Auto Page RF-520LCD Instruction manual

s0018_e_oime_00_1_cover_7.fm Page 1 Monday, March 24, 2008 2:42 PM
DIGITAL CAMERA
Basic guide
INSTRUCTION MANUAL
Printed in China
INSTRUCTION
MANUAL
P. 2
Review the camera part names
and the basic steps for shooting
and playback.
Table of Contents P. 20
z Before you start to use your new camera, please read the “Safety Precautions”
section in this manual.
z We recommend that you take test shots to get accustomed to your camera before
taking important photographs.
z The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
z The contents in this manual are based on firmware version 1.0 for this camera. If there
are addition and/or modification of functions due to firmware update for the camera,
the contents will differ. For the latest information, please visit the Olympus website.
s0018_e_00_0_unified.book Page 2 Tuesday, March 18, 2008 4:08 PM
Camera
Mode dial
gP. 4
Built-in flash
gP. 73
Power switch
gP. 14
Hot shoe gP. 75
Control dial
(j) gP. 19, 26
# (flash) button
gP. 73
F (Exposure
compensation) button
gP. 48
j/Y/<
(Sequential shooting/
Self-timer/Remote control)
button gP. 57-60, 92
COPY/< (Copy/Print) button
gP. 86, 102
Shutter button
gP. 16, 31
Strap eyelet
gP. 10
Strap eyelet
gP. 10
Self-timer/Remote control lamp/
Remote control receiver
gP. 58
Lens attachment mark
gP. 12
Mount
(Attach the lens after removing the body cap
from the camera to prevent dust and dirt
from entering the camera body.)
2
EN
Lens release button
gP. 12
Lens lock pin
Mirror gP. 37
s0018_e_00_0_unified.book Page 3 Tuesday, March 18, 2008 4:08 PM
Viewfinder gP. 6
AEL/AFL button
gP. 37, 49, 90
0 (Protect) button
gP. 87
LCD monitor
gP. 8, 9, 36
q (Playback) button
gP. 79
Basic guide
Diopter adjustment
dial gP. 14
Eyecup gP. 58
o (Image stabilizer)
button gP. 60
S (Erase) button
gP. 88
< button gP. 91
P (AF target)
button gP. 54
MENU button
gP. 29
u (Live view)
button gP. 36
INFO
(Information
display) button
gP. 28, 40, 79
Arrow pad
gP. 27, 29
i button gP. 29
Tripod socket
Battery compartment lock
gP. 11
Card cover gP. 13
Card access lamp
gP. 13, 16, 108
CF card slot gP. 13
xD-Picture Card slot
gP. 13
Connector cover
Multi-connector
gP. 84, 103, 107
Names of parts and functions
Battery
compartment cover
gP. 11
Eject button
gP. 13
3
EN
s0018_e_00_0_unified.book Page 4 Tuesday, March 18, 2008 4:08 PM
Mode dial
The mode dial allows you to change the
camera settings easily according to the
subject.
Easy shooting modes
• Select according to the shooting scene. The camera sets the appropriate shooting conditions
automatically.
• When rotating the mode dial or turning off the power in the easy shooting modes, functions
with changes made to their settings are restored to the factory default settings.
AUTO
4
Allows you to shoot using an optimum aperture and shutter
speed that the camera sets. The built-in flash pops up
automatically in low-light conditions.
i
PORTRAIT
l
LANDSCAPE
&
MACRO
Suitable for taking close-up pictures.
j
SPORT
Suitable for capturing fast-moving action without blurring.
/
NIGHT+PORTRAIT
Suitable for shooting both the main subject and background
at night.
Scene mode
When you select a mode to suit the shooting situation, the
camera optimizes the settings for the shooting conditions.
Unlike the mode dial’s scene mode, most functions cannot be
changed.
1 Set the mode dial to g.
1 PORTRAIT
• The scene menu is
For taking a
displayed.
portrait-style
2 Use ac to select the scene
shot.
mode.
• The sample image followed
by a description of the
SELECT
GO
selected mode is displayed.
3 Press the i button.
• The camera enters the shooting stand-by mode.
• To change the setting, press the i button again. The
scene menu is displayed.
g
EN
AUTO
Suitable for shooting a portrait-style image of a person.
Suitable for shooting landscapes and other outdoor scenes.
s0018_e_00_0_unified.book Page 5 Tuesday, March 18, 2008 4:08 PM
Icon
I
Mode
1
Icon
PORTRAIT
J
Mode
11
MACRO
NATURE MACRO
L
2
LANDSCAPE
r
12
K
3
LANDSCAPE+PORTRAIT
&
13
CANDLE
G
4
NIGHT SCENE
*
14
SUNSET
FIREWORKS
U
5
NIGHT+PORTRAIT
(
15
G
6
CHILDREN
@
16
DOCUMENTS
J
7
SPORT
s
17
PANORAMA
H
8
HIGH KEY
g
18
BEACH & SNOW
I
9
LOW KEY
I
19
UNDERWATER WIDE
q
10
DIS MODE
H
20
UNDERWATER MACRO
Basic guide
Types of scene modes
Advanced shooting modes
P
Program shooting
Allows you to shoot using an aperture and shutter speed
that the camera sets. (gP. 43)
A
Aperture priority shooting
Allows you to set the aperture manually. The camera sets
the shutter speed automatically. (gP. 44)
S
Shutter priority shooting
Allows you to set the shutter speed manually. The camera
sets the aperture automatically. (gP. 44)
M
Manual shooting
Allows you to set the aperture and shutter speed manually.
(gP. 45)
Names of parts and functions
• For more advanced shooting and greater creative control, you can set the aperture value and
shutter speed.
• The settings made in the advanced shooting modes are retained even if the camera is turned
off.
5
EN
s0018_e_00_0_unified.book Page 6 Tuesday, March 18, 2008 4:08 PM
Viewfinder
AF target gP. 54
Image stabilizer
gP. 60
Aperture value
gP. 43-46
AF confirmation mark
gP. 16, 43 , 56
White balance
(Displayed when set to a
setting other than auto
white balance.)
gP. 64
Exposure compensation
value gP. 48
Metering mode
gP. 47
Shooting mode
gP. 4
6
EN
Shutter speed
gP. 43-46
Flash
gP. 70
(blinks: charging in progress,
lights up: charging completed)
AE lock
gP. 49
Battery check
(ready for use)
(charging required)
s0018_e_00_0_unified.book Page 7 Tuesday, March 18, 2008 4:08 PM
Super control panel
Shutter speed gP. 43-46
Flash charging
gP. 73
Exposure compensation indicator gP. 48
Exposure level indicator gP. 45
Flash intensity control indicator gP. 74
Battery check gP. 6
Basic guide
The following screen allows the display and setting of shooting settings at the same time
and is called the super control panel. Press the INFO button to display the super control
panel on the LCD monitor. g“Using the super control panel” (P. 28)
Super FP flash 1 gP. 76
Noise reduction mO gP. 69
Auto bracket 0 gP. 50, 74
Arrow pad lock p gP. 92
RC mode m gP. 76
Image stabilizer HIt gP. 60
AF illuminator T gP. 89
Internal temperature warning m
gP. 118
Shooting mode
gP. 4
Date gP. 15
Aperture value
gP. 43-46
250
F5.6
+2.0
Picture mode
gP. 67
OFF
arge
Normal
Card
gP. 121
Record mode
gP. 62
AF mode gP. 52
AF target gP. 54
Flash intensity control gP. 74
Flash mode gP. 70
Remote control/Self-timer/Sequential shooting
gP. 57-60
ISO sensitivity gP. 51
White balance gP. 64
White balance compensation gP. 65
Color space
gP. 96
Face
detection
gP. 39
Number of storable
still pictures
gP. 128
Sharpness N gP. 67
Contrast J gP. 67
Saturation T gP. 67
Gradation z gP. 68
B&W filter x gP. 67
Picture tone y gP. 67
Names of parts and functions
FP
BKT
RC IS 2 AF
2008. 08.16
Exposure
compensation value
gP. 48
Exposure level
gP. 45
Metering mode gP. 47
The functions within this area can be set on
the super control panel.
7
EN
s0018_e_00_0_unified.book Page 8 Tuesday, March 18, 2008 4:08 PM
LCD monitor (Live view)
You can use the LCD monitor to view the subject while shooting. Press the u button to
use live view. g“Using live view” (P. 36)
Aperture value gP. 43-46
Metering mode
gP. 47
Shutter speed gP. 43-46
Flash mode
gP. 70
Home position p gP. 55
RC mode q gP. 76
Super FP flash s gP. 76
Auto bracket t gP. 50, 74
AE lock u gP. 49
Live view AF mode po gP. 37
Image stabilizer vws gP. 60
Flash gP. 73
(blinks: charging in progress,
lights up: charging
completed)
Exposure
compensation value
gP. 48
Shooting mode
gP. 4
AF confirmation mark
gP. 16, 38, 56
Battery check
gP. 6
250 F5.6 +2.0
HP RC FP BKT AEL H-AF IS 2
WB
AUTO
ISO
AUTO
LN
38
Histogram
gP. 116
AF target
gP. 54
Internal temperature warning
gP. 118
Face detection g
gP. 39
Flash intensity control
gP. 74
Number of storable
still pictures
gP. 128
Record mode
gP. 62
Card
gP. 121
ISO sensitivity
gP. 51
Sequential shooting
gP. 57
Self-timer gP. 58
Remote control gP. 58
White balance
gP. 64
8
EN
s0018_e_00_0_unified.book Page 9 Tuesday, March 18, 2008 4:08 PM
LCD monitor (Playback)
Record mode gP. 62
Focal length gP. 123
(The focal length is displayed in 1 mm
units.)
Battery check gP. 6
Shooting mode gP. 4
Card gP. 121
Aperture value gP. 43-46
Print reservation
Number of prints
gP. 100
Protect
gP. 87
LN
Basic guide
You can switch the monitor display using the INFO button.
g“Information display” (P. 82)
Shutter speed
gP. 43-46
Exposure
compensation
gP. 48
x10
[3648x2736,1/8]
File number
gP. 82
LN
15
Single-frame playback information
Frame number
gP. 82
Date and time
gP. 15
Shooting
information
Record mode
gP. 62
Color space
gP. 96
Picture mode
gP. 67
AF target gP. 54
Histogram gP. 82
White balance compensation
gP. 65
Metering mode gP. 47
Flash intensity control gP. 74
White balance gP. 64
ISO sensitivity gP. 51
Names of parts and functions
’08.08.16 21:56
100-0015
1/250 F5.6
+2.0 45mm
ISO 100
0.0
WB : AUTO A : 0
G: 0
NATURAL
sRGB
9
EN
s0018_e_00_0_unified.book Page 10 Tuesday, March 18, 2008 4:08 PM
Unpack the box contents
The following items are included with the camera.
If anything is missing or damaged, contact the dealer from whom you purchased the camera.
Camera
Body cap
BCM-2 Lithium ion
charger
Instruction manual
USB cable
Warranty card
Strap
BLM-1 Lithium ion
battery
Video cable
OLYMPUS Master 2
CD-ROM
Eyepiece cover
Attaching the strap
1
2
Thread the strap as
indicated by the
arrows (1, 2).
10
EN
3
Lastly, pull the strap tight
making sure that it is
fastened securely (3).
Attach the other end of
the strap to the other
eyelet in the same way.
s0018_e_00_0_unified.book Page 11 Tuesday, March 18, 2008 4:08 PM
Preparing the battery
Charging the battery
W
BLM-1 Lithium ion
battery
Charging indicator
Red light: Charging in progress
Green light: Charging completed
(Charging time: Approx. 5 hours)
Remove the
protection cap from
the battery.
Basic guide
1
BCM-2 Lithium
ion charger
AC cable
Align the battery with the
arrow.
Loading the battery
2
Battery
compartment lock
Direction
indicating mark
3
1
3
Close the battery compartment cover and slide the battery
compartment lock in the direction of E
Battery lock
Unloading the
battery
Preparations for shooting
Battery compartment
cover
W
2
AC wall outlet
Press the battery lock to
unlock the battery.
It is recommended to set aside a backup battery for prolonged shooting in case the battery
in use drains.
11
EN
s0018_e_00_0_unified.book Page 12 Tuesday, March 18, 2008 4:08 PM
Attaching a lens to the camera
1
Remove the body cap from the
camera and the rear cap from the lens
1
2
1
2
2
Rear cap
Body cap
Attach a lens to the camera
• Align the lens attachment mark
(red) on the camera with the
alignment mark (red) on the
lens, then insert the lens into
the camera’s body (1).
• Rotate the lens in the direction
indicated by the arrow until you
hear it click (2).
Lens attachment
mark (Red)
Alignment mark (Red)
2
• Make sure the power switch
is set to OFF.
• Do not press the lens release
button.
3
Remove the lens cap
(3, 4)
1
3
4
Lens cap
3
Removing the lens from the
camera
While pressing the lens release button
(1), rotate the lens in the direction of
the arrow (2).
2
1
Lens release button
12
EN
s0018_e_00_0_unified.book Page 13 Tuesday, March 18, 2008 4:08 PM
Loading the card
Open the card cover.
Insert the card’s contact area into the slot as
far as it can go.
xD-Picture Card
Open the card cover.
Insert the card until it is locked into place.
Basic guide
CompactFlash/Microdrive
Card cover
Card access lamp
CF card slot
W mark
CompactFlash/Microdrive
• Press the eject button all the way in to
make it pop out. Press the eject button
again all the way in to eject the card.
• Pull out the card.
Card access lamp
Never open the card cover while the card
access lamp is blinking.
xD-Picture Card
• Press the inserted card lightly and it will be
ejected.
• Pull out the card.
Preparations for shooting
Removing the card
xD-Picture Card slot
Eject button
13
EN
s0018_e_00_0_unified.book Page 14 Tuesday, March 18, 2008 4:08 PM
Power on
1
Set the camera’s power switch to ON.
• To turn off the power, set the power switch to OFF.
Power switch
Mode dial
Set the mode dial to
AUTO.
SSWF indicator
INFO button
LCD monitor
AUTO
2008. 08.16
AF
OFF
arge
Normal
When the camera is turned on,
the super control panel screen is
displayed on the monitor.
If the super control panel screen
does not appear, press the INFO
button.
Super control panel
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device’s filter surface. The
SSWF (Super Sonic Wave Filter) indicator blinks while dust reduction is working.
Adjusting the viewfinder’s
diopter
Adjust the viewfinder’s diopter in
accordance with your vision.
While looking through the viewfinder,
rotate the diopter adjustment dial little by
little.
When you can see the AF target clearly,
adjustment is complete.
14
EN
Viewfinder
AF target
Diopter adjustment dial
s0018_e_00_0_unified.book Page 15 Tuesday, March 18, 2008 4:08 PM
Setting the date/time
Basic guide
Date and time information is recorded on the card together with
the images. The file name is also included with the date and time
information. Be sure to set the correct date and time before using
the camera.
1
MENU button
Press the MENU button
• The menu screen is displayed on
the LCD monitor.
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL
SELECT
2
NORM
N
AUTO
Arrow pad
acbd
5
Repeat this procedure until
the date and time are
completely set
GO
Use ac to select [Z],
then press d
Y
M D
TIME
2008 08 01 14 00
Y/M/D
’--.--.---:--
CANCEL
SELECT
3
CF
j±0 k±0
ENG.
NTSC
6
Use ac to select the
date format
GO
Use ac to select
[X], then press d
GO
CANCEL
• The time is displayed in the 24-hour format.
Y
M D
TIME
2008 08 01 14 00
Y
M D
TIME
GO
CANCEL
Y/M/D
7
Y/M/D
Press the i button
CANCEL
4
Y
Use ac to select [Y],
then press d
M D
2008
CANCEL
TIME
’08.08.01
14:01
CF/xD
EDIT FILENAME
s
W
VIDEO OUT
CANCEL
Y/M/D
Preparations for shooting
CF/xD
EDIT FILENAME
s
W
VIDEO OUT
8
SELECT
CF
j±0 k±0
ENG.
NTSC
GO
Press the MENU button
to exit
15
EN
s0018_e_00_0_unified.book Page 16 Tuesday, March 18, 2008 4:08 PM
Shooting
1
Viewfinder
Place the AF target on the
subject while viewing
through the viewfinder
Shutter button
Card access
lamp
2
Adjust the focus
Press the shutter
button halfway.
Viewfinder
Super control panel
Aperture value
250
AUTO
Shutter speed
AF confirmation
mark
F5.6
2008. 08.16
AF
OFF
arge
Normal
AF target
• The focus is locked when a beep tone is output. The AF confirmation mark and the AF
target in focus light up in the viewfinder.
• The shutter speed and aperture value that have been set automatically by the camera are
displayed.
• The super control panel is not displayed while the shutter button is pressed.
3
Release the shutter
Press the shutter button all
the way (fully).
• The shutter sounds and the picture is taken.
• The card access lamp blinks and the camera starts recording the picture.
Never remove the battery or card while the card access lamp is blinking. Doing so could
destroy stored pictures and prevent storage of pictures you have just taken.
16
EN
s0018_e_00_0_unified.book Page 17 Tuesday, March 18, 2008 4:08 PM
Basic guide
Holding the camera
Keep your fingers and the
strap away from the lens
and flash.
Horizontal grip
It is possible to use the LCD monitor as a
viewfinder and check the subject’s composition,
or shoot while viewing an enlarged display on
the LCD monitor. g“Using live view” (P. 36)
Taking a picture
while viewing the
monitor
1
Vertical grip
Press the u (live
view) button to switch
to live view
Shutter button
u button
P
250 F5.6
2
LN
38
Press the shutter button to
take the picture
• The picture is taken with the focus
adjusted.
Preparations for shooting
• The subject is displayed on the
LCD monitor.
When the camera stops operating
If no operations are performed for approximately 8 seconds while the camera is
on, the monitor backlight turns off to save battery power (when the super control
panel is lit). If no operations are performed for approximately one minute
thereafter, the camera enters the sleep mode (stand-by) and stops operating. The
camera activates again when you touch any button (the shutter button, q button,
etc.). g“BACKLIT LCD (Backlight timer)” (P. 93), “SLEEP” (P. 93)
17
EN
s0018_e_00_0_unified.book Page 18 Tuesday, March 18, 2008 4:08 PM
Playback/Erasing
Playing back
images
Pressing the q button displays the last picture
taken.
Displays the frame
that is stored 10
frames back
q button
Displays the
previous frame
Displays the
next frame
Arrow pad
Displays the frame
that is stored 10
frames ahead
Close-up
playback
Each time you turn the control dial towards U, the
image is incrementally enlarged from 2× to 14×.
Control dial
Erasing images
Play back the image you want to erase and press the
S button.
Use ac to select [YES] and press the i button to
erase.
S button
ERASE
YES
NO
CANCEL
18
EN
SELECT
GO
s0018_e_00_0_unified.book Page 19 Tuesday, March 18, 2008 4:08 PM
Indications used in this manual
x Notes
Important information on factors which may lead to a
malfunction or operational problems. Also warns of
operations that should be absolutely avoided.
TIPS
Useful information and hints that will help you get the most
out of your camera.
g
Reference pages describing details or related information.
Basic guide
The operation button icons on the body of the camera are used to indicate the
operation buttons in this manual. See “Names of parts and functions” (gP. 2).
In this manual, j indicates the control dial.
The following symbols are used throughout this manual.
To make the most of this manual
You can use the “Table of Contents” (P. 20) or “Index” (P. 145) as well as the following
reference to search for information on camera functions and operations. Use this manual
according to shooting conditions and to find the desired information.
For information on how to operate the camera:
g“Using the direct buttons” (P. 27)
“Using the super control panel” (P. 28)
“Using the menu” (P. 29)
Functions available during live view:
g“Using live view” (P. 36)
To search for a function from a list:
g“Menu directory” (P. 130)
“Index” (P. 145)
Preparations for shooting
For information on the possible shooting functions:
g“Shooting guides” (P. 31)
19
EN
s0018_e_00_0_unified.book Page 20 Tuesday, March 18, 2008 4:08 PM
Table of Contents
Basic guide
2
Identifies the camera part names and describes the basic steps for shooting and
playback.
Names of parts and functions........................................................................................ 2
Camera ......................................................................................................... 2
Mode dial....................................................................................................... 4
Viewfinder ..................................................................................................... 6
Super control panel ....................................................................................... 7
LCD monitor (Live view)................................................................................ 8
LCD monitor (Playback) ................................................................................ 9
Unpack the box contents............................................................................. 10
Preparations for shooting ............................................................................................ 11
Preparing the battery................................................................................... 11
Attaching a lens to the camera.................................................................... 12
Loading the card ......................................................................................... 13
Power on ..................................................................................................... 14
Setting the date/time ................................................................................... 15
Shooting ...................................................................................................... 16
Playback/Erasing ........................................................................................ 18
Indications used in this manual ................................................................... 19
1 Basic camera operations
26
Describes the basic operations of the camera.
Using the direct buttons............................................................................................... 27
Using the super control panel...................................................................................... 28
Using the menu ........................................................................................................... 29
Resetting to the factory default settings ...................................................................... 30
2 Shooting guides k Improving your shooting skills 31
Describes shooting methods for various shooting situations.
Basic function guides................................................................................................... 31
Focus k Operating the shutter button........................................................ 31
Brightness k Exposure compensation....................................................... 31
Color k White balance............................................................................... 32
Convenient settings k Customizing functions ........................................... 32
A guide to functions for different subjects.................................................................... 32
Taking landscape pictures .......................................................................... 32
Taking flower pictures ................................................................................. 34
Taking night scene pictures ........................................................................ 35
20
EN
s0018_e_00_0_unified.book Page 21 Tuesday, March 18, 2008 4:08 PM
3 Using live view
36
Functions and operations available only during live view will be explained.
Activating live view ......................................................................................................36
Functions available during live view ............................................................36
The live view mechanism ............................................................................37
Taking a picture using live view ...................................................................................37
AF operation during live view ......................................................................38
Using the face detection function ................................................................................39
Taking a picture using manual focus ...........................................................................40
Switching the information display ................................................................................40
Taking a picture while comparing the effect ................................................................41
Enlarged display operation ..........................................................................................41
Panorama shooting .....................................................................................................42
4 Exposure
43
Describes functions related to exposure, which is important for shooting. These functions
are for determining the aperture value, shutter speed, and other settings by measuring the
brightness in the picture.
Program shooting ........................................................................................................43
Aperture priority shooting ............................................................................................44
Shutter priority shooting...............................................................................................44
Manual shooting ..........................................................................................................45
Bulb shooting...............................................................................................46
Preview function ..........................................................................................................47
Changing the metering mode ......................................................................................47
Exposure compensation ..............................................................................................48
AE lock ........................................................................................................................49
AE bracketing ..............................................................................................................50
ISO sensitivity setting ..................................................................................................51
5 Focusing and shooting functions
52
Describes the optimal focusing methods according to the subject and shooting conditions.
AF mode selection .......................................................................................................52
S-AF (single AF)..........................................................................................52
C-AF (continuous AF)..................................................................................53
MF (manual focus) ......................................................................................53
Simultaneous use of S-AF mode and MF mode (S-AF+MF) ......................53
Simultaneous use of C-AF mode and MF mode (C-AF+MF) ......................53
AF target selection.......................................................................................................54
Registering the AF target position ...............................................................55
Focus lock k If correct focus cannot be obtained ......................................................56
Sequential shooting .....................................................................................................57
Self-timer shooting.......................................................................................................58
Remote control shooting..............................................................................................58
21
EN
s0018_e_00_0_unified.book Page 22 Tuesday, March 18, 2008 4:08 PM
Anti-shock.................................................................................................................... 60
Image stabilizer ........................................................................................................... 60
Checking the image stabilizer effect with live view ..................................... 61
6 Record mode, white balance, and picture mode
62
Describes image adjustment functions specific to digital cameras.
Selecting the record mode........................................................................................... 62
Recording formats....................................................................................... 62
Selecting the record mode .......................................................................... 63
Selecting the white balance......................................................................................... 64
Setting the auto/preset/custom white balance ............................................ 65
WB compensation ....................................................................................... 65
Setting the one-touch white balance ........................................................... 66
WB bracketing ............................................................................................................. 67
Picture mode ............................................................................................................... 67
Gradation..................................................................................................................... 68
Noise reduction............................................................................................................ 69
Noise filter.................................................................................................................... 69
7 Flash shooting
70
Describes how to shoot with the built-in flash and an external flash.
Flash mode setting ...................................................................................................... 70
Built-in flash shooting .................................................................................................. 73
Flash intensity control.................................................................................................. 74
Flash bracketing .......................................................................................................... 74
External flash shooting ................................................................................................ 75
Shooting with the Olympus wireless RC flash system................................................. 76
Using commercially available flashes.......................................................................... 78
8 Playback functions
79
Describes the functions for image playback.
Single-frame/Close-up playback.................................................................................. 79
Light box display.......................................................................................................... 80
Index display/Calendar display.................................................................................... 81
Information display ...................................................................................................... 82
Slideshow .................................................................................................................... 83
Rotating images........................................................................................................... 83
Playback on TV ........................................................................................................... 84
Editing still images....................................................................................................... 84
Copying images........................................................................................................... 86
Protecting images........................................................................................................ 87
Erasing images............................................................................................................ 88
22
EN
s0018_e_00_0_unified.book Page 23 Tuesday, March 18, 2008 4:08 PM
9 Customizing your camera
89
Describes how to customize the camera’s settings.
Custom Menu 1 ...........................................................................................................89
a AF/MF .....................................................................................................................89
AF ILLUMINAT. ...........................................................................................89
FOCUS RING..............................................................................................89
RESET LENS ..............................................................................................89
BULB FOCUSING .......................................................................................89
LIVE VIEW AF MODE .................................................................................89
b BUTTON/DIAL ........................................................................................................89
DIAL FUNCTION.........................................................................................89
DIAL DIRECTION........................................................................................90
AEL/AFL ......................................................................................................90
AEL/AFL MEMO..........................................................................................91
; FUNCTION...........................................................................................91
j FUNCTION ...........................................................................................92
MY MODE SETUP ......................................................................................92
BUTTON TIMER .........................................................................................92
A........................................................................................................92
n (arrow pad) LOCK................................................................................92
c RELEASE/j.........................................................................................................93
RLS PRIORITY S/RLS PRIORITY C ..........................................................93
d DISP/8/PC............................................................................................................93
8................................................................................................................93
SLEEP.........................................................................................................93
BACKLIT LCD (Backlight timer) ..................................................................93
4 h TIMER (Auto power off).........................................................................93
USB MODE .................................................................................................93
LIVE VIEW BOOST.....................................................................................94
g FACE DETECT ......................................................................................94
FRAME ASSIST (Ruled lines display).........................................................94
e EXP/e/ISO ..........................................................................................................94
EV STEP .....................................................................................................94
ISO-AUTO SET ...........................................................................................94
ISO-AUTO ...................................................................................................94
AELMetering................................................................................................95
BULB TIMER...............................................................................................95
f # CUSTOM............................................................................................................95
#X-SYNC. ..................................................................................................95
#SLOW LIMIT ............................................................................................95
w+F .........................................................................................................95
AUTO POP UP............................................................................................95
23
EN
s0018_e_00_0_unified.book Page 24 Tuesday, March 18, 2008 4:08 PM
g K/COLOR/WB...................................................................................................... 95
ALL >..................................................................................................... 95
COLOR SPACE .......................................................................................... 96
SHADING COMP. ....................................................................................... 96
K SET....................................................................................................... 96
PIXEL COUNT ............................................................................................ 96
h RECORD/ERASE ................................................................................................... 96
QUICK ERASE............................................................................................ 96
RAW+JPEG ERASE ................................................................................... 97
FILE NAME ................................................................................................. 97
PRIORITY SET ........................................................................................... 97
dpi SETTING............................................................................................... 97
i K UTILITY ............................................................................................................ 98
CLEANING MODE ...................................................................................... 98
CU/HI ............................................................................................. 98
Custom Menu 2 ........................................................................................................... 98
X (Date/time setting) ................................................................................ 98
CF/xD .......................................................................................................... 98
EDIT FILENAME ......................................................................................... 98
s (Monitor brightness adjustment)........................................................... 98
W (Changing the display language) ...................................................... 98
VIDEO OUT ................................................................................................ 99
REC VIEW .................................................................................................. 99
PIXEL MAPPING ........................................................................................ 99
FIRMWARE................................................................................................. 99
10 Printing
100
Describes how to print your pictures.
Print reservation (DPOF) ........................................................................................... 100
Print reservation ........................................................................................ 100
Single-frame reservation ........................................................................... 100
All-frame reservation ................................................................................. 101
Resetting the print reservation data .......................................................... 101
Direct printing (PictBridge)......................................................................................... 102
Connecting the camera to a printer........................................................... 103
Easy printing ............................................................................................. 103
Custom printing ......................................................................................... 104
11 Using the OLYMPUS Master software
106
Describes how to transfer and store your camera images to a computer.
24
EN
Flowchart ................................................................................................................... 106
Using the provided OLYMPUS Master software ....................................................... 106
What is OLYMPUS Master?...................................................................... 106
Connecting the camera to a computer ...................................................................... 107
Start up the OLYMPUS Master software................................................................... 108
s0018_e_00_0_unified.book Page 25 Tuesday, March 18, 2008 4:08 PM
Displaying camera images on a computer ................................................................108
Downloading and saving images...............................................................108
Disconnecting the camera from your computer.........................................108
Viewing still images ...................................................................................................109
To increase the number of languages .......................................................................110
Transferring images to your computer without using OLYMPUS Master ..................110
12 Shooting tips and maintenance
111
Refer to this section for troubleshooting and camera maintenance information.
Shooting tips and information ....................................................................................111
Tips before you start taking pictures .........................................................111
Shooting tips..............................................................................................111
Additional shooting tips and information....................................................114
Playback tips .............................................................................................116
Viewing pictures on a computer ................................................................116
Error codes ................................................................................................................117
Camera maintenance ................................................................................................119
Cleaning and storing the camera ..............................................................119
Cleaning mode k Removing dust ............................................................120
Pixel mapping k Checking the image processing functions ....................120
13 Information
121
Refer to this section for information on optional accessories, camera specifications, and
other useful shooting information.
Card basics................................................................................................................121
Usable cards .............................................................................................121
Formatting the card ...................................................................................121
Battery and charger ...................................................................................................122
Using your charger abroad ........................................................................................122
Interchangeable lenses .............................................................................................122
ZUIKO DIGITAL interchangeable lens ......................................................122
ZUIKO DIGITAL lens specifications ..........................................................123
Program line diagram (P mode) ................................................................................125
Exposure warning display..........................................................................................125
Flash modes that can be set by shooting mode ........................................................126
White balance color temperature...............................................................................127
Record mode and file size/number of storable still pictures ......................................128
Functions that can be registered with My Mode and Custom Reset Setting .............129
Menu directory ...........................................................................................................130
Glossary ....................................................................................................................133
Specifications ............................................................................................................136
SAFETY PRECAUTIONS..........................................................................................139
Index ..........................................................................................................................145
25
EN
s0018_e_00_0_unified.book Page 26 Tuesday, March 18, 2008 4:08 PM
1
Basic camera operations
There are three basic ways to make function settings with this camera.
1 Using the direct buttons to operate the camera P. 27
You can make the function settings by rotating the control dial while pressing the direct
buttons assigned to a function.
1
2 Setting while looking at the super control panel P. 28
You can make the function settings with the super control panel on the LCD monitor. You can
use the super control panel to view the current settings and directly change the settings.
Basic camera operations
3 Setting on the menu P. 29
You can use the menu to set shooting and playback settings and customize camera
functions.
Descriptions in this manual
The operating instructions of the direct buttons, super control panel and menu are described
as follows in this manual.
• “+” indicates operations performed at the same time.
• “” indicates you should proceed to the next step.
e.g.: When setting the flash intensity control
26
EN
Direct button
# + Fj
Super control panel
ip: [w]
Menu
MENU[X][w]
s0018_e_00_0_unified.book Page 27 Tuesday, March 18, 2008 4:08 PM
Using the direct buttons
1
Press the button for the function you want to set.
• The direct menu is displayed.
e.g.) Setting Sequential/Self-timer/
Remote control shooting
Control dial
6
7
2
1
10
8
SELECT
GO
Direct menu
2
4
9
5
Turn the control dial to change the setting.
• Press the i button to confirm your setting. Or if you do not operate the control dial within a
few seconds, your setting will be confirmed and the super control panel screen will be
restored. g“BUTTON TIMER” (P. 92)
Basic camera operations
3
1
List of direct buttons
No.
Direct buttons
Function
Ref. page
Sequential shooting/Self-timer/
Remote control
P. 57-58
j/Y/<
Sequential shooting/Self-timer/
Remote control button
2
F
Exposure compensation button
Exposure compensation
P. 48
3
P
AF target button
AF target selection
P. 54
1
4
o
Image stabilizer button
Sets image stabilizer
P. 60
5
u
Live view button
Turns live view on or off
P. 36
6
#
Flash button
Pops up the flash and sets flash
mode
P. 70
7
WB
White balance button
Sets white balance
P. 64
8
AF
Focus mode button
Sets focus mode
P. 52
9
ISO
ISO button
Sets ISO sensitivity
P. 51
10
d
Metering button
Sets metering mode
P. 47
2
+
6
F
+
#
Flash intensity control
P. 74
Exposure compensation button
Flash button
TIPS
To assign other functions so they can be set with direct buttons:
j You can also assign frequently used functions to the < and j/Y/< buttons.
g“; FUNCTION” (P. 91), “j FUNCTION” (P. 92)
27
EN
s0018_e_00_0_unified.book Page 28 Tuesday, March 18, 2008 4:08 PM
Using the super control panel
Select an item on the super control panel and change the setting.
1
Press the INFO button to display the super
control panel on the LCD monitor.
Control dial
• Press the INFO button again to turn off the super
control panel.
• Press the i button during live view to display the
super control panel.
1
Basic camera operations
2008. 08.16
AF
INFO button
i button
OFF
p Arrow pad
arge
Normal
2
3
Press the i button.
• The cursor on the super control panel
lights.
ISO
Use p to move the cursor to the
function you want to set.
METERING
OFF
arge
Normal
Cursor
4
OFF
arge
Normal
The name of the selected
function is displayed.
Use the control dial to change the setting.
• Press the i button to display the direct menu indicated
at the position of the cursor. You can also use the direct
menu to change the setting. After changing the setting,
press the i button to confirm your setting. If no
operation is made within a few seconds, your setting is
confirmed and the super control panel is displayed.
METERING
SELECT
GO
Direct menu
For details on the functions that can be set with the super control panel, refer to
“Super control panel” (gP. 7).
28
EN
s0018_e_00_0_unified.book Page 29 Tuesday, March 18, 2008 4:08 PM
Using the menu
1
Press the MENU button.
• The menu is displayed on the LCD monitor.
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
SELECT
GO
MENU button
p Arrow pad
Operation guide is displayed at the bottom of the screen.
CANCEL MENU : Press the MENU button to cancel the setting.
: Press dac on the arrow pad to move the cursor and select an item.
The symbols displayed on the LCD monitor correspond to the arrow pad
shown below.
t: a u: c 8: d 7: b
: Press the i button to confirm your settings.
SELECT
GO OK
2
Use ac to select a tab
and d to set an item.
METERING
RC MODE
AF MODE
AF AREA
ANTI-SHOCK z
CANCEL
Tab
SELECT
OFF
0.0
S-AF
AUTO
OFF
GO
3
Use ac to select a function and d to go to the
setting screen.
METERING
RC MODE
AF MODE
AF AREA
ANTI-SHOCK z
CANCEL
SELECT
METERING METERING
RC MODE
OFF
0.0
S-AF
AUTO
OFF
AF MODE
AF AREA
ANTI-SHOCK
GO
The current setting
is displayed
Types of tabs
W (Shooting menu 1)
Sets shooting functions.
X (Shooting menu 2)
Sets shooting functions.
q (Playback menu)
Sets playback functions.
Y (Custom menu 1)
Customizes shooting functions. Depending on the
function being customized, the function is further
separated into 9 tabs (A to I).
Z (Custom menu 2)
Sets the basic functions of the camera.
4
1
Basic camera operations
WB
CANCEL
i button
NORM
N
AUTO
CANCEL
SELECT
GO
Function
Screenshot of menu with the Y
tab selected
AF/MF
BUTTON/DIAL
RELEASE/
DISP/8/PC
EXP/e/ISO
#CUSTOM
CANCEL
SELECT
GO
Tab
Press the i button to confirm your settings.
• Press the i button repeatedly to exit the menu.
For details on the functions that can be set with the menu, refer to “Menu
directory” (gP. 130).
29
EN
s0018_e_00_0_unified.book Page 30 Tuesday, March 18, 2008 4:08 PM
Resetting to the factory default settings
Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. To reset the camera to the factory default settings, set [RESET]. You
can register settings in advance to [RESET1] and [RESET2]. The camera settings at that
time are registered in [RESET1] and [RESET2]. For details on the registered functions, refer
to “Functions that can be registered with My Mode and Custom Reset Setting” (gP. 129).
1
Registering [RESET1]/[RESET2]
Basic camera operations
Menu
1
2
MENU[W][CUSTOM RESET]
Select either [RESET1]/[RESET2] to register and press d.
• If settings have already been registered, [SET] is displayed next to [RESET1]/[RESET2].
Selecting [SET] again overwrites the registered setting.
• To cancel the registration, select [RESET].
Select [SET] and press the i button.
Using reset settings
You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default
settings.
[RESET]
: Resets to the factory default settings. For the default settings, see
“Menu directory” (gP. 130).
[RESET1]/[RESET2] : Resets to the registered settings.
Menu
1
2
MENU[W][CUSTOM RESET]
Select [RESET], [RESET1] , or [RESET2] and press
the i button.
Use ac to select [YES], then press the i
button.
RESET1
YES
NO
CANCEL
30
EN
SELECT
GO
s0018_e_00_0_unified.book Page 31 Tuesday, March 18, 2008 4:08 PM
2
Shooting guides k Improving your shooting skills
Basic function guides
To familiarize yourself with the camera, you can start off by taking pictures of surrounding
subjects, such as children, flowers and pets. If the pictures taken are not to your liking, try
adjusting some of the settings below. You can take more satisfying pictures simply by
familiarizing yourself with these basic camera functions.
Focus k Operating the shutter button
Halfway
down:
All the way
down:
g“Shooting” (P. 16), “Focus lock k If correct focus
cannot be obtained” (P. 56)
Even when the subject is in focus, the picture can become
blurred if you move the camera while the shutter button is
being pressed. This is called “camera shake”. Make sure
how to properly hold the camera. The camera is particularly
subject to shaking when using live view to take pictures while viewing the subject on the
monitor. You can reduce camera shake by using the image stabilizer.
g“Holding the camera” (P. 17), “Image stabilizer” (P. 60)
In addition to incorrect focusing and camera shake, movement of the subject can also cause
blurring of the picture. In this case, use a shutter speed that matches the motion of the
subject. You can confirm the actual shutter speed and aperture on the displays of the
viewfinder and monitor by pressing the shutter button halfway.
2
Shooting guides k Improving your shooting skills
A picture can become out of focus when the focus in the
picture is on the foreground, background, or other objects in
the picture instead of on the subject. To prevent out-offocus pictures, be sure to focus on the subject you are
trying to capture. The shutter button can be pressed
halfway down (half-press) and all the way down (full press).
Once you are able to operate the shutter button effectively,
you can focus accurately even on moving subjects.
g“Viewfinder” (P. 6), “Super control panel” (P. 7), “LCD monitor (Live view)” (P. 8)
Brightness k Exposure compensation
The camera automatically determines the aperture value
and shutter speed according to the brightness level. This is
called auto exposure. However, you may not be able to
capture the intended picture with auto exposure alone. In
this case, you can increase or decrease the auto exposure
setting. Compensate the exposure toward + to enhance the
brightness of a summer beach or the whiteness of snow.
Compensate the exposure toward – when the area to be
shot is brighter but smaller compared to its surrounding
area. If you are unsure of how much exposure
compensation is required, try taking several pictures at various settings and then compare
the pictures.
g“Exposure compensation” (P. 48), “AE bracketing” (P. 50)
31
EN
s0018_e_00_0_unified.book Page 32 Tuesday, March 18, 2008 4:08 PM
Color k White balance
Besides sunlight, there are other sources for illuminating the subject, such as tungsten and
fluorescent lighting. These types of lighting contain particular colors; therefore, the same
white object shot under different lighting has slightly different colors. Even under the same
sunlight, the colors in the picture differ depending on the sky conditions, the shadows of trees
or buildings, and other factors. White balance automatically corrects the effects from these
types of lighting and enables shooting with the right colors. You can usually obtain the right
colors with the white balance set to [AUTO]. Depending on the shooting conditions, however,
you may not be able to obtain the intended colors. In this case, change the setting
accordingly.
2
g“Selecting the white balance” (P. 64)
Fluorescent light
Tungsten light
Shade of tree
Shooting guides k Improving your shooting skills
Convenient settings k Customizing functions
This camera is equipped with various shooting functions that can be customized for ease of
use.
For example, if you want to take several pictures of the same subject using the same
settings, you can register those settings as My Mode for use at a later time. You can then
easily load that registered My Mode and use it as the shooting mode.
To focus on the subject and then recompose the shot, you can set [AEL/AFL] so that auto
focus can be done by pressing the AEL/AFL button, and then you can lock the exposure by
pressing the shutter button halfway.
You can customize other camera operations, such as by changing the functions assigned to
the buttons and by changing the time that the direct buttons remain selected.
g“MY MODE SETUP” (P. 92), “AEL/AFL” (P. 90), “; FUNCTION” (P. 91),
“j FUNCTION” (P. 92), “BUTTON TIMER” (P. 92)
A guide to functions for different subjects
This section describes the functions suitable under different shooting conditions depending
on the subject.
Taking landscape pictures
This section describes how to take outdoor scenery pictures of forests, lakes and beaches in
daylight.
32
EN
s0018_e_00_0_unified.book Page 33 Tuesday, March 18, 2008 4:08 PM
Changing shooting mode
The proper shooting method varies depending on whether
you are trying to capture the silence of a still scene or the
dynamism of a motion scene.
• To capture the depth of a forest, focus with a wider range
of the image. Use A (aperture priority shooting) mode
and close the aperture (increase the aperture value) as
much as possible.
• To capture the waves crashing against the seashore, use
S (shutter priority shooting) mode and select a fast
shutter speed. To capture a flowing waterfall or river,
shoot using a slow shutter speed.
Exposure compensation can be used even under different shooting modes. Check the image
that you have shot and use + or – to adjust the exposure to obtain better results.
The color of water in pictures appears different depending
on whether it is a lake reflecting nearby trees or a seashore
surrounded by a coral reef. To capture the subtle difference
in color, try changing the white balance setting. Change the
setting for different situations, such as by using [55300K]
for sunny days and [27500K] for outdoor shaded areas
on sunny days.
Changing metering mode
Depending on the depth of the water and the direction of the sun,
the brightness of the water can differ significantly in different
areas of the same composition. There is also a difference in the
brightness of forests depending on the way the trees overlap each
other. If you know which areas you want to emphasize the
compensation in the image composition, you can change the
metering mode. When set to [e] (Digital ESP metering), the
camera automatically assesses the brightness in the composition
and determines the exposure. To emphasize a specific partial
exposure in the composition, change the metering mode to [J]
(center weighted metering) or [n] (spot metering), adjust the
metering area to the locations that you want to adjust the
exposure and then measure the exposure.
Shooting guides k Improving your shooting skills
Changing white balance
2
Changing saturation
There may be times when you cannot reproduce the desired color even when using white
balance or exposure compensation. In this case, you can change the [SATURATION] setting
to achieve the desired color. The [SATURATION] setting includes two levels of high and low
settings. When the setting is high, a vivid color is used.
g“Aperture priority shooting” (P. 44), “Shutter priority shooting” (P. 44), “Changing the
metering mode” (P. 47), “Exposure compensation” (P. 48), “Selecting the white
balance” (P. 64), “[SATURATION] : Vividness of the color” (P. 68)
33
EN
s0018_e_00_0_unified.book Page 34 Tuesday, March 18, 2008 4:08 PM
Taking flower pictures
The proper method for taking pictures of flowers differs depending on whether you want to
capture, for example, a single flower, a field of blooming flowers, a deep red rose, or the light
color of a sweet pea.
Changing white balance
2
Shooting guides k Improving your shooting skills
There are many colors of flowers ranging from light to vivid
ones. Depending on the colors of the flowers, subtle color
shades may not be captured as seen. In this case, you can
check the light conditions and change the white balance
setting. At [AUTO], the camera automatically determines
the type of light and shoots using the proper white balance.
However, you can bring out subtle color shades more
effectively by changing the setting according to shooting
conditions, such as by using [55300K] for sunny days
and [27500K] for outdoor shaded areas on sunny days.
Using exposure compensation
When shooting flowers against a background, select as
simple a background as possible to bring out the shape and
color of the flower. When shooting bright and whitish
flowers, adjust the exposure compensation to – (minus) so
that the flower stands out from the darker background.
Changing shooting mode
The proper shooting method when taking pictures of flowers differs
depending on whether you want to emphasize a single flower or
capture a field of flowers. To change the focus area, set the camera
to A (aperture priority shooting) mode and select the aperture
value.
• When you open the aperture (decrease the aperture value), the
camera focuses within a shorter range (with a shallow depth of
field), emphasizing the subject against a blurred background.
• When you close the aperture (increase the aperture value), the
camera focuses over a wider range (with more depth of field),
producing a picture with both the foreground and background in
focus.
You can use the preview function to confirm the changes in the
depth of field when the aperture is changed.
Using live view
When using a conventional digital single-lens reflex camera with interchangeable lens
system, it was necessary to wait until after taking the picture to check the results of the
exposure compensation and white balance settings. With the live view function of this
camera, however, you can use the monitor to display and check the subject you want to
capture.
34
EN
s0018_e_00_0_unified.book Page 35 Tuesday, March 18, 2008 4:08 PM
Changing lenses
When the blooming flowers are few and sparse, take the picture using a telephoto lens. With
a telephoto lens, you take pictures in which subjects at different distances appear closer
together, giving the impression of a more densely blooming flower field. Using the telescopic
feature of the zoom lens also achieves the same effect, but it is easier to achieve this effect
when the focal length of the lens is longer, such as 150 mm or 200 mm, rather than 54 mm.
g“Aperture priority shooting” (P. 44), “Using live view” (P. 36), “Exposure
compensation” (P. 48), “Selecting the white balance” (P. 64)
Taking night scene pictures
There are different types of night scenes, from the afterglow of a sunset and city lights at
night to special light displays and firework displays.
Because a slow shutter speed is needed to capture night
scenes, a tripod is required to prevent camera shake. If a
tripod is not available, you should place the camera on a
stable surface to prevent camera shake. Even if the
camera is secured, camera shake may occur when
pressing the shutter button. Therefore, it is recommended
to use the remote control or self timer.
Changing shooting mode
Night scenes have different levels of brightness, and the balance of the brightness in the
composition is not uniform. Start by using A (aperture priority shooting) mode to take the
picture. Set the aperture to the medium setting (about F8 or F11) and allow the camera to
automatically select the shutter speed. When shooting a night scene, because the camera
sets the exposure to match the dark areas which occupy a majority of the composition and the
image often turns out whitish (overexposed), adjust the exposure compensation to -1 or -1.5.
Use [REC VIEW] to check the image and adjust the aperture and exposure compensation as
necessary.
Image noise can easily occur when shooting at slow shutter speeds. In this case, set [NOISE
REDUCT.] to [ON] to reduce noise.
2
Shooting guides k Improving your shooting skills
Using a tripod
Using manual focus
In cases where you cannot use AF (auto focus) to focus on the
subject because the subject is too dark or you cannot focus in time
to take pictures, such as during a fireworks display, set the AF
mode to [MF] (manual focus) and focus manually. To take pictures
of night scenes, turn the focus ring of the lens and check whether
you can see the lights of the night scene clearly. To take pictures of
a fireworks display, adjust the focus of the lens to infinite unless
you are using a long focus lens. If you know the approximate
distance to the subject, it is recommended that you focus on
something that is at the same distance in advance.
g“Program shooting” (P. 43), “Aperture priority
shooting” (P. 44), “Remote control shooting” (P. 58), “AF mode
selection” (P. 52), “Noise reduction” (P. 69), “REC VIEW” (P. 99)
35
EN
s0018_e_00_0_unified.book Page 36 Tuesday, March 18, 2008 4:08 PM
3
Using live view
Activating live view
It is possible to use the LCD monitor as a viewfinder. You can view the exposure or white
balance effect and the subject’s composition while you take the picture.
1
Press the u button.
• The mirror is raised and the subject is displayed on the LCD
monitor.
• When [AF MODE] was set to [C-AF], it will be set
automatically to [S-AF] (or [S-AF+MF] in case it was set to
[C-AF+MF]).
3
u button
Using live view
Functions available during live view
The following functions can be used during live view.
Focusing during live view
•
•
•
•
•
Taking a picture after selecting the AF system gP. 37
Taking a picture using focus lock gP. 38
Taking a picture while adjusting the focus manually gP. 40
Taking a picture while focusing on a face gP. 39
Taking a picture while checking the focus by enlarging the zone to be focused
gP. 41
Taking a picture while checking the effect
• Taking a picture after comparing the effect of exposure compensation or white
balance gP. 41
• Taking a panoramic picture gP. 42
• Taking a picture while checking the effect of image stabilizer gP. 60
Switching the indications on the LCD monitor
• Turning off the information display/Displaying the histogram or ruled lines gP. 40
• Checking the subject on the monitor even in low light situations gP. 94
x
36
EN
Notes
• If there is a high-intensity light source within the screen, the image may be displayed darker
but will be recorded normally.
• If the live view function is used over a long period, the temperature of the image pickup device
rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either
lower the ISO sensitivity or turn off the camera for some time.
• Exchanging the lens will cause live view to stop.
• The following functions are not available during live view.
C-AF/AE lock/[AEL/AFL]
s0018_e_00_0_unified.book Page 37 Tuesday, March 18, 2008 4:08 PM
The live view mechanism
During live view, the image on the LCD monitor is the same image received by the image
pickup device (Live MOS sensor/imager) that is used for shooting. This way you can check
on the LCD monitor the effects of exposure compensation or white balance. Moreover, you
can also enlarge part of the subject to focus on it or display ruled lines to check that the
composition is level.
While the image appears on the LCD monitor during live view, the mirror is raised and the
shutter is open. Therefore, you will not be able to check the subject in the viewfinder.
Correct metering may not be possible if strong light is coming in through the viewfinder. In
such case attach the eyepiece cover. g“Eyepiece cover” (P. 58)
Taking pictures using the viewfinder
Taking pictures using live view
Viewfinder
3
Using live view
Image pickup
device
Shutter curtain
Mirror
Lens
• The light coming in through the lens
is reflected on the mirror and you can check the
subject in the viewfinder.
• The mirror is raised and the shutter is
open. The image received by image
pickup device is displayed on the LCD
monitor.
Taking a picture using live view
In live view you can choose one of 3 available AF systems. The [LIVE VIEW AF MODE]
setting will determine when and how focusing is performed.
Menu
MENU[Y][a][LIVE VIEW AF MODE]
Characteristics of the live view AF mode
LIVE VIEW AF
MODE
IMAGER AF
(factory default
setting)
AF SENSOR
HYBRID AF
Using the shutter button
Halfway
All the way
down
down
AF operation
using the
Shooting
imager
AF operation
using the AF
k
sensor and
then shooting
AF operation
AF operation
using the
using the AF
imager
sensor and
(approximate
then shooting
focus)
Focus lock
Press the shutter button
halfway or press the
AEL/AFL button.
While holding down the
AEL/AFL button, press
the shutter button all the
way.
While holding down the
AEL/AFL button, press
the shutter button all the
way.
Restrictions on
use
AF
AREA
* Only possible
with compatible
lenses.
11 AF
targets
None
3 AF
targets
None
3 AF
targets
* For the latest information about Olympus lenses compatible with Imager AF, visit the Olympus
website. When you are using a lens that is not compatible with [IMAGER AF], [HYBRID AF] will
be selected automatically.
37
EN
s0018_e_00_0_unified.book Page 38 Tuesday, March 18, 2008 4:08 PM
Taking a picture with [IMAGER AF]
1
2
Press the shutter button halfway.
• When the focus is locked, the AF confirmation mark and
AF target mark light up.
Press the shutter button all the way to take a
picture.
AF confirmation mark
250 F5.6
I-AF
LN
38
AF target mark
3
Taking a picture with [AF SENSOR]
1
Press the shutter button all the way.
Using live view
• The mirror is lowered and the picture is taken after the
focus is locked.
• The image that was displayed on the monitor before
lowering the mirror freezes during focusing.
• If correct focus cannot be obtained, you will hear the
sound of the shutter but the picture will not be taken.
• To focus in advance, hold down the AEL/AFL button
and press the shutter button. When the focus is locked,
the AF confirmation mark lights up. When the AF
confirmation mark is blinking, the focus is not locked.
AF confirmation mark
250 F5.6
LN
38
Taking a picture with [HYBRID AF]
1
2
Press the shutter button halfway.
• The Imager AF will be activated and you can check the
subject on the LCD monitor.
• When the Imager AF achieves approximate focus, the n
mark lights up.
n mark
250 F5.6
o
Press the shutter button all the way.
• The picture is taken in a similar way as when using [AF
SENSOR].
LN
38
AF operation during live view
[IMAGER AF]
When you press the shutter button halfway, AF is performed by the image pickup device. 11
available AF targets allow you to focus on a subject even if it does not appear in the center of
the picture.
[AF SENSOR]
When you press the shutter button all the way, the AF is activated and the picture is taken in
the same way as when taking pictures using the viewfinder (AF is not activated on pressing
the shutter button halfway).
38
EN
s0018_e_00_0_unified.book Page 39 Tuesday, March 18, 2008 4:08 PM
[HYBRID AF]
When you press the shutter button halfway, focusing is performed approximately by the
Imager AF and you can check the subject on the LCD monitor. When you press the shutter
button all the way, the AF is activated in the same way as with the [AF SENSOR] setting. The
approximate focusing distance is obtained when the shutter button is pressed halfway so the
time it takes to actually take the picture after pressing the shutter button all the way is
shortened. When using S-AF+MF, this is very convenient as you can hold the shutter button
pressed halfway and finely adjust the focus while checking the LCD monitor.
Camera status during AF
Imager AF
AF Sensor
Halfway down
All the way down
3
Using live view
AF Sensor
• AF is performed by the image pickup device.
• The mirror is lowered and AF is performed by the
AF sensor. (The mirror is down so the image
display on the monitor freezes just before pressing
the shutter button all the way.)
Using the face detection function
By setting [g FACE DETECT] to [ON], the camera will detect people’s faces in the frame
and adjust the focus and metering automatically.
Direct button
< (The setting changes each time the button is pressed.)
Super control panel
ip[g FACE DETECT]
Menu
MENU[Y][d][g FACE DETECT][ON]
• In order to use the < button, [Fn FACE DETECT] needs to be set up in the menu in
advance. g“; FUNCTION” (P. 91)
• After setting [g FACE DETECT] to [ON] while using the < button, the following functions
are automatically set to the best settings for taking pictures of people.
Function
METERING
GRADATION
LIVE VIEW AF MODE
AF MODE
Setting
e
AUTO
IMAGER AF
S-AF (B)
Ref. page
P. 47
P. 68
P. 37
P. 52
39
EN
s0018_e_00_0_unified.book Page 40 Tuesday, March 18, 2008 4:08 PM
1
If the camera detects a face, a frame will be
displayed in that location.
250 F5.6
• When you press the shutter button, the camera will focus
on the position of the face detection frame (however, if a
single AF target is selected with [AF AREA], the camera
will focus on the AF target selected).
• With [AF SENSOR] or [HYBRID AF], the camera will
focus on the AF target that is closest to the face
detection frame.
x
LN
38
Notes
• During sequential shooting, face detection will work only at the first shot.
• Depending on the subject, the camera may not be able to correctly detect the face.
Taking a picture using manual focus
3
During live view, you can take a picture focusing manually while checking the focus on the
LCD monitor.
Using live view
1
2
Set the AF mode to [S-AF+MF] or [MF]. g“AF mode selection” (P. 52)
Adjust the focus by rotating the focus ring.
• In [S-AF+MF] mode, after pressing the shutter button halfway or pressing the AEL/AFL
button, you can rotate the focus ring to finely adjust the focus before taking the picture.
• Using the enlarged display can be very convenient when adjusting the focus manually.
g“Enlarged display operation” (P. 41)
Switching the information display
You can switch the information displayed on the monitor by pressing INFO button
repeatedly.
Information display on
Information display on
+ Histogram
Enlarged display
(gP. 41)
250 F5.6
250 F5.6
250 F5.6
LN
38
38
38
250 F5.6
0.0
+0.3
+0.7
38
Information display on
+ Ruled lines display
(gP. 94)
40
EN
WB/F
Information display
off
+1.0
GO
Comparison screen
(gP. 41)
s0018_e_00_0_unified.book Page 41 Tuesday, March 18, 2008 4:08 PM
Taking a picture while comparing the effect
You can check the effect of exposure compensation or white balance on a 4-split screen.
1
Press the INFO button repeatedly to display the
comparison screen.
g“Switching the information display” (P. 40)
• The exposure compensation comparison screen is
displayed. Press a to switch to the white balance
comparison screen. Press ac to switch the screen.
2
0.0
Use bd or the control dial to select the setting
value, then press the i button.
• You can take the picture using the set value.
x
+0.3
+0.7
WB/F
+1.0
GO
Notes
• Exposure compensation is not available in M mode.
• This function cannot be used in g mode.
250 F5.6
Using live view
Enlarged display operation
It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.
3
i button
38
1
Press the INFO button repeatedly to display the enlarged display.
2
Use p to move the frame and press the i button.
3
g“Switching the information display” (P. 40)
• The enlargement frame will be displayed.
• The area inside the frame is enlarged and displayed.
• Press and hold the i button to return the enlargement frame to the center after it was
moved.
Turn the control dial to change the magnification (7×/10×).
• Pressing the i button will cancel the enlarged display.
• During enlarged display, AF will not be activated even in the shutter button is pressed all the
way. You can take the picture after checking the focus in the enlarged display.
41
EN
s0018_e_00_0_unified.book Page 42 Tuesday, March 18, 2008 4:08 PM
Panorama shooting
You can enjoy panorama shooting easily using the OLYMPUS xD-Picture Card. Using
OLYMPUS Master (provided CD-ROM) to join a few images shot where the subject’s edges
overlap, you can create a single panorama composite image.
Panorama shooting is possible up to a maximum of 10 images.
250 F5.6
38
3
Using live view
EN
EXIT
EXIT
• Try your best to include the common parts of the overlapping images when shooting the
subject.
1
2
Set the mode. g“Types of scene modes” (P. 5)
• Live view is activated.
Use p to specify the direction for joining, then shoot the
subject with the edges overlapping.
d : Joins the next image to the right.
b : Joins the next image to the left.
a : Joins the next image to the top.
c : Joins the next image to the bottom.
• Shoot while changing the composition such that the subject
overlaps.
• The focus, exposure, etc. will be determined at the first shot.
• The g (warning) mark will be displayed after you have finished taking 10 shots.
• Pressing the i button before shooting the first frame returns to the scene mode selection
menu.
• Pressing the i button in the midst of shooting ends the sequence of panorama shooting,
and allows you to continue with the next one.
x
42
[3]
[2]
Notes
• Panorama shooting cannot be done if the OLYMPUS xD-Picture Card is not loaded in the
camera.
• During panorama shooting, the image previously taken for position alignment will not be
retained. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
s0018_e_00_0_unified.book Page 43 Tuesday, March 18, 2008 4:08 PM
4
Exposure
Program shooting
The camera sets the optimum aperture value and shutter speed automatically according to
the subject brightness.
Set the mode dial to P.
• When the shutter button is half-pressed, the shutter speed
and aperture value are displayed on the viewfinder. Releasing
the shutter button displays the shutter speed and aperture
value on the super control panel screen.
Aperture value
250
F5.6
2008. 08.16
AF
Shutter speed
AF confirmation mark
Exposure
OFF
arge
Normal
Super Control panel
4
Viewfinder
Shooting mode
Program shift (%)
By turning the control dial in the P mode, you can change the combination of
aperture and shutter speed while maintaining the optimum exposure.
g“Program line diagram (P mode)” (P. 125)
• The program shift setting will not be canceled after shooting. To cancel
program shift setting, turn the control dial until the shooting mode indication
% on the viewfinder or super control panel changes to P or turn off the
power.
• Program shift is not available when you are using a flash.
TIPS
The shutter speed and aperture value are blinking:
Program shift
j The optimum exposure cannot be obtained. For details, see “Exposure warning
display” (gP. 125).
43
EN
s0018_e_00_0_unified.book Page 44 Tuesday, March 18, 2008 4:08 PM
Aperture priority shooting
The camera sets the optimum shutter speed automatically for the aperture value you have
selected. When you open the aperture (decrease the aperture value), the camera will focus
within a shorter range (shallow depth of field) and produce a picture with a blurred
background. When you close the aperture (increase the aperture value), the camera will
focus within a longer range. Use this mode when you wish to add changes to the background
representation. Before shooting, you can use the preview function to check how the
background will look in your picture. g“Preview function” (P. 47)
When the aperture
value (f-number) is
increased
When the aperture
value (f-number) is
decreased
4
Set the mode dial to A and turn the control dial to set the aperture value.
Open the aperture (f-number is decreased)
Aperture value
Exposure
Shutter speed
AF confirmation
mark
Shooting mode
Viewfinder
Close the aperture (f-number is increased)
TIPS
To check the depth of field with the selected aperture value:
j See “Preview function” (gP. 47).
To change the exposure adjustment interval:
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 94)
Shutter speed is blinking:
j The optimum exposure cannot be obtained. For details, see “Exposure warning display” (gP. 125).
Shutter priority shooting
The camera sets the optimum aperture value automatically for the shutter speed you have
selected. Set the shutter speed depending on the type of effect you want. A higher shutter
speed allows you to capture a fast-moving subject without blur, and a slower shutter speed
blurs a moving subject, creating a feeling of speed or motion.
A fast shutter
speed can freeze
a fast action
scene without any
blur.
44
EN
A slow shutter
speed will blur a
fast action scene.
This blurring will
give the
impression of
dynamic motion.
s0018_e_00_0_unified.book Page 45 Tuesday, March 18, 2008 4:08 PM
Set the mode dial to S and turn the control dial to set the shutter speed.
Slower shutter speed
Aperture value
Shutter speed
AF confirmation
mark
Shooting mode
Viewfinder
Faster shutter speed
TIPS
The picture looks blurred:
j The possibility of camera shake spoiling your picture increases greatly during macro or ultratelephoto shooting. Raise the shutter speed or use a monopod or tripod to stabilize the camera.
j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera
shake by using the image stabilizer. g“Image stabilizer” (P. 60)
To change the exposure adjustment interval:
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 94)
j The optimum exposure cannot be obtained. For details, see “Exposure warning display” (gP. 125).
Manual shooting
4
Exposure
The aperture value is blinking:
Allows you to set the aperture and shutter speed manually. You can check how much it
differs from the appropriate exposure by using the exposure level indicator. This mode gives
you more creative control, allowing you to make whatever settings you like, regardless of the
correct exposure.
Set the mode dial to M and turn the control dial to set the
value.
• Shutter speed : Turn the control dial to set the value.
Aperture value: Turn the control dial while holding down the
F button to set the value.
• The range of aperture values available varies with the lens
type.
• The shutter speed can be set to 1/4000 - 60 sec. or [BULB].
Open the aperture (f-number is decreased)
Slower shutter speed
F button
Close the aperture (f-number is increased)
Faster shutter speed
• In M mode the exposure level indicator will appear on the super control panel screen. It
shows the difference (ranging from -3 EV to +3 EV) between the exposure value calculated
by the currently selected aperture and shutter speed and the exposure value considered
optimum by the camera. If the difference exceeds ±3 EV, vw will appear in red on both
sides of the indicator.
45
EN
s0018_e_00_0_unified.book Page 46 Tuesday, March 18, 2008 4:08 PM
Exposure level indicator
Underexposure
Overexposure
250
M
F5.6
-0.3
2008. 08.16
Optimum exposure
OFF
arge
Normal
4
Noise in images
During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are
caused when current is generated in those sections of the image pickup device that are not
normally exposed to light, resulting in a rise in temperature in the image pickup device or
image pickup device drive circuit. This can also occur when shooting with a high ISO setting
in a high-temperature environment. To reduce this noise, the camera activates the noise
reduction function.
g“Noise reduction” (P. 69)
Exposure
TIPS
The picture looks blurred:
j The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.
j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera
shake by using the image stabilizer. g“Image stabilizer” (P. 60)
To change the exposure adjustment interval:
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 94)
To switch the operation between setting the shutter speed and aperture value:
j You can set the aperture value using only the control dial. g“DIAL FUNCTION” (P. 89)
x
Notes
• Exposure compensation is not available in M mode.
Bulb shooting
You can take a picture with a bulb exposure time in which the shutter stays open as long as
you hold down the shutter button.
Bulb shooting can also be done using an optional remote control (RM-1). g“Bulb shooting
with the remote control” (P. 60)
In M mode, set the shutter speed to [BULB].
• [buLb] is displayed in the viewfinder and [BULB] on the super control panel.
TIPS
To automatically end bulb shooting after a specified period of time:
j You can set the maximum time for bulb shooting. g“BULB TIMER” (P. 95)
To fix the focus during manual focus shooting:
j You can fix the focus so the focus does not change even if the focus ring is turned during
exposure. g“BULB FOCUSING” (P. 89)
x
46
EN
Notes
• The following functions are not available during bulb shooting.
Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketing
s0018_e_00_0_unified.book Page 47 Tuesday, March 18, 2008 4:08 PM
Preview function
The viewfinder shows the focused area (depth of field) with the selected aperture value.
For the preview function to work by pressing the < button, it is necessary to set the function
of the < button on the menu beforehand.
g“; FUNCTION” (P. 91)
Press the < button to use the preview function.
• When [; FUNCTION] is assigned to [LIVE PREVIEW],
pressing the < button automatically switches the camera to
live view for a preview of the picture on the monitor.
< button
Changing the metering mode
Direct button
dj
Super control panel
ip: [METERING]
Menu
MENU[X][METERING]
Setting display
• You can check the settings in the viewfinder while using
the d button to make the settings.
Viewfinder
: Digital ESP metering
: Center weighted averaging
metering
: Spot metering
: Spot metering
Highlight control
: Spot metering
Shadow control
j
4
Exposure
There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted
averaging metering, and 3 types of spot metering. Select the most suitable mode for the
shooting conditions.
i button
MENU button
d button
METERING
SELECT
GO
e Digital ESP metering
The camera measures the light levels and calculates the light level differences in 49 separate areas
of the image. This mode is recommended for general use. Setting the AF synchronized function to
[ESP+AF] enables metering centered around the AF target that is in focus with AF.
47
EN
s0018_e_00_0_unified.book Page 48 Tuesday, March 18, 2008 4:08 PM
J Center weighted averaging metering
This metering mode provides the average metering between the
subject and the background lighting, placing more weight on the
subject at the center. Use this mode when you do not want the light
level of the background to affect the exposure value.
n Spot metering
The camera meters a very small area around the center of the subject,
defined by the spot metering area mark in the viewfinder. Use this
mode when there is very strong backlight.
nHI Spot metering - highlight control
When the overall background is bright, white areas of the image will
come out gray if you use the camera’s automatic exposure. Using this
mode enables the camera to shift to over-exposure, allowing accurate
white reproduction. Metering area is the same as spot metering.
: Metering area
nSH Spot metering - shadow control
4
When the overall background is dark, black areas of the image will come out gray if you use the
camera’s automatic exposure. Using this mode enables the camera to shift to under-exposure,
allowing accurate black reproduction. Metering area is the same as spot metering.
Exposure
Exposure compensation
In some situations, you may get better results if you manually compensate (adjust) the
exposure value set automatically by the camera. In many cases, bright subjects (such as
snow) will turn out darker than their natural colors. Adjusting toward + makes these subjects
closer to their real shades. For the same reason, adjust toward – when shooting dark
subjects. The exposure can be adjusted in a range of ±5.0 EV.
±0
-2.0EV
Direct button
F+j
+2.0EV
Adjust toward – j
F button
Adjust toward +
Exposure compensation value
Viewfinder
48
EN
s0018_e_00_0_unified.book Page 49 Tuesday, March 18, 2008 4:08 PM
• The exposure compensation indicator is displayed. The
exposure compensation indicator will not be displayed
when the exposure is compensated by 0.
Exposure compensation indicator
+2.0
When set to 1/3 EV increments
2008. 08.16
1/3 EV
When set to 1/2 EV increments
OFF
arge
Normal
1/2 EV
• If the exposure compensation value exceeds the scale of the exposure compensation
indicator, a red vw is displayed on the left and right edges of the indicator.
TIPS
To change the exposure adjustment interval:
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 94)
4
To adjust the exposure compensation using only the control dial:
x
Exposure
j You can set the exposure compensation value without pressing F button.
g“DIAL FUNCTION” (P. 89)
Notes
• Exposure compensation is not available in M and g modes.
AE lock
The metered exposure value can be locked with the AEL/AFL button (AE lock). Use AE lock
when you want a different exposure setting from the one that would normally apply under the
current shooting conditions.
Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic
exposure), but you can lock the exposure alone by pressing the AEL/AFL button.
Press the AEL/AFL button at the position where you wish
to lock the metering values and the exposure will be
locked. The exposure is locked while the AEL/AFL button
is pressed. Now press the shutter button.
• Releasing the AEL/AFL button cancels AE lock.
AEL/AFL button
TIPS
To lock the exposure:
j You can lock the metering result so that it is not canceled when
the AEL/AFL button is released. g“AEL/AFL MEMO” (P. 91)
If you find it difficult to press the AEL/AFL button and
shutter button at the same time:
j You can switch the functions of the AEL/AFL button and the <
button. g“A” (P. 92)
To activate AE lock with a set metering mode:
AE lock
j You can set the metering mode for locking the exposure with the
AE lock. g“AELMetering” (P. 95)
Viewfinder
49
EN
s0018_e_00_0_unified.book Page 50 Tuesday, March 18, 2008 4:08 PM
AE bracketing
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit
subject or a scene at dusk), you can pick the picture you prefer from a selected number of
frames with a variety of different exposure settings (exposure and compensation values). The
pictures are taken in the following order: Picture with optimum exposure, picture adjusted in –
direction, and picture adjusted in + direction.
e.g.) When BKT is set to [3F 1.0EV]
-1.0EV
4
±0
+1.0EV
Exposure
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed. g“EV STEP” (P. 94)
Number of frames: 3
Menu
MENU[X][AE BKT]
AE BKT
AE BKT
WB BKT
FL BKT
CANCEL
OFF
3F 0.3EV
3F 0.7EV
3F 1.0EV
SELECT
Start shooting.
• In single-frame shooting, the exposure changes every
time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
• Releasing the shutter button stops auto bracketing
shooting. When it stops, 0 is displayed in green on
the super control panel.
Viewfinder
GO
The exposure
value for the next
shot is displayed
during shooting.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
TIPS
To apply AE bracketing to the exposure value you have compensated:
j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
50
EN
s0018_e_00_0_unified.book Page 51 Tuesday, March 18, 2008 4:08 PM
ISO sensitivity setting
The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to
shoot in low light conditions. However, higher values may give pictures a grainy appearance.
Direct button
ISOj
Super control panel
ip: [ISO]
Menu
MENU[W][ISO]
: The sensitivity is set automatically according
to the shooting conditions. With the [ISOAUTO SET] setting, you can set the
maximum ISO that is set automatically.
g“ISO-AUTO SET” (P. 94)
[100 - 1600]: Fixed ISO sensitivity.
j
[AUTO]
ISO button
4
ISO
100
–
: Auto
: 100 - 1600
i button
800
SELECT
200
400
1600
Exposure
Setting display
• You can check the settings in the viewfinder while using
the ISO button to make the settings.
MENU button
GO
Viewfinder
TIPS
To automatically set the optimal ISO in M mode:
j Normally, the AUTO setting is not available in M mode, but you can set it for use in all shooting
modes. g“ISO-AUTO” (P. 94)
51
EN
s0018_e_00_0_unified.book Page 52 Tuesday, March 18, 2008 4:08 PM
5
Focusing and shooting functions
AF mode selection
The three focus modes S-AF, C-AF, and MF are available with this camera.
You can take pictures by combining S-AF or C-AF mode with MF mode.
Direct button
AFj
Super control panel
ip: [AF MODE]
Menu
MENU[X][AF MODE]
Setting display
• You can check the settings in the viewfinder while using
the AF button to make the settings.
: S-AF
: C-AF
: MF
: S-AF+MF
: C-AF+MF
5
j
MENU button
AF button
i button
Focusing and shooting functions
AF MODE
S-AF
Viewfinder
MF
C-AF
S-AF+MF
C-AF+MF
SELECT
GO
S-AF (single AF)
Focusing is performed once when the shutter button is pressed halfway.
If focusing fails, release your finger from the shutter button and press it halfway again. This
mode is suitable for taking pictures of still subjects or subjects with limited movement.
Press the shutter button halfway.
• When the focus is locked, the AF confirmation mark lights up.
• A beep sound is output when the subject is in focus.
Viewfinder
AF confirmation
mark
TIPS
When it is difficult to focus in the AF mode in low-light
conditions:
j The built-in flash can function as an AF illuminator. This makes focusing easier in low-light
conditions using AF mode. g“AF ILLUMINAT.” (P. 89)
When you want to quickly switch from AF mode to MF:
j By registering [MF] to the < button, you can press the < button to switch to MF mode.
g“; FUNCTION” (P. 91)
52
EN
When you want to be able to shoot even if the subject is not in focus:
j See “RLS PRIORITY S/RLS PRIORITY C” (gP. 93).
s0018_e_00_0_unified.book Page 53 Tuesday, March 18, 2008 4:08 PM
C-AF (continuous AF)
The camera repeats focusing while the shutter button remains pressed halfway. When the
subject is in motion, the camera focuses on the subject in anticipation of its movement
(Predictive AF). Even if the subject moves or you change the composition of the picture, the
camera continues trying to focus.
Press the shutter button halfway and keep it in this position.
• When the subject is in focus and locked, the AF confirmation mark lights up.
• The AF target does not light up, even when the subject is in focus.
• The camera repeats focusing. Even if the subject moves or even if you change the
composition of the picture, focusing is tried continuously.
• A beep sound is output when the subject is in focus. The beep sound is not output after the
third continuous AF operation, even when the subject is in focus.
MF (manual focus)
This function allows you to manually focus on any subject.
Adjust the focus using the focus ring.
5
Near
TIPS
To change the rotational direction of the focus ring:
j You can select the rotational direction of the focus ring to suit your preference for how the lens
adjusts to the focusing point. g“FOCUS RING” (P. 89)
For information on whether the subject is in focus (Focus aid):
j When you focus the lens on a subject manually (by turning the focus ring), the AF confirmation
mark lights. When P is set with [AF AREA], AF confirmation lights up if the subject is in focus
at the center AF target.
Simultaneous use of S-AF mode and MF mode (S-AF+MF)
Focusing and shooting functions
)
Focus ring
This function allows you to fine-adjust the focus manually by turning the focus ring after AF is
performed in the S-AF mode.
• Press the shutter button halfway. After AF is confirmed, rotate the focus ring to fine-adjust
the focus.
x
Notes
• If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF
is activated and your adjustments are canceled.
Simultaneous use of C-AF mode and MF mode (C-AF+MF)
Focus with the focus ring and press the shutter button halfway to activate C-AF mode.
• While the shutter button is kept pressed, MF cannot be used.
• When the shutter button is not pressed, focusing with MF is possible.
53
EN
s0018_e_00_0_unified.book Page 54 Tuesday, March 18, 2008 4:08 PM
TIPS
Another way to adjust focus manually in C-AF mode:
j You can set the AEL/AFL button to operate C-AF. g“AEL/AFL” (P. 90)
x
Notes
• If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF
is activated and your adjustments are canceled.
AF target selection
This camera has 3 AF targets for focusing on the subject with auto focus. You can select only
one of the AF targets.
When [LIVE VIEW AF MODE] is set to [IMAGER AF], 11 AF targets will be available during
live view. g“Taking a picture using live view” (P. 37)
[AUTO] or P
Focuses using the 3 AF targets.
Q Focuses using the left AF target.
R Focuses using the center AF target.
S Focuses using the right AF target.
Viewfinder
Center AF target
5
Focusing and shooting functions
Left AF target
Right AF target
Direct button
Pj
Super control panel
ip: [AF AREA]
Menu
MENU[X][AF AREA]
• With the [IMAGER AF] setting, target selection is
possible using the P button or the super control panel.
Turn the control dial to select the AF target.
j
MENU button
250 F5.6
P button
i button
AF AREA
When selecting the AF target with
the [IMAGER AF] setting
SELECT
54
EN
GO
s0018_e_00_0_unified.book Page 55 Tuesday, March 18, 2008 4:08 PM
Registering the AF target position
You can register the position of a frequently used AF target. You can then quickly load that
registered setting (“home position”) and use it when shooting.
Registering
1
When selecting an AF target, press the < button
and the F button at the same time.
• The home position is registered at the time the buttons
are pressed.
• The home position cannot be registered when
operated from a menu.
AF AREA
SELECT
HP
GO
Indicates that the AF target
is being registered.
Shooting
To use this function, you must assign the [P HOME] function to the < button in advance.
g“; FUNCTION” (P. 91)
Press the < button.
• The registered home position is selected. Press again to return to the original position.
5
Focusing and shooting functions
1
55
EN
s0018_e_00_0_unified.book Page 56 Tuesday, March 18, 2008 4:08 PM
Focus lock k If correct focus cannot be obtained
The camera’s auto focus may not be able to focus on the subject in situations such as when
the subject is not in the center of the frame. If this happens, the easiest solution is to use
focus lock. Use this when composing the subject outside of the AF targets or when the
subject is difficult to focus on.
1
Adjust the AF target with the subject to be
focused and press the shutter button halfway
until the AF confirmation mark lights up.
Shutter button
• The focus is locked. The AF confirmation mark and
the AF target in focus light up in the viewfinder.
• If the AF confirmation mark blinks, press the shutter
button halfway again.
• While the shutter button is being pressed, the super
control panel disappears.
Card access lamp
e.g.) The camera focuses using the
center AF target.
5
Focusing and shooting functions
AF target
2
AF confirmation
mark
While pressing the shutter button halfway,
move to the desired composition and press
the button all the way.
• The card access lamp blinks while the picture is
being stored on the card.
If the subject has lower contrast than its surroundings
If the contrast of the subject is weak, such as when the lighting is insufficient or the subject
cannot be seen clearly because of fog, the focus may not be achieved. Focus (focus lock) on
a high-contrast object the same distance away as the intended subject, recompose your shot
and then take the picture.
56
EN
s0018_e_00_0_unified.book Page 57 Tuesday, March 18, 2008 4:08 PM
Sequential shooting
Single-frame shooting o Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode).
Sequential shooting j Shoots at 3.5 frames/sec. for as long as the shutter button is
pressed (during JPEG).
• Press the shutter button fully and keep it pressed. The camera will take pictures in
sequence until you release the button.
• Focus, exposure, and white balance are locked at the first frame (during S-AF, MF).
x
Notes
• During sequential shooting, if the battery check blinks due to low battery, the camera stops
shooting and starts saving the pictures you have taken on the card. The camera may not save
all of the pictures depending on how much battery power remains.
Setting method
Direct button
j/Y/<j
Super control panel
ip: [j/Y/<]
j/Y/< button
j
5
Single-frame shooting/
Sequential shooting
Self-timer
Focusing and shooting functions
Setting display
• You can check the settings in the viewfinder while using
the j/Y/< button to make the settings.
Remote control
i button
:
Single-frame shooting
:
Sequential shooting
:
12-second self-timer
:
2-second self-timer
:
0 second
:
2 seconds
SELECT
GO
• Anti-shock display (gP. 60):
The D symbol displayed next to the icon on the super control panel indicates that anti-shock
is activated.
57
EN
s0018_e_00_0_unified.book Page 58 Tuesday, March 18, 2008 4:08 PM
Self-timer shooting
This function lets you take pictures using the self-timer. You can set the camera to release
the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer
shooting.
For the setting method, see “Sequential shooting” (gP. 57).
Press the shutter button all the way.
• When Y12s is selected :
First, the self-timer lamp lights up for approximately
10 seconds, then it blinks for approximately 2
seconds and the picture is taken.
• When Y2s is selected :
The self-timer lamp blinks for approximately 2
seconds, and then the picture is taken.
• To cancel the activated self-timer, press the j/Y/<
button.
x
5
Self-timer lamp
Notes
• Do not press the shutter button while standing in front of the camera; this could result in the
subject being out of focus since focusing is performed when the shutter button is pressed
halfway.
Focusing and shooting functions
Eyepiece cover
When shooting without looking through the viewfinder, attach the eyepiece cover to the
viewfinder to prevent the light entering the viewfinder from changing the exposure. Attach the
eyepiece cover after removing the eyecup as illustrated. The same applies when replacing
with an optional eyecup.
Eyecup
Eyepiece cover
Remote control shooting
By using the optional remote control (RM-1), you can take a picture with yourself in it or a
night scene without touching the camera.
The camera can be set to release the shutter either right away or 2 seconds after the shutter
button on the remote control is pressed. Bulb shooting is also possible when using the
optional remote control.
For the setting method, see “Sequential shooting” (gP. 57).
58
EN
s0018_e_00_0_unified.book Page 59 Tuesday, March 18, 2008 4:08 PM
Mount the camera securely on a tripod, point the
remote control at the remote control receiver on the
camera and press the shutter button on the remote
control.
• When <0s is selected :
The focus and exposure are locked, the remote
control lamp blinks and the picture is taken.
• When <2s is selected :
The focus and exposure are locked, the remote
control lamp blinks, and after approximately 2
seconds the picture is taken.
Remote control lamp
Remote control receiver
Transmitted signal effective area
Point the remote control at the remote control receiver of the camera within the effective area
as shown below.
When powerful lighting such as direct sunlight is shining on the remote control receiver, or
when fluorescent light or devices emitting electrical or radio waves are nearby, it could
narrow the effective area.
Remote control receiver
Remote control
j The transmitted signal may not be effective if the remote control receiver is exposed to powerful
lighting. Move the remote control closer to the camera and press the shutter button on the remote
control again.
j The transmitted signal may not be effective if the remote control is too far from the camera. Move
the remote control closer to the camera and press the shutter button on the remote control again.
j There is signal interference. Change the channel as described in the remote control’s manual.
Focusing and shooting functions
TIPS
The remote control lamp does not blink after the shutter button on the remote control
is pressed:
5
To cancel the remote control shooting mode:
j The remote control shooting mode will not be canceled after shooting. Press the j/Y/< button
to set to [o] (single-frame shooting), etc.
To use the shutter button on the camera in the remote control shooting mode:
j The shutter button on the camera still works even in the remote control shooting mode.
x
Notes
• The shutter will not be released if the subject is not in focus.
• Under bright light conditions, the remote control lamp may be difficult to see, making it hard to
determine whether or not the picture has been taken.
• Zoom is not available on the remote control.
59
EN
s0018_e_00_0_unified.book Page 60 Tuesday, March 18, 2008 4:08 PM
Bulb shooting with the remote control
Set the mode dial to M, then set the shutter speed to [BULB]. g“Bulb shooting” (P. 46)
Press the W button on the remote
control to open the shutter.
When the time set in “BULB
TIMER” (gP. 95) elapses, the
shutter closes automatically.
Press the T button to close the
shutter.
Anti-shock
You can select the interval from the time the mirror is raised until the shutter is released. This
diminishes camera shake caused by vibrations when the mirror moves. This feature can be
useful in astrophotography and microscope photography or other photographic situations
where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum.
5
1
2
3
Focusing and shooting functions
MENU[X][ANTI-SHOCKz]
Select the time delay after the mirror is raised and until the shutter is released
from 1 to 30 seconds and press the i button.
Anti-shock is added to the shooting functions individually (single-frame shooting,
sequential shooting, self-timer shooting, and remote control shooting). For the
setting method, see “Sequential shooting” (gP. 57).
Image stabilizer
You can reduce the amount of camera shake that easily occurs when shooting in low light
situations or shooting with high magnification.
OFF
I.S. 1
I.S. 2
I.S. 3
Image stabilizer is off.
Image stabilizer is on.
This is used for panning with the camera in the horizontal direction to achieve a
blurred background. The horizontal image stabilizer is turned off, and only the
vertical image stabilizer is activated.
This is used for panning with the camera in the vertical direction to achieve a blurred
background (tilting). The vertical image stabilizer is turned off, and only the
horizontal image stabilizer is activated.
Direct button
Viewfinder
60
EN
oj
Displayed when [IMAGE
STABILIZER] is set to
[I.S. 1], [I.S. 2] or [I.S. 3].
j
o button
s0018_e_00_0_unified.book Page 61 Tuesday, March 18, 2008 4:08 PM
Setting the focal length
By setting in advance the focal length of the lens, you can
use the image stabilizer function also with lenses other
than Four Thirds system lenses. This setting is deactivated
when a Four Thirds system lens is attached.
1
2
IMAGE STABILIZER
Press the F button in the [IMAGE STABILIZER]
screen.
Use the control dial or ac to set the focal length
and press i.
OFF
I.S. 1
I.S. 2
FOCAL LENGTH
I.S. 3
50 mm
GO
Focal lengths that can be set
8 mm
10 mm
12 mm
16 mm
18 mm
21 mm
24 mm
28 mm
30 mm
35 mm
40 mm
48 mm
50 mm
55 mm
65 mm
70 mm
75 mm
80 mm
85 mm
90 mm
100 mm
105 mm
120 mm
135 mm
150 mm
180 mm
200 mm
210 mm
250 mm
300 mm
350 mm
400 mm
500 mm
600 mm
800 mm
1000 mm
• If the focal length of the lens you are using is not listed, select the closest value.
Checking the image stabilizer effect with live view
250 F5.6
IS 1
LN
38
Green: Image stabilizer active
Red : Image stabilizer failure
x
Notes
• The image stabilizer cannot correct excessive camera shake or camera shake that occurs
when the shutter speed is set to the slowest speed. In these cases, it is recommended that
you use a tripod.
• When using a tripod, set [IMAGE STABILIZER] to [OFF].
• When using a lens with an image stabilization function, turn off the image stabilization
function of either the lens or the camera.
• If [IMAGE STABILIZER] is set to [I.S.1], [I.S.2] or [I.S.3] and you turn off the camera, the
camera will vibrate. This is due to the camera initializing the image stabilizer mechanism.
Without this initialization, the image stabilizer may not be able to achieve the proper effect.
• If the image stabilizer icon is displayed in red on the monitor, it indicates a failure of the image
stabilizer function. If you take a picture as is, the composition may be off. Consult your
Olympus Authorized Service Center.
5
Focusing and shooting functions
You can hold down the o button during live view to see
the effect of the image stabilizer on the monitor. While in
that position, you can press the shutter button fully to take
a picture.
• When [IMAGE STABILIZER] is set to [OFF], pressing
and holding the o button activates the image stabilizer
([I.S. 1]).
• Either releasing the o button or holding down the o
button for several seconds turns off the image stabilizer.
61
EN
s0018_e_00_0_unified.book Page 62 Tuesday, March 18, 2008 4:08 PM
6
Record mode, white balance, and picture mode
Selecting the record mode
You can select a record mode in which to take pictures. Choose the record mode that is best
for your purpose (printing, editing on a PC, website editing, etc.).
Recording formats
JPEG
For JPEG images, select a combination of image size (Y, X, W) and compression rate (SF,
F, N, B). An image consists of pixels (dots). When you enlarge an image with a low pixel
count, it will be displayed as a mosaic. If an image has a high pixel count, the file size
(amount of data) will be larger and the number of storable still pictures will be lower. The
higher the compression, the smaller the file size. However, the image will have less clarity
when played back.
Image with a high pixel count
Image with a low pixel count
6
EN
Application
Number of pixels increases
Record mode, white balance, and picture mode
62
Image becomes clearer
Select for the
print size
For
small-sized
prints and
use on a
web site
Number of
pixels
Pixel
count
Y (Large)
3648 × 2736
3200 × 2400
2560 × 1920
1600 × 1200
1280 × 960
1024 × 768
X (Middle)
W (Small)
SF (Super
Fine)
1/2.7
YSF
Compression rate
F
N
(Fine)
(Normal)
1/4
1/8
YF
YN
B
(Basic)
1/12
YB
XSF
XF
XN
XB
WSF
WF
WN
WB
640 × 480
RAW
This is unprocessed data that has not undergone changes in white balance, sharpness,
contrast or color. To display as an image on the computer, use OLYMPUS Master. RAW data
cannot be displayed on a different camera or by using common software, and it cannot be
selected for print reservation.
It is possible to edit images taken with the record mode set to RAW data using this camera.
g“Editing still images” (P. 84)
s0018_e_00_0_unified.book Page 63 Tuesday, March 18, 2008 4:08 PM
Selecting the record mode
JPEG
For JPEG, you can register 4 combinations of images sizes (Y, X, W) and compression
rates (SF, F, N, B) from the 12 total combinations available. g“K SET” (P. 96)
When you select the X or W image size, you can further select the pixel size.
g“PIXEL COUNT” (P. 96)
RAW+JPEG
Records both a JPEG and RAW image at the same time each time you take a picture.
RAW
Records the image in RAW data format.
e.g.) The following 9 record modes are available when YF/YN/XN/WN are registered
RAW
: RAW
JPEG
: YF/YN/XN/WN
RAW+JPEG : RAW+YF/RAW+YN/RAW+XN/RAW+WN
Super control panel
ip: [K]
Menu
MENU[W][K]
OFF
TIPS
arge
Normal
To quickly set the record mode:
To find out the file size/number of storable still
pictures for each record mode:
j “Record mode and file size/number of storable still
pictures” (gP. 128)
CARD SETUP
CUSTOM RESETRAW
PICTURE MODE F
N
GRADATION
N
WB
N
CANCEL
SELECT
GO
6
Record mode, white balance, and picture mode
j By setting [RAWK] to the < button, you can turn the
control dial while pressing the < button to change the
record mode.
Each time you press the < button, you can easily switch
between JPEG data only and JPEG and RAW data.
g“; FUNCTION” (P. 91)
63
EN
s0018_e_00_0_unified.book Page 64 Tuesday, March 18, 2008 4:08 PM
Selecting the white balance
Color reproduction differs depending on the light conditions. For instance, when daylight or
tungsten lighting is reflected on white paper, the shade of white produced will be slightly
different for each. With a digital camera, white color can be adjusted to reproduce more
natural white with a digital processor. This is called white balance. There are 4 options for
setting the WB with this camera.
Auto white balance [AUTO]
This function enables the camera to automatically detect white in images and adjust the color
balance accordingly. Use this mode for general use.
Preset white balance [5][2][3][1][w][x][y][n]
8 different color temperatures are programmed on this camera covering a variety of indoor
and outdoor lighting including fluorescent lights, light bulbs, and flashes. For example, use
preset WB when you want to reproduce more red in the picture of a sunset, or capture a
warmer artistic effect under artificial lighting.
Custom white balance [CWB]
You can set the color temperature from 2000K to 14000K. For details on color temperature,
refer to “White balance color temperature” (gP. 127).
g“Setting the auto/preset/custom white balance” (P. 65)
One-touch white balance [V]
You can set the optimum white balance for the shooting conditions by pointing the camera at
a white object like a sheet of white paper. The white balance achieved with this setting is
saved as one of the preset WB settings.
g“Setting the one-touch white balance” (P. 66)
6
Record mode, white balance, and picture mode
64
EN
WB mode
AUTO
Light conditions
Used for most light conditions (when there is a white portion framed in the
viewfinder). Use this mode for general use.
5 5300K
For shooting outdoors on a clear day, or to capture the reds in a sunset or the
colors in a fireworks display
2 7500K
For shooting outdoors in the shadows on a clear day
3 6000K
For shooting outdoors on a cloudy day
1 3000K
For shooting under a tungsten light
w 4000K
For shooting under white fluorescent lighting
x 4500K
For shooting under a neutral white fluorescent lamp
y 6600K
For shooting under a daylight fluorescent lamp
n 5500K
For flash shooting
V
CWB
Color temperature set by one-touch WB.
g“Setting the one-touch white balance” (P. 66)
Color temperature set in custom white balance menu. This can be set from 2000K
to 14000K. When the value has not been set, it is set to 5400K.
s0018_e_00_0_unified.book Page 65 Tuesday, March 18, 2008 4:08 PM
Setting the auto/preset/custom white balance
You can adjust the white balance by selecting the appropriate color temperature for the light
conditions.
WBj
Direct button
j
F button
Super control panel
ip: [WB]
• Custom white balance is set by selecting [CWB] and
turning the control dial while pressing down the F button.
MENU[W][WB]
Menu
Setting display
• You can check the settings in the viewfinder while using
the WB button to make the settings.
MENU button
WB button
i button
: Auto white balance
: w/x/y
: Custom white balance
: One-touch white balance
WB
6
Viewfinder
SELECT
5400
GO
j In the auto WB setting, if there is no near-white color in the image framed in the screen, the white
balance will not be correctly determined. In such a case, try preset WB or one-touch WB settings.
WB compensation
This function lets you make fine changes to the auto WB and preset WB settings.
Super control panel
ip: [>]
Menu
MENU[W][WB]
• Select the white balance to adjust and press d.
Adjusting the white balance in the A direction (AmberBlue)
Depending on the original WB conditions, the image will
become more amber when adjusted toward +, and bluer
when adjusted toward –.
AUTO
>
A
G
+2 –5
Adjusting the white balance in the G direction (GreenAEL
WB PREVIEW
Magenta)
AFL
Depending on the original WB conditions, the image will
CANCEL
SELECT
GO
become greener when adjusted toward +, and magenta
when adjusted toward –.
• The white balance can be adjusted in 7 increments in each direction.
Record mode, white balance, and picture mode
TIPS
When subjects that are not white appear white:
CWB
65
EN
s0018_e_00_0_unified.book Page 66 Tuesday, March 18, 2008 4:08 PM
TIPS
Checking the white balance you have adjusted:
j After setting the compensation value, point the camera at the subject to take test shots. When
the AEL/AFL button is pressed, sample images that have been taken with the current WB
settings are displayed.
Adjusting all WB mode settings at once:
j See “ALL >” (gP. 95).
Setting the one-touch white balance
V
This function is useful when you need a more precise white balance than preset WB can
provide. Point the camera at a sheet of white paper under the light source you want to use to
determine the white balance. The optimum white balance for the current shooting conditions
can be saved in the camera. This is useful when shooting a subject under natural light, as
well as under various light sources with different color temperatures.
Set [; FUNCTION] to [V] beforehand. (gP. 91)
1
2
3
6
Record mode, white balance, and picture mode
66
EN
Point the camera at a sheet of white paper.
• Position the paper so that it fills the viewfinder. Make sure there are no shadows.
While holding down the < button, press the shutter
button.
< button
• The one-touch white balance screen appears.
Select [YES] and press the i button.
• The white balance is registered.
• The registered white balance will be stored in the camera as
a preset WB setting. Turning the power off does not erase the
data.
TIPS
After pressing the shutter button, [WB NG RETRY] is displayed:
j When there is not enough white in the image, or when the image is too bright, too dark or the
colors look unnatural, you cannot register the white balance. Change the aperture and shutter
speed settings, then repeat the procedure from Step 1.
s0018_e_00_0_unified.book Page 67 Tuesday, March 18, 2008 4:08 PM
WB bracketing
Three images with different white balances (adjusted in specified color directions) are
automatically created from one shot. One image has the specified white balance, while the
others are the same image adjusted in different color directions.
Menu
MENU[X][WB BKT]
• Use bd to select the color direction, and ac to set the
EV step.
• Select from [OFF], [3F 2STEP], [3F 4STEP], or [3F
6STEP] for the EV step for both the A-B (amber-blue)
direction and the G-M (green-magenta) direction.
• When the shutter button is pressed down all the way,
3 images adjusted in specified color directions are
automatically created.
WB BKT
A-B
G-M
3F 4STEP
3F 4STEP
CANCEL
SELECT
GO
TIPS
To apply WB bracketing to the white balance you have adjusted:
j Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to
the white balance you have adjusted.
x
Notes
• During WB bracketing, the camera cannot shoot the pictures if there is not enough memory in
the camera and card for storing at least the selected number of frames.
6
Picture mode
Super control panel
ip: [PICTURE MODE]
Menu
MENU[W]
[PICTURE MODE]
PICTURE MODE
CARD SETUP
hVIVID
CUSTOM RESET
iNATURAL
PICTURE MODE
GRADATION jMUTED
ZPORTRAIT
WB
CANCEL
Record mode, white balance, and picture mode
You can select image tone to create unique image effects. You can also fine-adjust image
parameters such as contrast and sharpness for each mode. The adjusted parameters are
recorded in each picture effect mode.
[hVIVID]
: Produces vivid colors.
[iNATURAL] : Produces natural colors.
[jMUTED]
: Produces flat tones.
[ZPORTRAIT] : Produces beautiful skin tones.
[MONOTONE] : Produces black and white tone.
[CUSTOM]
: Select one picture mode, set the parameters, and register the setting.
You can also register the gradation to [CUSTOM]. This setting is set
separately from [GRADATION] in the menu. g“Gradation” (P. 68)
MONOTONE
SELECT
GO
67
EN
s0018_e_00_0_unified.book Page 68 Tuesday, March 18, 2008 4:08 PM
The adjustable parameters are classified according to the
picture modes.
The individual parameters are as follows.
[CONTRAST] : Distinction between light and dark
[SHARPNESS] : Sharpness of the image
[SATURATION] : Vividness of the color
[B&W FILTER] : Creates a black and white image. The
filter color is brightened and the
complementary color is darkened.
[N: NEUTRAL]
[Ye: YELLOW]
[Or: ORANGE]
[R: RED]
[G: GREEN]
[PICT. TONE]
Record mode, white balance, and picture mode
EN
CANCEL
SELECT
GO
iNATURAL
CONTRAST
CONTRAST
SHARPNESS
SATURATION
Lo
Hi
Lo
Lo
+2
Hi
+1 Hi
0 Hi
0
-1
Lo
CANCEL
SELECT
-2
GO
:
:
:
:
:
Creates a normal black and white image.
Sepia
Bluish
Purplish
Greenish
Gradation
In addition to the [NORMAL] gradation setting, you can select from 3 other gradation
settings.
[HIGH KEY] : Gradation for a bright subject.
[LOW KEY] : Gradation for a dark subject.
[AUTO]
: Divides the image into detailed regions and adjusts the brightness
separately for each region. This is effective for images with areas of large
contrast in which the whites appear too bright or the blacks appear too dark.
[NORMAL] : Use [NORMAL] mode for general uses.
HIGH KEY
Suitable for a subject that is
mostly highlighted.
LOW KEY
Suitable for a subject that is
mostly shadowed.
Super control panel
ip: [GRADATION]
Menu
MENU[W][GRADATION]
x
68
J±0
N± 0
T± 0
: Colors the black and white image.
[N: NEUTRAL]
[S: SEPIA]
[B: BLUE]
[P: PURPLE]
[G: GREEN]
6
: Creates a normal black and white
image.
: Reproduces clearly defined white
cloud with natural blue sky.
: Slightly emphasizes colors in blue
skies and sunsets.
: Strongly emphasizes colors in
blue skies and brightness of
crimson foliage.
: Strongly emphasizes colors in red
lips and green leaves.
iNATURAL
CONTRAST
SHARPNESS
SATURATION
Notes
• Contrast adjustment does not work when set to [HIGH KEY], [LOW KEY], or [AUTO].
s0018_e_00_0_unified.book Page 69 Tuesday, March 18, 2008 4:08 PM
Noise reduction
This function reduces the noise that is generated during long exposures. When shooting
night scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE
REDUCT.], you can let the camera reduce noise automatically to produce clearer images.
When set to [AUTO], noise reduction will be activated only when the shutter speed is slow.
When set to [ON], noise reduction will always be activated. While noise reduction is
activated, it takes about twice the usual time to take a picture.
OFF
Menu
ON/AUTO
MENU[W][NOISE REDUCT.]
• The noise-reduction process is activated after shooting.
• The card access lamp blinks during the noise-reduction process. You cannot take more
pictures until the card access lamp turns off.
• [busy] is displayed on the viewfinder while noise reduction is operating.
x
Notes
• During sequential shooting, [NOISE REDUCT.] is [OFF] automatically.
• This function may not work effectively with some shooting conditions or subjects.
You can select the noise processing level. Use [STANDARD] for general use. [HIGH] is
recommended during high sensitivity shooting.
Menu
MENU[W][NOISE FILTER]
Record mode, white balance, and picture mode
Noise filter
6
69
EN
s0018_e_00_0_unified.book Page 70 Tuesday, March 18, 2008 4:08 PM
7
Flash shooting
Flash mode setting
The camera sets the flash mode according to various factors such as firing pattern and flash
timing. Available flash modes depend on the exposure mode. The flash modes are available
to optional external flashes.
Auto flash AUTO
The flash fires automatically in low light or backlight conditions.
To shoot a subject with backlighting, position the AF target over the subject.
Flash synchronization speed/Slow limit
Shutter speed can be changed when the built-in flash fires. g“#X-SYNC.” (P. 95),
“#SLOW LIMIT” (P. 95)
Red-eye reduction flash !/H
In the red-eye reduction flash mode, a series of
pre-flashes are emitted just before the regular
flash fires. This helps accustom the subject’s
eyes to the bright light and minimizes the redeye phenomenon. In S/M mode, the flash
always fires.
The subject’s eyes appear red
x
7
Notes
• After the pre-flashes, it takes about 1 second before the shutter is released. Hold the camera
firmly to avoid camera shake.
• Effectiveness may be limited if the subject is not looking directly at pre-flashes, or if the
shooting range is too far. Individual physical characteristics may also limit effectiveness.
Flash shooting
Slow synchronization (1st curtain) #SLOW
The slow synchronization flash is designed for slow shutter speeds. Normally, when shooting
with a flash, shutter speeds cannot go below a certain level to prevent camera shake. But
when shooting a subject against a night scene, fast shutter speeds can make the background
too dark. Slow synchronization allows you to capture both the background and the subject.
Since the shutter speed is slow, be sure to stabilize the camera by using a tripod so as not to
cause the picture to be blurred.
1st curtain
Usually, the flash fires right after the shutter fully opens. This is called 1st curtain. This
method is usually used during flash shooting.
70
EN
s0018_e_00_0_unified.book Page 71 Tuesday, March 18, 2008 4:08 PM
Slow synchronization (2nd curtain) #SLOW2/2nd CURTAIN
2nd curtain flash fires just before the shutter closes. Changing the flash timing can create
interesting effects in your picture, such as expressing the movement of a car by showing the
tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out.
In S/M mode, the flash always fires.
When the shutter speed is set to 2 sec.
2 seconds
2nd curtain
2
seconds
1st curtain flash fires
0
1st curtain
seconds
2nd curtain flash fires
Shutter closes
Shutter fully opens
Slow synchronization (1st curtain)/Red-eye reduction flash !SLOW
While using slow synchronization with flash shooting, you can also use this function to
achieve red-eye reduction. When shooting a subject against a night scene, this function
allows you to reduce the red-eye phenomenon. As the time from emitting pre-flashes to
shooting is long in 2nd curtain synchronization, it is difficult to achieve red-eye reduction.
Hence, only 1st curtain synchronization setting is available.
Fill-in flash #
x
Notes
• When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject
against a bright background with the fill-in flash, the background may be overexposed. In this
case, use the optional FL-50R external flash or a similar flash and shoot in the Super FP flash
mode. g“Super FP flash” (P. 76)
7
Flash shooting
The flash fires regardless of the light conditions.
This mode is useful for eliminating shadows on
the subject’s face (such as shadows from tree
leaves), in a backlight situation, or for correcting
the color shift produced by artificial lighting
(especially fluorescent light).
Flash off $
The flash does not fire.
Even in this mode, the flash can be used as an AF illuminator when it is raised.
g“AF ILLUMINAT.” (P. 89)
71
EN
s0018_e_00_0_unified.book Page 72 Tuesday, March 18, 2008 4:08 PM
Manual flash
This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set
the f-number on the lens based on the distance to the subject.
Ratio of amount of light
GN: Guide number
(Equivalent to ISO 100)
FULL (1/1)
12
1/4
6
1/16
3
1/64
1.5
Calculate the f-number on the lens using the following formula.
GN × ISO sensitivity
Aperture (f-number) =
Distance to the subject (m)
ISO sensitivity
ISO value
100
200
400
800
1600
ISO sensitivity
1.0
1.4
2.0
2.8
4.0
Setting method
Direct button
#j
Super control panel
ip: [FLASH MODE]
# button
j
7
Flash shooting
FLASH MODE
AUTO
SLOW
1/4
SELECT
SLOW
1 / 16
SLOW2
FULL
1 / 64
GO
• Not all flash modes may be available depending on the shooting mode. For details refer to
“Flash modes that can be set by shooting mode” (gP. 126).
72
EN
s0018_e_00_0_unified.book Page 73 Tuesday, March 18, 2008 4:08 PM
Built-in flash shooting
If you shoot a subject using a lens that is wider than 14 mm (equivalent to 28 mm on a 35 mm
film camera), the light emitted by the flash may produce a vignette effect. Whether or not
vignetting occurs also depends on lens type and shooting conditions (such as distance to the
subject).
1
Press the # button to raise the built-in
flash.
# button
• The built-in flash will pop up automatically
and fire in low light conditions under the
following modes.
AUTO/i/&///B/U/G/J/r/g
2
Press the shutter button halfway.
3
Press the shutter button all the way.
• The # (flash stand-by) mark lights when the
flash is ready to fire. If the mark is blinking, the
flash is charging. Wait until charging is complete.
Flash stand-by mark
Viewfinder
j Set [AUTO POP UP] to [OFF]. g“AUTO POP UP” (P. 95).
To shoot without having to wait for the flash to finish charging:
j See “RLS PRIORITY S/RLS PRIORITY C” (gP. 93)
x
Notes
Flash shooting
TIPS
When you do not want the flash to pop up automatically:
7
• When [#RC MODE] is set to [ON], the built-in flash will fire only to communicate with the
external flash so it will not function as a flash. g“Shooting with the Olympus wireless RC
flash system” (P. 76)
73
EN
s0018_e_00_0_unified.book Page 74 Tuesday, March 18, 2008 4:08 PM
Flash intensity control
The flash intensity can be adjusted from +3 to -3.
In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may
get better results by adjusting the amount of light emitted by the flash (“flash intensity”). It is
useful when you intend to increase the contrast (distinction between light and dark) of images
to make the images more vivid.
Direct button
# + Fj
j
# button
Super control panel
ip: [w]
Menu
MENU[X][w]
F button
METERING
RC MODE
7
AF MODE
AF AREA
ANTI-SHOCK
x
+3
0
OFF
+2
0.0
+1
0
S-AF
-1
-2
OFF
-3
Notes
Flash shooting
CANCEL
SELECT
GO
• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera’s flash
intensity setting.
• When [w+F] is set to [ON], the flash intensity value will be added to the exposure
compensation value. g“w+F” (P. 95)
Flash bracketing
The camera shoots multiple frames, changing the amount of light emitted by the flash for
each shot. The camera shoots 3 frames at a time with the following amount of light: optimum
light, light adjusted in the – direction, and light adjusted in the + direction.
Menu
74
EN
MENU[X][FL BKT]
• The compensation value will change according to the EV
step. g“EV STEP” (P. 94)
• In single-frame shooting, the amount of light emitted by
the flash changes every time the shutter button is
pressed.
• In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
• Releasing the shutter button stops flash bracketing
shooting. When it stops, 0 is displayed in green on
the super control panel.
AE BKT
WB BKT
FL BKT
CANCEL
SELECT
FL BKT
OFF
3F 0.3EV
3F 0.7EV
3F 1.0EV
GO
s0018_e_00_0_unified.book Page 75 Tuesday, March 18, 2008 4:08 PM
External flash shooting
In addition to the camera’s built-in flash capabilities, you can use any of the external flash
units specified for use with this camera. This enables you to take advantage of a wider variety
of flash shooting techniques to suit different shooting conditions.
The external flashes communicate with the camera, allowing you to control the camera’s
flash modes with various available flash control modes, such as TTL-AUTO and Super FP
flash. An external flash unit specified for use with this camera can be mounted on the camera
by attaching it to the camera’s hot shoe.
Refer to the external flash’s manual as well.
Functions available with external flash units
Optional flash
FL-50R
Flash control mode
GN (Guide number)
(ISO100)
RC mode
FL-50
FL-36R
FL-36
TTL-AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
GN50 (85 mm*)
GN28 (24 mm*)
9
k
GN36 (85 mm*)
GN20 (24 mm*)
9
FL-20
RF-11
TTL-AUTO,
AUTO, MANUAL
TF-22
TTL-AUTO,
MANUAL
GN20 (35 mm*)
GN11
GN22
k
k
k
k
* The focal length of the lens that can be used (Calculated based on 35 mm film camera)
x
Notes
• The FL-40 optional flash cannot be used.
Using the external electronic flash
Be sure to attach the flash to the camera before turning on the flash’s power.
1
Remove the hot shoe cover by sliding it in
the direction indicated by the arrow in the
illustration.
Hot shoe
cover
7
2
Flash shooting
• Keep the shoe cover in a safe place to avoid
losing it, and put it back on the camera after
flash shooting.
Attach the electronic flash to the hot shoe
on the camera.
• If the lock pin is protruding, turn the shoe lock
ring as far as it will go in the direction opposite
to LOCK. This will pull the lock pin back inside.
3
4
5
6
7
Lock pin
Lock ring
Turn on the flash.
• When the charge lamp on the flash lights up, charging
is complete.
• The flash will be synchronized with the camera at a
speed of 1/180 sec. or less.
Select a flash mode.
Select the flash control mode.
• TTL-AUTO is recommended for normal use.
Press the shutter button halfway.
• Shooting information such as ISO sensitivity, aperture
value, and shutter speed is communicated between
the camera and flash.
Press the shutter button all the way.
75
EN
s0018_e_00_0_unified.book Page 76 Tuesday, March 18, 2008 4:08 PM
x
Notes
• The built-in flash cannot be used when an external flash is attached to the hot shoe.
Super FP flash
Super FP flash is available with the FL-50R or FL-36R. Use
the Super FP flash where normal flashes cannot be used
with high shutter speed.
Fill-in flash shooting with the aperture open (such as in
outdoor portrait shooting) is also possible with Super FP
flash. For details, refer to the external flash’s manual.
Super FP flash
FP
2008. 08.16
OFF
arge
Normal
Shooting with the Olympus wireless RC flash system
Wireless flash shooting is possible with the Olympus wireless RC flash system. With this
wireless flash system, you can take pictures using multiple wireless flashes and control the
flashes in three groups (A, B, and C). The built-in flash is used to communicate between the
camera and the external flashes.
For details on using the wireless flash, see the manual of the external flash.
Wireless flash setup range
Position the wireless flash so that the wireless sensor faces the camera. The setup range
guidelines are as shown below. The range changes according to the surrounding
environment.
7
Flash shooting
Remote sensor
Direction of
the camera
Direction of
the emitted
flash
30
30°
60
60°
50
50°
30
30°
10m
100
100°
50
50°
5m
1
2
76
EN
Position the flash while referring to the “Wireless flash setup range”, and turn on
the flash.
Press the MODE button on the flash to set it to RC mode, and set the channel and
group of the flash.
s0018_e_00_0_unified.book Page 77 Tuesday, March 18, 2008 4:08 PM
3
4
Set RC mode on the camera to [ON].
• MENU[X][#RC MODE][ON]
• The super control panel switches to RC mode.
• You can press the INFO button to switch the super control panel display.
Use the super control panel to set the flash mode and other settings for each
group.
Flash intensity value
Group
• Select the flash
control mode and
adjust the flash
intensity individually
for groups A, B, and
C. For MANUAL,
select the flash
intensity.
2008. 08.16
TTL
M
OFF
Normal flash/Super FP flash
• Switch between normal flash and
Super FP flash.
RC
+1.0
1/8
–
LO
2
Flash control Flash
intensity
mode
5
6
7
8
x
Communication light level
• Set the communication light level
to [HI], [MID], or [LO].
Channel
• Set the communication channel to
the same channel used on the
flash.
Select a flash mode.
• Red-eye reduction flash is not possible in RC mode.
Press the # button to raise the built-in flash.
After shooting preparations are completed, take some test shots to check the
flash operation and images.
Begin shooting while checking the charging completed indications of the camera
and flash.
Notes
7
Flash shooting
• Although there is no limit to the number of wireless flashes you can use, it is recommended
that each group have no more than three flashes to prevent flash malfunction due to mutual
interference.
• In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be
used for flash shooting in this mode.
• For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4
seconds. Wireless flash shooting may not operate properly when using a slower shutter
speed or anti-shock setting.
77
EN
s0018_e_00_0_unified.book Page 78 Tuesday, March 18, 2008 4:08 PM
Using commercially available flashes
You cannot use the camera to adjust the amount of light emitted from a commercially
available flash except for a flash specified for use with this camera. To use a commercially
available flash, connect it to the hot shoe. Set the camera’s shooting mode to M.
1
2
3
4
Remove the hot shoe cover to connect the flash unit to the camera.
Set the shooting mode to M, then set the aperture value and shutter speed.
• Set the shutter speed to 1/180 sec. or slower. If the shutter speed is faster than this,
commercially available flashes cannot be used.
• A slower shutter speed may produce blurred images.
Turn on the flash.
• Be sure to turn on the flash after attaching the flash unit to the camera.
Set the ISO sensitivity and aperture value on the camera to match the flash control
mode on the flash.
• Refer to the flash’s manual for instructions on how to set its flash control mode.
x
Notes
• The flash fires each time the shutter is released. When you do not need to use the flash, turn
off the flash’s power.
• Check beforehand that the flash you are using is synchronized with the camera.
Non-specified commercial flashes
7
Flash shooting
78
EN
1) Exposures when using a flash require that adjustments be made on the flash. If a flash is
used in the auto mode, match it with the f-number and ISO sensitivity settings on the
camera.
2) Even if the flash auto f-number and ISO sensitivity are set the same as on the camera, the
correct exposure may not be obtained depending on the shooting conditions. In such a
case, adjust the auto f-number or ISO on the flash or calculate the distance in the manual
mode.
3) Use a flash with an illumination angle that matches the focal length of the lens. The focal
length of the lens for 35 mm film is approximately twice as long as the focal length of the
lenses designed for this camera.
4) Do not use a flash unit or other accessory TTL flash that has additional communication
functions other than the specified flashes, since it may not only fail to function normally,
but may also cause damage to the camera’s circuitry.
s0018_e_00_0_unified.book Page 79 Tuesday, March 18, 2008 4:08 PM
8
Playback functions
Single-frame/Close-up playback
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting. g“REC VIEW” (P. 99)
1
Press the q button (Single-frame playback).
q button
j
< button
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use p to select images you want to view. You can
also turn the dial to switch to U for close-up
playback.
G
INFO button
U
p
(Close-up playback)
(Single-frame playback)
Press p to change the
close-up position.
LN
Press the INFO button
(Close-up position playback)
Press p to move the
display of the close-up
position.
When [g FACE DETECT]
(gP. 39) is set to [ON],
a frame is displayed
around a detected face.
Press i to move the
frame to another face.
Press the < button
• Plays back the image at a
10× magnified close-up
position.
Press the INFO button
(Close-up frame-by-frame playback)
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
15
8
Playback functions
a : Displays the frame that is
stored 10 frames back
c : Displays the frame that is
stored 10 frames ahead
d : Displays the next frame
b : Displays the previous frame
Press bd to view frameby-frame close-ups.
When [g FACE DETECT]
is set to [ON], press ac
to move to another face in
close-up position.
• Press the INFO button
to return to close-up
playback.
79
EN
s0018_e_00_0_unified.book Page 80 Tuesday, March 18, 2008 4:08 PM
Light box display
You can view the playback image and another image together on the left and right sides of
the monitor. This is useful if you want to compare images you recorded using bracketing.
1
2
3
Press the P button during single-frame playback.
MENU button
• The frame being viewed is displayed on the left side of
the monitor, and the next frame is displayed on the right
side. The image is displayed at the same magnification of
the image being viewed.
• The image on the left is the benchmark image.
j
< button
Press p to select the image on the right.
• You can protect, erase or copy the image on the right.
Press the P button.
• The camera returns to single-frame playback of the
image on the left at the magnification being viewed.
INFO button
i button
P button
Benchmark image
8
Playback functions
Operations during light box display
• Pressing the i button replaces the image on the left with the image on the right and
becomes the new benchmark image.
• You can use the control dial to change the magnification of both images at the same time.
• Pressing the < button or INFO button allows you to move the position of the image on the
right with the p button. Pressing the < button or INFO button again allows you to move
the positions of both images with the p button.
p : Selects the right image
p : Scrolls the right image
*
p : Scrolls both images in
synchronization
*
*
* You can also use the INFO button
in the same way for this procedure.
80
EN
s0018_e_00_0_unified.book Page 81 Tuesday, March 18, 2008 4:08 PM
Index display/Calendar display
This function lets you show several images on the monitor at the same time. This is useful
when you want to quickly search a number of pictures to find a particular image.
During single-frame playback, each time you turn the dial
toward G, the number of images shown changes
between 4, 9, 16, 25, 49 and 100 pictures.
b : Moves to the previous frame
d : Moves to the next frame
a : Moves to the upper frame
c : Moves to the lower frame
j
• To return to single-frame playback, turn the control dial to U.
G
U
LN
(Single-frame playback)
(4-frame index display)
(9-frame index display)
(16-frame index display)
2008
8
(100-frame index display)
(49-frame index display)
(25-frame index display)
Calendar display
With the calendar, you can display images recorded on the card by date. If more than one
image was taken on a single date, the image shot first on that date is displayed.
Use p to select a date and press the i button to play back images for the selected date in
single-frame display.
Playback functions
(Calendar display)
81
EN
s0018_e_00_0_unified.book Page 82 Tuesday, March 18, 2008 4:08 PM
Information display
This allows you to display detailed information about the
image.
Luminance information can also be displayed with histogram
and highlight graphs.
Press the INFO button repeatedly until the desired
information is displayed.
• This setting is stored and will be shown the next time the
information display is called up.
Image only
INFO button
Information 1
Information 2
x10
LN
LN
100-0015
15
Displays the frame
number, print reservation,
protect, record mode and
file number
x10
[3648x2736,1/8]
’08.12.16 21:56
100-0015
15
Displays the frame
number, print reservation,
protect, record mode,
number of pixels,
compression rate, date
and time and file number
Shadow/Highlight display
Shooting
information
*Histogram
If the bars in the histogram are
higher on the right, the image may
be too bright. If the bars are higher
on the left, the image may be too
dark. Compensate the exposure or
shoot again.
8
Playback functions
1/250 F5.6
+2.0 45mm
ISO 100
0.0
WB : AUTO A : 0
G: 0
NATURAL
sRGB
LN
Overall
information
Histogram*
x10
LN
x10
LN
SHADOW HILIGHT
Shadow/Highlight display
Under- or overexposed parts of the recorded
image are displayed.
Shadows (underexposed) parts will be shown
in blue.
Highlights (overexposed) parts will be shown
in red.
82
EN
Histogram display
Distribution of the
brightness of the
recorded image is
displayed in a histogram
(brightness component
graph).
s0018_e_00_0_unified.book Page 83 Tuesday, March 18, 2008 4:08 PM
Slideshow
This function displays images stored on the card one after another. Images are displayed one
by one for about 5 seconds starting from the currently displayed image. Slideshow can be
performed using index display. You can select the number of frames displayed during
slideshow from 1, 4, 9, 16, 25, 49 or 100.
1
2
MENU[q][m]
Use p to set.
[K] (1-frame display)/[L] (4-frame display)/[M]
(9-frame display)/[N] (16-frame display)/[O]
(25-frame display)/[h] (49-frame display)/[i]
(100-frame display)
3
4
Press the i button to start the slideshow.
Press the i button to stop the slideshow.
When selecting [L]
x
Notes
• If the slideshow is left running for about 30 minutes, the camera will turn off automatically.
Rotating images
This function lets you rotate images and display them vertically on the monitor during singleframe playback. This is useful when taking pictures with the camera held vertically. The
images will automatically be displayed in the correct direction even if the camera is rotated.
1
MENU[q][y]
F button
• When set to [ON], images shot vertically will be
automatically rotated and displayed during playback. You
can also press the F button to rotate and display the image.
• The rotated image will be recorded on the card in that
position.
8
LN
F
LN
F
LN
F
LN
Playback functions
Original image
before rotating
F
83
EN
s0018_e_00_0_unified.book Page 84 Tuesday, March 18, 2008 4:08 PM
Playback on TV
Use the video cable provided with the camera to play back recorded images on your TV.
1
2
Turn the camera and TV off, and connect
the video cable as illustrated.
Turn on the TV and set it to the video
input mode. For details on switching to
the video input mode, refer to the TV’s
manual.
Turn the camera on and press the q
(playback) button.
3
q button
Video cable
Multi-connector
Video input terminal
x
8
Playback functions
84
EN
Notes
• To connect the camera to a TV, use the provided video cable.
• Make sure that the camera’s video output signal type is the same as the TV’s video signal
type. g“VIDEO OUT” (P. 99)
• The camera’s monitor turns off automatically when the video cable is connected to the
camera.
• The image may appear off-center depending on the TV screen.
Editing still images
Recorded images can be edited and saved as new images. Available editing functions
depend on the image format (image record mode).
A JPEG file can be printed as is without modification. A RAW file, on the other hand cannot
be printed as is. To print a RAW file, use the RAW edit function to convert the RAW data
format to JPEG.
Editing images recorded in RAW data format
The camera performs image processing (such as white balance and sharpness adjustment)
on images in the RAW data format, then saves the data to a new file in the JPEG format.
While checking recorded images, you can edit them to your liking.
Image processing is performed based on the current camera settings. Change the
camera settings to suit your preferences before editing.
s0018_e_00_0_unified.book Page 85 Tuesday, March 18, 2008 4:08 PM
Editing images recorded in JPEG data format
[SHADOW ADJ] Brightens a dark backlit subject.
[REDEYE FIX]
Reduces the red-eye phenomenon during flash shooting.
[P]
Set the trimming size with the control
dial and the trimming position with the
arrow pad.
GO
[BLACK & WHITE] Creates black and white images.
[SEPIA]
Creates sepia-toned images.
[SATURATION]
Sets the color depth. Adjust the color saturation checking the picture on
the screen.
[Q]
Converts the image file size to 1280 × 960, 640 × 480 or 320 × 240.
1
2
3
MENU[q][EDIT]
Use bd to select an image, then press the i
button.
Confirm the data format from here.
• The camera recognizes the image data format.
• For images recorded in RAW+JPEG, a selection screen
will appear, asking you which data to edit.
The setting screen varies with the image data
format. Select the item you want to edit and do
the following steps.
SELECT
JPEG EDIT
RAW DATA EDIT
SHADOW ADJ
REDEYE FIX
YES
GO
8
CANCEL
SELECT
GO
• The edited image is saved as another image, apart from the original image.
• To exit the edit mode, press the MENU button.
x
Notes
• Red-eye correction may not work depending on the image. Red-eye correction may affect
other parts of the image, as well as the eyes.
• Editing of a JPEG image is not possible in the following cases:
When an image is recorded in RAW, when an image is processed on a PC, when there is not
enough space in the card memory, when an image is recorded on another camera
• When resizing ([Q]) an image, you cannot select a larger number of pixels than was
originally recorded.
Playback functions
SELECT
GO
NO
BLACK & WHITE
SEPIA
CANCEL
CANCEL
85
EN
s0018_e_00_0_unified.book Page 86 Tuesday, March 18, 2008 4:08 PM
Copying images
This function lets you copy images to and from the xD-Picture Card and CompactFlash or
Microdrive. This menu can be selected if both cards are inserted. The selected card is the
copying source. g“CF/xD” (P. 98)
Single-frame copy
1
2
Play back the image you want to copy and press the
COPY/< button.
Use ac to select [YES], then press the i button.
COPY/< button
Copying selected frames
This function lets you select multiple images and copy them all at the same time during
single-frame playback or index display.
1
8
2
3
4
Display the images you want to copy and press the
i button.
COPY SELECT
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
Press p to display the next images you want to
copy and press the i button.
After you have selected the images to copy, press
the COPY/< button.
Use ac to select [YES], then press the i
button.
YES
NO
CANCEL
SELECT
GO
Playback functions
Copying all the frames
1
2
3
MENU[q][COPY ALL]
Press d.
Use ac to select [YES], then press the i
button.
COPY ALL
YES
NO
CANCEL
86
EN
SELECT
GO
s0018_e_00_0_unified.book Page 87 Tuesday, March 18, 2008 4:08 PM
Protecting images
Protect images you do not want to erase. Protected images cannot be erased by the singleframe or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
• 9 (protect mark) is displayed on the top right corner of the
screen.
0 button
To cancel the protection
Display the images that are protected and press the 0
button.
i button
Protecting selected frames
This function lets you select multiple images and protect them all at the same time during
single-frame playback or index display.
1
2
3
Display the images you want to protect and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to protect and press the i
button.
Press p to display the next images you want to protect and press the i button.
After you have selected the images to protect, press the 0 button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
MENU[q][RESET PROTECT]
Use ac to select [YES], then press the i button.
x
Notes
• Formatting the card erases all images even if they have been protected.
g“Formatting the card” (P. 121)
• Protected images cannot be rotated even when the F button is pressed.
8
Playback functions
1
2
87
EN
s0018_e_00_0_unified.book Page 88 Tuesday, March 18, 2008 4:08 PM
Erasing images
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x
Notes
• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images. g“RAW+JPEG
ERASE” (P. 97)
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. g“Protecting images” (P. 87)
Single-frame erase
1
2
Play back the image you want to erase and press
the S button.
Use ac to select [YES], then press the i
button.
S button
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1
8
Playback functions
2
3
4
Display the images you want to erase and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to erase and press the i
button.
Press p to display the next images you want to erase and press the i button.
After you have selected the images to erase, press the S button.
Use ac to select [YES], then press the i button.
All-frame erase
1
2
3
MENU[W][CARD SETUP]
Use ac to select [ALL ERASE], then press the i button.
Use ac to select [YES], then press the i button.
• All frames will be erased.
TIPS
To erase immediately:
j If you have set “QUICK ERASE” (gP. 96) to [ON], pressing the S button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 97)
88
EN
s0018_e_00_0_unified.book Page 89 Tuesday, March 18, 2008 4:08 PM
9
Customizing your camera
Use the custom menus to customize the camera for ease of use. Use Custom Menu 1 to
customize the shooting functions and Custom Menu 2 to set the basic camera functions.
Custom Menu 1 has 9 tabs (a to i) that are divided according to the functions to be set.
AF/MF
BUTTON/DIAL
RELEASE/
DISP/8/PC
EXP/e/ISO
#CUSTOM
CANCEL
SELECT
AEL/AFL
A DIAL FUNCTION
A DIAL FUNCTION
B DIAL DIRECTIONS-AF
B DIAL DIRECTION
C AEL/AFL
D AEL/AFL MEMO
S1/C2/M1
OFF
E ; FUNCTION
F
GO
Use ac to select [Y], then
press d.
CANCEL
S1/C2/M1
C-AF
D AEL/AFL MEMO MF OFF
E ; FUNCTION
FUNCTION
SELECT
C AEL/AFL
F
GO
Use ac to select tab a to i,
then press d.
CANCEL
FUNCTION
SELECT
GO
Use ac to select a function,
then press d.
For details on using the menu lists, see “Using the menu” (gP. 29).
Custom Menu 1a AF/MF
AF ILLUMINAT.
The built-in flash can be set to function as an AF illuminator. This makes focusing easier in
low-light conditions using AF mode. To use this function, raise the flash.
FOCUS RING
You can customize how the lens adjusts to the focal point
by selecting the rotational direction of the focus ring.
)
Near
)
Near
RESET LENS
When set to [ON], this resets the focus of the lens (infinity) each time the power is turned off.
You can set the camera to enable focus adjustments during bulb shooting with MF.
[ON]
During exposure, you can turn the focus ring and adjust the focus.
[OFF] The focus is locked during exposure.
LIVE VIEW AF MODE
gP. 37
Custom Menu 1b BUTTON/DIAL
Customizing your camera
BULB FOCUSING
9
DIAL FUNCTION
You can also switch the operation of the control dial to the opposite of factory default settings.
For example, after setting [P] to [F], in P mode you can adjust the exposure compensation
using the control dial and set the program shift using the control dial while holding down the
F button.
89
EN
s0018_e_00_0_unified.book Page 90 Tuesday, March 18, 2008 4:08 PM
Mode
P
A
S
M
Setting
F button + j
j
% (program shift)
Program shift
Exposure compensation
F
Exposure compensation
Program shift
FNo.
Aperture value
Exposure compensation
F
Exposure compensation
Aperture value
SHUTTER
Shutter speed
Exposure compensation
F
Exposure compensation
Shutter speed
SHUTTER
Shutter speed
Aperture value
FNo.
Aperture value
Shutter speed
DIAL DIRECTION
You can select the rotational direction of the control dial and the direction in which the shutter
speed/aperture value will increase or decrease.
Setting
q (rotational direction of the dial)
r (rotational direction of the dial)
DIAL1
• Slower shutter speed
• Open the aperture (f-number is decreased)
• Faster shutter speed
• Close the aperture (f-number is increased)
DIAL2
• Faster shutter speed
• Close the aperture (f-number is increased)
• Slower shutter speed
• Open the aperture (f-number is decreased)
AEL/AFL
You can use the AEL/AFL button to perform AF or metering operations instead of using the
shutter button.
Select the function of the button to match the operation when the shutter button is pressed.
Select [mode1] to [mode4] in each focus mode. (You can only select [mode4] in C-AF
mode.)
AEL/AFL button function
Shutter button function
Mode
Half-press
Focus
Exposure
Full press
Focus
Exposure
When holding down AEL/AFL
Focus
Exposure
[S-AF]
9
Customizing your camera
90
EN
mode1
S-AF
Locked
k
k
k
Locked
mode2
S-AF
k
k
Locked
k
Locked
mode3
k
Locked
k
k
S-AF
k
mode1
C-AF start
Locked
Locked
k
k
Locked
mode2
C-AF start
k
Locked
Locked
k
Locked
mode3
k
Locked
Locked
k
C-AF start
k
mode4
k
k
Locked
Locked
C-AF start
k
mode1
k
Locked
k
k
k
Locked
mode2
k
k
k
Locked
k
Locked
mode3
k
Locked
k
k
S-AF
k
[C-AF]
[MF]
s0018_e_00_0_unified.book Page 91 Tuesday, March 18, 2008 4:08 PM
Basic operations
[mode1] For determining the metered exposure while focusing. AE lock is activated while
pressing the AEL/AFL button, allowing you to adjust the focus and determine
the exposure separately.
[mode2] For determining the exposure when you press the shutter button fully. This is
useful for shooting scenes with significant changes in lighting, such as on a
stage.
[mode3] For focusing with the AEL/AFL button instead of the shutter button.
[mode4] Press the AEL/AFL button to focus, and press the shutter button fully to
determine the exposure.
AEL/AFL MEMO
You can lock and maintain the exposure by pressing the AEL/AFL button.
[ON]
Press the AEL/AFL button to lock and maintain the exposure. Press again to
cancel the maintaining of the exposure.
[OFF] The exposure will be locked only while the AEL/AFL button is pressed.
; FUNCTION
9
Customizing your camera
You can assign a function to the < button.
[Fn FACE DETECT]
Press the < button to set [g FACE DETECT] to [ON] and activate the optimal
settings. Press again to set it to [OFF].
g“Using the face detection function” (P. 39), “g FACE DETECT” (P. 94)
[PREVIEW]/[LIVE PREVIEW] (electronic)
While holding down the < button, you can use the preview function.
g“Preview function” (P. 47)
[V]
Press the < button to acquire the WB value.
g“Setting the one-touch white balance” (P. 66)
[P HOME]
Press the < button to switch to the registered AF home position. Press again to
return to the original position. If you turn off the camera while it is set to the AF home
position, the original position will not be stored.
g“Registering the AF target position” (P. 55)
[MF]
Press the < button to switch AF mode to [MF]. Press the button again to switch to
the original AF mode. If you turn off the camera while it is set to [MF], the original AF
mode will not be stored.
[RAWK]
Press the < button to switch from JPEG to RAW+JPEG or from RAW+JPEG to
JPEG for the record mode.
You can change the record mode by turning the control dial while holding down the
< button.
[TEST PICTURE]
Pressing the shutter button while pressing the < button enables you to check the
picture you have just taken on the monitor without having to record the picture to the
card. This is useful when you want to see how a picture turned out without saving it.
[MY MODE]
While holding down the < button, you can take pictures using the camera settings
registered in the [MY MODE SETUP].
g“MY MODE SETUP” (P. 92)
[OFF]
Does not allow function allocation.
91
EN
s0018_e_00_0_unified.book Page 92 Tuesday, March 18, 2008 4:08 PM
j FUNCTION
Other functions can be assigned to the j/Y/< button.
[j/</Y]
g“Sequential shooting” (P. 57), “Self-timer shooting” (P. 58), “Remote control
shooting” (P. 58)
[AF AREA]
g“AF target selection” (P. 54)
[AF MODE]
g“AF mode selection” (P. 52)
[WB]
g“Selecting the white balance” (P. 64)
[METERING]
g“Changing the metering mode” (P. 47)
[ISO]
g“ISO sensitivity setting” (P. 51)
MY MODE SETUP
You can store two frequently used settings as My Mode. You can select which My Mode
setting to use in advance by following the steps under “Executing” below. To use My Mode,
set [; FUNCTION] to [MY MODE] and hold down the < button while shooting. g“;
FUNCTION” (P. 91)
Registering
1) Select [MY MODE1] or [MY MODE2] and press d.
2) Select [SET] and press the i button.
• The current settings are registered in the camera. For details on the functions that can
be registered to My Mode, refer to “Functions that can be registered with My Mode and
Custom Reset Setting” (gP. 129).
• To cancel the registration, select [RESET].
9
Executing
1) Select [MY MODE1] or [MY MODE2] and press the i button.
2) Select [YES] and press the i button.
• The selected My Mode is set.
• When shooting, press the shutter button while holding down the < button.
BUTTON TIMER
Customizing your camera
The direct button may remain selected even after it is released.
[3SEC]/[5SEC]/[8SEC] The button remains selected during the number of seconds
indicated.
[HOLD]
The button remains selected until you press it again.
• Buttons that can be set with [BUTTON TIMER]
j/Y/<, F, #, WB, AF, ISO, G
A
You can switch the functions of the AEL/AFL button and the < button. When you select
[ON], the AEL/AFL button will function as the < button, and the < button will function as
the AEL/AFL button.
n (arrow pad) LOCK
92
EN
To prevent any unwanted operations, you can lock the arrow pad so that the functions assigned
to the arrow pad buttons are not activated when pressed. g“List of direct buttons” (P. 27)
s0018_e_00_0_unified.book Page 93 Tuesday, March 18, 2008 4:08 PM
Custom Menu 1c RELEASE/j
RLS PRIORITY S/RLS PRIORITY C
Normally, this camera does not release the shutter while the AF is operating or the flash is
charging. If you want to release the shutter without waiting until these operations have
completed, use the setting below. You can set the release priority individually in AF mode.
RLS PRIORITY S Sets release priority for S-AF mode gP. 52.
RLS PRIORITY C Sets release priority for C-AF mode gP. 53.
Custom Menu 1d DISP/8/PC
8
You can turn off the beep sound that is emitted when the focus locks by pressing the shutter
button.
SLEEP
After a specified period of time elapses with no operations being performed, the camera
enters the sleep mode (stand-by) to save battery power. After the super control panel is
displayed for a specified period of time, the backlight turns off. After a specific period of time
has further passed, the camera enters sleep mode. [SLEEP] lets you select sleep timer from
[1MIN], [3MIN], [5MIN], or [10MIN]. [OFF] cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button, q button,
etc.).
BACKLIT LCD (Backlight timer)
To save battery power, after the super control panel is displayed for a specified period of
time, the monitor backlight turns off and the monitor darkens. Select from [8SEC], [30SEC],
or [1MIN] for the time until the backlight turns off. [HOLD] sets the backlight to stay on.
The monitor backlight turns on again as soon as you touch any button (the shutter button,
arrow pad, etc.).
4 h TIMER (Auto power off)
You can set the camera to turn off automatically if not operated for 4 hours. It will not turn off
if this is set to [OFF].
You can connect the camera directly to a computer or printer with the provided USB cable. If
you specify the device you are connecting to beforehand, you can skip the USB connection
setting procedure normally required every time you connect the cable to the camera. For
details on how to connect the camera to either device, refer to “Connecting the camera to a
printer” (gP. 103) and “Connecting the camera to a computer” (gP. 107).
[AUTO]
The selection screen for the USB connection will be displayed every time you connect
the cable to a computer or printer.
[STORAGE]
Allows you to transfer images to a computer. Also, select to use the OLYMPUS
Master software via PC connection.
[MTP]
Allows you to transfer images to a computer running Windows Vista without using the
OLYMPUS Master software.
Customizing your camera
USB MODE
9
93
EN
s0018_e_00_0_unified.book Page 94 Tuesday, March 18, 2008 4:08 PM
[CONTROL]
Allows you to control the camera from a PC using the optional OLYMPUS Studio.
[<EASY]
Can be set when connecting the camera to a PictBridge-compatible printer. Pictures
can be printed directly without using a PC. g“Connecting the camera to a
printer” (P. 103)
[<CUSTOM]
Can be set when connecting the camera to a PictBridge-compatible printer. You can
print out pictures with set number of prints, print paper and other settings.
g“Connecting the camera to a printer” (P. 103)
LIVE VIEW BOOST
During live view shooting, you can brighten the monitor for easier confirmation on the subject.
[OFF]
The subject is displayed on the monitor with the brightness level that is adjusted
according to the exposure being set. You can shoot while confirming through the
monitor in advance to get a picture that is to your liking.
[ON]
The camera automatically adjusts the brightness level and displays the subject on the
monitor for easier confirmation. The effect of the exposure compensation adjustments
will not be reflected on the monitor.
g FACE DETECT
When set to [ON], the camera will detect people’s faces and automatically adjust the focus there.
g“Using the face detection function” (P. 39)
You can play back close-up images focusing on the subject’s face. g“Single-frame/Closeup playback” (P. 79)
FRAME ASSIST (Ruled lines display)
During live view, you can display the ruled lines on the LCD monitor as a guide when
confirming the composition. Press the INFO button repeatedly to display the ruled lines.
g“Switching the information display” (P. 40)
Custom Menu 1e EXP/e/ISO
9
Customizing your camera
94
EN
EV STEP
You can select the EV step for exposure parameter setting, such as shutter speed, aperture
value, or exposure compensation value, from [1/3EV], [1/2EV], or [1EV].
ISO-AUTO SET
You can set the upper limit when ISO is set to [AUTO].
This sets the upper limit of the ISO value that automatically changes. The upper limit can be
set from 100 to 1600.
ISO-AUTO
You can set the shooting mode in which the ISO [AUTO] setting is activated.
[P/A/S]
The [AUTO] setting is activated in all shooting modes except M mode. When [AUTO]
is selected in M mode, ISO 100 is set.
[ALL]
The [AUTO] setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in M mode.
s0018_e_00_0_unified.book Page 95 Tuesday, March 18, 2008 4:08 PM
AELMetering
You can set the metering mode when pressing the AEL/AFL button to lock the exposure.
• [AUTO] performs metering in the mode selected under [METERING].
BULB TIMER
You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1f # CUSTOM
#X-SYNC.
You can set the shutter speed that will be used when the flash fires. The speed can be set
from 1/60 to 1/180 in 1/3 EV increments.
• For details on the synchronization speed of commercially available flashes, refer to their
manuals.
#SLOW LIMIT
You can set the slow limit of the shutter speed that will be used when the flash fires. The
speed can be set from 1/30 to 1/180 in 1/3 EV increments.
w+F
When set to [ON], it will be added to the exposure compensation value and flash intensity
control will be performed.
AUTO POP UP
In AUTO or scene mode, the built-in flash pops up automatically in low light or backlight
conditions. When set to [OFF], the built-in flash will not pop up automatically.
Custom Menu 1g K/COLOR/WB
ALL >
If you select [ALL SET]
1) Use bd to select the color direction.
Toward A: Amber-Blue/Toward G: Green-Magenta
2) Use ac to set the compensation value. g“WB compensation” (P. 65)
Releasing the AEL/AFL button takes a sample image. You can check the white balance
you have adjusted.
If you select [ALL RESET]
1) Use ac to select [YES].
9
Customizing your camera
You can apply the same compensation value to all the white balance modes at once.
[ALL SET]
The same compensation value applies to all WB modes.
[ALL RESET] The WB compensation value settings applied to each WB mode are all
cleared at once.
95
EN
s0018_e_00_0_unified.book Page 96 Tuesday, March 18, 2008 4:08 PM
COLOR SPACE
You can select how colors are reproduced on the monitor or printer. The first character in
image file names indicates the current color space. g“FILE NAME” (P. 97)
Pmdd0000.jpg
P : sRGB
_ : Adobe RGB
[sRGB]
[Adobe RGB]
Standardized color space for Windows.
Color space that can be set with Adobe
Photoshop.
SHADING COMP.
In some cases, the edges of the image may be shadowed due to the properties of the lens.
The shading compensation function compensates by increasing brightness at the dark edge
of the image. This function is especially useful when a wide-angle lens is used.
x
Notes
• This function is not available when a teleconverter or an extension tube is attached to the
camera.
• At higher ISO settings, noise in image edges may be conspicuous.
K SET
You can combine 3 image sizes and 4 compression rates
and register 4 combinations. Select the registered setting
with [K].
g“Selecting the record mode” (P. 62)
Register 4 different
combinations of image settings.
DSET
1
Set the number
of pixels.
2
3
Y SF X F
W N
PIXEL COUNT
CANCEL
SELECT
4
W SF
Yarge
GO
Set the compression rate.
9
Customizing your camera
96
EN
PIXEL COUNT
You can set the pixel size for the image size [X], [W].
[Xiddle] Select [3200 × 2400], [2560 × 1920], or [1600 × 1200].
[Wmall]
Select [1280 × 960], [1024 × 768], or [640 × 480].
Custom Menu 1h RECORD/ERASE
QUICK ERASE
You can erase the picture you have just taken immediately using the S button.
[OFF] When the S button is pressed, the confirmation screen appears, asking you if
you want to erase the picture.
[ON]
Pressing the S button erases the picture immediately.
s0018_e_00_0_unified.book Page 97 Tuesday, March 18, 2008 4:08 PM
RAW+JPEG ERASE
You can select the method to erase images recorded in RAW+JPEG. This function can only
be used to erase one frame.
[JPEG]
Erases all JPEG image files, leaving only the RAW image files.
[RAW]
Erases all RAW image files, leaving only the JPEG image files.
[RAW+JPEG] Erases both image file types.
x
Notes
• This function is effective only if deleting one frame. For all-frame erase or erasing selected
frames, both RAW and JPEG will be erased regardless of this setting.
FILE NAME
When you take a picture, the camera assigns it a unique file name and saves it in a folder.
File names are assigned as shown in the illustration below.
• When both the Folder and File No. reach their respective maximum number (999/9999), it is not
possible to store additional pictures even if the card is not full. No more pictures can be taken.
Replace the card with a new one.
PRIORITY SET
You can customize the initial position of the cursor ([YES] or [NO]) on the Erasing images or
Formatting the card screen.
dpi SETTING
9
Customizing your camera
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one
saved on the previous card, the new card’s file numbers start at the number following
the highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at
0001. If a card containing images is inserted, the file numbers start at the number
following the highest file number on the card.
You can set the resolution for printing images in advance. The set value is recorded on the
card with the images.
[AUTO]
Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press d to display the setting screen.
97
EN
s0018_e_00_0_unified.book Page 98 Tuesday, March 18, 2008 4:08 PM
Custom Menu 1i K UTILITY
gP. 120
CLEANING MODE
CU/HI
You can replace [j] (SPORT) and [/] (NIGHT+PORTRAIT) on the mode dial with [H]
(UNDERWATER MACRO) and [I] (UNDERWATER WIDE).
To use the camera for underwater shooting, use the optional underwater case.
Custom Menu 2
X (Date/time setting)
gP. 15
CF/xD
You can select which card to use when both a CompactFlash and xD-Picture Card are loaded.
EDIT FILENAME
You can rename image files to make them easier to identify and organize.
The portion of the filename that can be changed depends on the color space.
g“COLOR SPACE” (P. 96)
sRGB : Pmdd0000.jpg
AdobeRGB : _mdd0000.jpg
You can change the character to OFF, A - Z
or 0 - 9.
s (Monitor brightness adjustment)
9
Customizing your camera
98
EN
You can adjust the brightness and color temperature of the
monitor. Color temperature adjustment will affect only the
LCD monitor display during playback.
Use bd to switch between k (brightness) and j (color
temperature), and use ac to adjust the value between
[+7] - [-7].
–5 +2
CANCEL
SELECT
GO
W (Changing the display language)
You can change the language used for the on-screen display and error messages from
ENGLISH to another language.
• You can add another language to your camera with the provided OLYMPUS Master
software.
For details, refer to Help in OLYMPUS Master software. g“Using the OLYMPUS Master
software” (P. 106)
s0018_e_00_0_unified.book Page 99 Tuesday, March 18, 2008 4:08 PM
VIDEO OUT
You can select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images
in a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
NTSC
North America, Japan, Taiwan, Korea
PAL
European countries, China
REC VIEW
You can display the picture you have just taken on the monitor while it is being recorded to
the card, and to select how long the picture is displayed. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter button halfway while checking
the picture lets you resume shooting immediately.
[1SEC] – [20SEC] Selects the number of seconds to display each picture. Can be set in
units of 1 second.
[OFF]
The picture being recorded to the card is not displayed.
[AUTOq]
Displays the image being recorded, and then switches to playback
mode. This is useful for erasing a picture after checking it.
PIXEL MAPPING
gP. 120
FIRMWARE
Your product’s firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
Press d. Your product’s firmware version will be displayed. Press the i button to return to
the previous screen.
9
Customizing your camera
99
EN
s0018_e_00_0_unified.book Page 100 Tuesday, March 18, 2008 4:08 PM
10
Printing
Print reservation (DPOF)
Print reservation
Print reservation allows you to save printing data (the number of prints and the date/time
information) with the pictures stored on the card.
Pictures set with print reservation can be printed using the following methods.
Printing using a DPOF-compatible photo lab
You can print the pictures using the print reservation data.
Printing using a DPOF-compatible printer
Pictures can be printed directly from a dedicated printer without using a PC. For more
details, refer to the printer’s manual. A PC card adapter may also be necessary.
x
Notes
• DPOF reservations set by another device cannot be changed by this camera. Make changes
using the original device. Moreover, setting new DPOF reservations using this camera will
erase the previous reservations set by another device.
• Not all functions may be available on all printers or at all photo labs.
• RAW data are not printable.
Single-frame reservation
Follow the operation guide to set print reservation for a picture.
1
MENU[q][<]
ON
EDIT
COPY ALL
RESET PROTECT
Operation guide
2
Select [<] and press the i button.
CANCEL
SELECT
GO
PRINT ORDER SETTING
10
Printing
3
CANCEL
SELECT
GO
Press bd to select the frame that you want to set
as print reservation, then press ca to set the
number of prints.
• To set print reservation for several pictures, repeat this
step.
4
100
EN
Press the i button when you have finished.
• The menu screen for single-frame reservation appears.
CANCEL
SELECT
GO
s0018_e_00_0_unified.book Page 101 Tuesday, March 18, 2008 4:08 PM
5
Select the date and time format and press the i
button.
[NO]
The pictures are printed without the date and
time.
[DATE] The pictures are printed with the shooting date.
[TIME] The pictures are printed with the shooting time.
NO
DATE
TIME
6
CANCEL
Select [SET] and press the i button.
SELECT
GO
PRINT ORDER SETTING
SET
CANCEL
CANCEL
SELECT
GO
All-frame reservation
Applies print reservation to all the pictures stored in the card. The number of prints is fixed at 1.
1
2
3
4
MENU[q][<]
Select [U] and press the i button.
Select the date and time format and press the i button.
[NO]
The pictures are printed without the date and time.
[DATE] The pictures are printed with the shooting date.
[TIME] The pictures are printed with the shooting time.
Select [SET] and press the i button.
Resetting the print reservation data
You can reset all print reservation data or just the data for selected pictures.
1
MENU[q][<]
Resetting the print reservation data for all pictures
2
3
Select [<] or [U] and press the i button.
Select [RESET] and press the i button.
PRINT ORDER SETTING
RESET
Printing
PRINT ORDERED
10
KEEP
CANCEL
SELECT
GO
101
EN
s0018_e_00_0_unified.book Page 102 Tuesday, March 18, 2008 4:08 PM
Resetting the print reservation data for a selected picture
2
3
4
5
6
Select [<] and press the i button.
Select [KEEP] and press the i button.
Use bd to select the frame with print reservation data you want to reset, then
press c to set the number of prints to 0.
Press the i button when you have finished.
Select the date and time format and press the i button.
• This setting is applied to all frames with print reservation data.
7
Select [SET] and press the i button.
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible printer with the USB cable, you can
print out recorded pictures directly. To find out if your printer is compatible with PictBridge,
refer to the printer’s manual.
PictBridge
The standard that enables digital cameras and printers made by different manufacturers to
be connected, and also allows pictures to be printed directly from the camera.
STANDARD
All printers that support PictBridge have standard print settings. By selecting [STANDARD]
on the settings screens (gP. 104), you can print pictures according to these settings. For
details on your printer’s standard settings, refer to the printer’s manual or contact the printer
manufacturer.
• The available print modes and settings such as paper size vary with the type of printer.
For details, refer to the printer’s manual.
• For details on printing paper types, ink cassettes, etc., refer to the printer’s manual.
x
10
Printing
102
EN
Notes
• Use a fully charged battery for printing.
• Images recorded in RAW data cannot be printed.
• The camera will not enter sleep mode while it is connected to the USB cable.
s0018_e_00_0_unified.book Page 103 Tuesday, March 18, 2008 4:08 PM
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible printer.
1
Turn the printer on and connect the camera’s multi-connector to the printer’s USB
port with the USB cable.
• For details on how to turn the printer on and the position of the USB port, refer to the printer’s
manual.
USB cable
Multi-connector
2
3
Turn on the camera.
• The selection screen for the USB connection is displayed.
Use p to select [EASY PRINT] or [CUSTOM
PRINT].
If you select [EASY PRINT]
• Go to “Easy printing” (gP. 103)
If you select [CUSTOM PRINT]
• [ONE MOMENT] is displayed and the camera and
printer are connected.
Go to “Custom printing” (gP. 104)
x
USB
STORAGE
MTP
CONTROL
EASY PRINT
CUSTOM PRINT
SELECT
GO
Notes
• If the screen is not displayed after a few minutes, disconnect the USB Cable and start again
from Step 1.
Easy printing
1
• Display the image you want to print on the camera and
connect the camera with a printer using a USB cable.
The screen on the right appears shortly.
10
Press the < (print) button.
• The picture selection screen appears when printing is
completed. To print another picture, use bd to select
the image and press the < button.
• To exit, unplug the USB cable from the camera while the
picture selection screen is displayed.
Printing
2
Use bd to display the pictures you want to print on the camera.
EASY PRINT START
PC / CUSTOM PRINT
103
EN
s0018_e_00_0_unified.book Page 104 Tuesday, March 18, 2008 4:08 PM
Custom printing
1
Follow the operation guide to set a print option.
Selecting the print mode
PRINT MODE SELECT
PRINT
Select the type of printing (print mode). The available print
ALL PRINT
modes are as shown below.
MULTI PRINT
[PRINT]
Prints selected pictures.
[ALL PRINT]
Prints all the pictures stored in the
ALL INDEX
card and makes one print for each
PRINT ORDER
picture.
EXIT
SELECT
GO
[MULTI PRINT]
Prints multiple copies of one image in
separate frames on a single sheet.
Follow
the
operation
guide
displayed
[ALL INDEX]
Prints an index of all the pictures
here.
stored in the card.
[PRINT ORDER] Prints according to the print
reservation you made. If there is no picture with print reservation, this is not
available. (gP. 100)
Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is available,
you cannot change the setting.
[SIZE]
Sets the paper size that the printer
PRINTPAPER
supports.
[BORDERLESS] Selects whether the picture is printed on
SIZE
BORDERLESS
the entire page or inside a blank frame.
STANDARD
CANCEL
[PICS/SHEET]
Selects the number of pictures per
sheet. Displayed when you have
selected [MULTI PRINT].
Printing
104
EN
SELECT
GO
PRINTPAPER
SIZE
PICS/SHEET
STANDARD
16
CANCEL
10
STANDARD
SELECT
GO
Selecting pictures you want to print
Select pictures you want to print. The selected pictures can be printed later (single-frame
reservation) or the picture you are displaying can be printed right away.
[PRINT] (f)
Prints the currently displayed
picture. If there is a picture that
[SINGLE PRINT] reservation has
already been applied to, only that
reserved picture will be printed.
[SINGLE PRINT] (t) Applies print reservation to the
currently displayed picture. If you
want to apply reservation to other
PRINT
SELECT
pictures after applying [SINGLE
SINGLEPRINT
MORE
PRINT], use bd to select them.
[MORE] (u)
Sets the number of prints and
other items for the currently displayed picture, and whether or not to
print it. For operation, refer to “Setting printing data” (gP. 105) in the
next section.
s0018_e_00_0_unified.book Page 105 Tuesday, March 18, 2008 4:08 PM
Setting printing data
Select whether to print printing data such as the date and time or file name on the picture when
printing.
[<×]
Sets the number of prints.
PRINT INFO
[DATE]
Prints the date and time recorded on the
picture.
1
[FILE NAME] Prints the file name recorded on the picture.
DATE
WITHOUT
[P]
Trims the picture for printing. Set the
FILE NAME
WITHOUT
trimming size with the control dial and the
trimming position with the arrow pad.
2
SELECT
SET
GO
Once you have set the pictures for printing and
printing data, select [PRINT], then press the i button.
[PRINT]
[CANCEL]
Transfers images you print to the printer.
Resets the settings. All print reservation
data will be lost. If you want to keep the
print reservation data and make other
settings, press b. This returns you to the
previous setting.
PRINT
PRINT
CANCEL
CANCEL
SELECT
GO
• To stop and cancel printing, press the i button.
[CONTINUE] Continues printing.
[CANCEL]
Cancels printing. All print reservation data
will be lost.
PRINT
CONTINUE
CANCEL
SELECT
GO
10
Printing
105
EN
s0018_e_00_0_unified.book Page 106 Tuesday, March 18, 2008 4:08 PM
11
Using the OLYMPUS Master software
Flowchart
Just connect the camera to a computer with the USB cable and you can easily transfer
images stored on the card to the computer with the provided OLYMPUS Master software.
Things to prepare
• OLYMPUS Master 2 CD-ROM
• USB cable
• Computer that fulfills the operating
environment
(For the required operating environment,
refer to the OLYMPUS Master installation
guide.)
Installing OLYMPUS Master
(Refer to the installation guide included with the OLYMPUS Master)
Using the OLYMPUS Master software
11
Connecting the camera with your computer using the provided USB cable
(gP. 107)
Starting OLYMPUS Master
(gP. 108)
Saving pictures to your computer
(gP. 108)
Disconnecting the camera from your computer
(gP. 108)
Using the provided OLYMPUS Master software
What is OLYMPUS Master?
OLYMPUS Master is an image management program with viewing and editing features for
pictures taken with your digital camera. Once installed on your computer, you can take
advantage of the following.
z Transferring images from the camera or
removable media to your computer
z Viewing images
You can also enjoy slideshows and sound
playback.
z Grouping and organizing images
You can organize images into albums or
folders. Transferred images are automatically
organized by shooting date, allowing you to
quickly find the particular images you want.
z Correcting images using filter and
correction functions
z Editing images
You can rotate, trim or change the image size.
z A variety of printing formats
You can easily make prints of your pictures.
z Updating the camera firmware
z Developing RAW images
For information about OLYMPUS Master’s other features, as well as for details on how to use the
software, refer to “Help” in OLYMPUS Master software.
106
EN
s0018_e_00_0_unified.book Page 107 Tuesday, March 18, 2008 4:08 PM
Connecting the camera to a computer
Connect the camera to your computer with the provided USB cable.
1
Use the provided USB cable to connect the computer’s USB port to the camera’s
multi-connector.
• The location of the USB port varies with the computer. For details, refer to your computer’s
manual.
Look for this
mark.
Terminal
USB port
2
USB cable
Set the camera’s power switch to ON.
• The selection screen for the USB connection is
displayed.
Press ac to select [STORAGE]. Press the i
button.
The computer recognizes the camera as a new
device.
Smaller terminal
USB
STORAGE
MTP
CONTROL
EASY PRINT
CUSTOM PRINT
Windows
SELECT
GO
• When you connect the camera to the computer for the
first time, the computer automatically recognizes the camera. Click “OK” when the message
saying that the installation is completed appears.
The computer recognizes the camera as a “Removable Disk
”.
Macintosh
• iPhoto is the default image management application for Mac OS. When you connect your
Olympus digital camera for the first time, iPhoto will start up automatically. Close iPhoto and
start OLYMPUS Master.
x
Notes
• When the camera is connected to the computer, none of the camera buttons are functional.
Using the OLYMPUS Master software
3
4
Multi-connector
11
107
EN
s0018_e_00_0_unified.book Page 108 Tuesday, March 18, 2008 4:08 PM
Start up the OLYMPUS Master software
Windows
1
Double-click the “OLYMPUS Master 2” icon
on the desktop.
Macintosh
1
Double-click the “OLYMPUS Master 2” icon
folder.
in the “OLYMPUS Master 2”
• The browse window is displayed.
• When OLYMPUS Master is started up for the first time after installation, the OLYMPUS
Master initial setting screen and user registration screen are displayed before the browse
window. Follow the on-screen instructions.
To exit OLYMPUS Master
1
Click “Exit”
on any window.
• OLYMPUS Master is exited.
Displaying camera images on a computer
Downloading and saving images
1
Using the OLYMPUS Master software
11
108
EN
Click “Transfer Images”
then click “From Camera”
on the browse window, and
.
• The window for selecting the pictures you want to transfer from
the camera is displayed. All the images in the camera are
displayed.
2
3
Select “New Album” and enter an album name.
Select the image files and click “Transfer Images”.
• A window indicating that the download is complete is displayed.
4
Click “Browse images now”.
• The downloaded images are displayed in the browse window.
Disconnecting the camera from your computer
1
Make sure that the card access lamp has stopped
blinking.
Card access lamp
s0018_e_00_0_unified.book Page 109 Tuesday, March 18, 2008 4:08 PM
2
Prepare to remove the USB cable.
Windows
1) In the system tray, click the “Unplug or Eject Hardware”
icon
.
2) Click on the pop-up message.
3) Click “OK” on the “Safe to Remove Hardware” window.
Macintosh
1) The trash icon changes to the eject icon when the
“Untitled” or “NO_NAME” icon on the desktop is
dragged. Drag and drop it on the eject icon.
3
Unplug the USB cable from the camera.
x
Notes
Viewing still images
1
2
Click the “Album” tab on the browse window and select
the album that you want to view.
• The selected album image is displayed in the thumbnail area.
Double-click the still picture thumbnail that you want to
view.
• OLYMPUS Master switches to the image edit window and the
picture is enlarged.
• Click “Back”
to return to the browse window.
Thumbnail
Using the OLYMPUS Master software
• For Windows users:
When you click “Unplug or Eject Hardware”, a warning message may be displayed. In such
case, make sure that no image data is being downloaded from the camera, and that there are
no applications open that were accessing the camera image files. Close any such
applications and click “Unplug or Eject Hardware” again and then remove the cable.
11
109
EN
s0018_e_00_0_unified.book Page 110 Tuesday, March 18, 2008 4:08 PM
To increase the number of languages
Please take care that your battery is fully charged!
1
2
3
Make sure that your computer is connected to the Internet.
Plug the USB cable into the USB port on the computer.
Plug the other end of the USB cable into the camera’s multi-connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is displayed.
4
5
Select [STORAGE] and press the i button.
In the browse window, select “Camera”, then “Update Camera/Add Display
Language”.
• The confirmation window for updating is displayed.
6
Click “OK”.
• The updating the camera window is displayed.
7
Click “Add Language” in the updating
camera display.
• The “Add Display Language of Camera” window
is displayed.
Using the OLYMPUS Master software
11
8
9
Click
and select a language.
Click “Add”.
• The new language is downloaded to your camera.
Please do not remove any cable or the battery while the
camera is processing.
10 After the download procedure the camera display
will show “OK”. You can remove the cables and
turn power off. After restarting the camera you will be able to choose the new
language from [W].
Transferring images to your computer without using
OLYMPUS Master
Your camera supports the USB Mass Storage Class. You can transfer images to a computer
by connecting the camera to the computer with the provided USB cable. This can be done
even without using OLYMPUS Master. The following operating systems are compatible with
the USB connection:
Windows : 2000 Professional/XP Home Edition/XP Professional/Vista
Macintosh : Mac OS X v10.3 or later
x
110
EN
Notes
• If your computer is running Windows Vista, select [MTP] in Step 3 on page 107 to use
Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed OS and home-built computers
s0018_e_00_0_unified.book Page 111 Tuesday, March 18, 2008 4:08 PM
12
Shooting tips and maintenance
Shooting tips and information
Tips before you start taking pictures
The camera does not turn on even when a battery is loaded
The battery is not fully charged
• Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
• Battery performance declines in low temperatures, and the charge may not be sufficient to turn on
the camera. Remove the battery and warm it by putting it in your pocket for a while.
No picture is taken when the shutter button is pressed
The camera has turned off automatically
• To save battery power, if there is no operation, the camera goes into sleep mode after a fixed
period of time and the camera stops operating. The camera activates again when you touch the
shutter button or any other button. The camera will turn off automatically if there is no further
operation for 4 hours. The camera will not work until it is turned back on. g“SLEEP” (P. 93), “4 h
TIMER (Auto power off)” (P. 93)
The flash is charging
• When the flash is raised, the # symbol blinking in the super control panel or the viewfinder
indicates that the flash is charging. Wait for the blinking to stop, then press the shutter button.
Unable to focus
• When the AF confirmation mark in the viewfinder is blinking, it indicates that the camera is unable
to focus using AF. Press the shutter button again.
Noise reduction is activated
The date and time has not been set
The camera is used with the settings at the time of purchase
• The date and time of the camera is not set when purchased. Set the date and time before using
the camera. g“Setting the date/time” (P. 15)
The battery has been removed from the camera
• The date and time settings will be returned to the factory default settings if the camera is left
without the battery for approximately 1 day. The settings will be canceled more quickly if the
battery was only loaded in the camera for a short time before being removed. Before taking
important pictures, check that the date and time settings are correct.
Shooting tips
Shooting tips and maintenance
• When shooting night scenes, shutter speeds are slower and noise tends to appear in images. The
camera activates the noise-reduction process after shooting at slow shutter speeds. During which,
shooting is not allowed. You can set [NOISE REDUCT.] to [OFF].
g“Noise reduction” (P. 69)
12
Focusing on the subject
There are several ways to focus, depending on the subject.
AF target is not focused on the subject
• Use focus lock to focus the AF target on the subject. g“Focus lock k If correct focus cannot be
obtained” (P. 56)
111
EN
s0018_e_00_0_unified.book Page 112 Tuesday, March 18, 2008 4:08 PM
Other things instead of the subject are in focus on the respective AF targets
• Set [AF AREA] to R and focus on the center of the image. g“AF target selection” (P. 54)
The subject is moving quickly
• Focus the camera on a point roughly the same distance away as the subject you want to shoot (by
pressing the shutter button halfway), and then recompose your picture and wait for the subject to
enter the frame.
Close up on the subject using macro lens
• When using macro lens to close up on the subject, it is difficult to focus with AF when the
enlargement ratio of the subject is bigger. Set to manual focus (MF), rotate the focus ring and
focus manually. g“MF (manual focus)” (P. 53)
Taking pictures in low light conditions
• The built-in flash can be set to function as an AF illuminator. The flash helps to focus in low-light
conditions in the AF mode when raised. g“Built-in flash shooting” (P. 73), “AF
ILLUMINAT.” (P. 89)
Subjects that are difficult to focus on
It may be difficult to focus with auto focus in the following situations.
AF confirmation mark is
blinking.
These subjects are not
focused.
Subject with low contrast
Excessively bright light
in center of frame
Subject with
repeated patterns
Subjects at different
distances
Fast-moving subject
Subject not inside
AF area
AF confirmation mark
lights up but the subject
is not focused.
Shooting tips and maintenance
12
In any situation, focus on something with high contrast that is at the same distance as the
subject, determine the composition and shoot the picture.
Taking pictures without blurring
There are several factors that can cause the picture to blur.
The subject is too dark
• Change the shutter speed to match the brightness of the subject. If the shutter speed is set low to
shoot a dark subject, blurring is likely to occur if the subject moves. In addition, when the flash is
turned off in g (Scene mode), the shutter speed becomes slower.
Mount the camera on a tripod. Using the remote control (optional) to close the shutter is also
effective for reducing blurring.
There are also ways to shoot with [q] (DIS MODE) under g (Scene mode). As the ISO
sensitivity increases automatically, you can hand hold the camera and take pictures in low light
situations with the flash off.
The camera or your hand moves when pressing the shutter button
• Press the shutter button gently or hold the camera securely with both hands.
• Use the image stabilizer function. g“Image stabilizer” (P. 60)
• You can avoid camera movement while pressing the shutter button by using self-timer or antishock. g“Self-timer shooting” (P. 58), “Anti-shock” (P. 60)
Taking pictures with less flash
112
EN
When using auto flash, the flash will light up automatically when it is not bright enough and
camera blur is more likely to occur. If the subject is too far away, the flash may have no effect.
Here is how to take pictures without the flash in this type of situation.
s0018_e_00_0_unified.book Page 113 Tuesday, March 18, 2008 4:08 PM
Set the image stabilizer function
• This function reduces camera shake, enabling you to hold the camera and take pictures in low light
situations with the flash off. g“Image stabilizer” (P. 60)
Set g (Scene mode) to [q] (DIS MODE)
• As the ISO sensitivity increases automatically, you can hand hold the camera and take pictures in
low light situations with the flash off.
Increase the ISO setting
• Increase the value of the ISO setting. The image may become grainy. g“ISO sensitivity
setting” (P. 51)
The picture is too grainy
Increasing the ISO sensitivity
• When you increase the ISO setting, noise, which appears as spots of unwanted color or
unevenness in the color, can be introduced and give the picture a grainy appearance. This camera
is equipped with a function to allow shooting at high sensitivity while suppressing noise; however,
increasing the ISO sensitivity creates grainier pictures than when using a lower sensitivity.
g“ISO sensitivity setting” (P. 51)
Image taken appears whitish
This may occur when the picture is taken in backlight or semi-backlight conditions. This is
due to a phenomenon called flare or ghosting. As far as possible, consider a composition
where strong light source is not taken in the picture. Flare may occur even when a light
source is not present in the picture. Use a lens hood to shade the lens from the light source.
If a lens hood does not have effect, use your hand to shade the lens from the light.
g“Interchangeable lenses” (P. 122)
Taking pictures with the correct color
• When the subject is in the shade on a sunny day
• When the subject is illuminated by both natural light and indoor lighting, such as when near a
window
• When there is no white in the frame
g“Selecting the white balance” (P. 64)
Taking pictures of a white beach or snow scene
In normal cases, white subjects such as snow will appear darker than usual when the picture
is taken. There are several ways to capture the whiteness.
• Adjust the exposure compensation toward [+]. g“Exposure compensation” (P. 48)
• Use [g] (BEACH & SNOW) in g (Scene mode) to take the picture. It is most suitable for
taking pictures of the sea in a sunny day or snow-capped mountains. g“Mode dial” (P. 4)
• Use [nHI] (Spot metering highlight control).
Press the shutter button halfway at the center of the viewfinder where you wish to highlight the
whiteness. The metered part at the center will be set to appear whiter. g“Changing the metering
mode” (P. 47)
• Use the AE bracketing function to take the picture.
If you do not know the amount of exposure compensation, try using AE bracketing. The
compensation value changes a little every time you press the shutter button. If you set a larger
exposure compensation, you can change the compensation value either upwards or downwards
based on that value and shoot the picture. g“AE bracketing” (P. 50)
Shooting tips and maintenance
The reason why there are differences between the colors in a picture and the actual colors
taken and the actual color is the light source illuminating the subject. [WB] is the function that
allows the camera to determine the correct colors. Normally, the [AUTO] setting provides the
optimal white balance, but depending on the subject, it may be better to experiment with
changing the [WB] setting.
12
113
EN
s0018_e_00_0_unified.book Page 114 Tuesday, March 18, 2008 4:08 PM
Taking pictures of a subject against backlight
If the background is too bright compared to the subject, the exposure will be affected at the
bright parts and the subject will appear darker. This is because the camera determines the
exposure from the brightness of the whole screen.
• Set [METERING] to [n] (spot metering) to measure the exposure of the subject in the center of
the picture. To change the composition, place the subject in the center of the picture. While holding
down the AEL/AFL button, change the composition and press the shutter button. g“Changing
the metering mode” (P. 47)
• Activate the flash, set the flash mode to [#] (fill-in flash) and shoot the picture. You can shoot a
subject against backlight without the face of the subject appearing dark. [#] (fill-in flash) is used
for shooting against backlight and under fluorescent and other artificial lighting. g“Flash mode
setting” (P. 70)
Image turns out too bright or too dark
When taking pictures in S mode or A mode, the displayed shutter speed or aperture setting
may blink. A blinking display means that the correct exposure cannot be obtained. If you take
the picture as is, the picture will appear too bright or too dark. If that happens, change the
aperture setting or shutter speed.
g“Aperture priority shooting” (P. 44), “Shutter priority shooting” (P. 44), “Exposure warning
display” (P. 125)
Unknown bright dot(s) appear on the subject in the picture taken
This may be due to stuck pixel(s) on the image pickup device. Perform [PIXEL MAPPING]. If
the problem persists, repeat pixel mapping a few times. g“Pixel mapping k Checking the
image processing functions” (P. 120)
Additional shooting tips and information
Increasing the number of pictures that can be taken
Shooting tips and maintenance
12
114
EN
The captured image will be recorded on the card. The following ways describe how to record
more images.
• Change the record mode.
The size of an image varies with the record mode. When you are not sure of the available card
capacity, change the image mode and shoot the picture. The smaller the image size and the
higher the compression, the smaller the size of the image becomes. To make the file size small,
combine the image size and compression rate and register it with [K SET].
You can further reduce the number of pixels by setting [PIXEL COUNT] to fewer pixels for image
size [X] or [W]. g“Selecting the record mode” (P. 62), “K SET” (P. 96), “PIXEL
COUNT” (P. 96)
• Use a card with large capacity.
The number of recordable images varies with the capacity of the card. Use a card with large
capacity.
Using a new card
If you use a non-Olympus card or a card used for another application, such as for a
computer, the message [CARD ERROR] is displayed. To use this card with this camera, use
the [FORMAT] function to format the card. g“Formatting the card” (P. 121)
s0018_e_00_0_unified.book Page 115 Tuesday, March 18, 2008 4:08 PM
Extending the useful life of the battery
Performing any of the following operations when not actually taking pictures can deplete the
battery power.
• Repeatedly pressing the shutter button halfway
• Repeatedly playing back the captured images over a long period of time
• Using the live view function over a long period
To save battery power, turn off the camera whenever it is not in use.
Functions that cannot be selected from menus
Some items may not be selectable from the menus when using the arrow pad.
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
Combination of [j] and [NOISE REDUCT.], etc.
Cannot use the Imager AF
Imager AF is available only when using compatible lenses. For the latest information about
Olympus lenses compatible with Imager AF, visit the Olympus website.
Selecting the optimal record mode
Record modes are divided into 2 main types: RAW and JPEG. RAW records without
reflecting the settings for white balance, contrast, etc. on the images themselves. JPEG
records as images that reflect these settings. JPEG also compresses images to reduce the
file size when recording them. For JPEG, you can register four combinations of images sizes
(Y, X, W) and compression rates (SF, F, N, B) from the 12 total combinations available. The
higher the compression rate, the grainier the image will appear when enlarged during display.
A rough guide for selection is shown below.
To make fine-adjustments of the shooting settings on the computer
• [RAW]
To print large images on A3/A4 paper/To edit and process images on a computer
To print postcard-size images
• Images size X and compression rate SF, F, N, or B
To send as an e-mail attachment or post on a web site
• Images size W and compression rate SF, F, N, or B
g“Record mode and file size/number of storable still pictures” (P. 128)
To restore functions to their settings at the time of purchase
• The settings are saved even when the power is switched off.
• To return to the factory default settings, set [RESET] under [CUSTOM RESET] (even so,
the settings of some functions, like the [CONTRAST] settings, will be saved nonetheless).
You can register up to two types of settings to be reset. Set various functions of the camera
and register using [RESET1] or [RESET2] under [CUSTOM RESET]. g“Resetting to the
factory default settings” (P. 30)
Shooting tips and maintenance
• Images size Y and compression rate SF, F, N, or B
12
115
EN
s0018_e_00_0_unified.book Page 116 Tuesday, March 18, 2008 4:08 PM
Confirming the exposure when it is difficult to view the monitor outdoors
The monitor may be difficult to view and the exposure difficult to confirm when shooting
outdoors.
During live view, press the INFO button repeatedly to display the histogram.
The following shows you how to read the histogram display easily.
How to read the histogram
1 If the graph has many peaks around here, the image will appear
mostly black.
2 If the graph has many peaks around here, the image will appear
mostly white.
3 The part indicated in green in the histogram shows the luminance
distribution within the spot metering area.
g“Switching the information display” (P. 40)
1
2
3
Leaving set functions in the camera so that they can be used later
You can register up to two current camera settings in [MY MODE SETUP]. To shoot using
My Mode settings, [; FUNCTION] must be set to [MY MODE]. After setting, shoot while
pressing the < button.
g“; FUNCTION” (P. 91), “MY MODE SETUP” (P. 92)
Playback tips
Understanding the settings and other information of pictures taken
Play back a picture, and press the INFO button. Press the button repeatedly to change the
amount of information displayed. g“Information display” (P. 82)
Viewing pictures on a computer
Viewing the entire picture on a computer screen
Shooting tips and maintenance
12
116
EN
The size of the picture displayed on a computer screen changes depending on the computer
settings. When the monitor setting is 1024 × 768 and you are using Internet Explorer to view
a picture with an image size of 2048 × 1536 at 100%, the entire picture cannot be viewed
without scrolling. There are several ways you can view the entire picture on the computer
screen.
View the picture using image browsing software
• Install the OLYMPUS Master software from the provided CD-ROM.
Change the monitor setting
• The icons on the computer desktop may be rearranged. For details of changing the settings on
your computer, refer to the computer’s manual.
To view recorded images in RAW
Install the OLYMPUS Master software from the provided CD-ROM. You can use the RAW
development function in OLYMPUS Master to develop the RAW image in the camera setting
used during shooting, as well as change detailed settings such as white balance and
contrast.
s0018_e_00_0_unified.book Page 117 Tuesday, March 18, 2008 4:08 PM
Error codes
Viewfinder
indications
Monitor indication
Normal indication
NO CARD
Possible cause
Insert a card or insert
a different card.
There is a problem
with the card.
Insert the card again.
If the problem persists,
format the card. If the
card cannot be
formatted, it cannot be
used.
Writing to the card is
prohibited.
The card has been set
to read-only setting
with the computer.
Reset the card with
the computer.
The card is full. No
more pictures can be
taken or no more
information such as
print reservation can
be recorded.
Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
There is no space in
the card and print
reservation or new
images cannot be
recorded.
Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
xD-Picture Cards
cannot be read or is
not formatted.
• Select [xD CARD
CLEAN], press the
i button and turn
off the camera.
Remove the card
and wipe dry the
metallic surface with
a soft, dry cloth.
• Select [FORMAT]
[YES], and then
press the i button
to format the card.
Formatting the card
erases all data on
the card.
There are no pictures
on the card.
The card contains no
pictures.
Record pictures and
play back.
WRITE PROTECT
CARD FULL
CARD SETUP
No indication
Clean the terminal of the
xD card with the dry cloth.
xD CARD CLEAN
FORMAT
SELECT
GO
No indication
NO PICTURE
Shooting tips and maintenance
The card is not
inserted, or it cannot
be recognized.
CARD ERROR
No indication
Corrective action
12
117
EN
s0018_e_00_0_unified.book Page 118 Tuesday, March 18, 2008 4:08 PM
Viewfinder
indications
Monitor indication
No indication
PICTURE ERROR
No indication
No indication
THE IMAGE CANNOT
BE EDITED
Internal camera
temperature is too
high. Please wait for
cooling before camera
use.
Possible cause
Corrective action
The selected picture
cannot be displayed
for playback due to a
problem with this
picture. Or the picture
cannot be used for
playback on this
camera.
Use image processing
software to view the
picture on a PC.
If that cannot be done,
the image file is
damaged.
Pictures taken with
another camera
cannot be edited on
this camera.
Use image processing
software to edit the
picture.
Extended use of live
view or sequential
shooting has
increased the internal
temperature of the
camera.
Wait a moment for the
camera to turn off
automatically. Allow
the internal
temperature of the
camera to cool before
resuming operations.
The card cover is
open.
Close the card cover.
The battery is drained.
Charge the battery.
The camera is not
connected to the
computer or printer
correctly.
Disconnect the
camera and connect it
again correctly.
There is no paper in
the printer.
Load some paper in
the printer.
The printer has run out
of ink.
Replace the ink
cartridge in the printer.
The paper is jammed.
Remove the jammed
paper.
CARD-COVER OPEN
No indication
BATTERY EMPTY
Shooting tips and maintenance
12
No indication
NO CONNECTION
No indication
NO PAPER
No indication
NO INK
No indication
JAMMED
118
EN
s0018_e_00_0_unified.book Page 119 Tuesday, March 18, 2008 4:08 PM
Viewfinder
indications
Monitor indication
Possible cause
Corrective action
SETTINGS
CHANGED
The printer’s paper
cassette has been
removed or the printer
has been manipulated
while making settings
on the camera.
Do not manipulate the
printer while making
settings on the
camera.
There is a problem
with the printer and/or
camera.
Turn off camera and
printer. Check the
printer and remedy
any problems before
turning the power on
again.
Pictures recorded on
other cameras may
not be printed on this
camera.
Use a personal
computer to print.
No indication
No indication
PRINT ERROR
No indication
CANNOT PRINT
Camera maintenance
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
• Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and
wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used
the camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor and viewfinder:
Lens, mirror and focusing screen:
• Blow dust off the lens, mirror and focusing screen with a commercially available blower. For the
lens, wipe gently with a lens cleaning paper.
Storage
• When not using the camera for a prolonged period, remove the battery and card. Store the
camera in a cool, dry place that is well ventilated.
• Insert the battery periodically and test the camera’s functions.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on the image
pickup device and to remove any dust or dirt from the image pickup device surface with
ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and
when starting and stopping live view. The dust reduction function operates at the same time
as the pixel mapping, which checks the image pickup device and image processing circuitry.
Since dust reduction is activated every time the camera’s power is turned on, the camera
should be held upright for the dust reduction function to be effective. The SSWF indicator
blinks while dust reduction is working. g“SSWF indicator” (P. 14)
Shooting tips and maintenance
• Wipe gently with a soft cloth.
12
119
EN
s0018_e_00_0_unified.book Page 120 Tuesday, March 18, 2008 4:08 PM
x
Notes
• Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.
• Avoid storing the camera in places where chemicals are treated, in order to protect the
camera from corrosion.
• Mold may form on the lens surface if the lens is left dirty.
• Check each part of the camera before use if it has not been used for a long time. Before
taking important pictures, be sure to take a test shot and check that the camera works
properly.
Cleaning mode k Removing dust
If dust or dirt gets on the image pickup device, black dots may appear in the picture. Contact
your Olympus Authorized Service Center to have the image pickup device physically
cleaned. The image pickup device is a precision device and is easily damaged. When
cleaning the image pickup device yourself, be sure to follow the instructions below. If power
runs out during cleaning, the shutter will close, which may cause the shutter curtain and
mirror to break. Keep an eye on the remaining battery power.
1
2
3
4
5
6
Remove the lens from the camera, and set the
power switch to ON.
MENU[Y][i][CLEANING MODE]
Press d, then press the i button.
CLEANING MODE
CU/ HI
• The camera enters the cleaning mode.
Press the shutter button all the way.
• The mirror goes up and the shutter curtain opens.
Clean the image pickup device.
CANCEL
SELECT
• Carefully blow off any dust on the surface of the image
pickup device by using a mechanical blower (commercially available).
GO
Be careful not to catch the mechanical blower in the shutter curtain when turning
the power off to finish cleaning.
• If the camera turns off, the shutter curtain closes, causing the mirror to fall.
Shooting tips and maintenance
12
x
Notes
• Be careful not to let the mechanical blower (commercially available) touch the image pickup
device. If the blower touches the image pickup device, the image pickup device will be
damaged.
• Never put the mechanical blower behind the lens mount. If the power turns off, the shutter
closes, breaking the shutter curtain.
• Do not use anything other than the mechanical blower. If high-pressure gas is sprayed onto
the image pickup device, it will freeze on the image pickup device’s surface, damaging the
image pickup device.
Pixel mapping k Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image pickup device
and image processing functions. After using the monitor or taking continuous shots, wait for
at least one minute before using the pixel mapping function to ensure that it operates
correctly.
1
2
MENU[Z][PIXEL MAPPING]
Press d, then press the i button.
• The [BUSY] bar is displayed when pixel mapping is in progress. When pixel mapping is
finished, the menu is restored.
120
EN
x
Notes
• If you accidentally turn the camera off during pixel mapping, start again from Step 1.
s0018_e_00_0_unified.book Page 121 Tuesday, March 18, 2008 4:08 PM
13
Information
Card basics
Usable cards
“Card” in this manual refers to a recording medium. This camera can use CompactFlash,
Microdrive or xD-Picture Card (optional).
CompactFlash
A CompactFlash is a largecapacity solid state flash
memory card. You can use
commercially available cards.
Microdrive
A Microdrive is a medium that
uses a large-capacity compact
hard disk drive. You can use a
Microdrive that supports
CF+Type II (CompactFlash
extension standard).
xD-Picture Card
An xD-Picture Card is a
recording medium used mainly
in compact cameras.
Precautions when using a Microdrive
A Microdrive is a medium that uses a compact hard disk drive. Because the disk drive
rotates, a Microdrive is not as resistant to vibration or impact as other cards. Special care is
needed when using a Microdrive (especially during recording and playback) to make sure the
camera is not subjected to shock or vibrations. Be sure to read the following precautions
before using a Microdrive.
Also, refer to the manuals provided with your Microdrive.
• Be very careful when putting the camera down during recording. Place it gently on a firm surface.
• Do not use the camera in places subject to vibrations or excessive shock, such as at a
construction site or in a car while driving along a bumpy road.
• Do not take a Microdrive close to areas where it may be exposed to strong magnetism.
• The Microdrive may not function correctly under low air pressure conditions, like in altitudes
of 3,000 m (9,843 ft.) and higher.
x
Notes
• The data in the card will not be erased completely even after formatting the card or deleting
the data. When discarding, destroy the card to prevent leakage of personal information.
Formatting the card
Non-Olympus cards or cards formatted on a computer must be formatted with the camera
before they can be used.
All data stored on the card, including protected images, is erased when the card is formatted.
When formatting a used card, confirm there are no images that you still want to keep on the card.
MENU[W][CARD SETUP]
Use ac to select [FORMAT], then press the i
button.
Use ac to select [YES], then press the i
button.
CARD SETUP
ALL ERASE
j Select the card to be used in [CF/xD]. g“CF/xD” (P. 98)
13
FORMAT
• Formatting is performed.
TIPS
When inserting cards into the two card slots:
Information
1
2
3
CANCEL
SELECT
GO
121
EN
s0018_e_00_0_unified.book Page 122 Tuesday, March 18, 2008 4:08 PM
Battery and charger
z Use the single Olympus lithium-ion battery (BLM-1).
Other batteries cannot be used.
z The camera’s power consumption varies widely with usage and other conditions.
z As the following consume a lot of power even without shooting, the battery will be drained
quickly.
• Performing auto focus repeatedly by pressing the shutter button halfway in shooting
mode.
• Using live view.
• Displaying images on the LCD monitor for a prolonged period.
• When connected to a computer or printer.
z When using a drained battery, the camera may turn off without the low battery warning
being displayed.
z The battery will not be fully charged at the time of purchase. Charge the battery using the
designated charger (BCM-2) before use.
z The normal charging time of the provided rechargeable battery is approximately 5 hours
(estimated).
z Do not use chargers other than the one designated.
Using your charger abroad
z The charger can be used in most home electrical sources within the range of 100 V to
240 V AC (50/60Hz) around the world. However, depending on the country or area you are
in, the AC wall outlet may be shaped differently and the charger may require a plug
adapter to match the wall outlet. For details, ask at your local electrical shop or travel
agent.
z Do not use commercially available travel adaptors as the charger may malfunction.
Interchangeable lenses
Select the lens that you want to shoot with.
Use a specified Four Thirds lens (Four Thirds mount). When a non-specified lens is used,
auto focus and light metering will not function correctly. In some cases, other functions may
not work either.
Four Thirds mount
Developed by Olympus as the lens mount standard for the Four Thirds system. These all-new
interchangeable lenses featuring the Four Thirds mount were developed from the ground up
based on optic engineering exclusively for digital cameras.
ZUIKO DIGITAL interchangeable lens
Information
13
122
EN
Four Thirds system interchangeable lens are designed to withstand rigorous professional
use. The Four Thirds system makes it possible for a fast lens to be compact and lightweight
as well.
Focal length and depth of field of Four Thirds system lenses
When compared to 35-mm cameras, Four Thirds system cameras achieve different effects at
the same focal length and aperture.
s0018_e_00_0_unified.book Page 123 Tuesday, March 18, 2008 4:08 PM
Focal length
At the same focal length of a 35-mm camera, a Four Thirds system camera can achieve a
focal length equivalent to twice that of a 35-mm camera. This enables the design of compact
telephoto lenses. A 14-50 mm Four Thirds system lens, for example, is equivalent to a 28100 mm lens for a 35-mm camera.
• When the image angle of Four Thirds system lens is converted to that of a 35-mm camera,
the perspective is the same as that of a 35-mm camera.
Depth of Field
A Four Thirds system camera can achieve a depth of field equivalent to two times deeper
than that of a 35-mm camera. This enables more light to enter through the aperture. A Four
Thirds system lens with f2.0 brightness, for example, is equivalent to f4.0 when converted to
the aperture of a 35-mm camera.
• You can achieve the same amount of background blur as if you were using a 35-mm
camera.
x
Notes
• When you attach or remove the body cap and lens from the camera, keep the lens mount on
the camera pointed downward. This helps prevent dust and other foreign matter from getting
inside the camera.
• Do not remove the body cap or attach the lens in dusty places.
• Do not point the lens attached to the camera toward the sun. This may cause the camera to
malfunction or even ignite due to the magnifying effect of sunlight focusing through the lens.
• Be careful not to lose the body cap and rear cap.
• Attach the body cap to the camera to prevent dust from getting inside when no lens is
attached.
ZUIKO DIGITAL lens specifications
„ Names of parts
1 Hood mount section
2 Filter mount thread
3 Zoom ring
4 Focus ring
5 Mount index
6 Electrical contacts
7 Front cap
8 Rear cap
9 Lens hood
„ Attaching the hood
„ Storing the hood
Information
13
• Use the hood when shooting a backlit subject.
• The lens hood cannot be attached to the 17.5 - 45 mm lens.
123
EN
s0018_e_00_0_unified.book Page 124 Tuesday, March 18, 2008 4:08 PM
„ Main Specifications
Items
17.5-45 mm
Mount
14-42 mm
40-150 mm
FOUR THIRDS mount
Focal length
17.5 - 45 mm
14 - 42 mm
Max. aperture
f3.5 - 5.6
f3.5 - 5.6
40 - 150 mm
f4 - 5.6
Image angle
63° - 27°
75° - 29°
30° - 8.2°
Lens configuration
7 groups,
7 lenses
8 groups,
10 lenses
9 groups,
12 lenses
Iris control
f3.5 - 22
f3.5 - 22
f4 - 22
0.28 m - )
0.25 m - )
0.9 m - )
Multilayer film coating (partially single layered)
Shooting range
Focus adjustment
AF/MF switching
Weight (excluding hood and cap)
210 g
190 g
220 g
Dimensions
(Max. diameter × overall length)
l71 × 70 mm
l65.5 × 61 mm
l65.5 × 72 mm
Lens hood mount
Filter mount thread diameter
k
Bayonet
52 mm
58 mm
Can be used with the optional EX-25 extension tube under the following conditions.
The focus adjustment when EX-25 is used will be MF.
Lens, focal length
17.5 mm
17.5-45 mm
40-150 mm
Information
13
124
EN
Magnification
( ): Calculated based on 35 mm film
camera
Shooting is not possible since subjects cannot be brought into focus at
this focal length.
28 mm
15.1 cm - 15.9 cm
0.89 - 1.16× (1.78 - 2.32×)
45 mm
18.4 cm - 22.4 cm
0.57 - 0.91× (1.14 - 1.82×)
14 mm
14-42 mm
Shooting range
Shooting is not possible since subjects cannot be brought into focus at
this focal length.
25 mm
13.3 cm
1.02× (2.04×)
42 mm
16.2 cm - 17.3 cm
0.61 - 0.69× (1.22 - 1.38×)
40 mm
19.0 cm - 20.4 cm
0.61 - 0.70× (1.22 - 1.40×)
80 mm
28.0 cm - 40.6 cm
0.32 - 0.48× (0.64 - 0.96×)
150 mm
48.0 cm - 118.8 cm
0.17 - 0.39× (0.34 - 0.78×)
„ Storage Precautions
• Clean the lens after use. Remove dust and dirt on the surface of the lens with a blower
brush or brush. Use commercially available lens cleaning paper to remove the dirt on the
lens. Do not use organic solvents.
• Always cap the lens and store it when it is not used.
• Do not store in an area with insect repellent.
x
Notes on Shooting
• Edges of pictures may be cut off if more than one filter is used or if a thick filter is used.
s0018_e_00_0_unified.book Page 125 Tuesday, March 18, 2008 4:08 PM
Program line diagram (P mode)
In the P mode, the camera is programmed such that the aperture value and shutter speed
are automatically selected according to the subject’s brightness as shown below. The
program line diagram varies with the type of lens mounted.
When using the
14 - 42 mm f3.5 - 5.6
zoom lens
(focal length: 14 mm,
ISO100)
Program shift
Exposure warning display
If the optimum exposure cannot be obtained when pressing the shutter button halfway, the
display will blink in the viewfinder and on the super control panel.
Shooting
mode
P
Status
Action
The subject is too dark.
• Increase the ISO sensitivity.
• Use the flash.
The subject is too bright.
• Decrease the ISO sensitivity.
• Use a commercially available ND
filter (for adjusting the amount of
light).
The subject is underexposed.
• Decrease the aperture value.
• Increase the ISO sensitivity.
The subject is overexposed.
• Increase the aperture value.
• Decrease the ISO sensitivity or use
a commercially available ND filter
(for adjusting the amount of light).
Information
A
Warning display
example (blinking)
13
125
EN
s0018_e_00_0_unified.book Page 126 Tuesday, March 18, 2008 4:08 PM
Shooting
mode
Warning display
example (blinking)
Status
Action
The subject is underexposured. • Set the shutter speed slower.
• Increase the ISO sensitivity.
S
The subject is overexposured. • Set the shutter speed faster.
• Decrease the ISO sensitivity or use
a commercially available ND filter
(for adjusting the amount of light).
* The aperture value at the moment when its indication blinks varies with the lens type and focal length of
the lens.
Flash modes that can be set by shooting mode
Shooting
mode
AUTO
Auto flash
!
Auto flash
(red-eye reduction)
#
Fill-in flash
$
Flash off
A
Slow synchronization
(red-eye reduction)
#
SLOW
Slow synchronization
(1st curtain)
l
#
SLOW2
Slow synchronization
(2nd curtain)
j
#
FULL
Manual flash
(FULL)
#
1/4
Manual flash (1/4)
#
1/16
Manual flash (1/16)
#
1/64
Manual flash (1/64)
#
Fill-in flash
H
Fill-in flash
(red-eye reduction)
$
Flash off
/*2
Information
EN
#
AUTO
!
SLOW
&
126
Flash mode
P
i
13
Super control
panel screen
display
S
M
Conditions
to timing
Conditions to fire
the flash
Shutter
speed
restrictions
1st curtain
Fires automatically in
dark/backlit*1
conditions
1/30 sec. 1/180 sec.
Always fires
60 sec. 1/180 sec.
k
k
k
1st curtain
Fires automatically in
dark/backlit*1
conditions
2nd curtain
60 sec. 1/180 sec.
1st curtain
Always fires
k
k
k
s0018_e_00_0_unified.book Page 127 Tuesday, March 18, 2008 4:08 PM
Shooting
mode
S
M
Super control
panel screen
display
Flash mode
Conditions
to timing
2nd
CURTAIN
Fill-in flash/Slow
synchronization
(2nd curtain)
2nd curtain
#
FULL
Manual flash
(FULL)
#
1/4
Manual flash (1/4)
#
1/16
Manual flash (1/16)
#
1/64
Manual flash (1/64)
Conditions to fire
the flash
Shutter
speed
restrictions
Always fires
60 sec. 1/180 sec.
1st curtain
*1 When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal
flash before emitting light. g“Super FP flash” (P. 76)
*2 AUTO, !, # cannot be set in NIGHT+PORTRAIT mode.
White balance color temperature
The higher the color temperature, the richer
the light in bluish tones and the poorer in
reddish; the lower the color temperature, the
richer the light in reddish tones and the
poorer in bluish. The spectral balance of
different white light sources is rated
numerically by color temperature — concept
of physics expressed using the Kelvin (K)
temperature scale. The color of sunlight and
other natural light sources and the color of a
• The color temperatures for each light source
light bulb and other artificial light sources
indicated in the above scale are approximate.
can be expressed in terms of color
temperature.
It follows, then, that the color temperatures of fluorescent lights make them unsuitable as
artificial light sources. There are gaps in the hues from the color temperatures of fluorescent
light. If these differences in hue are small, they can be calculated with color temperature and
this is called correlated color temperature.
The 4000K, 4500K and 6600K preset settings in this camera are correlated color
temperatures, and should not be considered strictly as color temperatures. Use these
settings for shooting conditions under fluorescent lights.
Information
13
127
EN
s0018_e_00_0_unified.book Page 128 Tuesday, March 18, 2008 4:08 PM
Record mode and file size/number of storable still pictures
The file size in the table is approximate.
Record
mode
Number of pixels
(PIXEL COUNT)
RAW
YSF
YF
YN
YB
XSF
XF
XN
XB
XSF
XF
XN
XB
XSF
XF
XN
XB
WSF
WF
WN
WB
WSF
WF
WN
WB
WSF
WF
WN
WB
x
Information
13
128
EN
3648 × 2736
3200 × 2400
2560 × 1920
1600 × 1200
1280 × 960
1024 × 768
640 × 480
Compression
Loss-less
compression
1/2.7
1/4
1/8
1/12
1/2.7
1/4
1/8
1/12
1/2.7
1/4
1/8
1/12
1/2.7
1/4
1/8
1/12
1/2.7
1/4
1/8
1/12
1/2.7
1/4
1/8
1/12
1/2.7
1/4
1/8
1/12
File format
File size
(MB)
Number of
storable still
pictures (with
1GB xD-Picture
Card)
ORF
Approx. 11
91
JPEG
Approx. 6.8
Approx. 4.7
Approx. 2.2
Approx. 1.5
Approx. 5.3
Approx. 3.7
Approx. 1.7
Approx. 1.1
Approx. 3.6
Approx. 2.2
Approx. 1.1
Approx. 0.7
Approx. 1.3
Approx. 0.8
Approx. 0.5
Approx. 0.3
Approx. 0.8
Approx. 0.5
Approx. 0.3
Approx. 0.2
Approx. 0.5
Approx. 0.4
Approx. 0.2
Approx. 0.1
Approx. 0.2
Approx. 0.2
Approx. 0.1
Approx. 0.1
147
211
460
687
187
267
597
888
280
466
927
1361
799
1163
2284
3198
1230
1776
3366
4920
1881
2665
4920
7107
4569
6396
10661
12793
Notes
• The number of remaining pictures may change according to the subject or factors like
whether print reservations have been made or not. In certain instances, the number of
remaining pictures displayed on the viewfinder or the LCD monitor does not change even
when you take pictures or stored images are erased.
• The actual file size varies according to the subject.
• The maximum number of storable still pictures displayed on the monitor is 9999.
s0018_e_00_0_unified.book Page 129 Tuesday, March 18, 2008 4:08 PM
Functions that can be registered with My Mode and
Custom Reset Setting
Function
Custom
My Mode
reset setting
registration
registration
Function
Custom
My Mode
reset setting
registration
registration
F
9
9
SLEEP
k
Image stabilizer
9
9
BACKLIT LCD
k
9
j/Y/<*
9
9
4 h TIMER
k
k
AF MODE
9
9
USB MODE
k
k
AF AREA
9
9
LIVE VIEW BOOST
9
9
AE BKT
9
9
g FACE DETECT
k
9
WB BKT
9
9
FRAME ASSIST
k
9
FL BKT
9
9
EV STEP
9
9
PICTURE MODE
9
9
ISO-AUTO SET
k
9
GRADATION
9
9
ISO-AUTO
k
9
K
9
9
AELMetering
k
9
9
NOISE REDUCT.
9
9
BULB TIMER
k
9
WB
9
9
#X-SYNC.
9
9
>
9
9
#SLOW LIMIT
9
9
METERING
9
9
w+F
k
9
ISO
9
9
AUTO POP UP
k
9
NOISE FILTER
9
9
ALL >
k
k
Flash mode
9
9
COLOR SPACE
9
9
#RC MODE
9
9
SHADING COMP.
9
9
w
9
9
K SET
k
9
AF ILLUMINAT.
9
9
PIXEL COUNT
k
9
FOCUS RING
k
9
QUICK ERASE
k
9
RESET LENS
k
k
RAW+JPEG ERASE
k
9
BULB FOCUSING
k
k
FILE NAME
k
k
LIVE VIEW AF MODE
9
9
PRIORITY SET
k
k
DIAL FUNCTION
k
9
dpi SETTING
k
k
DIAL DIRECTION
k
9
CLEANING MODE
k
k
AEL/AFL
k
9
CU/XY
k
k
AEL/AFL MEMO
k
9
X
k
k
j FUNCTION
k
9
CF/xD
k
k
k
9
EDIT FILENAME
k
k
k
k
s
k
k
BUTTON TIMER
k
k
W
k
k
A
k
9
VIDEO OUT
k
k
RLS PRIORITY S
9
9
REC VIEW
k
9
RLS PRIORITY C
9
9
PIXEL MAPPING
k
k
8
k
9
FIRMWARE
k
k
9: Can be registered.
* Includes anti-shock.
k: Cannot be registered.
Information
; FUNCTION
MY MODE SETUP
13
129
EN
s0018_e_00_0_unified.book Page 130 Tuesday, March 18, 2008 4:08 PM
Menu directory
Shooting Menu
Tab
Function
CARD SETUP
Setting
ALL ERASE/FORMAT
Ref.
page
P. 88
P. 121
RESET
CUSTOM RESET
RESET1
SET/RESET
RESET2
SET/RESET
P. 30
PICTURE MODE
hVIVID/iNATURAL*/jMUTED/ZPORTRAIT/
MONOTONE/CUSTOM
P. 67
GRADATION
AUTO/NORMAL*/HIGH KEY/LOW KEY
P. 68
K
RAW/YF/YN*/XN/WN/RAW+YF/RAW+YN/RAW+XN/
RAW+WN
A -7 - +7, G -7 - +7
AUTO*
5 5300K
P. 62
A -7 - +7, G -7 - +7
2 7500K
A -7 - +7, G -7 - +7
3 6000K
A -7 - +7, G -7 - +7
1 3000K
A -7 - +7, G -7 - +7
w 4000K
A -7 - +7, G -7 - +7
x 4500K
A -7 - +7, G -7 - +7
y 6600K
A -7 - +7, G -7 - +7
n 5500K
A -7 - +7, G -7 - +7
V
A -7 - +7, G -7 - +7
2000K - 14000K
ISO
CWB
AUTO*/100 - 1600
NOISE REDUCT.
OFF/ON/AUTO*
P. 69
NOISE FILTER
OFF/LOW/STANDARD*/HIGH
P. 69
WB
e*
J
METERING
P. 64
P. 51
ESP + AF/ESP*
5
P. 47
5HI
5SH
Information
13
130
EN
#RC MODE
OFF*/ON
P. 76
w
-3.0 - 0.0* - +3.0
P. 74
AF MODE
S-AF*/C-AF/MF/S-AF+MF/C-AF+MF
P. 52
AF AREA
AUTO*/Q/R/S
P. 54
ANTI-SHOCK z
OFF*/1SEC - 30SEC
P. 60
AE BKT
OFF*/3F 0.3EV/3F 0.7EV/3F 1.0EV
A-B
OFF*/3F 2STEP/3F 4STEP/
3F 6STEP
G-M
P. 50
OFF*/3F 0.3EV/3F 0.7EV/3F 1.0EV
P. 74
WB BKT
FL BKT
* Factory default setting
P. 67
s0018_e_00_0_unified.book Page 131 Tuesday, March 18, 2008 4:08 PM
Playback Menu
Tab
Function
q
Setting
Ref.
page
m
K/L/M/N/O/h/i
P. 83
y
OFF/ON*
RAW DATA EDIT
P. 83
EDIT
JPEG EDIT
SHADOW ADJ/REDEYE FIX/P/
BLACK & WHITE/SEPIA/
SATURATION/Q
P. 84
<
</U
P. 100
COPY ALL
YES/NO
P. 86
RESET PROTECT
YES/NO
P. 87
* Factory default setting
Custom Menu 1
Tab
Function
a
b
AF/MF
AF ILLUMINAT.
FOCUS RING
RESET LENS
BULB FOCUSING
LIVE VIEW AF MODE
BUTTON/DIAL
DIAL FUNCTION
DIAL DIRECTION
AEL/AFL
AEL/AFL MEMO
; FUNCTION
OFF/ON*
b*/c
OFF/ON*
OFF/ON*
AF SENSOR/HYBRID AF/IMAGER AF*
P
A
S
M
DIAL1*/DIAL2
S-AF*
%*/F
FNo.*/F
SHUTTER*/F
SHUTTER/FNo.*
P. 89
P. 90
mode1*/mode2/mode3
mode1/mode2*/mode3/mode4
mode1*/mode2/mode3
C-AF
MF
OFF*/ON
Fn FACE DETECT*/PREVIEW/LIVE PREVIEW/V/
P HOME/MF/RAWK/TEST PICTURE/MY MODE/
OFF
j/</Y*/AF AREA/AF MODE/WB/METERING/ISO
MY MODE1/ MY MODE2
3SEC/5SEC/8SEC*/HOLD
OFF*/ON
OFF*/ON
OFF*/ON
OFF/ON*
Ref.
page
P. 89
P. 89
P. 89
P. 89
P. 89
P. 37
P. 89
P. 90
P. 91
P. 91
P. 92
P. 92
P. 92
P. 92
P. 92
P. 93
P. 93
P. 93
Information
j FUNCTION
MY MODE SETUP
BUTTON TIMER
A
nLOCK
c RELEASE/j
RLS PRIORITY S
RLS PRIORITY C
* Factory default setting
Setting
13
131
EN
s0018_e_00_0_unified.book Page 132 Tuesday, March 18, 2008 4:08 PM
Tab
Function
d
DISP/8/PC
8
SLEEP
BACKLIT LCD
4 h TIMER
Setting
LIVE VIEW BOOST
OFF/ON*
OFF/1MIN*/3MIN/5MIN/10MIN
8SEC*/30SEC/1MIN/HOLD
OFF/4 h*
AUTO*/STORAGE/MTP/CONTROL/<EASY/
<CUSTOM
OFF*/ON
g FACE DETECT
OFF*/ON
OFF*/GRID/GOLDEN SECTION/SCALE
f
FRAME ASSIST
EXP/e/ISO
EV STEP
ISO-AUTO SET
ISO-AUTO
AELMetering
BULB TIMER
# CUSTOM
g
#X-SYNC.
#SLOW LIMIT
w+F
AUTO POP UP
K/COLOR/WB
USB MODE
e
1/3EV*/1/2EV/1EV
100 - 1600 (400*)
P/A/S*/ALL
AUTO*/J/5/5HI/5SH
k
1/60 - 1/180*
1/30 - 1/180 (1/60*)
OFF*/ON
OFF/ON*
ALL >
ALL SET
ALL RESET
COLOR SPACE
SHADING COMP.
K SET
sRGB*/AdobeRGB
OFF*/ON
P-Q
Y/X/W SF/F/N/B
PIXEL COUNT
Xiddle
Wmall
RECORD/ERASE
QUICK ERASE
RAW+JPEG ERASE
FILE NAME
PRIORITY SET
dpi SETTING
i K UTILITY
CLEANING MODE
CU/HI
* Factory default setting
A -7 - +7 G -7 -+7
YES/NO
3200 × 2400/2560 × 1920*/
1600 × 1200
1280 × 960*/1024 × 768/640 × 480
h
Information
13
132
EN
OFF*/ON
JPEG/RAW/RAW+JPEG*
AUTO*/RESET
NO*/YES
AUTO*/CUSTOM
k
DIALCU*/DIALHI
Ref.
page
P. 93
P. 93
P. 93
P. 93
P. 93
P. 93
P. 94
P. 39
P. 94
P. 94
P. 94
P. 94
P. 94
P. 94
P. 95
P. 95
P. 95
P. 95
P. 95
P. 95
P. 95
P. 95
P. 95
P. 96
P. 96
P. 96
P. 96
P. 96
P. 96
P. 97
P. 97
P. 97
P. 97
P. 120
P. 120
P. 98
s0018_e_00_0_unified.book Page 133 Tuesday, March 18, 2008 4:08 PM
Custom Menu 2
Tab
Function
X
CF/xD
EDIT FILENAME
s
Setting
k
CF*/xD
Adobe RGB
OFF*/A-Z/0-9
sRGB
j -7 - +7 k -7 - +7
*1
W
*1
VIDEO OUT
REC VIEW
OFF/AUTOq/1SEC - 20SEC (5SEC*)
PIXEL MAPPING
k
FIRMWARE
k
* Factory default setting
*1
Settings differ depending on the region where the camera is purchased.
Ref.
page
P. 15
P. 98
P. 98
P. 98
P. 98
P. 99
P. 99
P. 120
P. 99
Glossary
Information
A (Aperture Priority) Mode
You set the aperture yourself and the camera automatically varies the shutter speed so that
the picture is taken with the correct exposure.
AE (Automatic Exposure)
The camera’s built-in exposure meter automatically sets the exposure. The 3 AE modes
available on this camera are P mode, in which the camera selects both the aperture and
shutter speed, A mode, in which the user selects the aperture and the camera sets the
shutter speed, and S mode, in which the user selects the shutter speed and the camera sets
the aperture. In M mode, the user selects both the aperture and the shutter speed.
Aperture
The adjustable lens opening which controls the amount of light that enters the camera. The
larger the aperture, the shorter the depth of field and the fuzzier the background. The smaller
the aperture, the greater the depth of field and the sharper the background. Aperture is
measured in f/stops. Larger aperture values indicate smaller apertures, and smaller aperture
values indicate larger apertures.
AUTO mode
Program AE mode (see “P (Program) Mode”). In addition, this mode features automatic flash
pop up when shooting in low-light conditions.
Center weighted averaging metering
A light metering mode or technique that uses an average of the center and periphery of the
image area but is biased toward the information at the center of the image area. This method
is best used when the brightness of the center and periphery of the image area does not vary
greatly. See also digital ESP metering and spot metering.
Color space
A model that describes colors using more than three coordinates. Color spaces such as
sRGB, Adobe RGB are occasionally used for encoding/reproducing colors.
Color temperature
The spectral balance of different white light sources is rated numerically by color temperature
- a concept of theoretical physics that, with incandescent lighting, corresponds roughly to the
absolute lamp filament temperature, expressed on the Kelvin (K) temperature scale. The
higher the color temperature, the richer the light in bluish tones and the poorer in reddish; the
lower the color temperature, the richer the light in reddish tones and the poorer in bluish. You
may encounter difficulties with color reproduction when shooting indoors under fluorescent
lighting, or where sunlight and fluorescent lighting are both present. Your camera is provided
with a white balance adjustment feature that you can use to compensate for the odd effects
of combinations of color you may occasionally see in your pictures.
13
133
EN
s0018_e_00_0_unified.book Page 134 Tuesday, March 18, 2008 4:08 PM
Information
13
134
EN
Compression rate
Compression is a method of reducing file size by abbreviating some contents of data, and
compression rate denotes the amount of compression. The actual effect of the selected
compression rate could vary with the content of the image. The numbers for the compression
rate selected with this camera provide only a general scale for reference and are not precise
measurements.
DCF (Design rule for Camera File system)
A standard for image files by the Japan Electronics and Information Technology Industries
Association (JEITA).
Depth of Field
Depth of Field refers to the distance from the nearest to the furthest point of perceived “sharp”
focus in a picture.
Digital ESP (Electro-Selective Pattern) Light Metering
This determines the exposure by splitting the image into 49 areas and metering and
calculating the light levels in each area.
DPOF (Digital Print Order Format)
This is for saving desired print settings on digital cameras. By entering which images to print
and the number of copies of each, the user can easily have the desired images printed by a
printer or print lab that supports the DPOF format.
Eclipsing (Vignetting)
This refers to when an object obscures part of the field of view so that the whole subject is not
photographed. Vignetting also refers to when the image seen through the viewfinder does not
exactly match the image shot through the objective lens, so the photographed image includes
objects not seen through the viewfinder. In addition, vignetting can occur when an incorrect
lens hood is used, causing shadowing to appear in the corners of the image.
EV (Exposure Value)
A system for measuring exposure. EV0 is when the aperture is at F1 and the shutter speed is
1 second. The EV then increases by 1 each time the aperture increases by one F stop or the
shutter speed increases by one increment. EV can also be used to indicate brightness and
ISO settings.
Exposure
The amount of light used to capture an image. The exposure is determined by the length of
time the shutter is open (shutter speed) and the amount of light that passes through the lens
(aperture).
Image pickup device
This converts light passing through the lens into electrical signals. On this camera, light is
picked up and converted into RGB signals to build a single image.
Imager contrast detection system
Focusing method based on the contrast of the image of the subject captured on the image
pickup device.
ISO
International abbreviation for International Organization for Standardization. The sensitivity
setting used in digital cameras is based on the same ISO standard used for film sensitivity.
The sensitivity is denoted as shown in “ISO 100”. Higher ISO values indicate greater
sensitivity to light, so images can be exposed even in low-light conditions.
JPEG (Joint Photographic Experts Group)
A compression format for color still images. Photographs (images) shot using this camera are
recorded onto the card in JPEG format when the Record mode is set to a setting other than
[RAW]. By downloading these images to a personal computer, users can edit them using
graphics application software or view the images using an Internet web browser.
M (Manual) Mode
The user sets both the aperture and shutter speed.
s0018_e_00_0_unified.book Page 135 Tuesday, March 18, 2008 4:08 PM
Information
NTSC (National Television Systems Committee) / PAL (Phase Alternating Line)
Television formats. NTSC is mainly used in Japan, North America and Korea. PAL is mainly
used in Europe and China.
Number of pixels (PIXEL COUNT)
The number of dots (pixels) used to create an image denotes the image size. For instance,
an image in 640 × 480 pixel count is the same size as the computer screen if the monitor
setting is also 640 × 480. If the monitor setting is 1024 × 768, the image only takes up part of
the screen.
P (Program) Mode
Also called Program AE mode. The camera automatically sets the best shutter speed and
aperture for the shot.
PictBridge
A standard that enables digital cameras and printers made by different manufacturers to be
connected, and also allows pictures to be printed directly from the camera.
Pixels
A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed images
require millions of pixels.
RAW
Refers to raw data, data which has not been enhanced with a camera option like white
balance, sharpness, contrast, etc. This file format is for viewing and processing with our own
software. You may not be able to open or process these files with other graphics software
applications, and these files cannot be selected for DPOF printing. RAW files are assigned an
orf file extension (*.orf).
S (Shutter Priority) Mode
Also called Shutter Priority AE mode. The user selects the shutter speed and the camera
automatically varies the aperture so that the picture is taken with the best exposure.
Single-lens reflex camera
A camera that uses a mirror to reflect the light entering from the shooting lens so the image
can be checked in the viewfinder. There is no difference between the composition to be
captured and the composition viewed on the viewfinder.
Sleep Mode
A mode designed to save battery life. The camera automatically enters the sleep mode if you
do not operate it for a certain time. To get out of the sleep mode, use any button on the
camera (shutter button, menu button, etc.).
Spot metering
The meter reading is taken from a very small area around the center of the subject, defined
by the spot metering area mark in the viewfinder. Spot metering is ideal for use in difficult light
conditions, or when the important element of the picture (subject’s face) is small. Use spot
metering for backlit subjects, or sports and stage performers. See also digital ESP metering
and center weighted averaging metering.
TFT (Thin-Film Transistor) Color Monitor
A color monitor constructed using thin-film technology.
TTL phase-contrast detection system
This is used to measure the distance to the subject. The camera determines if the image is
focused by the detected phase contrast.
TTL (Through-The-Lens) System
To help adjust exposure, a light receptor built into the camera directly measures the light
passing through the lens.
13
135
EN
s0018_e_00_0_unified.book Page 136 Tuesday, March 18, 2008 4:08 PM
Specifications
Camera specifications
„ Product type
Product type
Lens
Lens mount
Equivalent focal length on
a 35 mm film camera
: Single-lens reflex digital camera with interchangeable lens system
: Zuiko Digital, Four Thirds System Lens
: Four Thirds mount
: Approx. twice the focal length of the lens
„ Image pickup device
Product type
No. of total pixels
No. of effective pixels
Screen size
Aspect ratio
:
:
:
:
:
4/3" Live MOS sensor
Approx. 11,800,000 pixels
Approx. 10,000,000 pixels
17.3 mm (H) × 13.0 mm (V) (0.7" × 0.5")
1.33 (4:3)
:
:
:
:
:
:
:
:
:
Eye-level single-lens reflex viewfinder
Approx. 95% (for field of view on recorded images)
Approx. 0.92× (-1 m-1, 50 mm lens, infinity)
Approx. 14 mm (0.6") from the cover glass (-1 m-1)
-3.0 - +1.0 m-1
Quick return half mirror
When PREVIEW registered with the < button
Fixed
Interchangeable
„ Viewfinder
Product type
Field of view
Viewfinder magnification
Eye point
Diopter adjustment range
Optical path fraction
Depth of field
Focusing screen
Eyecup
„ Live view
: Uses Live MOS sensor for shooting
: Field of view of 100%
„ LCD monitor
Product type
Total no. of pixels
: 2.7" TFT color LCD
: Approx. 230,000 dots
„ Shutter
Product type
Shutter
: Computerized focal-plane shutter
: 1/4000 - 60 sec., Bulb shooting
„ Auto focus
Product type
Focusing points
AF luminance range
Selection of focusing point
AF illuminator
Information
„ Exposure control
Metering system
Metering range
13
Shooting modes
136
ISO sensitivity
Exposure compensation
EN
: TTL phase-contrast detection system/Imager contrast detection system
: 3-point multiple AF (left, center, right)
11-point multiple AF: with [IMAGER AF]
: EV 0 - EV 19 (ISO 100 equivalent, at room temperature 20 °C (68 °F),
TTL phase-contrast detection system)
: Auto, Optional
: The built-in flash provides light.
: TTL full-aperture metering system
(1) Digital ESP metering
(2) Center weighted averaging metering
(3) Spot metering (approx. 2% for the viewfinder screen)
: EV 1 - 20 (Digital ESP metering, Center weighted average metering,
Spot metering) (At room temperature, 50 mm f2, ISO 100)
: (1) AUTO : Fully automatic
(2) P
: Program AE (Program shift can be performed)
(3) A
: Aperture priority AE
(4) S
: Shutter priority AE
(5) M
: Manual
: 100 - 1600
: ±5 EV (1/3, 1/2, 1 EV step)
s0018_e_00_0_unified.book Page 137 Tuesday, March 18, 2008 4:08 PM
„ White balance
Product type
Mode setting
: Image pickup device
: Auto, Preset WB (8 settings), Customized WB, One-touch WB
„ Recording
Memory
Recording system
Applicable standards
: CF card (Compatible with Type I and II)
Microdrive (Compatible with FAT 16/32)
xD-Picture Card
: Digital recording, JPEG (in accordance with Design rule for Camera
File system (DCF)), RAW Data
: Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching
III, PictBridge
„ Playback
Playback mode
Information display
: Single-frame playback, Close-up playback, Index display, Image
rotation, Slideshow, Light box display, Calendar display
: Information display, Histogram display
„ Drive
Drive mode
Sequential shooting
Self-timer
Optical remote control
: Single-frame shooting, Sequential shooting, Self-timer, Remote
control
: 3.5 frames/sec. (Max. no. of storable sequential pictures: 8 frames in
RAW)
: Operation time: 12 sec., 2 sec.
: Operation time: 2 sec., 0 sec. (instantaneous shooting)
(RM-1 Remote Control (optional))
„ Flash
Synchronization
Flash control mode
External flash attachment
Wireless flash function
:
:
:
:
Synchronized with the camera at 1/180 sec. or less
TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL
Hot shoe
Compatible with the Olympus wireless RC flash system
„ External connector
USB connector, VIDEO OUT connector (Multi-connector)
„ Power supply
Battery
: Li-ion Battery (BLM-1) ×1
„ Dimensions/weight
Dimensions
Weight
: 136 mm (W) × 91.5 mm (H) × 68 mm (D) (5.4" × 3.6" × 2.7")
(excluding protrusions)
: Approx. 475 g (1.0 Ib.) (without battery)
„ Operating environment
Temperature
Humidity
: 0 °C - 40 °C (32 °F - 104 °F) (operation)/
-20 °C - 60 °C (-4 °F - 140 °F) (storage)
: 30 - 90% (operation)/10 - 90% (storage)
Information
13
137
EN
s0018_e_00_0_unified.book Page 138 Tuesday, March 18, 2008 4:08 PM
Battery/charger specifications
BLM-1 Lithium ion battery
MODEL NO.
Product type
Nominal voltage
Nominal capacity
No. of charge and
discharge times
Ambient temperature
Dimensions
Weight
:
:
:
:
PS-BLM1
Rechargeable Lithium ion battery
DC 7.2 V
1500 mAh
: Approx. 500 times (varies with usage conditions)
: 0°C - 40°C (32°F - 104°F) (charging)
-10°C - 60°C (14°F - 140°F) (operation)
-20°C - 35°C (-4°F - 95°F) (storage)
: Approx. 39 mm (W) × 55 mm (D) × 21.5 mm (H)
(1.5" × 2.2" × 0.8")
: Approx. 75 g (0.2 Ib.) (without protection cap)
BCM-2 Lithium ion charger
MODEL NO.
Rated input
Rated output
Charging time
Ambient temperature
Dimensions
Weight
:
:
:
:
:
PS-BCM2
AC 100 V - 240 V (50/60 Hz)
DC 8.35 V, 400 mA
Approx. 5 hours (room temperature if using BLM-1)
0°C - 40°C (32°F - 104°F) (operation)/
-20°C - 60°C (-4°F - 140°F) (storage)
: Approx. 62 mm (W) × 83 mm (D) × 26 mm (H)
(2.4" × 3.3" × 1.0")
: Approx. 72 g (0.2 Ib.) (without AC cable)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON
THE PART OF THE MANUFACTURER.
Information
13
138
EN
s0018_e_00_0_unified.book Page 139 Tuesday, March 18, 2008 4:08 PM
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
An exclamation mark enclosed in a triangle alerts you to important operating
and maintenance instructions in the documentation provided with the
product.
DANGER
If the product is used without observing the information given under this
symbol, serious injury or death may result.
WARNING
If the product is used without observing the information given under this
symbol, injury or death may result.
CAUTION
If the product is used without observing the information given under this
symbol, minor personal injury, damage to the equipment, or loss of valuable
data may result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE
THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
General Precautions
Read All Instructions — Before you use the product, read all operating instructions. Save all
manuals and documentation for future reference.
Cleaning — Always unplug this product from the wall outlet before cleaning. Use only a damp cloth
for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean
this product.
Attachments — For your safety, and to avoid damaging the product, use only accessories
recommended by Olympus.
Water and Moisture — For precautions on products with weatherproof designs, read the
weatherproofing sections.
Location — To avoid damage to the product, mount the product securely on a stable tripod, stand,
or bracket.
Power Source — Connect this product only to the power source described on the product label.
Foreign Objects — To avoid personal injury, never insert a metal object into the product.
Heat — Never use or store this product near any heat source such as a radiator, heat register, stove,
or any type of equipment or appliance that generates heat, including stereo amplifiers.
Information
13
139
EN
s0018_e_00_0_unified.book Page 140 Tuesday, March 18, 2008 4:08 PM
Product Handling Precautions
WARNING
( Do not use the camera near flammable or explosive gases.
( Do not use the flash and LED on people (infants, small children, etc.) at close range.
• You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the
subject’s eyes could cause a momentary loss of vision.
( Keep young children and infants away from the camera.
• Always use and store the camera out of the reach of young children and infants to prevent the following
dangerous situations which could cause serious injury:
• Becoming entangled in the camera strap, causing strangulation.
• Accidentally swallowing the battery, cards or other small parts.
• Accidentally firing the flash into their own eyes or those of another child.
• Accidentally being injured by the moving parts of the camera.
( Do not look at the sun or strong lights with the camera.
( Do not use or store the camera in dusty or humid places.
( Do not cover the flash with a hand while firing.
CAUTION
( Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it.
• Never remove the batteries with bare hands, which may cause a fire or burn your hands.
( Never hold or operate the camera with wet hands.
( Do not leave the camera in places where it may be subject to extremely high temperatures.
• Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire.
Do not use the charger if it is covered (such as a blanket). This could cause overheating, resulting in fire.
( Handle the camera with care to avoid getting a low-temperature burn.
• When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention
to the following:
• When used for a long period, the camera will get hot. If you hold on to the camera in this state, a lowtemperature burn may be caused.
• In places subject to extremely cold temperatures, the temperature of the camera’s body may be lower
than the environmental temperature. If possible, wear gloves when handling the camera in cold
temperatures.
( Be careful with the strap.
• Be careful with the strap when you carry the camera. It could easily catch on stray objects - and cause
serious damage.
Battery Handling Precautions
Follow these important guidelines to prevent batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or burns.s
DANGER
Information
13
140
EN
• The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger.
Do not use any other chargers.
• Never heat or incinerate batteries.
• Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal
objects such as jewelry, pins, fasteners, etc.
• Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a
hot vehicle, near a heat source, etc.
• To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the
use of batteries. Never attempt to disassemble a battery or modify it in any way, by soldering, etc.
• If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek
medical attention immediately.
• Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek
medical attention immediately.
WARNING
• Keep batteries dry at all times.
• To prevent batteries from leaking, overheating, or causing a fire or explosion, use only batteries
recommended for use with this product.
• Insert the battery carefully as described in the operating instructions.
s0018_e_00_0_unified.book Page 141 Tuesday, March 18, 2008 4:08 PM
• If rechargeable batteries have not been recharged within the specified time, stop charging them and do not
use them.
• Do not use a battery if it is cracked or broken.
• If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during
operation, stop using the camera.
• If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean,
running cold water immediately. If the fluid burns your skin, seek medical attention immediately.
• Never subject batteries to strong shocks or continuous vibration.
CAUTION
• Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other
abnormality.
• The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately
after using the camera.
• Always unload the battery from the camera before storing the camera for a long period.
• This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. For safe
and proper use, read the battery’s instruction manual carefully before using it.
• If the battery’s terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a
dry cloth before use.
• Always charge a battery when using it for the first time, or if it has not been used for a long period.
• When operating the camera with battery power at low temperatures, try to keep the camera and spare
battery as warm as possible. A battery that has run down at low temperatures may be restored after it is
warmed at room temperature.
• The number of pictures you can take may vary depending on the shooting conditions or battery.
• Before going on a long trip, and especially before traveling abroad, purchase extra batteries.
A recommended battery may be difficult to obtain while traveling.
• Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure
to cover their terminals and always observe local laws and regulations.
Caution for Usage Environment
• To protect the high-precision technology contained in this product, never leave the camera in the places
listed below, no matter if in use or storage:
• Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight,
beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers.
• In sandy or dusty environments.
• Near flammable items or explosives.
• In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read
their manuals as well.
• In places prone to strong vibrations.
• Never drop the camera or subject it to severe shocks or vibrations.
• When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist the camera.
• Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, color
failure, ghosting on the image pickup device, or may possibly cause fires.
• Do not touch electric contacts on cameras and interchangeable lenses. Remember to attach the body cap
when removing the lens.
• Before storing the camera for a long period, remove the battery. Select a cool, dry location for storage to
prevent condensation or mold from forming inside the camera. After storage, test the camera by turning it
on and pressing the shutter release button to make sure that it is operating normally.
• Always observe the operating environment restrictions described in the camera’s manual.
LCD Monitor
Information
• Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode
failure or damage to the monitor.
• A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.
• When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This
is not a malfunction; it will be less noticeable in playback mode.
• In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may
change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place
it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures will recover in
normal temperatures.
• The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots
of light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at which you are
viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.
13
141
EN
s0018_e_00_0_unified.book Page 142 Tuesday, March 18, 2008 4:08 PM
Lens
•
•
•
•
•
•
•
Do not immerse in water or splash with water.
Do not drop or exert strong force on the lens.
Do not hold at the moving part of the lens.
Do not touch the lens surface directly.
Do not touch the contact points directly.
Do not subject to abrupt temperature changes.
The operating temperature range is -10 °C - 40 °C (14 °F - 104 °F). Always use within this temperature
range.
Legal and Other Notices
• Olympus makes no representations or warranties regarding any damages, or benefit expected by using this
unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product.
• Olympus makes no representations or warranties regarding any damages or any benefit expected by using
this unit lawfully which are caused by erasing picture data.
Disclaimer of Warranty
• Olympus makes no representations or warranties, either expressed or implied, by or concerning any content
of these written materials or software, and in no event shall be liable for any implied warranty of
merchantability or fitness for any particular purpose or for any consequential, incidental or indirect damages
(including but not limited to damages for loss of business profits, business interruption and loss of business
information) arising from the use or inability to use these written materials or software or equipment. Some
countries do not allow the exclusion or limitation of liability for consequential or incidental damages, so the
above limitations may not apply to you.
• Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of copyrighted material may violate applicable copyright laws.
Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe
upon the rights of copyright owners.
Copyright Notice
All rights reserved. No part of these written materials or this software may be reproduced or used in
any form or by any means, electronic or mechanical, including photocopying and recording or the use
of any type of information storage and retrieval system, without the prior written permission of
Olympus. No liability is assumed with respect to the use of the information contained in these written
materials or software, or for damages resulting from the use of the information contained therein.
Olympus reserves the right to alter the features and contents of this publication or software without
obligation or advance notice.
FCC Notice
Information
13
142
EN
• Radio and Television Interference
Changes or modifications not expressly approved by the manufacturer may void the user’s authority to
operate this equipment. This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Adjust or relocate the receiving antenna.
- Increase the distance between the camera and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB
cable should be used to connect the camera to USB enabled personal computers (PC).
Any unauthorized changes or modifications to this equipment would void the user’s authority to
operate it.
s0018_e_00_0_unified.book Page 143 Tuesday, March 18, 2008 4:08 PM
Use Only Dedicated Rechargeable Battery and Battery Charger
We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery and battery
charger with this camera.
Using a non-genuine rechargeable battery and/or battery charger may result in fire or personal injury due to
leakage, heating, ignition or damage to the battery. Olympus does not assume any liability for accidents or
damage that may result from the use of a battery and/or battery charger that are not genuine Olympus
accessories.
For customers in North and South America
For customers in USA
Declaration of Conformity
Model Number
Trade Name
Responsible Party
Address
: E-520
: OLYMPUS
:
: 3500 Corporate Parkway, P.O. Box 610, Center Valley,
PA 18034-0610, USA
Telephone Number : 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
For customers in Europe
“CE” mark indicates that this product complies with the European requirements for safety,
health, environment and customer protection. “CE” mark cameras are intended for sales in
Europe.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of
waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for the disposal of this
product.
1. If this product proves to be defective, although it has been used properly (in accordance with the written
Handling Care and Operating instructions supplied with it), during a period of two years from the date of
purchase from an authorized Olympus distributor within the business area of Olympus Imaging Europa
GmbH as stipulated on the website: http://www.olympus.com this product will be repaired, or at Olympus’s
option replaced, free of charge. To claim under this warranty the customer must take the product and this
Warranty Certificate before the end of the two year warranty period to the dealer where the product was
purchased or any other Olympus service station within the business area of Olympus Imaging Europa
GmbH as stipulated on the website: http://www.olympus.com. During the one year period of the World
Wide Warranty the customer may turn the product in at any Olympus service station. Please notice that
not in all countries such Olympus service station exists.
2. The customer shall transport the product to the dealer or Olympus authorized service station at his own
risk and shall be responsible for any costs incurred in transporting the product.
Information
Provisions of warranty
13
143
EN
s0018_e_00_0_unified.book Page 144 Tuesday, March 18, 2008 4:08 PM
3. This warranty does not cover the following and the customer will be required to pay repair charge, even for
defects occurring within the warranty period referred to above.
(a) Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in
the Handling Care or other sections of the instructions, etc.)
(b) Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than
Olympus or an Olympus authorized service station.
(c) Any defect or damage that occurs due to transport, a fall, shock, etc. after purchase of the product.
(d) Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural
disasters, environmental pollution and irregular voltage sources.
(e) Any defect that occurs due to careless or improper storage (such as keeping the product under
conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful
drugs, etc.), improper maintenance, etc.
(f) Any defect that occurs due to exhausted batteries, etc.
(g) Any defect that occurs due to sand, mud, etc. entering the inside of the product casing.
(h) When this Warranty Certificate is not returned with the product.
(i) When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and
date of purchase, the customer’s name, the dealer’s name, and the serial number.
(j) When proof of purchase is not presented with this Warranty Certificate.
4. This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment,
such as the case, strap, lens cap and batteries.
5. Olympus’s sole liability under this warranty shall be limited to repairing or replacing the product. Any liability
for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a
defect of the product, and in particular any loss or damage caused to any lenses, films, other equipment
or accessories used with the product or for any loss resulting from a delay in repair or loss of data, is
excluded. Compelling regulations by law remain unaffected by this.
Notes regarding warranty maintenance
1. This warranty will only be valid if the Warranty Certificate is duly completed by Olympus or an authorized
dealer or other documents contain sufficient proof. Therefore, please make sure that your name, the name
of the dealer, the serial number and the year, month and date of purchase are all completed or the original
invoice or the sales receipt (indicating the dealer’s name, the date of purchase and product type) is
attached to this Warranty Certificate. Olympus reserves the right to refuse free-of-charge service if neither
Warranty Certificate is completed nor the above document is attached or if the information contained in it
is incomplete or illegible.
2. Since this Warranty Certificate will not be re-issued, keep it in a safe place.
• Please refer to the list on the web site: http://www.olympus.com for the authorized international Olympus
service network.
Trademarks
•
•
•
•
•
Information
13
144
EN
IBM is a registered trademark of International Business Machines Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Macintosh is a trademark of Apple Inc.
xD-Picture Card™ is a trademark.
“Shadow Adjustment Technology” function contains patented technologies from Apical Limited.
• All other company and product names are registered trademarks and/or trademarks of their respective
owners.
• The standards for camera file systems referred to in this manual are the “Design Rule for Camera File
System/DCF” standards stipulated by the Japan Electronics and Information Technology Industries
Association (JEITA).
s0018_e_00_0_unified.book Page 145 Tuesday, March 18, 2008 4:08 PM
Index
Symbols
A .......................................................... 92
CU/HI ............................................... 98
w+F ........................................................... 95
8 (Beep sound) ........................................... 93
o (Image stabilizer) ..................................... 60
W (Language selection) ........................... 98
# SLOW LIMIT ............................................. 95
# X-SYNC. ................................................... 95
< CUSTOM .................................................. 94
< EASY ........................................................ 94
Y Custom Menu 1 ....................................... 131
Z Custom Menu 2 ....................................... 133
; FUNCTION ............................................. 91
j FUNCTION ............................................. 92
j /</Y ........................................................ 92
P HOME .................................................... 91
n LOCK ..................................................... 92
q Playback Menu ...................................... 131
# RC mode ................................................... 76
K SET ......................................................... 96
W Shooting Menu 1 ..................................... 130
X Shooting Menu 2 ..................................... 130
a AF/MF ....................................................... 89
b BUTTON/DIAL .......................................... 89
c RELEASE/j .......................................... 93
d DISP/8/PC ............................................. 93
e EXP/e/ISO ............................................ 94
f # CUSTOM ............................................. 95
g K/COLOR/WB ....................................... 95
h RECORD/ERASE ..................................... 96
i K UTILITY .............................................. 98
h VIVID ........................................................ 67
i NATURAL ................................................. 67
j MUTED ..................................................... 67
ZPORTRAIT ................................................ 67
4 h TIMER ..................................................... 93
A
Adobe RGB ................................................... 96
AE BKT .......................................................... 50
AE bracketing ................................................ 50
AE lock .......................................................... 49
AEL/AFL ........................................................ 90
AEL/AFL MEMO ............................................ 91
AELMetering .................................................. 95
AF AREA ................................................. 54, 92
AF ILLUMINAT. ............................................. 89
AF MODE ................................................ 52, 92
AF SENSOR .................................................. 37
AF target ........................................................ 54
ALL > ....................................................... 95
ALL ERASE ................................................... 88
ANTI-SHOCK z .......................................... 60
Aperture priority shooting A ......................... 44
Aperture value .............................................. 43
Auto flash AUTO ........................................... 70
Auto focus ............................................. 56, 112
AUTO POP UP ............................................. 95
AUTO shooting AUTO ................................... 4
Auto white balance ................................. 64, 65
B
B (Basic) ............................................... 62, 115
B&W FILTER ................................................ 68
BACKLIT LCD ............................................... 93
Battery .................................................. 11, 122
BEACH&SNOW g ....................................... 5
BLACK & WHITE .......................................... 85
BULB FOCUSING ........................................ 89
Bulb shooting .......................................... 46, 60
BULB TIMER ................................................ 95
BUTTON TIMER ........................................... 92
C
C-AF (continuous AF) ................................... 53
C-AF+MF ...................................................... 53
Calendar display ........................................... 81
CANDLE & .................................................... 5
CARD SETUP ....................................... 88, 121
Cards .................................................... 13, 121
Center weighted averaging metering J ..... 48
CF/xD ............................................................ 98
CHILDREN G ................................................ 5
CLEANING MODE ...................................... 120
Close-up playback U ................................... 79
COLOR SPACE ............................................ 96
Color temperature ....................................... 127
CompactFlash ....................................... 13, 121
Comparison screen ....................................... 41
Compression rate ......................................... 62
Continuous AF (C-AF) .................................. 53
CONTRAST .................................................. 68
CONTROL .................................................... 94
COPY ALL .................................................... 86
Custom printing ........................................... 104
CUSTOM RESET ......................................... 30
Custom white balance CWB ................... 64, 65
D
Date/time setting X .................................... 15
DIAL DIRECTION ......................................... 90
DIAL FUNCTION .......................................... 89
Digital ESP metering e ............................. 47
Diopter adjustment ........................................ 14
Direct buttons ................................................ 27
Direct print .................................................. 102
DIS MODE q ................................................ 5
DOCUMENTS @ ........................................... 5
dpi SETTING ................................................ 97
145
EN
s0018_e_00_0_unified.book Page 146 Tuesday, March 18, 2008 4:08 PM
DPOF .......................................................... 100
Dust reduction ....................................... 14, 119
E
Easy printing ............................................... 103
Easy shooting modes ...................................... 4
EDIT FILENAME ........................................... 98
Enlarged display ............................................ 41
EV STEP ....................................................... 94
Exposure compensation F ........................... 48
Eyepiece cover .............................................. 58
F
F (Fine) .................................................. 62, 115
FACE DETECT g .................................. 39, 94
FILE NAME ................................................... 97
Fill-in flash # ................................................ 71
FIREWORKS ( ............................................. 5
FIRMWARE ................................................... 99
FL BKT .......................................................... 74
Flash bracketing ............................................ 74
Flash intensity control w ............................. 74
Flash mode # ............................................... 70
Flash off $ ................................................... 71
Fn FACE DETECT .................................. 39, 91
Focus lock ..................................................... 56
FOCUS RING ................................................ 89
FORMAT ..................................................... 121
Four Thirds system lenses .......................... 122
FRAME ASSIST ............................................ 94
G
GRADATION ................................................. 68
H
HIGH KEY ..................................................... 68
Histogram ........................................ 40, 82, 116
Home position p ......................................... 55
HYBRID AF o ............................................ 37
I
IMAGE STABILIZER o ................................ 60
IMAGER AF p ........................................... 37
Index display G ........................................... 81
Information display .................................. 40, 82
ISO .......................................................... 51, 92
ISO-AUTO ..................................................... 94
ISO-AUTO SET ............................................. 94
J
JPEG EDIT .................................................... 84
L
146
EN
Y (Large) .............................................. 62, 115
LANDSCAPE L ............................................. 5
LANDSCAPE+PORTRAIT K ......................... 5
Lens ...................................................... 12, 122
Light box display ........................................... 80
Lithium ion battery ................................. 11, 122
Lithium ion charger ................................ 11, 122
LIVE PREVIEW .......................................47, 91
Live view ........................................................36
LIVE VIEW AF MODE ...................................37
LIVE VIEW BOOST .......................................94
LOW KEY ......................................................68
M
X (Middle) .............................................62, 115
MACRO J ......................................................5
Manual flash ..................................................72
Manual focus (MF) ...................................40, 53
Manual shooting M ........................................45
Menu ..............................................................29
METERING ..............................................47, 92
MF .................................................................91
MF (manual focus) .........................................53
Microdrive ..............................................13, 121
Monitor adjustment s .................................98
MONOTONE .................................................67
MTP .......................................................93, 110
My mode ........................................................91
MY MODE SETUP ........................................92
N
N (Normal) .............................................62, 115
NATURE MACRO r .....................................5
NIGHT SCENE G ..........................................5
NIGHT+PORTRAIT U ...................................5
NOISE FILTER ..............................................69
NOISE REDUCT. ..........................................69
NTSC .............................................................99
Number of pixels ............................................62
O
OLYMPUS Master .......................................106
Olympus wireless RC flash system ...............76
One-touch white balance V ............64, 66, 91
P
PAL ................................................................99
PANORAMA s ........................................5, 42
PICT. TONE ..................................................68
PictBridge ....................................................102
PICTURE MODE ...........................................67
Pixel count ...............................................62, 96
PIXEL MAPPING .........................................120
PORTRAIT I .................................................5
Preset white balance ...............................64, 65
Preview ....................................................47, 91
Print mode < ..............................................104
Print reservation ..........................................100
PRIORITY SET ..............................................97
Program shift % ...........................................43
Program shooting P ......................................43
Protecting 0 ...............................................87
Q
QUICK ERASE ..............................................96
s0018_e_00_0_unified.book Page 147 Tuesday, March 18, 2008 4:08 PM
R
U
RAW .............................................................. 62
RAW DATA EDIT .......................................... 84
RAW+JPEG ERASE ..................................... 97
RAWK ........................................................ 91
REC VIEW ..................................................... 99
Record mode K ............................ 62, 63, 128
REDEYE FIX ................................................. 85
Red-eye reduction flash ! ......................... 70
Remote control < ........................................... 58
RESET LENS ................................................ 89
RESET PROTECT ........................................ 87
Resizing Q .................................................. 85
RLS PRIORITY C .......................................... 93
RLS PRIORITY S .......................................... 93
Rotating images y ....................................... 83
UNDERWATER MACRO H ................... 5, 98
UNDERWATER WIDE I ....................... 5, 98
USB MODE ................................................... 93
S
W (Small) ............................................... 62, 115
S-AF (single AF) ............................................ 52
S-AF+MF ....................................................... 53
SATURATION ......................................... 68, 85
Scene mode g ......................................... 4
Self-timer Y .................................................. 58
SEPIA ............................................................ 85
Sequential shooting j ................................ 57
SF (Super Fine) ..................................... 62, 115
SHADING COMP. ......................................... 96
SHADOW ADJ .............................................. 85
SHARPNESS ................................................ 68
Shutter priority shooting S ............................ 44
Shutter speed ................................................ 43
Single AF (S-AF) ........................................... 52
Single-frame copy ......................................... 86
Single-frame erase S ................................... 88
Single-frame playback ................................... 79
Single-frame protect ...................................... 87
Single-frame shooting o ............................. 57
SLEEP ........................................................... 93
Slideshow m ............................................... 83
Slow synchronization #SLOW ..................... 70
Slow synchronization #SLOW2/2nd
CURTAIN ........................................... 71
SPORT J ....................................................... 5
Spot metering 5 .......................................... 48
Spot metering - highlight control 5HI .......... 48
Spot metering - shadow control 5SH ......... 48
sRGB ............................................................. 96
STORAGE ............................................. 93, 107
Strap .............................................................. 10
SUNSET * .................................................... 5
Super control panel ................................... 7, 28
Super FP flash ............................................... 76
V
VIDEO OUT .................................................. 99
Viewfinder ........................................... 6, 14, 16
W
WB .......................................................... 65, 92
WB BKT ........................................................ 67
WB compensation ......................................... 65
White balance bracketing ............................. 67
White balance WB ........................................ 64
X
xD-Picture Card .................................... 13, 121
Z
ZUIKO DIGITAL interchangeable lens ........ 122
T
TEST PICTURE ............................................ 91
Trimming P ................................................. 85
147
EN
s0018_e_oime_00_1_cover_7.fm Page 1 Monday, March 24, 2008 2:42 PM
DIGITAL CAMERA
Basic guide
INSTRUCTION MANUAL
Printed in China
INSTRUCTION
MANUAL
P. 2
Review the camera part names
and the basic steps for shooting
and playback.
Table of Contents P. 20
z Before you start to use your new camera, please read the “Safety Precautions”
section in this manual.
z We recommend that you take test shots to get accustomed to your camera before
taking important photographs.
z The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
z The contents in this manual are based on firmware version 1.0 for this camera. If there
are addition and/or modification of functions due to firmware update for the camera,
the contents will differ. For the latest information, please visit the Olympus website.