MODPac™ II 1 to 5-Ton Vertical Wall Mount Air Conditioners

ModPac™ II 1 to 5-Ton Vertical
Wall Mount Air Conditioners
Models AVPA12-20-24-30-36-42-48-60
General Description
The Marvair® ModPac™ II air conditioner
is a vertical, wall mounted, cost effective air
conditioner designed for a variety of building types
and applications. The unit is manufactured in eight
sizes from 1 to 5 tons. Electric heat may be field
or factory installed. Disconnects are standard on
all units including the 460v. models. Accessories
include a full range of grilles and thermostats.
Cabinet color choices include standard Marvair
beige and grey as well as other options. A Marvair
first, the built-in mounting flanges simplifies
installation. The sloped top, another Marvair
original, eliminates the need for a rainhood.
Outside Air for Ventilation or
Free Cooling
A full range of accessories and options allows
the ModPac air conditioners to be optimized for
each application. For classrooms, a complete
range of ventilation options are available to meet the fresh
air requirements of the ASHRAE 62 standard. To insure
proper operation and optimum performance, all outside
air ventilation packages are non-removable and factory
installed.
Dehumidification
The introduction of outside air can cause humidity levels
to rise to unacceptable levels. To reduce humidity, ModPac
air conditioners can be ordered with electric resistance reheat or a Hot Gas
Reheat (HGR) coil. The HGR coil allows the air conditioner to dehumidify without
adversely lowering the temperature in the classroom and uses less energy than
electric reheat. See page 4 for a detailed description of the operation of the Hot
Gas Reheat Coil.
Safety Listed & Energy Certified
All ModPac air conditioners are built to UL standard 1995, 2nd edition and
CAN/CSA C22, No. 236-5, 2nd edition. For energy efficiency and performance,
the units are tested and rated in accordance to the ANSI/ARI (Air-Conditioning
and Refrigeration Institute) Standard 390- 2003 (Single Package Vertical Units).
All AVPA units meet or exceed the efficiency requirements of ANSI/ASHRAE/
IESNA 90.1.2007. The ModPac air conditioners are commercial units and are not
intended for use in residential applications.
1
PDS 97/2012 Rev. 9
ModPac II PDS ModPac
7/2012 rev.
Standard Features
Ease of Installation
•Factory installed disconnect may eliminate
need of outside disconnect.
•Built-in mounting flanges eliminate need for
side brackets.
•Sloped top sheds water and minimizes
chance of water leaks.
•Designed for installation in a modular
builder's facility.
Attractive and Built for Long Term
Operation
•Choice of colors - beige, white, grey, light
brown.
•Decorative coil guard.
•High efficiency compressors provide reliable
and quiet operation.
Ease of Service
•Service access valves.
•All components accessible for field service.
•Nationwide network of service centers.
Quiet
•Twin blowers sized to accept full duct
system.
•High and low refrigerant switches
•High density, foil backed insulation complies
with codes that require a cleanable surface
for the indoor air path.
M5 Configuration
The M5 configuration of the ModPac II air conditioner features the following as standard.
PC Board
Each ModPac air conditioner has a PC board that controls the operation of the indoor blower and
the compressor while providing high refrigerant pressure and low refrigerant protection. User
selectable pins and potentiometers permit multi-function control. LED’s indicate operational status
and fault conditions. A dedicated relay controls allows control of the two position motorized fresh
air damper (Ventilation Configurations “B” & “Z”).
LED Indicator Lights
COLOR
TYPE
Green
Power
Red
Status
STATUS
DESCRIPTION
Constant On
Constant On
1 Blink
2 Blinks
3 Blinks
24 VAC power has been applied
Normal Operation
High pressure switch has opened twice
Low pressure switch has opened twice
Freeze stat (optional) - indoor coil temperature is below 35°F (1°C)
Modes of Operation
Normal Start-up: On a call for cooling, and the with the high pressure switch closed, the cooling
system
(compressor, indoor blower motor and outdoor fan motor) will be energized. (Note: See the Delay
on Make feature). The cooling system will remain energized during the three minute low pressure
switch bypass cycle. If the low pressure is closed, the cooling system will continue to operate after
the three-minute bypass. If the low pressure switch is open after the three-minute bypass, the
cooling system will be de-energized.
Lockout Mode: If either the high or low pressure switch opens twice on the same call for cooling,
the control board enters into the lockout mode. In the lockout mode, the compressor is turned off,
the alarm output is energized and the status LED’s will blink to indicate which fault has occurred.
If there is a call for air flow, the indoor blower will remain energized. When the lockout condition
has cleared, the unit will reset if the demand of the thermostat is removed or when power is reset.
The lockout circuit is factory wired for normally open contacts. The user can now have normally
closed contacts by moving a wire on the control board.
Delay on Make: On initial power up or on resumption of power, the air conditioner will wait .03 to
10 minutes from a call for cooling before allowing the contactor to energize.
In addition to the PC board, the M5 configuration has high and low refrigerant pressure switches
and foil backed insulation lines the indoor air path. A low ambient fan cycle control is available as
an option.
ModPac PDS 7/2012 Rev. 9
2
Grilles & Thermostats
Grilles
Grilles for the AVPA12
Description
Double Deflection, Aluminum
Aluminum Return Grille
Return Filter Grille
Grilles for the AVPA20/24
Double Deflection, Aluminum
Aluminum Return Grille
Return Filter Grille
Grilles for AVPA30/36
Double Deflection, Aluminum
Aluminum Return Grille
Return Filter Grille
Grilles for AVPA42/48/60
Double Deflection, Aluminum
Aluminum Return Grille
Return Filter Grille
Supply Grille
Size
17” x 5” (432mm x 127mm)
17” x 10” (432mm x 254mm)
17” x 10” (432mm x 254mm)
Marvair P/N
80682
92352
80683
Supply Grille
20” x 8“ (509mm x 203mm)
20” x 12” (509mm x 305mm)
20” x 12” (509mm x 305mm)
80674
80677
80671
Supply Grille
28” x 8“ (711mm x 203mm)
28” x 14” (711mm x 356mm)
28” x 14” (711mm x 356mm
80675
80678
80672
Supply Grille
30” x 10“ (762mm x 254mm)
30” x 16” (762mm x 406mm)
30” x 16” (762mm x 406mm)
80676
80679
80673
Note: Return filter grilles should be used when the filter in the ModPac unit is not accessible from the exterior of the building.
Thermostats
Thermostat, P/N 50121
Digital thermostat. 1 stage heat, 1 stage cool. Non-programmable. Fan switch: Auto & On.
Manual changeover system switch: Cool-Off-Heat. Low temperature protection. °F or °C selectable.
Thermostat, P/N 50123
Digital thermostat. 1 stage heat, 1 stage cool. 7 day programmable. Fan switch: Auto & On.
Auto-changeover. Keypad lockout. Non-volatile program memory. Title 24 compliant - no batteries
needed.
Thermostat, P/N 50218
Digital, non-programmable thermostat. One stage cool/One stage heat. Manual or auto
changeover. Fan mode: Auto or On. Permanent retention of settings upon power loss. Field
adjustable temperature calibration. Max heat and minimum cool set points. Adjustable temperature
differential. Remote sensor capable. Keypad lock out. Status LED. °F or °C selectable.
Thermostat, P/N 50246
Non-programmable, single stage heat, single stage cool. Manual changeover. Fan: Auto & On. 60
minute power back-up.
Thermostat, P/N 50289
Programmable 2-stage heat, 2-stage cool. System settings: Heat, Cool, Off, Auto-changeover. Fan
Auto & ON. 3-hour override and button lockout to prevent tampering.
Thermostat Guard, P/N 50092
For use with 50121, 50123 thermostats.
Digital humidity controller. P/N 50254
To be used with units with Hot Gas or Electric reheat. Programmable dehumidistat, humidistat
and ventilation control. Time of day can be set for dehumidifier, humidifier or ventilation to run.
Auto-changeover for humidification or dehumidification. Permanent memory retention of set
points. Humidity sensor can be field calibrated. High & low dehumidification set points. Outdoor
temperature and humidity sensor included. ºF or ºC selectable.
Choice of Colors
Beige is standard color with grey, white and light brown available.
3
ModPac PDS 7/2012 Rev. 9
Outside Air for Ventilation
ASHRAE standard 62 requires 30 cfm of outside air per occupant of a classroom. To meet this
requirement, Marvair offers a variety of ventilation packages for every budget and requirement.
Note: if an air conditioner with an energy recovery ventilator (ERV) is desired, please see the
GreenPac Product Data Sheet. If an air conditioner with an economizer is desired, please see the
ComPac Product Data Sheet.
Outside Air Ventilation Schedule
Ventilation
Package
Designator*
Description
Outside Air
Capability
Pressure
Relief
Models
B
Motorized, two position damper (open
and closed) includes pressure relief.
A 24-volt actuated motor controls the
damper from an external input such
as a time clock, CO2 sensor, energy
management system or a manual switch
Up to 450 cfm, but not
to exceed 40% of the
rated air flow of the air
conditioner.
Yes
AVPA30-60
Yes
AVPA30-60
No
AVPA30-60
No
All Models
Z
Manual damper, field adjustable
Y
Manual damper, field adjustable.
N
Manual, fixed position damper
Up to 450 cfm, but not
to exceed 40% of the
rated air flow of the air
conditioner.
Up to 450 cfm, but not
to exceed 40% of the
rated air flow of the air
conditioner
0-15% of rated air flow
*See Model Identification Chart
Model Identification
AVP A
A = R410
Refrigerant
•
AC •
• • •
M5
• •
Nominal Cooling
Power Supply
Configuration
12
20
24
30
36
42
48
60
A =208/230V,1ø,60Hz
M5 =PC Board &
Square Cornered
Cabinet
= 12,000
= 20,000
= 24,000
= 29,000
= 35,000
= 42,000
= 46,500
= 56,000
BTUH
BTUH
BTUH
BTUH
BTUH
BTUH
BTUH
BTUH
C =208/230V,3ø,60Hz
D =460V,3ø,60Hz
Special Option Code
U = Scroll Compressor
A1= PC Board
K = Coastal Environmental
Package
Color Code
Ventilation Code
N = 0-15% fresh air with manual
damper, no pressure relief)
All Models
Air Source
Vertical Package
System Type
Air Conditioner
•••
Electric Heat – kW
000 = No Heat
080
036 = 3.6 kW
090
040 = 4 kW
100
050 = 5 kW
120
060 = 6 kW
150
=
=
=
=
=
8 kW
9 kW
10 kW
12 kW
15 kW
100
200
300
400
= Beige (std)
= Grey
= Brown
= White
B = Motorized two position damper
(open & closed) capable of
0 to 450 cfm (up to 40% of
rated air flow) of outside air,
includes pressure relief) Models
AVPA30-60 only
Z = Manual damper, field adjustable
with pressure relief
Y = Manual damper, field adjustable,
no pressure relief
Dehumidification
Two dehumidification configurations – Hot Gas Reheat and Electric Reheat - are available. Both
Hot gas Reheat and Electric Reheat require a humidity controller in addition to a thermostat for
proper operation.
Hot Gas Reheat
Marvair® air conditioners equipped with Hot Gas Reheat (HGR) allow the indoor humidity of the
controlled environment to be maintained at or below a certain humidity set point. These units do
not have the ability to add humidity to the classroom. Dehumidification is achieved by operating
mechanical cooling in conjunction with a hot gas reheat coil.
ModPac PDS 7/2012 Rev. 9
4
Operation - If the humidity rises above the set point on the humidity controller and the
temperature in the classroom is satisfied, both mechanical cooling and the HGR coil operate to
temper the air and lower the humidity. If the temperature in the classroom rises above (or falls
below) the set point of the thermostat and the unit is operating in the dehumidification mode, the
call for cooling (or heating) will override the call for dehumidification and the coil is disengaged until
the thermostat is satisfied. This assures the environment temperature is maintained as first priority
and humidity control is second.
Electric Reheat
Allows the electric heat to operate simultaneously with cooling. See Dehumidification Application
Bulletin for details. Note: The electrical characteristics and requirements of air conditioners with
the dehumidification option are different from standard air conditioners. Refer to the appropriate
Summary Rating Charts for the electrical characteristics of units with Electric Reheat.
Accessories
• Phase Monitor - Monitors 3Ø power supply and will turn the air conditioner off if power supply is not phased properly. Not required on 1Ø units.
• Thermal Expansion Valve - Available on all ModPac air conditioners. Improves operation in high ambient temperatures, >110°F (43°C).
• Compressor sound jackets - Reduces sound of compressor
• Dirty Filter Indicator – Measures the pressure across the internal filter and illuminates a LED when the pressure exceeds the specified difference. Not available on the AVPA12.
•
Security Cages – Deters theft of the air conditioner and components. Constructed of 1” by 11
gauge square tube and ¾”, #9 expanded metal. Hinges and latches are constructed from steel
plate. The complete cage is powdered coated for longevity and to match the color of the air
conditioners cabinet. Field installed. Color is designated by the xxx suffix. See Model ID for color
code.
Model
Part Number
AVPA12
01633-xxx
AVPA20/24
01634-xxx
AVPA30/36
01649-xxx
AVPA42/48/60
01669-xxx
• Low ambient cooling (field installed) – Allows the ModPac unit to operate in the cooling mode
down to 20°F (-7°C).
• Wall mount adapter for the AVPA24 – To be used when upgrading from the old AVP24 or
AVPA24 cabinet with the chamfered corners to the new AVPA24 M5 cabinet. p/n K/03955
Special Application Packages and Coil Coatings
Coastal Environmental Package - Recommended for units to be installed near an ocean. Includes
corrosion resistant fasteners, sealed or partially sealed condenser fan motor, protective coating
applied to all exposed internal copper and metal in the condenser section and a protective coating
on the condenser coil. See Coastal Environmental Technical Bulletin for more details.
Protective Coil Coatings - Either the condenser or evaporator coil can be coated; however, coating
of the evaporator coil is not common. For harsh conditions, e.g., power plants, paper mills or
sites were the unit will be exposed to salt water; the coil should be coated with an impregnated
polyurethane coating. The coatings are sprayed on and pass 3,000 hours of B117 salt fog test.
Note: Cooling capacity may be reduced by up to 5% on units with coated coils.
5
ModPac PDS 7/2012 Rev. 9
Certified Efficiency and Capacity Ratings at ANSI/AHRI
Standard 390 - AVPA Air Conditioners
AVPA12 AVPA20
Model Number
Cooling BTUH1
AVPA24
AVPA30
AVPA36
AVPA42
AVPA48
AVPA60
ACA
ACA
10,800
19,600
24,000
29,000
35,000
42,000
46,000
54,500
9.00
9.00
9.25
9.25
9.25
9.25
9.50
9.25
400
735
840
1,000
1,220
1,575
1,760
1,850
EER2
3
Rated Air Flow (CFM )
ACA ACC ACD ACA ACC ACD ACA ACC ACD ACA ACC ACD ACA ACC ACD ACA ACC ACD
1
Cooling rated at 95°F (35°C) outdoor and 80°F DB/67° WB (26.5°C DB/19.5°C WB) return air.
2
3
EER=Energy Efficiency Ratio
CFM=Cubic Feet per Minute
Ratings are with no outside air. Performance will be affected by altitude.
Ratings are at 230 volts for 208/230 volt units (“A” & “C” models) and 460 volts for “D” models. Operation of units at a different voltage from that of the rating
point will affect performance and air flow.
Sensible Total Heat Ratio @ 95ºF (35ºC)
Outside Air Dry Bulb - AVPA Air Conditioners
AVPA12 AVPA20
Model Number
Total Capacity
ACA
ACA
AVPA24
AVPA30
AVPA36
AVPA42
AVPA48
AVPA60
ACA ACC ACD ACA ACC ACD ACA ACC ACD ACA ACC ACD ACA ACC ACD ACA ACC ACD
10,800
19,600
24,000
29,000
35,000
42,000
46,000
54,500
Sensible Heat Ratio
0.74
0.76
0.71
0.75
0.69
0.75
0.76
0.72
Sensible Capacity
7,982
14,837
16,950
21,740
24,155
31,640
34,940
39,000
400
735
840
1,000
1,220
1,575
1,760
1,850
Rated Air Flow (CFM1)
1
CFM=Cubic Feet per Minute. Sensible heat ratios based upon ANSI/AHRI std. 390 outdoor air conditions of 95°F (35°C) and 80°F DB/67° WB (26.5°C
DB/19.5°C WB) return air.
Cooling Performance (BTUH) at Various Outdoor Temperatures AVPA Air Conditioners
Outdoor Temperature
Model Number
75ºF /
24ºC
80ºF /
26.5ºC
85ºF /
29ºC
90ºF /
32ºC
95ºF /
35ºC
100ºF /
38ºC
105ºF /
40.5ºC
110ºF /
43.3ºC
AVPA12AC
12,530
12,100
11,660
11,230
10,800
10,370
9,940
9,500
9,290
AVPA20AC
22,740
21,950
21,170
20,380
19,600
18,820
18,030
17,250
16,860
AVPA24AC
27,840
26,880
25,920
24,960
24,000
23,040
22,080
21,120
20,640
AVPA30AC
33,640
32,480
31,320
30,160
29,000
27,840
26,680
25,520
24,940
AVPA36AC
40,600
39,200
37,800
36,400
35,000
33,600
32,200
30,800
30,100
AVPA42AC
48,720
47,040
45,360
43,680
42,000
40,320
38,640
36,960
36,120
AVPA48AC
53,360
51,520
49,680
47,840
46,000
44,160
42,320
40,480
39,560
AVPA60AC
63,220
61,040
58,860
56,680
54,500
52,320
50,140
47,960
46,870
Based upon ANSI/AHRI std. 390 return air conditions of 80°F DB/67° WB (26.5°C DB/19.5°C WB) at various outdoor temperatures.
CFM1 vs. External Static Pressure (Wet Coil) AVPA Air Conditioners
0.10
0.20
0.25
0.3
0.4
0.5
AVPA12
MODEL
500
460
430
400
n/a
n/a
AVPA20
860
810
740
670
n/a
n/a
AVPA24
860
810
740
670
n/a
n/a
AVPA30
1,100
1,000
960
920
810
n/a
AVPA36
1,310
1,220
1,185
1,150
1,060
n/a
AVPA42
n/a
1,650
1,585
1,520
1,450
1,360
AVPA48
n/a
1,900
1,830
1,760
1,700
1,620
AVPA60
n/a
1,900
1,830
1,760
1,700
1,620
1
CFM=Cubic Feet per Minute. Air flow ratings are at 230 volts. Operation of units at a different voltage will affect air flow.
ModPac PDS 7/2012 Rev. 9
6
115ºF /
46ºC
Electrical Characteristics - Compressor, Fan & Blower Motors AVPA Air Conditioner
COMPRESSOR
OUTDOOR FAN MOTOR
INDOOR FAN MOTOR
BASIC
MODEL
Type
VOLTS-HZ-PH
RLA1
LRA2
VOLTS-HZ-PH
RPM3
FLA4
HP5
VOLTS-HZ-PH
RPM3
FLA4
AVPA12ACA
ROTARY
208/230-60-1
4.7
25.0
208/230-60-1
1630
0.65
1/6
208/230-60-1
1650
0.85
1/5
208/230-60-1
8.3
43.0
208/230-60-1
1075
1.5
1/5
208/230-60-1
1075
1.5
1/5
AVPA20ACA
HP5
AVPA24ACA
208/230-60-1
10.6
54.0
208/230-60-1
1075
1.5
1/5
208/230-60-1
1075
1.5
1/5
AVPA30ACA
208/230-60-1
13.1
74.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
AVPA36ACA
RECIPROCATING
AVPA42ACA
208/230-60-1
14.7
84.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
208/230-60-1
15.7
84.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA48ACA
208/230-60-1
18.6
102.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA60ACA
208/230-60-1
23.0
130.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
5.2
3/4
AVPA24ACA
208/230-60-1
12.8
64.0
208/230-60-1
1075
1.5
1/5
208/230-60-1
1075
1.5
1/5
AVPA30ACA
208/230-60-1
14.1
77.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
AVPA36ACA
AVPA42ACA
SCROLL
208/230-60-1
17.9
112.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
208/230-60-1
19.8
109.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA48ACA
208/230-60-1
21.8
117.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA60ACA
208/230-60-1
26.2
134.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
5.2
3/4
AVPA24ACC
208/230-60-3
8.3
61.0
208/230-60-1
1075
1.5
1/5
208/230-60-1
1075
1.5
1/5
AVPA30ACC
208/230-60-3
9.0
71.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
AVPA36ACC
AVPA42ACC
SCROLL
208/230-60-3
13.2
88.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
208/230-60-3
13.6
83.1
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA48ACC
208/230-60-3
13.7
83.1
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA60ACC
208/230-60-3
15.6
111.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
5.2
3/4
AVPA24ACD
460-60-3
5.1
28.0
208/230-60-1
1075
1.5
1/5
208/230-60-1
1075
1.5
1/5
AVPA30ACD
460-60-3
5.6
38.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
AVPA36ACD
AVPA42ACD
SCROLL
460-60-3
6.0
44.0
208/230-60-1
1075
1.8
1/4
208/230-60-1
1075
2.5
1/4
460-60-3
6.1
41.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA48ACD
460-60-3
6.2
41.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
3.1
1/2
AVPA60ACD
460-60-3
7.7
52.0
208/230-60-1
825
2.8
1/3
208/230-60-1
1075
5.2
3/4
1
2
3
RLA = Rated Load Amps
LRA = Locked Rotor Amps
RPM = Revolutions per Minute
The 460 volt units have a step down transformer for the 230 volt motors.
4
FLA = Full Load Amps
5
HP = Horsepower
Summary Electrical Ratings (Wire and Circuit Breaker Sizing)
AVPA Air Conditioners with Ventilation Configurations:
Manual Damper, up to
Motorized Damper, up
Manual Damper, up to
Manual Damper, up to
ELECTRIC HEAT
000 = None
3
15% Outside Air (“N”)
to 450 CFM of Outside Air with Pressure Relief (“B”)
450 CFM of Outside Air (“Y”)
450 CFM of Outside Air with Pressure Relief (“Z”)
036 = 3.6 kw
3
040 = 4 kw
050 = 5 kw
3
3
060 = 6 kw
3
080 = 8 kw
3
090 = 9 kw
3
100 = 10 kw
3
120 = 12 kw
3
150 = 15 kw
3
SPPE
SPPE
SPPE
SPPE
SPPE
SPPE
SPPE
SPPE
SPPE
SPPE
BASIC
VOLTAGE
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
MCA MFS MCA MFS MCA MFS MCA MFS MCA MFS MCA MFS MCA MFS MCA MFS MCA MFS MCA MFS
MODEL
PHASE / HZ
AVPA12ACA
208/230-1-60
7.4
15 19.7 20
26.9 30
AVPA20ACA
208/230-1-60
13.4 20
22.4 25 27.5 30 32.8 35 43.1 45
53.6 60
AVPA24ACA
208/230-1-60
19.0 30
22.4 30 27.5 30 32.8 35 43.1 45
53.6 60
AVPA30ACA
208/230-1-60
21.9 35
23.4 35 28.5 35 33.8 35 44.1 45
54.6 60 65.0 70 80.6 90
AVPA36ACA
208/230-1-60
26.7 40
26.7 40 28.5 40 33.8 40 44.1 45
54.6 60 65.0 70 80.6 90
AVPA42ACA
208/230-1-60
30.7 50
30.7 50
55.1 60 65.5 70 81.1 90
AVPA48ACA
208/230-1-60
33.2 50
33.2 50
55.1 60 65.5 70 81.1 90
AVPA60ACA
208/230-1-60
40.8 60
40.8 60
57.3 60 67.6 70 83.2 90
AVPA24ACC
208/230-3-60
13.4 20
19.5 20
28.6 30
37.6 40
AVPA30ACC
208/230-3-60
15.6 20
20.5 20
29.6 30
38.6 40 47.6 50
AVPA36ACC
208/230-3-60
20.8 30
20.8 30
29.6 30
38.6 40 47.6 50
AVPA42ACC
208/230-3-60
22.9 35
22.9 35
30.1 35
39.1 40 48.1 50
AVPA48ACC
208/230-3-60
23.0 35
23.0 35
30.1 35
39.1 40 48.1 50
AVPA60ACC
208/230-3-60
27.5 40
27.5 40
32.2 40
41.3 50 50.2 60
AVPA24ACD
460-3-60
7.9
15
9.8
15
14.3 15
18.8 20 23.3 25
AVPA30ACD
460-3-60
9.2
15
10.3 15
14.8 15
19.3 20 23.8 25
AVPA36ACD
460-3-60
9.7
15
10.3 15
14.8 15
19.3 20 23.8 25
AVPA42ACD
460-3-60
10.6 15
10.9 15
15.1 20
19.6 20 24.1 25
AVPA48ACD
460-3-60
10.7 15
10.9 15
15.1 20
19.6 20 24.1 25
AVPA60ACD
460-3-60
13.6 20
13.6 20
16.1 20
20.6 25 25.1 30
1MCA = Minimum Circuit Ampacity (Wiring Size Amps)
2MFS = Maximum Fuse Size
3SPPE = Single Point Power Entry
MCA & MFS are calculated at 230 volts on the ACA & ACC models. The 460 volts ACD models are calculated at 460 volts. This chart should only be used as a
guideline for estimating conductor size and overcurrent protection. For the requirements of specific units, always refer to the data label on the unit.
7
ModPac PDS 7/2012 Rev. 9
Summary Electrical Ratings (Wire and Circuit Breaker Sizing)
AVPA Air Conditioners with Electric Reheat (“R”) and Ventilation Configurations:
Manual Damper, up to 15% Outside Air (“N”)
Motorized Damper, up to 450 CFM of Outside Air with Pressure Relief (“B”)
Manual Damper, up to 450 CFM of Outside Air (“Y”)
Manual Damper, up to 450 CFM of Outside Air with Pressure Relief (“Z”)
ELECTRIC HEAT
BASIC
MODEL
VOLTAGE
PHASE / HZ
000 = None
036 = 3.6 kw
3
3
SPPE
MCA
1
2
MFS
MCA
1
040 = 4 kw
050 = 5 kw
3
SPPE
2
MFS
MCA
1
060 = 6 kw
3
SPPE
2
MFS
MCA
1
080 = 8 kw
3
SPPE
2
MFS
MCA
1
090 = 9 kw
3
SPPE
2
MFS
MCA
1
100 = 10 kw
3
SPPE
3
SPPE
2
MFS
MCA
1
2
MFS
MCA
1
120 = 12 kw
150 = 15 kw
3
SPPE
3
SPPE
2
MFS
MCA
1
SPPE
2
MFS
MCA
1
2
MFS
AVPA12ACA
208/230-1-60
7.4
15 26.2 30
33.4 35
AVPA20ACA
208/230-1-60
13.4 20
34.3 35 39.4 40 44.7 45
65.5 70
AVPA24ACA
208/230-1-60
19.0 30
39.9 40 45.0 45 50.3 60
71.1 80
AVPA30ACA
208/230-1-60
21.9 35
42.8 45 47.9 50 53.2 60
74.0 80 84.8 90 100.0 100
AVPA36ACA
208/230-1-60
26.7 40
47.6 50 52.7 60 58.0 60
78.8 80 89.2 90 104.8 110
AVPA42ACA
208/230-1-60
30.7 50
56.7 60
82.8 90 93.2 100 108.8 110
AVPA48ACA
208/230-1-60
33.2 50
59.2 60
85.3 90 95.7 100 111.3 120
AVPA60ACA
208/230-1-60
40.8 60
66.8 70
92.9 100 103.3 110 118.9 120
AVPA24ACC
208/230-3-60
13.4 20
31.4 35
40.5 45
49.5 50 58.5 60
AVPA30ACC
208/230-3-60
15.6 20
33.6 35
42.7 45
51.7 60 60.7 70
AVPA36ACC
208/230-3-60
20.8 30
38.8 40
47.9 50
56.9 60 65.9 70
AVPA42ACC
208/230-3-60
22.9 35
40.9 45
50.0 50
59.0 60 68.0 70
AVPA48ACC
208/230-3-60
23.0 35
41.0 45
50.1 60
59.1 60 68.1 70
AVPA60ACC
208/230-3-60
27.5 40
45.5 50
54.6 60
63.6 70 72.6 80
AVPA24ACD
460-3-60
7.9
15
16.0 20
21.4 25
25.9 30 30.4 35
AVPA30ACD
460-3-60
9.2
15
18.2 20
22.7 25
27.2 30 31.7 35
AVPA36ACD
460-3-60
9.7
15
18.7 20
23.2 25
27.7 30 32.2 35
AVPA42ACD
460-3-60
10.6 15
19.6 20
24.1 25
28.6 30 33.1 35
AVPA48ACD
460-3-60
10.7 15
19.7 20
24.2 25
28.7 30 33.2 35
AVPA60ACD
460-3-60
13.6 20
22.6 25
27.1 30
31.6 35 36.1 40
1MCA = Minimum Circuit Ampacity (Wiring Size Amps)
2MFS = Maximum Fuse Size
3SPPE = Single Point Power Entry
MCA & MFS are calculated at 230 volts on the ACA & ACC models. The 460 volts ACD models are calculated at 460 volts. This chart should only be used as a
guideline for estimating conductor size and overcurrent protection. For the requirements of specific units, always refer to the data label on the unit.
Unit Load Amps - AVPA Air Conditioners with Ventilation Configurations:
Manual Damper, up to
Motorized Damper, up
Manual Damper, up to
Manual Damper, up to
BASIC
MODEL
NUMBER
VOLTAGE
PHASE / HZ
CURRENT
AMPS
15% Outside Air (“N”)
to 450 CFM of Outside Air with Pressure Relief (“B”)
450 CFM of Outside Air (“Y”)
450 CFM of Outside Air with Pressure Relief (“Z”)
LOAD OF RESISTIVE HEATING - ELEMENTS ONLY (AMPS)
(1) ALL HEATING ELEMENTS ARE ON A SEPARATE CIRCUIT
(2) SHADED VALUES (12 & 15 kW) UTILIZE TWO CIRCUITS
TOTAL MAXIMUM HEATING AMPS
INCLUDES AMPS FROM MOTOR(S) THAT ARE LOCATED
ON AN
ELECTRICAL CIRCUIT THAT DOES NOT HAVE HEATERS
3.6
3.6 04
05
06
08
09
10
12
15
04 kW 05 kW 06 kW 08 kW 09 kW 10 kW 12 kW 15 kW
kW
Kw Kw Kw Kw Kw Kw Kw Kw Kw
AVPA12ACA 208/230-1-60 6.1 0.85 15.0
20.8
15.9
21.7
AVPA20ACA 208/230-1-60 11.3 1.5
16.7 20.8 25.0 33.3
41.7
18.2 22.3 26.5 34.8
43.2
AVPA24ACA 208/230-1-60 15.8 1.5
16.7 20.8 25.0 33.3
41.7
18.2 22.3 26.5 34.8
43.2
AVPA30ACA 208/230-1-60 18.4 2.5
16.7 20.8 25.0 33.3
41.7 50.0 62.5
19.2 23.3 27.5 35.8
44.2 52.5 65.0
AVPA36ACA 208/230-1-60 22.2 2.5
16.7 20.8 25.0 33.3
41.7 50.0 62.5
19.2 23.3 27.5 35.8
44.2 52.5 65.0
AVPA42ACA 208/230-1-60 25.7 3.1
20.8
41.7 50.0 62.5
23.9
44.8 53.1 65.6
AVPA48ACA 208/230-1-60 27.7 3.1
20.8
41.7 50.0 62.5
23.9
44.8 53.1 65.6
AVPA60ACA 208/230-1-60 34.2 5.2
20.8
41.7 50.0 62.5
26.0
46.9 55.2 67.7
AVPA24ACC 208/230-3-60 11.2 1.5
14.4
21.7
28.9 36.1
15.9
23.2
30.4 37.6
AVPA30ACC 208/230-3-60 13.3 2.5
14.4
21.7
28.9 36.1
16.9
24.2
31.4 38.6
AVPA36ACC 208/230-3-60 17.5 2.5
14.4
21.7
28.9 36.1
16.9
24.2
31.4 38.6
AVPA42ACC 208/230-3-60 19.5 3.1
14.4
21.7
28.9 36.1
17.5
24.8
32.0 39.2
AVPA48ACC 208/230-3-60 19.6 3.1
14.4
21.7
28.9 36.1
17.5
24.8
32.0 39.2
AVPA60ACC 208/230-3-60 23.6 5.2
14.4
21.7
28.9 36.1
19.6
26.9
34.1 41.3
AVPA24ACD
460-3-60
6.6 0.8
7.2
10.8
14.4 18.0
8.0
11.6
15.2 18.8
AVPA30ACD
460-3-60
7.8 1.3
7.2
10.8
14.4 18.0
8.5
12.1
15.7 19.3
AVPA36ACD
460-3-60
8.2 1.3
7.2
10.8
14.4 18.0
8.5
12.1
15.7 19.3
AVPA42ACD
460-3-60
9.1 1.6
7.2
10.8
14.4 18.0
8.8
12.4
16.0 19.6
AVPA48ACD
460-3-60
9.2 1.6
7.2
10.8
14.4 18.0
8.8
12.4
16.0 19.6
AVPA60ACD
460-3-60
11.7 2.6
7.2
10.8
14.4 18.0
9.8
13.4
17.0 20.6
1AC = Air conditioner
2IBM= Indoor Blower Motor
Heating kW is rated at 240 volts on the ACA & ACC models.
Derate heater output by 25% for operation at 208 volts.
Heating kW is rated at 480 volts on the ACD models.
Total heating and cooling amps includes all motors.
Three phase models contain single phase motor loads.
Loads are not equally balanced on each phase and values shown are maximum phase loads.
AC1
ModPac PDS 7/2012 Rev. 9
IBM2
8
9
Return Air Filter
Filter Size
20 x 10 x 1
INCHES
508 x 254x 25
91913
PART NUMBER
82
180
MILLIMETERS
Kg
Lbs
Ship Weight
1
FILTERS PER UNIT
7
MERV RATING
Dimensional Data – AVPA12 ModPac™ II
Air Conditioner (M5 Configuration)
ModPac PDS 7/2012 Rev. 9
ModPac PDS 7/2012 Rev. 9
10
127
280
Return Air Filter
Filter Size
Kg
Lbs
INCHES
25 x 16 x 1
Ship Weight
MILLIMETERS
635 x 406 x 25
80135
PART NUMBER
1
FILTERS PER UNIT
7
MERV RATING
Dimensional Data – AVPA20-24 ModPac™ II
Air Conditioner (M5 Configuration)
11
Lbs
350
365
VENTILATION CONFIGURATION
N
B, Y & Z
Ship Weight
166
159
Kg
Return Air Filter
Filter Size
30 x 16 x 1
INCHES
762 x 406 x 25
MILLIMETERS
80136
PART NUMBER
1
FILTERS PER UNIT
7
MERV RATING
Dimensional Data – AVPA30-36 ModPac™ II Air Conditioner
ModPac PDS 7/2012 Rev. 9
1 21
[38]
P.O. Box 400 • Cordele, GA 31010
156 Seedling Drive • Cordele, GA 31015
Ph: 229-273-3636 • Fax: 229-273-5154
Email: marvair@airxcel.com • Internet: www.marvair.com
ModPac PDS 7/2012 Rev. 9
12
RH SIDE VIEW
11
22 16
[577]
AIR
INLET
86
[2184]
Return Air Filter
36½ x 22 x 1
INCHES
565
Filter Size
239
525
N
B, Y & Z
19 43
[502]
927 x 559 x 25
MILLIMETERS
257
Kg
4 43
[120]
18
[457]
18
[457]
18
[457]
18
[457]
6
[152]
3/8" SQ
10 PLACES
19 43
[502]
9
40 16
[1030]
80139
3
116
[30]
1
3°
1 81
[28]
FILTERS PER UNIT
15
8
[41]
37
8
[98]
RH SIDE VIEW
AIR
INLET
5
116
[33]
3/4" X 1"
ELECTRICAL
K.O.'S
HEATER
ACCESS
COVER
COMPRESSOR
ACCESS
9
38 16
[979]
PART NUMBER
41 21
[1054]
5
83 16
[2116]
.375Ø (6 PLC'S)
AVPA42-60
BOTTOM MOUNTING BRACKET
Lbs
7
116
[37]
42
[1067]
AIR
OUTLET
FRESH AIR
SLOTS
BREAKER
ACCESS
COVER
FRONT VIEW
VENTILATION CONFIGURATION
Ship Weight
84 21
[2146]
3/4" X 1"
ELECTRICAL
K.O.'S
C. TO C. MOUNTING HOLES
43 21
[1105]
DIMENSIONS
AVPA42-60 ModPac II Air Conditioner
3
30 8
[772]
2 43
[71]
7
MERV RATING
CONDENSATE
DRAIN, 3/4"
32 3
8
[822]
BACK VIEW
RETURN AIR
OPENING
30 X 16
BOTH SIDES
ELECTRICAL K.O.'S
3/4" X 1"
SUPPLY AIR
OPENING
30 X 10
45
[1143]
29 7
8
[759]
2 43
[71]
11
26 16
[678]
15 43
[400]
30
[762]
97
8
[251]
2 1/8
[55]
Dimensional Data – AVPA42-60 ModPac™ II Air Conditioner
Please consult the Marvair® website at www.marvair.com for the latest product literature. Detailed dimensional data
is available upon request. A complete warranty statement can be found in each product’s Installation/Operation
Manual, on our website or by contacting Marvair at 229-273-3636. As part of the Marvair continuous improvement
program, specifications are subject to change without notice.