SAILOR COMPACT 2000 PROGRAMME VHF RT2048

VHF RT2048
SAILOR COMPACT 2000 PROGRAMME
ENGLISH
The SAILOR RT2048 VHF radiotelephone has been
designed to comply with the increasing demands of a highly
technological product, which means high quality, small size, etc.
The SAILOR RT2048 has furthermore been designed
to fit into the SAILOR Compact 2000 module programme.
The SAILOR RT2048 can either be installed and
operated as an independent unit, or in combination with other
elements of the Compact 2000 programme. These include a
duplex VHF radiotelephone, a coast telephony station with a
400W PEP SSB transmitter, and an SSB receiver with built-in
FM and AM bands, and a scrambler which ensures complete
communication secrecy.
The SAILOR VHF RT2048 has, by means of the latest
technology in casting technique, been constructed to withstand
the most extreme conditions experienced in small, semi-open
boats. Its compact, weatherproof construction ensures a degree
of resistance to sea spray.
The printed circuits inside have been designed with
a high degree of compactness and exceptional performance.
For more than half a century, SAILOR has been
synonymous with state-of-the-art, high-quality maritime communications equipment - known for sturdiness, ease of operation
and compact design.
SAILOR is a world leader in the technologically
advanced field of maritime communications. A wide range
of products from GMDSS equipment, UAIS, and satellite communications equipment to simple VHF radios ensures the safety
at sea and the daily communication around the world.
In the design of this VHF RT2048 radiotelephone,
SAILOR has taken into account all the circumstances it will be
exposed to in day-to-day operation. However, even a product of
this high quality requires regular servicing and maintenance, and
we recommend a close observance of the directions contained
in the instruction manual.
Fast and professional service is one of our main
concerns. SAILOR has a world-wide net of authorized distributors
in more than 90 countries - and on top of that the SAILOR Certified
Service Centre concept. In this way we are able to service you in
the best way possible all over the world.
Doc. No. B2048GB
Issue: A/0131
NOTE:
16
DISTRESS CALL PROCEDURE
Transmit on channel 16:
MAYDAY MAYDAY MAYDAY
This is:
NAME OF SHIP, call sign or
other identification (THREE
TIMES), followed by:
MAYDAY - NAME OF SHIP Position, type of emergency,
help required and other information which may help rescue
operations.
For clarity when SPELLING OUT
words, the following alphabet
should be used:
A - Alfa
N - November
B - Bravo
O - Oskar
C - Charlie
P - Papa
D - Delta
Q - Quebec
E - Echo
R - Romeo
F - Foxtrot
S - Sierra
G - Golf
T - Tango
H - Hotel
U - Uniform
I - India
V - Victor
J - Juliett
W - Whiskey
K - Kilo
X - X - ray
L - Lima
Y - Yankee
M - Mike
Z - Zulu
PRIVATE CHANNELS
There is standard provision for the
programming of up to 10 private
channels. However, it is possible
to increase the total to 40 private
channels if the scanning facilities
are not required.
1. The distress call should be
repeated from time-to-time
until an answer is heard.
2. If no reply is heard on channel
16, the call should be repeated
on any other available channel.
3. Speak slowly, pronouncing
each word distinctly.
A private channel is indicated with
a prefix and a single digit. For the
10 standard channels the prefix is
a “P”, if increased to 40 private
channels the prefix will be “A”, “E”
and “F”.
SIMPLEX/SEMI-DUPLEX
COMMUNICATION
All the communication, that means
ship/ship, ship/port, and ship/coast
station, is carried out in the simplex or semi-duplex mode. This
means that the handset key switch
is depressed while the message
is delivered, ending with the word
"over". The switch is now released,
allowing the other party to reply.
OPERATING
The operating panel is provided
with a really high quality pushbutton keyboard, offering an attractive solid feel. Furthermore, keyed
operations are instantly confirmed
by means of the display read-out.
To ensure safe operation under all
conditions, the keyboard is fitted
with night-time illumination.
Private channels include fishing
and leisure channels as well as the
special channels allocated by post
and telegraph authorities.
CONTROLS
VOL
SCAN
DELETE
Indication of ON/OFF/VOL
turn-style knob operation.
OFF
SCAN
TIME
Deletes a channel from the scanning table.
Selects the scan time from 1 to 99 seconds. The time chosen
will be used to listen on one of the secondary channels
receiving a signal.
D.W.
SQ
Selects the dual watch facility.
Squelch sensitivity control knob with turn-style operation.
1W
16
Quick select of the call and distress channel 16.
Selects 1W reduced power output.
U.S.
1
Digits from 1 to 0.
Selects the VHF channels used in the USA.
DIM
SHIFT
Activates the functions marked in orange
on the keyboard. Whenever the keyboard
is in “shift-mode” it will be indicated by
“cornerbars” in the display.
SELCALL
T/ R
1w
SCAN
US
Tests the selcall decoder and resets the selcall decoder
after a call.
P
Selects scanning programme.
SCAN
ADD
Tx
The intensity of the LED-indicators can be controlled
in four steps. The keyboard illumination is switched on and off.
Adds a channel to the scanning table.
Selects the standard private channels.
READ-OUT
•
CHANNEL READ-OUT
All international maritime channels
are shown by the two digits, when
the channel has been keyed in.
Selection of a standard private
channel will be indicated with a P-.
1W
POWER
•InREDUCED
harbour areas, or in the close
vicinity of another vessel, transmissions should be with reduced power. When the display shows 1W,
the transmitter power output is
reduced from 25W to 1W.
Where two stations are close
together, this reduction can
improve communication quality.
Tx
US
•
TRANSMITTING
Whenever the handset switch is
depressed, and the transmitter
output power level has reached
an appropriate level, the "TX" will
appear.
If the transmitter time-out timer
is enabled, and an automatic termination of a transmission has
occurred, this indicator will be
flashing.
•
US-CHANNELS
In the USA a number of the international duplex channels are used
as simplex channels. Ships sailing
in American waters must, therefore,
be able to select these channels
as simplex channels. The appearance of "US" on the display indicates that this mode of operation is
in use.
OPERATION
The VHF radiotelephone is operated by means of two turn-style knobs
and a push-button keyboard. This combination ensures a high continuous
resolution on squelch and AF-level, and an easy selection of channels etc
in all situations.
How to Return to
25W Output Power
How to Return to
International Channels
Press:
Press:
1W
The highly efficient LED-display shows the operating channel both under
normal use and in dual watch mode. The display also indicates when the
set is scanning or a call has been detected by the selcall decoder. The
functions 1W, TX, and US are indicated by means of LED-illumination.
U.S.
SHIFT
SHIFT
Read-out:
Read-out:
When the station is switched off, the necessary settings will be stored in
the built-in-memory, and as soon as the station is switched on again, it will
start up on the same channel etc.
How to Select the Distress
and Call Channel 16
How to Select
a Private Channel
Press:
E.g. channel P3. Press:
1W
P
SHIFT
16
3
Read-out:
Read-out:
Tx
1W
US
Tx
US
How to Select Channels
Used in the USA
How to Change
Display Light Intensity
Press:
Press:
DIM
U.S.
SHIFT
SHIFT
Read-Out
For single step change
or
1W
Tx
US
1W
Tx
DIM
US
SHIFT and keep
How to Select a Channel
E.g. channel 23. Press:
How to Select
Reduced Output Power
3
Tx
US
How to Raise Output Power
to 25W on Channels 13 or 67
in US-Mode
Press:
2
1W
1W
SHIFT
Press:
Read-out:
Read-out:
SHIFT and keep
1W
depressed simultaneously with the
handset key.
1W
Tx
US
1W
Tx
US
Read-out:
1W
Tx
US
depressed for multiple step change.
Totally 4 steps in the cycle. In the
step before extinction, the keyboard
will be illuminated.
SELECTIVE CALLING
DUAL WATCH OPERATION
(If built-in)
When a selective call is received from a coast station, the read-out
will alternatively show CA, and the actual selected channel and the
acoustic alarm will sound for 10 seconds.
When an "all ships call" containing distress messages, gale warnings,
navigational warnings, etc, is received from a coast station, the readout will alternatively show C0, and the actual selected channel and
the acoustic alarm will sound until the selcall is reset.
In addition to the selected channel, which is shown on the display, the VHF
station will listen on channel 16 for 0.1 second every 1.2 second.
If there is a signal on channel 11, the dual watch sequence will be as follows:
Any signal received on channel 16 will be heard continuously and the readout will show "16" until the signal ceases.
If the transmitter is keyed, the dual watch function will be switched off and the
read-out will show the channel selected.
How to Test the
Selcall Decoder
Press:
SHIFT
How to Select Dual Watch
SELCALL
T/ R
Press:
D.W.
The read-out will alternate between:
SHIFT
Read-out:
and
1W
Tx
US
1W
Tx
The acoustic alarm will sound.
This read-out indicates that the test
has been correctly carried out.
and
US
1W
Tx
US
alternatively.
Now press:
SHIFT
SELCALL
T/ R
to reset the selcall decoder.
How to Switch Off
Dual Watch
Press:
D.W.
SHIFT
How to Reset
the Selcall Decoder
Read-out:
After an individual call or an "all ships
call" has been received, press:
SHIFT
SELCALL
T/ R
1W
Tx
US
1W
Tx
US
SCANNING
OPERATION
(If scanning is enabled)
The VHF radiotelephone is provided with a flexible scanning facility.
The scanning programme is fully user programmable, and can include all the
international channels and the ten private channels PO -P 9.
When a scanning programme is created by the operator, the programme will
be stored in a memory which retains the scanning programme even when
the station is switched off.
The scanning programme can be changed during operation by pressing
"ADD" or "DELETE".
SCANNING
How to Return to the
Last Channel with Signal
How to Delete a Channel from
the Scanning Programme
Press:
E.g. to delete channel 69, press:
SCAN
SCAN
DELETE
SHIFT
6
9
SHIFT
The read-out shows the next
channel in the programme, e.g.:
How to Check the Channels
Contained in the
Scanning Programme
In principle, scanning is an advanced form of the dual watch system in which
the secondary channel selected changes constantly whilst the distress and
Press:
call channel 16 is listened to simultaneously
SCAN
If, for example, a scanning programme consists of channels 6, 11, 17, and 70, SHIFT and a long press on
the scanning sequence will look like this:
and the channels in the programme
will slowly be shown in the display.
1W
Tx
US
The revised scanning programme
becomes operative by pressing:
SCAN
SHIFT
If there is a signal on channel 11, the sequence will be:
Read-out:
How to Add a Channel
SCAN
to the Scanning
Programme
TIME
»Scan Time«
E.g. to add channel 69, press:
The "Scan Time" is the time during which the scanner listens on channel
11 whilst at the same time watching out on channel 16 - exactly as it
happens on the dual watch system. The "Scan Time" can be programmed
by the operator
To obtain a continuous listening to the signal being received on channel 11,
the scanning is stopped by simply pressing "SHIFT" "SCAN".
SCAN
ADD
6
9
SHIFT
Read-out:
How to Stop the Scanner
Press:
Press any of the buttons:
SCAN
TIME
1W
0
Read-out:
Tx
US
To restart the scanning programme,
press:
SCAN
9
or
US
Press:
SCAN
SHIFT
Tx
How to Read the
Programmed "Scan Time"
The scanning can be started again by pressing "SHIFT" "SCAN".
How to Start the Scanner
1W
16
Read-out e.g.:
SHIFT
and the actual "Scan Time" will be
read out in the next 2.5 seconds,
e. g. scan time = 5 seconds:
SHIFT
Read-out:
1W
Tx
US
followed by the selected channel.
1W
Tx
US
1W
Tx
US
The channel number corresponding
to the activated push-button.
1W
Tx
US
How to Programme/Change
the "Scan Time"
To set the "Scan Time" to
10 seconds press:
SCAN
TIME
SHIFT
SCAN
TIME
1
0
Note! After "SHIFT" "Scan Time"
has been keyed in. The maximum
time between the following entries
must be 2.5 seconds, or the input
sequence will be ignored.
The read-out will be the entered
digits, followed by the selected
channel after a period of 2.5
seconds.
Empty Scanning Programme
If the scanning programme is
empty, or attempt has been made
to add a new channel to a
»full« scanning programme (which
means that the existing programme includes the maximum
number of channels permitted),
the read-out will show:
1W
Tx
US
for a period of 2.5 seconds, followed by the selected channel.
SHIFT
SIMPLEX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
P
P
P
P
P
•
•
• •
• •
•
•
• •
•
• •
• •
DUPLEX
•
•
•
•
•
•
•
•
•
•
•
•
Distress and Calling
•
•
•
•
•
•
•
•
•
•
•
FREQUENCIES
Tx: 156.050 MHz
Rx: 160.650 MHz
Tx: 156.100 MHz
Rx: 160.700 MHz
Tx: 156.150 MHz
Rx: 160.750 MHz
Tx: 156.200 MHz
Rx: 160.800 MHz
Tx: 156.250 MHz
Rx: 160.850 MHz
Tx: 156.300 MHz
Rx: 156.300 MHz
Tx: 156.350 MHz
Rx: 160.950 MHz
Tx: 156.400 MHz
Rx: 156.400 MHz
Tx: 156.450 MHz
Rx: 156.450 MHz
Tx: 156.500 MHz
Rx: 156.500 MHz
Tx: 156.550 MHz
Rx: 156.550 MHz
Tx: 156.600 MHz
Rx: 156.600 MHz
Tx: 156 650 MHz
Rx: 156.650 MHz
Tx: 156.700 MHz
Rx: 156.700 MHz
Tx: 156.750 MHz
Rx: 156.750 MHz
Tx: 156.800 MHz
Rx: 156 800 MHz
Tx: 156.850 MHz
Rx: 156.850 MHz
Tx: 156.900 MHz
Rx: 161.500 MHz
Tx: 156.950 MHz
Rx: 161.550 MHz
Tx: 157.000 MHz
Rx: 161.600 MHz
Tx: 157.050 MHz
Rx: 161.650 MHz
Tx: 157.100 MHz
Rx: 161.700 MHz
Tx: 157.150 MHz
Rx: 161.750 MHz
Tx: 157.200 MHz
Rx: 161.800 MHz
Tx: 157.250 MHz
Rx: 161.850 MHz
Tx: 157.300 MHz
Rx: 161.900 MHz
Tx: 157.350 MHz
Rx: 161.950 MHz
Tx: 157.400 MHz
Rx: 162.000 MHz
SIMPLEX
FREQUENCIES
Tx: 156.050 MHz
Rx: 160.650 MHz
Tx: 156.100 MHz
Rx: 160.700 MHz
Tx: 156.150 MHz
Rx: 160.750 MHz
Tx: 156.200 MHz
Rx: 160.800 MHz
Tx: 156.250 MHz
Rx: 160.850 MHz
Tx: 156.300 MHz
Rx: 156.300 MHz
Tx: 156.350 MHz
Rx: 156.350 MHz
Tx: 156.400 MHz
Rx: 156.400 MHz
Tx: 156.450 MHz
Rx: 156.450 MHz
Tx: 156.500 MHz
Rx: 156.500 MHz
Tx: 156.550 MHz
Rx: 156.550 MHz
Tx: 156.600 MHz
Rx: 156.600 MHz
Tx: 156 650 MHz
Rx: 156.650 MHz
Tx: 156.700 MHz
Rx: 156.700 MHz
Tx: 156.750 MHz
Rx: 156.750 MHz
Tx: 156.800 MHz
Rx: 156 800 MHz
Tx: 156.850 MHz
Rx: 156.850 MHz
Tx: 156.900 MHz
Rx: 156.900 MHz
Tx: 156.950 MHz
Rx: 156.950 MHz
Tx: 157.000 MHz
Rx: 161.600 MHz
Tx: 157.050 MHz
Rx: 157.050 MHz
Tx: 157.100 MHz
Rx: 157.100 MHz
Tx: 157.150 MHz
Rx: 157.150 MHz
Tx: 157.200 MHz
Rx: 161.800 MHz
Tx: 157.250 MHz
Rx: 161.850 MHz
Tx: 157.300 MHz
Rx: 161.900 MHz
Tx: 157.350 MHz
Rx: 161.950 MHz
Tx: 157.400 MHz
Rx: 162.000 MHz
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
P
P
P
P
•
•
DSC
•
•
DUPLEX
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Guard Band
Guard Band
•
•
•
•
•
•
•
•
• •
FREQUENCIES
Tx: 156.025 MHz
Rx: 160.625 MHz
Tx: 156.075 MHz
Rx: 160.675 MHz
Tx: 156.125 MHz
Rx: 160.725 MHz
Tx: 156.175 MHz
Rx: 160.775 MHz
Tx: 156.225 MHz
Rx: 160.825 MHz
Tx: 156.275 MHz
Rx: 160.875 MHz
Tx: 156.325 MHz
Rx: 160.925 MHz
Tx: 156.375 MHz
Rx: 156.375 MHz
Tx: 156.425 MHz
Rx: 156.425 MHz
Tx: 156.475 MHz
Rx: 156.475 MHz
Tx: 156.525 MHz
Rx: 156.525 MHz
Tx: 156.575 MHz
Rx: 156.575 MHz
Tx: 156.625 MHz
Rx: 156.625 MHz
Tx: 156.675 MHz
Rx: 156.675 MHz
Tx: 156.725 MHz
Rx: 156.725 MHz
Tx: 156.775 MHz
Rx: 156 775 MHz
Tx: 156.825 MHz
Rx: 156.825 MHz
Tx: 156.875 MHz
Rx: 156.875 MHz
Tx: 156.925 MHz
Rx: 161.525 MHz
Tx: 156.975 MHz
Rx: 161.575 MHz
Tx: 157.025 MHz
Rx: 161.625 MHz
Tx: 157.075 MHz
Rx: 161.675 MHz
Tx: 157.125 MHz
Rx: 161.725 MHz
Tx: 157.175 MHz
Rx: 161.775 MHz
Tx: 157.225 MHz
Rx: 161.825 MHz
Tx: 157.275 MHz
Rx: 161.875 MHz
Tx: 157.325 MHz
Rx: 161.925 MHz
Tx: 157.375 MHz
Rx: 161.975 MHz
Tx: 157.425 MHz
Rx: 162.025 MHz
U
SA
U -SI
SA M
-D PL
U EX
PL C
EX H
A
C NN
H
AN EL
N S
EL
S
C
H
AN
N
EL
IN
S
TE
R
PO SH
I
RT P
PO
RT
PU
BL
IC
U
SA
U -SI
SA M
-D PL
U EX
PL
EX CH
C AN
H N
AN E
N LS
EL
S
C
H
AN
N
EL
IN
S
TE
R
PO SH
RT IP
PO
RT
PU
BL
IC
CHANNEL APPLICATION AND FREQUENCY TABLE
FREQUENCIES
Tx: 156.025 MHz
Rx: 160.625 MHz
Tx: 156.075 MHz
Rx: 160.675 MHz
Tx: 156.125 MHz
Rx: 160.725 MHz
Tx: 156.175 MHz
Rx: 156.775 MHz
Tx: 156.225 MHz
Rx: 160.825 MHz
Tx: 156.275 MHz
Rx: 156.275 MHz
Tx: 156.325 MHz
Rx: 156.325 MHz
Tx: 156.375 MHz
Rx: 156.375 MHz
Tx: 156.425 MHz
Rx: 156.425 MHz
Tx: 156.475 MHz
Rx: 156.475 MHz
Tx: 156.525 MHz
Rx: 156.525 MHz
Tx: 156.575 MHz
Rx: 156.575 MHz
Tx: 156.625 MHz
Rx: 156.625 MHz
Tx: 156.675 MHz
Rx: 156.675 MHz
Tx: 156.725 MHz
Rx: 156.725 MHz
Tx: 156.775 MHz
Rx: 156 775 MHz
Tx: 156.825 MHz
Rx: 156.825 MHz
Tx: 156.875 MHz
Rx: 156.875 MHz
Tx: 156.925 MHz
Rx: 156.925 MHz
Tx: 156.975 MHz
Rx: 156.975 MHz
Tx: 157.025 MHz
Rx: 157.025 MHz
Tx: 157.075 MHz
Rx: 157.075 MHz
Tx: 157.125 MHz
Rx: 157.125 MHz
Tx: 157.175 MHz
Rx: 157.175 MHz
Tx: 157.225 MHz
Rx: 161.825 MHz
Tx: 157.275 MHz
Rx: 161.875 MHz
Tx: 157.325 MHz
Rx: 161.925 MHz
Tx: 157.375 MHz
Rx: 161.975 MHz
Tx: 157.425 MHz
Rx: 157.425 MHz
QUICK SELECT CHART
Distress and Call Channel
Channel Selection
16
1
3
U.S.
US-mode (Channel Required in the USA)
SHIFT
Reduced Power
SHIFT
Dual Watch
SHIFT
Start Scanning
SHIFT
1W
D.W.
SCAN
Add a Channel to Scanning Programme
Delete a Channel from Scanning Programme
Set of ”Scan Time” to 10 Seconds
SCAN
ADD
2
3
SHIFT
3
SHIFT
SCAN
DELETE
2
SCAN
TIME
SHIFT
SCAN
TIME
1
0
SHIFT
SAILOR
SAILOR ® • Porsvej 2 • PO Box 7071 • DK-9200 Aalborg SV • Denmark
Phone: +45 9634 6100 • Fax: +45 9634 6101 • Telex: 69789 ECI DK
E-mail: sailor@sailor.dk • Web: www.sailor.dk