Chauvet DMX-155 Omega I User manual

Q-Beam 260-LED QRG
Continued from previous page
ADVANCED
(Cont.)
Contact Us
Channel Function
Value
8
Gobo Wheel
Rotation
9
Prism
10
Dimmer
11
Shutter/Strobe
12
Control
000  060
061  150
151  165
166  255
000  127
128  255
000  255
000  031
032  063
064  095
096  127
128  159
160  191
192  223
224  255
000  019
020  039
040  059
060  139
140  149
150  159
160  169
170  179
180  189
190  199
200  219
220  255
Percent/Setting
360º Indexing
CW rotation (slow~fast)
No function
CCW rotation (slow~fast)
Prism off
Prism on
Dark  Bright
Close
Open
Strobe (Slow~Fast)
Open
Pulse strobe effect (Slow~Fast)
Open
Random strobe effect (Slow~Fast)
Open
No function
Pan/tilt black activation (3 s delay)
Pan/tilt black deactivation (3 s delay)
No function
Auto 1 (3 s delay)
Auto 2 (3 s delay)
Test (3 s delay)
Custom
Sound 1(3 s delay)
Sound 2(3 s delay)
Reset (3 s delay)
No function
World Headquarters
General Information
CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 929-1115
Fax: (954) 929-5560
Toll free: (800) 762-1084
Technical Support
Voice: (954) 929-1115 (Press 4)
Fax: (954) 756-8015
World Wide Web
www.chauvetlighting.com
Q-Beam 260-LED QRG – Rev. 01d
© Copyright 2010 CHAUVET®
All rights reserved
Printed in the P. R. C.
Page 8 of 8
Quick Reference Guide
Q-Beam 260-LED QRG
Q-Beam 260-LED QRG
About this The Q-Beam 260-LED Quick Reference Guide (QRG) only contains the
Guide product’s connection and mounting information as well as the menu options
and the DMX values.

Disclaimer 
Continued from previous page
BASIC
(Cont.)
This Quick Reference Guide DOES NOT replace the product’s user
manual, which you can download from the CHAUVET® Web site
(www.chauvetlighting.com).
You must read ALL the disclaimers and safety notes in this document as
well as those in the product’s user manual before installing, operating,
or maintaining this product.
Channel Function
9
Value
000  019
020  039
040  059
060  139
140  149
150  159
160  169
170  179
180  189
190  199
200  219
220  255
Control
Safety Notes  DO NOT open this fixture unless instructed. It contains no user












serviceable parts.
DO NOT aim this fixture toward the Sun. Otherwise, the lenses could
concentrate the solar energy and cause internal overheating.
DO NOT look at the light source when this fixture is on.
DO NOT touch the fixture when it is operating because it may be hot.
DO NOT cover the ventilation slots when the fixture is operating to
avoid internal overheating.
DO NOT install or operate this fixture where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
DO NOT carry this fixture from the head; use the handles instead.
DO NOT mount this fixture overhead without using a safety cable.
DO NOT operate this fixture outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
DO NOT operate this fixture if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
DO NOT connect this fixture to a dimmer or rheostat.
ONLY connect this fixture to a grounded and protected circuit.
What is  One Q-Beam 260-LED
Included  One IEC power cord with Edison plug (US market)




One safety cable
Two omega brackets
One Warranty Card
One Quick Reference Guide
ADVANCED
Channel Function
Value
1
2
3
4
5
Pan
Pan Fine
Tilt
Tilt Fine
Pan/Tilt Speed
6
Color Wheel
7
Gobo Wheel
Percent/Setting
No function
Pan/tilt black activation (3 s delay)
Pan/tilt black deactivation (3 s delay)
No function
Auto 1 (3 s delay)
Auto 2 (3 s delay)
Test (3 s delay)
Custom
Sound 1(3 s delay)
Sound 2(3 s delay)
Reset (3 s delay)
No function
Percent/Setting
000  255
000  255
000  255
000  255
000  255
000  015
016  030
031  045
046  060
061  075
076  090
091  105
106  120
121  235
136  255
0~540º
Fine movement control
0~270º
Fine movement control
Fast~Slow
White
Red
Yellow
Magenta
Green
Orange
Blue
Light green
Light blue
Rainbow or linear effect
000  010
011  020
021  030
031  040
041  050
051  060
061  070
071  080
081  095
096  110
111  125
126  140
141  155
156  170
171  185
186  255
No gobo
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
Continues on the next page
Page 2 of 8
Page 7 of 8
Q-Beam 260-LED QRG
Q-Beam 260-LED QRG
Features  9 or 12-channel DMX-512 LED moving yoke
DMX Values
BASIC
Channel Function
1
2
3
Value
Pan
Tilt
Color Wheel
4
Gobo Wheel
5
Gobo Wheel
Rotation
6
Prism
7
Dimmer
8
Shutter/Strobe
000  255
000  255
000  015
016  030
031  045
046  060
061  075
076  090
091  105
106  120
121  235
136  255
000  010
011  020
021  030
031  040
041  050
051  060
061  070
071  080
081  095
096  110
111  125
126  140
141  155
156  170
171  185
186  255
000  060
061  150
151  165
166  255
000  127
128  255
000  255
000  031
032  063
064  095
096  127
128  159
160  191
192  223
224  255
Percent/Setting
0~540º
0~270º
White
Red
Yellow
Magenta
Green
Orange
Blue
Light green
Light blue
Rainbow or linear effect
No gobo
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
360º Indexing
CW rotation (slow~fast)
No function
CCW rotation (slow~fast)
Prism off
Prism on
Dark  Bright
Close
Open
Strobe (Slow~Fast)
Open
Pulse strobe effect (Slow~Fast)
Open
Random strobe effect (Slow~Fast)
Open

















Pan: 540
Tilt: 270
Color wheel:
8 colors + white
Rainbow color spin at variable speeds
Gobo wheel 1:
Gobo shake
Indexing
Gobo rotation
7 gobos + open
Gobo wheel spin at variable speeds
3-facet, static prism
Variable electronic strobe
Variable electronic dimmer (0~100%)
Remote fixture reset
255 user-programmable steps without DMX controller
Move-in-black for pan/tilt
Built-in automated programs
Built-in sound activated programs
High-powered, 60 W (12.6 A) LED
User-selectable pan/tilt ranges
Automatic pan & tilt correction
Reset to factory settings option
User-selectable basic or advanced operating DMX modes
Continues on the next page
Page 6 of 8
Page 3 of 8
Q-Beam 260-LED QRG
Q-Beam 260-LED QRG
AC Power This product has an auto-ranging power supply that can work with an input
Menu Options
voltage range of 100~240 VAC, 50/60 Hz.
Main Level
Fuse
Replacement
1) Disconnect the unit from the power outlet.
2) With a flat head screwdriver, wedge the fuse holder out of its housing
and remove the blown fuse from its holder.
3) Replace the blown fuse with a fuse of the exact same type and rating.
4) Insert the fuse holder back in its place, and reconnect power.
Mounting Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
nd
2
3 Level
Address
Reset
001~512
No/Yes
DMX512
Auto 1
Auto 2
Sound 1
Sound 2
Custom
Test
Slave
Basic
Advanced
60 Close
Bright
No/Yes
Edition
Run
1. Intro
C Clamps (not included)
Safety cable (included)
Channels
Omega brackets (included)
Product
Mounting
Diagram
Overhead
Mounting
Display
Keylock
Info
Pan
Tilt
2. Invert
3. Range
Floor
Mounting
Control Panel
Description
Button
4. Special
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
<MENU>
5. Edit
Programming For details on how to program this product, please refer to the product’s
user manual.
Password
6. Default
rd
Level
Color
Use
P/Start
P/Finish
T/Start
T/Finish
Use
Black delay
Reset
Step
Pan
Tilt
Speed
Color
Gobo 1
Gobo 1 Rot
Dimmer
Strobe
Time
Use
Default
Normal/Reverse
Step
Linear
No/Yes
000~255
No/Yes
DMX
System
000~255
No/Yes
After being prompted to enter the password, press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Page 4 of 8
Page 5 of 8
Description
Selects a starting DMX address
Resets the fixture’s custom settings
Selects DMX512-A running mode
Selects the first automatic program
Selects the second automatic program
Selects the first sound activated program
Selects the second sound program
Selects the user customizable program
Selects the fixture’s test sequence
Selects the Slave running mode
Selects the 9-channel DMX mode
Selects the 12-channel DMX mode
Turns off the display after 60 s
Keeps the display on
Activates the control panel password
Shows the version of the installed S/W
Defines the pan direction
Defines the tilt direction
The color wheel moves in steps
The color wheel moves smoothly
Activates the changes
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
Activates the changes
Activates the move-in black delay (3 s)
The DMX controller can reset the fixture
The control panel can reset the fixture
Selects the program step
Selects the pan position
Selects the tilt position
Selects the pan/tilt speed
Selects the color (color wheel)
Selects a rotating gobo (static or shake)
Selects the gobo rotation mode
Selects the dimmer value
Selects the strobe frequency and mode
Selects the step duration
Activates the changes
Defaults the fixture to factory settings