Acer X1111 User`s guide

Acer Projector
X1111/X1111H/X1111A/
X1211/X1211H/X1211S/X1211K/
X1213P/X1213PH/X1311KW/
X1313PW/X1313PWH
Series User's Guide
Copyright © 2011. Acer Incorporated.
All Rights Reserved.
Acer Projector X1111/X1111H/X1111A/X1211/X1211H/X1211S/X1211K/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH Series User's Guide
Original Issue: 8/2011
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer Projector X1111/X1111H/X1111A/X1211/X1211H/X1211S/X1211K/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH Series
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC."
iii
Information for Your Safety and
Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
•
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.6 meters (15 feet) maximum length.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
•
•
Do not look into the projector's lens when the lamp is on. The bright light
may hurt your eyes.
Turn on the projector first and then signal sources.
Do not place the product in the following environments:
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector are necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shorten the life span and darken the image.
Locations near fire alarms.
•
•
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
•
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
vi
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to stop
before turning main power off.
Do not touch the air outlet grille and bottom plate which become hot.
Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots are clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when warning messages display.
When changing the lamp, please allow the projector to cool down, and
follow all changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen Display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
"Lamp(s) contain Mercury,
Dispose Properly."
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
viii
First Thing First
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the projector provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
•
Reset the "Lamp Hour Reset" function from the Onscreen Display "Management"
menu after replacing the lamp module.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
When changing the lamp, please allow the projector to cool down, and follow all
changing instructions.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
First Thing First
iii
viii
Usage Notes
viii
Precautions
viii
Introduction
1
Product Features
1
Package Overview
2
Projector Overview
3
Projector Outlook
3
Control Panel
4
Remote Control Layout
5
Getting Started
Connecting the Projector
Turning the Projector On/Off
7
7
8
Turning On the Projector
8
Turning Off the Projector
9
Adjusting the Projected Image
10
Adjusting the Height of the Projected Image
10
How to Optimize Image Size and Distance
11
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
User Controls
14
17
Installation Menu
17
Acer Empowering Technology
18
Onscreen Display (OSD) Menus
19
Color
20
Image
22
Setting
26
Management
29
Audio
30
Timer
30
Language
31
Contents
Information for Your Safety and Comfort
Appendices
Troubleshooting
32
32
LED & Alarm Definition Listing
36
Replacing the Lamp
37
Ceiling Mount Installation
38
Specifications
41
Compatibility Modes
44
Regulations and safety notices
48
1
Product Features
This product is a single-chip DLP® projector, including the following
outstanding features:
•
DLP® technology
•
X1111/X1111H/X1111A: Native 800 x 600 SVGA resolution
Auto / 4:3 / 16:9 aspect ratio supported
X1211/X1211H/X1211S/X1211K/X1213P/X1213PH:
Native 1024 x 768 XGA resolution
Auto / 4:3 / 16:9 aspect ratio supported
X1311KW/X1313PW/X1313PWH: Native 1280 x 800 WXGA resolution
Auto/ Full / 4:3 /16:9 / L.Box aspect ratio supported
•
Acer ColorBoost technology delivers vivid, life-like images
•
High brightness and contrast ratio
•
Versatile display modes (Bright, Presentation, Standard, Video, Picture,
Game, Education, User) enable optimum performance in any situation
•
NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported
•
Lower power consumption and economy (ECO) mode extends lamp life
•
Dynamic Black / Extreme Dimming functions help decrease lamp power
consumption and further extend lamp life
Dynamic Black: If turned on, the projector dynamically adjusts the power
consumption of the lamp according to the brightness of the image being
projected. When projecting darker images the power consumption will be
reduced and the contrast of the image will also be enhanced.
Extreme Dimming: The projector will decrease the power consumption of
the lamp by up to 70% when no input signal can be detected for 5
minutes.
•
Acer EcoProjection Technology delivers Intelligent power management
approach and physical efficiency improvement
•
Empowering Key reveals Acer Empowering Technology functions (Acer
eView, eTimer, ePower Management) for easy adjustment of settings
•
Advanced keystone correction delivers optimum presentations
•
Multi-language Onscreen Display (OSD) menus
•
Manual focus/zoom projection lens
•
2X digital zoom and pan move function
•
Microsoft® Windows® 2000, XP, 7, Vista®, Macintosh OS compliant
English
Introduction
English
2
Package Overview
This projector comes with all the items shown below. Check to make sure you
have them all. Contact your dealer immediately if any thing is missing.
Projector with lens cap
Power cord
VGA cable
Acer Projector
Security Card
Acer Projector
This CD contains
• User’s manual
• Quick Start Guide
• Acrobat® Reader®
www.acer.com
ENTER
BACK
PgUp
PgDn
SD/USB A HDMI/DVI LAN/WiFi
Security card
USBB
User’s guide (CD-ROM)
Remote control
Battery x 2
Carrying case
(Optional)
Quick Start Guide
Quick start guide
Dust filter
(Optional)
3
English
Projector Overview
Projector Outlook
Front / upper side
(X1211S)
(X1111/X1111H/X1111A/X1211/
X1211H/X1211K/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH)
1
1
5
5
6
6
7
7
2
2
3
3
8
4
8
4
#
Description
#
Description
1
Control panel
5
Power key and Power indicator LED
2
Projection lens
6
Zoom ring
3
Elevator button
7
Focus ring
4
Lens cap
8
Remote control receiver
Rear side
(X1111A/X1211/X1211S/X1211K/X1213P/
X1311KW/X1313PW)
(X1111H/X1211H/X1213PH/
X1313PWH)
(X1111)
#
Description
#
Description
1
USB connector
6
Audio input connector
Audio output connector
2
RS232 connector
7
3
Monitor loop-through output connector 8
Power socket
4
PC analog signal/HDTV/component
video input connector
9
Kensington™ lock port
5
S-Video input connector
Composite video input connector
10 HDMI input connector
Tilt adjusting wheel
English
4
Control Panel
1
7
2
3
8
4
9
5
10
6
3
#
Function
Description
1
LAMP
2
IR
Remote control receiver
3
Keystone
Adjusts image distortion caused by tilting
projection (±40 degrees).
4
RESYNC
Automatically synchronizes the projector
to the input source.
5
MENU
•
Launches the Onscreen Display (OSD)
menu, returns to the previous step for
the OSD menu operation or exits the
OSD menu.
•
Confirms your selection of items.
6
Power key and Power
indicator LED
Refer to the "Turning the Projector On/
Off" section.
7
TEMP
Temp Indicator LED
8
SOURCE
Chooses RGB, component video, S-Video,
composite video or HDTV source.
9
Four directional select keys
Selects items or makes adjustments to your
selection.
10 Empowering key
Lamp Indicator LED
Enables unique Acer functions: eView,
eTimer, ePower Management.
5
(X1111H/X1111A/X1211/X1211H/X1211S/
X1213P/X1213PH/X1313PW/X1313PWH)
(X1111/X1211K/
X1311KW)
ENTER
BACK
SD/USB A HDMI/DVI LAN/WiFi
#
ENTER
BACK
PgUp
PgUp
PgDn
PgDn
SD/USB A HDMI/DVI LAN/WiFi
USBB
Function
USBB
Description
1
POWER
Refer to the "Turning the Projector On/Off" section.
2
ASPECT RATIO
To choose the desired aspect ratio.
3
ZOOM
•
Zooms the projector display in or out.
•
When a USB cable is connected, it performs the
same function as the left mouse button. (For
X1111H/X1111A/X1211/X1211H/X1211S/X1211K/
X1213P/X1213PH/X1311KW/X1313PW/
X1313PWH)
4
RESYNC
5
Keystone
Four
directional
select keys
Automatically synchronizes the projector to the input
source.
Adjusts image distortion caused by tilting projection
(±40 degrees).
Selects items or makes adjustments to your selection.
6
Keypad 0~9
Press "0~9" to input a password in the "Setting" >
"Security" OSD.
7
VGA
To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p),
and YCbCr (480i/576i).
8
COMPONENT
(No function)
9
S-VIDEO
To change source to S-Video.
English
Remote Control Layout
English
6
#
Function
Description
10 HDMI™;
HDMI™/DVI
To change source to HDMI™ (or DVI) (for the model
with HDMI™ or DVI connector). (For X1111H/X1211H/
X1213PH/X1313PWH)
11 Infrared
transmitter
Sends signals to the projector.
12 Empowering key
Enables unique Acer functions: eView, eTimer,
ePower Management.
13 FREEZE
•
To pause the screen image.
•
When a USB cable is connected, it performs the
same function as the right mouse button. (For
X1111H/X1111A/X1211/X1211H/X1211S/X1211K/
X1213P/X1213PH/X1311KW/X1313PW/
X1313PWH)
14 HIDE
Press "HIDE" to hide screen image; press again to
display the image.
15 SOURCE
Chooses RGB, component video, S-Video, composite
video or HDTV source.
16 MENU
•
Launches the Onscreen Display (OSD) menu,
returns to the previous step for the OSD menu
operation or exits the OSD menu.
•
Confirms your selection of items.
17 PgUp/PgDn
For computer mode only. Use this button to select the
next or previous page. This function is only available
when connected to a computer via a USB cable. (For
X1111H/X1111A/X1211/X1211H/X1211S/X1211K/
X1213P/X1213PH/X1311KW/X1313PW/X1313PWH)
18 VIDEO
To change source to Composite video.
19 MUTE
To turn on/off the volume.
20 WIRELESS;
LAN/WiFi
(No function)
21
(No function)
Rewind
Play/Pause
Stop
Fast-forward
22 SD/USB A
(No function)
23 USB B
(No function)
(X1111/X1211K/X1311KW)
(X1111H/X1111A/X1211/
X1211H/X1211S/X1213P/
X1213PH/X1313PW/X1313PWH)
7
English
Getting Started
Connecting the Projector
VGA
RS232
DVD player,
Set-top box,
HDTV receiver
Display
Video/S-Video
Output
Speakers
#
1
Description
Power cord
#
6
Description
S-Video cable
2
VGA cable
7
RS232 cable
3
VGA to component video/HDTV
adapter
8
USB cable
4
Composite video cable
9
3 RCA component cable
5
Audio cable
10 HDMI cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
English
8
Turning the Projector On/Off
Turning On the Projector
1
Remove the lens cap.
2
Ensure that the power cord and signal cable are securely connected.
The Power LED will light red.
3
Turn on the projector by pressing
(POWER) on the control panel or
remote control, and the Power indicator LED will turn blue.
4
Turn on your source (computer, notebook, video player, etc.). The
projector will detect your source automatically.
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect to multiple sources at the same time, use "SOURCE" on
the control panel or remote control, or the direct source key on the
remote control to switch between inputs.
2&3
1
Lens cap
9
1
To turn the projector off, press the power button. This message
appears:
"Please press the power button again to complete the shutdown process."
Press the power button again.
2
The LED power indicator will turn solid red to indicate standby mode.
3
It is now safe to unplug the power cord.
When Instant Resume is selected:
1
The LED power indicator will turn RED and blink rapidly after the
projector is turned off, and the fan(s) will continue to operate for
about 2 minutes to ensure that the system cools properly.
2
As long as the power cord remains plugged in, you can press the
power button to turn the projector immediately back on anytime
during the 2-minute shutdown process.
3
Once the system has finished cooling, the LED power indicator will
stop blinking and turn solid red to indicate standby mode.
4
It is now safe to unplug the power cord.
Warning indicators:
•
"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp will automatically turn off, the projector will automatically
shut down, and the LED temp indicator will turn solid red. Contact
your local dealer or service center.
•
"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and
the LED lamp indicator turns solid red, contact your local
reseller or service center.
English
Turning Off the Projector
English
10
Adjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1
Press the elevator button.
2
Raise the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1
Press the elevator button.
2
Lower the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use Tilt adjusting wheel to fine-tune the display angle.
1
Elevator
button
2
Elevator foot
3
Tilt adjusting wheel
11
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
X1111/X1111H/X1111A/X1211/X1211H/X1211K/X1213P/X1213PH
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 72" and 79".
•
Note: Remind as below figure, the space of 132 cm height is
required when the projector is located at 3 m distance.
Max
scre
Min
en s
iz
scre
e
en s
iz
79"
e
72"
Height:
121 cm
Height:
132 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
From
base
to
From base to
Distance Diagonal
Diagonal
top of image
top of image
(m)
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
(cm)
(cm)
<A>
<B>
<B>
<C>
<C>
1.5
36
74 x 55
60
40
81 x 60
67
2
48
98 x 74
80
53
108 x 81
89
2.5
60
123 x 92
101
66
134 x 101
111
3
72
147 x 110
121
79
161 x 121
132
3.5
84
172 x 129
141
93
188 x 141
156
4
96
196 x 147
161
106
215 x 161
178
4.5
108
221 x 165
181
119
242 x 181
199
5
120
245 x 184
201
132
269 x 202
221
6
144
294 x 221
241
159
323 x 242
267
7
168
343 x 257
282
185
376 x 282
310
8
192
392 x 294
322
212
430 x 323
355
9
216
441 x 331
362
238
484 x 363
399
10
241
490 x 368
404
265
538 x 403
444
11
265
539 x 404
444
291
591 x 444
488
12
289
588 x 441
484
318
645 x 484
533
Zoom Ratio: 1.1 x
English
How to Optimize Image Size and Distance
English
12
X1311KW/X1313PW/X1313PWH
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 84" and 93".
•
Note: Remind as below figure, the space of 142 cm height is
required when the projector is located at 3 m distance.
Ma x
scre
Min
en s
iz
scre
e
en s
iz
93"
e
84"
Height:
128 cm
Height:
142 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
From base to
From base to
Distance Diagonal
Diagonal
top of image
top of image
(m)
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
(cm)
(cm)
<A>
<B>
<B>
<C>
<C>
1.5
42
91 x 57
64
46
100 x 63
70
2
56
121 x 76
85
62
133 x 83
94
2.5
70
152 x 95
107
77
167 x 104
117
3
84
182 x 114
128
93
200 x 125
142
3.5
98
212 x 133
149
108
233 x 146
165
4
113
242 x 152
172
124
267 x 167
189
4.5
127
273 x 170
194
139
300 x 188
212
5
141
303 x 189
215
155
333 x 208
236
6
169
364 x 227
258
186
400 x 250
283
7
197
424 x 265
300
217
467 x 292
331
8
225
485 x 303
343
248
533 x 333
378
9
253
545 x 341
386
279
600 x 375
425
10
281
606 x 379
428
310
667 x 417
472
11
310
667 x 417
472
340
733 x 458
518
Zoom Ratio: 1.1 x
13
Note: Remind as below figure, the space of 262 cm height is
required when located at 3 m distance.
Max
scre
Min
en s
iz
scre
e
en s
iz
164"
e
137"
Height:
219 cm
Height:
262 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Desired
From base to
Distance Diagonal
top of image
(m)
(inch) W (cm) x H (cm)
(cm)
<A>
<B>
<C>
Maximum Screen Size (Max zoom)
Diagonal
(inch)
<B>
From base to
W (cm) x H top of image
(cm)
(cm)
<C>
1
46
93 x 69
74
55
111 x 83
88
1.5
68
139 x 104
109
82
167 x 125
131
174
2
91
185 x 139
146
109
222 x 167
2.5
114
231 x 174
182
137
278 x 208
219
3
137
278 x 208
219
164
333 x 250
262
3.5
159
324 x 243
254
191
389 x 292
306
4
182
370 x 278
291
219
444 x 333
350
4.5
205
417 x 313
328
246
500 x 375
394
5
228
463 x 347
365
273
556 x 417
437
6
273
556 x 417
437
328
667 x 500
525
Zoom Ratio: 1.2 x
English
X1211S
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 137" and 164".
•
English
14
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
X1111/X1111H/X1111A/X1211/X1211H/X1211K/X1213P/X1213PH
To obtain an image size of 70", set the projector at a distance between 2.6 m
and 2.9 m from the screen and adjust the zoom level accordingly.
•
70"
Desired
image size
Height:
117 cm
From base
to top of
image
2.6 m
2.9 m
Desired Image Size
Diagonal (inch)
<A>
W (cm) x H (cm)
Desired distance
Distance (m)
Max zoom
<B>
Min zoom
<C>
Top (cm)
From base to top of
image < D >
40
81 x 61
1.5
1.7
67
50
102 x 76
1.9
2.1
84
60
122 x 91
2.3
2.5
101
70
142 x 107
2.6
2.9
117
80
163 x 122
3.0
3.3
134
90
183 x 137
3.4
3.7
151
100
203 x 152
3.8
4.2
168
120
244 x 183
4.5
5.0
201
150
305 x 229
5.7
6.2
251
180
366 x 274
6.8
7.5
302
200
406 x 305
7.6
8.3
335
250
508 x 381
9.4
10.4
419
300
610 x 457
11.3
Zoom Ratio: 1.1 x
503
15
70"
Desired
image size
Height:
107 cm
From base
to top of
image
2.3 m
2.5 m
Desired Image Size
Diagonal (inch)
<A>
W (cm) x H (cm)
Desired distance
Distance (m)
Max zoom
<B>
Min zoom
<C>
Top (cm)
From base to top of
image < D >
40
86 x 54
1.3
1.4
61
50
108 x 67
1.6
1.8
76
60
129 x 81
1.9
2.1
91
70
151 x 94
2.3
2.5
107
80
172 x 108
2.6
2.8
122
90
194 x 121
2.9
3.2
137
100
215 x 135
3.2
3.6
152
120
258 x 162
3.9
4.3
183
150
323 x 202
4.8
5.3
229
180
388 x 242
5.8
6.4
274
200
431 x 269
6.5
7.1
305
250
538 x 337
8.1
8.9
381
300
646 x 404
9.7
Zoom Ratio: 1.1 x
457
English
X1311KW/X1313PW/X1313PWH
To obtain an image size of 70" set the projector at a distance between 2.3 m
and 2.5 m from the screen and adjust the zoom level accordingly.
•
English
16
X1211S
To obtain an image size of 70" set the projector at a distance between 1.3 m
and 1.5 m from the screen and adjust the zoom level accordingly.
•
70"
Desired
image size
Height:
112 cm
From base
to top of
image
1.3 m
1.5 m
Desired Image Size
Diagonal (inch)
<A>
Desired distance
Distance (m)
Top (cm)
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
From base to top of
image < D >
50
102 x 76
0.9
1.1
80
60
122 x 91
1.1
1.3
96
70
142 x 107
1.3
1.5
112
80
163 x 122
1.5
1.8
128
90
183 x 137
1.6
2.0
144
100
203 x 152
1.8
2.2
160
120
244 x 183
2.2
2.6
192
150
305 x 229
2.7
3.3
240
180
366 x 274
3.3
4.0
288
200
406 x 305
3.7
4.4
320
250
508 x 381
4.6
5.5
400
300
610 x 457
5.5
Zoom Ratio: 1.2 x
480
17
English
User Controls
Installation Menu
The Installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No
signal input" is displayed on the screen.
1
Turn on the projector by pressing
remote control.
(POWER) on the control panel or
2
Press "MENU" on the control panel or remote control to launch the
OSD for projector installation and maintenance.
(X1111)
(X1111H/X1111A/X1211/X1211H/
X1211S/X1211K/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH)
3
4
The background pattern acts as a guide to adjusting the calibration
and alignment settings, such as screen size and distance, focus and
more.
The Installation menu includes the following options:
•
Projection method
•
Menu location
•
Keystone settings
•
Language settings
•
Reset to factory default functions
Use the up and down arrow keys to select an option, the left and right arrow keys to
adjust selected option settings, and the right arrow key to enter a submenu for
feature setting. The new settings will be saved automatically upon exiting the menu.
5
Press "MENU" anytime to exit the menu and return to the Acer
welcome screen.
English
18
Acer Empowering Technology
Empowering
Key
Acer Empowering Key provides three
Acer unique functions: "Acer eView
Management", "Acer eTimer
Management", and "Acer ePower
Management". Press " " for more
than one second to launch the
Onscreen Display main menu to modify
its function.
Acer eView Management
Press " " to launch "Acer eView
Management".
"Acer eView Management" is for
display mode selection. Please refer to
the "Onscreen Display (OSD) Menus"
section for more details.
Acer eTimer Management
Press " " to launch "Acer eTimer
Management".
"Acer eTimer Management" provides
the reminding function for
presentation time control. Please refer
to the "Onscreen Display (OSD) Menus"
section for more details.
Acer ePower Management
Press " " to launch "Acer ePower
Management".
"Acer ePower Management"provides
you one shortcut to save the lamp and
projector’s life. Please refer to the
"Onscreen Display (OSD) Menus"
section for more details.
19
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the control panel or remote
control.
•
When the OSD is displayed, use
to select an item in the main menu.
After selecting the desired main menu item, press
for feature setting.
•
Use
to enter a submenu
to select the desired item and adjust the settings by using
.
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "MENU" on the control panel or remote control, the screen will
return to the main menu.
•
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
new settings.
Main menu
Setting
Submenu
English
Onscreen Display (OSD) Menus
English
20
Color
There are many factory presets optimized for various types
of images.
Display Mode
Wall Color
•
Bright: For brightness optimization.
•
Presentation: For meeting presentation with higher
brightness.
•
Standard: For common environment.
•
Video: For playing video in a bright environment.
•
Picture: For graphic picture.
•
Game: For game content.
•
Education: For education environment.
•
User: Memorize user’s settings.
Use this function to choose a proper color according to the
wall. There are several choices, including White, Light
Yellow, Light Blue, Pink and Dark Green. It will
compensate the color deviation due to the wall color to
show the correct image tone.
Adjusts the brightness of the image.
Brightness
Contrast
•
Press
to darken the image.
•
Press
to lighten the image.
Controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast
changes the amount of black and white in the image.
•
Press
to decrease the contrast.
•
Press
to increase the contrast.
21
Adjusts the color temperature. At higher color
temperatures, the screen looks colder; at lower color
temperatures, the screen looks warmer.
Degamma
Effects the representation of dark scenery. With greater
gamma value, dark scenery will look brighter.
Color R
Adjusts the red color.
Color G
Adjusts the green color.
Color B
Adjusts the blue color.
Adjusts a video image from black and white to fully
saturated colors.
Saturation
•
Press
image.
to decrease the amount of color in the
•
Press
image.
to increase the amount of color in the
Adjusts the color balance of red and green.
Tint
Dynamic Black
•
Press
image.
to increase the amount of green in the
•
Press
to increase the amount of red in the image.
If turned on, the projector dynamically adjusts the power
consumption of the lamp according to the brightness of
the image being projected. When projecting darker
images the power consumption will be reduced and the
contrast of the image will also be enhanced.
Note: "Saturation" and "Tint" functions are not supported under computer
mode.
English
Color
Temperature
English
22
Image
(X1111H/X1111A/X1211/X1211H/
X1211S/X1211K/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH)
(X1111)
Projection
(X1111)
•
Front-Desktop: The factory default setting.
•
Front-Ceiling: When you select this function, the
projector inverts the image for ceiling-mounted
projection.
•
Rear-Desktop: When you select this function, the
projector reverses the image so that you can project
behind a translucent screen.
•
Rear-Ceiling: When you select this function, the
projector reverses and inverts the image at same time.
You can project from behind a translucent screen with
ceiling mounted projection.
Projection
•
Mode
(X1111H/
•
X1111A/X1211/
X1211H/X1211S/
X1211K/X1213P/
X1213PH/
X1311KW/
X1313PW/
X1313PWH)
Front: The factory default setting.
Rear: Reverses the image so you can project from
behind a translucent screen.
23
Auto: Automatically adjusts projection location of
image.
Desktop
Ceiling: Turns the image upside down for ceilingmounted projection.
Use this function to choose your desired aspect ratio.
Aspect Ratio
Keystone
(X1111)
•
Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
•
Full (X1313PW/X1313PWH): The image will be displayed
making full use of the horizontal and vertical pixels.
•
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
•
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
•
L.Box (X1313PW/X1313PWH): Keeps the original signal
aspect ratio and zooms in by 1.333 times.
Adjusts image distortion caused by tilting projection (±40
degrees).
Auto Keystone Automatically adjusts image distortion caused by tilting
projection (±40 degrees).
(X1111H/
X1111A/X1211/
X1211H/X1211S/
X1211K/X1213P/
X1213PH/
X1311KW/
X1313PW/
X1313PWH)
Manual
Keystone
(for X1111H/
X1111A/X1211/
X1211H/X1211S/
X1211K/X1213P/
X1213PH/
X1311KW/
X1313PW/
X1313PWH)
Manually adjusts image distortion caused by tilting
projection (±40 degrees).
<Note> The Manual Keystone function is unavailable under
Auto Keystone setting to "On".
English
Projection
•
Location
(X1111H/
X1111A/X1211/ •
X1211H/X1211S/
X1211K/X1213P/ •
X1213PH/
X1311KW/
X1313PW/
X1313PWH)
English
24
Adjusts the sharpness of the image.
Sharpness
H. Position
(Horizontal
Position)
V. Position
(Vertical
Position)
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
•
Press
to move the image left.
•
Press
to move the image right.
•
Press
to move the image down.
•
Press
to move the image up.
Frequency
Changes the projector’s refresh rate to match the frequency
of your computer’s graphics card. If you experience a vertical
flickering bar in the projected image, use this function to
correct it.
Tracking
Synchronizes the signal timing of the display with the
graphics card. If you experience an unstable or flickering
image, use this function to correct it.
Selects "NVIDIA 3D Vision" or "DLP 3D" to enable the 3D
function supported by NVIDIA or TI DLP 3D technology.
NVIDIA 3D Vision (X1111)
Select this item while using NVIDIA 3D glasses, IR emitter,
NVIDIA graphics card and NVIDIA compliant 3D games or 3D
movies with corresponding SW player. Please visit NVIDIA
URL (http://www.nvidia.com/object/
3D_Vision_Requirements.html) to check detailed system
configuration.
•
3D
DLP 3D
Select this item while using DLP 3D glasses, quad buffer
(NVIDIA/ATI...) graphics card and HQFS format file or DVD
with corresponding SW player.
•
Off
Turns off the 3D mode.
•
3D Sync Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
Choose "On" to display the 3D warning message.
3D Warning
Message
25
Note: "Sharpness" function is not supported under computer mode.
Note: Supported 3D signal timings:
Signal source type
Supported timing
Video/S-Video/Component video
NTSC, PAL
VGA
640 x 480@100Hz, 640 x 480@120Hz,
800 x 600@100Hz, 800 x 600@120Hz,
1024 x 768@100Hz, 1024 x 768@120Hz
DVI
HDMI (PC)
HDMI (Video)
NTSC, PAL
While using NVIDIA 3D Vision, please download and install the latest
NVIDIA 3D Vision driver from NVIDIA web site for your graphics card to
support this projector.
It needs correct settings on graphics card 3D application program for correct
3D display.
The SW players, such as Stereoscopic Player and DDD TriDef Media Player
can support 3D format files. You can download these players on the web
page below.
- NVIDIA Stereoscopic 3D Video Player: http://www.nvidia.com/object/
3D_Drivers_Downloads.html
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef3-D-Experience-4.0.2.html
Note: "3D Sync Invert" is only available when 3D is enabled.
English
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under video mode.
English
26
Setting
(X1111H/X1211H/X1213PH/
X1313PWH)
(X1111)
(X1111A/X1211/X1211S/X1211K/
X1213P/X1311KW/X1313PW)
Menu Location
HDMI Color
Range
(X1111H/
X1211H/
X1213PH/
X1313PWH
only)
HDMI Scan Info
(X1111H/
X1211H/
X1213PH/
X1313PWH
only)
Chooses the OSD menu location on the display screen.
Adjusts the color range of the HDMI image data to prevent
color display error.
•
Auto: Automatically adjusts the color range by
information from the player.
•
Limited Range: Processes the input image as limited color
range data.
•
Full Range: Processes the input image as full color range
data.
Adjusts the overscan ratio of the HDMI image on screen.
•
Auto: Automatically adjusts the overscan ratio by
information from the player.
•
Underscan: Always no overscan on the HDMI image.
•
Overscan: Always keep overscan on the HDMI image.
27
Security
This projector provides a useful security function for the
administrator to manage the projector.
Press
Security
to change the "Security" setting. If the security
function is enabled, your must enter "Administrator
Password" first before changing the security setting.
The factory default of "Administrator Password" is
"1234".
•
Select "On" to enable the security function. You have to
enter password depending on the "Security Mode".
Please refer to "User Password" section for details.
•
If "Off" is selected, you can switch on the projector
without password.
Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
•
Press
to select timeout duration.
•
The range is from 10 to 990 minutes.
•
When time is up, the projector will request you to enter
the password again.
•
The factory default setting of "Timeout (Min.)" is "Off".
•
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.
English
Closed Caption
Selects a preferred closed captioning mode from CC1, CC2,
CC3, CC4, (CC1 displays captions in the primary language in
your area). Select "Off" to turn off the captioning feature.
This function is only available when a composite video or SVideo input signal is selected and its system format is NTSC.
28
English
User Password
•
Press
to set up or change "User Password".
•
Use the numerical keys on the remote control to set the
password and press "MENU" to confirm.
•
To delete the digits, Press
•
Enter the password again when you see "Confirm
Password" displayed.
•
The password should be 4~8 digits in length.
•
If you select "Request password only after plugging
power cord", you are requested to input the password
every time the power cord is plugged.
•
If you select "Always request password while projector
turns on", you are requested to input the password every
time the projector is turned on.
.
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
•
Press
to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
If you forget your administrator password, do the following
to retrieve the administrator password:
•
VGA OUT
(Standby)
(X1111H/
X1111A/X1211/
X1211H/X1211S/
X1211K/X1213P/
X1213PH/
X1311KW/
X1313PW/
X1313PWH)
Reset
•
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
•
If the Security Card is lost, please contact your local Acer
service center.
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
devices.
Enabling this function slightly increases the standby
power consumption.
Press
after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
29
English
Management
ECO Mode
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
High Altitude
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
•
Instant Off: Enables you to turn off the projector
immediately without fan cooling process by pressing
the power button twice.
•
Instant Resume: Enables you to restart the projector
immediately within 2 minutes after turning it off.
Turn Off Mode
Auto Shutdown
(Minutes)
The projector will automatically shut down while there is
no signal input detected after the setting time.
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Lamp Hour Reset
Choose this function to show or hide warning message
when the changing lamp message is displayed. The
message will show up 30 hours before end of life.
Press
after choosing "Yes" to turn the lamp hour
counter to 0 hours.
English
30
Audio
(X1111H/X1111A/X1211/X1211H/
X1211S/X1211K/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH only)
Volume
Mute
•
Press
to decrease the volume.
•
Press
to increase the volume.
•
Choose "On" to turn mute on.
•
Choose "Off" to turn mute off.
Timer
(X1111H/X1111A/X1211/X1211H/
X1211S/X1211K/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH)
(X1111)
Timer Location
Sets the location of the timer on the screen.
Timer Start (or
Stop)
Press
Timer Period
(Minutes)
Press
to start or stop the timer.
to adjust the timer period.
31
Select this function to adjust the notification volume
when the timer function is enabled and time is up.
Timer Display
Press
to choose a timer display mode.
Language
Language
Sets a language for the OSD menus. Use
select your preferred language.
•
Press
to confirm the selection.
to
English
Timer Volume
(X1111H/X1111A/
X1211/X1211H/
X1211S/X1211K/
X1213P/X1213PH/
X1311KW/
X1313PW/
X1313PWH)
English
32
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
1
2
Problem
No image appears
onscreen
Partial, scrolling
or incorrectly
displayed image
(For PC (Windows
95/98/2000/XP/
Win7/Vista))
Solution
•
Make sure all the cables are correctly connected as
described in the "Getting Started" section.
•
Ensure none of the connector pins are bent or
broken.
•
Check if the projection lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
•
Press "RESYNC" on the control panel or remote
control.
For an incorrectly displayed image:
•
Open "My Computer > Control Panel," and
then double-click the "Display" icon.
•
Select the "Settings" tab.
•
Verify that your display resolution setting is
lower than or equal to 1600 x 1200, 1920 x
1080.
•
Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
Verify that the resolution setting is lower than
or equal to 1600 x 1200, 1920 x 1080.
•
Click the "Change" button under the
"Monitor" tab.
•
Click "Show all devices > Standard monitor
types" under the SP box, and choose the
resolution mode you need under the "Models"
box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to 1600
x 1200, 1920 x 1080.
•
33
4
5
6
7
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
The screen of the
notebook
computer is not
displaying your
presentation
Image is unstable
or flickering
Image has vertical
flickering bar
Image is out of
focus
•
Press "RESYNC" on the control panel or remote
control.
•
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
•
If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•
If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On."
•
Use "Tracking" to correct it. Refer to the "Image"
section for more information.
•
Change the display color setting on your computer.
•
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
•
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
•
•
•
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance:
X1111/X1111H/X1111A/X1211/X1211H/X1211K/
X1213P/X1213PH: 4.9 to 37 feet (1.5 to 11.3 meters)
X1311KW/X1313PW/X1313PWH: 4.3 to 32 feet (1.3
to 9.7 meters)
X1211S: 3 to 18 feet (0.9 to 5.5 meters)
Refer to the "How to Get a Preferred Image Size by
Adjusting Distance and Zoom" section for more
information.
English
3
English
34
8
9
10
11
Image is stretched
when displaying a
"widescreen"
DVD title
Image is too small
or too large
Image has slanted
sides
Image is reversed
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 with the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
•
•
Adjust the zoom lever on the top of the projector.
•
Press "MENU" on the control panel or remote
control. Go to "Image" > "Aspect Ratio" and try
different settings.
•
If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
•
Press the Keystone correction keys on the control
panel or remote control until the image becomes
square.
•
Press "MENU" on the control panel or remote
control to open the OSD menu. Go to "Image" >
"Auto Keystone" or "Image" > "Manual Keystone"
to make adjustments.
•
Select "Image" > "Projection Mode", "Image" >
"Projection Location" on the OSD and adjust the
projection direction.
Move the projector closer to or further from the
screen.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
35
#
1
Condition
Message
Message Reminder
Fan Fail - the system fan is not working.
Fan Fail.
Lamp will automatically turn off soon.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it is used. Please also check the dust filters if
they are installed. If the dust filter is clogged with dust, please
clean it.
Projector Overheated.
Lamp will automatically turn off soon.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!
English
OSD Messages
English
36
LED & Alarm Definition Listing
LED Messages
Message
Power LED
LAMP LED
TEMP LED
Red
Blue
Red
Red
Standby
(Power cord plugged in)
V
--
--
--
Power on
--
V
--
--
Lamp retry
--
Quick
flashing
--
--
Turning off (Cooling
state)
Quick
flashing
--
--
--
Turning off (Cooling
completed)
V
--
--
--
Error (Thermal failure)
--
V
--
V
Error (Fan lock failure)
--
V
--
Quick
flashing
Error (Lamp breakdown)
--
V
V
--
Error (Color wheel
failure)
--
V
Quick
flashing
--
37
Use a screwdriver to remove the screw(s) from the cover, and then pull out the
lamp.
The projector will detect the lamp life itself. It will show you a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement Suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooled down for at least 45
minutes before changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool down before
changing lamp!
5
3
2
1
4
1
2
1
2
7
6
8
8
1
8
To remove the lamp:
1
Turn the projector off by pressing
(POWER).
2
Allow the projector at least 45 minutes to cool down.
3
Disconnect the power cord.
4
Use a screwdriver to remove the screws from the cover. (Illustration #1)
5
Push up and remove the cover.
6
Remove and dispose of the lamp protection film (Illustration #2).
7
Remove the screw that secures the lamp module (Illustration #3).
8
Lift the handle so that it stands up. Pull out the lamp module by force
(Illustration #4).
To replace the lamp module, use a new lamp and follow illustrations #
5
-#8 .
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
English
Replacing the Lamp
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
m
m
m
13 m
20
1
.9
49mm
130 mm
mm
8.4
English
38
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Short Rod
Long Rod
Extension Rod
Screw Type A
50 mm length / 8 mm diameter -
Large Cylinder Cap
Allen Key
- For tighten/loosen
Tightening Screw
Medium Rod
39
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Large Washer
Smaller Washer
Projector Bracket
Supports projector and
allows for adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Tightening Screw
Large Cylinder Cap
Screw Type A
50 mm length /8 mm diameter
Allen Key
- For tighten/loosen
English
3
5
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
30
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 3 mm diameter screws are enclosed in
the screw pack.
Models
Screw Type B
Washer Type
Diameter (mm)
Length (mm)
Large
Small
3
25
V
V
137 mm
23 mm
116.3 mm
X1111/X1111H/X1111A/
X1211/X1211H/X1211S/
X1211K/X1213P/
X1213PH/X1311KW/
X1313PW/X1313PWH
80 mm
English
40
41
The specifications below are subject to change without notice. For final specs,
please refer to Acer's marketing documentation.
Projection system
DLP™
Resolution
•
X1111/X1111H/X1111A:
Native: SVGA (800 x 600)
Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)
X1211/X1211H/X1211S/X1211K/X1213P/
X1213PH:
Native: XGA (1024 x 768)
Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)
•
X1311KW/X1313PW/X1313PWH:
Native: WXGA (1280 x 800)
Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)
•
Computer compatibility
Refer to the "Compatibility Modes" section for more
information.
Video compatibility
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p,
576p), SDTV (480i, 576i)
Aspect ratio
•
X1111/X1111J/X1111A/X1211/X1211H/X1211S/
X1211K/X1213P/X1213PH:
4:3 (native), 16:9
X1311KW/X1313PW/X1313PWH:
4:3, 16:9, Full, Letter Box
•
Displayable colors
1.07 billion colors
Projection lens
•
X1111/X1111H/X1111A/X1211/X1211H/X1211K/
X1213P/X1213PH:
F = 2.56 - 2.8, f = 21.00 mm - 23.00 mm,
1:1.1 Manual Zoom and Manual Focus
X1211S:
F = 2.6 - 2.78, f = 10.20 mm - 12.24 mm,
1:1.2 Manual Zoom and Manual Focus
•
X1311KW/X1313PW/X1313PWH:
F = 2.56 - 2.8, f = 21.00 mm - 23.00 mm,
1:1.1 Manual Zoom and Manual Focus
•
Projection screen size (diagonal)
X1111/X1111H/X1111A/X1211/X1211H/X1211K/
X1213P/X1213PH:
35" (89 cm) - 159" (404 cm)
•
X1211S:
32" (81 cm) - 195" (495 cm)
•
X1311KW/X1313PW/X1313PWH:
42" (107 cm) - 186" (472 cm)
•
English
Specifications
English
42
Projection distance
X1111/X1111H/X1111A/X1211/X1211H/X1211K/
X1213P/X1213PH:
4.9' (1.5 m) - 37' (11.3 m)
•
X1211S:
3' (0.9 m) - 18' (5.5 m)
•
X1311KW/X1313PW/X1313PWH:
4.3' (1.3 m) - 32' (9.7 m)
•
Throw ratio
•
X1111/X1111H/X1111A/X1211/X1211H/X1211K/
X1213P/X1213PH: 53" @ 2 m (1.86 - 2.04 : 1)
•
•
X1211S: 55" @ 1 m (0.9 - 1.08 : 1)
X1311KW/X1313PW/X1313PWH: 63" @ 2 m (1.5 1.65 : 1)
Horizontal scan rate
31 - 99 kHz
Vertical refresh scan rate
48 - 120 Hz
Keystone correction
•
X1111:
+/-40 Degrees (Vertical), Manual
X1111H/X1111A/X1211/X1211H/X1211S/X1211K/
X1213P/X1213PH/X1311KW/X1313PW/
X1313PWH:
+/-40 Degrees (Vertical), Manual & Auto
•
Digital zoom
2X
Audio
•
•
X1111: N/A
•
X1111H/X1211H: 10W x 1
•
X1111/X1111H/X1111A/X1211/X1211H/X1211K/
X1213P/X1213PH/X1311KW/X1313PW/
X1313PWH:
Approximate 2.6 kg (5.73 lbs.)
•
X1211S: Approximate 2.7 kg (5.95 lbs.)
Weight
X1111A/X1211/X1211S/X1213P/X1213PH/
X1311KW/X1313PW/X1313PWH: 2W x 1
Dimensions (W x D x H)
280 x 230 x 84 mm (11.0" x 9.1" x 3.3")
Power supply
Universal AC input 100 - 240 V, input frequency 50/60
Hz
Power consumption (typical)
•
X1111/X1111H/X1111A/X1211/X1211H/X1211S/
X1311KW: 287 W
•
•
X1211K: 291 W
Operating temperature
X1213P/X1213PH/X1313PW/X1313PWH: 348 W
0ºC to 35ºC / 32ºF to 95ºF
43
•
•
•
•
•
Power socket x 1
RS232 x 1
VGA input x 1
Composite video x 1
S-Video x 1
Below items are for X1111A/X1211/X1213P/
X1211S/X1211K/X1311KW/X1313PW only.
•
•
•
•
•
3.5 mm audio jack input x 1
3.5 mm audio jack output x 1
VGA input x 2
VGA output x 1
USB x 1 (Type mini B)
Below items are for X1111H/X1211H/X1213PH/
X1313PWH only.
Standard package contents
Accessory (optional)
•
HDMI 1.3 input x 1
•
•
•
•
•
•
•
AC power cord x 1
•
•
•
Composite video cable x 1
VGA cable x 1
Remote control x 1
Battery x 2 (for the remote control)
User's guide (CD-ROM) x 1
Quick start guide x 1
Security card x 1
Carrying case x 1
Dust filter x 1
* Design and specifications are subject to change without notice.
English
I/O connectors
English
44
Compatibility Modes
1
VGA Analog - PC Signal
Mode
VGA
SVGA
XGA
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
SXGA
1280 x 1024
V.Frequency [Hz]
H.Frequency
[KHz]
60
31.47
72
37.86
75
37.50
85
43.27
120
61.91
56
35.20
60
37.88
72
48.08
75
46.88
85
53.67
120
77.42
60
48.36
70
56.48
75
60.02
85
68.67
120
98.96
70
63.80
75
67.50
85
77.10
60
63.98
72
76.97
75
79.98
85
91.15
1280 x 960
60
60.00
1280 x 960
75
75.00
SXGA+
1400 x 1050
60
65.32
UXGA
1600 x 1200
60
75.00
640 x 480
60
31.50
640 x 480
66.6 (67)
35.00
QuadVGA
PowerBook G4
800 x 600
60
37.88
1024 x 768
60
48.36
1152 x 870
75
68.68
1280 x 960
75
75.20
45
WXGA
2
1024 x 768
75
60.30
1280 x 768
60
47.78
1280 x 768
75
60.29
1280 x 768
85
68.63
1280 x 720
60
44.80
1280 x 800
60
49.60
1440 x 900
60
55.90
1680 x 1050
60
65.30
1366 x 768
60
47.71
1920 x 1080-RB
60
66.60
1920 x 1080-EIA
60
66.60
1024 x 600
60
37.30
HDMI - PC Signal (For X1111H/X1211H/X1213PH/X1313PWH)
Mode
Resolution
640 x 480
VGA
720 x 400
SVGA
XGA
800 x 600
1024 x 768
V.Frequency [Hz]
H.Frequency
[KHz]
60
31.47
72
37.86
75
37.50
85
43.27
120
61.91
70
31.47
85
37.93
56
35.20
60
37.88
72
48.08
75
46.88
85
53.67
120
77.43
60
48.36
70
56.48
75
60.02
85
68.67
120
98.96
English
i Mac DV(G3)
46
63.80
75
67.50
85
77.10
60
63.98
72
76.97
75
79.98
85
91.15
1280 x 960
60
60.00
1280 x 960
75
75.00
SXGA+
1400 x 1050
60
65.32
UXGA
1600 x 1200
60
75.00
640 x 480
60
31.50
640 x 480
66.6 (67)
35.00
800 x 600
60
37.88
English
70
1152 x 864
SXGA
1280 x 1024
QuadVGA
PowerBook G4
i Mac DV(G3)
WXGA
3
832 x 624
75
49.72
1024 x 768
60
48.36
1152 x 870
75
68.68
1280 x 960
75
75.20
1024 x 768
75
60.30
1280 x 768
60
47.78
1280 x 768
75
60.29
1280 x 768
85
68.63
1280 x 720
60
44.80
1280 x 800
60
49.60
1440 x 900
60
55.90
1680 x 1050
60
65.30
1366 x 768
60
47.71
1920 x 1080-RB
60
66.60
1920 x 1080-EIA
60
66.60
1024 x 600
60
37.30
HDMI - Video Signal (For X1111H/X1211H/X1213PH/X1313PWH)
Mode
480i
480p
576i
576p
720p
Resolution
720 x 480
(1440 x 480)
720 x 480
720 x 576
(1440 x 576)
720 x 576
1280 x 720
V.Frequency [Hz]
H.Frequency [KHz]
59.94 (29.97)
27.00
59.94
31.47
50 (25)
27.00
50
60
31.25
45.00
47
4
50
60 (30)
50 (25)
60
50
24
23.98
37.50
33.75
33.75
67.50
56.26
27.00
26.97
Resolution
720 x 480
720 x 480
720 x 576
720 x 576
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
V.Frequency [Hz]
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
60.00
50.00
24.00
23.98
H.Frequency [KHz]
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
67.5
56.26
27.00
26.97
YPbPr Signal
Mode
480i
480p
576i
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
1080p
5
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
Video, S-Video Signal
Mode
V.Frequency [Hz]
H.Frequency [KHz]
fsc (MHz)
NTSC
15.73
60
3.58
PAL
15.63
50
4.43
SECAM
15.63
50
4.25 or 4.41
PAL-M
15.73
60
3.58
PAL-N
15.63
50
3.58
PAL-60
15.73
60
4.43
NTSC4.43
15.73
60
4.43
English
720p
1080i
1080i
1080p
1080p
1080p
1080p
English
48
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby, declares that this projector series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
English
Remarque à l'intention des utilisateurs canadiens
English
49
English
50
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact a local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.it
Hereby declare that:
Product:
Trade Name:
Model Number:
Machine Type:
Projector
Acer
QSV1032/QSV1035/QSV1033/QNX1030/QNX1034/QNX1031/
QNX1038/QNX1028/QNX1036/QWX1037/QWX1029/QWX1036
series
X1111/X1111H/X1111A/X1211/X1211H/X1211S/X1211K/X1213P/
X1213PH/X1311KW/X1313PW/X1313PWH series
Is compliant with the essential requirements and other relevant provisions of the following EC
directives, and that all the necessary steps have been taken and are in force to assure that production
units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:
-. EN55022, AS/NZS CISPR22, Class B
-. EN55024
-. EN61000-3-2 Class A
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized
standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in
Electrical and Electronic Equipment
-. The maximum concentration values of the restricted substances by weight in homogenous
material are:
0.1%
Polybrominated Biphenyls (PBB’s)
Mercury
Lead
0.1%
Polybrominated Diphenyl Ethers (PBDE’s)
0.1%
0.1%
Hexavalent Chromium
0.1%
Cadmium
0.01%
Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
English
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
English
51
English
52
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
The standards listed below are applied to the product if built with WLAN module or wireless
keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:
•
Article 3.1(a) Health and Safety
-. EN60950-1
-. EN62311
•
Article 3.1(b) EMC
-. EN301 489-1
-. EN301 489-17
•
Article 3.2 Spectrum Usages
-. EN300 328
-. EN301 893 (Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2010.
Easy Lai /Manager
Regulation Center, Acer Inc.
June. 11, 2011 Date
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
QSV1032/QSV1035/QSV1033/
QNX1030/QNX1034/QNX1031/
QNX1038/QNX1028/QNX1036/
QWX1037/QWX1029/QWX1036
series
Machine Type:
X1111/X1111H/X1111A/X1211/
X1211H/X1211S/X1211K/X1213P/
X1213PH/X1311KW/X1313PW/
X1313PWH series
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
English
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
English
53