[
AUTO SECURITY SYSTEM AND CONVENIENCE
M
[
O W N E R ' S
NO
ONE
DARES
G U I D E®
COME
CLOSE
]
O
D
]
E
120HV
L
Limited Lifetime
Consumer Warranty
For a period of one calendar year from the date of purchase of this auto-security
device, Directed Electronics, Inc. promises to the ORIGINAL PURCHASER to repair or
replace (with a comparable reconditioned model), free of cost, any electronic control
module which proves to be defective in workmanship or material under normal use,
SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL
AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY
INSTALLED. If warranty service is necessary you must have a clear copy of your sales
receipt containing all of the information shown on the following page.
After the first calendar year, from the date of purchase of this auto-security device,
Directed Electronics, Inc., promises to the ORIGINAL PURCHASER to repair or replace
(with a comparable reconditioned model) any electronic control module which proves
to be defective in workmanship or material under normal use FOR A CHARGE OF
$45.00, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS
ORIGINALLY INSTALLED. If warranty service is necessary you must have a clear copy
of your sales receipt containing all of the information shown on the following page.
This warranty contains the entire agreement relating to warranty and supersedes all
previous and contemporaneous representations or understandings, whether written or
oral. IN ANY EVENT, DIRECTED ELECTRONICS, INC. IS NOT LIABLE FOR THE THEFT OF
THE VEHICLE AND/OR ITS CONTENTS.
This warranty is void if the product has been damaged by accident, unreasonable use,
neglect, improper service or other causes not arising out of defects in materials or
construction. This warranty is nontransferable and does not apply to any unit that
has been modified or used in a manner contrary to its intended purpose and does not
cover batteries. The unit in question must be returned to the manufacturer, postage
prepaid. This warranty does not cover labor costs for the removal, diagnosis, troubleshooting or reinstallation of the unit. For service on an out-of-warranty product a
flat rate fee by model is charged. Contact your authorized dealer to obtain the service charge for your unit.
These systems are a deterrent against possible theft. Directed Electronics, Inc. is not
offering a guarantee or insuring against the theft of the automobile or its contents
and disclaims any liability for the theft of the vehicle and/or its contents. Directed
Electronics does not authorize any person to create for it any other obligation or liability in connection with this security system.
© 2003 Directed Electronics, Inc.
i
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF
NON-INFRINGEMENT OF PATENTS, IN THE UNITED STATES OF AMERICA AND/OR
ABROAD. NEITHER THE MANUFACTURER OR ANY ENTITIES CONNECTED THEREWITH
SHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT
NOT LIMITED TO ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, TOWING,
REPAIR, REPLACEMENT, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL
LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE
ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR
THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on
how long an implied warranty will last or the exclusion or limitation of incidental or
consequential damages. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
IMPORTANT NOTE:
This product warranty is automatically void if its date code or serial number is
defaced, missing, or altered. This warranty will not be valid unless you have completed the warranty card and mailed it to Directed Electronics, Inc. within 10 days
after purchase to the address listed on the warranty registration card.
Make sure you have all of the following information from your dealer:
A clear copy of the sales receipt, showing the following:
■
■
■
■
■
■
■
■
■
ii
Date of purchase
Your full name and address
Authorized dealer's company name and address
Type of system installed
Year, make, model and color of the automobile
Automobile license number
Vehicle identification number
All security options installed on automobile
Installation receipts
© 2003 Directed Electronics, Inc.
Table of Contents
Limited Lifetime Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
What is Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Your Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FCC/ID Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Transmitter Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warning! Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Locking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Unlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Ignition Controlled Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Short-Run/Turbo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Valet® Take-Over . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Programming Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
© 2003 Directed Electronics, Inc.
1
What is Included
■
The control module
■
A 3-button transmitter
■
A push-button programming switch
■
Your warranty card
■
A shut-down toggle switch
Important Information
Congratulations on the purchase of your remote start keyless entry
system. This system has been designed to provide years of trouble-free operation. By carefully reading this owner's guide prior to
using your system, you will maximize the use of this system and
its features. Additional or replacement copies of this guide can be
printed by accessing the Directed Electronics, Inc. internet website
at www.directed.com.
System Maintenance
The system requires no specific maintenance. Your remote is powered by a miniature 3V lithium battery that lasts approximately
one year under normal use. When the battery weakens, the LED on
the remote will dim and operating range will be reduced.
2
© 2003 Directed Electronics, Inc.
Your Warranty
Your warranty card must be completely filled out and returned
within 10 days of purchase. Your product warranty will not be honored if your warranty card is not returned. Make sure that you
receive the warranty card from your dealer.
FCC/ID Notice
This device complies with Part 15 of FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this device.
Caution
This product is designed for fuel injected, automatic transmission
vehicles only. Use of this product in a standard transmission vehicle is dangerous and contrary the product's intended use.
© 2003 Directed Electronics, Inc.
3
Transmitter Functions
The receiver uses a computer-based learn routine to learn the
transmitter buttons. This makes it possible to assign any specific
transmitter button, or combination of buttons, to any receiver
function. The transmitter initially comes programmed with the
Standard Configuration, but may also be customized by an authorized dealer. Unless otherwise specified, the buttons used in all of
the instructions in this manual correspond to a Standard
Configuration transmitter.
Standard Configuration
Button
The door locking and unlocking functions are controlled by pressing
Button
The channel 2 output or trunk release is controlled by the
button.
Button
The remote start function of your system is controlled by pressing
.
Buttons
+
When simultaneously pressed these buttons control the timer
mode.
4
© 2003 Directed Electronics, Inc.
Buttons
+
When simultaneously pressed these buttons control the tubo/short
run mode.
Using Your System
Warning! Safety First
The following safety warnings must be observed at all times:
■
Due to the complexity of this system, installation of this
product must only be performed by an authorized Directed
Electronics, Inc. dealer.
■
When properly installed, this system can start the vehicle via
a command signal from the remote control transmitter.
Therefore, never operate the system in an enclosed area or
partially enclosed area without ventilation (such as a
garage). When parking in an enclosed or partially enclosed
area or when having the vehicle serviced, the remote start
system must be disabled using the installed toggle switch. It
is the user's sole responsibility to properly handle and keep
out of reach from children all remote control transmitters to
assure that the system does not unintentionally remote start
the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE
DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO
THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIV-
© 2003 Directed Electronics, Inc.
5
ING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED
VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN
CLOSED. These precautions are the sole responsibility of the
user.
■
Use of this product in a manner contrary to its intended mode
of operation may result in property damage, personal injury,
or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the
keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the
vehicle must not remotely start while the car is in gear. This
testing should be performed by an authorized Directed
Electronics, Inc. dealer in accordance with the Safety Check
outlined in the product installation guide. If the vehicle starts
in gear, cease remote start operation immediately and consult
with the authorized Directed Electronics, Inc.dealer to fix the
problem.
■
After the remote start module has been installed, contact your
authorized dealer to have him or her test the remote start
module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing
the Neutral Safety Shutdown Circuit test, the remote start unit
has not been properly installed. The remote start module must
be removed or the installer must properly reinstall the remote
start system so that the vehicle does not start in gear. All
installations must be performed by an authorized Directed
Electronics dealer. OPERATION OF THE REMOTE START MOD-
6
© 2003 Directed Electronics, Inc.
ULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS
INTENDED MODE OF OPERATION. OPERATING THE REMOTE
START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN
PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED DIRECTED ELECTRONICS, INC.
DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE
START MODULE. DIRECTED ELECTRONICS, INC.WILL NOT BE
HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
Locking
Pressing
for one second will lock the doors. The parking lights
will flash once to confirm that the doors are locked.
Unlocking
To unlock the doors press
for one second. The parking lights
will flash twice to confirm that the doors are unlocked.
© 2003 Directed Electronics, Inc.
7
Ignition Controlled Door Locks
If power door locks have been
connected to your system,
the vehicle's door will lock
three
seconds
after
the
ignition has been turned on
and unlock when the ignition
is turned off.
NOTE: If the ignition is turned on while the vehicle is remote started the
doors will not lock until the remote start shuts off. To avoid being locked
out of the vehicle, do not turn the ignition on until you are ready to drive
the vehicle.
Remote Start
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehicle with the climate control system. If interior heating or cooling
is desired, the climate controls must be preset, and the fan blower
must be set to the desired level prior to remote starting the
vehicle.
IMPORTANT! (1) Never remotely start the vehicle with the vehicle in gear,
and (2) Never remotely start the vehicle with the key in the ignition.
To remote start the vehicle:
1.
Press
2.
The parking lights will flash to confirm remote start operation.
8
on the transmitter twice within 3 seconds.
© 2003 Directed Electronics, Inc.
3.
Once the vehicle has started, it will run for the pre-programmed period of time (12, 24, or 60 minutes) or until a shutdown input is triggered.
When you are ready to drive the vehicle:
1.
Insert the ignition key and turn it to the ON
(not the START) position.
2.
Press the brake pedal.
NOTE: If the brake pedal is pressed before the key is
in the ON position, the engine will shut down.
While the vehicle is running during remote start operation, the system will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
■
The brake pedal is pressed.
■
The hood is opened.
■
The shutdown toggle switch is put into the ON position.
■
The pre-programmed run time has elapsed.
■
The
button is pressed twice within 3 seconds.
© 2003 Directed Electronics, Inc.
9
Short-Run/Turbo
Short run turbo mode keeps the engine running after arriving at
you destination for a programmable period of 1, 3, 5 or 10 minutes. This allows the system’s timer to conveniently cool down the
turbo after you have left the vehicle.
To activate:
1.
Park the vehicle and set parking brake.
2.
Remove your foot from the brake pedal and leave the engine
running.
3.
Press and release the
and
buttons at the same
time.
4.
The lights will flash to indicate the remote start has entered
short run turbo mode.
5.
Turn off the key, the engine will keep running.
6.
Exit and secure the vehicle.
7.
The engine will turn off after the programmed run time.
Timer Mode
By pressing the remote
and
buttons the parking lights
will flash 4 times and then start the vehicle and run for the set
duration. The remote start can be shut off by the transmitter by
pressing the remote start button
and remain in timer mode,
but if any other shut down zones or the ignition becomes active
the timer mode will cancel.
10
© 2003 Directed Electronics, Inc.
1.
Press Timer mode buttons.
2.
The vehicle will confirm with 4 parking light flashes.
3.
A 1-second delay will start.
4.
The system will start the car and will run for the speci-
fied duration, unless shut down by the remote start button
If shut down with the remote start button
.
the system
will remain in timer mode.
5.
The system will start every 3 hours until canceled by the
brake, hood, or neutral safety shut-down wires.
IMPORTANT! Timer Mode should be used only in open areas. Never start
and run the vehicle in an enclosed space such as a garage or carport.
To exit timer mode, turn the ignition switch on any time the
engine is running. The parking lights will flash 4 times, indicating
timer mode has been exited.
© 2003 Directed Electronics, Inc.
11
Valet® Take-Over
The Valet® Take-Over feature allows the vehicle to remain running
after the key has been removed from the ignition. This feature is
useful for occasions when you wish to exit and lock the vehicle for
short periods of time, but would like to leave the motor running
and the climate controls on.
To perform Valet Take-Over:
1.
Before turning off the engine, press and release
twice
within 2 seconds (or press and release the optional Momentary switch).
2.
Turn the ignition key to the OFF position.
(The engine will stay running.)
3.
The engine will run until the pre-programmed time elapses or
a shut-down input is received. (See the previous Remote Start
section for a complete list of shut-down inputs.)
NOTE: This feature will not work if the brake pedal is being pressed.
12
© 2003 Directed Electronics, Inc.
Programming Options
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require installation labor.
The following is a list of the programmable options, with the factory settings in Bold.
■
12, 24, or 60 minute run time. Your system can be programmed to allow the vehicle to run for 12, 24, or 60 minutes when remote started.
■
Parking lights flashing or constant. Your system can be programmed to turn on the parking lights for the entire remote
start operation.
Glossary of Terms
Control Unit: The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor
which monitors your vehicle and controls all the system functions.
Transmitter: A hand-held, remote control which operates the various functions of your system.
© 2003 Directed Electronics, Inc.
13
✂
QUICK REFERENCE GUIDE:
To lock the doors using your remote
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
■ Pressing
for one second will lock the doors. The parking lights will
flash once to confirm the doors are locked.
To unlock the doors using your remote
■ To unlock the doors, press
for one second. The parking lights will
flash twice to confirm the doors are unlocked.
To remote start the vehicle
✂
■ Press the
button twice within 3 seconds. The parking lights will
flash to confirm remote start operation. Once the remote start has been
activated, the vehicle will run for the preprogrammed period or until a
shutdown input is triggered.
The company behind this system is Directed Electronics, Inc.
Since its inception, Directed Electronics, Inc. has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, Directed Electronics, Inc.is ISO 9001 registered.
Quality Directed Electronics products are sold and serviced throughout North America
and around the world.
Call (800) 274-0200 for more information about our products and services.
Directed Electronics, Inc. is committed to delivering on time, the best products we
know how to provide, and to constantly work with our customers and vendors to
improve our products, quality, delivery and customer friendly features.
Directed Electronics, Inc.
Vista, CA 92081
www.directed.com
© 2003 Directed Electronics, Inc. - All rights reserved
G561V 06-03