Walker WP1640DVD Operating instructions

OPERATING INSTRUCTIONS
WP1640DVD
COLOUR TELEVISION WITH REMOTE CONTROL
BE WALKER WISE...logon to www.walker.ie
Contents
Features ................................................................. 2
Accessories ............................................................ 2
Introduction ............................................................. 2
Preparation ............................................................. 2
Safety Precautions ................................................. 3
Power.................................................................. 3
Power Cord ......................................................... 3
Moisture and Water ............................................ 3
Cleaning.............................................................. 3
Ventilation ........................................................... 3
Heat and Flames ................................................ 3
Lightning ............................................................. 3
Replacement Parts ............................................. 3
Servicing ............................................................. 3
Waste Disposal ................................................... 3
Information for Users in European Union
Countries ............................................................ 3
Disconnecting the Device ................................... 4
Headphone Volume ............................................ 4
Installation........................................................... 4
LCD Screen ........................................................ 4
Warning .............................................................. 4
Overview of the Remote Control ............................ 5
LCD TV and Operating Buttons .............................. 6
Viewing the Connections- Back Connectors .......... 6
Viewing the Connections - Side Connectors .......... 7
Power Connection .................................................. 7
Aerial Connection ................................................... 8
Using Side USB Input ............................................. 8
USB Memory Connection ................................... 8
Connecting the LCD TV to a PC............................. 8
Connecting to a DVD Player................................... 8
Using Side AV Connectors ..................................... 9
Using Other Connectors ......................................... 9
Connecting Other Equipment via Scart .................. 9
Inserting Batteries in the Remote Control Handset.... 9
Switching the TV On/Off ......................................... 9
To Switch the TV On ........................................... 9
To Switch the TV Off ......................................... 10
Input Selection ...................................................... 10
Basic Operations .................................................. 10
Operation with the Buttons on the TV ............... 10
Operation with the Remote Control .................. 10
Initial Settings ........................................................11
Electronic Programme Guide (EPG)................. 12
Programme Options.......................................... 12
Analogue Teletext ............................................. 13
Widescreen ....................................................... 13
Dijital TV Menu System ........................................ 13
Channel List ...................................................... 13
Navigating the Entire Channel List ................... 13
Moving the channels in the channel list ............ 13
Deleting the Channels in the Channel List ....... 13
Renaming channels .......................................... 14
Adding Locks to Channels ................................ 14
Setting Favourites ............................................. 14
Program Guide ................................................. 14
Timers ............................................................... 14
Common Interface ........................................... 15
TV Setup ........................................................... 15
Setup ................................................................ 15
Configuration .................................................... 15
Time Settings(**) ............................................... 16
Language Settings ............................................ 17
Language Settings ............................................ 18
Installation......................................................... 18
Video Playback (optional) ................................. 20
Analogue TV Menu System .................................. 21
Picture Menu..................................................... 21
Sound Menu ..................................................... 21
Feature Menu ................................................... 22
Install Menu ...................................................... 23
Install Menu in AV Modes ................................. 24
Program Table .................................................. 24
Source Menu .................................................... 25
PC Mode Menu System........................................ 25
PC Position Menu ............................................. 25
Displaying TV Information .................................... 26
Mute Function ....................................................... 26
Picture Mode Selection......................................... 26
Freezing Picture ................................................... 26
Zoom Modes......................................................... 26
Teletext ................................................................. 27
Tips ....................................................................... 28
Appendix A: PC Input Typical Display Modes....... 29
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types).............................................. 29
Appendix C: Supported File Formats for USB
Mode..................................................................... 30
Specifications ....................................................... 31
Transmission Standards: ...................................... 31
MOBIL TV INSTRUCTION MANUAL ................... 32
English - 1 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 1
22.10.2010 13:32:07
Features
Accessories
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T - MPEG2) (DVB-TMPEG4).
INFO
SLEEP
• HDMI connectors for digital video and audio. This
connection is also designed to accept high definition
signals.
SCREEN
SOURCE
PRESETS
MENU
RETURN
Batteries: 2 X AAA
• USB input.
• 200 programmes from VHF, UHF(analogue).
• 1000 programmes for digital mode (IDTV).
• Integrated tuner DVB-T HD, MPEG 2 / MPEG 4
compatible.
FAV
LANG.
SUBTITLE
EPG
/
• OSD menu system.
• Scart socket for external devices (such as video,
video games, audio set, etc.).
• Stereo sound system. (German+Nicam)
Instruction Book
• Teletext, fastext, TOP text.
Remote
Controller
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
Introduction
• Sleep timer.
Thank you for choosing this product. This manual will
guide you for the proper operation of your TV.
Before operating the TV, please read this
manual thoroughly.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5 minutes the
TV switches itself automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7.
• Audio line out.
Please do keep this manual in a safe place for
future references.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
Use this device in moderate climates.
• Game Mode (optional)
10 cm
10 cm
10 cm
English - 2 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 2
22.10.2010 13:32:08
Safety Precautions
Please read the following recommended safety
precautions carefully for your safety.
Power
• Always use the provided AC adaptor.
• Operate only from the power source specified on
the AC adaptor.
• The power adaptor may become hot during normal
operation. This is not a malfunction.
• Please make sure that the adaptor is not covered
while in operation. Leave a space of 15 cm
(minimum) around the AC adaptor.
• The rating information and safety caution of the AC
adaptor are provided on the adaptor.
WARNING: When the set is not in use for a long time,
disconnect from the power.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
power cord with wet hands as this could cause a short
circuit or electric shock. Never make a knot in the cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualified
personnel.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to open flames and
sources of intense heat such as an electric heater.
Ensure that no open flame sources, such
as lighted candles, are placed on top of
the TV. Batteries should not be exposed
to excessive heat such as sunshine, fire
or the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified personnel. Do
not remove the cover yourself as this may
result in an electric shock.
Moisture and Water
Waste Disposal
Do not use this device in a humid
and damp place (avoid the bathroom,
the sink in the kitchen, and near the
washing machine). Do not expose this
device to rain or water, as this may be
dangerous and do not place objects
filled with liquids, such as flower
vases, on top. Avoid from dripping
or splashing.
Instructions for waste disposal:
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
Cleaning
Before cleaning, unplug the adaptor
from the wall outlet.Do not use liquid
or aerosol cleaners Use soft and
dry cloth
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metalfree, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
Information for Users in European
Union Countries
This symbol on the product or on its
packaging means that your electrical
and electronic device should be
disposed at the end of its service
life separately from your household
wastes. There are separate collection
systems for recycling in EU.
English - 3 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 3
22.10.2010 13:32:09
For more information, please contact the local
authority or the dealer where you purchased the
product.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
Installation
To prevent injury, this device must be
securely attached to the wall in accordance with the
installation instructions when mounted to the wall (if
the option is available).
Connection to a Television
Distribution System (Cable TV etc.)
fromTuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing - and to a television distribution system using
coaxial cable, may in some circumstances create a
fire hazard.
To ground the antenna system properly, be sure that
the cable grounding is connected with the building’s
grounding system. Note that the connection should
follow IEC 60364-7-707 and IEC 603646-5-548
standards which require that the grounding should be
as close as possible to the cable connection.
LCD Screen
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
Be sure to ground the connection properly.
Connect the ground terminal of the AC adaptor with the ground
terminal provided at the power outlet using the enclosed power cord.
If the provided plug does not fit your outlet, consult an electrician for
replacement of the obsolete outlet.
English - 4 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 4
22.10.2010 13:32:10
Overview of the Remote Control
1. Standby
2. Image size
INFO
3. Sleep timer
4. Numeric buttons
5. Return / Exit (in DTV mode) / Index page (in
TXT mode)
SLEEP
SCREEN
SOURCE
PRESETS
6. Cursor up / Page up (in TXT mode)
7. Cursor left
8. Programme up (Page down in DTV mode)
9. Programme down (Page up in DTV mode)
10. Mono-Stereo / Dual I-II / Current language (in
DTV mode) (*)
11. Previous Programme / Swap
RETURN
12. Electronic programme guide (in DTV mode)
MENU
13. Info / Reveal (in TXT mode)
14. Picture mode selection
15. Source selection
16. Red / Sound menu / Change channel list (in
DTV mode)
17. Green / Picture / Subtitle on-off (in DTV mode)
(*)
18. Yellow / Feature / Current language (in DTV
mode) (*)
19. Menu on-off
20. Blue / Install menu / Selects DVB-T channels
(in DTV mode)
21. OK / Channel list (in DTV mode) / Hold (in TXT
mode)
29
FAV
22. Cursor right / Subpage (in TXT mode)
LANG.
SUBTITLE
EPG
/
28
23. Cursor down / Page down (in TXT mode)
24. Volume up
30
25. Volume down
26. Mute
27. Teletext / Mix
28. Subtitle on-off (in DTV mode) / TXT Subtitle
29. FAV (*) (Favourite Selection) (in DTV mode)
30. Media Browser playback buttons. (in DTV
mode)
(*) Only for EU country options.
Note: Buttons that are not indicated with a
number on the remote control illustration are
not functional in TV mode.
English - 5 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 5
22.10.2010 13:32:10
LCD TV and Operating Buttons
1. Standby button
2. TV/AV button
3. Programme Up/Down buttons
P\CH
TV/AV
4. Volume Up/Down buttons
MENU
Note: Press
/
buttons at
the same time to view main menu.
Viewing the Connections- Back Connectors
DC IN (12V)
ANT.
5VDC
60mA
1. SCART socket inputs or outputs for external devices.
Connect the SCART cable between SCART socket on TV and SCART socket on your external device
(such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
2. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
3. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to
enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to
enable component audio.
English - 6 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 6
22.10.2010 13:32:11
4. S/PDIF Out outputs digital audio signals of the currently watched source.
Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.You should
also set SPDIF Out option in the Sound Menu as On.
5. RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustrationin the following
pages.
V+
V+
6. DC 12 V Input is used for connecting the supplied power adaptor. V-
V-
.
7. Audio Line Outs output audio signals to an external device such as an optional sound system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.
Note: Line out feature cannot be used while in HDMI source. You can use SPDIF instead.
8. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
9. HDMI 1: HDMI input
HDMI Inputs are for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets
or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p
signals. No sound connection is needed for an HDMI to HDMI connection.
Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe
to. For more information, see “Conditional Access” section.
2. USB Input (functional in DTV mode only)
3. Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
4. Video Input is used for connecting video signals of external devices.Connect the
video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
5. Audio Inputs are used for connecting audio signals of external devices. Connect the
audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks
on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also
connect your device with an audio cable to the AUDIO INPUTS of the TV to enable
audio.
Power Connection
IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives
12 V voltage. Connect this adaptor to a system that supplies 110-240V AC,50/60Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
To POWER
INPUT DC 12 V
terminal
DC IN (12V)
ANT.
5VDC
60mA
AC adapter
English - 7 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 7
22.10.2010 13:32:12
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL
INPUT socket located at the rear of the TV.
• Set the resolution that suits your viewing requirements.
Resolution information can be found in the appendix
parts.
Audio
Inputs
PC Input
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
DC IN (12V)
PC RGB cable
(not supplied)
to PC input
ANT.
5VDC
60mA
Using Side USB Input
• You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, video (optional) and MP3 files
stored in a USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
• Do not pull out USB module while playing a file.
Note: Cables shown in the illustration are not
supplied.
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
SIDE VIEW
USB MEMORY
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
USB Memory Connection
• Plug your USB device to the USB input of the TV.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
IMPORTANT: The TV supports only FAT32 disk
formatting. NTFS format is not supported.
Connecting the LCD TV to a PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
• Power off both computer and display before making
any connections.
SCART socket
Component
video
inputs
Component
audio
inputs
HDMI
input
• Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
• When the connection is made, switch to PC source.
See “Input selection” section.
English - 8 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 8
DVD Player
22.10.2010 13:32:14
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. For selecting
the related source, see the section “Input selection”
in the following parts.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
Connecting Other Equipment via
Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to your
LCD TV by using the SCART socket. Note that cables
shown in the illustration are not supplied.
Power off both the TV and the devices before making
any connections.
For more information, refer to your device’s own
instruction book.
Headphone
SCART socket
Camcorder
DVD Recorder
Video Recorder
Decoder
Inserting Batteries in the Remote
Control Handset
Using Other Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• To connect external speakers, use an audio cable.
Do not reverse the AUDIO LEFT and AUDIO RIGHT
jacks. Turn on the LCD TV and external speaker set
after all connections are made. Refer to your speaker
set’s manual for further queries.
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
• For connecting a to a device that has SPDIF support,
use an appropriate SPDIF cable to enable sound
connection. You should also set SPDIF Out option
in the Sound menu as On.
External Speakers
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries.
Remote range is approximately 7m/23ft.
A device that
supports
SPDIF signal.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 110-240V AC 50
/60 Hz.
• Press STANDBY switch. Then the standby LED
lights up.
• To switch on the TV from standby mode either:
English - 9 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 9
22.10.2010 13:32:15
• Press the “ ” button, P+ / P- or a numeric button
on the remote control.
• Press the -P/CH or P/CH+ button on the TV. The TV
will then switch on.
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
By either method the TV will switch on.
• Press “
” button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
To Switch the TV Off
Programme Selection
• Press the “ ” button on the remote control or
press the STANDBY switch, so the TV will switch
to standby mode.
• Press “P/CH +” button to select the next programme or
“P/CH -” button to select the previous programme.
• To power down the TV completely, unplug the
power cord from the mains socket.
• Press “
”/“
” buttons at the same time
to view main menu. In the Main menu select submenu using “P/CH -” or “P/CH +” buttons and enter
the sub-menu using “
” or “
” buttons.
To learn the usage of the menus, refer to the menu
system sections.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
Viewing Main Menu
AV Mode
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press the “TV/AV” button in the control panel on the
TV to switch between AV modes.
• Press SOURCE button on your remote control for
directly changing sources.
Operation with the Remote Control
or,
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“ ” button to highlight an input and press “ ” button
to select.
Note: You can mark desired source options by
pressing the OK button. Therefore, when SOURCE
button is pressed, only the marked source options will
be available (except for the TV source).
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press V+ button to increase the volume. Press Vbutton to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous
programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10 - 999 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively. The limit
of the delay time is 3 seconds.
• Press directly the programme number to reselect
single digit programmes.
English - 10 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 10
22.10.2010 13:32:16
Initial Settings
When the TV is turned on for the first time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
process. The following OSD will be displayed during
the automatic search:
By pressing the “ ” or “ ” buttons highlight the language
you want to set and press OK button.
You can get information about the menu usage by
pressing INFO button. Press INFO button again to
exit the help menu.
After then, “First time installation” OSD will appear
on the screen. By pressing “ ” or “ ” buttons, select
the country you want to set and press OK button.
Note: Country selection will not be available for UK.
Press OK to continue.
After Automatic Search is completed, the following
message will be displayed, asking for sorting option.
If you select “YES”, programme list will be sorted
according to LCN (logical channel number). Select
“NO” for using frequency sort. (This feature is
available for only Germany,Austria and Italy country
option)
After this operation, the following menu will appear
on the screen, asking for analog channel search:
After then, the active antenna selection OSD appears
on the screen:
By pressing “ ” or “ ” buttons, set active antenna
mode as on or off.
If an active antenna is connected to your TV, you can
select this option as On. Antenna power should be
“Off” when standard antenna is used instead of the
active antenna. See “Configuration Menu” in the
following sections for more information.
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. A menu will be
displayed to search for analogue channels.
Set Language item by pressing “ ” or “ ” button.
Press “ ” or “ ” button to highlight Country item and
then use “ ” or “ ” to set. Press “ ” or “ ” button to
highlight TXT. Language. Set TXT Language by using
“ ” or “ ” button. To cancel, press the BLUE button.
When finished, press OK or RED button to continue
and the following OSD will be displayed:
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
After automatic tuning is finalized, a programme list
will appear on the screen. In the programme list you
will see the programme numbers and names assigned
to the programmes.
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press OK button.
The IDTV will automatically tune to the transmission
channels, searching for digital terrestrial TV broadcasts
and displaying the names of channels found. This
process will take a few minutes. To cancel searching,
you can press MENU button at any time during the
If you do not accept the locations and/or the names
of the programmes, you can change them in Program
table. For details, see the section, “Program table”.
General Operation
Press the “SOURCE” button on the remote control
and select DTV/USB to switch the TV set to digital
English - 11 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 11
22.10.2010 13:32:16
terrestrial television broadcasting..Information
Banner
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
• Whenever you change the channel using the P + or
P - button or numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen. This will remain on the
screen for approximately a few seconds.
SWAP: Jump to current broadcast.
0 (SEARCH): activates “Guide Search” window
• The information banner can also be displayed by
pressing the INFO button at any time while watching
the TV. Pressing INFO button again removes the
banner.
If the selected channel is locked, you must enter
the correct four digit key to view the channel. In this
case, a dialog box asking for the lock key will be
displayed:
Press “0” button to view Guide Search menu. Using
this feature, you can search the programme guide
database in accordance with the genre selected or
with name match.
Programme Options
Electronic Programme Guide (EPG)
Some, but not all, channels send information about
the current and next events. Please note that event
information is updated automatically. If there are no
event information data available for channels,EPG
will be displayed with blanks.
• Press EPG button to view the EPG menu.
• Press “ ” or “ ” buttons to navigate through
channels.
• Press “ ” or “ ” buttons to navigate through the
programme list.
In EPG menu, press the OK button to enter the
“Programme Options” menu.
Using this option, you can switch to the selected
channel.
Over Air Download
To ensure that your IDTV always has the most upto-date information, please ensure that, after use,
it is set to standby mode. At 3 A.M. each day, the
IDTV automatically searches for any updates which
may be broadcast and will download this to your
IDTV automatically. This operation will normally take
approximately 30 minutes.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles.
Note: You can enable subtitles by pressing the
(For UK**) or GREEN (for EU*) button.
Digital Teletext (For UK only**)
RED button (Shrink): makes the info boxes
smaller.
• Press the TELETEXT (
GREEN button (Expand): makes the info boxes
larger.
• Operate it with the coloured buttons, “ ” / “ ” /“ ”
/ “ ” buttons and OK button.
YELLOW button (Prev. Day): displays the
programmes of previous day.
The operation method may differ depending on the
contents of the digital teletext.
BLUE button (Next day): displays the programmes
of the next day.
Follow the instructions displayed on digital teletext
screen.
INFO (Details): displays the programmes in detail.
• When “Press “OK” button or similar message
appears on the screen, press the OK button.
OK (View / Timer): shows the highlighted channel /
sets the reminder for future programmes.
) button.
• The digital teletext information appears.
English - 12 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 12
22.10.2010 13:32:17
• When the TELETEXT ( ) button is pressed, the
TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
Navigating the Entire Channel List
• Press “ ” or “ ” keys for selecting the previous or
next channel.
• You can press
page down.
or
buttons to move page up or
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• To watch a specific channel, highlight it using “ ”
or “ ” buttons and then press OK button, while the
“Select” item on Channel List menu is highlighted
via “ ” or “ ” buttons.
• When you press the TELETEXT ( ) button again,
the digital teletext screen will be displayed.
Moving the channels in the channel
list
Analogue Teletext
• Press “ ” or “ ” buttons to select the channel that
will be moved.
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
• Press “ ” or “ ” buttons to select the ‘’Move’’ item
on Channel List menu and press OK to confirm.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the SCREEN button repeatedly to
change screen format.
When Auto is selected, the format being displayed is
determined by the picture being broadcast.
PLEASE NOTE: Menu size changes depending on
the chosen image size.
Dijital TV Menu System
• Press MENU button and DTV main menu will be
displayed.
Note: If you enter the same programme number of
the channel that you want to move, “....services will
be replaced. Do you want to continue?” OSD will
be displayed. Press OK to confirm or select “No”
to cancel.
Note: The following screen will be displayed when
want to move or delete channels that are sorted by
LCN (logical channel number) service.
Select “YES” to continue. Select “NO” to cancel
(LCN feature is available for only Germany, Austria,
Switzerland and Italy country options).
Deleting the Channels in the Channel
List
Channel List
Using “ ” or “ ” buttons on the remote control in
main menu, make sure that the first item, Channel
List, is highlighted and press the OK button to display
the Channel List.
• Press “ ” or “ ” buttons to select the channel that
will be deleted.
• Press “ ” or “ ” buttons to select the “Delete’’ item
on Channel List OSD.
You can use following buttons for Move, Delete and
Lock functions.
• Channel List is the place where the channels are
managed.
YELLOW: Tags/untags the selected channel.
BLUE: Tags/untags all channels.
English - 13 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 13
22.10.2010 13:32:17
Press “OK’ button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen.
Renaming channels
To rename a specific channel, the channel must be
highlighted via pressing “ ” or “ ” buttons and then
highlight the “Edit Name” item by pressing “ ” or “
” buttons. Press “OK” button to activate rename
feature.
Adding a Channel to a Favourites List
By pressing “ ” or “ ” buttons, highlight the channel
that you want to add to the favourite list. By pressing
OK button, the highlighted channel is added to
Favourite List. F icon indicates that a channel is added
to Favourite List.
Removing a Channel from a Favourite List
• Highlight the channel that you want to remove from the
favourite list and press OK button to remove.You can
press OK button again to re-adding a channel.
Now pressing “ ” or “ ” buttons moves to the previous/
next character. Pressing “ ” or “ ” buttons toggles the
current character, i.e., ‘b’ character becomes ‘a’ on and
‘c’ on . Pressing the numeric buttons ‘0...9’ replaces the
highlighted character with the characters printed above
the key one by one as the button is pressed.
Press the MENU button to cancel the editing or OK
button to save the new name.
Adding Locks to Channels
Channel Locking provides a password-protected
access to channels selected by parents.
• To activate Favourites, go to the Configuration menu
and select Favourite mode. Use “ ” or “ ” to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
Hint: Pressing INFO button can help you for
displaying information in IDTV.
Program Guide
This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.
Timers
In order to lock a channel you should know the
Parental Lock password (default value is set to
0000 in the factory and can only be changed from the
Configuration menu).
By pressing “ ” or “ ” buttons, highlight the channel
to be locked and select the “Lock” option by pressing
“ ” or “ ” buttons. Then press the OK button and a
password box is displayed:
To display timers window, activate the item from the
main menu. To add a timer, press the YELLOW button
on the remote control. Then “Add Timer” window
appears.
Setting Favourites
To set a favourite you should highlight the “Favourites”
item at the bottom of the Channel List menu. Then
press OK button and Edit Favourite List menu
appears on the screen.
Channel: “ ” or “ ” keys will navigate the user
through the TV or Radio list.
Date: Starting date is entered via the Left/Right or
the numeric buttons.
English - 14 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 14
22.10.2010 13:32:18
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Duration: Displays the duration of the recording.
Duration item will be automatically displayed after the
starting and ending times are entered.
Change / Delete: permits or prohibits any modifications
for other users.
You can save the adjustments by pressing the GREEN
key or cancel the process by pressing the RED button.
You can edit the list via GREEN key and delete with
the RED button.
The digital TV Setup menu screen is accessed from
the main menu. Press the MENU button to display
the main menu and use or buttons to highlight “TV
Setup”. Press OK button to display TV Setup menu
screen.
You can find detailed information for all menu items
in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the
following:
Common Interface
Press MENU button to display the main menu and
use the “ ” or “ ” buttons to highlight the “Common
Interface” line and press OK button.
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial
broadcasting.
Configuration
You can configure the settings of your TV. Select
Configuration from Setup menu and press OK to
view this menu. Press the RETURN button on the
remote control to exit.
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the Television using
the following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM, and then the viewing card to the
slot.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
Favourite Mode
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
Use this function to enable or disable favourite mode.
Press “ ” or “ ” button to set this function as on or
off.
• Some CAMs may require the following set up.
Please set the CAM by entering the DIGITAL TV
menu, Common Interface then pressing OK button.
(CAM set up menu is not displayed when it is not
required.)
Scan Encrypted
•To see the viewing contract information:
• Enter DIGITAL TV; press MENU button, then highlight
Common Interface and press OK button.
• When no module is inserted, “No Common
Interface module detected” message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STANDBY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV functions.
Scan Encrypted Channel feature will always be ON
after performing first time installation. When this
setting is on, search process will locate the encrypted
channels as well. If it is set as OFF manually, encrypted
channels will not be located while in automatic search
or manual search. Use “ ” or “ ” button to select
Scan Encrypted and then press “ ” or “ ” button to
set this setting as On or Off.
Parental Control
• Some channels broadcast material which you do not
want younger members of the family to watch. Any
channel can be ‘locked’ so that it cannot be selected
for viewing unless a four-digit PIN code is entered.
In this way any channel not suitable for younger
viewers can be prohibited.
• This function enables or disables the menu protection
system and allows the PIN code to be changed.
English - 15 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 15
22.10.2010 13:32:18
• Use “ ” or “ ” buttons to highlight Parental Control.
Press OK button to enter Parental Control menu. A
dialog box asking for the lock key is displayed:
There is only one key which is set to “0000” initially.
Enter lock key. If wrong lock key is entered, the
“WRONG PIN” message will be displayed on the
screen and the TV returns to the previous menu. If the
PIN is correct, the Parental Control menu including
following items will be displayed:
Maturity Lock (**)
(**) If you set Country option as UK in the first time
installation, Maturity Lock option will not be vsible.
When set, this option gets the maturity information
from the broadcast and if this maturity level is disabled,
the TV will not display the related video-audio.
Menu Lock
Use “ ” or “ ” buttons to set Menu Lock. Here, you
can set/reset locking function for the main menu or
the installation menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system.
Disabled: All menus are unlocked.
All Menus: All menus are accessible only with the
correct lock key. So the user cannot add, delete,
rename or move the channels and cannot set the
timers.
Installation Menu: Installation menu is locked, so the
user cannot add channels. Changes will be updated
after exiting Configuration Menu.
Use “ ” or “ ” buttons to highlight the Time Zone
Setting. Time Zone Setting is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL. When
AUTO is selected, Current Time and Time Zone
options will not be available to be set.
If MANUAL option is selected as the Time Zone
Setting, Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to
the selected Time Zone.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most up to date
information, use this setting. Please ensure that the TV
is set to standby mode. The TV automatically
powers up at 3.00 A.M. each day and searches for
any new information which may be broadcast and
will download this to your receiver automatically. This
operation will normally take approximately 30 minutes.
If you have an important recording to be carried out at
3.00 A.M. and you do not want to interrupt it, disable
auto OAD search by performing the following:
• Press MENU button and using the “ ” or “ ” buttons
to choose Setup and press OK button.
• Highlight Configuration menu with “ ” or “ ” keys
and press OK.
• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press OK button.
• Using the “ ” or “ ” button change “Automatic
scanning” from Enabled to Disabled.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option.
Press OK to display the “Set PIN” window. Use
numeric buttons to enter new pin number you will need
to input your new pin a second time for verification
purposes. The factory default pin number is 0000, if
you change the pin number make sure you write it
down and keep it safe.
• Highlight “Scan for upgrade” menu with “ ” or “
”keys and pres OK to commence upgrade.
Time Settings(**)
(**): Time setting will not be available for UK.
In the configuration menu, highlight the Time Settings
item by pressing “ ” or “ ” buttons. Press OK and
Time Settings sub menu will be displayed on the
screen:
• After the search progress is completed, the message
“ Completed searching for upgrade. No new software
was found” appears on the screen if no new software
is found.
English - 16 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 16
22.10.2010 13:32:18
Dolby Digital
Preferred Language (Optional)
In the Configuration Menu, highlight the Dolby D item
by pressing “ ” or “ ” buttons. Use the “ ” or “ ”
buttons to set the Dolby Digital as On or Off. If the
By pressing the “ ” or “ ” buttons the preferred audio
description language is being changed. This setting
can be used, only if it is available.
channel that you are watching supports Dolby Digital
and Dolby Digital Plus, you can turn this setting on.
Relative Volume (Optional)
Hard of Hearing (*)
Use “ ” or “ ” button to select Hard of Hearing and
then press “ ” or “ ” button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
(*) Hard of Hearing function will not be available for UK.
Channel List
Use “ ” or “ ” buttons to go to Channel List option.
Use or buttons to toggle Channel List Mode. If you
select “TV Only”, with the “ ” or “ ” buttons, you
navigate through only TV channels. If you select
“Radio Only”, with the “ ” or “ ” buttons, you
navigate through only radio channels. If you select
“Text Only”, with the “ ” or “ ” buttons, you navigate
through only text channels. If you choose “Show All”
all channels can be navigated. To save the recent
changes and exit; press the MENU button.
Digital Audio Out
Use this setting to define digital audio out signal type.
Use “ ” or “ ” buttons to set Digital audio out as
AC3 or PCM.
If your selected channel includes AC3 sound stream,
you should connect your TV to external equipment
by using Spdif out of your TV for enabling the sound
output.If you have no external sound equipment,
please select Digital Audio Out as “PCM” by using “
” or “ ” button.
Using this option, the Audio Description volume level
can be increased or decrased relatively, according to
the general volume.
Standby Search (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use “ ” or “ ” button to select Standby Search and
then press “ ” or “ ” button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Active Antenna (*)
Use “ ” or “ ” buttons to highlight Active Antenna
option. When antenna power option is set as On by
pressing “ ” or “ ” button, +5V will be transmitted to
the antenna output.This feature enables the use of
active antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Language Settings
In this menu the user can adjust the preferred language.
Select “Language” item in the Setup menu and press
OK button. Then language settings menu will be
displayed.
A/V Delay
You can use this setting when there is an AV
synchronization problem in the received broadcast.
Press “ ” or “ ” button to change the delay.
Audio Description (Optional)
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media. You can use this feature, only if the broadcaster
supports that additional narration track. Use “ ” or
“ ” buttons to select an item. Then use “ ” or “ ”
buttons to set.
You can set the desired language options by using “ ” /“
” and “ ”/“ ” buttons.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
Audio Description (Optional)
This function enables or disables the audio description
feature by pressing the “ ” or “ ”buttons.
English - 17 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 17
22.10.2010 13:32:19
Language Settings
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Highlight Yes and press OK button to search for
analogue channels. The following menu appears on
the screen for analogue channel search:
.
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
• Audio Language is used for selecting the soundtrack
of a channels. Primary settings are the first priority
when multiple choices are available on a broadcast.
Secondary settings are the alternatives when the
first options are not available.
• Guide Language: If the received EPG data includes
the selected guide language, EPG data language
will be changed accordingly.
•Teletext language sets the desired teletext
language.
Media Subtitle: In order to display subtitles properly,
use this setting to select a movie subtitle language.
By pressing “ ” or “ ” button, select the desired
language option.
Set Language item by pressing “ ” or “ ” button.
Press “ ” or “ ” button to highlight Country item and
then use “ ” or “ ” to set. Press “ ” or “ ” button to
highlight TXT Language. Select a region by using “ ”
or “ ” button. When finished, press OK or RED button
to continue. To cancel, press the BLUE button.
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in most efficient way.
Select Installation from the main menu by pressing “
” or “ ” buttons.
After APS is finalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Manual Search
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
In Manual Search, the number of the multiplex is entered
manually and only that multiplex is searched for the
channels. For every valid channel number, signal level
and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Highlight Yes or No by using “ ” or “ ” buttons and
press OK button to confirm.
If Yes is selected, automatic search starts.
Use this setting to clear channels stored. Press “
” or “ ” button to select Clear Service List and then
press OK. The following OSD will be displayed on
the screen:
English - 18 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 18
22.10.2010 13:32:20
Media Browser (in DTV mode)
Whenever you plug a USB flash disk to your TV, the
following message will be displayed on the screen:
Press OK to cancel.
Select Yes by pressing “ ” or “ ” button and press
OK to delete all of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time
Installation” menu item and press OK button, then
you will be asked whether or not to delete the settings.
Selecting “Yes” by pressing OK button while the “Yes”
is highlighted, will delete the existing channel table.
Select YES or NO by pressing “ ” or “ ” button and
“OK” button to continiue.
You can also select Media Browser item from the main
menu by using “ ” or “ ” buttons. Press OK to view
Media Browser contents.
You can play audio and photo files from a USB flash
disk.
Note: Some USB compliant devices may not be
supported.
Note: Movie Sense and Pixellence features cannot
be set while in Media Browser mode.
After factory settings are loaded, “First Time
Installation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using “ ” or “ ”
buttons, select the desired language option, and press
OK button to activate.
Note: If you plug USB stick in analogue mode, the TV
will automatically switch to digital TV mode.
Note: If the USB stick is not recognized after Power
off/on or First Time Installation, first plug the USB
device out and power off/on the TV set. Plug the USB
device again.
After then, “First time installation” OSD will appear on
the screen. By pressing “ ” or “ ” buttons, select the
Country you want to set and press OK button (* only
for EU countries).
Next, active antenna mode selection OSD will appear
on the screen. Use “ ” or “ ” to set and press OK to
continue. See the section, “Initial Settings” for more
information.
After active antenna mode option is selected, a
message asking for automatic search appears on
the screen:
Highlight “Yes” item by pressing “ ” or “ ” buttons
and press OK button to start installation. After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen. This process is same as described in
Automatic Search section.
Press OK to browse, “MENU” to quit.
Playing Audio Files:
Play This (OK) : Plays the selected file.
Play ( ) : Play all media files in the folder starting
with the selected one.
Pause/Resume (
playback.
Stop (
button): Pauses or resumes
button) : Stop the playing file.
Previous/Next ( / ) : Jumps to previous or next
file to play.
English - 19 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 19
22.10.2010 13:32:20
Shuffle (INFO) : Plays the files randomly. If shuffle
mode is enabled, previous/next functions will also
jump to the tracks randomly.
Loop (BLUE) : Plays the selected file repeatedly.
Skip backvard / Skip forward (
/
button)
Viewing JPEG Files
Video Playback (optional)
Play (
Stop (
button) : Starts the video playback.
button) : Stops the video playback.
Pause (
button) : Pause the video playback.
Rewind (
button) : Goes backward.
Forward (
button) : Goes forward.
Menu (MENU button) : Sets subtitle/Audio.
You can set subtitles by using OK button before
starting the playback or by using MENU button during
the playback. Press RETURN button to switch back
to previous menu.
Jump (0...9) : jump to selected file using the numeric
buttons.
OK : view the selected picture in full screen.
Play / Slideshow ( button) : start to slideshow with
all pictures in the folder.
Slideshow Options
Pause (
button) : Pause the slideshow.
button) : Continue with the slideshow.
Continue (
Previous/Next (
file of slideshow.
Rotate (
buttons.
/
/
) : Jump to previous or next
) : Rotate the picture using up/down
RETURN : Back to file list.
Shuffle (RED) : Shows the files randomly and
icon turns the
continuous in current folder and
highlighted icon. If during a slideshow the shuffle mode
is enabled, the next pictures will be chosen randomly
(If the loop function is not enabled, the slideshow will
stop at the end. If the loop function is enabled, after
the slideshow ends, it will start again and again).
Loop (BLUE) : Slideshow goes on continuously and
icon turns the highlighted icon.
INFO : Activate the operations bar.
English - 20 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 20
22.10.2010 13:32:21
Press “ ” or “ ” button to select Film Mode.
Analogue TV Menu System
Press “ ” or “ ” button to set this feature On or Off.
Picture Menu
Turn this feature on when you are watching.
films to see the fast motion scenes clearly.
Game Mode (optional)
Select Game Mode by pressing “ ” or “ ” button.
Use “ ” or “ ” button to set Game Mode as On or
Off. When Game Mode is set to On, specific game
mode settings, which are optimized for better video
quality, will be loaded.
Also; Picture Mode, Contrast, Brightness, Sharpness,
Colour and Colour Temp settings will be invisible and
disabled while Game Mode is on.
Note:
Picture mode selection button on the remote control
will have no function while Game Mode is on.
Picture Zoom
Mode
For your viewing requirements, you can set the related
mode option.
Press “ ” or “ ” button to select Mode. Press “
” or “ ” button to choose from one of these options:
Cinema, Dynamic and Natural.
Brightness/Contrast/Colour/Sharpness/
Hue
Press “ ” or “ ” button to select the desired option.
Press “ ” or “ ” button to set the level.
Note: Hue option can only be visible when the TV
receives an NTSC signal.
Colour Temp
Press “ ” or “ ” button to select Colour Temp. Press
“ ” or “ ” to choose from one of these options: Cool,
Normal and Warm.
Select Picture Zoom by pressing “
button.
” or “
”
Use “ ” or “ ” buttons, to change picture zoom to
Auto, 16:9, 4:3, Panoramic, 14:9, Cinema, Subtitle
or Zoom.
Store
Press “ ” or “ ” button to select Store. Press “ ”
or OK button to store the settings. “Stored...” will be
displayed on the screen.
Reset
Press “ ” or “ ” button to select Reset. Press
“ ” or “ ” or OK button to reset the picture modes to
factory default settings.
Sound Menu
Note:
• Setting Cool option gives white colours a slight
blue stress.
• Setting Warm option gives white colours a slight
red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture is
noisy, use Noise Reduction setting to reduce the
noise amount.
Press “ ” or “ ” button to select Noise Reduction.
Press “ ” or “ ” to choose from one of these options:
Low, Medium, High or Off.
Film Mode
Volume
Films are recorded at a different number of frames per
second to normal television programmes.
Press “ ” or “ ” button to select Volume. Press “ ”
or “ ” button to change the level of the Volume.
English - 21 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 21
22.10.2010 13:32:22
Equalizer
Press “ ” or “ ” button to select Equalizer. Press “
” button to view equalizer menu.
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain fixed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press “ ” or “ ” button to select AVL. Press “ ” or
“ ” button to set the AVL as On or Off.
Spdif Out
Press “ ” or “ ” button to select Spdif Out. Press “
” or “ ” button to set the Spdif Out. as On or Off.
Note: If Spdif Out is set to On, headphone will be
disabled.
Effect (optional)
Press “ ” or “ ” button to change the preset. In
equalizer menu, the preset can be changed to Music,
Movie, Speech, Flat, Classic and User.
Select the desired frequency by pressing “ ” or “ ”
button and increase or decrease the frequency gain
by pressing “ ” or “ ” button.
If you are watching a mono broadcast, set Effect on to
obtain a better sound effect which will be more stereolike. If the current sound system is stereo, switching
this effect on will give a more spatial effect.
Press “ ” or “ ” button to select Effect. Press “ ”
or “ ” button to set as On or Off .
Store
Press the “MENU” button to return to the previous
menu.
Press “ ” or “ ” button to select Store. Press “ ”
or OK button to store the settings. “Stored...” will be
displayed on the screen.
Note: Equalizer menu settings can be changed only
when the Equalizer Mode is in User.
Feature Menu
Balance
This setting is used for emphasizing left or right
speaker balance.
Press “ ” or “ ” button to select Balance. Press “
” or “ ” button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
Headphone
Press “ ” or “ ” button to select Headphone. Press
“ ” button to view the headphone menu.
Note: Headphone will be disabled when SPDIF option
is set to on.
Headphone sub-menu options are described below:
Volume
Press “ ” or “ ” button to select Volume. Press “
” button to increase headphone volume level. Press
“ ” button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63.
Sound Mode (optional)
Press “ ” or “ ” button to select Sound Mode. Using
“ ” or “ ” button, you can select Mono, Stereo, Dual I
Sleep Timer
Press “ ” or “ ” button to select Sleep Timer. Use
“ ” or “ ” button to set the Sleep Timer.
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Child Lock
Press “ ” or “ ” button to select Child Lock.
English - 22 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 22
22.10.2010 13:32:22
Use “ ” or “ ” button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled
by the remote control handset. In this case the control
panel buttons will not work.
Hence, if one of those buttons is pressed, Child Lock
On will be displayed on the screen when the menu
screen is not visible.
Language
Ext Out should be On in order to use Timers function
in the DTV mode.
HDMI PC Full Mode (optional)
If you want to view PC screen in HDMI mode by using
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
Press “ ” or “ ” button to select Language. Use “
” or “ ” button to select the Language.
Note: If you connect an HDMI device and switch the
TV to HDMI mode, this feature will be visible (except
for 1080i/1080P resolution).
Default Zoom
Full Mode (optional)
While zoom mode is set as AUTO, the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to adopt.
Press “ ” or “ ” button to select Default Zoom. You
can set Default Zoom to Panoramic, 16:9, 4:3 or
14:9 by pressing “ ” or “ ” button.
If you connect a device via HDMI connectors and
set 1080i/1080P resolutions, Full Mode item will be
visible.You can set Full Mode as 1:1 or Normal by
using “ ” or “ ”.If you select 1:1, screen ratio will
be adjusted correctly. If you set Normal, screen ratio
may expand.
Blue Background
Install Menu
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
By pressing “ ” or “ ” button, select Blue
Background. Press “ ” or “ ” button to set Blue
Background as On or Off.
Menu Background
Press “ ” or “ ” button to select Menu Background.
You can set menu background level by pressing “
” or “ ” button.
Backlight
This setting controls the backlight level. Select
Backlight by pressing “ ” or “ ” button. Press“
” or “ ” button to set Backlight to Auto, Medium,
Maximum or Minimum.
Menu Timeout
To set a specific display timeout for menu screens,
set a value for this option.
Press “ ” or “ ” button to select Menu Timeout. Use
“ ” or “ ” button to change menu timeout to 15 sec,
30 sec or 60 sec.
Teletext Language
Press “ ” or “ ” button to select Teletext Language.
Use “ ” or “ ” button to change Teletext Language to
West, East, Turk/Gre, Cyrillic, Arabic or Persian.
Program
Press “ ” or “ ” button to select Program. Use “ ”
or “ ” button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
Band
Band can be selected either C or S. Press “ ” or “
” button to set Band.
Channel
Ext Out
Channel can be changed by “ ” or “ ” button or
numeric buttons.
Press “ ” or “ ” button to select Ext Out. Use “ ” or
“ ” button to set the Ext Out as On or Off.
Colour System
Note:
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.
Press “ ” or “ ” button to select Colour System. Use
“ ” or “ ” button to change the colour system to PAL,
PAL 60, SECAM or AUTO.
English - 23 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 23
22.10.2010 13:32:23
Sound System
Press “ ” or “ ” button to select Sound System.
Press “ ” or “ ” button to change the sound system
to BG,DK, I, L or L’.
Fine Tune
Press “ ” or “ ” button to select Fine Tune. Press “
” or “ ” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “ ”
or “ ” button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Press “ ” or “ ” button to select Store. Press “ ”
or OK button to store the settings. “Stored...” will be
displayed on the screen.
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
Install Menu in AV Modes
Name
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
To change the name of a programme, select the
programme and press the RED button.
Store
The first letter of the selected name will be highlighted.
Press “ ” or “ ” button to change that letter and “ ”
or “ ” button to select the other letters. By pressing
the RED button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
APS (Auto Programming System)
Colour System
Press “ ” or “ ” button to select Colour System. Use
“ ” or “ ” button to change the colour system to PAL,
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
Store
Press “ ” or “ ” button to select Store Program.
Press “ ” or OK button to store the settings.
“Stored...” will be displayed on the screen.
Program Table
Select Program Table by pressing “ ” or “ ” button.
Press “ ” to display Program Table:
English - 24 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 24
22.10.2010 13:32:24
Country
PC Position Menu
Press “ ” or “ ” button to select your country. If you
want to exit from A.P.S. function, press the BLUE
button.
Select the first icon by pressing “ ” or
“ ” button. PC Position menu appears on the
screen:
When you press OK or RED button for starting
automatic tuning, all stored programmes will be erased
and the TV will search for available channels. During
the search, the following OSD will be displayed:
Whenever you press the BLUE button, APS function
stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.
Source Menu
Autoposition
Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or OK button. Source menu appears
on the screen:
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using “ ” or “ ” buttons.
Press OK or “ ”, “ ” button.
Warning: Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top
or bottom of the screen.
In source menu, highlight a source by pressing “ ”
or “ ” button and switch to that mode by pressing “
” button. Source options are; TV, DTV/USB, DVD,
EXT-1, FAV, HDMI, YPbPr and PC-VGA.
Note: Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
PC Mode Menu System
See “Connecting the LCD TV to a PC” section for
connecting a PC to the TV set.
For switching to PC source, press “SOURCE” button
on your remote control and select PC input. You can
also use “Source” menu to switch to PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.
Select V Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using “ ” or “ ” buttons. Use
“ ” or “ ” button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Select Dot Clock item by using “ ” or “ ” buttons.
Use “ ” or “ ” button to adjust the value.
English - 25 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 25
22.10.2010 13:32:25
PC Picture Menu
For adjusting PC picture items, do the following:
Press “ ” or “ ” button to select the second icon. PC
Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical to
settings defined in TV picture menu under “Analogue
TV Menu System”.
Note: If you set Colour Temp as User, you can define
R, G, B settings manually.
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
Sound, Feature and Source settings are identical to
the settings explained in Analog TV menu system.
Displaying TV Information
Programme Number, Programme Name, Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
“INFO” button is pressed.
Mute Function
Press “ ” button to disable sound. Mute indicator will
be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the first
one is pressing the “ ” button and the second one
is increasing the volume level.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
4:3
Use to view a normal picture (4:3 aspect ratio) as this
is its original size.
Picture Mode Selection
By pressing PRESETS button, you can change
Picture Mode settings in accordance with your
viewing requirements. Available options are Dynamic,
Natural and Cinema.
Note: This feature cannot be set while in PC mode.
Panoramic
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
Freezing Picture
You can freeze the picture on the screen by pressing
the “OK” button on the remote control. Press the “OK”
button to freeze picture. Press again to quit freeze
mode (Note: Not available in “ATV” mode).
The top and bottom of the picture are slightly cut off.
14:9
Zoom Modes
You can change the aspect ratio (image size) of the TV
for viewing the picture in different zoom modes.
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
Press SCREEN button to directly change the zoom
mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.
Zoom mode cannot be changed while in PC mode.
Cinema
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
Auto
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
English - 26 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 26
22.10.2010 13:32:26
Subtitle
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
Teletext
Teletext system transmits information such as news,
sports and weather on your TV. Note that is the signal
degrades, for example in poor/adverse weather
conditions, some text errors may occur or the teletext
mode may be aborted.
Teletext function buttons are listed below:
“
Zoom
” Teletext/Mix
Activates teletext mode when pressed once. Press
again to place the teletext screen over the programme
(mix).Pressing again will quit the teletext mode.
This option zooms to the picture.
“RETURN” Index
Selects the teletext index page.
Note: You can shift to screen up or down by pressing
“ ” / “ ” buttons while picture zoom is selected as
panaromic, 14:9, Cinema or Subtitle.
“SCREEN” Expand
Press once to enlarge top half of the page, press again
to enlarge the bottom half of the page. Press again to
revert back to normal size.
“INFO/
” Reveal
Shows hidden information (e.g. solutions of games).
”OK” Hold
Holds a text page when convenient. Press again to
resume.
P+ / P- and numbers (0-9)
Press to select a page.
Note: Most TV stations use code 100 for their index
pages.
Coloured Buttons
(RED/GREEN/YELLOW/BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics.
When FASTEXT system is available, sections in a
teletext page will become colour-coded and can be
selected by pressing the coloured buttons. Press
a coloured button that corresponds to with your
needs.
The coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing P - or P + commands will request
the next or previous page respectively.
TXT (Teletext) Subtitle
If you press SUBTITLE button, teletext subtitle
information will be displayed on the bottom right part
of the screen (if available). You can set the desired
option by highlighting it using “ ” or “ ” button and
then by pressing OK button
English - 27 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 27
22.10.2010 13:32:26
Remote Control
Tips
Screen Care
Clean the screen with a slightly damp, soft cloth. Do
not use abrasive solvents as they may damage the
coating layer of the TV screen.
For your safety, unplug the mains plug when cleaning
the set. When moving the TV, hold it properly from
the bottom part.
Image Persistence
Your TV no longer responds to the remote control.
Perhaps the batteries are exhausted. If so you can still
use the local buttons at the bottom of the TV.
Input Sources
If you cannot select an input source, it is possible that
no device is connected.
Check the AV cables and connections if you have tried
to connect a device.
Please note that ghosting may occur while displaying
a persistent image. LCD TVs’ image persistence may
disappear after a short time. Try turning off the TV
for a while.
To avoid this, do not leave the screen in still picture
for extended periods.
No Power
If your TV system has no power, please check the
main power cable and connection to the mains
socket outlet.
Poor Picture
Have you selected the correct TV system? Is your TV
set or house aerial located too close to a non-earthed
audio equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the
aerial.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune
the channels.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial
cable damaged? Are suitable plugs used to connect
the aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving a
transmission. Have you selected the correct button
on the remote control? Try once more.
Also make sure the correct input source has been
selected.
Sound
You can not hear any sound. Did you perhaps interrupt
the sound, pressing the
button?
Sound is coming from only one of the speakers. Is the
balance set to one extreme? See Sound Menu.
English - 28 -
01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 28
22.10.2010 13:32:26
Appendix A: PC Input Typical
Display Modes
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types)
The display has a maximum resolution of 1600 X
1200. The following table is an illustration of some of
the typical video display modes.
Your TV may not support different resolutions.
Supported resolution modes are listed below.
If you switch your PC to an unsupported mode, a
warning OSD will appear on the screen.
Resolution
Index
Hor
Ver
Source
EXT-1
(SCART)
Frequency
Ver
(Hz)
Hor
(KHz)
Standard
FAV
Supported
Signals
Available
PAL 50/60
O
NTSC 60
O
RGB 50
O
RGB 60
O
PAL 50/60
O
NTSC 60
O
480I
60Hz
O
480P
60Hz
O
1
640
480
60
31.5
VESA
2
640
480
72
37.9
VESA
3
640
480
75
37.5
VESA
576I
50Hz
O
4
800
600
56
35.2
VESA
576P
50Hz
O
5
800
600
60
37.9
VESA
720P
50Hz
O
6
800
600
70
43.8
7
800
600
72
48.1
VESA
720P
60Hz
O
8
800
600
75
46.9
VESA
1080I
50Hz
O
9
832
624
75
49.7
MAC
1080I
60Hz
O
10
1024
768
60
48.4
VESA
1080P
50Hz
O
11
1024
768
70
56.5
VESA
1080P
60Hz
O
12
1024
768
72
57.7
13
1024
768
75
60.0
480I
60Hz
O
14
1152
864
70
64.2
VESA
480P
60Hz
O
15
1152
864
75
67.5
VESA
576I
50Hz
O
16
1152
870
75
68.9
MAC
576P
50Hz
O
17
1280
768
60
47.7
VESA
720P
50Hz
O
18
1360
768
60
47.7
19
1280
960
60
60.0
VESA
720P
60Hz
O
20
1280
1024
60
64.0
VESA
1080I
50Hz
O
21
1280
1024
75
80.0
VESA
1080I
60Hz
O
22
1600
1200
60
75.0
VESA
1080P
50Hz
O
1080P
60Hz
O
1080P
24 HZ
O
YPbPr
HDMI
(X: Not Available, O: Available)
Note: In some cases a signal on the LCD TV may
not be displayed properly. The problem may be
an inconsistency with standards from the source
equipment (DVD, Set-top box, etc.). If you do
expereince such a problem please contact your dealer
and also the manufacturer of the source equipment.
English - 29 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 29
22.10.2010 13:32:26
Appendix C: Supported File Formats for USB Mode
Media
Movie
(optional)
File
Extension
.avi
Format
Audio
(Maximum resolution/Bit rate etc.)
XviD/ 3ivx
PCM/MP3
XviD Verson up to: 1.1.2
MPEG4
PCM/MP3
MS ISO
MPEG4
PCM/MP3
Support SP and ASP
PCM
Sample Rate: 8K ~ 48KHz
Music
Remarks
Video
-
MPEG 1/2
.mp3
-
Baseline JPEG
Photo
.jpg
Progressive JPEG
External
Subtitles
(optional)
.srt
.smi
Sample Rate: 8K ~ 48KHz, Bit Rate:
32K~320Kbps
Layer 1/2/3
(MP3)
WxH = 14592x12288, Up to 179 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
Up to 4 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
Support Text File Format, but do not support
Picture File Format
Note: Necessary bitrates for some video types are higher than USB limits. For this reason, some video types
cannot be played.
Information for Users on Disposal of Old Equipment and
Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Battery
Products
Notice: The sign Pb below the symbol for batteries indicates that this
battery contains lead.
English - 30 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 30
22.10.2010 13:32:27
Specifications
Transmission Standards:
TV BROADCASTING
DVB-T, MPEG2,DVB-T, MPEG4 HD
PAL/SECAM B/G D/K K’ I/I’ L/L’
i. DEMODULATION
RECEIVING CHANNELS
-Symbol rate: COFDM with 2K/8K FFT mode.
VHF (BAND I/III)
UHF (BAND U)
-Modulation: 16-QAM - 64-QAM FEC for all DVB
modes (automatically found)
HYPERBAND
ii. VIDEO
NUMBER OF PRESET CHANNELS
-H.264 (MPEG-4 part 10) main and high profile level
4.1/MPEG-2 MP@HL video decoder.
200
-HD display multi format capable (1080i, 720p,
576p)
CHANNEL INDICATOR
On Screen Display
-CVBS analogue output.
RF AERIAL INPUT
iii. AUDIO
75 Ohm (unbalanced)
-MPEG-1 layer I/II, MPEG-2 layer II, AAC, HEAAC,
AC3
OPERATING VOLTAGE
110-240V AC, 50/60 Hz.
-Sampling frequencies supported are 32, 44.1 & 48
kHz
AUDIO
German+Nicam Stereo
AUDIO OUTPUT POWER (WRMS.) (10% THD)
2 x 2,5
POWER CONSUMPTION (W)
50 W (max)
< 1 W (Standby)
PANEL
16” wide display
DIMENSIONS (mm)
DxLxH (With foot): 120 x 384 x 300
Weight (Kg): 3,90
DxLxH (Without foot): 65 x 384 x 270
Weight (Kg): 3.70
English - 31 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 31
22.10.2010 13:32:27
MOBIL TV INSTRUCTION MANUAL
Switching the TV On Using 12 Volt
1. Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to
the battery of car, making sure to observe the correct polarity.
2. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights
up.
3. Press the “ ” button, P+ / P- or a numeric button on the remote control or press the “
CH or P/CH+ button on the TV. The TV will then switch on.
” button, -P/
4. Adjust for best picture through antenna position or set TV channels again if necessary.
Switching the TV Off
1. Press the “ ” button on the remote control or press the “
standby mode.
” switch on the TV, so the TV will switch to
2. Unplug cable connectors and power plugs.
ATTENTION: 12 V Input :
V+
V+
V-
V-
English - 32 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 32
22.10.2010 13:32:27
Important Instruction
For your own safety read following instruction carefully before attempting to connect this unit to the mains
supply.
MAINS (AC) OPERATION
The wires in the mains lead are coloured in accordance with the following code :
GREEN
&
FUSE
YELLOW
(Earth)
(if there is earth cable)
BROWN
(Live)
BLUE
(Neutral)
IMPORTANT
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal which is marked with
the letter E, or by the earth symbol, or coloured green or green and yellow.
The wire which is coloured blue or black must be connected to the terminal which is marked with the
letter N or coloured Black.
The wire which is coloured brown or red must be connected to the terminal which is marked with the
letter L or coloured Red.
For continued protection against risk of fire, replace only with same type and rating of fuse (ASTA
approved 5A 250VAC fuse).
CAUTION
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
SAFETY PRECAUTION
THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT
ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.
English - 33 01_MB37D_[GB]_(01-TV)_1900UK_IDTV_BRONZE15_MOBIL_TV_16856W_10070329_50177245.indd 33
22.10.2010 13:32:27
Features
Contents
Features ............................................................... 34
General Properties............................................ 34
Safety Information ................................................ 35
Notes on Discs ..................................................... 35
On handling discs ............................................. 35
On cleaning....................................................... 35
Licence Notification .............................................. 35
How to Watch a DVD ............................................ 35
DVD Control Panel Buttons .................................. 36
Overview of the Remote Control .......................... 36
General Operation ................................................ 37
General Playback ................................................. 38
Basic Play ......................................................... 38
For your reference: ....................................... 38
Notes on Playback: ........................................... 38
Setup Menu Items ................................................ 38
Vıdeo Setup Page............................................. 38
TV Type......................................................... 38
DivX VOD ..................................................... 38
Language Setup ............................................... 38
OSD LANG ................................................... 38
AUDIO .......................................................... 38
DISC MENU .................................................. 38
SUBTITLE ..................................................... 38
Preferences ...................................................... 39
DEFAULT ...................................................... 39
DOWNMIX .................................................... 39
PASSWORD (Change Password): ............... 39
Troubleshooting .................................................... 39
The picture quality is poor (DVD)...................... 39
Disc does not play ............................................ 39
Wrong OSD language....................................... 39
Some functions (Angle, Zoom etc) do not work ... 39
No picture ......................................................... 39
No sound .......................................................... 39
Distorted sound................................................. 39
No response from remote control ..................... 40
If nothing works................................................. 40
Definition of Terms ................................................ 40
Disc Types Compatible with This Unit .................. 41
Supported File Formats ........................................ 42
Specifications ....................................................... 42
General Properties
• DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG
/ DivX playback.
• NTSC/PAL playback (according to disc content)
•
, LPCM audio via coaxial and optical
digital audio outputs. (optional)
• Multi-Audio (up to 8) support (According to disc
content)
• Multi-Subtitle (up to 32) support (According to disc
content)
• Multi-Angle (up to 9) support (According to disc
content)
• 8 level parental control
• Fast forward and rewind in 5 different speeds. (2x,
4x, 8x, 16x, 32x)
• Slow motion playback in 4 different speeds. (1/2x,
1/4x, 1/8x, 1/16x forward)
• Frame by frame forward playback.
• Search Mode
• Repeat
• Coaxial audio output (optional)
• Copied disks may be incompatible.
Note
• This DVD player may not support some MP3
recordings due to differences in recording formats
or disc type.
• Please read the owner’s manual about MP3 playback.
• CD-R/CD-RW discs recorded by CD-DA method
can be played. Some CD-R/CD-RW discs may be
incompatible due to laser pick-up and disc design.
• DVD-R/RW discs recorded by DVD-Video method
can be played . Some DVD-R/RW discs may be
incompatible due to laser pick-up and disc design.
• Some discs may be incompatible with JPEG Viewer
function due to different recording format or
condition of the discs.
English - 34 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 34
22.10.2010 13:31:42
On cleaning
Safety Information
CAUTION
DVD Player is a class 1 laser product. However this
product uses a visible laser beam which could cause
hazardous radiation exposure. Be sure to operate the
player correctly as instructed.
• Before playing, clean the disc with a cleaning cloth.
Wipe the disc from the center out.
CLASS 1
LASER PRODUCT
• Manufactured under license from Dolby Laboratories.
“Dolby”, and the double-D symbol are trademarks of
Dolby Laboratories.
RISK OF ELECTRIC SHOCK
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
Licence Notification
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock of persons.
• This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
How to Watch a DVD
When placing a disc into the loader, labeled side of
the disc should be on the front:
Notes on Discs
On handling discs
• To keep the disc clean, handle the disc by its edge.
Do not touch the surface.
• Do not stick paper or tape on the disc.
• If the disc is contaminated with any substance like
glue remove before using it.
When TV set is turned on, first switch to DVD source
by using the SOURCE button on the remote control.
Press play on the remote control, or directly press play
button at the front panel. If there is no disc inside the
loader, place a DVD first and press play.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature can rise
quickly and damage the disc.
• After playing, store the disc in its case.
English - 35 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 35
22.10.2010 13:31:43
DVD Control Panel Buttons
A. Disc loader
B. Play / Pause
Plays/pauses the disc. When DVD menu (root menu) is active, this button functions
as “button select” (selects the highlighted item in menu) if this is not prohibited by the
disc.
C. Stop / Eject
Stop playing disc / Eject or Load the disc Note:
• You cannot eject the disc via the remote control.
• While playing a file, you should press STOP button three times to eject.
Overview of the Remote Control
1. Standby
2. Numeric buttons
INFO
3. Return back
4. Language selection (Set language)
5. Display time / DVD menu
SLEEP
SCREEN
SOURCE
PRESETS
6. Clear
7. Stop
8. No function
9. Rapid Reverse
10. Rapid advance
11. Info
RETURN
MENU
12. Zoom
13. Repeat
14. Root
15. Menu
16. Title
17. OK / Select
18. Navigation Buttons
19. Subtitle
20. Angle
21. Search mode
FAV
LANG.
SUBTITLE
EPG
/
22. Play
23. Pause
24. Skip next
25. Skip previous
English - 36 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 36
22.10.2010 13:31:43
General Operation
You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote
control. Below are main functions of commonly used remote control buttons.
Buttons on the
Remote Control
DVD
Playback
Movie
Playback
Picture
Playback
Music
Playback
Play
Play
Play
Play
Pause
Pause
Pause
Pause
Stop
Stop
Stop
Stop
/ e/f
/
/
ANGLE
C
DISPLAY
INFO
LANG.
MENU
Skip
Skip
Previous / Next Previous / Next
backward/forward
backward/forward
Shifts the zoomed picture left or right (if available).
Highlights a menu item. / Shifts the zoomed picture up or down (if available).
Rapid advance / Rapid reverse
Changes slide
Views the scene from different angles (if effect (depends
X
available).
on the
content).
Clears digit (if available).
Displays time / Views main setup menu
Time counter mode selection (during playback). Press repeatedly to switch
between modes.
Audio language.
X
X
Displays TV menu.
OK / SELECT
REPEAT
Enter / View / Play
Displays repeat options.
RETURN
ROOT
SEARCH MODE (*)
Returns back to the previous menu (if available).
Goes back to the root folder (if available).
Selects the
Selects the
Direct selection of scenes or time.
desired file.
desired file.
Subtitle on-off. Press repeatedly to switch
X
X
between subtitle options.
Media source selection.
SUBTITLE
SWAP
TITLE
ZOOM
+
[ + ]
+
+
+
+
+ Displays disc menu
(if available).
Displays disc menu
(if available).
X
X
Zooms picture. Press repeatedly to switch between zoom options.
Other Functions – Button Combinations
(During playback)
Slow forward.
Sets slow forward speed.
Sets rapid advance speed.
Sets rapid reverse speed.
Confirms stop command.
Press repeatedly to advance manually.
(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to
switch one digit titles (example: to select 5, press 0 and 5.
English - 37 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 37
22.10.2010 13:31:44
11. Reverse stepping is not available.
General Playback
12. For your convenience:
Basic Play
1. Press on the power button
2. Please insert a disc to the loader.
The disc will be automatically loaded and play
commences if the disc does not have any menus
recorded on it.
A menu may appear on the TV screen after a few
moments or the film may start immediately after the
introduction of the Film Company. This behaviour
depends on the disc content and may change.
If you attempt to enter a number greater than the total
time of the current title, the time search box disappears
and “
Input Invalid” message appears on up-left
corner of screen.
13. Slide Show is disabled when the ZOOM mode
is on.
Setup Menu Items
Vıdeo Setup Page
Note: Step 3 and 4 is available only when a menu is
recorded on the disc.
3. Press “ ” / “ ” / / or the number button
(s) to select the preferred title.
4. Press SELECT.
Play of the selected items now starts.The played item
may be a motion picture, a still picture or another
submenu depending on the disc.
For your reference:
If an action corresponding to a button is prohibited the
“
” symbol appears.
TV Type
TV Type is only available as ‘PAL’. The TV set also
supports NTSC signal; however, the signal will be
converted to PAL when it appears on the screen.
DivX VOD
Notes on Playback:
1. No sound will be heard during Rapid advance
or Rapid reverse.
2. No sound will be heard during Slow motion play.
DivX VOD provides the convenience of streaming
video in terms of quality and performance.
Language Setup
3. Reverse slow motion play is not available.
4. In some cases, the subtitle language is not
changed immediately to the selected one.
5. When the preferred language is not selected even
after pressing the button several times, it means
that the language is not available on the disc.
6. When the player is restarted or the disc is
changed, the subtitle selection is automatically
changed back to the initial settings.
7. If a language is selected, not supported by the
disc, the subtitle language will automatically be
set to the disc’s priority language.
8. Usually a circulation will happen while switching
to another language, that is you can cancel
the subtitle by pressing this button a number of
times until “Subtitle Off” appears on the screen.
9. When the power is turned on or the disc is
removed, the language heard is the one
selected at the initial settings. If this language
is not recorded on the disc, only the available
language on the disc will be heard.
10. Some DVDs may not contain root and/or title
menus.
OSD LANG
You can select the default OSD language of the
player menus
AUDIO
You can select the default audio language if supported
by the DVD disc.
DISC MENU
You can select the DVD’s disc menu language among
these languages. Disc menu appears in the selected
language, if supported by the DVD disc.
SUBTITLE
You can select the default subtitle language if
supported by the DVD disc.
English - 38 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 38
22.10.2010 13:31:44
Preferences
Troubleshooting
The picture quality is poor (DVD)
• Make sure the DVD disc surface is not damaged.
(Scratch, fingerprint etc.)
• Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean
your disc properly.
DEFAULT
• Ensure that the DVD disc is in the drawer with the
label uppermost.
If you choose RESET and press SELECT, the factorypresets are loaded. Parental level and parental
password does not change.
• A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by to dry
the equipment.
DOWNMIX
Disc does not play
This mode can be selected when the digital audio
output of the TV is used.
• No disc in the machine.
SURROUND: Surround sound output.
STEREO: Two channels stereo.
Place a disc into the loader.
• Disc incorrectly loaded.
Ensure that the DVD disc is in the drawer with the
label uppermost.
PARENTAL (Parental Level)
• Wrong type of disc. The machine cannot play CDROMS etc.
• The region code of the DVD must match the
player.
Wrong OSD language
• Select the language in the set-up menu.
Playing some DVDs can be limited depending on the
age of users. The “Parental Control” function allows
playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight
levels. Level “8 ADULT” adjustment let you watch all of
the DVD titles ignoring the DVD disc’s parental level.
You can watch the DVD discs, which has the same or
lower parental level than the player’s level only.
PASSWORD (Change Password):
Using this item you can change the current
password.
To change the password you will be prompted to
enter your old password. After you have entered
your old password, you can now enter the new 4-digit
password.
You can use C key to delete the incorrect entry.
Note: Factory preset of the password is “0000”. You
have to enter XXXX digital password every time you
want to change the parental level. If you forget your
password please contact technical service.
• The language for the sound or subtitles on a DVD
cannot be changed.
• Multilingual sound and/or subtitles not recorded on
the DVD.
• Try to change the sound or subtitles using DVD’s title
menu. Some DVD’s do not allow the user to change
these settings without using the disc’s menu
Some functions (Angle, Zoom etc) do
not work
• These functions are not available on the DVD.
• Angle can only be changed when the angle symbol
is displayed.
No picture
• Have you pressed the correct buttons on the remote
control? Try once more.
No sound
• Check the volume is set to an audible level.
• Make sure you have not switched the sound off
accidentally.
Distorted sound
• Check that the appropriate listening mode setting
is correct.
English - 39 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 39
22.10.2010 13:31:44
No response from remote control
Title Number
• Make sure the remote control is in the correct
mode.
• Check batteries are fitted correctly.
These numbers are recorded on DVD discs. When a
disc contains two or more movies, these movies are
numbered as title 1, title 2, etc.
• Change the batteries.
Track Number
If nothing works
These numbers are assigned to the tracks, which are
recorded on AudioCDs. They enable specific tracks
to be located quickly.
If you have tried the above solutions and none seem
to work, try switching your TV-DVD off and on again.
If this does not work, contact your supplier or TV-DVD
repair technician. Never attempt to repair a defective
TV-DVD yourself.
Definition of Terms
Angle
Recorded onto some DVD discs are scenes, which
have been simultaneously shot from a number of
different angles (the same scene is shot from the
front, from the left side, from the right side, etc.). With
such discs, the ANGLE button can be used to view
the scene from different angles.
Chapter Number
These numbers are recorded on DVD discs. A title
is subdivided into many sections, each of which are
numbered, and specific parts of video presentations
can be searched quickly using these numbers.
DVD
This refers to a high-density optical disc on which
high-quality pictures and sound have been recorded
by means of digital signals. Incorporating a new video
compression technology (MPEG II) and high-density
recording technology. DVD enables aesthetically
pleasing full-motion video to be recorded over long
periods of time (for instance, a whole movie can be
recorded).
Dolby Digital
Many movie theatres are equipped with 5.1 channel
surround systems. This same type of technology is
available to you in your home. To enjoy full 5.1-channel
surround, your DVD player must be connected to an
external Dolby Digital decoder via the digital outputs
(either coaxial or optical).
Dolby Pro Logic
This is Dolby Laboratories’ technology to decode
Dolby Surround encoded programs actively. Dolby
Surround programs have four channels of audio
(Left, Center, Right and Surround) encoded into a
standard 2-channel stereo signal. The rear channel
is monaural.
LPCM
LPCM stands for Pulse Code Modulation and is
digital audio.
MPEG
Short for Moving Picture Experts Group. This is an
international standard for compression of moving
images. On some DVDs digital audio has been
compressed and recorded in this format.
DivX
DivX is a digital video compression technology based
on MPEG-4 and developed by DivX Networks Inc.
DVD has a structure consisting of two 0.6-mm thin
discs, which are adhered to each other. Since the
thinner the disc, the higher the density at which the
information can be recorded, a DVD disc has a greater
capacity than a single 1.2 mm thick disc. Since the
two thin discs are adhered to each other, there is the
potential to achieve double-sided play sometime in
the future for even longer duration play.
Subtitles
These are printed lines appearing at the bottom of
the screen, which translate or transcribe the dialogue.
They are recorded on the DVD discs.
Time Number
This indicates the playtime, which has elapsed from
the start of a disc or a title. It can be used to find a
specific scene quickly. (Not all discs permit the time
search feature to be used. Availability is determined
by the disc’s manufacturer.)
English - 40 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 40
22.10.2010 13:31:45
Disc Types Compatible with This Unit
D is c Ty p e s
(L o g o s )
R e c o r d in g
Ty p e s
D is c S iz e
DVD
12 cm
A u d io
+
V id e o
A U D IO -C D
8 cm
12 cm
M ax.
P la y in g
T im e
S i n g le s id e d ; 2 4 0 m in .
C h a r a c t e r is tic s
•
D V D c o n ta in s e x c e lle n t s o u n d a n d v id e o
•
V a r io u s s c r e e n a n d a u d io fu n c t io n s c a n b e
D o u b le s id e d ; 4 8 0 m in .
S i n g le s id e d ; 8 0 m in .
D o u b le s id e d ; 1 6 0 m in .
7 4 m in .
d u e to D o lb y D ig i ta l a n d M P E G - 2 S y s te m .
e a s ily s e l e c t e d t h r o u g h th e o n s c r e e n
m e nu .
• A n L P is r e c o r d e d a s a n a n a lo g s ig n a l w ith
m o r e d is t o rtio n . C D is r e c o r d e d a s a
D ig ita l S ig n a l w ith b e t te r a u d i o q u a lity,
A u d io
a u d io q u a lit y o v e r t im e .
8 cm
D I G IT A L A U D I O
M P 3 -C D
READABLE
le s s d is t o r t io n a n d le s s d e t e rio ra t io n o f
2 0 m in .
12 cm
A u d io
(x x x x .m p 3 )
•
M P 3 is r e c o r d e d a s a D ig ita l S ig n a l w it h
b e tt e r a u d io q u a lity, le s s d is to rt i on a n d
le s s d e t e rio ra t io n o f a u d io q u a lity
o v e r tim e .
8 cm
P IC T U R E -C D
12 cm
JR EPA DE
G
ABLE
•
V id e o
(s t ill p ic tu r e )
J P E G is r e c o rd e d a s a D ig it a l S ig n a l w ith
b e tt e r p ic tu re q u a lity o v e r t im e .
8 cm
D iv X
A u d io
+
V id e o
12 cm
•
V id e o & A u d io w ith M P E G -4 C o m p r e s s io n
te c h n o lo g y.
8 cm
English - 41 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 41
22.10.2010 13:31:45
Supported File Formats
Media
File
Extension
.mpg/ .dat/
.vob
Movie
(optional)
.avi
-
Music
Format
Remarks
Video
Audio
(Maximum resolution/Bit rate etc.)
MPEG1
MPEG Layer
1/2/3
MPEG2
MPEG2
XviD/ 3ivx
PCM/MP3
MPEG4
PCM/MP3
MS ISO
MPEG4
PCM/MP3
Support SP and ASP
PCM
Sample Rate: 8K ~ 48KHz
-
XviD Verson up to: 1.1.2 / DivX 3.1.x, 4.x, 5.x
MPEG 1/2
.mp3
-
WxH = 8902x8902 up to 77Mega-pixel
Baseline JPEG
Photo
Sample Rate: 8K ~ 48KHz, Bit Rate:
64K~320Kbps
Layer 1/2/3
(MP3)
Support format: 444/ 440/ 422/ 420/ Grayscale
.jpg
Up to 4 Mega-pixel
Progressive JPEG
Support format: 444/ 440/ 422/ 420/ Grayscale
.srt
External
Subtitles
(optional)
.smi
Support Text File Format, but do not support
Picture File Format
.sub
.ssa
.ass
Note: It is not guaranteed that all DivX formats are supported.
Specifications
DVD: SS/SL 4.7” (DVD-5)
Types of Discs
Supported
CD-DA
SS/DL 4.7” (DVD-9)
CD-R
DS/SL 4.7” (DVD-10)
CD-RW
DS/DL 4.7” (DVD-18)
MP-3/JPEG
MPEG-2 Video Standard Decoding (MPEG-1 supported)
Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC) pixels
Video Type
50 and 60 Hz frame refresh rates (PAL & NTSC)
Digital bit-stream processing rate up to 108Mbits/sec
Line resolution more than 500 lines
Dolby Digital Decoding
Audio Type
MPEG Multichannel Decoding
LPCM
Digital Audio Outputs:
IEC 958
TOSLINK
Audio Output
Analog Outputs:
24 bit /48, 44.1kHz down-sampling DAC
English - 42 02_MB37D_[GB]_(02-DVD)_WDIVX_1900UK_10070329_50177245.indd 42
22.10.2010 13:31:45
50177245