Professional Audio
Section
4
NEW!
4
Professional Audio
Amplifiers (70V) . . . 91~96
Amplifiers
(stereo) . . . 62, 70, 78, 83
Applied Research
Technology (ART) 73~75,
110, 114, 115
Astatic . . . . . . . . . . . . 102
Atlas Sound 71, 92,
93, 96, 97, 99, 100, 115
Audio-Technica . . . . . . 76,
105~108
Behringer . . . . 62~66, 104
Bogen . . 91, 92, 95, 97~99
Bud Industries . . 115, 118
CAD . . . . . . . . . . 102~104
CD Players . . . . 67, 83, 85
Crossovers . . . . . . . 65, 82
DI Boxes . . . . . . . . 66, 75
Digital Recording/
Playback . . . . . 71, 76, 77
Equalizers/Processors
64~66, 72~74, 82
Gemini . . . . . . 67, 68, 71
Guitar Amplifiers . . . 81, 82
Horizon Music . . . . . 74, 76
iKey . . . . . . . . . . . . . . 71
Lighting . . . . . . . . . . . 118
MCM Custom Audio . . . 85,
86, 96, 97
Megaphones . . . . . . . . . 85
MG Electronics . . . 85, 96,
100, 101
Mic Stands . . . . . . . . . 113
Back
Microphones/
Accessories . . . . 102~114
Mixers . . . . 63, 64, 68~71,
77, 79, 80, 84, 85
Nady . . . . . . . . . . . . . 111
Penn Elcom . . . . 115, 117
Phantom Power
Supplies 76, 75, 107, 110
Portable PA
Systems . . . . . . . . . 80, 81
Pyle . . 77~85, 95, 96, 112
Pyramid . . . . . . . . . . . . 95
Racks and
Accessories . . . . 114~118
Radio Design Labs
(RDL) . . . . . . . . . . 87~90
RaXXess . . . . . . 114~118
Samson . . . . . . 68~70, 72,
74 108, 109, 110, 114
Shure . . . . . . . . . . . . 111
Speakers
(Ceiling/Wall) . . . . . 96~99
Speakers (DJ/Stage/
monitors) . . 68, 69, 79, 86
Speakers
(PA/Horns) . . . . . 100, 101
Speco Technologies
93~95, 98, 101
TOA . . . . . 91, 98, 100, 101
Transformers (70V) . . . . 99
Tuners . . . . . . . 91~93, 96
Turntables . . . . . . . . . . 76
Volume Controls . . . . . 100
Zoom . . . . . . . . . . . . . . 76
NEW!
Digital Two-Way
Monitor Speakers
These extremely
compact nearfield
monitors feature ultra-high resolution 24 bit/192KHz D/A
converters, allowing you to connect directly to your digital
signal sources and eliminate annoying analog line-loss and
hum forever. Whether you connect to your computer sound
card, keyboard, or mp3 player, you will enjoy exceptional
sound quality with great dynamics. Features: •Digital
optical and coaxial inputs •Analog 3.5mm and RCA inputs
•Individual volume, bass, and treble controls •1⁄4"
headphone output •Magnetic shielding
Order #
Mfr. #
555-10885 MS40
555-10890 MS20
Power
output
2 x 20w
2 x 10w
Frequency
range
50Hz~25KHz
65Hz~25KHz
Two-Way
Monitor Speakers
•Compact stereo speaker
system ideally suited for home studios, multimedia
applications, keyboard and vocal monitoring, and more
•Powerful 4" woofers and high-resolution tweeters
powered by two 8W amplifiers •Dedicated volume,
bass, and treble controls •RCA and 3.5mm inputs
•Frequency range: 80Hz~20KHz •Mfr. #MS16
page
62
Professional Light Weight
Stereo Power Amplifiers
with ATR Technology
•ATR (accelerated transient response) technology for
ultimate punch and clarity •Independent limiters for each
channel offer maximum output level with reliable overload
protection •Gain controls for precise setting and matching
of sensitivity •Precise power, signal and clip LEDs to
monitor performance •XLR, ¼" and RCA inputs •Binding
post and Speakon outputs •Built-in subwoofer/satellite
crossover •Independent DC and thermal overload
protection on each channel •See MCMelectronics.com
for more information
UltraLink Pro Eight
Channel Splitter/Mixer
The UltraLink functions as a
splitter, line mixer or level
conditioner. Regardless of your
application, the MX882 keeps your signal paths short and
clean. Features: •Eight in/two out line mixer, two in/eight
out line splitter •Each channel can operate independently
in mixer or splitter mode •Usable as six in/six out level
matching amplifier or direct inject box •Converts levels
between -10dBV and +4dBu •Extremely wide bandwidth
from 5Hz~200KHz for audio purity •Six mono in, six
mono out, two main inputs and two outputs •Four/eightsegment input/output level meters for all channels
Order #
555-10720
ONLY
$99.99
Stereo output Bridged output
Order #
Mfr. #
(@4ohm)
(@4ohm)
ONLY
555-10900 EPX3000 900W x 2
3000W x 1 $399.00
555-10905 EPX2000 650W x 2
2000W x 1
349.99
NEW!
NEW!
EuroRack Pro 12 Input
Mic/Line Rack Mixer
Professional Stereo
Power Amplifiers
with ATR Technology
•Precise power, signal and clip
LEDs to monitor performance
•XLR and ¼" inputs •Speakon and binding post speaker
outputs •Selectable low frequency filters (30Hz or 50Hz)
•Independent limiters per channel protect against overload
and distortion •Independent DC and thermal overload
protection on each channel •See MCMelectronics.com
for more information.
Stereo output Bridged output
Order #
Mfr. #
(@4ohm)
(@4ohm)
ONLY
555-10910 EP4000 1400W x 2
4000W x 1 $349.99
555-10915 EP2000 750W x 2
2000W x 1 299.99
The EuroRack Pro RX1202FX
12 channel mic/line mixer comes
loaded with a 24 bit multi-FX
processor and eight built-in studio-grade IMP “invisible”
mic preamps. Features: •130dB dynamic range for 24 bit,
192KHz sampling rate inputs •Ultra-wide 60dB gain range
•Integrated 24 bit digital stereo FX processor •Two band
EQ and clip LED on all channels •Four balanced highheadroom line inputs •Two aux sends per channel •CD/
tape inputs assignable to main mix or control room/phones
outputs •Separate control room, phones and stereo CD/tape
outputs •Balanced main mix XLR outputs •Switchable
+48V phantom power for condenser microphones
Order #
555-10715
ONLY
$199.99
NEW!
NEW!
16-Input Ultra
Low-Noise Line Mixer
ONLY
$129.00
99.00
NEW!
Order #
555-10895
NEW!
Make sure every cable in your arsenal is in good working
order with the invaluable CT100 cable tester. Features:
•Three modes: Cable test mode, installed cable test mode
and test tone mode •Accepts XLR, mono and stereo
TRS phone (1⁄4", 1⁄8", TT), RCA and MIDI connectors
•Continuity check •Intermittent detect •Phantom power
detect •Grounded shield detect •Test tone generation
(1KHz and 440Hz) •Operates on two “AA” alkaline
batteries (not included)
The RX1602 is an incredibly
versatile 16-channel line mixer
that works perfectly for monitoring
multi-track recording projects, submixing multiple
keyboards, sub-mixing samplers or mixing a small live
set-up. Features: •Dedicated balance and level controls
plus +4/-10 level selection per channel •Monitor/FX send
control per section with global master send control for
flexible monitoring, recording or effects applications
•Two seven-digit LED level meters and individual level
control for left and right main mix signal •1⁄4' TRS main
mix outputs plus easily headphone with dedicated level
control •Mfr. #RX1602
Order #
555-11030
Order #
555-10710
Microprocessor
Controlled
Cable Tester
ONLY
$29.99
ONLY
$69.00
1-800-543-4330
Fax: 1-800-765-6960
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$129.99
Professional Audio
NEW!
Five Channel
Digital DJ Mixer
EuroDesk Analog Mixing Consoles
Order #
555-11055
ONLY
$399.00
4
NEW!
These premium ultra-low noise, high-headroom analog
mixers include 16 or 24 state-of-the-art XENYX Mic
preamps and two independent studio-grade 24 bit stereo
FX processors with 99 presets. Features: •Neo-classic
“British” 3-band EQs •Four bus outputs and additional
#555-10700
mono output with sweepable low pass filter for subwoofer
•Nine band stereo graphic EQ •Peak LEDs, mute, main mix and
subgroup routing switches, solo and PFL functions on all channels
•Standby switch mutes all channels during breaks while background
music is provided via CD/tape inputs •Two stereo input channels with
4-band EQ plus two additional stereo input channels with level and
pre-fader aux controls •Inserts on each mono channel and main
mix for connection of outboard equipment •Balanced main
mix outputs with 1⁄4" jack and gold-plated XLR connectors,
#555-10705
separate control room, headphone and stereo tape outputs
Order #
555-10700
555-10705
Channels
32
24
Mfr. #
SX3242FX
SX2442FX
4
The DDM4000 is a
state-of-the-art 32
bit digital DJ mixer
jam-packed with
creative tools, yet
its intuitive layout
will let you feel at
home in an instant. Editing, storing and recalling your
settings is simply a breeze! Features: Beat-synchronized
sampler •Four multi-FX sections •Two BPM counters
•Digital crossfader and MIDI •Four phono/line stereo
channels allowing up to eight signal sources to be
connected simultaneously •Dedicated headphone section
•Digital S/PDIF output •Rack mount brackets included
•See MCMelectronics.com for more information
Section
ONLY
$599.99
499.99
#555-10815
#555-10805
#555-10810
#555-10820
NEW!
EuroPower Powered Mixers
Certain events call for a lightweight, easy-to-use powered mixer. Behringer powered mixers are the most efficient,
affordable mixers for the job. With so many incredible built-in features, it’s easier than ever to lend exceptional
sound quality to all kinds of public performances. See MCMelectronics.com for more details.
Total
Stereo Mono/mix
Mic
Order #
Mfr. #
inputs
inputs
buses
preamps
Channel EQ
555-10805 PMP5000
20
12/4
4
12
3 band with parametric midrange
555-10810 Pmp3000
16
8/4
3
8
3 band 555-10820 PMP1280S 10
6/2
2
8
3 band 555-10815 PMP2000
11
6/4
2
9
3 band 555-10825 PMP1000
16
6/4
3
6
3 band 555-10800 PMP518M
5
5 mono
1
5
2 band
Effects
int/ext
1/3
1/3
2/1
1/1
1/1
1 int
Channel power
output
2 x 600W
Metering ONLY
12 LED $549.99
2 x 600W
2 x 600W
2 x 350W
2 x 250W
1 x 180W
12 LED
5 LED
5 LED
12 LED
5 LED
449.99
399.99
349.00
349.99
199.99
#555-10825
#555-10800
#555-10780
XENYX Series Mic/Line Mixers
NEW!
#555-10730
Featuring the same sonic characteristics of the mega-console desks of the 60s and 70s that
made music history, along with the new XENYX mic preamp that matches the sound quality,
transparency, headroom and even the dynamic range of boutique-style, stand-alone mic
preamps, the XENYX analog mixer series offers a tremendous amount of capabilities.
See MCMelectronics.com for detailed specs.
Total Mono/Stereo Mix
Mic
Channel
Order #
Mfr. # Inputs input channels Buses Preamps
EQ
555-10730 2442FX
24
8/4
4/2
10
3 band
555-10735 2222FX
22
8/4
2/2
8
3 band
555-10740 1832FX
18
6/4
3/2
6
3 band
555-10745 1622FX
16
4/4
2/2
4
3 band
555-10750 1222FX
12
4/4
2/2
4
3 band
555-10765 1202FX
12
4/4
2/2
4
3 band
555-10775 1002FX
10
2/4
2/2
2
3 band
555-10755 1204FX
8
4/2
2/2
4
3 band
555-10760 1204
8
4/2
2/2
4
3 band
555-10770 1202
12
4/4
2/2
4
3 band
555-10780 1002
10
2/4
2
2
3 band
555-10785* 1002B
10
2/4
2
2
3 band
555-10790 802
8
2/2
2
2
3 band
555-10795 502
5
1/2
2
1
2 band
*Can be powered by two 9V batteries (three if phantom power is used)
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Channel
Effects
Int/ext
2/2
1/3
2/1
1/1
1/1
1
1
1/1
0/2
1
1
2
1
-
Effects
Returns USB
4 stereo Yes
3 stereo Yes
2 stereo Yes
2 stereo Yes
2 stereo Yes
1 stereo -
1 stereo -
2 stereo Yes
2 stereo Yes
2 stereo -
-
-
-
-
1 stereo -
-
-
FX
presets 100
100
100
100
100
100
100
100
-
-
-
-
-
-
Metering
ONLY
12 LED $349.00
12 LED
299.99
12 LED
279.99
12 LED
219.99
12 LED
219.99
4 LED
99.99
4 LED
89.99
8 LED
179.99
12 LED
129.99
4 LED
79.99
4 LED
69.99
5 LED
99.99
4 LED
59.99
4 LED
44.99
MCMelectronics.com
Email: quotes@MCMelectronics.com
#555-10795
page
63
Section
4
Professional Audio
These loudspeakers pack a clean, punchy sound. They are easy
to lift by their recessed handles (24 lbs.) and are priced to fit any
budget. Features: •Deliver excellent sound even at extreme sound
pressure levels •Extremely powerful long-excursion driver provides
incredibly deep bass and acoustic power •State-of-the-art 1.75'' titanium-diaphragm
compression driver •Ultra-wide dispersion, large-format exponential horn •Overloadprotection circuitry •13⁄8" pole mountable •Can be used as a floor monitor •Swiveling
wall-mount brackets (sold separately) Inputs: Two speakon 1⁄4'' jacks
Back
EuroLive Powered
600 Watt PA Speaker
4Digital processor
4Integrated mixer
4
NEW!
EuroLive Two-Way PA Speakers
NEW!
These high-power 600W two-way PA
sound reinforcement speaker systems feature an integrated
mixer. Features: •Two mic/line inputs with individual
volume controls and peak LEDs •Extremely powerful
long-excursion driver provides incredibly deep bass and
acoustic power •State-of-the-art 1.75" titanium-diaphragm
compression driver for exceptional high-frequency
reproduction •Ultra-wide dispersion and large format
exponential/conical horn with multi-cell aperture throat
•Line output enables linking of additional speaker systems
•13⁄8" pole mountable •Can be used as a floor monitor
•Ergonomically shaped handles
Frequency
Order #
Mfr. #
Size
555-10835 B415DSP 15"
555-10830 B412DSP 12"
Back
Order #
Mfr. #
Color
Size
Speakers
555-10851
B215XL-WH
White
15"
555-10850
B215XL
Black
15"
555-10861
B212XL-WH
White
12"
555-10860
B212XL
Black
12"
Wall Brackets
555-11071
WB215-WH
White
15"
555-11070
WB215
Black
15"
555-11076
WB212-WH
White
12"
555-11075
WB212
Black
12"
Power Capacity
(rms/peak)
Frequency
Range
250W/1000W
250W/1000W
200W/800W
200W/800W
55Hz~20KHz
55Hz~20KHz
65Hz~18KHz
65Hz~18KHz
-
-
-
-
-
-
-
-
NEW!
These high-power 400W two-way PA sound reinforcement
speaker systems provide excellent sound for either
live or playback applications. Features: •Integrated
sound processor for ultimate system control and speaker
protection •Long-excursion driver provides incredibly
deep bass and acoustic power •State-of-the-art 1.35''
aluminum-diaphragm compression driver for exceptional
high-frequency reproduction •Ultra-wide dispersion,
large-format exponential conical horn •Mic/line input with
volume control •Dedicated 2-band EQ •Line output allows
linking of additional speaker systems •13⁄8" pole mountable
•Can be used as a floor monitor •Ergonomically
shaped handles
Order #
Mfr. #
Size
555-10840 B215A
15"
555-10845 B212A
12"
Frequency
Range
55Hz~20KHz
65Hz~20KHz
ONLY
$329.99
279.99
EuroLive
Powered
220 Watt PA
Speaker
System
4Compact
4Integrated mixer
NEW!
These high power 220W
two-way PA sound reinforcement speaker systems excel in
any application, and their ultra compact and light weight
design make them extremely portable. Features: •Class-D
amplifier technology •Internal switch-mode power supply
•Integrated sound processor •Extremely powerful long
excursion driver • 1.35'' aluminum-diaphragm compression
driver •Ultra-wide dispersion, large-format exponential/
conical horn •Ultra-low noise mic/line input with volume
control and clip LED •Additional line output allows
linking of additional speaker systems •13⁄8" pole mountable
•Can be used as a floor monitor •Ergonomically shaped
handle •Frequency range 65Hz~20KHz
Order #
555-10870
555-10875
page
64
Mfr. #
B210D
B208D
Size
10"
8"
44.99
44.99
44.99
44.99
NEW!
Digital Stereo 31-Band
Equalizer/Feedback
Destroyer/Dynamics Processor
Eurolive 12" Powered 125 Watt Monitor Speaker
4Analog processor
4Integrated mixer
$229.99
199.99
169.99
149.99
NEW!
Range
ONLY
40Hz~20KHz $499.00
45Hz~20KHz 399.00
EuroLive Powered 400 Watt PA
Speaker
ONLY
This 125W active monitor has its own EQ and volume,
so you not only have control of the output, you can also
tweak the highs, mids and lows for reproduction that
gives you a clear, true sense of your sound. It’s a proven
fact that the better you can hear yourself, the better you’ll
play. •Mic/line input with volume control and peak LED
•Dedicated 3-band EQ •Powerful 12" long-excursion
driver •High-resolution 1" driver •Proprietary horn design
for ultra-wide sound dispersion •Integrated 13⁄8" pole
mountable •Frequency response: 60Hz~18KHz
•Mfr. #F1220A
Order #
555-10880
ONLY
$199.00
•Ultra high-resolution 24 bit/96KHz processor for
all EQ, RTA and dynamic applications •Unique true
curve function, what you see on the faders is what you
get as frequency response •FBQ feedback detection
system instantly reveals critical frequencies and can
also be used as an audio analyzer •Automatic feedback
destroyer module plus feedback indication via fader
LEDs •Inaudible noise gate/peak limiter function plus
amazing stereo imager •Digital AES/EBU and S/PDIF
interface and selectable sample rates (44.1, 48, 96KHz)
•Mfr. #DEQ1024 •See MCMelectronics.com
for more information
Order #
555-10945
NEW!
31 Band Stereo
Graphic Equalizer
•Professional 31 band stereo graphic
equalizer •FBQ feedback detection
system instantly reveals critical
frequencies and can also be used as an audio analyzer
•Dedicated mono subwoofer output with adjustable
crossover frequency •Additional low cut filter removes
unwanted frequencies •Ultra low noise audio operational
amplifiers offer outstanding sound performance •1⁄4" and
XLR inputs and outputs •Mfr. #FBQ3102 •See
MCMelectronics.com for more information
Order #
555-10955
ONLY
$129.99
ONLY
$199.99
31 Band Stereo
Graphic Equalizer
4Pink noise generator
•Professional 31 band stereo graphic
equalizer for both live and studio
applications •FBQ feedback detection system instantly
reveals critical frequencies and can also be used as an
audio analyzer •Dedicated limiters with gain reduction
meters for each channel •Pink noise generator provides
test signals for equalizing your sound system to any room
acoustics •Mono subwoofer output with dedicated level
control and adjustable crossover frequency •High-quality
illuminated 45mm faders •1⁄4" and XLR inputs and outputs
•Mfr. #FBQ6200 •See MCMelectronics.com
for more information
Order #
555-10950
NEW!
ONLY
$229.99
179.99
1-800-543-4330
Fax: 1-800-765-6960
NEW!
ONLY
$179.99
15 Band Stereo Graphic Equalizer
•Professional 15 band stereo graphic equalizer •FBQ feedback
detection system instantly reveals critical frequencies and can
also be used as an audio analyzer •Dedicated mono subwoofer output with adjustable
crossover frequency •Additional low cut filter removes unwanted frequencies •Ultra low
noise audio operational amplifiers offer outstanding sound performance •1⁄4" and XLR
inputs and outputs •Mfr. #FBQ1502 •See MCMelectronics.com for more information
Order #
555-10960
ONLY
$99.99
NET 30
Terms
Customer Service: 1-877-626-3532
Professional Audio
NEW!
Multicom Pro
XL Dynamic Processor
Order #
555-10920
ONLY
$129.00
NEW!
Composer Pro
XL Dynamic Processor
Whether you’re recording, mixing or
mastering, the COMPOSER PRO-XL
MDX2600 gives you total dynamic
control. It includes all of the features you would expect
from a reference class compressor—plus a voice-adaptive
de-esser, a new dynamic enhancer, authentic tube
emulation and much more. Features: •Switchable
IKA (interactive knee adaptation) program-adaptive
compression circuitry combines the advantages of
hard-knee and soft-knee characteristics •Integrated
de-esser •Interactive gain control •Switchable dynamic
enhancer •Interactive ratio control expander/gate
circuitry •Ultra low-noise •Input/output level LEDs
•Servo-balanced inputs and outputs with ¼" TRS
and gold-plated XLR connectors
Order #
555-10925
ONLY
$99.99
4
NEW!
The XR4400 gives you four
frequency-selective UTR expanders/
noise gates in a single rack space without compromising
on functionality. The side chains parametric filters allow
you to fine-tune control signals so that the gate reacts only
when you want it to. Separate hold and release controls
and our unique FlexLink system offers additional
flexibility. Features: •Four separate expander/gate circuits
•IRC expander/UTR gate circuitries •Extremely short
attack time (<10 µsec.) •Parametric side chain filter with
monitor function •Independent hold and release controls
for flexible envelope shaping •Maximum attenuation 80dB
•FlexLink system for flexible master/slave configurations
•“Traffic light” display for threshold working point and
gain reduction display
The DEQ2496 is a high precision
digital 24 bit/96KHz EQ/RTA
mastering processor, ideal for
sophisticated live sound trouble-shooting or audiophile
mastering. Features: •Dual 31-band graphic equalizers
(stereo linkable) •Dual 31-band virtual paragraphic
equalizers (stereo linkable) •Dual 10-band parametric
EQs per stereo side •Dynamically-activated EQ •Feedback
destroyer with learning mode •Stereo imager •Compressor/
expander •Limiter •Digital delay •RTA/SPL/FFT analyzer
with auto EQ function •See MCMelectronics.com
for more information
Order #
555-10935
Order #
555-10940
ONLY
$99.99
UltraCurve Pro High
Precision Mastering Processor
NEW!
NEW!
Virtualizer Pro Digital
Multi-Engine 24 Bit
Multi-Effects Processor
Ultra High-Precision Digital
Loudspeaker Crossover
The ULTRADRIVE PRO
DCX2496 is an indispensable tool
for the precise set-up of multiple
loudspeaker systems or arrays. Features: •Three analog
inputs (one suitable as digital stereo AES/EBU input) and
six analog outputs for maximum flexibility •High-end
AKM® 24 bit/96KHz A/D and D/A converters •Integrated
sample rate converter for easy connection of external
digital signals with sampling rates from 32~96KHz
•Precise dynamic EQs for level-dependent equalization
and extremely musical parametric EQs, selectable for
all inputs and outputs •Gold-plated XLR connectors for
all inputs and outputs •See MCMelectronics.com for
more information
Order #
555-10970
ONLY
$299.99
ONLY
$299.99
•High performance 24 bit
multi-engine effects processor
•71 breathtaking new algorithms, most in true stereo
•Wave adaptive virtual room reverb algorithms for ultra
natural reverb and delay •Awesome modulation, dynamic,
psycho-acoustic and EQ algorithms plus innovative amp
simulation, distortion and special effects •11 effect
combinations with selectable serial/parallel routing
•Up to seven adjustable parameters plus high
and low EQ per effect •Mfr. #DSP2024P •See
MCMelectronics.com for more information
Order #
555-10975
ONLY
$99.99
NEW!
NEW!
NEW!
Autocom Pro
XL Dynamic Processor
Feedback Destroyer Pro
Feedback Suppressor/
Parametric EQ
Rackmount 8-Channel DI-Box
The Behringer MDX1600 Autocom
Pro-XL compressor is a dual-channel
compressor/limiter/ expander that
increases vocal presence and energy, compresses mono
or stereo signals without loss of high-frequencies, and
minimizes dangerous signal peaks. Integrated dynamic
enhancer, de-esser, and low-contour filter provide the
utmost in signal enrichment. Features: •Switchable
interactive knee adaptation program •Adjustable dynamic
enhancer •Interactive gain control •Switchable de-esser
•Interactive ratio control •Ultra low-noise •Input/output
LED meters •Servo-balanced inputs and outputs with
1
⁄4" TRS and gold-plated XLR connectors
•Professional, multi-purpose eight
channel direct injection box •Converts
unbalanced line inputs into balanced
outputs •Optional mains or phantom
powered operation •Ultra flat frequency response due to
servo-balanced operation •Allows direct connection to
speaker outputs with up to 3,000W •Ultra low noise
operational amplifiers for outstanding audio performance
•+20dB gain switch for pre-amplification of low level
signals •Attenuation switch for input levels up to
+40dBu •Mfr. #DI800 •See MCMelectronics.com
for more information
Using an ultra-fast feedback
detection algorithm, the FBQ2496
automatically and “intelligently” locates up to 20 feedback
frequencies per channel. Features: •24 bit/96KHz
feedback suppressor/parametric EQ •Locates and destroys
up to 20 critical frequencies per channel •Up for 40 fully
parametric filters •Ultra-narrow notch filters •Open MIDI
architecture for future software updates •Balanced inputs
and servo-balanced outputs with XLR and 1⁄4" connectors
•Mfr. #FBQ2496 •See MCMelectronics.com
for more information
Order #
555-10930
Order #
555-10995
Order #
555-10985
ONLY
$79.99
ONLY
$99.99
ONLY
$149.00
NEW!
Digital Multifunction Signal Processor
Whether you use it with microphones, acoustic instruments, or even as a delay line for large venue
loudspeaker systems, the SHARK DSP110 is a remarkable addition to your live and studio toolkit.
Features: •Discrete mic/line input stage with gain control and +48V phantom power •Automatic
feedback destroyer with learn function •Delay line with up to 2.5 seconds of delay, adjustable in meters, feet and
millisecond •Noise gate with automatic and manual parameter adjustments •Super-musical compressor with variable
density •Level conversion from line to mic level and vice versa •Subsonic filter with adjustable cutoff frequency
Order #
555-10990
ONLY
$119.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
65
4
This processor gives you four
channels of first-class dynamic
control in a single rack space.
With a multitude of new features like the advanced
program-adaptive expander gate, extensive metering
plus a variety of configuration options, the Multicom
Pro XL puts a lot of dynamic processing power in your
rack. Features: •Interactive knee adaptation program
•Interactive ratio control expander/gate circuitry
•Switchable dynamic enhancer for brilliant, lively
audio •Interactive gain control peak limiting circuitry
•Switchable low contour filter •Ultra low-noise
•Input/output LED level meters •Selectable operating
level (+4dBu/-10dBV) •Servo-balanced inputs and
outputs with ¼" TRS and gold-plated XLR connectors
NEW!
Multigate Pro
Four Channel Frequency
Selective Expander/Gate
Section
Section
4
Professional Audio
NEW!
#555-11005
#555-11000
Ultra-Compact Four Channel
Stereo Headphone Amplifier
High-Performance
Passive Direct Injection Boxes
4Connect up to eight headphones
4
NEW!
NEW!
•Ultra-compact headphone amplifier
system for studio and stage
applications •Phones level control plus accurate 6-digit
LED output meter per channel for easy level monitoring
•Two balanced stereo main inputs with independent level
and balance controls •Accurate 6-digit LED main input
meter for precise level indication of both line inputs
•Dual headphone outputs on each channel on front
and rear panels allow a total of eight headphones
to be connected at the same time •Mfr. #AMP800
Order #
555-11035
ONLY
$49.99
NEW!
•High performance passive
direct injection box •Converts
any unbalanced line-level signal
to balanced mic-level output •Provides impedance and
signal matching for the direct connection of instruments
to amplifiers and mixers •Allows the use of long cables
without losing high frequencies •Thru/out jack lets you
send the unbalanced signal to an onstage amplifier while
the balanced signal is routed to the mixer •Switchable
inst/amp input for connecting instruments or amplifier
outputs with up to 3,000W (#555-11000 only) •Filter
switch reduces annoying hiss and buzz (#555-11000
only) •See MCMelectronics.com for more information
Order #
555-11000
555-11005
Mfr. #
DI600P
DI400P
ONLY
$29.99
24.99
Ultra Low-Latency
USB Audio Interface with Digital Output
The UCA202 provides two analog mono inputs and
outputs (for monitoring), USB connectivity and an
additional S/PDIF optical output for direct analog-todigital conversion. The stereo headphone output features
a dedicated level control and lets you listen to both the
input and output. Features: •High-resolution 48KHz
A/D and D/A converters for high-end audio quality
•Works with your PC or Mac computer •Additional
S/PDIF optical output for direct digital conversion
•Powered via USB bus •Free recording and editing
software available at Behringer.com
Order #
555-11050
ONLY
$29.99
NEW!
NEW!
Back
Ultra-Compact Nine
Band Graphic Equalizer
Ultra compact graphic equalizer for
studio and stage applications •FBQ
feedback detection system instantly
reveals critical frequencies and can also be used as an
audio analyzer •Additional low cut filter removes
unwanted frequencies •Accurate six segment LED
input/output meters and level control for precise level
indication •Ultra low noise audio operational amplifiers
offer outstanding sound performance •Mfr. #FBQ800
•See MCMelectronics.com for more information
Order #
555-10965
ONLY
$49.99
NEW!
Two Channel DI-Box/Splitter
•Professional active two channel
DI-box/splitter •Converts two
separate unbalanced ¼" line inputs
into two balanced XLR outputs
•Mono, two channel or stereo DI
box operation •Additional split
mode •Phantom or 9V battery
powered •Switchable input
attenuation allows connection to outputs with up to
3,000W •Ground life switch •Mfr. #DI20 •See
MCMelectronics.com for more information
Order #
555-11015
ONLY
$29.99
The ultra-compact FCA202 firewire audio interface is
an ideal way for musicians to connect to their PC or Mac
computers. Due to its small size and low-latency operation,
the FCA202 is especially well suited for traveling
musicians who record and edit compositions on laptop
computers. Features: •Ultra-flexible audio interface
connects your instruments, mixer, etc. with your computer
for recording and playback •High-resolution 24 bit/96KHz
converters •Stereo headphone output •Powered via
FireWire bus or included power adapter for use with
4 pin FireWire PCs •Powerful editing software included
•Standard port for Kensington security lock provided
Order #
555-11045
MINIFEX Ultra-Compact 24 Bit
Stereo Multi-FX Processor
•Ultra compact stereo multi-effects
processor for studio and stage
applications •16 FX presets in
24 bit/48KHz resolution including reverb, delay, chorus,
flanger, phaser, rotary speaker, pitch shifter and multieffects •Intuitive FX preset control with LEDs indicating
the selected program •Versatile edit and tap/select
functions to control a wide range of FX parameters •Stereo
input level control with accurate six segment LED input
meter for precise level indication •Mfr. #FEX800 •See
MCMelectronics.com for more information
•Professional active direct
injection box •Converts unbalanced
NEW!
line inputs to balanced outputs •Ground
lift switch •Internal battery automatically
shuts off when phantom power is connected •Direct
connection of amplifier outputs with ratings of up to
3,000W •Switchable input attenuation allows input levels
up to +50dB •Mfr. #DI100 •See MCMelectronics.com for
more information
Order #
555-10980
Order #
555-11010
ONLY
$49.99
Ultra Low-Latency
Firewire Audio Interface
ONLY
$99.95
Ultra-Rugged DI Box
ONLY
$39.99
NEW!
9VDC Power Supply
•9VDC •100mA current •2.2mm
plug with negative tip and positive
sleeve •Mfr. #PSU-SB
Order #
555-11065
ONLY
$9.99
NEW!
MicroPower Ultra-Compact
Phantom Power Supply
Ultra-Compact Four Channel
Stereo Headphone Amplifier
The ultra-compact PS400 provides the power you need
to use your favorite condenser mics, and it’s small
NEW!
enough to fit in your pocket. Features: •Selectable
+12/+48V power supply •Ultra low-noise audio
performance •12VDC adapter included •High-quality components and exceptionally
rugged construction ensure long life
•Four channel stereo headphone amplifier for use with all
types of headphones •Four high-power stereo amplifiers
•Output level control for each channel •Ultra low-noise 4580 operational amplifiers for
outstanding audio performance •12VDC adapter included •Mfr. #HA400
Order #
555-11025
Order #
555-11040
page
66
ONLY
$19.99
1-800-543-4330
Fax: 1-800-765-6960
4Connect up to four headphones
ONLY
$29.99
NET 30
Terms
Customer Service: 1-877-626-3532
Professional Audio
NEW!
Section
4
Professional Table
Top CD Player
Order #
555-11200
4
Gemini’s CDJ-203 is
the ideal professional
table top CD player for DJs
that require all the essential
features and stylish design at a cost
effective price. Features: •Audio CD and CD-R
compatible •Extra large jog wheel •Anti-shock using
RAM buffer memory •Two selectable jog modes pitch
bend/search •Instant-start and cue with preview •Single
and continuous play modes •Seamless loop with reloop
•Pitch bend via jog wheel or buttons •Three mode time
selection •Frame accurate search •Large blue backlit
LCD display •Variable pitch control
NEW!
ONLY
$149.99
GROOVE Professional PC Mixing Software
Professional
Table Top CD/
Mp3/USB Player
Gemini’s CDJ-600
NEW!
professional CD/mp3/USB
tabletop CD player gives you the
ability to play mp3 files from any USB storage device and
built-in scratch effect. Features: •Audio CD,CD-R, and
mp3 compatible •Plays mp3 and WAV files from USB
storage device •Anti-shock using RAM buffer memory
•Extra large jog wheel •Two selectable jog modes •Scratch
effect mode •Instant-start and cue with preview •Single,
continuous and repeat play modes •Seamless loop with
re-loop •BPM read out •Pitch bend via jog wheel or
buttons •Two mode time selection •Frame accurate search
•Variable pitch control with three settings
Order #
555-11205
Groove is a complete, easy-to-use and reliable professional
mixing software that allows you to professionally mix,
organize and navigate through your mp3, WMA, OGG
Vorbis and WAV files to create the ultimate playlists,
technical mixes and flexible background music.
Features: •MIDI and keyboard controller support •Full
featured mixer with 3 band EQ •Instant-start and cue with
preview •Looping with dedicated loop times •Vinyl scratch
emulation •Delay, flanger, phaser and reverb •High-quality
mix session recorder System requirements: •Windows
XP/Vista/7 •1.6GHz, 256Mb RAM
Order #
555-11230
ONLY
$99.99
Professional Rackmount
Dual CD/Mp3/USB Mixing Console
NEW!
The CDMP-6000 CD/mp3/USB mixing console from
top to bottom gives the DJ all the tools they need at their
fingertips. Player features: •Audio CD,CD-R, mp3
•Plays mp3 and WAV files from USB storage device
•Anti-shock using RAM buffer memory •Two selectable
jog modes, pitch bend/search •Scratch effect mode
•Instant-start and cue with preview •Single, continuous
and repeat play modes •Seamless loop with re-loop
•BPM read out •Pitch bend via jog wheel or buttons
•Two mode time selection •Frame accurate search
•Variable pitch control with three settings Mixer
features: •3-band EQ with gain control •1⁄4" headphone
output •XLR and 1⁄4" mic input •Auxiliary inputs for
phono or line devices
Order #
555-11225
ONLY
$269.99
ONLY
$419.99
NEW!
NEW!
Professional Rackmount
Dual CD/Mp3/USB Player
Dual CD Mixing
Console
Features player:
•Audio CD and
CD-R compatible •Anti-shock
NEW!
using RAM buffer memory •Two selectable
jog modes pitch bend/search •Instant-start and cue with
preview •Fader-start capability •Pitch bend via jog wheel
or buttons ±16% •Three mode time selection •Frame
accurate search •Rubber jog wheels with finger grips
•Variable pitch control with a ±12% range •Direct track
access buttons •Fully programmable with repeat function
•+10 track button for quick navigation Mixer: •3-band EQ
with gain control •1⁄4" headphone output •XLR and 1⁄4" mic
input •Auxiliary inputs for phono or line devices •Balanced
XLR outputs •Mfr. #CDM-3600
Designed to make digital audio file playback easier and
more affordable, Gemini’s new CDMP-2600 professional
CD/mp3/USB player is the perfect rack mountable unit for
your mobile DJ or club installation. Features: •Audio CD,
CD-R, mp3 compatible •Plays mp3 and WAV files from
USB storage device •BPM (TAP) read out •Anti-shock
using RAM buffer memory •Three selectable jog
modes pitch bend/search/scratch •Scratch effect mode
•Multifunction scroll knob for mp3 folder navigation
•Instant-start and cue with preview •Single and continuous
play modes •One seamless loop per side with re-loop
•Pitch bend via jog wheel or buttons •Two mode time
selection •Frame accurate search •Bright VFD display
•Variable pitch control with three settings ±8,16 and 24%
Order #
555-11210
Order #
555-11220
ONLY
$249.99
ONLY
$369.99
Rackmount CD/Mp3/USB Player
The CDMP-1400 is a perfect piece for someone wanting
to playback digital music files, and still have the capability
to play CDs. Features: •Audio CD, CD-R and mp3
compatible •Plays mp3 and WAV files from USB storage
device •Balanced XLR outputs, RCA output, record output
•1⁄4" front MIC input, rear combo XLR MIC input •BPM
(TAP) read out •IR remote control •Anti-shock using RAM
buffer memory •Multifunction scroll knob for mp3 folder
navigation •Instant-start and cue with preview •Single and
continuous play modes •Seamless loop with re-loop •Pitch
bend buttons •Variable pitch control with three settings
Order #
555-11215
ONLY
$249.99
DJ equipment not included.
NEW!
Professional DJ Road Cases
•Ten upper rack spaces •Black carpeting •Metal corners, spring
handles and removable lid •Front and rear access with doors
Lower Rack
Order #
Dimensions (W x H x D) Weight Spaces ONLY
555-11280 22.5" x 13.25" x 20.75"
31 lbs.
2
$89.99
555-11282 22.25" x 19" x 20.75"
42 lbs.
6
119.99
555-11284 22.5" x 23.5" x 20.75"
44 lbs.
8
129.99
555-11286 22.5" x 37.75" x 20.75"
67 lbs.
16
179.99
#555-11280
Follow us on:
Product Questions Email: tech@MCMelectronics.com
#555-11282
#555-11284
MCMelectronics.com
Email: quotes@MCMelectronics.com
#555-11286
page
67
Section
4
Professional Audio
NEW!
GVX Series Two-Way PA/DJ Speakers
The GVX series loudspeakers and subwoofers from Gemini offer an unmatched
design and terrific sound quality. Constructed with lightweight MDF, they are
extremely portable on the road and can easily be installed in any environment.
Features: •13⁄8" pole mountable •Speakon input and output connectors •Max
SPL: 132dB •Impedance: 8ohm •Optional eyebolts available for fly mounting
•See MCMelectronics.com for more information
Power capacity
Order #
Woofer Size
(RMS/peak)
555-11235
12"
300W/1200W
555-11240
15"
500W/2000W
Eye bolts for suspended installation (three pack)
555-11335
-
-
4
NEW!
Frequency
Response
60Hz~20KHz
50Hz~20KHz
Dimensions
(H) x (W) x (D)
24.2" x 13.8" x 14.2"
27.2" x 16.6" x 17.4"
-
-
ONLY
$179.99
229.99
12.99
Stands sold separately.
GVX Series Powered PA/DJ Subwoofers
Three Piece PA/DJ
Speaker Package
•Two 10" trapezoidal loudspeakers and 15" powered
subwoofer •Efficient MDF bandpass 13⁄8" stand mountable
subwoofer enclosure with wheels •Three channel power
amplifier and active crossover built-in to subwoofer
•230W RMS on subwoofer channel, frequency response
of 100Hz~20KHz •85W RMS per satellite channel,
frequency response 35Hz~100Hz •400W total RMS
and 800W peak power •120dB total continuous SPL
•Individual channel sensitivity and volume controls
•Balanced XLR and 1⁄4" inputs •Speakon™ outputs for
satellite channels (cables included) •Variable speed fan
•Full protective metal grill •Black painted finish with
rubber feet
Order #
555-11330
Optional stand (sold individually)
555-11340
The GVX series subwoofers from Gemini offer an unmatched design
and terrific sound quality. Constructed with lightweight MDF, they
are extremely portable on the road and can easily be installed in any
environment. Powerful internal amplifiers allow simplified direct
connection to mixers and source gear. Features: •13⁄8" pole mountable
•Balanced XLR and 1⁄4" combo input •Built-in amplifier with limiter
circuit •Balanced XLR full range output and high pass output
•Electronic crossover with adjustable frequency control (55Hz~200Hz) •Phase inverter switch •Max SPL: 129dB
•Optional eyebolts available for fly mounting •See MCMelectronics.com for more information
Power capacity
Order #
Woofer Size
(RMS/peak)
555-11245
12"
300W/1200W
555-11250
15"
400W/1600W
Eye bolts for suspended installation (three pack)
555-11335
-
-
Dimensions
(H) x (W) x (D)
19" x 15.5" x 19.75"
19.75" x 15.5" x 19"
-
-
ONLY
$329.99
379.99
12.99
NEW!
These sturdy ABS housed speakers are perfect for the traveling DJ, or as a permanent fixture in
any club, bar, or restaurant. Features: •Wide dispersion horn design •Titanium compression driver
•13⁄8" pole mountable •Speakon input and output connectors •Max SPL: 132dB •Impedance: 8ohm
•Recessed smooth molded handle Active speakers feature: •XLR and 1⁄4' microphone input •Bass
and treble tone control •Master volume •See MCMelectronics.com for more information
9.99
TXM Series Powered
Mixing Console
Power capacity
(RMS/peak)
Frequency
Response
Dimensions
(H) x (W) x (D)
70W/280W
100W/400W
200W/800W
300W/1200W
70Hz~18KHz
60Hz~18KHz
45Hz~18KHz
40Hz~18KHz
16.1" x 11.4" x 8.7"
19.7" x 14" x 10.6"
22.8" x 16.5" x 12.2"
26.97" x 18" x 15.75"
$79.99
99.99
149.99
199.99
70W/280W
100W/400W
200W/800W
300W/1200W
70Hz~18KHz
60Hz~18KHz
45Hz~18KHz
40Hz~18KHz
16.1" x 11.4" x 8.7"
19.7" x 14" x 10.6"
22.8" x 16.5" x 12.2"
26.97" x 18" x 15.75"
139.99
179.99
229.99
279.99
Two-Way Professional Loudspeakers
Tabletop powered mixers feature recording console specs,
studio quality effects and plenty of power, designed as an
all in one portable yet powerful solution for live sound
applications. 16 and 20 channel powered mixers, have
selectable power amp mode settings for 500W x 2 channel
stereo operation, or 1000W bridged mono. They feature
high-quality microphone preamps with phantom power,
channel inserts and low cut filters. Features: •Your choice
of either eight or 12 high quality microphone preamps
•500Wx 2 channel stereo output, bridgeable to 1000W
mono •Independent nine-band graphic equalizers for
each output channel •Internal 24 bit effects processor with
100 preset programs •Mono sub output with variable low
pass filter •1⁄4" and Speakon® outputs •Two pre aux-sends,
and one effects send (#555-8002) •One pre, and one post
aux-send, and two effects sends (#555-8004) •Large
handle and rack mounting kit are included
Order # Model # Input Channels Mic Inputs
ONLY
555-8002 TXM16
16
8
$649.00
555-8004 TXM20
20
12
799.00
68
Frequency
Response
47Hz~250Hz
40Hz~250Hz
Passive and Active ABS PA/DJ Speakers
ONLY
$559.99
Order #
Woofer Size
Passive speakers
555-11290
8"
555-11295
10"
555-11300
12"
555-11305
15"
Active speakers
555-11310
8"
555-11315
10"
555-11320
12"
555-11325
15"
page
NEW!
NEW!
These loudspeakers are designed to provide high-output music and sound reinforcement in
a lightweight, cost efficient package. Robust, high-sensitivity woofers and ferrofluid-treated
1.77" compression drivers are combined with a highly evolved crossover network technology.
Features: •Heavy gauge perforated steel grill •13⁄8" pole mountable •Multi-vented molded
plastic enclosure •Speakon connections
Order #
555-4905
555-4915
Size
12"
15"
Capacity
200W RMS
300W RMS
Response
60Hz~20kHz
50Hz~20kHz
SPL
119
123
Dimensions
23" x 161⁄4" x 13"
27" x 19" x 15"
ONLY
$235.00
269.00
MDR 6 Mixing Console
Compact six input stereo mic/line mixer is perfect for small studio and desktop PC
recording. Channels one and two accept balanced XLR, 1⁄4" TRS, or unbalanced 1⁄4" mic or
line inputs. Both feature a three band EQ, adjustable aux send level and may be panned L/R.
Stereo paired channels 3/4 and 5/6 each also have a three band EQ, aux send level and L/R
balance adjustment. Channels three and five accept balanced XLR, 1⁄4" TRS, or unbalanced
1
⁄4" mic or line inputs. Channels four and six accept 1⁄4" TRS, or unbalanced 1⁄4" line inputs.
Master level controls are two 60mm faders, with separate rotary adjustment for headphone
level. Outputs include left and right stereo channels, as well as an isolated mono output,
with an independent level control.
Order #
555-2170
1-800-543-4330
Fax: 1-800-765-6960
ONLY
ONLY
$119.00
NET 30
Terms
Customer Service: 1-877-626-3532
Professional Audio
MDR Series
Mixing
Consoles
with DSP
Order #
555-2195
555-2200
Model
MDR1248
MDR1688
Total Channels
12
16
ONLY
$249.00
289.00
Resound HD PA/DJ Speakers
Order #
Woofer Size
555-10270
10"
555-10275
12"
555-10280
15"
Power
capacity (peak)
300W
500W
600W
Frequency
Response
60Hz~19KHz
50Hz~19KHz
47Hz~19KHz
Max
SPL
116dB
121dB
124dB
Dimensions
(H) x (W) x (D)
24.5" x 17.5" x 15.5"
28" x 20" x 16.25"
31" x 21.5" x 18.5"
ONLY
$169.00
199.00
249.00
12" ABS Active Monitor
Speaker System
12" ABS Monitor
Speaker System
✔12" low frequency driver
✔Built in 300W amplifier
✔XLR and 1⁄4" mic
and line inputs
✔12" low frequency driver
✔Speakon™ and 1⁄4" inputs
✔Daisy chain Speakon™
and 1⁄4" outputs
The S-Zone gives system installers all the features they
need to control up to four zones of audio in a compact,
1RU unit. Input #1 and #2 accept balanced mic (mono)
or unbalanced L/R (stereo) line signal. input #3 and #4
accept unbalanced L/R (stereo) line signal. The unique
front panel control section allows you to assign any of
the four inputs to any or all of the four zones with just the
push of a button. Each Input includes a level and stereo/
mono selector. Each output includes a level, stereo/mono
selector, plus bass and treble controls. Front mounted
speaker with volume control and headphone jack,
allows the operator independently monitor each source.
All connections are screw terminal type, with detachable
terminal strips.
Order #
555-2191
Order #
555-9650
ONLY
$349.00
NEW!
Impressive power handling, upgraded compression
drivers and tough, lightweight cabinet construction
make the Resound HD series extremely versatile, perfect
for gigging bands, houses of worship, performance venues
and everything in between. Features: •1" throat horn •1.5"
titanium compression driver •Dual-port tuned enclosure
•Dual 1⁄4" and Speakon® connections •13⁄8" pole mount
Perfect for monitoring
on the stage or in the
studio, may also be
used as mains for small
venues. May be pole
mounted, or will stand
freely vertically or
horizontally at near
and far field angles.
NEW!
Features: •13⁄8" diameter
pole mount •Heavy-duty integrated handle •Four flying
point mount attachments •Large mating stacking bumpers
Specifications: •Power capacity: 300W RMS •Frequency
response: 65Hz~18KHz •Sensitivity: 93dB (W/M)
•Nominal impedance: 8ohm •Connections: Parallel 1⁄4"
and parallel Speakon™ inputs and feed through outputs
•Dimensions: 24" (H) x 16" (W) x 14" (D) •Weight:
38 lbs. •Mfr. #dB300 •Sold individually
S-Zone Four-Zone
Mic/Line Mixer
4
ONLY
$299.00
Perfect for monitoring on
the stage or in the studio,
may also be used as mains
for small venues. Onboard
300W amplifier allows this
to be connected directly to
a mixing console output. Or
NEW!
connect a microphone or other
audio source for a completely self contained audio
system. Features: •Custom designed 12" woofer
•Titanium compression tweeter/horn assembly
•Bi-amplified high and low frequency sections
•250W RMS (low) + 50W RMS (high) power output
•60Hz~24KHz frequency response •13⁄8" diameter pole
mount •Heavy-duty integrated handle •Four flying point
mount attachments •Large mating stacking bumpers
Rear panel: •XLR female mic input •XLR male line level
output •Combo jack line level input accepts 1⁄4" unbalanced
or XLR balanced signal •Mic input level control •Line
level input level control •Independent bass and treble
controls •Switchable 80Hz, 12dB/octave low filter •Mix/
thru output selector (allows line output to see either line
input only, or mic line mix with low filter and bass/treble
controls) •Dimensions: 24" (H) x 16" (W) x 14" (D)
•Weight: 47 lbs. •Model #DB300A •Sold individually
Order #
555-9640
ONLY
$449.00
XM910 Powered Mixing Console
The extremely powerful Samson XM910 powered
mixer for medium to large stage venues. It includes six
mic/line inputs with 1⁄4" (line) and XLR (mic) connections.
Amplifier modes: •Stereo, 450W x 2 channel •Split,
450W main, 450W monitor output •Bridged: 900W x 1
channel Features: •Low noise mic pre amps •Phantom
power •Studio quality 24 bit DSP stereo effects with 100
selectable presets of reverb, delay, and chorus •Three band
EQ on each input channel •48V phantom power •Effects
and monitor sends •Independent ten band EQ for each
output channel •Two separate RCA type stereo line level
inputs, with DJ style cross fader •ABS cabinet with
convenient carry handles
Order #
555-8010
ONLY
$549.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
XM410 Powered Mixer
XM610 Powered Mixing Console
The compact, light weight and powerful Samson XM610
powered mixer includes six mic/line inputs with 1⁄4" (line)
and XLR (mic) connections. Features: •Low noise mic
pre amps •Phantom power •24 bit digital effects with
100 selectable presets of reverb, delay, and chorus •Three
band EQ on each input channel •Effects and monitor sends
•Independent seven band EQ for the main and monitor
output sections •600W of total system power, split
between main and monitor amplifier sections •High
impact ABS cabinet with convenient carry handles
The compact, light weight and powerful Samson XM410
powered mixer includes six mic/line inputs with 1⁄4" (line)
and XLR (mic) connections. Features: •Low noise mic
pre amps •Phantom power •24 bit digital effects with 100
selectable presets of reverb, delay, and chorus •Three band
EQ on each input channel •Effects and monitor sends
•Seven band EQ on the main output section •RCA inputs
and outputs for CD or tape •400W of total system power,
split between Main and Monitor amplifier sections •High
impact ABS cabinet with convenient carry handles
Order #
555-8005
Order #
555-8000
ONLY
$449.00
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$349.00
page
69
4
Whether
building a
home studio or
setting up a
sound system
for performing
live, MDR
mixers deliver
superior audio
quality with an
impressive
feature set. The MDR1248 four mic inputs, while the
MDR1688 provides eight mic inputs, plus four stereo
line inputs, with all the features needed for live or home
studio applications. High-quality, discreet, low-noise mic
preamps, three band EQ, 60mm faders, and internal 24 bit
DSP processing, gives users total control over signal flow
and the best possible sound. Features: •24 bit digital
effects processor with 256 presets •Three band EQ with
sweepable mids on mic/line inputs •Four band EQ on
stereo channels •60mm faders •Includes 19" rack mount
kit •Detailed specifications on MCMelectronics.com
Section
Section
4
Professional Audio
MDR 624
Mixing Console
Servo Series
Power Amplifiers
4
✔Dual temperature-sensitive variable fans
✔Compact two rack unit height
✔Up to 600W bridged output at 8ohm
The Servo Series of power amplifiers is ideal for stage or studio monitor use. The efficient, whisper quiet fan cooling
ensures non–intrusive operation. All models are 4ohm stable and bridgeable at 8ohm, perfect for bi–amping and
subwoofer applications. Features: •Wide linear frequency response from 20Hz~20KHz •Independent L/R level controls
with 41 detents •10 segment, three color LED level meters •Overheat, overload output protection •1⁄4" and binging post
speaker outputs •1⁄4" (+4dBu) line level inputs •RCA (-10dBv) Order # Mfr. # Stereo Output Bridged Output ONLY
line level inputs •Compact two rack–space design •Output
555-8050 Servo 200 100W x 2
200W x 1 $199.00
ratings are RMS, both channels driven at 4ohm •Bridged
555-8051 Servo 300 150W x 2
300W x 1
279.00
output is RMS, at 8ohm
555-8052 Servo 600 300W x 2
600W x 1
329.00
Slim 1RU Servo Series
Power Amplifiers
✔Quiet convection cooling
✔Ultra slim single rack unit height
✔120W bridged output at 8ohm
Ideal for powering monitors in the studio, or multiple speaker pairs in a distributed sound installation, Servo amplifiers
provide “reference-class” performance in a compact package. Toroidal power transformer, bipolar design and convection
cooling (variable speed fan in Servo 201a) ensure reliability and quiet performance. Low cost and compact 1RU size
invites installation of multiple units in the equipment rack. Features: •Balanced TRS 1⁄4" inputs •Unbalanced RCA inputs
•Individual left and right level control •Five-segment, three Order #
Model #
Power Output
ONLY
color LED meters •Headphone jack •Speaker output mute
555-7990 Servo 120a
50W x 2CH $199.00
•Power output rated RMS at 4ohm •Detailed specifications
555-8045 Servo 201a
100W x 2CH
249.00
available on MCMelectronics.com
#555-2126
SX Series Rack
Mount Stereo Amplifiers
Exceptionally rugged and reliable,
the Samson XS Series includes
four models, from 1200W~2800W RMS, to fit seamlessly into a variety of sound reinforcement applications. Endowed
with comprehensive control capability and protection features, these amplifiers provide extensive features and stable
performance in continuous duty situations. Designed for maximum power and efficiency, these power amplifiers are
ideal for sound reinforcement situations, commercial installations and for powering PA systems. Features: •Bridgeable
operation •Dual temperature–sensitive, speed–controlled fans •Compact 2RU size •Efficient class AB design (SX1200
and SX1800) •High power rail switching design (SX2400
Order # Model # Stereo Output Bridged Output ONLY
and SX2800) •2ohm stability •Front panel input level
1200W x 1 $349.00
controls with 42 detents •Three–segment output LED meters 555-2121 SX1200 450W x 2
555-2126 SX1800 600W x 2
1800W x 1 449.00
•Relay–controlled outputs •Binding post outputs •Speakon™
555-2131 SX2400 750W x 2
2400W x 1 549.00
outputs •XLR and locking TRS balanced inputs •Output
555-2136 SX2800 900W x 2
2800W x 1 599.00
ratings are RMS, both channels driven at 4ohm. Bridged
output is RMS, at 4ohm.
SLA-1 Studio
Linear Amplifier
Order #
555-7995
ONLY
$79.49
MDR 1064
Mixing
Console
The MDR 1064
ten–channel mixer
is a comprehensive
solution for live
sound, recording,
fixed installation
and post production
applications. Features:
•Ten input channels
(six mic/line, plus two stereo) •Flexible design topology
•2-track to MIX level control, allows you to mix in
a CD, DAT or compute sound card with the channel
faders •Three–band EQ on each input channel •Two aux
sends for external effects on stage monitor or headphone
mix •12 segment LED VU meter •Switchable 48V
phantom power on mic inputs •Channels 1 and 2 are
mono with L/R pan and accept XLR mic or 1⁄4" TRS
line input •Stereo input 3/4 and 5/6 accept 1⁄4" TRS line
Specifications: •Frequency response: 10Hz~45KHz
•THD: <0.005% at 1KHz •EQ frequencies: ±15dB at
80Hz, 2.5KHz and 12KHz •Dimensions: 2.76" (H) x
12.20" (W) x 12.52" (D)
Order #
555-7996
SLA-2 Studio
Linear Amplifier
✔Temperature sensitive variable fan
✔Ultra slim single rack unit height
✔Bridged output stable to 4ohm
The MDR 624 six–
channel mixer is
a comprehensive
solution for live
sound, recording,
fixed installation
and post
production
applications.
Features: •Six
input channels (two
mic/line, plus two stereo)
•Flexible design topology •2-track to
MIX level control, allows you to mix in a CD, DAT or
compute sound card with the channel faders •Three–band
EQ on each input channel •Aux send for external effects
on stage monitor or headphone mix •Eight segment LED
VU meter •Switchable 48V phantom power on mic inputs
•Channels 1 and 2 are mono with L/R pan and accept
XLR mic or 1⁄4" TRS line input •Stereo input 3/4 and 5/6
accept 1⁄4" TRS line Specifications: •Frequency response:
10Hz~55KHz •THD: <0.05% at 1KHz •EQ frequencies:
±15dB at 80Hz, 2.5KHz and 12KHz •Dimensions:
1.98" (H) x 7.36" (W) x 10.12" (D)
ONLY
$149.00
NEW!
✔Temperature sensitive variable fan
✔Ultra slim single rack unit height
✔Bridged output stable to 4ohm
Compact size and solid performance make this single
rack space amplifier an ideal choice in any of the
following applications: •Residential distributed
audio •Studio monitoring •Small live venues
•Churches •Broadcast radio/TV Features: •Toroidal power
transformer •Temperature controlled fan •Extremely wide
frequency response •Balanced TRS 1⁄4" and XLR inputs
•Heavy-duty binding post outputs •All steel 1RU rackmount chassis Specifications: •Power output: 100W RMS
x 2 channels @ 8ohm, 130W RMS x 2 channels @ 4ohm,
260W RMS bridged mono @ 8ohm •Frequency response:
10Hz~40KHz ±1.0dB •THD: <0.05% •Power
requirements: 120VAC, 60Hz •Dimensions:
1.75" (H) x 19.0" (W) x 9.5" (D)
Compact size and solid performance make this single rack
space amplifier an ideal choice in any of the following
applications: •Residential distributed audio •Studio
monitoring •Live sound systems •Churches •Clubs •DJ
sound •Broadcast radio/TV Features: •Toroidal power
transformer •Included tamper proof cover •2ohm output
stability •Extremely wide frequency response •Balanced
TRS 1⁄4" and XLR inputs •Detachable screw terminal
inputs •Heavy-duty binding post outputs Specifications:
•Power output: 200W RMS x 2 channels @ 8ohm, 280W
RMS x 2 channels @ 4ohm •Frequency response:
10Hz~40KHz ±0.5dB •THD: <0.05% •Power
requirements: 120VAC, 60Hz •Dimensions:
1.75" (H) x 19.0" (W) x 13.5" (D)
The SLA-4 Studio Linear Amplifier has been designed
and engineered to provide clean, quiet power and
excellent sound with ultra-low noise and distortion.
Ideal for professional, project and home studios.
Features: •Power output (RMS): 100W x 4 @ 8ohm,
140W x 4 @ 4ohm, 200W x 2 @ 16ohm, 280W x 2 @
8ohm (bridged), 100W x 2 @ 8ohm and 280W x 1 @
8ohm (bridged) •10Hz~40KHz, ±0.5dB •XLR and 1⁄4"
inputs •Ground lift switch •Silent cooling system •Binding
post outputs •All steel and aluminum chassis Dimensions:
1.75" x 19" x 13.5"
Order #
555-7660
Order #
555-7665
Order #
555-10560
page
70
ONLY
$269.00
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$369.00
Rack Mount 400 Watt
Studio Linear Amplifier
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$439.00
Professional Audio
NEW!
iConnex Portable
USB Soundcard
with Phono Preamp
Order #
555-11345
ONLY
$49.99
G3 Portable
Instrument Recorder
NEW!
The G3 is a portable recorder with a
super bright color LCD that allows you
to record from any instrument with a
line output. Just plug into the ¼" input
jack and start recording. Features:
•Included 1Gb SD card for storage and
easy transfer •Records in either mp3 or
WAV format with CD quality sound
•Records from any mono or stereo line
source •1⁄4" headphone/line output •1⁄4"
input jack •Input gain switch with three levels
•Easily playback previously recorded media •Powered by
four “AA” batteries (included) •USB cable included
Order #
555-11350
ONLY
$139.99
M3 Portable
Digital Recorder
The M3 is perfect
for everything from
professional field
recording to corporate
NEW!
meetings, training, and
education. Record via balanced
3.5mm line inputs or mic input. Features: •Included 1Gb
SD card for storage and easy transfer •Records direct to
USB thumb drive (not included) •Records in either mp3
or WAV format with CD quality sound •Records from any
mono or stereo line source •3.5mm headphone/line output
•3.5mm input jack •Input gain switch with three levels
•Easily playback previously recorded media •Powered by
four “AA” batteries (included) •USB cable included
NEW!
Rackmount Four Channel Audio FX Mixer
Perfect for vocal manipulation and mixing, Gemini’s
MM-4000 offers exceptional value to karaoke and club
DJs. Features: •Six line and two phono RCA inputs •One
balanced XLR master microphone input •Four unbalanced
1
⁄4" mic channel inputs •Master, zone and record RCA
outputs •Balanced XLR master output •Three band rotary
line EQ control per channel •Eight effect DSP module
with 16 presets •Dry/wet rotary control •Rotary control
FX selector •Fully removable, user replaceable rail glide
cross fader •Assignable cross fader •Rotary gain control
per channel •Dual mode VU display with bright LED
•Push-button cue section with CUE/PGM fader control
•Rotary master, zone, balance and cue volume controls
•Rotary main mic volume control •Two band main mic
EQ •Auto or manual talk-over feature •Face plate located
1
⁄4" headphone jack
Order #
555-11255
ONLY
$249.99
NEW!
4
USB Three Channel
Stereo Mixer
•10" five line three
channel mixer with two
phono/line RCA inputs
•USB connectivity for
your Mac or PC’s media
player •Simultaneously
play and record to your
computer via USB
•Master and record RCA
outputs •Master volume rotary knob
NEW!
•Cross fader curve and reverse selector
switches •Cue section with rotary cue volume and CUE/
PGM controls with split cue switch •Three band rotary
line EQ with rotary gain channel control •Mic section with
rotary mic volume, high and low EQ controls •VU meters
with master/cue option •iPod cable •Front panel mounted
1
⁄4" headphone connector •Mfr. #PS-626USB
Order #
555-11270
ONLY
$149.99
Two Channel
Stereo Mixer
Rackmount Three Channel Stereo Mixer
Offering the utmost bang for your buck, this 19" three
channel professional mixer comes equipped with an
extensive feature set tailored towards DJs of all levels.
Features: •Six line, two phono/line convertible RCA and
one 1⁄4" mic inputs •Five band EQ assigned to the master
output •Two band mic EQ with mic gain control •Cue/
program rotary control •User replaceable rail glide cross
fader •Master and record output via RCA •Six position VU
meter with cue/master switch •Mono/stereo toggle switch
•iPod friendly (cable included) •Mfr. #MM-1000
Order #
555-11260
ONLY
$109.99
•Ground screw for
turntable connectivity
•Rotary gain channel
control •Three band rotary
EQ per channel with
-30db cuts •iPod cable
included •Screw-less
bottom panel for
NEW!
unobstructed mixing •Crossfader curve
and reverse controls •VU meters with
1
master/cue option •Rotary cue/PGM fader • ⁄4" mic input
•1⁄4" headphone output •RCA master and record outputs
•Four line, two convertible phono/line RCA inputs
•Mfr. #PS-424X
Order #
555-11275
ONLY
$99.99
Pole Mount Stereo
Amplifier System
NEW!
The RM3 records directly onto any supported USB storage
device or on the provided 1Gb SD memory card in mp3 or
WAV format. Features: •Full color LCD screen •Records
from any mono or stereo line source •Records 128, 256, or
320 mp3 and WAV files •Combo XLR and 1⁄4" microphone
inputs with mic/line switch •Front and rear RCA inputs
•1⁄4" line input, 1⁄4" line/headphone output •Balanced XLR
outputs •RCA outputs •Easy playback of previous
recordings •AC adapter and USB cable included
This dual ten band graphic EQ with on/off switch
allows you to tweak your sound to an exact level of your
satisfaction, putting the power of sound in the your hand.
Features: •5RU mounting •Four stereo channels •Master,
record, booth and zone RCA outputs •Dual ten band
graphic EQ with on/off switch and blue LED indicator
•Rotary zone, booth and cue volume controls •Stereo/mono
switch •Assignable crossfader •Removable, user
replaceable Rail GlideT crossfader •Push button cue
per channel with green LED indicator •CUE/PGM fader
control allowing cue mix •Two 1⁄4" mic inputs •XLR input
•1⁄4" combo mic input •Two band rotary mic EQ and
volume controls •Talk over feature •BNC lamp port •1⁄4"
headphone input •Six digital FX: Scratch, H20, applause,
copter, glass and scream •Echo section with repeat, delay,
volume and speed rotary controls •Rotary master volume
control •Master/mic one assignable echo switch
•Mfr. #MM-2400
The Atlas PA702 pole mount
amplifier is perfect for video
projector installations requiring
the powering of local
speaker
systems.
The unique
installation
involves a 1.5"
diameter mounting hole, right in
the center of the chassis. This
allows easy, low profile
mounting, directly above the
projector. Selectable current or audio sensing allows
this unit to operate in a fully automatic mode, providing
connect-then-forget convenience. Features: •Balanced
phoenix style inputs •Unbalanced RCA line inputs •Front
panel status LEDs •Recessed screwdriver adjustable tone
and level controls Specifications: •Power output: 70W
RMS two channels, with 1% THD •Frequency response:
30Hz~20KHz ±3dB •Dimensions: 13⁄4" (H) x 81⁄2" (W) x
111⁄2" (D) •Model #PA702
Order #
555-11360
Order #
555-11265
Order #
555-9225
Order #
555-11355
ONLY
$129.99
Rackmounted
Digital Recorder
NEW!
ONLY
$199.99
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Rackmount Four Channel FX Mixer
ONLY
$199.99
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$239.00
page
71
4
The iConnex is a plug and
play USB powered sound card
that coupled with your favorite recording
or DJ software allows you to add extra outputs for
recording, as well as a phono/turntable input for
transferring your old vinyl, tape or CD collection in one
easy step. Features: •Phono input with grounding screw
•16 bit/48KHz AD/DA convertor •Switched line or phono
input •Rotary volume control •RCA output •USB bus
powered •Audacity recording software and USB cable
included •Windows and MAC compatible
Section
Section
4
Professional Audio
Tube Mic
Preamp
w/USB Output
4
#555-3146
Five Zone
Distribution Mixer
Professional
quality audio interface
allows connection of mic,
instrument, and line level signals
to standard line level inputs as well as USB computer
inputs. Features: •USB output •Stackable extruded
aluminum chassis •Precision LED level metering circuitry
•Ultra low noise discrete microphone preamp front end
handles a wide range of input signal levels •High
impedance 1⁄4” instrument input •High-quality 12AX7A
tube •Switch selectable high-pass filter removes very low
frequency rumble and wind noise •48V phantom power is
available •Phase invert switch •Up to 70dB of gain •Fast
FET limiter to prevent overload •Switch selectable input
impedance •Variable input and output level controls
•Requires 10VAC, 700mA •AC adapter included
•Dimensions: 1.75" (H) x 5.9" (W) x 6.5" (D)
•Model #TUBE-MPPSUSB
Order #
555-8432
ONLY
$99.49
Order #Mfr. #
555-8410
405
ONLY
$185.00
Six Channel
Headphone Amplifier
Perfect for small studios, stage production and education
use, this headphone amplifier accepts two stereo sources
and provides independent level control to six headphone
outputs. Features: •Master L/R pan control •Master
stereo/mono mode selector •Stereo inserts for each
headphone output •Compact 1RU rack mount chassis
is only 6" deep •All connections are 1⁄4" stereo female
Order #Model
555-8415
406
ONLY
$145.00
Considered the world’s
most popular external
microphone preamp, the
TUBE-MP utilizes a
hand picked 12AX7
preamplifier tube, to add warmth and fatness to a signal
while maintaining exceptionally low noise and high
quality. Designed for use with a microphone, the TUBEMP also functions as an exceptional direct box, impedance
matching, amplifying and improving the sound of any
device plugged into it. Features: •48V Phantom power
output •Phase reverse •Variable input and output gain
controls •Balanced XLR and 1⁄4” inputs and outputs
•Portable, all steel construction Specifications:
•Frequency response: 10Hz~20KHz •Dynamic range:
>100dB (20Hz ~ 20KHz) •THD: <0.1% •Dimensions:
2" (H) x 5.5" (W) x 5" (D) •Power requirements:
9VAC, AC adapter included
ONLY
$49.99
The Model 418 mixer provides eight mono channels of
mic/line mixing to a single channel balanced output. AUX
bus in and out jacks allow two 418 mixers to be connected
together for control of 16 total input channels. Each input
features: •Balanced XLR mic or unbalanced 1⁄4" line input
•Independent level and tone controls •Switchable 12VDC
phantom power •Each unbalanced line input may be
converted individually to line output with simple internal
jumper change •Compact rack mount chassis is 1 RU high,
and only 6" deep
Order #Model
555-8425
418
ONLY
$185.00
NEW!
Eight Channel
Microphone Splitter
The ART S8 can be used to split eight balanced low
impedance microphone signals into sixteen balanced low
impedance microphone signals (eight pairs). Each channel
of the S8 provides one direct output and one transformer
isolated output from a single microphone. Features: •Ideal
solution for splitting microphone sources to feed multiple
mixing consoles •Passes phantom power from main mixer
•Individual ground lift on each channel •Individual pad
switch on each channel
page
72
Available in single or two-channel versions, these feature
packed equalizers offer total control of 31 frequency bands
from 20Hz~20KHz. Each band provides 20mm slides,
switchable 6dB or 12dB of boost or cut, for precise
tonal control. Adjustable high and low pass filter
allow additional control for removing noise and
rumble. Features: •Adjustable 10Hz~250Hz low cut
filter •Adjustable 3KHz~40KHz high cut filter •Active
balanced and unbalanced inputs and outputs •XLR, 1⁄4"
TRS and RCA type phono connections •Wide adjustable
range is compatible with consumer and pro gear •LED
clip level indicators •Ground-lift switch •Independent
bypass switch on each channel •Rugged all-steel rack
mount construction requires only 1RU height (two-channel
occupies 2RU) Specifications: •Frequency response:
20Hz~20KHz ±0.5dB •Channel separation: >50dB
•S/N ratio: 94dB •THD: <0.01% •Power requirements:
95~130VAC, 50Hz/60Hz
Order #Model Dimensions
ONLY
555-3146 351
1.75" (H) x 19" (W) x 8.5" (D) $115.00
555-3147 355
3.5" (H) x 19" (W) x 8.5" (D)
194.11
ONLY
$229.00
15-Band Two-Channel
Equalizer
Feature packed 2/3 octave equalizer offers total control of
15 frequency bands from 20Hz~20KHz, on two channels.
Each band provides 20mm slides, switchable 6dB or 12dB
of boost or cut, for precise tonal control. Features:
•Active balanced and unbalanced inputs and outputs
•XLR, 1⁄4" TRS and RCA type phono connections •Wide
adjustable range is compatible with consumer and pro
gear •LED clip level indicators •Ground-lift switch
•Independent bypass switch on each channel •Rugged allsteel rack mount construction requires only 1RU height
Specifications: •Frequency response: 20Hz~20KHz
±0.5dB •Channel separation: >50dB •S/N ratio: 94dB
•THD: <0.01% •Power requirements: 95~130VAC,
50Hz/60Hz •Dimensions: 1.75" (H) x 19" (W) x 8.5" (D)
Order #Model
555-3145
341
ONLY
$109.00
Front
Eight– Channel
Ground Loop Isolator
Back
The de-esser improves audio quality by removing “S”
from vocals and sibilance from overly bright signal
sources such as cymbals. Extensive metering includes
input/output, gain reduction, de-esser level, gate open/
close and limit. Specifications: •Frequency response:
10Hz~20KHz •Dynamic range: 116dBu (un-weighted)
•THD: 0.008% (effect out), 0.016% (effect in) •Max input
level: +21dBu •Max output level: +21dBu •Detailed
specifications available upon request •Model #S-Com Plus
Order #
555-6556
Order #Model #
555-7687
T8
ONLY
$149.00
Two Channel 31 Band Equalizer
Feature packed 1/3 octave equalizer offers total control
of 31 frequency bands from 20Hz~20KHz. Constant Q
circuitry ensures that bandwidth of the selected frequency
stays the same, even when approaching the maximum
boost or attenuation. The gain/boost range may be set at
±6dB, or ±12dB for added flexibility and precision. Cut–
Only mode allows 0~12dB attenuation with full slider
range. Features: •Variable low cut filter from
15Hz~200Hz •Electronically balanced XLR and 1⁄4" TRS
inputs and outputs •Relay controlled bypass switch, with
LED indicators •Center LED marker on each frequency
fader •Eight segment LED bargraph VU meter •Relay
power on circuitry to prevent speaker thumps •All steel,
rack mount chassis
31-Band Single-Channel 1⁄3
Octave Equalizer
Passive audio isolator utilizes eight high quality
transformers to separate input and output signal
grounds, thus reducing hum and ground-loop noise. The
transformers have flat and wide frequency response and
handle high signal levels while maintaining an isolated
balanced output. Each is wound 1:1, for unity gain
and are designed to be used with impedances from
600~100,000ohm. It fits easily into virtually any audio
system and is a clean patch point between all types of
equipment, providing balanced XLR, 1⁄4" phone, and
RCA type phono connections on all inputs and outputs.
The mounting ears are reversible, allowing the XLR
connections on the front or the 1⁄4" and RCA phono jacks on
the front. Completely passive design requires no power and
occupies only one rack space. Specifications: •Frequency
response: 10Hz ~50KHz •THD: .01% •Channel separation
90dB •Phase error: <5°, 20Hz~20KHz •Insertion loss:
0.4dB @ 100Kohm, 5.5dB @ 600ohm •Dimensions:
1.75" (H) x 19" (W) x 3.75" (D)
Order #
555-10515
Order #
555-7545
#555-3147
Eight Channel
Personal Mixer w/EQ
TUBE-MP
Microphone
Preamplifier
Order #
555-3160
The model 405 mixer distributes two stereo sources
to each of five output zones, with individual control
at each zone. Each input zone handles separate left and
right balanced line level signal. Each output zone features
independent level control from input one and two, stereo/
mono selector with mono indicator and clip and signal
LEDs for each input. Compact rack mount chassis is
1RU high, and only 6" deep. All input and outputs are
balanced XLR.
3
year limited
warranty
S-Com Plus Dual Channel Signal Processor
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$149.00
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$149.00
NEW!
NEW!
Professional Audio
Section
NEW!
Two Channel Tube
Microphone Preamplifier
Order #
555-10505
ONLY
$299.00
NEW!
Two Channel
Vactrol-Based Compressor
The ProVLA II is a tube driven Vactrol®-based
compressor/leveling amplifier designed to excel in any
professional audio environment. Superior performance and
an incredible tone makes the ProVLA II an indispensable
tool for tracking, mixing, mastering, dynamic control of
live sound sources or for use in broadcast audio. Features:
•Variable threshold, ratio and output controls •LED
metering indicates both average level and peak hold
•Accurate ten segment LED gain reduction metering
•Active balanced XLR and ¼" inputs and outputs
Specifications: •Frequency response: 10Hz~100KHz
(±.5dB) •Dynamic range: >100dB •THD: <0.1%
•Dimensions: 3.5" (H) x 19" (W) x 8.75" (D)
Order #
555-10510
ONLY
$299.00
NEW!
Tube Preamplifier System
Designed as the ideal preamp
for any application, the tube driven TPS II adds warmth
and texture to any audio source. This two-channel high
performance preamp uses a pair of hand selected 12AX7A
tubes in the low noise input circuitry. This, coupled with
ART’s proprietary V3™ (Variable Valve Voicing) and
variable input impedance allows the TPS II to deliver
incredible performance. Features: •Variable input
impedance •Improved V3 variable valve voicing presets
•LED input meter with analog output meter •Wide
frequency response 5Hz~50KHz •Automatically switches
between instrument and microphone preamp •Enhanced
OPL™ output protection limiter
Order #
555-10520
ONLY
$185.00
NEW!
Tube Preamplifier System
The Tube PAC from ART is a combination of the world’s
most popular tube mic/line preamplifier and optical tube
compressor. Features: •Combination tube mic/line
preamplifier and tube compressor •Two hand-selected
12AX7A vacuum tubes •Precision potentiometers
•+48V phantom power •Bypassable compressor circuitry
•Balanced XLR and unbalanced 1⁄4" inputs and outputs
•Internal transformer Specifications: •Frequency response:
20Hz ~20KHz •Dynamic range: >90dB •THD: <0.1%
Order #
555-10530
ONLY
$129.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
The Tube MP Studio
V3 delivers warmth
and fatness to any
audio source while
maintaining an
exceptionally low-noise
signal path. While its
primary function is as a
microphone preamp with +48V phantom power, variable
gain and phase reverse switching, the Tube MP is also
an exceptionally versatile tube driven direct box for any
instrument source. Features: •+48V of Phantom Power
•Hand selected 12AX7A tube •Variable input and
output gain controls •XLR and 1⁄4" inputs and outputs
Specifications: •Frequency response: 10Hz~20KHz
(±1dB) •Dynamic range: >100dB (20Hz~20KHz)
•THD: <0.1% •Dimensions: 2" (H) x 5.5" (W) x 5" (D)
Order #
555-10500
Six Channel
Headphone Amplifier
The Art HeadAmp 6 PRO is a six channel stereo
headphone amplifier that includes a six channel auxiliary
input section. Features: •Separate bass, treble, balance,
and level controls •Front and rear panel 1⁄4" output jacks
•XLR and ¼" balanced inputs •Operates in stereo and
mono •Auxiliary front mounted separate source input
•LED level indicators on all channels
Order #
555-10525
ONLY
$199.00
ONLY
$75.49
Microphone
Splitter/Combiner
NEW!
Pro Channel Microphone Preamp,
Compressor, and Equalizer
ART engineers have combined the world-renowned
Pro MPA, Pro VLA, and Tube EQ into a single product,
creating the world’s best-sounding and most affordable
professional recording channel. Features: •Selectable VU
metering (mic pre out, compressor out, or main out) •Tube
character and gain reduction LED arrays •Balanced XLR
and unbalanced 1⁄4" inputs and outputs Specifications:
•Frequency response: 10Hz~20KHz •Dynamic range:
>100dB •THD: <0.1%
Order #
555-10535
NEW!
The ART VoiceChannel is the perfect complete channel
input strip for recording, broadcast or high profile live
applications where maximum performance and detail is
required. The VoiceChannel combines a single Class-A
tube mic preamp, full-featured dynamics control, de-esser,
expander and semi-parametric EQ into one unit with
analog and digital output as well as the ability to direct
connect to any computer or laptop via integrated USB port.
Features: •Fully featured tube microphone preamplifier
with selectable plate voltage and variable input impedance
•Powerful parametric EQ selectable pre or post compressor
in signal path •Flexible digital connectivity including
ADAT lite-pipe/AES/EBU/S/PDIF/TOSLink digital output
supports 44.1~192KHz sample rates •USB direct-connect
to computer or laptop •See MCMelectronics.com for
detailed specifications
Order #
555-10540
The ART SPLITCom Pro can be used to split or combine
balanced low impedance microphone signals. Features:
•Low distortion with wide frequency response •Phase
inverter switch for subtractive combining •Galvanic
isolation to block phantom-power between channels
•Ground lift switch to reduce noise due to ground loops
Order #
555-10545
ONLY
$429.00
ONLY
$35.49
NEW!
ONLY
$319.00
Microphone Preamplifier with Digital Outputs
NEW!
Transformer Isolated
Microphone Splitter
The ProSplit provides one direct output and one
transformer isolated output from a single microphone.
Features: •Ground-lift switch on isolated output to reduce
noise due to ground loops •Attenuator pad switch on the
input that can be used to alternately connect a preamplified
(line-level) signal to the two microphone-level outputs
Order #
555-10547
ONLY
$50.00
DTI Dual
Channel
Ground
Loop
Isolator
The DTI™ is a
high quality, passive
solution to ground loop hum.
Dual, high quality isolation transformers provide ground
path isolation between components, while maintaining full
frequency response. Features: •Virtually indestructible,
extruded aluminum enclosure •1⁄4" TRS, XLR and RCA
input and output connection pairs, supporting balanced
or unbalanced lines •Two independent channels for
correcting two ground loops, or for processing a
stereo signal Specifications: •Frequency response:
10Hz~50KHz, ±0.5dB @ +4dBu •THD: 0.01% typical @
1KHz, +18dBu •Insertion loss: 0.4dB @ 100Kohm load,
5.5dB @ 600ohm load •Dimensions: 1.75" (H) x 4.2" (W)
x 3.5" (D) •Passive device, requires no power
Order #
555-7685
MCMelectronics.com
Email: quotes@MCMelectronics.com
Model
DTI
ONLY
$55.99
page
73
4
Features: The ART ProMPA II is the next generation
in affordable high-performance microphone preamp
technology. Each microphone input circuit, with selectable
48V phantom power, features variable input impedance.
The ProMPA II can be configured for dual mono or stereo
operation with selectable mid/side mic support, summing
the adjacent channel, to decode left/right signals.
Features: •Hand selected 12A x 7A tube •Variable
input impedance •XLR and 1⁄4" inputs and outputs
Specifications: •Frequency response: 15Hz~120KHz (+0,
-1dB) •Dynamic range: >110dB (“A” weighted) •THD:
<0.005% •Dimensions: 3.5" (H) x 19" (W) x 8.75" (D)
Tube MP Studio
V3 Preamplifier
4
Section
4
Professional Audio
CleanBOX II Ground
Loop Isolator
4
Balanced/Unbalanced Line Level Convertor
Two-way, stereo convertor provides total flexibility when
interfacing consumer and professional audio equipment.
Perfect when using tape decks, mp3 players, computer
sound cards with mixing consoles, sound processors,
professional preamplifiers and amplifiers. Two stereo
channels simultaneously match balanced to unbalanced,
and unbalanced to balanced equipment. Stereo Channel
1: L/R balanced female XLR inputs to L/R unbalanced
RCA female outputs. Stereo Channel 2: L/R unbalanced
RCA female inputs to L/R balanced male XLR outputs.
Each stereo channel has its own level adjustment to
compensate for line level differences between pro
and consumer gear. Specifications: •Max output gain:
+18dB balanced, +12dB unbalanced •Max input level:
+22dB balanced and unbalanced •Power requirements:
12VDC, AC adapter included •Dimensions: 13⁄4" (H) x
55⁄8" (W) x 35⁄8" (D)
Order #
555-8485
MSRP
$59.95
(1-3)
$42.99
(4-up)
$37.95
Four Output Headphone Amplifier
Perfect in small studio recording, education,
home theater applications, or anywhere that multiple
headphones must be driven. Single 1⁄4" stereo input accepts
signal from line level source or headphone jack. Four 1⁄4"
headphone outputs each have individual level controls.
Specifications: •Max input level: +14dBv •Max output
gain: 20dB per channel •Input impedance: 100KΩ per
channel •S/N ratio: 90dB •THD: <0.008% •Power
requirements: 12VDC, includes AC adapter
•Dimensions: 15⁄8" (H) x 41⁄2" (W) x 27⁄8" (D)
Order #
555-8480
MSRP
$59.95
(1-3)
$42.99
(4-up)
$37.95
Two-Way Crossover
with Subwoofer Output
Ground loop
problems commonly
occur when multiple
audio components are
interconnected, with differing
ground sources. Normally, this
problem manifests itself as 60Hz hum
(or some higher harmonic) in the audio
system. The CleanBOX II is a passive
device, which features two independent channels, with
transformer isolation between the inputs and outputs, for
virtually no signal degradation. In/output connections are
1
⁄4" TRS, and will accept balanced or unbalanced signals.
Specifications: •Frequency response: 10Hz~50KHz
•THD: 0.01% typical •Insertion loss: 4dB (100Kohm
load) •Dimensions: 2.9" (H) x 4.5" (W) x 1.5" (D)
Order #
555-2707
ONLY
$38.99
MyMONITOR
Personal
Monitor Mixer
Personal mixer/
headphone amplifier
accepts stereo line
level input, mixes it with
a balanced mic input, and
provides stereo headphone output.
Parallel “Thru Mic” output allows easy
insertion into existing PA system. This is
ideal for studio or stage use, where a performer desires
to hear his microphone, combined with the overall mix,
through headphones. Independent level controls for the
line and mic in allow easy mix adjustment. Thru Mic
output will pass phantom power, and is unaffected by
mix settings. Specifications: •Line input: 1⁄4" stereo
(TRS) •Mic input: XLR female •Mic output: XLR
male •Headphone output (2): 1⁄4" stereo •Max input
level: -20dB (mic), 40dB (line level) •Output
impedance: 10ohm •Gain: 15dB (line level),
50dB (mic) •S/N ratio: 90dB •Power requirements:
12VDC, AC adapter included, or 9V alkaline battery
•Dimensions: 4.5" (H) x 2.75" (W) x 1.5" (D)
Order #
555-2735
CleanBOX Balanced/
Unbalanced
Convertor
Two–way, stereo
convertor provides total
flexibility when interfacing
consumer and professional audio
equipment. Perfect when using tape
decks, mp3 players, computer sound cards
with mixing consoles, sound processors, professional
preamplifiers and amplifiers. Two stereo channels
simultaneously match balanced to unbalanced, and
unbalanced to balanced equipment. Stereo Channel 1:
L/R unbalanced RCA female inputs to L/R balanced male
XLR outputs Stereo Channel 2: L/R balanced female
XLR inputs to L/R unbalanced RCA female outputs. Each
stereo channel has its own level adjustment to compensate
for line level differences between pro and consumer gear.
Specifications: •Max output level: +18dB balanced,
+12dB unbalanced •Max input level: +22dB balanced
and unbalanced •Input gain: -8dB balanced, +20dB
unbalanced •Power requirements: 12VDC, AC
adapter included •Dimensions: 4.625" (H) x
5.625" (W) x 1.75" (D)
Order #
555-2705
ONLY
$65.49
Balanced/
Unbalanced
Convertor
ONLY
$70.00
Balanced Audio
Ground Loop Isolator
Part of the BLOX series,
this compact adapter provides
ground loop isolation on XLR
type balanced lines. Features: •Allows signal and ground
isolation while retaining 600ohm source and load
impedance •Rugged extruded housing •XLR male to
female connection •Frequency response: 15Hz~60KHz
±0.05dB •Insertion loss: 1dB nominal •Maximum input
level: +2dBm (1.3V)
Order#
555-8460
Mfr. #
ISOBLOX
ONLY
$28.99
Headphone
Amplifier
Part of the S-Mini
Series, this compact
amplifier is housed
in a rugged, extruded
housing, accepts a line
level source, and provides four, individually controlled
headphone outputs. It is perfect for the studio, as well as
educational environments. Features: •1⁄4" stereo input
•Four 1⁄4" stereo outputs •Individual level control for
each headphone •Includes 18VAC DC adapter
Order 555-7570
Model S-Amp
ONLY
$49.49
Precision two-way crossover is ideal when an active
subwoofer is required in a sound reinforcement system.
Single-channel unit provides separate high and low pass
outputs, plus a separate subwoofer out. Features: •24dB/
octave Linkwitz-Riley crossover on high and low level
outputs •12dB/octave Butterworth crossover on subwoofer
output •Independent high, low and sub out level controls
•Switchable 30Hz low-cut filter on all three outputs
•Active balanced XLR and 1⁄4" TRS in/out connections
•Clipping indicators on all outputs •Rugged all-steel
rack mount construction requires only 1RU height
Specifications: •Crossover frequency range:
250Hz~6KHz •Subwoofer crossover frequency range:
50Hz~250Hz •Dynamic range: 114dB •Frequency
response: 10Hz~40KHz ±1.5dB •S/N ratio: 95dB •THD:
<0.01% (20Hz~20KHz) •Power requirements: 110VAC,
60Hz •Dimensions: 1.75" (H) x 19" (W) x 5.5" (D)
Part of the
S-Mini Series,
this compact
convertor
provides the
proper
interface
between
consumer
unbalanced line level, and commercial balanced line level
equipment. Perfect when using tape decks, mp3 players,
computer sound cards with mixing consoles, sound
processors, professional preamplifiers and amplifiers.
Stereo channel 1: L/R unbalanced RCA female inputs to
L/R balanced male XLR outputs Channel 2: L/R balanced
female XLR inputs to L/R unbalanced RCA female
outputs. Each stereo channel has its own level adjustment
to compensate for line level differences between pro and
consumer gear. Includes 18VDC AC adapter.
This amplifier
is ideal when
multiple headphones need
to be driven from one output.
This unit features four individual
headphone outputs, with both 1⁄4" and 3.5mm outputs, and
their own level control. Input accepts either size connector
as well. The HeadAmp4 will connect to virtually any
source, and drive any headphone configuration including
studio phones, in-ear monitors or custom ear pieces
or any combination of the above. Features: •Requires
12VDC, AC adapter included •Dimensions: 3.75" (H) x
2.875" (W) x 1.5" (D)
Order #
555-3141
Order #
555-7574
Order #
555-2722
page
74
Model
311
ONLY
$108.42
Model
S–Convert
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$49.49
HeadAMP4
Headphone
Amplifier
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$55.99
Professional Audio
MacroMIX Four
Channel Personal Mixer
Order #
555-2725
ONLY
$59.99
ProMIX Three
Channel Mic Mixer
Perfect when up to three
microphones must be used, and only
one mic input is unavailable. The unit
features three balanced XLR female mic
inputs, each with independent level control, switchable
phantom power and switchable 3dB cut at 100Hz.
Transformer balanced output is provided via an XLR make
connector. An isolated headphone output is also provided
for local monitoring. Requires 18VDC; Two alkaline
9V batteries (#292-035), not included, or supplied 18V
adapter. Specifications: •Phantom power output:
12VDC •In/output impedance: 600ohm •THD: <0.02%
•Max output level: +14dB •Max input level: -14dB
•Maximum gain: +60dB •Dimensions: 5.625" (H) x
3.75" (W) x 1.75" (D)
Order #
555-2770
Phantom II Dual
Phantom Power Supply
Switchable 12V/48V supply
externally provides phantom power to
two microphones. Ideal when high
quality condenser microphones are used
with equipment not supplying phantom power.
Specifications: •Input connections: Female
XLR (2) •Output connections: Male XLR (2)
•Power requirements: Supplied 12VDC adapter
or two 9V alkaline batteries •Dimensions:
5.625" (H) x 3.625" (W) x 1.75" (D)
Order #
555-2745
#555-3155
PowerMIX III Three
Channel Personal Mixer
This personal mixer accepts signals
from up to three individual stereo line
level sources, and provides a single,
stereo output. Additionally, two stereo headphone outputs
are provided for local monitoring. Each input consists
of separate left and right 1⁄4" jacks. Each channel has an
independent level control, plus a L/R pan control if mono
inputs are used. Master level control controls the mixed
output level, and a single control sets the level for both
headphone outputs. Specifications: •Input impedance:
10Kohm •Output impedance: 100ohm •Max gain:
+27dB •Max input level: +30dB •THD: <0.005% •Power
requirements: 12VDC, AC adapter supplied •Dimensions:
5.625" (H) x 3.75" (W) x 1.75" (D)
Order #
555-2765
ONLY
$95.49
Project Series Tube
Microphone
Preamplifier
Considered the world’s
most popular external microphone preamp, the
TUBE–MP utilizes a hand picked 12AX7 preamplifier
tube, to add warmth and fatness to a signal while
maintaining exceptionally low noise and high quality.
Designed for use with a microphone, it also functions as
an exceptional direct box, impedance matching,
amplifying and improving the sound of any device
plugged into it. Features: •Extremely low noise discrete
front end •Up to 70dB of clean, musical gain •High output
signal drive capability •Selectable input impedance
•Switchable 48V phantom power •Switchable FET limiter
•XLR and 1⁄4" inputs and outputs •Phase invert selector
•High cut selector •Variable input and output controls
Specifications: •Frequency response: 10Hz~40KHz
•Dynamic range: >100dB (20Hz~20KHz) •THD: <0.05%
•Dimensions: 1.75" (H) x 5.9" (W) x 6.5" (D) •Power
requirements: 10VAC, AC adapter included
Order #
555-8430
ONLY
$65.49
ONLY
$89.49
NEW!
Available in single or dual channel, these roadworthy
boxes provide balanced signal to the mixing console input,
from virtually any sound source. Easily connect electric
guitar or bass pick-up, keyboard or other unbalanced line
level source, or post-amplifier speaker level signal, to a
mixing consoles balanced input. Provided feed-through
output enables instrument or sound source to remain
connected to its own individual amplifier, while
simultaneously patching it to a mixer. Features: •50Kohm
1
⁄4" unbalanced input •50Kohm 1⁄4" unbalanced feedthrough
output •Selectable input attenuation (0dB, -20dB, -40dB)
•600ohm balanced XLR output •Switchable output ground
lift switch •Housed in a rugged steel enclosure •Passive
device, requires no power
Order #
555-3155
555-3156
Model
PDB
dPDB
Channels
Single
Dual
ONLY
$35.49
48.49
Z-Direct Passive
Direct Box
The USB Dual
Pre is a full-featured high-quality dual
portable preamplifier and computer interface packed into
a compact rugged case. It is designed to work over a wide
variety of applications from remote field recording to
desktop/studio tracking. Features: •USB connectivity
•Low noise fully balanced XLR and 1⁄4" TRS combo inputs
•Up to +48dB of clean gain •Built-in low noise 48V
phantom power supply •Latency free monitoring •Mix and
level controls •Independent channel gain controls •1⁄4" TRS
balanced monitor and 3.5mm headphone monitor outputs
•Flexible 3-way power from USB, included external
supply, or 9V battery Includes: •Audacity recording
and production software •USB cable •Compatible
with Windows XP/Vista and Apple OS 9.1/OSX
•Mfr. #USBDUALPRE
Order #
555-4900
Order #
555-7675
ONLY
$79.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
ONLY
$78.99
#555-3156
PDB Series
Passive Direct Boxes
High-quality passive
interface lets you connect
instrument, line, or speaker
level signals to a mixer or other
balanced input. High impedance, single-ended
(unbalanced) 1⁄4" input is converted into an isolated,
balanced low impedance signal source. The internal
audio transformer has extremely flat and wide frequency
response and can handle high signal levels. Inputattenuator switches allow selection of 0dB, -20dB or
-40dB for a wide range of signal levels and the input-thru
jack allows tapping off of the signal chain. The ground-lift
switch separates input and output signal grounds to isolate
two systems, reducing hum and ground-loop noise.
Additional features: •Switchable 30KHz low-pass
bessel filter to cut out high frequency RF and electrical
interference •Phase invert switch •Compact black
anodized aluminum case Specifications: •Frequency
response: 10Hz~50KHz •THD: 0.01% •Input and inputthru connection: 1⁄4" unbalanced, 50Kohm •Output
connection: XLR male, 600ohm •Dimensions:
1.75" (H) x 4.2" (W) x 3.5" (D)
Stereo
Microphone
Preamp
with USB
4
Model
Z-Direct
ONLY
$25.49
X-Direct Active
Direct Box
High-quality active interface
lets you connect instrument, line,
or speaker level signals to a mixer or
other balanced input. High impedance, single-ended
(unbalanced) 1⁄4" input is buffered and converted, by very
low noise active electronics, into an isolated, balanced low
impedance signal source. The X-direct has extremely flat
and wide frequency response and can handle high signal
levels while still maintaining an isolated balanced low
impedance output. Input-attenuator switches allow
selection of 0dB, -20dB or -40dB for a wide range of
signal levels and the input-thru jack allows tapping off of
the signal chain. The ground-lift switch separates input
and output signal grounds to isolate two systems, reducing
hum and ground-loop noise. Additional features:
•Switchable 30KHz low-pass bessel filter to cut out high
frequency RF and electrical interference •Phase invert
switch •Compact black anodized aluminum case •9V
battery or phantom powered (auto sensing) operation
Specifications: •Frequency response: 10Hz~100KHz
•THD: <0.05% •Maximum output level: +6dBu,
+14dBu (phantom powered) •Maximum input level:
+4/+24/+44dBu •Dynamic range: >100dB typical •Input
and input-thru connection: 1⁄4" unbalanced, 50Kohm
•Output connection: XLR male, 600ohm •Dimensions:
1.75" (H) x 4.2" (W) x 3.5" (D)
Order #
555-7680
Model
X-Direct
ONLY
$34.99
AVDirect MultiInput Direct Box
Ideal in applications where
iPods, laptops, consumer DVD
players, or home theater components
need to be connected to a single XLR mic
level input. This unit will accept virtually any input
connection and level, including amplified speaker outputs,
and provides balanced XLR mic level output. Features:
•L/R RCA line inputs •3.5mm and 1⁄4" stereo line level
inputs •1⁄4" and push terminal speaker level inputs
•Switchable 4.8KHz high cut filter •Ground lift switch
•Variable level control •Full 20Hz~20KHz frequency
response •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order #
555-7677
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$55.49
page
75
4
Compact active mixer combines up
to four line level sources and provides
line level output. Input CH1 and CH2
have dual mono summed RCA female inputs. Input CH3
accepts either dual mono summed RCA, or 1⁄4" mono input.
Input CH4 accepts 1⁄4" mono input. Outputs include dual
mono RCA line level, and 1⁄4" mono which may be used
as line level or headphone. Each input channel has its
own independent level control. Specifications: •Input
impedance: 10Kohm •Max gain: 40dB •S/N ratio: >90dB
•THD: 0.008% •Power requirements: 12VDC, adapter
included •Dimensions: 5.625" (H) x 3.75" (W) x 1.75" (D)
Section
Section
4
Professional Audio
Portable Stereo
Digital Recorder
4
Unbalanced to Balanced
Convertor w/Attenuator
Part of the BLOX series, this compact adapter
combines the L/R line level audio signal from
standard consumer audio equipment, and
converts it to an XLR balanced mic level output.
Additonally, a variable attenuator allows control
of the output volume level. Features: •Rugged extruded
housing •Dual RCA male input connections •XLR male
output •Input impedance: 8Kohm •Output impedance:
580ohm •Max input level: +24dBm (3.3V) •Nominal
attenuation: 24dB •Mfr. #TDIBLOX
Order#
555-8466
ONLY
$34.99
Balanced to
Unbalanced Convertor
Part of the BLOX series, this compact adapter converts
an XLR balanced line level signal to unbalanced 1⁄4".
Features: •Rugged extruded housing •XLR female
low impedance input •1⁄4" female high impedance
output •Mfr. #DBBLOXF
Order #
555-8464
ONLY
$16.99
Part of the BLOX series, this
compact adapter provides 0dB
to full attenuation of an XLR
type balanced line. Additionally, the rotary knob may be
pulled up for pop–free muting. Features: •Rugged
extruded housing •XLR male to female connection
•Maximum input level: +24dBm (3.6V)
•Mfr. #CVPBLOX
ONLY
$32.99
Unbalanced to
Balanced Convertor
Part of the BLOX series,
this compact adapter
converts a 1⁄4" unbalanced line level signal to balanced
XLR. Features: •Rugged extruded housing •1⁄4" female
high impedance input •XLR male low impedance output
•Mfr. #DBBLOX
Order#
555-8468
Single in–line power supply provides up to 13.5VDC
of phantom power at 100mA. Perfect for powering
condenser microphones and phantom powered direct
boxes. Features: •Rugged extruded housing •Compact
size •Included AC adapter •Mfr. #PPSBLOX
page
76
This professional stereo
turntable features a high-torque
belt-driven motor for quick
NEW!
start-ups and is available as
either a standard turntable,
or a turntable with a
USB output that
connects directly
to your computer.
Features:
•Selectable 33½ and 45rpm
speeds •Professional cast aluminum
platter •Integral dual magnet phono cartridge with
replaceable stylus •Damped lift/cueing mechanism
with front panel control •Switchable built-in pre-amplifier
with line-level RCA output cables •USB model includes
Audacity software •Compatible with PC and MAC
•Mfr. #AT-LP60
Order #
555-10650
555-10655
ONLY
$44.99
Perfect for any occasion, the Q3 Handy
Video Recorder combines spectacular
audio recording capabilities with a video
camera. Typical flip style video cameras
on the market suffer when it comes to
sound quality, but that is not the case
with the Q3. Features: •Built-in stereo
condenser microphones with X/Y
configuration for true stereo imaging
•Get up to 1 hour of video with bundled
2Gb SD card •Accepts up to a 32Gb
NEW! SDHC card for 16 hours of recording time
•2.4" LCD display with a resolution of
320 x 240 •Video resolution of 640 x 480 at 30 fps •Auto
record level automatically adjusts audio levels during
recordings Specifications: •Video format: MPEG-4
•Audio formats with video include 44.1/48KHz 16/24 bit
linear PCM WAV or mp3 up to 320kbps •Audio only
formats include 96KHz 16/24 bit linear PCM WAV
•Uses two standard “AA” batteries or NiMH rechargeable
batteries •USB 2.0 with built-in cable •Windows and
Mac OS compatible •Built-in speaker and tripod mount
Includes: On-board editing software, YouTube uploader
software, A/V cable, carrying case, windscreen, 2Gb SD
card, and two "AA" batteries •Mfr. #Q3
Order #
555-10250
Description
Turntable
USB turntable
USB Direct-Drive
Professional
Turntable
This professional
stereo turntable
features a high-torque
direct-drive motor for
quick start-ups and a USB
NEW!
output that connects directly
to your computer. Features:
•Direct drive high-torque motor •Selectable 33/45/78rmp
speeds •Professional-cast aluminum platter with slip mat
•Integral dual magnet phono cartridge with replaceable
stylus •Balanced tone arm with soft damping control
•Switchable built-in pre-amplifier with line-level RCA
output cables •Forward and reverse play •Includes
Audacity software •Compatible with PC and MAC
•Mfr. #AT-LP120USB
Order #
555-10660
ONLY
$79.99
109.00
In–Line Fixed
Attenuators
Compact in–line attenuators are essential for correcting
problems caused by excessive signal in balanced lines.
Stage technicians can greatly benefit from keeping an
assortment of these units handy to solve unforeseen level
issues in the field. Features: •Rugged extruded housing
•Compact size •560ohm nominal impedance •Traditional
“H” type configuration •XLR male to female connection
•Functions in either direction •Max input level
+24dBm (3.6V)
Order #
555-8472
555-8474
555-8476
555-8478
Mfr. #
PADBLOX-10
PADBLOX-20
PADBLOX-30
PADBLOX-50
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$249.00
ONLY
$299.00
ONLY
$17.99
Phantom
Power Supplies
Order#
555-8470
Order #
555-10240
Belt-Driven
Professional Turntable
In-Line Variable
Attenuator
Order#
555-8462
Representing the next level
of professional recording
performance, the H4n
Handy Recorder delivers
superior audio quality and
dramatically improves the
user experience. Zoom’s
most sophisticated hand
held recorder to date will
amaze, no matter the
application. Features:
•Four channel simultaneous
recording using built-in and
external mics •Digitally
controlled, high-quality
mic preamp for improved
audio quality •Large 1.9"
LCD screen •USB audio
interface capability •Mp3
NEW!
recording for increased
recording time •Built-in reference speaker to check
recordings •Records on SD/SDHC media of up to 32Gb
for maximum recording time •Stamina mode enables ten
hours of continuous battery life •XLR inputs with phantom
power allow recording with any mic •Hi-Z inputs for
recording guitar and bass •Studio effects onboard,
including guitar and bass amp modeling •Onboard tuner
and metronome Includes: •1Gb SD card, windscreen, mic
clip adapter, AC adapter, USB cable, protective case and
Cubase LE recording software •Mfr. #H4n
Digital Stereo
Audio/Video Recorder
Attenuation
10dB
20dB
30dB
50dB
ONLY
$15.99
15.99
17.99
15.99
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$299.00
Professional Audio
Section
4
Dual Digital Music Controller
✔Dual multi-function jog wheels with scratch effect mode
✔DJs can cue and manipulate files directly from
digital storage device
✔Connects directly to an iPod™,
stand alone hard drive or thumb drive
Order #
555-9310
ONLY
$279.00
NEW!
Digital Music Controller
Enhanced Dual Digital Music Controller
✔12 effect DSP module
✔5 on-board USB ports
✔Auto/manual Tap BPM counter key adjust and master tempo
Feature packed unit boasts an impressive collection of
advanced tools to meet the highest performance demands
of today's DJ. This model includes a 12 effect DSP
module, comprehensive loop editing, efficient sample
banks, touch sensitive jog wheel and 10 line high
resolution LCD display. Tempo controls: •BPM:
Manually tap out, or automatically detect BPM and save to
tracks ID3 tag for easy recall •Key adjust: Adjust key of a
track without changing tempo •Master tempo: Lock the
pitch of a track when changing tempo Features: •Full
CBR and VBR mp3 and WAV compatibility •Support for
various hard drive and flash based music players and
external CD/DVD ROM drives •Intelligent music database
management •Multiple search options •Seamless loop
playback •Adjustable on-the-fly looping •iPod™ playlist
compatibility •Dual four line 80 character LCD displays
•USB keyboard for search and navigation •Shuffle mode
•Variable pitch slider •Model #HDC-3000 •See complete
details at MCMelectronics.com.
Order #
555-9320
ONLY
$459.00
✔Organize and play music files directly from USB source
✔Connects directly to an iPod™, stand alone
hard drive or thumb drive
✔Perfect for whole house audio and commercial environments
Incredible rack mount controller is ideal for fixed
installation in clubs, lounges, restaurants, gyms and whole
house audio systems. Compact unit attaches directly to
stand alone hard drives, iPods™, thumb drives or any
other USB media, and provides balanced and unbalanced
stereo output. With front and rear USB ports, plus
connectivity option of up to four USB storage devices
(requires optional external USB hub), creating the ultimate
playlist has never been easier or more accessible. Whether
being installed in a residential or commercial environment,
this unit allows easy navigation of an entire music
library. Features: •Full CBR and VBR mp3 and
WAV compatibility •Support for various hard drive and
flash based music players and external CD/DVD ROM
drives •Intelligent music database management •Multiple
search options •iPod™ playlist compatibility •Four line
80 character LCD display •Search and navigation
capability with USB keyboard •Shuffle mode
•Variable pitch slider •Model #HDC-500
•See complete details at MCMelectronics.com.
Order #
555-9300
ONLY
$249.99
Rack Mount iPod®
Docking Stations
Two Input Stereo Mixer
USB/SD Card Player
Extremely compact device will allow
mp3 and WMA files to be directly played from USB or
SD memory. It is perfect for DJ use allowing SD cards or
thumb drives to store all of the music. Compact size and
low cost also makes this totally suitable for use as a music
source in any background music or whole-house audio
system. Features: •Attractive blue back lit display •Dot
matrix LCD display of elapsed track time, track number,
track tag and pitch setting •Rotary pitch adjustment ±24%
•Rotary control for track select •Pushbutton SD/USB
selector •Compact 1RU design is suitable for rack mount
or tabletop use •Front panel XLR mic input with level
control •3.5mm headphone jack with level control •Master
output level control •Unbalanced RCA and balanced XLR
stereo outputs •80~260V, 50~60Hz operation •Dimensions:
31⁄2" (H) x 19" (W) x 4" (D) •Mfr. #PDJ150U
Order #
555-9835
(1–3)
$139.00
(4–up)
$133.00
Dual Input iPod®
Docking Mixer
Docking stations provide seamless integration
of portable mp3 players into 19" rack audio systems. They
provide an easy way to connect iPod® units to distributed
audio system racks in homes, background music systems in
offices or public areas, and DJ and pro-sound systems that
use portable 19" cabinets. Simple “push/push” system
opens the docking platform for insertion of the iPod®.
After use, the easy release system allows removal of the
iPod® and closing of the platform for clean, sleek rack
appearance. Available as a single station (iRDS-1) or
dual station (iRDS-2) for simultaneous use of two iPods®,
both models occupy only one rack space. The docking
station provides Firewire, USB and audio outputs and
is compatible with all iPod®, iPod mini® and iPod
nano® products.
Order #
555-9010
555-9015
Model #
iRDS-1
iRDS-2
Description
Single station
Dual station
Ultra slim rack mount mixer is perfect for mixing two
stereo sources, or combining an auto-talkover microphone
with a single stereo source. Features: •CH1 and CH2
inputs have adjustable gain and two band EQ •CH1 and
CH2 each accept line level and RIAA equalized phono
input •Headphone output with independent level control
•Headphones will cue CH1 or CH2, with variable blend
level to the master mix •Front panel XLR mic input
(CH1) •Rear panel 1⁄4" mic input (CH2) •Input cross
fader •Balanced XLR main outputs •Unbalanced 1⁄4"
AUX outputs with independent level control •Fixed
unbalanced RCA record output •Compact 1RU
design •Model #MIX-R1U •See complete
details at MCMelectronics.com.
Order #
555-9330
ONLY
$199.99
ONLY
$115.00
229.00
NEW!
NEW!
iPod®
USB Plus
Docking Mixer
Compact tabletop mixer allows iPod players to be
easily used as a music source for any sound source,
including DJ applications. Dual docking station
provides independent controls for two separate
iPod players, with easy crossfading between
the two. Front panel 1⁄4" microphone input has
its own separate level adjustment, allowing
complete DJ functionality from any standard
microphone. This unit provides the following
controls, independently for each connected iPod:
•Rotary level control •Independent rotary bass, treble and midrange
•Pushbutton toggle play/pause •Pushbutton next track advance •Pushbutton previous track
Other features: •Master level control ▪Mic input with independent level and tone control
•1⁄4" headphone jack with level control •L/R RCA line level aux input •L/R RCA line level
output •Requires 9VDC, adapter is included •Dimensions: 2" (H) x 8.26" (W) x 8.26" (D)
•Mfr. #PMXI4U
Compact tabletop mixer allows iPod players
and conventional thumb drives to be easily
used as a music source for any sound source,
including DJ applications. Dual docking
station provides independent controls for one iPod and one
USB input, with easy crossfading between the two. Front panel 1⁄4"
microphone input has its own separate level adjustment, allowing complete DJ
functionality from any standard microphone. This unit provides the following controls,
independently for each connected media: •Rotary level control •Independent rotary
bass, treble and midrange •Pushbutton toggle play/pause •Pushbutton next track
advance •Pushbutton previous track Other features: •Master level control •Mic input
with independent level and tone control •1⁄4" Headphone jack with level control •L/R
RCA line level aux input •L/R RCA line level output •Requires 9VDC, adapter is
included ▪Dimensions: 2" (H) x 8.26" (W) x 8.26" (D) •Mfr. #PMXI3U
Order #
555-9860
Order $
555-9851
ONLY
$119.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$116.00
page
77
4
Incredible rack mount controller is ideal for fixed
installation in clubs, lounges, restaurants and gyms. It
allows complete digital music access, with a wide variety
of DJ control functions. It is the first in the industry to
allow DJs the ability to easily access digital audio files
directly from USB storage devices such as hard drives,
flash drives, CD/DVD ROMs and iPods™. The unique
cataloging system provides a number of browsing options
when searching a database, including search by artist,
song title, album and genre. String function even allows
searching by a certain word or phrase to find tracks. Front
and rear USB ports, plus connectivity option of up to four
USB storage devices (requires optional external USB
hub), means files have never been more accessible.
Features: •Full CBR and VBR mp3 and WAV
compatibility •Support for various hard drive and flash
based music players and external CD/DVD ROM drives
•Intelligent music database management •Multiple search
options •Seamless loop playback •iPod™ playlist
compatibility •Dual four line 80 character LCD displays
•USB keyboard for search and navigation •Shuffle mode
•Variable pitch slider •Model #HDC-1000 •See complete
details at MCMelectronics.com.
Section
4
Professional Audio
Rack Mount Stereo
Amplifier/Tuners
Rack Mount Stereo
Amplifier/Tuners
4
✔AM/FM tuner with 50 presets
✔Dual wireless microphones plus two wired mic inputs
✔USB input for direct MP3 reading
Unique combination of features and exceptionally high
power output allow these amplifiers to be used in a wide
variety of applications. Two included wireless mikes allow
easy paging and karaoke operation. Perfect for background
music and paging in public areas, offices, small clubs and
restaurants, these amplifiers will easily drive multiple
zones in a whole-house audio system. Features: •Two line
level inputs for CD/DVD/tape sources •I.R. remote control
•Front panel 3.5mm line input for portable players •Dual
front panel microphone inputs with level, echo, bass and
treble control for paging and karaoke use •A/B speaker
selection •Attractive blue fluorescent display •Electronic
control of input selection, master volume, bass and treble
levels •Three models to suit a variety of output power
requirements •Rating shown is max output, both channels
combined, see MCMelectronics.com for complete details
Order #
555-9380
555-9390
555-9400
Mfr. #
PWMA1001A
PWMA2001A
PWMA3001A
Output Power
1000W
2000W
3000W
4Dual microphone inputs
4Four line level inputs
Added features and exceptionally high power output allow
these amplifiers to be used for sound reinforcement
applications as well as multiple zone whole-house audio
systems. Features: •Four line level inputs for tuner/CD/
DVD/tape sources •I.R. remote control •Dual front panel
microphone inputs with level, echo, bass and treble
control for paging and karaoke use •A/B speaker selection
•Attractive blue fluorescent display •Front panel control
of input selection, master volume, bass and treble levels
•Two models to suit a variety of output power
requirements •Rating shown is max output, both channels
combined, see MCMelectronics.com for complete details
Mfr. #
PT1100
PT3300
Output Power
1000W
3000W
Unique combination of features and exceptionally high
power output allow these amplifiers to be used in a wide
variety of applications. Perfect for background music
and paging in public areas, offices, small clubs and
restaurants, these amplifiers will easily drive multiple
zones in a whole-house audio system. Features: •Built-in
AM/FM tuner with 50 station presets •Two line level
inputs for CD/DVD/tape sources •Front panel 3.5mm line
input for portable players •I.R. remote control •Dual front
panel microphone inputs with level, echo, bass and treble
control for paging and karaoke use •A/B speaker selection
•Attractive blue fluorescent display •Electronic control
of input selection, master volume, bass and treble
levels •Three models to suit a variety of output power
requirements •Rating shown is max output, both channels
combined, see MCMelectronics.com for complete details
Order #
555-9350
555-9360
555-9370
ONLY
$99.99
129.00
Mfr. #
P1001AT
P2001AT
P3001AT
Output Power
1000W
2000W
3000W
ONLY
$119.00
145.00
165.00
Rack Mount Stereo Amplifiers
ONLY
$159.00
179.00
199.00
Rack Mount Stereo Amplifiers
Order #
555-9410
555-9420
Rack Mount Stereo Amplifiers
✔AM/FM tuner with 50 presets
✔Dual microphone inputs
✔Ground-lift function
✔Balanced and unbalanced inputs
✔Stereo and bridged mono operation
Solid and
powerful
amplifiers
are perfect
for a variety of
sound reinforcement
and distributed audio
applications. The ground-lift feature eases installations in
situations where ground loops can be an issue, especially
if source component is not located near the amplifier.
Features: •Unbalanced line level RCA inputs •Balanced
combo inputs jacks accept TRS 1⁄4" or XLR plugs •Stereo
or bridged mono operation •LED bargraph display output
meters •Heavy-duty binding post outputs •110V/220V
selectable operation •Front panel signal and clip indicators
Specifications: •THD: <0.1% •Frequency response:
10Hz~50KHz •S/N ratio: 100dB •Three models to
suit a variety of output power requirements •Rating
shown is max output, both channels combined
•See MCMelectronics.com for complete details
Solid and powerful amplifiers
are perfect for a variety of sound
reinforcement and distributed audio applications.
Features: •Rugged 2RU rack mount chassis •Detented
gain controls for each amplifier channel •LED indicators
for output, clip protect and signal presence •Balanced
XLR and unbalanced 1⁄4" line level inputs •Ground lift
switch •Stereo and bridged mono operation •Heavy-duty
5-way binding posts and twist lock (Speakon compatible)
speaker outputs •110/220VAC selectable •#555-9600 also
includes a subwoofer crossover plus high pass output for
use as a discrete subwoofer amplifier
Solid and powerful amplifiers are suitable in equipment
racks or on a shelf, and are perfect for a variety of sound
reinforcement and distributed audio applications.
Features: •Unbalanced line level RCA inputs •Balanced
combo inputs jacks accept TRS 1⁄4" or XLR plugs •Stereo
or bridged mono operation •LED bargraph display output
meters •Heavy-duty binding post outputs •110V/220V
selectable operation •Attractive blue LED display
Specifications: •THD: <0.1% •Frequency response:
10Hz~50KHz •S/N ratio: 100dB •Dimensions: 31⁄2" (H) x
19" (W) x 103⁄4" (D) •Three models to suit a variety of
output power requirements •Rating shown is max output,
both channels combined. See MCMelectronics.com for
complete details
Order #
555-9580
555-9590
555-9600
Order #
555-9610
555-9620
555-9630
page
78
Power output (4ohm)
500W RMS x 2CH
700W RMS x 2CH
1500W RMS x 2CH
ONLY
$109.00
129.00
229.00
Order #
555-9910
555-9911
555-9912
Mfr. #
PT-1601X
PT-2001X
PT-4001X
Output Power
2,200W
3,300W
5,500W
ONLY
$189.00
209.00
369.00
Rack Mount
Balanced Mic Mixer
Features: •Connect up to six microphones •Channel
six is mic/line switchable •Feedback filter with rotary
control •Mix bus for connecting multiple units •Rotary
volume controls for each input, plus master level control
•XLR and 1⁄4" mic inputs •RCA line input • XLR and 1⁄4"
mic level outputs •1⁄4" and RCA line level outputs
•Frequency response 20Hz~20KHz •110V/220VAC
operation •Dimensions: 2.5" (H) x 19" (W) x 77⁄86" (D)
•Mfr. #PYM6
Order #
555-7780
(1-3)
$125.00
(4-up)
$114.00
200 Watt PA Mixer/Amplifier
✔Balanced and unbalanced inputs
✔Stereo and bridged mono operation
Model #
PTA1000
PTA1400
PTA3000
Massive amplifiers are suitable in equipment racks or on a
shelf, and are perfect for a variety of sound reinforcement
and distributed audio applications. They are perfect for
driving multiple sets of speakers in residential distributed
audio environments. Bridged mode is perfect for driving
stand alone subwoofers. Features: •Unbalanced line level
RCA inputs •Balanced combo inputs jacks accept TRS 1⁄4"
or XLR plugs •Stereo or bridged mono operation •LED
bargraph display output meters •Heavy-duty binding post
outputs •110V/220V selectable operation •Attractive LED
display (additional features on PT-4001X only) •Front
panel signal and clip indicators •Rear panel resettable
circuit breaker •1⁄4" and binding post outputs
Specifications: •THD: <0.1% •Frequency response:
10Hz~50KHz •S/N ratio: 100dB •3RU rack mount
•Three models to suit a variety of output power
requirements •Rating shown is max output, both channels
combined, see MCMelectronics.com for complete details
Order #
Mfr. # Rack Height Output Power ONLY
555-9550 PZR10XA
2RU
3,300W $189.00
555-9560 PZR30XA
3RU
4,400W
319.00
555-9570 PZR50XA
3RU
5,500W
369.00
Rack Mount Stereo Amplifiers
Rack Mount Stereo Amplifiers
4Balanced and unbalanced inputs
4Stereo and bridged mono operation
4Dual color bargraph output indicators
Mfr. #
PPA200
PPA300
PPA400
1-800-543-4330
Fax: 1-800-765-6960
Output Power
2,000W
3,000W
4,500W
This rack mount professional public
address amplifier provides 100W
RMS x 2 channel output, into an 8ohm load (1200W
bridged peak). Features: •Five channel mixer with mix
bus for connecting multiple amplifiers •Four mic inputs,
each accepts 1⁄4" and XLR •Stereo line input, accepts 1⁄4"
and RCA •Mono RCA line input •Stereo phono input
•Effects loop in/out •Feed back filter with rotary control
•8ohm and 70V output •110/220VAC selectable
•Dimensions: 53⁄5" (H) x 19” (W) x 147⁄16” (D)
Order #
555-7760
Mfr. #
PT910
ONLY
$159.00
179.00
229.00
NET 30
Terms
Customer Service: 1-877-626-3532
(1–3)
$303.00
(4–up)
$291.00
Professional Audio
Section
Two–Way PA/DJ Speaker Systems
4
These rugged carpeted speaker systems are ideal for DJ and stage situations where durability,
high power capacity and solid sound performance are essential. Features: •Heavy-duty
construction with reinforced corners •Black carpeted finish •Heavy-duty recessed carry
handles •Vented enclosure for improved low frequency response •4" x 10" horn loaded
mid/high frequency driver •Heavy-duty woofer with Kapton voice coil •Dual parallel 1⁄4"
phone jacks •13⁄8" pole mountable •8ohm •Sold individually
Order # Woofer Size
555-12910
8"
555-12911
10"
Power Capacity (peak)
300W
500W
Frequency Response
SPL
50Hz~20KHz
96dB W/M
40Hz~20KHz
98dB W/M
Dimensions
(H) x (W) x (D)
(ea.)
(2–3) (4–up)
19" x 13.5" x 12" $59.99 $54.54 $50.21
20" x 15.25" x 12.75" 84.99 77.95 71.95
These rugged carpeted speaker systems are ideal for larger scale DJ and stage situations where
durability, high power capacity and solid sound performance are essential. Features: •Heavy-duty
construction with reinforced corners •Black carpeted finish •Heavy-duty recessed carry handles
•Vented enclosure for improved low frequency response •4" x 12" horn loaded mid/high frequency
driver •Heavy-duty woofer with Kapton voice coil •Dual parallel 1⁄4" phone jacks •8ohm
•Sold individually
Frequency Response
SPL
40Hz~20KHz 97dB W/M
40Hz~20KHz 98dB W/M
Dimensions
(H) x (W) x (D)
(ea.)
26" x 17.75" x 16" $135.00
30" x 20" x 18"
177.00
(2–3)
(4–up)
$124.00 $115.00
161.00 150.00
Order #
555-6950
Model #
PASC12
(1-3)
$94.99
(4-up)
$88.95
Sound Reinforcement Subwoofer Systems
These rugged systems are ideal for larger scale venues where high power capacity and durability
are essential and additional low frequency response is required. Features: •Heavy-duty construction
with reinforced corners •Black carpeted finish •Heavy-duty woofer with treated cloth surround and
Kapton voice coil •1⁄4" input •8ohm •Sold individually
Power Order # Woofer Size Capacity (peak)
555-12920 15"
800W
555-12921 18"
1000W
Frequency Response
SPL
20Hz~500Hz 97dB W/M
20Hz~400Hz 100dB W/M
Dimensions
(H) x (W) x (D)
(ea.)
(2–3)
22.8" x 18.1" x 15.7" $131.00 $118.00
26.7" x 22.8" x "17.7 188.00 172.00
(4–up)
$114.00
162.00
15" Stage Floor Monitor
Multi angle cabinet makes this suitable for both near and
far field stage monitoring. Dual Speakon and 1⁄4" inputs
make it easy to daisy chain multiple units. 15" heavy-duty
woofer features a rigid, non-press paper cone, with cloth
accordion surround, 2.5" Kapton voice coil and 90 oz.
magnet, for high reliability in demanding applications.
Specifications: •Power capacity: 300W/800W RMS/peak
•Frequency response: 35Hz~20KHz •SPL: 102dB (W/M)
•Dimensions: 13.4" (H) x 27.5" (W) x 17.3" (D)
•Sold individually
Order #
555-6955
#555-9480
Model #
PASC15
(1-3)
$121.00
(4-up)
$109.00
#555-9490
Box Top Mixer Amplifiers
Compact amplifiers are perfect as self contained PA systems for a single presentation or a small
group. Simply add input sources and one or two speakers, and you are ready to perform. Models are available with six or
eight mic inputs, each accepting balanced or unbalanced microphones or guitar. Features: •Bass, treble and reverb
controls on each mic input •15V phantom power on all mic inputs •Master five band equalizer •L/R RCA style line level
inputs with separate level control •Fixed L/R line level record output •Built-in echo effects •Rear panel effects send and
returns Specifications: •Power output: 150W max •Mic inputs: 1⁄4" unbalanced, XLR balanced •Speaker outputs: Dual
(parallel) 1⁄4", minimum impedance 4ohm total •Effects send and return: 1⁄4" each •EQ controls: ±12dB at 60Hz, 250Hz,
800Hz, 2KHz and 8KHz
Order #
555-9480
555-9490
Model #
PMX601
PMX801
Inputs
Six
Eight
Dimensions
8" (H) x 17" (W) x 12" (D)
8" (H) x 20" (W) x 12" (D)
ONLY
$139.00
159.00
Two–Bus Mixing Console
Compact Box Top Mixer Amplifier
Compact amplifier is perfect as self contained PA
systems for presentations, sporting venues, or a small group. Simply
add input sources and one or two speakers, and you are ready to
perform. This unit features four mic inputs, each accepting balanced
our unbalanced microphones or guitar. Features: •Bass, treble and
reverb controls on each mic input •15V phantom power on all mic inputs •L/R RCA style line level inputs
with separate level control •Fixed L/R line level record output •Built-in echo effects •Rear panel effects send and
returns Specifications: •Power output: 150W max •Mic inputs: Four 1⁄4" unbalanced, XLR balanced •Speaker outputs:
Dual (parallel) 1⁄4", minimum impedance 4ohm total •Effects send and return: 1⁄4" each •Dimensions: 51⁄4" (H) x 20" (W) x
91⁄4" (D) •Model #PMX401
Order #
555-9470
ONLY
$119.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Table–top mixer provides the total control of multiple
mono mic and line input channels. Features: •Two stereo
line level input channels and four mono, mic level inputs
•Balanced XLR mic inputs •Pan control on mono channels
•Balance control on stereo inputs •1⁄4" TRS channel insert
•Five segment LED bargraph level indicator •Three band
equalizer on each input channel •Phantom power on all
mic inputs •Low cut filter on all mono inputs
•Dimensions: 1.6" (H) x 10.6" (W) x 8.9" (D)
Order #
Model #
555-6905 PYD1270
MCMelectronics.com
Email: quotes@MCMelectronics.com
Mono Input
Channels
Four
(1–3)
$105.00
(4–up)
$97.34
page
79
4
Multi angle cabinet makes this suitable for both near and
far field stage monitoring. Dual Speakon and 1⁄4" inputs
make it easy to daisy chain multiple units. 12" heavy-duty
woofer features a rigid, non-press paper cone, with cloth
accordion surround, 2" Kapton voice coil and 70 oz.
magnet, for high reliability in demanding applications.
Specifications: •Power capacity: 200W/600W RMS/peak
•Frequency response: 40Hz~20KHz •SPL: 101dB (W/M)
•Dimensions: 13" (H) x 25.6" (W) x 17.3" (D)
•Sold individually
Two–Way PA/DJ Speaker Systems
Power Order # Woofer Size Capacity (peak)
555-12912 12"
600W
555-12913 15"
800W
12" Stage Floor Monitor
Section
Compact PA System
#555-7800
4High efficiency
full range speaker
4300W peak
power output
4
4
Professional Audio
Eight Channel Powered Mixer
All in one unit provides eight mono mic/line input
channels, fed to a powerful stereo amplifier. It is ideal for
small to mid size venues, as a completely self contained
PA system. Simply add input sources and a pair of
speakers, and you are ready to perform. Mono inputs
(1~8): •Accepts XLR mic level or 1⁄4" line level signal
•Bass and treble controls •Trim and level control •L/R pan
•Effect send level Features: •48V phantom power on all
mic inputs •L/R RCA style line level inputs with separate
level control •Fixed L/R line level record output •Dual
seven band graphic equalizer •Built-in echo effects •Rear
panel effects send and returns •Headphone output with
adjustable level Specifications: •Power output: 100W x
2 channels max •EQ frequencies: 63Hz, 150Hz, 400Hz,
1KHz, 2.5KHz, 6.4KHz and 15KHz •Speaker outputs: 1⁄4"
•Effects send and return: 1⁄4" each •Dimensions: 11" (H) x
17" (W) x 12" (D) •Model #PMX804
Order #
555-9450
ONLY
$249.00
Wireless Battery Powered
Portable PA Systems
Perfect for presentations, schools,
churches, auctions and countless other applications. Four
different models are available, allowing selection of the
right unit for the needs. Features: •Powerful internal
amplifier •VHF wireless mic with 100' range •Internal
rechargeable battery pack with charger •110/220VAC
operation •Two microphone, one guitar and one line level
inputs •Echo, bass and treble controls •8" woofer and 3"
tweeter (8" full range on #555-7785) •Ported enclosure
for improved low frequency response •Mic operating
frequency 170~216MHz •Telescoping handle and caster
wheels #555-7785: •Standard unit with microphone
•100W/200W RMS/peak •Dimensions: 14.7" (H) x
11.2" (W) x 10.6" (D) •Weight: 26.5 lbs. #555-7790:
•High powered unit with microphone •150W/300W RMS/
peak •Dimensions: 14.7" (H) x 11.2" (W) x 10.6" (D)
•Weight: 34 lbs.
Order #
555-7785
555-7790
Model #
PWMA230
PWMA850
(1-3)
$156.00
189.00
Fully portable, self
contained unit combines
a powerful amplifier
with four input mixer,
an efficient full range
speaker system, and a
full function iPod®
dock, all in a rugged
transportable package.
Unit may be powered
via 120VAC, 12VDC
or internal rechargeable
battery. Top mounted
handle enables easy
carrying, retractable
handle allows easy
“luggage style”
transport via built
in casters. Features:
•Included VHF wireless
mic •Two wired mic inputs •Guitar/instrument input •Line
1
level audio inputs •Each input is ⁄4" jack and has its own
level control •Top mounted iPod® dock •Built-in adjustable
echo •Front panel bass and treble controls •8" full range
speaker in a ported enclosure •Pole mount for standard
13⁄8" speaker stands General: •Battery life: Five hours
approximate •Wireless mic range: 100' •Power output
(per manufacturers rating): 250W/500W RMS/peak
•Dimensions: 17" (H) x 101⁄2" (W) x 101⁄2" (D), including
casters and handles •Weight: 25 lbs. •Mfr. #PWMA-330
Order #
555-9915
(1–3)
$149.00
(4-up)
$143.00
179.00
Compact PA
System
4Built-in iPod® dock
4High fidelity ported
two-way speaker
4500W peak
power output
Compact PA System
12 Channel Powered Mixer
4High efficiency
full range speaker
4300W peak power output
4Top mounted iPod® dock
All in one unit provides eight mono mic/line input
channels and two sets of stereo line level inputs, fed to a
powerful stereo amplifier. It is ideal for small to mid size
venues, as a completely self contained PA system. Simply
add input sources and a pair of speakers, and you are
ready to perform. Mono inputs (1~8): •Accepts XLR mic
level or 1⁄4" line level signal •Bass, mid and treble controls
•Trim and level control •L/R pan •Effect send level Stereo
inputs (9/10, 11/12): •1⁄4" TRS balanced line level •Level
control only Features: •48V phantom power on all mic
inputs •L/R RCA style line level inputs with separate level
control •Fixed L/R line level record output •Dual seven
band graphic equalizer •Built-in echo effects •Rear panel
effects send and returns •Headphone output with
adjustable level Specifications: •Power output: 150W x
2 channels max •EQ frequencies: 63Hz, 150Hz, 400Hz,
1KHz, 2.5KHz, 6.4KHz and 15KHz •Speaker outputs: 1⁄4"
and Speakon •Effects send and return: 1⁄4" each
•Dimensions: 14" (H) x 20" (W) x 13" (D)
•Model #PMX1204
Fully portable, self
contained unit combines
a powerful amplifier
with four input mixer,
a two way speaker,
and a full function iPod®
dock, all in a rugged
transportable package.
Unit may be powered
via 120VAC, 12VDC or internal rechargeable battery. Top
mounted handle enables easy carrying, retractable handle
allows easy “luggage style” transport via built-in casters.
Features: •Rugged metal road case enclosure •Two wired
mic inputs (second doubles as a guitar/instrument input)
•Line level audio input •Each input is 1⁄4" jack and has its
own level control •Top mounted iPod® dock •8" woofer in
a ported enclosure •3" tweeter •Pole mount for standard
13⁄8" speaker stands General: •Battery life: 12 hours
approximate •Power output (per manufacturers rating):
30W RMS •Dimensions: 181⁄2" (H) x 151⁄2" (W) x 111⁄2"
(D), including casters and handles •Mfr. #PCMX240I
Order #
555-9460
Order #
555-9800
ONLY
$299.00
(1–3)
$219.00
(4–up)
$209.00
Fully portable,
self contained unit
combines a powerful
amplifier with four
input mixer, an
efficient full range
speaker system, and
a full function iPod®
dock, all in a rugged
transportable package.
Unit may be powered
via 120VAC, 12VDC
or internal rechargeable
battery. Top mounted
handle enables easy
carrying, retractable
handle allows easy
“luggage style”
transport via built-in casters. Features: •Included VHF
wireless mic •Two wired mic inputs •Guitar/instrument
input •Line level audio inputs •Each input is 1⁄4" jack and
has its own level control •Top mounted iPod® dock •Builtin adjustable echo •Front panel bass and treble controls
•Pole mount for standard 13⁄8" speaker stands iPod® dock:
•Compatible with Classic and Nano •Provides charge
function pushbutton control of play, pause, stop, next and
previous track Speaker: •8" woofer •1" soft dome tweeter
•Ported enclosure General: •Battery life: Five hours
approximate •Wireless mic range: 100' •Power output
(per manufacturers rating): 250W/500W RMS/peak
•Dimensions: 20" (H) x 101⁄2" (W) x 101⁄2" (D), including
casters and handles •Weight: 26 lbs. •Mfr. #PWMA-860I
Order #
555-9920
page
80
1-800-543-4330
Fax: 1-800-765-6960
(4–up)
$142.00
NET 30
Terms
Customer Service: 1-877-626-3532
(1–3)
$229.00
(4–up)
$219.00
Professional Audio
Compact PA System
4Built-in iPod® dock
4High efficiency
full range speaker
4600W peak power output
Order #
555-9925
(1–3)
$189.00
(4–up)
$179.00
Compact Practice
Guitar Amplifier
Ultra compact guitar
amplifier with speaker is
perfect for practice use with
virtually any electric guitar or
other musical instrument such as
keyboards, or miked musical instruments. Rugged
wooden enclosure houses a full range 61⁄2" speaker and
20W RMS amplifier. Features: •1⁄4" headphone jack
•Independent bass, treble and volume controls •1⁄4"
instrument input •Dimensions: 101⁄4" (H) x 93⁄4" (W) x
61⁄4" (D) •Mfr. #PPG260A
Order #
555-9885
(1–3)
$49.99
Wireless Battery
Powered Portable
PA System
✔100W maximum peak output
✔61⁄2" full range speaker
✔Includes UHF
wireless microphone
#555-9930
#555-9935
Portable PA System
4Available with or without iPod® dock
4High fidelity ported three-way speaker
4800W peak power output
Fully portable, self contained unit combines a powerful
amplifier with four input mixer, an efficient three-way
speaker system, and a full function iPod® dock, all in a
rugged transportable package. Unit may be powered via
120VAC, 12VDC or internal rechargeable battery. Top
mounted handle enables easy carrying, retractable handle
allows easy “luggage style” transport via built-in casters.
Features: •Included VHF wireless mic •Two wired mic
inputs •Guitar/instrument input •Two line level audio
inputs •Each input is 1⁄4" jack and has its own level control
•Top mounted iPod® dock •Built-in adjustable echo •Front
panel bass and treble controls Pole mount for standard 13⁄8"
speaker stands Speaker: •Ported enclosure •10" woofer
•4" midrange •1" soft dome tweeter iPod® dock:
•Compatible with Classic and Nano •Provides charge
function •Pushbutton control of play, pause, stop, next
and previous track General: •Battery life: Five hours
approximate •Wireless mic range: 100' •Power output
(per manufacturers rating): 400W/800W RMS/peak
•Dimensions: 25" (H) x 12" (W) x 111⁄2" (D),
including casters and handles •Weight: 38 lbs.
Order # Model #
Description
(1–3) (4–up)
555-9930 PWMA-1050 Without iPod dock$240.00$229.00
555-9935 PWMA-1080I With iPod dock
279.00 265.00
(4–up)
$47.50
Stage/Practice
Guitar Amplifier
Compact Practice
Guitar Amplifier
Compact guitar
amplifier with speaker
is perfect for practice
use whether alone or
with the band. It is fully
compatible with virtually
any electric guitar or other
musical instrument such as
keyboards, or miked musical instruments.
Rugged wooden enclosure houses a full range 8" speaker
and 30W RMS amplifier. Features: •1⁄4" headphone jack
•Independent bass, treble and volume controls •Switchable
bass expander effects switch •1⁄4" fixed line level output to
feed a second amplifier or mixer input •1⁄4" instrument
input •Dimensions: 13" (H) x 16" (W) x 93⁄4" (D)
•Mfr. #PPG460A
Versatile guitar
amplifier is perfect
for practice use
whether alone or
with the band, yet
has enough power
for small venues. It is
fully compatible with virtually any
electric guitar, this rugged amplifier houses a full range
12" speaker and 50W RMS amplifier. Features: •1⁄4" low
level input for microphone or guitar •1⁄4" high level input
for keyboard or other line level source •1⁄4" headphone jack
•Independent selectable reverb for low and high inputs
•Bass, treble and volume controls •Variable fuzz/distortion
control •Rear effect send and return jacks •Footswitch
input for reverb on/off control •Dimensions: 183⁄4" (H) x
161⁄4" (W) x 11" (D) •Mfr. #PPG860A
Order #
555-9890
Order #
555-9895
(1–3)
$72.99
(4–up)
$69.50
Follow us on:
Product Questions Email: tech@MCMelectronics.com
4
(1–3)
$119.00
(4–up)
$115.00
Compact, self contained unit
is ideal in lectures and other
speaking situations, as well
as for small scale karaoke
use. It includes both wired
and wireless microphones
NEW!
and will accept a line level signal from an
external source. Features: •Internal rechargeable battery
pack •Internal charger for the unit, as well as the wireless
mic •RCA style inputs for external source •Combo XLR/
1
⁄4" mic input •Separate gain control for each source
•Master volume, bass, treble controls •Battery life is
approximately four hours •Overall dimensions:
10.65" (H) x 7.85" (W) x 6.25" (D) •Mfr. #PWMA600
Order #
555-9430
ONLY
$179.00
Wireless Battery Powered
Portable PA System
✔200W maximum peak output
✔Internal two-way speaker
✔Includes UHF wireless microphone
Compact, self contained unit is ideal in lectures and
other speaking situations, as well as for small scale
karaoke use. It includes both wired and wireless
microphones and will accept a line level signal from an
external source. Features: •Internal rechargeable battery
pack •Internal charger for the unit, as well as the wireless
mic •RCA style inputs for external source •Two combo
XLR/ 1⁄4" mic inputs •Three channel input mixer •8"
woofer and 2.5" compression tweeter •13⁄8" speaker
stand mount •Master volume, bass, treble controls •Battery
life is approximately four hours •Overall dimensions:
10.24" (H) x 23.8" (W) x 13.39" (D) •Mfr. #PWMA3600
Order #
555-9440
ONLY
$219.00
Gooseneck
Lamps
Use with mixers
that utilize either
BNC or XLR connections on the top panel for
auxiliary lamp. Rack mount version requires one rack
space and features dual lamps with built-in dimmer.
All models require 12VDC.
Order #
555-115
555-116
MCMelectronics.com
Email: quotes@MCMelectronics.com
Description
XLR male base
BNC male base
(1-3)
$9.99
14.49
(4-up)
$9.69
13.99
page
81
4
Fully portable, self
contained unit combines
a powerful amplifier
with four input mixer,
an efficient full range
speaker system, and a full
function iPod® dock, all
in a rugged transportable
package. Unit may be
powered via 120VAC,
12VDC or internal
rechargeable battery. Top
mounted handle enables
easy carrying, retractable
handle allows easy
“luggage style” transport
via built-in casters.
Features: •Included VHF
wireless mic •Two wired
mic inputs •Guitar/instrument input •Line level audio
1
inputs •Each input is ⁄4" jack and has its own level control
•Top mounted iPod® dock •Built-in adjustable echo •Front
panel bass and treble controls •8" full range speaker in a
ported enclosure •Pole mount for standard 13⁄8" speaker
stands iPod® dock: •Compatible with Classic and Nano
•Provides charge function Pushbutton control of play,
pause, stop, next and previous track General: •Battery life:
Five hours approximate •Wireless mic range: 100' •Power
output (per manufacturers rating): 300W/600W RMS/peak
•Dimensions: 17" (H) x 101⁄2" (W) x 101⁄2" (D), including
casters and handles •Weight: 26 lbs. •Mfr. #PWMA-930I
Section
Section
4
Professional Audio
Professional Home/
Studio Stereo Crossover
4
50 Watt Portable
Guitar Amplifier
“Mini” guitar amplifier
is great for practice use.
20W/50W RMS/max
output amplifier and 51⁄4"
full range speaker are
mounted in a durable
open back cabinet.
Attached plastic feet
and metal corner guards provide
protection during transport. Input and headphone
connections are all front panel 1⁄4" jacks. Rotary controls
adjust volume, bass and treble. Switchable power allows
110V, 60Hz/220, 50Hz operation. Dimensions: 81⁄2" (W) x
10" (H) x 5" (D). Mfr. #GA-100.
Order #
555-3195
(ea.)
$42.99
(2-up)
$39.95
100 Watt Portable Guitar
Amplifier
Handy portable
guitar amplifier
is useable in
any musical
instrument
application.
40W/100W
RMS/max
output amplifier
and 8" full range
dual cone
speaker are
mounted in
a durable
sealed cabinet.
Attached plastic
feet and metal
corner guards
provide protection during transport. Input,
output and headphone connections are all front panel 1⁄4"
jacks. Rotary controls adjust gain, volume, bass, midrange
and treble. Switchable “bass expander” circuit provides
low frequency response. Switchable power allows 110V,
60Hz/220, 50Hz operation. Dimensions: 131⁄2" (W) x
163⁄4" (H) x 81⁄2" (D). Mfr. #GA-400.
Order #
555-3205
(ea.)
$69.99
(2-up)
$64.84
Professional three way, six channel crossover is suitable for club or high end home use. Ideal for any multi-amp
application. Provides the following adjustments: Low •Low pass cuttoff of 50Hz, 90Hz, 180Hz, 360Hz, 720Hz;
Mid •High pass cutoff of 50Hz, 90Hz, 180Hz, 360Hz, 720Hz •Low pass cutoff of 1KHz, 2KHz, 4KHz, 6KHz, 8KHz;
High •High pass cutoff of 1KHz, 2KHz, 4KHz, 6KHz, 8KHz. Features include: •Individual level control for low, mid
and high frequency channels •Rack mount chassis with handles •RCA input and output connections •Switchable 110/220V
operation Specifications: •Filter slope 12dB/octave
Order #
(ea.)
(2-up)
•Frequency response •20Hz~20KHz •S/N ratio 90dB
555-4050
$69.99
$64.84
•THD ±0.01% •Dimensions 19" (W) x 23⁄8" (H) x 81⁄2" (D)
•Mfr. #SEA-3000
Professional Home/Studio
Stereo Preamplifier
May be used on a tabletop or mounted in
a rack, making it suitable for professional or high end home use. Front panel includes an input for microphone, with level
control. Rotary controls adjust volume, loudness, bass, treble and midrange. Other features include hi/low filter, stereo/
mono mode selector. Push buttons select from up to five inputs labeled Tape, Tuner, CD, Aux and Phono. All inputs accept
standard line level, except phono input which accepts low level for magnetic cartridge. Specifications: •Input sensitivity:
•Mic: 0.5mV/600ohm •Phono: 3mV/47Kohm •Others 150mV/47Kohm •Output level: •Tape out: 150mV/100Kohm •Pre
out: 500mV/4Kohm •THD: <0.4% •Frequency response:
(ea.)
(2-up)
5Hz~30KHz •Connections: Mic input: 1⁄4", all others RCA type Order #
555-4051
$79.99
$73.95
female •Power requirement: 120/220VAC 50~60Hz
•Dimensions 19" (W) x 23⁄8" (H) x 81⁄2" (D) •Mfr. #PR-2500
Home/Studio Stereo Equalizer
Rack mount EQ provides individual left/
right control of 15 frequency bands from 25Hz to 16KHz. Three position selector allows slide controls to operate across
(6dB, 9dB or 12dB boost/cut range. Five segment (per channel) bargraph display shows relative input to output signal
level. Provides control of the following frequencies: 25Hz, 40Hz, 63Hz, 100Hz, 150Hz, 250Hz, 630Hz, 1KHz, 1.5KHz,
2.5KHz, 4KHz, 6.3KHz, 10KHz and 16KHz. Features include: •Individual left/right bypass switch •Rack mount chassis
with handles •RCA input and output connections •Switchable Order #
(ea.)
(2-up)
110/220V operation Specifications: •Frequency response
555-4045
$89.99
$83.95
•5Hz~20KHz •S/N ratio 90dB •THD <0.02% •Dimensions
19" (W) x 13⁄4" (H) x 95⁄8" (D) •Mfr. #PEQ-60
High
Frequency
Tweeter Array
Outstanding high
frequency response, wide
dispersion and very high immunity to burnout make this
an ideal addition to any existing PA speaker system. Sixsided enclosure places six piezoelectric tweeters, at five
different angles, for ultra wide dispersion. Because piezo
tweeters have very high impedance at low frequencies,
no crossover is required, and they may be connected
directly in parallel with the existing speaker system.
Specifications: •Power capacity: 100W RMS •Frequency
response: 4KHz~27KHz •SPL: 97dB (W/M) •Dimensions:
5.5" (H) x 19.5" (W) x 10" (D) •Mfr. #PAHT6
Order #
555-9155
High Frequency Tweeter Array
(1-3)
$22.99
(4-up)
$21.80
High Frequency
Tweeter Cabinet
Four tweeter cabinet provides outstanding high frequency
response and very high immunity to burnout, making this
an ideal addition to any existing PA speaker system.
Because piezo tweeters have very high impedance at low
frequencies, no crossover is required, and they may be
connected directly in parallel with the existing speaker
system. Specifications: •Power capacity: 150W RMS
•Frequency response: 4KHz~27KHz •SPL: 97dB (W/M)
•Dimensions: 6" (H) x 20.8" (W) x 9.8" (D) •Mfr. #PAHT4
Order #
555-9150
(1-3)
$18.99
High Frequency
Tweeter Cabinet
NEW!
(4-up)
$18.00
Mid/High
Frequency Cabinet
Outstanding high frequency response, wide dispersion and
very high immunity to burnout make this an ideal addition
to any existing PA speaker system. Six-sided enclosure
places six piezoelectric tweeters at five different angles
for ultra wide dispersion. Because piezo tweeters have
very high impedance at low frequencies, no crossover is
required, and they may be connected directly in parallel
with the existing speaker system. Specifications: •Power
capacity: 100W RMS •Frequency response: 1KHz~16KHz
•SPL: 89dB •Dimensions: 5.5" (H) x 19.5" (W) x 10" (D)
Inputs: ¼" input connection as well as binding posts
•Mfr. #PT04
Eight tweeter cabinet
provides outstanding
high frequency
response and very high
immunity to burnout, making this an ideal addition to any
existing PA speaker system. Because piezo tweeters have
very high impedance at low frequencies, no crossover is
required, and they may be connected directly in parallel
with the existing speaker system. Specifications: •Power
capacity: 150W RMS •Frequency response: 4KHz~27KHz
•SPL: 97dB (W/M) •Dimensions: 9.2" (H) x 16.8" (W) x
12" (D) •Mfr. #PAHT8
This ideal addition
to any existing PA
speaker system
delivers outstanding
midrange and high frequency
response. Compression horn midrange adds outstanding
clarity to instrument and vocals, and four piezo horn
tweeters provide very high immunity to burnout
Specifications: •Power capacity: 150W RMS •Frequency
response: 1KHz~27KHz •SPL: 97dB (W/M) •Nominal
impedance: 8ohm •Dimensions: 13" (H) x 23.2" (W) x
17.2" (D) •Mfr. #PAHT9
Order #
555-10345
Order #
555-9160
Order #
555-9165
page
82
MSRP
$55.00
ONLY
$14.99
(1-3)
$35.99
1-800-543-4330
Fax: 1-800-765-6960
(4-up)
$34.15
NET 30
Terms
Customer Service: 1-877-626-3532
(1-3)
$45.99
(4-up)
$43.65
Professional Audio
Compact Stereo Amplifier
Compact Stereo Amplifier
Order #
555-9975
(1–3)
$43.99
Order #
555-3192
(1-3)
$63.99
(4-up)
$60.75
(4–up)
$41.95
Compact
Stereo Amplifier
This small amplifier
is perfect when a line
level source, such as
a CD or DVD player, or portable MP3 player needs to be
connected directly to a pair of speakers. Attached input
cable is terminated with male L/R RCA connectors for
connection to most devices. Optional RCA to 3.5mm
adapter (#24-4590) allows easy connection to headphone
output of iPods and similar devices. Features: •Very
compact size •Push terminal speaker connections
•110/220VAC selectable Specifications: •Power
output: 3W RMS two channels, 15W two channels max
(4ohm) •THD: 1% •Frequency response: 40Hz~20KHz
•Dimensions: 2.2" (H) x 5.6" (W) x 4.2" (D) •Mfr. #PCA1
Order #
555-3194
(1-3)
$31.99
(4-up)
$30.35
Small amplifier is perfect when
multiple line level sources, such as a CD or DVD players,
or portable MP3 players need to be connected directly to
a pair of speakers. Features: •Very compact size •Front
panel selector for CD and AUX input •1⁄4" microphone
input with mic level control •Selectable mic “mix” or
mic “page” modes •Two sets of L/R RCA female input
connections •1⁄4" front panel headphone jack •Push
terminal speaker connections •110/220VAC selectable
Specifications: •Power output: 3W RMS x 2 channels,
15W x 2 channels max (4ohm) •THD: 1% •Frequency
response: 30Hz~20KHz •Dimensions: 2.5" (H) x
7.5" (W) x 5.25" (D) •Mfr. #PTA1
Order #
555-9990
(1–3)
$49.49
(4–up)
$46.75
Order #
555-9980
(1–3)
$61.99
(4–up)
$58.95
Follow us on:
Product Questions Email: tech@MCMelectronics.com
4USB input
4Dual CD player
Designed with the professional DJ in mind, this audio
player allows MP3 and WMA files to be directly played
from a USB device and features a dual CD player. With
features including a separate 3RU controller, 40 seconds of
anti shock memory, blue LED display, pitch controls, loop
controls, independent composite stereo outputs, and dual
USB inputs, this music controller can handle all of your
musical needs. Compact size and low cost also makes this
suitable for use as a music source in any background music
or whole-house audio system. Features: •Blue back lit
display •Jog wheel for searching •LCD display •Multiple
time and track tag display modes •45mm slide pitch
adjustment ±16% •Suitable for rack mount or tabletop
use •Controller dimensions: 5" (H) x 19" (W) x 31⁄4" (D)
•CD player dimensions: 31⁄2" (H) x 19" (W) x 10" (D)
•Mfr. #PDCD510MU
ONLY
$299.00
Digital Music
Controller and
Dual CD Player
4USB input
4SD card reader
4Dual CD player
NEW!
Designed with the professional DJ in mind, this audio
player allows MP3 and WMA files to be directly played
from USB or SD memory, and features a dual CD player.
With features including a separate 3RU controller, 40
seconds of anti shock memory, blue LED display, pitch
controls, loop controls, independent composite stereo
outputs, and dual USB and SD inputs, this music controller
can handle all of your musical needs. Compact size and
low cost also makes this suitable for use as a music source
in any background music or whole-house audio system.
Features: •Blue back lit display •Jog wheel for searching
•LCD display •Multiple time and track tag display modes
•45mm slide pitch adjustment ±16% •Suitable for rack
mount or tabletop use •Controller dimensions: 5" (H) x
19" (W) x 31⁄4" (D) •CD player dimensions: 31⁄2" (H) x
19" (W) x 10" (D) •Mfr. #PDCD610MU
Order #
555-9820
Compact Stereo Amplifier
Small amplifier is perfect when a
line level source, such as a CD or DVD player, or portable
MP3 player needs to be connected directly to a pair of
speakers. It also ideal when an extra set of in-wall,
in-ceiling or outdoor speakers, need to be connected to an
existing sound system. Features: •Very compact size with
relatively high output power •Five LED bargraph output
indicator for each channel •Independent bass and treble
controls •L/R RCA female input connections •Push
terminal speaker connections •110/220VAC selectable
Specifications: •Power output: 15W RMS x 2 channels,
75W x 2 channels max (4ohm) •THD: 1% •Frequency
response: 20Hz~40KHz •Dimensions: 2.5" (H) x
7.5" (W) x 5.5" (D) •Mfr. #PCA3
NEW!
Digital
USB Music
Controller and
Dual CD Player
Order #
555-9815
Compact Stereo
Amplifier With Mic Input
4
ONLY
$319.00
Compact Stereo
Amplifier With Mic Input
Small amplifier is perfect when
multiple line level sources, such as a CD or DVD players,
or portable MP3 players need to be connected directly to a
pair of speakers. It also ideal when an extra set of in-wall,
in-ceiling or outdoor speakers, need to be connected to an
existing sound system. Features: •Very compact size with
relatively high output power •Five LED bargraph output
indicator for each channel •Independent bass and treble
controls •1⁄4" microphone input with mic level control
•Selectable mic “mix” or mic “page” modes •Three sets of
L/R RCA female input connections •L/R RCA female line
level record output (fixed level) •1⁄4" front panel headphone
jack •Push terminal speaker connections •110/220VAC
selectable Specifications: •Power output: 15W RMS x 2
channels, 75W x 2 channels max (4ohm) •THD: 1%
•Frequency response: 20Hz~40KHz •Dimensions:
2.5" (H) x 7.5" (W) x 5.5" (D) •Mfr. #PCA3
Professional DJ style dual CD
player features separate controller
and transport housings for increased mounting flexibility.
Features: •Quick–start within 0.015 seconds •Pitch bend
up to ±16% •Single auto–cue/continuous play/relay •Jog
dial for frame–by–frame searching and speed control •Cue
function •BPM tap function •Elapsed/remaining time
display •110/220VAC operation •Dimensions controller:
3.5" (H) x 19" (W) x 1.8" (D) •Dimensions: main unit:
3.5" (H) x 19" (W) x 10.2" (D)
Order #
555-9995
Order #
555-7695
(1–3)
$79.49
(4–up)
$74.95
Professional Dual CD Player
MCMelectronics.com
Email: quotes@MCMelectronics.com
(1–3)
$215.00
(4–up)
$205.00
page
83
4
Small amplifier is perfect when a
line level source, such as a CD or
DVD player, or portable MP3 player needs to be connected
directly to a pair of speakers. It is perfect when an extra set
of remote speakers, such as in-wall, in ceiling or outdoor,
needs to be connected to an existing sound system.
Features: •Very compact size •Independent bass and
treble controls •L/R RCA female input connections •Push
terminal speaker connections •110/220VAC selectable
Specifications: •Power output: 8W RMS x 2 channels,
40W x 2 channels max (4ohm) •THD: 1% •Frequency
response: 20Hz~40KHz •Dimensions: 2.5" (H) x
6.25" (W) x 4.75" (D) ▪Mfr. #PCA2
This small amplifier is perfect when multiple line level
sources such as a CD, DVD or portable MP3 players need
to be connected directly to a pair of speakers. Features:
•Very compact size •Rotary input selector for CD, Aux1
and Aux2 inputs •L/R RCA line inputs •L/R RCA tape
output •1⁄4" mic input •Volume, balance, bass and treble
controls •Independent mic level control •Selectable
“pager” or “mixer” mode for mic input •Selectable
110/220VAC power Specifications: •Power output:
8W RMS x 2 channels, 40W x 2 channels max
(4ohm) •THD: 1% •Frequency response: 20Hz~20KHz
•Dimensions: 2.75" (H) x 7.5" (W) x 5.4" (D)
•Mfr. #PTA2
Section
Section
4
Professional Audio
NEW!
NEW!
4
Professional Four Input Stereo DJ Mixer
Intended primarily for DJ use, this full function mixer
provides four stereo inputs, plus a microphone input with
talk–over and dual seven band graphic equalizer. Unit sits
comfortably on the tabletop, or may be mounted in
standard 19" equipment racks, and occupies 6RU. Inputs:
•Channel #1 and #2: Each is switchable between stereo
line level or stereo magnetic phono inputs •Channel #3
and #4: Switchable between two separate stereo line level
sources •DJ Mic Channel: This channel actually accepts
two microphones. One combo jack accepts XLR or 1⁄4"
microphone input, the second accepts only 1⁄4" mic. This
channel provides independent level adjustment for each
mic, plus bass and treble controls, cue and talkover
function. Features: •Independent seven band EQ for each
right and left channel •Smooth 45mm slide level controls
on each input •45mm crossfader, assignable between any
of inputs #1~#4 •Stereo line level master output, with
unbalanced L/R RCA and balanced L/R 1⁄4" TRS
connections •Booth output with independent level control
•Fixed line level record output •1⁄4" stereo headphone jack
with cue function •BNC connection for 12V gooseneck
lamp •Switchable 120/240V operation •Dimensions:
91⁄2" (H) x 19" (W) x 31⁄2" (D) •Mfr. #PYD1808
Order #
555-9945
(1–3)
$125.00
#555-9880
Professional Four Input
Stereo DJ Mixer with Sampler
(4–up)
$119.00
Intended primarily for DJ use, this full function mixer
provides four stereo inputs, plus a microphone input
with talk–over and built–in digital sampling. Unit sits
comfortably on the tabletop, or may be mounted in
standard 19" equipment racks, and occupies 6RU. Inputs:
•Channel #1 and #2: Each is switchable between stereo
line level or stereo magnetic phono inputs •Channel #3
and #4: Switchable between two separate stereo line level
sources •DJ Mic Channel: This channel actually accepts
two microphones. One combo jack accepts XLR or 1⁄4"
microphone input, the second accepts only 1⁄4" mic. This
channel provides independent level adjustment for each
mic, plus bass and treble controls, cue and talkover
function. Features: •Independent seven band EQ for each
right and left channel •Smooth 45mm slide level controls
on each input •45mm crossfader, assignable between any
of inputs #1~#4 •Stereo line level master output, with
unbalanced L/R RCA and balanced L/R 1⁄4" TRS
connections •Booth output with independent level control
•Fixed line level record output •1⁄4" stereo headphone jack
with Cue function on each channel •BNC connection for
12V gooseneck lamp •Switchable 120/240V operation
•Dimensions: 91⁄2" (H) x 19" (W) x 31⁄2" (D)
•Mfr. #PYD3808
Order #
555-9955
(1–3)
$159.00
(4–up)
$154.00
Stereo Mixing Consoles
Professional consoles are suitable for small to medium
mixing applications including live performance, stage and
theater and home studio. In addition to multiple mic input
channels, each includes two stereo input channels, perfect
for recording and live performance. Features: •Separate
main and control room outputs •Included rack mount
hardware •Two Aux sends •L/R fixed record output •60mm
faders Mic inputs: •Each accepts balanced or unbalanced
XLR mic input, and balanced or unbalanced 1⁄4" line input
•1⁄4" TRS insert point •Rotary gain •Three band EQ with
swept mids •Aux1 send level •Aux2 send level •L/R pan
control •PFL selector (pre–fade/pre–mute listening)
Stereo inputs (2): •Separate left and right 1⁄4" balanced
line level inputs (TRS) •Rotary gain •Two band EQ •Aux1
send level •Aux2 send level •L/R pan control •PFL selector
(pre–fade/pre–mute listening) Outputs: •L/R 1⁄4" line level
monitor room outputs •L/R XLR line level main outputs
•1⁄4" Aux1 and Aux2 sends •L/R RCA line level output
•1⁄4" stereo headphone Main controls: •Headphone
level •Control room level •Switchable phantom power
•Power requirements: 90~240VAC, 50~60Hz
Order #
555-9870
555-9880
555-9875
NEW!
NEW!
4Available with 6, 8 or 12 mic inputs
4Two aux sends
4Sweepable mids on each channel
Mic Inputs 12
8
6
(1–3)
$369.00
289.00
269.00
(4–up)
$349.00
275.00
256.00
NEW!
NEW!
Professional Four Input Stereo
DJ Mixer with Sound Effects and Echo
Intended primarily for DJ use, this full function mixer
provides four stereo inputs, plus a microphone input with
talk–over, adjustable echo and six different internal sound
effects Unit sits comfortably on the tabletop, or may be
mounted in standard 19" equipment racks, and occupies
6RU. Inputs: •Channel #1 and #2: Each is switchable
between stereo line level or stereo magnetic phono inputs
•Channel #3 and #4: Switchable between two separate
stereo line level sources •DJ Mic Channel: This channel
actually accepts two microphones. One combo jack
accepts XLR or 1⁄4" microphone input, the second accepts
only 1⁄4" mic. This channel provides independent level
adjustment for each mic, plus bass and treble controls,
cue and talkover function. Features: •Six internal sound
effects: Laser, Machine Gun, Tron, Siren, Emergency and
UFO •Built-in echo with adjustable delay, repeat and level
•Independent seven band EQ for each right and left
channel •Smooth 45mm slide level controls on each input
•45mm crossfader, assignable between any of inputs
#1~#4 •Stereo line level master output, with unbalanced
L/R RCA and balanced L/R 1⁄4" TRS connections •Booth
output with independent level control •Fixed line level
record output •1⁄4" stereo headphone jack with Cue function
on each channel •BNC connection for 12V gooseneck
lamp •Switchable 120/240V operation •Dimensions:
91⁄2" (H) x 19" (W) x 31⁄2" (D) •Mfr. #PYD2808
Intended primarily for DJ use, this full function mixer
provides four stereo inputs, plus a microphone input with
talk-over. Unit sits comfortably on the tabletop, or may be
mounted in standard 19" equipment racks, and occupies
7RU. Inputs: •Channel #1 and #2: Each is switchable
between stereo line level or stereo magnetic phono inputs
•Channel #3 and #4: Switchable between two separate
stereo line level sources •AUX Channel: Switchable
between 1⁄4" microphone or mono RCA line level source,
this mono input provides a L/R pan adjustment •DJ Mic
Channel: Combo jack accepts XLR or 1⁄4" microphone
input, with L/R pan adjustment and switchable talkover
with variable mute level Features: •Smooth 45mm slide
level controls on each input •45mm crossfader, assignable
between any of inputs #1~#4 •Rotary controls for gain,
bass, midrange and treble on each input channel, including
the AUX and DJ Mic channels •Assignable effects send
and return with adjustable level •Stereo line level master
output •Fixed line level record output •1⁄4" stereo
headphone jack with Cue function on each channel •BNC
connection for 12V gooseneck lamp •Switchable 120/240V
operation •Dimensions: 11" (H) x 19" (W) x 31⁄2" (D)
•Mfr. #PYD4808
Intended primarily for DJ use, this basic function mixer
provides four stereo inputs, plus a microphone input with
talk-over. Unit sits comfortably on the tabletop, or may be
mounted in standard 19" equipment racks, and occupies
4RU. Inputs: •Input #1: Switchable between one stereo
line level source, or one 1⁄4" mic input •Input #2 and #3:
Each is switchable between stereo line level or stereo
magnetic phono input •Input #4: Switchable between two
separate stereo line level sources Mic Input: Combo jack
input accepts XLR or 1⁄4" microphone input, with its own
volume, bass and treble control Features: •Smooth 70mm
slide level controls on each input •70mm crossfader
between Input #2 and Input #3 •Stereo line level master
output, plus control room output with independent level
control •1⁄4" stereo headphone jack with cue function on
each channel •Detachable IEC power cord •Switchable
120/240V operation •Dimensions: 7" (H) x 19" (W) x
3" (D) •Mfr. #PYD1100
Order #
555-9950
Order #
555-9960
Order #
555-9940
page
84
(1–3)
$139.00
(4–up)
$135.00
Professional Five Input
Stereo DJ Mixer with Echo
(1–3)
$163.00
1-800-543-4330
Fax: 1-800-765-6960
(4–up)
$158.00
Professional Four
Channel DJ Mixer
NET 30
Terms
Customer Service: 1-877-626-3532
(1–3)
$99.49
(4–up)
$94.95
Professional Audio
NEW!
Professional
DJ Dual Rack
Mount CD
Player and Controller
Dual USB/SD Card Player
NEW!
4Dual CD player
Order #
555-9825
ONLY
$229.00
Order #
555-9840
(1–3)
$189.00
(4–up)
$180.00
Dual CD Player with Mixer
Order #
555-9830
(1–3)
$269.00
(4–up)
$256.00
NEW!
Heavy–Duty Tripod Speaker Stand
Perfect for use with most PA, DJ and other
professional sound applications. Heavy–duty
aluminum construction supports speaker
systems up to 88 lbs. Overall height is
adjustable from 43"~77". Top pole section is
13⁄8" diameter and is compatible with most
moderate to large size speaker systems that
utilize pole mounts. ABS speaker mount
adapter plate is supplied for use with
speakers that do not have a pole mount.
Black color, sold individually.
Order # (1–3) (4–9)
555-6256 $47.99 $45.50
(10–up)
$43.69
Tripod Speaker Stand
Perfect for use with most PA,
DJ and other professional
sound applications. Heavy–duty
aluminum construction supports
speaker systems up to 55 lbs. Overall
height is adjustable from 43"~73".
Top pole section is 1" diameter and
is compatible with most compact to
moderate speaker systems utilizing
pole mounts. ABS speaker mount
adapter plate is supplied for use with
speakers that do not have a pole
mount. Black color,
sold individually.
NEW!
Self contained unit is perfect for the
DJ on the go. Complete dual CD player included all of the
features you need for complete music entertaining. Built-in
mixer provides full blend and fade control between the two
CD players, as well as up to two external stereo sources
and one microphone. Features: CD player (both):
•Seamless loop sampling •±12% variable pitch bend
•31⁄2" (dia) rotary jog wheel •Soft touch pushbutton
controls for play/pause, CUE, disk tray open/close, direct
track selection, search, program, pitch bend, re-loop •Large
LCD display Mixer: •Two external inputs, both switchable
between line an magnetic phono level •1⁄4" unbalanced and
XLR balanced mic inputs •Bass, mid and treble control on
both input channels •DJ mic and cue level controls •45mm
crossfader •1⁄4" headphone output General: •Attractive
blue backlit controls •Motorized disk trays •Detachable
power cord •Switchable 120/240V operation •Dimensions:
41⁄2" (H) x 19" (W) x 101⁄2" (D) •Mfr. #PDCDL380
4
4
Perfect for a hobbyist or professional DJ, this 2RU dual
CD player features a separate 3RU controller, 40 seconds
of anti shock memory, blue LED display, pitch controls,
loop controls, and independent composite stereo outputs.
Features: •Blue back lit display •Jog wheel for searching
•LCD display •Multiple time and track tag display modes
•45mm slide pitch adjustment ±16% •Suitable for rack
mount or tabletop use •Controller dimensions: 5" (H) x
19" (W) x 31⁄4" (D) •CD player dimensions: 31⁄2" (H) x
19" (W) x 10" (D) •Mfr. #PDCD770
Extremely compact device will allow
MP3 and WMA files to be directly played from USB or
SD memory. Dual player provides identical features and
functions on both players, with independent RCA stereo
line level outputs for each. Features: •Attractive blue back
lit display •Jog wheel •Dot matrix LCD display of elapsed
track time, track number, track tag and pitch setting
•45mm slide pitch adjustment ±25% •Dual function jog
wheel for pitch and loop •Rotary control for track select
•Pushbutton SD/USB selector •Compact 2RU design is
suitable for rack mount or tabletop use •Switchable
80~260V, 50~60Hz operation •Dimensions: 31⁄2" (H) x
19" (W) x 4" (D) •Mfr. #PDJ250U
Section
Order # (1–3) (4–9) (10–up)
555-6251 $31.99 $28.59 $25.50
Speaker Stand Kit
Speaker stand kit is perfect for the
small venue band or, mobile DJ on
the move. Kit includes: •Two heavy–duty speaker stands
•Rugged gig bag, with two individual internal stand bags
•Two 21' highly flexible 12AWG speaker cables. Each
stand is constructed of rugged aluminum tubing and will
support 90 lbs. Height is adjustable from 43" ~ 75" tall.
Speaker cables are terminated with your choice of either
heavy–duty 1⁄4" plugs, or twist–lock connectors (compatible
with Speakon connectors).
Order # Speaker Cable (kit) (2–3 kits) (4 kits–up)
1
555-12900
⁄4"
$89.99 $84.95
$78.95
555-12905 Twist–lock
110.00 103.00
95.95
Speaker Stand Adapters
Designed for use with standard
commercial tripod stands including
models from MCM. Because they
install inside the speaker enclosure,
the speaker may then be used with or
without a stand. Constructed of 1⁄16"
matte black finished steel. Includes
mounting screws. Both sizes are
sold individually #50-1835: •Inside
diameter: 17⁄16", fits 13⁄8" diameter
pole •Required cutout diameter: 19⁄16"
#50-1910: •Inside diameter: 11⁄16", fits
1" diameter pole •Required cutout
diameter: 11⁄4"
Order #
50-1835
50-1910
Size
Large
Small
MSRP
$9.95
9.95
(ea.)
$5.89
5.89
(2-up)
$4.89
4.89
Piezo Dynamic
Hand Held
Megaphone
Dual USB/SD Card Player
Feature packed 4RU device will allow MP3 and WMA
files to be directly played from USB or SD memory. Dual
player provides identical features and functions on both
players, with independent RCA stereo line level outputs
for each. Features: •Attractive blue back lit display •Jog
wheel •Dot matrix LCD display of elapsed track time,
track number, track tag and pitch setting •Multiple time
and track tag display modes •45mm slide pitch adjustment
±24% •Dual function jog wheel for pitch and loop
•Pushbutton and rotary track selection •Pushbutton SD/
USB selector •Compact 2RU design is suitable for rack
mount or tabletop use •Switchable 80~260V, 50~60Hz
operation •Dimensions: 31⁄2" (H) x 19" (W) x 4" (D)
•Mfr. #PDJ350U
Order #
555-9845
(1–3)
$209.00
(4–up)
$199.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Patented Piezo
dynamic technology
provides much
greater efficiency
than conventional
voice coil drivers,
allowing this
megaphone to
provide higher
output power with lower power consumption. This
means longer battery life and up to 50% less weight than
conventional megaphones. Features: •Weather resistant
construction •Push-to-talk trigger handle •Attached carry
strap •Rotary volume control •Built-in siren and whistle
•25W output •24 hour battery life •Requires eight “C”
batteries, not included (#292-010) •#555-973 includes
push-to-talk microphone
Durable switch is ideal for any application requiring
foot operated control. Heavy steel housing stands up
to the abuses of stage use. Non-skid rubber base and foot
pad keep pedal in place. Attached shielded 10' cable is
terminated with a hand soldered, metal 1⁄4' phone plug, with
spring strain relief. Momentary version is normally open,
internal switch may be rewired for normally closed use.
Dimensions (depressed), 11⁄8" (H) x 31⁄2" (W) x 31⁄8" (D).
Color: •Housing: Black •Foot pad (momentary): Red
•Foot pad (push-on-push-off): Black
Order #
555-971
555-973
Order # Switch Type
Current
(1-5) (6-9)(10-up)
555-3100Momentary
5A @ 125V $6.69 $6.29 $5.69
555-3105Push-on/Push-off 2A @ 125V 6.69 6.29 5.69
Mfr. #
PGM-25PD
PGM-25MIC
ONLY
$74.99
84.99
#555-3100
#555-3105
Foot Pedal Switches
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
85
Section
4
Professional Audio
#555-0411
#555-0416
#555-0421
NEW!
Two-Way PA/DJ Speaker Systems
These rugged carpeted speaker systems are ideal for DJ and stage situations where
durability, high power capacity and solid sound performance are required on a tight budget.
Features: •Piezo horn tweeters •Metal corner protectors •Recessed handles •13⁄8" diameter
pole mount •Metal grills •Heavy-duty MDF cabinets Inputs: ¼" input connections as well
as binding posts
4
Order #
555-10300
555-10305
555-10310
555-10315
Woofer
Size
8"
10"
12"
15"
Power
capacity (peak)
300W
400W
500W
600W
Frequency
Response
SPL
35Hz~20KHz 89dB
30Hz~20KHz 90dB
25Hz~20KHz 91dB
20Hz~20KHz 92dB
Dimensions
(H) x (W) x (D)
17.5" x 11.5" x 10"
20" x 15" x 12"
23" x 15.5" x 14"
25" x 18" x 16"
MSRP ONLY
$69.00 $29.99
89.00 39.99
119.00 54.99
139.00 69.99
NEW!
Sound Reinforcement 15" Subwoofer System
Ideal for use in a larger scale venue, this 15" subwoofer system provides high SPL level
and low frequency levels. Features: •Recessed handles •13⁄8" diameter pole mount on top
of cabinet •Metal grills •Heavy-duty MDF cabinet Specifications: •Power capacity: 700W
RMS •Frequency response: 1KHz~16KHz •SPL: 89dB •Dimensions: 20" (H) x 18" (W) x
17" (D) Inputs: ¼" input connection as well as binding posts •Mfr. #PB1507
Woofer
Power
Frequency
Order #
Size capacity (peak) Response
SPL
555-10320 15"
700W
20Hz~500Hz 91dB
Dimensions
(H) x (W) x (D) MSRP ONLY
20" x 18" x 17" $129.00 $59.99
NEW!
Two Way PA/DJ Floor Monitor Speakers
Floor monitor DJ and stage speakers provide versatility and solid sound
performance on a tight budget. Angled cabinet places speaker at optimum
position for near field monitoring, or stand on end for standard use. Features:
•Piezo horn tweeters •ABS corner protectors •Recessed handles •Metal grills
•Heavy-duty MDF cabinets Inputs: ¼" input connections as well as binding posts
Power
Order #
Woofer Size capacity (peak)
555-10330
10"
400W
555-10335
12"
500W
555-10340
15"
600W
Frequency
Response
SPL
30Hz~20KHz
90dB
25Hz~20KHz
91dB
20Hz~20KHz
92dB
Dimensions
(H) x (W) x (D)
13" x 23" x 14"
15" x 25" x 15.75"
18.5" x 29.5" x 17"
MSRP
$99.00
119.00
138.00
ONLY
$44.99
54.99
69.99
#555-9710
Box Top Mixer Amplifiers
✔USB/MP3 reader
✔100W RMS output
✔Five-band equalizer plus effects
Compact amplifiers are perfects as self contained PA systems for a
single presentation or a small to medium size venues. What sets these
apart is the built-in USB port which accepts standard thumb drives, and
directly reads MP3 and WMA audio files. Combined with commonly
available thumb drives which hold hours of music, these mixeramplifiers become a self contained music system. MP3 features:
•Backlit LCD display of file being played •Pushbutton control for play/
pause, stop, repeat, track forward and reverse Features: •Bass, treble
and reverb controls on each mic input •15V phantom power on all mic
inputs •Master five band equalizer •L/R RCA style tape inputs with
separate level control •Fixed L/R line level record output •Built-in echo
effects •Rear panel effects send and returns Specifications: •Power
output: 100W RMS •Mic inputs: 1⁄4" unbalanced, XLR balanced
•Speaker outputs: Dual (parallel) 1⁄4", minimum impedance 4ohm total
•Effects send and return: 1⁄4" each •EQ controls: ±12dB at 60Hz, 250Hz,
800Hz, 2KHz and 8KHz
Order #
555-9700
555-9710
555-9720
page
86
Mic Inputs
Four
Six
Eight
Dimensions
(H) x (W) x (D)
8" x 15.5" x 12"
8" x 17.5"x 12"
8" x 20.25" x 12"
MSRP
$199.00
219.00
249.00
Compact Microphone Mixer
Tabletop mixer is perfect for small
applications where up to four microphones
need to be fed to a single input. It can also be
useful in situations where an existing mixer
does not have enough inputs. It will last up to
ten hours on a standard 9V alkaline battery,
or may be powered from an optional AC
adapter. Features: •1⁄4" inputs and output
•Rotary level control for each input
•Built-in echo effects with adjustable delay
and depth •Rugged sloped metal enclosure
•Dimensions: 21⁄4"(H) x 6" (H) x 33⁄8" (D)
Order #
555-9730
MSRP
$29.95
#555-0410
#555-0415
Audio Over
Twisted Pair
Transceivers
Active transmitter/receiver
sets provide means of sending
unbalanced and balanced
audio, at great distances over conventional
Cat 5 cable. Unlike conventional passive
NEW!
baluns, these powered transceivers are
able to send the signal literally thousands of feet. Because
each signal path is actively converted to a balanced signal,
total noise isolation is achieved and ground loop issues are
eliminated. Using conventional Cat 5 cable, these units use
one pair for power and the others for up to three audio
channels, designated as pair-A, pair-B and pair-C.
Depending upon the model, transmitters and receivers
operate on one or more pairs. Single pair models are
selectable. All units must be used as a set, which includes
a sender, receiver and a power supply. The listed power
supply may be connected to either sender or receiver at
distances of up to 400'. For greater distances, a power
source must be connected at both ends. Optional power
inserter enables power to be applied anywhere along the
Cat 5 line. System requires 24VDC, AC adapter sold
separately. Features: •Audio frequency response:
20Hz~50KHz (line level), 100Hz~30KHz (mic level)
•Compatible with all RDL format-A products •Thorough
details available at MCMelectronics.com
Order #
Mfr. #
Description
ONLY
Free standing stick-on senders and receivers
555-0400 TX-TPS1A Active single pair sender $109.00
555-0405 TX-TPS3A Active three pair sender 125.00
555-0435 TX-TPR1A Active single pair receiver 110.00
555-0440 TX-TPR3A Active three pair receiver 125.00
555-0350 TX-TP1PW Power inserter
67.49
Single gang decora senders
555-0410 DS-TPS1A Balanced XLR
138.00
microphone single pair, stainless
555-0411 D-TPS1A
Balanced XLR
138.00
microphone single pair, white
555-0415 DS-TPS2A L/R RCA line input,
132.00
two pair, stainless
555-0416 D-TPS2A
L/R RCA line input,
132.00
two pair, white
555-0420 DS-TPS3A XLR plus L/R RCA input, 140.00
three pair, stainless
555-0421 D-TPS3A
XLR plus L/R RCA input, 140.00
three pair, white
Single gang decora receivers
555-0450 DS-TPR1A Balanced XLR
139.00
microphone single pair, stainless
555-0451 D-TPR1A
Balanced XLR
139.00
microphone single pair, white
555-0455 DS-TPR2A L/R RCA line input,
145.00
two pair, stainless
555-0456 D-TPR2A
L/R RCA line input,
145.00
two pair, white
555-0460 DS-TPR3A XLR plus L/R RCA input, 154.00
three pair, stainless
555-0461 D-TPR3A
XLR plus L/R RCA input, 154.00
three pair, white
AC adapters
555-PS-24APS-24A
24VDC, 400mA
19.99
555-PS-24KPS-24K
24VDC, 1A
26.49
ONLY
$19.99
ONLY
$149.95
169.95
189.95
1-800-543-4330
Fax: 1-800-765-6960
#555-0420
#555-0405
NET 30
Terms
Customer Service: 1-877-626-3532
#555-0311
Professional Audio
NEW!
#555-0300
NEW!
#555-0310
A/V Over Twisted Pair Transceivers
Order #
Mfr. #
Free standing stick-on type
555-0300
TX-TPR3C
555-0305
TX-TPS3C
555-0350
TX-TP1PW
Single gang decora
555-0310
DS-TPS3C
555-0311
D-TPS3C
555-0315
DS-TPR3C
555-0316
D-TPR3C
AC adapters
555-PS-24A PS-24A
555-PS-24K PS-24K
#555-0526
Description
ONLY
$177.00
164.00
67.49
A/V sender
A/V receiver
Power inserter
180.00
180.00
204.00
204.00
A/V sender, stainless
A/V sender, white
A/V receiver, stainless
A/V receiver, white
24VDC, 400mA
19.99
24VDC, 1A
26.49
#555-0531
The EZ series stereo audio distribution amplifier
allows distribution of one audio source to four different
amplifiers. Inputs include both unbalanced RCA and
unbalanced 3.5mm, and outputs are unbalanced RCA.
Features: •Gold-plated RCA jacks •Front-panel level
control •Dual-led VU meter for each channel
Specifications: •Frequency response: 10Hz~20KHz
•Noise:< -85dB •Requires 24VDC, 60mA (AC
adapter included) •Dimensions: 5.75" (W) x
3" (D) •1⁄3 rack width
Order #
555-0650
ONLY
$120.00
NEW!
EZ Audio
Format
Converter
The EZ-AFC2 is a stereo bi-directional audio format
converter with level controls. Conversion is provided
between balanced rear-panel XLR jacks and unbalanced
front-panel RCA jacks. LED VU metering is provided for
all audio channels facilitating adjustment for high or low
input levels. The bi-directional format allows the
EZ-AFC2 to fully convert the stereo input and stereo
output of a consumer audio product to professional
balanced standards. Features: •Unbalanced to balanced
audio conversion •Balanced to unbalanced audio
conversion •Unbalanced RCA connections on front panel
•Balanced XLR connections on rear panel •Front-panel
level controls •Dual-LED VU meter for each channel
Specifications: •Requires 24VDC, 90mA (AC adapter
included) •Dimensions: 5.75" (W) x 3" (D) •1⁄3 rack width
•Mfr. #EZ-AFC2
Order #
555-0652
ONLY
$172.00
NEW!
EZ Series
Audio/Video
Switcher
#555-0525
#555-0530
NEW!
Single Gang Decora
Headphone Amplifiers
Versatile single gang decora inserts accept a wide range of
line level inputs, and provide headphone level output. They
are perfect in commercial applications including museums,
music stores, language translation and interview studios
and even residential applications. Very high input
impedance means that several headphone jacks may be
connected to a single source. Features: •Accepts balanced
or unbalanced line level signals •Selectable 20dBV and
+20dBu sensitivity •Stereo/mono operation •Rotary
volume control •Screw terminal input connections
•Requires 24VDC, AC adapter not included •Thorough
details available at MCMelectronics.com
Order #
555-0525
555-0526
555-0530
555-0531
AC adapters
555-PS-24A
555-PS-24K
Mfr. #
Description
1
DS-SH1
⁄4" output, stainless
1
D-SH1
⁄4" output, white
DS-SH1M 3.5mm output, stainless
D-SH1M
3.5mm output, white
PS-24A
PS-24K
ONLY
$123.00
123.00
120.00
120.00
24VDC, 400mA
24VDC, 1A
19.99
26.49
Follow us on:
Product Questions Email: tech@MCMelectronics.com
EZ series
audio/video switcher allows connection of multiple
components to a single display. Features: •Video inputs
accept NTSC or PAL signals •Unbalanced stereo audio
inputs and output •Simultaneous audio and video switching
•Audio and video on color-coded gold plated RCA jacks
•Inputs and outputs on rear panel •Full-size interlocking
push buttons on front panel Specifications: •Frequency
response: 10Hz~20KHz (±0.01dB) •Requires 24VDC,
100mA (AC adapter included) •Dimensions: 5.75" (W)
x 5" (D) •1⁄3 rack width •Mfr. #EZ-AVX4
Order #
555-0654
ONLY
$169.00
EZ Series
Headphone
Distribution
Amplifiers
Order #
Mfr. #
555-0664 EZ-HDA4A
555-0666 EZ-HDA4B
555-0668 EZ-HDA6
Description
ONLY
Four 3.5mm outputs
$135.00
on front panel
Four 3.5mm outputs
135.00
on rear panel
Six 1⁄4" outputs on rear 157.00
panel and loop out
NEW!
EZ Series
Stereo
Audio Input
Switcher
#555-0670
The EZ series
stereo audio
input switcher
features four
unbalanced
RCA inputs and
one unbalanced
RCA output.
Features:
#555-0696
•Gold plated
connections •Volume control on front panel
Specifications: •Frequency response: 10Hz~20KHz
•Noise:< -70dB •Requires 24VDC, 50mA (AC adapter
included) •Dimensions: 5.75" (W) x 3" (D) •1⁄3 rack width
Order #
Mfr. #
With 3.5mm or ¼" headphone output
555-0670
EZ-HSX4
Without headphone output
555-0696
EZ-SX4
EZ Stereo Line-Level Audio Mixer
The EZ series line level audio mixer provides four stereo inputs, and one
stereo output. Features: •Three unbalanced line inputs on RCA jacks •One
line input on 3.5mm or RCA jacks •Unbalanced output on 3.5mm or RCA
jacks •Dual-LED VU meter for each channel Specifications: •Frequency
response: 10Hz~20KHz (±0.01dB, line) •Noise: < -85dB (below -10dBV
output) •Requires 24VDC, 60mA (AC adapter included) •Dimensions:
5.75" (W) x 3" (D) •1⁄3 rack width •Mfr. #EZ-MX4L
Order #
555-0676
#555-0664
EZ series
headphone
distribution
amplifiers
provide the
highest level
of value to
A/V professionals
#555-0666
and A/V users
who demand
professional
quality. Features:
•Unbalanced inputs
on rear panel •Input
on 3.5mm stereo
mini, 1⁄4" (6.3 mm)
or RCA jacks
#555-0668
•Front-panel level
control for each output Specifications: Frequency
response: 20Hz~50KHz (±1.5dB, 100Ω load) •Crosstalk:
<-75dB (1KHz) •Requires 24VDC, 65mA (AC adapter
included) •Dimensions: 5.75" (W) x 3" (D) •1⁄3 rack width
ONLY
$147.00
135.00
NEW!
ONLY
$139.00
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
87
4
Active transmitter/receiver sets provide means
of sending L/R audio and composite video signals
great distances over conventional Cat 5 cable. Unlike
conventional passive baluns, these powered transceivers
are able to send the signal literally thousands of feet.
Because each signal path is actively converted to a
balanced signal, total noise isolation is achieved and
ground loop issues are eliminated. All units must be used
as a set, which includes a sender, receiver and a power
supply. The listed power supply may be connected to either
sender or receiver at distances of up to 400'. For greater
distances, a power source must be connected at both ends.
Optional power inserter enables power to be applied
anywhere along the Cat 5 line. System requires 24VDC,
AC adapter sold separately. Features: •Single gang
devices are compatible with decora inserts •Compatible
with NTSC and PAL •Video bandwidth: 10MHz •Audio
frequency response: 20Hz~50KHz •Compatible with all
RDL Format-C products •Thorough details available at
MCMelectronics.com
4
NEW!
EZ Series
Stereo Audio
Distribution
Amplifier
#555-0305
Section
Section
4
Professional Audio
#555-0700
NEW!
NEW!
4
#555-0672
EZ Series
Microphone
Preamplifiers
with Compressors
EZ series microphone
preamplifiers feature
front-panel volume
controls and audio
level metering. A
front-panel switch
engages an audio
compressor to control
#555-0674
overloads and
clipping during high level audio bursts or peaks from the
microphone. Dynamic or condenser microphones are both
supported with rear-panel switchable phantom voltage.
They are ideal to add microphone inputs to mixers and
amplifiers with line inputs. Features: •RCA or 3.5mm
output •LED VU metering facilitates easy level adjustment
Specifications: Frequency response: 80Hz~40KHz (±1dB,
mic input, -6dB at 20Hz with integral high-pass filter)
•Compression: 20dB range, switch-selectable •Requires
24VDC, 100mA (AC adapter included) •Dimensions:
5.75" (W) x 3" (D) •1⁄3 rack width
Order #
555-0672
555-0674
Mfr. #
EZ-MPA1
EZ-MPA2
Inputs
Single
Dual
ONLY
$132.00
162.00
NEW!
EZ Series
Microphone
and Stereo
Audio Mixer
The EZ series microphone and stereo audio mixer
allows you to combine four audio signals into one output.
Features: •Two microphone XLR inputs with phantom
voltage •Two unbalanced stereo RCA inputs •Unbalanced
stereo RCA output •Gold-plated RCA jacks •Front-panel
level control •Dual-led VU meter for each channel
Specifications: •Frequency response: 80Hz~40KHz (mic
input) 10Hz~20KHz (line input) •Noise:< -65dB •Requires
24VDC, 100mA (AC adapter included) •Dimensions:
5.75" (W) x 3" (D) •1⁄3 rack width
Order #
555-0678
EZ Series
20 Watt
Stereo Audio
Amplifier
The EZ series stereo
audio amplifier has
one line input and a front-panel volume control. Features:
•10W RMS per channel into 8ohm •8W RMS per channel
into 4ohm •Switch-selectable load impedance on rear
panel •Unbalanced line input on RCA jacks •Integral
overload limiter with led indicator •Limiter controls
overloads from clipping Specifications: •Frequency
response: 35Hz~20KHz •Noise: < -70dB •Requires
24VDC, 1000mA (AC adapter included) •Dimensions:
5.75" (W) x 3" (D) •1⁄3 rack width •Mfr. #EZ-PA20
Order #
555-0682
ONLY
$117.00
NEW!
EZ Series Stereo
Phono Preamp
The EZ series stereo
phono preamplifier
allows for a turntable
with magnetic cartridge
to be played through a
conventional line level
amplifier. Features: •Gold-plated RCA jacks •Front-panel
gain trimmer for each channel •Dual LED VU meter for
each channel •RIAA equalization •Turntable grounding
screw Specifications: •Frequency response: 20~20KHz
•Noise:< -74dB (36dB gain, 1KHz) •Requires 24VDC,
45mA (AC adapter included) •Dimensions:
2.9" (W) x 3" (D) •1⁄6 rack width
Order #
555-0684
ONLY
$89.99
NEW!
ONLY
$147.00
NEW!
EZ Series
20 Watt Stereo
Audio Mixer
Amplifier
The EZ series
stereo audio mixer amplifier combines two unbalanced
stereo audio inputs and one microphone input into one
signal, and has a built-in two channel amplifier. Features:
•Ten watts rms per channel into 8ohm •8W RMS per
channel into 4ohm •Switch-selectable load impedance
on rear panel •Balanced microphone input on XLR
•Unbalanced line inputs on RCA jacks •Switch-selectable
phantom on mic input •Bass and treble tone control
equalization •Integral overload limiter with led indicator
•limiter controls overloads from clipping Specifications:
•Frequency response: 50Hz~20KHz (mic input)
35Hz~20KHz (line input) •Noise:< -70dB •Requires
24VDC, 1000mA (AC adapter included) •Dimensions:
5.75" (W) x 3" (D) •1⁄3 rack width •Mfr. #EZ-MXA20
Order #
555-0680
page
88
ONLY
$185.00
EZ Series Mounting Accessories
Accessories used to mount your Radio Design
Labs EZ series products in either a rack or on a desk.
Provides for a clean, organized, professional installation.
Order # Mfr.#
Description
555-0656 EZ-CC6 Component chassis 555-0658 EZ-DC1 Desktop chassis for
1
⁄6 rack components
555-0660 EZ-DC2 Desktop chassis for
1
⁄3 rack width components
555-0662 EZ-FP1 1⁄6 width filler panel mounts in
mounts in EZ-RA6 and EZ-CC6
555-0686 EZ-RA6 Rack adapter for 1⁄6 mount
555-0688 EZ-SD1 Storage drawer 1⁄6 rack
width mounts in CC6 or RA6
555-0690 EZ-SD2 Storage drawer 1⁄3 rack width
mounts in EZ-CC6 or EZ-RA6
555-0692 EZ-SMB1 Surface mount bezel for 1⁄6
rack width components
555-0694 EZ-SMB2 Surface mount bezel for
1
⁄3 rack width components
555-0698 EZ-UCB2 Under counter brackets
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$72.49
36.99
39.99
7.99
#555-0702
#555-0704
NEW!
EZ Series Two and Three-Way
Composite Video Distribution Amplifiers
The EZ series composite video distribution amplifiers
feature a wide bandwidth supporting high-quality video
distribution. Front panel gain and EQ trimmers allow you
to fine tune your video signal. Features: •75ohm input
•Gold plated jacks •Supports NTSC or PAL signals
•Compact size 2.9" (7.4 cm)W x 3" (7.6 cm)D
Specifications: •Input level: 1V p-p nominal •Gain: Unity
to +6dB (adjustable) •Equalization: Flat to +7dB at 50MHz
(adjustable) •Bandwidth: > 400MHz •Requires 24VDC,
35mA (AC adapter included) •Dimensions: 2.9" (W)
x 3" (D) •1⁄6 rack width
Order #
555-0700
555-0702
555-0704
Mfr. #
EZ-VDA2B
EZ-VDA2R
EZ-VDA3B
Description
BNC 1 x 2 RCA 1 x 2
BNC 1 x 3
#555-0706
#555-0708
#555-0714
#555-0710
NEW!
ONLY
$85.49
98.49
119.00
#555-0712
EZ Series VGA/XGA
Distribution Amplifiers
Select and distribute VGA/
XGA video with these high-quality amplified and
buffered distribution amplifiers. Capable of resolutions up
to 2048 x 1536, these selectors are perfect in board rooms,
classrooms and lecture halls. Features: •Front-panel
switch selects between the inputs •Associated BIT ID
switch to assure compatibility with various computers
•The sync for input one is front-panel switch-selectable
between standard TTL or video •One of the outputs is
individually buffered for driving the computer monitor
•The other outputs are driven by separate output amplifiers
•Front panel function switches •Input switching is fully
solid state for long-term reliable immunity from switch
noise and the bandwidth limitations of mechanical
switches •Equalized models feature EQ and gain
adjustment for fine tuning •3' VGA cable included
Specifications: •Video bandwidth: > 470MHz
•Requires 24VDC, 90mA (AC adapter included)
•Dimensions: 5.75" (W) x 5" (D) •1⁄3 rack width
Order #
555-0706
555-0708
555-0714
555-0710
555-0712
Mfr. #
EZ-VM22E
EZ-VM24E
EZ-VMD4E
EZ-VMD2
EZ-VMD4
42.49
23.99
24.99
22.49
23.49
14.99
NET 30
Terms
Customer Service: 1-877-626-3532
Description
2 x 2 equalized
2 x 4 equalized
1 x 4 equalized
1x2
1 x 4
ONLY
$172.00
187.00
175.00
152.00
162.00
RDL Application Specific Audio Modules
Professional Audio
Radio Design Labs is known, throughout the commercial sound industry, for innovative,
low cost, flexible solutions to difficult audio challenges. Their application specific
modules provide easy control, filtering, switching and distribution of audio signals,
in permanently installed systems. The ultra–compact Stick–OnSeries (ST) features
a durable bottom adhesive pad, for quick, permanent mounting nearly anywhere. High
quality screw terminal strips accept 14~30AWG wire. The compact Rack-Up Series
(RU) feature accessible user–friendly controls and displays, with the ability to mount up
to three units in a single rack space. The Flat–Pak Series (FP) feature durable, all metal
cases that may be directly screwed or bolted to cabinets or shelves. All controls and
connections are top mounted, allowing close placement of multiple modules. All Flat–Pak
modules are supplied with a power interconnect cable for daisy-chaining multiple
modules from a single power supply. Detailed description, specification and application
sheets are available on request.
RDL Audio
Line Amplifier
Use to reduce
the input level
to a machine
to improve
headroom, feed a
line level signal to a mic level input, or simply lower the
level of an audio line to match standard system levels.
Two–channel variable attenuator utilizes dual 15 turn
potentiometers for precise, independent adjustment of
each channel. Passive circuit requires no power, and
provides up to 85dB attenuation. Typical applications:
•Convert 8ohm, 25V or 70V speaker output to 600ohm
input (two channels) •Convert Hi-Z line level source to
Hi-Z mic input (two channels) •Convert 8ohm speaker
to line input (two channels) •Convert balanced Lo-Z
line level to balanced Lo-Z mic input (one channel)
Allows bridging
any audio line,
adjusting the
gain, and driving
a balanced or
unbalanced line.
Circuit design allows input to accept either balanced
or unbalanced signals, of either high or low impedance.
Instrumentation type input stage amplifies the
differential input, regardless of ground reference. The
output is capable of driving high or low impedance,
balanced or unbalanced loads. Typical applications:
•Single channel line amplifier •Precise matching of audio
levels •Isolation of ground loops •High to low or low
to high impedance conversion •Power requirements:
24~30VDC floating or 12~15VDC bipolar supply,
50mA •Dimensions: 1.55" (H) x 3.00" (W) x 0.65" (D)
Order #
555-STP-1
Order #
555-STA-1M
ONLY
$53.49
RDL
Microphone
Preamplifier
Compact,
high quality
preamplifier
converts balanced
or unbalanced
mic input, to dual, balanced or unbalanced, isolated
+4dBu line level outputs, for use with commercial
sound equipment. Additionally, the input will accept
low impedances, such as a 4ohm or 8ohm speaker, for
use in intercom applications. Output is adjustable from
35~65dB gain. Separate phantom power insertion allows
the use of an external phantom power supply, up to
48VDC. Unit requires a 24~33VDC, 25mA ground
referenced power supply, which may also be tied to the
phantom input for single power supply use. Unit may
be operated with supply as low as 9VDC, with
reduced headroom.
Order #
555-STM-2
ONLY
$124.00
RDL Two–Watt
Utility
Amplifier
ONLY
$94.49
RDL Voice
Activated
Relay
Versatile
module accepts
unbalanced line
or mic level
signal and
provides switched DPDT contacts. An open collector
output is also provided for slave units. Applications
include converting PTT (push to talk) function to hands
free, automatic muting and audio signal sensing for
auto–power–on function. Sensitivity and release delay
are adjusted via individual 25 turn potentiometers.
Specifications: •Mic input: 5KΩ •Line input: 500KΩ
•Activation response: 5ms •Release delay: 70~260ms
•Relay contacts: DPDT, 2A •Power requirement:
24~33VDC, 30mA ground referenced
Order #
555-ST-VOX1 ONLY
$92.69
RDL Audio
Controlled
Relay
Perfect for use as
a local monitor
amplifier and
with music-onhold telephone
systems. It features a single unbalanced audio input,
with adjustable gain, and two outputs. The first output
delivers 2W RMS into an 8ohm load, the second delivers
up to +12dBu into a 600ohm load, typical of telephone
music–on–hold inputs. Both outputs may be used
simultaneously. Specifications: •Frequency response
(600ohm): 20Hz~30KHz •Frequency response (8ohm):
35Hz~30KHz •THD: 0.5% •Input: 10Kohm, -15dBV
(line level) •Power requirements: 24~33VDC, 150mA,
ground referenced
Accepts balanced
or unbalanced
input, and
provides a DPDT
relay output when
the presence of an audio signal is detected. It is perfect
when adding “audio–power–on” capability to existing
equipment. Because the relay utilizes NO and NC
contacts, it may also be used in “silence sensing”
applications. Trigger threshold is adjustable from
–30dBu~0dBu. Adjustable, 5~50 second, off delay sets
the time required to for the relay to release when the
audio drops below threshold. A 50mA open–collector
output is also provided to drive a slave relay or indicator
LED. Specifications: •Contact rating: 2A, 250VAC
•Input impedance: 10Kohm •Power requirement:
24~33VDC, 50mA, ground referenced
Order #
555-ST-PA2
Order #
555-ST-ACR2
ONLY
$60.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
4
RDL
Distribution
Amplifier
Audio distribution
amplifier allows
bridging of any
audio line,
adjusting the gain
(0~+20dB), and driving either high or low impedance,
balanced or unbalanced loads. Typical applications:
•Audio distribution with up to 3 outputs •Bridging
a line for local distribution •Distribution with impedance
conversion •Distribution with gain or loss •Inputs and
outputs RF bypassed •Power requirements: 24~30VDC
floating or 12~15VDC bipolar supply, 50mA
Order #
555-ST-DA3
ONLY
$120.00
RDL Electronic
Transformer
Pair
Perfect for any
line amplification,
impedance
or balanced/
unbalanced
conversion, this two channel line amplifier features
bridging inputs, adjustable gain (up to 20db), or
attenuation, and low impedance outputs, which act as
both an electronic line transformer and a line amplifier.
True DC amplifiers produce unsurpassed audio clarity,
high common-mode rejection and ultra–low distortion.
Typical applications: •Balanced to unbalanced
conversion•Unbalanced to balanced conversion•High
to low impedance conversion •Low to high impedance
conversion •Bridging audio line feeds •Precise matching
of audio levels •Power requirement: 24~30VDC floating
or 12~15VDC bipolar supply, 50mA
Order #
555-STA-1
ONLY
$127.00
RDL Two
Channel High
Output Line
Amplifier
Many audio
products provide
optimum
performance
when feeding a bridging input, but may not provide
output needed to directly drive low impedance lines
terminated with 600ohm transformers. Specifically
designed for such installations, this is also ideal when
high gain line level audio transmission is required. Audio
inputs are bridged at 5Kohm and gain is adjustable from
unity to +24dB via a precision 25–turn potentiometer.
Outputs are designed to drive long balanced audio lines
into 600ohm loads. Audio circuits DC coupled for the
ultimate in pure, transparent audio clarity. Input and
output circuits function as electronic transformers,
permitting either balanced or unbalanced connection.
Typical applications: •Conversion from balanced to
unbalanced •Conversion from high to low impedance
•Power requirements: 24~30VDC floating or 12~15VDC
bipolar supply, 50mA
Order #
555-STA-2
ONLY
$134.00
ONLY
$85.49
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
89
4
RDL Universal
Audio
Attenuator
Section
Section
4
Professional Audio
RDL Balanced to
Unbalanced Convertor
4
RDL Remote
Operated
Video Switch
Modules
Versatile switching module provides switching control
of standard NTSC composite video signals. This unit
features an A and B input, with a single output. A/B
switching requires simple SPST switch closure. •BNC
female input and output connections •Screw terminal
connections for switch contacts and power •Requires
12~33VDC, 30mA
Order #
555-TX-MVX
ONLY
$85.49
RDL Adjustable Line Transformer
•Provides transformer isolation between
balanced line and unbalanced input
•Trim pot attenuation adjusts output
from 4~24dB below input •Input may be
10Kohm bridging or 600ohm terminated
•Frequency response: 20Hz~20KHz
•THD: <0.05% •Passive device requires
no power
Order #
555-TX-1A
ONLY
$30.00
RDL Bridging Input Transformer
•Add transformer isolation to any line
level input •Use as a 10Kohm input
bridge on any audio line •Provides
balanced input and output •Frequency
response: 20Hz~20KHz •THD: <0.05%
•Passive device requires no power
Order #
555-TX-10B
ONLY
$34.49
RDL Line Matching Transformer
•Matches balanced 600ohm phone (or
other line) into mic or line input •Dual
outputs; unbalanced line level and
balanced mic level •Frequency response:
20Hz~20KHz •THD: <0.05% •Passive
device requires no power
Order #
555-TX-LM2
ONLY
$31.49
RDL 100/70/25V Line Input Interface
•Matches a 100V, 70V or 25V speaker line to
any unbalanced line level audio input •Perfect
when adding powered subwoofers to existing
70V distributed systems •Trimpot adjusts
output level for various input voltages/power
levels •Frequency response: 20Hz~20KHz
•THD: <0.05% •Passive device requires
no power
Order #
555-TX-70A
A
B
Order #
555-PS-24A
555-PS-24K
555-PS-24U2A
page
90
Device features two identical
active (transformerless)
channels that accept balanced
input, via XLR female connectors, and provide
unbalanced outputs, via RCA type female connectors.
They are perfect for integrating commercial sound and
high–end home theater equipment in the same system.
Individual gain trim adjustments are provided for each
channel. Specifications: •Frequency response:
10Hz~40KHz •THD: <0.005% •Power requirement:
24VDC, 50mA, ground referenced
Order #
555-FP-BUC2
ONLY
$152.00
RDL Unbalanced to
Balanced Convertor
Device features two identical
active (transformerless)
channels that accept unbalanced
input, via RCA type female
connectors, and provide
balanced outputs, via XLR male connectors. They are
perfect for integrating commercial sound and high–end
home theater equipment in the same system. Individual
gain trim adjustments are provided for each channel.
Specifications: •Frequency response: 20Hz~40KHz
•THD: <0.05% •Power requirement: 24VDC, 50mA,
ground referenced
Order #
555-FP-UBC2
Designed specifically
for use with all RDL
modules. All models
are single ended,
24VDC output.
Output Current
500mA
1A
2A
ONLY
$19.99
26.49
58.49
ONLY
$150.00
RDL Stereo
Automatic Level
Control
Ideal in applications
where consistent
audio level is needed
from stereo sources
with varying output, such as multiple CD changers,
satellite or broadcast television receivers. It maintains
consistent –10dBv output for input signal variations as
great as 25dB. Because the mid and high band audio
frequencies are controlled separately, the level pumping
effect, often associated with automatic gain and
compression, is minimized. The AGC and compression
attack release times adjust according to the program
material to further reduce any audible effects of the
module. Additionally, when audio levels fall, and remain
below a level appropriate to that source, the module stops
increasing the gain. As audio levels fade out, the module
tracks the level for a natural sound. These features
combine to produce nearly inaudible adjustment yet
consistent levels without the listener fatigue associated
heavily compressed music dynamics. Input and outputs
are line level, 10Kohm unbalanced. All connections
are RCA type female. Requires 24VDC, 80mA,
ground referenced.
Use in any application
requiring mixing
of two audio sources.
A mic may be mixed
with a line level music
source. Two mics may be mixed to feed the mic or line
level input of a power amplifier. A mic or professional
+4dBu line level mono sum is possible. It may be used
to convert mono line level signals from consumer to
professional, or from professional to consumer format.
It may also be used as a microphone preamplifier, or
conversely to adapt unbalanced or balanced line level
signals into the microphone input of other equipment.
Unit requires a 24~33VDC, 60mA ground referenced
power supply.
Order #
555-ST-MX2
ONLY
$117.00
RDL Line Level
Mixing Amplifier
Three channel audio
mixer combines up to
three line level signals
to a single line level
output. The input
circuit accepts either balanced or unbalanced signals,
either high or low impedance. The output is capable of
driving high or low impedance, balanced or unbalanced
loads. Gain on each input channel is individually
adjustable from –14~+24dB. Outputs from multiple
units may be connected in parallel to form a multi
channel mixer. Power requirements: 24~30VDC
floating or 12~15VDC bipolar supply, 55mA.
Order #
555-ST-MX3
ONLY
$108.00
RDL Six–Watt
Utility Amplifier
Compact single–channel
amplifier features two
balanced audio inputs,
with adjustable gain, and
delivers 6W RMS to an
8ohm load. Since each input is mixed equally, it is perfect
for monitoring a stereo line from a single speaker. Built–in
equalization circuit provides adjustable 0~5dB gain at
60Hz, for enhanced low frequency response. The output
stage features auto resetting short–circuit and thermal
overload protection. Specifications: •Frequency response:
35Hz~20KHz •THD: 0.35% •Input: 10Kohm, 400mV
(line level) •Power requirements: 24~33VDC, 350mA,
ground referenced
Order #
555-ST-PA6
ONLY
$84.49
RDL SPDIF
Repeater/Amplifier
Use in applications
requiring stereo audio distribution with four outputs, or
mono distribution with eight outputs. This unit provides
multiple, isolated audio feeds, individual line level
controls, audio presence indicators and gain from
–15~+18dB. Input and output connections are made
via a full size screw terminal strip, on the rear panel, and
accept any combination of balanced or unbalanced wiring
configurations. Gain for each channel is individually
adjusted via a front–panel screwdriver gain control.
Use where SPDIF signal levels
need to be boosted or recovered,
or where a digital audio signal
needs to be converted between
coaxial and optical. Single
channel module features
BNC, phono and optical inputs
(conventional SPDIF format), any one of which may be
used, and the coaxial input has priority over the optical
input. BNC, phono and optical outputs are provided.
Either of the coaxial jacks, and/or the optical output
may be connected simultaneously. High input sensitivity
permits operation with coaxial input levels as low as
100mV. The module detects and amplifies low signals,
and reshapes the output for minimum jitter. Installation at
the receiving end of a weak SPDIF line restores the signal
level to its correct amplitude, and extends the useful range
to avoid signal dropouts. Front panel LED illuminates
when sufficient input signal is received to produce the
correct output from the module. Requires 24VDC,
80mA, ground referenced.
Order #
555-RU-DA4D
Order #
555-FP-SPR1
Order #
555-FP-ALC2
ONLY
$31.49
RDL Power Supplies
Fig.
A
B
B
RDL Universal
Audio Mixer
ONLY
$215.00
RDL Audio
Distribution
Amplifier
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$219.00
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$129.00
YEAR LIMITED
5WARRANTY
Professional Audio
YEAR LIMITED
5WARRANTY
Mfr. #
A-705
A-712
A-724
MB-25B
Power Output
ONLY
60W RMS
$583.00
120W RMS
629.00
240W RMS
609.00
Optional rack mount kit
22.49
This series
is ideal for small scale paging, music distribution and
message–on–hold (MOH) applications. Each model
includes one paging input for microphone or telephone,
and two auxiliary inputs for music or other line level
sources. Mute function operates automatically or may be
switched manually, and allows the mic/telephone input to
override the aux input, without affecting the MOH output.
Aux input sensitivity is adjustable from line level to 1W @
8ohm, allowing compatibility with a variety of telephone
paging outputs and existing sound sources. Optional rack
mount hardware allow single, or two side–by–side units to
be mounted in standard 19" rack. •UL and cUL listed •Five
year limited warranty
Order #
555-8135
555-8140
555-8141
555-8142
Mfr. #
BG–115
BG–130
MB–25B–BK
MB–25B–J
Power Output
15W RMS
30W RMS
Single rack kit
Double rack kit
ONLY
$159.00
179.00
17.99
19.49
Gold Seal Series
Mixer Amplifiers
✔2 input mixer-amplifier
✔Ultra compact size
✔Internal tone control preset
Internally adjustable tone control allows you to
contour the amplifier to your situation. Ideal for a
variety of applications such as background music in
a doctor’s waiting room, relaying fast-food restaurant
orders from counter to kitchen or sound reinforcement
in a small church. The unit is protected by both thermal
and over-current circuit breakers. Outputs: •8ohm
•25V •70V Specifications: •Output power: 6W RMS,
from 75Hz~15KHz, with not more than 2% THD
•Dimensions: 25⁄8" (H) x 8 1⁄2" (W) x 6" (D) •Mfr. #GA-6A
Order #
555-3605
ONLY
$147.00
Model #
GS-60
GS-100
GS-150
GS-250
Description
60 watt
100 watt
150 watt
250 watt
Compact rugged PA amplifiers are perfect for small
paging and background music applications. Units provide
outputs for conventional 4/8/16ohm speakers, as well
as distributed 25V and 70V systems. Features: •Lo–Z
balanced MIC-1 input •Switchable MIC-2/Aux input
•Transformer isolated 600ohm telephone input •Front
panel controls for MIC-1, MIC-2 and treble level
•Discrete complimentary output transistors for
reliability •Dimensions: 27⁄8" (H) x 113⁄8" (W) x 73⁄8" (D)
Order #
80-1310
80-1315
Model #
C10
C20
Power Output
10W RMS
20W RMS
ONLY
$155.00
205.00
Classic Series Amplifiers
Inputs: Six Lo-Z balanced microphone, 2 Hi-Z auxiliary
sources and a telephone paging input Mics 1 through 4
use XLR-type connectors, Aux input is via RCA phono
jacks and all other connectors use screw terminals.
Phantom power is supplied for use with condenser
microphones. Microphone precedence connections
are included for mic 1, 2, 3, 5/Tel, 6/Aux 1 and Aux 2.
Outputs: •Taps for 4ohm and 8ohm speakers, and for
25V, 25VCT, 70V and 100V line •Line out for booster
amp and tape recorder •Preamp out/power amp in loop
is provided •Dimensions: 31⁄2" (H) x 161⁄2" (W) x 12" (D)
Order #
555-3520
555-3525
555-3530
555-3535
✔2 input mixer-amplifiers
✔VOX and contact muting
✔Front panel treble control
✔4 input mixer-amplifiers
✔VOX and contact muting
✔Bass and treble controls
✔7 input mixer-amplifiers
✔VOX and contact muting
✔10 band equalizer
6 Watt Compact Amplifier
Classic Series
Compact Amplifiers
4
Order 555-8100
555-8105
555-8110
555-8166
4
BG
Series
Compact
Mixer/
Amplifiers
700 Series Mixer/Amplifiers
This series offers versatile features and outstanding
value for installed sound applications such as
boardrooms, educational facilities and houses
of worship. Nine total inputs include six mic/line inputs,
two auxiliary line inputs and a single 900 Series module
port. Each mic/line input includes a mic trim control and
23VDC phantom power. Speaker outputs include 70V,
25V and 4ohm. Auxiliary line output can be used for
recording or connection to an external booster amplifier.
Auto–mute function provides voice–activated (VOX)
priority override. Rear panel dip switches allow
independent assigning of inputs to activate or respond
to the muting function. Muting can also be activated
with an external dry contact closure. Additional features:
•Channel and master volume controls •Independent bass
and treble controls •Processor insert jacks •Output level
meter •Optional remote operation of master volume
and power on/off •Short circuit and thermal protection
circuitry •UL and cUL listed •Five year limited warranty
Section
ONLY
$494.00
588.00
549.00
862.00
This rugged PA amplifier series is perfect for paging and
background music applications in public areas including
offices and retail space. Units provide outputs for
conventional 4/8/16ohm speakers, as well as distributed
25V and 70V systems. Features: •Lo–Z balanced MIC
input •Hi–Z AUX input •Telephone input •Switchable
MIC/Aux input •Transformer isolated 600ohm telephone
input •Line level output for recording or external booster
amplifier •Front panel controls for MIC-1, AUX/MIC-2,
AUX, bass and treble level •Discrete complimentary
output transistors for reliability Specifications: •THD
(4ohm output): <0.5% at rated power •THD (others):
<1% at rated power •Frequency response (4ohm
output): 20Hz~20KHz •Frequency response (others):
70Hz~16KHz •Output connections: Screw terminal
•Input connections: Screw terminal, RCA female
for AUX •Dimensions: 33⁄4" (H) x 141⁄2" (W) x 11" (D)
Order #
80-1320
80-1325
80-1330
Model #
C35
C60
C100
Power Output
35W RMS
60W RMS
100W RMS
ONLY
$285.00
369.00
429.00
NEW!
AM/FM Digital Tuner
AM/FM Digital Tuner
The ideal mate for the PR330A Stereo Amplifier, this
quartz locked tuner is compatible with any amplifier with
line level inputs. The IR remote control included with the
PR330A will operate this tuner. Features include: •Bright
fluorescent digital display •20 station memory •Auto
station scanning •Signal lock indicator RCA pre-amp out
•Included AM and FM antennas •Dimensions: 16" (W) x
4" (H) x 9" (D) •Black color •Mfr. #PR33T
The ideal mate for the Pyramid PR530A stereo amplifier,
this quartz locked tuner is compatible with any amplifier
with line level inputs. It is ideal for use as a sound source
for background music and paging systems, as well as a
component in any home theater system. Features: •Bright
fluorescent digital display •Eighteen station memory •Auto
station scanning •Signal lock indicator •RCA pre–amp out
•Included AM and FM antennas •Dimensions: 14" (W) x
33⁄4" (H) x 91⁄2" (D) •Black color •Mfr. #PR532T
The Bogen DST1 digital tuner is ideal as a background
music source in sound systems of all sizes. It incorporates
a digital PLL-synthesized tuner for precise reception of
FM and AM signals. Features: •Large, easy-to-read LCD
display panel •60 presets total (FM and AM), with scan
feature Includes: •FM dipole antenna and AM loop
antenna •Hand held IR remote control •Rack mount ears
Order #
50-6045
Order #
50-6046
Order #
555-3626
(ea.)
$79.99 (2-up)
$70.95
Follow us on:
Product Questions Email: tech@MCMelectronics.com
(ea.)
$74.99
(2–up)
$64.95
Rackmount AM/FM Tuner
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$225.00
page
91
Section
4
Professional Audio
Strategy Series
35 Watt Mixer/
Amplifier
4
Single
Input Power
Amplifier
Perfect when
a background music
system does not require additional
functionality of paging inputs or muting. It is also
perfect when zones need to be added to an existing
system. This single input amplifier accepts either balanced
or unbalanced line level inputs and provides 100V, 70V
and 4ohm speaker output. Features: •Screw terminal
balanced inputs •L/R RCA unbalanced inputs (summed
mono) •Switchable loudness contour •Power, peak and
signal LED indicators Specifications: •Power output:
60W RMS •THD 0.5% at rated power •Dimensions:
3.66" (H) x 8.27" (W) x 14" (D)
Order #
555-9260
555-9265
Model
PA601
Rack mount kit
ONLY
$239.00
22.99
Atlas Learn Wireless
Classroom PA System
The Atlas Learn AL2430
system is an in-classroom
sound reinforcement
solution designed for use in
K-12 and higher education
facilities or where a room
constrained public
address system is
required. This complete
#555-10600
audio enrichment package
consists of amplifier/receiver,
wireless microphones, and
docking station designed to
allow the teacher and students
to walk freely around the room
with the infrared microphones/
system control units and project
#555-10605
their voices through installed
speakers. Features: •Works in conjunction with secondary
systems to provide enhanced classroom security •Provides
excellent infrared wireless sound reinforcement •Easily
integrates into any classroom •Keeps speakers’ voice
healthy and sustainable •See MCMelectronics.com for
more information
Order #
555-10600
Optional headset mircophone
555-10605
ONLY
$1054.50
48.99
Compact amplifier is designed for
distributed business paging and background music
systems, small to medium speech privacy systems.
A dip switch selectable matrix allows the creation of a
zone to mix from any or all of the input sources for music
or messaging on hold (MOW) applications. 25V, 70V
and 8ohm speaker outputs are provided to accommodate
a variety of distributed systems. Input #1: •Balanced
screw terminals •Selectable mic, line or telephone level
•Switchable phantom power Input #2: •L/R RCA female
(summed mono) line level Input #3: •L/R RCA female
(summed mono) line level Features: •Front panel bass
and treble controls •Vox mute with adjustable sensitivity
•N/O contact mute •1W/8ohm and 600ohm MOH outputs
with adjustable level •Switchable 400Hz high pass filter
for use with paging horns •Power, peak and signal LED
indicators Specifications: •Power output: 35W RMS
•THD 0.5% at rated power •Dimensions: 3.66" (H) x
8.27" (W) x 10.87" (D)
Order #
Model
ONLY
555-9230
AA35
$149.00
Optional Accessories
555-9235
600ohm input isolation transformer
26.99
555-9268
Volume control security cover
3.39
555-9265
Rack mount kit
22.99
Economical wall mount FM
radio/receiver is designed to
provide background music over a
PA system, or music-on-hold to
a telephone system. Includes 1W
and line-level outputs to facilitate
compatibility with a variety of
paging/telephone systems. Built–
in speaker makes tuning easy.
LED indicator illuminates when
the signal is strongest, and AFC
prevents signal drift. Tone and
output volume controls are
screwdriver adjustable. Screw
terminals are provided for
outputs, antenna and 24V power source. Also has attached
telescopic antenna. Specifications: •Tuning range:
87.5~108.5MHz •Sensitivity: 8mV •Power requirements:
12VDC or 24VDC, 250mA •Dimensions: 515⁄16" (H) x
33⁄8" (W) x 11⁄2" (D)
Order #
555-3630
555-3645
Model # FMR
PRS40C
Description
FM tuner
Power supply
ONLY
$79.99
19.99
General purpose matching
transformer allows proper connection
between high and low impedance
inputs and outputs. Bi–directional device
may be used to balance an unbalanced line,
or provide isolation between two pieces
of equipment. It may also be used to
produce a balanced mic level signal
from a line level source such as a
CD, DVD or tape player, or computer
sound card. Primary: 10Kohm, RCA
type male connector. Secondary: 600ohm center tapped,
with screw terminals. Steel enclosure measures 23⁄8" (H) x
2" (H) x 11⁄4" (D) and includes mounting ears.
Order #
555-6965
Order #
555-2855
92
#555-9245
ONLY
$399.00
559.00
26.99
18.99
3.39
18.99
18.99
NEW!
Strategy Series Mixer/Amplifiers
This AA120M amplifier is identical to the
popular AA120 model from Atlas Sound, with the addition
of a module bay for a selection of three input modules,
listed below. This allows a single amplifier model to be
configured with exactly the features needed for a particular
installation. All other optional accessories for the AA120
are compatible with the AA120M. Complete information
on various input modules and accessories may be found
on MCMelectronics.com.
Order # Model Description
ONLY
555-9245 AA120M 120W RMS output power
$429.00
Modules
555-9246 AA-ML Mic/line input
47.99
555-9247 AA-TG Three tone chime generator
43.99
555-9248 AA-SMG Sound masking generator
69.99
Optional Accessories
555-9235
600ohm input isolation transformer26.99
555-9255
Rack mount kit
18.99
555-9268
Volume control security cover
3.39
555-9266
Remote volume control (white)
18.99
555-9267
Remote volume control (ivory)
18.99
Matching Audio Transformer
Perfect in public areas,
museums, retail stores and
displays, where recorded
messages are repeatedly played.
The Minimac allows the user to
record up to 4 minutes of crystal clear
audio. Once recorded, the unit may be
triggered to playback via contact closure. 4W RMS
amplifier allows the unit to drive a speaker directly,
or line level output may be fed into existing system.
Features: •Line level and mic input •Stores up to four
messages, may be selected individually, or sequenced
•See MCMelectronics.com for complete information
including specifications and detailed manual
page
Order #
Model
Output Power
555-9240 AA120
120W RMS
555-9250 AA240
240W RMS
Optional Accessories
555-9235 600ohm input isolation transformer
555-9255 Rack mount kit
555-9268 Volume control security cover
555-9266 Remote volume control (white)
555-9267 Remote volume control (ivory)
Wall Mount FM Tuner
Minimac® Compact
Audio Message
Repeater
ONLY
$251.00
Strategy Series Mixer/Amplifiers
These AA120 and AA240 amplifiers were engineered
with unique features to assist the contractor in today’s
commercial business audio environment. Six-input units
feature extensive muting and output options along with
a very unique bridge in/out feature to allow combining
of multiple amplifiers. VCA input allows remote level
adjustment of either the BGM input or the entire amplifier.
Input #1: •Balanced screw terminals •Selectable mic, line
or telephone level •Switchable phantom power Input
#2~5: •Balanced screw terminals •Selectable mic or line
level •Switchable phantom power Input #6: •L/R RCA
female (summed mono) line level Features: •Front panel
bass and treble controls •VOX mute with adjustable
sensitivity •N/O contact mute •1W/8ohm and 600ohm
MOH outputs with adjustable level •Power, peak and
signal LED indicators Specifications: •THD 0.5% at rated
power •Dimensions: 4.22" (H) x 16.54" (W) x 14.02" (D)
Mfr. #
WMT1A 1-800-543-4330
Fax: 1-800-765-6960
Digital FM/AM Tuner
with 30 Presets P-FA
•Signal strength LED display and adjustable 1W
output for music on hold •117V AC •50/60Hz
•13⁄4" (H) x 161⁄2" (W) x 7" (D)
Order #
555-235
ONLY
$33.99
NET 30
Terms
Customer Service: 1-877-626-3532
(1-3)
$193.00
(4-up)
$180.00
Professional Audio
NEW!
Stadium Horn Loudspeakers
#555-10020
AH Series 15" Stadium
Horn Loudspeakers
Perfect when maximum power capacity and SPL are required.
Three dispersion patterns are available to suit a variety of
needs. All models feature high efficiency ratings and high
power capacity, perfect for the most demanding environments.
Features: •15" cast frame woofer •Concentrically mounted 1"
compression driver •Included mounting bracket for attachment
to flat surfaces Specifications: •Power capacity: 250W RMS
•Frequency response: 75Hz~14.5KHz •Impedance: 8ohm •See
MCMelectronics.com for complete details, mounting and application
information, and A/E specifications
Order #
Mfr. #
555-10000
AH5040S
555-10010
AH6565S
555-10020
AH9040S
Sensitivity (W/M) 104dB
102dB
102.5dB
Dispersion
(H x V)
50° x 40°
65° x 65°
90° x 40°
#555-10000
Dimensions
(H x W x D)
20.5" x 20.5" x 32"
20.5" x 20.5" x 32"
22.5" x 30" x 31"
Weight
(lbs.)
125
125
152
ONLY
$1075.00
1075.00
1075.00
AH Series 12" Stadium Horn Loudspeakers
Commercial Duty
Stereo Power Amplifiers
Model #
Sensitivity (W/M)
AH99-12ST
101dB
AH94-12ST
103dB
AH66-12ST
101dB
Dispersion (H x V) Dimensions (H x W x D)
90° x 90°
25.7" x 22.1" x 22.6"
90° x 40°
24.7" x 22.1" x 22.6"
65° x 65°
23.9" x 21.4" x 22.6"
Weight (lbs.)
ONLY
136
$849.00
127
849.00
130
849.00
Order #
555-10100
555-10110
Model #
CP400
CP700
Perfect when high power capacity and SPL are required, in a compact stadium horn
configuration. Three dispersion patterns are available to suit a variety of needs. All models
feature high efficiency ratings and high power capacity, perfect for the most demanding
environments. 70V transformers allow simplified installation in multi speaker installations,
and enable use with very long runs of speaker cable. Direct 8ohm connection is also
available, allowing improved frequency response. Features: •8" cast frame woofer
•Concentrically mounted 1" compression driver •Included mounting bracket for attachment
to flat surfaces Specifications: •Power capacity: 100W RMS •Frequency response:
90Hz~15KHz •Transformer taps: 7.5W, 15W, 30W, 60W, 8ohm bypass •Dimensions below are approximate
•See MCMelectronics.com for complete details, mounting and application information, and A/E specifications
Order #
555-10060
555-10070
555-10080
Model #
AH99-8ST
AH94-8ST
AH66-8ST
Sensitivity (W/M)
101dB
101dB
100dB
Dispersion (H x V)
90° x 90°
90° x 40°
65° x 65°
Dimensions (H x W x D)
21.9" x 19.7" x 19.7"
20.1" x 19.7" x 19.7"
21.0" x 17.9" x 21.0"
Weight (lbs.)
102
100
102
ONLY
$575.00
575.00
575.00
AH Series 15" Stadium Horn Subwoofer
Ideal in outdoor stadium and large public areas where extended low
frequency response is required. Perfect when sporting events are coupled with music and other
entertainment. Excellent results may be achieved by mounting this unit under bleacher seating.
Rear firing, horn loaded design provides tremendous SPL with very high efficiency and high
power handling. Features: •15" cast frame woofer •Rear firing woofer cavity and mesh screen
over the enclosure •Weather resistant connection via recessed terminal block •Secure surface
mounting or suspension installation via the integral forged eyebolts •500W power handling •Max
output of 127dB (rated power at 1m) Specifications: •Power capacity: 250W/500W RMS/peak
•Frequency response: 55Hz~120Hz •Sensitivity: 103dB (W/M) •Dispersion: Omnidirectional •Impedance:
8ohm •Dimensions: 30.1" (H) x 30.0" (W) x 28.2" (D) •Weight: 280 lbs. •See MCMelectronics.com for complete
details, mounting and application information, and A/E specifications
Order #
555-10090
Model #
AHSUB15S
Follow us on:
Product Questions Email: tech@MCMelectronics.com
ONLY
$1305.00
Output
240W x 2CH
400W x 2CH
ONLY
$479.00
529.00
P-240A Professional 240
Watt RMS Power Amplifier
Automatic overload protection 4 and 8ohm, 70 and
25 volt outputs, booster/tape output, 117VAC, 50/60Hz,
53⁄8" (H) x 161⁄2" (W) x 111⁄2" (D). Rack mountable
with RKMB-4.
Order #
555-215
AH Series 8" Stadium Horn Loudspeakers
NEW!
Professional grade audio power amplifiers are specifically
designed for demanding contractor applications. They are
ideally suited for large scale indoor and outdoor speaker
installations, and are perfect for use with the Atlas line of
stadium horns. Esoteric grade toroidal supply and output
transformers are utilized, providing outstanding reliability
and extended frequency response, even through the 70V
output. Independent channels are driven by separate power
supplies to ensure maximum channel separation and ultra
low distortion figures. Features: •Stereo, parallel or
bridged mono operation •25V, 70.7V and 100V outputs for
stereo operation •140V or 200V bridged mono operation
•Direct outputs suitable for 2Ω, 4Ω and 8Ω loads •Rear
panel gain adjustments for each channel •Balanced XLR
and screw terminal inputs •Feedthrough XLR outputs
•Automatic dual speed fan cooling •Short circuit, thermal,
and DC offset protection •UL listed •Power ratings below
are both channels driven, at 4ohm •See MCMelectronics.
com for complete details and A/E specifications
Perfect when high power capacity and SPL are required, without the need or
available space for the full size 15" version. Three dispersion patterns are available to suit a
variety of needs. All models feature high efficiency ratings and high power capacity, perfect
for the most demanding environments. 70V transformers allow simplified installation in
multi speaker installations, and enable use with very long runs of speaker cable. Direct
8ohm connection is also available, allowing improved frequency response. Features: •12" cast
frame woofer •Concentrically mounted 1" compression driver •Included mounting bracket for
attachment to flat surfaces Specifications: •Power capacity: 200W RMS •Frequency response:
80Hz~15KHz •Transformer taps: 7.5W, 15W, 30W, 60W, 8ohm bypass •See MCMelectronics.com
for complete details, mounting and application information, and A/E specifications
Order #
555-10030
555-10040
555-10050
4
(1-3) $550.00 (4-up)
$514.00
Professional 30W PA
Amplifier with Digital
AM/FM Tuner
Ideal in office environments, retail stores and public
areas, for general paging and background music
applications. Inputs include two microphone, one
line level auxiliary, and one telephone page input.
Features: •AM/FM digital tuner with 30 station presets
•Voice activated priority page •Built–in telephone paging
and music–on–hold •Independent bass and treble controls
•Screw terminal strip for connection of 4ohm, 8ohm, 70V
and 25V speaker systems •19" rack mount hardware is
included Specifications: •Power output: 30W RMS
•THD: <0.1% at rated power •Frequency response:
30Hz~20KHz •Dimensions: 33⁄4" (H) x 161⁄2" (W) x
111⁄2" (D) •Power requirements: 117/220VAC, 50/60Hz
Order #
555-7300
MCMelectronics.com
Email: quotes@MCMelectronics.com
Mfr. #
P-30FA
(1–3)
$329.00
(4–up)
$312.00
page
93
4
The AH Series Stadium Loudspeakers offer the most often requested coverage patterns while providing excellent
intelligibility for the most challenging environments including large auditoriums and sport fields. They are the perfect
choice for high-energy music playback at sporting events and extended range speech reinforcement for large venues.
90° (H) x 90° (V) models are suggested for shorter loudspeaker–to–listener distances and/or wider coverage requirements
such as bleacher seating where the speaker may be in close proximity to the crowd. 65° (H) x 65° (V) square coverage
pattern models are perfect for down-firing applications including convention centers. 90° (H) x 40° (V) models work well
when longer speaker–to–listener distances require a tighter vertical coverage pattern. The 15" models offer an even tighter
pattern of 50° (H) x 40° (V). This is ideal when mounted atop football field press boxes and aimed at the visitor side, used
in conjunction with wider coverage pattern models covering the home side bleachers.
Features: •UV resistant, steel reinforced, injection molded fiberglass enclosures •Multiple stainless steel mesh screens
to protect from weather and pest damage •Heavy-duty stainless steel mounting brackets •Three dropforge eyebolts are
included for overhead suspension •Due to their large size, all models are shipped, via motor freight, directly from
Atlas Sound.
Section
Section
4
Professional Audio
NEW!
Multi Source/Multi Zone PA Amplifier
4
Professional PA
Amplifiers
Ideal in office environments, large meeting rooms
and public areas for general paging and background
music applications. A wide range of input and output
connections allow voice–over and telephone paging,
and music–on–hold applications. Front panel includes
individual level controls for each input, plus independent
master bass and treble controls. Input connections 1~3:
•Each accepts unbalanced 50Kohm line level signal via
dual RCA female jacks, or balanced 600ohm mic level
signal via screw terminal strips Paging input: •Three–pin
female XLR mic input accepts balanced, low impedance
mic level signal, with switchable VOX •Balanced
telephone input via screw terminal strip •Both inputs
feature adjustable page level and auto–mute •Screw
terminal connections are provided for dry contact external
mute switching Output connections: •Music on hold: 1W
@ 8ohm and 1V @ 600ohm •Speaker outputs: 4/8/16ohm,
plus 25V/70V for multi–speaker installations •All output
connections are screw terminal Specifications:
•Frequency response: 50Hz~15KHz •THD: <1% at 1KHz
(full rated output) •Power requirements: 120VAC,
50/60Hz
Order #
555-221
555-222
PBM Series PA Amplifiers
page
94
Order #
555-3130
555-3135
Mfr. #
PBM-30
PBM-15
Wattage
(1-3)
(4-up)
30W RMS $174.00 $162.00
15W RMS 151.00 141.00
Mfr. #
PMM-60A
PMM120A
Output Power (1-3)
(4-up)
60W RMS
$389.00 $362.00
120W RMS
514.00 479.00
Order #
555-9500
ONLY
$579.00
#555-9511
Model # Power Output
(1–3) (4–up)
PBM-120 120W RMS
$438.00 $401.00
PBM-60 60W RMS
314.00 291.89
Three channel mixer/amplifiers are available in 15W
and 30W RMS configurations to suit a number of paging,
background music and telephone interface requirements.
Channel one accepts microphone input and provides VOX
muting of the channel two aux/mic input. A third balanced
input allows connection to a telephone system interface
for phone paging. Separate music-on-hold output is
provided, with its own independent output level control.
Rear panel control allows paging level to be preset. Front
panel controls include: •Power •Bass •Treble •Channel
one level •Channel two level. Speaker outputs include
4/8/16ohm taps, plus 25V/70V line outputs for multiple
speaker applications. Channel two aux input is two RCA
type phono jacks (tied together internally). All other input/
output connections are screw terminal. Specifications:
•Frequency response: 50Hz~15KHz •THD: <1.0% •Input
sensitivity/impedance: TEL: 100mV/600ohm, MIC-1/2:
1.0mV/600ohm, Aux: 200mV/50Kohm •Power
requirement: 120VAC, 50/60Hz •Dimensions:
3.5" (H) x 10.7" (W) x 9.4" (D)
Order #
555-6300
555-6310
Six Input Mixer Amplifiers
Perfect for background music and general paging
applications, these amplifiers feature numerous inputs
for tremendous flexibility. All six input channels feature
individual level controls and balanced XLR microphone
inputs. Inputs #4~6 will also accept a line level signal. A
100mV/600ohm telephone input is also provided. Front
panel controls include separate bass and treble adjustments
and a master volume control. A three segment LED
bargraph display illustrates relative peak output. Outputs
are provided for 4/8/16ohm speaker systems and 25/70V
line distributed systems. Overall dimensions: 3.5" (H) x
16.9" (W) x 11.8" (D).
This advanced amplifier features a five input mixer, four
amplifier channels, in a 5 x 4 matrix configuration that
allows independent assignment of each input to each zone.
Each mixer channel features independent bass, treble and
gain controls, as well as a pushbutton for each zone,
allowing that input channel to play through any or all of
the four output zones. Each output channel has its own
level control. Features: •Simultaneous playback of five
sources in four zones •4Ω, 8Ω, 25V and 70V on each
output channel •Telephone paging function •Music on hold
output •Mic1 priority with VOX mute •Headphone output
with adjustable level •Inputs 1~3 are line/mic level
switchable, accept XLR or 1⁄4" connections, and provide
phantom power •Inputs 4, 5 are each L/R (mono pairs)
RCA unbalanced line level •3U housing sits on a shelf
or may be rack mounted Specifications: •40W RMS
per channel •Frequency response: 60Hz~17KHz ±3dB
•Dimensions: 5.25" (H) x 19" (W) x 12.2" (D)
•Mfr. #PL200M
Seven Zone Seven Input
Mixer Amplifier
The PL-260A amplifier from Speco provides 260W of
RMS power output, with a seven input mixer. Input #1~4
accepts mike level signal, input #6 and #7 accept line
level signal, and input #5 may be switched either way. All
mic inputs are XLR female and provide phantom power
(independently switchable). Output will drive 4/8/16ohm
speaker loads as well as 25V and 70V. A unique feature
of this amplifier is the built in zone selector, usable with
25V or 70V speaker systems. Divide large numbers of
connected speakers into seven zones, and control all
directly from the front panel of the amplifier. Features:
•Selectable VOX override on Mic-1 •Music on hold
output with separate level control •Telephone paging
input •Front panel master level, bass and treble controls
•24VDC external battery back-up input •Detailed
information available on MCM website •Mfr. #PL-260A
Order #
555-5595
(1-3)
$655.00
(4-up)
$615.00
NEW!
Stereo Mixer PA Amplifiers
These amplifiers provide a cost effective means of
delivering two-channel stereo audio to large scale
distributed 70V environments. Two stereo line level
sources can be mixed with a microphone and telephone
page, and played through a stereo amplifier, with 70V
output. The single XLR mic input can be configured to
the left right or both output channels, with individual level
controls for each. Telephone page input provides priority
paging, and can also be configured to output on either or
both output channels. Two stereo RCA line level inputs,
each with individual left and right level controls.
Features: •Front panel bass, treble, balance and master
volume control •Dual LED bargraph output level meters
•Music on hold output (600ohm and 8ohm/1W) •24VDC
battery input for emergency power •Dimensions: 3.5" (H)
x 16.9" (W) x 11.6" (D)
Order #
555-9510
555-9511
Mfr. #
PL60SA
PL120SA
Output (x 2CH)
30W RMS
60W RMS
ONLY
$479.00
599.00
100 Watt PA Mixer/Amplifier
✔5 input mixer-amplifier
✔8ohm and 70V use
✔Shelf top or rack mount
12VDC operation allows use in vehicles or
with other DC source where AC power is not
available. Includes plug in hand held push-to-talk
microphone, brackets and suction cups for dash mounting.
Auxiliary input allows amplification of one additional line
level source such as a tape player or radio. Specifications:
•Output: 10W RMS at 8ohm with less than 1% THD,
20W max •Frequency response: 50Hz~18KHz •Speaker
output: 8ohm •Inputs: 1⁄4", 4Kohm unbalanced
microphone, 1⁄4" 50Kohm auxiliary •Controls:
Independent mic and aux volume and master tone
•Power requirements: 12VDC, 3.5A max •Dimensions
11⁄4" (H) x 51⁄8" (W) x 71⁄2" (D) •Weight 1.1 lbs.
This rack mount professional public address amplifier
provides 100W RMS output, into an 8ohm load. Internal
five channel mixer accepts the following inputs: •(3)
microphone •(1) microphone/phono switchable •(1) line
level for CD, tape, tuner, etc. All microphone inputs accept
XLR type or 1⁄4" connections. Phono input is L/R RCA type
phono jacks (combined mono), CD/aux input, EQ in/out
and mixing bus are single RCA type phone jacks. Other
features include: •Notch type feedback filter •Front panel
master gain control •Lighted analog VU meter •LED
clipping indicator •Rack mount chassis with handles
•Heavy-duty aluminum heatsinks •Switchable 110/220V
operation. Push type connections provide 4, 8 and 16ohm
speaker output, plus 70V speaker line output for multiple
speaker installations. Front panel dimensions: 19" (W) x
4" (H). Chassis dimensions: 161⁄2" (W) x 31⁄2" (H) x
103⁄4" (D). Mfr. #PT610.
Order #
555-2065
Order #
555-7050
Mobile 20 Watt PA Amplifier
(ea.) $95.99
1-800-543-4330
Fax: 1-800-765-6960
(2-up)
$89.95
NET 30
Terms
Customer Service: 1-877-626-3532
(1-3)
$179.00
(4-up)
$160.53
Professional Audio
Compact
40 Watt
PA Mixer
Amplifier
Order #
555-9520
ONLY
$89.99
Signaling Tone Generator
Multiple tone generator is
designed to generate four
distinct signals; pulsed tone,
slow whoop, repeating chime
and steady tone. It is an
excellent source for alarm or
pre-announce signals in public address or telephone
paging systems. Each of the four signals may be applied
continuously (until interrupted), or limited to a doubleburst (except for the steady tone) for pre-announce
applications. Signals are triggered by an external device
providing a contact closure. Output level and pitch control
are adjustable. Accepts Hi-Z input from a program source
such as a tuner, turntable, cassette player, etc., and will
maintain precedence over the program material for the
duration of the contact closure. Requires 12~48VDC,
26mA, adaptor (PRS-40C) available separately. All input
and output connections are screw terminals. Dimensions:
63⁄4” (W) x 53⁄4” (H) x 2” (D). Mfr. #TG-4C.
Order #
555-3615
ONLY
$119.00
Voice
Activated Relay
This device monitors audio
activity over a wide range of input
voltages and operates a DPDT
relay. It may be used to detect voltages as low as
that directly from a microphone, or as high as from a
70V speaker system. Inputs include: Mic level, 600ohm
line level, 25V and 70V distributed speaker level. A low
level, transformer isolated, 600ohm output is also made
available for use with other equipment, allowing this to be
used as a balanced, low impedance microphone preamp.
Features: •Adjustable trigger threshold •Adjustable mic
preamp gain •Adjustable 0.25~20 second release delay
•Relay status LED •All input and output connections are
screw terminal •Requires 12~24VDC, 100mA, power
supply sold separately
Order #
555-2870
555-3645
Mfr. #
VAR1
PRS4-0C Description
Voice activated relay
12VDC, 300mA
ONLY
$99.99
19.99
40 Watt PA Mixer/Amplifier
✔USB/MP3 reader with IR remote control
✔8Ω and 70V speaker output
✔120VAC/12VDC operation
200 Watt PA Amplifier
45 input mixer-amplifier
48ohm and 70V use
4Shelf top or rack mount
Four input mixer amplifier accepts three microphone and
one line level input, delivering 40W RMS to conventional
8Ω speakers, or large scale distributed 70V systems. What
sets this apart is built-in USB and SD card readers, which
accept standard flash memory and thumb drives, and
directly reads MP3 and WMA audio files. Combined
with commonly available thumb drives which hold hours
of music, this mixer-amplifier becomes a self contained
background music system. MP3 features: •LCD display
of file being played •Pushbutton control for play/pause,
stop, repeat, track forward and reverse •IR control of all
track functions plus random play Features: •Level
controls for each input •Master bass and treble controls
•Fixed line level record output Specifications: •Power
output: 40W RMS •Mic inputs: 1⁄4" balanced •Aux input:
1
⁄4" unbalanced, line level •Record output: 1⁄4" unbalanced,
fixed line level •Speaker outputs: 4Ω, 8Ω, 16Ω and 70V
•Power requirements: 110VAC, 60Hz or 12VDC, 7A
•Dimensions: 41⁄8" (H) x 15" (W) x 10" (D)
•Model #USB-80
Rack mount professional amplifier provides 200W RMS
output, into an 8ohm load. Internal five channel mixer
accepts the following inputs: •(3) microphone •(1)
microphone/phono switchable •(1) line level for CD, tape,
tuner, etc. All microphone inputs accept XLR type or 1⁄4"
connections. Phono input is L/R RCA type phono jacks
(combined mono), CD/aux input, EQ in/out and mixing
bus are single RCA type phone jacks. Other features
include: •Notch type feedback filter •Front panel master
gain control •Lighted analog VU meter •LED clipping
indicator •Rack mount chassis with handles •Heavy-duty
aluminum heatsinks •Switchable 110/220V operation.
•Push type connections provide 4, 8 and 16ohm speaker
output, plus 70V speaker line output for multiple speaker
installations. Front panel dimensions: •19" (W) x 4" (H)
Chassis dimensions: •161⁄2" (W) x 31⁄2" (H) x 103⁄4" (D)
•Mfr. #PA-305
Order #
555-9750
Order #
555-3185
MSRP
$299.00
ONLY
$229.00
40 Watt PA Amplifier
Compact, versatile public address amplifier operates
on conventional AC power, or 12VDC via included
cigarette lighter cord. Three channel mixer/amplifier
accepts two mic and one auxiliary/phono input, provides
80W max output and will drive 4/8/16ohm and 70V loads.
Features: •Individual level controls for Mic 1, Mic 2 and
phono/aux inputs •Rear panel phono/aux selector for line
level, or magnetic phono level sources •Master level
control •Master tone control •12 segment LED bar graph
output meter •Quick push speaker connections •70V
output for compatibility with distributed audio systems
•Detachable IEC type AC power cord •Unswitched
convenience AC outlet •Mix bus connection for daisy
chaining multiple amplifiers Specifications: •Power
output: 20W/80W RMS/max •THD: 1% •Frequency
response: 80Hz~20KHz •Input sensitivity: 2.5mV (mic),
150mV (aux), 3.5mV (phono) •Power requirements:
120/240VAC, 50/50Hz or 12VDC @ 4A •Dimensions:
3.3" (H) x 12.75" (W) x 8.9" (D)
Order #
555-3187
Output Power
20W/80W RMS/max
40W/120W RMS/max
Follow us on:
Product Questions Email: tech@MCMelectronics.com
(2-up)
$160.00
Model #
PA105
(1-3)
$84.99
(4-up)
$78.95
✔3 input mixer-amplifier
✔Ceramic/magnetic selectable phono input
✔8ohm and 70V use
Compact public address mixer/amplifier accepts two
mic and one auxiliary/phono input, provides 120W max
output and will drive 4/8/16ohm and 70V loads. Features:
•Individual level controls for Mic 1, Mic 2 and phono/aux
inputs •Master three band equalizer •Rear panel phono/
aux selector for line level, or magnetic phono level
sources •Master level control •12 segment LED bar
graph output meter •Quick push speaker connections
•70V output for compatibility with distributed audio
systems •Detachable IEC type AC power cord
•Unswitched convenience AC outlet •Mix bus
connection for daisy chaining multiple amplifiers
Specifications: •Power output: 40W/120W RMS/max
•THD: 1% •Frequency response: 80Hz~20KHz •Equalizer
frequencies: 100Hz, 1KHz and 8KHz •Input sensitivity:
2.5mV (mic), 150mV (aux), 3.5mV (phono) •Power
requirements: 120/240VAC, 50/50Hz •Dimensions:
3.3" (H) x 12.75" (W) x 8.9" (D)
Order #
555-3188
Model #
PA205
(1-3)
$105.00
(4-up)
$97.95
NEW!
Compact versatile public address amplifiers accept two microphones and one AUX/phono input and
will drive 4/8/16ohm loads or 70V distributed systems. Features: •Individual level controls for each mic and the phono/
AUX input •Rear panel phono/aux selector for line level or magnetic phono level sources •Master level control •Single
tone control (PT110) •Independent bass, treble and midrange controls (PT210) •12 segment LED bargraph output display
•Detachable IEC type power cord •Unswitched convenience AC outlet •Conventional AC power orperation, or 12VDC,
via the included cigarette lighter cord (PT110) •Mix bus for daisy chaining multiple amplifiers •1⁄4" front panel headphone
jack •Push terminal speaker connections •110/220VAC selectable •Includes mobile mounting brackets and hardware
•Dimensions: 3.5" (H) x 12.75" (W) x 9" (D)
Model
PT110
PT210
(ea.)
$173.00
Portable PA Amplifier
✔3 input mixer-amplifier
✔Ceramic/magnetic selectable phono input
✔8ohm and 70V use
✔110VAC/120VDC operation
Portable PA Mixer/Amplifiers
Order #
555-9985
555-9986
4
(1–3)
$77.99
97.99
(4–up)
$74.25
93.25
MCMelectronics.com
Email: quotes@MCMelectronics.com
#555-9985
#555-9986
page
95
4
Solid amplifier
is ideal for
applications in
schools, houses of worship and other smaller sound
distribution environments. Compact unit includes two 1⁄4"
mic inputs, and one 1⁄4" line level AUX input, each with
their own level control. Master bass and treble controls
are provided for sound enhancement. •8Ω, 25V and 70V
outputs •Dimensions: 3.3" (H) x 7.3" (W) x 8.7" (D)
•Mfr. #P40A
Section
Section
4
Professional Audio
Pendant Mount Loudspeakers
PA Mixer Amplifier with
DVD and USB Reader
4
4
4
4
4
Built-in DVD player
Direct reading of MP3 files from USB media
Built-in mixer
8ohm and 70V output
NEW!
Feature packed amplifier is perfect for background music
and entertainment systems in retail, food service, office,
and small tavern environments. Monaural amplifier
provides both low impedance and 70V speaker outputs,
making it suitable for conventional 8ohm speakers, as well
as large scale distributed systems. Besides conventional
movies and video, the built-in DVD player may also be
used to play audio CDs and MP3 files from disk. As if
that is not enough, there is a USB input that will read MP3
and WMA files directly from conventional thumb drives.
Features •Three channel mixer which accepts two MIC
and one AUX inputs (#555-9967 accepts three MIC and
one AUX input) •Front panel bass and treble controls
•Stop, Next, Back, Play/Pause, Program and Repeat
controls on the DVD/CD player •12VDC input for battery
back-up operation •Component, composite and S-video
outputs •L/R stereo line level audio output (DVD only)
•Toslink and coaxial digital audio outputs (DVD only)
•#555-9967 also provides stereo line level mixed output
•4ohm, 8ohm, 16ohm and 70V speaker outputs •Front
panel handles (amplifier is not rack mountable)
•Dimensions: 41⁄2" (H) x 17" (W) x 12" (D), including feet
Order #
555-9965
555-9966
555-9967
Model Max Power Output (1–3)
(4–up)
PD-450A
400W
$155.00 $147.00
PD-750A
700W
195.00 185.00
PD-950A
1000W
239.00 229.00
NEW!
Mixer Amplifier
w/AM/FM Tuner
Full featured amplifier is the ideal center of medium
to large background music and paging systems. 70V
output allows compatibility with large scale distributed
systems, while internal AM/FM tuner adds convenience
for background music, news and other radio media. While
this is a single channel mono amplifier, all line inputs, pre
and record outputs are stereo. Features: •Bright multi
color fluorescent display •50 station presets •Two front
panel 1⁄4" mic inputs •Independent bass and treble controls
•8ohm and 70V speaker compatibility •Heavy-duty screw
terminal speaker connections •Line level CD and AUX
inputs •Fixed line level record output •Preamp output
•Variable line level subwoofer output •110/220VAC
selectable •Shelf top or rack mountable (2RU)
Specifications: •Power output: 200W RMS @ 8ohm,
1000W peak •Dimensions: 3.5" (H) x 19" (W) x 14" (D)
▪Mfr. #PT-720A
Order #
555-9970
(1-3)
$199.00
The ideal choice for high ceiling and open space environments, the Atlas PM
series provides a wide range of hanging speakers for most applications. All
White
models include a suspension cable system and concealment top cover to
provide optimum aesthetics. A hidden terminal block provides connections for multiple 70V
and 100V transformer taps, or direct coupled 8ohm connection. The top cover also facilitates
use of commonly available 3⁄4" ceiling fan hardware. These are perfect for use in retail outlets,
auditoriums, houses of worship and convention center spaces for paging, announcements,
Black
background music and internal communication. PM4FA uses the famed FA134 high performance
4" strategy series® driver. Mounted down-firing in an attractive enclosure, it provides natural sounding, wide coverage
for low height installations, with full frequency response. PM8GD uses the economical GD87 8" coaxial driver to provide
good response and high-efficiency while retaining economy when high-density speaker counts are required. PM8FA
system employs the popular FA138 8" loudspeaker in a specifically tuned and ported enclosure to provide upscale
performance with impressive music and page reproduction. PM8CX employs the Atlas 8CXT60 8" coaxial loudspeaker,
with compression tweeter, which provides excellent efficiency exceeding 96dB and a desirable 90° conical coverage
pattern. It is designed specifically for high ceilings. All models are available in black or white, and are sold individually.
See complete specifications on MCMelectronics.com.
Order #
555-10120
555-10121
555-10125
555-10126
555-10130
555-10131
555-10135
555-10136
Model #
PM4AFA-W
PM4AFA-B
PM8GD-W
PM8GD-B
PM8FA-W
PM8FA-B
PM8CX-W
PM8CX-B
Color White
Black
White
Black
White
Black
White
Black
Power Capacity
Transformer Taps
Frequency Response
25W
1W, 2W, 4W, 16W
75Hz~20KHz
25W
1W, 2W, 4W, 16W
75Hz~20KHz
15W
1W, 2W, 4W, 8W
55hz~15KHz
15W
1W, 2W, 4W, 8W
55hz~15KHz
70W 1.9W, 3.8W, 7.5W, 15W, 30W, 60W 55Hz~20KHz
70W 1.9W, 3.8W, 7.5W, 15W, 30W, 60W 55Hz~20KHz
150W
7.5W, 15W, 30W, 60W
48Hz~20KHz
150W
7.5W, 15W, 30W, 60W
48Hz~20KHz
Ideal for background music
and paging applications in
large scale commercial and
office environments, this
high-quality two-way
speaker even provides
performance suitable
foreground music use.
Ceiling tile design allows
fast and easy installation.
Just make one simple cut to the ceiling tile and drop
into place. Features: •8" treated cone woofer with
foam surround •3⁄4" silk dome tweeter •One piece assembly
for perfect integration into 2' x 4' and 2' x 2' tile ceilings
•1' x 2' finely perforated grill covers entire speaker
front •Integral tile support rail •Fully enclosed, industrial
grade steel construction, suitable for plenum use •Integral
electrical box with cover •Seismic attachment point
•70V/100V transformer with 8ohm bypass position
Specifications: •Frequency response: 55Hz~20KHz •SPL:
92dB (W/M) •Magnet weight: 10 oz. •Transformer taps:
0.9W, 1.9W, 3.8W, 7.5W and 15W •Dimensions: 43⁄4" (H)
x 127⁄8" (W) x 233⁄4" (D) •Sold individually
Order #
555-9120
MSRP
$119.00
(1–3)
$69.99
(4–11)
$59.95
(12–up)
$54.95
Speaker Outside
Order #
Mfr. #
Size Diameter
555-6615 51-4
4"
73⁄8"
555-6616 51-8
8"
123⁄4"
page
96
(1–3)
$6.49
7.99
(4–up)
$6.99
ORBIT Series Pendant Hanging Speakers
The ideal choice for high ceiling and open space
environments, the OPS1 features NEAR’s MLS™ and
MDT™ technologies, which improve sound quality and
increase operating reliability. The low distortion speaker
design, featuring NEAR’s spiderless driver and one-piece
metal-alloy cone structure, delivers superb articulation
and the highest intelligibility for both music and speech.
Features: •Extremely good off–axis response •Computer
matched venting system for full bass output •High power
handling capability for foreground sound •Selectable
power taps via front mounted control •16ohm transformer
bypass •Detachable connector with loop through for easy
daisy chaining of multiple speakers •Includes three
suspension cables with attached forged eyebolts
•Threaded brass insert point for optional safety
cable eye bolt •Fire rated ABS enclosure •Available
in white or black textured finish, either easily painted
to match theme decors Specifications: •Frequency
response: 60Hz~19KHz •Woofer: 61⁄2" •Tweeter: 3⁄4"
polycarbonate dome •Power capacity: 100W (16ohm)
•Transformer taps: 1W (70V only), 2W, 4W, 8W,
16W and 32W •Sensitivity: 89.5dB (W/M) •Overall
dimensions: 15" (dia.) x 91⁄4" (D) •Sold individually
Order #
555-7970
555-7971
555-7972
Drop Ceiling Speaker/Baffle Combination
Economical speaker baffles are
the long time favorite for
commercial and home ceiling
speaker installation. Perforated
steel construction features white textured epoxy finish.
Sizes available for 4" and 8" speakers. 4" version
includes welded mounting studs. Sold individually.
ONLY
$105.00
105.00
135.00
135.00
180.00
180.00
265.00
265.00
Two–Way
Drop–Ceiling Speaker
(4-up)
$189.00
Ceiling Speaker Baffles
NEW!
Mfr. #
OPS1W
OPS1B
CK10
Description
White speaker
Black speaker
10' cable support
ONLY
$179.00
179.00
10.99
MCM has taken the most popular ceiling speaker features,
and put them together in a single, pre-assembled package,
thus saving the installation time and money. Increased
magnet size and power capacity, combined with six
transformer taps from 1⁄3W to 10W, enables one package to
work in a wide variety of applications. Features: •8" dual
cone full range speaker •10 oz. magnet •8ohm impedance
(with transformer bypassed) •White ceiling baffle •T-bar
support Specifications: •Power capacity: 10W/20W RMS/
program •Frequency response: 50Hz~16.5KHz •Voice coil
diameter: 1" •Sensitivity: 86dB (W/M) •Transformer taps:
0.325W, 0.625W, 1.25W, 2.5W, 5W and 10W
•Preassembled for fast
installation •Premounted
70.7V, 10W line
transformer •Voice coil:
1" •8ohm •10W (15W peak) •3" depth •10 oz. ceramic
magnet •Recessed plastic ceiling diffuser baffle
Order #
555-9018
Order #
55-250
MSRP
$49.95
1-800-543-4330
Fax: 1-800-765-6960
(1-3)
$29.99
(4-up)
$26.50
8" Public
Address
Speaker System
NET 30
Terms
Customer Service: 1-877-626-3532
(1-3)
$17.99
(4-up)
$16.95
Professional Audio
8" Public Address Speakers
MCM Custom Audio provides a wide range of ceiling speakers to suit most commercial paging and background music
requirements. Their standard 8" size and good frequency response also makes them ideal full range replacement drivers
in low cost speaker enclosures. #555-6381 feature moderate power capacity and are ideal for most background and paging
situations. High efficiency, high reliability and low cost make these the contractors choice, especially in systems requiring
large numbers of speakers. When wider frequency response is important, #555-6386 feature two-way design, providing
highs up to 20KHz. For more demanding foreground music applications, #555-6390/6391 feature a large 17 oz. magnet
and treated cloth surround, providing 60W peak power capacity and increased bass response. All models are available as
standard 8ohm or with a pre mounted 70V/25V transformer. Each is compatible with standard ceiling baffles (#50-150),
T-bar supports (#555-9021) and surface mount wall baffles (#555-915).
8" Dual Cone Speaker
•Power capacity: 10W/20W
RMS/peak •Frequency
response: 50Hz~20KHz •Magnet
weight: 10 oz. •Tweeter size: 2"
•Voice coil diameter: 1" •Sensitivity:
86dB •Transformer taps: 0.63W, 1.25W,
5W and 10W •Transformer
Order #
555-6386
MSRP
$31.58
(1-3)
$18.99
(4-9)
$16.95
(10-up)
$13.89
Order # Transformer MSRP (1-3) (4-9) (10-up)
555-6381 Yes
$24.65 $15.99 $14.79 $13.99
Ceiling and Wall Grill for
8" Speakers
(1-9)
$6.99
Order #
555-9021
MSRP
$12.95
(1-3)
$8.99
(4-up)
$7.95
Deluxe Woodgrain
Wall Baffle
Order #
555-915
(1-3)
$12.99
(4-up)
$11.99
Ceiling Tile Speaker
This speaker/baffle
combination is designed
to install quickly and
easily in standard drop
ceilings. It will drop
directly into standard 2' x
2' ceiling grids, plus a 2'
crossbar rail is included
for installation in 2' x 4'
grids. Smooth–vent façade blends seamlessly with any
commercial drop ceiling environment. Features: •8" poly
cone woofer with rubber surround •3⁄4" mylar dome tweeter
•8ohm/25V/70V compatibility •Rotary transformer tap
selector •Easy push terminal connection Specifications:
•Power capacity: 30W/60W RMS/peak •Frequency
response: 50Hz~20KHz •Sensitivity: 90dB (W/M)
•Transformer settings: 1.25W, 2.5W, 5W, 10W, 20W
and 8ohm •Dimensions: 233⁄4" x 233⁄4" x 6" •Weight:
7.1lbs. •Mfr. #SP-CT8/T •Sold individually
Order #
555-5615
Protective steel enclosure for
8" speakers with mounting
ring attached. Ring: 121⁄4"
(dia.) Enclosure: 95⁄8" (dia.) x
4" (D). Weight: 2 lbs. Mfr. #RE84.
Order #
55-500A
ONLY
$12.99
Back Box Enclosure
for 8" Speakers
Sloped front wall
for 8" speaker.
(1–3)
$87.99
(4–up)
$82.95
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Use with ceiling grills and wall
baffles to protect and enhance the performance of most
8" installed speakers. One piece CRS construction is
undercoated and patch–jute lined, and finished in black
epoxy. Each includes four 1⁄2"~3⁄4" knockouts, four “J” clips
and one flexible perforated mounting strap. Conical shape
allows easy transportation and storage of large quantities
of units. Dimensions: 41⁄2" (H) x 93⁄4" (dia.). Outer flange
diameter: 113⁄4". Mfr. #CS95-8.
Order #
555-6622
ONLY
$6.59
Deep Recess
Back Box for
8" Speakers
Use with ceiling grills and wall
baffles to protect and enhance the
performance of most 8" installed
speakers. Heavy gauge CRS
enclosures are undercoated and lined with 11⁄2"
thick high–density fiberglass. Deep design provides
0.449ft3 internal volume for enhanced low frequency
performance. Dimensions: 7" (H) x 117⁄8" (dia.).
Mfr. #95-8-7.
Order #
555-6621
(1–3)
$29.99
Order # Transformer MSRP (1-3) (4-9) (10-up)
555-6390 No
$31.58 $18.99 $16.95 $13.89
555-6391 Yes
44.92 26.99 24.95 22.95
Perfect for background music and paging in office
facilities, waiting rooms, restaurants and other public
areas. Specifications: •Power capacity: 10W/15W RMS/
peak •Frequency response: 50Hz~16.5KHz •Impedance
8ohm •Magnet: 10 oz. ceramic •Voice coil: 1"
•Transformer taps: 0.63W, 1.25W, 2.5W, 5W and 10W
8" Speaker Enclosure
Order #
80-1340
•Power capacity:
30W/60W RMS/peak
•Frequency response:
40Hz~20KHz •Magnet weight:
17.7 oz. •Treated cloth surround
•Tweeter size: 2" •Voice coil
diameter: 1.25" •Sensitivity:
88dB •Optional transformer: 30W
•Transformer taps: 10W, 15W, 20W and 30W
•Note: #555-6391 includes a large backplate mounted
transformer which requires additional mounting space.
Overall depth: 53⁄8"
✔Efficient 8" dual
cone design
✔Open back design
✔Built-in volume control
✔For use with 70V systems
(10-24)
$6.29
Drop Ceiling Support for Ceiling Speakers
Ceiling support is designed specifically for use with
commercial paging and background music speakers when
installed in drop ceilings. It places the weight load on the
T-bar ceiling grid, instead of the ceiling tile, preventing
tiles from sagging over time. It is compatible with
virtually all 8" diameter full range and coaxial
speakers when used with the MCM #50-150
or similar ceiling baffles. •Overall dimensions:
231⁄4" x 141⁄2" •Sold individually
8" Heavy-Duty
Two–Way Speaker
Ceiling
Speaker
•Hardware included •White
Order #
50-150
4
(1-3)
$29.99
(4-9)
$27.95
(10-up)
$24.95
Compact On-Wall
Speaker System
Single piece speaker
is perfect for general
purpose paging and
background use. Smooth
half-moon shape provides
attractive, low profile
appearance. Open back
enclosure simply hangs on
the wall surface, much like
a picture. No holes in the
wall are needed other than
to route the speaker wire.
Lightweight construction enable unit to be supported by
commonly available drywall anchors. Features: •Micro
perforated cloth backed metal grill •Dual cone speaker for
enhanced high frequency response •70V transformer for
use with distributed systems •Speaker is easily bypassed
for conventional 8ohm use •Screw terminal strip accepts
up to 16AWG wire Specifications: •Power capacity:
10W/20W RMS/peak •Frequency response: 80Hz~20KHz
•SPL: 88dB (W/M) •Transformer taps: 1.5W, 3W, 6W
•Dimensions: 11" (H) x 81⁄8" (W) x 31⁄2"
•Sold individually
Order #
555-8575
MSRP
$29.95
(1-3)
$17.99
(4-9)
$15.00
(10-up)
$13.50
(4–up)
$24.95
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
97
4
•Power capacity:
10W/20W RMS/peak
•Frequency response:
50Hz~16.5KHz
•Magnet weight: 10 oz.
•Voice coil diameter: 1"
•Sensitivity: 86dB •Optional
transformer: 10W •Transformer
taps: 0.63W, 1.25W, 5W and 10W
8" Two-Way Speakers
Section
Section
4
Professional Audio
4
Drop-Ceiling
Speaker Pair
Ideal for large scale
commercial and office
environments, this fullrange range speaker allows
for fast and easy installation. Completely replaces one tile
section in standard 2' x 2' tile ceilings, or make one simple
cut to install into 2' x 4' tile ceilings. Features: •8" dual
cone driver •2' x 2' finely perforated grill covers entire
speaker front •Included tile support rail •Fully enclosed,
industrial grade steel construction •Recessed connection
point with included wire nuts, removable cover and
conduit knockout •Seismic attachment points •70V/25V,
4W transformer with rotary selector Specifications:
•Frequency response: 95Hz~20KHz •SPL: 94dB (W/M)
•Magnet weight: 10 oz. •Transformer taps: 0.25W, 0.5W,
1W, 2W and 4W •Dimensions: 5" (H) x 2313⁄16" (W) x
2313⁄16" (D) •Mfr. #CSD2X2 •Sold in pairs
Order #
555-7982
ONLY
$120.00
MA Series Ceiling Speaker
Completely enclosed ceiling speaker is the ideal all–purpose solution, covering a wide
variety of distributed commercial and residential sound applications. Internal 25V/70V
transformer taps are easily selected via the front baffle, allowing final volume balancing
to be done after installation. 8ohm position is provided for residential applications.
Rear back box provides protection to the speaker plus consistent sound, regardless
of location. Polypropylene cone woofers and ported enclosures provide extended
frequency response typical of much higher cost units. Features: •Rubber surround
woofers •1" mylar dome tweeter •Fire retardant ABS rear enclosure •White ABS
frame with rotating mounting clips •Easily installs to existing wallboard •Transformer
taps: 0.25W, 0.5W, 1W, 2.5W, 5W, 7.5W, 15W, 30W, 40W (#50-7536 only)
•Sold individually
Woofer Power Capacity Order #
Size
RMS/Peak
50-7535
51⁄4"
30W/60W
50-7536
61⁄2"
40W/80W
Frequency Response
57Hz~20KHz
34Hz~20KHz
SPL Overall Frame Cutout
(W/M)
Diameter
Hole
87dB
9.9"
8.2"
88dB
11.42"
9.74"
(1–3)
$48.99
58.99
(4–11)
$42.95
49.95
Nexus Contractor™ Series Ceiling Speaker Pairs
This line offers premium speaker components and a heavy–duty metal back can. The rear
enclosure provides protection to the rear of the speaker from dust and debris in the ceiling, and
combines with a front baffle port to provide enhanced low frequency response. Features: •Poly
coated woofer with rubber surround •PEI dome tweeter •8ohm/70V compatibility •Transformer
tap selector is hidden behind the grill, but accessible from the front after installation •Detachable
screw terminal strips •Included drop ceiling tile support brackets •Metal safety loop for support cable
•Detailed information may be found at MCMelectronics.com •Sold in pairs
Woofer
Order # Mfr. #
Size
555-5600 SP-4NXT/C
4"
555-5601 SP-5NXT/C
51⁄4"
Power Capacity Frequency Overall Required
RMS/Peak
Response Diameter Cutout
10W/30W
60Hz~20KHz
8"
7"
60W/120W
50Hz~20KHz
93⁄4"
81⁄2"
Depth
81⁄2"
81⁄8"
(1-3 prs.) (4 prs.-up)
$135.00
$125.00
149.00
139.00
Drop–Ceiling Speaker Pair
Ideal for large scale commercial
and office environments, these
full–range range speakers allow
fast and easy installation. Just
make one simple cut to the
ceiling tile and drop into place.
Features: •8" dual cone driver
•One piece assembly for perfect integration into 2' x 4'
and 2' x 2' tile ceilings •1' x 2' finely perforated grill
covers entire speaker front •Integral tile support rail
•Fully enclosed, industrial grade steel construction
•Integral electrical box with wire nuts and cover
•Seismic attachment point •Plenum rated, meets
UL 2043 requirements •70V/25V, 5W transformer with
rotary selector Specifications: •Frequency response:
110Hz~20KHz •SPL: 94dB (W/M) •Magnet weight:
10 oz. •Transformer taps: 0.25W, 0.5W, 1W, 2W and
5W •Dimensions: 43⁄4" (H) x 127⁄8" (W) x 233⁄4" (D)
•Mfr. #CSD1X2 •Sold in pairs
Order #
555-7983
ONLY
$84.99
61⁄2" Two
Way Ceiling
Speaker
This speaker system
features a 61⁄2" coaxial
driver and ported
bass reflex design for
extended frequency
response. The special
diffuser lens and 180W
continuous power
capacity make this ideal
for applications requiring premium sound quality and
smooth off-axis coverage. Features: •61⁄2" cone driver and
dome tweeter •Convenient power tap selector on the front
baffle •Integral metal back can and metal safety cable
•Convenient three-point mounting and detachable terminal
strip for fast installation Specifications: •Frequency
response: 60Hz~20KHz •Dispersion angle: 120°
•Sensitivity: 91dB (W/M) •Continuous power handling:
180W RMS (8ohm), 60W (transformer) •Transformer taps
(70V): 60W, 30W, 15W, 7.5W, 1.5W •Five year warranty
Order # Mfr. #
555-8295 F-2852C
555-8315 HY-TB1
page
98
Description
Ceiling speaker
Ceiling tile support rails
ONLY
$119.00
10.99
(12–up)
$39.95
46.95
5" Two Way
Ceiling
Speaker
61⁄2" Ceiling/In-Wall Speaker System
4Efficient 61⁄2" dual cone design
48ohm or 70V compatible
4Suitable for ceiling or wall mount
4Open back design
Perfect for background music and paging in office
facilities, waiting rooms, restaurants and similar
environments, this square frame speaker is suitable for
in-wall and ceiling use. Full-range, dual cone speaker is
8ohm and includes a 70V transformer for multi-speaker
installations. White ABS frame includes perforated steel
grill and rotating mounting clips, which allow direct
attachment to existing drywall or ceiling board, without
the need for additional hardware. Specifications: •Power
capacity: 30W •Frequency response: 90Hz~18KHz
•Sensitivity: 89dB •Impedance: 8ohm •Transformer taps:
5W, 10W, 20W and 30W Dimensions: •Overall frame
dimensions: 8.67" x 8.67" •Required cutout: 7.25" x 7.25"
•Mounting depth: 3.25" •Sold individually
Order #
555-8570
MSRP
$29.92
(1-3)
$17.99
(4-9)
$15.29
This speaker system
features a 5" coaxial
driver and ported bass
reflex design for
extended frequency
response. The special
diffuser lens and
120W continuous power
capacity make this ideal
for applications requiring premium sound quality and
smooth off-axis coverage. Features: •5" cone driver and
dome tweeter •Convenient power tap selector on the front
baffle •Integral metal back can and metal safety cable
•Convenient three-point mounting and detachable terminal
strip for fast installation Specifications: •Frequency
response: 70Hz~20KHz •Dispersion angle: 170°
•Sensitivity: 90dB (W/M) •Continuous power handling:
120W RMS (8ohm), 30W (transformer) •Transformer taps
(70V): 30W, 15W, 5W, 1.5W, 0.5W •Five year warranty
Order #
555-8290
555-8315
555-8311
555-8312
Mfr. #
F-2352C
HY-TB1
HY-TR1
HY-BC1
Description
Ceiling speaker
Ceiling tile support rails
Trim ring
Surface mount back-can
ONLY
$89.99
10.99
10.99
19.99
(10-up)
$12.69
Surface Mount Wall/Ceiling Speaker
Attractive rectangular speakers may be attached to walls
or ceilings, and internally positioned to direct sound to cover
a specific area. Minimum reflection design significantly
reduces sound wave reflections and the resulting coloration that
occurs with conventional bracket-mounted box type speakers.
Enclosure mounts to conventional gang boxes, and may be internally
rotated to aim the loudspeaker without altering external appearance.
Features: •Two–way sealed enclosure •Paintable white finish •3" x 2" cone woofer •1" dome tweeter •Passive crossover
with optimized filter slope •Overload protection circuitry •Paintable grill •Removable terminal block with loop–through
•Included mounting hardware Specifications: •Frequency response: 120Hz~20KHz •Coverage angle: 120° (H) x 100°
(V) •Sensitivity: 85dB (W/M) •Continuous power capacity: 90W •Impedance: 4ohm, 16ohm selectable •Transformer taps
(70V): 1.5W, 3W, 6W, 12W •Five year warranty •Mfr. #H-1 •Sold individually
Order #
555-8270
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$99.99
NET 30
Terms
Customer Service: 1-877-626-3532
Professional Audio
#555-6801
#555-6802
#555-6803
#555-6804
#555-6805
#555-6806
Speaker Line Matching Transformers
Power
Primary
Order #
Capacity
Volts
555-6801
4 watts
70.7
555-6802
8 watts
70.7
555-6803
16 watts
70.7
555-6804
32 watts
70.7
555-6805
60 watts
70.7
555-6806
4 watts
25.0, 70.7
Primary
Taps
0.5W, 1W, 2W, 4W 1W, 2W, 4W, 8W
4W, 8W, 16W
8W, 16W, 32W
2.5W, 5W, 10W, 20W, 40W, 60W
0.25W, 0.5W, 1W, 2W, 4W
100 Watt Speaker
Matching Transformer
Single coil autoformer allows
high power matching of
8ohm or 16ohm speakers
to 70V or 100V distributed
commercial systems. It may also be used to convert 8ohm
speakers to 16ohm, allowing larger numbers of speakers
to be used in a conventional 8ohm installation. Wide
frequency response makes this ideal in situations where
sonic quality is critical. Color-coded 22AWG connections
are 12" in length. Specifications: •Power capacity: 100W
RMS •Frequency response: 35Hz~19KHz (±1dB) •Taps
(ohms): 8, 16, 50, 100, 200, 400, 800, 1600, 3200 •Taps
(70V): 100W, 50W, 25W, 12.5W, 6.25W, 3.13W, 1.56W
•Taps (100V): 100W, 50W, 25W, 12.5W, 6.25W, 3.13W
•Dimensions: 2.80" (H) x 2.31" (W) x 1.15" (D)
•Weight: 1.7 lbs.
Order #
555-7127
(1-3)
$31.99
(4-9)
$29.95
(10-up)
$27.95
Peel and stick
design greatly
reduces installation time
required when adding this
transformer to typical 8ohm
speakers. Attached mounting
bracket features an adhesive pad that quickly and
securely attaches to speaker magnet, eliminating the need
for additional hardware. Once attached, the pigtail leads
easily attach, allowing standard speakers to be used with
commercial 70V systems. Transformer handles 20W
RMS, and has primary taps for 5W, 10W, 15W and
20W. Secondary connections accommodate 4ohm
or 8ohm speakers.
(1-3)
$18.99
Frequency
Response
60Hz~12KHz ±1dB
50Hz~15KHz ±1dB
40Hz~15KHz ±1dB
30Hz~15KHz ±1dB
60Hz~20KHz ±1dB
Insertion
Loss
ONLY
1.0dB $10.99
0.6dB
19.99
0.6dB
31.99
0.6dB
44.99
0.5dB
31.99
8Ω
100Hz~10KHz ±1.5dB
1.5dB
7.99
Speaker Line
Matching Transformers
Line transformers adapt
conventional 8ohm speakers
for use with multi speaker commercial
systems. High efficiency design
provides insertion loss of less than
0.6dB, with frequency range of
50Hz~15KHz. A single unit is
compatible with both 70.7V and
25V systems, for greater flexibility, and models are
available with 10W and 30W RMS capacity. Secondary
impedance is 8ohm. Primary taps: •10W model: 0.63W,
1.25W, 2.5W, 5W and 10W •30W model: 5W, 10W, 15W,
20W and 30W
Order #
Capacity
555-7120 10W RMS
555-7125 30W RMS
(1-9)
$4.69
13.99
(10-24)
$4.09
11.59
(4-9)
$17.95
Adapts conventional
8ohm speaker for use with
commercial 70V distributed
systems. High efficiency
design provides very
low insertion loss and
frequency response of
50Hz~15KHz. Small 2W
size is ideal when power requirements are low and
space is limited. •Primary taps: 1W, 2W •Output: 8ohm
•Dimensions: 1" (H) x 11⁄4" (W) x 1" (D) •Mounting
holes: 11⁄2" centers
Order #
555-7117
(10-up)
$15.19
70.7 Volt Line
Output Transformer
These heavy-duty high
power line matching
transformers adapt 4ohm
or 8ohm speaker outputs
from conventional audio
equipment, to 70.7V for
use with public address speaker systems. •Frequency
response: 40Hz~20KHz Primary taps: •4ohm •8ohm
•Secondary tap: •70.7V
Power Capacity Dimensions
Order #
(RMS)
(H) x (W) x (D) (1-2)
(3-up)
555-6451 100W
31⁄8" x 33⁄4" x 31⁄4" $47.99 $42.95
Follow us on:
Product Questions Email: tech@MCMelectronics.com
(1-9)
$3.29
(10-24)
$2.85
Ceiling
Speaker/
Baffle Combination
Complete ceiling speaker
system includes an 8" dual cone
speaker, steel ceiling baffle and
line transformer. It is perfect
for general purpose background
music and paging applications in
offices, waiting rooms and other
public areas. The 8" diameter
speaker features a 5 oz. ceramic magnet and 8ohm,
1" voice coil for 15W program power capacity and
50Hz~18KHz response. The attached transformer is
compatible with 25V and 70V constant voltage speaker
systems, and has 1⁄2W, 1W, 2W and 5W taps. The 123⁄4"
diameter grill features a textured white epoxy finish that
compliments any room decor. Units with optional front
mount 50ohm volume control allow quick convenient
local adjustment of sound level.
Order # Mfr. #
555-6580FD72W
555-6581C5AT72
(25-up)
$3.59
10.39
Compact 70 Volt Speaker
Line Transformer
“Peel and Stick” 70 Volt
Line Transformer
Order #
555-2028
Secondary
Taps 8Ω
4Ω, 8Ω
4Ω, 8Ω
4Ω, 8Ω
4Ω, 8Ω, 16Ω
(25-up)
$2.49
4
Description
(1–3) (4–up)
Speaker, transformer, $24.99 $22.50
grill
Speaker and 16.99 transformer only
Heavy-Duty Ceiling
Speaker/Baffle Combination
Designed for higher noise areas which require higher
power capacity, this ceiling speaker system includes
an 8" dual cone speaker, steel ceiling baffle and line
transformer. The 8" diameter speaker features a 10 oz.
ceramic magnet and 8ohm, 1" voice coil for 25W program
power capacity and 50Hz~18KHz response. The attached
transformer is compatible with 25V and 70V constant
voltage speaker systems, and has 1⁄2W, 1W, 2W and 5W
taps. The 123⁄4" diameter grill features textured white
epoxy finish that compliments any room decor. EZ
Mount version is designed for use in standard 2 x
4 ceiling installations where back boxes are not
required. Pre–mounted brackets install quickly
to included support rails with included wing nuts.
Order #
Mfr. #
555-6585 HD72W
555-6596 EZHD72W
555-6587 C10A
Description
Speaker, transformer, grill
Speaker, transformer, grill, EZ Mount brackets
Speaker only
ONLY
$21.99
25.99
10.99
Easy Install™ Ceiling Speaker
Easy Install™ surface-mount speakers provide fast, cost effective drop ceiling installation
in less than one minute. Two specially designed color-coded studs pierce the ceiling tile, and
use custom designed wing nuts to secure the speaker in place. These studs also provide the
electrical connection with standard wire nuts from the top of the tile. Speakers may also be
installed in surfaces such as drywall or wood, up to 1.25" thick, by drilling two small pilot
holes. The enclosure uses a combination of direct and reflective paths, for consistent sound
dispersion. A large O-ring seal at the base provides an airtight seal against the ceiling. Rotary
volume control allows easy local adjustment after installation. Both are designed for use with
70V constant voltage amplifier outputs. Includes a rotary selector for 0.25W, 0.5W, 1.0W,
2.0W and 4W. Specifications: •Frequency response: 125Hz~15KHz •SPL: 90dB •Minimum
dispersion: 120˚ •Base diameter: 8.75" •Overall diameter: 9.5" •Height: 3" •Color: White
Order #
555-6416
ONLY
$36.99
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
99
4
Line transformers adapt conventional 8ohm speakers for use with multi speaker commercial
systems. This wide range of models, from Atlas Sound, meet today’s high performance quality
standards in a variety of applications. All models include 6" color–coded leads for primary and secondary
connections, except #555-6805, which has solder lugs.
Section
Section
4
Professional Audio
Wall Volume Controls for 70V Systems
4
In-Wall 70 Volt
Volume Controls
11-position rotary monaural
control provides local volume
adjustment in multi speaker
applications, where speakers
utilize 70V line transformers.
Single gang stainless steel plate
is natural steel color, labeled 0~10
with black numerals, and includes
a black ABS knob, with white
pointer. Features: •Terminal
strip accepts up to 14AWG wire
•Mounts in a single gang box or
low voltage bracket •Variety of power capacities suit a
wide range if installations Specifications: •Frequency
response: 35Hz~20KHz •Attenuation: -34~0dB, in ten
steps •Full counterclockwise position is off
Power Capacity
Order #
(RMS)
MSRP
555-138
10W $23.00
555-140
35W
25.00
555-144
100W
30.00
(1-3)
(4-9) (10-up)
$17.99 $16.25 $15.25
19.99 17.95 16.95
24.99 22.50 21.25
These transformer based volume controls provide zone or individual
speaker volume control in 70V distributed audio systems. Stainless
steel wall plate with silk screen dial scale and black knob with white inlay pointer,
matches conventional commercial installation style. Precision wound, laminated core
transformers are vacuum varnished, for silent, efficient operation. Detachable phoenix
style connector allows easy pre–wiring and installation. All models will fit in a
standard single gang electrical box (not included), and are UL listed.
Order #
Model #
555-7340 AT10
555-7341 AT35
555-7342 AT100
Power
Rating Attenuation/Step
10W
3dB
35W
3dB
100W
3dB
Total
Attenuation
33dB
27dB
27dB
(1–3)
$19.99
23.99
29.99
(4–up)
$18.95
21.50
27.89
SC Series Paging Horns
These fully weather resistant horns provide intelligible voice paging and tone signaling
for indoor and outdoor sound system applications. Corrosion resistant stainless steel
mounting hardware is included for easy mounting in wall, pole or ceiling applications.
The SC Series models are also designed for intercom talk back applications requiring dual
operation as both a microphone and speaker. Each model is a double re-entrant horn with
compression driver for high sensitivity and a lightweight aluminum enclosure. The loudspeaker diaphragm is heat and moisture-resistant to prevent deformation and extend operation.
Models are available in 8ohm (16ohm for SC-650), or 25V/70V versions with screwdriver adjustable taps. Five year
limited warranty.
Order #
555-8370
555-8371
555-8375
555-8376
555-8380
555-8381
555-8385
Mfr. #
SC-610
SC-610T
SC-615
SC-615T
SC-630
SC-630T
SC-650
Power Capacity
10W
10W
15W
15W
30W
30W
50W
Frequency Response
315Hz~12.5KHz
315Hz~12.5KHz 280Hz~12.5KHz
280Hz~12.5KHz
250Hz~10KHz
250Hz~10KHz
250Hz~6KHz
Description
8ohm
70V, 2.5W, 5.0W, 10W
8ohm
70V, 3.8W, 7.5W, 15W
8ohm
70V, 7.5W, 15W, 30W
16ohm
6" Aluminum
Weatherproof
PA Horn
Indoor/Outdoor Music/Paging Speaker
Compact two-way bass reflex speaker system is suitable
for indoor or outdoor music and voice paging distribution,
meeting IEC IP-X4 rating. Features: •4.72" cone woofer
•1" cone tweeter •Durable ABS resin, UV resistant
paintable enclosure and steel grill •Horizontal or vertical
mounting with rotatable logo badge •Included mounting
bracket Specifications: •Continuous power capacity: 90W
•Frequency response: 80Hz~20KHz •Sensitivity 90dB
(W/M) •Impedance: 8ohm (transformer bypassed)
•70V transformer taps: 5W, 10W, 15W, 20W, 30W
•Dimensions: 11.42" (H) x 7.72" (W) x 5.91" (D)
•Five year warranty •Sold individually
Order #
555-8320
555-8321
Model #
BS-1030B
BS-1030W
Color
Black
White
ONLY
$120.00
105.00
ONLY
$35.99
43.99
46.49
59.49
61.99
70.99
120.15
Weatherproof
8" Aluminum
PA Horn
Ideal for paging and
general public address
situations, including
automotive applications.
Aluminum horn assembly
and weatherproof
construction ensure
long term reliability. Rubber trim ring provides added
protection and enhanced appearance. Includes heavy-duty
“U” mounting bracket. Specifications: •Power capacity:
15W/30W RMS/peak •Frequency response: 350Hz~7KHz
•Dimensions: 6" (dia.) x 6" (L) •Impedance: 8ohm •Color:
Gray •Call for larger quantity pricing
Ideal for commercial
paging and general
public address
applications indoor or
outdoors, this rugged aluminum horn features increased
power capacity and a fully adjustable mounting base.
Roatary switch provide access to available 70V and
25V taps, and a bypass switch allows 8ohm use.
Specifications: •Power capacity: 32W/60W RMS/peak
•Frequency response: 350Hz~14KHz •Dimensions: 8"
(dia.) x 10" (D) •70V taps: 2W, 4W, 8W, 16W and 32W
•25V taps: 2W, 4W, 7.5W and 15W
Order #
555-6567
Order #
555-6575
(1–3)
$17.99
(4–9)
$14.89
(10-up)
$11.49
(1-3)
$52.99
Weatherproof
61⁄2" x 11" PA Horn
(4-9)
$50.95
(10-up)
$46.95
Weather Proof
25/70V PA Horn
Ideal for commercial paging
and general public address
applications in indoor or
outdoor situations. Large
ABS rectangular horn
includes all mounting hardware, plus the front mounting
flange for flush wall installation. Rear rotary switch
selects multiple 25V/70V wattage taps, and separate input
leads are provided for 8ohm use, allowing compatibility
with standard and large multi speaker systems.
Specifications: •Power capacity: 30W/50W RMS/peak
•Frequency response: 250Hz~15KHz •Sensitivity 120dB
•Dimensions: 65⁄8" (H) x 11" (W) x 91⁄2" (D) •25V taps: 1W,
2W, 8W and 16W •70V taps: 2W, 4W, 8W, 16W and 32W
•Color: White •Call for larger quantity pricing
Ideal for paging and general
public address situations,
including automotive
applications. Aluminum
horn assembly and
weatherproof construction
ensure long term reliability.
Mounting bracket included.
Specifications: •Power
capacity: 10W/20W RMS/peak •Frequency response:
400Hz~7KHz •Dimensions: 5" (dia.) x 5" (L) •Impedance:
8ohm •Color: Black •Call for larger quantity pricing
Perfect for signaling
and paging, this high
efficiency horn features
250Hz~16KHz frequency
response, 30W/60W
nominal/max power
capacity, and
120dB/4V/1M sensitivity. Compatible with 25V or 70V
line input, built-in rotary switch selects the following
transformer taps: •70V: 1W, 3W, 5W, 10W, 15W and 30W
•25V: 0.1W, 0.4W, 0.6W, 1.3W, 1.9W, 3.7W, 10W, 15W
and 30W. Note: Not for 8ohm use. Dimensions: 8" (H) x
11" (W) x 101⁄4" (D).
Order #
555-6565
Order #
555-6566
Order #
555-6305
page
100
(1–3)
$39.99
(4–9)
$34.95
(10-up)
$32.50
5" Aluminum
Weatherproof PA Horn
(1–3)
$9.49
1-800-543-4330
Fax: 1-800-765-6960
(4–9)
$8.69
(10-up)
$6.69
NET 30
Terms
Customer Service: 1-877-626-3532
(1-3)
$59.99
(4-up)
$54.95
CS Series Wide Range Paging Horns
This unique series of paging speakers are ideal for indoor and outdoor commercial sound system
applications including voice paging, background music and tone signaling. Compared to traditional
metal horns, CS Series speakers offer far wider frequency range and superior sound quality. All CS
Series models stocked at MCM are UL listed and each includes a built-in 70.7V/100V transformer with
screwdriver selectable taps. All are fully weather resistant and withstand demanding environmental conditions
with a sealed enclosure, full range moisture resistant cone speaker, stainless-steel mounting hardware and a
protective mesh grill. Polyurethane resin coating resists fading effects of prolonged exposure to ultraviolet
light. All are backed with a five year warranty.
Professional Audio
CS-304U Constant
Directivity Paging
Horn
CS-64U Compact
Paging Speaker
Section
4
CS-154U
Constant
Directivity
Paging Horn
Perfect for music or
voice paging, this compact
speaker provides excellent
sound reproduction when
compared to conventional
paging horns. Features: •4.72"
diameter full range moisture resistant speaker component
•Cable strain relief •Meets UL 1480 (UEAY for outdoor
use) •IEC IP-64 standards compliant for dust and moisture
resistance •Wide temperature range from -4°F~131°F
•Includes stainless steel mounting bracket Specifications:
•Power capacity: 30W RMS •Frequency response:
120Hz~15KHz •Sensitivity: 98dB (W/M) •70V
transformer taps: 30W, 15W, 10W and 5W •Dispersion:
Constant directivity, 100° (H) x 85° (V) •Dimensions:
14.40" (W) x 9.06(H) x 10.71” (D) •Mfr. #CS-304U
Perfect for music or voice
paging, this compact
speaker provides excellent
sound reproduction when
compared to conventional
paging horns. Features: •4.72" diameter full range
moisture resistant speaker component •Cable strain
relief •Meets UL 1480 (UEAY for outdoor use) •IEC
IP-64 standards compliant for dust and moisture resistance
•Wide temperature range from -4°F ~ 131°F •Includes
stainless steel mounting bracket Specifications: •Power
capacity: 15W RMS •Frequency response: 150Hz~15KHz
•Sensitivity: 97dB (W/M) •70V transformer taps: 15W,
7.5W and 2.5W •Dispersion: Constant directivity, 100°
(H) x 85° (V) •Dimensions: 14.40" (W) x
9.06" (H) x 10.71" (D)
Order #
555-8350
Order #
555-8355
Order #
555-8360
ONLY
$53.49
ONLY
$109.56
Compatible with standard 1 ⁄8" x
18 TPI threaded horns, these
universal drivers are ideal for
all sound reinforcement and PA
applications. Available in 50W
and 100W versions, with or
without an integral 70V
transformer, a model is
available to suit most needs.
Non transformer models are
16ohm. Measures 6" (dia.) x 7" (H).
3
Power Capacity
50W
100W
100W
Frequency
Response
280Hz~5KHz
300Hz~6KHz
300Hz~6KHz
35 Watt Universal
Driver w/Built-In
70V Transformer
•Frequency response:
250~6KHz •Power handling:
35W nom./45W max
•Sensitivity: 106db 1W/1M
•Impedance: 8ohm •Throat
diameter: 13⁄8" x 18 TPI
Sensitivity (1-3) (4-up)
110dB $39.99 $34.95
113dB
30.99 28.95
113dB
44.99 39.95
Order #
555-995
(1-3)
$74.99 (4-up)
$69.95
Ideal for commercial paging
and general public address
applications in indoor or
outdoor situations, these
rugged aluminum horn assemblies
include heavy-duty mounting brackets
and front rubber gaskets. Multiple screw
connections provide access to available
70V taps, and separate input leads are provided for 8ohm
use, allowing compatibility with standard and large multi
speaker systems. Both models are dark gray color.
Specifications #555-6570: •Power capacity: 15W/30W
RMS/peak •Frequency response: 250Hz~15KHz
•Dimensions: 81⁄4" (dia.) x 11" (D) •70V taps: 5W, 7.5W,
10W and 15W #555-6571: •Power capacity: 25W/50W
RMS/peak •Frequency response: 220Hz~15KHz
•Dimensions: 12" (dia.) x 14" (D) •70V taps: 10W,
15W, 20W and 25W •Call for larger quantity pricing
Order # 555-6570
555-6571
20" Aluminum
Weatherproof
Projection Horn
15" x 9" Aluminum
Weatherproof
Projection Horn
Used with universal horn
drivers. Specifications:
•Diameter: 20" •Depth:
20.25" •Dispersion: 80°
•Low end cutoff: 250Hz
Order #
555-1015
(4-up)
$52.95
Order #
555-1020
(1-3)
$48.99 Weatherproof Horn
8" x 5" Paging Horn
Weatherproof horn complete
with all purpose mounting
bracket. Impedance selector
for 25V or 70V line, 15W.
Dimensions: 9" (dia) x
91⁄4" (D). Weight: 4.5 lbs.
Mfr. #SPT15A.
•Low profile design for easy
installation in tight areas
•Weather-resistant •Swivel
type mounting bracket
•300Hz~5KHz response
•30W power handling
•8ohm
Order #
80-1335
ONLY
$87.99
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Order #
55-240
(1-3) $15.99 Size
8"
12"
(1-3)
$36.99
53.99
(4-9)
$33.95
49.95
(10-up)
$27.95
42.50
Weather
Resistant
PA Horns
Used with universal horn
drivers. Specifications:
•Depth: 20.25"
•Dispersion: 120° x 60°
•Low end cutoff: 250Hz
(1-3)
$58.99 ONLY
$106.40
Weatherproof
Aluminum PA Horns
Universal Horn Drivers
Order #
555-8905
555-6426
555-8910
Model #
CS-154U
(4-9)
$14.59
(4-up)
$43.95
(10-up)
$12.19
Weather resistant, double
re-entrant loudspeakers are
available in 15W and 30W
versions for medium and
high–powered sound
distribution. They are perfect in any paging application
in warehouses, outdoor lots, and public facilities.
Screwdriver tap adjustment allows easy selection
of multiple taps on the built–in 25V/70.7V/100V
transformer, allowing compatibility with all multi speaker
and signaling applications. Included bracket allows easy
vertical or horizontal mounting to I-beams and pillars.
Rugged metal housing is finished in baked epoxy gray
finish. Specifications #555-6635: •Power capacity:
15W program •Frequency response: 400Hz~14KHz
•Sensitivity: 106dB (1W/1M) •Dimensions: 83⁄4" (H) x
77⁄8" (W) x 95⁄16" (D) •Transformer taps: 1W, 2W, 3.8W,
7.5W and 15W #555-6636: •Power capacity: 30W
program •Frequency response: 300Hz~12KHz
•Sensitivity: 109dB (1W/1M) •Dimensions: 10" (H) x
10" (W) x 101⁄2" (D) •Transformer taps: 2W, 3.8W,
7.5W, 15W and 30W
Order #
555-6635
555-6636
MCMelectronics.com
Email: quotes@MCMelectronics.com
Mfr. #
AP15T
AP30T
Size
7"
10"
(1–3)
$109.00
99.99
(4–up)
$99.00
-
page
101
4
Perfect for music or voice
paging, this compact
speaker provides excellent sound
reproduction when compared to
conventional paging horns.
Features: •4.72" diameter full
range moisture resistant speaker
component •Cable strain relief •Meets UL 1480 (UEAY
for outdoor use) •IEC IP-64 standards compliant for dust
and moisture resistance •Wide temperature range from
-4°F~131°F •Includes stainless steel mounting bracket
Specifications: •Power capacity: 6W RMS •Frequency
response: 130Hz~13KHz •Sensitivity: 96dB (W/M) •70V
transformer taps: 6W, 3W, 1.5W and 0.5W •Dispersion:
Exponential, 100° x 100° •Dimensions: 8.82" (W) x
9.17" (H) x 8.19" (D) •Mfr. #CS-64U
Section
4
Professional Audio
Dynamic Desktop Microphone
4
Omnidirectional
Desk Microphone
NEW!
Dynamic microphone provides modern
styling and features in a rugged Cycolac
housing for all industrial and commercial
public address and paging applications. Very
smooth frequency response includes a slight
rise above 2KHz for improved speech
intelligibility. Long life DPDT leaf switch
provides choice of push-to-talk (with lock
capability) or lift to talk operation. It is
manufactured to take normal abuse and retain
its performance over a long life. Features:
•Molded non skid feet •Rugged diecast base •Attached 7' cable
•Selectable high or low
impedance operation
Specifications: •Frequency
response: 50Hz~12KHz
•Impedance: 40Kohm (high), 400ohm
(low) •Dimensions: 93⁄8" (H) x 43⁄8" (W) x 57⁄8" (D)
•Attached 4' cable is unterminated, with stripped and
tinned leads •May be wired for NO or NC triggering
•Mfr. #878HL-2
Order #
35-2525
NEW!
ONLY
$79.99
Gooseneck Microphone
with Push–to–Talk
This omnidirectional microphone is the gold
standard for fast food restaurants, drive-in
banks, supermarkets, restaurants, paging and
dispatching stations or any other application
where a fixed mount is required. Extremely
rugged and reliable construction will stand up
under the most strenuous handling conditions.
Smooth wide frequency response, with slight boost
at 2000Hz provides natural, crisp, highly
intelligible sound. Features: •Side mounted, sealed
push–button NO DPST switch •19" gooseneck with
attached mounting flange •Rugged 7' synthetic
jacketed four conductor shielded cable •Chrome
plated screen and black cycolac cap and housing
Specifications: •Frequency response:
50Hz~13KHz •Impedance: 400ohm (compatible with
150~600ohm) •Attached coiled cable is unterminated, with
stripped and tinned leads •Mfr. #AMC-105SNO-19
Order #
35-2535
ONLY
$59.99
NEW!
High quality dynamic gooseneck
microphone is ideal for any podium or PA
system. Features: •Cardioid pick-up pattern
•16" flexible gooseneck stalk, shock mounted to
a die-cast zinc base •Push-to-lock and push-totalk switches •Attached 10' five-conductor
cable with external contact closure outputs
•Excellent speech intelligibility with
low ambient noise and effective
feedback control Specifications:
•Element type: Moving coil dynamic
•Impedance: 500ohm •Frequency response:
100Hz~12KHz •S/N ratio: >65dB •Dimensions:
181⁄4" (H) x 41⁄4" (W) x 61⁄4" (D) •Finish: Matte black
Order #
555-2880
Mfr. #
DDU250
ONLY
$138.00
Desktop Paging Microphone
Rugged desktop microphone is
designed for all commercial public address
and paging applications. Its molded Cycolac®
housing stands up to demanding industrial
environments. Features: •Omnidirectional
pick-up pattern •Locking push–to–talk
or lift–to–talk operation •Attached 7'
four conductor cable •Switchable
hi/lo impedance Specifications:
•Element type: Dynamic
•Impedance: 400ohm/12Kohm
selectable •Frequency response:
50Hz~12KHz •Sensitivity: -72dB •Dimensions:
93⁄8" (H) x 43⁄8" (W) 57⁄8" (D) •Finish: Matte black
Order #
80-1345
Mfr. #
MBS1000
ONLY
$152.00
Dynamic
Hand Held Microphone
Omnidirectional dynamic
microphone is especially
tailored for voice communications,
providing crisp, clear, highly
intelligible sound. Modern
tear–drop styling offers extreme
reliability, convenient handling,
rugged construction and high
performance for years of
dependable service. Polyester
diaphragm resists moisture and
NEW!
temperature extremes, most acids,
alkalis and solvents. Features:
•Permanently attached, heavy-duty, four conductor,
two shielded, coil cord •DPDT long life switch •Low
impedance output •Factory wired NO •May be rewired
in the field for line shorting Specifications: •Frequency
response: 100Hz~7.5KHz •Impedance: 400ohm
(compatible with 150~1Kohm) •Attached coiled cable is
unterminated, with stripped and tinned leads •Mfr. #611L
Order #
35-2530
Surface Mount
Boundary
Microphone
Superior low noise, cardioid condenser microphone has
been specially designed to provide high immunity to radio
interference from GSM based cell phones, PDA/cell
phones with walkie-talkie capability and other similar
devices. It is ideal for use on altars, conference tables,
stage floors, or television productions. Advanced
transformerless design is self-contained to eliminate the
need for mounting any external boxes. Features: •12dB/
octave at 80Hz hi-pass filter •Die-cast zinc base •Double
layer perforated steel screen •Included 30' feet of highquality microphone cable •Mini XLR type connector
Specifications: •Frequency response: 100Hz~20KHz
•Sensitivity: -33dBV (22mV) @ 1Pz •Impedance: 150ohm
•Self noise: 25dBA •Max SPL: 127dB •Operates on 12V,
24V or 48V phantom power •Mfr. #901R
Order #
35-2510
ONLY
$139.00
NEW!
Dynamic Cardioid Microphone
Rugged microphone provides the sound
quality and characteristics demanded by
professional but priced for the budget
conscious installer or musician. Wide
and flat frequency response provides
unsurpassed natural transparent sound
quality. Cardioid pick-up pattern
minimizes annoying feedback and
reduces pick-up of unwanted off–axis
sounds. Features: •Flex–Form™
hardened steel grill screen •Die-cast alloy
housing with rubber textured gunmetal
black finish •High energy neodymium
magnet •Excellent proximity effect •Male
XLR connector •Includes zippered vinyl protective pouch
and a swivel mic mount Specifications: •Frequency
response: 80Hz~12KHz •Impedance: 500ohm
•Mfr. #CTM-33
Order #
35-2520
ONLY
$24.99
Dynamic Communications
Microphones
Durable microphone includes
side PTT button making it
perfect for all communications
and PA applications. Four–pin
screw connector is wired for
compatibility with Cobra and
many other CB radio brands.
Features: •9' coiled High–Flex™
cord •Drop–proof ABS housing
•Metal mesh grill •Chrome
connector •Black color
ONLY
$34.99
Cardioid Condenser Gooseneck Microphone
Miniature electret condenser microphone is permanently
attached to an ultra-slim gooseneck and features controlled
low frequency roll off, smooth mid-range, and slightly
peaked upper range to give a “natural” sound in all
applications requiring voice reproduction. A superior
and uniform unidirectional pattern minimizes feedback,
reverberation, off-axis coloration, background noise
and placement problems. Features: •Extremely durable
satin black finish •17" gooseneck •Supplied miniature
windscreen •Terminated with a 3 pin XLR male connector
Specifications: •Frequency response: 100Hz~16KHz
•Sensitivity: -53dBV •Impedance: 1Kohm •S/N ratio:
>40dB •Max SPL: 131dB •Requires 9~52VDC phantom
power •Mfr. #827A
Order #
35-2500
page
102
ONLY
$79.99
NEW!
Pop Filter
Eliminates vocal “pops”
that can be problematic
in the studio, especially
with large diaphragm
microphones. Includes
attached 15" gooseneck
and stand clamp.
Compatible with all
mic stands and booms.
•Mfr. #EPF15A
Order #
35-2460
1-800-543-4330
Fax: 1-800-765-6960
NEW!
Order #
111-645
111-655
Type
Standard
Noise canceling
ONLY
$19.99
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$10.99
21.99
Cardioid Condenser
Instrument Microphone
Professional Audio
NEW!
Order #
35-2300
ONLY
$69.99
NEW!
Cardioid Condenser
Vocal/Instrument Microphone
Engineered for live vocals, acoustic
instrument, strings, piano as well as cymbals/
overheads, this microphone features point
source transduction, field-effect detection,
transformerless drive and durable metal
screen. Non-reflective polyurethane finish
ensures that you alone are in the spotlight.
Mic clip and protective pouch are included.
Specifications: •Operating principle:
Condenser •Polar pattern: Cardioid
•Frequency response: 55Hz~20KHz
•Sensitivity: -35dBV (18mV) @ 1Pa
•Impedance: 500ohm •Max SPL: 132dB, 1%
THD •Self noise: 22dBA •Power requirements: 48V, 5mA
•Mfr. #C195
Order #
35-2330
ONLY
$99.99
NEW!
Cardioid Dynamic
Vocal/Instrument Microphone
Excellent for vocals, instruments and guitar
cabinets, this cost effective microphone
provides wide frequency response for
accurate, natural sound reproduction.
Cardioid polar pattern offers superior
feedback rejection and flex-form hardened
steel grill attached to an all metal housing
provides durable performance. Includes
mic clip and recessed on/off switch.
Specifications: •Operating principle:
Moving-coil dynamic •Polar pattern:
Cardioid •Frequency response:
80Hz~13KHz •Sensitivity: -56dBV (3.2mV)
@ 1 Pa •Impedance: 500ohm •Mfr. #CAD12
Order #
35-2340
NEW!
The GXL2200 is inspired
cosmetically, mechanically, and
electrically by early generations
of European masters. It provides
superior performance in
applications including studio
vocals, voice–over, choir, acoustic
instrument, strings, piano and
percussion. Features include an
internal hi-pass filter, elastic shock
mount and protective pouch are
included. 48Vphantom power is
required. Specifications: Operating
principle: Externally–biased
condenser •Polar pattern: Cardioid •Frequency response:
30Hz~20KHz •Sensitivity: -36dBV (16mV) @ 1 Pa
•Impedance: 75ohm •Max SPL: 130dB, 1% THD
•Self noise: 20dBA •Power requirements: 48V, 3mA
•Mfr. #GXL2200
Order #
35-2310
Excellent for live vocals, brass, guitar
cabinets, bass cabinets, snare drums, this
microphone compares to industry standards
for tone, gain before feedback and handling
noise rejection. This microphone utilizes an
ultra fine thread of conduction, around high
energy neodymium, bonded to an ultra low
mass diaphragm. The secondary port is
calibrated such that maximum phase
cancellation occurs 125° off axis, while the
primary port is preceded with a multistage,
anti-turbulent blast filter. Non-reflective
polyurethane finish provides low profile, professional
appearance. Mic clip and protective travel pouch are
included. Specifications: •Operating principle: Moving
coil dynamic •Polar pattern: Super cardioid •Frequency
response: 40Hz~18KHz •Sensitivity: -54dBV (2.0mV)
at 1Pa •Impedance: 200ohm •Mfr. #D189
Order #
35-2350
Order #
35-2360
ONLY
$44.99
Cardioid Condenser
Boundary
Microphone
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Order #
35-2400
35-2410
Order #
35-2320
ONLY
$149.99
Four piece drum
microphone pack
includes two TM211
and one each of SN210
and KM212, all in a
protective travel case.
TM211: Built for
NEW!
toms, this moving coil
cardioid dynamic microphone features a built-in rim clip
which eases set-up and adjustment. It is also suitable for
brass, guitar and bass cabinets, snares and rack/floor toms.
SN210: Built for snares, this moving coil cardioid dynamic
microphone features a built-in rim clip which eases set-up
and adjustment. KM212: Designed for demanding kick
drum use, this cardioid dynamic microphone is also ideal
for bass cabinets, kick drums and rack/floor toms. It
includes a specially designed isolated mic stand clip.
All four components come in a protective carry case
•Mfr. #DMTP4
Order #
35-2370
ONLY
$109.00
Complete Seven
Piece Percussion
Microphone Pack
Surface mounted
microphone is ideal
for use on altars,
conference tables, stage floors and television production
studios. Cardioid pick-up pattern minimizes feedback
while reducing pick-up of unwanted off axis sounds. The
advanced transformerless design is fully self–contained,
eliminating the need for external boxes. Improved RF
immunity greatly reduces susceptibility to annoying digital
cell phone interference. Features: •80Hz, 12dB/octave
high pass filter •Zinc die-cast base •double layer perforated
steel mesh screen •Includes 30' mic cable with attached
mini XLR connector •Will operate on 12V, 24V or
48V phantom power •Available in black or white
Specifications: •Frequency response: 100Hz~20KHz
•Sensitivity: -33dBV (22mV) at 1Pa •Impedance: 150ohm
•Self noise: 25dBA •Max SPL: 127dB •Mfr. #ST100
Excellent for live vocals, brass, guitar
cabinets, bass cabinets, this microphone
compares to industry standards for tone,
gain before feedback and handling noise
rejection. Recessed on/off switch, mic
clip and protective travel pouch are
included. Specifications: •Operating
principle: Moving coil dynamic •Polar
pattern: Super cardioid •Frequency
response: 80Hz~13KHz •Sensitivity:
-53dBV (2.3mV) at 1Pa •Impedance:
500ohm •Mfr. #CAD25A
Three piece kit includes
one GXL2200 cardioid
condenser, one
GXL1200 cardioid
condenser and one
EPF15A pop filter, with
shock mount and mic clip. Save $$$ when you buy this
complete studio recording package. •Mfr. #GXL2200SP
ONLY
$89.99
NEW!
Super Cardioid Dynamic
Vocal/Instrument Microphone
GXL Series Studio
Microphone Pack
Four Piece
Percussion
Microphone Pack
Super Cardioid Dynamic
Vocal/Instrument Microphone
NEW!
NEW!
ONLY
$79.99
NEW!
ONLY
$24.99
4
Color
Black
White
ONLY
$89.99
89.99
Complete seven piece
drum microphone
pack includes three
TM211, two CM217,
one SN210, and
NEW!
one KM212, all in a
protective travel case.
TM211: Built for toms, this moving coil cardioid dynamic
microphone features a built-in rim clip which eases set-up
and adjustment. It is also suitable for brass, guitar and bass
cabinets, snares and rack/floor toms. CM217: Designed
for drum overheads, this cardioid condenser microphone
features a high pass filter and attenuator. Mic stand clip
is included. It is also suitable for acoustic instruments,
strings, cymbals/overheads and hi-hats. SN210: Built for
snares, this moving coil cardioid dynamic microphone
features a built-in rim clip which eases set-up and
adjustment. KM212: Designed for demanding kick drum
use, this cardioid dynamic microphone is also ideal for
bass cabinets, kick drums and rack/floor toms. It includes
a specially designed isolated mic stand clip. All seven
components come in a protective carry case
•Mfr. #DMTP7
Order #
35-2380
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$199.99
page
103
4
Point-source transduction, field-effect
detection, and pure high-voltage, this mic is
the perfect balance of performance and value
in studio or stage instrument pick-up. •Capture
your instrumentation with exacting detail
•Proximity effect is inversely proportional to
distance •Mic clip and protective pouch are
included •48V phantom power is required
Specifications: •Operating principle:
Externally biased condenser •Polar pattern:
Cardioid •Frequency response: 30Hz~20KHz •Sensitivity:
-36dBV (16mV) at 1Pa •Impedance: 100ohm •Max SPL:
135dB, 1% THD •Self noise: 17dBA •Power requirements:
48V, 4mA •Mfr. #GXL1200
Large
Diaphragm
Condenser Microphone
Section
Section
4
Professional Audio
Dual
Diaphragm
Condenser
Microphone
NEW!
4
USB Tabletop
Recording Microphone
Table top omnidirectional
microphone is perfect for speech/
dictation, legal records, audio for slide
presentations, laptop recording and
podcasts. Windows and MAC
compatible, simply plug into the computers USB port and
start recording using software normally included with the
computers operating system. Features: •Speech tailored
•Highly sensitive condenser element •10' USB cable for
flexible mic placement •Low profile for unobtrusive
recording •Mfr. #U7
Order #
35-2390
ONLY
$69.99
Cardioid Condenser
Mini Gooseneck Microphone
Length
15"
20"
Cardioid Condenser
Hanging Microphone
ONLY
$89.99
89.99
NEW!
Superior low noise microphones provide
wide, flat frequency response with
unsurpassed naturally transparent sound
quality. Cardioid pick-up pattern minimizes
feedback while reducing pick-up of
unwanted off axis sounds. Features:
•Electronics externally located in the
male XLR connector housing •Includes
30' cable •CM100 is finished in
durable black urethane paint
•CM100W is finished in
a durable white urethane
paint with a flexible PVC
covering over the gooseneck
Specifications: •Frequency response: 40Hz~20KHz
•Impedance: 500ohm •Self noise: 30dBA •Max SPL:
130dB •Phantom power requirements: 9~52VDC
•Mfr. #CM100
Order #
35-2440
35-2450
Color
Black
White
The B-2 Pro is ideal as a main and
support microphone for studio and live
applications. Features: •Pressuregradient transducer with shockmounted gold-sputtered dualdiaphragm capsule •Exceptionally
flat frequency response
(20Hz~20KHz) •Selectable
cardioid, omnidirectional or
figure eight pick-up pattern
•Switchable low-frequency roll-off
•Switchable input attenuation of -10dB
•Ultra low-noise transformerless FET input circuitry •3 pin
XLR output •Rugged construction with satin nickel-plated
brass body •Heavy-duty suspension mount, windscreen
and aluminum transport case included
Order #
35-2650
ONLY
$89.99
89.99
ONLY
$149.99
NEW!
Studio Condenser Microphone Three-Pack
Behringer has bundled three great-sounding dynamic
microphones into one impact-resistant case, with stand
adapters and mic clips so you’ll be ready to capture your
sound in brilliant resolution. Features: •On/off switch
•Extremely high signal output •Ultra-low distortion for
super clean sound •Presence lift in critical mid-range gives
you maximum voice projection •Exceptional off-axis
rejection eliminates feedback problems •Super rugged
construction •3 pin XLR connection •Frequency response:
80Hz~15KHz •Mfr. #XM1800S
Order #
35-2665
ONLY
$39.99
NEW!
NEW!
Superior low noise gooseneck microphones provide
wide, flat frequency response with unsurpassed
naturally transparent sound quality, with excellent
proximity effect when used close to the sound source.
Cardioid pick-up pattern minimizes feedback while
reducing pick-up of unwanted off axis sounds. Features:
•Durable textured urethane finish •Solid center section
with flexible goosenecks at top and bottom •Integral
XLR male connector •Available in 15" and 20" versions
Specifications: •Frequency response: 40Hz~20KHz
•Impedance: 500ohm •Self noise: 30dBA •Max SPL:
130dB •Phantom power requirements: 9~52VDC
•Mfr. #MG115
Order #
35-2420
35-2430
NEW!
Single
Diaphragm
Condenser Microphone
The cardioid-diaphragm B-1 is a home
recording enthusiast’s dream come true.
This professional-quality condenser
microphone is ideal as a main and
support microphone for studio and live
applications Features: •1" diaphragm
•Pressure gradient transducer with shockmounted gold-sputtered single-diaphragm
capsule •Switchable low-frequency rolloff and input attenuation •Ultra-low noise
level with transformerless FET input
circuitry •3 pin XLR output connector •+48V phantom
powered •Rugged construction with satin nickel-plated
brass body •Heavy-duty suspension mount, windscreen
and aluminum transport case included •Frequency
response: 20Hz~20KHz
Order #
35-2655
ONLY
$99.99
Two Matched
Studio
Condenser
Microphones
The C-2 microphones are built to
capture the performance of a choir,
piano or any other vocal or acoustic
sound source to provide a beautiful
true-to-life sound. Sold in perfectly
matched pairs, these condenser mics
are outstanding in both live and studio
applications. Features: •Low-mass
diaphragm for ultra-wide frequency
response (20Hz~20KHz) •Cardioid
pick-up pattern for effective feedback
elimination •Switchable low-frequency
roll-off and -10dB input attenuation
•Ultra low-noise transformerless FET
NEW!
input •3-pin XLR output Includes:
Microphone stand adapters, windscreens, stereo-bar
and transport case
Order #
35-2670
ONLY
$59.99
NEW!
Dynamic
Cardioid
Microphone
NEW!
Few things are
more essential to
recording or live performance than
dynamic microphones. Behringer’s
XM8500 has the crucial features and
durability you need. Features:
•50Hz~15KHz frequency response
•Cardioid characteristic with excellent
feedback suppression •Shock mount
system reduces handling noise •Twostage pop filter minimizes breath and
pop noises •Sturdy, reliable metal
construction and electromagnetic
shielding •Delivered in a rugged
hard case with microphone clip
and stand adapter
Order #
35-2660
Omnidirectional
Condenser
Measurement
Microphone
•Precision electric condenser microphone
•Perfectly complements the ULTRACURVE
PRO DEQ2496 or any RTA device •Ultra-linear
frequency response from 15Hz~20KHz
•Optimal for acoustic measurement applications
•Use with any real-time analyzer with +15
to +48V phantom power •Includes rugged
hard case, mic clip and stand adapter
•Mfr. #ECM8000
Order #
35-2675
ONLY
$19.99
Sub-Miniature 1Kohm Tie Clip Microphone
A sub-miniature tie clip microphone suitable for use in a variety of different fields
including entertainment, teaching and public address. Supplied with strong clip, 4m lead
and gold plated 3.5mm jack plug with battery housing (battery not included). Silver and
black finish. •Type: Electret condenser microphone •Head diameter: 8mm •Impedance:
1000ohm at 1KHz •Frequency response: 50Hz~18KHz •Sensitivity: -65dB ± 3dB at
1KHz •Polarpattern: Omni-directional •Battery: 1.35V mercury button cell
Order #
AR70933
page
104
(1-4)
$9.69
(5-9)
$8.99
1-800-543-4330
Fax: 1-800-765-6960
(10-up)
$7.99
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$49.99
Professional Audio
A
Multi–Channel Wireless System
B
System
AT831cW lavaliere microphone
ATM75cW headworn microphone
XLRW universal cable
ONLY
$89.99
99.99
19.99
200 PLL synthesized user selectable channels are
available, providing unsurpassed flexibility and immunity
to outside interference, regardless of the geographical area.
Well–shielded rugged metal 1⁄2–rack enclosures may be
mounted side–by–side in a single 19" rack space with
included hardware. Hand Held System: Includes the
True Diversity receiver and ATW-T341 hand held
dynamic microphone. UniPack™ System: Includes
the True Diversity receiver and ATW-T1310 belt pack
transmitter. This ultra compact transmitter measures only
3.43" (H) x 2.60" (W) x 0.94" (D) and accepts all Audio-Technica Wireless Essentials™ mic accessories (not included).
Order #
35-1307
35-1308
System
UniPack™ system Hand held system ONLY
$399.00
499.00
Wireless Microphone System
✔10 user selectable UHF channels
✔Improved true-diversity performance
✔Use up to 10 units in the same location
Audio-Technica 2000 Series system features True Diversity
reception with two separate RF sections for greater reliability.
Rugged metal 1⁄2 rack enclosure may be mounted side-by-side
in a single 19" rack space and includes all necessary rack
mount hardware. AT-2120 Hand Held System: Includes the
True Diversity receiver and ATW-T220 hand held dynamic
microphone. This mic features a cardioid pick-up pattern
ATW-2110 UniPack™ System: Includes the True Diversity receiver
and ATW-T210 belt pack transmitter. This ultra compact transmitter
measures only 3.63" (H) x 2.60" (W) x 0.89" (D) and accepts all
Audio-Technica Wireless Essentials™ mic accessories (not included).
Order #
35-1840
35-1845
System
UniPack™ system
Hand Held system
ONLY
$299.00
349.00
TwinMic™ Multi-Purpose
Wireless Microphone System
MicroSet™ Headworn Condenser Microphone
With a capsule diameter of just 2.5mm, the MicroSet
delivers the ultimate in low-profile, high-performance
audio. Under-ear design features a flexible lightweight
loop that hooks behind the ear for an ultra-secure,
comfortable fit with or without glasses. Industry standard
sound quality provides extremely intelligible natural audio
for stage and television talent, lecturers and houses of
worship and will meet the challenges of day-to-day use
in production and theater settings. Units are available in
standard black or “theater” beige. Note: These units are
part of the Audio-Technica Wireless Essentials group of
accessories, and are terminated exclusively for use with
the UniPack™ belt packs.
Order #
35-1855
35-1856
Color
Black
Beige
ONLY
$315.00
314.00
Provides convenience, freedom of movement and performance for
camcorders, karaoke, mobile DJs, schools, theaters and many other
applications. System includes: •PRO88 wireless receiver •PRO88
wireless transmitter •ATR20 hand held microphone •ATR35
clip-on microphone.
Choose the microphone that best suits your application: •ATR20 is great
for general presentations including lectures and interviews •ATR35
offers hands free versatility for more dynamic presentations (includes
windscreen and clothing clip). Either connects to the PRO88 transmitter,
which may be easily carried in a pocket or worn on a belt. The PRO88 receiver is
battery operated, allowing easy use with camcorders, portable and stationary PA
equipment. •Includes belt clip, camera shoe mount adapter, monitor earphone, audio
output cable, hook and loopfasteners, double sided foam tape, flexible antenna, 3.5mm to 1⁄4" plug adapter
Order #
35-985
Mfr. #
ATR288W
(ea.)
$211.00
(2-up)
$196.00
NEW!
NEW!
Condenser Shotgun
Microphone
The ATR6250 provides extremely
affordable, high-quality stereo pick-up
in a single microphone. Its compact
design is ideal for use with video
cameras and portable audio recorders.
Specifications: •Frequency response:
70Hz~18KHz •Impedance: 600ohm
Includes: •8" 3.5mm to 3.5mm camera
cable •10' 3.5mm to dual 3.5mm recording cable •Camera mount •Interchangeable mic-stand
base •Foam windscreen •Two 3.5mm to 1⁄4" adapters •“AA” battery
The ATR6550 cardioid
condenser is engineered
to pick-up dialogue and
sound effects at a distance,
while bypassing ambient
noise such as traffic, airhandling systems, room
reverberation and
mechanically coupled vibrations. Designed especially for use with video cameras.
Features: •3.5 mm connector plugs into your video camera •Two range settings:
“Normal” for close and medium-distance; “Tele” for long-distance Specifications:
•Frequency response: 70Hz~18KHz •Normal impedance: 1,000ohm, tele impedance:
2,200ohm Includes: •Attached 3' 3.5mm m/m cable •Camera mount •Microphone
stand clamp •Foam windscreen •3.5mm to 1⁄4" adapters •“AA” battery
Order #
35-2615
Order #
35-2620
Stereo Condenser Video/
Recording Microphone
ONLY
$29.99
Follow us on:
Product Questions Email: tech@MCMelectronics.com
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$49.99
page
105
4
AT831cW Lavaliere Microphone: Top performing lapel
cardioid condenser microphone also excels in acoustic
guitar applications. It provides crisp, full sounding
voice and instrument pick-up with excellent gain
before feedback and suppression of background noise.
This ultra compact unit weighs only 0.1 oz. and provides
40Hz~20KHz frequency response with 112dB dynamic
range. ATM75cW Headworn Microphone: Cardioid
condenser microphone combines professional quality
vocal pick-up with hands free operation. Cardioid pick-up
pattern ensures minimal feedback and ambient noise
rejection. The entire unit weighs only 2.1 oz. and provides
60Hz~15KHz frequency response with 96dB dynamic
range. XLRW Universal XLR Cable: Allows use of any
hand held Lo-Z microphone with a UniPack™ transmitter.
The cables female XLR connector attaches directly to any
high quality mic. Note: Other wireless essential
accessories are available via special order.
Order #
35-1310
35-1311
35-1312
4
✔200 user selectable UHF channels
✔Improved true-diversity performance
✔Use up to 20 units in the same location
Wireless Essentials™ Belt Pack Accessories
Fig.
A
B
-
Section
Section
4
Professional Audio
NEW!
A
A
E
E
B
D
B
C
D
F
Cardioid Dynamic Vocal/Instrument Microphone
4
C
VHF Wireless Systems
F
✔Preset VHF channel
✔Non-diversity receiver
✔Use up to 4 units in the same location
UHF Wireless Systems
✔8 user selectable UHF channels
✔Improved true-diversity performance
✔Use up to 8 units in the same location
Frequency agile wireless microphones utilize the
542~561MHz UHF band for improved performance and
reduced interference. All systems include the ATW-R700
receiver and AC adapter. Headworn System includes the
ATW-T701 UniPak™ transmitter and PRO 8HEcW head
worn microphone Lavaliere System includes the ATWT701 UniPak™ transmitter and tie clip microphone.
Hand Held System includes the ATW-T702 unidirectional
dynamic microphone transmitter and quiet-flex stand
clamp. Beltpack Only System includes the ATW-T701
UniPak™ transmitter only. This must be used with AudioTechnica’s Wireless Essentials microphone products.
Guitar System includes the ATW-T1701 UniPack™
transmitter and AT-GCW guitar/instrument input cable.
Order #
35-1950
35-1955
35-1960
35-1965
35-1970
Fig.
A+B+C
A+B+D
A+E
A+B
A+B+F
System
Head worn system
Lavaliere system
Handheld system Beltpack only system
Guitar / instrument system
ONLY
$289.95
249.95
229.95
209.95
229.95
Audio-Technica Freeway™ systems cost effective, solid
performance microphones that utilize the 169~172MHz
VHF band for reliable performance in most environments.
All systems include the ATW-R20 receiver and AC
adapter. Headworn System includes the ATW-T201
UniPak™ transmitter and AT889cW head worn
microphone Lavaliere System includes the ATW-T201
UniPak™ transmitter and ATW829cW tie clip
microphone. Hand Held System includes the ATW-T202
unidirectional dynamic microphone transmitter and quietflex stand clamp. Beltpack Only System includes the
ATW-T201 UniPak™ transmitter only. This must be used
with Audio-Technica’s Wireless Essentials microphone
products. Guitar System includes the ATW-T1701
UniPack™ transmitter and AT-GCW guitar/instrument
input cable.
Order #
35-1975
35-1980
35-1985
35-1990
35-1995
Fig.
A+B+C
A+B+D
A+E
A+B
A+B+F
System
ONLY
Head worn system
$145.00
Lavaliere system
125.00
Hand held system 99.99
Beltpack only system
89.99
Guitar/instrument system
99.99
Cardioid Vocal
Microphone
Cardioid dynamic design provides
natural, full range vocal reproduction
and is ideal for close-up vocal use in
performance and recording applications.
Features: •Superior internal shock mounting
•Cardioid polar pattern •Hi-ENERGY®
neodymium magnet for articulate vocal reproduction
•Two-stage ball-type head case for superior “pop”
protection •MagnaLock™ on/off switch •Corrosionresistant contacts •Gold plated XLR connector •Rugged
die cast design for reliable performance Specifications:
•Impedance: 300ohm •Frequency response: 90Hz~16KHz
•Includes stand clamp, thread adapter protective pouch
and 15' XLR male/female cord •Mfr. #PRO-41
Order #
35-625
(1-3)
$79.99
Professional
Microphone
•Professional quality
microphone designed for
both vocal and instrument miking
•Unidirectional (cardioid) polar pattern
•Frequency response: 60Hz~15KHz •Sensitivity: -56dB
•Impedance: 500ohm •Element: Moving coil dynamic
•Dimensions: 6" long, 2" head diameter, 17⁄32" to 7⁄8" tapered
body •Cable: Detachable 20' XLR to 1⁄4" phone plug •Stand
clamp included •Audio-Technica #ATR30
Order #
35-335
Cardioid Dynamic
Vocal/Instrument Microphone
This hand held dynamic mic is tuned for clear vocal and
instrument reproduction and consistent performance. Its
cardioid polar pattern reduces pick-up of sounds from the
sides and rear, improving isolation of desired sound source
and protecting against feedback. Features: •Rugged metal
construction •On/off switch Specifications: •Frequency
response: 60Hz~15KHz •Impedance: 500ohm Includes:
•Stand clamp and detachable 16.5' XLR to ¼" cable
•Mfr. #ATR1500
Order #
35-2610
Order #
35-750
Order #
35-420
ONLY
$69.99
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$29.99
ONLY
$49.99
ProPoint Hanging Microphone
Ideal for large area pick–up such as
choirs. This compact, low profile
microphone provides minimum
visibility and maximum performance.
The fixed back plate, permanently
polarized condenser element a
uniform polar pattern for maximum
rejection of feedback. Includes 25'
cable, permanently attached between
microphone and a male XLR type
connector. Includes windscreen and
steel hanger. Specifications: •S/N
ratio: 66dB •Dynamic range: 106dB
•Polar pattern: Unidirectional
•Frequency response: 70Hz~16KHz
•Weight: 15g •Impedance: 100W
•Output connector: Male XLR •Note:
Requires 9~52VDC phantom power
Lavalier Microphone
•This omnidirectional
lavalier condenser
microphone is well
suited for video use
•This “newscasterstyle” microphone is
practically invisible
•Comes with a lapel
clip, 20' cord with
3.5mm mini plug,
1
⁄4" adapter and foam moisture protector •Replacement
battery available LR44 (#291-345)
ONLY
$29.99
NEW!
ONLY
$34.99
This rugged dynamic
design with all metal
construction is the
perfect choice for
podium and mixer DJ mic/talkback
input. •Element: Dynamic •Polar pattern:
Unidirectional •Frequency
response: 150~10KHz •Open
circuit sensitivity: -55dB ±3dB,
1KHz @ 94dB SPL •Impedance: 500ohm •Dimensions:
171⁄2" (L) x 19⁄64" (H) x 3⁄4" (D) •Weight: 9.9 oz.
106
Order #
35-2605
(4-up)
$71.95
Gooseneck Microphone
with Switch and XLR
page
Engineered for durability, excellent speech intelligibility
and reliable performance, the ATR1300 is ideal for vocal
and instrument miking in performance and practice, and
features a unidirectional polar pattern for feedback
protection. Features: •Rugged metal construction •On/off
switch Specifications: •Frequency response: 70Hz~12KHz
•Impedance: 500ohm Includes: •Stand clamp and
detachable 16.5' XLR to ¼" cable
Order #
35-1020
35-1021
Mfr. #
PRO 45 (black color)
PRO 45W (white color)
NET 30
Terms
Customer Service: 1-877-626-3532
(1–3)
(4–up)
$114.00 $105.00
114.00 105.00
Professional Audio
ProPoint Gooseneck
Podium Microphones
Ideal for podium, conference room,
court rooms and other areas where
fixed location microphones are
required. Plug-in XLR mount.
Microphone element is a fixed charge
back plate, permanently polarized
condenser type. Specifications: •S/N
ratio: 66dB •Dynamic range: 106db
•Polar pattern: Unidirectional
•Frequency response: 70Hz~16KHz
•Power requirement: 9~52VDC
phantom power •Weight: 84g
•Impedance: 100Ω •Output connector:
Male XLR •Length: 16" •XLR mount
•Mfr. #PRO49QL
(1-3)
$119.00
NEW!
Stage 5T Three-in-One VHF Wireless System
(4-up)
$115.00
ProPoint® Boundary
Microphone
Ideal for use on
conference tables or
desktops, this very lowprofile microphone is
designed for minimum visibility
and maximum performance. The wide-range condenser
element, with low-mass diaphragm, offers a uniform
polar pattern for maximum rejection of unwanted sounds.
Rugged construction includes 25' cable, permanently
attached between microphone and a male XLR type
connector. Specifications: •S/N ratio: 65dB •Dynamic
range: 105dB •Polar pattern: Unidirectional •Frequency
response: 70Hz~14KHz •Power requirement: 9~52VDC
phantom power •Weight: 35g •Impedance: 100Ω •Output
connector: Male XLR •Mfr. #PRO 42
Order #
35-1010
4
With the Stage 5T System, Samson has provided
a wireless solution for every application in one convenient
package. This system combines a great sounding headset
microphone that is ideal for instructors, presenters and
DJs. It also includes an instrument cable for guitar and
bass, as well as a lavalier mic for interviews and
presentations. Features: •Great RF reception for
interference-free performance •Includes beltpack
transmitter, headset microphone, lavalier and instrument
cable •Half-rack VHF receiver design •On-board noise
reduction XLR and 1⁄4" outputs •Battery and signal level
meters •Ten hours of operation with 9V battery (included)
•AC adapter included •Mfr. #SW05SGLH
Order #
35-2560
ONLY
$89.49
4
Order #
35-1040
Section
True Diversity VHF Wireless Mic System
The Samson SR55 Series is an ideal solution in situations
where performance and cost are factors. Features: •True
diversity reception •Variable front panel squelch control
•Five segment signal strength meter •Balanced XLR and
unbalanced 1⁄4" output •Switchable line/mic level output
•Hand held and lapel models available to suit either
application Specifications: •Operating frequency:
173~213MHz •Frequency response: 40Hz~16KHz
•Transmitter battery: 9V alkaline (not included)
•Battery life: 14 hours typical
Hand Held System: Included hand held transmitter
features the popular Samson QMIC microphone element
for outstanding vocal clarity. Its cardioid pick-up pattern
provides outstanding immunity to off–axis sounds, thus
greatly reducing feedback.
Beltpack Lapel System: Includes the Samson
VT3L beltpack and detachable lavaliere microphone.
Perfect in lecture and presentation applications.
Order #
35-1200
35-1201
System
Hand held
Lavaliere
ONLY
$167.00
156.00
ONLY
$89.99
NEW!
ProPoint® Boundary
Microphone
Ideal for use on conference tables or
desktops, this very low-profile
microphone is designed for
minimum visibility and
maximum performance.
The wide-range
condenser element, with
low-mass diaphragm, offers
a uniform polar pattern for
maximum rejection of
unwanted sounds. Rugged construction includes 25' cable,
permanently attached between microphone and a male
XLR type connector. Specifications: •S/N ratio: 66dB
•Dynamic range: 86dB •Polar pattern: Unidirectional
•Frequency response: 70Hz~16KHz •Power requirement:
9~52VDC phantom power •Weight: 67g •Impedance:
100Ω •Output connector: Male XLR •Mfr. #PRO 44
Order #
35-1015
With the Stage 5H, Samson has provided a perfect wireless
solution for any presentation or performance application.
The system includes the HT5 hand held microphone
transmitter coupled with a Samson H5 dynamic mic
element to ensure lucid, accurate vocal reproduction.
since the transmitter is built right into the body of the
microphone, there’s no need for a beltpack. Features:
•Great RF reception for interference-free performance
•Half-rack VHF receiver design •On-board noise reduction
XLR and 1⁄4" outputs •Battery and signal level meters
•Ten hours of operation with 9V battery (included)
•AC adapter included •Mfr. #SW05SHCM-11
Order #
35-2565
ONLY
$79.49
ONLY
$99.99
Four Channel
Phantom Power
Supplies for
Condenser
Microphones
Single Channel
Phantom Power Supply
These units
conveniently use
110VAC power
and convert it into
phantom power. Provides 48VDC. Can be used to power
condenser microphones without interfering with dynamic
microphones on other channels. Perfect for use with
microphones #35-1020.
For use with condenser microphones when connected to
audio equipment that does not provide phantom power.
May be placed anywhere in-line after the microphone.
•Input: XLR female •Output: XLR male •Output voltage:
48VDC ±2V •Output current: 14mA •Frequency response:
10Hz~25KHz •Dimensions: 1.73" (H) x 5.12" (W) x
2.36" (D) •Power is supplied via included AC adapter
Order #
35-770
Order #
35-772
(1-3) $176.75 (4-up)
$170.69
Follow us on:
Product Questions Email: tech@MCMelectronics.com
NEW!
Stage 5H Hand Held
VHF Wireless Microphone System
Model #
AT8801
(1–3)
$69.99
AirLine 77
Wireless Headset
Microphone System
This wireless UHF
headset system offers a
true wireless experience
with no beltpacks and no cables, allowing complete
freedom of mobility. Includes two headsets designed to
go around the back of your head rather than over the top,
allowing the transmitter to be attached directly to the
headband and out of your way. Features: •XLR and
unbalanced 1⁄4" outputs with mic/line level output switch
headset transmitter features power/battery LED, power
switch and mute switch •Headset condenser mic is sweat
resistant and employs unidirectional cardioid pick-up
pattern for great sound •True diversity UHF wireless
headset system with PLL frequency control •CR77
receiver features audio level and RF level LED meters
•Squelch and volume control •AC adapter and 1⁄4" to 1⁄4"
cable included
Order #
35-2570
ONLY
$349.00
(4–up)
$64.84
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
107
Section
4
Professional Audio
NEW!
Concert Line Cardioid Microphone
The Q4 has a multi-axis shock mounted Neodymium
dynamic mic element, cardioid pick-up pattern and
convenient on/off switch. Ideal for live vocals,
presentations, or instrument micing. Includes:
•XLR mic cable, carrying pouch and clip •Mfr. #Q4CL
4
Concert 277 Dual
Channel Hand Held
Wireless System
Order #
35-2540
Designed for extreme versatility, the new Concert
277 offers an additional channel and a second professional
microphone. The Concert 277 is a dual channel true
diversity UHF wireless system that offers a professional
wireless solution for varying vocal applications. Features:
•Simultaneous operation of two HT7 included wireless
transmitters •Phase-locked loop circuitry for flawless
reception •Multi-segment RF level and peak audio
indicators for each channel •Squelch control for each
channel •Tuned molded antennas •Two independent ¼"
outputs or one ¼" mix output •Independent level controls
•Mfr. #SW277VSHQ7-N12
Order #
35-2580
Headworn
Condenser
Microphone
NEW!
ONLY
$29.49
Q6 Dynamic Cardioid Microphone
The Q6 dynamic hand-held mic features
a super cardioid pick-up pattern for
better off axis response. It is perfect
for vocal and instrument use. Features:
•High gain, low impedance design
•Neodymium dynamic mic element
•Super cardioid pick-up pattern •Multi
axis shock mounted element •Includes
XLR cable, carry pouch and mic clip
ONLY
$299.00
Order #
35-1888
NEW!
The Samson
SE50 Headworn
Microphone is a
low profile,
miniature condenser
microphone with a
2.5mm capsule that
provides outstanding
audio reproduction,
making it perfect for presentation, fitness and other vocal
applications. Features: •Omnidirectional pick-up pattern,
off-axis linear frequency response •Fits left or right ear
and retaining band holds mic in place •Moisture resistant
coating •Adjustable drip ring helps protect mic element
from sweat •Four cable adapters for compatibility with
most popular wireless transmitters •Includes three
windscreens, clothing cable clip and carry case
•Mfr. #SE50
Order #
35-2550
35-2551
35-2552
Color
Black
Cocoa
Beige
ONLY
$39.49
3
year limited
warranty
NEW!
The Concert 77 hand held microphone system is a high
performance UHF true diversity wireless solution ideal for
any application where freedom of mobility is important to
your vocal performance. Using state-of-the-art microphone
technology, the concert 77 is engineered to the finest
detail to provide the ultimate in sound reproduction and
professionalism. Features: •Phase-locked loop (PLL)
circuitry for flawless reception •Balanced XLR and ¼"
output jacks •Front panel power switch, RF level meter
and squelch control •Mute switch, gain control •9V battery
operation, LED battery level meters •Mfr. #SW77VSHQ7
Order #
35-2590
ONLY
$199.00
3
year limited
warranty
R11 Hypercardioid
Vocal Microphone
3-Pack
Concert 77 UHF Wireless Hand Held System
✔Low cost die-cast
microphone
✔Performance and
public speaking
The R11 is an affordable
die-cast dynamic
microphone, offering
professional performance and quality at an entry level
price. Hypercardioid polar pattern provides maximum
feedback rejection and a neodymium magnet offers
higher output required in today’s live performances.
Specifications: •Frequency response: 50Hz~15KHz
•Sensitivity: -71dB •Max SPL: 137dB •Output: Male
XLR, 600ohm unbalanced •Overall length: 6" •Head
diameter: 1.8" •Kit includes three microphones and three
stand adapters •Note: Cords not included
Order #
35-1246
R21 Cardioid Vocal
Microphone 3–Pack
✔Low cost rugged ABS microphone
✔Vocal, karakoe and DJ applications
The R21 offers the ideal solution to those seeking
professional performance on a budget. Cardioid
polar pattern provides very good feedback and ambient
noise rejection. Specifications: •Frequency response:
80Hz~12KHz •Sensitivity: -51dB •Output: Male
XLR, 500ohm unbalanced •Overall length: 6.85"
•Head diameter: 2.125" •Kit includes three microphones
and three stand adapters •Note: Cords not included
Order #
35-1248
ONLY
$69.49
NEW!
AIrline 77 UHF Wireless Hand Held System
The AirLine 77 UHF true diversity hand held system offers
a true wireless experience allowing complete freedom of
mobility. The system includes the CR77 receiver and an
AX1 hand held transmitter, which plugs into any standard
dynamic microphone to make it wireless. A Samson Q7
dynamic microphone is also included for a total solution.
Features: •Transmitter has power switch, power/battery
LED and input level control •Single “AAA” battery
operation allows up to 14 hours of life •PLL frequency
control •Receiver includes multi-segment audio level and
RF level LED meters •Squelch and volume control •XLR
and unbalanced 1⁄4" outputs with mic/line level output
switch •AC adapter and 1⁄4" to 1⁄4" cable included
•Mfr. #SW7AVSHX
Order #
35-2600
page
108
ONLY
$269.00
ONLY
$49.49
Q–6 Dynamic
Microphone Three Pack
Good feedback rejection and high output
gain make the Samson Q8 ideal for live
sound reinforcement applications. Vocals
sound huge and instrument micing is
crystal clear. It is also a versatile tool
in the recording studio, or virtually
any professional application. Features:
•High gain output •Low impedance
•Neodymium element •Super cardioid
pick-up pattern •Multi axis shock
mounted element •Includes carry case
and mic clip •Note: Cord not included
The Q6 dynamic hand held
steps it up a notch with a
super cardioid pick-up
pattern for better off axis
response. It is perfect for
vocal and instrument micing.
Value priced three–pack
enables sold performance
for the budget minded
venue. Features: •High
gain output •Low impedance
•Neodymium element •Super
cardioid pick-up pattern
•Multi axis shock mounted
element •Includes clip
Order #
35-1890
Order #
35-1900
Q–8 Dynamic Microphone
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$199.00
199.00
199.00
ONLY
$129.00
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$99.49
Gooseneck Podium
Microphones
Professional Audio
#35-1917
Dynamic
USB Super Cardioid Microphone
Order #
35-1915
35-1916
35-1917
Mfr. #
CM15P
CM20P
XFM1
Description
15" gooseneck
20" gooseneck
XLR base
ONLY
$89.49
99.49
19.99
The Q1U features a smooth sounding
neodymium element, capable of handling
high SPL, an onboard microphone pre-amp,
A/D convertor and USB output. Just plug in
the supplied USB cable, launch your computers
digital audio software and start recording. The
extended frequency and fast transient response
insures an accurate reproduction with linear
characteristics from bottom to top. The Q1U is
perfect for vocals, acoustic instruments and
overhead cymbals, and can handle high SPL
from drums or instrument amps. SoftPre applets
are available for windows use, directly from
www.samsontech.com, however they are not
required. This microphone will work directly with
Windows 98 and Windows XP without need for additional
hardware or software. Includes USB cable, tripod desk
stand and carry pouch.
Order #
35-1887
ONLY
$69.49
Multi–Pattern True Capacitor
Studio Condenser Microphone
Hand Held Condenser Microphone
The Samson CO5 hand held microphone
provides the benefits of a studio condenser
mic, in a hand held design. It is perfect for all
aspects of vocal or instrument use, in stage or
recording applications. Features: •Smooth flat
frequency response •Multi–axis shock
mounted element •Heavy gauge mesh
grill •Gold plated male XLR adapter
Specifications: •Frequency response:
40Hz~18KHz •Required phantom power:
36V~52V •Carry case and stand adapter
•Note: Cord not included
Order #
35-1730
ONLY
$89.49
Large Diaphragm Studio
Condenser Microphone
The Samson CO3 Studio Condenser
microphone adds warmth and richness to
acoustic guitar and vocals, and also excels as
an overhead drum or room mic. The large
19mm diaphragm enables low frequency
response that is impossible for conventional
microphones. Selectable pick-up pattern
enable the user to choose from super cardioid,
omnidirectional and figure-8 patterns
Features: •Smooth flat frequency response
•Heavy gauge mesh grill •Gold plated male XLR
connector •Swivel mic stand adapter •LED phantom
power indicator Specifications: •Frequency response:
40Hz~18KHz •Element type: back condenser •Sensitivity:
-33dB/Pa •Max SPL: 136dB •Required phantom power:
36V~52V •Dimensions: 7" (H) x 2.125" (W) x 2.125" (D)
•Weight: 1.1 lbs. Includes foam filled case and stand
adapter •Note: Cord not included
Order #
35-1725
ONLY
$119.00
Order #
35-1880
Large Diaphragm Studio
Condenser Microphone
The Samson CO1 Studio Condenser
microphone adds warmth and richness to
acoustic guitar and vocals, and also excels
as an overhead drum or room mic. The large
19mm diaphragm enables low frequency
response that is impossible for conventional
microphones. Features: •Smooth flat
frequency response •Heavy gauge mesh grill
•Gold plated male XLR adapter •Swivel mic
stand adapter •LED phantom power indicator
Specifications: •Frequency response:
40Hz~18KHz •Polar pattern: Hyper cardioid
•Element type: Back condenser •Sensitivity: -33dB/Pa
•Max SPL: 136dB •Required phantom power: 36V~52V
•Dimensions: 7" (H) x 2.125" (W) x 2.125" (D) •Weight:
1.1 lbs. •Includes foam filled case and stand adapter
•Note: Cord not included
ONLY
$79.49
Studio Microphone Shock Mount
Designed exclusively for the Samson CO1 and CO3 microphone, this shock mount
dampens unwanted noise that is typically transmitted through the mic stand in to the
mic. Mounts to standard mic stand.
Order #
35-1261
ONLY
$39.49
Follow us on:
Product Questions Email: tech@MCMelectronics.com
The Samson C01U is based on the C01
large diaphragm condenser microphone. It
features a 19mm internal shock mounted
diaphragm, with cardioid pick-up pattern,
ensuring pristine studio quality recordings.
It provides a simple affordable way to
capture high quality vocal and acoustic
instrument performances on any Mac or
PC, desktop or laptop, and works perfectly
with any DAW software. Direct USB
connection (cable included) eliminates the
need for in/out boxes, external computer
pre-amps, or special sound cards.
Features: •Smooth flat frequency response
•Heavy gauge mesh grill •Swivel mic
stand adapter •LED power indicator
Specifications: •Frequency response:
40Hz~18KHz •Polar pattern: Hyper
cardioid •Dimensions: 7" (H) x
2.125" (W) x 2.125" (D)
ONLY
$99.49
Pencil Condenser
Microphone Pair
ONLY
$149.00
Order #
35-1260
Direct USB
Studio Condenser Microphone
Order #
35-1885
The Samson CL8 true capacitor condenser
microphone element utilizes dual 1.1" ultra
thin gold spluttered diaphragm capsules,
providing multi pattern operation.
Capacitor-based elements are warmer,
brighter and bigger sounding than electret
based elements, faithfully reproducing a
variety of sound sources with amazing
clarity and detail. Features: •Selectable
super cardioid, omni and figure 8 pick-up
patterns •Switchable 12dB/octave hi–pass
filter at 100Hz •Switchable 10dB pad
•36~52V phantom power operation
•Internal shock mount •Solid die-cast construction
•Included swivel stand mount and carry case
•Note: Cord not included
4
4
These high-quality
condenser
microphones are
ideal for any podium
application. The
cardioid pick-up pattern provides optimum #35-1915
sound quality for speech and presentations,
with good rejection of unwanted noise and feedback.
Features: •Models available with 15" and 20"
gooseneck •Internal selectable high pass filter •Male
XLR connector •Included flange mount •Multi-stage
windscreen Specifications: •Frequency response:
60Hz~16KHz •Sensitivity: -40dB/Pa •Nominal
impedance: 600ohm •SPL: 127dB •Dynamic range:
103dB •S/N ratio: 70dB •9~52VDC phantom power
required •Optional XLR female base with attached 30'
and XLR male connector sold separately
Section
The Samson C02 Condenser
mic pair provides a highly
focused cardioid pattern for
precise instrument or
overhead mic applications.
The exceptionally high SPL
capability makes these
perfect for piano, drums,
cymbals, and other percussion applications. Features:
•Smooth flat frequency response •Heavy gauge mesh
grill •Gold plated male XLR adapter Specifications:
•Frequency response: 50Hz~18KHz •Polar pattern:
Hyper cardioid •Element type: Back condenser •Required
phantom power: 36V~52V •Includes carry case and two
stand adapters •Sold in pairs •Note: Cords not included
Order #
35-1720
ONLY
$139.00
USB Condenser
Microphone with
Onboard Mixing
The Samson G-Track is a
USB condenser microphone
with a built-in audio
interface and mixer. Allows
simultaneous input of
vocals and guitar, bass, or
keyboard while providing
monitoring through an on
board headphone output.
Performers can directly
record vocals and
instruments quickly and
easily with one device. Records: •Vocals like a
standard USB mic •Two mono instruments through a
line/instrument input •A mix of one mono instrument and
vocal Includes: •Stand mount •USB cable •All the cables
needed to connect any musical instrument with a standard
1
⁄4" or RCA output •Cakewalk Sonar LE software •Optional
shock mount (shown) is available separately
Order #
35-2190
35-2191
MCMelectronics.com
Email: quotes@MCMelectronics.com
Description
G-Track microphone
Shock mount
ONLY
$149.00
39.99
page
109
Section
4
Professional Audio
4
Direct USB Cardioid
Dynamic Microphone
Low cost molded microphone provides
a simple affordable way to capture highquality vocal and acoustic instrument
performances on any Mac or PC, desktop
or laptop, and works perfectly with any
DAW software. Direct USB connection
eliminates the need for in/out boxes,
external computer pre-amps, or special
sound cards. USB 2.0 output is Windows
and Mac compatible, no driver software
is required. Features: •Smooth flat
frequency response •Attached 10' cord
Specifications: •Frequency response:
50Hz~16KHz •Impedance: 600ohm
•Polar pattern: Cardioid •Dimensions:
1
8 ⁄4" (L) x 2" (dia at widest point)
Order #
35-2195
(1-3)
$19.99
(4-up)
$17.95
Condenser
Boundary
Microphones
The Samson CM
Series of surface
mounted
microphones
is intended for
professional
applications on lecterns, conference tables and news desks
in stage or boardroom applications. Their boundary design
is ideal for capturing sound in focused areas. Features:
•Models available in unidirectional or omnidirectional
configurations •Condenser element •Half cardioid pick-up
pattern •Internal high pass filter •Mic has mini XLR
connector •Included detachable 30' cable is terminated
with standard XLR male connector Specifications:
•Frequency response: 30Hz~18KHz •Sensitivity: -39dBV/
Pa •Nominal impedance: 600ohm •SPL: 127dB •Dynamic
range: 70dB •Dimensions: 3.35" (dia.) x 0.87" (H)
•9~52V phantom power required
Order #
35-1905
35-1910
Mfr. #
CM10B
CM11B
Pattern
Cardioid
Omnidirectional
ONLY
$99.49
99.49
PGX Series True Diversity
Wireless Microphones
SLX Series True Diversity
Wireless Microphones
SLX wireless microphone systems offer improved truediversity performance, UHF operation and automatic
transmitter set-up that syncs transmitters to receiver
selected frequencies. With 960 channels available, 20
units may be used at the same time. Features: •Auto
frequency selection •Auto transmitter set-up •Patented
audio reference companding •LCD channel display on
both receiver and transmitter Specifications: •Range: 300'
•Outputs: Unbalanced 1⁄4" line level •Balanced XLR mic
level Power requirements: •Two “AA” alkaline batteries
(transmitter) •12~18VDC (receiver), AC adapter included
•Operating frequency range: 518~752MHz •System
frequency response: 45Hz~15KHz Hand held system:
•Includes the legendary SM58 microphone element
•Transmitter dimensions: 10" (L) x 2" (dia.) Lavaliere
system: •Includes the Shure WL185 compact lavaliere
condenser mic with beltpack transmitter •Beltpack
measures 4.25" (H) x 2.5" (W) x 1" (D)
Order #
35-1671
35-1681
Mfr. #
SLX24/SM58
SLX14/85
System Hand held
Lavaliere ONLY
$617.00
679.00
✔Low cost rugged
ABS microphone
✔Vocal and instrument use
✔15' cable
•Unidirectional (cardioid)
pattern dynamic microphone •Impedance: 600ohm
•Frequency response: 100Hz~10KHz •Sensitivity: -72dB
•Element: Moving coil dynamic •Dimensions: 7" long, 2"
head diameter •Cable: 15' with XLR jack to 1⁄4" plug
•Weight: 71⁄2 oz. •High-impact ABS plastic body
ONLY
$15.49
Order #
35-1920
page
110
Mfr. #
CM12C
ONLY
$411.00
442.00
Features a compact, easy to carry
design, a long 9'8" microphone cord, wide
frequency response (100Hz~10KHz), and a
UniMatch® plug. Weight: 4.1 oz. including
cord. Dimensions: 2" diameter x 61⁄2"
length. Sensitivity -56dB (open circuit
output level) and impedance 300ohm.
Order #
F-V100
(1-9)
$8.99
(10-up)
$7.99
Natural Sound Vocal Microphone
Order #
35-505
Order #
FV-420
ONLY
$99.49
1-800-543-4330
Fax: 1-800-765-6960
System Hand held
Lavaliere
•Unidirectional (cardioid) pattern dynamic
microphone •Ideal for use with karaoke
machines •Impedance: 600ohm •Frequency
response: 80Hz~12KHz •Sensitivity: -72dB
•Element: Moving coil dynamic •Dimensions:
7" long, 2" head diameter •Cable: 15' with
XLR jack to 1⁄4" plug •Weight: 9 oz.
✔Low cost die-cast microphone
✔Vocal and instrument use
✔15' cable
The CM12C is a miniature condenser
microphone designed to hang directly
over a choir or orchestra. The steel
hanging positioning bracket places
the condenser element in the proper
position to properly capture the
performance. Features: •Condenser
element •Cardioid pick-up pattern
•Mini XLR connector •Hardwired 30'
cable •Mini to standard XLR connector
included •Multistage windscreen
Specifications: •Frequency response:
50Hz~18KHz •Sensitivity: -40dB/Pz
•Nominal impedance: 200ohm SPL:
136dB •Dynamic range: 112dB
•S/N ratio: 70dB •9~52VDC
phantom power required
Mfr. #
PGX24/SM58
PGX14/85
•Unidirectional vocal microphone •Wide,
clear, natural sound reproduction without
coloration for highest sound purity •Highly
suitable for vocalists with wide dynamic
range and superior voice projection
•Built-in on/off switch •Cannon connector
provides durable and reliable connections
Specifications: •Frequency range:
80~15,000Hz •Sensitivity: 52dB
•Impedance: 600ohm •Cord: OFC,
9'8" (3m) length •Plug: Gold-plated,
mini plug with Unimatch® adapter
•Dimensions: 21⁄6" diameter x 71⁄2"
length •Weight: 11.7 oz. (331g)
Heavy-Duty Unidirectional Microphone
Hanging Condenser Microphone
Order #
35-1701
35-1711
Omnidirectional
Dynamic Vocal Microphone
Economical
Unidirectional
Microphone
Order #
35-500
PGX wireless microphone systems offer improved truediversity performance, UHF operation and both balanced
and unbalanced outputs. With a variety of channels
available, up to eight units may be used at the same time.
Features: •Auto frequency selection •Auto transmitter
set-up •Patented audio reference companding
Specifications: •Range: 300' •Outputs: Unbalanced 1⁄4"
line level •Balanced XLR mic level Power requirements:
•Two “AA” alkaline batteries (transmitter) •12~18VDC
(receiver), AC adapter included •Operating frequency
range: 596.0~865.0MHz •System frequency response:
45Hz~15KHz Hand held system: •Includes the legendary
SM58 microphone element •Transmitter dimensions: 10"
(L) x 2" (dia.) 4.25" (H) x 2.5" (W) x 0.75" (D) Lavaliere
system: •Includes the Shure WL185 compact lavaliere
condenser mic with beltpack transmitter •Beltpack
measures 4.25" (H) x 2.5" (W) x 1" (D)
ONLY
$19.99
(1-3) $29.99
(4-up)
$28.79
Phantom I Phantom Power Supply
48V supply externally provides power to high quality condenser microphones,
when used with equipment not supplying phantom power. Specifications: •Input
connection: Female XLR •Output connection: Male XLR •Power requirements:
Supplied 18VDC adapter •Dimensions: 5.25" (H) x 2.75" (W) x 1.75" (D)
Order #
555-2750
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$57.49
Professional Audio
Section
4
SH55 Series II
Classic Microphone
Assistive Listening System
Order #
35-1805
35-1806
35-1807
Mfr. #
ALD-800
ALD-800R
EB-3
Description Complete system Additional receiver
Additional headsets
ONLY
$379.00
52.99
6.39
PG57 Dynamic Instrument Microphone
This versatile microphone is tuned specifically
for amplified or acoustic instruments. Features:
•Smooth extended tailored frequency response
•Cardioid polar pattern is less susceptible to
feedback in high volume settings •Dynamic
cartridge has a simple, rugged coil •Handles
high SPL without distortion •Cartridge includes a
neodymium magnet for high output level •Internal
shock mount reduces handling noise •Durable
metal construction •On/off switch •Hardened steel
mesh ball grill resists wear and abuse •Frequency
response: 50Hz~15KHz •Includes 15' detachable
XLR type cable
Order #
35-1640
Model #
PG57-XLR
Cable
XLR-XLR
ONLY
$59.49
Order #
35-1655
The SM48 unidirectional dynamic
microphones are designed for professional
sound reinforcement, studio recording, and
broadcasting applications. They maintain
a true cardioid pattern throughout their
frequency range, ensuring high gain before
feedback and rejection of off-axis sound.
The tailored frequency response is ideal for
vocals. A presence rise brightens mid-range
performance, and a low frequency roll off
controls proximity effect. Features: •Shock
mounted cartridge •Steel mesh grill with
integral “pop” filter •Supplied stand adapter
and storage pouch •Frequency response:
550Hz~14KHz •Utilizes detachable XLR
type cable, not included
Order #
35-1615
4Legendary
4Lead and back-up vocals
4Available with or without slide switch
Consistently the first choice of performers around
the globe, this unidirectional dynamic microphone
is designed for live performance, sound
reinforcement, and studio recording. Highly effective
spherical filter minimizes wind and breath “pop”
noise. Cardioid pick-up pattern isolates the main
sound source while minimizing unwanted background
noise. Rugged construction, a proven shock mount
system, and a steel mesh grill ensure that even with
rough handling, the SM58 will perform consistently.
Features: •Frequency response tailored for vocals, with
brightened midrange and bass roll off •Pneumatic shockmount system •Included break-resistant stand adapter
•Frequency response: 50Hz~15KHz •Models available
with or without switch •Utilizes detachable XLR type
cable, not included
Order #
35-1605
35-1606
SM48 Vocal Microphone
Model #
SM48-LC
Length
100'
150'
(1-2)
$339.00
438.00
(3-up)
$303.00
380.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
ONLY
$103.00
114.00
✔Designed for professional
sound reinforcement
✔Lead and back-up vocals and speech
The Beta 58A is a high output dynamic
vocal microphone designed for professional
sound reinforcement and project studio
recording. Rugged construction, proven
pneumatic shock-mount system, and hardened
steel mesh grill insure superb performance in
rough handling environments. •Frequency
response: 50Hz~16KHz •Utilizes detachable
XLR type cable, not included
ONLY
$69.49
Order #
35-1620
✔Cost effective spoken word microphone
✔Stage and presentation use
✔15' cable
Model #
Beta 58a
ONLY
$159.00
SM57 Instrument Microphone
✔Musical instrument recording
✔Suitable for drum miking
Features: •Cardioid polar pattern is less
susceptible to feedback in high volume settings
•Dynamic cartridge has a simple, rugged coil
•Handles high SPL without distortion •Cartridge
includes a neodymium magnet for high output
level •Durable metal construction •On/off switch
•Frequency response: 70Hz~15KHz •Includes
15' detachable cable
Model #
PG48-QTR
PG48-XLR
Cable
XLR-1⁄4"
XLR-XLR
ONLY
$41.99
41.99
The SM57 is ideal for live sound reinforcement and
recording. It has an extremely effective cardioid pick-up
pattern which isolates the main sound source while
minimizing background noise. Features: •Contoured
frequency response for clean, instrumental reproduction
and rich vocal pick-up •Professional-quality reproduction
for drum, percussion, and instrument amplifier miking
•Frequency response: 40Hz~15KHz •Utilizes detachable
XLR type cable, not included
Order #
35-1600
1
This is the perfect cable snake
when high quality and low cost are important. All 20
channels (16 send and four return) utilize XLR type
connectors, harnessed to a single heavy-duty, highly
flexible multi-conductor cable. The input box features
durable steel construction and includes 20 chassis
mounted XLR connectors, 16 female sends and four male
returns. The output side features a steel cable strain relief
to prevent excess stress to the connectors, both on the
snake and your mixing console. •Box dimensions:
3" (H) x 7" (W) x 111⁄2" (D) •Cable diameter: 1"
Switch
No
Yes
Beta 58A Vocal Microphone
year limited
warranty
20 Channel
Cable Snakes
Model #
SM58-LC
SM58S
PG48 Dynamic Vocal Microphone
Order #
35-1630
35-1631
Order #
555-1530
555-1535
ONLY
$159.95
SM58® Cardioid Vocal Microphone
ONLY
$90.49
PG58 Dynamic Vocal Microphone
✔Cost effective unit tailored after the legendary SM58
✔Lead and back-up vocals
✔15' cable
Premium Quality
Microphone Cables
Constructed with two conductor, shielded, vinyl jacketed,
broadcast type cable, with hand soldered connectors.
Order #
Length
XLR Male to Female Cable
35-1340
10'
35-1341
20'
35-1342
25'
35-1343
30'
35-1344
50'
35-1345
100'
1
XLR Female to ⁄4" Cable
35-1346
10'
Model #
SM57-LC
(1–3)
(4–up)
$21.49
23.99
24.99
25.99
29.99
41.99
$19.79
22.39
22.99
23.99
27.59
38.99
10.49
9.47
Features: •Cardioid polar pattern is less
susceptible to feedback in high volume
settings •Dynamic cartridge has a simple,
rugged coil •Handles high SPL without distortion
•Cartridge includes a neodymium magnet for
high output level •Internal shock mount reduces
handling noise •Durable metal construction
•On/off switch •Frequency response: 60Hz~15KHz
•Includes 15' detachable cable
Order #
35-1635
35-1636
MCMelectronics.com
Email: quotes@MCMelectronics.com
Model #
PG58-QTR
PG58-XLR
Cable
XLR-1⁄4"
XLR-XLR
ONLY
$59.49
62.99
page
111
4
Wireless listening system accepts signal
from virtually any sound source including
PA systems, home audio equipment or
a single microphone. The ALD-800 consists of a single
transmitting unit, and four beltpack receivers, each
with an earbud headset. Beltpack receivers are available
separately, and limitless number may be used with a
single transmitter. With typical range of 300', this system
is perfect for use in lecture halls, theaters, houses of
worship and conference rooms, and is in full compliance
with ADA regulations. The system operates the
72~76MHz band, specifically allocated by the FCC for
ALD systems, with wideband FM for superior quality
audio (mono). Specifications general: •Audio frequency
response: 100Hz~15KHz •S/N ratio: 60dB •THD: < 0.5%
Transmitter: •Mic input: 1⁄4" unbalanced, 9VDC phantom
power •Line input: 1⁄4" unbalanced •Power requirements:
9VDC, 200mA, AC adapter included •Dimensions:
1.25" (H) x 8.25" (W) x 4.25" (D) Receiver: •Audio
output: 250mW @ 16ohm •Connection: 3.5mm jack
•Battery: 9V alkaline (#292-030), not included •Battery
life: 17~20 hours typical •Dimensions: •3.35" (H) x
2.75" (W) x 0.75" (D)
Classic styled dynamic microphone is
ideal for public address or theater stage
sound systems, as well as broadcasting
and recording. The rugged swivel base
houses the on/off switch, 3 pin male
XLR connector and threaded opening
for standard microphone stands.
Features: •Modern performance with
classic appearance •Cardioid directional
pattern for optimum performance in
adverse acoustic environments •Shock
mounted cartridge •Rugged
chrome plated die-cast case
and mechanical design for
reliability under rigorous
conditions •Self-tensioning
swivel mount (45° forward, 80°
backward) •Compatibility with mic inputs from
75~300ohm Specifications: •Output type: Balanced XLR
•Frequency response: 50Hz~15KHz •Impedance: 270ohm
•Net weight: 22 oz.
Section
4
Professional Audio
NEW!
NEW!
Four Channel Wireless
Microphone System
NEW!
Dual VHF Wireless Microphone System
4
Low Cost VHF Diversity
Wireless Microphone
Low cost wireless mic system is ideal for close range
situations and is perfect for presentations and karaoke
use. True diversity receiver system provides improved
performance, especially at the fringes of reception range.
Features: •Front panel power and rotary volume control
•LED indicators for receiver status and volume level •XLR
mic and 1⁄4" line outputs •110/220VAC operation •50' range
under normal conditions •Requires two “AA” batteries, not
included •Mfr. #PDWM1500
Order #
35-2250
(1–3)
$53.99
Low cost wireless mic system is ideal for close range
situations where two separate microphones are needed.
It is perfect for presentation, stage and karaoke use.
Features: •Independent front panel level control
for each microphone •LED indicators for power and
receiver status •LED bargraph input level indicator for
each channel •Independent balanced XLR mic outputs
•Combined unbalanced 1⁄4" line level output •12VDC
operation, adapter included •100' range under normal
conditions •Each microphone requires one 9V battery,
not included •Mfr. #PDWM2700
Order #
35-2265
(4-up)
$72.25
Order #
35-2270
(4–up)
$52.25
Dual VHF
Wireless
Microphone
System
Low cost
wireless mic
system is ideal
for close range situations where two separate microphones
are needed. It is perfect for presentations and karaoke use.
Two channel receiver combines the signal from both
included microphones, and provides a single 1⁄4" output.
Features: •Independent front panel level control for each
microphone •LED indicators for power, receiver status and
volume level •1⁄4" line level output •12VDC operation,
adapter included •100' range under normal conditions
•Each microphone requires one 9V battery, not included
•Mfr. #PDWM2500
(1–3)
$59.99
(4–up)
$56.95
Low cost wireless mic system is ideal for close range
situations where four separate microphones are needed.
1RU rack mount receiver houses four independent VHF
receivers. VHF operation (210~280MHz) and super
heterodyne receiver ensure good performance in
karaoke and presentation situations. The set includes
four completely self contained hand held microphones.
Microphones operate on a standard 9V battery (#292-035),
not included, which typically provides eight hours of
operation. Specifications: •Range: 50' normal conditions,
100' max •Frequency response: 50Hz~15KHz •Receiver
output: Balanced XLR line level and unbalanced 1⁄4" (mic
level) of all four microphones combined, also provided
is a separate unbalanced 1⁄4" mic output for each mic
•Power requirements: 110VAC, AC adapter included
•Mfr. #PDMW5500
Order #
35-2275
(1–3)
$139.00
(1–3)
$169.00
(4–up)
$159.00
NEW!
Four Channel Wireless
Microphone System
✔4 preset VHF channels
✔2 hand held and 2 headset microphones
✔Single mixed output
Low cost wireless mic system is ideal for close range
situations where four separate microphones are needed.
1RU rack mount receiver houses four independent VHF
receivers. VHF operation (210~280MHz) and super
heterodyne receiver ensure good performance in karaoke
and presentation situations. The set includes two hand held
microphones and two beltpack transmitters. Each beltpack
transmitter may be used with either the lapel clip mic, or
headset mic, both included. Microphones operate on a
standard 9V battery (#292-035), not included, which
typically provide eight hours of operation. Specifications:
•Range: 50' normal conditions, 100' max •Frequency
response: 50Hz~15KHz •Receiver output: Balanced XLR
line level, unbalanced 1⁄4" (mic level), also provided is a
separate unbalanced 1⁄4" mic output for MIC1 only •Power
requirements: 110VAC, AC adapter included
Order #
35-1792
Mfr. #
PDWM4300
Four Channel Wireless
Microphone System
Dual UHF Wireless
Microphone System
(4–up)
$132.00
Four Channel
Wireless
Microphone
System
NEW!
NEW!
Order #
35-2255
(1-3)
$75.99
Low cost wireless mic system is ideal for close range
situations where four separate microphones are needed.
1RU rack mount receiver houses four independent VHF
receivers. VHF operation (210~280MHz) and super
heterodyne receiver ensure good performance in karaoke
and presentation situations. The set includes four beltpack
transmitters, each may be used with either the lapel clip
mic, or headset mic, both included. Microphones operate
on a standard 9V battery (#292-035), not included, which
typically provide eight hours of operation. Specifications:
•Range: 50' normal conditions, 100' max •Frequency
response: 50Hz~15KHz •Receiver output: Balanced
XLR line level and unbalanced 1⁄4" (mic level) of all
four microphones combined, also provided is a
separate unbalanced 1⁄4" mic output for each mic
•Power requirements: 110VAC, AC adapter included
•Mfr. #PDMW4400
(1-3)
$149.00
(4-up)
$139.00
“Cable
Detective” Cable Tester
✔4 preset VHF channels
✔4 hand held microphones
✔Single mixed output
Low cost wireless mic system is ideal for close range
situations where two separate microphones are needed. It
is perfect for presentation, stage and karaoke use. UHF
operation (900MHz) provides improved performance and
reduced interference compared to lower cost VHF models.
Features: •Independent front panel level control for each
microphone •LED indicators for power and receiver status
•LED bargraph input level indicator for each channel
•Independent XLR mic outputs •Combined 1⁄4" line level
output •12VDC operation, adapter included •100' range
under normal conditions •Each microphone requires one
9V battery, not included •Mfr. #PDWM2600
Low cost wireless mic system is ideal for close range
situations where four separate microphones are needed.
1RU rack mount receiver houses four independent VHF
receivers. Microphones operate on a standard 9V battery
(#292-035), not included, which typically provide eight
hours of operation. Specifications: •Range: 50' normal
conditions, 100' max •Frequency response: 50Hz~15KHz
•Receiver output: Fixed level balanced XLR, and variable
level unbalanced 1⁄4" (mic level) •Power
requirements: 110/220VAC
Quickly tests most cables
used in professional audio
applications. Checks cables
terminated with male XLR,
RCA type phono, two and
three conductor 1⁄4". Will check
cables with same or different
connectors on each end. Push
switch allows testing of Lo–Z
cables. Housed in very heavy,
road–worthy steel case. Approximate dimensions: 3" (L) x
1
4" (W) x 1 ⁄2" (H). Fits easily in tool box. Requires 9V
battery (#291-060), not included.
Order #
35-2260
Order #
35-1790
Order #
555-3170
page
112
(1–3)
$109.00
(4–up)
$104.00
Mfr. #
PDWM5000
1-800-543-4330
Fax: 1-800-765-6960
(1-3)
$165.00
(4-up)
$155.00
NET 30
Terms
Customer Service: 1-877-626-3532
(1-3) $40.49
(4-up)
$33.24
Professional Audio
Section
4
Spring Clip Mic Holder
Spring loaded mic clip will securely
hold a wide variety of microphone sizes
from 22mm~38mm (0.87"~1.5")
diameter. •5⁄8" x 27 thread brass insert
•Black color
Order #
35-2060
Two Channel Wireless
Microphone System
Order #
35-1860
Mfr. #
PDWM2300
(1-3)
$84.99
(4–up)
$77.25
(4–9)
$2.99
Microphone Stand with Die-Cast Base
High-quality mic stands are perfect for
all stage performance and studio applications.
Conventional cast iron base holds stand firmly
in place. •Adjustable height 33"~61" •Overall
weight: 9 lbs. •5⁄8" x 27 thread •Available in
black or chrome
(10–up)
$2.69
Order # Finish
(1-3)
35-2005 Black
$25.99
35-2006 Chrome 25.99
Standard Microphone Clip
•Three different sizes hold a variety of
microphone types •Each size has a 3mm
taper to match common mic shape •5⁄8" x
27 TPI brass insert •Black color
Order #
35-2065
35-2070
35-2075
Diameter
22mm (0.87")
25mm (1.0")
32mm (1.26")
(1–3)
$2.49
2.49
2.49
(4–9)
$2.25
2.25
2.25
Microphone Desk Stand
✔2 preset VHF channels
✔2 hand held microphones
✔Independent and mixed outputs
Low cost wireless mic system is ideal for close
range situations where two mics are needed. VHF
high band operation (160~250MHz) and super
heterodyne receiver ensure good performance
in karaoke and presentation situations. Mic channels
have independent level controls. Mics operate on standard
9V batteries (#292-035), two included, which typically
provide eight hours of operation. Specifications: •Range:
50' normal conditions, 100' max •Frequency response:
40Hz~15KHz •S/N ratio: 80dB •Receiver output: 1⁄4"
unbalanced 600ohm, 25mV (mic level) •Dimensions
(receiver): 21⁄4" (H) x 165⁄8" (W) x 91⁄2" (D) •Dimensions
(mics): 15⁄8" (dia.) x 10" (L) •Includes two 36" audio
cables, male 1⁄4" to male 1⁄4" •Power requirements:
110/220VAC switchable
Order #
35-1460
Mfr. #
PDWM2000
(1-3)
$71.99
(4-up)
$66.95
Folding Microphone
Stand with Boom Extension
✔Receiver acts as
drop in charger
✔2 preset VHF channels
✔2 hand held microphones
✔Single mixed outputs
Low cost wireless
mic system is ideal
for close range
situations where
two separate
microphones are needed. Each mic includes an internal
rechargeable battery pack, with the receiver acting as a
drop in charger. VHF operation (232.4~261.0MHz) and
super heterodyne receiver ensure good performance in
karaoke and presentation situations. Specifications:
•Range: 50' normal conditions, 100' max •Frequency
response: 50Hz~15KHz •Receiver output: Fixed level
balanced XLR, and variable level unbalanced 1⁄4" (mic
level) •Power requirements: 110/220VAC
Mfr. #
PDWM3000
Finish
Black
Chrome
(1–3)
$5.99
5.99
(4–9)
$5.49
5.49 (10–up)
$5.29
5.29
Microphone
Mounting Flange
Ideal for
permanently
mounting
#35-2035
#35-2036
microphones to
countertops, walls, tabletops, podiums and similar surfaces.
Perfect for use with flexible gooseneck extensions. •5⁄8" x
27 threads •Available in black or chrome •Mounting screws
not included
Order #
35-2035
35-2036
Finish
Black
Chrome
(1–3)
$2.99
2.99
Flexible
Microphone
Gooseneck
Extensions
(4–9)
$2.69
2.69 (1-3)
$94.99
(4-up)
$88.95
Follow us on:
Product Questions Email: tech@MCMelectronics.com
(1–3)
$2.99
2.99 4.49
4.49
5.79
5.79
•Allows low
impedance microphone
to be used with high
impedance equipment
•500ohm~50Kohm
Fig. Order #
A 35-590
B 35-595
(4–9)
$2.69
2.69 3.99
3.99
5.29
5.29
(10–up)
$2.39
2.39
3.59
3.59
4.69
4.69
A
Matching
Transformers
B
Type Female XLR to 1⁄4"
phone plug
Male XLR to 1⁄4" phone jack.
Order #
35-2010
35-2011
Finish
Black
Chrome
(1-3)
$29.99
29.99
(4-9)
$26.99
26.99
(10-up)
$25.49
25.49
Telescopic Boom Extension
#35-2045
Order # Length Finish
35-2040
6"
Black
35-2041
6"
Chrome
35-2045 13"
Black
35-2046 13"
Chrome 35-2050 19"
Black
35-2051 19"
Chrome
High-quality mic stands are
perfect for all stage performance
and studio applications. Included
31" counterweighted boom arm is
ideal for use with musical instruments.
Collapsible tripod legs weigh
considerably less and allow more
compact transport than conventional
solid base stands. •Adjustable height
37"~63" •Overall weight: 6 lbs. •5⁄8" x 27
thread •Available in black or chrome
(10–up)
$2.39
2.39
Use to extend
#35-2046
and add
flexibility to
any mic stand
or boom extension. Multiple units may be added together
for longer lengths. Ideal for use with flange mount
adapters. •5⁄8" x 27 threads •Available in black or chrome
Two Channel Wireless
Microphone System
Order #
35-1780
Order #
35-2025
35-2026
(10-up)
$21.25
21.25
(10–up)
$1.99
1.99
1.99
Perfect for conference and desktop
use. Cast iron base holds microphone
securely in place •Overall height: 4.3"
•Base diameter: 5" •5⁄8" x 27 threads
•Available in black or chrome
Two Channel Wireless Microphone System
(4-9)
$23.50
23.50
4
Low cost wireless mic system is ideal for close range
situations where two mics are needed. VHF high band
operation (232~261MHz) and super heterodyne receiver
ensure good performance in karaoke and presentation
situations. System includes a two–channel receiver, which
simultaneously accepts the signal from the two included
wireless microphones. Mic channels have independent
level controls. Mics operate on standard 9V batteries
(#292-035), two included, which typically provide eight
hours of operation. Features: •Detachable mic antennas
•Auto mute circuitry •Two color display shows signal
and AF level •XLR and 1⁄4" mixed output are provided
Specifications: •Range: 50' normal conditions,
100' max •110/220VAC operation
(1–3)
$3.29
(1-4)
$7.59
(5-9)
$6.83
6.59
5.89
Use with all standard mic stands
that utilize standard 5⁄8" x 27 TPI threads.
Counterweighted boom arm is ideal for
use with musical instruments. •Length is
adjustable from 33"~51" •Available in
black or chrome
Order # Finish (1–3) (4–9) (10–up)
35-2020 Black $14.99 $13.49 $12.79
35-2021 Chrome 14.99 13.49 12.79
Microphone Desk
Stand with Boom
Perfect for conference, desktop and
vocal performance use. Cast iron base
holds microphone securely in place.
Overall height is adjustable from
12"~17", counterweighted boom
arm is 17.7" •Overall weight 4.5 lbs.
•5⁄8" x 27 threads •Available in black
or chrome
Order # Finish (1–3) (4–9) (10–up)
35-2030 Black $24.99$22.50 $20.25
35-2031 Chrome24.99 22.50 20.25
MCMelectronics.com
Email: quotes@MCMelectronics.com
page
113
Section
4
Professional Audio
SRK Series Universal
Rack Stands
4
Tube Mic Preamp
with USB Output
Professional quality audio interface
allows connection of mic, instrument, and line level
signals to standard line level inputs as well as USB
computer inputs. Features: •USB output •Stackable
extruded aluminum chassis •Precision LED level metering
circuitry •Ultra low noise discrete microphone preamp
front end handles a wide range of input signal levels •High
impedance 1⁄4" instrument input •High-quality 12AX7A
tube •Switch selectable high-pass filter removes very low
frequency rumble and wind noise •48V phantom power is
available •Phase invert switch •Up to 70dB of gain •Fast
FET limiter to prevent overload •Switch selectable input
impedance •Variable input and output level controls
•Requires 10VAC, 700mA •AC adapter included
•Dimensions: 1.75" (H) x 5.9" (W) x 6.5" (D)
•Model #TUBE-MPPSUSB
Order #
555-8432
ONLY
$99.49
Rugged equipment
racks are solid steel and
feature fully enclosed side
panels. Available in four
sizes, these racks include
heavy-duty, 3" casters with
locking fronts, and one
single space blank panel.
The unique steel support
bar construction allows the
racks to be assembled to
accept either the European
or US thread sizes.
Following dimensions are
exterior, less casters. For overall height including
casters, add 4".
Order # Model # Rack Units
555-8580 SRK8
8RU
555-8581 SRK12
12RU
555-8582 SRK16
16RU
555-8583 SRK21
21RU
Dimensions
(H) x (W) x (D)
ONLY
16.5" x 20.0" x 18.1" $159.00
23.6" x 20.0" x 18.1" 179.00
30.7" x 20.0" x 18.1" 219.00
39.4" x 20.0" x 18.1" 249.00
TUBE-MP Microphone
Preamplifier
Considered the world’s
most popular external
microphone preamp,
the TUBE-MP utilizes
a hand picked 12AX7
preamplifier tube,
to add warmth and fatness to a signal while maintaining
exceptionally low noise and high quality. Designed for
use with a microphone, the TUBE-MP also functions as an
exceptional direct box, impedance matching, amplifying
and improving the sound of any device plugged into it.
Features: •48V Phantom power output •Phase reverse
•Variable input and output gain controls •Balanced XLR
and 1⁄4" inputs and outputs •Portable, all steel construction
Specifications: •Frequency response: 10Hz~20KHz
•Dynamic range: >100dB (20Hz ~ 20KHz) •THD: <0.1%
•Dimensions: 2" (H) x 5.5" (W) x 5" (D) •Power
requirements: 9VAC, AC adapter included
Order #
555-3160
ONLY
$49.99
Matching
Transformer
Order #
MP33028
(1-3)
$22.99
1
⁄4" mono plastic jack plug to
6.35mm mono plastic in-line
socket. Black straight cable.
6m length.
Order #
AR70890
page
114
(1-9)
$5.39
The simplest of
designs, these
knock down
economy racks
are scratch resistant black oak laminate over 5⁄8" MDF.
They provide a very economical, yet attractive means
for rack mounting audio gear in home studios or smaller
installations. Assembly hardware and 11 gauge steel rack
rail are provided. All models have a straight front. The
optional swivel base allows for 360° rotation of the racks
(for use with ER-8). •Dimensions: 201⁄2" (W) x 153⁄4" (D) x
see chart (H)
Order #
555-3951
555-3952
555-3953
555-3955
Mfr. #
ER-4
ER-8
ER-12
ER-20
Units
4
8
12
20
Height
87⁄8"
157⁄8"
227⁄8"
367⁄8"
(1-3)
$65.49
94.99
105.00
119.00
(4-up)
$60.35
85.95
99.95
112.00
Attractive smoked 3⁄16" plexi door is designed to fit all ER
series racks. Easily attachable door features a textured
powder coat finish and includes a keyed lock. Sizes
available for ER-8, ER-16 and ER-20.
Order #
555-3956
555-3958
555-3959
Mfr. #
ERD-8
ERD-16
ERD-20
(10-up)
$5.19
Rack Overall
Order # Mfr. # SpacesHeightDepth (1-2) (3-up)
555-3806 KAR-18-22 18
36" 22" $327.00 $315.00
555-3807 KAR-18-28 18
36" 28" 368.00 351.79
555-3808 KAR-24-22 24
47" 22" 367.00 353.00
555-3809 KAR-24-28 24
47" 28" 379.00 365.00
555-3810 KAR-35-22 35 66.25" 22" 385.00 369.00
555-3811 KAR-35-28 35 66.25" 28" 419.00 405.00
555-3812 KAR-44-22 44
82" 22" 447.00 429.00
555-3813 KAR-44-28 44
82" 28" 479.00 465.00
KAR Series
Enclosure Doors
Available for all 18, 24, 35
and 44 space KAR Series
racks, these doors are
constructed from 16 gauge
steel. Finished in black
powder coat, they are
available with solid or
smoked Plexiglass.
Key lock is included.
Rack
Order # Mfr. #
Spaces Style
(1-3)
555-3854 KARD-18
18 Solid $105.00
555-3855 KARD-18P 18 Perforated 155.00
555-3856 KARD-18PLX 18 Plexiglas 215.00
555-3857 KARD-24
24 Solid
125.00
555-3858 KARD-24P 24 Perforated 175.00
555-3859 KARD-24PLX 24 Plexiglass 255.00
555-3860 KARD-35
35 Solid
129.49
555-3861 KARD-35P 35 Perforated 199.00
555-3862 KARD-35PLX 35 Plexiglas 369.00
555-3863 KARD-44
44 Solid
169.00
555-3864 KARD-44P 44 Perforated 245.00
555-3865 KARD-44PLX 44 Plexiglas 435.00
(4-up)
$99.95
149.00
205.00
119.00
169.00
149.00
116.49
195.00
359.00
159.00
235.00
419.00
Compatible Rack (1-2)
(3-up)
555-3952, ER-8 $66.99 $62.00
555-3954, ER-16 115.00 109.00
555-3955, ER-20 139.00 135.00
Open Frame Steel Relay Racks
Heavy–duty steel 19" racks are ideal
for installations where low cost and
easy access to equipment is a priority.
Available in 24, 35 and 42 rack unit
configurations, these are ideal in
most telecom, security and other
applications, using light to moderate
components, with total weight of up
to 145 lbs. Units are black powder
coated, and include 50 rack screws
with captive washers. Rails are tapped
for 10-32 screws. Overall depth is 5",
base depth is 17". Overall height: 36"
Security Door for
ER Series Racks
(4-up)
$20.59
Microphone
Extension Cable
Heavy-duty 16 gauge rack features
cold rolled steel, welded construction
and a black powder coat finish. These
fully enclosed racks are available in
outside depths of 22" and 28",
accommodating equipment up to 20"
and 25" respectively. The optional
front and rear locking doors are
removable for left or right swing. A
removable 5.25" x 19" solid roof insert
allows interchangeable panels for fans or
passive cooling. Note: Due to their large size, these
items are drop shipped, via freight carrier, directly
from the manufacturer.
ER Series
Economy
Racks
Plexi Door for ER Series Racks
Allows use of
balanced signal sources
on unbalanced inputs.
May be used with
microphone or line level
sources. 51⁄2" cable lead
and spring strain relief reduces stress on mixing board or
amplifier input. Fully metal transformer housing and 1⁄4"
connector provide good shielding to ensure low-noise
operation. Slide switch selects high or low impedance,
balanced XLR input, 1⁄4" unbalanced 600ohm output.
Specifications: •Frequency response: 50Hz~15KHz
•Overall length: 12"
KAR Series
Enclosed
Audio Racks
Solid 16 gauge security door
is designed to fit all ER series
racks, or provide added security
on any commercial rack. Easily
attachable door features a black
powder coat finish and includes a two
keyed locks. Sizes available for ER-12, ER-16 and ER-20.
Order #
555-3967
555-3968
555-3969
Mfr. #
SCDR-12
SCDR-16
SCDR-20
Compatible Rack (1-2) (3-up)
555-3953, ER-12 $69.99 $66.95
555-3954, ER-16 74.99 71.79
555-3955, ER-20 82.99 79.49
1-800-543-4330
Fax: 1-800-765-6960
Order #
555-2665
555-2666
555-2667
Mfr. #
RFM-24
RFM-35
RFM-42
NET 30
Terms
Customer Service: 1-877-626-3532
Height 24 space
35 space
42 space
(1–3)
$139.00
154.00
159.00
(4–up)
$135.00
148.00
154.00
Professional Audio
NEW!
Rack Mount Eight Outlet
Power Strips
#555-10555
#555-10556
#555-10557
Pro Series Rack Mount
Nine Outlet Power Strip
and Power Conditioner
Order #
555-10555
555-10556
555-10557
Description
9 outlet
9 outlet with pull out lights and voltage monitor
9 outlet with pull out lights,
voltage and current monitor
ONLY
$85.49
145.00
155.00
Order #
555-6470
555-6471
Outlet Type
Rear
Front
(3-up)
$58.29
52.97
Rack Mount Power Panel
Rugged outlet strips provide convenient switched and
unswitched AC outlets in a 1RU height unit rack mount
device. A 15A circuit breaker and rocker switch are
located on the front panel, for easy access. The 6' power
cord comes factory installed, however a removable panel
and instructions are provided in the event the unit is to
be hard–wired with conduit for permanent installation.
Features: •One front mounted unswitched AC outlet
•Two rear mounted unswitched AC outlets •Six rear
mounted switched AC outlets •Limited quantities
Order
555-7335
NEW!
(1-2)
$59.99
53.99
Model #
ACRL-191B
ONLY
$49.99
#555-10550
Flat Pack
Enclosed
19" Rack System
Built with heavy-duty
16 gauge steel, these
rack systems from
Penn Fabrication help
keep your equipment
organized and secure,
while providing a
professional look
for any application.
Optional doors
include lock to
prevent theft and
NEW!
tampering of your
expensive equipment.
Note: Door and casters sold separately.
Order #
Mfr. #
Racks
555-10400
R8500-12
555-10401
R8500-16
555-10402
R8500-24
Glass Doors
555-10410
R8450-12
555-10411
R8450-16
555-10412
R8450-24
Steel Vented Doors
555-10420
R8460-12
555-10421
R8460-16
555-10422
R8460-24
Casters
555-10430
R8480
#555-10552
Rack Mount Eight
Outlet Power Strip
ART’s 4 x 4 series outlet strips feature four outlets spaced
1.25" a part allowing you to plug in wide power cables
and AC adapters, along with four regularly spaced outlets.
Features: •Surge and spike protection •RFI and EMI
filtering •6' power cord •15A circuit breaker •1800W
power capacity
Description
8 outlet
8 outlet with pull out lights and voltage monitor
8 outlet with pull out lights,
voltage and current monitor
ONLY
$49.49
99.49
109.00
Unique design provides
maximum rack storage in
minimum vertical space. Ideal
for DJs or other portable sound
applications when 19" rack
mixers are utilized. Removable
top cover exposes the top
section, intended for a mixer.
This section folds flat for
transport, and may be angled
at one of eight positions, from
0~45°, while in use. Removal of the
front cover exposes the vertical section which is
ideal for amplifiers, source equipment or sound
processors. The entire enclosure is covered with durable
gray carpet, with nickel plated corner protectors, and
matches most DJ equipment. Recessed handles allow
easy carrying and storage. Ten rack spaces in bottom
section and six rack spaces on top. Mfr. #CR-10/6R.
Order #
555-2675
(1–2)
$269.00
(3–up)
$249.36
CyberPower
Systems
rackmount
outlet and surge
protection strips
provide additional outlets for your rackmount power
needs. The strips are available in 15A or 20A versions
with or without surge protection. The units fit standard
19" rack and occupies 1U of rack space.
Amp
15
15
20
20
Surge ONLY
N
$41.99
Y
49.99
N
49.99
Y
59.99
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Floor Rack
System
ONLY
12
16
24
$225.00
249.00
279.00
12
16
24
195.00
209.00
229.00
12
16
24
139.00
149.00
159.00
--
19.99
#50-9490
•A turnkey system
for managing components and
is the first affordable and fully
assembled floor rack in its class
•Standard 19" rack enclosure
•Caster base provides easy
placement inside closets or
against walls •Integrated cable
management for routing 3"
#50-9420
bundles •Ships fully assembled •Black
with silver handles RSF specifications: •30 rack spaces
•Four 2U space shelves with 50 lbs. (22.7 kg) per shelf
maximum weight capacity •One 5U space shelf with
100 lbs. (45.4 kg) maximum weight capacity •Five 2U
space vented blanks •Five cable lacing bars RSF.5
specifications: •16 rack spaces •Three 2U space shelves
with 50 lbs. (22.7 kg) per shelf maximum weight capacity
•Three 2U space vented blanks
Order #
50-9420
50-9490
50-9422
50-9424
50-9426
Rackmount
Outlet Strips
Order # Mfr. #
Outlets
28-10515 CP1215RM
10
28-10520 CP1215RMS
10
28-10525 CP1220RM
10
28-10530 CP1220RMS
10
Rack Spaces
Converta Racks™
#555-10551
Order #
555-10550
555-10551
555-10552
4
4
ART’s 4 x 4 Pro series outlet strips feature four outlets
spaced 1.25" a part allowing you to plug in wide power
cables and AC adapters, four regularly spaced outlets,
nd one un-switched front mounted outlet. Each outlet
strip includes an internal discrete module called APF™
(advanced power filtering) which filters out digital and
dimmer hash as well as any high-frequency noise that
is above the audio range. Features: •Surge and spike
protection •RFI and EMI filtering •6' power cord
•15A circuit breaker •1800W power capacity
15A outlet
strips are designed for easy
installation into racks, providing your
choice of front or rear access. Features: •MOV surge
protection •Front panel circuit breaker •Illuminated
rocker on/off switch •Black steel housing •15' black
14/3 power cord •Overall dimensions: 1.75" (H) x
2.37" (D) x 19.0" (W) •UL and CSA listed
Section
Mfr. #
RSF
RSF.5
RSVS-2U
RSVS-5U
RSVB
Description
ONLY
Preassembled floor rack $699.00
Preassembled half
549.00
2U vented shelf
54.99
5U vented shelf
79.99
2U vented blank
19.99
Wall Mount Rack with Locking Door
A compact wall mount enclosure perfect for smaller audio applications. Constructed
of 16 gauge cold rolled steel, this seven space rack is equipped with 11 gauge
threaded rack rail. Conduit knockouts are located on both top and bottom of the
unit and the sides are slotted for passive cooling. Four keyhole slots on the rear panel
allow for secure attachment to walls and allow the rack to be mounted so that the front
locking door can swing from the left or right. Front door is 1.5" deep. Finished in
black powder coat. Dimensions: 15.5" (H) x 22.25" (W) x 16.75" (D). Mfr. #WMK-7.
Order #
555-3825
(1-3)
$179.00
MCMelectronics.com
Email: quotes@MCMelectronics.com
(4-up)
$174.00
page
115
Professional Audio
Section
4
Rack Mount Shelf
•Standard mount shelves
are 19" wide to fit into
conventional racks
4
Locking Rack Drawers
Powder coated steel
drawer fits standard
19" racks and is
available in 2RU
through 5RU sizes.
Perfect when items such
as tools, CDs, cables or
microphones must be securely
stored with an equipment rack.
External depth on all drawers is 14.5".
Order #
Height Height (1-3)
Rack
Internal
555-9000
555-9001
555-9002
555-9003
2RU
3RU
4RU
5RU
2.87"
4.61"
6.35"
8.11"
$55.99
63.99
70.99
78.99
(4-9)
(10-up)
$54.55
61.95
68.95
75.95
$50.35
57.95
63.95
70.95
Heavy-Duty
Sliding Rack Door
Heavy-duty sliding
rack drawer; two
or four spaces.
New cabinet grade
14" full extension
sliders provide
smooth action.
Includes larger flush mount latch
and 13 gauge drawer font. Black textured enamel finish.
Order #
555-4001
555-4003
Mfr. #
SDR-2
SDR-4
Spaces
2
4
(1-3)
$105.00
119.00
Sliding Rack Tray
Rack shelf is ideal for mounting equipment that requires
easy access to the rear. Multiple equipment fixing points
allow secure attachment to shelf. Ball bearing slides
provide smooth operation •Supports up to 42 lbs. •Shelf
slides adjust from 14.5"~22.0" •Overall shelf depth:
15.96" •Occupies one rack space •Black color
Order #
50-1677 ONLY
$59.99
Sliding Rack Shelf
For supporting
equipment up to 35 lbs. Ears
attached to the rear frame allowing unit to
be secured to the back of any enclosed rack. 12"sliders
with nylon roller bearings allow for a smooth sliding
movement. Sliders provide positive lockout, for the black
laminated wood shelf. Dimensions: 13⁄4" (H) x 151⁄2" (D) x
133⁄4" (W). Mfr. #SLE-1.
Order #
555-3972
(1-3)
$67.99
Mfr. #
ESD-2 ESD-3 ESD-4 Spaces
2
3
4
(1-3)
$91.49 93.99 109.00 Heavy-Duty
Sliding
Rack Shelves
Locking Security Cover
Order #
555-4023
555-14025
555-4027
Mfr. # Space
LSC-2
2
LSCP-2
2
LSCP-8
8
Panel
Steel
Plexi
Plexi
Heavy-duty shelves are 14
gauge steel and finished in black
baked enamel. Extra heavy-duty ball bearing sliders
extends a full 14" for usable surface area of 16" wide
and 14" deep. Sliders equipped with a positive lockout
mechanism that stops in two positions. Rear rack rail
provided. Capacity: 60 lbs. Dimensions: 171⁄2" (W) x
31⁄2" (H) x 141⁄2" (D). Mfr. #SLS-1.5.
Order #
555-3974
(1-3) (4-up)
$33.99 $32.59
41.99 40.39
66.99 64.09
For high security applications, these
security torx head screws require a
special driver for removal. Standard
10–32 x 3⁄4" length screw is compatible
with standard rack rails. Washers included. 100 screws
and washers per bag.
page
116
Mfr. #
PNTX-100
(1–3 bags)
$18.99
(4 bags–up)
$17.95
Universal Rack Shelf
Available in one, two or
three space versions, this
universal rack shelf allows
mounting of otherwise nonrackmountable equipment. Features:
•Heavy-duty, 16 gauge cold rolled steel •One
piece construction •Black baked enamel finish
Dimensions
Order # Mfr. # (H) x (D) Capacity (1-3) (4-up)
555-3979 UTS-1 1 3⁄4" x 11" 30 lbs. $29.99 $28.25
555-3980 UTS-2 3 1⁄2" x 14 1⁄2" 50 lbs. 37.99 36.50
555-3981 UTS-3 5 1⁄4" x 14 1⁄2" 80 lbs. 41.99 39.75
This versatile shelf
is constructed of 16 gauge cold,
rolled steel and is finished in durable black enamel.
Comes complete with two fully adjustable hold down
bars that “trap” equipment. Bars are padded to protect the
finish on your gear. Returns on the front and rear edges of
the shelf provide additional lateral strength.
Dimensions
Order #
Mfr. # (W) x (H) x (D)
555-3976 TR-3 171⁄4" x 51⁄4" x 141⁄2"
555-3977 TR-4
171⁄4" x 7" x 141⁄2"
(1-3)
(4-up)
$51.99 $49.88
55.99 53.95
(4-up)
$99.50
Universal Rack Shelf
Rack Shelf
Secured storage of
otherwise loose
equipment, tools,
tapes, CDs, papers and other
personal items. All steel construction with flush
mount latch and key lock. Perfect for any audio rack in
the studio, on the road or at the installation. Black baked
enamel finish. Mfr. #RKV-3.
Order #
555-3999
Pin Torx Screws
Order #
555-4078
(1-3)
$102.00
(4-up)
$88.17
89.95
105.00
Security Covers available in two
and eight space versions to provide
the ultimate in security for your rackmounted
devices. Heavy gauge steel frame construction, with
either a black steel or see-through plexi front panel.
(50-up)
$20.94
25.14
26.95
Trap Rack
Shelves
Sliding Drawer
Order #
555-3987
555-3988
555-3989
(10-49)
$21.99
27.24
29.95
(4-up)
$64.75
(4-up)
$99.95
115.00
Available in two, three or
four space versions, these
sliding drawers feature
fully enclosed
construction, and
16 gauge steel with
a black semi-gloss
finish. 12" cabinet
grade slides allow for
full extension. Perfect for anything
from pencils, papers and strings to
cassettes, CDs and tools.
Rack
Order # Spaces Height Depth (1-9)
50-1720 1 13⁄4" 103⁄4" $23.49
50-1725 2 31⁄2" 141⁄2" 28.49
50-1727 3
53⁄4 141⁄2" 31.99
Dimensions
(W) x (H) x (L)
9" x 5" x 17"
(1-3)
$63.99
•51⁄2" deep
Rack
Order # Mfr. #
Spaces Height (1-9) (10-49)(50-up)
50-1705 R1206/3U
3
51⁄4" $6.19 $6.03 $5.79
50-1710 R1206/2U
2
31⁄2" 5.19 4.95 4.60
50-1715 R1206/1U
1
13⁄4" 4.50 4.40 3.92
Fax: 1-800-765-6960
Order #
555-3978
(1-3)
$19.99
(4-up)
$19.25
(4-up)
$60.95
Rack Mounting Bracket
(Rack Ear)
1-800-543-4330
Single space 14 gauge steel rack
shelf features a punched bottom to
accommodate mounting of a variety of half
rack devices. Includes two each 6⁄32", 8⁄32" and 10⁄32"
machine screws. Black baked enamel finish. Dimensions:
1 3⁄4" (H) x 10" (D). Mfr. #UNS-1.
Utility Vented
Rack Shelf
This 16 gauge steel shelf,
finished in black powder coat will handle
up to 60 lbs. of equipment. It occupies three rack
spaces and is 17" deep. Slotted bottom allows for
ventilation and slotted rear return for cable management.
Mfr. #NTVS-3.
Order #
555-3982
NET 30
Terms
Customer Service: 1-877-626-3532
(1-2)
$54.49
(3-up)
$49.95
Professional Audio
Rack Panel
Blanks with U
Shaped Edge
419" width
Rack
Order # Mfr. #
Spaces Height (1-9) (10-49) (50-up)
50-1680 R1268/1UK 1 13⁄4" $11.99 $11.22 $10.49
50-1685 R1268/2UK 2 31⁄2" 12.99 12.39 11.79
50-1690 R1268/3UK 3 51⁄4" 13.99 13.19 12.39
50-1692 R1268/4UK 4
7" 18.49 17.47 15.79
Ideal for covering unused rack spaces, these blank panels
may also be drilled or cut for custom applications. Black
powder coated steel is 0.078" (2mm) thick.
Rack Order # Spaces Height
50-1681 One
1.75"
50-1686 Two
3.50"
50-1691 Three 5.25"
50-1693 Four 7.00"
Hole Centers (1–3) (4–9) (10–up)
1.25"
$4.49 $4.19 $3.79
3.00"
6.79 6.18 5.55
2.25"
11.49 10.25 9.25
4.00"
12.99 11.69 10.59
Security covers help
prevent tampering.
16 gauge perforated
steel has one piece
construction to avoid
the use of welded-on
ears. 1" offset
equipment knobs.
Neoprene for screws
allow removal of cover without removing gear. Available
in one, two or three space versions. Black baked enamel
finish. The PSC Series has 1⁄16" holes, which allow
partially obstructed view. The SEC Series has 5⁄32" holes,
allowing an almost perfect view of the protected item.
Order #
555-4034
555-14035
555-4036
555-4044
555-14045
555-4046
These ventilated flat panels include a 0.43" top and
bottom lip for added strength and more contoured
appearance when butted up against shelves and trays.
Ideal for covering unused rack spaces. Black powder
coated steel is 0.047" (1.2mm) thick.
(4–9)
$7.09
12.53
13.05
14.31
(1-3)
$19.99
21.49
23.99
50.99
21.49
23.99
(10–up)
$6.45
11.55
12.01
13.17
Mfr. #
SFT-1
SFT-2
Spaces
1
2
(1-3)
$5.59
7.49
(4-up)
$5.39
7.01
For passive cooling of racks, 104 aluminum. Black
powder coated with brushed black anodized finish.
One, two or three space.
Order #
555-4059
555-14060
555-4061
Mfr. #
VPL-1
VPL-2
VPL-3
(1-3)
$11.49
13.49
14.99
(4-up)
$10.79
12.89
14.49
Perforated Vent Panels
One piece 16 gauge construction is finished in
black baked enamel. Available in one and three space
configurations, PVP series panels allow for optimum
air circulation with 5⁄32" perforations.
Mfr. #
PVP-1
PVP-3
Spaces
1
3
(1-3)
$9.69
13.99
(4-up)
$9.29
13.49
Perforated
Security Panels
Rack Order # SpacesHeight
50-1721One 1.75"
50-1726Two 3.50"
50-1731Three 5.25"
Hole
Centers
1.25"
3.00"
2.25"
(1–3)
$17.49
23.49
28.99
(4–9) (10–up)
$16.05 $14.22
21.95 20.25
26.78 23.73
Tie Bar Strips
Tie bar lancer strips are easily attached to front or rear
rack rails to allow easy, professional looking cable
management. Multiple slotted holes allow easy tie-down
of large cable bundles, with multiple breakout points,
using standard nylon wire ties. Intended for horizontal
rack mounting, each strip is 19" long. Available
individually or in ten piece value pack.
Order #
555-9020
555-9025
Model #
TBL
TBL-VP
Description
Individual
Ten pack
ONLY
$2.69
23.99
Follow us on:
Product Questions Email: tech@MCMelectronics.com
The perfect choice for
communication and datacomm
equipment. Self squaring
design assembles easily and is
constructed of heavy duty steel
rack rail. Rail is tapped for
the included 50 rack screws
(10-32). Finished in black
powder coat, 18" deep.
Rack Order # Mfr. #
Spaces
555-3906 RWM-13-18 13
555-3907 RWM-24-18 24
Total
Height (1-3) (4-up)
261⁄4" $125.00 $119.00
451⁄2" 139.00 135.00
Steel Flat Panel
Order #
555-4037
555-4039
Security panels may be mounted directly over the front
of existing rack equipment and provide protection from
tampering with controls and settings. Perforated front
allows ventilation and a partially obstructed view of
equipment. 1" offset allows space for equipment
controls. Single piece stamped black powder
coated steel is 0.047" (1.2mm) thick.
Wall Mount Relay Racks
(4-up)
$18.89
20.49
22.79
19.85
20.49
22.79
Vent Panel
Blank “U”
Rack Panels
(1–3)
$7.99
13.99
14.99
15.99
Spaces
1
2
3
1
2
3
Sturdy 14 gauge cold rolled steel. One and two spaces.
Order #
555-14055
555-4056
Order #
Rack Spaces
50-1684 One
50-1689
Two
50-1651
Three
50-1696
Four
Mfr. #
PSC-1
PSC-2
PSC-3
SEC-1
SEC-2
SEC-3
4
Specialty Connector Panels
Dual Gooseneck Lamp
Single rack space lamp assembly is perfect for rack
locations requiring additional light. Unit includes
a rotary dimmer control and requires 12VDC, AC
adapter included. Black color.
Order #
555-120
MSRP
$79.00
(4-up)
$37.95
Rack Panel for
Ventilation Fans
•19" width
Order #
50-1665
50-1670
Mfr. #
G1701
G1702
No. of Fans (1-9)
1
$17.99
2
16.49
(10-49)
$17.00
15.89
110VAC Cooling Fan
•Specifically designed for use
with rack fan panels #50-1665
and 50-1670 •Cast alloy frame,
ABS plastic blades •Measures
4.72" (H) x 4.72" (W) x 1.06"
(D) •Requires 110VAC, 60Hz
•Square mounting hole pattern
on 4.13" centers •Mfr. #8700/Fancord
Order #
50-1672
16 gauge cold rolled steel side
panels are flanged for added
strength. They are punched to
accommodate popular
configurations of XLR type and 1⁄4"
connectors. All panels are single
rack height. Finished in black
powder coat.
(1-3)
$39.99
(1-3)
$31.99
(4-9)
$29.95
(10-up)
$26.95
Rack Rail
•#10 x 32" holes •.098
steel •Standard rack .5"
and .625" O.C. alignment •79" length •Mfr. #R0821
Order # Mfr. # Description (1-3) (4-up)
555-14040 S12F Holds 12 female XLRs $9.99 $9.69
555-4041 S12H Holds 6 female and 6 9.99 9.59
male XLSs
1
555-4043 S16.25 Holds 16 female ⁄4" jacks 9.99 9.59
Order #
50-1675
(1-9)
$22.99
(10-49)
$21.99
(50-up)
$19.89
Cable Depot
16 gauge steel cable reorganizer
keeps cabling off the floor, out of
the way and kink-free. Fourteen
fingers extend to hold up to forty
cables. Maximum cable diameter
is 1⁄4”. Mfr. #CBLD.
Rack Panel for Four EP
and Eight XLR Connectors
•Two rack spaces •19"
width •Mfr. #R1273/2UK
Order #
50-1695
(1-9)
$15.99
(10-49)
$14.95
(50-up)
$14.01
Order #
555-4065
MCMelectronics.com
Email: quotes@MCMelectronics.com
(1-2)
$12.99
(3-up)
$11.89
page
117
4
Flat Steel Blank
Rack Panels
Perforated Steel
Security Cover
Section
Professional Audio
Section
4
Pin Spot Lamps
4
Fixed
Open Rack Shelves
16 gauge steel shelves
fit in standard 19" width
panel spaces, and are flanged for added strength. Each
supports up to 150 lbs. and include all mounting brackets
and hardware. Available in 15" and 20" depths, in
ventilated and non-ventilated versions, each requires
5.25" (3 rack units) height. Metallic gray finish.
Order # 555-6480
555-6481
555-6482
555-6483
Shelf
Depth
15.0"
15.0"
20.0"
20.0"
Type
(1-2)
Non-ventilated $62.99
Ventilated
72.99
Non-ventilated 74.99
Ventilated
85.99
(3-up)
$61.45
71.95
73.50
84.95
Stationery
Shelves
Stationery
shelves fit
standard 19" wide panel spaces and four cabinet depths.
Shelves are single piece, 16 gauge steel, with front and
rear flanges for support capacity of up to 200 lbs. Each
includes all necessary mounting hardware, but require
two pairs of panel mounting rails per cabinet rack.
Smooth black finish.
Order #
Shelf Depth
Type
555-6484
14.25"
Ventilated
12' Rope Lights
Perfect as accent or effects lighting
for nightclubs, windows, or mobile DJ
applications. These 12' light ropes are available in clear,
red, blue or multi-color versions. Each rope has lights
wired to four individual channels, allowing the separately
available controller to display forward and reverse chase,
with variable speed, or all on. Rope lights may be directly
plugged into AC power, in the all-on mode, with the
separately available AC cord (#555-3407). Multiple
rope lights may be connected together end-to-end
or 16' extensions.
Order #
555-3390
555-3392
555-3394
555-3406
555-3407
Mfr. #
RL-11
RL-14
RL-16
RLX
SC
Description
Clear rope light
Blue rope light
Multi-color rope light
Rope light 16’ extension
Rope light AC cord
ONLY
$22.49
18.49
18.49
12.49
9.99
(1-2)
(3-up)
$60.99 $59.50
Rope Light
Controller
Rack Screws and Washers
10-32 x 3⁄4" length black oxide philips
truss head screws include #10 nylon
washers to prevent scratching equipment.
50 per package. Mfr. #PTSW-50.
Order #
555-4082
(1-2 pkgs.)
$7.99
(3 pkgs.-up)
$7.39
Four channel
controller provides
steady chase, sound activated chase, flash, all–on, and 16
pattern auto modes. Includes single rope light output, plus
four AC outlets for use with other incandescent and PAR
lamps. 1200W total capacity. Dimensions: 2.5" (H) x
7.5" (W) x 4.5" (D). Includes hanging bracket.
Mfr. #RLC-737+.
Order #
555-2515
(1–3)
$61.99
Rack Rail Screws
and Washers
•Black finished screw 10 x 3⁄4"
Black nylon washer 3⁄16" (I.D.),
3
⁄8" (O.D.) washers •24 of each per package
•Mfr.#HU5205/5215 24
Order #
50-1855
(1-9 pkgs.) $4.79 (10-49 pkgs.)
$4.15
(50 pkgs.-up)
$3.49
A
“C” Clamps
For mounting Par
lamps, pin spots and
effect lighting. Use
the standard clamp
B
(#555-3412), for pin
C
spot lamps, the medium
clamp (#555-3411) for
Par lamps, and the heavy duty clamp (#555-3410) for
effect lighting.
Fig.
A
B
C
Order #
555-3410
555-3411
555-3412
page
118
Description
Heavy-duty
Medium-duty
Standard
ONLY
$11.49
5.04
4.09
(4–up)
$55.69
Mirror Balls
and Motors
No light show is complete
without a mirror ball. To
heighten the event, these
mirror balls feature glass
mirror tiles that are smaller
in size than those commonly
used today. They offer
an increased number
of reflective tiles
for a more dazzling and
more colorful lighting
effect than other balls of equal size. The smaller tiles
are resistant to cracking. Available in 8", 12" and 16"
diameters. Then choose between battery powered or AC
powered mirror ball motors. The DC powered BM-4 is
perfect for mobile applications and handles mirror balls
up to 12". The AC powered MBM-1A motor will handle
all balls up to 20" and larger. The AC model is UL and
CUL listed.
Order #
555-3345
555-3346
555-3347
555-3280
555-3350
Mfr. #
MB-12
MB-16
MB-8
BM-4
MBM-1A
Description
12" mirror ball
16" mirror ball
8" mirror ball
DC powered motor
AC powered motor
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$30.49
50.49
15.49
10.49
16.99
Among the most
popular of all
effects lighting,
pinspots are versatile and
reliable fixtures that can be used
in conjunction with chasing and
dimming controllers to achieve
a wide range of dazzling effects
without major expense. Pinspots
provide a narrow, focused beam
perfect for accent lighting and
chasing applications. They are commonly used in
conjunction with mirror balls. The PS-3 pin spot has
a fire retardant plastic housing with an attached 6'
grounded cord and fuse. The PS-4 has a metal housing
with heavy duty 6' grounded cord and fuse. Compatible
with all Par 36 type bulbs. Note: Bulb not included.
Order #
555-3370
555-3380
Description
PS-4 pin spot
Par 36 bulb
ONLY
$22.49
6.05
Par 56 Lamps
Among the most
popular of all effects
lighting, Par cans are the most
versatile and reliable fixtures
you can buy. When used in
conjunction with chasing and
dimming controllers, you can
achieve a wide range of dazzling
effects without major expense. They include heavy-duty
adjustable mounting brackets and lamp sockets with
grounded power cord. Use with wide beam or narrow
beam lamps for spotlight applications. Features:
•Shielded vent holes to prevent light leakage •Heavy-duty
grounded cord •Gel holder and frames •Hinged rear cover
with latch •Spring hinge •UL listed •Made in USA
•Dimensions: 7.5" (H) x 7.5" (W) x 13" (D) •For use with
300~500W incandescent Par lamps •Black aluminum
finish •Mfr. #V-56AB •Note: Bulbs not included
Order #
555-3450
ONLY
$40.49
PAR 38
Lamps
These rugged
lamp housings
are designed to accommodate
75~300 watt PAR 38 size
bulbs. Features include:
•Black or silver available
finish •Compatibility with
wide and narrow beam lamps
•Included heavy-duty
adjustable mounting bracket
•Three prong grounded cord •UL listed •Gel holder
•Ventilation holes for cooling •Hinged rear cover with
latch •Made in USA •Dimensions: 7.5" (dia.) x 9.5" (L).
Mfr. #V-38. •Note: Bulb not included
Order #
Description
555-2595
Silver lamp
555-2596
Black lamp
90 Watt Par 38 Bulbs
555-2598
Flood
(1–3)
$19.99
17.99
(4–up)
$18.33
16.74
7.99
7.19
Par 36 Lamp Color Lenses
To help add a splash of color to your par and pinspot
fixtures, we offer a complete assortment of color lenses.
These molded plastic lenses are curved to produce rich,
vibrant color from edge to edge and feature high
temperature construction for long life. They are
available in red, blue and green. Mfr. #CL-36.
Order #
555-3291
555-3292
555-3296
Color
Blue
Green
Red
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$1.45
1.49
1.22