Zanussi PS 64 User manual

EN
User manual
Ceramic glass induction hob
ZIT64BV
2
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2
3
5
6
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11
Subject to change without notice
Safety information
For your safety and correct operation of the appliance, read this manual carefully before installation
and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know
the operation and safety features of the appliance.
General safety
Warning! Persons (including children) with
reduced physical sensory, mental capabilities or
lack of experience and knowledge must not use the
appliance. They must have supervision or instruction for
the operation of the appliance by a person responsible for
their safety.
Child safety
• Only adults can use this appliance. Children must get
supervision to make sure that they do not play with the
appliance.
• Keep all packaging away from children. There is a risk
of suffocation.
• Keep children away from the appliance when it is on.
Warning! Start the child safety device to prevent
small children and pets from an accidental
activation of the appliance.
Safety during operation
• Remove all packaging, stickers and layers from the
appliance before the first use.
• Set the cooking zones to "off" after each use.
• Risk of burns! Do not put metallic objects, for example
cutlery or saucepan lids, on the cooking surface, as
they can become hot.
• Users with an implanted pacemaker must keep their
upper body minimum 30 cm from induction cooking
zones that are switched on.
2
Warning! Fire danger! Overheated fats and oils can
catch fire very quickly.
Correct operation
•
•
•
•
Always monitor the appliance during operation.
Only use the appliance for domestic cooking tasks!
Do not use the appliance as a work or a storage surface.
Do not put or keep very flammable liquids and materials, or fusible objects (made of plastic or aluminium)
on or near the appliance.
• Be careful when you connect the appliance to the near
sockets. Do not let electricity bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.
How to prevent a damage to the appliance
• If the objects or cookware fall on the glass ceramic, the
surface can be damaged.
• Cookware made of cast iron, cast aluminium or with
damaged bottoms can scratch the glass ceramic if you
move them on the surface.
• Do not let cookware boil dry to prevent the damage to
cookware and glass ceramics.
• Do not use the cooking zones with empty cookware or
without cookware.
• Do not cover the parts of the appliance with aluminium
foil.
• Do not cover the ventilation space of 5 mm between
the worktop and front of the unit below it.
Warning! If there is a crack on the surface,
disconnect power supply to prevent the electric
shock.
Installation instructions
Before the installation , note down this data from the
rating plate:
• Model description (Modell)................
• Product number (Prod. Nr.) ............. ....
• Serial number (Ser. Nr.) ...............
You find the rating plate of the appliance on its lower
casing.
ZIT64BV
58 GAD D5 AU
220-240 V 50-60-Hz
949 594 113 00
Induction 7,4 kW
7,4 kW
ZANUSSI
Safety instructions
Warning! You must read these!
Make sure that the appliance is not damaged
because of transportation. Do not connect a damaged
appliance. If it is necessary, speak to the supplier.
Only an authorised service technician can install, connect
or repair this appliance. Use only original spare parts.
Only use built-in appliances after you assemble the
appliance into correct built-in units and work surfaces that
align to the standards.
Do not change the specifications or modify this product.
Risk of injury and damage to the appliance.
Fully obey the laws, ordinances, directives and standards
in force in the country where you use the appliance (safety
regulations, recycling regulations, electrical safety rules
etc.)!
Keep the minimum distances to other appliances and
units!
Install anti-shock protection, for example install the
drawers only with a protective floor directly below the
appliance!
Protect the cut surfaces of the worktop against moisture
with a correct sealant!
Seal the appliance to the work top with no space left with
a correct sealant!
Protect the bottom of the appliance from steam and
moisture, e.g. from a dishwasher or oven!
Do not install the appliance adjacent to doors and below
windows! If not, hot cookware can be hit off the hob when
you open doors or windows.
Warning! Risk of injury from electrical current.
Carefully obey the instructions for electrical
connections.
•
•
•
•
The electrical mains terminal is live.
Make electrical mains terminal free of voltage.
Install correctly to give anti-shock protection.
Loose and incorrect plug and socket connections can
make the terminal become too hot.
• A qualified electrician must install the clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single-phase or two-phase connection.
• Replace the damaged mains cable with a special cable
(type H05BB-F Tmax 90°C; or higher). Speak your local Service Force Centre.
The appliance must have the electrical installation which
lets you disconnect the appliance from the mains at all
poles with a contact opening width of minimum 3 mm.
You must have correct isolation devices: line protecting
cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
3
Assembly
min. 500 mm
min.
50 mm
min.
50 mm
min.
5 mm
R 5mm
600mm
=
490+1mm
560+1mm
=
min.
20 mm
4
min.
25 mm
min.
5 mm
min.
38 mm
min.
5 mm
Product description
Cooking surface layout
1
2
180
180
210
145
mm
1 Induction cooking zone 1800W
2 Induction cooking zone 1800W
3 Induction cooking zone 1400 W, with Power function
2500W
4 Control panel
5 Induction cooking zone 2300W, with the Power function 3700W
mm
3
mm
mm
5
4
Control panel layout
1
2
3
4
5
6
B
B
9
8
7
Use the sensor fields to operate the appliance. Displays, indicators and sounds tell which
functions operate.
sensor field
function
1
starts and stops the hob
2
locks/unlocks the control panel
3
a heat setting display
shows the heat setting
4
cooking zones' indicators of timer
shows for which zone you set the time
5
the timer display
shows the time in minutes
6
/
increase or decrease heat setting
7
/
increase or decrease the time
8
selects the cooking zone
5
sensor field
function
actives Power function
9
Heat setting displays
Display
Description
The cooking zone is off
Keep warm is active
The cooking zone operates
-
Automatic heat up function is active
The induction cooking zone does not sense the cookware
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/Child safety device is on
Power function is active
The automatic switch off is active
ceramic is slightly heated by the residual heat of the
cookware.
Residual heat indicator
Warning!
Risk of burns from residual heat!
The induction cooking zones make the heat necessary for
cooking directly in the bottom of the cookware. The glass
Operating instructions
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth,
etc.) for longer than 10 seconds. The sound operates
some time and the hob stops. Remove the object or
clean the control panel.
• you do not stop a cooking zone or change the heat
setting. After some time comes on and the hob
stops. See the table.
Use the induction cooking zones with suitable cookware.
On and Off
Touch
for 1 second to start or stop the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
.
Automatic Switch Off times
Heat setting
Stops after
6
,
-
6 hours
5 hours
4 hours
1.5 hours
The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. The display shows the heat setting.
Touch
and
cooking zone.
at the same time to switch off the
The automatic heat up
Automatic heat up function sets the highest heat setting
) for some time, and then decreases to the nec(not
essary level.
and than set necTo start function touch the symbol
essary heat setting. comes on when the cooking zone
operates on highest heat setting.
To stop the function change heat setting.
11
10
9
8
7
6
5
4
3
2
1
0
Switching the Power function on and off
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 10 minutes at most. After that the induction cooking
zone automatically switches back to the highest heat set,
comes on. To switch
ting. To switch on, touch
off, touch
or
.
Power management
The power management divides the power between two
cooking zones in a pair (see
the figure). The power function increases the power to
the maximum level for one
cooking zone in the pair and
automatically decreases in
the second cooking zone to
a lower power level. The display for the reduced zone
alternates.
Using the Timer
Use the timer to set how long the cooking zone operates
for one cooking session.
Set the timer after the selection of the cooking zone.
You can set the heat setting before or after you set the
timer.
1
2
3
4
5
6
7
8
9
• Selection of the cooking zone: touch
again and
again until the indicator of a necessary cooking zone
comes on.
• Starting or changing the timer: touch
or
of the
timer to set the time ( 00 - 99 minutes). When the
indicator of the cooking zone flashes slower, the time
counts down.
• Stopping the timer: select the cooking zone with
and touch
to switch off the timer. The remaining
time counts backwards to 00 . The indicator of the
cooking zone goes out.
• Checking the remaining time: select the cooking zone
. The indicator of the cooking zone flashes
with
faster. Display shows the remaining time.
When the time elapses, the sound operates and 00
flashes. The cooking zone switches off.
• Stopping the sound: touch
You can use the timer as a minute minder while cooking
. Touch
or
to
zones do not operate. Touch
select the time. When the time elapses, the sound operates
and 00 flashes
Locking / unlocking the control panel
You can lock the control panel, but not
. It prevents
an accidental change of the heat setting during a cooking
session.
7
Touch the symbol
. The symbol
comes on for 4
seconds.
The Timer still operates.
Touch the symbol to switch off this function. The heat
setting that you set before comes on.
When you switch off the appliance, you also switch off
this function.
Switching off the child safety device
• Start the hob with
.
comes on. Touch
the acoustic signal. comes on
• Switch off the appliance.
The child safety device
• Touch
until the acoustic signal. The symbol
comes on. Set the heat setting in less than 10 seconds. You can operate the hob. When you stop the hob
, the child safety device operates again.
with
This function prevents an accidental operation of the hob.
Starting the child safety device
• Start the hob with
. Do not set the heat settings .
until
Overriding the child safety device for one cooking session
• Start the hob with
. The symbol
comes on.
• Touch
until the acoustic signal. . The symbol
comes on. Switch off the appliance.
Helpful hints and tips
Cookware
• The bottom of the cookware must be as thick and
flat as possible.
• Cookware made of enamelled steel and with aluminium
or copper bottoms can cause discoloration on glass
ceramic surface.
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless
steel, a multi-layer bottom (marked as correct by a
manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic,
porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the
highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and
flat as possible.
Cookware dimensions : induction cooking zones adapt to
the dimension of the bottom of the cookware automatically
8
to some limit. But, the magnetic part of the bottom of the
cookware must have a minimum diameter of approximately 3/4 of the cooking zones.
Operating noises
If you can hear
• cracking noise: cookware is made of different materials
(Sandwich construction).
• whistling: you use one or more cooking zones with
high power levels and the cookware is made of different
materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.
Energy saving
• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start
it.
• Stop the cooking zones before the end of the cooking
time to use residual heat.
• The bottom of pans and cooking zones must have the
same dimension.
Examples of cooking applications
The data in the table is for guidance only.
Heat
setting
1
Use to:
Keep cooked foods warm
Time
as required
Hints
Cover
1-2
Hollandaise sauce, melt: butter, chocolate, ge- 5-25 min
latine
Mix occasionally
1-2
Solidify: fluffy omelettes, baked eggs
Cook with a lid on
2-3
Simmer rice and milkbased dishes, heating up 25-50
ready-cooked meals
min
Add at least twice as much liquid as rice,
stir milk dishes part way through
3-4
Steam vegetables, fish, meat
20-45
min
Add a few tablespoons of liquid
4-5
Steam potatoes
20-60
min
Use max. ¼ l water for 750 g of potatoes
4-5
Cook larger quantities of food, stews and soups 60-150
min
Up to 3 l liquid plus ingredients
6-7
Gentle fry: escalope, veal cordon bleu, cutlets, as rerissoles, sausages, liver, roux, eggs, pancakes, quired
doughnuts
Turn halfway through
7-8
Heavy fry, hash browns, loin steaks, steaks
Turn halfway through
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips
The Power function is suitable for heating large quantities
of water.
Information on acrylamides
10-40
min
5-15 min
starch), acrylamides can pose a health risk. Thus, we
recommend that you cook at the lowest temperatures and
do not brown food too much.
Important! According to the newest scientific knowledge,
if you brown food (specially the one which contains
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive cleaning
agents will damage the appliance.
For your safety, do not clean the appliance with steam
blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic have
no effect on how the appliance operates.
Removing the dirt:
1. – Remove immediately: melting plastic, plastic foil,
and food containing sugar. Use a special glass
ceramic scraper. Put the scraper on the glass ceramic surface at an acute angle and slide the blade
on the surface.
– Stop the appliance and let it cool down before you
clean: limescale rings, water rings, fat stains, shiny metallic discolorations. Use a special cleaner
for glass ceramic or stainless steel.
2. Clean the appliance with a damp cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
9
What to do if…
Problem
Possible cause and remedy
You cannot start the appliance or op- • You touched 2 or more sensor fields at the same time. Only touch one
erate it.
sensor field.
• There is water or fat stains on the control panel. Clean the control panel.
• The child safety device or key lock operates. See the chapter Operating
the appliance.
• Start the appliance again and set the heat setting in 10 seconds.
The cooking zone reduces the heat
setting to
You covered one or more sensor fields or there is water or fat stains on the
control panel. Uncover the sensor fields. Clean the control panel.
A sound operates when the appliance You covered one or more sensor fields. Uncover the sensor fields.
is off.
The residual heat indicator does not
come on.
The cooking zone is not hot because it operated only for a short time. If the
cooking zone is supposed to be hot, speak to the After Sales Service.
Heat setting alternates
The Power management is active. See the section Power management.
A sound operates and appliance starts You covered
and stops again. After 5 seconds one
more sound operates.
comes on
• The automatic switch-off operates. Stop the appliance and start it again.
• Overheating protection for the cooking zone operates. Switch off the
cooking zone. Switch on the cooking zone again.
comes on
• No cookware on the cooking zone. Put cookware on the cooking zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for the cooking
zone. Move cookware to a smaller cooking zone.
and number come on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect again. If
comes on again, speak to the After Sales Service.
come on
There is an error in the appliance, because a cookware boils dry or you use
not correct cookware. Overheating protection for the cooking zone operates.
The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After approximately 30
should disappear, residual
seconds switch on the cooking zone again.
heat indicator can stay. Cool down the cookware and check it with the section
Cookware for the induction cooking zone.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the Customer Care Department. Give the data from the rating plate, three-digitletter code for the glass ceramic (it is in the corner of the
cooking surface) and an error message that comes on.
10
. Uncover the sensor field.
If you operated the appliance incorrectly, the servicing by
a customer service technician or dealer will not be free of
charge, even during the warranty period. The instructions
about the customer service and conditions of guarantee
are in the guarantee booklet.
Environment concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contact your local council, your household waste disposal
service or the shop where you purchased the product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard
the packaging materials as household waste at the waste
disposal facilities in your municipality.
11
www.zanussi.com
892935135-A-012010
www.zanussi.be