Philips 32PFL5605H User manual

Register your product and get support at
www.philips.com/welcome
32PFL5605/98
40PFL5605/98
46PFL5605/98
32PFL5605S/98
40PFL5605S/98
46PFL5605S/98
EN
User manual
Downloaded From TV-Manual.com Manuals
EN
Addendum
You cannot play mp4 video files
that use the H.264 or AVC codec.
VI
FR
Addenda
La lecture de fichiers vidéo MP4
utilisant le codec H.264 ou AVC
n’est pas prise en charge.
ZH-CN 附录
您无法播放使用 H.264 或
AVC 编解码器的 MP4 视频文
件。
TH
ภาคผนวก
คุณไม่สามารถเล่นไฟล์วิดีโอ MP4 ที่
เข้ารหัสแบบ H.264 หรือ AVC ได้
ZH-HK 附錄
您無法播放使用 H.264 或
AVC 編碼的 MP4 影像檔。
Downloaded From TV-Manual.com Manuals
Phụ lục
Bạn không thể phát các tập tin
video MP4 sử dụng bộ giải mã
AVC hoặc H.264.
1 Notice
2
2 Important
3
3 Your TV
5
5
5
Side controls and indicators
Remote control
4 Use your TV
Adjust TV volume
Use teletext
9
9
5 Use more of your TV
10
Access TV menus
10
Change picture and sound settings
10
Use advanced teletext features
13
Create and use lists of favourite channels 14
Use timers
15
Use child control
15
Use the TV clock
16
View photos, play music and watch video
from a USB storage device
16
Use Scenea to display a picture as TV
Update the TV software
19
Change TV preferences
19
Start a TV demo
20
Reset the TV to factory settings
20
6 Install channels
Automatically install channels
Manually install channels
Rename channels
Reorder channels
23
23
23
23
24
24
25
26
Back connectors
Bottom connectors
Side connectors
Connect a computer
Add devices
Use Philips EasyLink
Use a Kensington lock
8 Product information
27
27
27
27
27
27
27
Supported display resolutions
Tuner/Reception/Transmission
Multimedia
Remote control
Power
Supported TV mounts
9 Troubleshooting
29
29
29
29
30
30
30
30
General TV issues
TV channel issues
Picture issues
Sound issues
HDMI connection issues
Computer connection issues
Contact us
10 Index
31
21
21
21
21
22
EN
Downloaded From TV-Manual.com Manuals
1
Eng lish
7 Connect devices
Contents
1 Notice
2010 Koninklijke Philips Electronics N.V. All
rights reserved.
-#
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
*"
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Philips cannot be held responsible either for any
errors in the content of this document or for
any problems as a result of the content in this
document. Errors reported to Philips will be
corrected and published on the Philips support
website as soon as possible.
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
;
!<
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual, shall void the warranty.
2
EN
Downloaded From TV-Manual.com Manuals
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the Electro Magnetic Field (EMF) standards
applicable at the time of producing the
products.
Philips is committed to develop, produce and
market products that cause no adverse health
!
"
handled properly for their intended use, they
#
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
Copyright
$%&'*$%&'#$#+%
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
All other registered and unregistered
trademarks are the property of their respective
owners.
Portions of this software are copyright © The
FreeType Project (www.freetype.org).
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
= Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
= Never place the TV, remote control or
X>"
sources, including direct sunlight.
*X
>"
"
TV, remote control and batteries at all
times.
=
Never insert objects into the ventilation
slots or other openings on the TV.
= When the TV is swivelled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
= Never expose the remote control or
batteries to rain, water or excessive heat.
= Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
!
Risk of injury or damage to the TV!
= Two people are required to lift and carry
a TV that weighs more than 25 kg or 55
lbs.
=
When stand mounting the TV, use only
the supplied stand. Secure the stand to
#!>*
surface that can support the combined
weight of the TV and the stand.
= When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
= Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
= Ensure that no part of the TV hangs over
the edge of the surface.
= Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
= Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
= The product/remote control may
contain a coin-type battery, which can be
swallowed. Keep the battery out of reach
of children at all times!
Risk of overheating!
= Q
!
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
= Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
EN
Downloaded From TV-Manual.com Manuals
3
Eng lish
2 Important
= Never place the TV or any objects on the
power cord.
= To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
= When you disconnect the power cord,
always pull the plug, never the cable.
= Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
= Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
= If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting the
TV to the power outlet.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Screen care
=
=
=
=
=
4
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
EN
Downloaded From TV-Manual.com Manuals
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environment and human
health.
Remote control
Eng lish
3 Your TV
Congratulations on your purchase, and
"
Z"
support that Philips offers, register your TV at
www.philips.com/welcome.
1
2
3
4
5
6
7
29
28
27
This section gives you an overview of
commonly used TV controls and functions.
26
25
8
Side controls and indicators
9
10
1
24
2
3
23
5
11
12
13
14
15
16
17
18
4
19
a
b
+/-: Increases or decreases volume.
: Selects connected devices.
20
c P/CH +/-: Switches to the next or
previous channel.
d Power switch: Switches the TV on or
off.
22
21
e Ambient sensor/ Standby indicator/
Remote control sensor
EN
Downloaded From TV-Manual.com Manuals
5
a
=
=
b
c
(Standby-On)
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
TELETEXT
Toggles teletext on or off.
SOURCE
Selects connected devices.
d Colour buttons
Select tasks, options or teletext pages.
Available in selected models only.
e SLEEP
Sets a delay after which the TV switches
to standby.
f DUAL
Switches Stereo and Nicam Stereo to
&!
##[%'\
or second language (Dual II) in bilingual
programmes.
g
(Home)
Toggles the home menu on or off.
h
OPTIONS
Accesses options relating to the current
activity or selection.
i OK
;"
!%
matrix of channels.
p
(Stop)
Stops disc play.
q
(Mute)
Mutes or restores volume.
r CH +/- (Channel +/-)
Switches to the next or previous channel.
s
FORMAT
Selects a picture format.
t 0-9 (Numeric buttons)
Selects a channel or setting.
u
PICTURE (Smart picture)
Launches the smart picture menu.
v
SOUND (Smart Sound)
Launches the smart sound menu.
w
+/- (Volume +/-)
Increases or decreases volume.
x
BACK A/CH
Returns to a previous screen.
Toggles between the current channel and
the last viewed channel.
y
BROWSE
Displays a matrix of channels.
z SCENEA (Wallpaper)
Displays wallpaper on your TV screen.
j
(Navigation buttons)
Navigate menus.
{ DEMO
Toggles the demonstration menu on or
off.
k
INFO
Displays programme information, if
available.
| TV
Switches back to the antenna source from
EasyLink mode.
l
(Backward)
Searches backward.
}
m
(Forward)
Searches forward.
n
(Play/Pause)
Starts, pauses or resumes disc play.
o
(Record)
Starts or stops video recording.
6
EN
Downloaded From TV-Manual.com Manuals
INCR. SURR
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
Remote control usage
Eng lish
When using the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight
between the remote control and TV is not
blocked by furniture, walls or other objects.
~5m
~30˚
EN
Downloaded From TV-Manual.com Manuals
7
4 Use your TV
Switch channels
This section helps you perform basic TV
operations (see ‘Use more of your TV’ on page
10).
Switch your TV on/off or to
standby
=
=
=
=
To switch on
= If the standby indicator is off, press Power
switch at the bottom of the TV.
= If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
= Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
Press BACK A/CH on the remote
control to return to the previously
viewed channel.
Press CH +/- on the remote control or
P/CH +/- on the side of the TV.
Press OK to use the channel matrix.
Enter a channel number using the
Numeric buttons.
Note
= When you use a favourite list, you can only
select those channels in the list.
Watch connected devices
Use the source button
To switch off
= Press the Power switch at the bottom of
the TV.
» The standby indicator switches off.
Tip
= Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
Downloaded From TV-Manual.com Manuals
1
Press
SOURCE.
» The source list appears.
2
Press or
device.
3
Press OK to watch the connected device.
to select the connected
Use teletext
1
Press TELETEXT.
» The main index page appears.
2
Select a page as follows:
= Press the Numeric buttons to enter
a page number.
to view the
= Press CH +/- or
next or previous page.
= Press the Colour buttons to select a
colour coded item.
= Pressing
BACK to return to the
previously viewed page.
3
Press
Note
= You can add new devices to the home menu
for easy access.
1
Press (Home).
» The home menu appears.
2
3
Press
to select the device.
Press OK to watch the connected device
on your TV.
Eng lish
Use the home menu
TELETEXT to exit teletext.
Adjust TV volume
To increase or decrease volume
= Press
+/- on the remote control or at
the side of the TV.
To mute or unmute sound
= Press to mute the sound.
= Press again to restore the sound.
EN
Downloaded From TV-Manual.com Manuals
9
4
5 Use more of
your TV
= After selecting [Add new device], follow the
on-screen instructions to select the correct
device and connector.
Menus help you to install channels, change
picture and sound settings and access other
features.
Access the home menu
The home menu gives you easy access to
connected devices, picture and sound settings,
and other useful features.
Press (Home).
» The menu screen appears.
Add new device
(Home) to exit.
Tip
Access TV menus
1
Press
Remove devices from the home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1
2
Press
Press
remove.
(Home).
to select a device to
3
Press OPTIONS.
» The [Remove device] list appears.
4
Press OK and select [Remove] to remove
the device.
» The selected device is removed from
the home menu.
Change picture and sound
settings
Setup
Watch TV
Change picture and sound settings to suit your
!^+
#
or change settings manually.
Use settings assistant
2
Press the
to select and navigate
through one of the following menus.
= [Watch TV] : Switches back to the
aerial source if another source is
selected.
= [Setup] : Accesses menus to change
picture, sound and other settings.
= [Add new device] : Adds new
devices to the home menu.
3
Press OK"!
10
EN
Downloaded From TV-Manual.com Manuals
Use the settings assistant to guide you through
the picture and sound settings.
1
2
3
Press
(Home).
Press
to select [Setup] >
[Picture] >[Settings assistant] .
Press OK.
» The [Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
=
|
"+
picture settings.
=
1
Press PICTURE.
» The [Smart picture] menu appears.
2
Press
to select one of the following
smart picture settings.
= [Personal] : Lists customised picture
settings.
= [Vivid] : Applies rich and dynamic
settings.
= [Standard] : Adjusts picture settings
to suit most environments and types
of video.
= [Movie] : Applies settings for movie
viewing.
= [Game] : Applies settings for games.
= [Energy saving] : Applies low-energy
settings.
3
Press OK"!
» The selected smart picture setting is
applied.
=
Manually adjust picture settings
1
2
3
=
=
=
=
=
=
Press
(Home).
Press
to select [Setup] >
[Picture].
» The [Picture] menu appears.
Press
to select from the following
settings and adjust:
[Smart picture]}~
+
smart picture settings.
[Contrast] : Adjusts the intensity of bright
areas, keeping dark areas unchanged.
[Brightness] : Adjusts the intensity and
details of dark areas.
[Colour] : Adjusts colour saturation.
[Hue] : Compensates for colour
variations. (Available only during video
playback.)
[Sharpness] : Adjusts sharpness in the
image.
=
=
=
=
=
=
[Noise reduction] : Filters and reduces
noise in an image.
[Colour temp.] : Sets the colour tones
to [Normal],[Warm] (reddish) or [Cool]
(bluish).
[Pixel Plus HD] : Fine-tunes each pixel to
match surrounding pixels. This produces a
*#+"#!
= [HD Natural Motion] : In selected
"
!`
>X
""
smoothly. You can switch HDNM on
or off.
= [100Hz Clear LCD] : Sets the
TV refresh rate to a maximum of
100Hz to provide superior motion
sharpness, better black level, high
>X+*{
image and a larger viewing angle.
= [Dynamic contrast] : Enhances
contrast.
= [Dynamic backlight] : Adjusts
brightness of the TV backlight to
match lighting conditions.
= [Colour enhancement] : Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
[Backlight] : Adjusts the backlight.
[PC mode] : Adjusts picture settings
when a PC is connected to the TV.
[Light sensor] : Adjusts settings
dynamically to match lighting conditions.
[Picture format] : Changes the picture
format.
[Horizontal shift] : Adjusts the picture
horizontally for PC-VGA or HD input.
[Vertical shift] : Adjusts the picture
vertically for PC-VGA or HD input.
EN
Downloaded From TV-Manual.com Manuals
11
Eng lish
Use smart picture
Change picture format
1
Press
FORMAT.
» A picture format bar appears.
2
Press
to select a picture format.
» The selected picture format is
activated.
3
Press OK"!
[Super zoom] : (Not
for HD and PC mode.)
Removes the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.
[4:3] : Shows the classic
4:3 format.
[Movie expand 16:9]
: (Not for HD and PC
mode.) Scales 4:3 format
to 16:9.
[Wide screen] : Scales 4:3
format to 16:9.
Summary of picture formats
The following picture settings can be
#!
[Unscaled] : For HD
and PC mode only,
and in selected models
only. Allows maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.
Note
= Depending on the format of the picture
source, some picture settings are not available.
Use smart sound
|
"
+
settings.
12
EN
Downloaded From TV-Manual.com Manuals
1
Press SOUND.
» The [Smart sound] menu appears.
2
Press
to select one of the following
smart sound settings.
= [Standard] : Adjusts sound settings
to suit most environments and types
of audio.
=
=
3
[News] : Applies settings for spoken
audio, such as news.
[Movie] : Applies settings for movies.
[Personal] : Applies the settings that
were customised in the sound menu.
Press OK"!
» The selected smart sound setting is
applied.
Use advanced teletext
features
Eng lish
=
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1
Press TELETEXT.
» The teletext screen appears.
Manually adjust sound settings
2
1
2
Press OPTIONS.
» The teletext options menu appears.
3
Press
to select one of the following
options.
= [Freeze page] : Freezes the current
page.
= [Dual/Full screen] : Enables and
disables dual screen teletext.
= [Reveal] : Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
= [Cycle subpage] : Cycles through
subpages automatically if subpages
are available.
= [Language] : Switches to a different
language group to display a language
correctly when it uses a different
character set.
4
5
Press OK"!
3
Press
(Home).
Press
to select [Setup] > [Sound].
» The [Sound] menu appears.
Press
to select and adjust:
= [Smart sound] : Accesses pre
"
#
!
= [Bass] : Adjusts the bass level.
= [Treble] : Adjusts the treble level.
= [Volume] : Adjusts the volume.
= [Balance] : Adjusts the balance of the
right and left speakers.
= [Dual I-II] : Selects audio languages if
dual sound broadcast is available.
= [Mono/Stereo] : Selects mono
or stereo if stereo broadcast is
available.
= [TV speakers] : Sets the TV speakers
on or off, or outputs sound to an
EasyLink-compliant device. This
option is available when you select
[EasyLink] in the [Preferences]
menu.
= [Surround] : Enables spatial sound.
= [Auto volume] : Automatically
reduces sudden volume changes, for
example, when switching channels.
= [Delta volume] : Corrects volume
differences between TV channels
and connected devices (switch
to your connected device when
adjusting [Delta volume]).
Press TELETEXT to exit the teletext
options menu.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1
Press TELETEXT.
» The teletext screen appears.
2
3
Select a teletext page with subpages.
4
Press
Press to enter a subpage.
» The subpage appears.
to switch between subpages.
EN
Downloaded From TV-Manual.com Manuals
13
Select T.O.P. teletext broadcasts
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
Add a channel to the favourite list
Tip
= View all channels before adding a channel to
the favourite list.
1
Press TELETEXT.
» The teletext screen appears.
1
2
When watching TV, switch to the channel
you want to add to a favourite list.
Press INFO.
» The T.O.P. overview appears.
2
Press
to select a channel to add
to the favourite list.
3
4
Press
3
Press OPTIONS.
» The channel options menu appears.
4
5
Press
6
Press
to select a subject.
Press OK to view the page.
Create and use lists of
favourite channels
You can create a list of your preferred TV
easily.
to select [Mark as favourite].
Press OK.
» The channel is added to the favourite
list.
BACK to exit.
Tip
= When watching TV, press
OPTIONS
> [Mark as favourite] to save the current
channel in the favourite list.
Select the favourite list
Remove a channel from the favourite
list
1
When watching TV, press OK to display
the channel grid.
2
Press OPTIONS.
» The channel options menu appears.
3
4
Press OK to select [Show fav. ch.].
5
Press
[All].
to select the favourites list or
Press OK.
» If you select the favourites list, only the
channels in the favourites list appear in
the channel grid.
» If you select [All], all the installed
channels appear in the channel grid.
6
Press
14
EN
BACK to exit the menu.
Downloaded From TV-Manual.com Manuals
Note
= Select the favourite list to edit, before
removing a channel (see ‘Select the favourite
list’ on page 14).
1
When watching TV, press OK to display
the channel grid.
2
Press OPTIONS.
» The channel options menu appears.
3
4
Press
5
Press
to select [Unmark as fav.].
Press OK.
» The channel is removed from the
favourite list.
BACK to exit.
You can set timers to switch the TV to standby
"!
8
9
Press OK"!
Press
BACK to exit.
Eng lish
Use timers
Tip
= Select [On timer] > [Activate] > [Off] to
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
+"!
disable [On timer].
= When [On timer] is [Off], only [Activate] can
be selected.
= Set the TV clock before activating [On
timer]feature.
Tip
= You can always switch off your TV earlier or
reset the sleeptimer during the countdown.
1
2
3
4
Press
(Home).
Press
to select [Setup] >
[Features] > [Sleep timer].
» The [Sleep timer] menu appears.
Press
to select a value between zero
"
!
» If set to zero minutes, the sleep timer
is switched off.
Press OK to activate the sleep timer.
» The TV switches to standby after the
"!
Use child control
You can prevent your children from watching
certain programs or certain channels by locking
the TV controls.
Set or change your PIN code
1
2
3
Automatically switch the TV on (on
timer)
You can switch on the TV from standby to a
"!
1
2
Press
Press
(Home).
Press
to select [Setup] >
[Features] > [Change/Set code].
» The [Change/Set code] menu appears.
Enter the code with the Numeric
buttons.
» ~"
#
"#
your code is created or changed.
Tip
= '#*€
override any existing codes.
(Home).
Press
to select [Setup] >
[Features] > [On timer].
Lock or unlock the TV
3
Press
to select [Activate] and set
a frequency -[Daily], [Once], or [Off].
Lock the TV to prevent access to all channels
and connected devices.
4
5
Press OK"!
6
7
Press
to select [Time] and set the
starting time.
1
2
Press [Done]"!
Press
to select [Programme no.]
and set the channel.
3
Press
(Home).
Press
to select [Setup] >
[Features] > [TV lock].
» A screen appears prompting you to
enter a code.
Enter your code using Numeric buttons.
EN
Downloaded From TV-Manual.com Manuals
15
4
5
Press
to select [Lock] or [Unlock].
Press OK.
» All channels and connected devices are
locked or unlocked.
Note
Display the TV clock
1
When watching TV, press OPTIONS.
» The TV options menu appears.
2
3
Select [Clock].
Press OK.
» The clock is displayed.
= If you select [Lock], you have to enter your
code every time you turn on your TV.
Note
= X
"
Lock or unlock one or more channels
1
When watching TV, press OK to display
the channel grid.
2
Press
or unlock.
3
4
Press
5
seconds.
= Set the TV clock again if you have switched
off/on your TV using the power switch.
to select a channel to lock
OPTIONS.
Press
to select [Lock channel] or
[Unlock channel].
View photos, play music and
watch video from a USB
storage device
For each selection, press OK to lock or
unlock the channel.
Caution
= Philips is not responsible if the USB storage
Note
= Restart the TV for the change to take effect.
device is not supported, nor is it responsible
for damage or loss of data from the device.
Your TV has a USB connector that enables you
to view photos, listen to music or watch movies
stored on a USB storage device.
Use the TV clock
You can display a clock on the TV screen.
Playback type
Pictures
Set the TV clock
Music
Video
1
2
3
Press
Press
JPEG (non-progressive
only)
MP3
MP4, RM
(Home).
Note
to select [Setup]
Select [Features] > [Clock] and press
OK.
» The [Clock] setup appears.
4
Enter the time with the Numeric
buttons.
5
Select [Done], then press OK.
» The time has been set.
6
To return to watching TV, press
16
EN
Downloaded From TV-Manual.com Manuals
twice.
= Only FAT or DOS-formatted USB storage
devices are supported. File names must not
ƒ
!
View a slide show of your photos
1
2
Turn on the TV.
1
3
Press (Home).
» The home menu appears.
When a full screen image of a photo is
displayed, press OK or
.
» A slide show begins from the selected
image.
2
Press:
= OK or
to pause the slide show.
» The icon appears.
4
5
Connect the USB storage device to the
TV.
Press
to select [Browse USB].
Press OK"!
» The USB content browser appears.
=
=
Tip
Press
or
to move between
images.
Press BACK or to stop the slide
show.
= Press
BROWSE to switch between
"
#
!
Change slide show settings
1
When viewing a slide show, press
OPTIONS.
» The slide show options menu appears.
2
Press
to select one of the following.
= [Start/Stop slide.] : Starts or stops a
slide show.
= [Slideshow trans.] : Sets the
transition from one picture to the
next.
= [Slideshow freq.] : Sets the amount
of time that a picture is shown.
= [Rotate image] : Rotates a picture.
= [Set as wallpaper] : Sets the image as
wallpaper.
= [Show info] : Displays the picture
name, date and size of the picture in
the slide show.
3
Press OK"
#!
Disconnect a USB storage device
Caution
= Follow this procedure to avoid damage to your
USB storage device.
1
2
Press
(Home) to exit the [USB] menu.
disconnecting the USB storage device.
View photos
1
In the USB content browser, select
[Picture] and press to enter.
2
Press BROWSE to switch between
"
#
!
3
4
Press
to select a photo.
Press OK to view the selected photo in
full screen mode.
Note
= [Rotate image] and [Show info] appear only
when you press OK or
show.
Tip
= When in full screen mode, press
to pause the slide
to move
between photos.
Listen to music
1
2
3
Connect a USB storage device to the TV.
Press
to enter the menu.
Select [Music], and then press
the [Music] folder.
to enter
EN
Downloaded From TV-Manual.com Manuals
17
Eng lish
Browse the USB storage device
4
5
Press
or
to select a song.
Press OK or
to play the song.
= Press OK or
to pause, press OK
or
again to resume.
= Press
to search-forward.
= Press
to search-backward.
= Press to stop playback.
View a slideshow with music
Use Scenea to display a
picture as TV wallpaper
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to home (see ‘Change
TV preferences’ on page 19).
Activate Scenea
You can view a picture slide show with
background music.
1
While the TV is on, connect the USB
storage device containing your pictures
and the music to the TV.
2
3
Press
Press
[Music].
(Home).
Single-picture wallpaper
Press SCENEA on your remote control.
» The default or pre-loaded picture is
displayed.
to select [Browse USB] >
Note
4
Press
to select an album of songs
and press OK.
5
Press
BACK to return to the USB
content browser.
6
7
Press
to select [Picture].
Press
to select an album of
pictures and press OK.
In the USB content browser, press
enter the [Video] folder.
2
3
Press
control button except , SMART SOUND,
or
SMART PIC.
= The wallpaper is also deactivated when you
connect a USB storage device to the TV or
start an EasyLink-compliant device through
one-touch play.
Wallpaper slide show
Make sure the wallpaper is not yet activated.
Watch video from a USB device
1
= To deactivate the wallpaper, press any remote
to
1
2
to select a video.
Press OK or
to play the video.
= Press OK or
to pause, press OK
or
again to resume.
= Press
to search-forward.
= Press
to search-backward.
= Press to stop playback.
Connect a USB storage device to the TV.
Press SCENEA.
» All pictures in the USB storage device
are displayed.
Note
= If the sleep timer is off, the wallpaper is
displayed for 120 minutes. Otherwise, it is
displayed for the duration of the sleep timer.
Upload a wallpaper picture from a
USB device
Make sure your USB storage device contains a
picture of less than 1MB.
1
EN
Downloaded From TV-Manual.com Manuals
While the TV is on, connect the USB
storage device containing your pictures to
the USB connector at the side of your TV.
3
4
5
6
Press (Home).
» The home menu appears.
Press
to select [Browse USB].
Press
to navigate to the picture of
your choice.
Press SCENEA.
» Your picture is stored as the default
Scenea picture in your TV.
Disconnect the USB storage device.
Adjust wallpaper settings
1
2
3
Press
3
4
(Home).
Select [Setup] > [Features] > [Scenea].
Press
to select from the following
settings:
= [Activate] : Enters the Scenea mode.
= [ECO] : Applies low-energy settings.
Select [On] to display wallpaper with
lower brightness.
Note
%"
„'+!
;!#
directory of the USB device.
Eng lish
2
Update software (analogue
broadcasts)
Before you perform this procedure, make sure
you have:
= Enough time to complete the entire
update.
= A USB storage device with at least 64MB
of storage space.
= Access to a computer with a USB port
and internet access.
1
2
Switch on the TV set.
3
Press
to select [Setup] >
[Software update] > [Local update].
4
5
Press OK.
Connect the USB storage device to the
TV.
Follow the on-screen instructions to
complete the software update.
= Select the [ECO] setting before you select
[Activate] to display Scenea wallpaper.
Change TV preferences
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1
2
Press
(Home).
Select [Setup] > [Software update] >
[Current software].
Download the software
1
On your PC, open a web browser and go
to www.philips.com/support.
2
Download the latest software upgrade
;!
Downloaded From TV-Manual.com Manuals
The [Preferences] menu allows you to
customise various features and functions.
1
2
Press
(Home).
Select [Setup] > [Installation] >
[Preferences].
= [Location] : Optimises TV settings
for your location - home or shop.
= [Volume bar] : Displays the volume
bar when you adjust the volume.
= [EasyLink] : Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
= [Pixel Plus Link] : Overrides the
settings of connected devices and
uses the settings of the TV.
= [E-sticker] : For shop mode only.
Sets the location of the e-sticker.
EN
19
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
2
3
Press DEMO on the remote control.
Press
to select a demo and press OK
to view it.
Press DEMO to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
2
Press
3
Press OK or to enter the [Factory
settings] menu.
» [Reset] is highlighted.
4
5
Press OK to reset to factory settings.
20
EN
(Home).
Select [Setup] > [Installation] > [Factory
settings].
Press
(Home) to exit.
Downloaded From TV-Manual.com Manuals
Step 2 Search and store new TV
channels
Automatically install channels
1
2
This section describes how to search and store
channels automatically.
1
2
Press
Eng lish
6 Install channels
(Home).
Press
to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
3
Press
[Search].
4
Press Numeric buttons to manually enter
the three-digit frequency.
5
Press OK to begin search.
» If a channel is unavailable at the
selected frequency, the system searches
for the next available channel.
Manually install channels
6
Press
found.
This section describes how to search and store
analogue TV channels manually.
7
Press
to select [Store new channel]
to store the new channel under a new
channel number.
Step 1 Select the colour and sound
system
8 Press to enter [Store new channel].
9 Press OK to store the new channel.
10 Press (Home) to exit.
3
4
1
2
3
Press
(Home).
Select [Installation] > [Channel install.]
> [Channel assistant].
Press OK.
Follow the on-screen instructions to
install channels.
Press
(Home).
Press
to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
Press
to select and enter [Colour
system].
» A list of available colour systems
appears.
to select and enter
BACK when the new channel is
Rename channels
You can rename channels. The name appears
when you select the channel.
1
When watching TV, press OK to display
the channel grid .
Select the channel you want to rename.
4
Press
to select your colour system
and then press OK.
2
3
5
Press to return to the [Analogue:
Manual] menu.
4
Press
to select and enter
[Rename chan.].
» A text input box appears.
5
6
Press
6
7
Press
to select and enter [Sound
system].
» A list of available sound systems
appears.
Press
to select your sound system
and then press OK.
Press OPTIONS.
» The channel options menu appears.
to select characters.
Press OK"
characters.
EN
Downloaded From TV-Manual.com Manuals
21
Tip
= Rename channels - a channel name can be up
to six characters long.
= Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
Reorder channels
After you install channels, you can rearrange the
order in which they appear.
1
When watching TV, press BROWSE
repeatedly until the channel grid is
displayed.
2
Press OPTIONS.
» The channel options menu appears.
3
Press
[Reorder].
4
Select the channel you want to reorder
and press OK.
» The selected channel is highlighted by
a yellow border.
5
Press
to select the new position
for the channel.
» The new position is highlighted by a
blue border.
6
7
Press OK"
!
8
Press OK
#!
22
EN
to select and enter
Press OPTIONS.
» [Done reordering] appears.
Downloaded From TV-Manual.com Manuals
Bottom connectors
Eng lish
7 Connect devices
This section describes how to connect
various devices with different connectors and
supplements examples provided in the Quick
Start.
Note
= Different types of connectors may be used to
connect a device to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your
product is available at www.connectivityguide.
philips.com.
Back connectors
a CVI 1 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
b DIGITAL AUDIO OUT
Digital audio output to home theatres
and other digital audio systems.
c ANTENNA
Signal input from an antenna, cable or
satellite.
d VGA and AUDIO IN
Audio and video input from a computer.
e HDMI
Digital audio and video input from high#
…+
!
a CVI 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
Side connectors
b SERV. U
For use by service personnel only.
c AV IN (S-VIDEO, VIDEO, and AUDIO
L/R)
Video input for analogue devices such as DVD,
camcorder, game console etc. To be used with
audio input.
a USB
Data input from USB storage devices.
b HDMI
Digital audio and video input from high#
…+
players.
EN
Downloaded From TV-Manual.com Manuals
23
Connect a computer
=
=
=
Before you connect a computer to the
TV, set the monitor refresh rate on your
computer to 60Hz.
Connect your computer to the TV.
FORMAT and change the TV
Press
picture format to [Unscaled].
AUDIO IN
DVI/VGA
DVI
Connect a computer with one of the
following connectors:
=
Note
VGA cable
= Connections via DVI or VGA require an
additional audio cable.
=
AUDIO IN
DVI/VGA
HDMI cable
VGA
VGA
=
DVI-HDMI cable
Add devices
AUDIO IN
DVI/VGA
After connecting devices, assign the device
attached to each connector. This allows you to
easily identify devices connected to your TV.
DVI
=
24
HDMI cable and HDMI-DVI adaptor
EN
Downloaded From TV-Manual.com Manuals
1
2
3
4
Press
5
Press or to select the connector
your device is connected to and press .
6
If available, press or to select the
audio connector your device is connected
to and press .
7
Switch on your device and check for
video and audio output.
(Home).
Select [Add new device] and press OK.
Select [Start] and press OK.
Press
.
or
to select a device and press
If there is video and audio output, press
OK.
Repeat the procedure until all devices are
correctly assigned to connectors.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
= Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
Note
= The EasyLink-compliant device must be
switched on and selected as the source.
EasyLink features
One-touch play
When you connect your product to devices
that support one-touch play, you can control
your product and the devices with one
remote control. For example, when you press
Play on your DVD remote control, your TV
automatically switches to the correct channel
to show the DVD content.
One-touch standby
When you connect your TV to devices that
support standby, you can use your TV remote
control to put your TV and all connected
HDMI devices in standby mode.
System audio control
When you connect your TV to HDMI
CEC compliant devices, your TV can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your TV.
You can use the remote control from the
connected device to adjust the volume.
Remote control (RC) key forwarding
RC key forwarding allows you to control
EasyLink-compliant devices using your TV
remote control.
EasyLink buttons
You can control EasyLink-compliant devices
with the following buttons on the remote
control of your TV.
Button
EasyLink function
(Play/ Starts, pauses or resumes
Pause)
playback on your EasyLink
device.
(Stop) Stops playback on your EasyLink
device.
Starts or stops video recording
(Record) on your EasyLink device.
(Fast Searches backward.
Backward)
(Fast Searches forward.
Forward)
0-9
When EasyLink is enabled,
(Numeric selects a title, chapter or track.
buttons)
Navigates through the menus of
the EasyLink-compliant device.
OK
Activates a selection or accesses
the menu of the EasyLinkcompliant device.
Displays the menus of the
OPTIONS EasyLink-compliant device. Press
(Home) to display the TV
menu.
When EasyLink is enabled,
(Standby- switches the TV and all EasyLink
On)
devices to standby. Press and
hold (Standby-On) for at least
3 seconds.
EN
Downloaded From TV-Manual.com Manuals
Eng lish
8
25
Use a Kensington lock
Tip
= Press TV to switch back to the aerial source
from EasyLink mode.
Enable or disable EasyLink
Note
= Do not enable Philips EasyLink if you do not
intend to use it.
1
2
Press
3
Select [ON] or [OFF].
(Home).
Select [Installation] > [Preferences] >
[EasyLink].
Enable or disable remote control key
forwarding
1
2
3
4
5
Press
OPTIONS.
Select [En./Dis. RC pass.].
Press OK.
Press or
connector.
to highlight an HDMI
Press OK to enable RC key forwarding
for the selected HDMI connector.
Set TV speakers to EasyLink mode
When you play content from an EasyLink
compliant home theater, the TV speakers are
automatically muted.
1
2
Press
(Home).
Press
to select [Setup] > [Sound].
» The [Sound] menu appears.
3
Select [TV speakers].
» The [TV speakers] menu appears.
4
Select [Auto (EasyLink)].
» TV speakers are set to EasyLink mode.
26
EN
Downloaded From TV-Manual.com Manuals
There is a Kensington security slot at the
bottom of the TV. Prevent theft by looping
a Kensington lock between the slot and a
permanent object, such as a heavy table.
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
Supported display resolutions
Computer formats (HDMI/VGA)
Resolution
‰ŠƒŠ
ƒ‰
Šƒ‹‰
ƒŠ
Œ‰ƒ‹‰
‡ƒ
Refresh rate (Hz)
60
60
60
60
60
60
Video formats (HDMI/YPbPr)
Resolution
‹ƒŠ
720 x 576i
‹ƒŠ
720 x 576p
ƒ‹
‡ƒ
‡ƒ
Refresh rate (Hz)
60
50
60
50
50, 60
50, 60
24, 25, 30, 50, 60
Tuner/Reception/
Transmission
Multimedia
Eng lish
8 Product
information
= Connection: USB
= Playback formats: MP4, JPEG, JPG, MP3
Video playback via USB:
Container Video
codec
Mpeg1
Mpeg-1
Mpeg4
Mpeg-4
RealMedia Real
Media
‡
Audio
codec
Mpeg
audio
AAC
AAC,
Cook
File
extension
.dat
.mpg
.avi
.mp4
.rm
.rmvb
Remote control
=
Batteries: 2 x AAA (R03 type)
Power
=
=
=
Mains power: AC 220-240 (50-60Hz)
Standby power: < 0.15W
Ambient temperature: 5 to 40 degrees
Celsius
Supported TV mounts
To mount the TV, purchase a Philips TV mount.
To prevent damage to cables and connectors,
be sure to leave a clearance of at least 2.2
inches or 5.5cm from the back of the TV.
Warning
=
=
=
Antenna input: 75ohm coaxial (IEC75)
TV system: PAL
Video playback: NTSC, PAL
= Follow all instructions provided with the TV
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
EN
Downloaded From TV-Manual.com Manuals
27
TV screen
size
Wall bracket type
32” - 40” 200 x 200 mm
46” - 52” 300 x 300 mm
Screw size
M6
&
%
#
-#
without notice.
32PFL5605
= Without TV stand
= Dimension (WxHxD): 790 x 501 x
92 (mm)
= Weight: 10 kg
= With TV stand
= Dimension (WxHxD): 790 x 542 x
221 (mm)
= Weight: 11.5 kg
40PFL5605
= Without TV stand
= Dimension (WxHxD): 977 x 605 x
‰[""\
= Weight: 13.7 kg
= With TV stand
= Dimension (WxHxD): 977 x 649x
236 (mm)
= Weight: 16.1 kg
46PFL5605
= Without TV stand
= %"
[ƒ$ƒ%\}ƒ‰ƒ
‹[""\
= Weight: 17.9 kg
= With TV stand
= Dimension (WxHxD): 1122 x 731 x
‰[""\
= Weight: 21.3 kg
Note
= %
#
-#
without notice.
EN
Downloaded From TV-Manual.com Manuals
This section describes commonly encountered
issues and accompanying solutions.
General TV issues
The TV does not switch on:
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
Check that the power cable is securely
connected.
The remote control is not working properly:
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
Replace the remote control batteries if
>X!
Clean the remote control and TV sensor
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock the child lock
feature
’€!
The TV menu is in the wrong language.
Change the TV menu to your preferred
language.
When turning the TV on/off/to standby, you
hear a creaking sound from the TV chassis:
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
TV channel issues
Previously installed channels do not appear in
the channel list:
Check that the correct channel list is
selected.
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
There is sound but no picture:
Check that the picture settings are
correctly set.
There is poor TV reception from an antenna
connection:
Check that the antenna is properly
connected to the TV.
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
-
>{!
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
!
There is poor picture quality from connected
devices:
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
The TV did not save your picture settings:
= Check that the TV location is set to the
home setting. This mode offers you the
>ƒ#
#
!
"
big or too small:
Try using a different picture format.
The picture position is incorrect:
Picture signals from some devices may
!;X
signal output of the device.
EN
Downloaded From TV-Manual.com Manuals
29
Eng lish
9 Troubleshooting
Sound issues
Computer connection issues
There is a picture but sound quality is poor:
The computer display on the TV is not stable:
Check that your PC uses the supported
resolution and refresh rate.
Set the TV picture format to unscaled.
Note
= If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
Check that all cables are properly
connected.
Check that the volume is not set to 0.
Check that the sound is not muted.
There is a picture but the sound quality is
poor:
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
Verify that sound balance is set to the
centre.
Contact us
If you cannot resolve your problem, refer to
the FAQs for this TV at www.philips.com/
support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.
Warning
= Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter
or HDMI to DVI cable, check that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).
30
EN
Downloaded From TV-Manual.com Manuals
Note
= Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
A
antenna
23
B
back connectors
batteries
bracket for wall mount
23
27, 4, 29
27
demo
devices
devices
add to home menu
remove
digital services
teletext
disconnect USB
display
resolution
dispose
20
23
10, 24
10
9, 13
17
27
4
C
care
channels
install
automatic
manual
lock
rename
reorder/rearrange
troubleshooting
tune
child lock
lock channels
lock connected devices
PIN code
computer
connect
display resolution
connect
antenna
PC
power cord
connectors
back connectors
HDMI
overview
side connectors
USB
controls
4
21
21
16
21
22
29
21
EasyLink
disable
enable
system audio control
end of life
environmental care
e-sticker
26
26
26
4
4
19
F
factory settings
16
15
29, 15
30
27
20
H
HDMI
home mode
30, 23, 23
19
I
23
30
23
23
30, 23
23
23
16
5
D
default settings
E
20
install channels
automatic
manual
21
21
K
Kensington lock
26
L
language
menu
troubleshoot
location
29
29
EN
Downloaded From TV-Manual.com Manuals
31
Eng lish
10 Index
home or shop
lock
Kensington lock
lock channels
lock connected devices
PIN code
19
26
16
15
29, 15
M
menu
language
main menu
teletext
troubleshooting
MHEG teletext
MPEG artifact reduction
multimedia
music
USB
mute TV speakers
29
10, 10
13
29
9
11
27
17
26
O
on timer
15, 15
P
PC
connect
resolution
picture format
change
troubleshooting
picture settings
PIN code
pixel plus link
power
preferences
30
27
12
29
10
29, 15
19
27, 29, 5
19
27
27, 4
5
26
‹
29
21
22
27
20
S
safety
screen care
screen saver
settings
picture
sound
settings assistant
shop mode
side connectors
side controls
slideshow
view
"
smart picture
smart settings
smart sound
software
update
version
sound settings
standby
subpages in teletext
switch
3
4
10, 11
13, 10
10
19
23
5
17
11
11, 12
12
19
19
12, 13
27
*‡
13
T
R
rearrange channels
reception
recycle
register product
remote control
32
batteries
overview
RC pass-through
troubleshooting
rename channels
reorder channels
resolution
restore default
EN
Downloaded From TV-Manual.com Manuals
22
29
4
5
Table of Pages
teletext
features
menu
subpages
14
27
13
13
13
Contact information
België/ Belgique
0800 80 190 Gratis / Gratuit
ß CHAT www.philips.com/support
#$%&'*;<
00800 11 544 24
=>?
800142840 Bezplatný hovor
@
3525 8759 Lokalt opkald
ß CHAT www.philips.com/support
@
0800 000 7520 gebührenfreier Anruf
ß CHAT www.philips.com/support
JQQZ\^
0 0800 3122 1280
”•–—˜™š›œ™›žš—˜
_`
900 800 655 Teléfono local gratuito
solamente para clientes en España
ß CHAT www.philips.com/support
_
6008600 kohalik kõne tariifi
{
0805 025 510 numéro sans frais
ß CHAT www.philips.com/support
|}
0800 222778 free
~
01 601 1777
~
800 088774 Numero Verde
'€'‚ƒ'„
+7 727 250 66 17 local
…}
52737691 local
}
08 5792 9100 Lokalsamtal
…
67228896 local
‡‰‡}‰‰
0800 002 050
Schweizer Festnetztarif/ Tarif réseau
fixe France
…†?‡…†?
40 6661 5644
Ortsgespräch/Appel local
ˆ‰>
0680018189 Ingyenes hívás
Š
0800 0230076 Gratis nummer
09 2311 3415 paikallispuhelu
’
‰ŒŒ²³"
Š
22 70 81 11 Lokalsamtale
“”
General No: 0800 331 6015 free
General National Rate No:
0870 911 0036 National rate
‹
0800 180 016
•–*'—„‚˜–'
0-800-500-697
00800-311-13-18
Pozosta?e produkty RTV oraz AGD
800780903 Chamada Grátis
Œ‚‚;<
(495) 961-1111
8-800-200-0880
[ ¡¢£¤¥¦§¨ª«¬­§­®£­¯­¢¢±±\
Ž
0800-894910 Apel gratuit
0318107125 Apel local
*;‘'
+381 114 440 841 Lokalni poziv
}
0800 004537 Bezplatný hovor
}
00386 12 80 95 00 lokalni klic
This information is correct at the time of print! For updated information, see www.philips.com/support.
Downloaded From TV-Manual.com Manuals
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 3139 125 41581
Downloaded From TV-Manual.com Manuals