Buffalo Tech WLI-UC-GN User manual

User Manual
Wireless N High Power USB 2.0 Adapter
WLI-UC-GNHP
www.buffalotech.com
35010984 ver.02
Contents
Chapter 1 Product Overview............................................ 4
Features................................................................................... 4
150 Mbps High Speed Mode.................................................... 4
System Requirements.............................................................. 5
Package Contents.................................................................... 5
Hardware Overview.................................................................. 5
Chapter 2 Installation........................................................6
Installing Wireless Drivers........................................................ 6
Installing Client Manager Utility................................................ 10
Chapter 3 Connect to a Wireless Network...................... 13
Automatic Secure Setup (AOSS/WPS).................................... 13
Windows Vista (Client Manager V)................................................. 14
Windows XP (Client Manager 3)..................................................... 15
Automatic Secure Setup (WPS PIN)........................................ 16
Windows Vista (Client Manager V)................................................. 16
Windows XP (Client Manager 3)..................................................... 20
Manual Setup (Client Manager)............................................... 22
Windows Vista (Client Manager V)................................................. 22
Windows XP (Client Manager 3)..................................................... 25
Manual Setup (Windows Utility)............................................... 26
Windows Vista (WLAN AutoConfig)................................................ 26
Windows XP (Wireless Zero Configuration).................................... 29
WLI-UC-GNHP User Manual
1
Chapter 4 Client Manager................................................. 30
Software Overview................................................................... 30
Using Client Manager V with Windows Vista........................... 30
Opening and Closing Client Manager............................................. 30
Main Screen.................................................................................... 31
Automatic Secure Setup and Advanced Setup............................... 32
SSID / WPS-PIN selection.............................................................. 33
Searching Wireless Access Points.................................................. 34
Wireless Network Information......................................................... 35
WPS-PBC / AOSS selection........................................................... 36
Wireless Status............................................................................... 37
Wireless LAN Diagnostics............................................................... 39
Profile List....................................................................................... 40
Extended Properties (Wireless)...................................................... 41
Extended Properties (Network)....................................................... 42
Extended Properties (Browser)....................................................... 43
Extended Properties (Printers)........................................................ 44
Using Client Manager 3 with Windows XP............................... 45
Opening and Closing Client Manager............................................. 45
Status.............................................................................................. 46
Scan................................................................................................ 48
Connect........................................................................................... 49
Profiles............................................................................................ 50
Profile Information (Basic)............................................................... 51
Profile Information (Network).......................................................... 53
Profile Information (Browser).......................................................... 54
Profile Information (Printers)........................................................... 55
System Tray Menu.......................................................................... 56
Option Menu................................................................................... 57
WLI-UC-GNHP User Manual
2
Chapter 5 Trouble Shooting............................................. 59
The Computer does not recognize the WLI-UC-GNHP Wireless
Adapter..................................................................................... 59
Cannot connect to the network wirelessly................................ 59
You forgot SSID, Encryption KEY, or Password....................... 59
Other Tips................................................................................. 60
Appendix
. .................................................................... 63
150 Mbps Mode settings.......................................................... 63
Specifications........................................................................... 64
Removing the device from the computer................................. 65
Uninstalling the Software......................................................... 65
Uninstalling the Drivers............................................................ 65
TCP/IP Settings........................................................................ 66
Antenna.................................................................................... 67
Compliance Information........................................................... 68
Environmental Information....................................................... 75
Warranty Information................................................................ 76
Contact Information (USA / Canada)........................................ 77
Contact Information (Europe)................................................... 78
WLI-UC-GNHP User Manual
3
Chapter 1
Product Overview
Features
This product supports 2.4 GHz SISO-OFDM/OFDM and 2.4 GHz DS-SS transfer methods and works
with IEEE 802.11n and IEEE 802.11b/g wireless devices. Data transmission rates of up to 150 Mbps
are available. It also includes support for AOSS (AirStation One-touch Secure System) and WPS (Wi-Fi
Protected Setup), making connection with wireless devices easier.
The AirStation supports the following wireless encryption modes:
• WPA-PSK (TKIP/AES)
• WPA2-PSK (TKIP/AES)
• WEP (128/64bit)
The movable antenna is adjustable for best performance.
150 Mbps High Speed Mode
150 Mbps is the link speed when using Wireless-N mode. It represents actual wireless data speeds,
including overhead. Because the overhead is not available for user data transfer, usable wireless
throughput will be substantially slower.
WLI-UC-GNHP User Manual
4
Chapter 1 Product Overview
System Requirements
This product is designed for use with PCs running the 32 bit versions of Windows Vista or Windows
XP. A USB 2.0 port is required. Either a CD-ROM drive or an internet connection is recommended.
This product does not support computers equipped with dual processors (computers with 2
physical CPUs). Computers with dual core CPUs are supported.
Compatible operating systems:
Windows Vista (32bit)*
Windows XP (32 bit) (with Service Pack 2 or later)*
*Standby mode is not supported.
Package Contents
The following items are included in your package. If any of the items are missing, please contact
your vender.
• WLI-UC-GNHP................................................................................................................................ 1
• USB connector (option).............................................................................................................. 1
• Air Navigator CD............................................................................................................................ 1
• Quick Setup Guide....................................................................................................................... 1
Hardware Overview
ACT LED (Blue)
Flashes when sending
or receiving data.
WLI-UC-GNHP User Manual
Movable Antenna
Point straight up for best
performance.
5
Chapter 2
Installation
Installing Wireless Drivers
Follow the instruction below to install drivers. Do not connect the AirStation to your computer yet.
1
Boot your computer and insert the AirNavigator CD. The AirNavigator Setup Wizard will
launch automatically.
Note:
If the AirNavigator Setup Wizard doesn’t open, double click "My Computer", then your CD-ROM drive,
then ”AirNavi.exe”.
2
Click “Begin Installation”.
3
Click “AirStation Wireless LAN Adapters”.
WLI-UC-GNHP User Manual
6
Chapter 2 Installation
4
Disable the firewall if it is enabled, and click
“Next”.
5
Click “Install”.
Note:
6
WLI-UC-GNHP User Manual
If you check the box to Install Wireless Client
Manager, Client Manager software will also
be installed. You may install Client Manager
software later if desired.
Click “Next”.
7
Chapter 2 Installation
7
Read the license agreement and select “Agree”.
Then click “Next”.
8
Check Always trust software from "BUFFALO
INC." and click “Install”.
9
When this screen is displayed, attach the
AirStation to your computer. Drivers will be
automatically installed.
WLI-UC-GNHP User Manual
8
Chapter 2 Installation
10
Click “OK”.
11
Click “Finish”.
Note:
If you checked “Install Wireless Client Manager”,
the Client Manager installation wizard will run
after this screen. Follow the instructions on the
screen to install Client Manager.
You have installed drivers for your wireless AirStation client.
WLI-UC-GNHP User Manual
9
Chapter 2 Installation
Installing Client Manager Utility
If you didn’t install the “Client Manager” software with the drivers, you can install it later.
1
Boot your computer and insert the AirNavigator CD. The AirNavigator Setup Wizard will
launch automatically.
Note:
If the AirNavigator Setup Wizard doesn’t open, double click “My Computer”, then your CD-ROM drive,
then ”AirNavi.exe”.
2
Click “Options”.
3
Click “Advanced Installation”.
WLI-UC-GNHP User Manual
10
Chapter 2 Installation
4
Check the box for “Install Wireless Client
Manager”, then click “Install”.
Note:
Select Client Manager V for Windows Vista or
Client Manager 3 for Windows XP.
5
Click “Next”.
6
Read the license agreement and select “Agree”.
WLI-UC-GNHP User Manual
11
Chapter 2 Installation
7
Click “Next”.
8
Click “OK”.
9
Click “Back”.
10
Click “X” at the top right corner of the window
to close it.
Client Manager installation is complete.
WLI-UC-GNHP User Manual
12
Chapter 3
Connect to a Wireless Network
Automatic Secure Setup (AOSS/WPS)
AOSS and WPS are systems which automatically configure wireless LAN settings. Just pressing the
buttons will connect wireless devices and complete security settings. Utilize this system to connect to
wireless devices, computers, or game machines which support AOSS or WPS.
AOSS was developed by Buffalo Technology. WPS was created by the Wi-Fi Alliance.
Internet
őŖŔʼn
őŖŔʼn
ÅÒ
ÐÏ×
ÓÅÃ
ÕÒÉ
ÔÙ
ÅÓÓ
ÒÅÌ
×ÅÉ
ÔÅÒ
ÒÏÕ
Ç
ÄÉÁ
Modem
AirStation
PC or
Game console
(AOSS Devices)
Install Client Manager from the AirNavigator CD before using AOSS or WPS.
WLI-UC-GNHP User Manual
13
Chapter 3 Connect to a Wireless Network
Windows Vista (Client Manager V)
If you are using Windows Vista, use the Client Manager V software to connect wirelessly with AOSS or
WPS.
1
Click the
icon in the system tray to open Client Manager.
2
Click “Create Profile”.
WLI-UC-GNHP
3
When the message “A Program needs your permission to continue” appears, click “Continue”.
4
WLI-UC-GNHP User Manual
Click the “WPS AOSS “ button.
14
Chapter 3 Connect to a Wireless Network
When AOSS/WPS is complete, the Security LED will stop flashing and remain lit. The message
"Connection has been Completed" is displayed in Client Manager. If the “Set Network Location” screen
opens, select “Home”, “Work”, or “Public location” depending on where the AirStation will be used.
Windows XP (Client Manager 3)
If you are using Windows XP, use the included Client Manager 3 software to connect wirelessly with
AOSS or WPS.
1
Right click on the
icon in the system tray and select “Profile”.
2
When the screen shown at left is
displayed, click “WPS AOSS” button.
When AOSS/WPS is complete, the Security LED will stop flashing and remain lit. The message
"Security setup and connection have been Completed" is displayed in Client Manager.
WLI-UC-GNHP User Manual
15
Chapter 3 Connect to a Wireless Network
Automatic Secure Setup (WPS PIN)
The WPS standard also supports the use of a PIN (Personal Identification Number) to connect a
wireless client to a network. Use this feature if your wireless router supports WPS PIN.
Note: Install Client Manager software from the AirNavigator CD before using WPS PIN.
Windows Vista (Client Manager V)
If you are using Windows Vista, use Client Manager V to connect wirelessly with a WPS PIN.
1
Click the
icon in the system tray.
2
Click “Create Profile”.
WLI-UC-GNHP
3
When the message "A Program needs your permission to continue" appears, click “Continue”.
WLI-UC-GNHP User Manual
16
Chapter 3 Connect to a Wireless Network
4
Click the “Advanced Setup “
button.
5
Click the “WPS-PIN” button.
WLI-UC-GNHP User Manual
17
Chapter 3 Connect to a Wireless Network
6
This is the PIN code; write it down.
Then click “Next”.
7
Select the access point you are
going to connect to and click
“Next”.
This screen will be displayed.
WLI-UC-GNHP User Manual
18
Chapter 3 Connect to a Wireless Network
8
Connect your computer to the wireless router with a wired Ethernet cable. Log in to the
wireless router’s configuration utility and navigate to its WPS page. If your router is a Buffalo
AirStation, then the WPS page will be under the Wireless Config tab.
9
Enter the PIN code you wrote
down in step 6.
Example: If the access point you are
trying to connect is a Buffalo AirStation,
enter the PIN code in “Enrollee PIN” and
click “OK”.
If the “Set Network Location” screen is displayed, select “Home”, “Work”, or “Public location” depending
on where the AirStation will be used. When the message "Connection has been Completed” is
displayed in Client Manager V, you may disconnect the Ethernet cable. Your computer is now
connected to the network wirelessly.
WLI-UC-GNHP User Manual
19
Chapter 3 Connect to a Wireless Network
Windows XP (Client Manager 3)
If you are using Windows XP, use Client Manager 3 to connect wirelessly with a WPS PIN.
1
Right click on the
PIN Code type”.
icon displayed in the system tray, and select “Easy Connection” > “WPS
2
Write down the PIN code and
click “Next”.
3
Select the access point you are
going to connect to and click
“Next”.
WLI-UC-GNHP User Manual
20
Chapter 3 Connect to a Wireless Network
This screen will be displayed.
4
Connect your computer to the wireless router with a wired Ethernet cable. Log in to the
wireless router’s configuration utility and navigate to its WPS page. If your router is a Buffalo
AirStation, then the WPS page will be under the Wireless Config tab.
5
Enter the PIN code you wrote
down in step 6.
Example: If the access point you are
trying to connect is a Buffalo AirStation,
enter the PIN code in “Enrollee PIN” and
click “OK”.
When the message "Connection has been Completed” is displayed in Client Manager 3, you may
disconnect the Ethernet cable. Your computer is now connected to the network wirelessly.
WLI-UC-GNHP User Manual
21
Chapter 3 Connect to a Wireless Network
Manual Setup (Client Manager)
If your access point doesn’t support AOSS or WPS, you may configure your connection manually.
The procedure is slightly different if you have Windows XP or Vista.
These directions assume that you have already installed Client Manager software (page 10).
Windows Vista (Client Manager V)
With Windows Vista, use Client Manager V to connect wirelessly.
1
Click the
icon in the system tray.
2
Click “Create Profile “.
WLI-UC-GNHP
3
When the message "A Program needs your permission to continue" appears, click “Continue”.
WLI-UC-GNHP User Manual
22
Chapter 3 Connect to a Wireless Network
4
Click the “Advanced Setup“
button.
5
Click the “Connect Manually”
button.
WLI-UC-GNHP User Manual
23
Chapter 3 Connect to a Wireless Network
6
Select the access point to connect
to and click “Next”.
7
Choose “Network Type”, “Network
Name” (SSID), and “Security Type”.
Enter an “Encryption Key” (pass
phrase) and click “Connect.”
If the “Set Network Location” screen is displayed, select “Home”, “Work”, or “Public location” depending
on where the AirStation will be used. When the message "Connection Complete” is displayed in Client
Manager V, your computer is connected to the network wirelessly.
WLI-UC-GNHP User Manual
24
Chapter 3 Connect to a Wireless Network
Windows XP (Client Manager 3)
With Windows XP, use Client Manager 3 to connect wirelessly.
1
Right click on the
icon in the system tray and select “Scan”.
2
Select the access point to connect to
and click “Connect”.
3
Choose the type of encryption used
by your network and enter one of
more encryption keys.
Click “Connect” to connect to the network.
WLI-UC-GNHP User Manual
25
Chapter 3 Connect to a Wireless Network
Manual Setup (Windows Utility)
You can also connect to an access point without installing Client Manager V or Client Manager 3 by
using the wireless utility built-in to Windows. The procedure varies depending on the version of
Windows used.
Windows Vista (WLAN AutoConfig)
Use Windows standard utility (WLAN AutoConfig) to connect to your access point.
1
Right click on the wireless network icon
2
Click “Connect to a network”.
3
WLI-UC-GNHP User Manual
in the system tray.
Select your wireless network to connect to
and click “Connect”.
26
Chapter 3 Connect to a Wireless Network
If the screen below is displayed, click “I want to enter the network key or pass phrase instead”.
WLI-UC-GNHP User Manual
27
Chapter 3 Connect to a Wireless Network
4
Enter the encryption key (passphrase) and
click “Connect”.
If the “Set Network Location” screen is displayed, select “Home”, “Work”, or “Public location” depending
on where the AirStation will be used.
WLI-UC-GNHP User Manual
28
Chapter 3 Connect to a Wireless Network
Windows XP (Wireless Zero Configuration)
Windows XP includes a built-in utility to connect to your access point.
Note: If Client Manager 3 is installed on your computer, Wireless Zero Configuration is disabled. Uninstall Client Manager 3 to use Wireless Zero Configuration, or just use Client Manager 3 to connect to the AirStation.
1
Right click on the wireless network icon
2
Click “View Available Wireless Networks”.
in the system tray.
3
Select the network to connect to and click
“Connect”.
4
When the screen at left is displayed, enter
the encryption key (passphrase) and click
“Connect”.
You are now connected to the wireless network.
WLI-UC-GNHP User Manual
29
Chapter 4
Client Manager
Software Overview
Client Manager is software to manage your wireless connection. See page 10 to install Client
Manager on your computer.
Note:
There are two versions of Client Manager with this unit, "V" and "3".
Client Manager V supports Windows Vista.
Client Manager 3 supports Windows XP.
Using Client Manager V with Windows Vista
Opening and Closing Client Manager
• After installation, Client Manager automatically launches when Windows boots. To load Client
Manager manually, click “Start“ > “All Programs” > “BUFFALO” > “AirStation Utility” > “ClientManagerV”
.
• Right click on the Client Manager icon in the system tray and click “Exit” to close Client Manager.
The appearance of the Client Manager icon in the systray will change according to its connection
status:
: Not connected
: Communicating via an access point
WLI-UC-GNHP User Manual
30
Chapter 4 Client Manager
Main Screen
The Main screen displays the current connection status. You can perform the following operations
from this screen.
WLI-UC-GNHP
150 Mbps
Parameter
Meaning
Profiles
Displays information about currently available wireless connections.
If you have multiple connection points, you can switch among
them.
Transmission Speed
Displays the current connection speed.
Signal Strength
Displays the signal strength of the current connection.
Create Profile
Click this to display the Automatic Secure Setup and Advanced
Setup screen.
Advanced
Click this to display the Wireless Status screen.
WLI-UC-GNHP User Manual
31
Chapter 4 Client Manager
Automatic Secure Setup and Advanced Setup
Use this screen to connect to an access point automatically with AOSS or WPS. You can also connect
manually from here.
Parameter
Meaning
Wireless Adapter
Displays names of currently used wireless devices.
Automatic Secure Setup
Clicking this will start configuring the security settings
automatically for an access point which supports AOSS or WPS.
You can easily setup the wireless connection and security settings
by just following instructions on the screen.
Advanced Setup
Configure the settings for an access point manually.
Click this to display the SSID/WPS-PIN selection screen.
Option (Expert only)
Click this to specify whether you use AOSS or WPS for connection
in Automatic Secure Setup. It displays the WPS/AOSS selection
screen.
WLI-UC-GNHP User Manual
32
Chapter 4 Client Manager
SSID / WPS-PIN selection
If you your access point supports WPS-PIN, you can connect to it from here. This page also allows
you to enter an SSID manually.
Parameter
Meaning
Connect Manually
Specify SSID of an access point and configure connection settings.
Click here to display the Searching Wireless Access Points screen.
Connect with WPS-PIN
Click this to connect to a WPS compatible access point using a PIN.
WLI-UC-GNHP User Manual
33
Chapter 4 Client Manager
Searching Wireless Access Points
This screen lists available wireless access points. You can select an access point and connect to it.
Parameter
Meaning
Network Name (SSID)
Displays the SSID of each available access point.
Security
Lock icon appears if the network has security enabled.
Channel
Displays the wireless channel of each available access point.
Strength
Displays the signal strength for each available access point.
Enter the Network Name (SSID)
manually
Click this to entering an SSID manually. This displays the Wireless
Network Information screen.
Search
Click here to search an access point again.
Next
Click this to display the Wireless Network Information screen.
WLI-UC-GNHP User Manual
34
Chapter 4 Client Manager
Wireless Network Information
This screen lets you manually enter access point information.
Parameter
Meaning
Network Type
Select transmission method.
Network Name (SSID)
Enter an SSID of an access point.
Security Type
Select the security type.
Encryption Method
Select the encryption method.
Encryption Key or Passphrase
Enter an encryption key (pass phrase).
Connect to a network which does not Check to connect to a wireless network that doesn’t broadcast its
broadcast the SSID
SSID.
Connect
WLI-UC-GNHP User Manual
Click to connect.
35
Chapter 4 Client Manager
WPS-PBC / AOSS selection
Push-button connection to an access point that supports WPS or AOSS.
Parameter
Meaning
Automatic Secure Setup WPS-PBC
method
Click this to connect to a WPS compatible access point, then push
the WPS button on the access point or in its software. You will be
connected to the network automatically.
Automatic Secure Setup AOSS
method
Click this to connect to an AOSS compatible access point, then push
the AOSS button on the access point or in its software. You will be
connected to the network automatically.
WLI-UC-GNHP User Manual
36
Chapter 4 Client Manager
Wireless Status
The Status screen displays the current connection status.
WLI-UC-GNHP
ed
Parameter
Meaning
Adapter
Displays the name of the wireless device (this unit) which is
currently used.
Execute wireless LAN diagnostics
Displays the Wireless LAN Diagnostic screen.
Profile Name
Displays the current profile name.
Status
Displays the current transmission status.
Network Mode
Displays the current network mode.
Transmission Speed
Displays the current transmission speed.
SSID
Displays the SSID of the currently connected access point.
Channel
Displays the current wireless channel.
WLI-UC-GNHP User Manual
37
Chapter 4 Client Manager
Parameter
Meaning
Security
Displays whether or not the wireless connection is encrypted.
Authentication Type
Displays the type of authentication currently used.
Encryption Type
Displays the type of encryption currently used.
Signal Strength
Displays the current signal strength.
IP Address
Displays the IP address assigned to this unit.
Subnet Mask
Displays the subnet mask assigned to this unit.
Default Gateway
Displays the default gateway destination address.
Primary DNS
Displays the primary DNS address of your connection destination.
Secondary DNS
Displays the secondary DNS address of your connection destination.
MAC Address
Displays your wireless device’s MAC address.
WLI-UC-GNHP User Manual
38
Chapter 4 Client Manager
Wireless LAN Diagnostics
On this screen you can check signal strength and quality.
WLI-UC-GNHP
Parameter
Meaning
Adapter
Displays the name of the wireless device (this unit) currently in use.
Connection status
Displays signal strength (dBm), link rate (Mbps) and signal quality
(%) in chronological order in 1 minute intervals.
Note the following:
• Some wireless devices may not be displayed.
• Signal strength and quality may vary among different devices.
So, comparisons between readings for different wireless clients
may not be valid. Use these reading to compare wireless status
with the same wireless device.
Usage of each channel
This utility displays information for 2.4 GHz 11b/11g networks. 5
GHz 11a networks are not supported.
The color expresses a network’s signal strength. Stronger signals are
more red; weaker signals are more blue.
WLI-UC-GNHP User Manual
39
Chapter 4 Client Manager
Profile List
Create or edit profiles from this page.
WLI-UC-GNHP
Parameter
Meaning
Adapter
Displays the name of the current wireless client (such as the WLIUC-GNHP AirStation) in use on your computer.
New
Click to create a new profile.
Edit
Edit the selected profile. Click this to display the Extended
Properties screens.
Delete
Delete the selected profile.
Down
Lower the priority of the selected profile.
Up
Raise the priority of the selected profile.
WLI-UC-GNHP User Manual
40
Chapter 4 Client Manager
Extended Properties (Wireless)
View the wireless settings for a profile.
Parameter
Meaning
Connection
Displays the current profile name.
SSID
Displays the SSID of the currently connected access point.
Security Type
Displays the current connection’s security type.
Encryption Type
Displays the current connection’s encryption type.
Security key or Pass phrase
Displays the security key or pass phrase if “Display password visible“
is checked.
Connect an access point even SSID
broadcasting is disabled.
Check to connect to a wireless network that doesn’t broadcast its
SSID.
WLI-UC-GNHP User Manual
41
Chapter 4 Client Manager
Extended Properties (Network)
You may configure Client Manager to use different network settings when connected wirelessly with
this profile.
Parameter
Meaning
Do not change IP Address settings of
this Profile
Keeps current TCP/IP network settings.
Use the following settings
Select this option to configure different TCP/IP network settings
when connecting wirelessly with this profile. You can configure IP
address, Subnet Mask, Default gateway, and DNS server address
settings.
WLI-UC-GNHP User Manual
42
Chapter 4 Client Manager
Extended Properties (Browser)
You may configure Client Manager to use different browser settings when connected wirelessly with
this profile.
Parameter
Meaning
Do not change the browser settings
of this Profile
Keeps current Internet Explorer settings.
Use the following settings
Select this option to configure different settings for Internet
Explorer home page and proxy server when connecting wirelessly
with this profile..
WLI-UC-GNHP User Manual
43
Chapter 4 Client Manager
Extended Properties (Printers)
You may configure Client Manager to use different printer settings when connected wirelessly with
this profile.
Parameter
Meaning
Do not change the printer settings of Keeps current printer settings.
this Profile
Use the following settings
WLI-UC-GNHP User Manual
Select this option to use a different printer when connecting
wirelessly with this profile.
44
Chapter 4 Client Manager
Using Client Manager 3 with Windows XP
Opening and Closing Client Manager
• After installation, Client Manager automatically launches when Windows boots. To launch Client
Manager manually, click “Start” > “All Programs” > “BUFFALO” > “AirStation Utility” > “ClientManager3”
.
• Right click on the Client Manager icon in the system tray and click “Exit” to close Client Manager.
The appearance of the Client Manager icon in the systray will change according to its connection
status:
: Wireless client is not connected to the computer
: No connection to access point
: Transmitting via an access point (encrypted with TKIP/AES)
: Transmitting via an access point (Encrypted with WEP, or not encrypted)
: Transmitting in ad-hoc mode (not supported with this unit)
: Authenticating
WLI-UC-GNHP User Manual
45
Chapter 4 Client Manager
Status
The Status screen displays the current connection status.
WLI-UC-GNHP
150Mbps
Parameter
Meaning
Profile
Displays the name of the profile currently in use.
SSID
Displays the currently connected access point’s SSID.
Adapter Name
Displays the name of the current wireless client.
Network Type
Displays the current network mode.
Transmission Speed
Displays the current transmission speed.
Channel
Displays the current wireless channel.
Security
Displays whether this connection uses encryption.
IP Address
Displays the IP address assigned to this unit.
WLI-UC-GNHP User Manual
46
Chapter 4 Client Manager
Parameter
Meaning
MAC Address
Displays the MAC address of this unit.
Duration
Displays the duration of this connection.
Signal Strength
Displays the current signal strength.
Reconnect
Click this to reconnect with this profile.
WLI-UC-GNHP User Manual
47
Chapter 4 Client Manager
Scan
This screen lists available wireless access points. You can select an access point and connect to it.
Parameter
Meaning
SSID
Lists SSIDs of each available access point.
Wireless mode
Displays the type of wireless network (11a or 11g) for each access
point.
Channel
Displays the wireless channel used by each access point.
Strength
Displays the signal strength of each access point.
Encryption
Lock icon appears if the access point has encryption enabled.
Connect
Click to navigate to the Connect screen..
Refresh
Click to relist available access points.
WLI-UC-GNHP User Manual
48
Chapter 4 Client Manager
Connect
This screen configures settings to connect to an access point.
Parameter
Meaning
Encryption Method
Select the encryption type used by the access point.
Encryption Key
Enter at least one encryption key (pass phrase) for the access point.
Register Profile
Check to save these settings as a profile.
WLI-UC-GNHP User Manual
49
Chapter 4 Client Manager
Profiles
View or edit profiles here.
Parameter
Meaning
Connect
Select a profile, then click this button to connect.
Add
Click to add a new profile. Displays the Profiles Information screen.
Edit
Click to edit or delete a profile.
WPS AOSS
Click to have connect automatically with AOSS or WPS. After
connection, a profile for this connection is created automatically.
802.1x Profiles
This button is displayed when Client Manager is operating in
Business Mode. Click to configure 802.1x authentication.
WLI-UC-GNHP User Manual
50
Chapter 4 Client Manager
Profile Information (Basic)
Configure basic settings for a profile.
Parameter
Meaning
Display Icon
Choose a display icon for this profile from the dropdown list.
Select Profile
Profile may be configured to use either a wireless or wired
connection. For use with the AirStation wireless client, choose
wireless.
Profile Name
Choose a name for this profile.
Network Type
For use with an access point, choose “Infrastructure Mode”. To
connect to another wireless client, chose “Ad-hoc Mode”.
SSID
The SSID is the “name” of the network that you’re connecting to..
Channel
Auto-Channel will select the best channel for you automatically,
or you may choose a specific channel manually. In Infrastructure
mode, Auto-Channel is enabled.
Encryption Method
Select the encryption method used by this access point.
WLI-UC-GNHP User Manual
51
Chapter 4 Client Manager
Parameter
Meaning
Transmission Key
Enter the number of encryption keys allowed. If using WEP for
Encryption, you may enter up to four encryption keys. Only a single
key is necessary.
Encryption Key
Enter an encryption key or keys.
AP is set to exclusive connection
Check to connect to a wireless network that doesn’t broadcast its
SSID.
WLI-UC-GNHP User Manual
52
Chapter 4 Client Manager
Profile Information (Network)
You may configure Client Manager to use different network settings when connected wirelessly with
this profile.
Parameter
Meaning
Do not change IP Address settings of
this Profile
Keeps current TCP/IP network settings.
Automatically acquire the IP Address
Check to automatically acquire an IP address from a DHCP server
when connected wirelessly with this profile.
Automatically acquire the DNS Server Check to automatically acquire the IP address of the DNS server
Address
from a DHCP server when connected wirelessly with this profile.
WLI-UC-GNHP User Manual
53
Chapter 4 Client Manager
Profile Information (Browser)
You may configure Client Manager to use different browser settings when connected wirelessly with
this profile.
Parameter
Meaning
Do not change the browser settings
of this Profile
Check to keep current Internet Explorer settings. Uncheck to use
special settings below.
Address to use as Home Page
Configure a special home page address to display when connected
wirelessly with this profile.
Use the Proxy Server
Configure a proxy server IP address or port number to use when
connected wirelessly with this profile..
Do not use the proxy server for a local If checked, the proxy server above will not be used for local
address
addresses..
WLI-UC-GNHP User Manual
54
Chapter 4 Client Manager
Profile Information (Printers)
You may configure Client Manager to print to a different printer when connected wirelessly with this
profile.
Parameter
Meaning
Do not change the printer settings of
this Profile
Check to use your current printer. Uncheck to select a different
printer for use when connected wirelessly with this profile.
WLI-UC-GNHP User Manual
55
Chapter 4 Client Manager
System Tray Menu
Right-click on the Client Manager icon in the system tray to display the following menu. You can
configure various settings from here.
Parameter
Meaning
Status
Click to display the Status screen.
Scan
Click to display the Scan screen.
Profile
Click to display the Profiles screen.
Easy Connection
Select an automatic configuration method. Supported automatic
configuration programs include AOSS, WPS, and WPS PIN..
Help
Displays Client Manager Help.
Option
Click to display the Option Menu.
Version Information
Click to display your Client Manager’s version.
Exit
Click to exit Client Manager.
WLI-UC-GNHP User Manual
56
Chapter 4 Client Manager
Option Menu
This menu is to configure options settings of Client Manager.
Parameter
Meaning
Mode
Switches between “Business Mode” and “Home Mode”. “Home
Mode” is recommended for most users. “Business Mode” allows
configuration of 802.1x authentication from the Profiles screen.
Lock
If you click this, you will not be able to add, edit, or delete profiles.
A password is required to lock or unlock this. The password may
have 8 - 63 characters..
Export a profile
Click this to save a profile as a portable file. Information currently
registered. A password (8-63 characters) is required to save a
profile.
Import a profile
Click this to import a saved profile into Client Manager. You will
need to enter the password to complete this operation.
WLI-UC-GNHP User Manual
57
Chapter 4 Client Manager
Parameter
Meaning
Initialize profile
Click this to initialize profile information. Unit must be unlocked to
use this option.
Use the following network adapter
Select a network adaptor to use with Client Manager. “Wireless
Adapter Auto-select” is recommended for most users.
Automatically connect to the profile
with highest priority
If checked, Client Manager will attempt to connect to the
profile with the highest priority as set on the Profile screen. It is
recommended that most users check this box..
WLI-UC-GNHP User Manual
58
Chapter 5
Trouble Shooting
The Computer does not recognize the WLI-UC-GNHP
Wireless Adapter.
• Make sure that the unit is connected to a USB port on your computer.
• If your computer has multiple USB ports, try connecting to a different USB port.
• Refer to the "Install Wireless Drivers" section of this manual and reinstall drivers for the unit.
Cannot connect to the network wirelessly.
• Refer to chapter 3 to connect the AirStation to an access point wirelessly.
• Configure the same SSID, encryption method, and encryption key for both your access point
and your wireless client.
• Temporarily move your wireless devices closer together.
• Restart your modem, then restart your access point, then reboot your computer.
You forgot SSID, Encryption KEY, or Password.
Try to connect wirelessly with AOSS or WPS.
Ask your network administrator about the correct SSID and encryption settings for your network.
Reset your access point to factory defaults and reconfigure it from scratch. Write down your new
wireless network settings carefully!
WLI-UC-GNHP User Manual
59
Chapter 5 Trouble Shooting
My link speed is slower than 150 Mbps (Maximum
link speed is only 72Mbps).
The default setting for 150 Mbps mode on many access points is “off’. Enable 150 Mbps mode on
your access point. Also, refer to "AirStation Bandwidth 20/40MHz Select Tool" to turn on 150 Mbps
mode for your AirStation wireless client if necessary.
Other Tips
Issue:
When using the Windows wireless connection manager, I cannot connect to my wireless router. I
receive a "Cannot configure wireless network" error message when scanning for available wireless
networks.
Answer:
Another wireless client software may be installed on your computer that is taking control of the
wireless client adapter away from the Windows connection manager. Either switch to the other
software or use Add/Remove Programs to remove the conflicting client software. After rebooting,
the Windows connection manager should be able to connect to the available wireless networks.
Issue:
When I attempt to connect to my wireless router, I receive an error message indicating that security
settings on my computer are not matching the settings on the router.
Answer:
Consult your network administrator (or your router) for the correct SSID, encryption type, and
encryption key. To manually enter the correct security key and SSID in Windows XP, open Control
Panel and click on Wireless Network Setup Wizard. Step through the wizard, entering the correct SSID
and encryption key.
WLI-UC-GNHP User Manual
60
Chapter 5 Trouble Shooting
Issue:
What can I do if my wireless connection drops randomly or seems slow?
Answer:
There are many environmental factors that may affect this behavior. First, ensure the issue is not
range related by locating the wireless router and the client in closer proximity and check whether
the connection drops continue.
In some cases, interference from other wireless networks or sources such as 2.4 GHz wireless phones
may impact performance. To work around this scenario, change the wireless channel used by your
wireless router.
Log in to the wireless router with your browser. Click on the “Wireless Configuration”. If an “AutoChannel” option is available, attempt to use this option to remedy the problem. If “Auto-Channel” is
unavailable, manually select an alternate channel.
Issue:
Though I am able to successfully make a connection with my wireless router, I am unable to access
the Internet with my web browser.
Answer:
First, power off the Cable or DSL modem, the wireless router, and then your computer. Pressing
a power button or simply unplugging the devices can power off the modem and wireless router
devices. Then after verifying that the modem is connected to the wireless router with a cable to the
WAN port, power on the modem and wait two minutes. Turn on the wireless router and wait another
two minutes. Then, turn on the computer. Verify whether an Internet connection is available.
If after these steps, an Internet connection is still unavailable, power off the Cable or DSL modem
and computer again and directly connect your computer to the Cable or DSL modem with a cable
between the computer and the port on the modem. Power on the modem and wait two minutes.
Power on the computer and again check for an Internet connection.
If an Internet connection IS NOT available with a direct connection to the computer, please call the
Internet Service Provider who installed the modem.
If an Internet connection IS available with a direct connection to the computer, please call our
customer support line.
WLI-UC-GNHP User Manual
61
Chapter 5 Trouble Shooting
Issue:
Where can I download the latest drivers, firmware and instructions for my Buffalo wireless products?
Answer:
The latest drivers and firmware with installation instructions are available online at
www.buffalotech.com
WLI-UC-GNHP User Manual
62
Appendix
150 Mbps Mode settings
By default, 150 Mbps mode on your AirStation wireless client is set to OFF. Use the utility software
AirStation Bandwidth 20/40MHz Select Tool, which comes with this unit, to turn on 150 Mbps mode.
To configure it:
1. Click “Start” > “All Programs” > “BUFFALO” > “AirStation Utility” > “AirStation Bandwidth
20/40MHz Select Tool” and launch the utility software.
If you are using Windows Vista and the message "A program needs your permission to
continue" is displayed, click “Continue”.
2. When the message "Now start the step wizard of Bandwidth Select Tool" is displayed, click
“Next”.
3. Click “Next”.
4. When the message "Select of wireless adapter", select this unit and click “Next”.
5. Select "Use 150Mbps Mode (40MHz)", and click “Next”.
6. When the message "Wireless adapter setting is competed." is displayed, click “Exit to setup”.
If you still cannot establish a 150 Mbps communication speed, check the settings on your access
point.
WLI-UC-GNHP User Manual
63
Chapter 6 Appendix
Specifications
Wireless LAN Interface
Standard Compliance
IEEE802.11b / IEEE802.11g / IEEE802.11n
Transmission Method
Direct Sequence Spread Spectrum (DSSS), OFDM, SISO
Frequency Range
2,412 - 2,462MHz (Channels 1 - 11)
Transmission Rate
802.11b/g:
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, 1Mbps
802.11n
20MHz BW
(LongGI) 65, 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps (1stream)
(ShortGI) 72.2, 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2Mbps (1stream)
40MHz BW
(LongGI) 135, 121.5, 108, 81, 54, 40.5, 27, 13.5Mbps (1stream)
(ShortGI) 150, 135, 120, 90, 60, 45, 30, 15Mbps (1stream)
Access Mode
Infrastructure Mode / Ad Hoc mode (X link KAI is not supported.)
Security
WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), 128/64bit WEP
Other
Power Supply
5.0V Bus powered
Power Consumption
2500 mW (Max)
Dimensions
15 mm x 15 mm x 112 mm (0.6” x 0.6” x 4.4”)
Weight
15 g (0.5 ounce)
Operating Environment
0-40°C (32-104°F), 20-80% (non-condensing)
WLI-UC-GNHP User Manual
64
Chapter 6 Appendix
Removing the device from the computer
Windows Vista /XP
If you use Windows Vista or XP, just unplug it.
Uninstalling the Software
If you remove the software, follow the procedure described below.
1. Insert AirNavigator CD.
When you insert CD, AirNavigator Setup Wizard will launch automatically.
If AirNavigator Setup Wizard is not displayed, double click "My Computer" icon > CD-ROM
drive icon > "AirNavi.exe" icon, in this order.
2. Click “Options”.
3. Click “Uninstall software”.
4. Follow the instructions on the screen to delete the Utility software.
Uninstalling the Drivers
To remove the software, follow the procedure described below.
1. Insert AirNavigator CD.
When you insert CD, AirNavigator Setup Wizard will launch automatically.
If AirNavigator Setup Wizard is not displayed, double click "My Computer" icon > CD-ROM
drive icon > "AirNavi.exe" icon, in this order.
2. Click “Options”.
3. Click “Remove Drivers”.
4. Follow the instructions on the screen to remove drivers.
WLI-UC-GNHP User Manual
65
Chapter 6 Appendix
TCP/IP Settings
Windows Vista
To configure TCP/IP settings in Windows Vista, follow the procedure below.
1
Click Start > Settings > Control Panel.
2
Double click “Network and Sharing Center”.
3
Click “Manage network connections” on the left side menu.
4
Right click on “Local Area Connection”, then click “Properties”.
5
When the message “Windows needs your permission to continue” appears, click
6
Select “Internet Protocol Version 4 (TCP/IPv4)” then click “Properties”.
7
Select “Obtain an IP address automatically” and “Obtain DNS server address
“Continue”.
automatically”, and then click “OK”.
8
Click “Close”.
WLI-UC-GNHP User Manual
66
Chapter 6 Appendix
Windows XP
To configure TCP/IP settings in Windows XP, follow the procedure below.
1
Click Start > Settings > Control Panel.
2
Double click “Network”.
3
Right click on “Local Area Connection”, then click “Properties”.
4
Select “Internet Protocol (TCP/IP)”, then click “Properties”.
5
Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”,
and then click “OK”.
6
Click “Close”.
Antenna
The WLI-UC-GNHP has a movable antenna that may be used in different positions. Adjust the angle
for the best signal as needed. Turning the unit so that the antenna points stright up will probably
give the strongest signal.
Movable Range
0°- 90°
WLI-UC-GNHP User Manual
Movable Range
0°-270°
horizontal directionality
360°
67
Chapter 6 Appendix
Compliance Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
possibly radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Important Note - FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance.
To maintain compliance with FCC RF exposure compliance requirements, please follow operation
instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
SAR compliance has been established in typical laptop computer(s) with USB slot, and product
could be used in typical laptop computer with USB slot. Other application like handheld PC or
WLI-UC-GNHP User Manual
68
Chapter 6 Appendix
similar device has not been verified and may not comply with related RF exposure rule and such use
shall be prohibited.
The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotopically radiated power (EIRP) is not more than that required for
successful communication. This device has been designed to operate with an antenna having a
maximum gain of 3.0 dBi. Antenna having a higher gain is strictly prohibited per regulations of
Industry Canada. The required antenna impedance is 50 ohms. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotopically radiated power (e.i.r.p.) is not more than that permitted for successful
communication.
Important Note - Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with IC RF exposure compliance requirements, please follow
operation instruction as documented in this manual.
Europe - EU Declaration of Conformity:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
The following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
-EN60950-1:2006
Safety of Information Technology Equipment
-EN62311:2008
WLI-UC-GNHP User Manual
69
Chapter 6 Appendix
Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields(0 Hz-300 GHz).
-EN300 328 V1.7.1 (2006)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum
modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the
R&TTE Directive.
-EN301 489-1 V1.8.1(2008)
Electromagnetic compatibility and Radio spectrum Matters (ERM) — ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services — Part 1: Common technical requirements.
-EN301 489-17 V1.3.2(2008)
Electromagnetic compatibility and Radio spectrum Matters (ERM) — ElectroMagnetic Compatibility
(EMC) standard for radio equipment — Part 17: Specific conditions for 2,4 GHz wideband
transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz Broadband
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU
member states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
an authorization to use the device for setting up outdoor radio links and/or for supplying public
access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the
RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For
detailed information the end-user should contact the national spectrum authority in France.
NCC Regulatory Information
來自台灣 NCC 的警告
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,
並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率
射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
WLI-UC-GNHP User Manual
70
Chapter 6 Appendix
Česky[Czech]
Buffalo Technology Inc. tímto prohlašuje, že tento AirStation WLI-UC-GNHP je ve shodě se základními
požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk[Danish]
Undertegnede Buffalo Technology Inc. erklærer herved, at følgende udstyr AirStation WLI-UC-GNHP
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch[German]
Hiermit erklärt Buffalo Technology Inc. dass sich das Gerät AirStation WLI-UC-GNHP in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti[Estonian]
Käesolevaga kinnitab Buffalo Technology Inc. seadme AirStation WLI-UC-GNHP vastavust direktiivi
1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, Buffalo Technology Inc. declares that this AirStation WLI-UC-GNHP is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Español[Spanish]
Por medio de la presente Buffalo Technology Inc. declara que el AirStation WLI-UC-GNHP cumple
con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Ελληνική[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Buffalo Technology Inc. ΔΗΛΩΝΕΙ ΟΤΙ AirStation WLI-UC-GNHP ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français[French]
Par la présente Buffalo Technology Inc. déclare que l’appareil AirStation WLI-UC-GNHP est conforme
aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano[Italian]
Con la presente Buffalo Technology Inc. dichiara che questo AirStation WLI-UC-GNHP è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski[Latvian]
Ar šo Buffalo Technology Inc. deklarē, ka AirStation WLI-UC-GNHP atbilst Direktīvas 1999/5/EK
būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
WLI-UC-GNHP User Manual
71
Chapter 6 Appendix
Lietuvių[Lithuanian]
Šiuo Buffalo Technology Inc. deklaruoja, kad šis AirStation WLI-UC-GNHP atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands[Dutch]
Hierbij verklaart Buffalo Technology Inc. dat het toestel AirStation WLI-UC-GNHP in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/
EG.
Malti[Maltese]
Hawnhekk, Buffalo Technology Inc. , jiddikjara li dan AirStation WLI-UC-GNHP jikkonforma malħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar[Hungarian]
Alulírott, Buffalo Technology Inc. nyilatkozom, hogy a AirStation WLI-UC-GNHP megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski[Polish]
Niniejszym, Buffalo Technology Inc. , deklaruję, że AirStation WLI-UC-GNHP spełnia wymagania
zasadnicze oraz stosowne postanowienia zawarte Dyrektywie 1999/5/EC.
Português[Portuguese]
Buffalo Technology Inc. declara que este AirStation WLI-UC-GNHP está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko[Slovenian]
Buffalo Technology Inc. izjavlja, da je ta AirStation WLI-UC-GNHP v skladu z bistvenimi zahtevami in
ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky[Slovak]
Buffalo Technology Inc. týmto vyhlasuje, že AirStation WLI-UC-GNHP spĺňa základné požiadavky a
všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi[Finnish]
Buffalo Technology Inc. vakuuttaa täten että AirStation WLI-UC-GNHP tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svensk[Swedish]
Härmed intygar Buffalo Technology Inc. att denna AirStation WLI-UC-GNHP står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
WLI-UC-GNHP User Manual
72
Chapter 6 Appendix
CONDICIONES (Mexico)
PRIMERA-El certificado provisional tiene vigencia de un año a partir de esta fecha y prodrá
ser renovado hasta en dos ocasiones por el mismo período, para lo cual, previo a la fecha de
vencimiento del Certificado deberá solicitar por escrito a esta Comisión su renovación. El Ceritificado
definitivo tiene vigencia indefinida.
SEGUNDA-El Certificado de Homologación, podrá ser cancelado a petición del solicitante a cuando
la Comisión Federal de Telecomunicaciones así lo determine con fundamento en el Artículo 149 del
Reglamento de Telecomunicaciones, o bien de acuerdo a lo señalado en el Capítulo Segundo de la
Ley Federal de Procedimiento Administrativo.
TERCERA-Los equipos amparados por este Certificado de Homologación deberán tener indicado
en alguna parte visible, firmemente adherido, el númerode Certificado de Homologación
correspondiente, así como la marca y modelo con la que se expide este Certificado.
CUARTA-La Comisión Federal de Telecomunicación podrá requerir en cualquier momento a la
empresa presentación de información ténica adicional, así como las muestras del equipo para
realizar pruebas de comportamiento y verificar las caraterísticas del mismo.
QUINTA-Cualquier modificación estructural o de configuración ténica deberá someterse a
consideración de la Comisión, para que ésta determine si procede el otorgamiento de una
ampliación del Certificado de Homologación o si requiere de un nuevo Certificado.
SEXTA-El equipo que ampara el presente certificado deberá operar conforme a las regulaciones
ténicas, reglas,reglamentos y otras disposiciones administrativas vigente o que llegara a emitir
o adoptar la Comisión Federal de Telecomunicaciones y/o la Secretaría de Comunicaciones y
Transportes.
SEPTIMA-El equipo de radiocomunicación que ampara el presente certificado deberá operar
de conformidad con el Reglamento de Radiocomunicaciones de la Unión Internacional de
Telecomunicaciones y el Cuadro Nacional de Atribución de Frequencias México vigente.
OCTAVA-Las antenas de las estaciones terrenas deberán cumplir con el patrón de radiación
Recomendado por la Unión Internacional de Telecomunicaciones, Sector de Radio Frequencia
UIT-R, en el casdo de sistemas de microondas las antenas de los mismos deberán cumplir con las
recomendaciones del UIT-R, conforme a su banda de operación.
NOVENA-La homologación de este equipo no implica la autorización para prestar servicios públicos
de telecomunicaciones ni para establecer aplicaciones que obstruyan o invadan cualquier via
general de comunicación.
DECIMA- El inclumplimiento de las condiciones estipuladas en este Certificado será motivo
de sanción con base a lo dispuesto en la Ley de Vías General de Comunicación, Ley Fedreal de
Telecomunicación y en el Reglamento de Telecomunicaciones.
WLI-UC-GNHP User Manual
73
Chapter 6 Appendix
Logos and IDs
[ Australia ]
[ Mexico ]
[ Canada ]
6102A-026
[ Singapore ]
[ China ]
CMIIT ID: 2009DJ3691
[ Taiwan ]
[ India ]
194/2009/WRLO
[ United States ]
Número: RCPBUWL09-0771
Complies with
IDA Standards
DA103412
CCAH09LP0900T6
Tested to comply
With FCC Standards
FCC ID: FDI-09102082-0
[ Korea ]
[ UAE ]
BUF-WLIUCGNHP01(B)
[ Kuwait ]
MC/M/5/3-5511
[ Philippines ] No.ESD-0904340C
WLI-UC-GNHP User Manual
[ Oman ]
[ Indonesia ]
TRA
REGISTERED No:
0019204/09
DEALER No:
0014005/08
TRA/TA-R/1167/09
12596/POSTEL/2009
2347
74
Chapter 6 Appendix
Environmental Information
• The equipment that you have purchased has required the extraction and use of natural resources
for its production.
• The equipment may contain hazardous substances that could impact health and the environment.
• In order to avoid the dissemination of those substances in our environment and to diminish the
pressure on the natural resources, we encourage you to use the appropriate take-back systems.
• The take-back systems will reuse or recycle most of the materials of your end life equipment in a
sound way.
• The crossed-out wheeled bin symbol invites you to use those systems.
• If you need more information on the collection, reuse and recycling systems, please contact your
local or regional waste administration.
WLI-UC-GNHP User Manual
75
Chapter 6 Appendix
Warranty Information
Buffalo Technology (Buffalo Inc.) products come with a two-year limited warranty from the date of
purchase. Buffalo Technology (Buffalo Inc.) warrants to the original purchaser the product; good
operating condition for the warranty period. This warranty does not include non-Buffalo Technology
(Buffalo Inc.) installed components. If the Buffalo product malfunctions during the warranty period,
Buffalo Technology/(Buffalo Inc.) will, replace the unit, provided the unit has not been subjected
to misuse, abuse, or non-Buffalo Technology/(Buffalo Inc.) authorized alteration, modifications or
repair.
All expressed and implied warranties for the Buffalo Technology (Buffalo Inc) product line including,
but not limited to, the warranties of merchantability and fitness of a particular purpose are limited in
duration to the above period.
Under no circumstances shall Buffalo Technology/(Buffalo Inc.) be liable in any way to the user
for damages, including any lost profits, lost savings or other incidental or consequential damages
arising out of the use of, or inability to use the Buffalo products.
In no event shall Buffalo Technology/(Buffalo Inc.) liability exceed the price paid for the product from
direct, indirect, special, incidental, or consequential damages resulting from the use of the product,
its accompanying software, or its documentation. Buffalo Technology (Buffalo Inc.) does not offer
refunds for any product.
@ 2003-2009 Buffalo Technology (Buffalo, Inc.)
WLI-UC-GNHP User Manual
76
Chapter 6 Appendix
Contact Information (USA / Canada)
Buffalo Technology USA Inc.
11100 Metric Blvd, Suite 750
Austin, TX 78758-4018
GENERAL INQUIRIES
Monday through Friday
8:30am-5:30pm CST
Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 |
Email: sales@buffalotech.com
TECHNICAL SUPPORT
North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and
Canada).
Toll-free: (866) 752-6210 | Email: info@buffalotech.com
WLI-UC-GNHP User Manual
77
Chapter 6 Appendix
Contact Information (Europe)
Buffalo Technology UK LTD
176 Backingham Avenue,
Slough, Berkshire, SL1 4RD
United Kingdom
GENERAL INQUIRIES
Email: sales@buffalo-technology.com
TECHNICAL SUPPORT
Phone (UK only): 08712 50 12 60*
Phone: +353 61 70 80 50
Email: sales@buffalo-technology.com
*Calls cost 8.5p per minute
Technical Support Operating Hours
Monday - Friday (GMT)
9:00 AM - 6:00 PM Monday-Thursday
9:00 AM - 4:30 PM Friday
At Buffalo Technology, we constantly update our software and firmware. For the most recent
software, firmware, driver, and technical whitepaper releases available, please visit the Buffalo
Technology website: www.buffalotech.com.
WLI-UC-GNHP User Manual
78