Craftsman 320.27990 Operator`s manual

Operator's
Manual
I I:RAFTSMAN°I
8A Impact Wrench
Model No. 320.27990
!-_
C_US
• WARRANTY
• SAFETY
WARNING:To
reduce the risk of
injury, the user must read and
understand the Operator's manual
before using this product.
• UNPACKING
• DESCRIPTION
• OPERATION
• MAINTENANCE
• TROUBLESHOOTING
• ESPANOL
Sears Brands Management
www.craftsman.com
Corporation,
Hoffman
Estates,
IL 60179
U.S.A.
iII_
=[e_[_e__]
Warranty
page 2
Safety Symbols
page 3
Safety Instructions
page 5-8
Unpacking
page 9
Description
page 10-11
Operation
page 12-14
Maintenance
page 15
Troubleshooting
page 16
Exploded
page 17-20
View and Part List
Sears Repair Parts Phone Number
CRAFTSMAN
Back Cover
ONE YEAR LIMITED WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted
against any defects in material or workmanship. With proof of
purchase, defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement,
web site: www.craftsman.com
visit the
This warranty is void if this product is ever used while providing
commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Sears Brands Management
Corporation,
Hoffman Estates, IL 60179
A
WARNING: Some dust created by using power tools contains chemicals
known to the state of California to cause cancer and birth defects or other reproductive
harm.
SAVE THESE
INSTRUCTIONS!
READ ALL INSTRUCTIONS!
This Impact Wrench has many features for making its use more pleasant and
enjoyable. Safety, performance, and dependability
have been given top priority
in the design of this product, making it easy to maintain and operate.
27990
ManuaLRevised_lO
±202
Page 2
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols
and the explanations
with them deserve your careful
attention and understanding.
The warnings do not, by themselves, eliminate any
danger. The instructions
and warnings they give are no substitutes
for proper
accident prevention measures.
A_, WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including all safety alert symbols such as "DANGER,"
"WARNING,"
and "CAUTION,"
before using this Impact Wrench. Failure to follow all
instructions listed in this manual may result in electric shock, fire, and/or serious
personal injury.
SYMBOL
_,
MEANNING
SAFETY
ALERT SYMBOL:
May be used in conjunction
DANGER:
Indicates DANGER,
with other symbols
WARNING,
Failure to obey this safety warning will result in death or serious
injury to you or to others. Always follow the safety precautions
of fire, electric shock, and personal injury.
A_, WARNING:
CAUTION:
WARNING:
to reduce the risk
Failure to obey this safety warning may result in death or serious
injury to you or to others. Always follow the safety precautions
of fire, electric shock, and personal injury.
_,
to reduce the risk
Failure to obey this safety warning can result in death or serious
injury to you or to others. Always follow the safety precautions
of fire, electric shock, and personal injury.
_,
OR CAUTION.
or pictographs.
To ensure safety and reliability,
to reduce the risk
all repairs should
be performed
at a Sears Parts & Repair Service Center.
DAMAGE PREVENTION AND INFORMATION
MESSAGES
These messages inform the user of important information and/or instructions
that could lead to equipment or other property damage if they are not followed.
Each message is preceded by the word "NOTE" as in the example below.
NOTE: Equipment and/or property damage may result if these instructions
are not followed.
_,
WARNING:
The operation
of any power tool can result in foreign objects
being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a
full-face shield when needed. We recommend a Wide Vision
Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1
27990
ManuaLRevised_10
1202
Page 3
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation
of these symbols will allow you to
operate the tool better and more safely.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency
W
Watt
Power
rain
Minutes
Alternating
---==
Direct
no
Class
.../rain
Current
Current
Rotational
Per Minute
Read The Operator's
Safety
_lb
No Hands
No Hands
Double-insulated
at no load
construction
Alert
Manual
locations.
Do not expose
speed,
to rain or use in damp
read and understand
operator's
manual
To reduce the risk of injury, user must
before using this product.
glasses with side shields and a full face
Always
wear operating
safety goggles
or safety
shield when
this product.
Precautions
Symbol
blade
in serious
Failure will
to result
keep your
hands personal
away frominjury.
the
Symbol
that involve
your safety,
Alert
Failure will
blade
to result
keep your
in serious
hands personal
away frominjury.
the
No Hands
Symbol
blade
in serious
Failure will
to result
keep your
hands personal
away frominjury.
the
No Hands
Symbol
blade
in serious
Failure will
to result
keep your
hands personal
away frominjury.
the
Hot Surface
27990 ManuaLRevised_lO
speed,
of current
Revolutions,
strokes, surface
orbits, etc., per minute
Eye Protection
O
Type of current
Type or a characteristic
II Construction
Wet Conditions
per second)
Time
No Load Speed
]
(cycles
1202
To reduce
avoid
contact
the with
risk of
anyinjury
hot surface.
or damage,
Page 4
A_, WARNING:
Be sure to read and understand
all instructions
before using the Impact Wrench. Failure to follow all instructions
may result in electric shock, fire, and/or serious personal injury.
in this manual
listed below
_, WARNING: Do not attempt to operate this tool until you have thoroughly
read all instructions, safety rules, and warnings. Failure to comply with them can
result in fire, electric shock, or serious personal injury. Save the manual and refer
to it frequently.
GENERAL SAFETY PRECAUTIONS
_, WARNING: Read all safety warnings and instructions. Failureto follow
the warnings and instructions may result in electric shock, fire and/or serious
personal injury.
Save all warnings
and instructions
for future
reference.
The term "power tool" in all of warnings refers to your mains-operated
power tool or battery-operated
(cordless) power tool.
(corded)
WORK AREA SAFETY
•
Keep your work
accidents.
area
clean
and well lit. Cluttered
or dark
areas invite
Do not operate power tools in explosive environments, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks,
which may ignite the dust or fumes.
Keep children and bystanders away while operating
Distractions may cause you to lose control.
a power tool.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will reduce the risk of electric shock.
Avoid body contact with grounded surfaces,
ranges, and refrigerators.
There is an increased
body is grounded.
such as pipes, radiators,
risk of electric shock if your
Do not expose power tools to rain or wet conditions.
power tool will increase the risk of electric shock.
Water entering
a
Do not abuse the cord. Never use the cord for carrying, pulling, or
unplugging the power tool. Keep the cord away from heat, oil, sharp
edges, or moving parts. Damaged or entangled cords increase the risk of
electric shock.
27990
ManuaLRevised_lO
1202
Page 5
•
When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
•
If operating
a power tool in a damp location
ground fault circuit interrupter (GFCI) protected
GFCI reduces the risk of electric shock.
is unavoidable,
use a
power supply. Use of a
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use the power tool while tired or under
the influence of drugs, alcohol, or medication. A moment of inattention
while operating power tools may result in serious personal injury.
Use personal
protective
equipment.
Always wear eye protection.
Protective equipment,
such as dust mask, non-skid safety shoes, hard hat,
or hearing protection,
used for appropriate
conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure that the switch is in the OFF
position before connecting to a power source and/or battery, picking
up, or carrying the tool. Carrying power tools with your finger on the switch
or energizing power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and
collection facilities, ensure that these are connected and properly used.
Use of these devices can reduce dust-related hazards.
POWER TOOL USE AND CARE
•
Do not force
the power tool. Use the correct
power tool for your
application. The correct power tool will do the job better and more safely at
the rate for which it was designated.
•
Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
•
Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments,
changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
27990
ManuaLRevised_lO
1202
Page 6
•
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment
or binding of moving
parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories,
blades, etc. in accordance
with these
instructions
and in the manner intended
for the particular
type of
power tool, taking into account the working conditions
and the work
to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
_, WARNING: When using power tools, basic safety precautions
be followed to reduce the risk of fire, electric shock, and personal
should always
injury.
_, WARNING: The operation of any tool can result in foreign objects being
propelled into your eyes, resulting in severe eye damage. When operating a
power tool, always wear safety goggles or safety glasses with side shields and a
full face shield when needed.
A_, WARNING: If any parts are missing, do not operate the tool until the missing
parts have been replaced. Doing so could result in serious personal injury.
SERVICE SAFETY
•
Have your power tool serviced by a qualified repair person using only
identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
If any part of this Impact Wrench is missing or should break, bend, or fail
in any way, or should any electrical component fail to perform properly: shut
off the power switch and remove the Impact Wrench plug from the power
source and have the missing, damaged,
or failed parts replaced
before
resuming operation.
Tool service must be performed only at a Sears Parts & Repair Service
Center. Service or maintenance
performed
by unqualified
personnel could
result in a risk of injury.
Use only identical replacement parts when servicing a tool. Follow
the instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a
risk of electric shock or injury.
27990
ManuaLRevised_lO
1202
Page 7
SPECIFIC SAFETY RULES FOR IMPACT WRENCH
Hold power tools by the insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring or its own
cord. Contact with a "live" wire will make exposed metal parts of the tool live
and shock the operator.
Do not use the power tool with a damaged cord. Do not touch the
damaged cord; turn off the tool and pull the plug from the outlet if the
cord is damaged while working. Damaged cords increase the risk of an
electric shock.
Secure the workpiece. A workpiece clamped
vice is held more securely than it is by hand.
with clamping
devices
or in a
Always wait until the power tool has come to a complete stop before
placing it down. The tool insert can jam and lead to loss of control over the
power tool.
Check the socket carefully
on the hammer drill.
for wear, cracks or damage
before
installation
•
Hold the tool firmly
with both hands.
•
Always be sure that you have a firm footing.
you when using the tool in high locations.
•
Check the torque with a torque wrench. The proper fastening
differ depending on the type of size of the bolt.
•
Use thick,
cushioned
gloves and limit the exposure
time by taking
frequent
rest periods. Vibration caused by hammer-drill
or Impact wrench
action may be harmful to your hands and arms.
•
Do not use this tool as a drill. Tools equipped with shut-off clutches are not
designed for drilling applications.
The output drive can shut off automatically
and without warning.
•
Be careful when driving long screws. There is a risk of the tool sliding
off the fastener head, depending
on type of socket or bit used. First test
the fastening time of a fastener and pay attention during the screw-driving
process to ensure you do not injure yourself if the tool bit or socket slides off
of the fastener.
_. WARNING:
Bits, sockets,
when touching them.
Be sure that no one is below
and tools get hot during operation.
torque
may
Wear gloves
hearing loss.
_1_
ear protection.
noise
cause
A_, WARNING:
WARNING: Wear
To avoid
injury, holdExposure
the toolto by
the can
insulated
gripping
surfaces
only. If the tool contacts
hidden wiring or its
own cord, exposed metal parts of the tool could shock the operator and cause
serious injury. Make sure that hidden electrical
wiring, water pipes, or other
hazards are not in the cutting path.
27990
ManuaLRevised_lO
1202
Page 8
A_, WARNING:
Your
Impact Wrench
should
never be connected
to the power
source when you are assembling
parts, making adjustments,
installing
or
removing
bits, cleaning, or when it is not in use. Disconnecting
the Impact
Wrench will prevent accidental
starting, which could cause serious personal
injury.
When unpacking the box, do not discard
contents are accounted for.
1.
Carefully
surface.
lift the Impact wrench
2.
Open the box to locate the following:
•
Impact wrench
•
Manual
•
Soft case
any packing
materials
until all of the
out of the carton and place on a stable, flat
3.
Inspect the items carefully to make sure that no breakage or damage has
occurred during shipping. If any of the items mentioned is missing, return
the Impact Wrench with your sales receipt to your nearest Craftsman retail
outled to have the Impact Wrench replaced.
_,
WARNING:
If any part is broken or missing, do not attempt
to assemble
the Impact Wrench, plug in the power cord, or operate the Impact Wrench until
the broken or missing part is replaced. Failure to do so could result in possible
serious injury.
27990
Manual_Revised_lO
1202
Page 9
ID]_]_II]_IIIEe]_]
KNOW YOUR IMPACT
The machine
for tightening
WRENCH
(Fig.l)
is intended for driving and loosening screws and bolts as well as
and loosening nuts within the range of the Product Specifications.
Fig. 1
1/2-in. Square
Drive
Externally
Accessible
Carbon Brushes
Forward/
Reverse Switch
Live Tool Indicator
LED Work Light
_i, WARNING:
Do not allow familiarity
with the impact wrench to cause a lack of
alertness. A fraction of a second of carelessness
PRODUCT
is enough to cause severe injury.
SPECIFICATIONS
Motor
120Volt 60Hz AC only
No Load Speed
2100 RPM
Impacts
2700 BPM
Per Minute
Torque
350 ft-lbs
Capacity
Standard
bolt
Capacity
High tensile bolt
Wrench Weight
27990
Manual_Revised_lO
M 18 - M22 (11/16"
- 7/8")
M16 - M20 (5/8" - 13/16")
7.71 Ibs (3.5kg)
1202
Page 10
_,
WARNING:
The safe use of this product
requires an understanding
of the
information on the tool and in this operator's manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
LED WORK
LIGHT
Pressing the trigger
the Impact Wrench.
switch illuminates the LED worklight located on the base of
This feature provides extra light for increased visibility.
LIVE TOOL INDICATOR
The LED indicator shines green when the tool is plugged
into a power source.
EXTERNALLY ACCESSIBLE CARBON BRUSHES
Externally accessible brushes permit replacement of the brushes to extend the
life of the impact wrench.
27990
Manual_Revised_lO
1202
Page 11
SELECTING THE CORRECT SOCKET (SOCKETS AVAILABLE SEPARATELY)
_, CAUTION: Always verify that the tool is switched off and unplugged before
installing any accessories on the tool.
Always use the correct size socket for bolts and nuts. An incorrect socket will
result in inaccurate and inconsistent fastening torque and/or damage to the bolt
or nut.
INSTALLING AND REMOVING THE SOCKET (Fig. 2)
1.
2.
To install the socket, push it onto the
output drive of the tool until it locks into
place.
To remove the socket,
TURNING
THE IMPACT
Fig.
2
Socket
/
Output
Drive
simply pull it off.
WRENCH
_r_------_j
ON (Fig, 3)
1.
Connect the power cord of your impact
wrench to a standard household power
outlet.
2.
Press the part of the switch marked _F_,
to run the tool in the forward direction
Fig. 3
(clockwise
tightening
rotation). Use this direction
bolts or nuts.
for
3.
Press the
to reverse
clockwise
loosening
part of the switch marked _-R_
the motor direction (counterrotation). Use this direction for
bolts or nuts.
4.
Release the switch to stop the tool.
5.
Keep the switch
Switch
pressed for continuous
operation.
_, CAUTION: Do not allow familiarity with your impact wrench to make you
careless. Remember that a careless fraction of a second is sufficient to cause
severe injury.
27990
ManuaLRevised_lO
±202
Page 12
INSTALLING FASTENERS
NOTE: Always keep the Impact Wrench
damaging the fastener head.
at a right angle to the fastener
to avoid
To fasten:
1.
Start threading the fastener by hand onto or into its threaded counterpart
(e.g. nut onto bolt, or bolt into nut or threaded hole).
2.
With the proper impact socket securely mounted
impact socket onto the nut or bolt head.
3
Hold the tool securely with both hands and depress the switch at '_j.
The impact socket will turn the fastener and impacting will begin once the
fastener encounters resistance.
A_, WARNING: Do not over-tighten,
break the fastener.
to the wrench, slide the
as the force of the Impact Wrench can
To loosen:
1.
2
3.
With the proper impact socket securely mounted to the wrench, slide the
impact socket onto the bolt head.
Hold the tool securely with both hands and depress the switch at _.. The
tool will start to impact immediately.
Once the fastener has "broken loose," it will start to unthread. Be careful that
you do not allow a fastener to spin freely once it is no longer engaged with
its threaded counterpart,
as it may be thrown out of the socket.
IMPACTING TECHNIQUES
The proper fastening torque may differ depending
the material of the workpiece to be fastened, etc.
on the type or size of the bolt,
NOTE: Hold the tool straight along the axis of the bolt or nut.
NOTE: Excessive fastening torque may damage the bolt/nut or socket. Before
starting your job, always perform a test operation to determine the proper
fastening time for your bolt or nut.
Practice with various fasteners, noting the length of time required to reach the
desired torque. Check the tightness with a hand-torque wrench. If the fasteners
are too tight, reduce the impacting time. If they are not tight enough, increase
the impacting time.
Hold the tool firmly, and place the socket over the bolt or nut. Turn the tool on,
and fasten the bolt or nut to the proper torque.
The torque that is required to loosen a fastener averages 75% to 80% of the
tightening torque, depending on the condition of the contacting surfaces.
However, if rust or corrosion causes seizing, more torque may be required.
27990
ManuaLRevised_lO
1202
Page 13
After fastening, always check the torque with a torque wrench. The fastening
torque is affected by a wide variety of factors, including the following:
•
Voltage
o A voltage
•
reduction
will cause a reduction
in the fastening
torque.
Socket
o Failure to use the correct
torque.
size socket will cause a reduction
in the fastening
o A worn socket (wear on the hex end or square end) will cause a reduction
in the fastening torque.
Bolt
o Although the torque coefficient and the class of bolt may be the same, the
proper fastening torque will differ according to the diameter of the bolt.
o Even if the diameters of bolts are the same, the proper fastening torque
will differ according to the torque coefficient, the class of bolt and the bolt
length.
The use of a universal joint or an extension bar (both available separately)
reduce the fastening force of the impact wrench somewhat. Compensate
fastening for a longer period of time.
The manner of holding the tool or the material to be fastened
torque.
27990
ManuaLRevised_10
1202
will
by
will affect the
Page 14
_1, WARNING: To avoid serious personal injury, always disconnect the tool plug
from the power source before cleaning or performing any maintenance.
_1, WARNING:
When servicing, use only identical Craftsman replacement
Use of any other parts may create a hazard or cause product damage.
parts.
A_, WARNING:
It is not recommended to use compressed dry air as a cleaning
method for the Impact Wrench. If cleaning with compressed air must be used,
always wear safety goggles or safety glasses with side shields. If the operation is
dusty, also wear a dust mask.
BRUSH REPLACEMENT
(Fig. 4)
The impact wrench is equipped
accessible brushes.
with externally
Fig. 4
Replacement brush sets are available through
a Sears Parts & Repair Service Center.
Brush
Brush
Assembly
Cap
To replace:
1.
Unplug the tool.
2.
Loosen the brush caps with a slotted
screwdriver and remove them from the
tool.
3.
4.
_
_
:_
Brush
Assembly
Remove the brush assemblies.
L_
Check for wear. Replace both brush
assemblies when the carbon brush on either is less than 1/4 in. long.
NOTE: Do not replace the brush on one side without
5.
Brush
Cap
replacing
the other.
Reassemble using new brush assemblies. Make sure that the curvature of
the brush matches the curvature of the motor and that the brush moves
freely in the brush tube, being certain to fit the two metal "ears" into the
brush tube.
6.
Tighten all brush caps securely. Do not over-tighten.
The tool should be
allowed to "RUN IN" (run at no-load without a bit) for 5 minutes before use to
seat the new brushes properly.
GENERAL
MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial
solvents and may be damaged by
their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
A_, WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come in contact with plastic parts. Chemicals
can damage, weaken or destroy plastic which may result in serious personal injury.
,_, WARNING: When servicing, use only identical Craftsman replacement parts.
Use of any other parts may create a hazard or cause product damage. To ensure
safety and reliability, all repairs should be performed by a qualified service
technician at a Sears Service Center.
27990
ManuaLRevised_lO
i202
Page 15
PROBLEM
CAUSE
SOLUTION
The Impact Wrench
does not work
The Impact Wrench is
not plugged into a power
source
Plug the wrench into
an appropriate
power
source
Improper
Use a suitable socket
Socket cannot
installed
be
Cooling vents are
obstructed
Motor overheating
27990
ManuaLRevised_iO
socket selection
1202
Clean and clear vents.
Do not cover vents with
hand during operation
Page i6
m_
o
.C
C
o
C
E
_
E
.I..o
_°
C
_.z_
o.
J
o
E
8A IMPACT
WRENCH
MODEL
NUMBER
320.27990
The Model Number will be found on the Nameplate.
Number when ordering parts for this tool.
27990
Always mention
the Model
1
5610100000
Tapping
2
3125492000
Decorate
3
3421138000
Front Gear Housing
1
4
5690208000
O Ring
1
5
5650351000
Washer
1
6
2822873000
Spindle
1
201
2822725000
7
5700217000
8
3551371000
9
5700045000
Steel Ball
29
10
5650312000
Washer
2
11
3660413000
Spring
1
12
3551440000
Gear
1
13
3551372000
Spindle
1
14
5650187000
Washer
2
15
5700028000
Needle Bearing
2
16
3551470000
Gear
1
17
3704670000
Gasket
1
202
2822944000
18
5670258000
Pin
19
5700211000
Oil Impreging
20
3421139000
Rear Gear Housing
1
21
5690213000
Rubber Ring
1
22
5700014000
Ball Bearing
1
23
2750905000
Rotor
1
24
5700008000
Ball Bearing
1
ManuaLRevised_lO
1202
Impact
Screw
4
Cover
1
Block ASSY
Steel Ball
Impact
2
Block
Rear Gear Housing
1
1
ASSY
1
1
Bearing
1
Page 18
27990
25
3123738000
26
3125486000
27
5610048000
Tapping
Screw
2
28
5650007000
Spring Washer
2
29
5650005000
Plain Washer
2
30
2740283000
Stator
1
31
3321078000
Hosuing
1
32
4930041000
Receptacle
2
33
4930008000
Sleeve
2
34
5620017000
35
4930057000
Terminal
2
36
3321080000
Rear Cover
1
37
5610042000
38
3121028000
Cord Guard
1
39
3125935000
Brush Cover
2
40
2800005000
Brush Holder Assy
2
41
4960019000
Carbon
2
42
4930432000
Connecter
1
43
3700314000
Cord Anchorage
1
44
5610093000
Tapping
45
4890462000
PCB Assembly
46
4540017000
47
5610010000
Tapping
Screw
2
48
3125488000
Indicator
Cover
1
49
3125491000
Right Bracket
1
50
3125490000
Left Bracket
1
51
4360225000
LED
1
52
3125493000
53
3125487000
LED Cover
1
54
4930047000
Ring Terminal
4
ManuaLRevised_lO
1202
Bearing
Holder
Fan Baffle
Hexagon
Socket
Tapping
1
Screw
Screw
Brush Assy
Screw
Power Supply
Protecting
1
Indicator
Cap
2
6
2
1
1
1
Page 19
27990
55
4870453000
Rocker Switch
1
56
3321079000
Handle
1
57
4810002000
58
4860004000
Inner Wire
2
59
4930449000
Terminal
2
60
4930030000
Receptacle
4
ManuaLRevised_lO
1202
Power
Cord & Plug
1
Page 20
I_[e]li_l
27990
ManuaLRevised_lO
1202
Page 21
I_[e]li_l
27990
ManuaLRevised_lO
1202
Page 22
I_[e]li_l
27990
ManuaLRevised_lO
1202
Page 23
Your Home
For troubleshooting, product manuals and expert advice:
managemylife
www.managemylife.com
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME
®
(1-800-469-4663)
www.sears.com
Call anytirne,
day or night
(U.S.A. and Canada)
www.sears.ca
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of the nearest
SearsParts& Repair
ServiceCenter
1-800-488-1222 (U.S.A.)
www
.sears .corn
1-800-469-4663 (Canada)
www .sears
.ca
TOpurchase a protection agreement on a product serviced by Sears:
1-800-827-6655
(U.S.A.)
Para pedir serviciode reparacbn
a domicilio,y para ordenar piezas:
1-888-SU-HOGAR®
(1-888-784-6427)
1-800-361-6665
(Canada)
Au Canada pour service en frangais:
1.800.LE.FOYERMC
(1-800-533-6937)
www.sears.ca
www.sears.com
SesIr
Trademark
/ T_4 Trademark
of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries
/ T__ Marca de F_brica
de KCD IP, LLC en Estados
Unidos, o Sears
Brands,
LLC in otros paises
MD
de commerce
/
Marque d_pos_e de Sears Brands, LLC
® Registered
® Marca
Mc Marque
27990
Registrada
Manual_Revised_10
:$202
Page 24