicator on the top of the phone
provides you with the following information:
Incoming Call
Alternate Red/Green
In Service
Flashing Green
No Service
Flashing Red
Roaming
Flashing Yellow
Your Battery
Charging a New Battery
To ensure maximum battery performance, a new battery (or
battery that has not been used for several months) should be
charged for about 3-4 hours before use.
After this initial charge, you can recharge your battery at your
convenience, using the phone’s rapid travel charger.
ASee the chart on page 18 for charging times.
Important Battery Information
! Only Motorola Original Accessory batteries can be
charged in the phone or the optional desktop charger.
This is to protect you and your phone from the risks of
incorrect charging.
To ensure that you enjoy maximum battery life and use your
battery to its fullest capacity:
• The battery should be at or near room temperature when
charging.
About Your Phone, Battery and SIM Card
15
ST210_EN.BK Page 16 Thursday, May 11, 2000 2:56 PM
Battery Performance and Maintenance
• Best battery performance will be achieved when you regularly
charge and discharge batteries as instructed in this manual.
• Battery performance is greatly affected by network coverage.
• If left unused, a fully charged battery will discharge itself in
approximately one month.
• When not in use, store your battery uncharged in a cool, dark
and dry place.
• Expected life of a battery is about 300-500 charge/discharge
cycles.
Low Battery Warning
When the battery level is low and only a few minutes of talk time
remain, a warning signal (two double beeps) will sound, the
border of the battery symbol will begin to flash, and Low
Battery will be displayed.
When the battery is completely discharged, your phone will turn
off.
Battery Care and Storage
To prolong the life of your batteries, avoid exposing them to
temperatures below -10˚C (14˚F) or above 45˚C (113˚F). Never
leave your phone or batteries in extreme temperatures (over 60˚C
(140˚F)), for example, behind glass in very hot, direct sunlight.
Battery Disposal
To dispose of batteries, check with your local recycling center for
a battery recycler near you. Never immerse batteries in water.
Never dispose of batteries in fire.
16
About Your Phone, Battery and SIM Card
Removing Your Battery
! Switch off your phone before removing the battery.
Failure to do so may damage your phone memory.
1 Press the release catch on the battery compartment and lift off
the cover.
2 Push the battery toward the top of the phone and lift the
battery out from the bottom end.
ST210_EN.BK Page 17 Thursday, May 11, 2000 2:56 PM
Fitting Your Battery
AThe connector is keyed and can only be inserted one way.
1 Remove the battery compartment cover.
2 Align the connections on the battery with the connections on
the phone.
3 Press the battery toward the connections and push it
downward.
4 Pull battery back until it clicks into place. Replace the cover.
4 Insert the travel charger plug into a 110V AC electrical outlet.
A beep-tone is heard and the battery icon flashes when charging
begins.
Charging Your Battery Using the Travel Charger
The travel charger can power the phone and charge a fitted
battery.
AYour phone can be either on or off during charging.
The state of charging is monitored and displayed by your phone.
See ‘Battery Meter Indicators’ later in this section for details.
To charge your battery:
1 Fit a battery onto your phone.
2 Attach the correct adapter plug to the travel charger.
3 Connect the travel charger to the phone.
About Your Phone, Battery and SIM Card
17
ST210_EN.BK Page 18 Thursday, May 11, 2000 2:56 PM
Desktop Charging Your Battery
AThe Desktop Charger is an optional accessory that allows
you to charge both the battery fitted in your phone and a
spare battery at the same time.
AIt is normal for batteries to become warm during charging.
1 Connect the travel charger to the desktop charger socket.
(The connector is keyed and can only be inserted one way.)
2 Plug the travel charger into a 110V AC electrical outlet.
3 Insert your phone into the desktop charger.
A spare battery can be charged on its own or at the same time as
your phone. Insert the battery into the desktop charger.
Battery Indicators
Your Motorola cellular phone includes the Motorola Expert
Performance (¢) charging system. This enables the charging
circuits in both the phone and the optional (¢) desktop
charger to communicate directly with the battery. Based on this
communication, the charger can implement the optimum
charging cycle for best performance and determine the level of
charge.
Your phone monitors and displays information about your
battery. The following message will appear on the display, as the
condition occurs:
Low Battery
The battery charge is low. The battery should
be recharged.
Insert
Battery
No battery fitted; external power connected
Invalid
Battery
This message is accompanied by a single beep.
Your phone is alerting you that you do not
have charging capabilities with this battery
even though the battery may be able to power
the phone.
The most likely reason why your charging
system does not recognize the battery is that
the battery you have purchased is not a
Motorola original battery and therefore does
not have the communications technology built
into it. All Motorola original batteries include
this communications technology.
It is recommended that you use only Motorola
original batteries, chargers and other
accessories.
18
About Your Phone, Battery and SIM Card
ST210_EN.BK Page 19 Thursday, May 11, 2000 2:56 PM
Battery Meter Indicators
The battery meter displays different messages depending on the
batteries attached, and whether or not there is an external power
source. The battery meter is found in the Call Related Features
part of the Options Menu.
Charging
Battery
The battery is being charged.
Fast Charge
Complete
Fast charging is complete.
Invalid
Battery
Battery may be defective, or may not be a
Motorola original battery.
About Your Phone, Battery and SIM Card
19
ST210_EN.BK Page 20 Thursday, May 11, 2000 2:56 PM
Your SIM Card
Your SIM (Subscriber Identity Module) card was supplied by your
Service Provider when you bought your phone. You will not be
able to make or receive calls if you do not have a SIM card
inserted in your phone.
4 Insert the SIM card into the holder as shown. The SIM card
should be inserted with the notch at the top and facing
toward the base of the phone.
ASome networks allow you to make 911 emergency calls
without a SIM card inserted.
The SIM card is a ‘Smart Card’ that contains your phone number,
service details and memory for storing Phone Book numbers and
messages. You can therefore use your SIM card in someone else’s
GSM phone and you will be charged for the call.
Like a bank or credit card, you should keep your SIM card secure.
Do not bend or scratch your card and avoid exposure to static
electricity or water.
! Switch off your phone before inserting or removing the
SIM card. Failure to do so may damage the memory on
your SIM card.
SIM Card Insertion/Removal
1 Switch off your phone by pressing and holding the S key,
remove the battery cover and the battery.
2 Slide the SIM holder toward the right and lift up the left side
of the holder.
3 Remove the SIM card from the holder if necessary.
5 Replace the holder and press and slide it to the left to lock it
into place.
6 Replace the battery and battery cover.
If the SIM card is inserted the wrong way, or damaged, the
Check Card message may be displayed. Remove the SIM card
and then properly re-insert it into the phone.
If either of the Bad Card See Supplier or Blocked
Supplier messages are displayed, then you will need to
contact your Service Provider.
20
About Your Phone, Battery and SIM Card
See
ST210_EN.BK Page 21 Thursday, May 11, 2000 2:56 PM
Making and Receiving Phone Calls
Switching the Phone On and Off
Press S to turn the phone on; press and hold S to turn the
phone off. If VibraCall™ is selected, the phone will vibrate when
it is switched on.
If you switch the phone on and there is no SIM card inserted, you
will be asked to insert one. Once inserted, the phone will check
that the SIM card is valid.
A number of messages will then be displayed:
•
Enter PIN
- a request to enter the SIM card PIN code (if
required).
•
Enter Phone Unlock Code
The PIN code can be changed; see ‘Change SIM PIN Code’ in the
Phone Setup Menu section for more details.
j Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock
you must enter your unlocking code by entering
BO.
Code
- a request to enter the
phone unlock code (if required).
•
! If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock up and the
Blocked message will be displayed. See ‘Unblocking
Your Phone’ for details on unblocking your phone.
followed by a network name - as the phone
searches and then finds a suitable network to connect to.
Searching...
Entering Your SIM Card PIN Code
To enter the PIN code, enter AO.
As you type in each digit of the PIN code a * character will be
displayed.
The unlock code is a four digit number which is set by Motorola
to 1234. The code can be changed; see ‘Change Unlock Code’ in
the Phone Setup Menu section for more details.
If you forget your unlock code, press the $ key. This will
display the ‘Change Unlock Code’ option. Enter O
D, enter a new unlock code, and press O.
If you make a mistake, press and release the C key to remove
the last digit. Holding the C key down will remove the entire
entry.
When the PIN code is complete press the O key.
If the PIN code entered is incorrect, the warning message Wrong
PIN will be displayed, followed by Enter PIN.
Making and Receiving Phone Calls
21
ST210_EN.BK Page 22 Thursday, May 11, 2000 2:56 PM
Making a Phone Call
To make a phone call, your phone must be switched on and
unlocked.
It will not be possible to make a phone call unless you are in an
area where there is GSM1900 service. When service has been
found, a series of rising bars, x, will show the signal
strength.
There are a number of different ways to make a phone call:
• Using the digit keys.
• Using automatic redial.
• Redialing the last number called.
• One-touch dialing a Phone Book entry*.
• Dialing a Phone Book entry*.
• Calling an embedded number in a message.
• Using the smart button (=) and Voice Control.
A*Your phone contains a 'phone book' that can be used to
store names and telephone numbers. See ‘What is the
Phone Book?’ for further details.
Keypad Digits
The simplest method of making a phone call is to enter the
number using the digit keys then press O.
AIf you make a mistake, press and release the C key to
remove the last digit. Holding the C key down will
remove the entire number.
Your phone will then attempt to make the phone call. The display
will show Calling to show the call attempt is being made. If
the call is not answered, pressing O, or closing the phone, at
this point will end the attempt.
When the phone call is answered, the display will change to
Connected for a few seconds, followed by End Call?.
To end your call press O, or close the phone.
Automatic Redial
If your call attempt does not succeed, the message Redial? will
be displayed for five seconds. Pressing O at this point will
automatically redial the phone number.
When the call is answered, you will hear a short ring tone.
The maximum number of redial attempts is set by your Cellular
Service Provider. If the phone call cannot be connected within
this maximum, the message Redial Failed will be shown.
22
Making and Receiving Phone Calls
ST210_EN.BK Page 23 Thursday, May 11, 2000 2:56 PM
Redialing the Last Number Dialed
i When in standby mode, press OO.
Alternatively, you can retrieve the last number dialed using the
‘Last Ten Calls’ feature in the Phone Book menu.
j One-Touch Dialing Phone Book Numbers
To quickly retrieve and dial a number stored in the first nine
locations of your Phone Book*, press and hold the appropriate
digit key. For example, pressing and holding 2 will dial the
phone number stored in location 2 of your Phone Book.
AYou do not need to press O to call the number.
j Dialing Phone Book Numbers
The following smart button (=) options are available:
• Press = and say the Voice Tag name after the tone. See ‘Using
Voice Control’ for more information.
• Press = and use the volume button to scroll to the stored
number, or press the appropriate digit key to skip to a
particular letter. To make the call, either hold down = for 1.5
seconds or press O.
Alternatively, enter the phone book location number followed
by >O.
Calling an Embedded Number in a Message
Details on how to call a number embedded in a message are
given in the Messages Menu section.
International Phone Calls
To make an international phone call press and hold the 0 key.
After a couple of seconds the international dialing prefix + will
appear in the display; this allows you to call from any country
without knowing the local international access code.
Then enter the country code, followed by the phone number.
Press O to dial.
Inserting Pauses Into Phone Numbers
To obtain a three second 'pause' character in a phone number,
press and hold the < key for a couple of seconds; the pause
symbol Ü will appear.
The pause character produces a three second delay whenever it is
used. However, the first pause character in a phone number is a
special case; it will not begin its delay until the call is answered.
Pause - A Working Example.
If, for example, you have a tone-based voicemail system on
555-6911, with a mailbox number 1066 and password 2001.
Then you may dial the following number:
5556911Ü1066Ü2001O.
The first part of the number would be used to call the voicemail
system.
When the call is answered the first pause will produce a delay of
three seconds before the tones for 1066 are sent to select the
mailbox.
There will be a second pause of three seconds before the tones
for 2001 are sent as the password.
* The Phone Book entries that you are able to access will depend on the
One-Touch Dial Setting option in the Phone Book menu.
Making and Receiving Phone Calls
23
ST210_EN.BK Page 24 Thursday, May 11, 2000 2:56 PM
Emergency Calls*
When you dial 911, your phone will automatically send an
emergency message to your GSM 1900 network. Keep in mind
that you must be within a GSM 1900 network coverage area. If
allowed by the Service Provider, the emergency message can be
sent with or without a SIM card inserted into the phone and
regardless of any security code settings.
Please check with your network operator for further information
regarding emergency dialing services.
To dial the emergency number, press 911O.
While the emergency call is being made and connected, the
display will show Emergency.
AYou may also be able to dial 112, the international
emergency number, to place emergency calls.
Receiving a Phone Call
To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is service.
• Your Call Forwarding and Call Barring settings should not be
set to forward or bar incoming calls.
When your phone receives a call, it will ring or vibrate. To answer
a call, extend the antenna, then open the phone.
If you wish to open the phone without answering calls, set Key
Answer Only to On. Then, if your network offers Caller Line
Identification and you are a subscriber, you can open your phone
to review the number or name of the caller before you answer. To
answer a call with Key Answer Only activated, press O, 1
through 9, or >. To reject the call, press C.
Your phone automatically searches your Phone Book for the
caller’s number. If the number matches an entry in your Phone
Book, the name associated with the number is displayed instead.
To answer the call, press O. If Key Answer
you can also press 1 through 9 or >.
Only
is active,
If your phone is open and you do not want to answer the call,
you can:
• Press and release C.
The caller is either sent to a forwarding number (see 'Detailed
Forwarding’) or hears a busy tone.
or
* Network and subscription dependent feature. Not available in all areas.
24
Making and Receiving Phone Calls
• Press and hold C. This will reject the incoming call. No call
forwarding option will be offered in this case.
ST210_EN.BK Page 25 Thursday, May 11, 2000 2:56 PM
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed the next time you open
the phone, so that you know someone tried to call you.
AIf you subscribe to CLI, you can view the names or numbers
of your unanswered calls in the Last 10 Calls Received list.
Ending a Phone Call
To end a phone call, press O, C or close phone.
Making and Receiving Phone Calls
25
ST210_EN.BK Page 26 Thursday, May 11, 2000 2:56 PM
In-Call Menu
The “In-Call” menu provides access to additional functionality
during a call.
Entering the In-Call Menu
The “In-Call” menu is accessed by pressing the $ key during a
call.
Leaving the In-Call Menu
To leave the “In-Call” menu press the C key.
In-Call Menu Options
The options listed in the “In-Call” menu will dynamically change
depending on the current call state. The following list contains all
of the possible options in the “In-Call” menu.
AOnly some of the options will appear at any given time. The
order of the options may vary.
Handsfree On/Off
This option is used to switch between Handsfree and normal
operation if the phone is installed in a car kit that does not have
an automatic presence detector.
Hold Call
This option will put the active call on hold.
Make a New Call
This option allows you to make another call.
Restrict My Number
This option allows you to make a call without the remote user
getting advanced warning of the number.
End Active Call
This option terminates the active call, and makes the call that was
previously on hold, the active call.
26
Making and Receiving Phone Calls
ST210_EN.BK Page 27 Thursday, May 11, 2000 2:56 PM
End Held Call
This option will terminate a held call.
End Active And Held
This option will terminate all connected calls.
Switch
This option allows you to switch between the active call and the
call that is on hold.
Conference Call
This option connects you with up to five other telephones on one
call (see ‘Making a Conference Call’).
Transfer Call
This option transfers a call to another telephone (see ‘Transfer
Call’ later in this section).
Split Call
This option allows you to separate an individual from the main
Conference Call.
Reject Waiting Call
This option will reject a waiting call.
Reconnect
This option will make the call on hold the active call.
Reconnect Held Call
This option is similar to Reconnect but will appear if you have a
call on hold, and a call waiting. Reconnect Held Call will
make the call on hold the active call.
Turn Mute On or Off
Temporarily turns the microphone off during a phone call.
Reselect this option to resume your conversation.
j Call
Holding and Call Waiting
Your phone supports the GSM options of Call Holding and Call
Waiting. Using these options you can place a current phone call
on hold and accept an incoming call or start a second call (See
‘Call Waiting’ in the ‘Call Related Features’ menu for details
of how to control this feature).
Call Waiting
If Call Waiting is On, you will be notified of an incoming call by an
audible alert and by the message Call Waiting - Answer?.
• To accept the incoming call, press O. The other caller will
automatically be placed on hold.
• To reject the incoming call, press C or press $ and select
Reject Call Waiting.
If you would like to end the active call first, press $ and select
End Active Call?. The phone will then ring and can be
answered normally.
AIf you have CLI, the caller’s information will be displayed
instead of the Call Waiting message.
Call Holding
If you would like to put an active call on hold to make another
call, press $ and select Call Hold. Then press $ again
and select Make New Call.
• To end a held call, press $ and select End
Held Call.
Switching Between Calls
Pressing O will switch you between the active and held calls.
The other caller will automatically be placed on hold.
AClosing the phone will end both the active and held calls.
Making and Receiving Phone Calls
27
ST210_EN.BK Page 28 Thursday, May 11, 2000 2:56 PM
Making a Conference Call
With Conference Call, you can have a conference with up to five
other phones to create a group call. At any time during your call,
you can add, disconnect or separate individuals from the
Conference Call using other “In-Call” menu options.
AYou must subscribe to both Conference Call and Call
Waiting Supplementary Services to be able to use this
feature.
Setting Up a Conference Call
To set up a conference call, place or receive a call as you normally
would. Once the call is established, press $ and scroll to Make
New Call. Press O to select.
You will then be prompted for the phone number of the next
party. You can either enter the number with the keypad or recall
a number from your Phone Book.
The original call will be placed on hold automatically while you
make the new call. Once the new call is established, you can join
the calls by pressing $ and selecting Conference Call.
You may also add incoming calls by answering Call Waiting and
selecting Conference Call as described above.
Simply repeat these steps to include additional calls.
28
Making and Receiving Phone Calls
Separating Out Individual Calls
If you need to speak with an individual caller privately, you can
isolate one call from the conference call.
AIn order to separate a call from the group, there must not
be any calls already on hold.
To isolate the call, press $ and select Split Call. You will
then be able to scroll through the phone numbers of all the
members of the conference call. If you have stored any of the
numbers in your Phone Book, the name will also appear. Once
you find the caller to isolate, press O.
To rejoin the group, select Conference
Call
again.
Ending the Call
Close the phone to end all calls simultaneously.
Press $ then scroll to either End Active Call to
disconnect your live call or End Held Call to disconnect
whoever is on hold, whether an individual or the remaining
group.
ST210_EN.BK Page 29 Thursday, May 11, 2000 2:56 PM
Security Features
You may find that you are prompted to enter certain security or
access codes before you can use your phone or some of its
features. These codes are:
• PIN Code (SIM card PIN code).
Prevents access to your SIM card. The number is supplied by
your Service Provider. Your SIM card will be blocked if three
unsuccessful attempts to enter this number are made.
• PIN2 Code.
Prevents access to certain advanced features. The number is
supplied by your Service Provider.
• Phone Unlock Code.
Protects your phone from unauthorized use. The default code
set by Motorola is 1234.
• Unblock Code.
Unblocks your SIM card if it has been blocked by three
unsuccessful attempts to enter the PIN code. The number is
supplied by your Service Provider.
• Security Code.
Prevents access to security features. The default code set by
Motorola is 000000.
Making and Receiving Phone Calls
29
ST210_EN.BK Page 30 Thursday, May 11, 2000 2:56 PM
Transfer Call*
Transfer Call transfers a call to another telephone. There are two
ways to transfer a call: before or after the third party is
connected.
AYou must subscribe to both Conference Call and Call
Waiting Supplementary Services to be able to use this
feature.
Initiating Transfer Call Before the Third Party Is
Connected
AFor example, you are talking to “Judy” and wish to transfer
her to “Amy”–who is not involved in the call yet–and then
remove yourself from the call.
To transfer a call to another telephone, press the $ key and
select Transfer Call from the “In-Call” menu. Enter the
number where the call will be transferred and press O.
Your phone will then attempt to transfer the call. The display will
show Transferring Call followed by Call
Transferred. When the call has been successfully transferred,
you will be disconnected automatically.
* Check with your GSM 1900 Service Provider for availability of
Call Transfer
30
Making and Receiving Phone Calls
Initiating Transfer Call After the Third Party Is
Connected
AFor example, you are talking to “Judy” and answer a call
waiting which is “Amy.” You wish to transfer “Judy” to
“Amy,” and remove yourself from the call.
If you already have an active call and a call on hold, press the
$ key and select Transfer Call from the “In-Call” menu.
Your phone will then attempt to transfer the active call to the call
on hold. The display will show Transferring Call followed
by Call Transferred. Once the call has been successfully
transferred, you will be disconnected automatically.
ST210_EN.BK Page 31 Thursday, May 11, 2000 2:56 PM
Call Holding and Call Waiting Messages
During Call Holding and/or Call Waiting operations, your phone
may display one or more of the following messages:
Trying
A request to hold the active call, swap the active with a held
call, or add a member to a Conference Call, has been made.
or
A request to reconnect the held call has been made.
Hold Failed
The request to hold a call has been unsuccessful.
Cannot Hold Second Call
A call is already on hold, you cannot place two calls on hold at
the same time.
Connection Failed
The held call could not be made active again.
Busy Try Later
Your phone is still working on a previous command. Wait a
short time before repeating the command.
Anonymous
The person who is calling you has blocked their number from
appearing on your phone.
Unavailable
The network is unable to provide the caller’s number.
Conference Unsuccessful
The request for Conference Call has been unsuccessful.
Transferring Call
A request to transfer a call has been made.
Transfer Unsuccessful
The request to transfer a call has been unsuccessful.
Making and Receiving Phone Calls
31
ST210_EN.BK Page 32 Thursday, May 11, 2000 2:56 PM
32
Making and Receiving Phone Calls
ST210_EN.BK Page 33 Thursday, May 11, 2000 2:56 PM
Using Voice Features
Using VoiceNotes
The VoiceNotes feature allows you to record up to 3 minutes of
personal voice messages or to record part of a phone call. This is
useful when you don't have a pen and paper handy for taking
directions or a message. Recording is available during the
following call scenarios:
• Phone idle (no calls).
• Single active call (includes conference calls).
• Active call plus waiting call.
Recording a VoiceNote
To record a VoiceNote, press the Start/Stop Record button (?).
You will hear a short tone to indicate that recording has started
and the display will show the message Recording and the
remaining recording time available.
If you are recording during a call, the person you are speaking to
will hear a tone every 10 seconds to warn them that you are
recording the call.
ADuring the recording of an active call, only the person you
are talking to is recorded.
To stop recording a call, press the Start/Stop Record button (?) or
O; on models with a flip you can also close the flip, although
this will end the call. The display shows the message VoiceNote
XX Stored where XX is the number of the storage location.
VoiceNotes are stored in sequential locations.
Recording stops immediately with no further notification if:
• you choose to accept an incoming call while you are recording
(the Call Waiting alert is played)
• you choose to initiate a call during recording a VoiceNote.
VoiceNote Storage Capacity
The ‘Show Time Available' option in the Messages, VoiceNotes
menu displays the amount of recording time available, see
‘Messages Menu’.
During recording, ten seconds before the recording capacity is
reached you will hear a warning tone. If you do not stop
recording within the time limit, recording will automatically stop
and a single, one second tone will be heard, accompanied by the
Storage Full message.
Playing VoiceNotes
To play your VoiceNotes, select the ‘Play VoiceNotes' option in
the Messages, VoiceNotes menu or the Quick Access menu
item (}).
The first VoiceNote will begin to play after two seconds. The
display will show VoiceNote XX playing... Go to next?
Press C to stop playing a VoiceNote. A message showing the
current VoiceNote is displayed (VoiceNote XX), together with a
prompt Go to next?. Press $ and then < or > to skip
to the next VoiceNote.
AIf you selected ‘Play VoiceNotes' from the Quick Access
Menu, the phone will simply return to its idle state.
Using Voice Features
33
ST210_EN.BK Page 34 Thursday, May 11, 2000 2:56 PM
If you press $ and then < or > (top) during playback,
the message will start to replay from the beginning. Press < or
> (top) twice rapidly to skip back to the previous message.
Press $ to play the next VoiceNote. To skip to the next
VoiceNote during playback, press O.
To play a VoiceNote stored at a specific location, press the
appropriate digit key 1 to 9.
AIt is not possible to play back VoiceNotes during a call.
Erasing VoiceNotes
To erase your VoiceNotes, select the ‘Erase All VoiceNotes' option
in the Messages, VoiceNotes menu. You will be requested to
confirm the deletion with the message Erase All VoiceNotes
- Select?. Press O to confirm the deletion.
The confirmation message VoiceNotes
Erased
AYou cannot erase individual VoiceNotes.
34
Using Voice Features
is displayed.
ST210_EN.BK Page 35 Thursday, May 11, 2000 2:56 PM
Using Voice Control
With Voice Control, you can call up a phone number or activate a
Quick Access feature with a single spoken command.
The single spoken command is called a Voice Tag.
You can assign Voice Tags to call any of the Phone Book numbers
in your phone memory, and you can also assign Voice Tags to
activate any of the Quick Access features.
When you select ‘Add To Phone Memory, your phone prompts
you to enter a number, name and location and then stores the
entry. For more details, see The Phone Book Menu.
AYou cannot assign Voice Tags to call any of the numbers in
your SIM card memory.
After the prompt Stored
a Voice Tag as follows:
When you are recording a Voice Tag, you cannot make or receive
any calls.
1 u Add
Add Voice Tag
This option is available from the Phone Book menu and allows
you to add a Voice Tag to a new Phone Book entry.
Voice Tag?
If there are already 25 Phone Book Voice Tags in your phone,
Voice Tag Storage Full appears and your phone returns
you to the ‘Add To Phone Memory’ menu option. You must
delete a Voice Tag before you can add another.
Voice Control for Phone Book Entries
AYou cannot record a Voice Tag if you have set Prevent
Access To Phone Memory.
your phone then prompts you for
Press O to continue.
For best results, when you record a Voice Tag, make sure there is
no background noise and speak in a clear, natural voice. Your
phone allows you about two seconds for each Voice Tag.
You can add a new Voice Tag when you set up a new Phone
Book entry or when you amend an existing Phone Book entry.
Alternatively, you can overwrite an existing Voice Tag or delete it
completely.
XXX,
If there are Voice Tags available, your phone prompts you to:
2 u Press
OK When Ready
Press O to continue.
3
Say Name After Tone...
Wait for the tone to finish and then say the name.
Sometimes Repeat Name
repeat this operation.
After Tone...
prompts you to
4 If the recording is successful, Please Wait appears after two
seconds followed by y Voice Tag Stored.
Using Voice Features
35
ST210_EN.BK Page 36 Thursday, May 11, 2000 2:56 PM
When a Voice Tag recording is successful, your phone returns you
to the ‘Add To Phone Memory’ menu option.
To complete the Voice Tag recording, follow the same process as
for ‘Add Voice Tag’.
If the recording is not successful, for example, the name you used
is too similar to another Voice Tag name, the phone displays the
reason for not accepting the name and returns you to the
u Press OK When Ready prompt.
Delete Voice Tag
AThis option does not appear if the phone number is not in
phone memory or if there is no Voice Tag to delete.
Add or Edit Voice Tag and Delete Voice Tag
These options are available from the Phone Book menu or the
Quick Access menu. First, select either ‘Find Entry by Name’ or
‘Find Entry by Location’.
After you enter the name or location details, you can select the
appropriate Voice Tag menu option.
’.
Add or Edit Voice Tag
AThis option does not appear if the phone number is not in
phone memory.
Select this option to add a Voice Tag to the Phone Book entry or
to overwrite an existing Voice Tag. If an entry already has a Voice
Tag, the symbol )) appears after the location number.
When you select this option, the phone prompts you with
u Press OK When Ready.
36
Using Voice Features
Select this option to delete the Voice Tag from the Phone Book
entry.
When you press O, the phone deletes the Voice Tag and
returns the prompt y Voice Tag Deleted.
ST210_EN.BK Page 37 Thursday, May 11, 2000 2:56 PM
Using Voice Activation with Phone Book Entries
You can use either the smart button (=) or you can use the
Phone Book menu followed by =.
Voice Activation using the smart button (=)
Press =.
Voice Control for Quick Access Features
You can use Voice Tags to activate any of the Quick Access
features on your phone. You are not restricted to the nine Quick
Access keys.
Quick Access Setup
If there is a Phone Book entry with a Voice Tag, the following
prompt appears:
1 Say Name After Tone...
Wait for the tone to finish and then say the name.
AIf you press a key, you return to the Phone Book.
If the phone does not find a matching Voice Tag, No
appears and you return to the Phone Book.
Match
Found
2 If the name you say matches a Voice Tag, the phone repeats
the name and displays the Phone Book entry.
3 Do one of the following:
• Wait for two seconds and the phone makes the call.
• Press O to make the call or C to cancel the call.
• Press < or > to display the next entry in the Phone
Book.
When you scroll to a Phone Book entry that has a Voice Tag, your
phone replays the Voice Tag through the speaker.
Voice Activation using the Phone Book Menu
Select Voice Dialing from the Phone Book menu.
When you press O, the phone displays the message
u Press Smart Button When Ready .
To complete the voice activation, follow the same process as for
‘Voice Activation using the smart button (=)’.
This option is available from the Phone Setup menu and allows
you to do the following:
• Customize your Quick Access menu.
• Set up and change the Voice Tag allocation for the Quick
Access features.
When you select Quick Access Setup, your phone displays a list of
the Quick Access features. If a feature already has a Voice Tag,
the symbol )) appears with the feature name.
Use < or > to highlight the feature you require and then
press O. You can then assign a key or change the Voice Tag
setup.
Assign Key to Feature
Select this option to assign a key to the Quick Access feature.
Your phone displays the prompt Enter 1-9:.
Press 1 to 9 to assign a key and then press O.
If you assign a valid key, your phone displays y Completed and
then returns you to the Quick Access feature list.
Using Voice Features
37
ST210_EN.BK Page 38 Thursday, May 11, 2000 2:56 PM
As an alternative, you can also assign a key using the Quick
Access key (E). See Using the Quick Access Menu.
Add or Edit Voice Tag
Select this option to add a Voice Tag to the Quick Access feature
or to overwrite an existing Voice Tag.
If you attempt to add another Voice Tag when there are already
15 Quick Access Voice Tags in your phone, Voice Tag Storage
Full appears and your phone returns you to the Quick Access
feature list. You must delete a Voice Tag before you can add
another.
If there are Voice Tags available, your phone prompts you to:
1 u Press
OK When Ready
Press O to continue.
2
Say Name After Tone...
Wait for the tone to finish and then say the name.
Sometimes Repeat Name
repeat this operation.
After Tone...
prompts you to
3 If the recording is successful, Please Wait appears after two
seconds followed by y Voice Tag Stored.
When a Voice Tag recording is successful, your phone returns you
to the Quick Access feature list.
If the recording is not successful, for example, the name you used
is similar to another Voice Tag name, the phone displays the
reason for not accepting the name and returns you to the
u Press OK When Ready prompt.
38
Using Voice Features
Delete Voice Tag
AThis option does not appear if there is no Voice Tag to
delete.
Select this option to delete the Voice Tag from the Quick Access
feature.
When you press O, the phone deletes the Voice Tag and
returns the prompt y Voice Tag Deleted.
ST210_EN.BK Page 39 Thursday, May 11, 2000 2:56 PM
Using Voice Activation with Quick Access Features
To activate a Quick Access feature using Voice Control:
1 Press E.
If there is a Quick Access feature with a Voice Tag, the following
prompt appears:
2 Say Name After Tone...
Wait for the tone to finish and then say the name.
AAt this point, you can press C to return to the idle
screen; press a numeric key or O to activate the
appropriate Quick Access feature; press < or > to
display the Quick Access menu list.
If the phone does not find a matching Voice Tag, No Match
Found appears and you return to the Quick Access menu.
3 If the name you say matches a Voice Tag, the phone repeats
the name and displays the entry for the Quick Access feature.
4 Do one of the following:
• Wait for two seconds and the phone activates the feature.
• Press O to activate the feature or C to return to the
Quick Access menu list.
• Press < or > to display the next entry in the Quick
Access menu.
When you scroll to a Quick Access feature that has a Voice Tag,
your phone replays the Voice Tag through the speaker.
Using Voice Features
39
ST210_EN.BK Page 40 Thursday, May 11, 2000 2:56 PM
40
Using Voice Features
ST210_EN.BK Page 41 Thursday, May 11, 2000 2:56 PM
Using the Options Menu
Network and subscription dependent feature.
Not available in all areas.
Using the Options Menu
41
ST210_EN.BK Page 42 Thursday, May 11, 2000 2:56 PM
Access Internet
AAccess Internet is a network and subscription-dependent
feature. Contact your service provider for details about the
mobile internet services based on the WAP (Wireless
Application Protocol) technology that they provide.
Common Display Features
Your service provider determines the layout and information that
appears on the display. This example display illustrates a typical
mobile internet screen and the soft keys you use to select and
navigate through options.
Menu Title
1> Option 1
2> Option 2
3> Option 3
[Icon] Softkey1 Softkey2
Your phone has mobile internet access. This allows you to use the
mobile internet services available from your service provider; for
example, financial, sports, travel, and entertainment information
services.
This section explains:
• some of the common display features
• how to set up your phone for mobile internet access
• how to start a mobile internet session
• how to use and end the mobile internet session
Using the Main Menu
To display the Main Menu, press and hold $ until the Main
Menu appears. You can access the Main Menu only during a
mobile internet session. Then scroll up or down to highlight the
appropriate menu option and press O to select it. The Main
Menu includes special commands, for example:
Help:
Home:
Mark site:
Setup:
42
Using the Options Menu
provides help, if available, for the previouslyhighlighted option.
returns you to your home page provided by your
service provider.
allows you to add a site to your Bookmarks folder.
contains the options to set up your mobile
internet access.
ST210_EN.BK Page 43 Thursday, May 11, 2000 2:56 PM
Using Bookmarks
Select Mark Site from the Main Menu. When your phone
prompts you for a bookmark, press any key from 1 to 9. A
Stored XXX message confirms that the bookmark key is set. To
return to the bookmark during a mobile internet session, press
and hold the appropriate key.
Using the Soft Keys
To select a soft key from the display during a mobile internet
session, press O or $. The soft keys change so that they are
appropriate for the current display, for example, Quit, OK, Back,
or View. In the second example display, $ selects softkey1
and O selects softkey2.
Mobile Internet Icons and Messages
Icon or Message
Description
Sending ))))))
Sending data to the internet.
Receiving ((((((
Receiving data from the internet.
Connecting....
Connecting to the internet.
Working....
Performing an internet activity.
[struck out key
symbol]
Non-secure internet connection.
AThe internet service you receive determines the icons and
messages that appear in the display.
Setting Up for Mobile Internet Access
AYour service provider may set up your mobile internet access
automatically.
To set up your mobile internet access manually, you will need the
following information:
• Primary Data Gateway: this is the IP address of the gateway
through which you will access the mobile internet. The IP
address is in the format 123.456.789.123.
• Phone Number: this is the number that your phone will call to
access the internet; your Internet Service Provider (ISP) issues
this number.
• User Name: this is your user name, provided by your ISP.
• User Password: this is your password, provided by your ISP.
• Baud Rate: this is likely to be 9600, the standard data rate for
GSM phones.
• Idle Time Out: this is the time the phone will wait before
hanging up if it detects no internet activity; usually 600
seconds; maximum 1000 seconds.
• Line type: this is the type of call you make to your ISP, either
modem or ISDN.
• Connection Type: this is either Non-Transparent or
Transparent, depending on your service provider.
Also ensure that your mobile phone number shows when you
select the menu option My Phone Number(s), under the Phone
Book Main Menu. This could be used as your account number by
the Primary Data Gateway. If your number is not shown, add it by
following the instructions in My Phone Number(s).
Using the Options Menu
43
ST210_EN.BK Page 44 Thursday, May 11, 2000 2:56 PM
Select the menu option Access Internet and press the O
key. Press and hold the $ key until the Main Menu appears.
Scroll down through the options to 6> Setup and press O
key. Enter the information listed above at the appropriate menu
item by first selecting the item and choosing the softkey to edit it
as necessary.
When you have entered all the appropriate information, exit the
Main Menu by pressing the C key repeatedly. Turn your phone
off and then on again to make sure you register all changes. You
will then be ready to start a mobile internet session.
Starting a Mobile Internet Session
i Press E. Select the Quick Access feature or after the
tone, say the Voice Tag name.
The menu option Access
session.
Internet
starts a mobile internet
When you start a mobile internet session, you will see the
messages Connecting..., Sending )))) and Receiving
(((( before your home page appears. Typically, an ISDN
connection will take approximately 10 seconds and a modem
connection will take 30 seconds.
Using the Mobile Internet Session
Selecting Options Within a Mobile Internet Session
If the Internet page has a list of menu options, scroll up or down
to highlight the appropriate menu option and then press O to
select it. Press C to return to the previous screen.
When the text for a menu option is too wide for the screen, the
phone uses two screens and repeats each half of the menu list
until you make a selection.
Editing Text Within a Mobile Internet Session
You edit text in a mobile internet session in a similar way to
editing text in all other phone functions, but you can use softkeys
to enter symbols and numbers easily. See Entering Text on Your
Phone.
Making and Receiving Calls During a Mobile Internet
Session
To make a call, you must end the mobile internet session and
make your call in the normal way.
Voice calls cannot be received during an on-line mobile internet
session. An on-line session is indicated by the k (In Use) icon. If
you receive a call during a Mobile Internet Session the call will be
forwarded (See Call Forwarding).*
If you receive a call during an off-line Mobile Internet Session (the
k (In Use) icon is not displayed) your phone prompts you to
Answer?. Press O to accept the call or press C to reject it.
* Availability of this feature depends on your service provider
44
Using the Options Menu
ST210_EN.BK Page 45 Thursday, May 11, 2000 2:56 PM
If you answer the call, WAP Session Paused - Resume?
appears when you end the call. Press O to resume your mobile
internet session or press C to return to the idle phone display.
Internet Service Alerts
You do not need to be using the mobile internet to receive an
internet service alert. If you receive an alert, your phone:
• emits an alert tone (depending on the ‘Ringer On or Off’
setting)
• displays a pop up screen with appropriate alert details.
Press O to display the contents of the alert or press C to
reject it.
Ending a Mobile Internet Session
Press the C key repeatedly until the Internet home page
appears. Press C again to end the mobile internet session.
You can also press the smart key to end the mobile internet
session. This immediately returns you to the idle phone display.
Summary of Keys Within a Mobile Internet Session
Key action
Effect in mobile internet
Press $
Selects the first soft key
(softkey1 in the example).
Press O
Selects the second soft key
(softkey2 in the example).
Press and hold
Displays the mobile internet
menu.
$
Effect in text editor*
Press =
Ends the mobile internet
session.
Press C
Takes you back to the
previous screen.
Deletes the character in
front of the cursor.
Press C
repeatedly
Takes you back to the
internet home page.
Deletes all the characters
in the edit area.
Press C
again
Ends the mobile internet
session.
Press
1...9
Selects a menu option in a
list.
Inserts an alphanumeric
character.
Press and hold
1...9
Takes you to a bookmarked
page.
Changes the case for the
next alphanumeric
character.
Press < or
Takes you up or down
through a list of menu
options.
Moves the cursor one
position to the left or one
position to the right.
>
* For full details, see ‘Entering Text on Your Phone’.
Using the Options Menu
45
ST210_EN.BK Page 46 Thursday, May 11, 2000 2:56 PM
Accessing MyMotorola.com
The My Motorola option on the mobile internet menu allows
you to go directly to the MyMotorola.com web site.
Go to MyMotorola.com today!
MyMotorola.com is a powerful, free tool that allows you to get
the most from your phone.
To access the power, simply go to http://www.mymotorola.com
and register. Complete the ‘Join Now’ registration form with
some information about yourself and your phone to access
support tools, personal information tools and a list of WML web
sites that work great on your new phone.
By downloading TrueSync™ software and going to
http://www.mymotorola.com you can keep your phone, your
desktop organizer and your web-based address books
synchronized and keep them instantly up-to-date and accessible.
You can enjoy the freedom of accessing your personal data from
your phone, wherever you are. You can also access
MyMotorola.com from any personal computer with an Internet
connection, anywhere in the world.
MyMotorola.com gives you the power to take your world
with you:
The power to be efficient. Enter information once - access and
update your personal mobile organizer information, anywhere.
The power to stay informed. View your mobile bookmarks:
the mobile Internet sites of your choice, for business or for
pleasure, customized for your phone.
46
Using the Options Menu
The power to relax. Enjoy exclusive access to games, giveaways and prizes. Explore your personal, mobile entertainment
options and have fun with your friends.
Take your world with you. Visit MyMotorola.com today.
ST210_EN.BK Page 47 Thursday, May 11, 2000 2:56 PM
The Phone Book Menu
>
AIf your service provider has added their own menu, the
Phone Book menu will not be the first item in the Options
menu.
Using the Options Menu
47
ST210_EN.BK Page 48 Thursday, May 11, 2000 2:56 PM
j What Is the Phone Book?
You can store names along with telephone numbers in your
phone’s internal Phone Book. Each entry is stored in a memory
location in the Personal Numbers list of your phone’s or SIM
card’s memory. Once stored, a number can be quickly retrieved
by either memory location or name.
Your Phone Book storage capacity is as follows:
Phone Memory
SIM Card Memory*
100 entries
Up to 155 entries
Fixed dial numbers
None
40 entries
Phone number digits
32
20
Name characters
16
10-50
Locations
1-100
101-255
Personal numbers
* SIM card capacity varies depending on the service provider.
To access your Phone Book in alphabetical order, press the smart
button, then use the volume keys or < and > to scroll
through the entries.
To access the Phone Book menu options, press $ twice. You
will see Phone Book. Press O to enter the Phone Book menu,
then use < and > to scroll to the Phone Book menu option
or sub-menu that you wish to use and press O to select it.
AYou can also access many of the Phone Book functions with
the Quick Access Menu.
48
Using the Options Menu
Postscripting
This allows you to make use of area codes and other prefixes
previously stored in your Phone Book when making a call.
To use postscripting, select the Phone Book entry containing the
prefix and then simply enter the rest of the number and press
O to make the call.
You can also use postscripting if you want to call a number
similar to one you have stored in your Phone Book. Retrieve the
number from the Phone Book, delete the relevant digits and then
enter the new number.
APostscripting a number does not overwrite the entry in the
Phone Book.
APostscripting is not available when accessing the Phone
Book using the smart button.
ST210_EN.BK Page 49 Thursday, May 11, 2000 2:56 PM
How to Enter Alphabetic Characters
The 0, 1,... ...,8 and 9 keys are used to enter
alphabetic characters, for example when storing names in the
Phone Book or when creating messages.
For example, if you press the 5 key, the first displayed
character will be J. If this is not the required character, then you
can press the same key again to show K. Another press will
display L, another will display 5. Your phone will continue to
scroll through the characters available on the selected key with
each new key press.
A long press of any of the keys will switch all the characters to
lower case, a second long press will switch back to upper case.
To enter the next character press the appropriate key. If, however,
the next character is on the same key as the previous character
you will first need to press the > key. Pressing the > key a
second time will produce a space.
Available Characters
Press the appropriate keys to get the following characters:
1
1 Space . ? ! ,
2
ë
ë
Ä & : " ( ) ' %
Ä & : " ( ) ' %
$ ®
$ ®
A B C 2 ± È
a b c 2 ± È
3
D E F 3 ¿ ¤
d e f 3 ¥ ¤
4
G H I 4 §
g h i 4 §
5
J K L 5
j k l 5
6
M N O 6 ] ¨
m n o 6 } ¨
7
P Q R S 7
p q r s 7
If a mistake has been made, you can go back to the incorrect
character by pressing <.
8
Characters can be removed from the display by pressing the C
key.
9
The character before the cursor (Ö) is the character which will be
deleted.
0
Press the O key to store the information.
1 Space . ? ! ,
T U V 8 ^ ê
t u v 8 ~ ê
W X Y Z 9
w x y z 9
0 + - x * / = > < #
0 + - x * / = > < #
The top line for each key shows the upper case characters, the
lower line shows the lower case.
Using the Options Menu
49
@
@
ST210_EN.BK Page 50 Thursday, May 11, 2000 2:56 PM
Entering Text on Your Phone
You use the phone keypad (0, 1 to 9) to enter text on
your phone. However, there are three different ways to enter
text:
*iTAP™:
Press a key to generate a character and a dynamic
dictionary uses this to build and display a set of word or
name options. Please note that iTAP™ may not be available
on the phone in all languages.
Tap:
Press a key to generate a character.
Numeric:
The keypad produces numeric characters only. For some
text areas, this is the only method available, for example,
phone numbers.
* For iTAP, see page 65.
This section identifies:
• the characters assigned to each key
• how to select an entry method
• how to use each entry method
Table of Characters
The table of characters identifies the characters assigned to each
key. The top line shows the upper case characters and the lower
line shows the lower case characters.
To change from upper case to lower case, or from lower case to
upper case, press and hold the appropriate key (2 to 9).
AIn iTAP™ mode, the keys 2 to 9 generate standard
letters as predicted by the dynamic dictionary, and the
numbers 2 to 9. 1 generates all the punctuation and
symbols, 0 only generates 0.
50
Using the Options Menu
Selecting a Text Entry Method
You can select a text entry method whenever you need to edit
text, for example:
• in the phone book (Enter
Name, Enter Number)
• in the message editor
• in the mobile internet session
Press $ to display each of the available entry methods. Press
O to select the entry method you require.
AIf iTAP does not support the current language set up for
your phone, then only Tap is available. Your phone displays
Not Available when you press $.
The factory default for the entry method is Tap Mode. However,
you can change the default. See Entry Method Selection in
Phone Setup.
How to Enter Text in iTAP Mode
AOnly available if iTAP supports the current language set up
for your phone.
In iTAP Mode, each key has a number of different characters
assigned to it. When you press a key to start a word, the available
characters appear at the bottom of the display.
ST210_EN.BK Page 51 Thursday, May 11, 2000 2:56 PM
As you add characters, a dynamic dictionary builds and displays a
set of text options along the bottom of the display. iTAP
highlights the first choice text option.
P
Pa
2
7
P S Q R 7
Sa Pc Pa Sc
Par
Pari
4
7
Pari Sari
Par Pas Sas
Paris
7
Paris Scrip
To highlight and add characters to an alternative text option,
press < or >. A left or right arrow on the bottom line
indicates that < or > will display more text options.
When you are ready to add a highlighted word to the main
display area, press O.
Paris
7
iTAP - Locking a Word
You lock a word to give yourself a better selection of text options
or to stop the dynamic dictionary from changing the core text
you are using. The core text can change if you create a word that
is not in the dynamic dictionary.
You can lock a word in two ways:
• Use < or > to highlight an alternative text option (even
if you then return to the original text option). The highlighted
text then forms the basis for all subsequent text options.
• Use C to return to the core text you require. For example
you add p to Scri but iTAP changes the text option to Paris.
If you press C and highlight Pari, Pari is then locked.
iTAP - Punctuation and Upper Case Characters
When you select a word to go into the main display area, iTAP
automatically inserts a space. However, iTAP does not necessarily
add a space if you insert a punctuation character, for example, a
period.
Press 1 to add a punctuation character or symbol.
iTAP automatically adds an upper case character: at the
beginning of a message; at the beginning of a sentence; and at
the beginning of each word in the phone book.
To insert upper case characters at any other time, press and hold
the appropriate key (2 to 9).
Paris Scrip
O
To start adding another word, press the next text key you require.
However, if you have finished editing, select OK?.
iTAP - Adding Numeric Characters
When you press a key, the numeric character assigned to the key
appears as one of the alternative text options. Once you highlight
Using the Options Menu
51
ST210_EN.BK Page 52 Thursday, May 11, 2000 2:56 PM
a numeric character, all subsequent characters are numeric until
you press O.
iTAP - Correcting Text
In iTAP Mode, you can correct the text in the main display area.
You can delete one character at a time or one word at a time.
To move the cursor (l ), press < or >.
To delete the character before the cursor, press C. You can
then insert any new characters you require.
To delete the word before the cursor, press and hold C. If you
continue to press C, you delete the next word, and so on,
until you delete all the words.
iTAP - The Dynamic Dictionary
The dynamic dictionary learns the most recent and the most
frequent words that you use. This includes names and acronyms.
If there are words that you do not use frequently, then the
dynamic dictionary deletes these first to make room for new
words or words that are more frequently used.
The language you specify for the phone determines the dynamic
dictionary that it uses (if there is one is available). See Language
Selection in Phone Setup.
How to Enter Text in Tap Mode
In Tap Mode, each key has a number of different characters
assigned to it. See ‘Table of Characters’. When you press the
same key several times, you scroll through the assigned
characters.
For example, if you press 5, you display the J or j character. If
you press the key again, you display the K or k character, and so
on.
52
Using the Options Menu
To enter the next character, press the next key that has the
character you require. If the next character is on the same key,
you must first press >.
Correcting Text
In Tap Mode, you can delete one character at a time or you can
delete all the text.
To move the cursor (l ), press < or >.
To delete the character before the cursor, press C. You can
then insert any new characters you require.
To delete all the text, press and hold C.
How to Enter Text in Numeric Mode
The keys 0, 1 to 9 produce numeric characters only.
Correcting Text
In Numeric Mode, you can delete one character at a time or you
can delete all the text.
To move the cursor (l ), press < or >.
To delete the character before the cursor, press C. You can
then insert any new characters you require.
To delete all the text, press and hold C.
ST210_EN.BK Page 53 Thursday, May 11, 2000 2:56 PM
Voice Dialing
Select this option to call any phone number that has a Voice Tag.
The phone prompts you to press the smart button (=). See
Using Voice Control.
Personal Numbers
The Personal Numbers sub-menu is used for creating and
managing your list of personal numbers.
Find Entry By Name
i Press = and say the Voice Tag name after the tone. See
‘Using Voice Control’ for more information.
i Press the smart button (=) and use the volume buttons to
scroll to the stored number, or press the appropriate digit
key to skip to a particular letter. To make the call, either
hold down = for 1.5 seconds or press O.
This option is used to select a telephone number from a list of
alphabetically sorted Phone Book names.
Once selected, this option will display the message Enter
Name. You can enter a maximum of three characters from a
name but you do not need to enter all three characters to begin a
search.
The Phone Book entries will be searched and the first
alphabetically matching entry will be displayed.
If there isn’t a name matching your entry, the nearest
alphabetically matching entry will be displayed.
If you do not enter any name information, the first alphabetical
entry will be displayed.
If there are no names stored, No
displayed.
Names Stored
will be
To display adjacent Phone Book entries use the < and >
keys. When the desired name is displayed press the O key to
select it. The phone will now enter the 'Call Number', 'Modify
Name Or Number' or 'Erase Name And Number' options submenu.
Find Entry By Location
i Press = and say the Voice Tag name after the tone. See
‘Using Voice Control’ for more information.
i G>
This option is used to select a telephone number from a list of
numerically sorted Phone Book locations.
Once selected, this option will display the message Enter
You can now enter a location number. If the entered
location is not valid, a timed message Range 1-XXX will be
displayed and the phone will return to the Enter Location
menu item.
Location.
The Phone Book entries will be searched and an entry will be
displayed.
If you enter a location number for which there is no entry,
Location Empty will be displayed and the nearest non-empty
location will be selected instead.
Using the Options Menu
53
ST210_EN.BK Page 54 Thursday, May 11, 2000 2:56 PM
If you did not enter a location, the first numerical entry will be
displayed.
If there are no numbers stored, No
displayed.
Numbers Stored
will be
To display adjacent Phone Book entries use the < and >
keys. When the desired name is displayed press the O key to
select it. The phone will now enter the 'Call Number', 'Modify
Name Or Number' or 'Erase Name And Number' options submenu.
Call Number, Modify Name or Number or Erase Name And
Number Options
Once a Phone Book entry has been selected, it can be called,
modified or deleted.
Call Number
This option is used to call the selected Phone Book telephone
number.
Modify Name or Number
This option is used to change the selected Phone Book entry.
The entry’s current telephone number and name will be
presented, in turn, for modification. You can accept the current
settings or modify as required.
Erase Name and Number
This option is used to erase the selected Phone Book entry.
Simply press the O key when the phone displays the message
Erase Name And Number. The option will display the timed
message Erased XXX and then return to the appropriate menu
item.
54
Using the Options Menu
Add or Edit Voice Tag and Delete Voice Tag
Use these options to add, edit or delete the Voice Tag for the
Phone Book entry. See Using Voice Control.
Add Entry
This option is used to add (store) entries to the Phone Book. You
can choose to add the new entry to either the phone or SIM card
memory locations.
Add To Phone Memory, Add To SIM Card Memory
i Press , to enter Add Entry sub-menu
Press > and O to select either Add
Add To SIM Memory.
To Phone Memory or
Once you have selected the destination, you will be prompted
with the message Enter Number. Enter the number to be
stored and press O. You will then be asked to enter a name.
Press O to confirm your entry. Finally, you will be asked to
enter a memory location.
AThe last telephone number displayed will be presented by
default; it can be used or discarded as required.
ATo discard a number, press and hold C.
If the entered location is not valid, a timed message Range
YYY-ZZZ will be displayed and the phone will return to the
Enter Location prompt. If the chosen location is currently
used by another entry, you will be asked for confirmation that the
location can be overwritten.
If you do not supply a location number but press O, the next
available location will be used.
ST210_EN.BK Page 55 Thursday, May 11, 2000 2:56 PM
When the new entry has been entered, a timed message
Stored XXX will be displayed and the phone will return to the
sub-menu of Add Entry.
Add Voice Tag
If you add a Phone Book entry to the phone memory, the Add
Voice Tag? prompt appears after Stored XXX . Press O to
add a Voice Tag. See Using Voice Control.
Check Capacity
This option is used to check the number of free Phone Book
entries in the phone or SIM card memory areas.
Check Phone Capacity, Check SIM Capacity
Once selected, a timed message XX Unused Locations
displays the requested information.
Prevent Access
This option enables you to prevent access to the Personal
Numbers list.
AYou cannot record a Voice Tag if you have set Prevent
Access To Phone Memory.
To SIM Card Memory, To Phone Memory, To Phone & SIM
Memory, No Memory Restrictions
You can prevent access to all entries in the SIM card memory, the
phone memory or both the phone and SIM card memory. To
cancel all access restrictions use the No Memory Restrictions
option.
When you change the restrictions, you will be requested to enter
the Security Code before the change is made.
Copy SIM Memory
This option is used to copy the Phone Book memory of one SIM
card to another in the event you change cards. Follow the phone
prompts to copy a SIM card’s memory.
Show Services
This option displays a list of phone numbers and services
provided by your Service Provider.
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Last Ten Calls
These options can be used to call the most recently used phone
numbers.
Once an option has been selected, use the < and > keys to
scroll through the list of phone numbers. Press the O key to
call the displayed number.
AYou can use postscripting to modify a number once you
have retrieved it from either of the Last Ten Calls lists.
Last Calls Made
i Press O and < or >
This option can be used to redial the phone number of any one
of the last ten calls made.
Last Calls Received
i Press E 5 to enter the list
Using the Options Menu
55
ST210_EN.BK Page 56 Thursday, May 11, 2000 2:56 PM
This option can be used to redial the phone number of any one
of the last ten calls received.
AYou will only see numbers in the Last Calls Received list if
you have Caller Line Identification.
Erase All Numbers
This option erases all the numbers stored in your Last Ten Calls
Made and Last Ten Calls Received lists.
AThe Last Ten Calls list will be erased when a new SIM is
inserted in the phone.
My Phone Number(s)
This option allows you to access your phone, fax and data
numbers so that you can retrieve or modify them when required.
For example, if you have difficulty remembering your phone
number, store it with the name ‘My Phone‘ and then you will be
able to retrieve the number as required.
The My Phone Number(s) list is stored on your SIM card.
When you select this item, the first location will be displayed. Use
the < and > keys to scroll through the phone numbers
stored.
To enter or change a number, scroll to the location and press
O. You will be prompted to enter a phone number and then a
name. Press O to store the information.
ADepending on your Service Provider, you may find that one
or more of the entries in the My Phone Number(s) list will
have been defined. You may not be able to change these
predefined entries.
56
Using the Options Menu
Fixed Dialing
AAvailability of the Fixed Dialing menu depends on the type
of SIM card and your Service Provider.
This feature allows you to limit use (typically third-party use) of
your phone to a predefined list of telephone numbers or, if you
wish, to a list of country codes, area codes, or other prefixes of
your choosing.
When Fixed Dialing is switched on, the only numbers that can be
dialed from your phone are those stored (or whose prefix is
stored) in the Fixed Dial list. If you attempt to dial any other
number (apart from an emergency number), the message
Restricted will be displayed. You will not be able to make fax
or data calls.
To make a call when Fixed Dialing is switched on, either dial the
number manually, or select it from the Fixed Dial list and press
O.
Up to 40 entries can be stored in the Fixed Dial list. The list is
stored on your SIM card.
! This option may be affected by the Call Barring setting.
View Fixed Dial List
This option allows you to scroll through the numbers in the Fixed
Dial list. When you find the number you want, press O to
make the call.
ST210_EN.BK Page 57 Thursday, May 11, 2000 2:56 PM
Set Up Fixed Dialing
This option allows you to switch Fixed Dialing on or off and to
enter or change entries in the Fixed Dial list.
You will be prompted to enter your PIN2 security code when you
select this option.
On
Switches Fixed Dialing on.
Off
Switches Fixed Dialing off.
Edit Entry
Modifies or clears an entry in the Fixed Dial list. When you select
this option, the first non-empty location in the list will be
displayed. Scroll to the entry you want to change and press O.
You will be prompted to edit the phone number and the name.
To erase the entry, press C.
One-Touch Dial Setting
This option allows you to specify which Phone Book list can be
One-Touch Dialed.
To Phone Memory
Switches One-Touch Dialing to your Personal Numbers list stored
in phone memory (locations 1 to 9).
To SIM Memory
Switches One-Touch Dialing to your Personal Numbers list stored
on your SIM card (locations 101 to 109).
To Fixed Dial list
AThis option is only available if you have Fixed Dialing.
Switches One-Touch Dialing to your Fixed Dial list
(locations 1 to 9).
Add Entry
Adds a phone number and name to the Fixed Dial list. When you
select this option you will be prompted to enter the phone
number, name and a location number. If you do not specify a
location number, it will be stored in the next available location.
AWhen setting up your Fixed Dial list, you may want to
reserve the first nine locations for phone numbers you wish
to One-Touch Dial. See also ‘One-Touch Dial Setting’.
Erase Entry
Erases a phone number and name from the Fixed Dial list. The
first entry in the Fixed Dial list will be displayed. Scroll to the entry
you wish to delete and press O.
Using the Options Menu
57
ST210_EN.BK Page 58 Thursday, May 11, 2000 2:56 PM
Call Related Features Menu
Show Battery Meter
This option displays the approximate amount of battery capacity
remaining, for example:
Number of
Segments
Approximate Charge Level
1
less than 5% (recharging needed)
2
less than 20%
3
less than 60%
4-5
greater than 60%
Restrict My Phone Number
'Restrict My Phone Number' is a network feature. You will need
to subscribe to one of the two Caller Line Identification restriction
features with your Service Provider.
58
Using the Options Menu
ST210_EN.BK Page 59 Thursday, May 11, 2000 2:56 PM
Show ID on Next Call
Your phone number is sent with the next attempted call; after
this your phone number will not be sent until you re-select this
option.
This option can be used to:
Restrict ID on Next Call
Your phone number will not be sent with the next attempted call;
after this your phone number will be sent with calls until you reselect this option.
• Forward incoming Fax calls.
j Call Forwarding*
• Forward all incoming Voice calls unconditionally.
• Forward incoming Voice calls whenever your phone is
unavailable, busy, not reachable or not answered.
• Forward incoming Data calls.
• Reset all forwarding options to off.
AYou cannot change the call forward settings when you are
out of network coverage.
After selecting any of the call forward options there will be a
short delay while the phone asks the network for the current
setting.
Forward Voice Calls
This option will allow you to set your phone to Forward When
Unavailable, Forward All Voice Calls or Detailed Forwarding.
Forward When Unavailable
This option will enable you to forward all incoming Voice calls to
a single number, whenever your phone is unavailable.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
Call forwarding is a network feature. If your phone is unavailable,
or you do not wish to receive calls, incoming calls can be
forwarded to other phone numbers.
* Network and/or subscription dependent feature. Not available
in all areas.
ASetting “Forward When Unavailable” to On will have the
same effect as setting all “Detailed Forwarding” options to
On.
AWhen On, Forward When Unavailable takes priority over
detailed forwarding settings.
Using the Options Menu
59
ST210_EN.BK Page 60 Thursday, May 11, 2000 2:56 PM
Forward All Voice Calls
This option will enable you to unconditionally forward all
incoming Voice calls to a single number.
Forward Fax Calls
This option will enable you to forward all Fax calls to a single
number.
The option has two settings, On or Off.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
AWhen On, Forward All Voice Calls takes priority over all
other Voice call forwarding settings.
Forward Data Calls
This option will enable you to forward all Data calls to a single
number.
Detailed Forwarding
These options will enable you to forward Voice calls to different
numbers, depending upon the current status of your phone.
Each of the following detailed forwarding options operate in the
same way.
Each option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
ADetailed forwarding settings are ignored while Forward All
Voice Calls or Forward When Unavailable are On.
If Busy
This option will forward incoming calls if your phone is busy.
If Not Reachable
This option will forward incoming calls if your phone cannot
be contacted by the network.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
Cancel All Forwarding
This option will enable you to cancel the forwarding of incoming
calls.
! This option resets all forwarding settings to Off and
removes all forwarding numbers.
j Call Holding and Call Waiting
Your phone supports the PCS network options of Call Holding
and Call Waiting.* Using these options, you can place a current
phone call on hold and accept an incoming call or start a second
call.
If No Answer
This option will forward incoming calls if you do not answer
the call.
60
Using the Options Menu
* Network and/or subscription dependent feature. Not available
in all areas.
ST210_EN.BK Page 61 Thursday, May 11, 2000 2:56 PM
The Call Waiting menu item has two settings, On or Off. If you
select Off, you will not be notified of waiting calls. The person
trying to contact you will either receive a busy tone or be
forwarded if Detailed Forwarding - If Busy is activated.
j Call Barring
Call barring is a network feature which can be used to selectively
bar outgoing and incoming calls.
If you change the barring setting, you may be asked to enter your
barring password. There will be a short delay while the phone
notifies the network of the new setting. When the change has
been made by the network, the phone will display a confirmation
message.
The initial password will be supplied to you by your Service
Provider when you subscribe to this service.
AThis option may be affected by the Fixed Dialing setting.
Bar Outgoing Calls
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
Int'l Calls
When selected, this option will bar outgoing international calls.
Int'l Calls Except Home
When selected, this option will bar outgoing international calls,
except those to your home country.
All Calls
When selected, this option will bar all outgoing calls, except
emergency calls.
Off
When selected, this option will disable all call barring for
outgoing calls.
Bar Incoming Calls
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
When Roaming
When selected, this option will bar incoming calls when you are
roaming.
You may wish to select this option, as some Service Providers
charge an additional fee for receiving calls when you are
roaming.
All Calls
When selected, this option will bar all incoming calls.
Off
When selected, this option will disable all call barring for
incoming calls.
Cancel All Barring
This option can be used to set all Call Barring options to Off.
Change Bar Password
This option can be used to change the call barring password.
After selecting this option, you will be asked to enter the current
password.
You will then be asked to enter, and then re-enter, your new,
4 digit, barring password. When the change has been made by
the network, the phone will display a confirmation message.
Using the Options Menu
61
ST210_EN.BK Page 62 Thursday, May 11, 2000 2:56 PM
Key Answer Only
This feature has two options: On or Off.
When set to On, this feature allows the flip to be opened without
answering an incoming call. The call can be answered by pressing
an appropriate key (O, 1 to 9, < or >). To reject
the call press C.
When set to Off, opening the flip answers an incoming call.
62
Using the Options Menu
ST210_EN.BK Page 63 Thursday, May 11, 2000 2:56 PM
Messages Menu
SMS Messages
These are text messages that are sent specifically to and from
your phone number.
When an SMS message is received, your phone:
1 Makes three short alert tones (depending on the ‘Ring or
Vibrate’ setting).
2 Displays the o (messages) icon.
3 Stores the message for later viewing, if there is space. If there
is not enough space, the o icon will flash. One or more
messages must be removed before the message can be stored.
Your Service Provider will transmit a message for a limited time. If
a memory location is not made available before the message is
removed from the network, then you will not be able to receive
or read it.
4
Message
will then be displayed with the prompt; Read
Now?.
5 If O is pressed, the phone will enter the Received Messages
browser and immediately display the new message.
6 If C is pressed the phone will return to the screen which
was displayed prior to receipt of the message.
7 If any other key is pressed it will perform the function linked
with that key.
Your phone supports the two GSM message features: Short
Message Services (SMS) and Cell Broadcast.
8 If no key is pressed the display will time-out after 1 minute
and return to the screen which was displayed prior to receipt
of the message.
Using the Options Menu
63
ST210_EN.BK Page 64 Thursday, May 11, 2000 2:56 PM
Cell Broadcast Messages
These are general messages, broadcast to a group of phones,
and can only be received when your phone is in standby mode.
These messages are broadcast in numbered 'channels' and, in
general, each channel will tend to carry one particular type of
information.
Typical cell broadcast channels could have information on local
weather conditions, traffic reports or stock market prices. Please
contact your network operator for a list of available channels.
When the message has scrolled across the display, the beginning
of the message will be shown until you either remove it or a new
message arrives.
How to Read SMS Messages
Press O once you have completed your message. You will then
be presented with the following options:
- If you select this option you will be
prompted for a phone number; enter the number and then
press O to send the message.
Send Message
ADialing prefixes and area codes may be required.
- Select this option to store your edited
message in your Outgoing Messages list.
Store Message
AIf you don’t store the message after it has been edited, you
will lose all your changes as soon as you select another
message to be edited.
j Call Voicemail
You can use the scroll keys (< and >) to scroll through
messages in either the Received Messages or Outgoing Messages
lists.
i E 4 to call voicemail
To display a specific message, enter the message number, for
example, press 5 to display the 5th message. If the message
does not exist, Invalid Msg Number will be displayed.
The voicemail number is entered using the ‘Voicemail Number’
option in the Message Settings menu.
Alternatively, to display the next message, press O and select
Go To Next Message.
How to Create and Edit SMS Messages
Use the Message Editor to create or modify text messages. When
you enter the editor, the last message that was edited will be
displayed. Press and hold C to clear the message and start a
new one, or modify the message displayed. For an explanation of
how to enter text, see ‘How to Enter Alphabetic Characters’.
64
Using the Options Menu
This option will make a call to the current voicemail number.
ST210_EN.BK Page 65 Thursday, May 11, 2000 2:56 PM
j Received Messages
This option is used to view and manage any SMS messages that
have been sent to your phone number.
When selected, this option will display a message indicating the
total number of messages and how many of these are new. If
there are no messages, No Messages will be displayed.
Return Call
This option can be used to call the person who sent you the
message, if their number has been included by the network, or a
number that has been included in quotes (“”) in the message.
If there are messages, the new messages will be displayed first,
followed by the old. Repeated presses of the $ key will display
the whole message, when it was sent and the phone number of
the sender if available.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
and/or store it in your Outgoing Messages list. See ‘How to
Create and Edit SMS Messages’ for more information on using
the Message Editor.
Once you have read a new message it will automatically become
old.
Go to Next Message
This option will display the next received message.
See ‘How to Read SMS Messages’ for more information on
navigating through the messages.
Press O when viewing any message to enter the sub-menu.
Delete Message
This option will delete the currently viewed message
Reply to Message
This option allows you to reply with a message.
If you are currently reading the last message in your list then this
option will take you back to the top of the list.
Delete All Messages
This option allows you to delete all received messages whether
they have been read or not.
AOnce deleted, messages are NOT retrievable.
iTAP™
Availability depends on your subscription to these services.
To turn iTAP™ on, select Phone Setup from the Options Menu
and press O. Select Entry Method Selection and press O.
Use the ª key to select iTAP™ and press O.
Using the Options Menu
65
ST210_EN.BK Page 66 Thursday, May 11, 2000 2:56 PM
Outgoing Messages
This option is used to view and manage any outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
AYou cannot send an outgoing message until the Message
Service Center number has been set. See ‘Message
Settings’.
Press O when viewing any message to enter the sub-menu.
See ‘How to Read SMS Messages’ for more information on
navigating through the messages.
Send Message
Find Entry by Location - this allows you to recall a phone
number from the Phone Book by location and send the message
(see ‘Find Entry by Location’ in the ‘Phone Book’ section).
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See ‘How to Create
and Edit SMS Messages’ for more information on using the
Message Editor.
Delete Message
This option will delete the currently viewed message.
Go to Next Message
This option will display the next outgoing message.
Message Editor
i E 7 to access Message Editor
This option allows you to add the destination phone number
using a sub-menu. Using the scroll keys you can select:
Enter Number - this allows you to manually enter the phone
number using the keypad and send the message.
Find Entry by Name - this allows you to recall a phone number
from the Phone Book by name and send the message (see ‘Find
Entry by Name’ in the ‘Phone Book’ section).
66
Using the Options Menu
The Message Editor is used to edit the currently selected message
and then to either send the modified message or store it in your
Outgoing Messages list. See ‘How to Create and Edit SMS
Messages’ for more information on using the Message Editor.
ST210_EN.BK Page 67 Thursday, May 11, 2000 2:56 PM
VoiceNotes
The VoiceNotes feature allows you to record a number of
personal voice messages or to record conversations during a
phone call. See Using VoiceNotes for more information.
Play VoiceNotes
This option allows you to play your VoiceNotes. Press < or
> to scroll through the VoiceNotes. Press O while a
VoiceNote is playing to go to the next VoiceNote.
Show Time Available
This option displays the amount of time available for you to
record your VoiceNotes.
Erase All VoiceNotes
This option allows you to delete all your VoiceNotes.
Cell Broadcast
This option is used to set the cell broadcast settings. The option
has two settings, On or Off.
If you change the setting to On, you will be asked to enter the
channel you wish to receive information from.
Please contact your Service Provider for a list of available channels
and the information they provide.
While a broadcast message is scrolling across the display you can
stop and start it by pressing <. Press > to restart the
message from the beginning. If you want to remove the message
from the display, press C.
AIf you need to use the < and > keys for their normal
functions while you are receiving a cell broadcast message,
you must first remove the message.
Message Settings
Voicemail Number
This option is used to store a phone number which will be used
by the ‘Call Voicemail’ option. The number can be manually
entered or read automatically from your SIM card (depending on
your Service Provider).
If there is already a Voicemail Number, this will be shown in the
display. This can be used, modified or deleted as desired.
Using the Options Menu
67
ST210_EN.BK Page 68 Thursday, May 11, 2000 2:56 PM
Service Center
Before you can send any messages, you must check this option to
ensure you have a Message Service Center Number. Normally,
this will be read from your SIM card. If no number is available,
contact your Service Provider.
Expiry Period
You can use this option to specify the maximum time, in hours,
that your unforwarded messages are to remain with the Message
Service Center before being deleted. When you select this
option, the current expiry period will be displayed (the default is
24 hours).
The maximum value you can enter is 10584, though the real limit
will depend on your Message Service Center.
Outgoing Message Type
This option is network dependent and can be used to specify the
format of your outgoing messages. You can select from the
following message types: Text (default), Fax, Paging,
E-Mail or Voice.
AYou do not need to select Voice to send messages to
Voicemail boxes.
68
Using the Options Menu
ST210_EN.BK Page 69 Thursday, May 11, 2000 2:56 PM
Phone Setup Menu
Select Phone Line
This option allows you to switch between Line
1
and Line
2.
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Adjust Ring Volume
i E then press the volume buttons (up or down)
Set Message Alert Tone
Edit Music Tone
Quick Access Setup
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Entry Method Selection
Tap Mode
ITAP
Adjust the volume by pressing the volume buttons on the side of
your phone.
Using the Options Menu
69
ST210_EN.BK Page 70 Thursday, May 11, 2000 2:56 PM
j Ring or Vibrate
j Set Ringer Tone 2
This option sets the way your phone alerts you to an incoming
call. The options are:
This option sets the tone your phone will make when an
incoming call is received on Line 2.
•
Ring Only - the phone will ring with the tone specified by
the Set Ringer Tone option.
AThis option will not appear if you do not subscribe to Line 2.
•
Vibrate Only
•
Vibrate Then Ring
- the phone will vibrate using VibraCall™.
- the phone will vibrate twice and
then ring.
•
No Ring or Vibrate
Call
- the phone will just display the
message.
AThe setting you choose also defines the type of alert for an
incoming SMS message (except that if you select Vibrate
Then Ring, your phone will just vibrate).
j Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone - Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
AIf you select the Single Ring Tone option, the phone will only
ring once when a call is received.
70
Using the Options Menu
j Set Message Alert Tone
This option sets the tone your phone makes when it receives an
SMS message.
Standard Tone
Your phone makes a standard SMS alert tone.
Single Ring Tone - Music Tone
When selected, your phone will produce one of these alternative
SMS alert tones.
AIf you select the Single Ring Tone option, the phone will only
ring once when it receives an SMS message.
Edit Music Tone
Select this option to create your own music tone. Your phone
prompts you with Edit Music:. Use your phone keypad to
enter the musical notes. See ‘Entering Text on Your Phone’.
The first character sets the overall speed of the music, from 1
(slow) to 4 (fast). You must leave a space between the speed
character and the rest of the music. You must also leave a space
between each note. Each music tone can have a maximum of 35
notes.
ST210_EN.BK Page 71 Thursday, May 11, 2000 2:56 PM
To enter notes, use the note’s letter abbreviation (A to G, or R for
“Rest”), followed by # if the note is a sharp. To make the note an
octave higher or lower, put a + or a - directly after the note.
Automatic Lock
This option can be used to automatically lock your phone each
time it is switched on. The option has two settings, On or Off.
Unless you specify otherwise, each note is a quarter note which
sounds for one beat. To specify the length of the note, put a
number from 1 to 8 directly after the note’s letter. The higher the
number, the longer the note will last.
Lock Now
This option can be used to immediately lock your phone. Once
selected, your phone will be unusable until the unlock code is
entered.
When you finish editing the music tone, press O. You can then
select Play Music, Save Music, or Erase Music.
Quick Access Setup
Change Unlock Code
This option is used to change the unlock code.
This option allows you to do the following:
After selecting this option, you will be asked to enter the current
security code before you can proceed.
• Customize your Quick Access menu.
You can now enter a four digit code to replace the old code.
• Set up and change the Voice Tag allocation for the Quick
Access features.
ABy pressing the $ key, you can access this option even
when the phone is locked.
For more information, see Voice Control for Quick Access
Features.
j Phone Lock
Adjust Contrast
This option is used to adjust the screen contrast.
The contrast is displayed as follows:
This option is used to set, and change, the unlock code.
The unlock code can be set to protect your phone from
unauthorized use. It can be set to automatically lock your phone
each time it is switched on.
The unlock code is a four digit number which is set at
manufacture to 1234. This can be changed at any time by using
the 'change unlock code' option.
Adjust the contrast by pressing < or > on the keypad.
Pressing O or C on the keypad will end the contrast
adjustment.
Using the Options Menu
71
ST210_EN.BK Page 72 Thursday, May 11, 2000 2:56 PM
Require SIM Card PIN
This option is used to set, and change, the PIN code.
The PIN code can be set to protect your SIM card from
unauthorized use. If set to On, access to your SIM card will be
restricted each time it is inserted or the phone is turned on.
The option has two settings, On or Off.
AIf the SIM card does not support PIN code disabling, these
items will not appear.
Change SIM PIN Code
This option is used to change the SIM card PIN code.
The new PIN code must contain four to eight digits.
! If this operation is performed incorrectly 10 times in a
row, your SIM card will become permanently blocked.
Change SIM PIN2 Code
This option is used to change your PIN2 security code.
When you select this option you must enter the old PIN2 security
code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN2 security code. The new PIN2 security code
must be entered again as confirmation.
The 'Require SIM Card PIN' option must be set to On and you
must enter the old PIN code before you can proceed.
! If the PIN2 security code is entered incorrectly three
times in a row, the Blocked message will be displayed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN code. The new PIN code must be entered
again as confirmation.
When the Blocked message is displayed, you are not allowed
access to menu items that require you to enter the PIN2 code, for
example, ‘Set Up Fixed Dialing’ and ‘Call Charge Settings’.
! If the PIN number is entered incorrectly three times in a
row, your SIM card will automatically lock up and the
Blocked message will be displayed.
If you receive the Blocked message when you try to enter your
PIN2 code, you will need to unblock and change the code using
the following key sequence:
Unblocking Your Phone
If you receive the Blocked message you will need to enter an
unblock code and key sequence before you can use the phone.
AThe 8-digit PIN unblocking code will have been provided
with your SIM card by your Service Provider.
Enter the following key sequence to unblock your phone:
<<05<EO
FOFO
72
Using the Options Menu
<<052<EO
JOJO
AThe 8-digit unblocking code will have been provided with
your SIM card by your Service Provider.
! If the PIN2 unblocking operation is performed
incorrectly 10 times in a row, your PIN2 code will
become permanently blocked.
ST210_EN.BK Page 73 Thursday, May 11, 2000 2:56 PM
j New Security Code
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set by
Motorola to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
AIn order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
j Extended Menus
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off.
Show Time and Date
When selected, this option displays the time and date until any
key is pressed.
j Set Time and Date
This option is used to set the time and date. You will be
prompted to Enter Time - the time must be entered in 24hour format. You will then be prompted to Enter Date.
j Set Time Format
This option is used to set the clock to either 12-hour or 24-hour
format.
j Language Selection
This option is used to change the language for display messages.
The option has multiple settings of Automatic, English, French
and Spanish.
When you select a language, all further display prompts and help
messages will be in the selected language.
Entry Method Selection
This option allows you to select the default entry method for
editing text on your phone. Press $ to display each of the
available options. Then press O to select the entry method you
require.
AIf iTAP does not support the current language set up for
your phone, then only Tap is available. Your phone displays
Not Available when you press $.
See Entering Text on Your Phone in The Phone Book Menu.
Using the Options Menu
73
ST210_EN.BK Page 74 Thursday, May 11, 2000 2:56 PM
Battery Saving Mode
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
The option has two settings, On or Off.
This option allows you to change or disable tones you hear when
you press a key.
Tones, Single Tone
• Cancel Automatic Answer, Audible Call Timers, In-Call Display
Meter, Battery Save (DTX), Auxiliary Alert, Automatic
Handsfree, Automatic Lock, Cell Broadcast and Talk and Fax
Mode.
• Return Language Selection to Original.
Phone Status
Status Review
This option can be used to view the current setting of menu
options.
When selected, your phone will display a list of menu items
which have been changed from the default setting. Press the
$ key to view the next item.
74
This option is used to restore certain phone options to their
original settings.
When selected, you will be asked to enter the security code.
Once entered, the master reset option will perform the following
operations:
j Select Keypad Tones
The option has three settings, Normal
or No Tones.
Master Reset
! This option should be used with extreme caution.
Using the Options Menu
• Restore Keypad Tones to Normal, Ringer Tones to Standard,
Volume Level to Medium and Network Search frequency to
Medium.
• Restore Extended Menus to their default settings.
• Erase all recorded VoiceNotes.
• Erase all recorded Voice Tags.
ST210_EN.BK Page 75 Thursday, May 11, 2000 2:56 PM
Master Clear
! This option should be used with extreme caution; for
example, it will clear all the Phone Book entries from
your phone memory.
This option is used to restore certain phone options to their
original settings.
When selected, you will be asked to enter the security code.
Once entered, the master clear option will perform the same
operations as 'Master Reset', plus the following operations:
• Clear the Phone Book entries from phone memory (not from
SIM memory)
• Clear the Last Calls Made and Last Calls received list
• Clear the Message Editor
• Reset the Resettable Call Timers.
Master Clear does not clear the:
• Fixed Dial list
• My Number(s) list
• Charge Meters
• Received and Outgoing Messages list
• Voicemail number
• SMS Service Center number
• Lifetime timer.
Using the Options Menu
75
ST210_EN.BK Page 76 Thursday, May 11, 2000 2:56 PM
Network Selection Menu
Network Selection
In order for the phone to make and receive phone calls, it must
register with one of the available networks.
Your phone automatically searches for the last network used. If,
for any reason, this network is unavailable, your phone will
attempt to register with a new network.
When your phone needs to register with a new network, it will
generate a sorted list of networks. The network list is sorted in
the following order:
• Last Registered Network.
• The Home network.
• GSM 1900 Networks from a preferred list.
• A random list of other networks found above a certain signal
strength.
• All remaining GSM 1900 networks.
AAny forbidden networks that are stored on your SIM card
will not be included in the sorted list.
76
Using the Options Menu
ST210_EN.BK Page 77 Thursday, May 11, 2000 2:56 PM
Available Networks
When selected, this option will scan to see which networks are
operating in your current location. When the scan is complete,
press the $ key to scroll through the list. When you see a
network you wish to register with or store in your preferred list,
press the O key. You will now enter the 'Register Now' and
'Make Preferred' sub-menu.
Register Now
Once selected, your phone will try to register with the selected
network. If the registration fails, your phone will try to register in
the normal way.
Make Preferred
Once selected, you will be asked where the selected network is
to be located in the preferred list.
Network Search
These options determine how often your phone tries to register
with a network and how the attempt is made.
Registration Preferences
This option determines how the phone tries to register with a
network.
The option has two settings, Automatic
Search.
Search
or Manual
If registration is unsuccessful with one network in the list, your
phone will try the next listed network. If your phone fails to
register with any of the listed networks, it will start at the
beginning of the list after a preset period. The preset period is
determined by the 'Frequency Of Search' option.
Manual Search Mode
In the manual mode, the phone will present you with the sorted
list of networks. Use the <, > and O keys to select one
network from the list. Your phone will try to register with the
selected network. If this is successful, the phone will display the
network name and then enter the standby mode.
If registration is unsuccessful, your phone will present the list
again after a preset period. The preset period is determined by
the 'Frequency Of Search' option.
Frequency of Search
This option is used to determine how long your phone waits
before attempting to re-register after a registration attempt has
failed.
The option has the following settings: Slow Search, Medium
Search, Fast Search or Continuous Search.
! Fast and Continuous Search may use up a significant
amount of battery power.
Automatic Search Mode
In the automatic mode, the phone will try to register with the
first network in the sorted list. If this is successful, your phone will
display the network name and then enter the standby mode.
Using the Options Menu
77
ST210_EN.BK Page 78 Thursday, May 11, 2000 2:56 PM
j Preferred Networks
Add Network to List
This option enables you to add networks to your preferred list.
When selected, the 'Choose From Available' option will scan to
see which networks are operating in your current location. When
the scan is complete, press the $ key to scroll through the list.
When you see a network you wish to store in your preferred list,
press the O key. You will be asked where the selected network
is to be located in the preferred list.
The 'Choose From Known' option will, when selected, present
you with a preset list of networks. Press the $ key to scroll
through the list. When you see a network you wish to store in
your preferred list, press the O key. You will be asked where
the selected network is to be located in the preferred list.
Select the 'Add New Network Code' option to enter network
codes directly. Once entered, you will be asked where the
network is to be located in the preferred list.
78
Using the Options Menu
Show List of Networks
This option is used to display the networks you have stored in
your preferred list. In addition, pressing the O key will select
the currently displayed entry and enter a move/delete sub-menu.
When 'Move to New Location' is selected you will be asked to
enter a new location for the selected network.
When selected, 'Delete Selection' will remove the selected
network from the preferred list.
Find New Network
When selected, the phone will try to register with a network in
the normal manner, with one exception. When the registration
attempt is made, your current network will be excluded from the
list of those available. If the attempt fails, your phone will then try
to re-register with the previous network.
ST210_EN.BK Page 79 Thursday, May 11, 2000 2:56 PM
Call Meters Menu
Call Metering
Your phone has an internal metering system which can be used
to provide you with individual and total call time.
The meter can be displayed during a phone call and audible
tones can be generated to indicate the passage of call time.
Show Call Timers
This feature allows you to display the duration of your calls and
to reset your time meters to zero.
Show Last Call
Displays the duration of your last call.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the ‘Reset All Timers’ option.
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
Using the Options Menu
79
ST210_EN.BK Page 80 Thursday, May 11, 2000 2:56 PM
j Set Audible Call Timers
Your phone provides two programmable audible call timers:
• The 'Single Alert Timer' will sound a beep just once during a
call, after a preset time has elapsed.
• The 'Repetitive Timer' will sound regular beeps during a call,
at preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Set In-Call Display
This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
AIf a total charge limit has been set, then the in-call display
always shows your remaining credit.
No In-Call Display
This option switches off in-call display of the charge/time meter.
Lifetime Timer
This option is used to display the total time of all calls made on
your phone.
This meter cannot be reset; the Reset All Timers, Master
Reset or Master Clear options have no effect.
80
Using the Options Menu
ST210_EN.BK Page 81 Thursday, May 11, 2000 2:56 PM
Accessory Setup Menu
Automatic Answer
This option allows your phone to automatically answer an
incoming call after two rings.
This option has two settings, On or Off.
Automatic Handsfree
Determines whether incoming or outgoing calls are started in
handsfree or private mode. When set to On, calls will start in
handsfree mode, even when the external handset is out of the
hang-up cup. When set to Off, calls will start in private mode
when the external handset is out of the hang-up cup.
Safety Timer
This option can be used to keep the phone on for a set period
after the vehicle ignition has been turned off. This prevents the
vehicle's battery from becoming drained and saves you from
having to re-enter PIN and Unlock codes after every short stop.
† Only this option will be displayed when the headset accessory
is attached.
‡ Availability depends on the type of car kit installed.
The accessory setup menu is only visible when your phone is used
with a car kit or when a headset accessory is used.
The car kit provides charging facilities, connection to an external
antenna for better reception, external microphone and speaker
for handsfree operation, and an external handset with hang-up
cup.
The 'Safety Timer' is set to 60 minutes. Once selected, this option
can be adjusted to any value between zero and 999 minutes.
When set to zero, this option is effectively switched off.
AIf the Safety Timer is set to zero, the phone, while
connected to the car kit, will operate only in conjunction
with your vehicle’s ignition. If the ignition is off and you
press the phone’s power key, the phone will power up
momentarily and then immediately power down.
Using the Options Menu
81
ST210_EN.BK Page 82 Thursday, May 11, 2000 2:56 PM
Auxiliary Alert
This option allows your phone to alert you of an incoming call by
flashing your vehicle lights, or by sounding the horn. It must be
enabled by your local dealer.
ASome local regulations prevent the use of this option and,
accordingly, this option may not be present on your phone.
82
Using the Options Menu
ST210_EN.BK Page 83 Thursday, May 11, 2000 2:56 PM
Using the Quick Access Menu
Although the features in your phone are available through easy
access menus, some of the most commonly used features are
also available in the quick access menu. Each feature in the menu
is allocated a number from 1 to 9.
To use a quick access feature, press the quick access key (E)
followed by the number of the feature, or press < or > to
scroll through the menu and then press O.
You can change the features, and the positions of the features,
available in the quick access menu - see ‘Customizing the Quick
Access Menu’.
Each quick access feature is represented by an icon as well as the
feature name. The currently selected icon is shown with a dark
background.
Access Internet?
AThis is a network and subscription dependent feature.
Contact your service provider for details about the mobile
internet services based on the WAP (Wireless Application
Protocol) technology that they provide.
Use this option to start your mobile internet session. See Access
Internet for more information.
B Find Name?
** Network and/or subscription dependent
feature. Not available in all areas.
AThe menu shown above represents the default setting
supplied with your phone.
i E2
You will be prompted to Enter Name. Enter the first three
characters of the name and press O. The first matching entry
in the Phone Book will be displayed. Press O to call the
number.
Using the Quick Access Menu
83
ST210_EN.BK Page 84 Thursday, May 11, 2000 2:56 PM
W Received Calls?
L Vibrate On/Off?
i E5
i E8
Displays the first entry in the Last Calls Received list. You can
scroll through the list and call the numbers as normal. See ‘Last
Calls Received’ for more information.
The VibraCall™ alert will be switched either on or off depending
on the current setting. If the VibraCall™ alert is switched on, the
‘Ring or Vibrate’ setting changes to Vibrate Only. If it is
switched off, the ‘Ring or Vibrate’ setting changes to Ring
Only. See ‘j Ring or Vibrate’ for more information.
T Read Messages?
N Mute?
i E6
You will be prompted to enter a phone number and then a
name.
i E9
AIf you already had a number displayed, it will automatically
be re-displayed when you select this feature.
This option allows you to have a conversation without the person
on the line being able to hear you.
The number will be stored in the next available SIM card location.
See ‘Add Entry’ for more information.
K Message Editor?
R Last Call Timer?
Your phone has an internal metering system which will allow you
to display the duration of your last call. (Example: 00:00:50 –
call lasted 50 seconds.)
AYou must have defined a Voicemail number in order to use
this feature.
i E7
Your newest message will be displayed; you can then read, delete
and edit messages as normal. See ‘Received Messages’ for more
information.
See ‘Call Voicemail’ for more information.
G Battery Meter?
A bar graph indicating the approximate battery charge level will
be displayed. The more bars displayed, the greater the charge
level.
See ‘Show Battery Meter’ for more information.
84
Using the Quick Access Menu
ST210_EN.BK Page 85 Thursday, May 11, 2000 2:56 PM
H Lock Now?
Immediately locks your phone; you will not be able to use your
phone until the unlock code is entered. See ‘Phone Lock’ for
more information.
} Play VoiceNotes?
Plays the recorded VoiceNotes. See Using Voice Control for
more information.
Ä Last Calls Received?
Unconditional voice call forwarding will be switched either on or
off depending on the current setting. This will allow Fax and Data
forwarding to remain enabled independent of the Voice Call
Forwarding setting.
AYou must have defined a forwarding number using the
‘Forward All Voice Calls’ option in the Call Forwarding menu
in order to use this feature.
AYou cannot switch call forwarding on or off if you are
outside network coverage.
D Find Location?
You will be prompted to Enter Location. Enter the location
number and press O. The first matching entry in the Phone
Book will be displayed. Press O to call the number.
F Add to Phone Book?
You will be prompted to enter a phone number and then a
name.
J Mute Phone?
Temporarily turns the microphone off during a phone call.
Reselect this option to resume your conversation.
V Switch Memory?
Switches one-touch dialing between the phone and SIM
memories depending on the current setting.
U Outgoing SMS?
Your newest message will be displayed; you can then read, send,
delete and edit messages as normal. See ‘Outgoing Messages’
for more information.
a Message Editor?
The last message that was edited will be displayed. Press and
hold C to clear the message and start a new one, or modify
the message displayed. See ‘How to Create and Edit SMS
Messages’ for more information.
Y Call Timer?
Displays the duration of your last chargeable call. See ‘Show Call
Timers’ for more information.
c Restrict My ID?
Your phone number will not be sent with the next attempted call;
after this your phone number will be sent until you reselect this
option.
d Switch Line 1/2?
AIf you already had a number displayed, it will automatically
be re-displayed when you select this feature.
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
The number will be stored in the next available phone memory
location. See ‘Add Entry’ for more information.
Allows you to switch between Line 1 and Line 2.
Using the Quick Access Menu
85
ST210_EN.BK Page 86 Thursday, May 11, 2000 2:56 PM
e Show Services?
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Displays a list of phone numbers and services provided by your
Service Provider.
¥ Show Time/Date?
Displays the current time and date.
¤ Find New Network?
Allows you to quickly search for a new network.
© Adjust Contrast
Allows you to adjust the screen contrast.
m My Motorola?
Use this option to start your mobile internet session and access
the MyMotorola.com web site. See Access Internet for more
information.
86
Using the Quick Access Menu
ST210_EN.BK Page 87 Thursday, May 11, 2000 2:56 PM
Customizing the Quick Access Menu
You can change the features in the quick access menu to suit
your personal preferences.
To customize the menu:
1 Press E and scroll to the menu item you wish to change.
2 Press and hold O to access the list of features available. The
currently selected feature will be displayed.
• Switch Memory
• Read Messages1
• Outgoing Messages1
• Message Editor1
• Last Calls Received
3 Scroll through the list until you find the feature you wish to
store in the quick access menu; press O.
• Last Call Timer
4
• Restrict My ID
Completed
will be displayed to confirm that the feature has
been stored.
The items in the quick access list will appear in the following
order:
• Access Internet **
• My Motorola
• Find by Name
• Find by Location
• Show Time and Date
• Find New Network
• Switch Lines 1/2
• Play VoiceNotes
• Show Services1
• Forward Voice Call1
• Adjust Contrast
• Add Entry to Phone
• Add Entry to SIM
• Call Voicemail1
• Battery Meter
• Phone Lock Now
• Phone Mute On or Off
• Ring Volume
• VibraCall On or Off
1. Availability depends on the type and settings of the SIM card,
and/or your subscription to this feature.
** Network and/or subscription dependent feature. Not available
in all areas.
Using the Quick Access Menu
87
ST210_EN.BK Page 88 Thursday, May 11, 2000 2:56 PM
88
Using the Quick Access Menu
ST210_EN.BK Page 89 Thursday, May 11, 2000 2:56 PM
Optional Accessories
The following Motorola Original accessories have been designed
to work with your phone. Additional accessories may be available
and are packaged separately. Please refer to your local service
provider or retail outlet for more information.
Desktop Charger
The Desktop Charger allows you to charge a battery fitted in a
phone and a spare battery at the same time. Sequential LEDs
indicate charge status for each pocket.
AThe Desktop Charger must be used with the Power Adapter.
Power Adapter
The Power Adapter (charger) connects to the Desktop Charger or
directly to the phone. When connected directly to the phone, it
charges the battery and also provides dead battery operation.
Vehicle Power Adapter
The Vehicle Power Adapter connects to your phone and allows
you to charge your phone's battery while driving*. When the
phone is in use, the adapter overrides the battery therefore
preserving battery life. The adapter also provides dead battery
operation.
Headset
For convenient handsfree operation.
Personal Handsfree System
The Personal Handsfree System allows you to use your phone
handsfree.
Leather Carrying Case
The Leather Carrying Case holds the phone while being worn on
your belt.
Plastic Holster
The Plastic Holster holds the phone while being worn on your
belt.
AYour phone must be inserted into the plastic holster
correctly for maximum protection.
AThis holster has been designed for your convenience and is
not meant to secure your phone under all circumstances.
Vehicle Handsfree System
This system includes a phone holder and battery charger, and
provides handsfree operation. It also includes the facility to store
up to 20 names and numbers that can be called using voice
commands.
! A GSM 1900 mhz antenna should be specified when
installing a Vehicle Handsfree System.
AThis accessory requires professional installation.
* The use of wireless devices and their accessories (“devices”) may be
prohibited or restricted in certain areas. Always obey the laws and
regulations on the use of these devices.
Optional Accessories
89
ST210_EN.BK Page 90 Thursday, May 11, 2000 2:56 PM
90
Optional Accessories
ST210_EN.BK Page 91 Thursday, May 11, 2000 2:56 PM
What to do if...
You can’t switch your phone on
Check the battery. Is it charged, properly fitted and are the contacts clean and dry? See ‘Important Battery
Information’.
You can’t make calls
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in
a building, move closer to a window.
Check if your phone is powered on.
Check the Network Selection settings. Try Manual Selection, or try another network. See ‘Network Search’.
Check your Operator coverage map.
Is Restricted displayed? Check the Call Barring and Fixed Dialing settings.
Has a new SIM card been inserted? Check that no new restrictions have been imposed.
You can’t receive calls
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in
a building, move closer to a window.
Check the Call Forwarding and Call Barring settings.
Check the Ringer and VibraCall™ alert settings. If both are off, there is no audible alert. See ‘j Ring or
Vibrate’.
Your phone won’t unlock
Have you inserted a new SIM card? Enter the new PIN code. See ‘Entering Your SIM Card PIN Code’.
Do you have a replacement phone? Enter the default phone unlock code - 1234.
Have you forgotten the unlock code? Press $ to change the unlock code (you will need your security
code).
Your PIN is blocked
Enter the PIN unblocking code supplied with your SIM card (see ‘Unblocking Your Phone’).
Your PIN2 is blocked
Enter the PIN2 unblocking code supplied with your SIM card (see ‘Change SIM PIN2 Code’).
Your SIM card won’t work
Is the card inserted properly? See ‘SIM Card Insertion/Removal’.
Is the gold chip visibly damaged or scratched? Return the card to your Service Provider.
Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.
What to do if...
91
ST210_EN.BK Page 92 Thursday, May 11, 2000 2:56 PM
The battery won’t charge
Check the charger. Is it properly connected? Are its contacts clean and dry? See ‘Your Battery’.
Check the battery contacts. Are they clean and dry?
Check the battery temperature. If it is warm, let it cool before recharging.
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Are you using a Motorola original battery? Your charging system may not be able to communicate with
your battery. See ‘Your Battery’.
The battery icon and meter are
missing
Are you using a Motorola original battery? Your charging system may not be able to communicate with
your battery. See ‘Your Battery’.
The battery drains faster than
normal
Are you in an area of variable coverage? This uses extra battery power.
Is it a new battery? A new battery will need two to three charge/discharge cycles to attain normal
performance. See ‘Charging a New Battery’.
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Is it a battery that hasn’t been completely discharged? Allow the battery to fully discharge (until the phone
turns itself off) and then charge the battery overnight.
Check that the Frequency Of Search feature in the Network Selection menu has not been set to
Continuous. See ‘Network Search’.
Check that the Battery Saving Mode feature has not been set to
Fast
or
Off.
Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery
performance is significantly reduced.
You can’t cancel Call Forwarding
or Call Barring
Wait until you are in an area with good network coverage and try again.
The o symbol is flashing
There is not enough memory available to store another SMS message. Use the Messages menu to delete
one or more existing messages.
You can’t make international
calls
Some Service Providers automatically bar the ability to make international calls. Contact your Service
Provider.
Have you included the relevant codes? Press and hold the 0 key to display the international dialing
prefix (+) and then enter the appropriate country code followed by the phone number.
92
What to do if...
ST210_EN.BK Page 93 Thursday, May 11, 2000 2:56 PM
FDA Update
The U.S. Food and Drug Administration’s Center
for Devices and Radiological Health Consumer Update
on Mobile Phones
FDA has been receiving inquiries about the safety of mobile phones,
including cellular phones and PCS phones. The following summarizes
what is known--and what remains unknown--about whether these
products can pose a hazard to health, and what can be done to minimize
any potential risk. This information may be used to respond to questions.
Why the concern?
Mobile phones emit low levels of radiofrequency energy (i.e.,
radiofrequency radiation) in the microwave range while being used. They
also emit very low levels of radiofrequency energy (RF), considered nonsignificant, when in the stand-by mode. It is well known that high levels
of RF can produce biological damage through heating effects (this is how
your microwave oven is able to cook food). However, it is not known
whether, to what extent, or through what mechanism, lower levels of RF
might cause adverse health effects as well. Although some research has
been done to address these questions, no clear picture of the biological
effects of this type of radiation has emerged to date. Thus, the available
science does not allow us to conclude that mobile phones are absolutely
safe, or that they are unsafe. However, the available scientific evidence
does not demonstrate any adverse health effects associated with the use
of mobile phones.
What kinds of phones are in question?
Questions have been raised about hand-held mobile phones, the kind
that have a built-in antenna that is positioned close to the user's head
during normal telephone conversation. These types of mobile phones are
of concern because of the short distance between the phone's antenna-the primary source of the RF--and the person's head. The exposure to RF
from mobile phones in which the antenna is located at greater distances
from the user (on the outside of a car, for example) is drastically lower
than that from hand-held phones, because a person's RF exposure
decreases rapidly with distance from the source. The safety of so-called
"cordless phones," which have a base unit connected to the telephone
wiring in a house and which operate at far lower power levels and
frequencies, has not been questioned.
How much evidence is there that hand-held mobile phones
might be harmful?
Briefly, there is not enough evidence to know for sure, either way;
however, research efforts are on-going. The existing scientific evidence is
conflicting and many of the studies that have been done to date have
suffered from flaws in their research methods. Animal experiments
investigating the effects of RF exposures characteristic of mobile phones
have yielded conflicting results. A few animal studies, however, have
suggested that low levels of RF could accelerate the development of
cancer in laboratory animals. In one study, mice genetically altered to be
predisposed to developing one type of cancer developed more than twice
as many such cancers when they were exposed to RF energy compared to
controls. There is much uncertainty among scientists about whether
results obtained from animal studies apply to the use of mobile phones.
First, it is uncertain how to apply the results obtained in rats and mice to
humans. Second, many of the studies that showed increased tumor
development used animals that had already been treated with cancercausing chemicals, and other studies exposed the animals to the RF
virtually continuously--up to 22 hours per day.
For the past five years in the United States, the mobile phone industry has
supported research into the safety of mobile phones. This research has
resulted in two findings in particular that merit additional study:
1 In a hospital-based, case-control study, researchers looked for an
association between mobile phone use and either glioma (a type of
brain cancer) or acoustic neuroma (a benign tumor of the nerve
sheath). No statistically significant association was found between
mobile phone use and acoustic neuroma. There was also no
association between mobile phone use and gliomas when all types of
FDA Update
93
ST210_EN.BK Page 94 Thursday, May 11, 2000 2:56 PM
gliomas were considered together. It should be noted that the average
length of mobile phone exposure in this study was less than three
years.
When 20 types of glioma were considered separately, however, an
association was found between mobile phone use and one rare type
of glioma, neuroepithelliomatous tumors. It is possible with multiple
comparisons of the same sample that this association occurred by
chance. Moreover, the risk did not increase with how often the mobile
phone was used, or the length of the calls. In fact, the risk actually
decreased with cumulative hours of mobile phone use. Most cancer
causing agents increase risk with increased exposure. An ongoing
study of brain cancers by the National Cancer Institute is expected to
bear on the accuracy and repeatability of these results.
2 Researchers conducted a large battery of laboratory tests to assess the
effects of exposure to mobile phone RF on genetic material. These
included tests for several kinds of abnormalities, including mutations,
chromosomal aberrations, DNA strand breaks, and structural changes
in the genetic material of blood cells called lymphocytes. None of the
tests showed any effect of the RF except for the micronucleus assay,
which detects structural effects on the genetic material. The cells in
this assay showed changes after exposure to simulated cell phone
radiation, but only after 24 hours of exposure. It is possible that
exposing the test cells to radiation for this long resulted in heating.
Since this assay is known to be sensitive to heating, heat alone could
have caused the abnormalities to occur. The data already in the
literature on the response of the micronucleus assay to RF are
conflicting. Thus, follow-up research is necessary.
FDA is currently working with government, industry, and academic
groups to ensure the proper follow-up to these industry-funded research
findings. Collaboration with the Cellular Telecommunications Industry
Association (CTIA) in particular is expected to lead to FDA providing
research recommendations and scientific oversight of new CTIA-funded
research based on such recommendations.
94
FDA Update
Two other studies of interest have been reported recently in the literature:
1 Two groups of 18 people were exposed to simulated mobile phone
signals under laboratory conditions while they performed cognitive
function tests. There were no changes in the subjects' ability to recall
words, numbers, or pictures, or in their spatial memory, but they were
able to make choices more quickly in one visual test when they were
exposed to simulated mobile phone signals. This was the only change
noted among more than 20 variables compared.
2 In a study of 209 brain tumor cases and 425 matched controls, there
was no increased risk of brain tumors associated with mobile phone
use. When tumors did exist in certain locations, however, they were
more likely to be on the side of the head where the mobile phone was
used. Because this occurred in only a small number of cases, the
increased likelihood was too small to be statistically significant.
In summary, we do not have enough information at this point to assure
the public that there are, or are not, any low incident health problems
associated with use of mobile phones. FDA continues to work with all
parties, including other federal agencies and industry, to assure that
research is undertaken to provide the necessary answers to the
outstanding questions about the safety of mobile phones.
What is known about cases of human cancer that have been
reported in users of hand-held mobile phones?
Some people who have used mobile phones have been diagnosed with
brain cancer. But it is important to understand that this type of cancer
also occurs among people who have not used mobile phones. In fact,
brain cancer occurs in the U.S. population at a rate of about 6 new cases
per 100,000 people each year. At that rate, assuming 80 million users of
mobile phones (a number increasing at a rate of about 1 million per
month), about 4800 cases of brain cancer would be expected each year
among those 80 million people, whether or not they used their phones.
Thus it is not possible to tell whether any individual's cancer arose
because of the phone, or whether it would have happened anyway. A
key question is whether the risk of getting a particular form of cancer is
greater among people who use mobile phones than among the rest of
ST210_EN.BK Page 95 Thursday, May 11, 2000 2:56 PM
the population. One way to answer that question is to compare the
usage of mobile phones among people with brain cancer with the use of
mobile phones among appropriately matched people without brain
cancer. This is called a case-control study. The current case-control study
of brain cancers by the National Cancer Institute, as well as the follow-up
research to be sponsored by industry, will begin to generate this type of
information.
What is FDA's role concerning the safety of mobile phones?
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as mobile phones before marketing, as it does
with new drugs or medical devices. However, the agency has authority to
take action if mobile phones are shown to emit radiation at a level that is
hazardous to the user. In such a case, FDA could require the
manufacturers of mobile phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions
at this time, FDA has urged the mobile phone industry to take a number
of steps to assure public safety. The agency has recommended that the
industry:
• support needed research into possible biological effects of RF of the
type emitted by mobile phones;
• design mobile phones in a way that minimizes any RF exposure to the
user that is not necessary for device function ; and
• cooperate in providing mobile phone users with the best possible
information on what is known about possible effects of mobile phone
use on human health.
At the same time, FDA belongs to an interagency working group of the
federal agencies that have responsibility for different aspects of mobile
phone safety to ensure a coordinated effort at the federal level. These
agencies are:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Health and Safety Administration
• National Telecommunications and Information Administration
The National Institutes of Health also participates in this group.
In the absence of conclusive information about any possible risk,
what can concerned individuals do?
If there is a risk from these products--and at this point we do not know
that there is--it is probably very small. But if people are concerned about
avoiding even potential risks, there are simple steps they can take to do
so. For example, time is a key factor in how much exposure a person
receives. Those persons who spend long periods of time on their handheld mobile phones could consider holding lengthy conversations on
conventional phones and reserving the hand-held models for shorter
conversations or for situations when other types of phones are not
available.
People who must conduct extended conversations in their cars every day
could switch to a type of mobile phone that places more distance
between their bodies and the
source of the RF, since the exposure level drops off dramatically with
distance. For example, they could switch to
• a mobile phone in which the antenna is located outside the vehicle,
• a hand-held phone with a built-in antenna connected to a different
antenna mounted on the outside of the car or built into a separate
package, or
• a headset with a remote antenna to a mobile phone carried at the
waist.
Again, the scientific data do not demonstrate that mobile phones are
harmful. But if people are concerned about the radiofrequency energy
from these products, taking the simple precautions outlined above can
reduce any possible risk.
Where can I find additional information?
For additional information, see the following websites:
FDA Update
95
ST210_EN.BK Page 96 Thursday, May 11, 2000 2:56 PM
Federal Communications Commission (FCC) RF Safety Program
(select "Information on Human Exposure to RF Fields from Cellular and
PCS Radio Transmitters"): http://www.fcc.gov/oet/rfsafety
World Health Organization (WHO) International Commission on
Non-Ionizing Radiation Protection (select Qs & As):
http://www.who.int/emf
United Kingdom, National Radiological Protection Board:
http://www.nrpb.org.uk
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S. Food and Drug Administration (FDA) Center for Devices and
Radiological Health: http://www.fda.gov/cdrh/consumer/
1
Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain
Tumors. In: State of the Science Symposium;1999 June 20; Long Beach, California.
2
Tice et al. Tests of mobile phone signals for activity in genotoxicity and other
laboratory assays. In: Annual Meeting of the Environmental Mutagen Society; March
29, 1999, Washington, D.C.; and personal communication, unpublished results.
3
Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A.
Effect of a 915-MHz simulated mobile phone signal on cognitive function in man.
Int. J. Radiat. Biol., April 8, 1999.
4
Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular
telephones and the risk for brain tumors: a case-control study. Int. J. Oncol., 15:
113-116, 1999.
96
FDA Update
ST210_EN.BK Page 97 Thursday, May 11, 2000 2:56 PM
Patent Information
This product is manufactured under one or more of the following U.S. patents:
4291475 4794489 4972355 5087004 5175874
4302845 4797929 4972432 5093632 5182749
4312074 4797947 4972455 5095503 5185566
4365221 4798975 4975808 5107487 5185790
4369516 4802236 4977589 5109400 5187640
4369520 4803726 4977616 5111162 5187809
4369522 4809356 4979207 5113400 5192924
4374370 4811377 4984219 5113436 5193223
4378603 4811404 4984290 5117073 5195106
4390963 4817157 4989230 5117441 5195108
4398265 4827507 4992753 5117449 5198887
4400584 4829543 4996529 5117450 5200655
4400585 4831647 5008925 5121047 5201069
4434461 4843621 5010309 5121288 5203009
4455534 4845772 5010570 5121412 5203012
4486624 4851966 5014294 5122480 5203013
4491972 4852090 5014346 5122722 5203021
4523155 4860336 5017856 5124889 5204977
4546329 4860341 5018188 5127040 5205751
4574243 4868576 5020076 5127042 5210793
4581602 4870686 5020091 5127100 5211581
4581749 4872196 5020092 5128834 5212815
4585957 4873683 5020093 5133010 5212826
4593155 4876552 5023580 5134717 5214675
4594657 4876656 5023866 5140286 5214774
4602218 4876740 5023911 5140635 5216389
4605987 4879533 5025387 5142551 5220290
4616314 4885553 5027388 5142696 5220936
4617520 4887050 5028083 5144533 5222078
4628529 4890199 5028859 5146620 5222104
4629829 4896124 5029233 5148471 5222251
4633141 4896361 5036532 5148473 5230007
4636593 4897873 5038253 5150075 5230093
4636741 4903326 5040127 5150359 5233506
4648125
4903327
50420715175874
5150384 5260170
5233633
4794489
4972355
5087004
4649543
4904549
50458245182749
5151643 5260988
5235492
4797929
4972432
5093632
4654655
4904992
5053924
5152006
5237257
4797947 4972455 5095503 5185566 5261119
4680787 4905288 5055800 5152007 5237570
4798975 4975808 5107487 5185790 5262710
4704588 4905301 5055802 5153590 5239127
5
5
4
1
6 4802236 4977589 5109400 5187640 5263052
5260170
5260988
5261119
5262710
5263052
5263055
5265271
5267230
5276588
5276707
5276913
5276915
5278832
5278994
5280630
5280637
5280644
5285443
5287013
5287553
5287555
5287556
5289505
5297142
5299232
5301365
5308716
5321705
5321737
5321847
5323421
5325405
5325429
5327578
5327642
5331123
5333153
5336984
5338909
4711361
4715063
4717884
4730195
4731813
4736277
4737976
4741018
4742562
4761621
4764737
4775998
4791527
5630213
5630215
5631538
5633484
5633786
5634202
5640690
5642368
5646576
5649306
5649309
5656914
5656917
5657418
5659601
5660945
5661433
5664973
5666429
5668871
5670912
5673001
5673003
5673287
5674326
5675591
5675702
4912602
4916262
4918431
4918732
4922178
4941203
4942570
4945570
4956854
4959851
4963812
4964121
4970475
5715520
5715524
5717307
5722052
5724004
5726983
5729221
5732350
5737327
5737685
5738954
5739792
5740525
5742894
5745116
5745566
5745848
5747970
5748727
5754141
5754455
5754583
5754645
5754956
5758271
5760714
5761300
5055803
5057762
5058136
5059885
5060264
5063340
5065408
5067139
5070310
5077757
5077790
5081674
5083304
5805992
5807012
5808585
5808586
5809020
5809419
5809421
5809430
5809433
5809544
5812093
5812542
5812590
5814798
5815507
5815570
5815804
5815805
5815807
5815820
5821820
5822726
5826224
5831826
5832080
5832388
5835006
5157693
5160898
5162144
5163159
5164652
5166596
5166642
5168522
5170173
5170485
5170492
5175729
5175759
5864799
5865487
5867063
5867127
5867140
5867510
5870670
5872744
5877633
5878075
5878209
5878336
5878353
5880637
5880646
5881377
5889737
5889768
5889859
5892410
5893036
5894597
5896054
5896261
5898933
5900829
5901347
5241545
5241548
5241592
5241688
5242767
5243355
5247544
5247565
5249302
5251331
5255292
5257414
5259005
5940452
5940746
5943027
5945852
5945964
5946395
5949020
5950131
5950139
5953413
5954817
5955700
5955999
5956626
5963848
5963876
5964858
5966101
5966667
5966671
5969545
5974042
5977916
5980268
5982881
5983082
5987012
Patent Information
5343213
5349588
5351245
5359696
5361400
5363071
5365549
5366826
5367538
5367558
5371791
5373101
5375143
6018584
6018651
6018671
6021332
D284759
D285439
D288432
D288683
D289156
D292578
D292920
D295627
D295973
D295975
D296187
D297734
D297735
D297736
D299136
D299137
D299232
D300742
D300827
D301473
D301476
D301883
D302015
97
ST210_EN.BK Page 98 Thursday, May 11, 2000 2:56 PM
5678201
5678221
5678227
5680063
5684384
5691947
5692046
5692101
5696497
5696821
5699070
5699389
5699408
5701130
5701244
5701589
5703470
5703539
5703909
5706019
5706313
5708445
5710862
5710987
5711001
5375258
5379324
5381114
5384825
5392000
5392023
5392331
5396654
5401927
5402447
5402448
5404580
5404582
5406146
5406562
5408693
5410275
98
5761610
5764100
5764111
5764730
5764743
5766794
5771182
5771471
5777521
5777856
5784368
5784419
5784585
5787128
5787577
5793315
5793866
5796822
5797101
5798716
5799011
5799256
5801513
5801567
5802111
5475752
5477192
5485506
5485513
5486843
5487184
5488649
5490177
5491739
5493198
5493700
5493714
5495206
5495208
5497126
5497382
5497383
5835535
5835785
5838202
5841851
5842122
5844943
5846094
5848072
5848152
5848356
5848718
5850440
5854549
5854785
5854972
5856763
5856766
5857148
5857192
5859522
5859567
5859890
5861853
5862460
5862493
5553137
5553376
5554996
5555550
5557743
5559471
5559522
5559806
5561436
5561437
5561852
5565881
5566224
5568548
5570453
5572223
5572224
5901357
5903825
5903852
5905956
5907418
5907615
5909102
5910944
5912648
5920549
5920550
5923007
5924044
5925835
5925942
5926119
5926503
5926751
5930268
5930288
5930299
5933330
5936516
5936972
5939939
D325915
D327061
D327062
D328302
D332261
D332785
D334746
D337332
D338012
D338887
D339127
D339335
D339336
D339337
D339564
D339578
D339581
Patent Information
5988577
5995050
5996178
5999115
5999821
5999832
6002922
6002937
6005498
6006104
6008636
6009168
6009309
6009325
6009336
6009552
6011699
6011784
6011959
6011961
6012634
6014376
6014552
6016312
6016422
D348880
D349273
D349701
D350113
D350348
D350349
D350350
D351375
D351840
D352497
D352503
D352946
D353131
D353361
D353587
D353588
D353591
D303656
D304189
D305427
D305717
D306015
D306163
D306293
D306299
D306441
D306583
D306594
D307271
D309301
D309451
D314173
D315330
D315346
D315543
D315559
D315565
D315907
D316417
D316859
D320780
D322783
D372481
D372703
D372896
D372919
D373585
D373764
D374013
D374014
D374227
D374424
D374872
D375732
D375733
D375734
D375932
D375935
D375952
5410741
5414711
5420759
5424689
5428362
5428820
5428836
5430416
5432017
5434947
5436802
5438684
5442680
5444764
5446763
5446766
5448763
5448770
5448771
5453997
5457744
5459640
5459774
5461643
5463351
5463406
5463628
5463646
5463674
5463688
5463694
5465409
5465412
5469177
5471671
D324024
D324388
D325028
D325029
D325032
D325583
5499273
5499394
5499397
5502437
5504494
5504812
5506490
5508709
5509048
5510693
5511235
5513078
5513996
5519303
5519346
5519506
5519777
5524276
5526398
5528666
5530399
5530922
5533119
5535258
5535434
5539360
5542016
5542103
5542106
5542116
5544250
5546275
5546380
5551078
5551627
D348427
D348470
D348665
D348666
D348668
D348674
5574976
5577267
5577268
5583520
5584054
5586146
5588041
5589796
5590177
5594778
5594951
5598129
5598431
5600341
5604050
5604468
5604787
5606332
5606560
5606730
5613229
5613863
5615233
5615259
5615260
5621763
5621766
5625316
5625683
5628001
5628057
5628089
5629979
5630159
5630210
D369359
D369797
D370016
D370463
D370672
D372237
D339582
D340709
D340710
D340711
D340906
D341589
D342248
D342663
D342729
D342730
D342741
D343173
D343615
D343616
D343834
D343835
D343836
D344087
D344271
D344444
D344511
D344512
D344945
D345977
D346785
D346786
D346798
D348071
D348250
D394425
D394433
D394438
D394439
D395301
D395302
D395431
D395642
D395875
D396472
D397337
D354055
D354062
D355181
D355895
D356084
D356309
D357224
D357249
D357457
D357680
D357681
D358148
D359052
D359734
D359735
D359959
D360398
D360632
D361070
D361763
D362840
D362852
D365094
D365817
D366872
D367640
D368479
D368696
D369162
D411843
D411844
D412000
D412487
D412709
D413893
D413898
D414159
D415122
D415499
D416226
D376127
D377792
D377934
D378366
D378911
D379558
D379624
D379981
D379982
D380468
D380751
D381021
D381664
D382537
D382538
D382872
D383115
D383748
D383749
D383759
D384080
D384662
D384951
D384952
D385271
D385283
D385555
D385873
D385874
D397689
D397694
D398926
D400161
D400165
D400204
D417224
D417449
D419155
D419290
D419565
Other patents pending
ST210_EN.BK Page 99 Thursday, May 11, 2000 2:56 PM
Index
A
Accessories ...........................................89
Accessory setup menu ..........................81
Add entry
To phone memory .....................54, 85
To SIM card memory ..................54, 85
Adjust Contrast ....................................86
Adjust ring volume ...............................69
Alert tones ...........................................70
Assign Key to Feature ...........................37
Automatic answer ................................81
Automatic Handsfree ............................81
Automatic lock .....................................71
Automatic redial ...................................22
Auxiliary alert .......................................81
Available networks ...............................77
B
Bar incoming calls .................................61
Bar outgoing calls .................................61
Batteries
Charging .........................................15
Desktop charging .............................18
Fitting ..............................................17
Maintaining .....................................16
Removing ........................................16
Battery charge indicator ........................14
Battery meter .................................58, 84
Battery saving mode .......................73, 74
Blocked message ............................21, 72
Buttons
Smart button ...................................13
Start/Stop Record .............................13
Volume ............................................13
C
Call diverting ..................................59, 85
Call holding ..........................................27
Call metering ........................................79
Call meters menu .................................79
Call related features menu ....................58
Call timers ............................................80
Call Voicemail .......................................64
Call waiting ..........................................27
Calling a number ..................................22
Cancel all diverting .........................60, 85
Capacity
Checking battery capacity ................58
Checking Phone Book capacity ........55
Cell broadcast ......................................67
Battery saving mode ........................73
Messages .........................................64
Change bar password ...........................61
Change SIM PIN2 code .........................72
Change unlock code .............................71
Characters ......................................49, 50
Check capacity (of the Phone Book) ......55
Conference Call ...................................27
Call Waiting .....................................30
End Active And Held ........................27
Hold Call ..........................................26
Make a New Call .............................26
Reconnect ........................................27
Reconnect Held Call .........................27
Restrict My Number .........................26
Split Call ..........................................27
Switch .............................................27
Contrast
Adjust Contrast ................................86
adjusting ..........................................86
D
Delete
Last ten calls ....................................56
Message ....................................65, 66
Phone book entries ..........................54
Desktop charging of your battery .........18
Detailed diverting .................................60
Dialling phone book numbers ...............23
Display .................................................14
Adjusting the contrast ......................86
adjusting the contrast ......................86
Display characters ...........................49, 50
Displaying your own phone number .....56
Divert
Cancelling ........................................60
Fax calls ...........................................60
DTX ......................................................74
Index
99
ST210_EN.BK Page 100 Thursday, May 11, 2000 2:56 PM
E
Editing messages ................................. 64
Emergency calls ................................... 24
Ending a phone call ............................. 25
Entering characters ........................ 49, 50
Erase name and number ...................... 54
Extended menus .............................. 5, 73
F
Fault finding .................................. 91, 97
Find entry by location .................... 53, 85
Find entry by name ........................ 53, 83
Find new network ................................ 78
Fitting your battery .............................. 17
Fixed dialling ........................................ 56
Calling numbers .............................. 56
Setting ............................................ 57
H
Handsfree On/Off ................................ 26
Headset
Making and receiving calls .............. 13
Hold Call ............................................. 26
I
In use symbol ....................................... 14
Initiating Transfer Call .......................... 30
International phone calls ...................... 23
K
Key Answer Only ................................. 62
L
Language selection .............................. 73
Last ten calls .................................. 55, 84
100 Index
Lifetime timer ...................................... 80
Lock now ....................................... 71, 85
M
Making a phone call ............................ 22
Master clear ......................................... 75
Master reset ........................................ 74
Menus
Accessory setup menu ..................... 81
Call Diverting menu ........................ 59
Call meters menu ............................ 79
Call related features menu .............. 58
Extended menu ................................. 5
Messages menu .............................. 63
Network selection menu ................. 76
Options menu ................................. 41
Personalised menus ........................... 5
Phone Book menu ........................... 47
Phone setup menu .......................... 69
Quick Access menu ......................... 83
Send Messages menu ...................... 66
Short menu ....................................... 5
Message editor .............................. 66, 85
Message settings ................................. 67
Messages
Call holding/call waiting messages .. 28
Cell broadcast messages ................. 64
Creating and editing ....................... 64
Reading SMS messages ................... 64
Sending SMS messages ................... 66
Messages menu ................................... 63
Microphone
turning on or off ............................. 27
My phone number(s) ........................... 56
N
Names
Entering .................................... 49, 50
Network search ................................... 77
Network selection menu ...................... 76
Networks
Automatic search ............................ 77
Finding new networks ..................... 78
Manual search ................................ 77
New security code ............................... 73
O
One-touch dial setting ......................... 57
One-touch dialling ............................... 23
Options menu ..................................... 41
Outgoing messages ....................... 66, 85
P
Pauses
Inserting into phone numbers ......... 23
Personal numbers ................................ 53
Personalised menu ................................. 5
Phone book
Call number .................................... 54
Deleting/erasing entries ................... 54
Dialling phone book numbers ......... 23
Modify name or number ................. 54
Preventing access to ........................ 55
Storing numbers - see Add Entry ... 54
ST210_EN.BK Page 101 Thursday, May 11, 2000 2:56 PM
Phone calls
Automatic redial ..............................22
Dialling phone book numbers ..........23
Emergency calls ...............................24
Ending .............................................25
International ....................................23
Making ............................................22
One-touch dialling ...........................23
Receiving .........................................24
Phone setup menu ...............................69
Phone status .........................................74
PIN code
Entering ...........................................21
Setting and changing .......................72
PIN2 code .............................................72
Postscripting .........................................48
Prevent access (to Phone Book) .............55
Q
Quick Access features
Assign key .......................................37
Setup ...............................................37
Quick access menu ...............................83
Customising .....................................87
Quick Access Setup ..............................37
R
Reading SMS messages ........................64
Received messages ...............................65
Receiving a phone call ..........................24
Recording VoiceNotes .....................33, 67
Redialling the last number called ..........23
Removing your battery .........................16
Require SIM card PIN ............................72
Restrict My Number ..............................26
Restrict my phone number ..............58, 85
Return call ............................................65
Ring or vibrate ......................................70
Ring tones ............................................70
S
Safety timer ..........................................81
Screen
adjusting the contrast ......................86
Security code
Changing .........................................73
Select Phone Line .................................69
Sending SMS messages ........................66
Service centre .......................................68
Set in-call display ..................................80
Set Message Alert Tone ........................70
Set Ringer Tone ....................................70
Set Ringer Tone 2 .................................70
Set Time and Date ................................73
Set Time Format ...................................73
Setup fixed dialling ...............................57
Short menu ............................................5
Short message service symbol ...............14
Show battery meter ........................58, 84
Show call charges .................................79
Show call timers .............................79, 85
Show Services .......................................55
Show Time and Date ............................73
Signal strength symbol .........................14
SIM card
Insertion/removal .............................20
PIN code ....................................21, 72
PIN2 code ........................................72
Smart button ........................................13
SMS messages ......................................63
Special keys ..........................................13
Split Call ...............................................27
Start/Stop Record button ......................13
Status indicator ....................................15
Battery saving mode ........................73
Status review ........................................74
Switch ..................................................27
Symbols ...............................................14
T
Talk and fax .........................................60
Timers ..................................................80
Tones
Setting alert tones ............................70
Setting ringer tones .........................70
Transfer Call .........................................30
Troubleshooting .............................91, 97
Turn Mute On or Off ............................27
U
Unblocking your phone ........................72
Unlock code
Setting and changing .......................71
V
VibraCall ........................................70, 84
Index
101
ST210_EN.BK Page 102 Thursday, May 11, 2000 2:56 PM
Voice Activation
Phone Book entries ......................... 37
Quick Access features ..................... 39
Voice Dialling ................................. 37, 53
Voice Features ..................................... 33
Voice Control .................................. 35
VoiceNotes ...................................... 33
Voice Tag (Phone Book)
Adding or editing when entry exists 36
Adding when entry is new .............. 35
Deleting .......................................... 36
Voice Tag (Quick Access)
Adding or editing ............................ 38
Deleting .......................................... 38
Voicemail
Number .......................................... 67
VoiceNotes .................................... 33, 67
Recording ................................. 13, 33
Volume
Adjusting the earpiece and keypad volume
13
Adjusting the ringer volume ............ 69
Buttons ........................................... 13
W
What to do if... .............................. 91, 97
102 Index