Product Guide 2008 - Pro

WORLDWIDE SALES OFFICE
Bangkok, Thailand
Saline, U.S.A.
Osaka, Japan
Shanghai, P.R. China
2008 Worldwide Standard Version
PRODUCT GUIDE
Hoofddorp, The Netherlands
Seoul, South Korea
Pro-face Product Guide
GP3000 SERIES
Taipei, Taiwan
LT3000 SERIES
Bangalore, India
PS3000 SERIES
PL3000 SERIES
FP3000 SERIES
Pro-face Sales Office
Pro-face Company
Pro-face Branch Office
Distributor or
Sales Representative
Melbourne, Australia
GP2000 SERIES
GP SERIES
GLC SERIES
LT SERIES
Our Environmental Policy and Compliance with the RoHS Directive
Pro-face has taken significant steps to meet increasingly stringent requirements for environmental preservation and has sought to comply with the RoHS
Directive by adopting measures to eliminate specified harmful substances from existing products and products to be manufactured and sold beginning in 2006.
For details, please refer to our web site or contact our sales office in your country.
PS SERIES
PL SERIES
UF SERIES
Pro-face products and component
parts bearing the CE Mark and the
UL or c-UL Listing and Recognized Component Marks are your guarantees of
compliance with safety standards accepted in countries and regions worldwide.
http://www.pro-face.com/worldwide/
Caution: Before operating any of these products, be sure to read all related manuals thoroughly.
For printing purposes, the colors in this catalog may differ from those of the actual unit.
LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also,
"Contouring" - where some parts of the screen are brighter than others, producing a wavelike pattern may occasionally occur. Both are normal for an LCD display and are not defects.
Actual user screens may differ from the screens shown here.
All product names used in this catalog are the registered trademarks or trademarks of their respective companies.
All information contained in this catalog is subject to change without notice.
Pro-face is a registered trademark of Digital Electronics Corporation in
Japan, U.S.A., Canada, Europe and other areas and countries.
2008.1 Digital Electronics Corporation. All Rights Reserved.
Global Head Office
Australia and New Zealand
Digital Electronics Corporation
Osaka JAPAN
Tel: +81 (0)6 6613 3116
Fax: +81 (0)6 6613 5888
http://www.pro-face.com
info@pro-face.com
Pro-face Australia Pty Ltd.
Melbourne AUSTRALIA
Tel: +61 (0)3 9550 7395
Fax: +61 (0)3 9550 7390
http://www.pro-face.com.au http://www.pro-face.co.nz
pfau@pro-face.com
Pro-face China International Trading (Shanghai) Co., Ltd.
Shanghai P. R. CHINA
Tel: +86 (0)21 6361 5175
Fax: +86 (0)21 6361 5176
http://www.proface.com.cn
proface@proface.com.cn
South-East Asia Pacific
South Korea
Taiwan
Pro-face South-East Asia Pacific Co.,Ltd.
Bangkok THAILAND
Tel: +66 (0)2 617 5678
Fax: +66 (0)2 617 5688
http://www.proface.co.th
support@proface.co.th
Pro-face Korea Co., Ltd.
Seoul SOUTH KOREA
Tel: +82 (0)2 2630 9850
Fax: +82 (0)2 2630 9860
http://www.proface.co.kr
support@proface.co.kr
Pro-face Taiwan Co., Ltd.
Taipei TAIWAN
Tel: +886 (0)2 2657 1121
Fax: +886 (0)2 2657 1021
http://www.proface.com.tw
proface@proface.com.tw
European Head Office
Pro-face Europe B.V.
Hoofddorp THE NETHERLANDS
Tel: +31 (0)23 55 44 099
Fax: +31 (0)23 55 44 090
http://www.proface.com
info@proface.com
Austria
Pro-face Europe B.V.(Austria Office)
Hagenberg, AUSTRIA
Tel: +43 7236 3343-620
FAX: +43 7236 3343-629
http://www.pro-face.at
office@pro-face.at
Poland
Pro-face Europe B.V.
(Warsaw Office)
Warszawa, POLAND
Tel/FAX:+48 (22) 465-66-62
http://www.proface.pl/
proface@proface.pl
Switzerland
Pro-face Deutschland GmbH
Regensdorf SWITZERLAND
Tel: +41 (0)43 343 7272
Fax: +41 (0)43 343 7279
http://www.pro-face.ch
info@pro-face.ch
China
India
Pro-face India
Bangalore, INDIA
Tel: +91 80 4011 8050
Fax: +91 80 4011 8025
sales.proface@proface.co.in
France
Germany
Italy
Pro-face France S.A.S.
Mitry-Mory FRANCE
Tel: +33 (0)1 60 21 22 91
Fax: +33 (0)1 60 21 22 92
http://www.proface.fr
info@proface.fr
Pro-face Deutschland GmbH
Solingen GERMANY
Tel: +49 (0)212 258 260
Fax: +49 (0)212 258 2640
http://www.pro-face.de
sales@pro-face.de
Pro-face Italia S.p.a.
Bovisio Masciago (Milano) ITALY
Tel: +39 0362 59 96 1
Fax: +39 0362 59 96 69
http://www.proface.it
info@proface.it
Scandinavia
Spain and Portugal
Sweden
Pro-face Scandinavia ApS
Roskilde DENMARK
Tel: +45 70 22 01 22
Fax: +45 70 22 01 33
http://www.pro-face-eu.net
info@pro-face.dk
Pro-face Espa a
Cardedeu (Barcelona) SPAIN
Tel: +34 (0)93 846 07 45
Fax: +34 (0)93 845 48 68
http://www.pro-face.es
central@pro-face.es
Pro-face Sweden AB
Loddekopinge (Malmo) SWEDEN
Tel: +46 46 540 90 70
Fax: +46 46 71 27 90
http://www.pro-face-eu.net
info@pro-face.se
United Kingdom
Pro-face UK Ltd
Coventry ENGLAND
Tel: +44 (0)2476 440088
Fax: +44 (0)2476 440099
http://www.profaceuk.com
info@profaceuk.com
North/South American Head Office
Pro-face America, Inc.
Saline, MI U.S.A.
Tel: +1 734 429 4971
Fax: +1 734 429 1010
http://www.profaceamerica.com
sales.info@profaceamerica.com
WL/DP0801-ALL-01E15
We use a PC
at our production
site but we are
worried about
HDD trouble.
Freeze.....
・
・
・Is there a computer
we can use safely with
a production line in
continuous operation?
Desire to build
an information
gathering system
while minimizing
costs.
We want to bring
a PC into
a production site
with a bad
environment.
I want to use
a display.
But screen creation
seems to require
so much effort…
It's completely over-budget
・
・
・Building specialized
to install a display and PLC…
Factory upgraded
equipment to avoid water
・
・
・I tried using Z Company’
s
D with PL-3000B
vapor and dust would be
display but couldn’
t master
too much trouble…
on screen creation.
PL3000 SERIES
P8
Industrial Computers
System Maker upgraded
System Maker upgraded
A with GP-3600T
Factory upgraded
B with LT-3300S
GP3000 SERIES
C with PS-3710A
LT3000 SERIES
Graphic Operator Interfaces
With GP-Pro EX that saves time for development,
P3
the GP-3600T adoption system can be developed quickly!
and
Factory upgraded
D with FP-3900T
PS3000 SERIES
P6
Graphic Logic Controllers
A small-sized information gathering system
can be realized with LT-3300S, without installing a PLC.
FP3000 SERIES
Smart Panel Computers
With PS-3710A, we can introduce a smooth production
P7
Industrial Flat Panel Displays
Succeeded in avoiding HDD trouble incidents
P16
control system without the trouble of setting up
beforehand at site of continuous operation with PL-3000B,
equipment specifically for dust and drip prevention.
in order to reduce interruption time of production line.
Successful example index of how to find solutions with Pro-face
Is there a better method to obtain o n - s i t e b u s i n e s s s o l u t i o n s ?
Response
How can we implement a system t a i l o r e d t o c l i e n t s ’n e e d s ?
Pro-face can provide an answer to such problems. Pro-face solutions will surely satisfy your needs.
C o n v e n t i o n a l
software
GP-Pro EX
Add-on Software
P9
Graphic Logic
Controllers
Smart Panel
Computers
FA Panel
Computers
Industrial Flat
Panel Displays
GP SERIES
GLC SERIES
LT SERIES
PS SERIES
PL SERIES
UF SERIES
Individual device
m o d e l s
P13
P15
P9
Remote monitoring software
Graphic Logic
Controllers
P13
RPA
Easy Operation
HMI Screen Creation software
Graphic Operator
Interfaces
P11
Add-on Software
P15
P16
GP-Viewer EX
P9
WinGP
P10
Data management software
Pro-Server EX
R e s p o n s e
P10
s o f t w a r e
Screen Editor and Logic Program
Development software
Data collection
Software
Pro-Server
Add-on Software
Web Operation
Software
GP-PRO/PBⅢ
C-Package03
Pro-Server
with Pro-Studio
GP-Viewer
GP-Web
P14
P14
P14
P14
G P 3 0 0 0
S E R I E S
S y s t e m
Edit Mode peripherals
*
Ethernet Port
1 Not supported by GP-3301S/GP-3301L/GP-3302B.
Ethernet Interface(10BASE-T/ 100BASE-TX) COM1
USB Port
USB Interface(Host)
COM2
USB Transfer Cable(2m)
CF Card Interface
1 Not
available with 3.8inch/
GP-3302B.
CA3-CFCALL/128MB-01
CA3-CFCALL/256MB-01
VM Unit Interface
GP-Pro EX
All-in-one display/operation function on controller
PC
CF Card Adapter
CF Card
Response software
Screen Editor
PC
(Commercial type)GP-Pro EX V2.10
PCMCIA Slot
(TYPE-II SLOT)
Graphic Logic Controllers
EX-ED-V21
CA3-USBCB-01
With Serial I/F, GP can be connected to various PLC.
Contact us for more details.
*
LT3000SERIES
D e s i g n
(Commercial type)
GP077-CFAD10
CA3-CFCALL/512MB-01
CA6-CFCALL/1GB-01
VM Unit
GP2000-VM41
1 GP-3500T/GP-3510T/GP-3550T/GP-3560T/GP-3600T/GP-3650T Only
*
USB Host Interface (Host)
Bar-Code Reader
(Commercial type)
Printer
USB-to-IEEE1284 Conversion Cable
(Commercial type)
USB Cable(5m)or Commercial type
(Commercial type)
(Commercial type)
Printer
FP-US00
3.8
inch
USB Front Cable(1m)
CA5-USBEXT-01
(Commercial type)
CA6-USB232-01
*
USB Hub
(Commercial type)
Ethernet Interface
(10BASE-T/100BASE-TX)
Twisted-pair cable
1 Not
PROFIBUS Slave Unit
CA5-PFSALL/EX-01
available with 3.8inch.
Sound Out Interface
(Terminal Connector)
*
(http://www.pro-face.com/otasuke/).
PL Series or other
IPC, or PLC.
Industrial HUB
(Commercial type)
(Commercial type)
Expansion Unit Interface
*
1 For connectable devices, please refer to OtasukePro!
Main Network
supported by GP-3301S/
GP-3301L/GP-3302B.
DeviceNet Slave Unit
CA6-DNSALL/EX-01
inch
LT3201-A1-D24-C(Source Output Type) 2
*
5.7
QVGA
QVGA
inch
LT3301-L1-D24-K(Sink Output Type) 1
DC24V
LT3300-S1-D24-K(Sink Output Type) 1
DC24V
LT3301-L1-D24-C(Source Output Type) 1
DC24V
LT3300-S1-D24-C(Source Output Type) 1
*
12-point inputs, 6-point outputs
● Interface for Pro-face’
s EX Modules
(Up to two EX modules can be connected)
● Monochrome Amber/ Red LCD
● 320 x 240 pixels
● Black and White ・8 Shades
*
16-point inputs, 16-point outputs
● Interface for Pro-face’
s EX Modules
(Up to three EX modules can be connected)
● Monochrome LCD
● 320 x 240 pixels
● Black and White・16 Shades
●
I/F
LT-3300S/L
DC24V
●
I/F
AUX Unit I/F×1 / USB×1 / EX Module I/F×1
COM×1 / AUX Unit I/F×1 / USB×1 / EX Module I/F×1
ANSI/ISA-12.12.01-2007 Rev. 1 or later, CSA-C22.2 No.142-M1987, CSA-C22.2 No.213-M1987, EN55011 Class A, EN61000-6-2
*1.2. UL508,
* UL508, ANSI/ISA-12.12.01-2000 Rev. B or later, CSA-C22.2 No.142-M1987, CSA-C22.2 No.213-M1987, EN55011 Class A, EN61000-6-2
*
*
LT3300-L1-D24-K(Sink Output Type) 1
Interface for M Class
Video Camera
A d d i n g a d i s p l a y while
a v o i d i n g e x t r a c o s t.
Possible future system
expansion.
With LT3000…
MIC
(Commercial type)
Interface for M Class
DIO Interface
DIO Connector
Various parts including I/O Unit,
display, LED, Sensor, Switch, etc.
DIO Cable
CA6-DIOCNALL-01
(Prepared by the user)
FLEX NETWORK Interface
FLEX NETWORK
Communication Cable
FLEX NETWORK Connector
CA6-FNCNALL-01
FLEX NETWORK I/O Unit,
FLEX NETWORK Analog Unit, etc.
B
*
*1. Please contact our sales staff.
PROFIBUS Slave Unit
DeviceNet Slave Unit
CC-Link Unit
VM Unit
PROFIBUS Slave Unit
DeviceNet Slave Unit
CC-Link Unit
VM Unit
*
CA5-PFSALL/EX-01
2
*
CA6-DNSALL/EX-01
3
CA7-CCLALL/EX-01
*
GP2000-VM41
3
Example
Solutions
*
I/F
EX Modules
All 13 types of I/O units may be expanded
into 3 modules maximum( L T - 3 2 0 1 A c a n b e
expanded into 2 modules maximum). Flexible options
for equipment and function upgrades.
*
FN-X32TS41
FN-XY16SK41
5
FN-XY16SC41
*
*
5
*
5
16-pin input Sink/Source
and 16-point transistor
output Source type
FN-XY32SKS41
*
5
2-channel Analog/
Digital Conversion Unit
FN-AD02AH41
*
FN-AD04AH11
*
16-Point Input Module
●
8-Point Relay Output Module
●
16-Point Relay Output Module
●
8-Point Sink Output Module
●
16-Point Sink Output Module
●
8-Point Source Output Module
●
16-Point Source Output Module
●
4-Point Input/4-Point Output Module
●
2-ch Analog Input Module
●
Thermocouple Pt100 Input /
●
2-ch Analog Input/
1-ch Analog Output Module
●
1-ch Analog Output Module
Manufact u r e r a i m s f o r l o w - c o s t s y s t e m d e v e l o p m e n t …
Server PC
A small-sized information gathering system
can be realized with LT-3300S,
without installing a PLC.
Ethernet
LT-3300S/
LT-3300L
Serial
includes display, operation, and control functions all in one piece of equipment, but
with the Serial I/F *3 included, direct connection to equipment on site is also possible
DIO,
Analog
even without a PLC. Furthermore, it is possible to send information obtained on site
*
4
to a main computer thanks to the Ethernet I/F mounted. A system was developed
*
2. UL508, UL60950-1, ANSI/ISA-12.12.01-2000, UL1604, CSA-C22.2 No.14-95M(c-UL approval),CSA-C22.2 No.213-M1987(c-UL approval),CAN/CSA C22.2 No.60950-1-03(c-UL approval),EN55011 Class A and EN61000-6-2
3. UL508, UL60950-1,
ANSI/ISA-12.12.01-2000, CSA-C22.2 No.142-M1987(c-UL approval), CSA-C22.2 No.213-M1987(c-UL approval), CAN/CSA C22.2 No.60950-1-03(c-UL approval), EN55011 Class A and EN61000-6-2
4. UL508, UL1604, CAN/CSA-C22.2,Nos.142,and
213-M1987, EN55011 Class A and EN61000-6-2 5. UL508, CAN/CSA-C22.2, No.1010.1, EN55011 ClassA and EN61000-6-2 6. UL508, CAN/CSA-C22.2,No.1010.1-92.(c-UL approval),EN55011 Class A and EN61000-6-2
5
8-Point Input Module
●
〔B〕System Maker was entrusted by a client to introduce IT on site. However, building
4-channel Analog/
Digital Conversion Unit
6
●
1-ch Analog Output Module
That is why this manufacturer decided to adopt LT-3300S. This controller not only
32-pin input Sink/
Source and
32-point transistor
output Sink type
DC24V
DC24V
COM×1 / Ethernet×1 / AUX Unit I/F×1 / USB×1 / EX Module I/F×1
a system using a display and PLC requires costs for hardware that exceed the budget.
16-input Sink/Source and16-point
transistor output Sink type
*
4
FLEX NETWORK Unit
32-point input Sink/
Source type
DC24V
16-point inputs, 16-point outputs
● Interface for Pro-face’
s EX Modules
(Up to three EX modules can be connected)
● STN Color LCD
(LT-3300S)/Monochrome LCD(LT-3300L)
● 320 x 240 pixels
● 4,096 Colors
(LT-3300S)/Black and White・16 Shades(LT-3300L)
●
With LT3000…
Control, display, and operation are
performed by one piece of equipment
to cut down on equipment and keep
cost at a minimum.
FN-CABLE2010-31-MS (10m) 1
FN-CABLE2050-31-MS (50m)
FN-CABLE2200-31-MS (200m)
O p t i o n s
*
LT3300-L1-D24-C(Source Output Type) 1
(Commercial type)
Audio Input Interface
(L-IN/MIC)
DC24V
LT3000 SERIES is for those who desire…
CA7-CCLALL/EX-01
(Commercial type)
Video Input Interface
(V-IN)
QVGA
CC-Link Unit
Speaker
1 Not supported by 3.8inch/5.7 inch.
5.7
*
Modem
*
LT-3301L
LT3201-A1-D24-K(Sink Output Type) 2
USB-Serial(RS-232C)Conversion Cable(40cm)
1 Not
LT-3201A
*
*
which saves on costs using the smallest possible unit.
Temperature
Controller
*
*
3. LT-3201A is not equipped with Serial I/F.
*
4. Analog input/output and temperature input is possible with the EX module.
Inverter
*
5
5. Connection driver is updated as needed.
6
PS3000SERIES
Smart Panel Computers
Response software
GP-Pro EX
WinGP
PL3000SERIES
Slim-type design makes it strong enough for a rough production environment.
Industrial Computers
Response software
GP-Pro EX
WinGP
Rugged and High-Reliability Industrial Computers
▼2 Slots model
with DVD-ROM drive
Keypad
Model
8.4
inch
SVGA
1
Slot
12.1
(PS-3450A)
*
*
PS3451A-T41-24V(Fanless/ Intel® Celeron® M 600MHz)
*
PS-3710A/3711A/3700A
PS-3650A/3651A
PS-3450A/3451A
inch
XGA
1
Slot
15
(PS-3650A)
*
*
PS3651A-T41(Fanless/ Intel® Celeron® M 600MHz)
*
PS3651A-T41-24V(Fanless/ Intel® Celeron® M 600MHz)
*
1 (PS-3710A)
Slot (PS-3700A)
XGA
inch
PS3450A-T41(Intel® Celeron® M 1.0GHz)1
AC100-240V
PS3650A-T41(Intel®Celeron® M 1.3GHz) 3
AC100-240V
PS3710A-T41(Pentium® M 1.6GHz) 5
PS3450A-T41-24V(Intel® Celeron® M 600MHz) 2
DC24V
PS3650A-T41-24V(Intel® Celeron® M 1.3GHz) 3
DC24V
PS3710A-T41-24V(Pentium® M 1.6GHz) 5
2
DC24V
3
AC100-240V
3
DC24V
Intel Celeron M 1.0GHz or M 600MHz
Windows® 2000/XP/XP Embedded
● PC/AT-compatible panel computers
● HDD or CF card-bootable
●
®
®
Intel® Celeron® M 1.3GHz or Intel® Celeron® M 600MHz
● Windows® 2000/XP/XP Embedded
● PC/AT-compatible panel computers
● HDD or CF card-bootable
●
I/F
PS-3450A
PS-3451A
COM×2 / USB×4
LAN×2 / CF×2
Sound×1 / PCI×1
COM×2 / USB×4
LAN×2 / CF×2
Sound×1
*
●
I/F
PS-3650A
PS-3651A
COM×1 / USB×5 / LAN×2
CF×1 / PCMCIA×1
Sound×1 / RAS×1 / PCI×1
COM×1 / USB×5 / LAN×2
CF×1 / PCMCIA×1
Sound×1 / RAS×1
*
1. UL508, CSA-C22.2, No.142-M1987, EN55011 Class A, EN61000-6-2 and EN60950-1
2. UL508, CSA-C22.2, No.142-M1987, EN55011 Class A,
EN61000-6-2
3. UL508, CSA-C22.2, No.142-M1987, EN60950, EN55011 Class A and EN61000-6-2
4. UL508, CAN/CSA22.2, No.14-1995 and
CAN/CSA22.2 No. 60950, EN60950, EN61000-6-4 (Group 1, Class A), EN61131-2, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61000-4-12, 47 CFR Part 15 Class A
5. UL508, CSA-C22.2, No.142-M1987, EN55011 Class A,
EN61000-6-2 and EN60950-1
6. The first lot of PS3711A-T41 is not compatible with UL and CSA.
7. UL508, CSA-C22.2, No.142-M1987, EN55011
®
®
®
®
Class A, EN61000-6-2
Windows 2000 refers to Windows 2000 Professional and Windows XP refers to Windows XP Professional.
*
*
*
**
*
* *
*
PS3711A-T41(Fanless/ Intel® Celeron® M 600MHz)
*
PS3711A-T41-24V(Fanless/ Intel® Celeron® M 600MHz)
*
PS3700A-T41-ASU-P41(Pentium® 4-M 1.7GHz)
*
AC100-240V
6
PL-3700T/K
12.1 SVGA 4/2
Slots
inch
15
XGA
inch
AC100-240V
7
DC24V
4
AC100-240V
Intel® Pentium® 4-M 1.7GHz or Intel® Pentium®
M 1.6GHz or Intel® Celeron® M 600MHz
● Windows® 2000/XP/XP Embedded
● PC/AT-compatible panel computers
● HDD or CF card-bootable
●
PS-3710A
PS-3711A
PS-3700A
COM×4 / USB×5 / LAN×2
CF×1 / DVD-ROM×1 / FDD×1
PCMCIA×2 / PS/2×1
Sound×1 / RAS×1 / PCI×1
COM×2 / USB×5 / LAN×2
CF×1 / PCMCIA×2 / PS/2×1
Sound×1 / RAS×1
COM×4 / USB×3 / LAN×1
CF×1 / CD-ROM×1 / FDD×1
PCMCIA×2 / PS/2×2
Sound×1 / Printer×1 / PCI×1
*
* AC100-240V *
APL3600-TA 1, APL3600-KA
* DC24V
APL3600-TD 1, APL3600-KD
1 ( Keypad
*
1 ( Keypad
Model )
Slots
inch
PL-3000B
4/2
SXGA Slots
4/2
Slots
Model )
CoreTM Duo 2.0GHz
Intel® Celeron® M 440 1.86GHz
● Windows® XP/XP Embedded
● PC/AT-compatible panel computers
● HDD or CF card-bootable
●
I/F
COM×4 / USB×5 / LAN×2
PCI×4 or 2 / CF×1 / DVI-I×1 / RAS×1
SOUND×1 / DVD-ROM×1(option)
* AC100-240V *
1 ( Keypad
* DC24V
1
APL3700-TD 1, APL3700-KD
*
Model )
APL3900-TD
( Keypad Model )
CoreTM Duo 2.0GHz
Intel® Celeron® M 440 1.86GHz
● Windows® XP/XP Embedded
● PC/AT-compatible panel computers
● HDD or CF card-bootable
●
I/F
APL3900-TA
COM×4 / USB×5 / LAN×2
PCI×4 or 2 / CF×1 / DVI-I×1 / RAS×1
SOUND×1 / DVD-ROM×1(option)
*
*
1
AC100-240V
1
DC24V
CoreTM Duo 2.0GHz
Intel® Celeron® M 440 1.86GHz
● Windows® XP/XP Embedded
● PC/AT-compatible panel computers
● HDD or CF card-bootable
●
I/F
COM×4 / USB×5 / LAN×2
PCI×4 or 2 / CF×1 / DVI-I×1 / RAS×1
SOUND×1 / DVD-ROM×1(option)
APL3000-BA(CoreTM Duo 2.0GHz)2
APL3000-BA(Celeron® M440 1.86GHz) 2
*
*
AC100-240V
*
AC100-240V
APL3000-BD(CoreTM Duo 2.0GHz)3
APL3000-BD(Celeron® M440 1.86GHz) 3
DC24V
*
DC24V
CoreTM Duo 2.0GHz or Intel® Celeron® M440 1.86GHz
● Windows® 2000/XP/XPE/XP Embedded
●
I/F
COM×4 / USB×4 / LAN×2
PCI×4or2 / CF×1 / DVI-I×1 / RAS×1
DVD-ROM×1(option)
1. UL508, CSA22.2, No.142, EN55011 Class A, EN61000-3-2, EN61000-3-3, EN61000-6-2, EN61131-2, EN60950(AC model only), 47 CFR Part 15 Class A
*EN61000-6-2
*2. UL508, CSA-C22.2, No.142-M1987, EN55011 Class A,
and EN60950-1
*3. UL508, CSA-C22.2, No.142-M1987, EN55011 Class A, EN61000-6-2
PL SERIES is for those who desire…
We want to implement
predictive maintenance
for equipment.…
Prevent HDD trouble.
Those for whom creating
a visual screen is
troublesome.
Those for whom a high
performance
FA computer is necessary
We want to use PC
at a site with continuous
operation.
With PS3000…
With PS3000…
With PS3000…
With PL3000…
With PL3000…
With PL3000…
Various peripheral devices can be easily
connected using screens created with GP-Pro EX.
HDD-less for Windows XP Embedded
models. Greatly reduce the risk of
system failure.
Prevent trouble beforehand using the
RAS function, which detects signs of
malfunction.
Various peripheral devices can be easily
connected using screens created with GP-Pro EX.
Equipped with Core Duo 2.0GHz and
high-speed CPU, PL offers a solution for
control requiring high level processing.
HDD replacement is possible without
shutting off system using the“soft
mirror”and“hot swap”.
Please refer to“WinGP”of page
for more details.
C
Example
Solutions
9
Please refer to“WinGP”of page
for more details.
D
factory is concerned about a bad environment on site…
With PS-3710A, we can introduce a smooth production
control system without the trouble of setting up
equipment specifically for dust and drip prevention.
Because the manufacturing process at〔C〕Factory generates dust and steam, a
computer requiring the use of a keyboard cannot easily be brought on site. Thus,
Example
Solutions
PS-3710A
Windows XP
Embedded model
R
C F
the PS-3710A was introduced. This compact computer equipped with a touch
panel eliminates both concern over damage to a keyboard and the need for drip
or dust-proof equipment. Furthermore, HDD-less offers superior reliability.
Finally, we were able to build a strong production system at a site with a harmful
environment, for which even maintenance does not require opening up the
computer thanks to a front-mounted USB.
7
19
APL3700-TA 1, APL3700-KA
PS3000 SERIES is for those who desire…
Those for whom creating
a visual screen is
troublesome.
PL-3900T
4/2
DC24V
7
I/F
PL-3600T/K
CF Card with
XP Embedded
Keyboard
9
TM
factory's a i m t o c o n q u e r H D D t r o u b l e …
Succeeded in avoiding HDD trouble incidents beforehand
at site of continuous operation with PL-3000B,
in order to reduce interruption time of production line.
Production
instructions
sent from
server to site.
Data
collection
〔D〕
manufacturer experienced successive HDD trouble with the PC on-site, possibly
due to the harsh conditions of its continuous operation. Stopping the equipment
each time for repair caused a great loss. As a result of careful consideration
Software
Mirroring
PL-3000B was introduced. With its "Software Mirror Utility", this model makes it
possible to constantly mirrored HDD data from two HDDs[ RAID1]without a
Mouse
Server PC
PL-3000B
FP-3900T
HDD
burden on CPU. In the case that trouble occurs on either HDD, it is possible to
HDD
exchange the HDD cartridge without stopping the line, thus successfully
reducing outage time and substantially improving the line's rate of operation.
8
S
O
F
T
W
A
R
E
Total easy operation from screen creation to programs, simulation, and operation.
Screen creation software
01
Screen creation
02
Operator required to create
graphs is reduced with an
easy-to-understand screen
interface and touch operation.
GP-Pro EX
03
Control functions can be developed without trouble using a
single software.
Logic program can easily be created
using common ladder language thanks
to the“Logic Program Function”
.
Select, drag, and drop for easy screen
creation.
Created in the pursuit of
easy operation that can be performed
without trouble even by first-timers.
Programs
Simulation
You can conveniently verify
operations by computer before
transferring data to actual
equipment.
Conveniently verify operations with
“GP-Pro EX Simulation”. Confirm
debug using only a PC.
Drag and Drop
Corresponds to all GP 3000 series,
LT 3000 series, PS 3000 series and
PL 3000 series.
04
Download and use samples of screens,
materials, and features from the
“Otasuke-Pro!”support site.
Operation
Display collected data in a
chronological graph for
practical use!
Simultaneously record and
verify the status of equipment
while an alarm sounds.
Chronologically display collected data
using the“Historical Trend Graph”.
Display old data stored in buffering
area, USB memory, or CF card.
Obtain PLC alarm messages and device
values simultaneously using the
“Interconnected Alarm & Log”to
quickly determine the cause.
Record information on workers’
operations and analyze trouble.
Stores“Who”
“When”and“How”any
operation was performed as an
“Operation Log”. Greatly reduce time
required for analysis of trouble by
referring to the“Operation Log”when
an abnormality occurs.
Log Storage
【 Connection device sample 【
【 Screen sample 【
Add-on software
Remote monitoring software
Add-on software
Data management software
RPA
GP-Viewer EX
WinGP
Pro-Server EX
With RPA, it is possible to view information
on the screen of a computer in a separate location
from the GP display.
Remote surveillance of GP screen on computer
from office far away from site!
Screen created with GP-Pro EX can be
used in a Windows computer!
Easily gather information on the display and
equipment connected at low cost with the
screen created using GP-Pro EX as a platform!
(Remote PC Access)
Ethernet
PC
Pro-Server EX
Factory
Office
Office
Ethernet
GP
Data collection without program
Remote operation and remote
monitoring are also possible.
Bar-Code
reader
Ethernet
PS3000
SERIES
PL3000
SERIES
Laser Printer
Ethernet
Speaker
GP3000
SERIES
Factory
CD/DVD drive
PLC
PLC
Temperature
Controller
It is possible to collect information for the
site following simple configuration.
It is possible to access and work on computers from a
9
PLC
Display and operation are possible
USB HDD
Display and operation
are possible
PLC
s i t e ’s G P v i a E t h e r n e t , w i t h o u t b r i n g i n g a l a p t o p
It is possible to view the site’
s actual GP screen and visually
Until now, specialized software and skill were required to
Information on the display may be collected
computer to the site. Information kept in the office
grasp a status using a computer connected to the Ethernet at
create FA computer screens. However, with WinGP, it has
on a main computer via Ethernet, and sent
computer, such as the blueprint and maintenance
a remote location. Trouble on-site can therefore be
become possible to easily create screens using GP-Pro EX.
from the main computer to the site for
manual can therefore be viewed as well.
determined from the office.
*WinGP works with ordinary PCs as well.
production specifications.
10
GP2000SERIES
GP2000
SERIES
Graphic Operator Interfaces
Response software
Powerful Performance and Ethernet I/F Models
Built-in CF Card I/F Models
GP-2600T
GP-PRO/PBⅢ
GP2600-TC41-24V
12.1
inch
Beautiful Graphics and Easy Programing
*
TFT Color LCD
GP2600-TC11
●
●
●
●
SVGA
2
*
GP-2601T
GP2601-TC11
DC24V
1
●
●
●
●
AC100-240V
800 × 600 pixels
256 Colors
4MB FEPROM
I/F
I/F
Ethernet / CF Card / Sound / AUX / COM
Expansion COM / Printer / Tool Connecter
Expansion BUS / VM Unit / Expansion CF Card
GP-2500T
GP2500-TC41-24V
*
TFT Color LCD
GP2500-TC11
●
●
●
●
2
*
10.4
●
●
●
●
inch
VGA
Main features of GP2000 SERIES
Comes equipped with CF card I/F
Comes equipped with Ethernet I/F
Production information and BPM data may be stored on CF card.
Screen set-up and back-up online can be rapidly performed.
7.4
Data can be sent and received via Ethernet. Operation status of production
VGA
inch
equipment can be collected on a main computer to facilitate practical use of data.
●
●
●
●
M o d e l s
S E R I E S
S T
inch
●
●
●
●
QVGA
GP-477RE
*
8.9
Dust Resistance
Fastest Compact Model
GP477R-EG11 AC100V
●
320 × 240 pixels
High lntensity EL
● 640 × 400 pixels
● Amber Colored Screen
● 2MB FEPROM
●
High Visibility Amber Screen
●
Maintenance-free Backlight
●
Function Keys
1
DC24V
●
I/F
RS-422 Type
GP-37W2B
GP37W2-BG41-24V
*
2
*
5.7
ST400-AG41-24V 3
I/F COM / Tool Connecter
inch
ST401-AG41-24V
I/F
*
3
COM / Tool Connecter
*
DC24V
ST402-AG41-24V 3
I/F COM / Expansion COM / Tool Connecter
*
*
11
CF Card / COM / Tool Connecter
Expansion BUS
GP2301-LG41-24V
●
●
●
●
*
7
6.5
inch
DC24V
Handheld / CF Card / COM / Tool Connecter
*
5.7
GP-2301HS
GP2301H-SC41-24V
●
●
●
●
*
inch
DC24V
7
STN Color LCD
320 × 240 pixels
64 Colors
1MB FEPROM
I/F
*
DC24V
6
Monochrome LCD
320 × 240 pixels
Black & White, Gray Scale
1MB FEPROM
I/F
TFT Color LCD
640 × 480 pixels
256 Colors
2MB FEPROM
I/F
*
ST403-AG41-24V 3
DC24V
I/F COM / Tool Connecter / Ethernet I/F
1. UL508, UL1604, CAN/CSA-C22.2,Nos.142,and 213-M1987, EN55011 ClassA, EN50082-2
2. UL1950(Third Edition), dated July 26th, 1995, CAN/CSA-C22.2, No.950-95, EN55011 class A and EN50082-2,
CNS13438(Class A) 3. UL508, UL1604(Rev. A or later), CAN-C22.2 No.213-M1987, CAN-C22.2 No.14, EN55011 class A and EN61000-6-2
*
GP2000H SERIES
Ethernet Type
MPI Type
●
●
●
●
●
DC24V
6
GP-2301L
Ethernet / CF Card / COM / Expansion COM
Printer / Tool Connecter / Expansion BUS
GP2401H-TC41-24V
*
STN Color LCD
320 × 240 pixels
64 Colors
1MB FEPROM
I/F
DC24V
6
GP-2401HT
Handheld
Models
DC24V
DC24V
Monochrome, Blue-mode LCD
320 × 240 pixels
● Blue and White
● 1MB FEPROM
I/F COM / Tool Connecter
●
RS-232C Type
DC24V
CF Card / COM / Tool Connecter
Expansion BUS
GP2301-SC41-24V
●
●
●
●
Monochrome LCD
320 × 240 pixels
Black & White, Gray Scale
2MB FEPROM
I/F
AUX / COM / Printer / Tool Connecter
*
DC24V
6
GP-2301S
DC24V
6
GP-2300L
●
●
●
●
*
TFT Color LCD
320 × 240 pixels
256 Colors
1MB FEPROM
I/F
Ethernet / CF Card / COM / Expansion COM
Printer / Tool Connecter / Expansion BUS
GP2300-LG41-24V
CF Card / AUX / COM / Printer
Tool Connecter / Expansion BUS
GP2301-TC41-24V
●
●
●
●
320 × 240 pixels
64 Colors
2MB FEPROM
I/F
Superb Cooling and
inch
●
GP477R-EG41-24VP
*
Aluminum Body for
3.8
inch
DC24V
5
GP-2301T
DC24V
6
Ethernet / CF Card / COM / Expansion COM
Printer / Tool Connecter / Expansion BUS
*
STN Color LCD
*
TFT Color LCD
640 × 480 pixels
256 Colors
2MB FEPROM
I/F
TFT Color LCD
320 × 240 pixels
256 Colors
2MB FEPROM
GP2300-SC41-24V
CF Card / AUX / COM / Printer
Tool Connecter / Expansion BUS
GP2401-TC41-24V
●
●
●
●
GP-2300S
5.7
S E R I E S
*
DC24V
1
GP-2401T
DC24V
4
Ethernet / CF Card / Sound / AUX / COM
Expansion COM / Printer / Tool Connecter
Expansion BUS
GP2300-TC41-24V
I/F
G P
*
*
Monochrome LCD
640 × 480 pixels
Black & White, Gray Scale
2MB FEPROM
I/F
GP-2300T
keep track of unmanned production lines.
O t h e r
Ethernet / CF Card / Sound / AUX / COM
Expansion COM / Printer / Tool Connecter
Expansion BUS / Expansion CF Card
TFT Color LCD
640 × 480 pixels
256 Colors
4MB FEPROM
I/F
Video surveillance is possible by attaching the optional VM unit to closely
VM unit I/F may be mounted
●
●
●
●
GP-2400T
●
●
●
●
CF Card / AUX / COM / Printer
Tool Connecter / Expansion BUS
GP2501-LG41-24V
DC24V
1
640 × 480 pixels
Black & White, Gray Scale
4MB FEPROM
GP2400-TC41-24V
AC100-240V
3
GP-2501L
*
Monochrome LCD
I/F
*
STN Color LCD
640 × 480 pixels
64 Colors
2MB FEPROM
I/F
GP-2500L
●
●
●
●
CF Card / AUX / COM / Printer
Tool Connecter / Expansion BUS
GP2501-SC11
●
●
●
●
Ethernet / CF Card / Sound / AUX / COM
Expansion COM / Printer / Tool Connecter
Expansion BUS / Expansion CF Card
GP2500-LG41-24V
AC100-240V
3
GP-2501S
DC24V
1
640 × 480 pixels
64 Colors
4MB FEPROM
I/F
*
TFT Color LCD
640 × 480 pixels
256 Colors
2MB FEPROM
I/F
GP-2500S
*
STN Color LCD
CF Card / AUX / COM / Printer
Tool Connecter / Expansion BUS
GP2501-TC11
●
●
●
●
AC100-240V
Ethernet / CF Card / Sound / AUX / COM
Expansion COM / Printer / Tool Connecter
Expansion BUS / VM Unit / Expansion CF Card
GP2500-SC41-24V
AC100-240V
3
GP-2501T
DC24V
1
640 × 480 pixels
256 Colors
4MB FEPROM
I/F
*
TFT Color LCD
800 × 600 pixels
256 Colors
4MB FEPROM
CF Card / COM / Tool Connecter
Expansion BUS
GP-2301HL
GP2301H-LG41-24V
●
●
●
●
Handheld / CF Card / COM / Tool Connecter
*
7
5.7
inch
DC24V
Monochrome LCD
320 × 240 pixels
Black & White, Gray Scale
1MB FEPROM
I/F
Handheld / CF Card / COM / Tool Connecter
1. UL508, UL1604, CAN/CSA-C22.2 No.1010-1, EN55011 Class A and EN61000-6-2
2. UL60950, UL1604, CAN/CSA-C22.2 No.60950-00, CAN/CSA-C22.2 No.213-M1987, EN55011 Class A and EN61000-3-2,
EN61000-3-3, EN61000-6-2, EN60950
3. UL60950, UL1604, CAN/CSA-C22.2 No.60950-00 (c-UL approval), CSA-C22.2 No.213-M1987 (c-UL approval), EN55011 Class A and EN61000-3-2, EN61000-3-3,
EN61000-6-2, EN60950
4. UL508, UL1604, CAN/CSA-C22.2,Nos.142,and 213-M1987, EN55011 Class A and EN61000-6-2
5. UL508, UL1604, CSA-C22.2,Nos.142,and 213-M1987 (c-UL approval), EN55011
Class A and EN61000-6-2
6. UL1604, UL60950 (Third Edition), CAN/CSA-C22.2 No.60950-00, No.213-M1987, EN55011 class A, EN61000-6-2
7. UL60950 (Third Edition), CAN/CSA-C22.2 No.60950-00,
EN55011 class A and EN61000-6-2
*
*
*
*
*
12
S
GLCSERIES
Graphic Logic Controllers
Response software
O
F
T
W
A
R
E
Screen Editor and Logic Program Development Software
GP-PRO/PBⅢ
Advanced HMI and Control in One Box
GPPRO-CNT01W-P**
Easy Screen Creation &
Logic Program Development
Enjoy the benefits of having screen creation
and loglc program development in a single,
integrated package.Create easy-to-use HMl
operation.
GLC2300T/L
GLC2300-TC41-24V
GLC2300-LG41-24V
*
*
5.7
inch
1
DC24V
1
DC24V
TFT Color LCD
Monochrome LCD
● 320 × 240 pixels
● 256 Colors
Black & White, Gray Scale
● 2MB FEPROM
●
I/F
GLC2400-TC41-24V
*
GLC2500T
7.4
inch
DC24V
2
TFT Color LCD
● 640 × 480 pixels
● 256 Colors
● 4MB FEPROM
I/F
*
*
GLC2500-TC41-24V
GLC2500-TC41-200V
GLC2600T
10.4
inch
GLC2600-TC41-24V
DC24V
3
GLC2600-TC41-200V
AC100-200V
4
TFT Color LCD
● 640 × 480 pixels
● 256 Colors
● 4MB FEPROM
●
Ethernet / CF Card
FLEX NETWORK I/O Unit / COM
Expansion COM/ Tool Connecter / AUX
*
GLC2400T
●
Ethernet / CF Card
FLEX NETWORK I/O Unit
Sound / COM / Expansion COM
Printer / Tool Connecter / AUX
I/F
*
*
Software supported by the GP Series(expect GP3000
Series), ST Series, GLC Series and LT Series.
12.1
inch
DC24V
5
AC100-200V
6
TFT Color LCD
● 800 × 600 pixels
● 256 Colors
● 4MB FEPROM
●
Ethernet / CF Card
FLEX NETWORK I/O Unit / Sound
COM / Expansion COM / Printer
Tool Connecter / AUX
VM Unit / Expansion CF Card
*
Ethernet / CF Card
FLEX NETWORK I/O Unit / Sound
COM / Expansion COM / Printer
Tool Connecter / AUX
VM Unit / Expansion CF Card
I/F
*
*
*
LTSERIES
Graphic Logic Controllers
Response software
5.7
inch
DC24V
Type
●
●
●
A2
Type
H
*
*
Type
B+
Type
B
16-point inputs,16-point outputs(Built-in)
+FLEX NETWORK I/F
GLC150-BG41-XY32KF-24V 1
GLC150-SC41-XY32KF-24V(Color) 1
*
Built-in FLEX NETWORK I/F
GLC150-BG41-FLEX-24V 1
Type H-AD
16-point inputs,16-point outputs
(Built-in)
+ 2-point AD/1-point DA
Type H-ADT
16-point inputs,16-point outputs
(Built-in)
+ 2-point AD/2-point DA+3-point Thermocouple Input
Type H-ADP
13
●
●
16-point inputs,16-point outputs(Built-in)Source Type
GLC150-BG41-XY32SC-24V 1
*
16-point inputs,16-point outputs
(Built-in)
+ 2-point AD/2-point DA+2-point Pt100 Input
Now you can enlarge fonts in the usual scaling
factors of 1, 2, 4 and 8, and in any magnification
rate between 1 and
8. This lets you
precisely adjust
character size to
match your layout.
PSW−ED01-V**
Create and use your own BMP parts
Create your own image parts or use parts
created in the past.
lllustrations
*
Type
*
Type
H 1( S i n k O u t p u t T y p e )
C
D **
the site following simple configuration.
Built-in SIO
+ FLEX NETWORK I/F
Logos
Built-in Device Net
GLC150-BG41-DNM-24V
*
1
*
Remote Monitoring
site in real-time using the Internet or
a cell phone irrelevant of time and
on a main computer via Ethernet, and
place.
for production specifications.
Pro-Server Add-on Software
PLC
PLC
Temperature
Controller
HMI screen at the production
Internet
site can be monitored directly
GLC150-BG41-ADC-24V 2
*
GLC150-BG41-ADTC-24V 2
*
GLC150-BG41-ADPC-24V 2
*
It is possible to monitor a production
Ethernet
1
*Marketed only by Pro-face America, Inc.
units comply with
standards
**1.These
* UL508, UL1604, CAN/CSA-C22.2,No.1010-1, EN55011 Class A and EN61000-6-2, CNS 13438 (ClassA) *2. UL508, UL1604, CAN/CSA-C22.2,No.1010-1, EN55011 Class A and EN61000-6-2
GW-CJ01-V**
Information on Pro-face may be collected
sent from the main computer to the site
GLC150-BG41-RSFL-24V
*
Data
collection
without
program
It is possible to collect information for
H2(Source Output Type)
GLC150-BG41-ADK-24V 2
*
GLC150-SC41-ADK-24V(Color)2
*
GLC150-BG41-ADTK-24V 2
*
GLC150-SC41-ADTK-24V(Color)2
*
GLC150-BG41-ADPK-24V 2
*
GLC150-SC41-ADPK-24V(Color)2
Photos
Web Operation Software
Real-Time Data Collection
Blue-mode monochrome LCD
1MB FEPROM
320 x 240 pixels
● Blue and White
●
A1
QVGA
DC24V
STN Color LCD
1MB FEPROM
320 x 240 pixels
● 64 Colors
Type
Select from 1,200 image parts
Create screens quickly and easily by simply
arranging parts and marks selected from 1,200
available types.
Blue Monochrome
LCD Model
QVGA
16-point inputs,16-point outputs(Built-in)Sink Type
GLC150-BG41-XY32SK-24V 1
GLC150-SC41-XY32SK-24V(Color) 1
Windows font display
Windows fonts can be displayed as bitmap data
on the HMI screen just as you want them.
Data Collection Software
Color
LCD Model
inch
Beautiful Graphic
GP-PRO/PBⅢ
Low Cost HMI and Control with Built-in I/O
5.7
Attractive Fonts
lntegral-multiple fonts
1. UL1604 and UL60950(Third Edition), CAN/CSA-C22.2 No.60950-00 and No.213-M1987, EN55022 class A and EN50082-2
2. UL508, UL1604, CAN/CSA-C22.2, No.142 and 213-M1987(c-UL approval),
EN55011 Class A and EN61000-6-2
3. UL508, UL1604, CAN/CSA-C22.2, No.1010-1(c-UL approval), EN55011 Class A and EN61000-6-2
4. UL60950, UL1604, CAN/CSA-C22.2, No.60950-00(c-UL approval),
CAN/CSA-C22.2,No.213-M1987(c-UL approval), EN55011 Class A and EN61000-3-2, EN61000-3-3, EN61000-6-2, EN60950
5. UL508, UL1604, CAN/CSA-C22.2, No.1010-1(c-UL approval), EN55011 Class A and
EN61000-6-2
6. UL60950, UL1604, CAN/CSA-C22.2, No.60950-00(c-UL approval), CAN/CSA-C22.2,No.213-M1987(c-UL approval), EN55011 Class A and EN61000-3-2, EN61000-3-3, EN61000-6-2, EN60950
*
Eesy Logic
Programming
Easy Screen
Creation
environments with simple drag & drop mouse
on Pro-Server.Use the data
playback feature to check
PSW-GV01-V**
previously recorded production
data and visually trace the
View GP screen from remote location!
source of hard-to-find problems.
14
PS SERIES
FP3000 SERIES
Smart Panel Computers
Compact-type design makes it strong enough for a rough production environment.
Industrial Flat Panel Displays
Touch Screen Displays with Standard DVI Compatibility
FP3710-K41
High Reliability
Industrial PC ’
s
With Windows CE
®
Type G
Type B
PS-3600G
PS-2000B
12.1 SVGA Windows
inch
CE5.0
PS3600G-T41
*
3
Slots
PS2000B-41
AC100-240V
1
PS3600G-T41-24V
*
DC24V
2
●
I/F
*
Windows
XP
Windows
XP Embedded
AC100-240V
3
PC/AT-compatible computer in tower case
● Pentium® III 1GHz or Celeron® 566MHz CPUs
● Dual hard disk drive compatible
● Hard disk drive or CF card bootable
●
Windows® CE panel computers
Intel® XScale® PXA 270 520MHz
● Diskless operation
● PCMCIA support(optional)
● Aluminum die-cast body for superb cooling and dust resistance.
●
Windows
2000
Keypad
Model
I/F
COM x 4 / USB x 4 / LAN x 2 / PS/2 x 2 / PCI x 3 / RGB / DVl / Sound / RAS
COM × 2 / USB × 4(host × 3 / client × 1) / LAN × 1 / CF × 1 / Sound / RAS
*
*
FP-3500T
*
1. UL60950-1, CAN/CSA-C22.2 No.60950-1 (c-UL approval)
2. UL508, CSA-C22.2 No.14-95 (c-UL approval)
3. UL60950 (Third Edition), CSA-C22.2 No.950-M95, EN60950, EN55011 (Group 1 ClassA),
EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
10.4
inch
FP3500-T41-24V
PL SERIES
FP-3600T/3650T
12.1 SVGA
inch
VGA
*
DC24V
1
Rear USB Interface
● TFT Color LCDs
● Support for displaying analog
● VESA standard for mounting
on stand or arm*
FP3650-T41
Analog RGB x 1 / DVI x 1
USB x 1 / COM x 1
* Required an optional cover
*
AC100-240V
2
Rear USB Interface
TFT Color LCDs
● Support for displaying analog
● VESA standard for mounting
on stand or arm*
●
●
I/F
Analog RGB x 1 / DVI x 1
USB x 1 / COM x 1
*
12.1 SVGA
inch
4
Slots
Windows
2000
PL-7930T
Windows
XP
PL6930-T42-PM(Pentium® M 1.6GHz) 1
*
PL6930-T42-CM(Celeron® M 1.3GHz)
*
PL6930-T41(Fanless/ Celeron® M 1.3GHz)
*
AC100-240V
AC100-240V
1
1
AC100-240V
PC/AT-compatible panel computers
● Intel® Pentium® M 1.6GHz or Celeron® M 1.3GHz CPUs
● Hard disk drive or CF card bootable
●
I/F
COM x 4 / USB x 3 / LAN x 2 / PCI/ISA x 2 / PCI x 1 / ISA x1 / PCMCIA / Sound /RAS
PL-6931T
12.1 SVGA
inch
2
Slots
Windows
2000
inch
XGA
4
Slots
Windows
XP
PL7930-T42-PM(Pentium® M 1.6GHz)1
*
PL7930-T42-CM(Celeron® M 1.3GHz)
*
PL7930-T41(Fanless/ Celeron® M 1.3GHz)
*
Windows
XP Embedded
AC100-240V
1
1
*
*
FP3710-T41-U
3
AC100-240V
FP3900-T41-U
FP3710-T41
3
AC100-240V
FP3900-T41
AC100-240V
3
Front USB Interface
(FP3710-T41-U)
Large and premium quality
● TFT Color LCDs
● Support for displaying analog
●
●
I/F
Analog RGB x 1 / DVI x 1
USB
(Front)x 1 / COM x 1
AC100-240V
3
AC100-240V
3
Front USB Interface
(FP3900-T41-U)
● Large and premium quality
● TFT Color LCDs
● Support for displaying analog
●
I/F
Analog RGB x 1 / DVI x 1
USB
(Front)x 1 / COM x 1
* 2. UL60950-1 (First Edition), CSA-C22.2, No.60950-1-03, EN55011 Class A and EN61000-6-2 * 3. UL508, CSA-C22.2, No.142-M1987,
UF SERIES
Industrial Flat Panel Displays
Individual device
AC100-240V
AC100-240V
PC/AT-compatible panel computers
● Intel® Pentium® M 1.6GHz or Celeron® M 1.3GHz CPUs
● Hard disk drive or CF card bootable
I/F
COM x 4 / USB x 3 / LAN x 2 / PCI/ISA x 2 / PCI x 1 / ISA x1 / PCMCIA / Sound /RAS
15
inch
XGA
2
Slots
Windows
2000
Windows
XP
Windows
XP Embedded
PL6931-T42-PM(Pentium® M 1.6GHz) 1
AC100-240V
PL7931-T42-PM(Pentium® M 1.6GHz) 1
AC100-240V
PL6931-T42-CM(Celeron® M 1.3GHz) 1
AC100-240V
PL7931-T42-CM(Celeron® M 1.3GHz) 1
AC100-240V
AC100-240V
PL7931-T41(Fanless/ Celeron® M 1.3GHz) 1
AC100-240V
1
*
*
●
●
●
COM x 4 / USB x 3 / LAN x 2 / PCI/ISA x 1 / ISA x1 / PCMCIA / Sound /RAS
*
PC/AT-compatible panel computers
Intel® Pentium® M 1.6GHz or Celeron® M 1.3GHz CPUs
● Hard disk drive or CF card bootable
●
I/F
*
*
FP3710-K41
*
SXGA
●
Windows
XP Embedded
PC/AT-compatible panel computers
Intel® Pentium® M 1.6GHz or Celeron® M 1.3GHz CPUs
● Hard disk drive or CF card bootable
I/F
UF5310
6.5
inch
VGA
UF5310-2
●
*
1
TFT Color LCD
UF5510
10.4
inch
*
UF7811-2
12.1 SVGA
inch
VGA
UF5510-2-1
●
UF6610
2
TFT Color LCD
UF6610-2-1
●
*
2
TFT Color LCD
15
inch
XGA
UF7811-2-DV1-24V
●
TFT Color LCD
*
3
COM x 4 / USB x 3 / LAN x 2 / PCI/ISA x 1 / ISA x1 / PCMCIA / Sound /RAS
1. UL508, CSA-C22.2, No. 142-M1987 (c-UL approval), EN55011 Class A, EN61000-3-2, EN61000-3-3, EN61000-6-2 and EN60950-1
®
®
®
®
Windows 2000 refers to Windows 2000 Professional and Windows XP refers to Windows XP Professional.
15
Windows
2000
19
inch
PL-7931T
Windows
XP
*
*
PL6931-T41(Fanless/ Celeron® M 1.3GHz)
*
*
**
15
Windows
XP Embedded
FP-3900T
XGA
* Required an optional cover
1. UL508, CSA-C22.2, No.142-M1987, EN55011 Class A and EN61000-6-2
EN55011 Class A, EN61000-6-2 and EN60950-1 First Edition
PL-6930T
DC24V
1
FP3600-T11 AC100-240V
I/F
Rugged and High-Reliability Industrial Panel Computers
*
inch
FP3500-T11 AC100-240V
●
FA Panel Computers
FP3600-T41-24V
FP-3710T/K
15
XGA
UL60950 (Third Edition), CAN/CSA C22.2 No. 60950-00 (c-UL approval)
Group 1 Class A, EN61000-6-2
3. EN55011 Class A, EN61000-6-2
*1.Available
*2.forEN55011
on special request. Please consult a Pro-face sales representative
details regarding the above monitors. *
**
16
Pro-face Series
This is the reason for number one sales in the world.
An International Brand
You Can Rely On.
There is a reason why we continue to get good reviews around the world such as“Digital is the best for programmable
display”. Not only we do offer hardware with high-performance and advanced technology, but it is also easy to use. Digital
cares about users and that is the reason for the 5 features behind the number one brand in the world.
P r o-f a c e
Special feature
01
Over 30 Years of
HMI Reliability
Technological and
Communication
Strength
Global Network
Global Support
P r o-f a c e
Special feature
04
Connects to a wide variety of models!
Supports many connection device drivers.
Program-less connection to many devices
at production site is possible.
Perfect anywhere in the world.
Compliant with overseas standards so it can be exported around the world.
Expanding worldwide through our sales offices around the world.
Since Digital, a manufacturer specializing in indicators,
released programmable displays, we’ve concentrated
Pro-face Europe B.V.
(European Head Office)
our efforts in supporting drivers that connect to diverse
devices by various manufacturers.
Pro-face Korea Co., Ltd.
By introducing Pro-face products,“connect simply by
connecting”to a PLC or controller, etc., currently being
Digital Electronics Corporation
Pro-face China International Trading
(Shanghai) Co., Ltd.
used on site without having to deal with any program.
Such convenience is a feature only offered by Digital.
Pro-face America, Inc.
Pro-face Taiwan Co., Ltd.
Pro-face India,
Bangalore HQ
Pro-face South-East Asia
Pacific Co., Ltd.
Worldwide sales offices
P r o-f a c e
Special feature
02
Pro-face sales offices
Pro-face branch offices
P r o-f a c e
Special feature
Easy to use
for beginners
Touch-operated software makes it
easy for anyone to create a screen
without specialized knowledge.
The reason we receive great reviews such as“Digital
makes it easy to create screens”is thanks to our screen
03
Effective use
of property
Compatibility of our first ever
software sold in 1989 with
new software has been secured,
so you can effectively use
previously created screens.
creation software“GP-Pro EX”developed for easy
One of the reasons people choose“Digital”is that you
operation. For example, use the drag and drop function
can continue to use the same screen. Even when
to move parts you choose and create a new screen
replacing display, screens previously created may still
simply by touch.
be used as such.
Former GP
Compliant with safety standards
Compliance with safety standards makes it possible to integrate with
exportation organizations with ease of mind.
Compatible with environmentally
friendly RoHS directive
We make products compatible with Restrictions of Hazardous Substances
(RoHS) for shipping to the European market.We have been making
sequential changes since March 2007 to meet the Chinese RoHS.
For the latest information on our International Sales Offices…
http://www.pro-face.com/company_e/proface/offices.htm
Global support for ease of mind
all over the world.
Telephone and Email support
Resolution
converter
New GP
New GP in special/
extra size
“Otasuke Pro!”
around the world.
Repair
Seminar
Site procurement
FREE
membership
Downloads available of necessary documents related to export for export to
other countries, as well as data and information such as English manuals.
“Otasuke Pro!”English site…
“Otasuke Pro!”
English site…
17
Web support
Pro-face provides hospitable support through our support centers
Overseas support site ensures ease of mind
and responds to countries of export.
Project
converter
Drag and Drop
Pro-face Australia Pty Ltd
http://www.pro-face.com/otasuke/
18