NEW
RFID System
V680 Series
Next-Generation RFID System
Conforming to ISO/IEC 18000-3
(ISO/IEC 15693).
New ID Sensor Units
for CJ1/CS1 PLCs and New M12 Antenna.
Visualize data transmission on
production lines.
Managing process instructions
and histories for engine
manufacturing
Managing manufacturing process
traceability
Managing the manufacture of LCDs
and color filters
Managing dies, die histories,
and die service lives
Versatile Functions for Optimal
Use on Production Lines
Conforms to ISO/IEC 18000-3 (ISO/IEC 15693)
Can be used in many countries around the world.
The V680 Series can be used in many parts of the world because it meets the requirements of radio wave
regulations in Japan, Europe, the U.S.A., Canada, Mexico, Singapore, Malaysia, the Philippines, China, Hong
Kong, Taiwan, and Korea. Contact your OMRON sales representative for details on use in other countries.
Note: The requirements of radio wave regulations have been met in the countries listed above for combinations of a V680-HA63A or V680-HA63B
Amplifier and a V680-HS52, V680-HS63, or V680-HS65 Antenna (application pending in Mexico). The V680-CH and V680-H01 Antennas and
combinations of a V680-HA63A or V680-HA63B Amplifier and a V680-HS51 Antenna meet the requirements of radio wave regulations in Japan, Europe,
the U.S.A., and Canada. Application is in progress in other countries.
Enables High-speed Data Transmission
High-speed transmission of 27 kbps achieved.
The V680 Series offers data transmission speeds as high as 27 kbps at an operating frequency of 13.56 MHz,
and dramatically shortens turn around time (TAT) with a Self-execution Mode that eliminates the need for host
access.
Self-execution system
ID Tag
transmission time
Judgment and
instruction
Conventional system
Host send (response)
judgment and instruction time
Host send (command) time
Judgment and
instruction
ID Tag
transmission time
TAT
TAT
A Wide Range of ID Tags Available for Various Production Lines
These ultra-compact Tags also feature high environmental durability, long service lives,
and maintenance-free operation.
ID Tags can be either embedded in metal or
mounted on non-metallic objects without requiring
any extra attachments.
A long service life enables 10 billion accesses.
A new battery-less model with a large, 32-Kbyte
capacity has been added to the line-up.
In addition to managing the growing amount
of production and quality data on today's factory floors,
this new Tag makes it easy to build a system with
traceability.
The V680 Series features the same level of environmental
durability as the previous V600 Series.
10
billion
accesses
Long service life
Battery-less
No Changes Needed when Switching from an Existing System
The V680 Series also supports V600-series commands,
so there is no need to change command systems.
Easier Startup and Maintenance.
Simpler Operation.
Lets You Visualize Data Transmission
Contributes to higher efficiency for on-site startup and maintenance.
Seven maintenance modes make it easy to diagnose the optimal usage conditions for the V680 RFID System.
Startup is also easier because the system can be checked without having to use a personal computer or other
host device.
Maintenance modes are
quickly switched with
the DIP switch on the
front of the Controller.
The Amplifier Unit is also
equipped with an indicator that
displays the communications
condition, for easy confirmation
from the location nearest the
production line.
Strong Support for Creating ID Tag Memory Maps
Using the ID Map Manager dramatically shortens the time required to allocate
ID Tag memory and complete system designs.
Work efficiency is greatly increased because the ID Map Manager includes an ID Tag read/write test function
and communications checking function in addition to memory map definition and editing functions.
Memory map data created by the ID Map Manager can also be easily shared between the production line
design department and the vendors that are building the line.
V680-A-IMMEG-P01
Visualize Data Transmission without the Need for a Host Device.
Perform Simple Diagnosis of Communications Conditions.
Distance Level Measurement Mode
Confirms correct mounting positions for the Read/Write Antenna and ID Tag.
The distance between the Read/Write Antenna and ID Tag mounting locations relative to the communications
range is displayed using six levels.
Distance level “--”
Controller
Amplifier Unit
ID Tag
“01”
“02”
“03”
“04”
“05”
“06”
Read/Write
Antenna
Distant
Close
Noise Level Measurement Mode
Confirms spatial noise, noise sources, and noise countermeasure effects.
Measures the ambient noise level and displays it in levels ranging from 00 to 99.
Controller
Read/Write
Antenna
Little noise
Much noise
Speed Level Measurement Mode (Read/Write)
Confirms the speed of moving ID Tags and the number of usable bytes.
Data is transmitted repeatedly to moving ID Tags, and the number of successful communications and speed
level are displayed in levels ranging from 01 to 99.
(No data is actually written to the ID Tags during the write part of the Speed Level Measurement Mode.)
Controller
Movement
ID Tag
Read/Write
Antenna
More than 99 successful
communications
Seven maintenance modes make it easy to diagnose the communications conditions from the front
panel of the Controller or Amplifier Unit. The data can also be output from the USB port of the Controller
to a personal computer or other monitoring device.
(Maintenance Mode cannot be used with the V680-H01 or V680-CH.)
Communications Success Rate Measurement Mode
Confirms the communications success rate between the Read/Write Antenna and ID Tags.
A total of 100 communications are executed without retries, and the rate of communications success is
displayed in levels ranging from 01 to 99.
Controller
ID Tag
100
communications
Read/Write
Antenna
Communications successes: 23
Host Device Communications Monitor Mode (Protocol Analyzer Function)
This mode can be used as a protocol analyzer function for host device communications lines.
The communications commands sent from the host device and the execution result responses can be output
from the USB port of the Controller.
Monitor
Host device
Command:
RDSTH100100010*CR
Monitor:
RDSTH100100010*CR
RD72*CR
Read/Write
Antenna
Personal computer
Programmable Controller
(PLC)
Notebook PC
Response:
RD72*CR
Tag Communications Test Mode
Confirms communications ability between the Read/Write
Antenna and ID Tags.
The end codes are displayed to show the results of communications
between the Read/Write Antenna and ID Tags. When the Controller
is mounted inside a control panel, or in some other location, this
data can be output from the Controller's USB port and easily
checked on a monitor.
(The Tag Communications Test Mode uses only read operations.)
Controller
Normal communication
Communications error
Host Device Communications Confirmation Mode
Confirms whether the signals sent from the Controller are being correctly transferred to an external device.
The communications commands and responses between the Controller and a host device are output from the
Controller's USB port for easy identification of problems, such as incorrect communications parameters or wiring.
RFID System
V680 Series
New, Next-generation
RFID Systems with ISO/IEC 18000-3
(ISO/IEC15693) Compliance
• High-speed, 27-kbps transmission response-only
speed of 53 kbps from the V680-D@KF68.
• Read/Write Antennas and ID Tags with excellent
environmental resistance.
• Wide line-up of ultra-compact, long-life ID Tags, with
capacities from 1 to 32 Kbytes.
• Seven modes make it possible to visualize data
transmission.
• ID Map Manager simplifies memory map designing for
ID Tags.
• Complies with FCC Standards and R&TTE Directive.
System Configuration
ID Tag
1-Kbyte memory
V680-D1KP52MT
(8 dia. × 5 mm)
For embedding in metallic or non-metallic
surface
1-Kbyte memory
V680-D1KP66MT/V680-D1KP66T
(34 × 34 × 3.5 mm)
For flush mounting on metallic surface
1-Kbyte memory
V680-D1KP66T-SP
(96 × 36.5 × 6.5 mm)
For flush mounting on non-metallic surface
2-Kbyte memory
V680-D2KF52M
(8 dia. × 5 mm)
For embedding in metallic or non-metallic
surface
Read/Write Antenna
Amplifier Unit
Controller
For
1-Kbyte ID Tags
V680-HA63A
1-channel type
V680-CA5D01-V2
Amplifier Unit
Special Extension
Cable
V700-A43/-A44
2-channel type
V680-CA5D02-V2
Host Device
Cylinder type
V680-HS52
-W: Standard cable,
waterproof
connector
-R: Flexible cable,
non-waterproof
connector
Cylinder type
V680-HS51
Square type
V680-HS63
For 2-, 8-, or
32-Kbyte ID Tags
V680-HA63B
2-Kbyte memory
V680-D2KF67M/V680-D2KF67
(40 × 40 × 4.5 mm)
For flush mounting on non-metallic surface
Personal
computer
Programmable
Controller
Communications
interfaces
RS-232C, RS-422,
RS-485
ID Sensor Units
CJ1W-V680C11/C12
CS1W-V680C11/C12
SYAMAC
CJ/CS Series
V680-HS65
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
(86 × 54 × 10 mm)
For flush mounting on non-metallic surface
Amplifier Unit
Special Extension
Cable
V700-A43/-A44
-W: Standard cable,
waterproof
connector
-R: Flexible cable,
non-waterproof
connector
Note 1. Use a V680-HS51/-HS52 Antenna if the V680-D1KP52MT or V680-D2KF52M is to be embedded in metal. Communications cannot be performed if a V680HS63 Antenna is used in combination with the V680-D1KP52MT or V680-D2KF52M.
The V680-HS65 Antenna cannot communicate with V680-D1KP52MT or V680-D2KF52M ID Tags if they are embedded in metal.
2. For details, refer to the following User’s Manuals (Cat. No. Z248, Z249, Z262, and Z274).
3. The maximum total cable length is 62.5 m. It is achieved by connecting an Antenna with a 12.5-m cable, an Amplifier with a 10-m cable, and 20-m Amplifier
Unit Special Extension Cables.
6
V680 Series RFID System
ID Tag
Read/Write Antenna
Host Device
Controller
Personal computer
1-channel type
V680-CA5D01-V2
1-Kbyte memory with
high-temperature
capability
V680-D1KP58HT
Programmable
Controller
V680-H01
Communications
interfaces
RS-232C, RS-422,
RS-485
ID Sensor Units
SYAMAC
CJ/CS Series
1-channel type
CJ1W-V680C11
CS1W-V680C11
Special Cable
V700-A40-W
Handheld Reader Writer
1-Kbyte memory
V680-D1KP52MT
V680-CH1D-PSI
RS-232C
interface
V680-D1KP66MT/
V680-D1KP66T
Psion Teklogix 7527S-series
Handheld Terminal for
V680-CH1D-PSI
(Recommended model:
V680-A-7527S-G2-EG-S)
(Connector)
V680-D1KP66T-SP
V680-CHUD
USB interface
Personal computer
2-Kbyte memory
V680-D2KF52M
V680-D2KF67M/
V680-D2KF67
V680-CH1D
8-Kbyte/32-Kbyte
memory
V680-D8KF68/-D32KF68
V600-A22 AC Adapter
(order separately)
Programmable
Controller
RS-232C
interface
(Connector)
System Configuration
Connect V680 Read/Write Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to V680-series ID Tags.
Transmission is also possible with ID Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693).
However, transmission with ID Tags other than those of the V680 Series cannot be assured. The user must confirm transmission capabilities
carefully prior to use.
V680 Series RFID System
7
Ordering Information
ID Tag
Type
Battery-less
Memory capacity
Appearance
1 Kbyte
2 Kbytes
Size
Model
For embedding in metallic V680-D1KP52MT
or non-metallic surface
Square
34 × 34 × 3.5 mm
For flush mounting on
metallic surface
V680-D1KP66MT
For flush mounting on
non-metallic surface
V680-D1KP66T
Square PFA package
95 × 36.5 × 6.5 mm
For flush mounting on
non-metallic surface
V680-D1KP66T-SP
80 dia. × t10 mm
(High-temperature
type)
For flush mounting on
non-metallic surface
V680-D1KP58HT
Cylindrical,
ultra-compact
8 dia. × 5 mm
For embedding in metallic V680-D2KF52M
or non-metallic surface
Square
40 × 40 × 4.5 mm
For flush mounting on
metallic surface
V680-D2KF67M
For flush mounting on
non-metallic surface
V680-D2KF67
For flush mounting on
non-metallic surface
V680-D8KF68
86 × 54 × 10 mm
8 Kbytes
Metallic compatibility
Cylindrical,
ultra-compact
8 dia. × 5 mm
32 Kbytes
V680-D32KF68
Read/Write Antenna (Detachable Amplifier Unit Type)
Type
Cylindrical
Appearance
Size
M22 × 65 mm
Standard cable,
waterproof connector
Flexible cable, nonwaterproof connector
Square
Cable length
Model
2m
V680-HS52-W 2M
12.5 m
V680-HS52-W 12.5M
2m
V680-HS52-R 2M
12.5 m
V680-HS52-R 12.5M
V680-HS51 2M
Standard cable, nonwaterproof connector
M12 × 35 mm
2m
Standard cable,
waterproof connector
40 × 53 × 23 mm
2m
V680-HS63-W 2M
12.5 m
V680-HS63-W 12.5M
2m
V680-HS63-R 2M
Flexible cable, nonwaterproof connector
100 × 100 × 30 mm
Standard cable,
waterproof connector
Flexible cable, nonwaterproof connector
12.5 m
V680-HS63-R 12.5M
2m
V680-HS65-W 2M
12.5 m
V680-HS65-W 12.5M
2m
V680-HS65-R 2M
12.5 m
V680-HS65-R 12.5M
Read/Write Antenna with Built-in Amplifier
Type
Appearance
Size
250 × 200 × 35 mm
Square
Note: Use an Antenna Cable to connect the Read/Write Antenna to the Controller.
The maximum cable length is 30.5 m.
8
V680 Series RFID System
Cable length
0.5 m (See note.)
Model
V680-H01
Amplifier Unit
Type
Appearance
Size
Cable length
25 × 40 × 65 mm
For 1-Kbyte memory
For 2-/8-/32-Kbyte memory
Model
5m
V680-HA63A 5M
10 m
V680-HA63A 10M
5m
V680-HA63B 5M
10 m
V680-HA63B 10M
Note: The maximum extendable cable length is 50 m (including the Amplifier Unit cable). The maximum number of V700-A43/-A44 Amplifier Unit
Special Extension Cables that can be connected is two.
Controller
Type
No. of connectable
Amplifiers
DC power supply
Appearance
Size
Transmission interface
105 × 90 × 65 mm
Single
RS232C,
RS422/RS485
Model
V680-CA5D01-V2
Dual
V680-CA5D02-V2
ID Sensor Units
Type
Unit name
CJ1
Special
I/O Unit
Connected ID System
V680 Series
1 Head
External
No. of unit
Current consumption (A)
power supply numbers used
5V
24 V External
---
2 Heads
Type
Unit name
CS1
Special
I/O Unit
Connected ID System
V680 Series
Model
1 unit number
0.26
0.13
(See
note.)
---
CJ1WV680C11
2 unit number
0.32
0.26
---
CJ1WV680C12
External
No. of unit
power supply numbers used
Current consumption (A)
5V
26 V
Model
External
1 Head
---
1 Head
0.26
0.13
(See
note.)
---
CS1WV680C11
2 Heads
24 VDC
2 Heads
0.32
---
0.36
CS1WV680C12
Note: When connected to the V680-H01: 0.28 A
Handheld Reader Writers
Name
Model
Model with USB connector and 0.8-m cable
V680-CHUD 0.8M
Model with USB connector and 1.9-m cable
V680-CHUD 1.9M
Model with RS-232C connector and 2.5-m cable
(for use with a personal computer or programmable controller)
V680-CH1D
Model with RS-232C connector and 0.8-m cable
(Recommended: Psion Teklogix Handheld Terminal)
V680-CH1D-PSI
AC Adapter (for V680-CH1D)
V600-A22
Psion Teklogix Handheld Terminals
Handheld Terminal Set
Name
Handheld Terminal Set
(English OS)
Psion Teklogix model number
7527S-G2-EG-S
OMRON model number
V680-A-7527S-G2-EG-S
Set contents
Handheld Terminal, RS-232C interface, hand strap, and charger
(standard model)
V680 Series RFID System
9
Accessories (Order Separately)
ID Tag Attachment
Type
Appearance
Model
For the V680-D1KP66T
V600-A86
For the V680-D@KF68
V680-A81
To mount the V680-D1KP58HT
V680-A80
Amplifier Unit Special Extension Cable (Amplifier Unit to Controller)
Cable length
Appearance
Model
10 m
V700-A43 10 M
20 m
V700-A44 20 M
V680-H01 Read/Write Antenna Special Cable (Read/Write Antenna to Controller)
Cable length
Appearance
Model
2m
V700-A40-W 2M
5m
V700-A40-W 5M
10 m
V700-A40-W 10M
20 m
V700-A40-W 20M
30 m
V700-A40-W 30M
Note: The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two cables
together.)
RS-232C Communications Connector
Name
ID Map Manager (for Windows)
Model
Connector Plug
XM3B-0922-111
Connector Hood
XM2S-0911
Type
English version
Note: An RS422/RS485 Communications Connector is provided with the RFID System.
10
V680 Series RFID System
Model
V680-A-IMMEG-P01
Ratings and Performance
ID Tag (1-Kbyte Memory)
Item
Model
V680-D1KP52MT
Memory capacity
1,000 byte (user area)
Memory type
EEPROM
V680-D1KP66T
V680-D1KP66MT
V680-D1KP66T-SP
Data backup time (See note 1.) 10 years after writing (85°C max.)
100,000 times per block (at 25°C)
Memory longevity
Ambient operating temperature −25 to 85°C (with no icing)
(during transmission)
−25 to 70°C (with no icing)
Ambient operating temperature −40 to 125°C (with no icing)
−40 to 110°C (with no
(not during transmission)
Heat resistance: 1,000 thermal cycles each of 30 minutes at −10°C/150°C, High- icing)
temperature storage: 1,000 hours at 150°C (See note 2.)
200 thermal cycles each of 30 minutes at −10°C/180°C, Hightemperature storage: 200 hours at 180°C (See note 3.)
Ambient storage temperature
−40 to 125°C (with no icing)
Ambient operating humidity
35 to 95%
Degree of protection
IEC 60529, IP68
−40 to 110°C (with no
icing)
IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to
IP67g) (See note 4.)
Vibration resistance
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
8 dia. × 5 mm
34 × 34 × 3.5 mm
95 × 36.5 × 6.5 mm
(excluding protrusions)
Materials
Case: PPS resin
Filling: Epoxy resin
Molding: PPS resin
External resin: PFA
Tag body: PPS resin
Weight
Approx. 0.5 g
Approx. 6 g
Approx. 7.5 g
Approx. 20 g
Metallic compatibility
Yes
No
Yes
No
Note 1. Refer to the User's Manual (Cat. No. Z262) for data backup time for temperatures of 85°C or higher. If the V680 has been stored at 125°C
or higher, write the data again even if the data does not need to be changed.
2. 150°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has been checked
through testing 1,000 thermal cycles each of 30 minutes at −10/150°C. (Test samples: 22, defects: 0)
3. 180°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has been checked through
testing 200 thermal cycles each of 30 minutes at −10°C/180°C. (Test samples: 22, defects: 0)
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
5. For details, refer to the User's Manual (Cat. No. Z262).
ID Tag with 1-Kbyte Memory with High-temperature Capability
Item
Model
V680-D1KP58HT
Memory capacity
1,000 byte (user area)
Memory type
EEPROM
Data backup time
10 years after writing (See note.)
Memory longevity
100,000 times per block (at 85°C)
Ambient operating temperature −10 to 85°C (with no icing)
(during transmission)
Ambient operating temperature −40 to 110°C (with no icing)
(not during transmission)
Heat resistance: 2,000 thermal cycles each of 30 minutes at room temperature/200°C (Refer to Heat
Resistance, below, for details.)
Ambient storage temperature
−40 to 110°C (with no icing)
Ambient operating humidity
No limits.
Degree of protection
IEC 60529, IP67
Vibration resistance
10 to 2,000 Hz, 3.0-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Materials
PPS resin
Weight
Approx. 90 g
Note: The data storage time at high temperatures (110 to 200°C) is 10 hours. Rewrite the data before 10 hours has lapsed.
V680 Series RFID System
11
Heat Resistance
Sufficient heat resistance has been confirmed by evaluation testing comprising 2,000 thermal cycles each of 30 minutes at room temperature/
200°C (Criterion: LTPD 10%).
The lifetime of the V680-D1KP58HT is affected by high-temperature storage, due to the effects of high temperatures on internal components. For
details on the relationship between heat resistance and lifetime, refer to the User's Manual (Cat. No. Z221).
ID Tag (2-Kbyte Memory)
Item
Model
V680-D2KF52M
Memory capacity
2,000 bytes (user area)
Memory type
FRAM
V680-D2KF67
V680-D1KF67M
Data backup time (See note 1.) 10 years after writing (55°C or less)
Memory longevity
10 billion times per block. Access frequency (See note 2.): 10 billion times
Ambient operating
temperature
−25 to 85°C (with no icing)
Ambient storage temperature
−40 to 85°C (with no icing)
Ambient operating humidity
35 to 95%
Degree of protection
IEC 60529, IP67
35 to 85%
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Vibration resistance
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
8 dia. × 5 mm
40 × 40 × 4.5 mm
Materials
Case: PPS resin
Filling: Epoxy resin
Molding: ABS resin
Filling: Epoxy resin
Weight
Approx. 0.5 g
Approx. 6.5 g
Approx. 7 g
Metallic compatibility
Yes
No
Yes
Note 1. Refer to the User's Manual (Cat. No. Z248) for data backup time for temperatures of 55°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
ID Tag with 8-/32-Kbyte Memory
Item
Model
V680-D8KF68
Memory capacity
8,192 bytes (user area)
Memory type
FRAM
V680-D32KF68
32,744 bytes (user area)
Data backup time (See note 1.) 10 years (at 70°C max.) after data is written
Memory longevity
10 billion times per block at 85°C max. Access frequency (See note 2.): 10 billion times
Ambient operating
temperature
−20 to 85°C (with no icing)
Ambient storage temperature
−40 to 85°C (with no icing)
Ambient operating humidity
35 to 85%
Degree of protection
IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Vibration resistance
10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Dimensions
86 × 54 × 10 mm
Materials
Case: PBT resin
Filling: Epoxy resin
Weight
Approx. 50 g
Metallic compatibility
No
Note 1. Refer to the User’s Manual (Cat. No. Z248) for data backup time for temperatures of 70°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
12
V680 Series RFID System
Cylindrical Read/Write Antenna (Detachable Amplifier Unit Type)
Model
Item
Ambient operating temperature
V680-HS52-W
(Standard Cable, Waterproof
Connector)
V680-HS52-R
(Flexible Cable, Non-waterproof
Connector)
V680-HS51
(Standard Cable, Non-waterproof
Connector)
−10 to 60°C (with no icing)
Ambient storage temperature
−25 to 75°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC60529)
In-house standard for antenna oil
resistance (former JEM standard
equivalent to IP67g) (Read/Write
Antenna portion) (See note 1.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
10 to 2,000 Hz variable vibration, 1.5mm double amplitude at 150 m/s2
acceleration, with 10 sweeps in X, Y,
and Z directions for 15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
1,000 m/s2 in X, Y, and Z directions 3
times each (18 times in total)
Appearance
M22 × 65 mm
M12 × 35 mm
Materials
ABS, brass, epoxy resin filling
Weight
Approx. 850 g (with 12.5-m cable)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM standard equivalent
to IP67g) (Read/Write Antenna portion) (See note 2.)
Approx. 55 g (with 2-m cable)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It
is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Square Read/Write Antenna (Detachable Amplifier Unit Type)
Model
Item
Ambient operating temperature
V680-HS63-W
(Standard Cable, Waterproof Connector)
V680-HS63-R
(Flexible Cable, Non-waterproof Connector)
−10 to 60°C (with no icing)
Ambient storage temperature
−25 to 75°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 1.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
40 × 53 × 23 mm
Materials
ABS, epoxy resin filling
Weight
Approx. 850 g (with 12.5-m cable)
Model
Item
Ambient operating temperature
V680-HS65-W
(Standard Cable, Waterproof Connector)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 2.)
V680-HS65-R
(Flexible Cable, Non-waterproof Connector)
−25 to 70°C (with no icing)
Ambient storage temperature
−40 to 85°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
In-house standard for antenna oil resistance (former JEM In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 1.)
portion) (See note 2.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
100 × 100 × 30 mm
Materials
ABS, epoxy resin filling
Weight
Approx. 1,100 g (with 12.5-m cable)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It
is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
V680 Series RFID System
13
Square Read/Write Antenna with Built-in Amplifier
Item
Model
V680-H01
Ambient operating temperature −10 to 55°C (with no icing)
Ambient storage temperature
−35 to 65°C (with no icing)
Ambient operating humidity
35% to 85% (with no condensation)
Ambient storage humidity
35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. (at 100 VDC) between the back plate and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the back plate and the case with a current leakage of 1 mA max.
Degree of protection
IEC 60529: IP63 (Mounting direction: Transmission surface facing up)
Vibration resistance
10 to 150 Hz variable vibration, 0.7-mm double amplitude with 4 sweeps in X, Y, and Z directions for 8 minutes
each
Shock resistance
150 m/s2 in X, Y, and Z directions 3 times each
Weight
Approx. 900 g
Cable length
0.5 m (See note 1.)
Note 1. Use an Antenna Cable to connect the Read/Write Antenna to the Controller.
The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two
cables together.)
2. For details, refer to the User’s Manual (Cat. No. Z221).
Amplifier Unit
Item
Model
V680-HA63A
V680-HA63B
Ambient operating temperature −10 to 55°C (with no icing)
Ambient storage temperature
−25 to 65°C (with no icing)
Ambient operating humidity
35% to 85% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA
max.
Degree of protection
IP40 (IEC60529) (See note 1.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y,
and Z directions for 11 minutes each
IP67/IP65 (IEC60529) (See note 2.)
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
25 × 40 × 65 mm (not including projections)
Material
Polycarbonate (PC) resin
Weight
Approx. 650 g (with 10-m cable)
Cable length
5 m, 10 m (See note 3.)
Transmittable ID Tags
1-Kbyte memory
2-, 8-, 32-Kbyte memory
Note 1. When connected to the V680-HS63-R or V680-HS52-R.
2. When connected to the V680-HS63-W or V680-HS52-W. (Not including the Connector on the Controller.)
3. The maximum extendable cable length is 50 m (including the Amplifier Unit Cable). The maximum number of cables that can be connected
is two.
4. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
14
V680 Series RFID System
Controller
Item
Model
Power supply voltage
Power consumption
V680-CA5D01-V2
V680-CA5D02-V2
24 VDC (−15% to +10%)
15 W max., 0.8 A max.
Ambient operating temperature
−10 to 55°C (with no icing)
Ambient operating humidity
25% to 85% (with no condensation)
Ambient storage temperature
−25 to 65°C (with no icing)
Ambient storage humidity
25% to 85% (with no condensation)
Insulation resistance
20 M Ω min. (at 500 VDC) applied as follows:
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Degree of protection
Panel mounted (equivalent to IP20)
Vibration resistance
10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2 acceleration, with 10
sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance
150 m/s2
Appearance
105 × 90 × 65 mm (not including projections)
Material
Polycarbonate (PC) resin, ABS resin
Weight
Approx. 300 g
Mounting method
DIN Track or M4 screws
Connectable Amplifier Units
1
2
Note: For details, refer to the User's Manual (Cat. No. Z249).
ID Controller Communications Specifications
Item
Specifications
RS-232C
RS-422/RS-485
Connector specifications
9-pin D-Sub connector with threaded socket: 5-pin connector mfd. by Phoenix Contact:
M2.6
MC1.5/5GF-3.5
Transmission method
Half-duplex serial
Transmission speed
9,600/19,200/38,400/115,200 bps
Data length
7 or 8 bits
Stop bit length
1 or 2 bits
Error detection
Parity (even/odd/none)
Cable length
15 m max.
ID Controller Input Specifications
(RST, TRG1, and TRG2)
Input voltage
24 VDC (+10% to −15%, including ripple)
(PNP and NPN compatible)
Input impedance
2.2 kΩ
Input current
ON voltage
4-wire/2-wire half-duplex serial
500 m max.
ID Controller Output Specifications
(RUN, BUSY/OUTS, ERROR/OUT4, OUT1,
and OUT2)
10 mA TYP (24 VDC)
Maximum
switching
capacity
24 VDC (+10% to −15%, including ripple)
100-mA photoMOS output (PNP and NPN
compatible)
19 V min.
Leakage current
100 µA max.
OFF voltage
5 V max.
Residual voltage 2.0 V max.
Input response
70 ms max.
Note 1. When RST input is ON, the CPU halts operation and the RST
LED lights. The ERROR output is then reset.
2. Short-circuiting in a no-load condition may cause transistor
damage.
■ USB Port
The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable
uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.
When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.
The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.
V680 Series RFID System
15
ID Sensor Units
Item
Model
CJ1W-V680C11
Current
Internal: 5 V
consumption
Internal:
24 V/26 V
External: 24 V
CJ1W-V680C12
CS1W-V680C11
CS1W-V680C12
260 mA
320 mA
260 mA
320 mA
130 mA (See note.)
260 mA
125 mA (See note.)
---
---
---
---
360 mA
Dielectric strength
1,000 VAC for 1 minute
Insulation resistance
20 mΩ min. at 500 VDC
Ambient operating
temperature
0 to 55°C
Ambient operating humidity
10% to 90% (with no condensation)
Ambient storage temperature
−20 to 75°C
Degree of protection
Mounted in panel (IP30)
Vibration resistance
10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance
147 m/s2 in X, Y, and Z directions 3 times each
Appearance
31 × 65 × 90 mm (excluding protrusions)
35 × 130 × 101 mm (excluding protrusions)
Note: When connected to the V680-H01: 280 mA
Functional Specifications of ID Sensor Units
Item
Model
Communications control
protocol
CJ1W-V680C11
CJ1W-V680C12
CS1W-V680C11
CS1W-V680C12
Special protocol for CS1 and CJ1 PLCs
Number of Read/Write Head 1
connections
2
1
2
Commands
Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check,
Number of Writes Control, Copy, Read with Error Correction/Write with Error Correction, UID Read, and Noise
Measurement.
The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO
repeat (See note.), Multi-access trigger, and Multi-access repeat (See note.)
Data transfer quantity
2,048 bytes max. (160 bytes/scan)
Diagnostic function
(1) CPU watchdog timer
(2) Communications error detection with ID Tag
(3) Antenna power supply error
Monitoring/testing
functions
Tag communications can be tested in Test Mode. Status is displayed by LED indicators.
Number of allocated words
10 words
20 words
10 words
20 words
Note 1. Cannot be used for communications with the V680-D1KP@@.
2. For details, refer to the User's Manual (Cat. No. Z248 or Z262).
Handheld Reader Writers
Item
Model
V680-CHUD 0.8M
V680-CHUD 1.9M
V680-CH1D
V680-CH1D-PSI
Power supply voltage
5 VDC±5%
Current consumption
500 mA max. (for a power supply voltage of 5.0 V)
Insulation resistance
50 MΩ min. (at 500 VDC) between connector and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case
Vibration resistance
Destruction: 10 to 150 Hz, 0.2-mm double amplitude, with 10 sweeps for 8 min each in 6 directions
Shock resistance
Destruction: 150 m/s2, 3 times each in X, Y, and Z directions
Ambient operating
temperature during
communication
0 to +40°C
Ambient operating humidity 35% to 85% (with no condensation)
during communication
Ambient storage
temperature
−25 to +65°C
Ambient storage humidity
35% to 85% (with no condensation)
Degree of protection
IEC 60529: IP63 (See note 2.)
Cable length
0.8 m
1.9 m
2.5 m
0.8 m
Weight
Approx. 110 g
(including connector and
cable)
Approx. 140 g
(including connector and
cable)
Approx. 170 g
(including connector and
cable)
Approx. 120 g
(including connector and
cable)
Note 1. Refer to the User's Manual (Cat. No. Z272) for details.
2. This does not include the connector section. The main unit is not resistant to chemical or oils.
16
V680 Series RFID System
AC Adapter (for V680-CH1D)
Item
Model
V600-A22
Input voltage
100 to 120 VAC at 50/60 Hz
Input current
100 VAC: 200 mA ±20%, 120 VAC: 170 mA ±20%
Output voltage
5 VDC ±0.25 V
Ambient operating
temperature
0 to 40°C (with no icing)
Ambient storage
temperature
−40 to 70°C (with no icing)
Ambient operating
humidity
25% to 85% (with no condensation)
Insulation resistance 100 MΩ min. (at 500 VDC) between input terminals and output terminals
Dielectric strength
1,500 V for 1 minute between input terminals and output terminals with a current leakage of 5 mA max.
Weight
Approx. 85 g
Applicable standards UL/CSA
RS-232C interface
Host Communications Interface
Specifications
USB interface
Item
Model
Item
Model
V680-CH1D
Connector
D-SUB 9-pin
(compatible with IBM
PC/AT or compatible)
(See note 1.)
RS-232C
V680-CHUD
Interface connector
Series A plug
USB version
Ver 1.1
Standards
Communications
speed
Full speed (12 Mbps)
Transmission
1:1
path connections
Device class
COM class (See note.)
Communications 2-wire half-duplex
method
Note: Used as the COM port on the host device.
V680-CH1D-PSI
D-SUB 9-pin
Synchronization
Start-stop (stop bits = 1 or 2) (See note 2.)
Baud rate
2,400, 4,800, 9,600, 19,200, or 38,400 bps (See
note 2.)
Transmission
code
ASCII (7-bit) or JIS8 (See note 2.)
Communications 1:1 protocol
control
procedure
Error detection
Vertical parity (even, odd, or none) (See note 2.)
Note 1. To convert to a 25-pin connector, use the Sunhayato SGC-X9P/25P-2 or the equivalent.
2. Set using a setting command.
■ Psion Teklogix Handheld Terminals Recommended for the V680-CH1D-PSI
A V680-CH1D-PSI Psion Teklogix Handheld Terminals is recommended for the V680 Handheld Reader Writer. This Handheld Terminal is
available from OMRON.
■ Ordering Information
Psion Teklogix Handheld Terminals
Handheld Terminal Set
Name
Handheld Terminal Set
(English OS)
Psion Teklogix model
number
7527S-G2-EG-S
OMRON model number
V680-A-7527S-G2-EG-S
Configuration
Handheld Terminal, RS-232C
interface, hand strap, and
charger (standard model)
Handheld Terminal Only
Name
Handheld Terminal
(English OS)
Appearance
Size
90 × 210 × 42 mm
Psion Teklogix
model number
7527S-G2-EG
OMRON model number
V680-A-7527S-G2-EG
Configuration
Handheld Terminal,
RS-232C interface,
and hand strap
V680 Series RFID System
17
Handheld Terminal Accessories
Name
Appearance
Size
Psion Teklogix model number OMRON model number
High-capacity Battery
55 × 35 × 18 mm
WA3006
V680-A-WA3006
Charger
(standard model)
Adapter: 48 × 70 × 27 mm
Cable: 1,800 mm
CA1053
V680-A-CA1053
Charger
(advanced model)
Charger: 168 × 185 × 110 mm
Enclosed USB cable: 1,500 mm
WA4003
V680-A-WA4003
Carrying Case
Handheld Reader Writer Cover:
85 × 200 × 50 mm
Strap: 150 mm
WA6197
V680-A-WA6197
18
V680 Series RFID System
■ Ratings and Specifications
Psion Teklogix Handheld Terminal
Model
Psion Teklogix model 7527S-G2-EG
(V680-A-7527S-G2-EG)
Item
OS
Windows CE 5.0
OS language
English
CPU
EXA2705 (520 MHz)
Memory
Flash ROM: 128 MB, RAM: 128 MB
Display
Color, 1/4 VGA, 240×320
Keyboard
Alphanumeric
Card slots
One CF (Type II Compact Flash) slot and one SD memory card slot
Power supply (main battery) One high-capacity lithium ion battery (3,000 mA/h at 3.7 V)
Host communications
interface
RS-232C (Can be connected to the V680-CH1D-PSI.)
Ambient operating
temperature
−10 to 50°C
Ambient operating humidity 5% to 95% (with no condensation)
Ambient storage
temperature
−40 to 60°C
Drop strength
1.5 m on concrete
Degree of protection
IP65 (IEC 60529)
Dimensions
210 × 90 × 42 mm
Weight
390 g (excluding battery)
Standards
CE, UL 60950-1, CSA C22.2 No. 60950-1 CCC, and RoHS (AC Adapter for the charger)
Note: The Easy Access demonstration software is preinstalled on the V680 and V600.
Charger (Standard Model)
Model
Psion Teklogix model CA1053
(V680-A-CA1053)
Item
Input voltage
100 to 240 VAC at 50/60 Hz
Input current
0.6 A
Ambient operating
temperature
−10 to 50°C
Ambient storage
temperature
−25 to 65°C
Insulation resistance
2 kΩ
Dielectric strength
450 V
Weight
Approx. 362 g
Applicable standards
UL/CSA, CE
V680 Series RFID System
19
■ Performance Specifications
ID Tag (1-kbyte Memory) Transmission
Recommended combination
ID Tag
V680-D1KP52MT
Function
Read/Write Antenna
V680-HS52
Transmission distance
(unit: mm)
Read
distance
0 to 9.0 mm
(axial deviation ±2)
Write
distance
0 to 8.5 mm
(axial deviation ±2)
ID Tag and Read/Write Antenna mounting
conditions
V680-D1KP52MT
V680-HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-HS51
V680-D1KP52MT
(embedded in metallic
surface: steel)
V680-HS52
Read
distance
0.5 to 6.5 mm
(axial deviation ±2)
Write
distance
0.5 to 6.0 mm
(axial deviation ±2)
Read
distance
V680-D1KP52MT
Non-metallic
(Resin, plastic, wood, etc.)
V680HS51
Metallic
0 to 4.5 mm
(axial deviation ±2)
Metallic
V680-HS52
Write
distance
0 to 4.0 mm
(axial deviation ±2)
V680-D1KP52MT
Non-metallic
V680-HS51
Read
distance
0.5 to 3.5 mm
(axial deviation ±2)
Metallic
V680HS51
Write
distance
0.5 to 3.5 mm
(axial deviation ±2)
Metallic
V680-D1KP52MT
V680-D1KP52MT
V680-HS63
Read
distance
0 to 12.0 mm
(axial deviation ±2)
Write
distance
0 to 9.5 mm
(axial deviation ±2)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D1KP52MT
Non-metallic
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the
User's Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
20
V680 Series RFID System
Recommended combination
ID Tag
V680-D1KP66T
Function
Read/Write Antenna
V680-HS52
Transmission distance
(unit: mm)
Read
distance
0 to 17.0 mm
(axial deviation ±2)
(See note 2.)
Write
distance
0 to 17.0 mm
(axial deviation ±2)
(See note 2.)
ID Tag and Read/Write Antenna mounting
conditions
V680-D1KP66T
V680-HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-HS63
Read
distance
0 to 30.0 mm
(axial deviation ±10)
(See note 2.)
Write
distance
0 to 25.0 mm
(axial deviation ±10)
(See note 2.)
Read
distance
0 to 47.0 mm
(axial deviation ±10)
(See note 2.)
Write
distance
0 to 42.0 mm
(axial deviation ±10)
(See note 2.)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D1KP66T
Non-metallic
V680-HS65
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
V680D1KP66T
Metallic
V680-D1KP66MT
(flush-mounted on
metallic surface: steel)
V680-HS52
Read
distance
0 to 16.0 mm
(axial deviation ±2)
Write
distance
0 to 14.0 mm
(axial deviation ±2)
Read
distance
0 to 25.0 mm
(axial deviation ±10)
Write
distance
0 to 20.0 mm
(axial deviation ±10)
Read
distance
0 to 25.0 mm
(axial deviation ±10)
V680-D1KP66MT
V680-HS52
Non-metallic
V680-HS63
Metallic
V680-HS63
Metallic
V680D1KP66MT
Non-metallic
V680-HS65
Write
distance
V680-HS65
Metallic
0 to 20.0 mm
(axial deviation ±10)
Metallic
V680D1KP66MT
V680 Series RFID System
21
Recommended combination
ID Tag
V680-D1KP66T-SP
Function
Read/Write Antenna
V680-HS52
Read
distance
Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
0 to 17.0 mm
(axial deviation ±2)
V680-D1KP66T-SP
Non-metallic
(Resin, plastic, wood, etc.)
Write
distance
V680HS52
0 to 17.0 mm
(axial deviation ±2)
Non-metallic
V680-HS63
Read
distance
Write
distance
0 to 30.0 mm
(axial deviation ±10)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
0 to 25.0 mm
(axial deviation ±10)
V680D1KP66T-SP
Non-metallic
V680-HS65
Read
distance
0 to 47.0 mm
(axial deviation ±10)
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
Write
distance
0 to 42.0 mm
(axial deviation ±10)
Read
distance
0 to 150 mm
(See note.)
V680D1KP66T-SP
Metallic
V680-D1KP58HT
V680-H01
V680-H01
Write
distance
V680-D1KP58HT
Non-metallic
(Resin, plastic,
wood, etc.)
Nonmetallic
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the
User's Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
22
V680 Series RFID System
ID Tag (2-kbyte Memory) Transmission
Recommended combination
ID Tag
V680-D2KF52M
Function
Read/Write Antenna
V680-HS52
Transmission distance
(unit: mm)
Read
distance
0 to 8.0 mm
(axial deviation ±2)
Write
distance
0 to 8.0 mm
(axial deviation ±2)
ID Tag and Read/Write Antenna mounting
conditions
V680-D2KF52M
V680-HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-HS51
Read
distance
0.5 to 5.5 mm
(axial deviation ±2)
V680-D2KF52M
Non-metallic
(Resin, plastic, wood, etc.)
Write
distance
0.5 to 5.5 mm
(axial deviation ±2)
Read
distance
0 to 3.0 mm
(axial deviation ±2)
V680HS51
Metallic
V680-D2KF52M
(embedded in metallic
surface: steel)
V680-HS52
Metallic
V680-HS52
Write
distance
0 to 3.0 mm
(axial deviation ±2)
Non-metallic
V680-HS51
Read
distance
V680-D2KF52M
0 to 3.5 mm
(axial deviation ±2)
Metallic
V680HS51
Write
distance
0 to 3.5 mm
(axial deviation ±2)
Metallic
V680-D2KF52M
V680-D2KF52M
V680-HS63
Read
distance
0 to 9.5 mm
(axial deviation ±2)
Write
distance
0 to 9.5 mm
(axial deviation ±2)
Read
distance
0 to 17.0 mm
(axial deviation ±2)
(See note.)
Write
distance
0 to 17.0 mm
(axial deviation ±2)
(See note.)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D2KF52M
Non-metallic
V680-D2KF67
V680-HS52
V680-D2KF67
V680-HS52
V680-HS63
Read
distance
7 to 30.0 mm
(axial deviation ±10)
(See note.)
Write
distance
7 to 30.0 mm
(axial deviation ±10)
(See note.)
Read
distance
0 to 42.0 mm
(axial deviation ±10)
(See note.)
Write
distance
0 to 42.0 mm
(axial deviation ±10)
(See note.)
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D2KF67
Non-metallic
V680-HS65
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
V680D2KF67
Metallic
V680 Series RFID System
23
Recommended combination
ID Tag
Function
Read/Write Antenna
V680-D2KF67M (flush- V680-HS52
mounted on metallic
surface: steel)
Read
distance
Write
distance
Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
0 to 16.0 mm
(axial deviation ±2)
V680-D2KF67M
Metallic
V680-HS52
0 to 16.0 mm
(axial deviation ±2)
Non-metallic
V680-HS63
Read
distance
6 to 25.0 mm
(axial deviation ±10)
Write
distance
6 to 25.0 mm
(axial deviation ±10)
Read
distance
0 to 25.0 mm
(axial deviation ±10)
Write
distance
0 to 25.0 mm
(axial deviation ±10)
Iron
V680-HS63
Metallic
V680D2KF67M
Non-metallic
V680-HS65
V680-HS65
Metallic
V680D2KF67M
Metallic
ID Tag (8-/32-Kbyte Memory) Transmission
Recommended combination
ID Tag
V680-D8KF68/
-D32KF68
Function
Read/Write Antenna
V680-HS63
Transmission distance
(unit: mm)
Read
distance
0 to 45.0 mm
(axial deviation ±10)
(See note.)
Write
distance
0 to 45.0 mm
(axial deviation ±10)
(See note.)
Read
distance
0 to 75.0 mm
(axial deviation ±10)
(See note.)
ID Tag and Read/Write Antenna mounting
conditions
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D@KF68
Metallic
V680-HS65
Write
distance
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
0 to 75.0 mm
(axial deviation ±10)
(See note.)
V680D@KF68
Metallic
V680-HS63
V680-D8KF68/
-D32KF68
(Special attachment
provided; flush-mounted
on metallic surface:
steel)
Read
distance
0 to 35.0 mm
(axial deviation ±10)
Write
distance
0 to 35.0 mm
(axial deviation ±10)
V680-HS63
Metallic
Metallic
V680-HS65
V680-A81
(ID Tag Attachment)
Read
distance
0 to 55.0 mm
(axial deviation ±10)
V680-HS65
V680D@KF68
V680-A81
(ID Tag Attachment)
Metallic
Write
distance
0 to 55.0 mm
(axial deviation ±10)
Metallic
V680D@KF68
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
Note: The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the User's
Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
24
V680 Series RFID System
Handheld Reader Writer Communications Specifications
ID Tags
Communications distance
Read
Write
V680-D1KP52MT
0 to 9.0 mm
0 to 7.5 mm
V680-D1KP52MT
(embedded in metal: steel)
0 to 3.0 mm
0 to 2.5 mm
V680-D1KP66MT
0 to 21.0 mm
0 to 18.0 mm
V680-D1KP66T
0 to 27.0 mm
0 to 25.0 mm
V680-D1KP58HT
0 to 19.0 mm
0 to 17.0 mm
V680-D1KP66T-SP
0 to 25.0 mm
0 to 23.0 mm
V680-D2KF52M
0 to 7.0 mm
0 to 7.0 mm
V680-D2KF52M
(embedded in metal: steel)
0 to 2.0 mm
0 to 2.0 mm
0 to 22.0 mm
V680-D2KF67M
0 to 22.0 mm
V680-D2KF67
0 to 28.0 mm
0 to 28.0 mm
V680-D8KF68
0 to 32.0 mm
0 to 32.0 mm
V680-D32KF68
0 to 32.0 mm
0 to 32.0 mm
Note: ID Tag Mounting Conditions
•
•
•
•
•
•
•
•
•
•
V680-D1KP52MT: Embedded in resin or steel.
V680-D1KP66MT: ID Tag mounted with steel on back surface.
V680-D1KP66T: ID Tag mounted on resin surface (no metal on back surface).
V680-D1KP58HT: ID Tag mounted on resin surface (no metal on back surface).
V680-D1KP66T-SP: ID Tag mounted on resin surface (no metal on back surface).
V680-D2KF52M: Embedded in resin or steel.
V680-D2KF67M: ID Tag mounted with steel on back surface.
V680-D2KF67: ID Tag mounted on resin (no metal on back surface).
V680-D8KF68: ID Tag mounted on resin (no metal on back surface).
V680-D32KF68: ID Tag mounted on resin (no metal on back surface).
Characteristic Data (Typical)
Transmission Range
(unit: mm)
1-kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to pages 20 to 22 for communications distance specifications.
The communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Write
Read
Y
Y
50
40
X
30
−40
−30
−20
−10
Y
50
40
−50
Write
Read
Y
X
30
20
20
10
10
0
10
20
30
40
X
−50
−40
−30
−20
−10
0
10
20
30
V680 Series RFID System
40
X
25
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Y
Y
Y
50
50
40
40
X
30
−50
−40
−30
−20
20
20
10
10
−10
0
10
20
30
40
X
−50
−40
−30
−20
−10
Y
20
20
10
10
0
10
20
30
40
−50
X
−40
−30
−20
−10
0
20
30
Read
Y
60
20
40
10
20
0
10
20
30
40
X
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T-SP
−100
−80
−60
−40
−20
0
20
40
Write
Read
60
Y
50
Y
40
40
X
26
−10
Write
Read
Y
50
−20
X
80
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T-SP
Y
−30
Write
80
X
30
−40
X
100
40
−50
40
Y
50
−10
10
V680-HS65 (mounted on metallic material) &
V680-D1KP66T
Write
Read
−20
Write
X
30
X
Y
−30
X
Y
50
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T
−40
40
40
30
−50
30
Read
40
−10
20
Y
50
−20
10
Write
Read
−30
0
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T
Y
−40
X
30
V680-HS63 (mounted on non-metallic material) &
V680-D1KP52MT
−50
Write
Read
Write
Read
Y
X
30
30
20
20
10
10
0
10
20
30
V680 Series RFID System
40
X
−50
−40
−30
−20
−10
0
10
20
30
40
X
V680-HS65 (mounted on metallic material) &
V680-D1KP66T-SP
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66MT (flush-mounted on metallic surface: steel)
−100
−80
−60
−40
Y
100
50
80
40
60
30
40
20
20
10
−20
0
20
40
60
X
80
Write
Read
Write
Read
Y
−50
−40
−30
−20
−10
Y
X
0
10
20
30
40
X
V680-HS63 (mounted on non-metallic material) &
V680-HS65 (mounted on metallic material) &
V680-D1KP66MT (flush-mounted on metallic surface: steel) V680-D1K66MT (flush-mounted on metallic surface: steel)
Read
Write
Read
Y
50
100
80
40
X
30
−50
−40
−30
−20
60
20
40
10
20
−10
Write
Y
Y
0
10
20
30
40
X
−100
−80
−60
−40
−20
0
20
40
60
80
X
V680-H01 (mounted on non-metallic material) &
V680-D1KP58HT
Write
Read
Y
200
Y
150
Tag
X
V680-H01
100
50
−250 −200
−150
−100
−50
0
50
100
150
200
X
V680 Series RFID System
27
2-kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to pages 23 to 24 for communications distance specifications. The
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
Write
Read
Y
60
60
Y
50
−50
−40
−30
−20
40
X
30
30
20
20
10
10
−10
0
10
20
30
40
50
60
X
V680-HS51 (embedded in metallic material) &
V680-D2KF52M
−70 −60
−50
−40
−30
−20
−10
Y
30
40
30
X
20
20
10
10
0
10
20
30
40
X
−50
−40
−30
−20
−10
0
10
20
30
X
Write
Read
60
Y
50
Y
50
40
40
X
X
30
30
20
20
10
10
−10
40
Y
60
−20
Write
X
Write
Read
−30
X
V680-HS52 (embedded in metallic material) & V680-D2KF67
Y
−40
60
40
V680-HS63 (mounted on non-metallic material) &
V680-D2KF52M
−70 −60 −50
50
Y
50
30
−10
20
Read
40
−20
10
Y
50
−30
0
Write
Read
−40
X
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
Y
−50
Y
50
40
−70 −60
Write
Read
Y
0
10
20
30
40
50
60
X
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67
−70 −60
−50
−40
−30
−20
−10
10
20
30
40
50
60
X
Write
Read
Write
Read
Y
90
Y
Y
60
0
V680-HS65 (mounted on metallic material) & V680-D2KF67
80
50
70
60
40
X
50
30
40
20
30
20
10
−70 −60
28
−50
−40
−30
−20
−10
10
0
10
20
30
40
V680 Series RFID System
50
60
X
−100
−80
−60
−40
−20
0
20
40
60
80
X
V680-HS52 (embedded in non-metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
Write
Read
Y
60
50
40
−50
−40
−30
−20
−10
Y
60
Y
50
−70 −60
Write
Read
Y
40
X
30
30
20
20
10
10
0
10
20
30
40
50
60
X
−70 −60
−50
−40
−30
−20
−10
X
0
10
20
30
40
50
60
X
V680-HS65 (mounted on metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
Read
Write
Y
90
80
70
60
50
40
30
20
10
−100
−80
−60
−40
−20
0
20
40
60
80
X
V680 Series RFID System
29
8-/32-Kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to page 24 for communications distance specifications. The
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
Write
Read
Y
70
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Vertical-facing ID Tag)
60
50
X
40
40
30
30
20
20
10
10
0
10
20
30
40
50
60
70
X
V680-HS63 (mounted on metallic material) & V680-D8KF68/
-D32KF68
Flush-mounted on metallic surface: steel (Horizontalfacing ID Tag) When the V680-A81 ID Tag Attachment is
mounted.
−80 −70 −60 −50
−40 −30 −20 −10
−20
30
30
20
20
10
10
0
10
20
30
40
50
60
70
X
30
−40
−20
0
70
X
Write
−30 −20 −10
20
40
60
60
20
30
40
80
100
80
120 X
V680 Series RFID System
70
X
Write
−120 −100
−80
−60
−40
−20
0
X
20
40
60
80
100
120 X
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic
surface: steel (Vertical-facing ID Tag) When the V680-A81
ID Tag Attachment is mounted.
Read
Y
110
100
90
80
70
60
50
40
30
20
10
120 X
60
Y
Write
100
50
Read
X
40
10
Y
110
100
90
80
70
60
50
40
30
20
10
Y
20
0
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Vertical-facing ID Tag)
X
Read
−60
−80 −70 −60 −50 −40
Y
Y
110
100
90
80
70
60
50
40
30
20
10
−80
60
Y
Write
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic
surface: steel (Horizontal-facing ID Tag) When the V680A81 ID Tag Attachment is mounted.
−120 −100
50
X
40
0
40
50
X
40
Read
−40
30
60
Y
110
100
90
80
70
60
50
40
30
20
10
−60
20
Read
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
−80
10
Y
70
Y
50
−120 −100
0
V680-HS63 (mounted on metallic material) & V680-D8KF68/
-D32KF68
Flush-mounted on metallic surface: steel (Vertical-facing
ID Tag) When the V680-A81 ID Tag Attachment is mounted.
60
−40 −30 −20 −10
X
Write
Read
Y
70
−80 −70 −60 −50
Y
60
50
−80 −70 −60 −50 −40 −30 −20 −10
Write
Read
Y
70
Y
−120 −100
−80
−60
−40
−20
0
Write
Y
X
20
40
60
80
100
120 X
Communications Time
Communications Time between Antennas and Tags
1-Kbyte Memory ID Tag
● Transmission speed: Normal mode
● Transmission speed: High-speed mode
Transmission time (ms)
Transmission time (ms)
V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit)
V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna)
2,500
2,000
Write (verify enabled)
Write
(verify
disabled)
1,500
2,000
Controller or Command
Write
ID Sensor Unit
verification
transmission
setting
speed setting
1,800
1,600
1,400
Write (verify enabled)
Write
(verify
disabled)
1,200
1,000
1,000
800
High-speed
mode
(See notes 1
and 2.)
600
500
400
Read
Read
200
0
200
400
600
800
1,000
1,200
0
200
400
600
Normal mode
800
1,000
Bytes
1,200
Bytes
Transmission
time (ms)
N = Number of
processing
bytes
Read
---
T = 1.3N + 31
Write
Enabled
T = 2.1N + 58
Disabled
T = 1.8N + 56
Read
---
T = 1.0N + 29
Write
Enabled
T = 1.8N + 51
Disabled
T = 1.5N + 47
Note 1. The V680-H01 Read/Write Antenna cannot be
used in high-speed mode.
2. When multi-access or FIFO is selected as the
transmission option, the transmission time will
be the same as in normal mode even when the
transmission speed is set to high-speed mode.
2-Kbyte Memory ID Tag
V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
● Transmission speed: High-speed mode
5,000
4,500
4,000
3,500
Write (verify enabled)
3,000
Write (verify disabled)
2,500
Transmission time (ms)
Transmission time (ms)
● Transmission speed: Normal mode
4,000
Controller or Command
Write
Transmission
ID Sensor Unit
verification
time (ms)
transmission
setting
N = Number of
speed setting
processing bytes
3,500
3,000
Write (verify enabled)
2,500
Normal mode
Write (verify disabled)
2,000
2,000
1,500
Read
1,500
High-speed
mode (See
note.)
Read
1,000
1,000
---
T = 1.2N + 30
Enabled
T = 2.4N + 49
Disabled
T = 1.2N + 49
Read
---
T = 0.9N + 27
Write
Enabled
T = 1.7N + 49
Disabled
T = 0.9N + 41
500
500
0
Read
Write
500
1,000
1,500
2,000
2,500
0
500
1,000
1,500
2,000
2,500
Bytes
Bytes
Note: When multi-access or FIFO is selected as the
transmission option, the transmission time will be
the same as in normal mode even when the
transmission speed is set to high-speed mode.
8-/32-Kbyte Memory ID Tag
● Transmission speed: Normal mode
● Transmission speed: High-speed mode
Transmission time (ms)
Transmission time (ms)
V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
3,500
Write
(verify
disabled)
3,000
Write (verify enabled)
2,500
2,000
Read
1,500
2,500
Controller or Command
Write
Transmission
ID Sensor Unit
verification
time (ms)
transmission
setting
N = Number of
speed setting
processing bytes
2,000
Write (verify enabled)
Normal mode
Write
(verify
disabled)
1,500
High-speed
mode (See
note.)
1,000
Read
1,000
Read
---
Write
Enabled
T = 1.3N + 30
T = 1.6N + 59
Disabled
T = 1.3N + 50
Read
---
T = 0.8N + 25
Write
Enabled
T = 1.1N + 41
Disabled
T = 0.9N + 40
500
500
0
500
1,000
1,500
2,000
2,500
Bytes
0
500
1,000
1,500
2,000
2,500
Bytes
Note: When multi-access or FIFO is selected as the
transmission option, the transmission time will be
the same as in normal mode even when the
transmission speed is set to high-speed mode.
V680 Series RFID System
31
TAT When Using an ID Controller (Reference Values)
TAT (Turn Around Time)
TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a
response is received.
TAT = Command send time + ID Tag transmission time + response receipt time
Command send time:
This is the time required for sending a command from the host
device to the Controller.
It varies depending on the communications speed and format.
ID Tag transmission time: This is the time required for transmission between the Read/Write
Antenna and the ID Tag.
Response receipt time:
For an ordinary command
(Command)
RDA1 · · · · *CR
This is the time required for returning a response from the
Controller to the host device.
It varies depending on the communications speed and format.
ID Tag
transmission time
RD001234 · · · *CR
Response
TAT
1-Kbyte Memory ID Tag
V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit)
V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna)
Controller or ID Sensor
Unit transmission
speed setting
Normal mode
Command
Read
Write
Write verification
setting
---
Enabled
Disabled
High-speed mode
(See notes 2 and 3.)
Read
Write
---
Enabled
Disabled
Number of bytes to
processed (byte)
TAT (ms) (See note 1.)
100
173
256
389
512
747
1,000
1,431
100
280
256
621
512
1,184
1,000
2,258
100
248
256
542
512
1,028
1,000
1,956
100
141
256
310
512
591
1,000
1,129
100
243
256
537
512
1,023
1,000
1,951
100
209
256
456
512
865
1,000
1,647
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. The V680-H01 Read/Write Antenna cannot be used in high-speed mode.
3. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when
the transmission speed is set to high-speed mode.
4. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
5. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
32
V680 Series RFID System
2-Kbyte Memory ID Tag
V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
Controller or ID Sensor
Unit transmission
speed setting
Normal mode
Command
Read
Write
Write verification
setting
---
Enabled
Disabled
High-speed mode
(See note 2.)
Read
Write
---
Enabled
Disabled
Number of bytes to
processed (byte)
TAT (ms) (See note 1.)
100
162
256
363
512
695
1,000
1,330
2,000
2,620
100
301
256
689
512
1,328
1,000
2,549
2,000
5,039
100
181
256
382
512
714
1,000
1,349
2,000
2,639
100
132
256
286
512
541
1,000
1,030
2,000
2,020
100
231
256
510
512
970
1,000
1,849
2,000
3,639
100
143
256
297
512
552
1,000
1,041
2,000
2,031
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when
the transmission speed is set to high-speed mode.
3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
V680 Series RFID System
33
8-/32-Kbyte Memory ID Tag
V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
Controller or ID Sensor
Unit transmission
speed setting
Normal mode
Command
Read
Write
Write verification
setting
---
Yes
No
High-speed mode
(See note 2.)
Read
Write
---
Yes
No
Number of bytes to
processed (byte)
TAT (ms) (See note 1.)
100
172
256
388
512
746
1,000
1,430
2,000
2,820
100
231
256
494
512
929
1,000
1,759
2,000
3,449
100
192
256
408
512
766
1,000
1,450
2,000
2,840
100
117
256
255
512
485
1,000
925
2,000
1,815
100
163
256
348
512
655
1,000
1,241
2,000
2,431
100
142
256
296
512
551
1,000
1,040
2,000
2,030
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when
the transmission speed is set to high-speed mode.
3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
34
V680 Series RFID System
Safety Precautions
• Do not use products that are not waterproof in misty environments.
WARNING
Do not use this product as a detection device to protect
people.
Note: This catalog is intended only to help select the appropriate
product. Be sure to read the User's Manual for usage
precautions prior to using the product.
Precautions for Safe Use
To ensure safety, be sure to follow the following precautions:
1. Do not operate this product in any flammable, explosive, or corrosive gas environment.
2. Do not disassemble, repair, or remodel this product.
3. Tighten the base lock screws and terminal block screws completely.
4. Be sure to use wiring crimp terminals of the specified size.
5. If any cable has a locking mechanism, be sure to check that it has
been locked before using it.
6. The DC power supply must be within the specified rating (24 VDC
+10%/−15%).
7. Do not reverse the power supply connection.
8. Do not insert water, wire, etc., into any of the gaps in the case.
Doing so may cause fire or electric shock.
9. Turn OFF the Controller or ID Sensor Unit power before attaching
or removing the Read/Write Antenna.
10.In the event that the product exhibits any abnormal condition,
immediately stop using the system, turn OFF the power, and contact your OMRON sales representative.
11.Dispose of this product as industrial waste.
12.Be sure to follow any other warnings, cautions, and notices given
in this document.
Precautions for Correct Use
• Do not subject the products to chemicals that adversely affect
product materials.
• When installing the product, tighten screws to the following torque:
Controller:
1.2 N·m max.
ID Sensor Unit:
0.4 N·m
V680-HS51 Read/Write Antenna: 6 N·m
V680-HS52 Read/Write Antenna: 40 N·m
V680-HS63 Read/Write Antenna: 1.2 N·m
V680-HS65 Read/Write Antenna: 1.2 N·m
• When Read/Write Antennas are mounted side-by-side, mutual
interference may reduce the transmission performance. Refer to
the RFID System Amplifier and Antennas/ID Tags User's Manual to
mount them in a way that will prevent mutual interference.
Storage
Store the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The ambient storage temperature is within the range stipulated in
the specifications.
• There are no sudden variations in temperature (no condensation).
• The ambient storage humidity is within the range stipulated in the
specifications.
• No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
Cleaning
Do not use thinner, benzene, acetone, or kerosene for cleaning.
Using these substances may dissolve the resin material and the
case.
Please observe the following precautions to prevent failure to
operate, malfunctions, or undesirable effects on product
performance.
Installation Site
Install the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The ambient operating temperature is within the range stipulated in
the specifications.
• There are no sudden variations in temperature (no condensation).
• The ambient operating humidity is within the range stipulated in the
specifications.
• No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
Installation
• The product uses the 13.56-MHz frequency band to communicate
with ID Tags. Some devices, such as some motors, inverters, and
switching power supplies, generate electromagnetic waves (i.e.,
noise) that can affect communications with ID Tags. If any of these
devices are nearby, communications with ID Tags may be affected
or ID Tags may be destroyed. If the product is to be used near such
devices, check the effects on communications before using the
product.
• To minimize the general influence of noise, observe the following
precautions:
1. Ground any metallic material located around this device to
100 Ω or less.
2. Keep the product away from high voltage and heavy current.
V680 Series RFID System
35
Dimensions
Note: All units are in millimeters unless otherwise indicated.
ID Tag
V680-D1KP52MT/-D2KF52M
V680-D1KP66T/-D1KP66MT
Mounting Hole Dimensions
R0.2
0
dia.
8 −0.1
4-R4
34
4-R3
25 ±0.2
Two, M3
Two,
25 ±0.2
3.5 dia.
25 ±0.2
32
0
5 −0.1
Case material
PPS resin
Filling
Epoxy resin
Two,
6 dia.
32
34
25 ±0.2
3.5 ±0.1
Case material
V680-D1KP66T-SP
PPS resin
V680-D2KF67/-D2KF67M
Mounting Hole Dimensions
4-R6
Two, M3
Mounting Hole Dimensions
Two, 5.5 dia.
(mounting holes)
34
5.2 8
Two, M5
36.5
16
40+0.1
−0.5
34
Mounting reference
surface
16
80±0.2
13.2
1.3
16
Case material
8
PFA resin
0.2
8
32±0.2
2
4.5
40+0.1
−0.5
5.2
80±0.2
95
Case material
ABS resin
Filling
Epoxy resin
V680-D1KP58HT
V680-D8KF68/-D32KF68
60 dia.
80 dia.
Two, 4.5 dia.
mounting holes
32±0.2
8
16
Two, 3.5-dia.
mounting holes
6.5 2.5 max.
13.2
10±0.2
5°
5°
14 dia.
10
Mounting Hole Dimensions
10
2-R2
54
44
44±0.2
Two, M4
76±0.2
86
76
10
5
Coating
Case material
PBT resin
Filling
Epoxy resin
PPS resin
Read/Write Antenna with Detachable Amplifier Unit
V680-HS52-W
Two toothed washers
Two mounting nuts
M22 × 1
35 dia.
Operation
indicator
Insulated cover
30
50
37
14.5 dia.
19.8 dia.
16.5 dia.
7
30
22.5 dia.
V680-HS52-R
Case material
Brass
Transmission surface PBT resin
Ferrite core
Filling
Epoxy resin
Cable
PVC
Case material
Brass
Two toothed washers
Two mounting nuts
M22 × 1
35 dia.
Operation
indicator
Insulated cover
30
50
20
16.5 dia.
7
30
Mounting Hole Dimensions
22.5 dia.
10
14.5 dia.
19.8 dia.
36
Connector
5.5-dia. coaxial cable
47.6
50
57
65
Mounting Hole Dimensions
16.5 dia.
47.6
50
57
65
V680 Series RFID System
16.5 dia.
5.3-dia. coaxial cable
Ferrite core
Connector
Transmission surface PBT resin
Filling
Epoxy resin
Cable
PVC
V680-HS51
Toothed washer
M12 × 1
Two mounting
nuts
21 dia.
Ferrite core
26.2
9.6 dia.
(14.5 dia.) (16.8 dia.)
Ferrite core
50
25
7
Insulated cover
Coaxial cable, 2.9 dia., Standard length: 2 m
24
33
35
17
Connector
12
Case material
Brass
Transmission surface ABS resin
Mounting Hole Dimensions
12.5 dia.
Filling
Epoxy resin
Cable
PVC
15
V680-HS63-W
Insulated cover
30
40
28±0.1
37
14.5 dia.
5
16.5 dia.
5.5-dia. coaxial cable
16.5 dia.
27
53
Operation indicator
5
50
6
Connector
Ferrite core
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
23
Center of coil
11
V680-HS63-R
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC (gray)
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC (black)
Insulated cover
30
20
50
40
28±0.1
14.5 dia.
5
16.5 dia.
5.3-dia. coaxial cable
Ferrite core
16.5 dia.
6
27
5
10
53
Operation indicator
Connector
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
23
11
V680-HS65-W
100
90±0.2
5
Four, 4.5-dia.
(Mounting holes)
50
5
Center of coil
Ferrite core
Connector
Operation
indicator
50
25
100
90±0.2
16.5 dia.
37
14.5 dia. 16.8 dia.
Bushing
50
30
5.5-dia. coaxial cable
10
Insulated cover
10
14
30
20
V680-HS65-R
11
100
90±0.2
5
Four, 4.5-dia.
(Mounting holes)
50
5
Operation
indicator
Ferrite core
(39.5)
50
25
100
Connector
16.5 dia.
14.5 dia. 16.8 dia.
90±0.2
Bushing
30
10
10
14
30
20
50
5.3-dia. coaxial cable
Insulated cover
11
V680 Series RFID System
37
Read/Write Antenna with Built-in Amplifier Unit
V680-H01
FCC label
Mounting Hole Dimensions
Coil core
Four bushings and screws
Four, M4 or 4.5 dia.
Four, 5-dia. (Mounting holes)
5.8-dia. vinyl-insulated
shielded cable with
10 conductors
Standard length: 0.5 m
20-mm max.
500
20-mm max.
185
185±0.2
200
78.8
Connector
cable
85
4-R8
142.5
Connector
142.5
Power supply (green)/
communications (orange)
indicator
7.5
235
250
Ferrite core
235±0.2
40
21
13.5
Case material
PC/ASA resin
Filling
Aluminum
Cable
PVC
Amplifier Unit
V680-HA63A/-HA63B
Operation indicator
13.7
65
18
51
12.8 dia.
9.5 dia.
36
15 dia.
40
25
25
Connector
25
Connector
35.6
15
5.8-dia. vinyl-insulated round cable
(2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.)
3.5
Case material
PC resin
Filling
Epoxy resin
Cable
PVC
ID Controller
V680-CA5D01-V2/-CA5D02-V2
Mounting Hole Dimensions
Two, M4
65
80±0.2
(80)
Two, 4.5-dia.
(Mounting holes)
5
105
95±0.2
95
18
90 80
17.5
5
7.5
38
V680 Series RFID System
ID Sensor Units
CJ1W-V680C11
CS1W-V680C11
Six operation indicators
(140)
65
Six operation indicators
123
4.5
2.7
Switches
0
18.1
90
31
1
130
17.3
4.7
2.7
(193)
Switches
Connector
Connector
101
35
CJ1W-V680C12
CS1W-V680C12
Eight operation indicators
(193)
123
Switches
(140)
Eight operation indicators
2.7
Switches
65
0
4.5
1
130
4.7
90
18.1
25
51
17.3
24.5
Connectors
2.7
3.6
31
Terminals
35
Connectors
8
15
101
With cover
mounted: 16.5
Handheld Reader Writer
V680-CHUD
Operation indicator
45
Activate switch
11
65
160.5
10.5
Dimension L
800 60
1900 60
25.5
23
L
33
23
Case material
3.8-dia. vinyl-insulated round cable
Standard length: 0.8 or 1.9 m
Antenna
Ferrite core
V680-CH1D
ABS resin
Nameplate material PET resin
Activate switch
Reset button
Operation indicator
25.5
23
11
45
65
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
48
2500±60
160.5
Antenna
44.9
Ferrite core
10.5 33
23
24.99 32.2
1.8-dia. × 2 vinyl-insulated flat cable
Standard length: 0.19 m
Connector
20
Connector
0±
Case material
19
13 dia.
ABS resin
Nameplate material PET resin
45
V680-CH1D-PSI
Activate switch
Reset button
Operation indicator
25.5
23
11
45
65
Antenna
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
48
160.5
800 +50
−110
10.5 33
23
44.9
24.99 32.2
Ferrite core
Connector
Case material
ABS resin
Nameplate material PET resin
V680 Series RFID System
39
AC Adapter
Handheld Terminal (Recommended)
V600-A22
Recommended Handheld Terminal
Psion Teklogix model 7527S-G2-@@-S
(V680-A-7527S-G2-@@-S)
25.4±1
54±1
42
90
48±1
210
4+0.1 dia.
9.5±0.3
Accessories
V680-D1KP66T Attachments
V600-A86 Holder
4-R5.5
25±0.2
Mounting Hole Dimensions
Two, 4-dia.
Two, M3
37 34 15
25±0.2
16
25±0.2
25±0.2
4
15
34
37
3.5
10
Case material
PPS resin
Case material
PBT resin
Filling
Epoxy resin
V680-D8KF68/-D32KF68 Attachments
V600-A81 Holder
Two, 4.5-dia.
mounting holes
Mounting Hole Dimensions
54
44
44±0.2
Two, M4
76±0.2
86
76
10
V680-D1KP58HT Attachments
V680-A80
17
Mounting Hole Dimensions
20 dia.
12 dia.
M12
M12
3.2 dia.
11.5
15
40
50
110
V680-H01 Special Cables
V700-A40-W 2M
V700-A40-W 5M
V700-A40-W 10M
V700-A40-W 20M
V700-A40-W 30M
Note: The model numbers for each
length (L1) are as follows:
L1 ±100 (See note.)
41.8
20 dia.
Connector to R/W Head
49
Model
15.5 dia.
6-dia. vinyl-insulated
round cable
Connector to ID Controller
Connection label
2,000
V700-A40-W 5M
5,000
V700-A40-W 10M
10,000
V700-A40-W 20M
20,000
V700-A40-W 30M
30,000
Material
40
V680 Series RFID System
Length L1
V700-A40-W 2M
PVC
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by
OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR
PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS
WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY
CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S ANALYSIS
CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE,
OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND
SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated
products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the
product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by
itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is
it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS
BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s
test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of
the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request.
Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading
errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner,
for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON Corporation
Industrial Automation Company
Sensing Devices Division H.Q.
Industrial Sensors Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7022/Fax: (81)75-344-7107
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
Authorized Distributor:
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark, Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON Industrial Automation Global: www.ia.omron.com
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
Cat. No. Q151-E1-05
0408-0.3C (1106) (M)
Cat. No. Q151-E1-05
OMRON Corporation
2008.5
In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Rights Reserved.