Dell 2707WFP Flat Panel Mntr Specifications

Dell 2707WFP Flat Panel Monitor User's Guide About Your Monitor
Solving Problems
Front View
Monitor Specific Troubleshooting
Back View
Common Problems
Side View
Video Problems
Bottom View
Product Specific Problems
Monitor Specifications
Universal Serial Bus (USB) Specific Problems
Universal Serial Bus (USB) Interface
Dell Soundbar (Optional) Troubleshooting
Card Reader Specifications
Card Reader Troubleshooting
Plug and play capability
Appendix
Caring for Your Monitor
FCC Notice (U.S. Only)
Using Your Adjustable Monitor Stand
Safety Instructions
Organizing Your Cables
Contacting Dell
Using the Tilt, Swivel and Vertical Extension
Your Monitor Setup Guide
Setting Up Your Monitor
Product Information Guide
Connecting Your Monitor
Using the Front Panel Buttons
Using the OSD
Using the Dell Soundbar (Optional)
Setting the Optimal Resolution
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, and Dell
OpenManage are trademarks of DellInc; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; Adobe is a trademark of
Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection
Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2707WFP
June 2007 Rev. A01
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
About Your Monitor
Dell 2707WFP Flat Panel Monitor User's Guide
Front View
Universal Serial Bus (USB) Interface
Back View
Card Reader Specifications
Side View
Plug and play capability
Bottom View
Caring for Your Monitor
Monitor Specifications
Front View
1
Input indicators
2
Input Source Select
3
PIP (Picture In Picture) / PBP (Picture By Picture) Select
4
OSD Menu / Select 5
Brightness / Contrast Hotkey and Down (-) button
6
Auto Adjust and Up (+) button
7
Power button (with power light indicator)
Downloaded from ManualMonitor.com Manuals
Back View
1
Barcode serial number label
Indicates the service part number for the monitor.
2
Security lock slot
Use a security lock with the slot to help secure your monitor.
3
Dell Soundbar mounting brackets
Attach the optional Dell Soundbar.
4
Regulatory rating label
List the regulatory approvals.
5
Service tag label
Refer to this label if you need to contact Dell for technical support.
6
Connectors label
Indicate the positions and types of connectors.
7
VESA mounting holes (100mm)
Use to mount the monitor.
8
Cable management hole
Help organize cables by placing them through the hole.
Side View
Left side
1
Card reader: for details please refer to Card Reader Specifications
2
USB downstream ports
Bottom View
Downloaded from ManualMonitor.com Manuals
Right side
1
AC power cord connector
2
DC power connector for Dell Soundbar
3
DVI connector
4
VGA connector
5
Composite video connector
6
Component video connector - Y
7
S-Video connector
8
USB upstream port
9
USB downstream ports
10
Component video connector - Pr
11
Component video connector - Pb
Monitor Specifications
General
Model number
2707WFP
Flat Panel
Screen type
Active matrix - TFT LCD
Screen dimensions
27 inches (27-inch viewable image size)
Preset display area:
Horizontal
581.96 mm (22.9 inches)
Vertical
363.60 mm (14.30 inches)
Pixel pitch
0.303 mm
Viewing angle
+/- 89° (vertical) typ, +/- 89° (horizontal) typ
Luminance output
450 cd/m ²(typ)
Contrast ratio
1000:1 (typ)
Faceplate coating
Antiglare with hard-coating 3H
Backlight
16 CCFLs Direct-type backlight, 92% wide color gamut
Response Time
6 ms typical (Grey to Grey) / 16 ms typical (Black to White) Resolution
Horizontal scan range
30 kHz to 81 kHz (automatic)
Vertical scan range
56 Hz to 76 Hz, exception 1680 x 1200 & 1920 x 1200 at 60 Hz only
Optimal preset resolution
1920 x 1200 at 60 Hz (VESA CVT-R Mode)
Highest preset resolution
1920 x 1200 at 60 Hz (VESA CVT-R Mode)
Downloaded from ManualMonitor.com Manuals
Video Supported Modes
Video display capabilities (DVI playback)
480p/576p/720p/1080p(Supports HDCP)
Video display capabilities (Composite
playback)
NTSC/PAL
Video display capabilities (S-Video playback)
NTSC/PAL
Video display capabilities (Component
playback)
480i/480p/576i/576p/720p/1080i
Preset Display Modes
Dell guarantees image size and centering for all preset modes listed in the following table.
Display Mode
Horizontal Frequency
(kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity (Horizontal/Vertical)
VGA, 720 x 400
31.5
70.1
28.3
-/+
VGA, 640 x 480
31.5
59.9
25.2
-/-
VESA, 640 x 480
37.5
75.0
31.5
-/-
VESA, 800 x 600
37.9
60.3
40.0
+/+
VESA, 800 x 600
46.9
75.0
49.5
+/+
VESA, 1024 x 768
48.4
60.0
65.0
-/-
VESA, 1024 x 768
60.0
75.0
78.8
+/+
VESA, 1152 x 864
67.5
75.0
108.0
+/+
VESA, 1280 x 1024
64.0
60.0
108.0
+/+
VESA, 1280 x 1024
80.0
75.0
135.0
+/+
VESA, 1600 x 1200
75.0
60.0
162.0
+/+
VESA, 1920 x 1200
74.0
60.0
154.0
+/-
Electrical
Video input signals
Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input impedance with HDCP support.
S-video, Y input 1 volt (p-p), C input 0.286 volt (p-p), 75 ohm input impedance
Composite, 1 volt (p-p), 75 ohm input impedance
Component: Y, Pb, Pr are all 0.5~1volt (p-p), 75 ohm input impedance Synchronization input signals
separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green)
AC input voltage / frequency / current
100 to 240 VAC / 50 or 60 Hz + 3 Hz / 3.0A
Inrush current
120V: 40A (Max.)
240V: 80A (Max.)
Physical Characteristics
Signal cable type
D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor
S-video: Not included with display Composite: Not included with display
Component: Not included with display Dimensions (with stand):
Height (Fully extended )
532.75 mm (20.97 inches)
Height (Compressed)
441.80 mm (17.39 inches)
Width
634.00 mm (24.96 inches)
Depth
243.15 mm (9.57 inches)
Downloaded from ManualMonitor.com Manuals
Weight Monitor (Stand and Head)
12.5 Kg (27.5 lb)
Monitor Flat panel only (VESA Mode)
8.5 Kg (18.7 lb)
Weight with packaging
16.0 Kg (35.28 lb)
Environmental
Temperature:
Operating
5° to 35°C (41° to 95°F)
Non-operating
Storage: 0° to 60°C (32° to 140°F)
Shipping: -20° to 60°C (-4° to 140°F)
Humidity:
Operating
10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Altitude:
Operating
3,657.6 m (12,000 ft) max
Non-operating
12,192 m (40,000 ft) max
Thermal dissipation
375.0 BTU/hour (maximum)
195.0 BTU/hour (typical)
Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption
when not in use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the computer,
the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal
operation
Active
Active
Active
Blue
140W (maximum)*
75W (normal)**
Active-off
mode
Inactive
Inactive
Blanked
Amber
Less than 2 W
Off
Less than 1 W (at 230 V)
Switch off
-
-
-
* With Audio + USB
** Without Audio + USB
This monitor is ENERGY STAR®-compliant.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Downloaded from ManualMonitor.com Manuals
Pin Number
15-pin Side of the Connected Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R
7
GND-G
8
GND-B
9
Computer 5V/3.3V
10
GND-sync
11
GND
12
DDC data
13
H-sync
14
V-sync
15
DDC clock
DVI Connector Pin Number
24-pin Side of the Connected Signal Cable
1
TMDS RX2-
2
TMDS RX2+
3
TMDS Ground
4
Floating
5
Floating
6
DDC Clock
7
DDC Data/span>
8
Floating
9
TMDS RX1- /span>
10
TMDS RX1+
11
TMDS Ground
12
Floating
Downloaded from ManualMonitor.com Manuals
13
Floating
14
+5V / +3.3V power
15
Self test
16
Hot Plug Detect
17
TMDS RX0-
18
TMDS RX0+
19
TMDS Ground
20
Floating
21
Floating
22
TMDS Ground
23
TMDS Clock+
24
TMDS Clock-
S-video Connector
Pin Number
5-pin Side of the Connected Signal Cable (Cable not included)
1
GND
2
GND
3
LUMA
4
CHROMA
Composite Video Connector
Pin Number
1
1-pin Side of the Connected Signal Cable (cable not included)
LUMA COMPOSITE CHROMA
Component Video Connector
Pin Number
3-pin Side of the Connected Signal Cable (Cable not included)
1
Pr (Color differential signal)
2
Pb (Color differential signal)
3
Y (Luminance signal)
Universal Serial Bus (USB) Interface
Downloaded from ManualMonitor.com Manuals
This monitor supports High-Speed Certified USB 2.0 interface.
Data Rate Power Consumption
High speed 480 Mbps 2.5W (Max., each port)
12 Mbps
2.5W (Max., each port)
Low speed 1.5 Mbps
2.5W (Max., each port)
Full speed
USB Upstream Connector
Pin Number
4-pin Side of the Connector
1
DMU
2
VCC
3
DPU
4
GND
USB Downstream Connector
Pin Number
4-Pin Side of the Signal Cable
1
VCC
2
DMD
3
DPD
4
GND
USB Ports
l
l
1 upstream - rear
4 downstream - 2 on rear; 2 on left side
NOTE: USB 2.0 capability requires 2.0 capable computer NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality.
Card Reader Specifications Overview
l
The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
Downloaded from ManualMonitor.com Manuals
l
l
l
The Flash Memory Card Reader is automatically recognized by Windows® 2000 and XP.
Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
Features
The Flash Memory Card Reader has the following features:
l
l
l
l
l
Supports Windows 2000 and XP operating systems
No Windows 9X support from Dell
Mass Storage Class device (No drivers are required under Windows 2000 and XP)
USB-IF certification
Supports various memory card media
Slot Number
Type of Flash Memory Card
1
Compact Flash type I/II Card (CF I/II) / CF form factor ATA hard drives to USB 2.0 bus
2
Smart Media Card (SMC)
Memory Stick Card (MS) / High Speed Memory Stick (HSMS) / Memory Stick Pro Card (MS PRO) / Memory Stick Duo (with Adapter)
Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/ TransFlash Card (with Adapter)
MultiMedia Card (MMC) / Reduced Size MultiMedia Card (with Adapter)
General
Connection type
USB 2.0 High Speed Device (USB Full Speed Device compatible)
Supported OS
Windows 2000 and XP
Performance
Transfer Speed
Read: 480 Mb/s (max.)
Write: 480 Mb/s (max.)
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different
settings; but in most cases, monitor installation is automatic.
Downloaded from ManualMonitor.com Manuals
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor. CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. l
l
l
l
l
To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a slightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics. If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
Handle your monitor with care as darker-colored plastics may scratch and show white scuff marks more than lighter-colored monitor. To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
Appendix
Dell 2707WFP Flat Panel Monitor User's Guide
FCC Notice (U.S. Only)
CAUTION: Safety Instruction
Contacting Dell
Your Monitor Set-up Guide
Product Information Guide
FCC Notice (U.S. Only)
FCC Class B
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may
cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
l
l
l
l
Reorient the receiving antenna.
Relocate the system with respect to the receiver.
Move the system away from the receiver.
Plug the system into a different outlet so that the system and the receiver are on different branch circuits.
If necessary, consult a representative of Dell Inc. or an experienced radio/television technician for additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:
l
Product name: 2707WFP
l
Model number: 2707WFPc
l
Company name:
Dell Inc.
Worldwide Regulatory Compliance & Environmental Affairs
One Dell Way
Round Rock,TX 78682 USA 512-338-4400
CAUTION: Safety Instruction
CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
Downloaded from ManualMonitor.com Manuals
l
To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating current
(AC) power available at your location:
¡ 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea (also 220 volts (V)/60
hertz (Hz)), and Taiwan.
¡ 230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East.
Always be sure that your monitor is electrically rated to operate with the AC power available in your location.
NOTE: This monitor does not need or have a voltage selection switch for setting the AC voltage input. It will automatically accept any AC input voltage according to the ranges defined
the “Electrical Specifications" section.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Do not store or use the LCD monitor in locations that are exposed to heat, direct sunlight, or extreme cold.
Avoid moving the LCD monitor between locations with large temperature differences.
Do not subject the LCD monitor to severe vibration or high impact conditions. For example, do not place the LCD monitor inside a car trunk.
Do not store or use the LCD monitor in locations exposed to high humidity or dusty environment.
Do not allow water or other liquids to spill on or into the LCD monitor.
Keep flat panel monitor in room temperature conditions. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display.
Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.
To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case.
Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable. Keep the power cable away from where
people could trip over it.
Be sure to grasp the plug, not the cable, when disconnecting the monitor from an electric socket.
Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Avoid using the monitor
on a bed, sofa, rug, or other soft surface, as doing so may block the ventilation openings in the bottom of the cabinet. If you place the monitor in a bookcase or
an enclosed space, be sure to provide adequate ventilation and air flow.
Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway.
Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an
authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, being sure to unplug the monitor first.
Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply.
Locate your monitor near an easily accessible electric outlet.
If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an
authorized dealer or service center.
Do not attempt to remove the back cover, as you will be exposed to an electrical shock hazard. The back cover should only be removed by qualified service
personnel.
High temperatures can cause problems. Don't use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.
Unplug the monitor when it is going to be left unused for an extended period of time.
Unplug your monitor from the electric outlet before any service is performed.
Hg Lamp(s) inside this product contains mercury and must be recycled or disposed of according to local, state or federal laws. For more information, Go Or
contact the electronic industries alliance: http://www.eiae.org for more information.
Contacting Dell
You can contact Dell through the Internet and by phone:
l
l
l
For support through the web, go to support.dell.com .
For worldwide support through the web, use the Choose A Country/Region menu near the bottom of the page, or see the web addresses listed in the following
table.
For support by e-mail, see the e-mail addresses listed in the following table.
NOTE: Toll-free numbers are for use within the country for which they are listed.
NOTE: In certain countries, support specific to Dell? XPS? computers is available at a separate telephone number listed for participating countries. If you do not
see a telephone number listed that is specific for XPS computers, you may contact Dell through the support number listed and your call will be routed appropriately.
l
For support by phone, use the phone numbers and codes provided in the following table. If you need assistance in determining which codes to use, contact a
local or an international operator.
NOTE: The contact information provided was deemed correct at the time that this document went to print and is subject to change.
Country (City)
International Access Code
Country Code
City Code
Anguilla
Service Type
Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
Online Support
www.dell.com/ai
E-mail Address
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 800-335-0031
www.dell.com.ag
Antigua and Barbuda
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
Downloaded from ManualMonitor.com Manuals
1-800-805-5924
Technical Support
toll-free: 0800-105
Customer Service (Xiamen, China)
34 160 910
Transaction Sales (Xiamen, China)
29 693 115
Online Support
www.dell.com.ar
E-mail for Desktops and Portables
la-techsupport@dell.com
E-mail for Servers and EMC ® Storage Products
la_enterprise@dell.com
Customer Service
toll-free: 0-800-444-0730
Country Code: 54
Technical Support - Dell PowerApp™, Dell PowerEdge™, Dell PowerConnect™, and Dell PowerVault™
toll-free: 0-800-222-0154
City Code: 11
Technical Support Services
toll-free: 0-800-444-0724
Sales
0-810-444-3355
Aomen
Country Code: 853
Argentina (Buenos Aires)
International Access Code: 00
www.dell.com.aw
Aruba
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 800-1578
support.ap.dell.com
Online Support
Australia (Sydney)
International Access Code: 0011
Country Code: 61
City Code: 2
support.ap.dell.com/contactus
Technical Support
Technical Support for XPS computers only
toll-free: 1300 790 877
Home and Home Office
toll-free: 1300-655-533
Medium and Large Business
toll-free: 1800-633-559
Small Business, Education, Local Government
toll-free: 1800-060-889
Customer Service
toll-free: 1300-662-196
support.euro.dell.com
Online Support
tech_support_central_europe@dell.com
Austria (Vienna)
International Access Code: 900
Country Code: 43
City Code: 1
Technical Support for XPS computers only
08 20 24 05 30 81
Home/Small Business Sales
08 20 24 05 30 00
Home/Small Business Fax
08 20 24 05 30 49
Home/Small Business Customer Service
08 20 24 05 30 14
Home/Small Business Support
08 20 24 05 30 17
Preferred Accounts/Corporate Customer Service
08 20 24 05 30 16
Preferred Accounts/Corporate Support
08 20 24 05 30 17
Switchboard
08 20 24 05 30 00
www.dell.com/bs
Bahamas
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-866-874-3038
www.dell.com/bb
Barbados
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
1-800-534-3142
Online Support
support.euro.dell.com
Technical Support for XPS computers only
02 481 92 96
General Support
02 481 92 88
International Access Code: 00
General Support Fax
02 481 92 95
Country Code: 32
Customer Service
02 713 15 65
Corporate Sales
02 481 91 00
Fax
02 481 92 99
Switchboard
02 481 91 00
Belgium (Brussels)
City Code: 2
www.dell.com/bm
Bermuda
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
1-877-890-0751
www.dell.com/bo
Bolivia
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
Downloaded from ManualMonitor.com Manuals
toll-free: 800-10-0238
Brazil
International Access Code: 00
Country Code: 55
City Code: 51
British Virgin Islands
www.dell.com/br
Online Support
BR_TechSupport@dell.com
Customer Service and Tech Support
0800 970 3355
Technical Support Fax
51 2104 5470
Customer Service Fax
51 2104 5480
Sales
0800 970 3390
Technical Support, Customer Service, Sales
toll-free: 1-866-278-6820
Technical Support (Penang, Malaysia)
604 633 4966
604 633 3101
Brunei
Customer Service (Penang, Malaysia)
or toll-free: 801 1012
Country Code: 673
604 633 3101
Transaction Sales (Penang, Malaysia)
or toll-free: 801 1012
Canada (North York, Ontario)
International Access Code: 011
Cayman Islands
Chile (Santiago)
Online Order Status
www.dell.ca/ostatus
Online Support
support.ca.dell.com
AutoTech (automated Hardware and Warranty Support)
toll-free: 1-800-247-9362
Customer Service
Home/Home Office
toll-free: 1-800-847-4096
Small Business
toll-free: 1-800-906-3355
Medium/Large Business, Government, Education
toll-free: 1-800-387-5757
Hardware Warranty Phone Support
XPS Computers Only
toll-free: 1-866-398-8977
Computers for Home/Home Office
toll-free: 1-800-847-4096
Computers for Small/Medium/Large Business, Government
toll-free: 1-800-387-5757
Printers, Projectors, Televisions, Handheld, Digital Jukebox, and
Wireless
1-877-335-5767
Sales
Home and Home Office Sales
toll-free: 1-800-999-3355
Small Business
toll-free: 1-800-387-5752
Medium/Large Business, Government
toll-free: 1-800-387-5755
Spare Parts and Extended Service
1 866 440 3355
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
1-877-262-5415
www.dell.com/cl
Online Support
la-techsupport@dell.com
Country Code: 56
City Code: 2
China (Xiamen)
Country Code: 86
City Code: 592
toll-free: 1230-020-3397
Sales and Customer Support
or 800-20-1385
Online Support
support.dell.com.cn
Technical Support E-mail
support.dell.com.cn/email
Customer Service E-mail
customer_cn@dell.com
Technical Support Fax
592 818 1350
Technical Support - XPS computers only
toll-free: 800 858 0540
Technical Support - Dell™ Dimension™ and Dell Inspiron™
toll-free: 800 858 2969
Technical Support - Dell OptiPlex™, Dell Latitude™, and Dell Precision™
toll-free: 800 858 0950
Technical Support - Servers and Storage
toll-free: 800 858 0960
Technical Support - Projectors, PDAs, Switches, Routers, etc.
toll-free: 800 858 2920
Technical Support - Printers
toll-free: 800 858 2311
Customer Service
toll-free: 800 858 2060
Customer Service Fax
592 818 1308
Home and Small Business
toll-free: 800 858 2222
Preferred Accounts Division
toll-free: 800 858 2557
Large Corporate Accounts GCP
toll-free: 800 858 2055
Large Corporate Accounts Key Accounts
toll-free: 800 858 2628
Large Corporate Accounts North
toll-free: 800 858 2999
Downloaded from ManualMonitor.com Manuals
Large Corporate Accounts North Government and Education
toll-free: 800 858 2955
Large Corporate Accounts East
toll-free: 800 858 2020
Large Corporate Accounts East Government and Education
toll-free: 800 858 2669
Large Corporate Accounts Queue Team
toll-free: 800 858 2572
Large Corporate Accounts South
toll-free: 800 858 2355
Large Corporate Accounts West
toll-free: 800 858 2811
Large Corporate Accounts Spare Parts
toll-free: 800 858 2621
www.dell.com/co
Colombia
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
01-800-915-4755
www.dell.com/cr
Costa Rica
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
0800-012-0231
support.euro.dell.com
Online Support
czech_dell@dell.com
Czech Republic (Prague)
Technical Support
22537 2727
International Access Code: 00
Customer Service
22537 2707
Country Code: 420
Fax
22537 2714
Technical Fax
22537 2728
Switchboard
22537 2711
Online Support
support.euro.dell.com
Technical Support for XPS computers only
7010 0074
Technical Support
7023 0182
Customer Service - Relational
7023 0184
Home/Small Business Customer Service
3287 5505
Switchboard - Relational
3287 1200
Switchboard Fax - Relational
3287 1201
Switchboard - Home/Small Business
3287 5000
Switchboard Fax - Home/Small Business
3287 5001
Denmark (Copenhagen)
International Access Code: 00
Country Code: 45
www.dell.com/dm
Dominica
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-866-278-6821
www.dell.com/do
Dominican Republic
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
1-800-156-1588
www.dell.com/ec
Online Support
la-techsupport@dell.com
Ecuador
Technical Support, Customer Service, Sales (calling from Quito)
toll-free: 999-119-877-655-3355
Technical Support, Customer Service, Sales (calling from Guayaquil)
toll-free: 1800-999-119-877-655-3355
www.dell.com/sv
El Salvador
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
800-6132
support.euro.dell.com
Online Support
Finland (Helsinki)
International Access Code: 990
Country Code: 358
City Code: 9
fi_support@dell.com
Technical Support
0207 533 555
Customer Service
0207 533 538
Switchboard
0207 533 533
Fax
0207 533 530
Sales under 500 employees
0207 533 540
Sales over 500 employees
0207 533 533
Online Support
support.euro.dell.com
Technical Support for XPS computers only
0825 387 129
Downloaded from ManualMonitor.com Manuals
Home and Small Business
Technical Support
0825 387 270
Customer Service
0825 823 833
Switchboard
0825 004 700
Switchboard (calls from outside of France)
04 99 75 40 00
International Access Code: 00
Sales
0825 004 700
Country Code: 33
Fax
0825 004 701
Fax (calls from outside of France)
04 99 75 40 01
Corporate
Technical Support
0825 004 719
Customer Service
0825 338 339
Switchboard
01 55 94 71 00
Sales
01 55 94 71 00
Fax
01 55 94 71 01
France (Paris) (Montpellier)
City Codes: (1) (4)
support.euro.dell.com
Online Support
tech_support_central_europe@dell.com
Germany (Frankfurt)
International Access Code: 00
Country Code: 49
City Code: 69
Greece
International Access Code: 00
Country Code: 30
Technical Support for XPS computers only
069 9792 7222
Technical Support
069 9792-7200
Home/Small Business Customer Service
0180-5-224400
Global Segment Customer Service
069 9792-7320
Preferred Accounts Customer Service
069 9792-7320
Large Accounts Customer Service
069 9792-7320
Public Accounts Customer Service
069 9792-7320
Switchboard
069 9792-7000
Online Support
support.euro.dell.com
Technical Support
00800-44 14 95 18
Gold Service Technical Support
00800-44 14 00 83
Switchboard
2108129810
Gold Service Switchboard
2108129811
Sales
2108129800
Fax
2108129812
www.dell.com/gd
Grenada
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-866-540-3355
www.dell.com/gt
Guatemala
Guyana
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
1-800-999-0136
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-877-270-4609
support.ap.dell.com
Online Support
support.dell.com.cn/email
Technical Support - XPS computers only
00852-3416 6923
Technical Support - Dimension and Inspiron
00852-2969 3188
Hong Kong
Technical Support - OptiPlex, Latitude, and Dell Precision
00852-2969 3191
International Access Code: 001
Technical Support - Servers and Storage
00852-2969 3196
Technical Support - Projectors, PDAs, Switches, Routers, etc.
00852-3416 0906
Customer Service
00852-3416 0910
Large Corporate Accounts
00852-3416 0907
Global Customer Programs
00852-3416 0908
Medium Business Division
00852-3416 0912
Home and Small Business Division
00852-2969 3105
Online Support
support.ap.dell.com
Portable and Desktop Support
Desktop Support E-mail
india_support_desktop@dell.com
Country Code: 852
Downloaded from ManualMonitor.com Manuals
India
Portable Support E-mail
india_support_notebook@dell.com
Phone Numbers
080-25068032 or 080-25068034
or your city STD code + 60003355
or toll-free: 1-800-425-8045
Server Support
E-mail
india_support_Server@dell.com
Phone Numbers
080-25068032 or 080-25068034
or your city STD code + 60003355
or toll-free: 1800 425 8045
Gold Support Only
E-mail
eec_ap@dell.com
Phone Numbers
080-25068033
or your city STD code + 60003355
or toll-free: 1-800-425-9045
XPS Support Only
E-mail
Indiaxps_AP@dell.com
Phone Numbers
080-25068066
or toll-free: 1-800-425-2066
Customer Service
India_care_HSB@dell.com
Home and Small Business
toll-free: 1800-4254051
India_care_REL@dell.com
Large Corporate Accounts
toll-free: 1800-4252067
Sales
Large Corporate Accounts
1600 33 8044
Home and Small Business
1600 33 8046
support.euro.dell.com
Online Support
dell_direct_support@dell.com
Technical Support
XPS computers only
1850 200 722
Business computers
1850 543 543
Home computers
1850 543 543
At Home Support
1850 200 889
Sales
Home
1850 333 200
Small Business
1850 664 656
Medium Business
1850 200 646
Large Business
1850 200 646
Sales E-mail
Dell_IRL_Outlet@dell.com
Customer Service
Home and Small Business
01 204 4014
Business (greater than 200 employees)
1850 200 982
General
Fax/Sales Fax
01 204 0103
Switchboard
01 204 4444
U.K. Customer Service (dial within U.K. only)
0870 906 0010
Corporate Customer Service (dial within U.K. only)
0870 907 4499
U.K. Sales (dial within U.K. only)
0870 907 4000
Online Support
support.euro.dell.com
Home and Small Business
Technical Support
02 577 826 90
Italy (Milan)
Customer Service
02 696 821 14
International Access Code: 00
Fax
02 696 821 13
Switchboard
02 696 821 12
Country Code: 39
Corporate
City Code: 02
Technical Support
02 577 826 90
Customer Service
02 577 825 55
Ireland (Cherrywood)
International Access Code: 00
Country Code: 353
City Code: 1
Downloaded from ManualMonitor.com Manuals
Jamaica
Japan (Kawasaki)
International Access Code: 001
Country Code: 81
City Code: 44
Fax
02 575 035 30
Switchboard
02 577 821
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales (dial from within Jamaica
only)
1-800-440-9205
Online Support
support.jp.dell.com
Technical Support - XPS computers only
toll-free: 0120-937-786
Technical Support outside of Japan - XPS computers only
81-44-520-1235
Technical Support - Dimension and Inspiron
toll-free: 0120-198-226
Technical Support outside of Japan - Dimension and Inspiron
81-44-520-1435
Technical Support - Dell Precision, OptiPlex, and Latitude
toll-free: 0120-198-433
Technical Support outside of Japan - Dell Precision, OptiPlex, and
Latitude
81-44-556-3894
Technical Support - Dell PowerApp, Dell PowerEdge, Dell
PowerConnect, and Dell PowerVault
toll-free: 0120-198-498
Technical Support outside of Japan - PowerApp, PowerEdge,
PowerConnect, and PowerVault
81-44-556-4162
Technical Support - Projectors, PDAs, Printers, Routers
toll-free: 0120-981-690
Technical Support outside of Japan - Projectors, PDAs, Printers,
Routers
81-44-556-3468
Faxbox Service
044-556-3490
24-Hour Automated Order Status Service
044-556-3801
Customer Service
044-556-4240
Business Sales Division - up to 400 employees
044-556-1465
Preferred Accounts Division Sales - over 400 employees
044-556-3433
Public Sales - government agencies, educational institutions, and medical
044-556-5963
institutions
Global Segment Japan
044-556-3469
Individual User
044-556-1657
Individual User Online Sales
044-556-2203
Individual User Real Site Sales
044-556-4649
Switchboard
044-556-4300
Online Support
support.ap.dell.com
Korea (Seoul)
Technical Support for XPS computers only
toll-free: 080-999-0283
International Access Code: 001
Technical Support, Customer Service
toll-free: 080-200-3800
Technical Support - Dimension, PDA, Electronics, and Accessories
toll-free: 080-200-3801
Country Code: 82
Sales
toll-free: 080-200-3600
City Code: 2
Fax
2194-6202
Switchboard
2194-6000
Customer Technical Support (Austin, Texas, U.S.A.)
512 728-4093
Customer Service (Austin, Texas, U.S.A.)
512 728-3619
Fax (Technical Support and Customer Service) (Austin, Texas, U.S.A.) 512 728-3883
Latin America
Sales (Austin, Texas, U.S.A.)
512 728-4397
512 728-4600
Sales Fax (Austin, Texas, U.S.A.)
or 512 728-3772
Online Support
support.euro.dell.com
Support
342 08 08 075
Home/Small Business Sales
+32 (0)2 713 15 96
Corporate Sales
26 25 77 81
Customer Service
+32 (0)2 481 91 19
Fax
26 25 77 82
Online Support
support.ap.dell.com
Technical Support - XPS computers only
toll-free: 1 800 885 784
Malaysia (Penang)
Technical Support - Dell Precision, OptiPlex, and Latitude
toll-free: 1 800 880 193
International Access Code: 00
Technical Support - Dimension, Inspiron, and Electronics and
Accessories
toll-free: 1 800 881 306
Country Code: 60
Technical Support - PowerApp, PowerEdge, PowerConnect, and
PowerVault
toll-free: 1800 881 386
Luxembourg
International Access Code: 00
Country Code: 352
Downloaded from ManualMonitor.com Manuals
City Code: 4
Customer Service
toll-free: 1800 881 306 (option 6)
Transaction Sales
toll-free: 1 800 888 202
Corporate Sales
toll-free: 1 800 888 213
www.dell.com/mx
Online Support
la-techsupport@dell.com
Technical Support
001-866-563-4425
50-81-8800
Mexico
Sales
or 001-800-888-3355
International Access Code: 00
Country Code: 52
001-877-384-8979
Customer Service
or 001-877-269-3383
50-81-8800
Main
or 001-800-888-3355
or 001-866-851-1754
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-866-278-6822
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
001-800-882-1519
Online Support
support.euro.dell.com
Technical Support for XPS computers only
020 674 45 94
Technical Support
020 674 45 00
Technical Support Fax
020 674 47 66
Home/Small Business Customer Service
020 674 42 00
International Access Code: 00
Relational Customer Service
020 674 4325
Country Code: 31
Home/Small Business Sales
020 674 55 00
Relational Sales
020 674 50 00
Home/Small Business Sales Fax
020 674 47 75
Relational Sales Fax
020 674 47 50
Switchboard
020 674 50 00
Switchboard Fax
020 674 47 50
Montserrat
Netherlands Antilles
Netherlands (Amsterdam)
City Code: 20
New Zealand
support.ap.dell.com
Online Support
support.ap.dell.com/contactus
International Access Code: 00
Country Code: 64
Technical Support for XPS computers only
toll-free: 0800 335 540
Technical Support, Customer Service, Sales
0800 441 567
www.dell.com/ni
Nicaragua
Norway (Lysaker)
International Access Code: 00
Country Code: 47
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
001-800-220-1377
Online Support
support.euro.dell.com
Technical Support for XPS computers only
815 35 043
Technical Support
671 16882
Relational Customer Service
671 17575
Home/Small Business Customer Service
23162298
Switchboard
671 16800
Fax Switchboard
671 16865
www.dell.com/pa
Panama
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
011-800-507-1264
www.dell.com/pe
Peru
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
0800-50-669
support.euro.dell.com
Online Support
Poland (Warsaw)
Downloaded from ManualMonitor.com Manuals
pl_support_tech@dell.com
International Access Code: 011
Country Code: 48
City Code: 22
Portugal
International Access Code: 00
Country Code: 351
Customer Service Phone
57 95 700
Customer Service
57 95 999
Sales
57 95 999
Customer Service Fax
57 95 806
Reception Desk Fax
57 95 998
Switchboard
57 95 999
Online Support
support.euro.dell.com
Technical Support
707200149
Customer Service
800 300 413
Sales
800 300 410 or 800 300 411 or 800 300 412 or 21
422 07 10
Fax
21 424 01 12
www.dell.com/pr
Online Support
la-techsupport@dell.com
Puerto Rico
toll-free: 1-866-390-4695
Technical Support
or 1-866-851-1760
Customer Service and Sales
1-877-537-3355
www.dell.com/kn
St. Kitts and Nevis
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-866-540-3355
www.dell.com/lc
St. Lucia
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-866-464-4352
www.dell.com/vc
St. Vincent and the
Grenadines
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
l
Singapore (Singapore)
International Access Code: 005
Country Code: 65
The phone numbers in this section should be called from within
Singapore or Malaysia only.
toll-free: 1-866-464-4353
Online Support
support.ap.dell.com
Technical Support - XPS computers only
toll-free: 1800 394 7464
Technical Support - Dimension, Inspiron, and Electronics and
Accessories
toll-free: 1 800 394 7430
Technical Support - OptiPlex, Latitude, and Dell Precision
toll-free: 1 800 394 7488
Technical Support - PowerApp, PowerEdge, PowerConnect, and
PowerVault
toll-free: 1 800 394 7478
Customer Service
toll-free: 1 800 394 7430 (option 6)
Transaction Sales
toll-free: 1 800 394 7412
Corporate Sales
toll-free: 1 800 394 7419
support.euro.dell.com
Online Support
czech_dell@dell.com
Slovakia (Prague)
Technical Support
02 5441 5727
International Access Code: 00
Customer Service
420 22537 2707
Country Code: 421
Fax
02 5441 8328
Tech Fax
02 5441 8328
Switchboard (Sales)
02 5441 7585
support.euro.dell.com
South Africa (Johannesburg)
Online Support
International Access Code:
Gold Queue
011 709 7713
09/091
Technical Support
011 709 7710
Customer Service
011 709 7707
Country Code: 27
Sales
011 709 7700
City Code: 11
Fax
011 706 0495
Switchboard
011 709 7700
dell_za_support@dell.com
Downloaded from ManualMonitor.com Manuals
Southeast Asian and Pacific
Countries
Technical Support, Customer Service, and Sales (Penang, Malaysia)
604 633 4810
Online Support
support.euro.dell.com
Home and Small Business
Technical Support
902 100 130
Customer Service
902 118 540
Sales
902 118 541
International Access Code: 00
Switchboard
902 118 541
Country Code: 34
Fax
902 118 539
Corporate
Technical Support
902 100 130
Customer Service
902 115 236
Switchboard
91 722 92 00
Fax
91 722 95 83
Online Support
support.euro.dell.com
Technical Support for XPS computers only
77 134 03 40
Technical Support
08 590 05 199
International Access Code: 00
Relational Customer Service
08 590 05 642
Country Code: 46
Home/Small Business Customer Service
08 587 70 527
Employee Purchase Program (EPP) Support
020 140 14 44
Technical Support Fax
08 590 05 594
Sales
08 587 705 81
Spain (Madrid)
City Code: 91
Sweden (Upplands Vasby)
City Code: 8
support.euro.dell.com
Online Support
Tech_support_central_Europe@dell.com
Switzerland (Geneva)
International Access Code: 00
Country Code: 41
City Code: 22
Technical Support for XPS computers only
0848 338 857
Technical Support - Home and Small Business
0844 811 411
Technical Support - Corporate
0844 822 844
Customer Service - Home and Small Business
0848 802 202
Customer Service - Corporate
0848 821 721
Main
0848 335 599
Fax
022 799 01 90
Sales
022 799 01 01
support.ap.dell.com
Online Support
support.dell.com.cn/email
Taiwan
International Access Code: 002
Technical Support - XPS computers only
toll-free: 0080 186 3085
Technical Support - OptiPlex, Latitude, Inspiron, Dimension, and
Electronics and Accessories
toll-free: 0080 186 1011
Technical Support - Servers and Storage
toll-free: 0080 160 1256
Customer Service
toll-free: 0080 160 1250
(option 5)
Transaction Sales
toll-free: 0080 165 1228
Corporate Sales
toll-free: 0080 165 1227
Online Support
support.ap.dell.com
Technical Support (OptiPlex, Latitude, and Dell Precision)
toll-free: 1800 0060 07
Technical Support (PowerApp, PowerEdge, PowerConnect, and
PowerVault)
toll-free: 1800 0600 09
Customer Service
toll-free: 1800 006 007
(option 7)
Corporate Sales
toll-free: 1800 006 009
Transaction Sales
toll-free: 1800 006 006
Country Code: 886
Thailand
International Access Code: 001
Country Code: 66
www.dell.com/tt
Trinidad/Tobago
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-888-799-5908
www.dell.com/tc
Turks and Caicos Islands
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
Downloaded from ManualMonitor.com Manuals
toll-free: 1-877-441-4735
support.euro.dell.com
Online Support
dell_direct_support@dell.com
Customer Service Online support.euro.dell.com/uk/en/ECare/form/home.asp
U.K. (Bracknell)
International Access Code: 00
Country Code: 44
City Code: 1344
Sales
Home and Small Business Sales
0870 907 4000
Corporate/Public Sector Sales
01344 860 456
Customer Service
Home and Small Business
0870 906 0010
Corporate
01344 373 185
Preferred Accounts (500-5000 employees)
0870 906 0010
Global Accounts
01344 373 186
Central Government
01344 373 193
Local Government & Education
01344 373 199
Health
01344 373 194
Technical Support
XPS Computers Only
0870 366 4180
Corporate/Preferred Accounts/PCA (1000+ employees)
0870 908 0500
Other Dell Products
0870 353 0800
General
Home and Small Business Fax
0870 907 4006
www.dell.com/uy
Uruguay
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 000-413-598-2521
toll-free: 1-877-DELLTTY
Dell Services for the Deaf, Hard-of-Hearing, or Speech-Impaired
(1-877-335-5889)
Fax
toll-free: 1-800-727-8320
Technical Support
support.dell.com
XPS
toll-free: 1-800-232-8544
Home and Home Office
toll-free: 1-800-624-9896
Portable and Desktop AutoTech
toll-free: 1-800-247-9362
Small Business
toll-free: 1-800-456-3355
Medium and Large Business
toll-free: 1-877-671-3355
State and Local Government
toll-free: 1-800-981-3355
Federal Government
toll-free: 1-800-727-1100
Healthcare
toll-free: 1-800-274-1550
K-12 Education
toll-free: 1-888-977-3355
Higher Education
toll-free: 1-800-274-7799
Printers, Projectors, PDAs, and MP3 Players
toll-free: 1-877-459-7298
International Access Code: 011
Customer Service
toll-free: 1-800-624-9897
Country Code: 1
Automated Order Status
toll-free: 1-800-433-9014
Small Business
toll-free: 1-800-456-3355
Medium and Large Business
toll-free: 1-877-671-3355
State and Local Government
toll-free: 1-800-981-3355
Federal Government
toll-free: 1-800-727-1100
Healthcare
toll-free: 1-800-274-1550
K-12 Education
toll-free: 1-888-977-3355
Higher Education
toll-free: 1-800-274-7799
Employee Purchase Program (EPP)
toll-free: 1-800-695-8133
Financial Services
www.dellfinancialservices.com
Leases and Loans
toll-free: 1-877-577-3355
Dell Preferred Accounts (DPA)
toll-free: 1-800-283-2210
Sales
1-800-289-3355 or 1-800-879-3355
Dell Outlet Store
toll-free: 1-888-798-7561
Software and Peripherals Sales
toll-free: 1-800-671-3355
U.S.A. (Austin, Texas)
www.dell.com/vi
Downloaded from ManualMonitor.com Manuals
U.S. Virgin Islands
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
toll-free: 1-877-702-4360
www.dell.com/ve
Venezuela
Online Support
la-techsupport@dell.com
Technical Support, Customer Service, Sales
0800-100-4752
NOTE: PDF files require Adobe® Acrobat® Reader®, which can be downloaded from the Adobe website at www.adobe.com .
To view a PDF file, launch Acrobat Reader. Click File® Open and select the PDF file.
Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
Setting Up Your Monitor
Dell 2707WFP Flat Panel Monitor User's Guide
If you have a Dell desktop with no internet access
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced. if you are using Windows XP, click the Adapter tab.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Follow the directions listed below for your identified Graphics Adapter:
o ATI: 1. ATI Folder on the CD (RADEON & RAGE family only; excludes mobile and FireGL platforms).
2. Run the installation by double clicking the executable file.
3. After installing the drivers, attempt to set the resolution to 1920x1200 again.
o NVidia:
1. NVidia folder on the CD (GEFORCE & TNT2 family only; excludes mobile and QUADRO chipsets).
2. Run the installation by double clicking the executable file.
3. After installing the drivers, attempt to set the resolution to 1920x1200 again.
NOTE: If you are unable to set the resolution to 1920x1200, please contact Dell to inquire about a Graphics Adapter that supports these resolutions. Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
Setting Up Your Monitor
Dell 2707WFP Flat Panel Monitor User's Guide
If you have a Dell desktop or a Dell portable computer with internet access
1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200again.
NOTE: If you are unable to set the resolution to 1920x1200, please contact Dell to inquire about a Graphics Adapter that supports these resolutions. Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
Setting Up Your Monitor
Dell 2707WFP Flat Panel Monitor User's Guide
If you have non Dell desktop, portable computer, or graphic card
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5.Please refer to the graphic card provider website for updated driver (for example, http://www.ATI.comOR http://www.NVIDIA.com ).
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to1920x1200 again.
NOTE: If you are unable to set the resolution to 1920x1200, please contact the manufacturer of your computer or consider purchasing a graphics adapter that will
support the video resolution of 1920x1200. Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
Setting the Optimal Resolution
Dell 2707WFP Flat Panel Monitor User's Guide
Important instructions and graphic drivers to set the display resolution to 1920x1200 (Optimal)
For optimal display performance while using the Microsoft Windows® operating systems, set the display resolution to 1920 x 1200 pixels by performing the following
steps:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1920x1200.
4. Click OK.
If you do not see 1920x1200 as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the computer system
you are using, and follow the provided directions:
1: If you have a Dell desktop with no internet access.
2: If you have a Dell desktop or a Dell portable computer with internet access.
3: If you have non Dell desktop, portable computer, or graphic card.
Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Dell 2707WFP Flat Panel Monitor User Guide
Important instructions and graphic drivers to set the display resolution to 1920x1200 (Optimal) Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, and Dell
OpenManage are trademarks of Dell Inc; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; Adobe is a trademark of
Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection
Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2707WFP
June 2007 P/N 70GXXX-XXX Rev. A01
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
Setting Up Your Monitor
Dell 2707WFP Flat Panel Monitor User's Guide
Connecting Your Monitor
Using the Front Panel Buttons
Using the OSD
Using the Dell Soundbar (Optional)
Connecting Your Monitor
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
Downloaded from ManualMonitor.com Manuals
1
AC power cord connector
2
DC power connector for Dell Soundbar
3
DVI connector
4
VGA connector
5
Composite video connector
6
Component video connector - Y
7
S-Video connector
8
USB upstream port
9
USB downstream ports
10
Component video connector - Pb
11
Component video connector - Pr
To connect your monitor to the computer, perform the following steps/instructions.
l
l
l
l
l
l
l
Turn off your computer, and disconnect the power cable. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer. The only case in which both cables can be used is if they are connected to two different computers with appropriate
video systems. (Graphics are for illustration only. System appearance may vary). Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer .
Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See rear or bottom view for details.)
Plug the power cables for your computer and monitor into a nearby outlet. Turn on the monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
Use the cable holder on the monitor stand to neatly organize the cables.
NOTE: If your computer does not support the DVI connector, you can leave the cable unconnected or remove it.
NOTE: For USB peripherals already connected to your computer, changing the USB connection to your monitor is not necessary.
Using the Front Panel Buttons
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD
shows their numeric values as they change.
A
Use Input Source Select button to select between five different video signals that may be connected to your monitor.
Input Source Select
1.
2.
3.
4.
5.
VGA input
DVI-D input
S- Video input
Composite video input
Component video input As you cycle through the inputs you will see the following messages to indicate currently selected input source. It may take 1 or 2 seconds for the
image to appear.
OR
Downloaded from ManualMonitor.com Manuals
OR
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.
OR
If either S-Video or Composite input is selected and both cables are not connected or the video source is turned off, the screen does not have an
image. If any button is pressed (except power button), the monitor displays the following message:
B
Use this button to activate PIP (Picture-in-Picture) / PBP (Picture-by-Picture) modes adjustment.
Pressing this button continually cycles the monitor through the following modes : OFF-->PIP-->PBP. You will see the following messages
corresponding to the mode selected.
PIP / PBP Select
C
→
The MENU button is used to launch the on-screen display(OSD) and select the OSD Menu. See Accessing the Menu System.
OSD Menu / Select
D
Use this button for direct access to the "Brightness" and "Contrast" control menu.
Brightness/Contrast
Hot Key
D
,E
Use these buttons for navigating and adjusting the slider-bar(decrease/increase ranges) controls in the OSD.
Down (-) and Up (+)
E
Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self-adjusts to the
current input:
Auto Adjust
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor
by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
NOTE: Auto Adjust will not occur if you press the button while there are no active video input signals or attached cables
Downloaded from ManualMonitor.com Manuals
F
The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
The Power button turns the monitor on and off.
Power button
(with power light indicator)
Using the OSD
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for PC (Analog (VGA), Digital (DVI-D)) Input
Or
Main Menu for Non PC (Analog (VGA), Digital (DVI-D)) Input
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.
2. Push the
and
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table for a
complete list of all the options available for the monitor.
3. Push the MENU button once to activate the highlighted option. 4. Push and
button to select the desired parameter.
5. Push MENU to enter the slide bar and then use the and
buttons, according to the indicators on the menu, to make your changes.
6. Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon
Menu and Submenus
Description
EXIT
Select to exit the main menu.
BRIGHTNESS
CONTRAST
This menu is to activate Brightness/Contrast adjustment.
Downloaded from ManualMonitor.com Manuals
Back
Push
to go back to the main menu.
Brightness Brightness adjusts the luminance of the backlight.
Push the
button to increase brightness and push the
Contrast
Exit Menu
button to decrease brightness (min 0 ~ max 100).
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the
button to increase contrast and push the
button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
to exit the OSD main menu.
Push
AUTO ADJUST
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particula
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT SOURCE
The INPUT SOURCE menu is to select between different video signals that may be connected to your monitor.
Back
Push
to go back to the main menu.
VGA Select VGA input when you are using the analog (VGA) connector. Push
DVI-D
Select DVI-D input when you are using the Digital (DVI) connector. Push
S-Video Select S-Video input when you are using S-Video connector. Push
Downloaded from ManualMonitor.com Manuals
to select the VGA input source.
to select the DVI input source.
to select the S-Video input source.
Composite Select Composite input when you are using composite video connector. Push
Component Select Component input when you are using component video connector. Push
Scan for Sources Push
Exit Menu
to select the composite input source.
to select the component input source.
to scan for available input signals.
to exit the OSD main menu.
Push
COLOR SETTINGS
Color Settings adjusts the color setting mode and color temperature.
There are different color setting sub-menus for VGA/DVI-D and Video input.
Color setting submenu for VGA/DVI-D input
BACK
Push
to go back to the main menu.
Color Settings Mode
(VGA/DVI-D) To achieve the different color mode for PC and Mac.
Color Adjustment
PC Blue: PC Blue is selected to obtain a bluish tint. This color setting is typically used for text based applications (Spreadsheets, Programming, Text E
PC Red: Red Preset is selected to obtain a redder tint. This color setting is typically used for color intensive applications (Photograph Image Editing, M
PC Custom: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from
NOTE:Color temperature is a measure of the 'warmth' of the image colors (red/green/blue). The two available presets ('Blue' and 'Red') favor blue
Select each one to see how each range suits your eye or utilize the 'Custom Color' option to customize the color settings to your exact choice.
Color setting submenu for Video/DVI-HD input
Downloaded from ManualMonitor.com Manuals
Color Format To achieve the different color domain for PC RGB and HD YPbPr (HD YPbPr is suitable for HD video playback over DVI. PC RGB is suitable for n
(Video/DVI-HD) over DVI.)
Hue This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use
makes video image shade into greenish
makes video image shade into purplish
NOTE: Hue adjustment only available for video input.
Saturation
This feature can adjust the color saturation of the video image. Use
or
to adjust the saturation from '0' to '100'.
makes video image looks more monochrome
makes video image looks more colorful
NOTE:Saturation adjustment only available for video input.
Color Reset Return your monitor color settings to those that were set at the time of manufacture
Exit Menu
Push
to exit the OSD main menu
IMAGE MODES
Image mode submenu for Video input
Standard Mode suitable for Video playback.
Vivid Mode suitable for movie playback./span>
Exit Menu
Push
to exit the OSD main menu.
DISPLAY SETTINGS
Display settings submenu for VGA/DVI-D input Downloaded from ManualMonitor.com Manuals
Back
Push
to go back to the main menu.
Wide Mode Adjust the image ratio as 1:1, aspect(16:10) or full screen.
H Position Use the
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
V Position
and
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
Use the
Sharpness This feature can make the image look sharper or softer. Use
or
to adjust the sharpness from '0' to '100' .
Zoom Use the Zoom function to zoom in to specific area of interest.
Use the
and
keys to zoom in and out.
Horizontal Pan After zooming in, the horizontal and vertical pan function allows you to pan the enlarged image left/right and up/down respectively.
Vertical Pan Use the
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the
and
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
Pixel Clock
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu
Settings'.
Use the
and
buttons to adjust for best image quality.
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again. Audio Option
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
To turn on or off Audio Power during Power Save mode.
Display Info All the settings related to this monitor.
Display
Exit Menu
Reset the image to the original factory setting.
Push
MENU SETTINGS
Downloaded from ManualMonitor.com Manuals
to exit the OSD main menu.
Back
Language
Push
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
Menu Horizontal
Position
Menu Vertical Position
Menu Timer
and
buttons move OSD left and right.
and
buttons move OSD up and down.
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the
Transparency
Menu Lock
to go back to the main menu.
and
buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
This function is used to adjust the OSD background from opaque to transparent.
Controls user access to adjustments. When
is selected, no user adjustments are allowed. All buttons are locked except the menu NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with
allow user access to all applicable settings.
NOTE: You can also lock or unlock the OSD by pushing and holding the Menu button for 15 seconds.
Factory Reset
DDC/CI
Reset all OSD settings to the factory preset values. DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on
this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
Exit Menu
Push
to exit the OSD main menu.
PIP SETTINGS
This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF(main source is VGA/DVI-D PIP/PBP submenu when PIP/PBP OFF(main source is Video input)
input)
Downloaded from ManualMonitor.com Manuals
OR PIP/PBP submenu when PIP/PBP ON (main source is VGA/DVI-D
input) Back
PIP/PBP submenu when PIP/PBP ON(main source is Video input
OR Push
to go back to the main menu.
Mode There are two modes: PIP (Picture in Picture) and PBP (Picture By Picture)
Use and to browse and to select "Off", "PIP" or "PBP".
When PIP/PBP activated When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.
PIP/PBP Source Select an input signal for PIP/PBP. (VGA/DVI/S-Video/Composite/Component)
Use and to browse and to select.
PIP Position Select PIP window position.
Use and to browse and PIP Size Select PIP window size.
Use and to browse and to select.
to select.
PIP/PBP Contrast Adjust the contrast level of the picture in PIP/PBP Mode.
reduce the contrast
increas the contrast
PIP/PBP Hue/Tint
This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
shifts image color towards purple
PIP/PBP Saturation Adjust the color saturation of PIP/PBP image.
makes the image look more monochrome
makes the image look more colorful
Exit Menu
Push
to exit the OSD main menu.
OSD Warning Messages
When the monitor does not support a particular resolution mode you will see the following message :
Downloaded from ManualMonitor.com Manuals
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and
Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 X 1200.
You will see the following message before the DDC/CI function is disabled. When monitor enters Power Save mode, the following message appears : Activate the computer and wake up the monitor to gain access to the OSD
If you press any button other than the power button one of the following messages will appear depending on the selected input:
VGA / DVI-D input
Video Input
OR
In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input as
long as the OSD screen is closed.
1. VGA 2. DVI-D
OR 3. S-Video
OR
4. Composite
OR
OR If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.
OR NOTE: When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please enter PIP /PBP submenu to bring back the PIP/PBPwindow.
NOTE: The PIP/PBP functions can bring up a picture from a second image source. Thus you can watch images from 1 PC source (D-Sub or DVI) and 1 Video Source (Composite or S
functions will not allow for 2 PC sources or 2 Video sources to perform PIP/PBP.
See Solving Problems for more information.
Using the Dell Soundbar (Optional)
Downloaded from ManualMonitor.com Manuals
1.
Attach mechanism
2.
Headphone connectors
3. Power indicator
4.
Power/Volume control
Soundbar Attachment to the Monitor
NOTE: Soundbar Power Connector - 12V DC output is for optional Dell Soundbar only.
NOTICE: Do not use with any device other than Dell Soundbar.
1.
Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4.
Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Back to Contents Page
Solving Problems
Dell 2707WFP Flat Panel Monitor User's Guide
Monitor Specific Troubleshooting
Common Problems
Video Problems
Product Specific Problems
Universal Serial Bus (USB) Specific Problems
Dell Soundbar (Optional) Troubleshooting
Card Reader Troubleshooting
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
Monitor Specific Troubleshooting
Self-Test Feature Check
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected
but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue
connector) cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in
self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the
screen.
or 4. This box also appears during normal system operation if the video cable becomes disconnected or damaged.
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system, because your monitor is functioning
properly.
NOTE: Self test feature check is not available for S-Video, Composite, and Component video modes.
Common Problems
The following table contains general information about common monitor problems you might encounter.
COMMON
SYMPTOMS
WHAT YOU
EXPERIENCE
Downloaded from ManualMonitor.com Manuals
POSSIBLE SOLUTIONS
No Video/ Power
LED off
No picture
l
l
l
No Video/ Power
LED on
No picture or no
brightness
l
l
l
Poor Focus
Picture is fuzzy,
blurry or ghosting
l
l
l
l
l
Shaky/Jittery Video
Wavy picture or
fine movement
l
l
l
l
l
Missing Pixels
Stuck-on Pixels
Brightness Problems
LCD screen has
spots
l
LCD screen has
bright spots
l
Picture too dim or
too bright
l
l
l
l
l
Geometric Distortion
Screen not
centered correctly
l
l
l
l
Check connection integrity at both ends of the video cable
Electric outlet verification
Ensure power button is depressed fully
Increase brightness and contrast controls via OSD
Perform monitor self-test feature check
Check for bent or broken pins
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Eliminate video extension cables
Perform monitor reset
Lower video resolution or increase font size
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor reset
Check environmental factors
Relocate and test in another room
Cycle power on-off
These are pixels that are permanently off and is a natural defect that occurs in LCD technology
Cycle power on-off
These are pixels that are permanently on and is a natural defect that occurs in LCD technology
Perform monitor reset on "Factory Reset"
Auto Adjust via OSD
Adjust brightness and contrast controls via OSD
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust brightness and contrast controls via OSD
Ensure monitor is in proper video mode
NOTE: When using '2: DVI-D', the positioning adjustments are not available.
Horizontal/Vertical
Lines
Screen has one or
more lines
l
l
l
l
l
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor self-test feature check and determine if these lines are also in self-test mode
Check for bent or broken pins
NOTE: When using '2: DVI-D', the Pixel Clock and Phase adjustments are not available.
Sync Problems
Screen is
scrambled or
appears torn
l
l
l
l
l
l
LCD Scratched
Safety Related Issues
Intermittent Problems
Screen has
scratches or
smudges
l
Visible signs of
smoke or sparks
l
Monitor
malfunctions on &
off
l
l
l
l
l
l
Missing Color
Picture missing
color
l
l
l
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode
Check for bent or broken pins
Boot up in the "safe mode"
Turn monitor off and clean the screen
For cleaning instruction, see Caring for Your Monitor.
Do not perform any troubleshooting steps
Monitor needs to be replaced
Ensure monitor is in proper video mode
Ensure video cable connection to computer and to the flat panel is secure
Perform monitor reset on "Factory Reset"
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode
Perform monitor self-test feature check
Check connection integrity at both end of the video cable
Check for bent or broken pins
Downloaded from ManualMonitor.com Manuals
Wrong Color
Image retention from a static image left on
the monitor for a long period of time
Picture color not
good
Faint shadow from
the static image
displayed appears
on the screen
l
Change the color to "PC Custom Color" or "MAC Custom Color"
Adjust R/G/B value of "PC Custom Color" or "MAC Custom Color"
Change the Color Format to "PC RGB" or "YPbPr" (for Video/DVI-HD inputs)
l
Use the Power Management feature to turn off the monitor at all times when not in use
l
Alternatively, use a dynamically changing screen saver
l
l
Video Problems
COMMON
SYMPTOMS
No Video
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
No signal indicator is displayed
l
Check Video Input Selection
¡ Composite: Yellow colored RCA jack
¡ S-Video: Typically a round 4 pin jack
¡ Component: Red, Blue, Green colored RCA jacks Low Quality DVD
playback
Picture not crisp and some color
distortion
l
Check DVD connection
¡ Composite gives good picture
¡ S-Video gives better picture
¡ Component: Red, Blue, Green colored RCA jacks
Blinking Video
Video is blinking or discontinuous
l
Check DVD connection
¡ Composite gives good picture
¡ S-Video gives better picture
¡ Component: Red, Blue, Green colored RCA jacks Check if DVD player is HDCP compliant.
¡ Some non-compliant players may exhibit blinking video and others will display a
raster scree
l
NOTE: When choosing S-Video, Composite or Component video, Auto Adjust function is not available.
Product Specific Problems
SPECIFIC SYMPTOMS
WHAT YOU EXPERIENCE
Screen image is too small
Image is centered on screen, but does not fill entire
viewing area
Cannot adjust the monitor with the OSD does not appear on the screen
buttons on the front panel
POSSIBLE SOLUTIONS
l
Perform monitor reset on "Factory Reset"
l
Turn the monitor off and unplug the power
cord and then plug back and power on
The monitor will not go into
power saving mode.
No picture, the LED light is green. When press “+”, “” or “Menu” key, the message “ No S-Video input
signal ”, “ No Composite input signal ” or “ No
Component input signal ” will appear.
l
Move mouse or hit any key on the keyboard
on the computer or activate video player, then access the OSD to set Audio to “ off ”
state.
No Input Signal when user
controls pressed
No picture, the LED light is green. When press “+”, “” or “Menu” key, the message “ No S-Video input
signal ”, “ No Composite input signal ” or “ No
Component input signal ” will appear.
l
Check the signal source. Make sure the
computer is not in power saving by moving
mouse or pressing any key on the keyboard.
Check to make sure Video Source to SVideo, Composite or Component is powered
and playing video media.
Check whether the signal cable is plugged in
and seated properly. Re-plug the signal cable
if necessary.
Re-boot the computer or video player.
l
l
l
Downloaded from ManualMonitor.com Manuals
The monitor will not fill the entire
screen.
The picture can’t fill the height or width of the screen.
l
Due to the non-standard formats of DVDs,
the monitor may not show the full screen
pictures.
NOTE: When choosing DVI-D mode, Auto Adjust function is not available.
Universal Serial Bus (USB) Specific Problems
SPECIFIC SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
USB interface is not working
USB peripherals are not working
l
l
l
l
l
High Speed USB 2.0 interface is
slow.
High Speed USB 2.0 peripherals working slowly or
not at all.
l
l
l
l
l
Check that your monitor is powered ON.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector). Switch off and then turn on the monitor again.
Reboot the computer.
Check that your computer is USB 2.0 capable.
Verify USB 2.0 source on your computer.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector). Reboot the computer.
Dell Soundbar (Optional) Troubleshooting
COMMON
SYMPTOMS
No Sound
WHAT YOU EXPERIENCE
No power to Soundbar - the
power indicator is off.
(built-in DC power supply. i.e.
2707WFP)
POSSIBLE SOLUTIONS
l
l
l
l
No Sound
Soundbar has power - power
indicator is on.
l
l
l
l
l
l
Distorted Sound
Computer's sound card is used as
the audio source.
l
l
l
l
l
l
l
l
Distorted Sound
Other audio source is used.
l
l
l
l
l
Unbalanced Sound
Output
Sound from only one side of
Soundbar.
Downloaded from ManualMonitor.com Manuals
l
l
Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the
power indicator (green LED) on the front of the Soundbar is illuminated.
Confirm that the power cable from the Soundbar is plugged into the monitor.
Confirm that the monitor has power.
If the monitor has no power, see Monitor Specific Troubleshooting for monitor common
problem.
Plug the audio line-in cable into the computer's audio out jack.
Set all Windows volume controls to their maximum.
Play some audio content on the computer (i.e. audio CD, or MP3).
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
Clean and reseat the audio line-in plug.
Test the Soundbar using another audio source (i.e. portable CD player).
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
Set all Windows volume controls to their midpoints.
Decrease the volume of the audio application.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (i.e. portable CD player).
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the audio source.
Decrease the volume of the audio source.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio
source.
l
l
l
l
Low Volume
Volume is too low.
l
l
l
l
l
Set all Windows audio balance controls (L-R) to their midpoints.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (i.e. portable CD player).
Clear any obstructions between the Soundbar and the user.
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
Set all Windows volume controls to their maximum.
Increase the volume of the audio application.
Test the Soundbar using another audio source (i.e. portable CD player).
Card Reader Troubleshooting
NOTICE: Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.
Problem
Cause
Solution
A. Right-click My Computer on the desktop, and
then click Manage. Under Computer
Management, click Desk Management.
Drive letter is not assigned.
(Windows XP only)
Conflict with network drive letter.
B. In the list of drives in the right panel, right-click
Removable Device and then click Change Drive
Letter and Paths.
C. Click Change, and in the drop-down box,
specify a drive letter for the Removable Device,
choosing one that is not assigned to the mapped
network drives.
D. Click OK, and then click OK again.
Drive letter is assigned, but the media
is not accessible
The media needs reformatting.
Right-click the drive in Explorer and choose Format
from the resulting menu.
Displays the error message, "Error copying file or folder."
Reinsert the media and write or erase again.
The media has been ejected during
writing or erasing.
Displays the error message, "Cannot write folder (folder name) or
file (file name)," during writing, or, "Cannot remove folder (folder
name) or file(file name),". While erasing, you cannot write or erase
in the same folder or file name.
Format the media for writing or erasing the same
folder or file name.
Despite the disappearance of the
pop-up window, the media has been
ejected while the LED was blinking.
Although the pop-up window disappears during writing, if you eject
your media while the LED is still blinking, then you cannot complete
your action on the media.
Format the media for writing or erasing the same
folder or file name.
Cannot format or write on the media.
Write protect switch is enabled.
Back to Contents Page
Downloaded from ManualMonitor.com Manuals
Verify that the write- protect switch of the media is
unlocked.
Back to Contents Page
Using Your Adjustable Monitor Stand
Dell™ 2707WFP Flat Panel Monitor User's Guide
Organizing Your Cables
Using the Tilt, Swivel and Vertical Extension
Organizing Your Cables
1. Hold the cable cover firmly and press it slightly against the stand. Slide the cable cover upward to remove it from the stand.
2. Route the cables through the hole at the bottom of the stand and connect them to their respective connectors. Arrange the cables with the cable clips on
the stand.
3. Reattach the cable cover by positioning and sliding it to its original position.
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment, use the cable management hole
to neatly organize all cables as shown above.
Downloaded from ManualMonitor.com Manuals
Using the Tilt, Swivel and Vertical Extension
Tilt/Swivel
With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle.
Vertical Extension
Stand extends vertically up to 90mm.
Back to Contents Page
Downloaded from ManualMonitor.com Manuals