DRILLING AND TAPPING TOOLS - Wheeler-Rex

DRILLING AND TAPPING TOOLS
HOT TAPPING SYSTEM
Capacity: from 3/4" to 2" (19–50mm) in Steel, Cast Iron, Ductile, and Plastic Pipe. The
Wheeler-Rex Hot Tapping System is hand operated and designed for drilling holes in active
water lines up to 250 psi. It is lightweight and easy for one man to set up and use. Complete
with 6515 ratchet, tool box, adapters and cutter shells for making 3/4" (19mm) and 1" (25mm)
holes. Adapters and cutter shells for over 1" do not come with standard kits and must be
purchased separately.
Shipping weight (all models) ....................................................................18 lbs.
8100
8200
8300
(8kg)
With 3/4" and 1" (19–25mm) HSS cutters and adapters to fit NPT threads.
With 3/4" and 1" (19–25mm) HSS cutters and adapters to fit flared (CTS) ends.
With 3/4" and 1" (19–25mm) HSS cutters and adapters to fit BSPT threads.
Built-in bleed-off valve allows chips to be flushed away.
ADAPTERS FOR NPT THREAD Model 8100
Wheeler Part No.
802051+
802053+
802055
802057
802059
Description
3
/4" NPT Adapter
1" NPT Adapter
1 1/4" NPT Adapter
1 1/2" NPT Adapter
2" NPT Adapter
ADAPTERS FOR CTS FLARE Model 8200
Cutaway View
Wheeler Part No.
802050*
802052*
802054
802056
802058
Description
3
/4" CTS Flare Adapter
1" CTS Flare Adapter
1 1/4" CTS Flare Adapter
1 1/2" CTS Flare Adapter
2" CTS Flare Adapter
ADAPTERS FOR BSPT THREADS Model 8300
Wheeler Part No.
802071s
802072s
802073
802074
802075
Description
3
/4" BSPT Adapter
1" BSPT Adapter
1 1/4" BSPT Adapter
1 1/2" BSPT Adapter
2" BSPT Adapter
ADAPTERS FOR MUELLER 110 CORP STOPS
Wheeler Part No. Description
802060
1 1/2" Adapter
802061
2" Adapter
CUTTER SHELLS FOR STEEL AND COPPER
Wheeler Part No.
903071*+ s
903072*+ s
903073
903074 #
903075 #
Description
3
/4" HSS Shell Cutter
1" HSS Shell Cutter
1 1/4" HSS Shell Cutter
1 1/2" HSS Shell Cutter
2" HSS Shell Cutter
CUTTER SHELLS FOR DUCTILE &CAST IRON
Wheeler Part No.
904065
904066
904067
904068
904069
Description
3
/4" Carbide Tip Shell Cutter
1" Carbide Tip Shell Cutter
1 1/4" Carbide Tip Shell Cutter
1 1/2" Carbide Tip Shell Cutter
2" Carbide Tip Shell Cutter
CUTTER SHELLS FOR PLASTIC
Wheeler Part No.
5800
5801
802084
802085
Description
3
/4" Shell Cutter for C-900 Plastic
1" Shell Cutter for C-900 Plastic
1 1/2" Shell Cutter for C-900 Plastic
2" Shell Cutter for C-900 Plastic
OTHER ACCESSORIES
Wheeler Part No. Description
1
/2" Square Male Drive Ratchet
6515
908097 #
Threaded Adapter Assembly
908094
Center Drill
+Included with 8100 System *Included with 8200 System sIncluded with 8300 System
# Adapter included with Cutter Shell
701440 1 1/2" & 2" Arbor Assembly Hot Tap System Adapter
Reinforced Arbor for cutting larger holes in difficult materials. To be used with 11/2" and 2"
cutter shells for all three Wheeler-Rex hot tap systems. The new arbor design has drive pins
that align with holes in the large cutter shells for a stronger assembly.
Required for all 11/2"
& 2" Cutter Shells
46
Shipping weight ..........................................................................................2 lbs.
(.9kg)
j'7OƒOoƢźƢMȼšÌ̤¼·y°ƢY¼¼°ƢyÒy°¼›ƢźƢ*ÌÌ؏ƢIJ
COMBINED DRILL TAPS
Wheeler's combined drill taps bring you premium performance at a reasonable price.
Designed and manufactured to produce a quality thread and ensure a pressure tight
fit. Made from high speed steel, they are tough and durable and fit all popular tapping
machines.
Wheeler-Rex Drill Taps will fit all popular tapping machines including:
-UELLER"s-UELLER"s-UELLER!s-UELLER!s(AYS4RANSMATE"s!LL2EED
89075
89100
86075
86100
3
/4" CC Thread Drill Tap ............................................................................1.1 lbs.
1" CC Thread Drill Tap ..............................................................................1.3 lbs.
3
/4" CC PVC Drill Tap .................................................................................1.1 lbs.
1" CC PVC Drill Tap ...................................................................................1.3 lbs.
(.49kg)
(.58kg)
(.45kg)
(.58kg)
Resharpening service only available for Wheeler-Rex CC Thread Drill Taps (not available for PVC Drill Taps).
TAPPING FLUID
A completely new concept in a lubricant for drill taps and other related uses where a nontoxic
food grade lubricant is required. Slik-tap is easy to apply, yet thick enough to hang onto
the cutting tool, providing the lubrication to reduce tapping effort and produce clean
threads.
8900
1 pint of Tapping Fluid Slik-Tap................................................................1.5 lbs. (.68kg)
8901
12 pack of 8900 Tapping Fluid Slik-Tap ....................................................15 lbs. (6.8kg)
PORTABLE HOLE CUTTER SYSTEM
A compact, light-weight hole cutter system that utilizes a drill to cut a hole in pipes.
Designed to cut most materials, including steel.
3092
Without drill – provide your own:
3090
With adaptor only for Milwaukee® Drill (less drill) ....................................46 lbs. (21kg)
3091
With adaptor only for DeWalt® DW130V Drill (less drill)............................45 lbs. (20.45kg)
With drill:
3092
Hole Cutter System with Milwaukee® Model 1660-6 Drill ........................58 lbs. (26.3kg)
3093
Hole Cutter System with DeWalt® DW130V Drill .......................................54 lbs. (24.5kg)
(.5kg)
701173 Drill Adapter Kit for DeWalt® 131 Drill for all models ................................... 1 lb.
Accessories:
276436 2-Pin Arbor ..........................................................................................................
908094 Center Drill ..........................................................................................................
Features:
3093
s Cuts holes up to 4 3/4" (120mm)
s For use with standard off-the-shelf hole saw (not included)
s Comes standard with metal carrying case
sComes standard with enough chain for 10" pipes, extra chain available
upon request
s Handle can be changed for right or left feed
s Rack & pinion feed gear
s Fast, easy, secure mounting to pipe
s Spring loaded pin holds drill in position
s Comes complete and ready to use with either:
DeWalt® DW130V Drill or Milwaukee® 1660-6 Drill
47
DRILLING AND TAPPING TOOLS
1662
ELECTRIC
CONTINUED
INVENTED BY:
HOLE CUTTER SYSTEM
1661
PNEUMATIC
1660
GAS
1663
HYDRAULIC
The Wheeler-Rex Hole Cutter System is designed to easily cut holes from 4"–12"
(100–300mm) into clay tile, ductile and cast iron, plastic and reinforced concrete pipes.
The unit is available with a variety of power sources including 2-cycle gasoline engine,
pneumatic motor, electric motor and hydraulic motor. The system is modular in design
which allows a single operator to set up and perform non-pressure taps safely and
quickly. The basic system can be used on pipes from 6"– 20" (150–500mm) O.D. and the
capacity can be extended by simply adding chain to the hold down mechanism. Set
up normally takes 5 –10 minutes and actual cutting time is 5 –10 minutes depending on
pipe material and wall thickness.
1660
Complete with gasoline power pack and water valve assembly
Shipping weight (less cutter shells)........................................................................... 108 lbs. (49kg)
1661
Complete with air power pack and water valve assembly, 70–80 psi (4.6–5.5 bar),
50–60 cfm (1400–1700 lpm) Shipping weight (less cutter shells)......................... 123 lbs. (55.9kg)
276582
Air Motor Repair Kit
1662
Complete with 115V electric motor and water valve assembly
Shipping weight (less cutter shells)........................................................................... 102 lbs. (46kg)
1663
Complete with hydraulic motor and water valve assembly, 8 gpm, 2000 psi
(30 lpm @ 130 bar) Shipping weight (less cutter shells).......................................... 100 lbs. (45.45kg)
Requires external hydraulic source. See page 9 for Model 6500 Hydraulic Power Pack
1664
Hole Cutter System less drive ...................................................................................... 93 lbs. (43kg)
701186 Bypass Valve for 1663 Hole Cutter System 8 gpm, 2000 psi................................... 10.5 lbs. (4.7kg)
The Model 701186 is a Bypass Valve Kit designed to be used with your skid loader, backhoe or tractor for the
Wheeler-Rex Model 1663 Hydraulic Hole Cutter Sysem. The 701186 will adapt your current hydraulic system to the
specs required to operate the 1663 Hole Cutter System. (8 gpm and 2000 psi required) Portable at 10 pounds and easy
to connect. The hole cutter’s hydraulic lines will directly attach to the quick disconnects for both input & output points
on the bypass valve. Hydraulic lines not included (between hydraulic power source & bypass valve.)
210
211
220025
HSS Center Drill for CI, DI & Plastic Pipe
Carbide-Tipped Center Drill for Clay and Concrete
Coupon Retainer
HOLE CUTTER SHELLS
701186
Bypass Valve
Nominal
Hole Size
4" (100mm)
4 1/2" (112mm)
6" (150mm)
6 1/2" (172mm)
8" (200mm)
Clay Concrete
3395*
3450*
3595*
3650*
* Water coolant required
Reinforced Concrete, Clay,
Ductile & Cast Iron
6395*
6450*
6595*
6650*
6800*
Plastic
4395
4450
4595
4650
4800
Larger sizes available upon request
EARTHWORM HYDRO-DRILL
Bores holes underground without trenching or disturbing surface materials. Ideal for installing
water, gas, drain, and electrical lines. Comes standard with a combination drive/water valve
assembly, and a 2" (50mm) diameter auger. User supplies 3/4" pipe for drill shaft.
7800
Shipping weight......................................................................................................... 3.65 lbs. (1.65kg)
48
Additional Augers
7801
1" (25mm) Auger
7802
2" (50mm) Auger
7810
3" (75mm) Auger
7808
4" (100mm) Reversing Auger
7809
6" (150mm) Reversing Auger
j'7OƒOoƢźƢMȼšÌ̤¼·y°ƢY¼¼°ƢyÒy°¼›ƢźƢ*ÌÌ؏ƢIJ
PIPE SLICES
8600 PIPE SLICE with 1" NPT Male Thread, 3 Blades .................................3 lbs.
Splits 3/4" to 2" poly pipe and copper or pulls out 3/4" – 2" lead or galvanized services.
(1.4kg)
Accessories:
8605
8606
8607
8608
8610
8625
8626
Kits:
Poly/Copper Pipe
Pulling Attachments
8627
8628
8629
8630
/8"x 50' Cable with Ferrule.......................................................................16 lbs. (7.5kg)
/8"x 75' Cable with Ferrule .......................................................................22 lbs. (10kg)
3
/8"x100' Cable with Ferrule .....................................................................28 lbs. (12.7kg)
3
/8"x150' Cable with Ferrule .....................................................................37 lbs. (16.8kg)
Cable Grip ...................................................................................................7 lbs.
(3kg)
3
/4" Poly/Copper Pipe Pulling Attachment .................................................... 2 lb.
(.9kg)
1" Poly/Copper Pipe Pulling Attachment ...................................................... 2 lb.
(.9kg)
3
3
Includes 8600 Pipe Slice, 8605 50' Cable/Ferrule, 8610 Grip ...................25 lbs. (11.4kg)
Includes 8600 Pipe Slice, 8606 75' Cable/Ferrule, 8610 Grip ...................31 lbs. (14kg)
Includes 8600 Pipe Slice, 8607 100' Cable/Ferrule, 8610 Grip .................38 lbs. (17.3kg)
Includes 8600 Pipe Slice, 8608 150' Cable/Ferrule, 8610 Grip .................46 lbs. (21kg)
II
8601 PIPE SLICE with 11/2" – 12 Straight Thread, Single Blade ........ 2.5 lbs.
Splits 3/4" to 1" poly or copper pipe or pulls out 1" lead or galvanized services.
Cable & Grip
(1.2kg)
Accessories:
Poly Pipe Pulling
Attachments
Double
Flare
Tool
8605
8606
8607
8608
8610
8645
8646
8648*
8649*
8647
Kits:
8620
8621
8622
8623
8640
8641
8642
/8"x 50' Cable with Ferrule.......................................................................16 lbs. (7.5kg)
/8"x 75' Cable with Ferrule .......................................................................22 lbs. (10kg)
3
/8"x100' Cable with Ferrule .....................................................................28 lbs. (12.7kg)
3
/8"x150' Cable with Ferrule .....................................................................37 lbs. (16.8kg)
Cable grip....................................................................................................7 lbs.
(3kg)
3
/4" PE Pipe Pulling Attachment ................................................................. 2 lb. (.91kg)
1" PE Pipe Pulling Attachment ................................................................... 2 lb. (.91kg)
3
/4" Copper Flare Locknut .......................................................................... 1 lb. (.45kg)
1" Copper Flare Locknut ............................................................................ 1 lb. (.45kg)
3
/4" and 1" Double Flare Tool ..................................................................... 2 lb. (.91kg)
3
3
Includes 8601 Pipe Slice II, 8605 50' Cable/Ferrule, 8610 Grip ................25 lbs. (11kg)
Includes 8601 Pipe Slice II, 8606 75' Cable/Ferrule, 8610 Grip ................31 lbs. (14kg)
Includes 8601 Pipe Slice II, 8607 100' Cable/Ferrule, 8610 Grip ..............38 lbs. (17kg)
Includes 8601 Pipe Slice II, 8608 150' Cable/Ferrule, 8610 Grip ..............46 lbs. (20.9kg)
Includes 8601 Pipe Slice II, 8645 & 8646 PE Pulls, 8648 & 8649
Copper Locknut, 8647 Flare Tool .................................................................7 lbs. (3.0kg)
Includes 8601 Pipe Slice II, 8645 & 8646 PE Pulls ..........................................5 lbs. (2.3kg)
Includes 8601 Pipe Slice II, 8648 & 8649 Copper Locknut, 8647 Flare Tool ......5 lbs. (2.2kg)
*New Fittings for Copper Pipe:
Copper Connections: Simply slide the locking nut over the pipe, flare it and then slide
the locking nut up and thread onto the back of the Pipe Slice II. The Pipe Slice II now
has a radius at the back end to assist in securing the pipe to the tool.
Pulled by winch, backhoe,
or a service truck.
REMOVAL
PROCEDURE
FOR SPLIT PE
OR COPPER
PIPE
Damaged Pipe
Water
Main
Meter
Box
Side
REMOVAL
PROCEDURE
FOR LEAD OR
GALVANIZED
PIPE
Pulled by winch, backhoe,
or a service truck.
Removes existing line.
Lead or
Galvanized Pipe
Water
Main
8500 MINI PIPE SLICE for 1/2" to 3/4" lines with 1/2" NPT Male Thread ........1 lb.
Mini Pipe Slice
ip
New P
e
Copper Flare
Locknut
Removes existing pipe
completely intact.
(.5kg)
Accessories:
8506
8507
8508
8525
/4"x50' Cable and Ferrule ..........................................................................8 lbs.
/4"x75' Cable and Ferrule ........................................................................11 lbs.
1
/4"x100' Cable and Ferrule ......................................................................13 lbs.
1
/2"– 3/4" Poly Pipe Pull Attachment .............................................................1 lbs.
(3.6kg)
(5kg)
(5.9kg)
(.45kg)
Includes 8500 Mini Slice, 8506 50' Cable, 8610 Cable Grip ......................15 lbs.
Includes 8500 Mini Slice, 8507 75' Cable, 8610 Cable Grip ......................18 lbs.
Includes 8500 Mini Slice, 8508 100' Cable, 8610 Cable Grip ....................21 lbs.
(6.8kg)
(8kg)
(9.5kg)
1
1
Kits:
8520
8521
8522
Other cable lengths available upon request.
49