light industrial brochure_F12pg.indd

WELDMATIC
LIGHT INDUSTRIAL MIG WELDERS
Welding without compromise
Finely tuned to give you smooth,
high performance welds
Suited to single phase power
Made in Australia
www.welding.com.au
At WIA, we are serious about product quality.
Every new Weldmatic machine comes fully backed by
the WIA Gold Shield 3 Year Warranty, covering parts
and workmanship, so you can be guaranteed you’re
buying reliability and performance.
Weldmatic machines* are WIA backed, Australian
made and supported by an Australia wide local service
network giving you peace of mind.
*Gun cables and gas regulators are covered by the relevant manufacturers’ warranty.
WIA backed. Australian made. Local support.
Weldmatic Selection Chart
Model
Thickness of
metal fillet
welded in a
single pass
Wire size range
Gas/
Gasless
Wire spool Applications
sizes
Primary plug
required for
max output &
duty cycle
Circuit breaker
required for
max output
& duty cycle
Generator
required
for max
output
Output
rating
150
Weldmatic
0.6 - 0.9mm solid Yes
0.8 - 1.2mm cored
1 & 5 kg
Home workshop,
light industry,
rural & hire fleets
15A
240 Vac
20A
6.7kVA
135A,
20.8V,
25% duty
175
Weldmatic
0.6 - 0.9mm solid Yes
0.8 - 1.2mm cored
1 & 5 kg
Home workshop,
15A
trades, light industry, 240 Vac
rural & hire fleets
20A
7.2kVA
175A,
22.8V,
16% duty
8mm
Weldmatic
0.6 - 1.0mm solid Yes
0.8 - 1.2mm cored
5 & 15 kg
Crash repairs,
exhaust shops &
light tube structures
15A
240 Vac
20A
7.5kVA
175A,
22.8V,
20% duty
10mm
Weldmatic
0.6 - 1.0mm solid Yes
0.8 - 1.2mm cored
5 & 15 kg
Light industry, crash
repairers, rural
workshop, schools &
colleges
20A
240 Vac
25A
9.5kVA
200A,
24V,
20% duty
255
Weldmatic
0.6 - 1.2mm solid Yes
0.8 - 1.2mm cored
5 & 15 kg
Light to medium
fabrication,
maintenance, rural
workshops, hire
fleets & body
25A
240 Vac
32A or 40A
12.0kVA
12A
480 Vac
20A
Application
dependant
255A,
27V,
25% duty
WELDMATIC 150
PORTABLE &
POWERFUL
Part no. CP115-0
Portable and powerful – the
Weldmatic 150 is the ideal choice for
home, trades, light industrial, rural
and hire applications.
Gas or Gasless Suited to both gas
shielded and gasless (self-shielding)
wires, with quick and easy polarity
reversal.
Precise Welding Control includes
9 voltage settings and weld setting
chart for easy set up and fine tuning
of the machine.
Spool Capacity 1kg and 5kg.
Industrial Strength Fitted with an
industrial standard 3 metre Bernard
gun cable for reliable welding
performance and long operating life.
Lifting Safety comes with twin
rubber handles for both comfort
and safety.
Fillet weld up to 6mm steel,
stainless steel & aluminium
in a single pass.
The Weldmatic 150 is a truly portable welder. Light enough to lift into
the back of the ute and take anywhere. Shown with optional trolley.
Primary
Voltage
Rated
Primary
Current
Maximum
Primary
Current
Recommended
generator kVA
Supply Plug Rated Output @ 40oC
Duty cycle based on
5 minute cycle time
240 Vac,
50/60 Hz
12 Amps
28 Amps
6.7 kVA
15 Amp
Welding Current
Range
135 Amp, 20.8 V, 25% duty 35 - 150 Amps
67 Amp, 18 V, 100% duty
Wire Size Range
Shipping
Weight
0.6 - 0.9 mm solid
0.8 - 1.2 mm cored
38 Kg
WELDMATIC 175
Part no. CP116-1
Genuine 175 amps of pure welding
grunt in a compact unit. This compact
MIG out-guns some of the big boys,
but is easily transported in the boot
of a car. The 175 is a good choice
for home workshops, trades, light
industry, rural and hire fleets.
Precise Welding Control includes
9 voltage settings and weld setting
chart for easy set up and fine tuning
of the machine.
Convenience The 175 comes
complete with a convenient trolley
cart and accessory tray and accepts
gas cylinders up to E size.
Industrial Strength Fitted with an
industrial standard 3 metre Bernard
gun cable for reliable welding
performance and long operating life.
Gas Or Gasless Suited to both gas
shielded and gasless (self-shielding)
wires, with quick and easy polarity
reversal.
Spool Capacity 1kg and 5kg.
Lifting Safety comes with twin rubber
handles for both comfort and safety.
The Weldmatic 175 is light
weight & portable. Machine
comes complete with trolley
& leads.
Primary
Voltage
Rated
Primary
Current
Maximum
Primary
Current
Recommended
generator kVA
Supply Plug Rated Output @ 40oC
Duty cycle based on
5 minute cycle time
Welding Current
Range
Wire Size Range
Shipping
Weight
240 Vac,
50/60 Hz
12 Amps
30 Amps
7.2 kVA
15 Amp
35 - 175 Amps
0.6 - 0.9 mm solid
0.8 - 1.2 mm cored
45 Kg
175 Amp, 22.8 V, 16% duty
67 Amp, 18 V, 100% duty
WELDMATIC 8mm
Part no. CP118-0
For welding sheetmetal, exhaust and
other light tubing, the Weldmatic
8mm has you covered. Plus, with a
top end capacity to fillet weld up to
8mm of steel, stainless or aluminium
in a single pass – this MIG has what it
takes to get the job done.
The Weldmatic 8mm is
easy to use and manoeuvre
around any workshop.
Unique ‘Arcstart’ Control allows
starting conditions to be fine-tuned
from ‘Soft Start’ through to ‘Fast’
to suit the welding application. The
‘Smooth’ arc characteristic makes it
easy to weld thin materials without
burn-through. Use with silicon bronze
wire for low distortion joints which
Primary
Voltage
Rated
Primary
Current
Maximum
Primary
Current
Recommended
generator kVA
Supply Plug Rated Output @ 40oC
Duty cycle based on
10 minute cycle time
240 Vac,
50/60 Hz
15 Amps
31 Amps
7.5 kVA
15 Amp
Welding Current
Range
175 Amp, 22.8 V, 20% duty 30 - 200 Amps
80 Amp, 18 V, 100% duty
are easily dressed and finished.
Fan on Demand uses less power and
generates less noise by only running
when needed.
Suits 15 Amp Power Outlet just
plug in and start welding.
Spool Capacity handles either 5kg or
15kg spools for more flexibility.
Industrial Strength Fitted with an
industrial standard 3 metre Bernard
gun cable for reliable
welding performance and
long operating life.
Wire Size Range
Shipping
Weight
0.6 - 1.0 mm solid
0.8 - 1.2 mm cored
72 Kg
REAL ARC POWER
WELDMATIC 10mm
Part no. CP119-0
Power & Control. Need a MIG
WELDER that offers the best of both
worlds? Then the 10mm is the one
for you. It delivers a smooth, easily
controlled arc right across the range.
As the name suggests it fillet welds
up to 10mm of steel, stainless or
aluminium in a single pass.
Now that’s real ARC POWER!
The all new 10mm MIG is the ideal
‘all-rounder’ for rural workshops,
light manufacturing and colleges
and schools.
Compact Design uses minimum
floorspace and suits underbench
installation.
Unique ‘Arcstart’ Control allows
starting conditions to be fine-tuned
from ‘Soft Start’ through to ‘Fast’
to suit the welding application. The
‘Smooth’ arc characteristic makes it
easy to weld thin materials without
burn-through. Use with silicon bronze
wire for low distortion joints which
are easily dressed and finished.
Fan on Demand uses less power and
generates less noise by only running
when needed.
Spool Capacity handles either 5kg
or 15kg spools for more flexibility.
Industrial Strength Fitted
with an industrial standard
3 metre Bernard gun
cable for reliable welding
performance and long
operating life.
“The 10mm handles both the light
and heavy jobs. It performs well with
silicon bronze, a requirement for some
insurance work - and being made
locally is certainly an advantage.”
Kevin Mullen M.E. Dale Crash Repairs
Primary
Voltage
Rated
Primary
Current
Maximum
Primary
Current
Recommended
generator kVA
Supply Plug Rated Output @ 40oC
Duty cycle based on
10 minute cycle time
Welding Current
Range
Wire Size Range
Shipping
Weight
240 Vac,
50/60 Hz
18 Amps
38 Amps
9.5 kVA
15 Amp*
35 - 225 Amps
0.6 - 1.0 mm solid
0.8 - 1.2 mm cored
75 Kg
*Shipped with a 15Amp plug fitted for initial commissioning only.
200 Amp, 24 V, 20% duty
90 Amp, 19.5 V, 100% duty
WELDMATIC 255
Part no. CP112-1 (240 volt) CP112-3 (480 volt)
The 255 amp single phase MIG
heavy weight comes with a history
of reliable and exceptional welding
performance across applications
ranging from light to medium
fabrication to farm maintenance,
including hard surfacing.
the operator. Fine tune the welding
parameters at the job without having
to return to the machine.
Precise Welding Control continuous
“stepless” fine voltage control
enables fine tuning of weld settings.
Fold Out Gun & Cable Holder
provides a safe storage place for the
welding gun, interconnecting leads
and primary supply cable when not
in use.
Convenience Fine adjustment
controls are mounted on the portable
wire feeder and within easy reach of
Composite Cable Interconnecting
Leads One piece 8m cable for
convenience, improved workplace
safety and extended cable life.
Industrial Strength
Fitted with an industrial
standard 3.6 metre Bernard
gun cable for reliable welding
performance and long
operating life.
Gas or Gasless Suited
to both gas shielded and
gasless (self-shielding)
wires, with quick and
easy polarity reversal.
The Weldmatic
255 is also available
in a 480 volt supply model.
Spool Capacity 5kg and 15kg.
Primary
Voltage
Rated
Primary
Current
Maximum
Primary
Current
Recommended
generator kVA
Supply Plug Rated Output @ 40oC
Duty cycle based on
10 minute cycle time
Welding Current
Range
Wire Size Range
Shipping
Weight
240 Vac,
50/60 Hz
480 Vac,
50/60 Hz
25 Amps
49 Amps
12 kVA
15 Amp*
30 - 255 Amps
104 Kg
12 Amps
25 Amps
12 kVA
0.6 - 1.2 mm solid
0.8 - 1.2 mm cored
0.6 - 1.2 mm solid
0.8 - 1.2 mm cored
*Shipped with a 15Amp plug fitted for initial commissioning only.
255 Amp, 27 V, 25% duty
100 Amp, 19 V, 100% duty
255 Amp, 27 V, 25% duty
100 Amp, 19 V, 100% duty
30 - 255 Amps
104 Kg
HELPFUL HINTS
Safety essentials
for MIG welding
WIA recommend Fabshield self
shielding MIG wire for use with
Weldmatic machines. It is an
economical option for those windy
outdoor conditions where gas bottles
can be inconvenient and costly to rent.
Ensure your body and limbs are well
covered and use good quality safety
accessories when welding. A reputable
brand full face welding helmet and
leather welding gloves are essential
equipment.
Improve your weld
with an auto-helmet
Use only genuine
Bernard gun cable spares
Using a good quality auto-darkening
helmet can make your welding
job easier and safer. No more lens
flipping. The lens automatically
darkens from a safety shade 3 to
welding shade when an arc is struck,
leaving both hands free for steadying
your welding torch. Select carefully to
ensure the helmet is appropriate for
your application.
Using genuine Bernard gun cable
spares (tips, nozzles, diffusers & liners)
can save you money with longer
operating life, less downtime and better
weld performance than copy parts.
u
.a
m
co
g.
in
eld
w.w
ww
Save money
with gasless MIG wire
Accessories and Consumables
Size
Spool Size
Part No.
Size (mm)
Part No.
Type
Part No.
Nozzles, head & cap
Austmig ES6 MIG wire
Drive rollers
0.6 mm
ES606M
0.6 & 0.8 for solid wire
W26-0/8
Brass nozzle - straight
BE4391
0.8 & 1.0 for solid wire
W26-1/8
Brass nozzle - tapered
BE4392
0.9 & 1.2 for solid wire
W26-5/8
Head
BE4335
1.0 & 1.2 for aluminium W26-3/8
Cap
BE4323
1.0 & 1.2 for flux cored W26-7/8
Welding helmets
Inlet guides
Helmet with fixed
shade, lift up lens
5 kg
0.8 mm
5 kg
ES608M
0.9 mm
5 kg
ES609M
0.6 mm
15 kg
ES606S
0.8 mm
15 kg
ES608S
0.9 mm
15 kg
ES609S
1.2 mm
15 kg
ES612S
Austfil 71T Flux cored wire gas shielded
1.2 mm
15 kg
71T112S
Fabshield Gasless MIG wire
0.8 mm
4.5 kg
S222306-022
0.9 mm
4.5 kg
S222308-022
1.2 mm
4.5 kg
S222112-022
0.9 mm
15 kg
S222308-029
1.2 mm
15 kg
S222112-029
2.0 ID for steel
W26-0/13
2.4 ID nylon
for aluminium
W27-2/13N
Contact tips
0.6
BE7497
0.8
BE7488
0.9
BE7489
1.0
BE7496
1.2
BE7490
WGAC25
Auto-darkening helmet 770255
for Stick & MIG welding
up to 150 Amps
Flame graphic
auto-darkening
helmet shades 9-13
217288
Inferno helmet elite
industrial model
auto-darkening helmet
shades 9-13.
222669
Liners
0.6 - 0.8 for steel
BE43015
0.9 - 1.2 for steel
BE43115
0.9 - 1.2 nylon
for aluminium
BE43115X
Ordering Information
Model
Includes
Part No
Power source with internal wirefeeder, 3m Bernard gun cable,
3m work lead, gas hose, regulator and operating manual.
CP115-0
Optional trolley cart
AM308-0
175
Weldmatic
Power source with internal wirefeeder, gas bottle trolley with
tool tray, 3m Bernard gun cable, 3m work lead, gas hose,
regulator and operating manual.
CP116-1
8mm
Weldmatic
Power source with internal wirefeeder, wheels & gas bottle
carrier, 3m Bernard gun cable, 5m work lead, gas hose,
regulator and operating manual.
CP118-0
10mm
Weldmatic
Power source with internal wirefeeder, wheels, gas bottle
carrier, 3m Bernard gun cable, 5m work lead, gas hose,
regulator and operating manual.
CP119-0
255
Weldmatic
240V model
CP112-1
480V model
CP112-3
150
Weldmatic
Both models include: Power source with wheels & gas bottle carrier, cable hanger,
separate fully enclosed wirefeeder on 8m interconnecting leads, 3.6 Bernard gun
cable, 5m work lead, gas hose, regulator and operating manual.
ICARUS 3282
Available from:
At WIA we are constantly improving our
products and reserve the right to change
design and/or specification without notice.
Made in Australia by
Welding Industries of Australia
ABN 18 004 547 111
www.welding.com.au