MOTO-1 BMW User manual

MOTOMOTO-1
User manual
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
Operate introduction
Dear user
Your purchased tool is belong to the MOTO-1 ® series,
it cover all our technology and experience in many
years. The tool will be a very useful work partner and
friend to you, satisfy both you and your end customers.
We welcome you and your customer join in us and
many thanks for you have expand the sell areas of our
product and bring our value to our common customers,
we firmly believe that we can achieve a win-win
cooperation result if we based on the mutual benefit
and equal principles.
Our authorized dealers and our service department will
help you solve all the technology problems you
encountered in the use process of this tool.
2
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
Notes
This manual is a necessary part of the tool. It contains its technology features
and functions. Please reading the manual carefully before you use the tool or
store it.
1. When the engine is working,
working, please make sure that the indoor is ventilation or
connect the exhaust gas equipment to the vehicle’
vehicle’s exhaust system. We do
this because the carbon monoxide produced by the engine is toxic gas what
no color and odorless,
odorless, excess intake by people will lead to serious results even
die.
2. Before use the diagnostic scanner, please make sure the motorcycle has been
parked in a stable state and don’
don’t use the scanner during driving process.
3. When you operate the diagnostic scanner during the engine running, please
keep enough distance from any running parts of the engine or the driving belt.
Because the running parts of engine or the driving belt may engulf clothes, the
connecting line of the diagnostic scanner or any part of the Conner’s body to
lead serious hurt.
4. Unless there is other operation direction, you must turn off the ignition switch
when connecting or removing the line of electronic circuit components.
5.When
5.When the engine is running, please don’
don’t touch the ignition coil, the ignition
coil terminals
terminals or the spark plug, which can produce very high voltage.
6. Although the diagnostic scanner has a safety design that the battery can
prevent from being connected reverse, but we still strongly remind you must
make sure the battery polarity before you connecting
connecting the scanner.
7. Never put the diagnostic scanner on the battery. Because it is very likely to
lead battery shortshort-circuit, and cause personnel hurt, equipment damage and
vehicle trouble.
8. Please don’
don’t touch the exhaust, engine or radiator system when it is running
or just finished running. If you have to touch the hot parts, please wear the
tested heatheat-resistant gloves to avoid burn.
9. Please don’
don’t expose the scanner in the flammable gas or steam.
10. This diagnostic scanner belongs to precise electronic product, please don’
don’t
unweave or repair it by yourself.
11. If there is any change in the actual producing, we won’
won’t give a prior notice.
3
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
Chapter One
Contents
Product Structure…………………………………………………..1
1.1 External View of Mainframe……………………………………………………………………….1
1.1.1 Front layout of mainframe………………………………………………………………………1
1.1.2 Operation guide for the top part of mainframe………………………………………..1
1.1.3 Operation guide for the bottom part of mainframe………………………………….1
1.2 Technical parameter………………………………………………………………………………….2
Chapter Two
Function Introduce…………………………………………………2
2.1 Mainframe power supply modes………………………………………………………………..2
2.2 Menu introduction of boot-strap…………………………………………………………………2
2.3 System Diagnostic Menu……………………………………………………………………………3
2.4 System Information Menu………………………………………………………………………….3
2.5 Software Update Menu………………………………………………………………………………4
Chapter Three System diagnostic…………………………………………………4
3.1 System Diagnostic Introduction………………………………………………………………….5
3.2 Read Trouble Code…………………………………………………………………………………….5
3.3 Clear Trouble Code…………………………………………………………………………………….7
3.4 Read Data Stream……………………………………………………………………………………..8
3.5Read ECU ID……………………………………………………………………………………………..11
Appendix I: FAQ and Solution………………………………………………………..12
-4-
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
Chapter One
Product structure
1.1 External View of Mainframe
Length:
1.1.1
Mainframe Length: 220mm
Mainframe Width: 150mm
Vision Screen Length: 104mm
Vision Screen Width: 81mm
Instruction of keyboard
【 ENTER】 key: Confirmation to the current
option.
【EXIT】key: Negation to the problem or return
to the last menu
【↑】key: Upward movement
【↓】key: Downward movement
【→】key: Move forward【←】key: Move
backward【RESET】key: Function key
Front layout of Mainframe
1.1.2 Operation guide for the top
part of mainframe
1. Brightness adjusting knob of the Mainframe
screen
2. Power supply switch of the Mainframe
1.1.3 Operation guide for the bottom part
of mainframe
1. Power supply insert
2. Diagnose interface
3. USB interface
1
1.2 Technical parameter
Working Voltage: DC12V
Working current: <1A
Working temperature: 0~40℃
Humidity: <80%
Chapter Two
Function introduction
2.1 Mainframe power supply modes
VINASHIN MOTOOR EFI fault diagnostic instrument has several power supply modes
1. Motorcycle diagnostic connector power supply.
2. A.C.transformer power supply
3. Provide electricity with USB interface, mainly used during the software updating.
2.2 Menu introduction of bootboot-strap
After electrifying the mainframe, turn on the power supply. The mainframe displays the application
object of the scanner: MOTORCYCLE SCANNER. After waiting for 1sec. it can enter the main
menu automatically.
BMW MOTOR
1.System Diagnosis
2. System Information
3. Software Updating
Select
ENTER
The main menu displays the function menu of VINASHIN MOTOR EFI fault diagnostic instrument.
There are three correlative function menus. As shown in the picture above, the black item means the
choosing item.
2
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
2.3 System Diagnosis Menu
BMW MOTOR
1.System Diagnosis
2. System Information
3. Software Updating
Select
ENTER
This menu is the main menu of this diagnostic scanner; all the diagnostic functions enter from this
menu. Because of its importance, we will give a detailed description in the later section.
2.4 System Information Menu
BMW MOTOR
1.System Diagnosis
2. System Information
3. Software Updating
Select
ENTER
This menu displays some specific information of the diagnostic scanner. After pressing the [ENTER]
key, it appears the following interface.
3
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
System Information
System software:03.00
Diagnostic software:1.00
S/N:OEM0001548
Press [ENTER]
[ENTER] to confirm
2.5 Software Updating Menu
BMW MOTOR
1.System Diagnosis
2. System Information
3. Software Updating
Select
ENTER
This function will be used when updating the software. According to this operation direction, you
can finish the software update process.
Chapter Three
System diagnostic
4
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
3.1 System Diagnostic Introduction
Connect diagnostic connector to the motorcycle diagnostic connector and turn on the ignition
switch. Open the power supply switch of the diagnostic scanner, and enter the following interface.
BMW MOTOR
1.System Diagnosis
2. System Information
3. Software Updating
Select
ENTER
Press the [ENTER] key to enter the following interface.
Diag.
1.SIEMENS SYSTEM
Select
EXIT
3.2 Read Trouble Code
Press [ENTER] key to enter the following interface.
5
ENTER
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
BMW MOTOR
Communication, please wait...
If communication failure with ECU will appear the following interface
BMW MOTOR
Communication failure!
Press [ENTER] to confirm
If communication with motorcycle ECU is successful will enter the following
interface.
SELECT FUNCTION
1. Read DTC
2.
3.
4.
5.
Clear DTC
Read Datastream
Test Unit
Read ECU ID
↑→↓←Select
↑→↓←Select
EXIT
ENTER
Choose【1.Read DTC】,press【ENTER】key it will display following interface.
6
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
BMW
Reading the DTCs,please wait...
When read trouble code finished it will appear the following interface.
BMW
P0105 Intake manifold pressurpressure Sensor
P0110 Intake air temperature sensor
DTC number :2
EXIT
3.3 Clear Trouble Code
Choose【2.Clear DTC】will appear the following interface.
SELECT FUNCTION
1.
2.
3.
4.
5.
Read DTC
DTC
Clear DTC
Read Datastream
Test Unit
Read ECU ID
↑→↓←Select
↑→↓←Select
EXIT
Press[ENTER] key appear the following interface.。
7
ENTER
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
BMW MOTOR
Clearing, please wait...
Later will appear the following interface.
BMW
Clearing has carried out!
Press [ENTER] to confirm
3.4 Read Data Stream
Choose【3.Read Data Stream】enter the following interface.
SELECT FUNCTION
1.
2.
3.
4.
5.
Read DTC
Clear DTC
Read Data Stream
Test Unit
Read ECU ID
↑→↓←Select
↑→↓←Select
EXIT
8
ENTER
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
This function is used to display the current data condition of ECU system. Using this data, you can
estimate the vehicle working condition. Press [ENTER]. After the guide information, it appears the
following interface.
Data stream
AMP
96.6kPa
CRASH
CTR_ERR_DYN_VR
CUR_IGC_DIAG_cyl1
DIST_ACT_MIL
ENG_HOUR
IGA_1
4.9973V
0
0.0000V
0
1.50h
5.156699
←PageUp →PageDown
EXIT
Press【→】key continue to look over other data stream.
3.5 Action Testing
Choose【4.Test Unit】will appear the following interface.
SELECT FUNCTION
1.
2.
3.
4.
Read DTC
Clear DTC
Read Datastream
Datastream
Test Unit
5. Read ECU ID
↑→↓←Select
↑→↓←Select
EXIT
Press【ENTER】key appear the following interface.
9
ENTER
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
Actuator
1. Fuel Injector
2. Ingition
Ingition Coil
3. Fuel Pump
4. MIL
5. All Tests At The Same Time
↑→↓←Select
↑→↓←Select
EXIT
ENTER
Choose【1.Fuel Injector】will appear the following interface.
SELECT FUNCTION
1. ON
2.OFF
↑→↓←Select
↑→↓←Select
EXIT
ENTER
Choose【1.ON】will appear the following interface.
BMW MOTOR
Testing, pleas
please wait…
wait…
The carry out finished will display the following interface.
10
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
BMW MOTOR
Test has carried
carried out!
Press [ENTER] to confirm
3.5Read ECU ID
Choose [5.Test Unit] will appear the following interface.
SELECT FUNCTION
1.
2.
3.
4.
5.
Read DTC
Clear DTC
Read Datastream
Test Unit
Read ECU ID
↑→↓←Select
↑→↓←Select
EXIT
Press【ENTER】key appear the following interface.
BMW MOTOR
Reading the ECU version,Pleasversion,Please wait...
11
ENTER
User Manual of VINASHIN MOTOR EFI fault diagnostic scanner
Later display the following information.
BMW MOTOR
ECU VER:QG0100
Press [ENTER] to confirm
confirm
Appendix I: FAQ and Solution
1. When testing the motorcycle ECU with the diagnostic scanner, it displays “Communication
failure!” what is the problem? How to deal with it?
This problem may be caused by the reasons as below:
1.1 Please check up whether the ignition switch is turn to the “ON” position?。
1.2 Please check up whether the cable between the diagnostic scanner and the diagnostic
connector of motorcycle is connected reliable?
2 After electrifying the diagnostic instrument, press the switch of the mainframe, it displays white
screen or black screen. What is the problem? How to deal with it?
2.1 Maybe you adjusted the adjustable knob of the mainframe by accident to lead the white
screen or black screen of the mainframe. After starting up normally, adjust the adjustable knob on
the top right side of the mainframe screen to make the mainframe display normally.
2.2 Please check up whether the powers supply voltage of the diagnostic scanner
is normal?
12