accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
F RONT E ND P ROTECTION
All of our black, nylon coated steel Nudge Bars, Bull
Bars and ‘A’ frames give an aggressive and purposeful
look and offer improved front end protection due to their
strength. Spot light mounting points are also included on
most. The units bolt to the existing holes on the
chassis/bumper although some cutting of the front spoiler
may be required.
nudge bars
BA 119
BA 009
INTEGRAL BUMPER & NUDGE BAR
TUBULAR “A” FRAME NUDGE BAR
Robust “A” Frame bar suitable for Series 3. Manufactured in 2" diameter 14
gauge steel. To fit to Series vehicles 8 holes need to be drilled. Also features
Spotlight mounting facility. Will also fit air conditioned vehicles.
NOTE: For vehicles fitted with side lift jacks use extension BA 2140
(optional)
BA 119
Tubular ‘A’ Frame Nudge Bar, Black Nylon Coated.
BA 119S
Tubular ‘A’ Frame Nudge Bar, Polished Stainless Steel.
Replaces the existing bumper & uses existing fixings.
Flame cut profiles with wraparounds mounted to a 14 gauge steel box
bumper with a lower protector bar. 11/2” (37mm) diameter tube. Box section
21/2” x 4" (63 x 100mm).
Shot blasted, etched and then black nylon coated for superior finish and
durability. This is the ultimate coating finish which endures all conditions.
Weight: – 26kgs.
Fits all models (including 90/110).
NOTE: For vehicles fitted with side lift jacks use extension BA 2140 (optional)
BA 009 – Integral Bumper and Nudge Bar
PROTECTION BAR
ALSO AVAILABLE
IN
STAINLESS
STEEL
Spotlight mounting
brackets to the rear
PROTECTION BAR
A simple tubular bar, made from heavy gauge steel
tubing. Spotlight mounting brackets to the rear. Fixes
easily to existing bumper.
Fits all Defenders without air-con.
BA 119S
4
BA 119B – Tubular steel Protection Bar - Black
BA 119BS – Tubular Protection Bar in stainless steel
www.bearmach.com
to order – contact official stockists
L AND ROVER
SERIES 2a & 3
L AMP G UARDS
Lamp Guards are more than just a cosmetic
addition to your vehicle they help protect your
valuable lights from debris thrown up by traffic in
front of you or from those inevitable knocks when
off-roading or even the supermarket car park.
BA 002C2
Slatted steel welded on
edge to square frame.
Finished in Black nylon.
Fixed by special bracket
fixing on to lamp bezel.
Will fit all models with
headlights in wings.
Sold as pairs.
Tubular construction MIG welded onto rigid central frame. Flame cut profiles
with steel wraparound and centre folded plate for number plate relocation or
spotlight mounting. Manufactured in 16 gauge steel. 11/2” (37mm) diameter
tube. Top rail only in 11/4” (31mm). Black nylon coated.
Fits all models including 90/110 and air conditioned.
Optional Winch Mount Plate available (see winch section for details).
Weight: – 20kgs.
BA 012
NOTE: For vehicles fitted with side lift jacks use extension BA 2140 (optional)
BA 012 – Pair Slatted
Steel Front Lamp
Guards
BA 002C2 Wraparound Nudge Bar with integral lampguards
BA 002C Wraparound Nudge Bar without integral lampguards
REAR LAMP
GUARDS
BA 012A
Slatted steel welded on
edge to square frame.
Finished in Black nylon.
Fixed by special bracket
fixing on to lamp bezel.
Sold as pairs. Matches
style of BA 012 above.
BA 012A – Pair Slatted
Steel Rear Lamp
Guards
BA 005/2
Set of four Lamp
Guards for 90/110 and
late Series 3. Matching
style of BA012 above
FLAT NUDGE BAR
Construction and fitting as described above for BA002C.
Weight: – 17kgs.
BA 012B – Set of 4
Rear Lamp Guards
BA 005/2 – Flat Nudge Bar with integral lampguards
BA 005 – Flat Nudge Bar without integral lampguards
FOLD DOWN
FLAT NUDGE
BAR
BA 012B
Pair of Rear Lamp
Guards for 90/110 high
capacity pick-up (not
2002). matches style of
BA 012 above.
Similar to BA 005 but
is able to fold down to
load carrying position
with special hinged
bumper fixings.
Features: – Includes
integral lamp guards
NOTE: For vehicles
BA 006
fitted with side lift jacks
use extension BA 2140
(optional). Will also fit air conditioned vehicles – please confirm vehicle type
when ordering.
BA 006 – Fold-down Flat Nudge Bar with integral lampguards
BA 012C – Pair Rear
Lamp Guards
BA 012C
www.bearmach.com
5
lamp guards
FRONT LAMP
GUARDS
WRAPAROUND NUDGE BAR
to order – contact official stockists
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
FOLDING STEPS
A sturdily built step
with convenient spring
loaded action to help
lower the step when you
need it and raise it
when it’s not needed.
BR 1456
BR 1455
Folding Side Step to fit Series 2a/3
Folding Rear Step to fit Series 2a/3
BA 172
BR 1645
exterior styling
WIRE MESH LAMP GUARDS
Manufactured in welded 1” (25mm) wire mesh. Available Zinc plated or
Black nylon coated. Fixed with self-tapping screws or bolts.
BR 1634 – Single Galvanised Front Lampguard
BR 1645 – Single Galvanised Rear Lampguard
BA 086 – Single Black Nylon Coated Rear Lampguard
E XTERIOR S TYLING
A broad range of accessories to improve the
appearance of your Series vehicle while
offering practical protection and improvements.
REAR STEP
Made from heavy gauge steel and bar, then plated to give an extra durable
finish. No drilling required, bolts directly onto crossmember and can be used
in conjunction with all towing attachments. A very functional accessory.
(NOTE: the Drop Plate in the photograph is not included see page 34).
BA 172 – Rear Step
BA 019
CHROME LOOK GRILLE
PLASTIC WHEEL ARCHES
An authentic looking Series grille, but manufactured in a high density plastic
and given a chrome look finish
BR 0546C
Plastic Chrome look grille
6
ABS Plastic wheel arch set to fit Series 3 Land Rover. Will not fit station
wagon type vehicles. Suitable for Short Wheel Base only.
BA 019 – Plastic wheel arch set
www.bearmach.com
to order – contact official stockists
L AND ROVER
SERIES 2a & 3
BA 0202
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 090S
One kit suitable for 88/90 or 109/110 Land Rover. No drilling required.
Provides excellent protection for your door and vehicle side.
BA 0202 Side Mouldings To suit 88/90
BA 0202A Side Mouldings To suit 109/110
BUMPERETTES
Steel folded section
construction with sturdy
brackets. Black nylon
coated.
Bolts directly in place of
the existing grab handles
and affords good
protection.
Weight: – 4.5kgs.
Fits all Land Rover Series
2, 2A, & 3, also 90/110.
BA 090
BA 090 – Bumperettes
RRC 2971
HEAVY DUTY
BUMPERETTES
Suitable for Defender,
these bolt directly on to
the cross member
replacing the grab
handles. Will also fit
Series 2/3 vehicles but
requires drilling of cross
member. Made from
heavy gauge steel and
powder coated for
durability.
Will fit with Spare Wheel
Carrier BA 132
TUBULAR
BUMPERETTES
Heavy duty 1" tube
construction complete with
brackets. Available in 3
finishes. Bolts directly in
place of the existing grab
handles and affords good
protection.
Fits all Land Rover Series
2, 2A, & 3, also 90/110.
Must use jack extension
piece (BA 2140) when
jacking vehicle.
Will not fit with Spare
Wheel Carrier BA 132
BA 090G
exterior styling
SIDE MOULDINGS
BA 090T – Black Nylon
coated tubular
bumperettes
BA 090G – Galvanised
tubular
BA 090T
bumperettes
BA 090S – Stainless Steel
tubular bumperettes
Heavy Duty Bumperettes
RRC2970 – RH
RRC2971 – LH
DOOR REPAIR
CHANNEL
This channel is the part of
the frame at the bottom
of the door which is
extremely prone to rust.
Weld this channel into
place (instead of replacing
the complete frame) and
you have a secure door
skin as good as new.
BA 2053
BA 2053 – Door repair
channel
to order – contact official stockists
BA 290
HEAVY DUTY BUMPERETTES
These heavy duty bumperettes are not only stylish but offer good protection to
the rear end and wing bottoms of your vehicle. Available black powder coated
or galvanised. These are very practical and give your Series vehicle a very
individual look. Now with extra chequer-plate tread.
BA 290 Bumperettes black powder coated
BA 290G Bumperettes galvanised
www.bearmach.com
7
accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BR 1914U
BA 071
UNBREAKABLE
DOOR
MIRRORS
MUD FLAPS
exterior styling
Essential equipment to prevent damage from
debris thrown up by the tyres and to minimise
water spray when driving on-road. Made from a
flexible, hi-density rubber, these Kits consist of a
pair of Mudflaps plus all brackets and fittings.
BR 0204
BR 1015
Rear Mudflaps for Series 2a & 3
Front Mudflaps for Series 2a & 3
These mirrors are
awesome!!! We drove a Defender 90 over the
mirror and it did not break!!! Not even the the
casing broke. Ideal for off road.
DOOR MIRRORS
BA 071 Plain mirror 7" x 5" (178 x 127mm)
BA 072 Plain mirror 10" x 7" (254 x 178mm)
BR 1918 90/110 door mirrors and arms
BR 1914U
Unbreakable mirror.
BR 1914UH
Heated Unbreakable mirror.
(Will fit Series 3 with Defender mirror arm
conversion)
SLIDING
WINDOW KITS
Sliding Window Kits
(pair). Flange Fit
BA 181 - To suit 88" – as
OEM
BA 182A - To suit 109"
BA 181
FIXED WINDOW
KITS
Fixed Window Kits. (Pair)
supplied with glazing
rubber
BA 180 – To suit 88"
BA 182 – To suit 109"
BA 132
BA 180
EXTERIOR SUN
VISOR
Aluminium folded visor
with steel plated
brackets. Supplied as a
complete kit ready for
installation, all fixtures
BA 131
and fittings plated. Visor
supplied in bright finish.
Suitable for spraying to match colour of vehicle.
To Fit: – Series 2, 2A & 3 vehicles.
SPARE WHEEL CARRIER
Bearmach spare wheel carriers are sturdily mounted to the chassis to ensure
minimum strain on rear door and hinges. Opens with rear door and can be
used with our bumperettes.
BA 132
Spare Wheel Carrier. (Not for use with soft top vehicles).
BA 132B
Spare Wheel Carrier as above but for use on soft top.
BA 131 – Exterior Sun Visor
8
www.bearmach.com
to order – contact official stockists
L AND ROVER
SERIES 2a & 3
O FF R OAD P ROTECTION
Although Land Rover Series vehicles were designed for
off-road use you ought to consider adding extra
protection to the vulnerable areas underneath the vehicle
as well as the bodywork. Bearmach make a variety of
items all manufactured to the highest standards and
tested to destruction to give you peace of mind when
tackling the roughest terrain.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DIFF GUARD
Easy to fit, applicable to
all models with standard
axles, Zinc plated for
corrosion resistance NO
DRILLING required.
BA 121 – Diff Guard
RAISED AIR INTAKES
BA 121
BA 2128 – Mantec, Metal Raised Air Intake to suit Series 2 & 3
PANEL PROTECTION.
WADING KITS
Bearmach provide a range of aluminium checker plate to help protect the
panels and give extra strength to the vehicle. Available for the wing tops,
bonnet, sills and rear wings. These plates also enhance the vehicle's
appearance.
BA 2169 – To suit Series 2, 2a
and 3. Consists of
breather pipes for
axles.
ROLL CAGES
Standard rollbar (Body mounted)
Bolted onto cappings. Manufactured
in tubular steel 2” (50mm) diameter
with 3.2mm wall thickness. MIG
welded with heavy mounting plates.
(Not A.R.C). Will also fit vehicle
with standard canvas hood.
BA 113
BA 113C
WINGTOP STRENGTHENER / PROTECTOR
Made from sturdy 2mm aluminium 5 Bar plate, not only do these enhance
the appearance of your vehicle but also allow you to step on top of your wing
to gain access to the roof rack.
BA 113A
BA 113C
BA 108
BA 108A
BA 2005 – Standard Roll Cage
BA 2005
Wingtop strengthener without vent hole, for Series 3.
As BA 113A but in Black finish
Wingtop strengthener. Shorter version coming up to the vent on
the Defender, and can be used to protect the wing top front half
on the Series 3
As BA 108 but in Black finish
REAR WING PROTECTOR
Made from 5 Bar aluminium plate,
these protect the lower part of the
rear wing from stone and gravel
damage. The ideal finishing touch,
and as fitted to Limited Edition
models.
BA 124A
BA 124A – Rear Wing protector for
Series 2a & 3 88"
to order – contact official stockists
BA 126
SILL GUARD
Made from 5 Bar aluminium plate, these protect the sill from scuffing while
entering or leaving the vehicle, as well as stone chips and light off-road
damage. The ideal finishing touch, and as fitted to Limited Edition models.
BA 126A
BA 127A
SILL GUARD to suit Land Rover 88
SILL GUARD to suit Land Rover 109
www.bearmach.com
9
off-road protection
Fitting a raised air intake and wading kit to your vehicle means cleaner air in
dusty conditions and improved wading ability in wet or flooded conditions.
Photograph shows similar product fitted to a Defender
accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
ROOF RACKS
Family holiday, major expedition or just too much to put
inside the vehicle – a robust roof rack is an essential
accessory. Bearmach supply a number of roof racks for
the Landrover range. For Series vehicles, the majority of
the roof racks are simply held into the gutter around the
roof with brackets. Available in black powder coating or
galvanised finish, with an optional ladder in most cases.
RTC8161/A
ROOF RACK
Self assembly roof rack . Black powder coated. Easy for transportation,
disassembles in to a small parcel for storage. Does not include ladder.
RTC8161A – Self assembly Roof Rack for 88"
RTC8141A – Self assembly Roof Rack for 109"
BA 007A
BA 123
roof racks
ROOF RACK AND FOLD-AWAY LADDER
This roof rack with fold away ladder is both stylish and functional. The rack
is of very sturdy construction and is black polyester coated. It is easily fitted
to the gutters using the fixings provided. The ladder folds down from the rear
for easy access and folds back up to remain unobtrusive when not in use. Will
fit all models, clears sun roofs and tropical roofs on Series vehicles.
BA 123
BA 123A
Roof Rack with fold-away ladder
Roof Rack extension that allows above to be fitted to long
wheelbase models
ONE PIECE ROOF RACKS
Manufactured in 3/4” box section steel. Jig welded and with a Galvanised
finish. Clamp on gutter fixing.
Weight: – 26kgs (88/90) or 30kgs (109/110).
BA 007A
BA 008A
To suit Land Rover 88
To suit Land Rover 109
FLAT PACK ROOF RACK
Same appearance and construction as above but arrives flat pack for self
assembly.
BA 007
To suit Land Rover 88
BA 008
To suit Land Rover 109
OPTIONAL LADDER
ROOF BARS
Supplied in pairs, these
racks are suitable for
carrying unwieldy items,
such as ladders, and can
double up as ski or bike
racks with a simple
attachment.
BA 3100
BA 043
10
Heavy Duty
Ladder
Racks
Budget Roof
Bars
A very popular addition to the roof
racks above is the optional galvanised
ladder which is of similar construction
to the roof racks and is easily fitted to
the back of the vehicle allowing easier
access to lift loads to the roof rack. It
is fitted to the left of the rear door.
Suits BA 007/8/7A/8A
BA 010 – Optional Ladder
See Pa
ge 134
for m
ore
ROOF
RACK
ACCES
SSORIE
S
www.bearmach.com
BA 010
to order – contact official stockists
L AND ROVER
SERIES 2a & 3
FRONT REMOVABLE
TOW HITCH
TOWING EQUIPMENT
Quick fit tow hitch – fits in
seconds.
Simply slip over the front
bumper of your vehicle and
tighten the two wing nut bolts
for instant towing
capabilities.
Towing is a vital function of a 4x4 vehicle yet can
present unique problems because of the higher ground
clearance. Bearmach offer a comprehensive range of
equipment specifically for Land Rover Series vehicles…
…for Towballs and other Towing Accessories please
see page 135
BA 3107
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 3107 – Removable Front
Tow Hitch
WINCHING EQUIPMENT
For the serious off-roader a winch can be an essential
part of the kit. Bearmach stocks a wide range of
winching accessories with winch plates to suit all models
and fitments.
See our range of Winches and Winching
Accessories on pages 127 – 131
DROP PLATES
Heavy duty construction and Zinc coated to keep them looking good.
Available as Fixed or Adjustable and will accept our 50mm Towball or
Universal coupling below.
Land Rover 88/109 only
Land Rover 88/109 only
Standard Fixed
Long Fixed
BA 2028
WINCH PLATE
Chassis mounted winch plate to suit Defender, will take 6,000 or 8,000lb
Warn winches. Mounts on top of bumper. Will not fit with air-con.
BA 2028 – Winch plate
BA 2030 – Winch plate to suit winches BA 035 and BA 036
BA 2028A – Chassis mounted winch plate to suit T-Max winches
11,000lbs and up.
BA 190
ADJUSTABLE TOW HITCH
Sturdily constructed adjustable tow hitch. Can be adjusted to five different
heights. (Tow ball not included).
BA 190
Series 2a and 3
to order – contact official stockists
www.bearmach.com
11
towing & winching
BR 1233
BR 1233L
accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
HEAVY DUTY SUSPENSION
Bearmach stocks a wide range of famous names
Shock Absorbers suitable for all Land
Rovers as well as other essential
equipment for power off-roading.
PROCOMP +2" LONG
SHOCK ABSORBERS (ES 3000)
Gain an extra 2" of travel. All supplied with
optional shock boots to cover Damper Rod.
Make
Fill
Boge/Sachs
Oil
Boge/Sachs
Oil
Monroe
Gas Magnum
Procomp
Gas
Tube Size
(+50mm)
Series 3 (88)
Series 3 (88)
Series 3 (109)
Front
Rear
Front
Rear
BR 1486
BR 1401
BR 1486M
BR 1081M
BA 2113A
BA 2114A
Series 3 (109)
BR 0643
BR 0644
BR 1486M
BR 1401M
BA 2115A
Note
1 Ton
Use with corresponding springs
STEERING DAMPERS
Old Man Emu Steering damper
BR 22550
Bilstein
BR 2255B
Steering damper
Must be used with long travel springs
POLYURETHANE
BUSH KITS
suspension
The fitment of Bearmach
Polyurethane Bushes has
been developed to give
more positive location at
pivot or fulcrum points.
These suspension
components are
particularly recommended
if you regularly tow or
carry heavy loads.
These bushes have a high capacity to bear tension and compression and have
been tested at temperatures from -100°C to +100°C. They are resistant to
deterioration and swelling caused by oil, grease or chemicals.
PARABOLIC SPRINGS
These springs are suitable for Series2, 2a and 3 incorporating 88" and 109"
models. Please specify your exact vehicle requirements when ordering.
Parabolic springs are supplied in pairs with all ‘U’ bolts.
PART No
POSITION
HEIGHT INCREASE
No OF LEAVES
BA 2113
BA 2114
BA 2115
Front
Rear
Rear
20mm
30mm
40mm (SWB)
30mm (LWB)
2
3
4
12
BA 2073
BA 2073A
BR 0695P
BR 1083P
BSC 075P
BSC 089P
BSC 204P
P-U
P-U
P-U
P-U
P-U
P-U
P-U
BUSH
BUSH
BUSH
BUSH
BUSH
BUSH
BUSH
Land Rover 109" Series 3
Land Rover 88" Series 3
Shock Absorber
Shock Absorber
Spring Bush, Series
Chassis Bush, Series 88"
Chassis Bush, Series 109"
ALL BUSHES ARE AVAILABLE SEPARATELY
www.bearmach.com
to order – contact official stockists
L AND ROVER
SERIES 2a & 3
SPECIAL PERFORMANCE EQUIPMENT
You’ve got the nudge bars, the wheels and tyres and
you think you’re ready for some serious offroading… BUT have you got the performance?
In this section Bearmach offer products to
improve all aspects of your Series vehicle from
the powerplant to the the brakes and axle.
If you’ve any queries how you could
best set up your vehicle for some
serious off-roading or competition
– call our experts for some
experienced advice.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CAMSHAFTS
Designed to increase
engine power.
BA 2186
•
•
•
•
High Air Flow with Excellent
Filtration
Designed to Increase
Horsepower and
Acceleration
Ideal for extended use
in dirty and dusty
off-road conditions
10 Year / Million
Mile Limited
Warranty
Economical, a
K&N Air Filter Will Last the Life of Your Vehicle
PERFORMANCE CRANKSHAFT DRIVE TRAIN KIT
Consists of forged cam gear, crank gear and heavy duty timing chain. (Does
not include Camshaft)
BA 2179 – To suit 3.5/3.9 V8
HEAD GASKETS
BR 3178C
V8 composite head gasket
to suit 3.5
BEARMACH
VEHICLE
BA 2314
605191K
BA 2317
SERIES
To fit 36IV and 34ICH carbs
SERIES
V8
K&N Service kit
ENGINE
PERFORMANCE FLY
WHEELS
PIPERCROSS
PERFORMANCE
AIR FILTERS
Performance flywheel. These
lightweight performance flywheels
come balanced and ready to fit to
your tuned V8 engine. Uses 91/2"
clutch
Pipercross Performance
Air Filters made
exclusively to suit all
Land Rovers.
Numerous Champion Race and
filters offer:
Maximised Airflow
Increased Acceleration
Washable and Re-Useable
Camshaft to
suit 3.5/3.9
(+18 22BHP)
special performance
•
Rally Teams have proven that Pipercross Air
Additional BHP
Extra Torque
Limited Lifetime Warranty
VEHICLE
All models
Model
Cleaning Kit
Year
90/110
2.25 LD/Carb 83 on
To fit 36IV and 34 ICH Carbs
to order – contact official stockists
BA Number
BA 5800
BA 5802
BA 2031 – Flywheel to suit V8
engines
CLUTCH RELEASE BEARING
The heavy duty metal sleeved clutch release
bearing uses the older specification clutch
bearing and a metal sleeve to proved increased
durability.
BR 2295M – Metal clutch release bearing.
www.bearmach.com
13
accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
V8 DISTRIBUTOR
WATERPROOFING KIT
Everything you need to protect the
distributor from damp conditions.
Includes boots for coil and
distributor.
BA 2840 – V8 Distributor
waterproofing Kit.
SPECIAL PERFORMANCE EQUIPMENT
– BRAKES
WEBER CARBURETTORS
A complete kit to replace Zenith carburettor. Solex carburettors require
additional adaptor piece.
If you are after a bit more economy, but still with performance, this is the
carburettor for you. (21/4 Series 3 engines)
BR 2238W – Weber Carburettors
BRAKE CONVERSION KIT
Twin Choke Performance Carb
performance / brakes
The kit is fitted with Webcon’s new Sync Link kit allowing synchronous
opening of the Weber 32/36 DGV throttle butterflies. This greatly
enhances low speed
driveability and torque,
essential for off road
driving.
This kit will fit all engines
fitted with a tubular
exhaust manifold. If the
original exhaust manifold is
still fitted, a simple 4 hole
blanking plate will need to
be fabricated to block the
aperture left when the OE
intake manifold is
removed.
•
•
• A twin
choke
performance
carburettor kit for
LandRover 2 1/4 ltr
engines.
• Synchronous opening of the
Weber 32/36 DGV throttle
butterflies.
• Enhances low speed driveability
and torque.
Fits all engines with a tubular exhaust manifold.
Enhances low speed driveability and torque
BR 2230 Twin Choke Performance Carburettor
14
Improve the braking performance of any Series vehicle by converting the old
drum system to disc brakes. The kit contains everything need to complete the
task quick and simply. Suits vehicles up to 1980
BA 2165
Disc Brake conversion kit (Workshop fit only).
BA 2165P Replacement Brake
Pads for conversion kit
BA 2165D Replacement Brake
Discs for conversion kit
BRAIDED BRAKE HOSE
Braided Stainless Steel Brake Hoses
are available to replace the standard
rubber flexible hoses and offer a more
durable alternative. TUV approved.
Part No
Vehicle
BA
BA
BA
BA
Series
Series
Series
Series
157
157A
157L
157AL
Hose Qty
2a 88"/109"
3 up to 1980
2a 50mm Extra Long
3 50mm Extra Long
3
3
3
3
Please specify exact model when ordering.
Others sizes are available at special order.
www.bearmach.com
to order – contact official stockists
FREE WHEELING
HUBS
DETROIT DIFF LOCKER*
The Detroit Locker is a fully
automatic locking traction differential
that is well known for premium
performance and dependable
operation. Preload devices between
the side gears deliver 100% torque
and power to both drive wheels yet
unlock automatically to permit
necessary wheel speed differentiation.
The Detroit Locker is trouble-free as
it does not require service adjustments
or special lubricants. Easy to install,
no special tools or case modifications required. One year Limited Warranty.
BA 207
SERIES 2a & 3
Ideal economy measure
when four wheel drive is
not required, saves wear
and tear on front axle.
BR 1272 – Series 2a Free
wheel hubs (pair)
BR 1273 – Series 3 Free
wheel hubs (pair)
WHEEL SPACERS
Kit of 4 Spacers in alloy with all
studs and nuts
To suit Rover Differential. 10 spline, Locker (inc. Carrier)
BA 3410 – 30mm Series
DETROIT TRUE TRAC*
This unit features a gear-type limited
slip design (no clutch or friction plates
to wear out). Its positive gear action
automatically splits the torque with
none of the steering problems
associated with other traction ‘diffs’.
Power transfer is so smooth that it is
unnoticeable through the steering
wheel when fitted in front drive
steering axles.It performs as a
standard differential on normal
highway driving – then automatically engages when needed in wet, muddy or
icy conditions. Includes carrier Bearings.
Truetrac Diff Locker
BA 209
to suit Rover Differential (10 spline – Rear)
BA 209F to suit Rover Differential (10 spline – Front)
HEAVY DUTY COOLING
HEAVY DUTY WATER PUMP
A super efficient modified design of pump which ensures optimum
circulation.The pump features special seals and a pressed steel impeller. It is
a direct replacement to the standard 4 Cyl Series 2a and 3 Petrol & Diesel
replacing ERC9178/RTC6328. Please note this pump will not replace the 7
hole military pumps.
BWA 41S – Heavy Duty
Pump
A.R.B. AIR LOCKER DIFFS*
A manually lockable differential which is operated at the driver’s discretion
by the push of a button. Locking and unlocking of the ‘diff’ is extremely rapid
and can be achieved at any vehicle speed.
Installation involves bolt in replacement of the original equipment differential
centre, an air compressor and in-vehicle switch. Can be fitted to both front
and rear axles without compromising on-road performance.
BA 205
To suit Rover Differential.
10 spline
NOTE: All A.R.B. Diff Lockers
require compressor which is
available separately,
order ref: – BA 215
*
NOTE
For fitment to 4:7:1
Ratio diffs a spacer
ring and bearing
collars are required for
all the above items.
RADIATOR MUFFS
DIFF LOCK SPACER RING
Required to allow fitment of above Diff Locks on vehicles with a 4:7:1 ratio
diffs. Includes extended bolts to suit relevant vehicles.
BA 205S
Spacer Ring
to order – contact official stockists
These high quality Radiator Muffs feature a two position adjustable flap to
allow control of air flow to the radiator to suit different weather conditions.
BA 027 – Radiator Muff to suit Series 2a
BA 027A – Radiator Muff to suit Series 2 and early Series 2a
BA 028 – Radiator Muff to suit Series 3
www.bearmach.com
15
axle & steering
SPECIAL PERFORMANCE EQUIPMENT
– AXLE & STEERING
L AND ROVER
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SPECIAL EQUIPMENT
– ELECTRICAL
BR 1717H
HEATED REAR WINDOW
Heated Rear Window (Triplex). Suitable for vehicles with rear station wagon
doors.
NEW!!
BR 1717H – Heated Rear Window
electrical
HALO H4 UNITS
Bearmach stock a selection of lights for the Defender, Series 3 and classic
RR. Not E marked.
BA 070C – Crystal Clear H4 Unit
BA 070HI – Halo Ions Gold Effect H4 Unit
BA 070HC – Halo Crystal Clear H4 Unit
LUMENITION KITS
Do away with the points and replace with breakerless ignition system for
increased efficiency and accurate tuning.
BA 137
V8 fitting kit
BA 138
4 Cylinder Defender kit (Lucas distributor)
BA 139
4 Cylinder Series 2/3 kit (Lucas distributor)
Parallel Heater Plug Conversion Kit
To fit any of the above kits you will also need:
BA 140
Ignition module
Fits all diesel models to 1980. Eliminates problem of heater plug failure if
one plug breaks. The kit wires the plugs in parallel instead of in series. Full
wiring instructions are provided in kit.
BR 1554 – Parallel Heater Plug Conversion Kit
BA 075
ELECTRIC FAN KITS
REAR SCREEN WIPER and WASH KITS
BA 074
BA 075
16
Rear Door Washer Kit. For station wagon door
Rear Screen Wiper Kit. For station wagon door
The electric fan kit replaces the belt driven unit. Simply remove fan from
water pump hub, then fix electric fan through radiator with special fixings.
BA 031
BA 031A
BA 031T
www.bearmach.com
Secondary Electric fan Kits. Suitable for all Land Rovers
Primary Double Electric fan Kit. For extra cooling
Thermostat to suit above
to order – contact official stockists
L AND ROVER
SERIES 2a & 3
I NTERIOR A CCESSORIES
It’s all very well having the best vehicle for
some off-road adventures but here’s a few
creature comforts to enhance your Series
vehicles’s interior.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 2170
REAR WINDOW MESH GUARD
For added security this set of window guards is constructed from a sturdy
metal grid, black nylon coated. Covers rear door window and the two rear
quarter panels.
BA 076
BA 2170 – Set of 3 pieces
BA 189A
BA 076 – Dog Guard
Construction: – 50mm mesh welded to box section frame. Specially designed
feet to facilitate easy removal. Coating: – Black nylon
Features: – Easily removed by two thumb wheels when not in use. Minimum
of effort required for installation. Can be used as Gun rack support. Acts as a
cargo load divider.
CENTRE
CUBBY BOX
Replacing the middle
seat, this cubby box
not only offers an
armrest, but also
extra storage space.
Features coin tray
and only available in
black.
BA 189 – Cubby Box
to fit Series 2a/3
BA 2420
BA 091
DOG GUARD for Station Wagon
BA 091 – Dog Guard to fit Station Wagon (OEM)
Construction: – 50mm mesh welded to box section frame.
Coating: – Black nylon
Features: – Specially designed for ease of installation, no drilling required.
Floor to roof fitting offers protection to back of seats.
GUN RACK
SECURE CENTRE CUBBY BOX
Easy clip on installation to
Dog Guard.
Supplied as pairs these
clips allow 3 guns or
umbrellas to be carried
one above the other
Sturdy metal construction this lockable
cubby box keeps valuables secure and
from prying eyes. Replaces the middle
seat, the leatherette covered lid is a useful
armrest. Available in black or grey. Cup
holder is available as optional extra.
Size: L500 x W300 x H350mm
BA 087 – Gun Rack to fit
dog guards BA076
AND BA091
BA 2420 – Lockable Cubby Box – Black
BA 2421 – Lockable Cubby Box – Grey
BA 2420C – Optional Cup Holder
to order – contact official stockists
www.bearmach.com
17
interior accessories
DOG GUARD for Series 3 & 2a
accessories
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Bearmach have a full range of replacement seats, ranging
from replacement cushions to complete half leather seats.
Those listed here are specific to Series vehicles but please
refer to page 50 for a full description and fabrics available.
REPLACEMENT SEAT AVAILABILITY FOR SERIES 2a&3
MATS
Hard-wearing Mat sets specifically shaped to suit each model. All mats have
in-built heel pads on both sides for longer life.
BA 047
Two piece carpet sets. Charcoal
BA 060
Rear cargo mat (88” / 90"). Charcoal
BA 061
Rear cargo mat (109” / 110"). Charcoal
HEAVY DUTY
RUBBER MATS
interior accessories
SEATS
Quality rubber mats.
Strong and waterproof,
the weight of these mats
ensures that they do not
move about in the
vehicle and they keep
the carpet clean.
BA 3500 – Pair Rubber
Mats for Series 3
Ref No
Item
BA 2077
BA 2078
BA 2079
Complete Seat High Back
Complete Seat High Back
Complete Seat High Back
Description
BR
BR
BR
BR
1696
1696G
1696M
1696T
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Hinged
Hinged
Hinged
Hinged
BA
BA
BA
BA
BA
2092
2093
2093G
2092T
2093L
Complete
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Seat
Rear
Rear
Rear
Rear
Rear
Fold-up
Fold-up
Fold-up
Fold-up
Fold-up
BA
BA
BA
BA
BA
BA
2080
2080T
2081
2082AB
2080D
2080L
Complete
Complete
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Seat
Seat
Rear
Rear
Rear
Rear
Rear
Rear
Forward
Forward
Forward
Forward
Forward
Forward
Rear
Rear
Rear
Rear
Trim
Units
Black Vinyl
Caviar
Brushwood
Bench
Bench
Bench
Bench
(side
(side
(side
(side
(side
(Side
(Side
(Side
(Side
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing
Facing
Facing
Facing
Facing
Facing
Black Vinyl
Grey Vinyl
Moorland
Techno
Moorland
Black Vinyl
Grey Vinyl
Techno
Black Logo
Black Vinyl
Techno
Moorland
Grey Vinyl
Denim Twill
Black Logo
Pair
Pair
Pair
Pair
Pair
Pair
SOUND PROOF KITS
Supplied in pre-cut felt pieces, this sound proofing
kit covers the cab and under bonnet area. Tailored
to fit precisely, sound deadening felt with peel
back adhesive on the appropriate pieces. Does not
include glue.
BA 045 – Pre-cut Soundproof Kit for Series
vehicles
BA 2009 – Roll of sound-proofing felt
(54” x 36”)
BA 2077
SEATS for Series 2/3
INERTIA REEL
SEAT BELTS
3 point cap and diagonal.
Use as replacement for
90/110 or as retro kit for
earlier models. Early vehicles may
require additional brackets.
BA
BA
BA
BA
BA 184 – Static 3 point
187 – Lap belt
188 – 3 Point Inertia Seat belt - Standard
188A – 3 Point Inertia Seat belt - shorter reel
than BA188
188B – 3 Point Inertia Seat belt - Angled reel
DOOR TRIM KIT
BA 049
BA 044
BA 049
18
Door Trim Kit for
Series 2/3. Supplied as
a kit to trim two front
doors, available with
armrest.
Station wagon rear
door trim.
STANDARD FRONT SEATS
BR 1073 Squab, Driver in black vinyl
BR 1074 Squab, Passenger in black vinyl
BR 1075 Squab, Centre in black vinyl
BR 1090 Cushion, Centre in black vinyl
BR 1091 Cushion, Driver/Passenger in
black vinyl
DE-LUXE FRONT SEATS
BR 1689
BR 1690
BR 1698
BR 1699
Squab, Centre in black vinyl
Cushion, Centre in black vinyl
Cushion, Driver/Passenger in
black vinyl
Squab, Driver/Passenger in
black vinyl
HIGH BACK SEATS
Complete seat with in-built
headrest. (see list above)
BR 1696
BA 2093
REAR BENCH SEAT
Side facing bench seat. (Fitted one
per side for 88/90 and 2 per side for
109/110). Comes complete with
hinged frame and fixings.
www.bearmach.com
REAR INDIVIDUAL SEATS
Individual rear seating. Available as
side facing and they are complete
with all necessary fixings.
to order – contact official stockists
RANGE ROVER
C
SS C
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
F RONT E ND P ROTECTION
All of our black, nylon coated steel Nudge Bars, Bull
Bars and ‘A’ frames give an aggressive and
purposeful look and offer improved
front end protection due to their
strength. Spot light mounting points
are also included on most. The units bolt
to the existing holes on the
chassis/bumper although some cutting
of the front spoiler may be required.
Most of the front protection bars are
also available in high grade, polished
stainless steel.
nudge bars
accessories
L AND ROVER
Note: For vehicles fitted with side lift jacks use
extension BA 2140 (Optional).
BA 095
STEEL
WRAPAROUND
NUDGE BAR
… with Removable
Lamp Guards
BA 096
STEEL WRAPAROUND NUDGE BAR
Wraparound nudge bar with flame cut profile up-rights.
Features top rail and centre plate with provision to mount spotlights.
Rubber mounting over-riders for uprights available as an option.
Minimum cutting of spoiler is required to fit, with easy fix special mountings
to ensure a simple fit.
Manufactured as BA 095
described above but with
removable fitted Lamp
Guards to ensure lamps
can be cleaned easily.
BA 095 – Steel Wraparound Nudge Bar
BA 096 – Steel Wraparound Nudge Bar with Lamp Guards
NOTE: – Not designed for use with BA O11 Lamp Guards or
BA 2029 Winch Plate.
For fitment to Airbag models please consult your Land Rover dealer.
For fitment to Airbag models please consult your Land Rover dealer.
L AMP G UARDS
Lamp Guards are more than just a cosmetic
addition to your vehicle. They help protect your
valuable lights from debris thrown up by traffic in
front of you, those inevitable knocks when offroading or even in the supermarket car park.
HINGED LAMP GUARDS SET
Slatted aluminium lamp guards. Black
nylon coated finish. Brackets pick up on
existing light mounting holes a simple
fitting procedure. All fixings are
stainless steel.
BA 011/4 – Set of four hinged lamp
guards
BA 011FH – Pair of front hinged lamp
guards
BA 004
REAR NUDGE BAR and
LOAD CARRIER
BA 011RH
Hinges to allow carrying of up to
100kgs. Locks into position with pin
and “R” clip. Manufactured in Flat steel 14 gauge with 2 x 90° bends each
side. 11/2" (37mm) diameter tube. Finished in Black nylon. Weight: – 18kgs.
BA 004 – Rear Nudge Bar and Load Carrier
96
www.bearmach.com
BA 011/4
REAR HINGED LAMP
GUARDS SET
Slatted aluminium lamp guards.
Black nylon coated finish. Sold as
pairs and match Lamp Guards
supplied on BA 003A2 Nudge Bar All
fixings are Stainless Steel
BA 011RH – Pair of rear hinged lamp
guards
to order – contact official stockists
CLASSIC
L AND ROVER
RANGE ROVER
S IDE S TEPS
BA 092
All Bearmach side steps are
designed not only to ease entering
and exiting the vehicle, but also
help to protect the vehicle from
scuffs, dings and other annoying
marks picked up through everyday
use. Easily fitted to the chassis of
the vehicle, with minimal
modification (underneath vehicle),
the sturdy steps also contribute to
the vehicle’s appearance.
SIDE
STEP WITH
ALUMINIUM
TREAD
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Steel frame construction
galvanised coating with
aluminium tread plate and rubber
edge moulding.
Easy to install as it picks up on body
mounting bolts in the chassis, and it is only
necessary to drill two further holes on each side
to ensure you have a very solid chassis mounted
side step. (Not LSE Range Rover)
side steps
BA 092 – Side Step with aluminium tread
BA 100S
STAINLESS
STEEL SIDE STEP
Suitable for Range Rover Classic. Made
from mirror polished stainless tube and tread
plate with a raised anti-slip surface. Two holes to
be drilled through outrigger.
BA 100S – Side Step in Stainless Steel (RR Classic)
BA 172
BA 100
SIDE STEP WITH
RUBBER TREAD
REAR STEP
Made from heavy gauge steel and bar,
zinc plated and yellowed to give an extra
durable finish. No drilling required, bolts directly
onto crossmember and can be used on most vehicles with
tow bars fitted. A very functional accessory.
BA 172 – Rear Step
to order – contact official stockists
Galvanised steel frame construction with
a dimpled, moulded rubber tread inset. Also
has a rubber edge moulding.
Easy to install as it picks up on body mounting bolts in
the chassis, and two holes drilled through the outrigger.
(NOT LSE Range Rover)
BA 100 – Side Step with Rubber Tread
www.bearmach.com
97
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
PERSPEX
WEATHERSHIELDS
E XTERIOR S TYLING
Made from perspex,
easily fits to
passenger and
driver’s doors to stop
rain penetration
when on the move.
Reduces draughts yet
still allows good
ventilation.
A range of accessories to improve the
appearance of your Range Rover while offering
practical protection and improvements.
BA 055
Range Rover up to 86, right hand, with vent
BA 055A
Range Rover up to 86, left hand, with vent
BA 056
Range Rover 86 on, 4 door (pair)
BA 165
Range Rover, 2 door RHD
BA 166
Range Rover, 2 door LHD
NOTE: The photograph shows a similar product fitted to a Freelander
BA 078G
BA 178
Range Rover Sunroof Deflector (not illustrated)
exterior styling
GENUINE FRONT SPOILER
Original spoiler, exactly as O.E. (MXC 6828). Lights available as an option
at extra cost.
BA 078G – Genuine Front Spoiler [RR]
BUMPER OVERIDER SET
Plastic overider set
of four pieces to
update your vehicle.
BA 167
BA 079 – Bumper
Overider Set [RR]
BA 079
SIDE MOULDINGS
Available in black with chrome strip.
Supplied in sets or individual pieces. These attractive mouldings not only
enhance the appearance of the car but also provide protection for your
vehicle. No drilling required – easy to fit.
BA 167
BA 168
BA 168A
2 door side moulding
4 door side moulding
4 door side moulding (Chassis FA onwards)
MUD FLAPS
PLASTIC FRONT WINGS
MXC1408R – To suit Classic Range Rover From Vin FA. 4 door RH
MXC1409R – To suit Classic Range Rover From Vin FA 4 door LH
BR 1140R – To suit Classic Range Rover RH
BR 1144R – To suit Classic Range Rover LH
98
MUD FLAP KITS FOR RANGE ROVER
BA 201
Front Mudflap kit*
BA 201/A Rear Mudflap kit*
BR 3092 Mudflap only (each)
* Kits consist of a pair of Mudflaps plus all brackets and fittings.
Note BR 3092 does not include fittings
www.bearmach.com
to order – contact official stockists
CLASSIC
RANGE ROVER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 170
WHEEL ARCH EXTENSIONS
EXTRA WIDE WHEEL ARCH EXTENSIONS
Fibreglass Wheel Arch Extensions to allow larger wheel and
tyre fitments for more effective offroad use. Available in standard
and XL sizes. Some cutting
of arches and
bodywork may be
required.
SPARE WHEEL CARRIER
Conveniently allows the mounting of
the spare wheel to the back of a
Range Rover Classic. Mounts onto
chassis at the bottom and a spring
loaded lever locks the wheel securely
into a central position. Hinges
outwards to allow easy access to the
loadspace.
BA 132A – Spare Wheel Carrier for use on Range Rover Classic models
RANGE ROVER CLASSIC
SNORKEL
A stylish and effective Snorkel to
suit Range Rover Classic.
Manufactured in Fibreglass.
Pipework from the air filter to the
snorkel is not included.
BA 3710
BA
BA
BA
BA
3700
3701
3702
3703
Std Wheel Arch Extension
XL Wheel Arch Extension
Std Wheel Arch Extension
XL Wheel Arch Extension
2
2
4
4
Door
Door
Door
Door
RR
RR
RR
RR
Fibreglass Snorkel for
Range Rover Classic
Classic
Classic
Classic
Classic
BA 3710
Raised Air
Intakes
Fitting a raised air
intake and wading kit
to your vehicle means
cleaner air in dusty
conditions and
improved wading
ability in wet or
flooded conditions.
NOTE: Photograph
shows a similar
product fitted to a
Discovery
WHEEL ARCH EXTENSIONS
These 50mm wide extensions are suitable for 3 and 5 door Range Rovers.
They are made from high impact plastic and are almost unbreakable.
BA 3722 - Range Rover Plastic Wheel arch extensions
to order – contact official stockists
BA 2127 – Mantec
Metal Raised Air
Intake to suit V8/TDI
RR (not carb models)
www.bearmach.com
BA 2127
99
exterior styling
These fibreglass extensions give your vehicle the flared-arch look they fit the
standard vehicle with no further cutting of bodywork. Supplied in black, but
can easily be sprayed to match vehicle colour.
BA 169 Wheel Arch Extensions to fit 2 door model
BA 170 Wheel Arch Extensions to fit 4 door model
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
O FF R OAD P ROTECTION
If you intend to take your Range Rover off-road
you ought to consider the vulnerable areas
underneath the vehicle as well as the bodywork.
Bearmach make a variety of items all
manufactured to the highest standards and
tested to destruction to give you peace of mind
when tackling the roughest terrain.
DIFF GUARD
BA 121
off-road protection
Our diff guards are easily
fitted to a Range Rover
and provide a simple
solution to protect those
all important differentials.
Available in a zinc coating
finish or stainless steel
they are fitted without any
modification to the
vehicle.
Easy to fit, applicable to
all models with standard
axles, Zinc plated for corrosion resistance.
NO DRILLING required.
BA 083B
SUMP GUARDS
Made from Heavy Duty 7 mm Aluminum plate and with 6mm fixing brackets
which are zinc coated for extra corrosion resistance
The Aluminum plate has 9 vent holes (38mm dia) to allow for ventilation,
and to allow excess water to drain.
BA 083A
BA 083B
Fits RR classic
Fits RR classic with nudge bar fitted
NOTE: BA 083B Fits with our own range of nudge bars and A frames only.
NOTE: Photographs shows similar product fitted to other Land Rovers
BA 121 – Diff Guard
BA 083
DIFF GUARD
A new style Diff Guard
that offers improved
protection. Easy to fit
and Zinc plated to resist
corrosion.
BA 125
Wrap around Diff Guard
for Range Rover Classic.
Front and Rear
BA 125
BA 2091G
BA 3662
BA 2091TG
DIFF GUARD and
Slider
This easy to fit product will
not interfere with ground
clearance of vehicle. It is
nearly impossible to lose the
guard due to its mounting
method and one Diff Guard
fits front or rear diff
housing. All bolts, nuts,
washers and instructions
are supplied making it easy for the DIY fitter.
BA 3662 – Diff Guard and Slider
100
ROCK GUARDS
Made from box section steel specifically for the off road enthusiast. They
replace the plastic sills and fix to the chassis to ensure that minimum stress
is put onto the body work. They also help to protect the body work and door
bottoms from damage. Also available with Tree Fender option. Both models
are available galvanised which may be painted to match the colour of your
vehicle or black nylon coated. These rock guards are functional and attractive
and are a must for the off road enthusiast. Range Rover Classic only.
BA
BA
BA
BA
2091
2091G
2091T
2091TG
www.bearmach.com
Rock
Rock
Rock
Rock
Guard
Guard
Guard
Guard
- Black Nylon Coated
- Galvanised finish
with Tree Fender - black
with Tree Fender - galvanised
to order – contact official stockists
CLASSIC
L AND ROVER
RANGE ROVER
WINCHING EQUIPMENT
ROOF RACKS
For the serious off-roader a winch can be an essential
part of the kit. Bearmach stocks a wide range of
winching accessories with winch plates to suit all
models and fitments.
Family holiday, major expedition or just too
much to put inside the vehicle – See Page 110
for our range of Roof Rack Accessories suitable
for ALL Land Rovers
See our range of Winches and Accessories
in the 4x4 ESSENTIALS section
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 3098
PARCEL TRAY / LUGGAGE BASKET
This Parcel Tray features a quick release design. The end tubes can be
positioned to create either flat bed or basket, the platform can be positioned
on a wide variety of roof lines. Manufactured from aluminium, light weight,
aerodynamic and totally rust free.
WINCH PLATE
BA 3098 (RTC 9476) – Luggage Carrier suitable for Range Rover
Chassis mounted winch plate to suit Range Rover Classic, will take 6,000 or
8,000lb Warn winches. Fits discreetly and with only minimum cutting of
spoiler required. (not compatible with Come-Up brand)
ROOF BARS
BA 043A – Heavy Duty
Roof Bars (Non-lockable)
roof racks & towing
Supplied in pairs, these
racks are suitable for
carrying unwieldy items,
such as ladders, and can
double up as ski or bike
racks with a simple
attachment - see below.
BA 2029 – Range Rover Classic chassis mounted winch plate
BA 043A
TOWING EQUIPMENT
Towing is a vital function of a 4x4 vehicle yet can
present unique problems because of the higher ground
clearance. Bearmach offer a comprehensive range of
equipment specifically for Range Rovers …for Towballs
and other Towing Accessories please see page 135
TOW HITCH
Sturdily constructed adjustable tow
hitch. Can be adjusted to five different
heights. Finished in black (tow ball not
included).
Photograph shows similar product
fitted to a Defender.
BA 3127
BA 186
BA 194
WINCH BUMPER
Fabricated from 5mm thick mild steel and finished in black powder coating.
Uses the existing bumper mounting holes on the chassis.
BA 0204
BA 186
Range Rover Classic Tow
Hitch (Adjustable)
Range Rover Classic Tow
Hitch (Fixed)
Range Rover Tow Hitch
95 on (Fixed)
BA 3127 – RR Classic Winch Bumper
to order – contact official stockists
www.bearmach.com
101
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
HEAVY DUTY SUSPENSION
Bearmach stocks a wide range of famous names
Shock Absorbers suitable for all Land Rovers as
well as other essential equipment for power offroading.
shock absorbers
SHOCK ABSORBERS
MONROE – Gas Filled shock absorbers that offer an excellent
replacement for the Oil originals. Durable and suitable for
towing.
OME – Originating from Australia, these shock absorbers are
used for both on and off-road purposes with an off road
bias, and a heavy duty gas capacity.
KONI – Adjustable Gas filled shock absorbers to fine tune to
the desired specification. Suitable for use in both on and
off-road specifications.
BILSTEIN - A top-spec shock absorber offering a firmer ride
and superior on-road handling.
PROCOMP – A very reliable Gas-filled shock absorber for
multi purpose use, and with the capacity for extended
travel where required.
TUFFBACK – Introducing Bearmach’s own range of Tuffback
shock absorbers, designed in the Australian outback to
offer superior performance and durability. With increased
capacity to help with cooling on prolonged use and has the
option of extended length. These shock absorbers will offer
excellent value for money.
DeCARBON – A direct replacement for the oil filled originals
with gas, offering a firm ride with on and off-road
capability.
Classic to 89
STEERING DAMPERS
Make
Range Rover Classic
BR 2255
BR 2255A
Monroe
Decarbon
Bilstein
BR 2255M
BA 2247
BA 2255B
Procomp
BR 2255P
OME
Koni
BA 2255O
BR 2255K
Fill
Extension
+ Tube type
mm
Front
Rear
Front
Rear
Front
Rear
Front
Rear
BR
BR
BR
BA
BA
BR
BR
BR
BA
BA
BR
BR
BR
BA
BA
STC2849
STC2849A
STC2849M
BA 2241
BA 2122
STC2850
STC2850A
STC2850M
BA 2246
BA 2119*
STC2832
STC2832A
STC2832M
BA 2122A
STC2833
STC2833A
STC2833M
BA 2119A
0645
0645A
0645M
2241
2122
1077
1077A
1077M
2242
2119
Classic Air
Oil
Oil
Gas
Gas
Gas
0
0
0
BR
BR
BR
BA
BA
Procomp
Gas
0-25
BR 0645P
BR 1077P
BR 0645P
BR 1077P
BR 0645P
BR 1077P*
-
-
OME
Koni
OME H/Duty
Koni
Decarbon
Gas
Gas
Gas H/Duty
Gas
Gas
0-25
0-25
0-25
50
50
BA
BR
BA
BR
BA
2120
0645K
2120H
0645KL
2249
BA
BR
BA
BR
BA
2121
1077K
2121H
1077KL
2250
BA
BR
BA
BR
BA
2120
0645K
2120H
0645KL
2249
BA
BR
BA
BR
BA
2121
1077K
2121H
1077KL
2250
BA
BR
BA
BR
BA
BA 2121*
STC2850K
BA 2121H*
BR 1077KL*
BA 2250*
-
-
Procomp
Koni Raid
Tuffback
Procomp
Tuffback
Gas
Gas H/Duty
Gas H/Duty
Gas
Gas H/Duty
BR 0645L
0645KH
2532
0645XL
2534
BR 1077L
1077KH
2533
1077XL
2535
BR
BA
BR
BA
BR 1077L
1077KH
2513
1077XL
2515
BR
BA
BR
BA
BR
BA
BR
BA
BR 1077L*
1077KH*
2523
1077XL*
2525
-
BR
BA
BR
BA
BR 0645L
0645KH
2512
0645XL
2514
-
45
50
100
100
-
-
BR
BA
BR
BA
3109
3109A
3109M
2242
2119
Classic 94 0n
O.E.
Armstrong
Monroe
Decarbon
Bilstein
50
3108
3108A
3108M
2241
2122
Classic 89-94
O.E.
Armstrong
2120
0645K
2120H
0645KL
2249
BR 0645L
0645KH
2522
0645XL
2524
BR
BA
BR
BA
BUSH KITS (for pin end only)
BA 0645MK
BA 0645PK
102
Bush kit to suit Monroe shock absorbers
Bush kit to suit Procomp shock absorbers
www.bearmach.com
* Removal of bush cups on axle may be required
to order – contact official stockists
CLASSIC
RANGE ROVER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
HEAVY DUTY BLUE SPRINGS
AIR SPRING CONVERSION KITS
Replaces the air suspension on Classic Range Rovers with the legendary
Bearmach Blue Coil Springs.
The benefits are: Saving in cost
The ability to fine tune your suspension with a large choice of dampers
The ability to increase the Spring rates and/or increase ride height by
specifying different BM Springs.
The Kit comprises:1 x fitting kit
4 x Spring Seats
4 x Spring Retainers
1 x Pair Rear Blue BM Springs
1 x Pair Front Blue BM Springs
BA 2226 – Classic RR Air Suspension to Coils Conversion Kit
Sold in pairs, these heavy duty springs are the ideal solution for those
customers seeking to improve their vehicle’s load carrying capacity.
PART NO
POSITION VEHICLE
HEIGHT
INCREASE
RATE
WIRE
HEIGHT
BA
BA
BA
BA
BA
Rear
Rear
Front
Front
Rear
40mm
20mm
30mm
30mm
30mm
295 Lbs
240 Lbs
195 Lbs
196 Lbs
195.5 Lbs
I8mm
17mm
16mm
16mm
16mm
445mm
413mm
394mm
368mm
413mm
2102
2103
2104
2106
2107
RR
RR
RR
RR
RR
+2" SPRINGS for Off-Road Use
+2" springs to fit standard vehicle but intended for off-road use only (NOT
for towing or load carrying).
RR Classic
50mm
BA 2256 Front
BA 2257 Rear
RR Classic
50mm
AIR ADJUSTABLE
SUSPENSION AID
Designed to fit inside your coil
springs. Can be inflated to a
maximum of 25psi to maintain the
vehicle’s carrying capacity
without spring sag. No
need for expensive
spring mods. Kit
contains PolyAir cells,
inflation line, and cell
seats. Ideal for towing and
eliminates body roll.
Air Suspension Aid to
suit Discovery
DISLOCATION CONES
BA 3650
BA 3651
BA 3652
NTC6106
Front pair of Dislocation Cones
Rear pair of Dislocation Cones
Front Spring Retainer Plate (Each)
Rear Spring Retainer Plate (Each)
suspension
BA 2163
BA 2163A Compressor Kit
Vehicle mounted to enable you to inflate or
deflate the air springs. Complete with all pipes,
low pressure switch etc.
to order – contact official stockists
www.bearmach.com
103
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
Rear Anti Roll Bar
Rear Anti-Roll Bar replaces the original and yet is a more
heavy duty construction. Improves the handling of
your Range Rover Classic.
BA 2157
BA 2220 – Replacement Rear Anti-Roll Bar (Heavy Duty)
BA 2220
CASTER BUSH KITS
Caster bushes allow the axles to remain
in their original positions when raising
the vehicle (i.e. prevents them twisting).
They fit into the radius arms to
minimise any stress on steering
components. Suitable for Defender, RR
Classic and Disco.
TWIN SHOCK
ABSORBER
BRACKETS
BA 2156
BSC 202PC – Caster Bush Kit RR
Classic up to 85
BSC 206PC – Caster Bush Kit RR
Classic from 85
These new twin shock absorber brackets will suit all coil sprung models. The
front unit consists of top bracket, to take the original shock absorber plus an
additional one, and the bottom bracket to support the additional shock
absorber.
The rear unit consists of top shock absorber brackets which bolt through the
chassis and bottom brackets which weld onto the axle case.
BA 2156
BA 2157
BA 2162
POLYURETHANE
BUSH KITS
The fitment of Bearmach
Polyurethane Bushes has
been developed to give
more positive location at
pivot or fulcrum points.
These suspension
components are
particularly
recommended if you
regularly tow or carry
heavy loads.
Single front Tubular Galvanised Shock Tower to suit Range
Rover Classic
Twin Shock Mount Front Range Rover Classic
Twin Shock Mount Rear Range Rover Classic
When fitting to ABS vehicles a certain amount of modification will be
required to move the ABS pump and pipes.
Polyurethane Bushes have been taking over the automotive suspension
industry. The urethane elastomers used have the versatility and elasticity of
rubber yet with the advantages of rigid plastics and metals.
suspension
These bushes have a high capacity to bear tension and compression and have
been tested at temperatures from -100°C to +100°C. They are resistant to
deterioration and swelling caused by oil, grease or chemicals.
ANTI ROLL BARS
Why not combine the heavy duty springs with our range of special suspension
components below.
BA
BA
BA
BA
BA
032
O34A
032D
034D
032L
104
BA 2070
P-U BUSH KIT
BA 2071
P-U BUSH KIT
BFM 237PE P-U BUSH
Range Rover up to 1986
Range Rover 1994
Bump Stop suits front and rear
BR 0695P
BR 1083P
Shock Absorber
Shock Absorber
P-U BUSH
P-U BUSH
HES
BUS E
ALL ILABL Y
A
AV RATEL
A
SEP
Anti Roll Bars, Front, to suit R/R
Anti Roll Bars, Rear, to suit R/R
Spare D Bush
Front Set 2 pieces
Spare D Bush
Rear Set 2 pieces
Spare Link Bush Set 8 pieces
www.bearmach.com
to order – contact official stockists
CLASSIC
RANGE ROVER
BA 3656
REAR SHOCK DROPPER
For lifted vehicles using standard
shock absorbers to gain extra axle
travel with minimum alterations.
BA 3656
BA 3655
SPECIAL PERFORMANCE EQUIPMENT
BA 3661
BA 3659
BA 3670
Make sure you
see our range
of Power
Enhancement
Accessories for
all Land Rover
engines on
page 137
Description
Vehicle
BA 3660
Body Lift Kit +2"
Disco/RR Classic
All the hardware required to achieve a true 2" Body Lift.
BA 3661 Suspension Lift Kit +2"
Disco/RR Classic
Includes spring spacers, brake lines and all necessary
hardware.
BA 3655 Cranked Rear Trailing Arm
Def/Disco/RR Classic 86 on
For use with suspension lifts. Includes rear polyurethane
bushes.
BA 3659 Laminate Chassis Plates
Disco/RR Classic
Welded to existing chassis for increased strength around
spring mounts.
The following Radius Arms are for improved off-road use. Available in
standard, 3° or 6° camber correction – for use with 4" lift kits. Bushes not
included
BA 3670 Front Radius Arm Std Wide
Def/Disco/RR Classic
BA 3671 Front Radius Arm 3° Wide
Def/Disco/RR Classic
BA 3672 Front Radius Arm 6° Wide
Def/Disco/RR Classic
BA 3673 Front Radius Arm Std Narrow RR Classic up to 86
BA 3674 Front Radius Arm 3° Narrow
RR Classic up to 86
BA 3675 Front Radius Arm 6° Narrow
RR Classic up to 86
•
•
•
•
•
BA 3676
REAR ROSE JOINTED
SUSPENSION ARM
For maximum axle articulation these rose jointed trailing arms are the latest
products. Supplied with boots for maximum protection against mud and the
elements. Will fit existing axle and chassis without further modification.
BA 3676
High Air Flow with Excellent Filtration
Designed to Increase Horsepower and
Acceleration
Ideal for extended use in dirty and
dusty off-road conditions
10 Year / Million Mile Limited Warranty
Economical, a K&N Air Filter Will Last the Life of Your Vehicle
BEARMACH
VEHICLE
ENGINE
RTC4683K
ESR1445K
ESR1049K
RR
DIS/RR
DIS/RR
V8 4.0 90 – 94
All Classics 94 on
92 – 94 TDi
605191K
NTC1435K
BA 2309
BA 2315
BA 2316
DIS/RR
RR Classic
RR
RR
DIS/RR
V8 CARB – (Two required per vehicle)
VM Diesel
3.5 (Off Road – clamps to carb)*
3.5 (Off Road – clamps to carb elbow) Airbox connection
300TDI. (Off Road induction kit) 57I
BA 2317
BA 2318
PHE000040K
RR
RR
RR L322
Cleaning Kit
Cone Filter - Clamps to Maf
3.0 TD6 02MY on
Rear Rose Suspension arm
to order – contact official stockists
www.bearmach.com
105
performance
BA 3660
You’ve got the nudge bars, the wheels and tyres
and you think you’re ready for some serious offroading… BUT have you got the performance?
In this section Bearmach offer products to improve
all aspects of your Range Rover from the
powerplant to the the brakes and axle.
If you’ve any queries how you could best set up
your vehicle for some serious off-roading
or competition – call our
experts for some
experienced advice.
SUSPENSION MODS
Ref No
Rear Shock
Dropper
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
SPECIAL PERFORMANCE EQUIPMENT
CONT…
EGR BLANKING KIT
Removes the mechanical EGR system
from 300 TDi or TD5 - giving improved
performance and fuel economy.
BA 2322A
BA 2332A - EGR Blanking kit for
300TDi
PIPERCROSS PERFORMANCE AIR FILTERS
We at Bearmach are pleased to offer this range of Pipercross Performance
Air Filters made exclusively to suit all Land Rovers.
Numerous Champion Race and
filters offer:
Maximised Airflow
Increased Acceleration
Washable and Re-Useable
VEHICLE
All models
Various
Range Rover
Various
Range Rover
Range Rover
Range Rover
Range Rover
Range Rover
1
1
1
1
Rally Teams have proven that Pipercross Air
Additional BHP
Extra Torque
Limited Lifetime Warranty
Model
Cleaning Kit
3.5 V8 Carb
3.5 V8 Carb
V8 Efi
All variants
2.4 TD
2.5 TD
2.5 Tdi
V8 Efi
Year
Off Road
ALL
Clamps to MAF
95 on
01/88 - 11/91
01/88 - 11/91
92 - 10/94
04/86 - 12/94
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
Number
5800
5803
5804
5805
5811
5812
5812
5813
5814
FRONT MOUNTED INTERCOOLERS
Front mounted, large intercooler to suit 200 and 300 TDi - not suitable
for air-con vehicles.
Recommended for use with upgraded vehicles - Vehicle should be tuned to
gain maximum performance after intercooler is added.
FULL SILICONE and
STAINLESS TURBO
HOSE KIT
Includes all necessary components to replace all
existing hoses. Fits with standard and uprated intercoolers (see opposite).
Available for:
BA 2311 - 200 TDI ALL MODELS
BA 2313 - 300 TDI ALL MODELS
REPLACEMENT SILICONE TURBO HOSES
(REPLACES ORIGINAL HOSE ONLY)
Fits standard and uprated intercoolers above.
Available for:
BA 2332 - 200TDi and 300TDi ALL MODELS
HEAVY DUTY
EXPANSION TANK
This cooling system
Expansion Tank is
manufactured in
aluminium for strength
and durability - it directly
replaces the original
ESR63 plastic tank.
BA 2324 – Expansion
Tank
performance
BA 2321 –
Front mounted intercooler
INTERCOOLERS
These replacement intercoolers fit in place of
the existing original units. They allow the air to
be cooled by an extra 50% for a denser charge
and result in up to 25% increase in power.
Available for:
CAMSHAFTS
Designed to increase engine power
BA 2186
BA 2187
BA 2300 – 200TDi RR Classic
BA 2303 – 300TDi RR Classic
106
www.bearmach.com
Camshaft to suit V8
3.5/3.9 (+18 - 22BHP)
Camshaft to suit 4.0/4.6
PERFORMANCE
CRANKSHAFT DRIVE
TRAIN KIT
Consists of forged cam gear, crank
gear and heavy duty timing chain.
(Does not include Camshaft).
BA 2179 – To suit 3.5/3.9 V8
to order – contact official stockists
CLASSIC
RANGE ROVER
MALLORY UNILITE
DISTRIBUTOR
Accurate timing that's maintenancefree.
These Mallory Unilite distributors
give you accurate, maintenance-free
ignition timing. Instead of oldfashioned points systems, they have
photo-optic LED triggering systems
that never vary or wear out. You get
increased rpm potential, improved
combustion, longer spark plug life,
and better cold-weather
starting. Hooking one
up is a simple 3-wire
connection, and they
come with your choice
of adjustable mechanical and/or
vacuum advance, self-lubricating
bushings, and a Super-Duty cap and
rotor.
CARBURETTOR AND INDUCTION MANIFOLD
CONVERSION FOR ROVER 3.5 V8
KIT PART NUMBER – BR 2236
BR 2236R – Needle Valve Conversion Kit - Off Road Use
BR 2236F – Replacement Air Filter
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 5050 – Mallory Unilite
Distributor
BEARMACH is pleased to announce
a new complete carburettor and
induction manifold kit from
V8 DISTRIBUTOR
WATERPROOFING KIT
WEBER. It is suitable for Rover V8 vehicles equipped with S.U. or
Stromberg carburettors from 1970-1987.
The kit features a Weber 4 barrel downdraught carburettor and dual plane
induction manifold. The conversion has been developed for improved engine
Everything you need to protect the
distributor from damp conditions.
Includes boots for coil and
distributor.
torque and fuel economy.
Although calibrated for Range Rover 3.5 models, it is also suitable for many
BA 2840 – V8 Distributor
waterproofing Kit.
other Rover V8 applications, and for those wishing to carry out engine tuning
modifications. For applications other than Range Rover 3.5 models,
calibration changes/adjustments may be necessary.
This conversion can be carried out by a competent D.l.Y. mechanic (with
basic tool kit), and comes complete with detailed fitting instructions, covering
various models.
The kit comprises of: Carburettor; Manifold; Air filter; Throttle linkage*;
Fuel line connections/Fuel filter; Engine breather/pulse air system; Hose
connections; All necessary gaskets, seals and fixtures.
*Automatic transmission vehicles will require supplementary kick down
PERFORMANCE EXHAUST
This stainless steel exhaust will improve overall performance of V8
Range Rover engines and is supplied complete with extractor manifolds.
Slightly more expensive than a standard exhaust but well worth the
initial expense.
The exhaust in the photo is a Range Rover fitment
HEAD GASKETS
BA 039
BA 2160
BR 3178C V8 composite head gasket. To suit 3.5
ETC7819C Composite head gasket 1.2mm thick. To suit 3.9 and 4.2
engines.
BA 2161
to order – contact official stockists
Extractor manifold to suit Range Rover V8 3.5
To suit 3.5 Range Rover V8 (complete with extractor
manifold)
To suit 3.9 Range Rover V8 (complete with extractor
manifold)
www.bearmach.com
107
performance
linkage kit - PART NUMBER BR 2236/A
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
PERFORMANCE
FLY WHEELS
Performance flywheel.
These lightweight
performance flywheels
come balanced and
ready to fit to your
tuned V8 engine. Uses
91/2" clutch
BA 2031 – Flywheel
to suit V8 engines
CLUTCH RELEASE
BEARING
HEAVY DUTY
STEERING PARTS
Heavy duty metal clutch release
bearing. The metal sleeved clutch
release bearing uses the older
specification clutch bearing and a
metal sleeve to proved increased
durability.
These Steel Track Rods
are rally proven. Ideal for the off-road enthusiast and come complete with
BM greaser ball joints.
Features: No steering damper required. The heavy steel takes stress off the
ball joints. Rods and joints last longer.
BR 2295M – Metal clutch release
bearing.
BA 220 – To suit Range Rover
BA 222 – To suit Range Rover from ‘93
HEAVY DUTY
ADJUSTABLE BALL
JOINTS
Adjustable rear differential
ball joint. Just take up the
slack as it wears.
Supplied without gaiter.
Suitable for Defender,
Discovery and Range Rover
Classic.
TRE 76RS – Heavy Duty
Ball Joints (Adjustable)
TRE 76RS
HEAVY DUTY HALF SHAFTS
Increased strength shafts for longer durability. Range Rover Classic models
require fitment of Defender CV joints and driving members.
Heavy duty half shafts
BA 5752 RR Classic
BA 5753 RR Classic
Front
Front
LH
RH
23/24 Spline
23/24 Spline
POWER STEERING
RESERVOIR
axle & steering
Manufactured in aluminium for
strength and durability - this power
steering reservoir is a direct
replacement for the original.
BA 225
BA 2323 – Power Steering
Reservoir
QUICK RATIO STEERING BOXES
29 turns lock to lock. These Steering Boxes offer a quicker and sharper
response when needing to turn to full lock
BA 225 – RHD (RR Classic)
108
BA 226 – LHD (RR Classic)
www.bearmach.com
to order – contact official stockists
CLASSIC
L AND ROVER
RANGE ROVER
A.R.B. AIR LOCKER DIFFS
A manually lockable differential which is operated at the driver’s discretion
by the push of a button. Locking and unlocking of the ‘diff’ is extremely rapid
and can be achieved at any vehicle speed.
Installation involves bolt in replacement
of the original equipment
differential centre, an air
compressor and in-vehicle
switch. Can be fitted to
both front and rear axles
without compromising onroad performance.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CROWN WHEEL
4.1:1 Crown Wheel and Pinion, suitable for off-road use where high ratio
(low speed) manouevrability is required. Replaces standard set version on fine
spine axles. May need spacer ring for other applications.
BA 5700 – Crown Wheel
BA 205
To suit Rover Differential. 10 spline*
BA 205A To suit Rover Differential. 24 spline*
* Please specify spline type when ordering.
HEAVY DUTY DRIVING MEMBERS
Heavy duty driving members with screw on dust cap. Direct replacement for
original member with superior material specification, and longer splines.
NOTE: All A.R.B. Diff Lockers require compressor which is available
separately, order ref: – BA 215
The Detroit Locker is a fully
automatic locking traction differential
that is well known for premium
performance and dependable
operation. Preload devices between
the side gears deliver 100% torque
and power to both drive wheels yet
unlock automatically to permit
necessary wheel speed differentiation.
The Detroit Locker is trouble-free as
it does not require service adjustments
or special lubricants. Easy to install,
no special tools or case modifications required. One year Limited Warranty.
BA 207
To suit Rover Differential. 10 spline, Locker (inc Carrier)*
BA 207A To suit Rover Differential. 24 spline, Locker (inc Carrier)*
* Please specify spline type when ordering.
DETROIT TRUE TRAC
This unit features a gear-type limited
slip design (no clutch or friction plates
to wear out). Its positive gear action
automatically splits the torque with
none of the steering problems
associated with other traction ‘diffs’.
Power transfer is so smooth that it is
unnoticeable through the steering
wheel when fitted in front drive
steering axles.It performs as a
standard differential on normal
highway driving – then automatically engages when needed in wet, muddy or
icy conditions.
Truetrac Diff Locker
BA 209
to suit Rover Differential (10 spline – Rear)
BA 209F to suit Rover Differential (10 spline – Front)
BA 209A to suit Rover Differential (24 spline – Rear)
BA 209AF to suit Rover Differential (24 spline – Front)
FTC859A
Heavy Duty Driving Member
to suit Defender,
Disco and RR Classic
WHEEL ADAPTER SET
To convert the stud pattern of the wheels
fitted to your vehicle to allow fitment
of different wheels.
BA 3413
Wheel Adapter set (4) converts the
Disco 1, RR Classic or Defender
wheel stud pattern to that of a P38
RR or Discovery 2. (Not suitable for
RR/Disco pre 92). Some vehicles may
require extended plastic arches.
BA 3415
Converts DI2/P38 RR to stud pattern of L322
BA 3413
Note: for use on air sprung Classic Range Rover extended bump stops may be necessary
when fitting some wheels (eg 18" hurricane)
WHEEL SPACERS
Kit of 4 Spacers in alloy with all
studs and nuts
BA 3410
30mm RR Classic
DIFF LOCK SPACER RING
Required to allow fitment of above Diff Locks on vehicles with a 4:7:1 ratio
diffs. Includes extended bolts. To suit relevant vehicles.
BA 205S
Spacer Ring
to order – contact official stockists
www.bearmach.com
109
axle & steering
DETROIT DIFF LOCKER
performance / brakes
accessories
L AND ROVER
RANGE ROVER
C
SS C
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
SPECIAL PERFORMANCE EQUIPMENT
– BRAKES
SLOTTED and DRILLED BRAKE DISCS
KEVLAR / CARBON FIBRE BRAKE PADS
Bearmach are now able to offer Kevlar/Carbon fibre composite brake pads.
These have been tested on our vehicles for a year and we have noticed:
NO squealing
LESS Wear on Brake discs
30% Improvement in braking performance
All pads are supplied in sets all fitted with anti-squeal pads and sensor wires
(which may be removed if not required)
The ultimate in Braking Performance
These Ultra Heavy Duty Discs offer additional durability and improved
stopping power. Designed with Police, Ambulance and Military in mind these
Brake Discs are directionally slotted and cross drilled (left/right).
INCREASES Pad Bite REDUCES Fade DELIVERS exceptional braking performance. All sold as matching pairs. Currently available to fit the following:
Currently available to fit the following:
Part No
OE No
Vehicle
BA 2194
STC9190K
Range Rover
BA 2197
STC9189K
Range Rover
BA 2198
STC1276K
Range Rover
BA 2199
STC2956K
Range Rover
& Disco – Front
& Disco – Rear
& Disco – Rear
– Front
Part No
OE No
Vehicle
BA 2203
BA 2204
BA 2205
FRC7329S
FTC902S
FTC1381S
RR
RR
RR
BRAIDED BRAKE HOSE
Braided Stainless Steel Brake Hoses are available to replace the standard
rubber flexible hoses and offer a more durable alternative. TUV approved.
Part No
Vehicle
BA
BA
BA
BA
Range
Range
Range
Range
210*
211*
216*
217*
Hose Qty
Rover
Rover
Rover
Rover
Classic (UNF)
Classic (Metric) Non ABS
92-94 with ABS
90-92 with ABS
5
5
6
6
Please specify exact model when ordering.
*Available from stock 50mm extra length. (Add 'L' to ref. no. when ordering)
Others sizes are available at special order.
110
www.bearmach.com
to order – contact official stockists
CLASSIC
SPECIAL EQUIPMENT
– ELECTRICAL
L AND ROVER
RANGE ROVER
I NTERIOR A CCESSORIES
IGNITION
LEAD SETS
FOR V8
ENGINES
It’s all very well having the best vehicle for
some off-road adventures but here’s a few
creature comforts to enhance your Range
Rover’s interior.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
interior accessories
BRA 2001 – To
suit early 4.0L and
4.6L up to XA
BRA 2002 – To
suit late 4.0L and
4.6L from XA
NEW!!
HALO H4
UNITS
Bearmach stock a
selection of lights
for the Defender,
Series 3 and classic
RR. Not E marked.
BA 077
DOG GUARD for Range Rover Classic
BA 070C – Crystal Clear H4 Unit
BA 070HI – Halo Ions Gold Effect H4 Unit
BA 070HC – Halo Crystal Clear H4 Unit
Made from 2" wire mesh welded to frame for a rattle free construction. Black
nylon coating. Easy to install and remove. Rear seat can be folded down
without removing Dog Guard. Will fit both 2 and 4 door models.
BA 077
BA 077/4
Fits models up to 1986
Fits models from 1987 to 1994 (OEM)
BA 087
GUN RACK
BA 087 – To fit dog guards for Range Rover.
ELECTRIC FAN KITS
The electric fan kit replaces the belt driven unit. Simply remove fan from
water pump hub, then fix electric fan through radiator with special fixings.
BA 031
BA 031A
BA 031T
An easy clip on addition to the discovery dog guard. Supplied as pairs, these
brackets allow guns or umbrellas to be carried one above the other.
INERTIA REEL
SEAT BELTS
Secondary Electric fan Kits. Suitable for all Land Rovers
Primary Double Electric fan Kit. For extra cooling
Thermostat to suit above
LUMENITION KITS
Do away with the points and
replace with breakerless
ignition system for increased
efficiency and accurate tuning.
3 point cap and diagonal.
Can be used as
replacement for Range
Rover Classic or as retro
kit for earlier models.
Early vehicles may require
additional brackets.
BA 137– V8 fitting kit
To fit the above kit you will
also need:
BA 140– Ignition module
to order – contact official stockists
SEAT BELTS
BA 188A – Suit rear Range Rover Classic
BA 187 – Lap belt
www.bearmach.com
111
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CLASSIC
STEERING WHEELS
We have a range of
quality, stylish steering
wheels from MOMO,
RAID, SPARCO and
MOUNTNEY for all
Defender applications –
together with bosses to
suit. More styles are being
added every day.
interior accessories
MATS
Hard-wearing Mat sets specifically shaped to suit all Range Rovers. All mats
have in-built heel pads on both sides for longer life. Please specify colour
when ordering.
BA
BA
BA
BA
BA
BA
BA
048
048A
048B
058
059
062
063
3 Piece mat set in Brown – 2 Door
3 Piece mat set in Beige – 4 Door
3 Piece mat set in Grey – 4 Door
Rear cargo area mat in Grey – 4 Door
Rear cargo area mat in Brown – 2 Door
Rear cargo area waterproof mat in Grey
Rear cargo area waterproof mat in Brown
SOUND PROOF FELT
Sound deadening felt. Adds extra
sound proofing in the cab and under
bonnet area. Does not include glue.
BA 2009 – Roll of sound-proofing
felt (54” x 36”)
3 SPOKE WHEEL
Three spoke design chrome or black spokes
available
BA 150
14" Vinyl wheel.
BA 151
15" Leather wheel
Steering Wheel Boss to suit Range Rover Classic
up to 1986
BA 155
Steering Wheel Boss to fit BA 150
and BA 151
MOUNTNEY
A plastic moulded steering wheel - especially designed for comfort with an
ergonomic grip area.
BA 3202 Black moulded steering
wheel - 340mm
A classic wood wheel with high
gloss finish and 3 chrome spokes
BA 3203 Wood Rim Steering
Wheel - 350mm
WATERPROOF SEAT
COVERS
Pair of Waterproof Seat Covers
available in Grey. Tailored fitting,
quickly and easily fitted and removed.
Ideal for farmers, builders, surveyors
and all outdoor activities.
BA 064 – To fit Range Rover Classic
SEAT HEATER
MOMO
Seat Heater available built-in to
new seats or DIY kit to fit inside
your seats. With full fitting
instructions wiring loom and
switches. Sold for pairs of seats
only.
These are quality genuine leather
sports steering wheels ideal for
the rigours of off-roading.
BA 3207 Black Leather Wheel
- 350mm
BA 3208 Black Alcantara
Wheel - 350mm
BA 2410 – Heater (pair)
Steering Wheel Bosses
BA 2410
112
BA 3206
www.bearmach.com
Boss to suit steering wheels BA 3202 – BA 3208
on RR Classic up to 1994
to order – contact official stockists
P38
L AND ROVER
RANGE ROVER
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
STC8501AA
BA 142S
‘A’ FRAME for P38
p38 range rover
‘A’ frame and spoiler protector to
suit Range Rover P38.
Manufactured from 2" tube.
BA 142S ‘A’ Frame finished in
Polished stainless Steel
BA 142
‘A’ Frame in Black
Nylon Coated finish (Not illustrated)
STC8500AA
O.E.M. SOFT NUDGE BARS
These bars are as fitted as original equipment. They offer robust vehicle protection as
they are a steel frame construction covered in a thick rubber coat to absorb impact.
More pedestrian friendly than other bars. Easily fitted to the following models.
STC8500AA – Soft Full Bar to fit P38 Range Rover
STC8501AA – Soft ‘A’ Bar to fit P38 Range Rover
BA 141
BA 141
P38 HINGED LAMP GUARD SET
Aluminium construction and black nylon coated.
All fixings are in stainless steel. Set of 6 pieces,
two at the front (designed for use on vehicles with
or without power wash) and four pieces at the
rear for the split lights.
All are hinged to make cleaning of lights easier.
Minimum drilling is necessary to the bodywork.
STC8503AA
STC8504AA
O.E.M. LAMP GUARDS
These Lamp Guards are as supplied as original equipment. To suit P38 Range Rovers they are
manufactured in high density plastic. Supplied in pairs complete with all fittings.
STC8503AA – OEM P38 Range Rover Headlamp Guards (pair)
STC8504AA – OEM P38 Range Rover Rear lamp Guards (pair)
BA 141 – Hinged Lamp Guard Set to suit P38
to order – contact official stockists
www.bearmach.com
113
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
P38
RECESS GUTTER
MOUNT SPORTS RACK
BA 3094
Made from perspex,
easily fits to
passenger and
driver’s doors to stop
rain penetration
when on the move.
Reduces draughts yet
still allows good
ventilation.
This contemporary design
incorporates an aerodynamic
cross-bar and end supports,
virtually eliminating all wind
noise. Easy to install tighten 4
locking bolts and you're done. A
built-in buffer strip protects the
load and cross bar. Manufactured from injection moulded glass filled
composites and extruded aluminium, light, strong and totally rust free.
BA 3094 – P38 Range Rover Sports Bars
BA 3094A (STC8507) – Original Equipment Roof Bars with recess mounting
BA 134
p38 range rover
PERSPEX
WEATHERSHIELDS
BA 3140
For Range Rover P38 front (pair)
NOTE: The photograph shows a similar product fitted to a Freelander
STAINLESS
STEEL
SIDESTEPS
A new style side step, designed for
P38 and L322 Range Rovers. The side
step has a polished stainless steel plate,
with an aluminium under construction. Rubber
anti-slip strips ensure safer exit and entry to the
vehicle. TUV approved.
BI-CHROMATIC CONVERSION KIT
BA 134 – Stainless Steel Sidestep to suit Range Rover P38
Bi-Chromatic Conversion Kit to suit P38 Range Rover (Including Tail Lights
x4, Repeater and Bulbs x 2, Front Indicators.
BA 5150 – Bi-Chromatic Conversion Kit
BA 111S
STAINLESS STEEL
SIDE STEP [P38]
Stainless steel tube and tread plate polished to a
mirror finish and with a raised anti-slip surface. No
holes to be drilled.
TOWBAR ELECTRIC KIT
BA 111S – Range Rover P38 Side Step in Stainless Steel
N-Type Towbar Electric Kit which connects to the vehicle’s existing plug.
BA 5540 – P38 N-Type Towbar Electric Kit
SIDE STEP FOR P38
Dimpled tread pattern for a non-slip
surface. The sturdy steel frame is
galvanised and encased in rubber for
the ultimate durable finish. No holes
to be drilled.
BA 111 – Range Rover P38 Side
Step encased in Rubber
BA 111
114
www.bearmach.com
to order – contact official stockists
P38
L AND ROVER
RANGE ROVER
SPECIAL PERFORMANCE EQUIPMENT
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Legendary Performance Filters read
why you ought to have one on page
89.
BA 2317
Cleaning Kit
For your P38 please order:
ESR341K
K&N Filter
ESR4238K
K&N Filter
These are alternatives please check before ordering.
AIR SPRING CONVERSION KITS - for Range Rover P38
This Air Suspension to Coils Conversion kit for the Range Rover P38
(P38)replaces the original Air suspension with the famous Bearmach Blue
The Benefits are: Avoids costly repairs
Offers a more reliable system
The ability to fine tune your suspension both in terms of dampers and coils
to suit your particular requirement
Once fitted with our Air Spring conversion kits you can be assured of totally
reliable performance.
The Kit comprises:1 x Electric harness
4 x Spring Seats
1 x Pair Front Blue Springs
1 x Fitting Kit
1 x Pair Rear Blue Springs
2 x Front isolators
2 x Rear isolators
PIPERCROSS PERFORMANCE AIR FILTERS
Numerous Champion Race and
filters offer:
Maximised Airflow
Increased Acceleration
Washable and Re-Useable
BA 5818
BA 5800
Rally Teams have proven that Pipercross Air
BA 2227 – P38 RR Air Suspension to Coils Conversion kit
Rear Anti Roll Bar Kit
Additional BHP
Extra Torque
Limited Lifetime Warranty
Our Anti-Roll Bar Kits will transform the handling of your
Range Rover P38. Supplied with instructions, brackets, nuts and
bolts etc. Make your vehicle go round corners like a go-kart.
Pipercross filter for P38 - all models from chassis no. TA
Pipercross filter universal cleaning kit
BA 2222 – Rear Anti-Roll Bar Kit
BA 2222
CAMSHAFTS
Designed to increase engine power
BA 2187 Camshaft to suit 4.0/4.6
Gear ring in photo is
not included
PERFORMANCE EXHAUST
This stainless steel exhaust will improve overall performance of V8 Range
Rover engines and is supplied complete with extractor manifolds. Slightly
more expensive than a standard exhaust but well worth the initial expense.
BA 2190 To suit P38 Range Rover 4.0/4.6 (single pipe)(from cat back)
BA 2191 To suit P38 Range Rover 4.0/4.6 (twin pipe)(from cat back)
BA 2191A Sports system to suit Range Rover P38 4.0/4.6, with finishing
pipes (to fit from Cat back) – Twin pipes only (as shown).
to order – contact official stockists
www.bearmach.com
115
p38 range rover
Coil Springs.
accessories
L AND ROVER
RANGE ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
P38
HEAVY DUTY SUSPENSION
We always stock a wide range of famous names Shock
Absorbers suitable for all Land Rovers as well as other
essential equipment for power off-roading.
SPECIAL PERFORMANCE – BRAKES
Upgrade braking
performance with
the following
products
specifically listed
for P38 Range
Rovers. See page 110
for a full description of these
products.
KEVLAR / CARBON FIBRE BRAKE PADS
Part No
BA 2195
BA 2196
OE No
STC1879K
STC1880K
Vehicle
Range Rover P38 – Rear
Range Rover P38 – Front
BRAIDED BRAKE HOSE
Part No
Vehicle
BA 212
BA 212A
Range Rover P38 (vehicles up to VA)
Range Rover P38 (vehicles from VA)
Hose Qty
6
6
p38 range rover
Please specify exact model when ordering.
SLOTTED and DRILLED BRAKE DISCS
All sold as matching pairs. Currently available to fit the following:
SHOCK ABSORBERS
See page 102 for descriptions of the various shock absorbers
Make
O.E
Armstrong
Monroe
Bilstein
Koni
Tuffback
Tuffback
Fill
+ Tube type
Oil
Oil
Gas
Gas
Gas
Gas H/Duty
Gas H/Duty
Extension
mm
0
0
0-25
0-25
50
P38 Range Rover
Front
Rear
STC1881
STC1882
STC1881A
STC1882A
STC1881M
STC1882M
BA 2122B
BA 2119B
STC1882K
STC1881K
BA 2540
BA 2541
BA 2542
BA 2543
STEERING DAMPER
ANR2640
Armstrong Steering Damper to suit P38
Part No
OE No
Vehicle
BA 2206
BA 2207
NTC8780S
NTC8781S
P38
P38
WHEEL ADAPTER SET
To convert the stud pattern of the
wheels fitted to your vehicle to allow
fitment of different wheels.
BA 3414
BA 3414
Converts DI2/P38 RR to stud
pattern of L322
WHEEL SPACERS
Kit of 4 Spacers in alloy with all
studs and nuts
BA 3408
30mm RR P38
A.R.B. AIR LOCKER DIFFS
A manually lockable differential which is
operated at the driver’s discretion by the
push of a button. See page 109 for a full
description.
BA 204 To suit Range Rover P38.
BM POLYBUSH KITS
BA 215 Compressor as required
for all ARB Diff Locks
See page 104 for a full description of our Polybush kits – and for your P38
please order:
BA 205S Spacer Ring
BA 2074
RBX101340P
116
P-U BUSH KIT to suit Range Rover P38
Panhard Rod P-U BUSH for RR P38
www.bearmach.com
to order – contact official stockists
P38
RANGE ROVER
HEAVY DUTY RUBBER
MATS
These quality rubber mats are
strong and waterproof. Their weight
ensures that they do not move about
in the vehicle and keep original
carpets clean.
BA 3508 – Pair Rubber Mats for
P38 (Front)
BA 3509 – Pair Rubber Mats for
P38 (Rear)
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DIFF GUARD - Slider Type
A very heavy duty product made from 6mm steel to offer sturdy protection
for P38 Range Rovers. Zinc plated to resist corosion. Bolts directly to the diff
mounting bolts to protect case as well as acting as a slider.
p38 range rover
BA 3133 – Diff Guard Slider Type - Front
BA 3134 – Diff Guard Slider Type - Rear
MAT SET for Range Rover P38
Velour mats for the passenger area (set of 4)
BA 082 – Grey - Passenger area
BA 082A – Beige - Rear Load Area
BA 082B – Beige - Passenger Area
BA 082C – Beige - Rear Load Area (No Changer)
INTERIOR WOOD
TRIM KIT
O.E.M. DOG GUARD for Range Rover P38
Construction: – Made from 2" wire mesh welded to frame for a rattle free
construction. Black nylon coating.
Features:
Easy to install and remove
Rear seat can be folded down without removing Dog Guard.
Will fit both 2 and 4 door models.
Enhance your vehicle’s
interior with these
beautiful wood trim kits
BA 146 – Wood Trim Kit
to fit Range Rover P38
Available to order and to
match existing wood trim.
BA 143 – Dog Guard to fit Range Rover P38 from 1995
BA 146
BA 3141
GEAR KNOBS
Add a touch of class with
this range of gear knobs.
Either cast in Aluminium
with black printed
graphics or in wood effect
finish which look great
with our interior trim kits
shown above.
MOULDED BOOT LINERS
As effective as usual boot liners but with a difference – these can be rolled up
when not in use and stored in the vehicle. They spring back into shape when
unrolled and they have 4" sides to keep the muck in.
BA 3141
BA 3830
BA 3832
Gearknob in Wood to suit P38
Hand Brake in Wood to suit P38
Moulded Boot Liner for Range Rover P38
to order – contact official stockists
www.bearmach.com
117
range rover L322
accessories
L AND ROVER
RANGE ROVER L322
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 4010
‘A’ FRAME for L322
Brushguard stainless steel. Suits new range Rover L322, fits with BA 4011
and BA 4012. TUV approved.
BA 4010 – ‘A’ Frame in brushguard stainless steel.
O.E.M. LAMP GUARDS
These Lamp Guards are as supplied as original equipment for L322 Range
Rovers. They are manufactured in high density plastic and are supplied
complete with all fittings.
VUB001070 – OEM L322 Range Rover Front
Lamp Guards (pair) 02 - 05MY
VUB001080 – OEM L322 Range Rover Rear
Lamp Guards (pair) - 02 - 05MY
VUB502610 – OEM L322 Range Rover Front
Lamp Guards (pair) 06MY on
VUB001080 – OEM L322 Range Rover Rear
Lamp Guards (pair) - 06MY on
OEM SOFT PLASTIC ‘A’ BARS
These bars are as fitted as original equipment. They offer robust
vehicle protection as they are a steel frame construction covered
in a thick rubber coat to absorb impact. More pedestrian
friendly than other bars. Easily fitted to the following models.
L322 RANGE ROVER
VUB000840 – Soft Full Bar to fit L322 Range Rover (02 - 05MY)
VUB000850 – Soft ‘A’ Bar to fit L322 Range Rover (02 - 05MY)
118
www.bearmach.com
to order – contact official stockists
L322
L322 R ANGE R OVER P ROTECTION
L AND ROVER
RANGE ROVER
The beautiful lines of the new Range Rover deserve to be protected and this
range of stainless steel bars will do the job handsomely and stylishly. Robustly
manufactured in Brushguard stainless steel and all TUV approved. You can
buy the complete set or the individual items.
BA 4012
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SPOILER EDGE PROTECTION for L322
Adds that extra bit of protection to the spoiler by extending beyond the ‘A’
frame. Stainless steel. TUV approved.
BA 4012 – Spoiler Edge Protection
SILL PROTECTION BAR for L322
Looks good by itself but continues the style of the Stainless steel ‘A’ frame
above while adding
sturdy protection to the
side sills of the Range
Rover.
BA 4030
O.E.M. SIDE PROTECTION STRIPS
Supplied as original equipment for L322 Range Rovers, these rubber strips
are easily fitted to aid protection against minor dings and scrapes. With a
chrome insert they are also pleasing on the eye. (Photograph shows similar
product fitted to a Discovery 3)
DGJ000010PMA – Side Protection Strips for L322 Range Rover
BA 4030 – Sill
Protection Bar
REAR BUMPER
PROTECTION
range rover L322
A useful accessory alone
but completes the above
set in style.
BA 4050 – Rear
Bumper Protection
BA 4050
BA 4011
SIDE MOULDINGS
Side moulding kit, finished in black, to help protect vehicle from minor
knocks and scratches. Easily fitted - no drilling required.
BA 4401 – Side Mouldings to suit L322
UNDER-RIDE PROTECTION for L322
Fits neatly with ‘A’ Frame BA 4010. TUV approved.
BA 4011 – Under-Ride Protection
BA 4031
STAINLESS
STEEL
SIDESTEPS
A new style side step, designed for
P38 and L322 Range Rovers. The side
step has a polished stainless steel plate,
with an aluminium under construction. Rubber
anti-slip strips ensure safer exit and entry to the
vehicle. TUV approved.
O.E.M. SIDE TUBES
NEW Genuine Side Tubes. These tubes not only give a rugged,
off road appearance to your vehicle, but also act as a step. As
they are made from large steel tube, they also offer
considerable protection to your Land Rover. Easily fitted and
finished in black.
VUB002510 – Range Rover L322 Side Tubes (Pair)
BA 4031 – Stainless Steel Sidestep to suit Range Rover L322
to order – contact official stockists
www.bearmach.com
119
accessories
L AND ROVER
RANGE ROVER L322
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
C HROME A CCESSORIES
BA 4453
The beautiful lines of the new Range Rover L322 can be enhanced with this
range of quality parts finished in chrome. Each item is robustly manufactured
to withstand the lifestyle of this prestigious 4x4 - and will give your vehicle a
look that will stand out from the crowd.
VUB002200MMM
VUB503650MMM
BA 4450
BA 4454
BA 4451
BA 4453
VUB500920MMM
VUB503880MMM
Side Air Inlet Grilles x2 pieces - ‘02-‘05 (O.E.)
Side Air Inlet Grilles x2 pieces - ’06 MY on (O.E.)
Side Air Inlet Grille x4 pieces - ‘02-‘05 - Stainless
steel covers
Side Inlet Grilles x4 pieces - ’06 MY on - Stainless
steel covers
Bumper cover
Door Handle set 8 pieces (Metal)
Mirror cover (Plastic) - ‘02-‘05
Mirror Cover (Plastic) - 06MY,
L322 E XTRAS
These original
equipment side air
intake grilles are
plastic units that
replace the bodycoloured units fitted
as standard
PERSPEX
WEATHERSHIELDS FOR RR
L322
range rover L322
VUB002200MM
These aftermarket
covers in stainless
steel simply fix
over the fins of the
units fitted as
standard with no
drilling required.
Made from perspex, easily
fits to passenger and
driver’s doors to stop rain
penetration when on the
move. Reduces draughts
yet still allows good
ventilation.
NOTE: The photograph shows a similar product fitted to a Freelander
VUB000610 Perspex weathershields for RR L322 (set of 4)
BA 4412
Perspex weathershields for front RR L322 (pair)
BA 4413
Perspex weathershields for rear RR L322 (pair)
HEAVY DUTY RUBBER MATS
These quality rubber mats are strong and waterproof.
Their weight ensures that they do not move
about in the vehicle and keep
original carpets clean.
BA 4450
BA 3511
Pair Rubber Mats
for L322 (Front)
BA 4451
BA 3512
Pair Rubber Mats
for L322 (Rear)
VUB503880MMM
TOWBAR
ELECTRIC
WIRING KIT
VUH000040 – N+S-Type
to 6a wiring kit which
clips into existing harness
VUH000020 – 13 pin to
6a wiring kit which clips into existing harness
VUH000050 – N+S-Type from 6a wiring kit which clips into existing
harness
VUH000060 – 13 pin from 6a wiring kit which clips into existing harness
120
www.bearmach.com
to order – contact official stockists
L AND ROVER
RANGE ROVER
SPORT
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
RANGE ROVER SPORT
– Original Equipment
The following range of accessories is supplied as original
equipment for the 2005 Range Rover Sport – so you can be
assured of their quality and design.
PHE000112K
K&N Filter for
Range Rover Sport
BA 2317
Cleaning Kit
VUB501930
VUB501920
VCF500120PVJ
VCF500140PVJ
VUB501430
Front Lamp Guards (Plastic) – Set of 2
Rear Lamp Guards (Plastic) – Set of 2
Front Seat Covers
Rear Seat Covers
Tow Bar
range rover sport
High Air Flow with Excellent Filtration. Ideal
for extended use in dirty and dusty off-road
conditions. 10 Year / Million Mile Limited
Warranty. Economical, a K&N Air Filter
Will Last the Life of Your Vehicle.
VUB501930
VUB501920
PIPERCROSS PERFORMANCE AIR FILTERS
We at Bearmach are pleased to offer this range of Pipercross Performance
Air Filters made exclusively to suit all Land Rovers.
Numerous Champion Race and
filters offer:
Maximised Airflow
Increased Acceleration
Washable and Re-Useable
BA 5819
BA 5800
Rally Teams have proven that Pipercross Air
Additional BHP
Extra Torque
Limited Lifetime Warranty
Pipercross filter for Range Rover Sport
Pipercross filter universal cleaning kit
to order – contact official stockists
www.bearmach.com
121
accessories
L AND ROVER
RANGE ROVER SPORT
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
C HROME A CCESSORIES
The Range Rover Sport is already a fully loaded vehicle but it can be further
enhanced with this range of quality parts finished in chrome. Each item is
robustly manufactured to withstand the lifestyle of this prestigious 4x4 - and
will give your vehicle a look that will stand out from the crowd.
BA 4456
BA 4458
VUB503880MMM
EBN500040
Boot Chrome
Door Handle (Metal)
Mirror Cover (Plastic) - 06MY
Sills Scuff Protection in Stainless Steel
BA 4458
VUB503880MMM
BA 4456
range rover sport
EBN500040
PERSPEX WEATHER-SHIELDS
FOR RR SPORT
Made from perspex, easily fits to passenger and driver’s
doors to stop rain penetration when on the move. Reduces
draughts yet still allows good ventilation.
VUB502520 Perspex weathershields (set of 4)
BA 4414
Perspex weathershields – Front (pair)
BA 4415
Perspex weathershields – Rear (pair)
TOWBAR ELECTRIC
WIRING KIT
YWJ500150 – N+S-Type wiring kit which clips into existing harness
YWJ500160 – 13 pin wiring kit which clips into existing harness
122
www.bearmach.com
to order – contact official stockists
FREELANDER
nudge bars
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
F RONT E ND P ROTECTION
All of our black, nylon coated steel Nudge Bars, Bull
Bars and ‘A’ frames give an aggressive
and purposeful look and offer improved
front end protection due to their strength.
Spot light mounting points are also
included on most. The units bolt to the
existing holes on the chassis/bumper
although some cutting of the front spoiler
may be required. Most of the front
protection bars are also available in high
grade, polished stainless steel.
Note: For vehicles fitted with side lift jacks use
extension BA 2140 (Optional).
FULL NUDGE BAR
BFA 1005
Fits all models
Central part made from 2 inch stainless tube. Bolts directly onto front cross
member and floor pan.
For fitment to Airbag models please consult your Land Rover dealer.
BFA 1005 – Freelander Nudge Bar in Stainless Steel
BFA 1002
‘A’ FRAME
Fits all models except V6 up to ’04 facelift
Made from 2 inch diameter stainless tube. Bolts directly to front cross
members and floor pan.
For fitment to Airbag models please consult your Land Rover dealer.
BFA 1002 Freelander ‘A’ Frame in Stainless Steel
BFA 1009 Freelander ‘A’ Frame in Black nylon coated (as BFA 1002)
OEM SOFT
PLASTIC ‘A’
BARS
These bars are as
fitted as original
equipment. They
offer robust
vehicle protection
as they are a steel
frame construction covered in a
thick rubber coat to absorb impact. More
pedestrian friendly than other bars. Easily fitted to the
following models.
BFA 1003
WRAPAROUND NUDGE BAR
Fits all models up to ’04
Central part made from 2 inch tube, with spot light mounting facility. Bolts
directly on to front cross member and floor pan.
BFA 1003 – Freelander Nudge Bar Black Nylon coated.
WRAPAROUND NUDGE BAR with Lamp Guards
Construction as BFA 1003 but with removable Lamp Guards.
BFA 1004 – Freelander Nudge Bar with Lamp Guards Black Nylon coated.
FREELANDER
‘A’ FRAME
STC50413 – Soft ‘A’ Bar to fit 4 cyl Freelander up to 04MY
STC53129 – Soft ‘A’ Bar to fit V6 Freelander up to 04MY
VUB501330 – Soft ‘A’ Bar to fit Freelander from 04MY
Construction as BFA 1003 but consists only the central ‘A’ Frame
BFA 1008 – Freelander ‘A’ Black Nylon coated.
For fitment to Airbag models please consult your Land Rover dealer.
82
www.bearmach.com
to order – contact official stockists
‘A’ FRAME
(HEAVY DUTY)
Not TD4 or V6 – (4 Bolt
fixing)
BFA 1001
Made from 2 inch tube,
with spot light mounting
facility. Black powder
coated. Includes integral
sump/spoiler guard.
Bolts directly on to front
cross member and floor
pan.Now with 5mm
Aluminium sump
protector plates.
FREELANDER
L AND ROVER
L AMP G UARDS
Lamp Guards are more than just a cosmetic addition to
your vehicle they help protect your valuable lights from
debris thrown up by traffic in front of you or from those
inevitable knocks when off-roading or even the
supermarket car park.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
For fitment to Airbag models please consult your Land Rover dealer.
lamp guards
BFA 1001 – Freelander ‘A’ frame, Black. (up to 04MY)
BFA 1006
HEAVY DUTY ‘A’ FRAME AND ALUMINIUM
SUMP PROTECTION
All Models (6 Bolt fixing – for use with removable winch mount)
Heavy Duty ‘A’ Frame with 6 point fixing in highly polished Stainless Steel.
Allows mounting of Heavy duty Sump Guard or Splash Guard. Also has
provision for Winch Mounting Plate.
Bolts on to Front Bumper dumb irons, front cross member and floor pan,
supplied with 5mm aluminium sump protection plates.
For fitment to Airbag models please consult your Land Rover dealer.
BFA 1006 Heavy duty “A” frame, black nylon coated (fits all 4 cyl)
BFA 1007 As BFA 1006 above but to fit V6
NEW STYLE LAMP
GUARDS
REMOVABLE
WINCH PLATE
Winch plate to suit
Freelander Heavy Duty
“A” Frame BFA 1006.
BFA1006W –
Freelander Removable
Winch Plate, black
polyester coated
See our full range of Winches and Winch
Equipment on pages 127 - 131
to order – contact official stockists
An elegant new design of Lamp Guards for your Freelander – fits all models
up to 04MY including V6. Steel construction, finished in polished Stainless
Steel or Black Powder coated. No drilling required, fixes directly to existing
lamp screws.
BFA 3002 – Headlight Lamp Guards in Stainless Steel (pair)
BFA 3003 – Rear Bumper Lamp Guards in Stainless Steel (pair)
BFA 3004 – Rear Lamp Guards (upper) in Stainless Steel (pair)
BFA 3001 – Rear Lamp Guards in Black (set of 4)
www.bearmach.com
83
FREELANDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
2004 LAMP
GUARDS
To suit Freelanders from
2004 on. Steel
construction, finished in
polished Stainless Steel.
No drilling required,
fixes directly to existing
lamp screws.
BFA 3008 – Rear Lamp
Guards in Stainless
Steel (set of 4)
S IDE S TEPS
All Bearmach side steps are designed not only to ease
entering and exiting the vehicle, but also help to protect the
vehicle from scuffs, dings and other annoying marks picked
up through everyday use. Easily fitted to the chassis of the
vehicle, with minimal modification (underneath vehicle), the
sturdy steps also contribute to the vehicle’s appearance.
O.E.M. LAMP GUARDS
The following Lamp Guards are as supplied as original equipment.
lamp guards
STC7962AA
BFA 2009
STC7960
HEAD LAMP GUARDS
REAR LAMP GUARDS
STAINLESS STEEL SIDE STEP
To suit all Freelanders up to 2004.
Manufactured in high density
plastic. Complete with all fittings.
To suit all Freelanders up to 2004.
Easily fitted using existing screw
holes. Manufactured in high density
plastic. Complete with all fittings.
Stainless steel side step to suit Freelander 3 and 5 door models. Made from
high quality stainless steel tube and stainless steel tread plate.
Polished to a mirror finish. All brackets and fasteners used underneath the
vehicle are zinc plated or stainless. Fixes with nutserts in existing holes.
STC7960 – OEM Freelander Rear
Lamp Guards (Set of 4)
BFA 2009 – Freelander Side Step in Stainless Steel
STC7962AA – OEM Freelander
Front Lamp Guards
STC53077
FREELANDER SIDE
STEPS
2004 REAR LAMP
GUARDS
To suit all Freelanders
from 2004 on.
Manufactured in high
density plastic. Easily
fitted using existing screw
holes. Complete with all
fittings.
VUB501400
VUB501390 – 2004 Freelander OEM Front Lamp Guards (Pair)
VUB501400 – 2004 Freelander OEM Rear Lamp Guards (Set of 4)
84
A stylish step for the
Freelander, finished in
black with dimpled rubber
tread. Supplied with
brackets to mount to
mudflap if fitted.
STC7941 – Freelander
Side Steps, Black
STC53078 – Freelander
Side Steps, Stainless Steel
www.bearmach.com
STC53078
to order – contact official stockists
FREELANDER
L AND ROVER
STC7945AA
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BFA 2010
STAINLESS STEEL SIDESTEPS
NEW Genuine Side Tubes. These tubes not only give a rugged, off road
appearance to your vehicle, but also act as a step. As they are made from
large steel tube, they also offer considerable protection to your Land Rover.
Easily fitted and finished in black.
A new style side step, designed for Freelander with a polished stainless steel
plate, on an aluminium under construction. Rubber anti-slip strips ensure
safer exit and entry to the vehicle. TUV approved.
STC7945AA – Freelander Side Tubes (Pair)
BFA 2010 – Stainless Steel Sidestep to suit Freelander
side steps
SIDE TUBES
BFA 2007
BFA 2006
SIDE STEP
These steps have a tubular steel frame
construction with an aluminum tread in a
brushed finish with hi-gloss graphic detail inset.
Fitting is straight forward and all brackets and
fixings are supplied.
BFA 2007 – Aluminium Tread Side Steps
SIDE STEPS
Suitable for 3 and 5 door Freelander.
Galvanised steel construction ensures maximum resistance to corrosion. The flat
edges are encased in rubber. Available with rubber or aluminium tread plate
with dimpled surface for extra grip.
Fixes in to existing holes in subframe with nutserts
BFA 2006 – Freelander Side Step with Rubber Tread
to order – contact official stockists
www.bearmach.com
85
FREELANDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
E XTERIOR S TYLING
BFA 7001
BFA 7100
SIDE MOULDING KIT
Side mouldings designed to fit on lower side of the vehicle. No drilling
required. Protects the vehicle from car park knocks and minor bumps.
BFA 7001 – Side Moulding Kit to suit Freelander 3 Door
BFA 7002 – Side Moulding Kit to suit Freelander 5 Door
PERSPEX WEATHER-SHIELDS
Made from perspex, easily fits to passenger and driver’s doors to stop rain
penetration when on the move. Reduces draughts yet still allows good
ventilation.
BFA 7100 (illustrated) For 3 door Freelander (pair)
BFA 7101 For 5 door Freelander (pair)
BFA 7102 For 5 door Freelander - Rear (pair)
ROOF RACKS
exterior styling
Family holiday, major expedition or just too much to put
inside the vehicle – a robust roof rack is an essential
accessory. Bearmach offer a range of roof racks to suit
all pockets and load carrying requirements.
BFA 2008
BA 3151
STAINLESS STEEL SILL FINISHERS
Add a touch of style and practicality to your five door Freelander.
Manufactured in stainless steel with highly polished tread pattern. Supplied
as a set of four pieces to protect each of the four door sills, complete with
stainless steel screws. No drilling required, simply undo existing plastic sill
and replace with this stainless steel set.
BFA 2008 Stainless Steel Sill Finishers (5 Door only)
FREELANDER ROOF RAILS
These 2mm thick, self adhesive, chrome look letters are available to fit into the
embossed lettering on the rear bumper of any Freelander.
These roof rails are light, elegant and extremely robust. Made from extruded
aluminium, they are both aesthetically attractive and aerodynamic in design,
specifically researched in a wind tunnel in order to minimise the drag and
noise caused by the wind. This railing is to replace the original half-length
railing fitted by the factory. It can be easily fitted on Freelanders with no
roof fittings without drilling the roof.
BFA 3006 – Silver Letters
BA 3151 – Roof Rails for 5 door Freelander
BFA 3006
SILVER LETTERS
86
www.bearmach.com
to order – contact official stockists
FREELANDER
L AND ROVER
TOWING EQUIPMENT
Bearmach offers a range of towing equipment to enhance
the towing capabilities of all the Freelander models.
See page 135 for Tow balls and other
Towing Accessories.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BFA 8002
BFA 9003
FREELANDER ROOF CROSS BARS
Cross Bars to fit Freelander models which are not fitted with roof rails
BFA 9003 – Freelander Roof Cross Bars
BFA 9003A – Freelander Roof Bars adapter - required to fit BFA 9002 to a
3 door model
E Marked
TOW HITCH for Freelander
BFA 8002 – Freelander Tow Hitch
Illustrated with BA 193 (optional) Tow Ball. Bolts to existing holes in
chassis/floorplan.
E Marked
REMOVABLE
TOW HITCH
FREELANDER ROOF CROSS BARS
Cross Bars to fit Freelander models which are fitted with roof rails.
BFA 9002 – Freelander Cross Bars
BFA 8003
roof racks & towing
Removable Tow Ball
which can be quickly
locked into position
with the key provided.
E Marked. Bolts to
existing holes in
chassis/floorplan.
BFA 8003 –
Removable Freelander
Tow Hitch (up to
04MY)
KNK500070 – Towbar
to suit all models
(04MY onwards)
BFA 9001
FREELANDER ROOF TRAY
A sturdy metal construction Roof Tray which will hold all your holiday
paraphernalia securely. Suits Cross Bars BFA 9002 or BFA 9003
ELECTRIC WIRING KIT
BFA 9001 – Roof Tray (includes adapter for BFA 9002)
YMZ101030 – N-Type wiring kit which clips into existing harness
to order – contact official stockists
www.bearmach.com
87
FREELANDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
S PECIAL E QUIPMENT - O FF R OAD
If you intend to take your Freelander off-road you ought to
consider the vulnerable areas underneath the vehicle as well as
the bodywork. Bearmach make a variety of items all
manufactured to the highest standards and tested to
destruction to give you peace of mind when tackling the
roughest terrain.
BA 088
ROCK SLIDERS
BA 084
SILENCER GUARD
Manufactured in 11/2" heavy gauge tubing. 4 point fixing.
BA 084 – Freelander Silencer Protection
The SliderZ produced by DAP are manufactured from 1”dia. steel tubing and
a 3/16” steel, custom Z strip. The mounting brackets and scuttle plates are
.125” and 3/16” steel plate. These provide a secure mounting base. This
product is assembled with a MIG welding process on a jig fixture, to ensure
an exact fit. The materials used for the SliderZ are carefully chosen for their
light weight, high strength features and the design is optimised so that no
drilling is required. The factory jack can still be used with the SliderZ due to
the unique tab located under the z strip which will engage with the jack.
off-road protection
BA 088
Rock SliderZ
RAISED AIR INTAKES
Fitting a raised air intake and wading kit to your
vehicle means cleaner air in dusty conditions and
improved wading ability in wet or flooded conditions.
BFA 6004 – Mantec Raised Air Intake to suit
Freelander V6
88
www.bearmach.com
to order – contact official stockists
FREELANDER
L AND ROVER
WHEEL SPACERS
HEAVY DUTY SUSPENSION – AND
OFF ROAD EQUIPMENT
Kit of 4 Spacers in alloy
with all studs and nuts
We always stock a wide range of famous names Shock
Absorbers suitable for all Land Rovers as well as other
essential equipment for power off-roading.
BA 3404 – 35mm
Freelander
Spacer Kit
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 3409 – 30mm
Freelander
Spacer Kit
POLYURETHANE BUSH KITS
The fitment of Bearmach Polyurethane Bushes has been developed to give
more positive location at pivot or fulcrum points. These suspension
components are particularly recommended if you regularly tow or carry
heavy loads.
These bushes have a high capacity to bear tension and compression and
have been tested at temperatures from -100°C to +100°C. They are resistant
to deterioration and swelling caused by oil, grease or chemicals.
SHOCK ABSORBERS
MONROE – Gas Filled shock absorbers that offer an excellent replacement
for the Oil originals. Durable and suitable for towing.
KONI – Adjustable Gas filled shock absorbers to fine tune to the desired
specification. Suitable for use in both on and off-road specifications.
DeCARBON – A direct replacement for the oil filled originals with gas,
offering a firm ride with on and off-road capability.
Fill
Extension
+ Tube type mm
Front
Monroe
Gas
0
BA 2117
BA 2118
Decarbon
Gas
0
BA 2117D
BA 2118D
Koni
Gas
0-25
BA 2117K
BA 2118K
P-U BUSH KIT
Freelander
SUSPENSION MODS
Freelander
Rear
suspension
Make
BFA 6001
Anti Roll Bar Kit
Our Anti-Roll Bar Kits will transform the handling of your Land Rover.
Supplied with a new thicker front bar, a rear roll bar (which
is not fitted as standard) instructions, brackets, nuts and
bolts etc. Make your vehicle go round corners like a go-kart.
LIFT KIT
Give your Freelander the Ground Clearance for better off road ability. Use
with our Heavy duty 'A' frames which supports aluminum sump guards for
even better protection off road. see page 4
BA 2224 – Anti-Roll Bar Kit
BA 2225 – Freelander 2 inch Lift Kit. (shown with optional tyres)
Use with BFA 6002 Camber Pins
BA 2224
BFA 6002 – Freelander Camber Pins
Allows Camber of wheels to be altered. Ideal for when raising
or lowering the vehicle.
to order – contact official stockists
www.bearmach.com
89
FREELANDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
S PECIAL P ERFORMANCE
A selection of products to improve all aspects of your
Freelander for on or off-road performance – from the
powerplant to the brakes and axle.
BA 2189
BA 2189A
CAMSHAFTS
Designed to increase engine power
•
•
•
•
•
High Air Flow with Excellent
Filtration
Designed to Increase
Horsepower and
Acceleration
Ideal for extended use
in dirty and dusty offroad conditions
10 Year / Million Mile
Limited Warranty
Economical, a K&N
Air Filter Will
Last the Life of
Your Vehicle
BA 2189
Camshaft to suit Freelander 1.8 Twin Cam (+25BHP)
BA 2189A Vernier Cam Gear Set to suit BA 2189 (Does not include
camshaft).
BEARMACH
VEHICLE
ESR4103K
ESR4238K
PHE000040K
BA 2317
FREELANDER To fit all 1.8 petrol 2.0 Diesel to 00my
FREELANDER To fit V6
FREELANDER To fit TD4
K&N Cleaning Kit
ENGINE
IGNITION LEAD SETS
performance
BRA 2003 – To suit 1.8 Freelander
Make sure you see our
range of Power
Enhancement Accessories
for all Land Rover engines
on page 137
PIPERCROSS PERFORMANCE AIR FILTERS
We at Bearmach are pleased to offer this range of Pipercross Performance
Air Filters made exclusively to suit all Land Rovers.
Numerous Champion Race and
filters offer:
Maximised Airflow
Increased Acceleration
Washable and Re-Useable
VEHICLE
All models
Freelander
Freelander
Freelander
Freelander
90
Rally Teams have proven that Pipercross Air
Additional BHP
Extra Torque
Limited Lifetime Warranty
Model
Cleaning Kit
1.8
2.0 TD
2.0 TD4
V6
Year
05/98
05/98 - 12/00
11/00
98/05
BA
BA
BA
BA
BA
BA
Number
5800
5815
5815
5816
5818
REPLACEMENT SILICONE TURBO HOSES
(REPLACES ORIGINAL HOSE ONLY)
Freelander TD4 Silicone Hose Kit –3 Ply Reinforced hoses for reduced power
loss. Suitable for all models.
BA 2335 - Silicone Hose Kit for Freelander TD4
www.bearmach.com
to order – contact official stockists
SPECIAL PERFORMANCE EQUIPMENT
– BRAKES
FREELANDER
L AND ROVER
KEVLAR /
CARBON FIBRE
BRAKE PADS
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Bearmach are now able
to offer Kevlar/Carbon
fibre composite brake
pads. These have been
tested on our vehicles
for a year and we have
noticed:
NO squealing LESS Wear on Brake discs 30% Improvement in braking performance All pads are supplied in sets all fitted with anti-squeal pads and sensor wires
(which may be removed if not required)
Currently available to fit the following:
Part No
OE No
Vehicle
BA 2193
SFP100360K
Freelander up to 2000
BA 2193A
SFP000010K
Freelander 2000 MY on
SPECIAL PERFORMANCE EQUIPMENT
– ELECTRICAL
BRAIDED BRAKE HOSE
Braided Stainless Steel Brake Hoses are available to replace the standard
rubber flexible hoses and offer a more durable alternative. TUV approved.
CRUISE CONTROL KIT
BA 2210
The ideal enhancement to help you drive in a more relaxed and comfortable
manner on those longer motorway journeys. It will help reduce fuel
consumption and avoid accidental speeding.
SLOTTED and
DRILLED BRAKE
DISCS
The ultimate in Braking
Performance
These Ultra Heavy Duty
rotors offer additional
durability and improved
stopping power. Designed
with Police, Ambulance and
Military in mind these
Brake Discs are
directionally slotted
(left/right).
The kit is suitable for all TD4 models with electronic throttles. It operates by
intercepting throttle pedal signals and will disengage when you touch the
brake or clutch. Includes fitting instructions, universal wiring loom and
column mounted switches for operation.
BA 5543
Cruise Control Kit to suit Freelander TD4
brakes & electrical
Braided Brake Hose Kit, 50mm extra length to suit all
Freelander models
INCREASES Pad Bite REDUCES Fade DELIVERS exceptional braking performance. All sold as matching pairs. Currently available to fit the following:
Part No
OE No
Vehicle
BA 2209
BA 2209A
ANR49835
SDB101070S
Freelander up to 2000
Freelander from 2000
to order – contact official stockists
www.bearmach.com
91
FREELANDER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
I NTERIOR A CCESSORIES
It’s all very well having the best vehicle for some offroad adventures but here’s a few creature comforts to
enhance your Freelander’s interior.
interior accessories
accessories
L AND ROVER
BFA 4001
MAT SET for FREELANDER
Hard-wearing Mat set specifically shaped to suit the Freelander. All mats
have in-built heel pads on both sides for longer life.
BFA 4001 – Four piece set in Grey.
BFA 5001
DOG GUARD for Freelander
BFA 5001 – DOG GUARD for Freelander
Steel frame construction, with wire mesh for lower and upper parts. Black
Nylon coated. Easily fitted and removed in minutes. Acts as a barrier for any
cargo, and stops damage to seat backs. 5 Door Only.
MOULDED BOOT
LINERS
As effective as usual boot
liners but with a
difference – these can be
rolled up when not in use
and stored in the vehicle.
They spring back into
shape when unrolled and
they have 4" sides to
keep the muck in.
BA 3142
BA 3142
HEAVY DUTY
RUBBER MATS
BA 3506
Bearmach have recently
introduced a new range of
quality rubber mats.
Strong and waterproof, the
weight of these mats
ensures that they do not
move when in the vehicle
and keep the carpet clean.
BA 3506 – Pair Rubber Mats for Freelander (Front)
BA 3507 – Pair Rubber Mats for Freelander (Rear)
SOUND PROOF FELT
Sound deadening felt with peel back adhesive.
Adds extra sound proofing in the cab and under
bonnet area. (Does not include glue)
BA 2009 – Roll of self adhesive sound-proofing
felt (54” x 36”)
Moulded Boot Liner for Freelander (small modification required
if fitted with dog guard). 5 Door Only.
3 POINT SAFETY
HARNESS
BFA 4126
Ideal for competition use or for that
added safety. Mounts on lower
fixings, top mount will need to be
repositioned in vehicle.
BA 2154 – 3 Point Safety Harness
BA 2154
SEAT HEATER
Seat Heater available built-in to
new seats or DIY kit to fit inside
your seats. With full fitting
instructions wiring loom and
switches. Sold for pairs of seats
only.
DELUXE INTERIOR WOOD TRIM KIT
12 piece Wood Trim Kit to fit Manual gearbox Freelander models.
Kit includes: Fascia, Transmission Console and Air Vents.
BA 2410
BFA 4125 Wood Trim Kit (Manual)
BFA 4125A Wood Trim Kit (Auto)
BFA 4126 Deluxe Interior Wood Trim Kit
92
www.bearmach.com
Heater (pair)
BA 2410
to order – contact official stockists
ESSENTIAL EXTERIOR OEM ACCESSORIES
FREELANDER
L AND ROVER
2
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
freelander 2
LRO02408
LRO03685
FREELANDER – Original
Equipment
The following range of accessories is
supplied as original equipment for the
latest Freelander from Land Rover – so
you can be assured of their quality and
design.
LR002408
LR003685
LR003319
LR003840
LR003318
LR002773
Light Guard Front
Rear Light Guards
A-Bar Plastic
Side Tubes Black
Side Tubes S/Steel
Side Steps
LRO03319
LRO03318
LRO02773
LRO03840
to order – contact official stockists
www.bearmach.com
93
FREELANDER
accessories
L AND ROVER
LRO02525
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
2
LRO02521
LRO02481
freelander 2
ESSENTIAL INTERIOR OEM ACCESSORIES
LRO02425
LRO02516
FREELANDER – Original
Equipment
The following range of accessories is
supplied as original equipment for the
latest Freelander from Land Rover – so
you can be assured of their quality and
design.
LR002525
LR002481
LR002483
LR002516
LR002425
LR002521
Door Entry Sills
Rubber Mat Set RHD
Rubber Mat Set LHD
Rubber Rear Mat
Rubber Flexible Load Liner
Dog Guard
Not illustrated:
LR002424 Rigid Load Liner
BA 2461 Front Seat Covers Black
BA 2462 Rear Seat Covers Black
LRO03106 – N+S-Type wiring kit which
clips into existing harness
LR002742 Tow Ball Kit - Swan Neck
LR003556 Fog Lamp Kit
94
www.bearmach.com
to order – contact official stockists
nudge bars
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
F RONT E ND P ROTECTION
All of our black, nylon coated steel Nudge Bars, Bull Bars and ‘A’
frames give an aggressive and purposeful look and offer
improved front end protection due to their
strength. Spot light mounting points are also
included on most. The units bolt to the
existing holes on the chassis/bumper
although some cutting of the front spoiler
may be required.
Note: For vehicles fitted with side lift jacks use
extension BA 2140 (Optional).
‘A’ FRAME WITH
SUMP PROTECTION
‘A’ FRAME
A new styled ‘A’ frame bar (without
sump protection), with 31/2" wide
spot-light mounting plate.
Manufactured in sturdy 2" tube and
Black Nylon Coated. Will fit all
Discovery vehicles except Disco 2.
No drilling required.
BA 117
BA 118S
A heavy duty stylish ‘A’ frame bar with additional sump protection,
and 31/2" wide spot-light mounting plate. Manufactured in sturdy
2" tube. Will fit all Discovery vehicles except Disco 2. No drilling required.
BA 118S
‘A’ frame, In polished stainless steel, with additional sump
protection. Not suitable with BA 2144 winch mount.
BA 118
‘A’ frame, Black nylon
coated for a durable finish,
with additional sump
protection.
‘A’ frame
For fitment to Airbag models
please consult your
Land Rover dealer
For fitment to Airbag models
please consult your Land
Rover dealer
BA 118
BA 102
BA 106CS
WRAPAROUND NUDGE BAR
Based on the new styled ‘A’ frame bar BA 102 but with additional
wraparound wings protection. Finished in highly polished stainless steel, with
31/2" wide spot-light mounting plate. (For fitment from 1994 - 1998, a new
plinth part no. STC 8836AA is also required).
BA 106CS Wraparound Nudge bar with spotlight mounting. Finished in
highly polished Stainless Steel.
DISCOVERY ‘A’ FRAME
‘A’ Frame to fit Discovery 1 and 2. Made of steel
and easy to fit. Includes spotlight mounting brackets. Mounting
points pick up behind crush cans as per the original – some cutting of the
front spoiler is required.
For fitment to Airbag models please consult your Land Rover dealer.
BA 102
56
www.bearmach.com
Discovery ‘A’ Frame in Black Nylon Coated finish
to order – contact official stockists
DISCOVERY
BA 101
BA 106B
DISCOVERY 2 WRAPAROUND NUDGE BAR
Wraparound nudge bar with removable lamp guards. Features spot lamp
mounting brackets. Mounting points and fitting as BA 102.
(Lamp guards not illustrated)
For fitment to Airbag models please consult your Land Rover dealer.
TUBULAR WRAPAROUND
NUDGE BAR
with Integral Sump Guard
A stylish bar with integral Sump
Guard and Spoiler protectors.
Manufactured in 11/2" tube.
Features Spotlight mounting. No
cutting of the front spoiler is
necessary. Will fit Discoveries up to
Disco 2.
BA 101
BA 101S
*
Discovery 2* Nudge Bar in Black Nylon Coated finish
As above but finished in polished Stainless Steel. (No lamp
guards)
(Including vehicles 03MY on wards).
BA 106A
This model is not suitable for use with Winch Mount BA 2144. If you wish to
fit Winch Mount BA 2144 use Nudge Bar BA 106CS (page 56).
BA 106A
BA 106B
FO
LAM R DRIVI
N
PS T
O FIT G
NUD
G
O
PAGE E BARS UR
S
S1
EE
THE
4x4 E 41-142 I
N
SS
SEC ENTIAL
TION
S
Wraparound Nudge bar in Black Nylon Coated Finish
As BA 106A but includes fixed lampguards.
For fitment to Airbag models please consult your Land Rover dealer.
OEM SOFT PLASTIC ‘A’ BARS
BA 103S
DISCO 2 ‘A’ FRAME
Highly polished stainless steel, spotlight mounting included.
To suit Discovery 2 (including vehicles 03MY onwards)
BA 103S
Stainless Steel ‘A’ Bar
to order – contact official stockists
These bars are as fitted as original equipment. They offer robust
vehicle protection as they are a steel frame construction covered
in a thick rubber coat to absorb impact. More pedestrian
friendly than other bars. Easily fitted to the following models.
DISCOVERY 2
STC50021
STC53174
STC50020
STC53173
STC53181
– Soft ‘A’ Bar to fit Discovery 2 pre 03MY
– Soft ‘A’ Bar to fit Discovery 2 after 03MY
– Soft Full Bar to fit Discovery 2 pre 03MY
– Soft Full Bar to fit Discovery 2 after 03MY
– Metal Front Lamp Guards to fit the full bar STC53174
www.bearmach.com
57
accessories
L AND ROVER
nudge bars
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 175
winch bumpers
BA 199
BUMPER WITH INTEGRATED
WINCH MOUNT
WINCH BUMPER [DISCO 2]
Made of 6mm steel folded plate and polyester coated. No drilling or
modification required other than the removal of the front spoiler. The
integrated bumper is fully compatible with the Bearmach aluminium sump
guard (BA 083A).
BA 175 – Bumper with Integrated Winch Mount
Made from 6mm folded steel and powder coated for a durable finish.
Designed specifically for the Disco 2 this winch bumper is extremely strong
yet stylish. Front foglights need to be removed or re-positioned to fit bumper.
Accepts same winches as BA 175.
BA 199 – Bumper with Integrated Winch Mount 99-04
The BA 175 can take the following winches: Warn 6000 or 8000 “M” and
“Mx” series; XD 9000 and the Superwinch X6 & X9 as well as all the TMax range (not come-up winch). Does not suit the Huskey winch.
The BA 175 can be further enhanced by the addition of:
‘A’ FRAME
This ‘A’ frame is easily
added to the integrated
bumper and winch mount
above. Easily bolts on.
Black nylon coated and
with the facility to mount
spot lamps.
BA 175A
WINCHING EQUIPMENT
For the serious off-roader a winch can be an essential part
of the kit.
Bearmach stocks a wide range of winching accessories
with winch plates to suit all models and fitments.
WINCH MOUNT
Chassis mounted
winch plate to suit
Discovery will take
6,000 or 8,000lb
Warn winches. Fits
discreetly and with
only minimum cutting
of spoiler required.
To fit Disco 89-98
BA 175A – ‘A’ frame to
suit BA 175
‘BULL BAR’
This Bull Bar is easily added to the integrated bumper and winch mount
above. Easily bolts on. Black nylon coated and with the facility to mount spot
lamps.
BA 175B – Bull Bar to suit BA 175
SE
FU E OU
OF LL RA R
WIN
NGE
TH CHE
ESS E 4X4 S IN
E
SEC NTIAL
TIO S
N
BA 2144
BA 2144 – Discovery
chassis mounted winch
plate
BA 175B
DISCREET
WINCH PLATE
Suits Discovery 2.
Zinc plated finish,
accepts Warn
6000/8000 or
XD9000 winches. No
BA 176
drilling required but
requires removal of
wire mesh in spoiler and some cutting of spoiler. To suit Disco 99 – 04
(not compatible with Come-Up brand)
BA 176 – Discovery Discreet Winch Plate
58
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
LAMP GUARDS
Lamp Guards are more than just a cosmetic addition to your vehicle.
They help protect your valuable lights from debris thrown up by
traffic in front of you, from those inevitable knocks when off-roading
or even in the supermarket car park.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 105
REAR LAMP GUARDS
BA 104
BA 104A
Made from mild steel with a durable, powder
coated finish, these rear lamp units fix without
drilling, as the brackets slip behind the lamp
units. Sold in pairs.
BA 105 – Discovery Rear Lamp Guards
Made of steel and nylon coated, all brackets are nylon coated, all bolts are
stainless. The front light guards incorporate a power wash cut out designed to
ensure the vehicle’s headlamp washers are not impeded. Units can be
removed for easy cleaning of headlights.
The steel brackets which fix the lamp guards to the body work, pick up off
existing holes, and NO DRILLING is required.
BA 104
BA 104A
Pair of removable Front Lamp Guards to suit Discovery
up to 1999
Pair of hinged Front Lamp Guards to suit Discovery 2
from 1999 - 2002
DISCOVERY 2 – Original Equipment
The following range of accessories supplied as original
equipment for the Discovery Series 2 from Land Rover – so
you can be assured of their quality and design.
STC50026
STC50027
STC53181
Front Lamp Guards in plastic (Set of 2) – up to 03MY
Rear Lamp Guards in plastic (Set of 4) – up to 03MY
Metal Front Lamp Guards to fit the full bar STC53174
(Set of 2) – 03MY on
STC53194
Upper Rear Lamp Guards in plastic (Set of 2) –
03MY on
VUB500520 Lower Rear Lamp Guards in plastic (Set of 2) –
03MY on
STC50243
Spot Lamp Bar, Black Nylon Coated
STC50244
Spot Lamp Bar, Stainless Steel
STC50026
BA 147S
BA 147
STC53194
BA 147S
REAR LAMP GUARDS – [DISCO 2]
Our Rear Lamp Guards for the Disco 2 are available in two different styles.
Choose from either the Black Powder Coated (High level C pillar lights only)
or the Chrome plated Stainless Steel set which also includes protection for
the lower bumper lights. To suit Disco 99 - 2004.
BA 147
BA 147S
Disco 2 Rear Lamp Guards (Set of 2)
Disco 2 Rear Lamp Guards (Set of 4)
to order – contact official stockists
VUB500520
www.bearmach.com
59
lamp guards
FRONT LAMP GUARDS (Discovery Facelift Version)
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
S IDE S TEPS
All Bearmach side steps are designed not only
to ease entering and exiting the vehicle, but
also help to protect the vehicle from scuffs,
dings and other annoying marks picked up
through everyday use. Easily fitted to the
chassis of the vehicle, with minimal
modification (underneath vehicle), the sturdy
steps also contribute to the vehicle’s
appearance.
BA 129
ALUMINIUM
SIDE STEP
A new style side step to fit the
Discovery model. An aluminium
extrusion with rubber tread means that
this step is light weight, strong and durable.
BA 129 – Aluminium Side Step (Extrusion)
side steps
BA 092
SIDE STEP WITH ALUMINIUM TREAD
Steel frame construction galvanised coating with aluminium tread plate and
rubber edge moulding.
Easy to install as it picks up on body mounting bolts in the chassis, and it is
only necessary to drill two further holes on each side to ensure you have a
very solid chassis mounted side step.
BA 092 – Side Step with aluminium tread
BA 100S
STAINLESS STEEL SIDE STEP
Suitable for ALL Discoveries. Made from mirror polished stainless tube and
tread plate with a raised anti-slip surface. Two holes to be drilled through
outrigger.
BA 100S – Side Step in Stainless Steel
STC50032
BA 100
SIDE STEP WITH RUBBER TREAD
Galvanised steel frame construction with a dimpled, moulded rubber tread
inset. Also has a rubber edge moulding.
Easy to install as it picks up on body mounting bolts in the chassis, and two
holes drilled through the outrigger.
(NOT LSE Range Rover)
DISCO 2 SIDE STEP WITH
INTEGRAL MUD FLAP
These OEM side steps are easily fitted to the Disco 2. Manufactured in
Stainless Steel these side steps have the added advantage of an integral front
mud guard to make a practical and aesthetic addition to your Disco 2.
STC50032 – Side Step for Disco 2
BA 100 – Side Step with Rubber Tread
60
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
E XTERIOR S TYLING
A broad range of accessories to improve the
appearance of your Discovery while offering
practical protection and improvements.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SIDE STEP with MUDFLAPS
A very practical sidestep for the Discovery 2, with rubber tread and with a
moulded mudflap integrated into the step at the rear. A high quality original
equipment item.
REAR STEP
BA 172
Made from heavy
gauge steel and
bar, zinc plated and
yellowed to give an extra
durable finish. No drilling
required, bolts directly onto
crossmember and can be used on most vehicles
with tow bars. A very functional accessory. (See the
Towing section for drop plates).
BA 172 – Rear Step
REAR STEP KIT
Rear Step Kit as fitted as original equipment.
Includes hydraulic lift ramp and all necessary
fittings. (NOT for Disco 2).
RTC9505AC – Complete Rear Step Kit.
BA 2067
WHEEL ARCH EXTENSIONS
Fibreglass wheel arch extensions available with or without notches cut out to
accommodate the rubbing strips. Supplied in black but can easily be sprayed
to match vehicle colour.
NOTE: The photograph shows a similar product fitted to a Range Rover
BA
BA
BA
BA
2066
2067
2066A
2067A
Wheel
Wheel
Wheel
Wheel
Arch
Arch
Arch
Arch
Extensions
Extensions
Extensions
Extensions
to
to
to
to
fit
fit
fit
fit
5
3
5
3
door
door
door
door
Disco
Disco
Disco
Disco
(without notches)
(without notches)
(with notches)
(with notches)
WHEEL ARCH EXTENSIONS
Fibreglass Wheel Arch Extensions to allow larger wheel and tyre fitments for
more effective off-road use. Available in standard and XL sizes. Some cutting
of arches and bodywork may be required.
BA
BA
BA
BA
3704
3705
3706
3707
Std Wheel Arch Extension
XL Wheel Arch Extension
Std Wheel Arch Extension
XL Wheel Arch Extension
2
2
4
4
Door
Door
Door
Door
Disco
Disco
Disco
Disco
1
1
1
1
exterior styling
STC50030 – Sidesteps with integrated mudflaps to suit Disco 2
SERVICE KIT
This service kit contain all
fitments needed to restore the
rear step to full working order in
the event of the hydraulic lift failing.
RTC9593AA – Hydraulic lift service
kit for Disco rear step.
XS BODY KIT
Give your Discovery the XS look with this
set of of wheel arch and side mouldings.
Manufactured from high density
plastic with a chrome infill strip and
supplied with necessary fixings.
WHEEL ARCH EXTENSIONS
BA 2060 – XS Body Kit for Discovery
models 89-98 (5 Door only)
BA 3721 - Discovery Plastic Wheel arch extensions
These 50mm wide extensions are suitable for 3 and 5 door Discoveries. They
are made from high impact plastic and are almost unbreakable.
WHEEL ARCH KIT
These Wheel Arch extensions are ideal
when fitting wheels and tyres which are
wider than the bodywork. They fit with
any existing side mouldings and are
manufactured in a high density plastic.
No drilling or cutting required supplied as an O.E. fit.
BA 2069 – Wheel Arch Kit to suit
Disco 2
to order – contact official stockists
www.bearmach.com
61
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SIDE MOULDING –
5 DOOR
BA 2054/
No drilling required.
Attractive functional
accessory to protect and
enhance your vehicle.
BA 2054/
Side Moulding, 5 Door –
Disco 2 only
WIDE SIDE
MOULDING
PERSPEX
WEATHERSHIELDS
Made from perspex, easily
fits to passenger and
driver’s doors to stop rain
penetration when on the
move. Reduces draughts
yet still allows good
ventilation.
NOTE: The photograph
shows a similar product
fitted to a Freelander
BA
BA
BA
BA
2065
2065A
2087
2087A
For
For
For
For
Discovery
Discovery
Discovery
Discovery
BA 2065
up to 1999 (pair)
rear doors up to 1999 (pair)
2 (pair)
2 rear doors (pair)
To fit 3 door Discovery.
Side mouldings designed
to fit on lower side of
vehicle. No drilling
required. Protects vehicle
from car park knocks and
stone chips.
BA 2056
BA 2056 – Wide Side
Moulding, 3 Door
BA 2054
exterior styling
CLEAR INDICATOR KITS
Give your series 1 Discovery a more upto-date appearance with these clear
indicator lenses. Coupled with orange
bulbs (supplied) these kits directly
replace the existing orange lens and
satisfy all legal requirements.
SIDE MOULDING – 3/5 DOOR
No drilling required. Attractive functional accessory to protect and enhance
your vehicle.
All the following Clear lenses are
supplied complete with bulbs.
AMR6511W
300TDi
AMR6512W
300TDi
PRC9306W
200TDi
PRC9307W
200TDi
AMR6509W
200/300 TDi
AMR6510W
200/300 TDi
Front Left
Front Right
Front Right
Front Left
Rear Left (Bumper)
Rear Right (Bumper)
XGB10028
XGB100310L
Side Repeater
Side Repeater
BA 2054 – Side Moulding, 3 Door or 5 Door - Disco 1 only
WINDOW MESH
GRILLES
REPLACEMENT BULBS
These Window Grilles are
the ideal answer if you
need serious protection to
your vehicle’s back
windows for extreme offroading or security
reasons. Manufactured
from pressed steel these
grilles are easily screwed
into position or rivetted
for a more permanent
solution.
BR 1303A
XZQ100190L
BA 5128
Indicator Bulbs in Orange – Front & Rear
Indicator Bulbs in Orange – Side Repeater
Red Bulb suitable for AMR6509W and AMR6510W
MUD FLAPS
Photos show similar product fitted to a Defender
BA 2882 – 3 Piece set for rear load area of
Discovery.
62
P38 style
Disco 2
www.bearmach.com
Essential equipment to prevent
damage from debris thrown up by the
tyres and to minimise water spray
when driving on-road. Made from a
flexible, hi-density rubber, these Kits
consist of a pair of Mudflaps plus all
brackets and fittings. To fit Discovery
models 89-98.
RTC6820 – Front Mudflap kit
RTC6821 – Rear Mudflap kit
to order – contact official stockists
DISCOVERY
O FF R OAD P ROTECTION
If you intend to take your Discovery off-road you really
should consider protecting the vulnerable areas
underneath the vehicle such as the diff, fuel tank, sump,
steering bars etc. Bearmach make a variety of guards to
protect such areas and we are constantly up-dating and
developing new guards for all Land Rovers. Bearmach
underbody protection is designed and manufactured to the
highest standards and will give you peace of mind when
tackling the roughest terrain.
BA 125
Sump
Drag Link
Front Diff
Sills
Rear Diff
Fuel Tank
BA 083B
A new style Diff Guard that offers improved protection. Made from 5mm
steel and finished in zinc and yellow, this HD diff guard wraps entirely around
the diff giving maximum protection. Fits front and rear of all Discos up to
2005. Easy to fit and Zinc plated to resist corrosion.
Diff Guard for Discovery 1 & 2 (not LHD)
Made from Heavy Duty 7
mm Aluminum plate and
with 6mm fixing brackets
BA 083
which are zinc coated for
extra corrosion resistance
The Aluminum plate has 9 vent holes (38mm dia) to allow for ventilation,
and to allow excess water to drain.
NOTE: The top photograph shows a Sump Guard fitted to a Discovery with a nudge bar
fitted and the photograph above shows a Sump Guard fitted to a Defender to
illustrate the vent holes
BA 083A
BA 083B
Fits Discovery & RR classic (will also fit Disco with integral
winch mounting. Will not fit with BA 2029)
Fits Discovery & RR classic with nudge bar fitted
NOTE: BA 083B Fits with our own range of nudge bars and A frames only.
NOTE: Bearmach can often prepare
protective panels to specific
requirements – please phone for details
BA 121
FRONT DIFF GUARD
DIFF GUARD
To suit Discovery 2, Zinc plated. Easy to fit, bolt
on, no welding or drilling required.
Easy to fit, applicable to all models with standard
axles, Zinc plated for corrosion resistance NO
DRILLING required.
BA 121 – Diff Guard
to order – contact official stockists
NOTE: The Diff Guard in the photograph is only coloured
for clarity
BA 121A
BA 121A – Front Diff Guard
BA 121AS – Front Diff Guard in Stainless Steel
www.bearmach.com
63
off-road protection
SUMP GUARDS
HEAVY DUTY DIFF GUARD
BA 125
UNDERBODY
VULNERABLE
AREAS
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DIFF GUARD and
Slider
BA 2130
This easy to fit product
will not interfere with
ground clearance of
vehicle. It is nearly
impossible to lose the
guard due to its mounting
method and one Diff
Guard fits front or rear
diff housing. All bolts,
nuts, washers and
instructions are supplied
making it easy for the DIY
fitter.
BA 3662
BA 3662 – Diff Guard and Slider
RAISED AIR INTAKES
Fitting a raised air intake and wading kit to
your vehicle means cleaner air in dusty
conditions and improved wading ability in wet
or flooded conditions.
BA 083D
VEHICLE
APPLICATION
SAFARI
BRAND
MANTEC
200TDi Disco from JA*
300 TDi Discovery & V8 3.9 (non ABS)
Disco 300 & V8 3.9 with ABS
Disco2 TD5/V8
BA
BA
BA
BA
–
BA 2126M
–
BA 2130A
2125
2126
2126A
2130
* Some vehicles may need modification due to airbox specification
STEERING & DRAG LINK PROTECTOR
6mm thick, very high grade, aluminium front steering and drag link
protector. Easy to fit, NO DRILLING required, will fit with nudge bars
and/or winch plate.
off-road protection
BA 083D – Steering and Drag Link Protector (Disco models 99 - 04)
FUEL TANK
GUARD
6mm thick, very high
grade, aluminium fuel tank
guard for Discovery 2.
With 2" round drain and
ventilation holes. Easy to
fit, NO DRILLING
required, picks up on fuel
tank mounting points.
ROCK GUARDS
Replaces plastic sill and
fixes to chassis to ensure that no
stress is put onto the bodywork.
Protects the bodywork and door bottoms
from damage.
Suits Disco and Disco2.
BA 2091 Black Nylon Coated
BA 2091G Galvanised finish which can be painted to
suit body colour
BA 097 – Fuel tank Guard
WADING KITS
These kits include all you need to protect your vehicle when you encounter
water on your off-road excursions. They consist breather pipes for axles,
gearbox and timing cover.
BA 2167 – To suit 200TDi
BA 2168 – To suit 300TDi
BA 2168A – To suit TD5
64
BA 2091G
BA 097
TREE SLIDING ROCK GUARDS
An evolution of our popular rock guards, now featuring side jacking points
and extra sliding bar which offers increased protection to bodywork as well
as a small step for entry. Available for all the current range in Black coating
or Galvanised.
BA 2091T – Black Nylon Coated
BA 2091TG – Galvanised finish which can be painted to suit body colour
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
ROOF RACKS
TOWING EQUIPMENT
Family holiday, major expedition or just too much to put
inside the vehicle – a robust roof rack is an essential
accessory. Bearmach offer a range of roof racks to suit
all pockets and load carrying requirements.
Towing is a vital function of a 4x4 vehicle yet can present
unique problems because of the higher ground clearance.
Bearmach offer a comprehensive range of equipment
specifically for Land Rover Discoveries …for Towballs
and other Towing Accessories please see page 135
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
ADJUSTABLE AND FIXED HEIGHT
TOWING BRACKETS
BA 3180
GUTTER MOUNTED
ROOF RACK
BA 2172
Roof Rack to suit Discovery I/II.
Securely mounts into the gutter of
all models including those with roof
bars and twin sunroofs. Self
assemble black nylon coated
construction with stainless steel
hardware. Takes up to 50kgs.
BA 3180 – Discovery Roof Rack
ROOF RACK ACCESS
LADDER
Roof Rack access ladder to suit
Discovery I/II. Black nylon
construction. Fits by hooking over
rear door. Two holes need to be
drilled to secure the bottom of the
ladder, by the number plate lamp.
BA 2172 – Discovery Access
Ladder
The Dixon-Bate range of Adjustable Height towing brackets enables the
towing coupling to be easily and quickly adjusted without tools to the right
height to suit the hitch height of the caravan.
Supplied with all bracketry to fit directly onto the vehicle manufacturers
recommended fixing points.
Multi-height adjustment.
All steel construction.
Simple, safe and secure locking mechanism.
Adjust height without tools.
Standard interchangeable slider.
Zinc plated with either bright or black finish.
PART NO
VEHICLE
YEAR/MODEL
BA 186
Discovery
BA 186A Discovery with Coil Spring
BA 186B Discovery with Air Spring
BA 194
Discovery
* = E Marked
TYPE
Disco up to 98 Adjustable*
98 on
Adjustable*
98 on
Adjustable*
up to 1995
Fixed
STC50081
This Parcel Tray features a
quick release design. The
end tubes can be
positioned to create either
flat bed or basket, the
BA 3098
platform can be positioned
on a wide variety of roof
lines. Manufactured from
aluminium, light weight, aerodynamic and totally rust free.
BA 195
ELECTRIC WIRING KIT
BA 3098 (RTC 9476) – Luggage Carrier suitable Discovery
BA 195 – Universal wiring kit
with audible warning
ROOF BARS
Supplied in pairs, these
racks are suitable for
carrying unwieldy items,
such as ladders, and can
double up as ski or bike
racks with a simple
attachment - see below.
BA 3099
BA 3100
roof racks & towing
PARCEL TRAY /
LUGGAGE BASKET
BA 195A – Universal Towing
Bypass Relay
BA 3100
Discovery "High Foot" kit – Lockable (Not Disco 2)
Discovery "High Foot" kit – Non-lockable
to order – contact official stockists
ANR3896 – N-Type wiring kit which clips into existing harness for Discovery
1 - (lead only, socket extra)
BA 3099
O.E.M ELECTRIC WIRING KIT for DISCO 2
Simply clips into connections of existing wiring loom.
STC50081 – N-Type wiring kit for Disco 2
STC50181 – N-Type wiring kit for Disco 2 without front foglights
www.bearmach.com
65
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
HEAVY DUTY SUSPENSION
Bearmach stocks a wide range of famous names
Shock Absorbers suitable for all Land Rovers as
well as other essential equipment for power offroading.
SHOCK ABSORBERS
MONROE – Gas Filled shock absorbers that offer an excellent
replacement for the Oil originals. Durable and suitable for
towing.
OME – Originating from Australia, these shock absorbers are
used for both on and off-road purposes with an off road
bias, and a heavy duty gas capacity.
KONI – Adjustable Gas filled shock absorbers to fine tune to
the desired specification. Suitable for use in both on and
off-road specifications.
BILSTEIN - A top-spec shock absorber offering a firmer ride
and superior on-road handling.
PROCOMP – A very reliable Gas-filled shock absorber for
multi purpose use, and with the capacity for extended
travel where required.
TUFFBACK – Introducing Bearmach’s own range of Tuffback
shock absorbers, designed in the Australian outback to
offer superior performance and durability. With increased
capacity to help with cooling on prolonged use and has the
option of extended length. These shock absorbers will offer
excellent value for money.
DeCARBON – A direct replacement for the oil filled originals
with gas, offering a firm ride with on and off-road
capability.
shock absorbers
Make
Discovery 89-94
STEERING DAMPERS
Make
Discovery
O.E.
Armstrong
BR 2255
BR 2255A
Monroe
Decarbon
Bilstein
BR 2255M
BA 2247
BA 2255B
Procomp
BR 2255P
OME
Koni
BA 2255O
BR 2255K
BA 2119E
QHH100001O
Fill
Extension
+ Tube type
mm
Front
Rear
Front
Rear
Front
Rear
BR
BR
BR
BA
BA
STC2849
STC2849A
STC2849M
BA 2241
BA 2122
STC2850
STC2850A
STC2850M
BA 2246
BA 2119*
BA 2280D
BA 2119C
BA 2281D
BA 2119D
Oil
Oil
Gas
Gas
Gas
0
0
0
BR
BR
BR
BA
BA
Procomp
Gas
0-25
BR 0645P
BR 1077P
BR 0645P
BR 1077P*
-
-
OME
Koni
OME H/Duty
Koni
Decarbon
Gas
Gas
Gas H/Duty
Gas
Gas
0-25
0-25
0-25
50
50
BA
BR
BA
BR
BA
2120
0645K
2120H
0645KL
2249
BA
BR
BA
BR
BA
2121
1077K
2121H
1077KL
2250
BA
BR
BA
BR
BA
BA 2121*
STC2850K
BA 2121H*
BR 1077KL*
BA 2250*
BA 2228
BA 2280
-
BA 2229
BA 2281
-
Procomp
Koni Raid
Tuffback
Procomp
Tuffback
Gas
Gas H/Duty
Gas H/Duty
Gas
Gas H/Duty
45
0-50
100
50-100
BR 0645L
0645KH
2502
0645XL
2514
BR
BA
BR
BA
BR 1077L
1077KH
2503
1077XL
2515
BR
BA
BR
BA
BR
BR
BA
BR
BA
BA 2500
BA 2504
BA 2501
BA 2505
BR
BA
BR
BA
1077
1077A
1077M
2242
2119
Discovery 2
O.E.
Armstrong
Monroe
Decarbon
Bilstein
50
0645
0645A
0645M
2241
2122
Discovery 94 0n
Discovery 2
QHH100001
2120
0645K
2120H
0645KL
2249
BR 0645L
0645KH
2511
0645XL
2524
1077L*
1077KH*
2512
1077XL*
2525
BUSH KITS (for pin end only)
BA 0645MK
BA 0645PK
66
Bush kit to suit Monroe shock absorbers
Bush kit to suit Procomp shock absorbers
www.bearmach.com
* Removal of bush cups on axle may be required
to order – contact official stockists
L AND ROVER
DISCOVERY
BA 2157
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
HEAVY DUTY BLUE SPRINGS
Sold in pairs, these heavy duty springs are the ideal solution for those
customers seeking to improve their vehicle’s load carrying capacity.
PART NO
POSITION VEHICLE
HEIGHT RATE
INCREASE
WIRE
HEIGHT
BA
BA
BA
BA
BA
Rear
Rear
Front
Rear
Front
40mm
20mm
30mm
0mm
0mm
I8mm
17mm
16mm
16mm
16mm
445mm
413mm
394mm
438mm
368mm
2102
2103
2104
2105
2106
90/Disco/RR
90/RR/Dis/Dis2
RR/Dis/Dis2
Disco
RR/Disco
295 Lbs
240 Lbs
195 Lbs
194 Lbs
196 Lbs
+2" SPRINGS for Discovery 2
BA 2231
BA 2232
Front
Rear
Dis2
Dis2
45mm
45mm
+2" SPRINGS for Off-Road Use
+2" springs to fit standard vehicle but intended for off-road use only (NOT
for towing or load carrying).
Discovery 89-98 50mm
BA 2254 Front
BA 2255 Rear
Discovery 89-98 50mm
TWIN SHOCK
ABSORBER
BRACKETS
BA 2156
These new twin shock
absorber brackets will
suit all coil sprung
models. The front unit
consists of top bracket, to take the
original shock absorber plus an additional one, and the bottom bracket to
support the additional shock absorber.
The rear unit consists of top shock absorber brackets which bolt through the
chassis and bottom brackets which weld onto the axle case.
BA 2156
BA 2157
BA 2159
Single front Tubular Galvanised Shock Tower to suit Disco
Twin Shock Mount Front Disco (not Disco2)
Twin Shock Mount Rear Discovery (not Disco2)
When fitting to ABS vehicles a certain amount of modification will be
required to move the ABS pump and pipes.
AIR ADJUSTABLE
SUSPENSION AID
Why not combine the heavy duty springs with our range of special suspension
components below.
BA 032
R/R & Discovery Anti Roll Bars, Front
BA O34A R/R & Discovery Anti Roll Bars, Rear
BA 032D Spare D Bush
Front Set 2 pieces
BA 034D Spare D Bush
Rear Set 2 pieces
BA 032L Spare Link Bush Set 8 pieces
BA 2163
Rear Anti Roll Bar
Rear Anti-Roll Bar replaces the original and yet is a
more heavy duty construction. Improves the handling of
your Discovery.
Air Suspension Aid to
suit Discovery
BA 2163A Compressor Kit
Vehicle mounted to enable you to
inflate or deflate the air springs.
Complete with all pipes, low
pressure switch etc.
BA 2220 – Replacement Rear Anti-Roll Bar (Heavy Duty)
BA 2220
to order – contact official stockists
www.bearmach.com
67
suspension
ANTI ROLL BARS
Designed to fit inside your coil
springs. Can be inflated to a
maximum of 25psi to maintain the
vehicle’s carrying capacity
without spring sag. No
need for expensive
spring mods. Kit
contains PolyAir cells,
inflation line, and cell
seats. Ideal for towing and
eliminates body roll.
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DISLOCATION CONES
BA 3650
BA 3651
BA 3652
NTC 6106
BA 3655
Front pair of Dislocation Cones
Rear pair of Dislocation Cones
Front Spring Retainer Plate (Each)
Rear Spring Retainer Plate (Each)
POLYURETHANE
BUSH KITS
The fitment of Bearmach
Polyurethane Bushes has been
developed to give more positive
location at pivot or fulcrum points.
These suspension components are
particularly recommended if you
regularly tow or carry heavy loads.
Polyurethane Bushes have been taking over the automotive suspension
industry. The urethane elastomers used have the versatility and elasticity of
rubber yet with the advantages of rigid plastics and metals.
These bushes have a high capacity to bear tension and compression and have
been tested at temperatures from -100°C to +100°C. They are resistant to
deterioration and swelling caused by oil, grease or chemicals.
BA 2071
BA 2075
P-U BUSH KIT
P-U BUSH KIT
Disco from 1986-1999
Discovery 2 1999-2004
BR 0695P
BR 1083P
ANR1721P
BR 1754P
P-U
P-U
P-U
P-U
BUSH
BUSH
BUSH
BUSH
Shock Absorber
Shock Absorber
Bottom Bush Rear Disco 94 on
Top Bush Rear
BFM 236P
BFM 237P
BFM 237PE
BR 0374P
BR 0388P
P-U
P-U
P-U
P-U
P-U
BUSH
BUSH
BUSH
BUSH
BUSH
Land Rover Equivalent:
Bump Stop ANR4188
Bump Stop ANR4189
Bump Stop suits front and rear
D Bush NTC7394
D Bush NTC6828
RBX101340P
P-U BUSH
BA 3670
BA 3659
SUSPENSION MODS
Ref No
Description
BA 3655
Cranked Rear Trailing Arm
Def/Disco/RR Classic 86 on
For use with suspension lifts. Includes rear polyurethane
bushes.
Laminate Chassis Plates
Disco/RR Classic
Welded to existing chassis for increased strength.
BA 3659
Vehicle
The following Radius Arms are for improved off-road use. Available in
standard, 3° or 6° camber correction – for use with 4" lift kits. Bushes not
included
BA 3670 Front Radius Arm Std Wide
Def/Disco/RR Classic
BA 3671 Front Radius Arm 3° Wide
Def/Disco/RR Classic
BA 3672 Front Radius Arm 6° Wide
Def/Disco/RR Classic
Panhard Rod Bush for Disco 2
BA 3676
HES
BUS E
ALL ILABL Y
AVA RATEL
A
SEP
REAR ROSE JOINTED
SUSPENSION ARM
For maximum axle articulation these rose jointed trailing arms are
the latest products. Supplied with boots for maximum protection
against mud and the elements. Will fit existing axle and chassis
without further modification.
BA 3676
Rear Rose Jointed Suspension arm
suspension
CASTER BUSH KITS
Caster bushes allow the axles to remain
in their original positions when raising
the vehicle (i.e. prevents them twisting).
They fit into the radius arms to
minimise any stress on steering
components. Suitable for Defender, RR
Classic and Disco.
BA 3656
REAR SHOCK DROPPER
For lifted vehicles using standard
shock absorbers to gain extra axle
travel with minimum alterations.
BA 3656
Rear Shock
Dropper
BSC 206PC – Caster Bush Kit
68
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
AIR TO COIL SPRING CONVERSION
Kit to convert the rear air suspension on Discovery 2 to coil spring
configuration. The kit is supplied with springs and all necessary fittings.
Please note Diagnostic equipment is reuired to change the ECU from AIR to
COIL.
Discovery 2 Rear air to coil spring conversion
performance
BA 2230
SPECIAL PERFORMANCE EQUIPMENT
You’ve got the nudge bars, the wheels and
tyres and you think you’re ready for some
serious off-roading… BUT have you got the
performance?
In this section Bearmach offer products to
improve all aspects of your Discovery from the
powerplant to the the brakes and axle.
If you’ve any queries how you could best set up
your vehicle for some serious off-roading or
competition – call our experts for some experienced advice.
PIPERCROSS PERFORMANCE AIR FILTERS
Make sure you see our
range of Power
Enhancement Accessories
for all Land Rover engines
on page 137
•
High Air Flow with Excellent
Filtration
•
Designed to Increase
Horsepower and Acceleration
•
Ideal for extended use
in dirty and dusty offroad conditions
•
10 Year / Million
Mile Limited
Warranty
•
Economical, a
K&N Air Filter
Will Last the
Life of Your
Vehicle
We at Bearmach are pleased to offer this range of Pipercross Performance
Air Filters made exclusively to suit all Land Rovers.
Numerous Champion Race and
filters offer:
Maximised Airflow
Increased Acceleration
Washable and Re-Useable
VEHICLE
All models
Various
Various
Discovery 1
Discovery 1
Discovery 1
Discovery 1
Discovery 1
Discovery II
Rally Teams have proven that Pipercross Air
Additional BHP
Extra Torque
Limited Lifetime Warranty
Model
Cleaning Kit
3.5 V8 Carb
V8 Efi
2.0 16v
All variants
2.5 Tdi
2.5 Tdi
3.9 V8
All variants
Year
Off Road
Clamps to MAF
09/93 - 06/94
06/94 - 98
10/89 - 10/93
11/93 - 06/94
09/93 - 06/94
98/04 -
to order – contact official stockists
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
Number
5800
5803
5805
5811
5811
5812
5813
5814
5818
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
REF No
ENGINE
ESR1445K
ESR4238K
ESR1049K
605191K
RTC4683K
BA 2318
All 300 TDi engines 94 - 98
Disco 2 All engines
92 – 94 TDi
V8 CARB (Two required per vehicle)
V8I to 94
3.5/3.9 – Clamps onto mass air-flow meter, modifications to
mounting are necessary.
300TDI. (Off Road induction kit) 57I
Cleaning Kit
BA 2316
BA 2317
www.bearmach.com
69
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
REPLACEMENT
INTERCOOLERS
These replacement intercoolers fit in
place of the existing original units.
They allow the air to be cooled by an
extra 50% for a denser charge and
result in up to 25% increase in
power. Available for:
BA 2300 – 200TDi DISCOVERY
BA 2303 - 300 TDi DISCOVERY
BA 2307 - TD5 DISCOVERY
BA 2321
performance
FRONT MOUNTED INTERCOOLERS
Front mounted, large intercooler to suit defender 200 and 300 TDi - not
suitable for air-con vehicles.
Recommended for use with upgraded vehicles - Vehicle should be tuned to
gain maximum performance after intercooler is added.
BA 2307
BA 2321 – Front mounted intercooler
HEAD GASKETS
FULL SILICONE and
STAINLESS TURBO
HOSE KIT
Includes all necessary components to replace all
existing hoses. Fits with standard and uprated intercoolers (see opposite).
Available for:
BA 2311 - 200 TDI DISCOVERY
BA 2313 - 300 TDI ALL MODELS
BR 3178C V8 composite head gasket. To suit 3.5
ETC7819C Composite head gasket 1.2mm thick. To suit 3.9 and 4.2
engines.
REPLACEMENT SILICONE TURBO HOSES
(REPLACES ORIGINAL HOSE ONLY)
Fits standard and uprated intercoolers above.
Available for:
BA 2332 - 200 and 300TDi ALL MODELS
BA 2334 - TD5 ALL MODELS (some vehicles require shortening of one of
the hoses)
EGR BLANKING KIT
BA 2322A
Removes the mechanical EGR system
from 300 TDi or TD5 - giving improved
performance and fuel economy.
MALLORY UNILITE
DISTRIBUTOR
Accurate timing that's maintenancefree.
These Mallory Unilite distributors
give you accurate, maintenance-free
ignition timing. Instead of oldfashioned points systems, they have
photo-optic LED triggering systems
that never vary or wear out. You get
increased rpm potential, improved
combustion, longer spark plug life,
and better cold-weather starting.
Hooking one up is a simple 3-wire
connection, and they come with your
choice of adjustable mechanical
and/or vacuum advance, selflubricating bushings, and a SuperDuty cap and rotor.
BA 5050 – Mallory Unilite
Distributor
BA 2336
BA 2332A
EGR Blanking kit for
300TDi
BA 2336
EGR Blanking kit for
TD5
V8 DISTRIBUTOR
WATERPROOFING KIT
Everything you need to protect the
distributor from damp conditions.
Includes boots for coil and
distributor.
BA 2840 – V8 Distributor
waterproofing Kit.
70
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
STAINLESS STEEL
INTERMEDIATE PIPE
Centre exhaust pipe (silencer
removed) in stainless steel.
Discovery
200 TDi
300 TDi
TD5
V8 98 on
BA
BA
BA
BA
2264*
2263*
2261
2262
Designed to increase engine power
BA 2186 - Camshaft to suit V8
3.5/3.9 (+18 - 22BHP)
BA 2187 Camshaft to suit 4.0/4.6
PERFORMANCE
CRANKSHAFT DRIVE
TRAIN KIT
Consists of forged cam gear, crank
gear and heavy duty timing chain.
(Does not include Camshaft).
BA 2179 – To suit 3.5/3.9 V8
performance
* Used in conjunction with 2 piece after market systems
CAMSHAFTS
PERFORMANCE FLY
WHEELS
Performance flywheel. These lightweight
performance flywheels come balanced
and ready to fit to your tuned V8
engine. Uses 91/2" clutch
BA 2031 – Flywheel to suit V8 engines
CLUTCH RELEASE
BEARING
Heavy duty metal clutch release
bearing. The metal sleeved clutch
release bearing uses the older
specification clutch bearing and a
metal sleeve to proved increased
durability.
BR 2295M – Metal clutch release
bearing.
CARBURETTOR AND INDUCTION MANIFOLD
CONVERSION FOR ROVER 3.5 V8
HEAVY DUTY COOLING
4 ROW RADIATOR
KIT PART NUMBER – BR 2236
BR 2236R – Needle Valve Conversion Kit - Off Road Use
BR 2336F – Replacement Air Filter
A very efficient 4 row radiator that increases cooling by at least 30% over
the standard ESR80 unit. Suitable for Classic RR and Disco 1 V8’s. Can also
be used on Defender vehicles but some modification to the frame is required.
BEARMACH is pleased to announce a new complete carburettor and
induction manifold kit from WEBER. It is suitable for Rover V8 vehicles
equipped with S.U. or Stromberg carburettors from 1970-1987.
The kit features a Weber 4 barrel downdraught carburettor and dual plane
induction manifold. The conversion has been developed for improved engine
torque and fuel economy.
Although calibrated for Range Rover 3.5 models, it is also suitable for many
other Rover V8 applications, and for those wishing to carry out engine tuning
modifications. For applications other than Range Rover 3.5 models,
calibration changes/adjustments may be necessary.
This conversion can be carried out by a competent D.l.Y. mechanic (with
basic tool kit), and comes complete with detailed fitting instructions, covering
various models.
The kit comprises of: Carburettor; Manifold; Air filter; Throttle linkage*;
Fuel line connections/Fuel filter; Engine breather/pulse air system; Hose
connections; All necessary gaskets, seals and fixtures.
BR 3131H – 4 row Radiator
*Automatic transmission vehicles will require supplementary kick down
linkage kit - PART NUMBER BR 2236/A
to order – contact official stockists
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
www.bearmach.com
71
performance / brakes
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SPECIAL PERFORMANCE EQUIPMENT
– BRAKES
SLOTTED and DRILLED BRAKE DISCS
The ultimate in Braking Performance
These Ultra Heavy Duty rotors offer additional durability and improved
stopping power. Designed with Police, Ambulance and Military in mind these
Brake Discs are directionally slotted (left/right).
KEVLAR / CARBON FIBRE BRAKE PADS
Bearmach are now able to offer Kevlar/Carbon fibre composite brake pads.
These have been tested on our vehicles for a year and we have noticed:
NO squealing LESS Wear on Brake discs 30% Improvement in braking performance All pads are supplied in sets all fitted with anti-squeal pads and sensor wires
(which may be removed if not required)
Currently available to fit the following:
Part No
OE No
Vehicle
BA 2194
STC9190K
Range Rover & Disco – Front
BA 2195
STC1879K
New Range Rover and Disco2 – Rear
BA 2196
STC1880K
Disco2 – Front
BA 2198
STC9189K
Range Rover & Disco – Rear
BA 2198
STC1276K
Range Rover & Disco – Rear
BA 2199
STC9187K
Discovery – Front
INCREASES Pad Bite REDUCES Fade DELIVERS exceptional braking performance. All sold as matching pairs. Currently available to fit the following:
Part No
OE No
BA 2203
BA 2204
BA 2205
BA 2207
BA 2208
* Please specify
FRC7329S
DEF – DIS – RR
FTC902S
DIS – RR
FTC1381S
DEF – DIS – RR
NTC8781S
Disco 2 Rear
ANR4582S
Disco 2 Front
spline type when ordering.
Vehicle
WHEEL ADAPTER SET
To convert the stud pattern of the wheels
fitted to your vehicle to allow fitment of
different wheels.
BA 3413
Wheel Adapter set (4) converts the Disco 1,
RR Classic or Defender wheel stud pattern
to that of a P38 RR or Discovery 2. (Not
suitable for RR/Disco pre 92). Some vehicles
may require extended plastic arches.
BA 3413
BA 3414
Wheel Adapter set (4) converts Disco2
and P38 RR to stud pattern of L322 RR
allowing fitment of new style wheels.
BA 3415
Wheel Adapter set (4) converts Disco,
RR Classic and Defender to L322
BRAIDED BRAKE HOSE
BA 3414
Braided Stainless Steel Brake Hoses are available to replace the standard
rubber flexible hoses and offer a more durable alternative. TUV approved.
Part No
Vehicle
BA
BA
BA
BA
BA
Discovery
Discovery
Discovery
Discovery
Discovery
163*
213
214*
214A
218
Hose Qty
89
92
94
94
2
– 92 to KA
– 94 KA – LA
MY on (ABS)
MY on (non ABS)
5
5
4
3
6
Please specify exact model when ordering.
*Available from stock 50mm extra length. (Add ‘L’ to ref. no. when ordering)
Others sizes are available at special order.
72
WHEEL SPACERS
Kit of 4 Spacers in alloy with all studs
and nuts
BA 3408
BA 3410
www.bearmach.com
30mm Discovery 2
30mm Discovery
BA 3410
to order – contact official stockists
DISCOVERY
CROWN WHEEL
DETROIT DIFF LOCKER
The Detroit Locker is a fully
automatic locking traction differential
that is well known for premium
performance and dependable
operation. Preload devices between
the side gears deliver 100% torque
and power to both drive wheels yet
unlock automatically to permit
necessary wheel speed differentiation.
The Detroit Locker is trouble-free as
it does not require service adjustments
or special lubricants. Easy to install,
no special tools or case modifications required. One year Limited Warranty.
BA 207
To suit Rover Differential. 10 spline, Locker (inc Carrier)*
BA 207A To suit Rover Differential. 24 spline, Locker (inc Carrier)*
* Please specify spline type when ordering.
4.1:1 Crown Wheel and
Pinion, suitable for offroad use where high ratio
(low speed)
manouevrability is
required. Replaces
standard set version on
fine spine axles. May need
spacer ring for other
applications.
BA 5700 – Crown Wheel
DETROIT TRUE TRAC
This unit features a gear-type limited
slip design (no clutch or friction plates
to wear out). Its positive gear action
automatically splits the torque with
none of the steering problems
associated with other traction ‘diffs’.
Power transfer is so smooth that it is
unnoticeable through the steering
wheel when fitted in front drive
steering axles.It performs as a
standard differential on normal
highway driving – then automatically engages when needed in wet, muddy or
icy conditions.
Truetrac Diff Locker
BA 209
to suit Rover Differential (10 spline – Rear)
BA 209F to suit Rover Differential (10 spline – Front)
BA 209A to suit Rover Differential (24 spline – Rear)
BA 209AF to suit Rover Differential (10 spline – Front)
A manually lockable differential which is
operated at the driver’s discretion by the
push of a button. Locking and unlocking of
the ‘diff’ is extremely rapid and can be
achieved at any vehicle speed.
Installation involves bolt in replacement of the
original equipment differential centre, an
air compressor and in-vehicle
switch. Can be fitted to both front
and rear axles without
compromising on-road performance.
BA 205A
To suit Rover
Differential. 10 spline*
To suit Rover Differential. 24 spline*
Heavy duty
BA 5752
BA 5753
BA 5756
BA 5757
BA 5758
BA 5759
half shafts
Disco 1
Disco 1
Disco 2
Disco 2
Disco 2
Disco 2
Front
Front
Front
Front
Rear
Rear
LH
RH
LH
RH
LH
RH
23/24 Spline
23/24 Spline
with CV Joint
with CV Joint
HEAVY DUTY DRIVING MEMBERS
Heavy duty driving members with screw on dust cap. Direct replacement for
original member with superior material specification, and longer splines.
HEAVY DUTY ADJUSTABLE
BALL JOINTS
* Please specify spline type when ordering.
Adjustable rear differential
ball joint. Just take up the
slack as it wears.
Supplied without gaiter.
Suitable for Defender,
Discovery and Range
Rover Classic.
NOTE: All A.R.B. Diff Lockers require compressor which is available
separately, order ref: – BA 215
DIFF LOCK SPACER RING
Required to allow fitment of above Diff Locks on vehicles with a 4:7:1 ratio
diffs. Includes extended bolts. To suit relevant vehicles.
BA 205S
Increased strength shafts for longer durability. Discovery 1 models require
fitment of Defender CV joints and driving members. Discovery 2 models are a
direct replacement for original shafts.
FTC859A
Heavy Duty Driving Member
to suit Defender,
Disco and RR Classic
A.R.B. AIR LOCKER DIFFS
BA 205
HEAVY DUTY HALF SHAFTS
TRE 76RS – Heavy Duty Ball
Joints (Adjustable)
TRE 76RS
Spacer Ring
to order – contact official stockists
www.bearmach.com
73
axle & steering
SPECIAL PERFORMANCE EQUIPMENT
– AXLE & STEERING
L AND ROVER
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
QUICK RATIO
STEERING
BOXES
BA 223 - 226
SPECIAL EQUIPMENT – ELECTRICAL
2.9 turns lock to lock.
These Steering Boxes
offer a quicker and
sharper response when
needing to turn to full
lock.
BA 225 – RHD (Disco 1)
BA 223 – RHD (Disco 2)
BA 226 – LHD (Disco 1)
BA 224 – LHD (Disco 2)
ELECTRIC FAN KITS
axle & steering
The electric fan kit replaces the belt driven unit. Simply remove fan from
water pump hub, then fix electric fan through radiator with special fixings.
BA 031
BA 031A
BA 031T
Secondary Electric fan Kits. Suitable for all Land Rovers
Primary Double Electric fan Kit. For extra cooling
Thermostat to suit above
HEAVY DUTY
STEERING PARTS
These Steel Track Rods are rally
proven. Ideal for the off-road
enthusiast and come complete with BM greaser ball joints.
Features: No steering damper required. The heavy steel takes stress off the
ball joints. Rods and joints last longer.
BA 220 – To suit Range Rover, Disco and Defender
BA 222 – To suit Discoveries from ’93
BA 2240 – To suit all Discovery 2s
EXPANSION
TANK
This cooling system
Expansion Tank is
manufactured in
aluminium for strength
and durability - it
directly replaces the
original ESR63 plastic
tank.
IGNITION LEAD SETS FOR V8 ENGINES
BRA 2001 – To suit early 4.0L and 4.6L
BRA 2002 – To suit late 4.0L and 4.6L
LUMENITION
KITS
BA 2324 – Expansion
Tank
POWER STEERING
RESERVOIR
Manufactured in aluminium for
strength and durability - this power
steering reservoir is a direct
replacement for the original.
BA 2323 – Power Steering
Reservoir
Do away with the points and replace with breakerless ignition system for
increased efficiency and accurate tuning.
BA 137
V8 fitting kit
To fit the above kit you will also need:
BA 140
Ignition module
74
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
I NTERIOR A CCESSORIES
It’s all very well having the best vehicle for
some off-road adventures but here’s a few
creature comforts to enhance your Discovery’s
interior.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CRUISE CONTROL KIT
The ideal enhancement to help you drive in a more relaxed and comfortable
manner on those longer motorway journeys. It will help reduce fuel
consumption and avoid accidental speeding.
The kit is suitable for all TD5 models with electronic throttles. It operates by
intercepting throttle pedal signals and will disengage when you touch the
brake or clutch. Includes fitting instructions and column mounted switches
for operation - uses OEM parts and fits into existing connections.*
BA 2055
Cruise Control Kit to suit Discovery TD5
* Note: Photograph shows a universal kit - the TD5 kit uses OEM switches
and connections not illustrated here
See P
a
for D ge 137
Perfo astec
rma
Chip nce
s
DOG GUARD
Construction: – Made from 2" wire mesh welded to frame for a rattle free
construction. Black nylon coating.
Features:
Easy to install and remove
Rear seat can be folded down without removing Dog Guard.
Will fit both 2 and 4 door models.
BA 2055 – Fits models up to 1999
BA 2057 – Fits all Discovery models from 1999 to 2005
GENUINE MESH DOG GUARD
STC50323 – Genuine original equipment Mesh Dog Guard to fit Discovery 2
GUN RACK
TD5 RELOCATION LOOM
BA 087 – To fit dog guards
for Range Rover and
Discovery
This extra length loom allows you to reposition the ECU to a more convenient
position - out of the way of water incursion etc. (approx. 2m). Used only in
conjunction with Dastec performance chip - see page 137
Formed and welded steel.
Black nylon coated.
BA 2336 – TD5 Relocation Loom
Features:
Easy clip on installation
BA 087
to Dog Guard.
Supplied as pairs these
clips allow 3 guns or umbrellas to be carried one above the other
TRAKKERS
DISCOBOX
BA 2422
This is a superb
addition to the earlier
Discoveries that were
supplied without a
built- in cubby box.
Fitted in seconds it
slips neatly into the
centre between the
seats and provides a
stylish, useful storage
area, and comfortable
armrest.
BA 2422 – Discobox
to order – contact official stockists
www.bearmach.com
75
electrical / interior
BA 5541
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 3141
BA 148
INTERIOR WOOD TRIM KIT
interior accessories
MOULDED BOOT LINERS
As effective as usual boot liners but with a difference – these can be rolled up
when not in use and stored in the vehicle. They spring back into shape when
unrolled and they have 4" sides to keep the muck in.
Enhance your vehicle’s interior with these beautiful wood trim kits
BA 3143
BA 3144
Available to order and to match existing wood trim.
Moulded Boot Liner for Discovery 1
Moulded Boot Liner for Discovery 2 (designed for 7 seater but
will fit standard model)
BA 148 – Wood Trim Kit to fit Discovery and Discovery 2.
RACE RALLY
HARNESS
Ideal for off road use,
these three point
harnesses securely hold
the driver and
passengers in place.
Mounts on lower seat
belt fixings but top
mount will need to be
repositioned.
BA 2154 – Race Rally
Harness
WATERPROOF
SEAT COVERS
HEAVY DUTY RUBBER MATS
These quality rubber mats are strong and waterproof. Their weight ensures
that they do not move about in the vehicle and keep original carpets clean.
BA
BA
BA
BA
3502
3503
3504
3505
–
–
–
–
Pair
Pair
Pair
Pair
Rubber
Rubber
Rubber
Rubber
Mats
Mats
Mats
Mats
for
for
for
for
Discovery (Front)
Discovery (Rear - 2nd row)
Discovery2 (Front)
Discovery2 (Rear - 2nd row)
STC8171
Pair of Waterproof Seat
Covers available in Grey.
Tailored fitting, quickly
and easily fitted and
removed. Ideal for
farmers, builders,
surveyors and all outdoor
activities.
STC8171 To fit
Discovery – front only (not
Disco2)
STC8170 To fit
Discovery – front and rear
- split seat only - (not
Disco2)
SEAT HEATER
Seat Heater available built-in to
new seats or DIY kit to fit inside
your seats. With full fitting
instructions wiring loom and
switches. Sold for pairs of seats
only.
MATS
Hard-wearing Mat sets specifically shaped to suit all Discoveries. All mats
have in-built heel pads on both sides for longer life. Please specify colour
when ordering.
For Discovery –
BA
BA
BA
BA
BA
BA
065
065A
080
067
067A
069
76
(3/5 door models)
3 Piece mat set in Blue
3 Piece mat set in Grey
3 Piece mat set in Beige
Rear cargo area mat in Blue
Rear cargo area mat in Grey
Rear cargo area mat in Beige
BA 2410 – Heater (pair)
BA 2410
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
STEERING WHEELS
We have a range of
quality, stylish steering
wheels from MOMO,
RAID, SPARCO and
MOUNTNEY for all
Defender applications –
together with bosses to
suit. More styles are being
added every day.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Photo illustrates similar
wheel fitted to a Defender
3 SPOKE WHEEL
Add a touch of class with this range of gear knobs. Either cast in Aluminium
with black printed graphics or in wood effect finish which look great with our
interior trim kits.
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
3812W
3833
3807
3807W
3803
3806
3803W
3802
3806W
3810W
Auto Knob Shell
Door Pull Set
Trans Box - No Diff Lock
Trans Box - No Diff Lock
R380
Trans Box - No Diff Lock
R380
LT77
Trans Box - Diff Lock
Handbrake Grip
Wood
Wood
Ali
Wood
Ali
Ali
Wood
Ali
Wood
Wood
Disco 2
Disco 2
Disco
Disco
Disco
Disco
Disco
Disco
Disco
Disco/Disco 2
Dashboard
Curl?
Steering Wheel Boss to suit Discoveries 89-94
BA 156
Steering Wheel Boss to fit BA 150
and BA 151
MOUNTNEY
A plastic moulded steering wheel - especially designed for comfort with an
ergonomic grip area.
BA 3202 Black moulded steering
wheel - 340mm
A classic wood wheel with high
gloss finish and 3 chrome spokes
BA 3203 Wood Rim Steering
Wheel - 350mm
Before
After
MOMO
These are quality genuine leather
sports steering wheels ideal for
the rigours of off-roading.
BA 3207 Black Leather Wheel
- 350mm
BA 3208 Black Alcantara
Wheel - 350mm
BA 1500
DASHBOARD REPAIR KIT
Does your Discovery suffer from the dreaded “Dashboard Curl” – a common
problem with earlier Discos – then this is the simple answer. A neat plastic
trim, supplied as a 2 part kit with self tapping screws, to give the dashboard
edge a better-than-original finish.
BA 1500 – Dashboard repair kit in Beige
BA 1501 – Dashboard repair kit in Grey
to order – contact official stockists
Steering wheel bosses to fit the above Mountney and Momo steering wheels
BA 3202 – BA 3208 are available, please specify which model the boss is
required for:
BA 3206 Boss to suit steering wheels BA 3202 - BA 3208
89 -94 only
www.bearmach.com
77
interior accessories
GEAR KNOBS
Three spoke design chrome or black spokes
available
BA 150
14" Vinyl wheel.
BA 151
15" Leather wheel
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
EBN500041
DISCOVERY 3 – Original Equipment
VUB501200
discovery 3
VUB502590
The following range of accessories is supplied as original
equipment for the latest Discovery from Land Rover – so you
can be assured of their quality and design.
VUB501380
YWJ500201
VUB501430
VUB502390
DGJ500010PMA
VUB501200
VUB501210
VUB501380
VUB502590
EBN500041
VTK500010
VTD500010
VTD500020
EAH500050PMA
EAH500052PMA
EAH500070PMA
EAH500100PMA
VCF500060PVJ
VCF500151PVJ
VCF500070PVJ
VCF500150PVJ
VTD500020
Towing Electrics
Tow Bar
Air Deflectors (Set of 4)
Door Protection Strips
Lamp Guards Front (Set of 2)
‘A’ Bar (no winch)
Rear Lamp Guards (plastic)
Rear Lamp Guards (aluminium)
Sills Scuff Protection in Stainless Steel
Side Steps
Side Tubes – Black
Side Tubes – Same design as VTD500010 above
but in Stainless Steel
Rubber Mats – Front LHD
Rubber Mats – Front RHD
Rubber Mats Rear Luggage Compartment
Rubber Mats Rear 3rd Row
Front Seat Covers
Rear Seat Covers – 3 individual
Rear Seat Covers 60/40 split
Rear Seat Covers 3rd Row
VTK500010
DGJ500010PMA
STAINLESS STEEL SIDE STEPS
A new style side step, designed for Disco 3 , P38
and L322 Range Rovers. They have a polished
stainless steel plate, with an aluminium under
construction. Rubber anti-slip strips ensure safer
exit and entry to the vehicle. TUV approved.
BA 4510 – Stainless Steel Side Steps
SIDE PROTECTION STRIPS
BA 4510
78
These rubber strips are easily fitted to your
vehicle to aid protection against minor dings and
scrapes. With a chrome insert they are also
pleasing on the eye.
BA 4400 – Discovery 3 Side Protection Strips
www.bearmach.com
to order – contact official stockists
L AND ROVER
DISCOVERY
CHROME ACCESSORIES for Disco3
Add that extra touch of luxury to your Discovery3. This range of metal
fitments are bright chrome plated and easily fit into position with the double
sided tape fixed to the reverse side.
INTAKE GRILLES for Disco3
SILL GUARD for Disco3
Moulded in hi-impact plastic and spray finished in
silver. Easily fitted, no drilling required.
Aluminium sills to replace plastic originals. Black
vinyl coated. No drilling required.
JAK000065MMM
BA 7804
Intake Grilles for Disco3
discovery 3
BA 4454 Metal chrome Grille for Disco3
BA 4458 Metal chrome Door Handle
VUB503880MMM Metal chrome Mirror Cover
Sill Guard for Disco3
SUMP GUARD for Disco3
Replaces plastic cover of towing eye and requires
some modification of front bumper. Avaialble in
natural aluminium or sprayed black
BA 7800 Sump Guard for Disco3 - Black
BA 7800S Sump Guard for Disco3 - Aluminium
UNDERBODY PROTECTION for Disco3
Front underbody protection in heavy gauge aluminium. These items are direct replacements for the
originals and offer much greater protection for vulnerable areas. Apertures are provided to allow easy
access for servicing without removing the guard.
The Gearbox guard has an extension which provides protection for the transfer box.
BA 7801
BA 7802
Front underbody protection for Disco3
Gearbox protection for Disco3
to order – contact official stockists
RADIATOR GUARD for Disco3
Sturdily moulded in heavy duty aluminium to
protect the most vulnerable areas of the radiator.
BA 7803
www.bearmach.com
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Radiator Guard for Disco3
79
accessories
L AND ROVER
DISCOVERY
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SNORKEL for Disco3
Fitting a raised air intake and
wading kit to your vehicle means
cleaner air in dusty conditions
and improved wading ability
in wet or flooded
conditions.
BA 2129
Safari Snorkel
for Disco3
DISCREET
WINCH MOUNT for
Disco3
Discreet winch mount for Discovery 3 totally hidden behind number plate. Suitable
for most low-line winches but solenoid box may
need to be re-positioned or radio control used. Bumper
modification required.
BA 7805
Winch Mount for Disco3
High Air Flow with
Excellent Filtration. Ideal
for extended use in dirty
and dusty off-road
conditions. 10 Year /
Million Mile Limited Warranty. Economical, a
K&N Air Filter Will Last the Life of Your Vehicle.
discovery 3
PHE000112K
BA 2317
K&N Filter for Discovery 3
K&N Cleaning Kit
Disco3 SPARE WHEEL CARRIER
The one accessory many think is missing from the
Disco 3. Sturdily built and designed to be
mounted directly to the chassis through the rear
bumper. Hinges aside to allow access to the rear
door and locks into position. Black powder
coating finish. Fit two if you want. Requires
cutting of rear bumper.
BA 7806
Disco3 Spare Wheel Carrier
PIPERCROSS PERFORMANCE AIR
FILTERS
PERSPEX WEATHER-SHIELDS
Made from perspex, easily fits to passenger and
driver’s doors to stop rain penetration when on
the move. Reduces draughts yet still allows good
ventilation.
TOWBAR ELECTRIC WIRING KIT
YWJ500201 – N+S-Type wiring kit which clips
into existing harness (Discovery 3)
80
VUB502390 Perspex weathershields for Disco3
(set of 4)
BA 4410
Perspex weathershields for front
Disco3 (pair)
BA 4411
Perspex weathershields for rear
Disco3 (pair)
www.bearmach.com
We at Bearmach are pleased to offer this range of
Pipercross Performance Air Filters made
exclusively to suit all Land Rovers.
Numerous Champion Race and Rally Teams have
proven that Pipercross Air filters offer:
Maximised Airflow
Extra Torque
Additional BHP Increased Acceleration
Washable and Re-Useable
Limited Lifetime Warranty
BA 5819
BA 5800
Pipercross filter for Disco3 - all
models
Pipercross filter universal cleaning
kit
to order – contact official stockists
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
F RONT E ND P ROTECTION
All of our black, nylon coated steel Nudge Bars, Bull
Bars and ‘A’ frames give an aggressive and purposeful
look and offer improved front end protection due to their
strength. Spot light mounting points are also included on
most. The units bolt to the existing holes on the
chassis/bumper although some cutting of the front spoiler
may be required.
nudge bars
BA 119
BA 009
INTEGRAL BUMPER & NUDGE BAR
TUBULAR “A” FRAME NUDGE BAR
Robust “A” Frame bar suitable for Series 3. Manufactured in 2" diameter 14
gauge steel. To fit to Series vehicles 8 holes need to be drilled. Also features
Spotlight mounting facility. Will also fit air conditioned vehicles.
NOTE: For vehicles fitted with side lift jacks use extension BA 2140
(optional)
BA 119
Tubular ‘A’ Frame Nudge Bar, Black Nylon Coated.
BA 119S
Tubular ‘A’ Frame Nudge Bar, Polished Stainless Steel.
Replaces the existing bumper & uses existing fixings.
Flame cut profiles with wraparounds mounted to a 14 gauge steel box
bumper with a lower protector bar. 11/2” (37mm) diameter tube. Box section
21/2” x 4" (63 x 100mm).
Shot blasted, etched and then black nylon coated for superior finish and
durability. This is the ultimate coating finish which endures all conditions.
Weight: – 26kgs.
Fits all models (including 90/110).
NOTE: For vehicles fitted with side lift jacks use extension BA 2140 (optional)
BA 009 – Integral Bumper and Nudge Bar
PROTECTION BAR
ALSO AVAILABLE
IN
STAINLESS
STEEL
Spotlight mounting
brackets to the rear
PROTECTION BAR
A simple tubular bar, made from heavy gauge steel
tubing. Spotlight mounting brackets to the rear. Fixes
easily to existing bumper.
Fits all Defenders without air-con.
BA 119S
20
BA 119B – Tubular steel Protection Bar - Black
BA 119BS – Tubular Protection Bar in stainless steel
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
FOLD DOWN
FLAT NUDGE
BAR
Similar to BA 005 but
is able to fold down to
load carrying position
with special hinged
bumper fixings.
Features: – Includes
integral lamp guards
NOTE: For vehicles
BA 006
fitted with side lift jacks
use extension BA 2140
(optional). Will also fit air conditioned vehicles – please confirm vehicle type
when ordering.
BA 002C2
nudge bars
BA 006 – Fold-down Flat Nudge Bar with integral lampguards
WRAPAROUND NUDGE BAR
Manufactured in 16 gauge steel. 2 x 90° bends each side.
11/2” (37mm) diameter tube. Top rail only in 11/4” (31mm).
Construction: – Tubular construction MIG welded onto rigid central frame.
Flame cut profiles with steel wraparound and centre folded plate for number
plate relocation or spotlight mounting. Black nylon coated.
Weight: – 20kgs.
Features: – Includes Top Rail and spotlight mounting facility.
Fitting: – To fit all models including 90/110 and air conditioned.
Optional: – Winch Mount Plate. See winch section for details.
NOTE: For vehicles fitted with side lift jacks use extension BA 2140
(optional)
BA 002C2 Wraparound Nudge Bar with integral lampguards
BA 002C Wraparound Nudge Bar without integral lampguards
BA 005/2
FLAT NUDGE BAR
Construction and fitting as described above for BA002C.
Weight: – 17kgs.
BA 005/2 – Flat Nudge Bar with integral lampguards
BA 005 – Flat Nudge Bar without integral lampguards
SOFT PLASTIC BARS
These bars offer robust vehicle protection as they are a steel frame
construction covered in a thick rubber coat to absorb impact. Easily fitted to
all Defender models.
VUB501720 – Soft ‘A’ Bar to fit without winch
VUB501740 – Soft ‘A’ Bar to fit with winch
VUB501760 – Full Bar to fit without winch
VUB501770 – Full Bar to fit with winch
to order – contact official stockists
www.bearmach.com
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
21
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
PERSPEX LAMP
GUARDS
L AMP G UARDS
Manufactured in impact
resistant flat acrylic
sheet. Fitting utilises 2
existing bezel fixing
screws and 2 extra screws
where bezel plastic must
be drilled. Supplied as
pairs, protects headlamps
from stone chips.
Lamp Guards are more than just a cosmetic
addition to your vehicle. They help protect your
valuable lights from debris thrown up by traffic in
front of you, from those inevitable knocks when
off-roading or even in the supermarket car park.
BA 053
BA 053 – Pair Perspex
Lampguards
lamp guards
FRONT LAMP
GUARDS
Slatted steel welded on
edge to square frame.
Finished in Black nylon.
Fixed by special bracket
fixing on to lamp bezel.
Will fit all models with
headlights in wings.
Sold as pairs.
BA 012
BA 012 – Pair Slatted
Steel Front Lamp
Guards
REAR LAMP
GUARDS
BA 012A
Slatted steel welded on
edge to square frame.
Finished in Black nylon.
Fixed by special bracket
fixing on to lamp bezel.
Sold as pairs. Matches
style of BA 012 above.
BA 012A – Pair Slatted
Steel Rear Lamp
Guards
BA 122
NOW AVAILABLE
IN
DEFENDER LAMP GUARD SET
STAINLESS
STEEL
A stylish set of lamp guards of sturdy construction and black nylon coated.
The front guards are hinged for easy access to the lights for cleaning while
the rear set are fixed. This set will protect the lights all around your vehicle
from flying debris and minor bumps without affecting the lighting output.
Only sold as a compete set of 4.
Only two holes to be drilled in plastic front trim panel.
Not suitable for use with Spare Wheel Carrier BA 132/132B
BA 122 – Defender Lampguard Set
BA 122S – Defender Lampguard Set in Stainless Steel.
Set of four Lamp
Guards for 90/110 and
late Series 3. Matching
style of BA012 above
BA 012B – Set of 4
Rear Lamp Guards
BA 122
BA 012B
Pair of Rear Lamp
Guards for 90/110 high
capacity pick-up (not
2002). matches style of
BA 012 above.
BA 012C – Pair Rear
Lamp Guards
BA 012C
22
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
S IDE S TEPS
All Bearmach side steps are designed not only to ease
entering and exiting the vehicle, but also help to protect
the vehicle from scuffs, dings and other annoying marks
picked up through everyday use. Easily fitted to the
chassis of the vehicle, with minimal modification
(underneath vehicle), the sturdy steps also contribute to
the vehicle’s appearance.
SIDE STEPS
BA 030A
BA 038S
All steel construction with a
ribbed rubber tread plate and a
rubber encased flat section, outer
frame. With strong chassis
mounted brackets. Easy to install
and are supplied as pairs
STAINLESS STEEL SIDE STEP
Stainless steel side step to suit Defender 90/110. Made from high quality
stainless steel tube and stainless steel tread plate with a raised anti-slip
surface. Polished to a mirror finish. All brackets and fasteners used
underneath the vehicle are zinc plated or stainless
BA 030A – Side Steps to suit
Land Rover 90
side steps
BA 033S – Side Step in Stainless Steel to suit Defender 90
BA 038S – Side Step in Stainless Steel to suit Defender 110
BA 038B – Side Steps to suit
Land Rover 110
BA 172
SIDE STEPS
Side step to suit
Defender. The outer tube
is black nylon coated
and the checker plate
tread plate is available
in its natural aluminium
finish or black anodised
finish.
BA 133 – Side Step in
natural Aluminium finish
for Defender 90
BA 133B – Side Step in
Black Anodised finish
for Defender 90
BA 133
REAR STEP
Made from heavy gauge steel and bar, then plated to give an extra durable
finish. No drilling required, bolts directly onto crossmember and can be used
in conjunction with all towing attachments. A very functional accessory.
(NOTE: the Drop Plate in the photograph is not included see page 34).
BA 172 – Rear Step
SIDE STEPS
13/4" steel tube
construction with
aluminium anti-slip tread
plate. With strong chassis
mounted brackets. Tubular
edge is Black nylon coated
Weight: – 7kgs
Also offers protection for
the sills. A very functional
accessory which is easily
mounted. Supplied as pair.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
FOLDING STEPS
A sturdily built step with
convenient spring loaded
action to help lower the
step when you need it
and raise it when it’s not
needed.
BA 030
STC7631 – Folding Side
Step to fit Defender
90/110
BA 030 – Side Steps to
suit Land Rover 90
BA 038 – Side Steps to
suit Land Rover 110
to order – contact official stockists
MTC3084 – Folding
Rear Step to fit
Defender 90/110
www.bearmach.com
23
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
E XTERIOR S TYLING
BA 090T
A broad range of accessories to improve the
appearance of your Defender while offering
practical protection and improvements.
BUMPERETTES
Steel folded section
construction with sturdy
brackets. Black nylon
coated.
Bolts directly in place of
the existing grab handles
and affords good
protection.
Weight: – 4.5kgs.
Fits all Land Rover Series
2, 2A, & 3, also 90/110.
TUBULAR BUMPERETTES
BA 090
BA 090 – Bumperettes
Heavy duty 1" tube construction complete with brackets. Available in 3
finishes. Bolts directly in place of the existing grab handles and affords good
protection.
Fits all Land Rover Series 2, 2A, & 3, also 90/110.
RRC 2971
HEAVY DUTY
BUMPERETTES
exterior styling
Suitable for Defender,
these bolt directly on to
the cross member
replacing the grab
handles. Will also fit
Series 2/3 vehicles but
requires drilling of cross
member. Made from
heavy gauge steel and
powder coated for
durability. Will fit with
Spare Wheel Carrier
BA 132
RRC2970 - RH
RRC2971 - LH
Heavy Duty Bumperettes
Must use jack extension
piece (BA 2140) when
jacking vehicle.
BA 090G
Will not fit with Spare
Wheel Carrier BA 132
BA 090T
Tubular bumperettes
Black Nylon coated
BA 090G
Tubular bumperettes
Galvanised finish
BA 090S
Tubular bumperettes
Stainless Steel finish
BA 090S
HEAVY DUTY BUMPERETTES
These heavy duty bumperettes are not only stylish but offer good protection to
the rear end and wing bottoms of your vehicle. Available black powder coated
or galvanised. These are very practical and give your Defender a very
individual look. Now with additional chequer-plate tread.
BA 290 Bumperettes black powder coated
BA 290G Bumperettes galvanised
24
WHEEL ARCH EXTENSIONS
These 50mm wide extensions are suitable for 3 and 5 door Defenders. They
are made from high impact plastic and are almost unbreakable.
BA 3720 - Defender Wheel arch extensions
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BUMPER / HEADLIGHT SURROUNDS / CLEAR
INDICATORS
A complementing range of accessories to upgrade your Defender to the latest
XS styling and more.
XS style headlight surrounds, with aperture for horn - moulded in a heavy
duty plastic finished in silver.
DHH100780LQV
Headlight surround - RH
DHH100790LQV
Headlight surround - LH
BR 0548C
XBD10067
XGB10028
XGB100310L
XS style Bumper to suit Defender – in brushed stainless
steel – can be drilled to accept later endcaps.
Heavy duty plastic grille with a chrome-look finish.
exterior styling
BR 3691S
Clear indicators
94MY on Defender
Side Repeater
Clear 94-98
Side Repeater
Clear 98 on
AIR INTAKE GRILLES
This new range of intake grilles for
Defenders is manufactured in highimpact plastic and finished to give a
durable and fashionable effect.
Hi-Force Heater Grilles (pair)
BA 5900 Satin Black
BA 5901 Gloss Black
BA 5902 Zambezi Silver
BA 5903 Brunei Silver
Sport Side Grille (right hand only)
The standard versions have black fins
and mesh, the premium versions have
silver fins and mesh.
BA 5920 Standard Black
BA 5921 Standard Brunei Silver
BA 5922 Premium Black
BA 5923 Premium Brunei Silver
BA 5924 Standard Zambezi Silver
BA 5925 Premium Zambezi Silver
to order – contact official stockists
www.bearmach.com
25
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
WINDOW MESH
GRILLES
These Window Grilles are
the ideal answer if you
need serious protection to
your vehicle’s back
windows for extreme offroading or security
reasons. Manufactured
from pressed steel these
grilles are easily screwed
into position or rivetted
for a more permanent
solution.
FACELIFT KITS
This 3 part Grille & Lamp Surround set
offers maximum airflow, strength and
stylish good looks. Easy to fit with no
drilling or specialist tools required.
Manufactured in tough injection moulded ABS to automotive standards. Fits
all models including air-con vehicles. (Land Rover badge is not included - if
required please order BTR1047)
BA 3550 Facelift Kit - Black with black mesh
BA 3551 Facelift Kit - Black with chrome mesh
BA 3552 Facelift Kit - Silver with black mesh
BA 3553 Facelift Kit - Silver with stainless steel mesh
BA 2880 – 5 Piece exterior Grille set in
Black (Defender) all rear
windows and rear side of station
wagon
BA 2881 – As BA 2880 but finished in
Stainless Steel
DOOR MIRRORS
BA 071
Plain mirror 7" x 5" (178
x 127mm)
HEATER AIR
VENT
BA 072
Plain mirror 10" x 7"
(254 x 178mm)
exterior styling
Moulded black ABS
plastic with wire mesh
grille. This product
increases the ram-air
effect to get better
power to the heater
blower whilst travelling
to improve heat and
demist facilities.
BA 5910
BR 1918
90/110 door mirrors and
arms
BR 1918
Heater Air
Vent (Pair)
BR 1914U
UNBREAKABLE
DOOR MIRRORS
STAINLESS STEEL GRILLE & LAMP SURROUND
Add that rugged stainless steel look to your Defender TD5. Manufactured in
a heavy gauge steel these are easily fitted using the same original fixing
points after removing the original plastic pieces.
These mirrors are awesome!!! We
drove a Defender 90 over the mirror
and it did not break!!! Not even the the
casing broke. Ideal for off road.
BA 3905
BA 3906
BA 3907
BR 1914U – Unbreakable mirror.
BR 1914UH – Heated Unbreakable
mirror.
26
Stainless Steel Grille to suit Defender 90/110 TD5
Steel Grille in Black to suit Defender 90/110 TD5
Stainless Steel Headlamp Surround to match Grille above
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 2088
BR 3248
PERSPEX WEATHER-SHIELDS
Made from perspex, easily fits to passenger and driver’s doors to stop rain
penetration when on the move. Reduces draughts yet still allows good
ventilation.
NOTE: The photograph shows a similar product fitted to a Freelander
BA 2088 Perspex weathershields for Defender 90/110 (pair)
BA 2088A Perspex weathershields for Defender 04 MY (front pair)
MUD FLAPS
Essential equipment to prevent damage from debris thrown up by the tyres
and to minimise water spray when driving on-road. Made from a flexible, hidensity rubber, these Kits consist of a pair of Mudflaps plus all brackets and
fittings.
Rear Mudflaps only (pair) Defender (does not include fittings)
Front Mudflaps only (pair) Defender
Front Mudflap kit for Defender
exterior styling
BR 3248
RTC4685
RTC9479
BA 0202
SIDE MOULDINGS
One kit suitable for 88/90 or 109/110 Land Rover. No drilling required.
Provides excellent protection for your door and vehicle side.
BA 0202 – Side Mouldings To suit 88/90
BA 0202A – Side Mouldings To suit 109/110
FIXED WINDOW
KITS
Fixed Window Kits.
(Pair) supplied with
glazing rubber
BA 132
BA 180
To suit Series 3
BA 182
To suit 109/110
BA 180
SLIDING
WINDOW KITS
SPARE WHEEL CARRIER
Bearmach spare wheel carriers are sturdily mounted to the chassis to ensure
minimum strain on rear door and hinges. Opens with rear door and can be
used with our bumperettes.
Sliding Window Kits
(pair). Flange Fit
BA 132
BA 181
To suit 90 – as OEM
BA 182A
To suit 110
to order – contact official stockists
BA 181
BA 132B
Spare Wheel Carrier to suit Defender up to 02MY. (Not for use
with soft top vehicles).
Spare Wheel Carrier as above but for use on soft top & Series
vehicles.
NOW AVAILABLE
BA 132C Spare Wheel Carrier as above but to suit Defender models 2002
onwards.
www.bearmach.com
27
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
O FF R OAD P ROTECTION
If you intend to take your Defender off-road you
ought to consider the vulnerable areas
underneath the vehicle as well as the bodywork.
A rock hitting the diff for example could leave
you stranded miles from nowhere and what will
you do if your fuel tank gets punctured.
Bearmach make a variety of items all
manufactured to the highest standards and tested
to destruction to give you peace of mind when
tackling the roughest terrain.
BA 121
off-road protection
UNDERBODY
VULNERABLE
AREAS
Sump
Drag Link
Front Diff
Sills
Rear Diff
Fuel Tank
BA 3133
DIFF GUARD
DIFF GUARD - Slider Type
Easy to fit, applicable to all models with standard axles, Zinc plated for
corrosion resistance NO DRILLING required.
A very heavy duty product made from 6mm steel to offer sturdy protection
for 110 Defenders 02MY on. Zinc plated to resist corosion. Bolts directly to
the diff mounting bolts to protect case as well as acting as a slider.
BA 121 – Diff Guard
BA 3133 – Diff Guard Slider Type - Rear
BA 125
BA 3662
DIFF GUARD and Slider
DIFF GUARD
A new style Diff Guard that offers improved protection. Easy to fit and Zinc
plated to resist corosion.
BA 125
28
Diff Guard for Defender
NOTE: Not suitable for 110 rear 02MY on
This easy to fit product will not
interfere with ground clearance of
vehicle. It is nearly impossible to lose
the guard due to its mounting method
and one Diff Guard fits front or rear diff housing. All bolts, nuts, washers and
instructions are supplied making it easy for the DIY fitter.
BA 3662 – Diff Guard and Slider
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
Panel protection.
Bearmach provide a range of Aluminium 5 Bar Checker plate to help protect
the panels and give extra strength to the vehicle. Available for the wing tops,
bonnet, sills and rear wings for both the 90 and 110 (sills & wing tops only
for S3), these plates also enhance the vehicle's appearance.
BA 113
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 083
SUMP GUARDS
Made from Heavy Duty 7 mm Aluminum plate and with 6mm fixing brackets
which are zinc coated for extra corrosion resistance. The Aluminum plate has
9 vent holes (38mm dia) to allow for ventilation, and to allow excess water to
drain.
Fits Defender 90/110
Fits Defender 90/110 fitted with integral
winch mounting BA 3093B
WING TOP
STRENGTHENERS
Made from sturdy 2mm
aluminium 5 Bar plate, not
only do these enhance the
appearance of your vehicle
but also allow you to step
on top of your wing to gain
access to the roof rack.
BA 113
BA 113B
BA 108
BA 108A
BA 113B
Wingtop strengthener with vent hole, for all Defender models,
As BA 113 but in Black finish
Wingtop strengthener. A shorter version coming up to the vent
on the Defender
As BA 108 but in Black finish
BA 3195
FUEL TANK GUARD
6mm thick, very high grade, aluminium fuel tank guard. With 2" round drain
and ventilation holes. Easy to fit, NO DRILLING required, picks up on fuel
tank mounting points.
BA 3195 – Fuel tank Guard to suit Defender 110 TD5 (Not with Tow Bar)
BA 3196 – Rear Fuel tank Guard to suit Defender 90 TD5 (Not with Tow Bar)
BA 3129
VENT COVERS
Vent covers in Stainless Steel to match the Wing Top Strengtheners above.
SALISBURY AXLE DIFF GUARD
Our new 5mm thick Diff Guard for the Salisbury axle is zinc and yellowed to
resist corrosion and comes complete with all necessary fixings and
instructions.
BA 3129 – Sailisbury Axle Diff Guard
to order – contact official stockists
BA
BA
BA
BA
BA
3900
3901
3902
3903
3904
Wing
Wing
Wing
Wing
Wing
Top Vent 90/110 in stainless steel
Top Vent 90/110 in black coated stainless steel
Side Vent 90/110 in stainless steel – R/H
Side Vent 90/110 in stainless steel – L/H
Side Vent 90/110 in black coated stainless steel – Universal
www.bearmach.com
29
off-road protection
BA 083
BA 083C
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 109G
BA 120
ROCK GUARDS
BONNET TOP STRENGTHENER
Made from sturdy 3mm aluminium 5 Bar plate, fits in to the recess of the
Defender bonnet and will allow persons to step on the bonnet, for access to
the roof rack.
BA 120
BA 120B
Similar to our sill protectors (BA 2059), but made from galvanised box
section, specially for the Off-Road enthusiast.
Replaces aluminium sill and bolts directly onto chassis and is more than able
to support the weight of the whole vehicle. The galvanised finish can be
painted to match the colour of your vehicle.
BA
BA
BA
BA
BA
BA
Bonnet Top Strengthener in Aluminium
As BA 120 but in Black finish
109
109G
110
110G
116
116G
To
To
To
To
To
To
suit
suit
suit
suit
suit
suit
Defender
Defender
Defender
Defender
Defender
Defender
90. Black Powder Coated.
90. Galvanised.
110. Black Powder Coated.
110. Galvanised finish.
130. Black Powder Coated
130. Galvanised finish.
off-road protection
BA 124
BA 124B
BA 2059
REAR WING PROTECTOR
Made from 5 Bar aluminium plate, these protect the lower part of the rear
wing from stone and gravel damage. The ideal finishing touch, and as fitted
to Limited Edition models.
BA
BA
BA
BA
124
124B
124C
124D
REAR
REAR
REAR
REAR
WING
WING
WING
WING
PROTECTOR to suit Defender 90
PROTECTOR to suit Defender 110
PROTECTOR, in black, to suit Defender 90
PROTECTOR, in black, to suit Defender 110
SIDE PROTECTION RAIL
Tubular side protection rail to fit 90 Land Rover. Pick-up on chassis points.
Minimum of drilling required, protects sills, simple to fit. Black nylon coated.
Weight: – 28kgs per pair.
BA 2059
Side Protection Rail
BA 126
SILL GUARD
TREE FENDERS
Made from 5 Bar aluminium plate, these protect the sill from scuffing while
entering or leaving the vehicle, as well as stone chips and light off-road
damage. The ideal finishing touch, and as fitted to Limited Edition models.
Easily fitted to the rear side panels of all Defender models these stylish bars
offer protection from those annoying scratches and dents from the
undergrowth when green-laning. Manufactured in a heavy gauge tubular steel
and black nylon coated (requires some drilling).
BA
BA
BA
BA
126
126C
127
127B
30
SILL
SILL
SILL
SILL
GUARD to suit Land Rover 90
GUARD, in black, to suit Land Rover 90
GUARD to suit Land Rover 110
GUARD, in black, to suit Land Rover 110
BA 3690
BA 3692
www.bearmach.com
Tree Fenders Def 90 and Def 110 CSW (Pair)
Tree Fenders Def 110 (Pair)
to order – contact official stockists
DEFENDER
L AND ROVER
RAISED AIR INTAKES
Fitting a raised air intake and wading kit to your vehicle means cleaner air in
dusty conditions and improved wading ability in wet or flooded conditions.
REF No
VEHICLE
BRAND
BA 2123
300/TD5 DEF
Plastic (BM)
BA 2123A
TD5 DEF RHD ABS
Safari
BA 2123NM
300/TD5 DEF
Mantec (Plastic)
BA 2123AM
300/TD5 DEF
Metal (BM)
BA 2123ARC
DEF with roll cage
Mantic
BA 2124
200 TDi DEF & Turbo Diesel
Plastic (BM)
BA 2124M
200 TDi DEF & Turbo Diesel
Mantec
BA 2124A
200 TDi DEF & Turbo Diesel
Metal (BM)
BA 2127A
V8 Def (no roll cage)
Plastic (Safari)
BA 2128
Normal Aspirated Diesel
Metal (BM)
BA 2900
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
* Some vehicles may need modification due to airbox specification
FRONT HOOP DEFENDER
An aesthetic bar to give your vehicle a CHALLENGE look. The bar bolts to
the vehicle. Suitable for mounting spotlights. Finished in Black. Note, this is
not a rollover bar - it is for show purposes only.
BA 2900 Front Hoop Defender
off-road protection
BA 2005
Bearmach can supply roll cages
for most Land Rover applications
RING FOR DETAILS
WADING KITS
ROLL CAGES
Standard rollbar (Body mounted) Bolted onto cappings. Manufactured in
tubular steel 2” (50mm) diameter with 3.2mm wall thickness. MIG welded
with heavy mounting plates. (Not A.R.C). Will also fit vehicle with standard
canvas hood.
BA 2005 – Standard Roll Cage
BA 2167 – To suit
200TDi.
Consists of
breather pipes
for axles,
gearbox and
timing cover
BA 2168 – To suit
300TDi.
Consists of breather pipes for axles, gearbox and timing cover
BA 2901
BA 2168A – To suit TD5
REAR BULKHEAD REMOVAL BAR
Enables the removal of the panel behind front seats on a Defender, giving
more legroom and easier access to the back of the vehicle
BA 2901 – Bulkhead Removal Bar
to order – contact official stockists
www.bearmach.com
31
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
ROOF RACKS
Family holiday, major expedition or just too much to put
inside the vehicle – a robust roof rack is an essential
accessory. Bearmach supply a number of roof racks for
the Land Rover range. For the Defender, the majority of
the roof racks are simply held into the gutter around the
roof with brackets. Available in black powder coating or
galvanised finish, with an optional ladder in most cases.
BA 007A
RTC8161/A
ONE PIECE ROOF RACKS
Manufactured in 3/4” box section steel. Jig welded and with a Galvanised
finish. Clamp on gutter fixing.
Weight: – 26kgs (88/90) or 30kgs (109/110).
BA 007A
BA 008A
BA 017
To suit Land Rover 88/90
To suit Land Rover 109/110
To suit Land Rover 130 / 110 Crew Cab
FLAT PACK ROOF RACK
Same appearance and construction as above but arrives flat pack for self
assembly.
BA 007
To suit Land Rover 88/90
BA 008
To suit Land Rover 109/110
ROOF RACK
Self assembly roof rack . Black powder coated. Easy for transportation,
disassembles in to a small parcel for storage. Does not include ladder.
RTC8161A – Self assembly Roof Rack for Def 90
RTC8141A – Self assembly Roof Rack for Def 110
OPTIONAL LADDER
A very popular addition to the roof racks above is the optional galvanised
ladder which is of similar construction to the roof racks and is easily fitted to
the back of the vehicle allowing easier access to lift loads to the roof rack. It
is fitted to the left of the rear door.
Suits BA 007/8/7A/8A
roof racks
BA 010 – Optional Ladder
BA 123
DEFENDER ROOF RACK AND FOLD-AWAY LADDER
This roof rack with fold away ladder is both stylish and functional. The rack
is of very sturdy construction and is black polyester coated. It is easily fitted
to the gutters using the fixings provided. The ladder folds down from the rear
for easy access and folds back up to remain unobtrusive when not in use. Will
fit all models, clears sun roofs and tropical roofs on Series vehicles.
BA 123
BA 123A
32
BA 010
Roof Rack with fold-away ladder
Roof Rack extension that allows above to be fitted to long
wheelbase models
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
TOWING EQUIPMENT
Towing is a vital function of a 4x4 vehicle yet can
present unique problems because of the higher ground
clearance. Bearmach offer a comprehensive range of
equipment specifically for Land Rover Defenders…
…for Towballs and other Towing Accessories please
see page 135
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CHALLENGE ROOF RACK
Heavy duty tubular roof rack finished in black nylon coating O.E. Quality
(will not fit with roll cages). The decking, lights and ladder shown in
photograph are extra.
BA 3190 – Roof rack to fit Defender 90
BA 3191 – Roof rack to fit Defender 110
BA 3189 – Roof Rack Ladder to suit above
CHALLENGE TOW STEP
Heavy duty rear step which also
acts as towbar. Tubular
construction with rubber tread on
step and 2 bolt holes to fit
standard towballs. Includes all
fixings except electrics.
DROP PLATES
See To
Balls a w
other T nd
Accessowing
on pag ories
e 135
Heavy duty construction and Zinc coated to keep them looking good.
Available as Fixed or Adjustable and will accept our 50mm Towball or
Universal coupling below.
BA 3185 – Rear Towstep for
Defender 90 and 110 up to 1998
BR 1233
BR 1233L
Land Rover 88/109 only
Land Rover 88/109 only
Standard Fixed
Long Fixed
towing equipment
BA 3186 – Rear Towstep for
Defender 90 from 1998
BA 3187 – Rear Towstep for
Defender 110 from 1998
BA 192
ROOF BARS
Supplied in pairs, these racks are
suitable for carrying unwieldy
items, such as ladders, and can
double up as ski or bike racks with
a simple attachment.
BA 3100
BA 043
to order – contact official stockists
Defender Roof Bars
Budget Roof Bars
ADJUSTABLE TOW HITCH
Sturdily constructed adjustable tow hitch. Can be adjusted to five different
heights. Finished in black (tow ball not included).
BA 192
Land Rover 90/110 up to 1998
BA 192A
Land Rover 90 from 1998 on
BA 192B
Land Rover 110 from 1998 on
* = E Marked
www.bearmach.com
Adjustable Tow Hitch*
Adjustable Tow Hitch*
Adjustable Tow Hitch*
33
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 183
TOW PLATE
A basic yet sturdily constructed non-adjustable tow plate. Finished in black.
BA 183 – To fit Land Rover 90/110 up to 98
DEFENDER TOWBARS
The loading conditions on towbars have increased and broadened significantly
in recent years. Not only the driving conditions have changed but also the
dynamic abilities of braking and accelerating have increased considerably.
All this puts much greater technical demand on the towbars; therefore the
Bosal range of Towbars supplied by Bearmach have specification
enhancements to ensure reliability and safety.
These are high quality, TUV approved tow bars and are supplied with all
necessary nuts and bolts, fitting instructions and safety guidelines. With
height adjustment facility to maintain a level towing load.
VUB105460 – Towbar Def 90, 1998 on*
BA 3107
VUB105470 – Towbar Def 110 1998 on*
FRONT REMOVABLE TOW HITCH
STC50257 – Defender 130 Towbar 1998 on
Quick fit tow hitch – fits in seconds.
Simply slip over the front bumper of your vehicle and tighten the two wing
nut bolts for instant towing capabilities.
* Includes Towball
towing equipment
BA 3107 – Removable Front Tow Hitch
BA 195
YWJ101500
ELECTRIC WIRING KIT
BA 195 – Universal wiring kit with audible warning
BA 195A – Universal Towing Bypass Relay
YWJ101500 – N-Type wiring kit which clips into
existing harness (Defender 98 on)
34
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
WINCHING EQUIPMENT
For the serious off-roader a winch can be an essential
part of the kit. Bearmach stocks a wide range of
winching accessories with winch plates to suit most
models and fitments.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
See our range of Winches and Accessories
in the 4x4 ESSENTIALS section.
BA 3093G
WINCH BUMPER
Winch frame and integral bumper. Replaces directly the existing bumper and
allows fitting of the following winches:
Warn 6000 “M” and “MX” series
Warn 8000 “M” and “MX” series
Warn XD9000
BA 2028
WINCH PLATE
Chassis mounted winch plate to suit Defender, will take 6,000 or 8,000lb
Warn winches. Mounts on top of bumper. Will not fit with air-con.
BA 2028 – Defender chassis mounted winch plate
BA 2030 – Defender chassis mounted winch plate to suit BA35/36
BA 2028A – Defender chassis mounted winch plate to suit T-Max winches
11,000 and 12,000
REAR WINCH
BUMPER
Rugged construction
with chequer plate steps.
Integral jacking points
and recovery eyes.
Utilises 16 existing
mounting points giving
tremendous strength and
BA 3125
heavy duty rear
protection. Suits Safari
rear door and tailgate types and will accept most low-profiles winches (with
10" x 5" stud pattern).
Cross member modification maybe necessary on some vehicles. This model is
not suitable for towing.
Superwinch X6 CD
Superwinch X9
T-Max
Available Black Powder coated or Galvanised finish . No drilling or any
modifications required. Incorporating jacking points. Made from 6mm steel
plate. Will also fit air conditioned vehicles – please confirm vehicle type when
ordering. Please specify if Black or galvanised required.
BA
BA
BA
BA
BA
3093B – Winch Bumper, Black Powder Coated
3093E – Winch Bumper, Black Powder Coated (non A/C vehicles)
3093G – Winch Bumper, Galvanised
3093F – Winch Bumper, Galvanised (non A/C vehicles)
3193 – Winch Bumper Black Powder Coated. To suit Self Recovery
Winches BA 035/036 (see page 106).
The following items can also be added to the Winch Bumper:
BA 3093C
GES
SEE PA 1
3
127 - 1
LL
UR FU
FOR O
OF
RANGE
BA 3125 – Rear Winch Bumper – Def 90 up to 98
BA 3126 – Rear Winch Bumper – Def 90 from 98 on
SUPERWINCH X6
WINCH KIT
‘A’ FRAME FOR WINCH BUMPER
BA 025 – 6,000 lb winch
to suit Defender. Including
bumper, roller fairlead and
cable.
2" Tubular Steel ‘A’ frame which bolts directly on to BA 3093B shown above.
BA 3093C – ‘A’ frame, Black Nylon Coating
BULL BAR FOR
WINCH BUMPER
SUPERWINCH X9
WINCH KIT
2" Tubular Steel Bull Bar
which bolts directly on to
BA 3093B shown above.
BA 3093A – 9,000 lb
winch to suit Defender.
Including bumper, roller
fairlead and cable
BA 3093D – Bull Bar,
Black Nylon Coating
SUPERWINCH HUSKY WINCH
BA 3095 – 8,000 lb winch for Defender. Includes bumper mount, fairlead
and all fittings.
to order – contact official stockists
ES
WINCH
BA 3093D
www.bearmach.com
35
winching equipment
Winch, fairlead and shackles shown in photograph are not included.
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
HEAVY DUTY SUSPENSION
Bearmach stocks a wide range of famous names
Shock Absorbers suitable for all Land Rovers as
well as other essential equipment for power offroading.
SHOCK ABSORBERS
suspension
MONROE – Gas Filled shock absorbers that offer an excellent
replacement for the Oil originals. Durable and suitable for
towing.
OME – Originating from Australia, these shock absorbers are
used for both on and off-road purposes with an off road
bias, and a heavy duty gas capacity.
KONI – Adjustable Gas filled shock absorbers to fine tune to
the desired specification. Suitable for use in both on and
off-road specifications.
BILSTEIN - A top-spec shock absorber offering a firmer ride
and superior on-road handling.
PROCOMP – A very reliable Gas-filled shock absorber for
multi purpose use, and with the capacity for extended
travel where required.
TUFFBACK – Introducing Bearmach’s own range of Tuffback
shock absorbers, designed in the Australian outback to
offer superior performance and durability. With increased
capacity to help with cooling on prolonged use and has the
option of extended length. These shock absorbers will offer
Excellent Value For money.
DeCARBON – A direct replacement for the oil filled originals
with gas, offering a firm ride with on and off-road
capability.
Extension
mm
Armstrong
Decarbon
OME
Koni
BR
BA
BA
BR
3604A
2248
3604O
2255K
Make
Fill
+ Tube type
O.E.
Oil
BR 0645
BR 1077
RSC100050
Armstrong
Oil
BR 0645A
BR 1077A
BR 0645A
STC2850A
Monroe
Gas
0
BR 0645M
BR 1077M
BR 0645M
STC2850M
Decarbon
Gas
0
BA 2241
BA 2242
BA 2241
BA 2246
Bilstein
Gas
0
BA 2122
BA 2119
BA 2122
BA 2119*
Procomp
Gas
0-25
BR 0645P
BR 1077P
BR 0645P
BR 1077P*
OME
Gas
0-25
BA 2120
BA 2121
BA 2120
BA 2121*
Koni
Gas
0-25
BR 0645K
BR 1077K
BR 0645K
STC2850K
OME H/Duty
Gas H/Duty
0-25
BA 2120H
BA 2121H
BA 2120H
BA 2121H*
Koni
Gas
50
BR 0645KL
BR 1077KL
BR 0645KL
BR 1077KL*
Front
Defender to 98
Rear
STEERING DAMPERS
Make
Defender
O.E.
BR 3604
Front
Defender from 98
Rear
RPM100080
Decarbon
Gas
50
BA 2249
BA 2250
BA 2249
BA 2250*
Procomp
Gas
50
BR 0645L
BR 1077L
BR 0645L
BR 1077L*
Koni Raid
Gas H/Duty
45
BR 0645KH
BR 1077KH
BR 0645KH
BR 1077KH*
Tuffback
Gas H/Duty
0-50
BA 2502
BA 2503
BA 2510
BA 2511
Procomp
Gas
100
BR 0645XL
BR 1077XL
BR 0645XL
BR 1077XL*
Tuffback
Gas H/Duty
50-100
BA 2514
BA 2515
BA 2524
BA 2525
BUSH KITS (for pin end only)
Monroe
Bush Kit to suit Monroe Shock Absorbers
Procomp
Bush Kit to suit Procomp Shock Absorbers
36
BA 0645MK
BA 0645PK
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
BA 3655
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 3670
SUSPENSION MODS
Ref No
Description
BA 3655
Cranked Rear Trailing Arm
Def/Disco/RR Classic 86 on
For use with suspension lifts. Includes rear polyurethane
bushes.
Vehicle
The following Radius Arms are for improved off-road use. Available in
standard, 3° or 6° camber correction – for use with lift kits. Bushes not
included
BA 3670 Front Radius Arm Std Wide
Def/Disco/RR Classic
BA 3671 Front Radius Arm 3° Wide
Def/Disco/RR Classic
BA 3672 Front Radius Arm 6° Wide
Def/Disco/RR Classic
HEAVY DUTY BLUE SPRINGS
Sold in pairs, these heavy duty springs are the ideal solution for those
customers seeking to improve their vehicle’s load carrying capacity.
PART NO
POSITION VEHICLE
HEIGHT RATE
INCREASE
WIRE
HEIGHT
BA
BA
BA
BA
BA
BA
BA
BA
BA
Rear
Rear
Front
Rear
Rear
Front
Rear
Front
Rear
40mm
40mm
45mm
40mm
20mm
30mm
0mm
0mm
0mm
22mm
21mm
17mm
I8mm
17mm
16mm
16mm
16mm
16mm
410mm
420mm
380mm
445mm
413mm
394mm
438mm
368mm
413mm
2100
2100B
2101
2102
2103
2104
2105
2106
2107
110/130
110
90/110
90/Disco/RR
90/RR/Dis/Dis2
RR/Dis/Dis2
Disco
RR/Disco
RR
510 Lbs
420 Lbs
255 Lbs
295 Lbs
240 Lbs
195 Lbs
194 Lbs
196 Lbs
195.5 Lbs
+2" SPRINGS for Off-Road Use
+2" springs to fit standard vehicle but intended for off-road use only (NOT
for towing or load carrying).
BA 2251 Front
Defender
50mm
BA 2252 Rear
Defender 90
50mm
BA 2253 Rear
Defender 110
50mm
BA 3676
REAR ROSE JOINT
SUSPENSION ARM
For maximum axle articulation these rose jointed trailing arms are the latest
products. Supplied with boots for maximum protection against mud and the
elements. Will fit existing axle and chassis without further modification.
BA 3676
Rear Rose Suspension arm
For lifted vehicles using standard
shock absorbers to gain extra axle
travel with minimum alterations.
BA 3656
to order – contact official stockists
Rear Shock
Dropper
suspension
REAR SHOCK DROPPER
DISLOCATION CONES
BA 3653
BA 3650
BA 3651
BA 3652
NTC6106
Rear pair of Dislocation Cones for 110
Front pair of Dislocation Cones
Rear pair of Dislocation Cones
Front Spring Retainer Plate (Each)
Rear Spring Retainer Plate (Each)
www.bearmach.com
37
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 2157
ANTI ROLL BARS
Why not combine the heavy duty springs with our range of special
suspension components below.
TWIN SHOCK
ABSORBER
BRACKETS
BA
BA
BA
BA
BA
BA 2156
032 Anti Roll Bars, Front, to suit R/R, Discovery and Defender
O34A Anti Roll Bars, Rear, to suit R/R, Discovery and Defender
032D Spare D Bush
Front Set 2 pieces
034D Spare D Bush
Rear Set 2 pieces
032L Spare Link Bush Set 8 pieces
Rear Anti Roll Bar
Rear Anti-Roll Bar replaces the original and yet is a more heavy duty
construction. Improves the handling of your Defender.
BA 2220 – Replacement Rear Anti-Roll Bar (Heavy Duty)
These new twin shock absorber brackets will suit all coil sprung models. The
front unit consists of top bracket, to take the original shock absorber plus an
additional one, and the bottom bracket to support the additional shock
absorber.
The rear unit consists of top shock absorber brackets which bolt through the
chassis and bottom brackets which weld onto the axle case.
BA 2156
BA 2157
BA 2158
BA 2220
Single front Tubular Galvanised Shock Tower (replaces conical
turret)
Twin Shock Mount Front
Twin Shock Mount Rear
When fitting to ABS vehicles a certain amount of modification will be
required to move the ABS pump and pipes.
AIR ADJUSTABLE SUSPENSION AID
Designed to fit inside your coil springs. Can be inflated to a maximum of
25psi to maintain the vehicle’s carrying capacity without spring sag. No need
for expensive spring mods. Kit contains PolyAir cells, inflation line, and cell
seats. Ideal for towing and eliminates body roll.
suspension
BA 2163 Air Suspension Aid to suit
Defender 90
BA 2164 Air Suspension Aid to suit
Defender 110
CASTER BUSH KITS
Caster bushes allow the axles to remain in their original positions when
raising the vehicle (i.e. prevents them twisting). They fit into the radius arms
to minimise any stress on steering components. Suitable for Defender, RR
Classic and Disco.
BSC 202PC – Caster Bush Kit pre 1994
BSC 206PC – Caster Bush Kit after 1994
38
www.bearmach.com
BA 2163A
Compressor Kit
Vehicle mounted to enable you to
inflate or deflate the air springs.
Complete with all pipes, low pressure
switch etc.
to order – contact official stockists
DEFENDER
SPECIAL PERFORMANCE EQUIPMENT
You’ve got the nudge bars, the wheels and tyres
and you think you’re ready for some serious offroading… BUT have you got the performance?
In this section Bearmach offer products to improve
all aspects of your Defender from the powerplant to
the the brakes and axle.
If you’ve any queries how you could best set up
your vehicle for some serious off-roading
or competition – call our
experts for some
experienced advice.
POLYURETHANE BUSH KITS
The fitment of Bearmach Polyurethane Bushes has been developed to give
more positive location at pivot or fulcrum points. These suspension
components are particularly recommended if you regularly tow or carry heavy
loads.
Make sure you
see our range
of Power
Enhancement
Accessories for
all Land Rover
engines on
page 137
These bushes have a high capacity to bear tension and compression and have
been tested at temperatures from -100°C to +100°C. They are resistant to
deterioration and swelling caused by oil, grease or chemicals.
BA 2071
BA 2071A
BA 2072
P-U BUSH KIT Defender from 1995
P-U BUSH KIT Defender from 2002 on
P-U BUSH KIT Land Rover 90/110 up to 1995
BR 0695P
BR 1083P
ANR1721P
BR 1754P
P-U
P-U
P-U
P-U
BUSH
BUSH
BUSH
BUSH
Shock Absorber
Shock Absorber
Bottom Bush Rear Defender 98 on
Top Bush Rear All models
BFM 236P P-U
BFM 237P P-U
BFM 237PE P-U
BR 0374P P-U
BR 0388P P-U
BUSH
BUSH
BUSH
BUSH
BUSH
Land Rover Equivalent:
Bump Stop ANR4188
Bump Stop ANR4189
Bump Stop suits front and rear (extended)
D Bush NTC7394
D Bush NTC6828
RBX101340P
P-U BUSH
Panhard Rod
Bush 2002MY on
HES
BUS E
ALL ILABL Y
A
V
TEL
A
ARA
SEP
to order – contact official stockists
PIPERCROSS PERFORMANCE AIR FILTERS
We at Bearmach are pleased to offer this range of Pipercross Performance
Air Filters made exclusively to suit all Land Rovers.
Numerous Champion Race and
filters offer:
Maximised Airflow
Increased Acceleration
Washable and Re-Useable
VEHICLE
All models
109
90/110
Various
Various
88/109
90/110
90/110
90/110
90/110
90/110
90/110
90/110
90/110
90/110
Rally Teams have proven that Pipercross Air
Additional BHP
Extra Torque
Limited Lifetime Warranty
Model
Cleaning Kit
3.5 V8 Carb
2.25 LD/Carb
3.5 V8 Carb
V8 Efi
2.3 P
2.3 P
2.5 P
2.3 D
2.5 D
2.3 D
2.5 D
2.5 TD
300 Tdi
TD5
www.bearmach.com
Year
up to 83
83 on
Off Road
Clamps to MAF
Weber Carb
Weber Carb
Weber Carb
01/84 - 09/90
09/85 - 07/90
03/83 - 04/84
03/84 - 09/95
09/86 - 07/90
09/94 - 12/05
98/05 -
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
Number
5800
5801
5802
5803
5805
5806
5807
5807
5810
5810
5810
5810
5810
5812
5818
39
accessories
L AND ROVER
performance
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DEFENDER
accessories
L AND ROVER
•
•
•
performance
•
•
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
High Air Flow with Excellent
Filtration
Designed to Increase
Horsepower and
Acceleration
Ideal for extended use
in dirty and dusty
off-road conditions
10 Year / Million
Mile Limited
Warranty
Economical, a
K&N Air Filter Will Last the Life of Your Vehicle
FULL SILICONE and
STAINLESS TURBO
HOSE KIT
Includes all necessary components to replace all existing hoses. Fits with
standard and uprated intercoolers (see opposite).
Available for:
BA 2310 - 200 TDI DEFENDER
BA 2313 - 300 TDI ALL MODELS
BEARMACH
VEHICLE
ENGINE
NRC9238K
ESR4238K
NTC6660K
NTC1435K
BA 2308
BA 2317
DEF
DEF/RR
DEF
DEF/RR
90/110
2.5D/2.5TD
TD5
2.5 TD
300 TDI
V8 (CD175 carb. Clamps on to Carb Adaptor)*
K&N Service Kit
* Two required per vehicle
REPLACEMENT SILICONE TURBO HOSES
(REPLACES ORIGINAL HOSE ONLY)
Fits standard and uprated intercoolers above.
Available for:
BA 2330 - 200 TDI DEFENDER
BA 2332 - 300 TDI ALL MODELS
BA 2334 - TD5 ALL MODELS (some vehicles require shortening of one of
the hoses)
EGR BLANKING KIT
Removes the mechanical EGR system
from 300 TDi or TD5 - giving improved
performance and fuel economy.
BA 2336
BA 2320
BA 2322A
BA 2332A
EGR Blanking kit for
300TDi
BA 2336
EGR Blanking kit for
TD5
FRONT MOUNTED INTERCOOLERS
Front mounted, large intercooler to suit defender 200 and 300 TDi - not
suitable for air-con vehicles.
Recommended for use with upgraded vehicles - Vehicle should be tuned to
gain maximum performance after intercooler is added.
BA 2320 – Front mounted intercooler
REPLACEMENT
INTERCOOLERS
These replacement intercoolers fit in
place of the existing original units.
They allow the air to be cooled by an
extra 50% for a denser charge and
result in up to 25% increase in
power. Available for:
BA 2300 – 200 TDi DEFENDER
BA 2303 - 300 TDi DEFENDER
BA 2306 - TD5 DEFENDER
HIGH OUTPUT HEATER MATRIX
This Aluminium High Output Heater Matrix For Defender, increases cabin
heat by 20% two types available to replace original part numbers
BA 2306
40
BA 2370 – Replaces – AAP 817
BA 2380 – Replaces – UTP1725
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
PERFORMANCE EXHAUST
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
EXPANSION TANK
performance
This cooling system Expansion Tank is
manufactured in aluminium for strength and
durability - it directly replaces the original
ESR63 plastic tank.
BA 2324 – Expansion Tank
PERFORMANCE EXHAUST
This stainless steel exhaust will improve overall performance of V8
engines and is supplied complete with extractor manifolds. Slightly more
expensive than a standard exhaust but well worth the initial expense.
BA 2192 To suit Defender 90 V8 - carb models only (includes branches)
BA 2192A To suit Defender 110 3.5 Sports System (includes Branches)
STAINLESS STEEL
INTERMEDIATE PIPE
Centre exhaust pipe (silencer
removed) in stainless steel.
POWER STEERING RESERVOIR
200 TDi
300 TDi
TD5
V8
90
BA
BA
BA
BA
2269
2267
2265
2265
110
BA 2290
BA 2268
BA 2266
N/A
Manufactured in aluminium for strength and
durability - this power steering reservoir is a
direct replacement for the original.
BA 2323 – Power Steering Reservoir
PERFORMANCE
FLY WHEEL
Performance flywheel.
These lightweight
performance flywheels
come balanced and
ready to fit to your
tuned V8 engine. Uses
91/2" clutch
BA 2031 – Flywheel
to suit V8 engines
CLUTCH RELEASE
BEARING
Heavy duty metal clutch release
bearing.
The metal sleeved clutch release
bearing uses the older specification
clutch bearing and a metal sleeve to
proved increased durability.
BR 2295M – Metal clutch release
bearing.
to order – contact official stockists
HEAD GASKETS
BR 3178C V8 composite head gasket. To suit 3.5
ETC7819C Composite head gasket 1.2mm thick. To suit 3.9 and 4.2
engines.
www.bearmach.com
41
DEFENDER
performance
accessories
L AND ROVER
CAMSHAFTS
Designed to increase engine
power
BA 2186
Camshaft to suit V8 3.5/3.9
(+18 - 22BHP)
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
PERFORMANCE CRANKSHAFT
DRIVE TRAIN KIT
Consists of forged cam gear, crank gear
and heavy duty timing chain. (Does not
include Camshaft).
BA 2179 – To suit 3.5/3.9 V8
MALLORY UNILITE
DISTRIBUTOR
Accurate timing that's maintenancefree.
These Mallory Unilite distributors
give you accurate, maintenance-free
ignition timing. Instead of oldfashioned points systems, they have
photo-optic LED triggering systems
that never vary or wear out. You get
increased rpm potential, improved
combustion, longer spark plug life,
and better cold-weather starting.
Hooking one up is a simple 3-wire
connection, and they
come with your choice
of adjustable
mechanical and/or
vacuum advance, selflubricating bushings, and a SuperDuty cap and rotor.
CARBURETTOR AND INDUCTION MANIFOLD
CONVERSION FOR ROVER 3.5 V8
KIT PART NUMBER – BR 2236
BR 2236R – Needle Valve Conversion Kit - Off Road Use
BR 2236F – Replacement Air Filter
BEARMACH is pleased to announce a new complete carburettor and
induction manifold kit from WEBER. It is suitable for Rover V8 vehicles
equipped with S.U. or Stromberg carburettors from 1970-1987.
The kit features a Weber 4 barrel downdraught carburettor and dual plane
induction manifold. The conversion has been developed for improved engine
torque and fuel economy.
Although calibrated for Range Rover 3.5 models, it is also suitable for many
other Rover V8 applications, and for those wishing to carry out engine tuning
modifications. For applications other than Range Rover 3.5 models,
calibration changes/adjustments may be necessary.
This conversion can be carried out by a competent D.l.Y. mechanic (with
basic tool kit), and comes complete with detailed fitting instructions, covering
various models.
The kit comprises of: Carburettor; Manifold; Air filter; Throttle linkage*;
Fuel line connections/Fuel filter; Engine breather/pulse air system; Hose
connections; All necessary gaskets, seals and fixtures.
*Automatic transmission vehicles will require supplementary kick down
linkage kit - PART NUMBER BR 2236/A
Twin Choke
Performance Carb
The kit is fitted with Webcon’s new
Sync Link kit allowing synchronous
opening of the Weber 32/36 DGV
throttle butterflies. This greatly
enhances low speed driveability and
torque, essential for off road
driving.
BA 5050 – Mallory Unilite
Distributor
This kit will fit all engines
fitted with a tubular
exhaust manifold. If the
original exhaust manifold
is still fitted, a simple 4 hole
blanking plate will need to be
fabricated to block the aperture left
when the OE intake manifold is
removed.
V8 DISTRIBUTOR
WATERPROOFING
KIT
Everything you need to
protect the distributor
from damp conditions.
Includes boots for coil and
distributor.
BA 2840 – V8 Distributor
waterproofing Kit.
•
•
•
•
•
A twin choke performance carburettor
kit for LandRover 2 1/4 ltr engines.
Synchronous opening of the Weber 32/36 DGV throttle butterflies.
Enhances low speed driveability and torque.
Fits all engines with a tubular exhaust manifold.
Enhances low speed driveability and torque
BR 2230 Twin Choke Performance Carburettor
42
www.bearmach.com
to order – contact official stockists
SPECIAL PERFORMANCE EQUIPMENT
– AXLE & STEERING
DEFENDER
L AND ROVER
CROWN WHEEL
The Detroit Locker is a fully
automatic locking traction differential
that is well known for premium
performance and dependable
operation. Preload devices between
the side gears deliver 100% torque
and power to both drive wheels yet
unlock automatically to permit
necessary wheel speed differentiation.
The Detroit Locker is trouble-free as
it does not require service adjustments
or special lubricants. Easy to install,
no special tools or case modifications required. One year Limited Warranty.
BA 5700 – Crown Wheel
axle & steering
DETROIT DIFF LOCKER
4.1:1 Crown Wheel and
Pinion, suitable for offroad use where high ratio
(low speed)
manouevrability is
required. Replaces
standard set version on
fine spine axles. May need
spacer ring for other
applications.
BA 207
To suit Rover Differential. 10 spline, Locker (inc Carrier)*
BA 207A To suit Rover Differential. 24 spline, Locker (inc Carrier)*
BA 208
To suit Salisbury Differential. No Spin, replaces Sun gears*
* Please specify spline type when ordering.
DETROIT TRUE TRAC
This unit features a gear-type limited
slip design (no clutch or friction plates
to wear out). Its positive gear action
automatically splits the torque with
none of the steering problems
associated with other traction ‘diffs’.
Power transfer is so smooth that it is
unnoticeable through the steering
wheel when fitted in front drive
steering axles.It performs as a
standard differential on normal
highway driving – then automatically engages when needed in wet, muddy or
icy conditions.
Truetrac Diff Locker
BA 209
to suit Rover Differential (10 spline – Rear)
BA 209F to suit Rover Differential (10 spline – Front)
BA 209A to suit Rover Differential (24 spline – Rear)
BA 209AF to suit Rover Differential (24 spline – Front)
HEAVY DUTY HALF SHAFTS
Defender front half shafts use a 24/23 spline shaft and can only be used with
the Original CV joint to 1989 model. For later models it is either necessary
to retro fit the earlier joint, and change the hub assembly, or to use a special
CV joint for the conversion.
Rear shafts require the use of Heavy duty driving members BR 0465A (Pre
1989) or FTC859A (After 1989).
Heavy duty
BA 5752
BA 5753
BA 5758
BA 5759
half shafts
Def 90/110 (upto 89)
Def 90/110 (upto 89)
Def 90
Def 90
Front
Front
Rear
Rear
LH
RH
LH
RH
23/24 Spline
23/24 Spline
A.R.B. AIR LOCKER DIFFS
A manually lockable differential which is
operated at the driver’s discretion by the
push of a button. Locking and unlocking of
the ‘diff’ is extremely rapid and can be
achieved at any vehicle speed.
Installation involves bolt in replacement of
the original equipment differential
centre, an air compressor and
in-vehicle switch. Can be fitted
to both front and rear axles
without compromising on-road
performance.
BA 205
To suit Rover
Differential. 10 spline*
BA 205A To suit Rover Differential. 24 spline*
BA 204
To suit Defender 110 Rear (Rover axle). 2002 on
BA 206
To suit Defender 110 Rear (Salisbury axle). up to 2002
* Please specify spline type when ordering.
NOTE: All A.R.B. Diff Lockers require compressor which is available
separately, order ref: – BA 215
HEAVY DUTY DRIVING MEMBERS
Heavy duty driving members with screw on dust cap. Direct replacement for
original member with superior material specification, and longer splines.
DIFF LOCK SPACER RING
Required to allow fitment of above Diff Locks on vehicles with a 4:7:1 ratio
diffs. Includes extended bolts. To suit relevant vehicles and Defender 110
02MY on (rear).
BA 205S Spacer Ring
to order – contact official stockists
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
FTC859A – Heavy Duty Driving Member to suit Defender, Disco and RR
Classic
BR 0465A – Heavy Duty Driving Member to suit Defender only
www.bearmach.com
43
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
OVERDRIVE
HEAVY DUTY ADJUSTABLE
BALL JOINTS
Adjustable rear
differential ball joint.
Just take up the slack
as it wears.
Supplied without
gaiter.
Suitable for Defender,
Discovery and Range
Rover Classic.
TRE 76RS – Heavy Duty Ball Joints
(Adjustable)
TRE 76RS
The Ultimate 2-Speed
Auxiliary Transmission
Quality, Reliability,
Performance, Lower
Fuel Consumption
A proud history, GKN
Laycock Overdrives were
first used on the Classic
high performance and
sports cars of the 1950’s. Proven reliability, used for refinement on Volvo’s
and for the hard working life of Ford Transits.
Continuing success on a wide range of demanding applications, Hot Rods,
competition cars, and now bringing flexibility to the Land Rover, the ultimate
4x4. Fits all 5 speed gearboxes
BR 5000 – Laycock Overdrive
axle & steering
FREE WHEELING
HUBS
Ideal economy measure
when four wheel drive is
not required, saves wear
and tear on front axle.
BR 1276 – Pair free
wheel hubs and
conversion for transfer
box to suit Defender 110
BA 225
WHEEL ADAPTER SET
QUICK RATIO STEERING BOXES
2.9 turns lock to lock. These Steering Boxes offer a quicker and sharper
response when needing to turn to full lock
BA 225 – RHD (Defender)
BA 226 – LHD (Defender)
To convert the stud pattern of the wheels fitted to your vehicle to allow
fitment of different wheels.
BA 3413
Wheel Adapter set (4) converts the Disco 1, RR Classic or Defender wheel
stud pattern to that of a P38 RR or Discovery 2. (Not suitable for RR/Disco
pre 92). Some vehicles may
require extended plastic
arches.
BA 3415
Wheel Adapter set (4)
converts Defender to L322
Note: for use on air sprung Classic
Range Rover extended bump stops
may be necessary when fitting
some wheels (eg 18" hurricane)
BA 3413
WHEEL SPACERS
HEAVY DUTY
STEERING PARTS
Kit of 4 Spacers in alloy with all studs
and nuts
These Steel Track Rods are rally proven. Ideal for the off-road enthusiast and
come complete with BM greaser ball joints.
Features: No steering damper required. The heavy steel takes stress off the
ball joints. Rods and joints last longer.
BA 3410
30mm Defender
BA 220 – To suit Range Rover, Disco and Defender
44
www.bearmach.com
to order – contact official stockists
SPECIAL PERFORMANCE EQUIPMENT
– BRAKES
DEFENDER
L AND ROVER
SPECIAL EQUIPMENT
– ELECTRICAL
KEVLAR / CARBON
FIBRE BRAKE
PADS
IMPROVED LIGHTING
North American specification
lights to suit Defender.
Bearmach are now able to
offer Kevlar/Carbon fibre
composite brake pads.
These have been tested on
our vehicles for a year and
we have noticed:
AMR 3507 – Clear, Round
Reverse or Side
Lamp,
AMR 6522 – Red, Round Rear
Fog Lamp
NO squealing
LESS Wear on Brake discs
30% Improvement in braking performance
All pads are supplied in sets all fitted with anti-squeal pads and sensor wires
(which may be removed if not required)
The above items are supplied with
mounting plinth and screws.
AMR 6526 – Round, Red
Stop/Tail light
ANR 6527 – Round Amber
Indicator light
AMR 6528 – Round, Clear
Reverse or Side
Lamp
– Front
– Rear
– Front
110 – Rear
The above items are supplied
without mounting plinth
(AMR3850) and screws
(SE105161L).
LINK LEADS
STC 1188 – 2 wire for indicator,
side, reverse and fog
lamp
STC 4637 – 3 wire for stop / tail
light
BRAIDED BRAKE HOSE
Braided Stainless Steel Brake Hoses are
available to replace the standard rubber
flexible hoses and offer a more durable
alternative. TUV approved.
Vehicle
Hose Qty
BA 158*
Land Rover 90
BA 159*
Defender 99-04MY – (90 & 110) Non ABS
BA 161*
Land Rover 110
BA 164*
Defender 99-04MY – ABS (90 & 110)
Please specify exact model when ordering.
*Available from stock 50mm extra length. (Add 'L' to ref. no. when
ordering). Others sizes are available at special order.
3
3
3
4
SLOTTED and DRILLED
BRAKE DISCS
The ultimate in Braking
Performance
These Ultra Heavy Duty rotors
offer additional durability and
improved stopping power.
Designed with Police, Ambulance
and Military in mind these Brake
Discs are directionally slotted
(left/right).
INCREASES Pad Bite REDUCES Fade DELIVERS exceptional braking performance. All sold as matching pairs. Currently available to fit the following:
Part No
OE No
Vehicle
BA 2203
BA 2203
BA 2204
BA 2205
Available soon:
SDB000330S
FRC7329S
FRC7329S
FRC7329S
FTC1381S
DEF
DEF
DEF
DEF
(Front solid)
110 ’94-2000 (Rear solid)
(Front vented)
(Rear solid)
HALO H4 UNITS
Bearmach stock a selection of lights for the Defender, Series 3 and classic
RR. Not E marked.
BA 070C – Crystal Clear H4 Unit
BA 070HI – Halo Ions Gold Effect H4 Unit
BA 070HC – Halo Crystal Clear H4 Unit
DEF 110 2000 on (Rear solid)
to order – contact official stockists
www.bearmach.com
See Sp
o
and L tlights
accessoighting
pages 1 ries on
41-142
45
brakes & electrical
Currently available to fit the following:
Part No
OE No
Vehicle
BA 2197
STC9150K
Defender
BA 2198
STC1276K
Defender
BA 2199
STC2956K
Defender
BA 2200
STC1601K
Defender
BA 2201
STC2950K
Defender
BA 2202
STC1275K
Defender
Part No
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
IMPROVED LIGHTING KITS
This lighting range not only improves the lighting power but also enhances
the look of the vehicle. All lights are also available separatley. Link leads are
provided as well as mounting plinths for full Landrover compatibility. Emarked Approved. Two versions are available :-
BR 1717H
Standard bulbed lights but with clear
coloured lenses, kits are
available for coloured versions
and for ‘white clear’ lens
versions.
LIGHTING KITS - with
Standard Bulbs
BA
BA
BA
BA
BA
BA
5170
5171
5172
5173
5174
5175
BA 5176
BA 5177
E-mark
approved
Clear
Red
Stop/Tail
Amber
Clear Kit Front
Clear Kit Rear
2 x indicator Clear, 2 x Side light front
2 x Clear indicator Rear 1 x reverse 1
x Fog (RED) 2 x Stop Tail
Clear Kit Front (LED Bulbs)
Clear kit Rear (LED Bulbs)
HEATED REAR WINDOW
Heated Rear Window (Triplex). Suitable for vehicles with rear station wagon
doors.
BR 1717H – Heated Rear Window
LED bulbed versions offer a dramatic increase in light, as well as having
the options of white versions that emit coloured light. Kits are available
for the front and rear of defenders in both coloured and white versions.
E-mark approved.
electrical
E-mark
approved
LIGHTING KITS - with LEDs
BA
BA
BA
BA
BA
BA
BA
5180
5181
5182
5183
5184
5185
5186
BA
BA
BA
BA
BA
5187
5188
5189
5190
5191
Clear Side (6W)
Clear Reverse (21W)
Red Fog (21W)
Stop Tail
Indicator
Front Kit
2 x indicator , 2 x Side light front
Rear Kit
2 x indicator Rear 1 x reverse 1 x Fog
2 x Stop Tail
Clear Red Fog (21W)
Clear Stop Tail
Clear Indicator
Front Kit
2 x indicator Clear, 2 x Side light front
Rear Kit
2 x Clear indicator Rear 1 x reverse 1
x Fog (RED) 2 x Stop Tail
CRUISE CONTROL KIT
The ideal enhancement to help you drive in a more relaxed and comfortable
manner on those longer motorway journeys. It will help reduce fuel
consumption and avoid accidental speeding.
The kit is suitable for all TD5 models with electronic throttles. It operates by
intercepting throttle pedal signals and will disengage when you touch the
brake or clutch. Includes fitting instructions, universal wiring loom and
column mounted switches for operation.
BA 5542
Cruise Control Kit to suit Defender TD5
ANGEL EYE SIDE LIGHTS
The ideal addition for those requiring front fog
lights, or can be used to upgrade the existing
lights. The halo can be used as a side light,
replacing the original. Some modification of the
positioning is required on Defenders.
BA 3037 – Angel Eye Side Lights
46
TD5 RELOCATION LOOM
This extra length loom allows you to reposition the ECU to a more convenient
position - out of the way of water incursion etc. (approx. 2m). Only for use
with BA 2177 and BA 21772 performance chips - see page 137.
BA 4202 – TD5 Relocation Loom
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
I NTERIOR A CCESSORIES
It’s all very well having the best vehicle for
some off-road adventures but here’s a few
creature comforts to enhance your Defender’s
interior.
BA 074
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
REAR SCREEN WIPER and WASH KITS
BA 074
BA 075
Rear Door Washer Kit. For station wagon door
Rear Screen Wiper Kit. For station wagon door
LUMENITION
KITS
Do away with the points
and replace with
breakerless ignition
system for increased
efficiency and accurate
tuning.
BA 137
BA 138
BA 139
V8 fitting kit
4 Cylinder Defender kit (Lucas distributor)
4 Cylinder Series 2/3 kit (Lucas distributor)
BA 076
DOG GUARD for 90/110
BA 076/2 – Dog Guard to fit Defender 90/110 (OEM)
Construction: – 50mm mesh welded to box section frame. Specially designed
feet to facilitate easy removal. Coating: – Black nylon
Features: – Easily removed by two thumb wheels when not in use. Minimum
of effort required for installation. Can be used as Gun rack support. Acts as a
cargo load divider.
interior accessories
To fit any of the above kits you will also need:
BA 140
Ignition module
DOG GUARD for Defender 110 Station Wagon
ELECTRIC FAN KITS
The electric fan kit replaces the belt driven unit. Simply remove fan from
water pump hub, then fix electric fan through radiator with special fixings.
BA 031
BA 031A
BA 031T
Secondary Electric fan Kits. Suitable for all Land Rovers
Primary Double Electric fan Kit. For extra cooling
Thermostat to suit above
BA 091 – Dog Guard to fit Defender 110 Station Wagon and 109 (OEM)
Construction: – 50mm mesh welded to box section frame.
Coating: – Black nylon
Features: – Specially designed for ease of installation, no drilling required.
Floor to roof fitting offers protection to back of seats.
GUN RACK
RADIATOR MUFFS
to order – contact official stockists
These high quality
Radiator Muffs feature a
two position adjustable
flap to allow control of
air flow to the radiator
to suit different weather
conditions.
Easy clip on installation to
Dog Guard.
Supplied as pairs these
clips allow 3 guns or
umbrellas to be carried
one above the other
BA 2004 – Radiator
Muff to suit Defender
BA 087 – Gun Rack to fit
dog guards BA076
AND BA091
www.bearmach.com
47
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
CENTRE
CUBBY BOX
BA 189A
Replacing the middle
seat, this cubby box
not only offers an
armrest, but also
extra storage space.
Features coin tray
and only available in
black.
BA 189
Cubby Box To fit Series 2a/3
BA 189A
Cubby Box to fit Defender (Not for use on vehicles without
barrier)
BA 2420
BA 2170
REAR WINDOW MESH GUARD
For added security this set of window guards is constructed from a sturdy
metal grid, black nylon coated. Covers rear door window and the two rear
quarter panels.
interior accessories
BA 2170 – Set of 3 pieces
SECURE CENTRE CUBBY BOX
Sturdy metal construction this lockable
cubby box keeps valuables secure and from
prying eyes. Replaces the middle seat, the
leatherette covered lid is a useful armrest.
Available in black or grey. Cup holder is
available as optional extra.
Size: L500 x W300 x H350mm
BA 2420 – Lockable Cubby Box – Black
BA 2421 – Lockable Cubby Box – Grey
BA 2420C – Optional Cup Holder
BA 3145
MOULDED BOOT LINERS
These 4” deep boot liners work effectively in maintaining that 'new look'
throughout the entire vehicle. Available for all vehicles in the Land Rover
range, they are strong, durable and can be rolled and unrolled for ease of
use.
NOTE: The photograph shows a similar product fitted to a Range Rover
BA 3145
48
www.bearmach.com
Moulded Boot Liner for Defender 90 Truck Cab (designed for
full load area including high sides).
to order – contact official stockists
DEFENDER
L AND ROVER
GEAR KNOBS
interior accessories
Add a touch of class with this range of gear
knobs cast in Aluminium with black printed
graphics. Ideal to match our range of
dashboard clock surrounds.
BA 3805 – Trans Box
BA 3801 – R380 Gearbox
BA 3800 – LT77 Gearbox and LT85
ALUMINIUM TRIM
A unique set of products designed to add a touch of style to the interior of
Defender 90/110/130 vehicles. They offer a stylish upgrade to existing trim,
quick and easy to fit. All items are manufactured in aluminium, hand finished
in a highly polished finish.
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
Aluminium Heater Vents (Pair)
Heater and Fan Control Handles (set of three)
Clock Surrounds (Set of 4) – 99 on with clock
Clock Surrounds (Set of 4) – 99 on with rev counter
Clock Surrounds (Set of 4) – up to 98
Centre Panel with cigarette lighter surround
Centre Panel with cigarette lighter, wiper and gauge
Centre Panel with cigarette lighter, wiper and headlight
3 gauges
Switch Panel
Aluminium Trim
These high quality Aluminium
trim parts enhance the interior
of any Defender and can be
used with other parts from our
range to complete the look.
REV COUNTERS
These rev counters are designed
for all models – petrol and
diesel, including the
TD5.
YAE100790
YAE100800
RRC5231
TD5 98 on.
V8 & Tdi 98 on.
V8 & Tdi (+ others)
upto 98.
to order – contact official stockists
Aluminium Trim
BA
BA
BA
BA
BA
3840
3841
2710
2711
2712
–
–
–
–
–
Gear knob (for R380 Gearbox only)
Trans box knob
Door Pull Surround
Window Winder Surround
Door Handle Surround
BA
BA
BA
BA
3842
3843
3844
3845
–
–
–
–
Door Locking Pegs
Door Closing Handles
Seat Reclining Handles
Air Vent Knobs 2002 on
www.bearmach.com
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
49
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SEATS
Bearmach have recently introduced a new range of
replacement seats, ranging from replacement cushions to
complete half leather seats. Most are available in a range of
trim types whether you require to up date the vehicle or keep
it in it's original form.
FABRIC TYPES FOR SEATS
All seats in the following section are available in the fabrics shown below.
B–Black Vinyl G–Grey Vinyl
T–Techno L–Black Logo M–Moorland
REPLACEMENT SEAT AVAILABILITY FOR DEFENDERS
AIR
CONDITIONING
KITS
Experience the convenience and comfort of air-conditioning in your Defender.
These kits are complete with full instructions and all necessary fittings.
Mounts as original with the exception of not having the extended front grille.
Will also work with most heavy duty intercoolers.
BA
BA
BA
BA
5001
5002
5003
5004
Defender
Defender
Defender
Defender
BA 2154
TDi 300 - RHD
TDi 300 - LHD
TD5 - RHD
TD5 - LHD
3 POINT SAFETY
HARNESS
trim & seating
Ideal for competition
use or for that added
safety. Mounts on lower
fixings, top mount will
need to be repositioned
in vehicle. Suits Series
1, 2, 3 and Defender
BA 2154 – 3 Point
Safety Harness
INERTIA REEL
SEAT BELTS
3 point cap and diagonal. Can be used
as replacement for 90/110 or as retro kit
for earlier models. Early vehicles may require
additional brackets.
BA 184 – Static 3 point
BA 187 – Lap belt
BA 188 – 3 Point Inertia Seat belt - Standard
BA 188A – 3 Point Inertia Seat belt - shorter reel than
BA188
BA 188B – 3 Point Inertia Seat belt - Angled reel
50
Ref No
Item
Description
Trim
Units
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
2401XS
2446XS
2447
2448XS
2440XS
2445XS
2092XS
2404XS
2405XS
2406
Re-trim Kit
Re-trim Kit
Re-trim Kit
Re-trim Kit
Complete Seat
Complete Seat
Complete Seat
Complete Seat
Complete Seat
Conversion Kit
(Sub Frame)
Drivers/Passenger
Rear Fold up
Centre Seat
110 Second Row 60/40 Split
Drivers/Passenger
Centre Seat
Rear Fold up
Low Back 110 Second Row
High Back 110 Second Row
Leather
Leather
Leather
Leather
Leather
Leather
Leather
Leather
Leather
Each
Each
Each
Each
Pair
Each
Each
Each
Each
Adapts to accept BA 2404/5XS
Leather
3 Seats
BR
BR
BR
BR
2016
2016G
2016D
2016T
Seat
Seat
Seat
Seat
Drivers/Passenger
Drivers/Passenger
Drivers/Passenger
Drivers/Passenger
Black
Grey Vinyl
Denim Twill
Techno
BA
BA
BA
BA
2440G
2440DT
2440T
2440L
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Drivers/Passenger
Drivers/Passenger
Drivers/Passenger
Drivers/Passenger
Grey Vinyl
Denim Twill
Techno
Black Logo
BA
BA
BA
BA
2445G
2445DT
2445T
2445L
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Centre
Centre
Centre
Centre
Seat
Seat
Seat
Seat
Grey Vinyl
Denim Twill
Techno
Black Logo
BA
BA
BA
BA
2401G
2401DT
2401T
2401L
Re-trim
Re-trim
Re-trim
Re-trim
Drivers/Passenger
Drivers/Passenger
Drivers/Passenger
Drivers/Passenger
Grey Vinyl
Denim Twill
Techno
Black Logo
Rear Fold up
Rear Fold up
Black Logo Each
Techno
Each
Base
Base
Base
Base
Kit
Kit
Kit
Kit
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
BA 2446L
BA 2446T
Re-trim Kit
Re-trim Kit
BA 2404L
BA 2404T
BA 2404G
Complete Seat Low Back 110 Second Row
Complete Seat Low Back 110 Second Row
Complete Seat Low Back 110 Second Row
Black Logo Each
Techno
Each
Grey Vinyl Each
BA 2405L
BA 2405T
BA 2405G
Complete Seat High Back 110 Second Row
Complete Seat High Back 110 Second Row
Complete Seat High Back 110 Second Row
Black Logo Each
Techno
Each
Grey Vinyl Each
BA 2077*
BA 2078*
BA 2079*
Complete Seat High Back
Complete Seat High Back
Complete Seat High Back
Black Vinyl
Caviar
Brushwood
BR
BR
BR
BR
1696*
1696G*
1696M*
1696T*
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Hinged
Hinged
Hinged
Hinged
BA
BA
BA
BA
BA
2092*
2093*
2093G*
2092T*
2093L*
Complete
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Seat
Rear
Rear
Rear
Rear
Rear
Fold-up
Fold-up
Fold-up
Fold-up
Fold-up
BA
BA
BA
BA
BA
BA
2080*
2080T*
2081*
2082AB*
2080D*
2080L*
Complete
Complete
Complete
Complete
Complete
Complete
Seat
Seat
Seat
Seat
Seat
Seat
Rear
Rear
Rear
Rear
Rear
Rear
Forward
Forward
Forward
Forward
Forward
Forward
Rear
Rear
Rear
Rear
Bench
Bench
Bench
Bench
(side
(side
(side
(side
(side
(Side
(Side
(Side
(Side
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing)
Facing
Facing
Facing
Facing
Facing
Facing
Black Vinyl
Grey Vinyl
Moorland
Techno
Moorland
Black Vinyl
Grey Vinyl
Techno
Black Logo
Black Vinyl
Techno
Moorland
Grey Vinyl
Denim Twill
Black Logo
Pair
Pair
Pair
Pair
Pair
Pair
* Seats also suitable for fitment to SERIES vehicles
www.bearmach.com
to order – contact official stockists
DEFENDER
L AND ROVER
LEATHER XS SEATING
BA 2440XS
Bring your Defender up to XS level
of trim with this stylish range of
seating. The seats are trimmed in
leather with a centre fabric panel
for extra comfort - with white
stitching. Available for all 90 and
110 models
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 2405XS
BA 2092XS
BA 2404
STEEL-FRAMED SECOND ROW SEATS
The Trakkers Classic HI- Back seat is designed with the comfort and safety of
your second row passengers in mind, supplied as backrest and base. For use
with vehicles that have an existing bench seat or 60/40 split, new frames will
also need to be purchased - please contact us for details.
The CLASSIC is available as Hi- or Lo-back to give
you the choice of a matched set of three for your
vehicle or for added visibility the Lo-Back is useful
in the centre of the row.
Refer to the chart
for full range of seats
available.
HIGH BACK
SEATS
BR 1696
Complete seat with
in-built headrest.
Suits early 110 only.
(Photo illustrates a
logo cloth version).
REAR BENCH SEAT
Side facing bench seat. (Fitted one per side for
88/90 and 2 per side for 109/110). Comes
complete with hinged frame and fixings.
REAR INDIVIDUAL
SEATS
Individual seating for the
back of your Defender.
Available as side or
front facing and they
are complete with all
necessary
fixings.
BA 2401
Complete kits with all necessary components to
give your existing seating a new lease of life.
Includes covers and foams for you to fit yourself.
Refer to the chart for fitment and trim available.
seating
RETRIM KITS FOR ALL SEATS
BA 2092T
SEAT HEATER
WATERPROOF SEAT COVERS
Seat Heater available built-in to
new seats or DIY kit to fit inside
your seats. With full fitting
instructions wiring loom and
switches. Sold for pairs of seats
only.
Pair of Waterproof Seat Covers available in
Grey. Tailored fitting, quickly and easily fitted
and removed. Ideal for farmers, builders,
surveyors and all outdoor activities.
BA 2410
BA 2410
to order – contact official stockists
Heater (pair)
BA 068
To fit Defender (set of 3)
BA 068
www.bearmach.com
51
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
EXMOOR SEATING
Bearmach is proud to announce an extension of the Exmoor Trim
range, with the capacity to now supply the whole range, an increasing
amount of which is now being stocked by Bearmach. We have added a
Cobra range of seats Trimmed by Exmoor Trim, and will be stocking
certain variants, with more cloths continually added to the range.
Some seats will remain special order.
Cobra Seats, by Exmoor Trim.
Le Mans
Opus
Cobra Seats, by Exmoor Trim.
The Le Mans Seat
Monaco
seating
Forward Facing Lock and Fold Rear seat
System.
With the introduction of new child safety Laws, and
the age old problem of fitting a ‘safe’ seat in the load
area of a Defender. The Lock and Fold seat is fully
compliant with all current standards and laws. The
seat has the ability to remain side facing
incorporating a lap belt, but also has the ability to
face forward enabling fitment of child seats and
improved vehicle safety. The seat comes with an
integrated seatbelt, and has an optional headrest and
arm rest. Seat is simple and easy to fit with a full
fitting kit supplied.
Whereas it is possible to fit 4 seats in the back of a
90 or 110 Station Wagon, it would only be possible
to take advantage of the 4 seats while facing
sideways, yet only 2 when facing forwards.
While all trim styles are available on demand, we can
offer Techno and XS from stock, with the additions of
vinyls and other cloths later in the year from stock.
BA
BA
BA
BA
2460T – RH Lock and Fold Seat Techno
2461T – LH Lock and Fold Seat Techno
2460XS – RH Lock and Fold seat XS half leather
2461XS – LH Lock and Fold seat XS half leather.
52
www.bearmach.com
Height adjustable head restraint
Defined side seat cushions for lateral support
Dual sided recline facility
Dual sided tilt forward facility
Othopaedic back rest and lumbar support
Ergonomic design
Low cut side cushions for easy exit/entry
BA 2454L - Le Mans in Black LR Logo Cloth
BA 2454XS - Le Mans in XS style Half Leather
The Opus Seat
Deep sided bucket support
Integral head and and shoulder supports
Dual sided recline facility
Dual sided tilt forward facility
Orthopaedic back rest and lumbar support
Four point harness facility
BA 2458L - Opus seat Trimmed in Black L/R
Logo cloth
The Monaco G4 Seat
Monaco G4 Seat has a G4 Style trim with orange
wear strips and the G4 vinyl material as the main
Trim, making it suitable for use in all conditions.
This seat is FIA approved, and homologated.
Please note mounting brackets are not included
Full steel construction with solid back and base
Deep sided bucketed support
Integral headpad and shoulder supports
Full 5/6 point harness facility
aditional side impact detection
FIA approved
BA 2450G4 - Monaco G4 Seat
to order – contact official stockists
DEFENDER
L AND ROVER
TM
Outlast Systems
Outlast was originally designed for NASA to protect
astronauts from extreme tempreature fluctuations.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
With seating that includes Outlast you
feel “Not Too Hot… Not Too Cold…
Just Right™”
Less overheating - reduced tirdness
Less fatigue - More alert
Adapts to your natural thermalm needs
Ability to apply to virtually any fabric during
manufacture.
Smart fabric technology
Bearmach has introduced an introductory
range of products featuring the Outlast
materials, and are pleased to offer the
following :-
Photos show complete modular seats yet
they illustrate the same colours available
in the canvas covers range
Outlast Seating Covers
Defender Seating Covers covered in Black, Green and
Sand Canvas all with Outlast.
BA 068OBC - Outlast treated Black canvas covers
(Pair) Defender Front
BA 068OBG - Outlast treated Green canvas covers
(Pair) Defender Front
BA 068OBS - Outlast treated Sand canvas covers
(Pair) Defender Front
Moulded Mat Systems.
These durable mat systems improve sound deadening and heat transfer
from the gearbox and exhaust system. They provide excellent protection
from all dirt and are easily cleanable. The mat system is made from
polyethylene, to give a very hard wearing product. Mat systems are
available for the Series and Defender models.
Outlast Retrim Kits
Defender Retrim Kits to cover the front seats in Black Lakeland cloth with
Outlast
BA 2401OB - Retrim Kit Pair Front Seat Defender
This range will increase as
trim cloths with Outlast
are expanded.
seating
BA 2480 - Moulded Mat system for Defender with R380/LT85/Automatic
gearbox To 2006
BA 2481 - Series 2/3 Moulded Mat system only for 4 cylinder engines
BA 2482 - Moulded mat system for Defender with LT77 gearbox
Load Area Matting
Heavy duty, ribbed, rubber matting
to suit rear load areas.
BA 2483 - 88/90 and 109/110
County station wagon matting
BA 2484 - 109/110 Hard Top rear
rubber matting
to order – contact official stockists
www.bearmach.com
53
DEFENDER
accessories
L AND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
STEERING WHEELS
We have a range of
quality, stylish steering
wheels from MOMO,
RAID, SPARCO and
MOUNTNEY for all
Defender applications –
together with bosses to
suit. More styles are being
added every day.
3 SPOKE WHEEL
MATS
Hard-wearing Mat sets specifically shaped to suit each model. All mats have
in-built heel pads on both sides for longer life. Please specify colour when
ordering.
BA 150
BA 151
For Defender 90/110
BA 047/A
Def 90 two piece carpet set. Waterproof carpet/mat sets,
Charcoal.
Def 110 two piece carpet set, Charcoal.
BA 047/B
Three spoke design chrome
or black spokes available
HEAVY DUTY
RUBBER MATS
Bearmach have recently
introduced a new range
of quality rubber mats.
Strong and waterproof,
the weight of these mats
ensures that they do not
move when in the
vehicle and keep the
carpet clean.
BA 3501 – Pair Rubber Mats for Defender (Front)
BA 3510 – Pair Rubber Mats for Defender 110 (2nd row)
14" Vinyl wheel.
15" Leather wheel
Steering Wheel Boss to suit 90/110, Defender up
to 1991 and all County Station Wagons
BA 154
Steering Wheel Boss to fit BA 150
and BA 151
MOUNTNEY
A plastic moulded steering wheel - especially designed for comfort with an
ergonomic grip area.
BA 3202
Black moulded steering wheel - 340mm
A classic wood wheel with high
gloss finish and 3 chrome spokes
BA 3203 Wood Rim Steering
Wheel - 350mm
BA 3209
Horn Push for
Mountney Wheels
LAND ROVER RUBBER MATS FOR DEFENDER
BTR7895
BTR7896
BTR7897
BTR7898
–
–
–
–
Land
Land
Land
Land
Rover
Rover
Rover
Rover
Rubber
Rubber
Rubber
Rubber
Mat
Mat
Mat
Mat
for
for
for
for
LT77 (LH Front)
LT77 (RH Front)
R380 (LH Front)
R380 (RH Front)
SOUND PROOF KITS
Supplied in pre-cut felt pieces, this sound proofing
kit covers the cab and under bonnet area. Tailored
to fit precisely. Does not include glue.
mats & steering wheels
BA 112
Soundproof Kit for DEFENDER 90/110
BA 2009 – Roll of self sound-proofing felt
(54” x 36”)
MOMO
DOOR TRIM KIT
BA 049
BA 049A
BA 049
54
BA 044
Door Trim Kit for
Series 2/3 and early
Defenders. Supplied as
a kit to trim two front
doors, available with
armrest.
Side door trim kit
manufactured in ABS,
to suit 90/110
Station wagon rear
door trim.
These are quality genuine leather
sports steering wheels ideal for
the rigours of off-roading.
BA 3207 Black Leather Wheel
- 350mm
BA 3208 Black Alcantara
Wheel - 350mm
Steering wheel bosses to fit the above wheels BA 3202 – BA 3208 are
available to fit 36 or 48 splined columns, please specify which model the boss
is required for:
BA 3200 Boss required for above (36 splines)
BA 3201 Boss required for above (48 splines)
www.bearmach.com
to order – contact official stockists
accessories
BEARMACH
Genuine, O.E.M and
Branded Parts:
Apart from this range of
accessories, don’t forget that
Bearmach supply replacement
Branded, O.E.M. and Genuine
Parts suitable for every Land
Rover anywhere in the world.
Bearmach produces vehiclespecific parts catalogues
listing all the most often
requested parts for servicing
your vehicle and with clear
diagrams to help you identify
the required part.
OFF-ROAD
GIFTS&ESSENTIALS
W
hichever Land Rover you own there
are some items which you can’t do
without if you enjoy your off-roading.
This section lists some things
which will fit any Land Rover like the
Wheels and Tyres and Specialist tools.
There are Essential Off-Road items you
may want to keep in your vehicle at all
times like Sand Ramps and Cooler
boxes.
Winches are a major asset for the
serious off-roader, that’s why Bearmach
offers you a wide range, including the TMax brand which is exclusive to
Bearmach.
Then there’s a range of personal
items from torches to key-rings which
will make ideal gifts at any time for
Land Rover enthusiasts.
NOTE: Manufacturers parts numbers are
used for reference purposes only.
CONTENTS
Wheels and Tyres
Specialist Tools
Off-Road Essentials
PAGE
124~125
126
132-133
Sand Tracks • Hi-Lift Jacks •
Jerry Cans • Compressors
Winches Equipment 127~131
Roof Racks & Towing 134~135
Electrical
Diagnostic Equipment
Performance Chips
Torches
Driving Lamps & Lighting
Portable Power
Cool Boxes
136
137
139~140
141~142
143~144
145
Gifts
Models and Toys
Mugs & Keyrings
Clothing
DVDs
Books
Price List
146~148
148~149
150
150
151~153
154~161
wheel covers
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
COMPOMOTIVE RALLY RAID
WHEELS
Heavy duty off-road alloy wheels designed for
heavy off-road competition. Will take the toughest
impacts and yet are stronger and lighter than
steel wheels.
See chart on next page for fitment.
SPARE WHEEL
COVERS
Made from black vinyl or hard
plastic with elasticated edge for
secure and easy fitting. Will
help keep spare wheel free from
dirt and rust.
Available in plain black or with
printed motif – please specify
which design you require.
STAINLESS STEEL WHEEL COVERS
Stainless Steel outer with Silver Middle.
Please note: These are high quality covers - not to be confused with anything
currently available in the UK.
BA
BA
BA
BA
BA
057 – For tyres 195 x 15 (Freelander)
057A – For tyres 215 x 70 x 16 (Freelander)
057B – For tyres 205 x 16 (Discovery / RR)
057C – For tyres 235 x 70 x 16 (Discovery, Range Rover)
057D – For tyres 265 x 70 x 16 (Defender) and 750 x 16
LOCKING WHEEL
NUTS
Each of the following sets
is supplied complete with
individually keyed
applicator for secure
removal and fitting
Part No
Tyre Size
BA 042/A
BA 042AH
BA 042AP
BA 042B
BA 042BH
BA 042BP
BA 042PP
BA 041
BA 042
BA 042HP
BA 042P
BFA 7003
BFA 7004
BFA 7005
205
205
205
235
235
235
235
600
750
750
750
15”
16”
17”
124
x 16”
x 16”
x 16”
x 16”
x 16”
x 16”
x 85 x 16”
x 16”
x 16”
x 16”
x 16”
Wheel
Wheel
Wheel
Vinyl (V)
Hard Plastic (H)
Plain (P)
Logo (L)
Suitable for
Vehicle
V
H
V
V
H
V
H
V
V
H
V
H
H
H
L
L
P
L
L
P
P
L
L
P
P
L
L
P
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Def/Dis
Freelander
Freelander
Freelander
BA
BA
BA
BA
017A
017C
018B*
018C*
BA 017B
BA 017C/5
BA 017C/
BA 018D
BA 018
www.bearmach.com
Set of 4 Locking Wheel nuts for steel wheels
Set of 4 Locking Wheel nuts for OEM type alloy wheels
Set of 5 Locking Wheel nuts for standard wheels
Set of 5 Locking Wheel nuts for OEM alloy wheels
*Fits Ser3, Def, Dis, RR
Set of 4 Locking Wheel nuts for alloy wheels (non OEM)
Set of 4 Locking Wheel nuts for Range Rover P38 alloy
wheels / Discovery 2
Set of 5 Locking Wheel nuts for Discovery 2 / RR P38
Set of 5 Locking Wheel nuts for OEM alloy wheels
to fit Disco3 / RR Sport / RR L322
Set of 4 Locking Wheel nuts for Freelander
to order – contact official stockists
GIFTS&ESSENTIALS
WHEELS
Alloy wheels not only enhance the appearance of your off-road
vehicle but they can also help your on-road performance.
Some people also like to keep a set of steel wheels just for serious
off-road use.
OFF-ROAD
We stock a wide range of Steel and Alloy Wheels and here we list
the most popular styles and sizes. If your requirement is not listed
here we’re sure we can help – please call for availability.
BA 015C
BA 015D
BA 015E
BA 015F
BA 3400
BA 3401
BA 3406
BA 3416
BA 3417
BA 3419
wheels
BA 014 &
BA 015
accessories
BEARMACH
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
ANR5307RQJ
WHEELS 15" STEEL
BM Part No
Size
BA
BA
BA
BA
15"
15"
15"
15"
014
014A
014B
014C
x
x
x
x
7"
7"
8"
10"
Description
Tubed Tubeless Fitment
White Steel 8 Spoke.
Chrome Steel 8 Spoke.
White Steel 8 Spoke.
White Steel 8 Spoke.
Ser
Ser
Ser
Ser
Standard wheel
Ser / Def 90 & 110 / Dis / RR Classic
Ser / Def 90 & 110 / Dis / RR Classic
Ser / Def 90 & 110 / Dis / RR Classic
Fits drum and disc brakes
Fits drum and disc brakes
Fits drum and disc brakes
Compomotive AT Alloy
Def 90 & 110 / Dis / RR Classic
Compomotive VS Alloy
Compomotive XS
Compomotive Rally Raid
Compomotive Rally Raid
Dragon Alloy
ANR1689MNH - Silver
As BA 3417 but in Anthracite
Replica 5 Spoke Wheel
Excite 5 Alloy
Def 90 & 110 / Dis / RR Classic
Dis / RR Classic
Dis / RR Classic / Def
Disco 2 / RR P38
Def 90 & 110 / Dis / RR Classic
Dis / RR Classic / Def
Dis / RR Classic / Def
Disco 2 / RR P38
Dis / RR Classic / Def
Inc wheel nuts and caps. Similar to
Freestyle wheel ANR1689MNH
Inc wheel nuts and caps.
WHEELS 16" STEEL
BR 2240
ANR4583P
BA 015
BA 015A
BA 015C
BA 3403
BA 015D
BA 015E
BA 015F
16"
16"
16"
16"
16"
16"
16"
16"
16"
x
x
x
x
x
x
x
x
x
5.5"
6.5"
6.5"
7"
7"
7"
7"
8"
8"
Standard Black Steel Wheel
Heavy Duty Steel (Wolf) Wheel
White Steel 8 Spoke
White Steel 8 Spoke.
Grey Steel Modular.
Silver Steel 8 Spoke.
Black Modular
White 8 Spoke.
Silver Modular.
WHEELS 16" ALLOY
BA 3400
16" x 7"
BA 3401
16"
BA 3416
16"
BA 3421
16"
BA 3422
16"
BA 3402
16"
BA 3417
16"
ANR5307RQJ 16"
BA 3419
16"
BA 3407
16"
x
x
x
x
x
x
x
x
x
7"
7"
7"
7"
7.5"
7"
7"
7"
7"
/
/
/
/
Def
Def
Def
Def
More Info
90
90
90
90
&
&
&
&
110
110
110
110
/
/
/
/
Dis
Dis
Dis
Dis
/
/
/
/
RR
RR
RR
RR
Classic
Classic
Classic
Classic
Fits
Fits
Fits
Fits
drum
drum
drum
drum
and
and
and
and
disc
disc
disc
disc
brakes
brakes
brakes
brakes
For heavy off-road competition
For heavy off-road competition
Inc wheel nuts and caps.
Freestyle alloy
Freestyle alloy
Alloy
WHEELS 18" ALLOY
BA 3406
RRC00002
18" x 8"
18" x 8"
Triple Sport Alloy. Similar to STC8516 Hurricane, Silver Sparkle Alloy
WHEELS 20" ALLOY
BA 3420
20" x 9"
Stormer look-a-like Alloy
to order – contact official stockists
Disco 2 / RR
Disco 2 / RR
Best selling RR replica wheel
Disco 3 / RR L322 / RR Sport
Higher load rating than O.E. Will fit
other models with adapters
www.bearmach.com
125
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
BA 2154
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
3 POINT SAFETY
HARNESS
SPECIALIST TOOLS
Ideal for competition
use or for that added
safety. Mounts on lower
fixings, top mount will
need to be repositioned
in vehicle. Suits Series
1, 2, 3 and Defender
QUALITY TOOLS
Occasionally you need a specialist tool to do the job correctly and easily below are the popular ones that Bearmach stock.
BA 3130
Impact deep hub socket
52mm (with 1/2" drive)
BA 3131
Viscous Fan Spanner 32mm
BA 2154 – 3 Point
Safety Harness
BA 3132
Viscous Fan Spanner 36mm
BA 3130
FULL HARNESS COMPETITION SEATBELTS
BA 3039
Hub Nut Spanner
A new range of harness seat belts to provide restraint for all competition
types. From standard 4 point for the clubman to 6 point for full international
competition. All belts are 3" webbing and use eyelet mountings. FIA versions
feature quick release metal buckle.
BR 0814
Very Heavy Duty Wheel nut
Wrench for Series 3,
Defender, and Discovery
specialist tools
BA 3131
BR 0814
BA 3039
BR 0815
BR 0815
Heavy Duty Wheel nut
Wrench for early Series
Vehicles
Not illustrated
BA 3040
Distributor Timing Pump
Tool
LRT60-004
Radius Arm Bush Installer
for Disco 2 and P38
LRT54-008B
Front Axle Ball Joint
replacer for Disco 2 and P38
Seatbelts Universal
BA 2580 4 Point
BA 2581
BA 2582
BA 2583
BA 2584
BA 2585
BA 2586
BA 2587
BA 2588
126
E-Marked
TIMING TOOLS
LRT12045
LRT12003 – Flywheel Timing Pin 4
Cylinder Diesel
LRT12030 – Injection Pump Timing
Tool for 2.5 Diesel
Retainer Fuel Injection Pump Gear
for TDi
LRT12049
Crank Damper Puller 300 TDi
LRT12085
Flywheel Locking Pin for TDi
Red
Blue
Black
FIA Approved Red
Blue
Black
6 Point
Red
Blue
Black
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
WINCHING EQUIPMENT
For the serious off roader a winch can be an
essential part of the kit. The winch can be used to
get yourself and others out of all sorts of sticky
situations. With Bearmach stocking a wide variety
of winching equipment you can be sure to find all
of the gear you need and give yourself the
confidence of being able to tackle all terrains.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
WARN WINCHES
For when the going gets really tough you need the best in the line of
winches and that's why Bearmach stock Warn Winches – the range
with serious pulling power.
BA
BA
BA
BA
023
023A
024A
024B
BA 2146
winching equipment
BA 024 Magnum manufactured by WARN
8,000 pound rating for medium and light duty trucks.
All-new design features 3-stage planetary gears for quiet,
efficient operation.
Includes 80 feet of 5/16” wire rope with hook.
Complete with remote control on 12’ lead, clutch, fairlead,
battery cables.
Low profile design ideal for mid-size 4WD vehicles.
XD9000 Warn Winch, 4080Kg 12v
XD9000i Warn Winch, 4080Kg 12v
8,000lbs. As BA 024 but CE marked
XD9000 – 9,000 lb rated, 24volt version.
Will fit BM winch mounts
Warn 8274-50 Winch
SUPERWINCH WINCHES
SELF RECOVERY WINCH *
REF No
WINCH
DESCRIPTION
BA 035
BA 2131
BA 2131A
S6000
S6000
BA 036
BA 2132
S4500
BA
BA
BA
BA
BA
BA
BA
BA
BA
S2500
S2500
HUSKY 8
X6CD
X6CD
S9000
S9000
S3500
S3500
2721kg Winch with Remote and 30m Cable
2721kg Winch with Remote, 30m Cable &
Fairlead
2041kg Winch with Remote, 15m Cable &
Fairlead
1134kg Winch with Switch, Guide and Cable
1134kg Winch with Remote, Guide and Cable
3855kg Winch with Remote, Cable and Fairlead
2721kg Winch with Remote, Cable & Fairlead
2721kg Winch with Remote, Cable and Fairlead
4082kg Winch with Remote and 31m Cable
4082kg Winch with Remote, Cable and Fairlead
1588kg Winch with Remote, Cable and Fairlead
1588kg Winch with Guide and 15m Cable
2133
2133A
2134
2135
2135A
2136
2136A
2137
2137A
to order – contact official stockists
BA 037
DV-9000 Self-Recovery
Winch
DV-9000i Self-Recovery
Winch
24 Volt version
4.6 Hp heavy duty 12 volt series wound
motor allow high torque and fast line speed.
Integrated solenoid pack for complete protection of wiring.
3-stage planetary gear for higher efficiency.
The U.S. patent cone load-holding brake to securely hold the load.
Rotating ring gear clutch for free spooling.
Hand-held remote switch with (17') cord
1.8m (6') 2 gauge battery cables with connectors
Wire Rope size: Ø 5/16" x 100'
*Only for use with Winch Mounts BA2030 and BA3193
www.bearmach.com
127
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
T-MAX Winches for Real Pulling Power
T-Max winches are another exclusive
from BEARMACH, they are new to
the UK, they pack more power
than equivalent counterparts
from other manufacturers and
yet they are more
economically priced.
The T-Max range of winches offer capacities
from 2,000lbs to 11,000lbs and many features
Exclusive to
Bearmach
BA 2602
BA 2604
usually found on more expensive brands:-
BA 2603
• Single line pull
• Heavy duty series-wound motor
• Intelligent remote control system
• Galvanised aircraft cable
winching equipment
•
•
•
•
BA 2605
Replaceable clevis hook
Automatic in-drum braking
Sliding ring-gear clutch
Full range of complimentary
accessories
• Fits most mounting plates (Warn
pattern) which are also available
from Bearmach
FEATURES
Rated Line Pull
Motor
Control
Gear Train
Gear ratio
Clutch
Brake
Wire Rope
Fairlead
Remote Control
Recommended battery
Finish
Weight
Dimensions
Mounting Pattern
EW-4500
EW-6500
EW-9500
EW-11000
4500lbs (2040kgs) single line
1.6HP/12v
Remote switch (3.4m lead)
Planetary. 2 stage
159:1
Pin clutch
Self lock
15.2m x 6.4mm diameter
4-way roller fairlead
Included
440CCA min for winching
Black
16 kgs (18kgs with wire)
383L x 193D x 166H mm
102mm : 2 - Ø11mm
6500lbs (2950kgs) single line
5.5HP series wound
Remote switch (3.7m lead)
Planetary. 3 stage
172.8:1
Shift Pin Ring Gear
Automatic in-the-drum
24m x 7.2mm diameter
Hawse fairlead
Included
650CCA min for winching
Black
30kg
470L x 160W x 205H mm
166.4 x 114.3mm
9500lbs (4300kgs) single line
5.5HP/12v series wound*
Remote switch (3.7m lead)
Planetary. 3 stage
218:1
Sliding ring gear
Automatic in-the-drum
28.5m x 8.2mm diameter
4-way roller fairlead
Included
650CCA min for winching
Black/dark grey
38kg
537L x 160W x 218H mm
254 x 114.3mm
11000lbs (4985kgs) single line
5.5HP/12v series wound*
Remote switch (3.7m lead)
Planetary. 3 stage
265:1
Sliding ring gear
Automatic in-the-drum
28.5m x 8.2mm diameter
4-way roller fairlead
Included
650CCA min for winching
Black/dark grey
40kg (43kg with wire)
541L x 160W x 218H mm
254 x 114.3mm
BEARMACH Ref
BA 2602
BA 2603
BA 2604
* BA 26042 – 6HP/24v
BA 2605
* BA 26052 – 6HP/24v
EWI 12000 T-MAX WINCH
Whenever you find yourself in a tricky situation you need a winch that you
are confident is up to the job. Bearmach are
pleased to announce the introduction of a new
winch to the T-Max range with staggering pulling
NEW
power and wireless remote control.
E
The All New EWI 12000 features:
12,000Lbs (5,440kgs) Rated Line Pull
Wireless Multi-Control Remote System
6.6HP (4.0kw) Series Wound Motor
Stainless Steel Clutch and Hardware
Safety Alert Light
WI 9
T-MAX ,5000
Same fe WINCH
atu
12,000 res as the
9,500L but with a
bs capa
city
BA 2607 – 12,000lbs T-Max Winch with Remote Control
BA 2608 – 9,500lbs T-Max Winch with Remote Control
128
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
T-MAX Winches
– NEW
bodies for prolonged use.
FEATURES
Rated Line Pull
Motor
Control
Gear Train
Gear ratio
Clutch
Brake
Drum Size
Wire Rope
Fairlead
Recommended battery
Finish
Weight
Dimensions
Mounting Pattern
OUTBACK 12v 9000
OUTBACK 12v 9,500
OUTBACK 12v 12,500
9000lbs (40800kgs) single line
5.5 HP/12v
Remote switch (3.7m lead)
Planetary. 3 stage
172.8:1
Sliding Ring Gear
Automatic in-the-drum
64mm diam x 224mm
28.5m x 8.2mm diameter
4-way roller fairlead
650CCA min for winching
Dark grey
36.5 kgs
557L x 205D x 160H mm
254 x 114.3mm
9,500lbs (4532kgs) single line
5.5HP/12v series wound
Remote switch (3.7m lead)
Planetary. 3 stage
218:1
Sliding ring gear
Automatic in-the-drum
64mm diam x 224mm
28.5m x 9.2mm diameter
4-way roller fairlead
650CCA min for winching
Dark grey
38kg
537L x 160W x 218H mm
254 x 114.3mm
12500lbs (5665kgs) single line
5.5HP/12v series wound
Remote switch (3.7m lead)
Planetary. 3 stage
265:1
Sliding ring gear
Automatic in-the-drum
64mm diam x 224mm
28.5m x 9.5mm diameter
4-way roller fairlead
650CCA min for winching
Dark grey
40kg (43kg with wire)
541L x 160W x 218H mm
254 x 114.3mm
With radio control
With cable control
BA 2609
BA 2610
BA 2611
BA 2612
BA 2614
BA 2615
EWI-9000 T-MAX 12v WINCH
Bearmach are pleased to announce the introduction of a new winch designed
for those who prefer to use a synthetic recovery rope. Like all the T-Max
range it has incredible pulling power and is complete with wireless remote
control. Rope and Fairlead is not supplied to allow the user the freedom to
choose their favoured combination.
Note: The winch is designed for use on light vehicles in the U.S. type “rock
crawling” competitions, thus a short drum is provided for short ropes.
Bearmach are currently developing a longer rope version, more suited to
European competition, due autumn 2007.
The All New EWI-9000 features:
9,000Lbs (4,080kgs) Rated Line Pull
Wireless Multi-Control Remote System
5.5HP Series Wound Motor
Stainless Steel Clutch and Hardware
Weighs just 55lbs (25kg)
Drum size 63.5mm diameter x 222mm long
BA 2607 – 9,000lbs T-Max Winch with Remote Control
to order – contact official stockists
www.bearmach.com
129
winching equipment
OUTBACK SERIES
The new OUTBACK series of T-Max winches offer capacities from 9,000lbs to 12,500lbs. The OUTBACK series is a premium winch offering the best
technology at an affordable price. They all feature water resistant contacts. The 9,500 and 12,500 have stainless steel handles and improved winch
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
WINCH COVER
Keeps your T-Max Winch
free from the worst of the
weather and muck and
grime. Made from a
strong weatherproof
canvas with heavy duty
eyelets to fix securely over
the winch. (Will not fit
EWI 12000)
BA 2620
BA 2638 – T-Max Winch Cover
RADIO CONTROL BOX
Retro-fit remote control box. Water proof and features Wireless multicontrol. Cable connection supplied in case of battery failure. Suits all T-Max
Winches and can be applied to many similar winches from other
manufacturers
BA 2640
Radio Control Box
HAND WINCH
Easily stored in your vehicle ready for those simple
emergencies. Sturdily built with a rated capacity of 1600kgs
BA 2620 – Hand Wire Rope Pulling Winch
2000lbs WINCH
REMOTE CONTROL
winching equipment
(replacement part)
Ergonomically designed hand held
remote switch to suit all T-Max
Winches.
BA 2630
Remote Control Switch - suitable for
non-radio control winches
BA 2630
BA 2652
Radio Control and Receiver kit suitable for radio control winches
For light weight use only this 12v winch has a .85hp
output to give pulling
power of 2000lbs.
Includes 49’ of wire rope.
296x97x105mm,
weight5kgs
BA 2601
BA 2601 – 2000lb Winch
T-Max Quick Mount
Allows portable use of
your winch - for use with
Class 3 receivers. Accepts
up to 9,500lb winches.
BA 2665 – T-Max Quick
Mount
SOLENOID
500amp solenoid with silver coated
contacts to suit T-Max winches.
BA 2631 – Solenoid - 12v
BA 2636 – Solenoid - 24v
BA 2631
BA 2613
T-Max Winch
Extension Cable
and Quick Plugs
Heavy duty electric
Winch cables with
quick release plugs for
isolation or easy
winch removal.
BA
BA
BA
BA
T-Max Winch Accessory Kit
Everything you need for safe winching in one convenient holdall.
Contains: Tree Strop, Snatch Block, 2 x D shackles, Safety Gloves, Holdall, Tow
hook.
2675 – T-Max Quick Release Plugs (pair)
2676 – 6m Cable (1 red, 1 black) with Quick Plugs
021 – 3.5m Power Cable only (1 red, 1 black)
021A – 5m Power Cable only (1 red, 1 black)
130
BA 2613 – T-Max Winch Accessory Kit
BA 3092 – T-Max Snatch Block only (with pouch)
www.bearmach.com
to order – contact official stockists
OFF-ROAD
GIFTS&ESSENTIALS
Standard Jate Ring
Forged Jate Ring
BOW SHACKLE
SWIVEL SHACKLE
Welded steel construction with bolt
and locking nut.
Forged steel. Suitable for heavy duty
off-road recovery.
Very heavy construction with 4 point
fixing through to backing plate.
BA 2683 – T-Max Jate Ring
BA 2683A – Forged Jate Ring
Suitable for heavy duty off-road
recovery.
BA 2148 – Bow Shackle, 4.75T
BA 2149 – Bow Shackle, 8.5T
T-Max Clevis Hook
T-Max Recovery Hook
Bridle Rope
Tow Rope
3/8" Clevis hook used as
replacement hook on T-Max winches
or other eyelet cables or ropes.
Designed for quick recovery
situations - supplied with bolts and
rope retainer.
Synthetic Rope with eyelets at each
end. Lightweight yet with breaking
strain of 10 Tonnes. (2m x 24mm)
Lightweight yet with breaking strain
of 10 Tonnes. Synthetic Rope has
eyelets at each end. (4.5m x 24mm)
BA 2639 – T-Max Clevis Hook
BA 2667 – T-Max Recovery Hook
BA 2155 – Bridle Rope
BA 3008 – Tow Rope
BA 2682 – Swivel shackle
TREE STROP
Wide heavy duty webbing will
not damage trees. Nylon covered
stitched eyelets at the ends.
Breaking strain 10 Tonnes (75mm x 2.5m)
BA 2153 – Tree Strop
SYNTHETIC WINCH ROPE
ROPE RETAINER
This simple device ensures that your winch line
always maintains the minimum amount of wraps
on the drum. It is all too easy to pull out the
winch line and forget to keep five wraps on the
drum for safety. With the Rope Retainer installed
you can pull your line to your anchor point with
confidence that it won't pull loose. Great for
hidden winch mounts or in situations where you
can't watch your drum while feeding out winch
line. The photos show how easy it is to install The
Rope Retainer. Also works with steel cable.
BA 2679 – Rope Retainer
to order – contact official stockists
The best just got better! Synthetic
Winch Rope is the best option for those
whose winch ropes are in constant use.
With many advantages over traditional cable, it can be joined when broken,
it’s safer to use and easier to handle. The synthetic rope is covered with a 3m
sheath on the drum to protect against heat and a 1 metre protective sheath
at the hook end to protect
against against abrasion.
Breaking strength of
approx. 10,000 Kgs.
Also available are Splicing
Kits and a variety of other
diameters and lengths –
please enquire.
BA 2670 – Synthetic Rope 25 metres long 10mm wide with steel hook.
BA 2671 – Competition – as above but with larger hook.
BA 2672 – Fairlead to suit above rope when used on winches.
www.bearmach.com
accessories
BEARMACH
131
winching equipment
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
BA 2139
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 2139A
BA 2680
COMPLETE WINCHING KITS
WINCH BUDDY
BA 2139A – Winch Accessory Kit
Contains: Choker Chain, Snatch Block, 2m x 100mm Tree Strop, Gloves & Bag.
Breaking strain:
16,000lbs (10 tons)
Dual purpose mechanism made from
zinc plated box section steel.
Cleverly folds to act as an anchor
for the vehicle. Or when it’s flat it
doubles as a useful track to help you
get out of tricky situations.
BA 2139 – Winch Accessory Kit
Contains: Tree Strop 2m x 75mm, Snatch Block, Gloves & Bag.
Breaking strain:
16,000lbs (10 tons)
BA 2680 – Winch Buddy
OTHER WINCHING ACCESSORIES
(not illustrated)
BA 024W – Winch Wire 8mm x 30m
BA 024WA – Winch Wire 8.2mm x 28m
BA 024WH – Winch Wire 9.2mm x 27.5m - Suitable for 11,000lbs up.
off-road equipment
BA 3091 – Roller Fairlead
BA 2141 – Roller Fairlead
BA 2666 – Roller Fairlead - suitable for loads up to 6,500lbs
GROUND ANCHOR SET
A sturdy kit to give your winch an
anchor point when there’s no other
secure location.
BA 2681 – Ground Anchor Set
BA 2147 – Kinetic Rope. 4.5m x 24mm – 8 strand (for up to 12 Tonnes)
BA 2147A – Kinetic Rope. 8m x 24mm – 8 strand (for up to 12 Tonnes)
BA 2681
SAND TRACK
SURVIVAL KIT
Everything you need to cope with the
elements, complete your adventure
and expand your horizons. This
lightweight, portable kit from Gerber
contains sports saw, axe, Mag Lite,
Gerber Tool, first aid pouch and a
folding spade.
Can be used for all
types of 4 wheel drive
vehicles in all sorts of
sticky situations. Can
easily be stored on the
roof rack until needed.
Sturdily built from
4mm thick aluminium
plate. Size 150cms x
45cms.
BA 145 – Sand Track
BA 145
05635 – Land Rover Survival Kit
05940 – Folding Spade (Available
separately)
132
www.bearmach.com
to order – contact official stockists
BEARMACH
GIFTS&ESSENTIALS
JERRY CAN
HIGH LIFT JACK
The “original” high lift jack – tried
and tested in the most rugged
conditions – only the best from
Bearmach. Also available optional
extension tube, for vehicles fitted with
nudge bars.
BR 1016
Jerry Can 20 litres
BR 1016A
Jerry Can Spout to suit BR 1016
BR 1013
Jerry Can Holder nylon coated,
front mounting Series 2a/3
BA 5570
20 litre Jerry Can Holder
BA 185
Jackal. 4ft (made in
Canada). CE marked
BA 185/5
Jackal. 5ft (made in
Canada). CE marked
BA 185A
Jack extension for BA
185 and BA 185/5
BA 185G
Hi-Lift 4ft
(made in USA)
BA 185AG Jack extension for BA
185G
BR 1016A
BA 185B
Jack Rack. Versatile rack
to carry your Hi-lift or
Jackal Racks BA 185 and
BA 185/5.
BA 2140
Defender side lift jack
extension
BA 186C
Jackal Maintenance Kit
BR 1013
PORTABLE
COMPRESSOR
A powerful compressor
from T-Max available
exclusively from
Bearmach. Robustly
constructed and supplied
with coiled air-line, fitted
pressure gauge and its own
carry bag. Runs from your
vehicle’s battery giving an
air-flow of 72 litres per
min and a working pressure of 150psi.
BA 2641
T-Max Portable Air Compressor
BA 185
BA 2641
See T-Max
Winches &
Accessories on
pages 108-109
BA 185T
BA 185/5T
48" T-Max Farm Jack
60" T-Max Farm Jack
BA 185TA
Jack Adapter
BA 2668
Large Foot only
BA 185TA
DOUBLE PUMP PORTABLE COMPRESSOR
Similar to BA 2641 above but with a double pump for greater performance.
With overload protector and automatic reset.
Supplied with air pipe, gauge and tyre fittings all
in a smart canvas holdall.
Specifications: Max output: 10 Lts per min
Max pressure: 150 psi
Cylinder diam: 40mm
Max amperage draw: 45A
T-Max Jack Repair Kit
Includes pins and spring for T-Max
Jack servicing.
BA 2669 – T-Max Jack Repair Kit
T-Max Double Pump Air Compressor
to order – contact official stockists
FARM JACK
Heavy duty Farm Jack from T-Max
available exclusively from
Bearmach. Finished in a rugged
look of yellow and black and are
powder coated for durability. Two
versions available, 48" and 60", both
have a load rating of 7,000lbs. Max
lift height is 1070mm for the 48"
and 1,350 for the 60"
BA 2663
BA 2663
BA 185A
www.bearmach.com
133
off-road-equipment
BR 1016
OFF-ROAD
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
ROOF BARS
Supplied in pairs, these bars are
suitable for carrying unwieldy
items, such as ladders, and can
double up as ski or bike racks with
a simple attachment.
BA 3100
BA 043
BA 172
Heavy Duty Roof Bars
Budget Roof Bars
REAR STEP
Made from heavy gauge steel and bar, zinc plated and yellowed to give an
extra durable finish. No drilling required, bolts directly onto crossmember
and can be used on most vehicles with tow bars. A very functional accessory.
(See the Towing section for drop plates).
BA 3153
BA 172 – Rear Step
BA 043TB
SKI RACKS
Locking Flat Ski Arm can safely carry your skis anywhere. Securely locked
by use of security locks between the ski arm and the spacer, the whole system
can be removed in seconds without having to remove the roof rack from the
vehicle. Manufactured from injection molded composites and aluminium, this
accessory is light, strong and totally rust-free.
BA 3153 – Ski Rack (will suit most O.E.M. rails)
TOP BOX
roof racks
The ultimate weather proof roof system to allow you to carry everything
you need, in security, for those long weekends away or to carry all the
paraphernalia of your particular pastime. Manufactured in high impact
plastic and is aerodynamically shaped to minimise wind resistance. Will
fit any roof bar using the ‘U’ bolts supplied.
SKI/SNOWBOARD
CARRIER
BA 043TB – 350 litre capacity (51" x 39" x 14"-10")
Fits most roof bars. Clamps skis
securely between rubber-lined jaws.
Complete with fitted locks.
BA 3102 (STC7568) – Ski/Snowboard Carrier.
SECURE STORAGE
ROOF BAR
ACCESSORIES
Can be added to any of
the roof bars mentioned
on these pages.
BA 052 – Roof Rack
mounted Cycle Carrier
These 36" long chests provide 4.9 cu ft of lockable storage space.
Manufactured in aluminium
with stainless steel, recessed
hinges and full weather
stripping to seal out
moisture and dust. Gas
spring lid lift to assist in
opening and closing lid.
The ideal solution to
keeping tools and
expensive
accessories secure
in the back of your
vehicle.
Size: 36"long x
17"wide x 16"high
BA 052
134
BA 5500
Aluminium Secure Storage
Chest
www.bearmach.com
BA 5500
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
BA 191
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 193
TOWBALLS
BA 191 – Universal Coupling*
Towing capacity 3.5 tonne. 50mm Ball, with 25mm (nominal) dia forged pin,
(to suit towing eyes: minimum I.D. 28.6mm maximum section 28.6mm). 2
bolt fixing. Zinc plated finish.
BA 193 – 50mm Towball*.
3500kgs Capacity, 2 hole fixing. Zinc plated finish.
* = E Marked
UNIVERSAL
TOW BAR
WIRING KIT
BA 195
SLIDETITE TIE-DOWN SYSTEM
When we saw these products we thought – here’s the solution for hundreds of
tie-down problems when you’re out and about in your Land Rover.
SlideTite™ products are based around a simple, patent pending, locking
mechanism. The mechanism is both quick and very strong. The harder it is
pulled the tighter it locks, but never jams shut. It works in all conditions wet or dry - hot or cold.
The hook has been tested to hold 50Kg without breaking and the SlideTite™
mechanism itself to over 100Kg.
The system includes:
BA 195 – Universal
wiring kit with audible
warning
BA 195A – Universal
Towing Bypass Relay.
The Hook: A large,
strong 25mm hook for
use in most situations
where you can grab
onto an existing anchor
point.
The Plate: Provides a
permanent anchor
point. Screw or glue
the plate to any surface
to hold stuff in place.
The Binder: Two
SlideTite™ devices
back to back. For use
wherever you need to
wrap rope / bungee
around anything.
BA 2950 – The Hook
BA 2951 – The Plate
BA 2952 – The Binder
BA 2955 – 2m length of Bungee (colour can vary)
BA 2956 – 3m length of Bungee (colour can vary)
BA 2957 – 5m length of Bungee (colour can vary)
BA 2960 - Kit 1 - 2x3m bungee 4 x hooks
BA 2961 - Kit 2 - 2x2m bungee, 1x3m bungee 4x hooks, 4x plates, 2x binders.
HOW IT WORKS
BA 3080
SPARE WHEEL MOUNTED BIKE RACK
Unique quick release arms clamp on to the spare wheel mounted on the rear
door of any 4x4 vehicle. Can be adjusted for right, left or centre mounted
tyre mounts and fits most sizes of spare tyre. Includes number plate holder
and security straps. Allows two bikes to be carried safely and securely.
1: Get some bungee
cord or rope and any
SlideTite™ product.
2: Push the bungee or
rope up through the
hole in the bottom.
3: Pull back the
bungee or rope down
into the slot to lock it
in place.
4. To unlock: ... simply
pull the rope or bungee
up out of the slot
1
2
3
4
BA 3080 – Spare Wheel Mounted Bike Rack
to order – contact official stockists
www.bearmach.com
135
towing equipment
Note: Each Land Rover also has a specific O.E.M. wiring kit
available – please see the relevant section.
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DIAGNOSTIC SYSTEMS
Bearmach is pleased to announce that we are now able to
supply diagnostic systems from entry level to full garage
systems. For the purposes of the catalogue, featured are two
systems one at an entry level, and one on a modular basis.
Customers looking for full systems should not disregard the
IDS from SPX tools, the Autologic and the Rovacom Pro
systems which are not covered in the catalogue.
ROVACOMLITE
RovacomLite from Black Box
Solutions is a modular system
that allows the system to be
built on a ‘Per ECU’ Basis,
allowing the purchase of only
one module (example TD5
engine) or a full set to cover
one or all of the Landrover
Range. Current coverage
is all models to 04MY,
with the introduction
of the Discovery 3,
Range Rover Sport and
L322 Range Rover 06My
onwards now imminent.
Introducing the Nanocom
Offering solid, robust and reliable
communications, RovacomLite allows not only fault code reading
and clearing but access to vast amounts of live, real time sensor
input data which can be captured in four different ways for later
analysis, outputs which can be forced on or off for testing and simply
incredible amounts of configurable settings and information, which
can be saved and reloaded as standard HTML internet documents.
This allows new ECU coding, new or used ECU cloning, restoring
ECU contents back to previous states and even repairing of ECUs
with corrupted or damaged memory contents. It can also read and
write Flash engine management ECU contents.
An entry-level system designed specifically for use on Defender TD5,
with full diagnostic capability. The Nanocom system has been
designed for the individual but can also be used in a garage
situation. The system is intended only for use on Defender TD5 and
the associated systems of alarm and ABS, enabling full diagnostic
capability to this vehicle. Discovery and further will be future
developments.
The Nanocom has the following features.
The ability to be permanently installed within a vehicle, giving
real time readout whenever required, via the integrated display.
Ability to connect to a PC with (software provided) having full
diagnostic capability with pc software.
Ability to views inputs (Engine, alarm and ABS – e.g.
temperature and vehicle speed)
Ability to actuate functions
Ability to read settings and modify settings, as well as saving
The system compromises two portions:-
diagnostic equipment
them to a memory for later analysis.
HARDWARE
Rovacom Lite vehicle server
Vehicle communications interface (Lite)
Cables and Sundry Items
Black OBDII lead (light duty) • Yellow EGR lead (light duty) • Red 14CUX /
classic air suspension lead (light duty) • Green early airbag lead (light duty)
Blue early abs lead (light duty) • Cigar lighter power lead • Battery clip
power lead • MEMS 1.6 converter (requires yellow EGR lead) • 5AS
converter (requires yellow EGR lead) • Brown CPU lead • Vehicle server to
vehicle communications interface extension lead • Power Supply 100240/12v • USB toRS232 • Serial connection lead (null modem cable)
SOFTWARE
Consisting of all the various module software for the system
Upgrading and Support
Blackbox Solutions provides all support via an online forum, and all
upgrades for purchased modules are free. New modules can be
purchased at any time for the cost of the module, and will then
become part of the system. Telephone support is also offered via a
3rd party on an annual subscription rate.
For further information and ordering on RovacomLite, please
contact Bearmach directly.
136
The integrated display not only displays data for clearing of fault
codes and real time information, but also has the ability to display a
permanent screen with voltage engine temperature turbo boost and
more. The screen can be automatically set to switch on every time
the vehicle is running without further user intervention, thus
providing extra gauge information digitally.
The system uses the vehicle’s power and enters sleep mode when
unused, drawing minimal current when the engine is off or left
overnight.
Nanocom is the ideal companion for self-servicing or for any
journey, long or short. For the individual or fleet operator, on a home
driveway or in the middle of a site. Diagnostics are no longer reliant
on specialists, and problems can be diagnosed while the vehicle is
still in the field.
BA 5010 Nanocom System including Cables
BA 5011 Fitment kit for Defender
BA 5012 USB to serial cable – not included in kit.
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Performance
Chips
Bearmach now supply a range
of power upgrade chips for
most Diesel Land Rover
vehicles. They are easy to fit –
they just plug in and you drive away benefiting
from the improvements in power, torque and
efficiency!!! A superb performance upgrade
whether you want better on-road speed and
acceleration or more torque to enhance towing
capabilities, we can supply you the chip to suit
your needs.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
POWERPLUG –
The easy Plug in
and Drive Digital
tuning system
Vehicle
POWERPLUG is a
state-of-the-art diesel
performance upgrade
based on UNICHIP
technology. Developed on a
dedicated rolling road with hyperaccurate dynamometers they produce
maximum safe power levels.
POWERPLUG is the only power upgrade able to control fuel injection
quantity, point of injection AND turbocharger boost pressure – all without
increasing smoke emission or economy.
POWERPLUG uses original manufacturers’ connectors to connect to the
ECU so that you can be sure of an easy-to-instal, perfect fit and perfect
performance every time.
Typical Power/
Torque Increase
DEFENDER
Defender TD5 (to 01MY)
+40bhp/30ft.lbs Torque
Defender TD5 (02MY onwards)
+40bhp/30ft.lbs Torque
DISCOVERY
Discovery TD5 (to 01MY)
+40bhp/30ft.lbs Torque
Discovery TD5 (02MY onwards)
+40bhp/30ft.lbs Torque
Discovery TD5 (to 01MY Auto)
+40bhp/30ft.lbs Torque
Discovery TD5 (02MY onwards Auto) +40bhp/30ft.lbs Torque
FREELANDER
Freelander 2.0 sdi
+25bhp/3Oft.lbs Torque
Freelander TD4 (up to 2000)
+25bhp/3Oft.lbs Torque
Freelander TD4 (2000 on)
+25bhp/3Oft.lbs Torque
RANGE ROVER
Range Rover DT/DSE
+25bhp/42ft.lbs Torque
Benefits of the Dastek PowerPlug:
Better Acceleration More Power More Torque Improved Fuel
economy Improved Driveability Direct Plug-in device No wiring
necessary Fully re-mappable for possible future upgrades
Order Ref
BA 2178
BA 21782
BA
BA
BA
BA
2177
21772
2177A
2177A2
BA 2176
BA 2176A
BA 2176B
BA 2174
BA 4200 – Range Rover TD6
+40bhp/60ft.lbs Torque
BA 4201 – Disco 3/ RR Sport TDV6
BA 4202 – ECU Re-location loom TD5 Def & Di2
TURBO GUARD
EFFECTIVE PROTECTION FOR ALL TURBO DIESELS
Easily fitted to all
Turbo Diesel vehicles
in the Land Rover
Range – this is the
most effective way to
guarantee a longer life
for your turbocharger
and diesel engine.
WHY DO YOU NEED A TURBO GUARD
Hot engine shut-downs and cold start-ups are the prime cause of
turbocharger failure. Revving the engine before full oil pressure is achieved
can cause serious problems to the turbocharger – particularly in colder
weather climates.
Just as serious is the effect of shutting down the engine while it is still hot.
Shutting the engine down immediately after a run stops the oil pump and
thus the oil flow to the turbocharger. In fact oil that is left in the
turbocharger bearings can form a carbon and varnish build-up. These
problems can be further exacerbated if a vehicle is frequently started and
stopped – as with some delivery vehicles.
to order – contact official stockists
TURBO GUARD is specifically designed to overcome these problems
– it provides pressurised oil to the turbocharger at all times the engine is
operating. When the turbocharger is not operating the oil is still present in
the system, ready to be distributed immediately on start-up.
HOW TURBO GUARD WORKS – The TURBO GUARD
consists of a oil reservoir that connects to the oil line feed to the
turbocharger. A check valve permits pressurised oil to flow into the reservoir
providing an immediate supply of oil to the turbocharger at shut-down and
start-up.
INSTALLATION – only requires the fitting of a mounting bracket,
adding a fitting into the inlet oil line and make a hose connection – this can
be carried out in less than an hour by any competent DIY mechanic.
www.bearmach.com
137
performance chips
BA 2188 – Turbo Guard
Oil Feed for Diesels
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
V8 INJECTION ENGINES
Performance parts for all Land Rover V8 engines
SPARK PLUGS
B7ECS
Standard competition Spark Plugs
PFR7B
Platinum Tip Spark Plugs
INJECTORS
electrical equipment
Only for use with chipped ECUs
INJ2006 Bosch 250cc/Min Injectors
INJ2007 Weber 235cc/Min Injectors (fine spray)
Tyre Pressure Monitoring System
Monitor your tyre pressure whilst driving. Four sensors send tyre pressure
information via radio to a control unit mounted in the vehicle. The system
provides both an audible warning tone and an LED indicator to warn of low
tyre pressure.
Ingenious NEW High Tech Device!!!
•
•
•
•
Monitor your tyre pressure whilst driving
Four sensors.
Audible warning tone and an LED indicator.
Pressure information via radio to a control unit.
BA 5502 Tyre Pressure Monitoring System
Bugs and grease collect
on your windscreen and
seriously affects
visibility.
Turning on your
windscreen wipers
often decreases
your visibility
even more
Parking Sensors
These sensors neatly integrate
into the vehicles bumper and
will detect obstacles behind or
in front of your vehicle whilst
manoeuvring into position. As an
obstacle is approached the sensors
trigger the acoustic alarm which rises
in frequency the closer the vehicle gets.
Windscreen Cleaning System
HotShot stands for quick and optimum cleaning of your windshield, removing
virtually all types of dirt by using heated washer fluid. At the touch of a
button, HotShot heats the washer fluid to about 65°C (150°F) within 30
seconds and sprays it onto the windshield. Due to the improved cleaning
power of the heated fluid, HotShot can then remove the soluble dirt more
effectively than any other product on the market today.
Hotshot for a perfectly clean windscreen in all seasons!
• Efficiently removes all dead insects, dust, salt and detergent residue, mud
and oil.
• Prevents cleared windscreen from fogging or freezing over again before
starting your journey.
• Clean windscreen all year round.
• Increased safety due to visibility.
• Convenient cleaning at the touch of a button.
BA 5501 Windscreen Cleaning System
138
No More Dents To Your Vehicle (or Others’)
•
•
•
•
•
•
Quick and easy to install.
Fits any vehicle including all Land Rover models.
Choose 2, 3 or 4 sensor kits.
3 Level buzzer alarm to indicate obstacles.
12 or 24 volt power supply.
Sensors can be painted to match vehicle.
BA 5503 – Rear Parking Aid System
www.bearmach.com
to order – contact official stockists
C YBA -L ITE T ORCHES
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
TOMORROW’S TECHNOLOGY TODAY
Cyba-Lite is a range of hi-tech torches in up to the minute styles and
utilising hard wearing materials, designed to meet the exacting
standards required of today’s outdoor activities.
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
3 Mode Operation – The models below all operate in 3 modes - 1
click switches to Low Beam with 3 LEDS; click again for High Beam with 6
LEDS; click again for Long Distance mode with a Xenon bulb.
BA 5104
MINI CYBA-LITE
Ultra bright, high tech white LED, low power consumption. Machined
aircraft aluminium, rubber inlaid grip, water resistant with keyring chain.
Size: 47mm x 18mm
Ultra bright, high tech white LED’s, low power consumption, Krypton bulb
for long distance light output, focus spot to flood control on ‘Long Distance’
mode, shock resistant
rubber, lamp adjusts
through 90º to focus on
work area, adjustable
head strap with padded
front section, fully sealed
switch, rubber seal for
maximum water
resistance.
Size: 57mm x 66mm
diameter.
BA 5104 – Mini Cyba-Lite
BA 5106 – Cyba-Lite
Headlight
BA 5106
CYBA-LITE – N16 XENON RECHARGEABLE
Ultra bright, high tech white LED’s, low power consumption, high pressure
Xenon bulb for long distance light output, advanced technology multisurface reflector for precision directed light output, focus spot to flood
control on ‘Long Distance’ mode (Xenon), machined aircraft aluminium,
heavy duty, diamond grooved grip, fully sealed switch, rubber seal for
maximum, water resistant, handy carrying strap.
Complete with Ni-cad battery and charger.
Size: 177mm x 39mm
BA 5105
BA 5108 – Cyba-Lite N16 Xenon
Rechargeable
MINI CYBA-STRETCH
Ultra bright, high tech white LED, low power
consumption with a ‘magnifier’ lens providing
more focused, powerful and longer beam.
Machined aircraft aluminium, hand held torch or
area light, water resistant, comes with handy
carrying strap. Size: 126mm (closed) x 30mm
BA 5105 – Cyba-Stretch
CYBA-LITE – A36 XENON ALKALINE
3 mode operation. Advanced technology multi-surface reflector for
precision directed light output, focus spot to flood control on ‘Long
Distance’ Mode (Xenon), machined aircraft aluminium, rubber inlaid grip,
fully sealed switch, rubber seal for maximum water resistance, handy
carrying strap. Size: 137mm x 40mm.
BA 5107 – Cyba-Lite A36 Xenon Alkaline
CYBA-LITE – FIREFLY
High strength machine crafted aluminium body. Ultra bright, high tech
white LEDs burn for up to 100,000 hours with a battery life of up to 12
hours. Size: 70mm x 22mm.
BA 5110 – Cyba-Lite Firefly - Black
BA 5111 – Cyba-Lite Firefly - Blue
to order – contact official stockists
www.bearmach.com
139
torches
CYBA-LITE HEADLIGHT
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
ROTATING
HALOGEN
SPOTLIGHT
BA 3111
torches
BA 5109
This awesome spotlight simply plugs into your cigarette lighter and using the
joystick control you can switch it on/off and direct the beam up and down (to
75°) or from side to side through 340°. The base is a super-strong, leveroperated suction cup to mount it to your vehicle’s bodywork or there is a
robust swinging handle for hand-held use.
BA 3111 – Rotating Halogen Spotlight
BA 5160
LED STORM LANTERN
Ultra bright LED lantern with 12
virtually indestructible LEDs. Ideal
for camping and all outdoor pursuits.
On/off switch also provides a dimmer
function. All plastic body has folding
handle for carrying or hanging.
Runs on 4 x D batteries (not included)
for up to 10 days on minimum or 40
hours on maximum.
Size: 222mm high x 121mm
BA 5109 – LED Storm Lantern
12v LED Inspection Lamp
Cordless 12v Rechargeable LED Inspection Lamp
• 60 x bright white led's
• Oil/Shock resistant & weatherproof
• Long lasting - more than 5-6 hours
• Hanging (swivel) hook
• Quickcharge - 1.5hrs
• Charge: mains or cigar lighter adaptor
BA 5160 – LED Inspection lamp.
140
www.bearmach.com
to order – contact official stockists
BEARMACH
GIFTS&ESSENTIALS
The name of CIBIE is legendary in
automotive lighting and
BEARMACH are pleased to offer
the following models to light your
Land Rover’s way
L IGHTING
Secondary lighting is of vital importance if
you find yourself picking your way over hostile
terrain as darkness or visibility falls. Here we
offer a range of quality lamps to suit all
pockets – all of which will fit easily to any of
our Nudge Bars or ‘A’ frames.
These tough top quality
lamps are complete with
removable black plastic
covers, wiring, switch
relay and fitting
instructions. They not
only give that extra
lighting when
necessary, but also give
an 'individual look' to the
vehicle.
Available with black or stainless
steel surrounds/rears.
CIBIE SUPER OSCAR
The CIBIE SUPER OSCAR is a round auxiliary lamp especially developed to
provide high performance lighting. This lamp has gained the reputation for
being one of the most successful rally lamps of all time. The body is made
from a high thermal absorption steel with a epoxy powder black finish. The
lens is of high resistance glass and the reflector is a vacuum aluminised
silicone coated parabola.
high performance halogen light
3 way fixing pivot
H1 bulb / 12v or 24v
versatile fitting above and below car bumpers
robust construction to provide long life performance
BA 3022 Cibie Super Oscar Driving Lamp*
BA 3022S Cibie Super Oscar Spot Lamp*
BA 3022F Cibie Super Oscar Fog Lamp*
BA 3035
BA 3035
8" round, black metal
case – 55w - sold as a
pair
BA 3035S
8" round, stainless steel
case – 55w - sold as a
pair
CIBIE OSCAR+
BA 3035S
BA 3026
RING DRIVING
LAMP KITS
These tough top quality
lamps are amongst the
best available. Complete
with removable white
plastic covers, these
lamps give extra lighting
when required.
BA 3026
180mm driving lamp
- sold as a pair
BA 3026A
220mm driving lamp
- sold as a pair
The CIBIE OSCAR+ is a circular additional lamp designed to be fitted to
vehicles with limited access.
Construction is as described for the Super Oscar above
high performance with a slim profile
2 way fixing pivot
H2 bulb / 12v
versatile fitting above and below car bumpers
robust construction to provide long life performance
BA 3020 Cibie Oscar+ Driving Lamp*
BA 3020S Cibie Oscar+ Spot Lamp*
BA 3020F Cibie Oscar+ Fog Lamp*
*Sold as single units
REPLACEMENT
BULB KITS
All vehicles should have one –
especially if you plan travelling in
Europe. This emergency kit contains
at least one of each; Headlamp,
Brake Light, Indicator and Interior
Light Bulbs as well as a selection of
Fuses.
BR 1300
Emergency Replacement Bulb Kit
SPOT LAMP FITTING KIT
BA 3026A
to order – contact official stockists
A Universal fitting kit suitable for all spot lamps, including those illustrated on this page. Includes
switches, wires, relays and instructions. From “RING” – does not include spot lamps.
BA 3026K – Spot Lamp Fitting Kit
www.bearmach.com
141
driving lamps
55w HEAVY DUTY OFFROAD DRIVING LAMPS
OFF-ROAD
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
LED BULBS
For use with most modern clear light
covers
BA 5122 – RED LED Stop and Tail
BA 5123 – RED LED 21W
BA 5124 – RED LED 5W
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
STANDARD COLOURED
BULBS
BA
BA
BA
BR
5125 – Red Bulb (STD) 21W
5126 – Red Bulb Stop/Tail
5128 – Red Bulb 5W
1303A – Amber Bulb (180
Degree Pins)
lighting & electrical
OPTIMA BATTERIES
XENON BULB KIT
These batteries offer many advantages over conventional batteries. They use
Optima’s revolutionary SpiralCell technology which involves thin plates of
lead being rolled into spiral-shaped cells instead of hanging straight down.
This increases the lead electrode surface by up to 100% allowing more
efficient chemical reaction with the acid. The acid is absorbed in a specially
designed separation material of thin fibreglass floss which has a positive
effect between the active materials.
Advantages:
Sealed for life
Air portable
Lasts 3 times as long as a “Good Brand” battery
Has twice the starting power of a normal battery
Can be stored for up to 2 years without power loss
Tolerates hard driving on rough terrain and is vibration safe
Flexible positioning
Upgrade your standard lights for a crystal clear vision at night. Directly
replaces existing bulbs, but some cutting of bulb covers may be necessary.
Wiring instructions included.
BA 3120 – Red Top. General use.
BA 3121 – Yellow Top. Winch Battery 2nd battery on split charge system.
BATTERY
ISOLATOR
SWITCH
BA 5120 – Xenon Bulb Kit H1
BA 5121 – Xenon Bulb Kit H4
Easily fitted, allows
battery to be isolated.
Features a removable key
for extra security.
BA 130 – Battery
Isolator Switch
BA 130
BA 130S – Battery
Isolator Switch with
silver terminals
SEAT HEATER
Seat Heater available built-in to
new seats or DIY kit to fit inside
your seats. With full fitting
instructions wiring loom and
switches. Sold for pairs of seats
only.
CLINOMETER
An invaluable tool to have in
your Land Rover to measure the pitch
and roll of the terrain. It is an independent
twin meter, with manual tabs to set your danger limits and it can
beilluminated to make it easy to see at night. Easy to fit and mount in a
convenient position on the dashboard.
BA 5560 – Clinometer
142
www.bearmach.com
BA 2410
Heater (pair)
BA 2410
to order – contact official stockists
B OOSTER C ABLES
BA 5100
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
P ORTABLE P OWER
AGRICULTURAL,
COMMERCIAL &
HGV BOOSTER
CABLES
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Fully insulated heavy duty
clamps for additional safety
supplied in a protective
nylon bag, suitable for LGV
and Commercial use.
Cross section area of cable
is 35mm2, cable length is
4.5m.
BA 5100 – Agricultural,
Commercial & HGV
Booster Cables
BA 5101
HEAVY DUTY POWERPACK
BA 5102
The ultimate camping and recreational companion, that includes an integral
300w inverter and 250psi air compressor complete with adapters. The
powerpack has a high power and long life battery, automatic power shut off
on clamp release, 2 x DC auxiliary power outlets, in-vehicle charging
adapter, adapter for 240v charging.
BA 5101 – Heavy Duty Powerpack
The Heavy Duty PowerPack is a
professional application with a high
power, long-life battery, automatic
power shut off on clamp release, 2 x
DC auxiliary power outlets, built-in
work lamp, in vehicle charger adapter,
adapter for 240v charging, extra long high specification cables, LED charging
and battery status indicator.
POWERSOURCE PLUS 500
500w (800 peak). The PowerSource Plus 500 is an ideal leisure accessory –
plug into you car battery to give a 240volt output. It is safe to use on DVD
players, lighting (not fluorescent), mobile phone chargers, electronic note
pads, videos, computer consoles, laptop computers, camcorders, stereos,
small fridges, medium power tools and colour televisions.
BA 5103
BA 5102 – PowerSource Plus 500
BA 5103 – Heavy Duty Powerpack
POWER INVERTER
No car should be without one – a conveniently sized inverter which
simply plugs into the cigar lighter of your vehicle and converts the
12volts DC to 240v AC household electrical power. You can operate
mobile office equipment and household appliances up to 6amps from
your car, van, motorhome or boat. Run your mobile phone charger,
laptop computer, playstation, camera charger, portable lights. Will
not run heating appliances
like irons and kettles.
BA 5113
• Auto shutdown to protect
against overload, short
circuit or overheating
• Flexible elbow
• LED light to indicate
operation
• Compact and
lightweight, easily
stored in glovebox
BA 5113 “Miniverter” 240v Power
Inverter
to order – contact official stockists
www.bearmach.com
143
portable power
HEAVY DUTY POWERPACK
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SMART CHARGERS
RING Smart-Chargers use ‘Plug and play’ technology to charge
most types of lead acid batteries. They can recover damaged or
deeply discharged batteries and deliver a battery back to its
optimum peformance.
Smart features:
• Automatic 3 stage battery charger
• Battery reconditioning
• Rapid charge override
• Remote battery check
• Suitable for all battery types.
12V MULTI SOCKETS
In this age of hi-tech car accessories
and their increasing popularity, the
demands on a vehicle’s
power resources
are becoming
increasingly
stretched. With
the use of Sat
Nav, radar
detectors, DVD
players and
mobile phones and
only one 12v socket
available - you can be
left wanting more.
The new RING Multi-socket range has been created to meet this
demand - with superior quality, design and functionality to
compliment the high value devices which are plugged into them.
Both models here have an LED guide light and adjusting fitment
collar.
BA 5114 Twin 12v Multi-Socket with 0° to 90° 4 position
adjustable plug.
BA 5115 Twin 12v Multi-Socket with Battery Analyser. Mounting
arms and coiled cable with plug attached.
portable power
BA 5116 Smart-Charge 4. An easy to use, waterproof charger
supplied with fully insulated power connectors and battery terminal
connectors.
T-MAX AUXILIARY BATTERY SYSTEM
BA5117 Smart-Charge 16. A
professional quality charger with
increased 16 amp charging capacity,
automatic battery recondition function and polarity check. Supplied
with tangle-free leads which store conveniently within the charger.
With all the demands put on the battery of a serious off-road
vehicle, an auxiliary battery is a sensible accessory. To run that
battery you will need a Split Charge System. The T-Max dual battery
system automatically links two batteries for charging, but isolates
them when discharging. It has a manual over-ride feature, and built
in safety protection. The system is a 12 volt system with a 180A
Load capacity. Kit includes solenoid, display unit all necessary wiring
and connnectors and full instructions.
BA 2685 Auxiliary Battery System
144
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
COOLMATIC CF-18
K EEPING I T C OOL
A truly portable cooler/freezer fitted
with a Danfoss compressor to
give exceptional cooling
performance. Features
detachable lid, interior light,
sturdy carrying handle and
internal divider.
To call this range “cooler boxes” is doing them a disservice – this is “Mobile Refrigeration” at its best.
These products bring a new convenience to the mobile,
outdoor enthusiast - with advanced features for keeping
all your food and drink cool and fresh.
Capacity:
18 Litres
Voltage:
12v/24v DC
Consumption: 35 watts
Temp Range: –18°C to +10°C
Weight: 11.5kgs
Size:
L465 x W300 x H414mm
TROPICOOL
This in-car coolbox features LED indicators for temperature, battery monitor,
safety belt fixing, switches for cold or warm functions, fold up tray, serves as
an armrest for comfort when fitted to back seat.
Capacity:
15 Litres
Voltage:
12v DC
Consumption: 54 watts
Temp Range: –20° to +65°
Weight:
5.2kgs
Size: L358 x W282 x H328mm
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 3213
Coolmatic CF-18
BA 3213
COOLMATIC CF-35
Can be used almost anywhere in the
world - the integrated power supply unit
identifies the voltage and adjusts itself
accordingly. Mounting kit available for
safe fixing in a vehicle. The Danfoss
compressor gives exceptional
performance for cooling or freezing.
BA 3210
Tropicool Bord-Bar
Capacity:
Voltage:
Consumption:
Temp Range:
Weight:
Size:
BA 3210
BA 3214
31 Litres
12v/24v DC and 110-240v AC
45 watts
–18°C to +10°C
15kgs
L580 x W360 x H385mm
BA 3214
Coolmatic CF-35
TROPICOOL FRESHBAG
This box features soft textile outer
with shoulder strap and roller
shutter closure; 3 exterior pockets.
Deep enough to take 3 x 2 litre
bottles.
BA 3211
Similar to the Coolmatic CF-35 but with an enormous 49 litre capacity.
Features detachable lid, interior light and removable wire basket.
Capacity:
Voltage:
Consumption:
Temp Range:
Weight:
Size:
14 Litres
12v DC
36 watts
–20°C below ambient temp
L420 x W250 x H395mm
4.6kgs
Tropicool Freshbag
BA 3211
BA 3215
49 Litres
12v/24v DC and 110-240v AC
45 watts
–18°C to +10°C
18kgs
L630 x W360 x H480mm
Coolmatic CF-50
TROPICOOL CLASSIC
This box is large enough for a long car
journey or family picnic and features 7
stage electronic thermostat with LED
indicators,integrated mains supply,
detachable lid with magnetic lock,
internal divider.
Capacity:
Voltage:
Consumption:
Temp Range:
Weight:
Size:
BA 3212
21 Litres
12v/24v DC or 12/230v DC/AC
60-70 watts
30°C below ambient temp
6kgs
L450 x W303 x H420mm
Tropicool Classic
to order – contact official stockists
BA 3215
BA 3212
www.bearmach.com
145
electrical / cooling
Capacity:
Voltage:
Consumption:
Temp Range:
Size:
Weight:
COOLMATIC CF-50
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
1:18 SCALE REPLICA MODELS
We at Bearmach are pleased to be able to offer this
wonderful selection of replica models. They are correct in all
details and have many working parts: the doors open, wheels
turn, seats fold; even the engine bay and underside of the
body carry detail few model makers achieve. Each model is a
true replica which has been accurately scaled down (1:18) by
modelling technicians. The bodywork is die-cast metal and
and all ancillary parts (up to 150 pieces in each model) are
hand assembled by skilled specialists. Models are supplied on
an attractive plastic display base and we are sure these
models will get pride-of-place in any collection.
BAG 869
BAG 868
BAG 874
BAG 891
BAG 877A
BAG 886
BAG 867
toys / models
LAND ROVER 1:18 SCALE REPLICA MODELS
BAG 889
Colours may vary to those shown
146
– Range Rover L322, Silver/Green
– Defender 90 TD5 Station Wagon, Silver
– Defender 90 in Royal Mail Livery
– Defender 90 Hard Top Van, Royal Blue
– Defender 110, Double Crew Cab, Green
– Range Rover (P38 model), in silver
– Range Rover (P38 model), in black
– Defender 110, Station Wagon, Red/White roof
– Freelander Soft Top, Silver (Illustration A at top of
next page)
BAG877A – Freelander 5 door V6. Metallic Vienna Green
BAG867
BAG868
BAG869
BAG874
BAG886
BAG889
BAG890
BAG891
BAG877
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
BAG 877
A
BAG 861
B
C
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BAG 870
D
BAG 860
H
E
BAG 863
J
BAG 864
BAG 893
BAG 894
BAG 892
Colours may vary to those shown
BAG 865P
G
We are
updatin constantly
go
of mod ur range
Rovers el L and
one of . Call into
our
see late shops to
st stoc
k
DIE CAST MODELS 1:18 SCALE
A. BAG877
Freelander Soft Top. Silver.
H. BAG892
Defender 110 Station Wagon. G4 Edition
G. BAG894
Defender 90 G4 (Ltd Edition)
J. BAG893
Defender 90 Hong Kong Police
RADIO CONTROLLED LAND
ROVER SETS
RADIO CONTROLLED LAND ROVERS
Robustly built radio controlled Land Rovers. Highly detailed at a 1:10 scale and guaranteed to give
hours of fun to kids of all ages. With 2 speed gear box, 4WD, working lights, horn and engine noises.
BAG865P – Defender 90 in Police livery
to order – contact official stockists
These radio controlled Land Rovers are built to a
smaller scale than the range above and each
vehicle is approx 70mm long. They are complete
with cones to make your own obstacle course.
Forward and reverse gears.
BAG899 – Defender 90 R/C Car in silver
BAG900 – Discovery 3 R/C Car in silver
BAG901– Freelander R/C Car in silver.
www.bearmach.com
147
toys / models
F
DIE CAST MODELS 1:32 SCALE
B. BAG870
Freelander 5 Door. Green (2004)
C. BAG861
Series 1. Bronze/Green
D. BAG860
Discovery II. Epsom Green.
E. BAG863
Defender (X-TECH). Silver Model
F. BAG864
Discovery 3. Silver
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
GIANT REMOTE CONTROL CAR
This very impressive model is truly a “big-boy’s-toy” at nearly 500mm long.
This replica is based on a SSK Merecedes is in a hi-gloss black with gold
coloured accessories. It features an MP3 player under the bonnet with music
and engine sounds, working lights including disco style light from the spare
wheel. All features - including opening “dickie seat” - are operated from the
remote control.
BAG904 – Giant Remote Controlled car
METAL SIGNS
These signs are faithful reproductions of metal enamel
signs you'd find on any garage wall in years gone by.
Each is 123cm x 456cms and is drilled ready for
fixing.
toys & 4x4 gifts
BAG850
BAG851
BAG852
BAG853
BAG854
BAG855
–
–
–
–
–
–
Printed
Printed
Printed
Printed
Printed
Printed
Metal
Metal
Metal
Metal
Metal
Metal
Sign
Sign
Sign
Sign
Sign
Sign
–
–
–
–
–
–
Defender 90
Series 1
Range Rover Classic
Triumph Bike
VW Camper
J Deere Tractor
Chrome GB Letters
Chrome Union Jack
Chromed alloy GB letters. Self adhesive, screwless
fixing. each letter is approx 84 x 53mm.
A rendition of of the union flag in chrome and the
colour of the car. Self adhesive fixing. Made from
plastichrome it measures 98 x 55mm.
BA 5161 – GB letters - raised chrome
BA 5162 – Union Jack - raised chrome
148
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
RESIN MODEL LAND ROVERS ON PLINTHS
BAG881
LAND ROVER ON PLINTH WITH PERSPEX PHOTO HOLDER
LAND ROVER MUGS
Attractive mugs decorated
with a colour illustration of
the Land Rover of your
choice and the Land Rover
logo on the inside.
All individually boxed
BAG871
BAG876
BAG878
BAG875
–
–
–
–
DISCO
DEFENDER
FREELANDER
SERIES 1
Reverse of Mug
BAG883
LAND ROVER
KEYRING
BAG882
MODEL/CLOCK
Gold plated brass model with quartz clock set in door.
Size: 9 x 4 x 4.5cms
Keyring with an attached
deep etched illustration
of a Land Rover
manufactured in pewter.
BA 7501
UNION JACK BADGES
Fly the Flag and show where your Landy is built with these self adhesive
enamelled badges. Supplied as a pair.
to order – contact official stockists
This fabulous scale model of a Discovery is a Limited Edition of 300 units
and comes with a numbered certificate of authenticity. The model is in solid
glass crystal with the interior detail cleverly enhanced with a softly etched
surface.
Mounted on a mahogany base.
Size: 19 x 9 x 9.5cms
www.bearmach.com
149
4x4 gifts
BAG884 CRYSTAL DISCOVERY
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 3041
BEARMACH
SWEAT SHIRT
BA 3044
BEARMACH CAP
A quality cotton baseball cap
with blue peak and embroidered
BM logo.
Heavyweight cotton
for total comfort
and durability. With
embroidered BM
logo. Navy Blue.
50% Cotton 50%
Polyester.
One size.
clothing & DVDs
Available in sizes:
M, L, XL
BA 3046
BEARMACH
FLEECE
High quality fleece
jacket from Regatta.
Full length zip and
two zipped pockets.
Drawcord at the
waist and
elasticated cuffs.
Embroidered BM
logo on left chest.
Navy Blue. 100%
Polyester. Available
in sizes: M, L, XL
BA 3042
BEARMACH
POLO SHIRTS
Traditional short
sleeved polo shirt
with embroidered
BM logo. Navy
Blue. 35% Cotton
65% Polyester.
DVD S
BEARMACH intend to stock a great library of DVDs to entertain you when
you’re not Off-Roading so look for future additions - meanwhile here's a few
to be going on with.
BA 3114 – Camel Trophy 89-98 – The Land Rover Years, combines a
decade of great adventure, skillful 4WD action and stunning scenery.
BA 3115 – 4WD Off Road – We travelled the world looking for the most
unusual off-roaders around. We found plenty!
BA 3116 – Hammer Down 4WD – Includes footage of the Vernal, Utah
UROC event, Cat Canyon, and Desert Mountain with drivers like Rick
Wretberg and the legendary Lee Mattingly.
BA 3117 – Hammer Down 4WD – II – Thor Wixom introduces us to more
competition footage, more roll-overs and more ‘Hammering Down’. The best
driving and worst carnage, extreme rock-crawling has to offer.
Available in sizes:
M, L, XL
BA 3043
BEARMACH
‘T’ SHIRTS
A quality cotton ‘T’
shirt with printed
BM logo. Navy
Blue. 100% Cotton
Available in sizes:
M, L, XL
150
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
TECHNICAL PUBLICATIONS ON CD
This exciting new range of Land Rover original
technical publications on CD Rom is the ultimate
source of information for your favourite Land
Rover.
Each CD focuses on one model and includes the
original parts catalogues, workshop manual and
driver’s handbook all reproduced in an easy-to-use
PDF format. As appropriate to certain models,
additional publications detailing special
equipment are also included.
Also included are details of the Land Rover
Classic Parts Programme, the Heritage Motor
Centre and British Motor Industry Heritage Trust,
Land Rover History Notes and other useful
information on relevant car clubs and enthusiast’s
organisations. PDF reader software is included if
required.
Minimum system requirements: Windows 2000 •
Intel Pentium III or equivalent • 128Mb Ram •
Adobe Acrobat Reader (not suitable for Macintosh
systems)
Ref
Vehicle
LHP19
LHP20
LHP21
LHP22
LHP24
LHP23
LHP25
LHP26
LHP27
LHP28
LHP3
LHP32
LHP33
LHP1
LHP2
LHP29
Series 1 Land Rover 48-58
Series 2 Land Rover 58-61
Series 2A & 2B Land Rover 61-71
Series 3 Land Rover 71-85
Land Rover 101 Forward Control
88 Half Ton Military - 68-84
90, 110, Defender & XD Military 84-99
90, 110, & 127 Defender - 83-89
Defender 90, 110 & 130 - 90-98
Defender 90 & 110 N.America - 93-97
Discovery 1 - 89-94
Discovery Series 1 - 94-98
Discovery 1 N.America - 94-98
Range Rover Classic 72-85
Range Rover Classic 86-92
Range Rover Classic - N.America 87-95
manuals
Parts catalogue, Workshop Manuals and
Owner’s Literature all on one PC CD Rom
WORKSHOP MANUALS
BEARMACH are able to supply a great range of useful books for Land
Rover owners including original workshop manuals, extensive Parts
catalogues and general interest – If your requirement is not listed here,
please contact us as we are sure we'll be able to help.
Series Vehicles
BA 3087
606407
AKM3648
RTC9120B
BA 3029
BA 3029P
Series 1 Workshop Manual O.E. 48-58
Series 2 & 2A Workshop Manual O.E. Parts 1 & 2
Series 3 Workshop Manual O.E
101 Forward Control Workshop Manual
Series 2A & 3 Diesel HAYNES Workshop Manual
Series 2A & 3 Petrol HAYNES Workshop Manual
Defender
BA 3089
SLR621EM
BA 3084
BA 3064
VDR100250
BA 3027
BA 3250
BA 3251
90/110 HAYNES Workshop Manual
90/110 to 93 MY Workshop Manual O.E
DEFENDER '93-'95 Workshop Manual
DEFENDER '96-'98 Inc 300TDi & Gearbox
Workshop Manual O.E.
DEFENDER '99 on Workshop Manual O.E.
90/110 Owners Manual O.E.
Workshop Manual for Def TD5 ’99-05
Electrical Manual for Def TD5 ’99-05 and 300TDi 02-05.
Discovery
SJR900EN
BA 3065
BA 3031
VDR10009
BA 3063
BA 3054
DISCOVERY up to 94 Workshop Manual O.E.
DISCO '95-'98 Inc 300TDi & Gearbox Workshop Manual O.E.
DISCO HAYNES Workshop Manual
DISCO 2 Workshop Manual O.E.
300TDi Engine & Gearbox Workshop Manual
V8 Engine & Gearbox Workshop Manual
Range Rover
AKM3630
LSM18OWM
BA 3077
BA 3088
VDR10037
BA 3068
RANGE ROVER CLASSIC '70-'85 Workshop Manual O.E.
RANGE ROVER '86–'89 Workshop Manual O.E.
RANGE ROVER Classic ('90–'94) Workshop Manual
RANGE ROVER HAYNES Manual
RANGE ROVER P38 Workshop Manual O.E.
RANGE ROVER Classic Workshop Manual
Freelander
LRL0144E
BA 3085
to order – contact official stockists
FREELANDER to 2001 Workshop Manual O.E.
FREELANDER HAYNES Workshop Manual
www.bearmach.com
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
151
accessories
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BOOKS
BEARMACH are able to supply a great range of useful books for
Land Rover owners including original workshop manuals, extensive
Parts catalogues and general interest – If your requirement is not
listed here, please contact us as we are sure we'll be able to help.
PARTS CATALOGUES
Series Vehicles
BA 3066
BA 3067
605957
RTC9840C
BA 3069
RTC9841C
BA 3086
608294B
Series 1 '48-'53 Parts Catalogue O.E.
Series 1 '54-'58 Parts Catalogue O.E.
Series 2 & 2A Parts Catalogue O.E.
Series 2A Parts Catalogue O.E.
Series 2A & 3 Optional Parts Catalogue O.E.
Series 3 Parts Catalogue O.E.
Series 3 Lightweight Parts Catalogue
101 Parts Catalogue
BA 3067
BA 3066
books & manuals
Defender
RTC9863C
STC9021CC
110 Parts Catalogue up to '86 O.E.
90/110 DEFENDER Parts Catalogue O.E.
Discovery
RTC9947C
STC9049CB
DISCO 89-98
DISCO 2
Range Rover
RTC9846C
RTC9908C
BA 3073
RTC9970CE
RANGE ROVER Parts Catalogue up to '85 O.E.
RANGE ROVER '86-'92 Parts Catalogue O.E.
RANGE ROVER '92–'94 Parts Catalogue
NEW RANGE ROVER O.E.
Freelander
STC9046CB
RTC9841
RTC9863
FREELANDER up to 2000
SPECIAL INTEREST
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
BA
3028
3062
3030
3061
3082
3083
3103
3105
3109
3021
3081
3072
3112
3113
WORKING IN THE WILD
WINCHING IN SAFETY
LAND ROVER THE UNBEATABLE 4X4
ROVER V8 ENGINE HISTORY
LAND ROVER IN MILITARY SERVICE
LAND ROVER PRACTICAL CLASSICS
OFFROAD & 4 WHEEL DRIVE
TUNING ROVER V8
LAND ROVER SIMPLY THE BEST
DISCOVERY PERFORMANCE '89–'00
YOU AND YOUR DISCOVERY
FIT FOR MOTORSPORT
YOU AND YOUR FREELANDER
YOU AND YOUR RANGE ROVER (P38)
BA 3062
RESTORATION
BA
BA
BA
BA
BA
BA
3060
3104
3108
3070
3071
3119
LAND ROVER GUIDE PURCHASE & RESTORATION
RANGE ROVER RESTORATION GUIDE
LAND ROVER DEFENDER RESTORATION
RANGE ROVER RESTORATION MANUAL
DISCOVERY 1 RESTORATION MANUAL
DISCOVERY EXTREME Manual
RTC9838
152
BA 3105
BA 3028
Working in the Wild
Land Rover's Manual for Africa
This paperback guide is designed to
equip Land Rover users with the
practical know-how to make the
most of the vehicle's capacity for
hard work in hostile conditions.
Winching in Safety
The Land Rover Directory
Describes the various types of winch
approved for fitting to Land Rovers
with clear instructions on how to use
them safely. Paperback.
BA 3103
www.bearmach.com
to order – contact official stockists
BEARMACH
OFF-ROAD
GIFTS&ESSENTIALS
HAYNES RESTORATION MANUALS
(Range Rover / Land Rover series / Defender)
These manuals go a step further from their well
renowned service manuals with advice on
renovating bodywork and chassis, replacing
interiors, overhauling electrics and improving
performance - as well as advice on the pitfalls of
buying a vehicle for restoration.
BA 3108
BA 3081
BA 3119
YOU AND YOUR…
(Range Rover / Freelander / Discovery)
This range of books looks at the evolution of the
vehicles and offers excellent advice on buying,
enjoying, maintaining and modifying your
favourite vehicle.
BA 3070
BA 3112
BA 3113
FIT FOR MOTORSPORT
Clearly written and illustarted this book will help
get you to Peak fitness for that competitive edge
in . top motorsport. Recommended by Jimmy
McRae - 5 times British Rally Champion.
LAND ROVER RESTORATION
A handy paperback guide on DIY restoration
covering everything you'll need to restore a Series
1 Land Rover.
BA 3109
BA 3072
BA 3083
HAYNES LAND ROVER
A celebration of the world's most successful family
off-road vehicles. Martin Hodder tells the
fascinating inside story of the development of the
marque since 1948.
TRADERS SALES AIDS
For display purposes in retail outlets and shops, Bearmach offer a
range of stands for Parts and Accessories. This initial range
accommodates our range of winches and accessories, other
products will be covered in the near future. This is aimed at our
trade market, please contact your representative for pricing and
futher developments.
BEARMACH
Display Stand
A heavy duty stand
finished in black and
chequer plate shelf.
Can display a variety
of Bearmach products
including Side Steps
and Rock Sliders.
Many products can be
easily fixed to the
weldmesh grid.
Size: 2m high x 3m
wide
BA 5025 – Trade
Display Stands
to order – contact official stockists
T-Max Banner
Brightly coloured printed vinyl
banner with eyelets to fix in position.
Size: 90 x 180cms
BA 2642 – T-Max Banner
T-Max Merchandiser
Internal shop display with full colour
printed header panel. Sturdily
constructed display stand to take two
winches.
BA 2637 – T-Max Merchandiser
www.bearmach.com
153
sales aids
BA 3060
accessories
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd