advertisement
Ultrasonic Cleaner SUR 46 A1
Ultrasonic Cleaner
Operation and Safety Notes
6
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
GB / IE Operation and Safety Notes Page 5
1 2 3 4 5 6
12
11 10 9
7
8
a
9
5
7
B
10 7
C
1.
11
2.
D
Table of Contents
Introduction
..................................................................Page 6
Intended Use ..........................................................................Page 8
Scope of Delivery ..................................................................Page 8
Description of Parts ................................................................Page 8
Technical Data .......................................................................Page 9
Safety Instructions
................................................Page 9
In order to avoid injury, please note the following .............Page 10
Please note the following in order to ensure correct operation .......................................................Page 10
In order to prevent a life-threatening electric shock, please note the following .............................Page 10
Please observe the following in order to avoid a fire ..............................................................Page 11
Example Applications
Objects to be cleaned ...........................................................Page 12
Default Time Intervals ............................................................Page 13
Before Initial Use
....................................................Page 14
Operation
Cleaning without the Insert ...................................................Page 15
Cleaning with Inserts .............................................................Page 17
Using a Cleaning Concentrate .............................................Page 19
Cleaning Methods
.................................................Page 19
Cleaning and Care
................................................Page 20
Problems and Solutions
..................................Page 21
Disposal
............................................................................Page 22
Guarantee and Service
...................................Page 22
Conformity
....................................................................Page 23
GB/IE 5
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Keep children and other unauthorised personnel at a safe distance when using electrical tools.
Avoid damaging the insulation on the lead: Do not trap the lead in the cupboard doors, pull it over hot surfaces or sharp edges!
Warning! Please observe the warning and safety instructions!
Caution! Danger of electric shock! Hazardous electrical voltage – danger of death!
Do not use in the vicinity of filled bathtubs, washbasins or other vessels. Never immerse the device in water or other liquids.
Protection class II; double protective insulation
Dispose packaging and appliance in an environmentally-friendly way!
6 GB/IE
Introduction
Ultrasonic Cleaner
Q
Introduction
Dear Customer,
We would like to thank you for your purchase and hope that you enjoy using your new ultrasonic cleaning device.
The device creates ultrasound waves that are emitted into the liquid contained in the device. This allows dirt to be efficiently removed from many kinds of objects in a very gentle way.
These instructions are intended to help you familiarise yourself with your new ultrasonic cleaning device and make operation of the device easier.
Please read the instructions closely before using the device for the first time. It is essential to follow the safety instructions in order to prevent accidents, injuries and damage.
The following operating instructions are intended to help you become acquainted with this product and facilitate its handling. The article is equipped with safety devices. Nevertheless you should read the safety information carefully and only use the article as described in these instructions so that no accidental damage or injury can occur. Please store these instructions in case you would like to read them again at a later time. If you pass the article on to others, please ensure that you also give them these instructions.
GB/IE 7
Introduction
Q
Intended Use
The device is only authorised for private use and not for commercial purposes. It is only intended for use for the applications described in these instructions. If it is used for other purposes, the warranty no longer applies.
Q
Scope of Delivery
1 x Ultrasonic cleaning device
1 x Basket insert
1 x Curved insert for watches
1 x CD holder
1 x Operating instructions
Q
Description of Parts
1
2
3
4
5
6
7
On-switch for timer (ON)
Display (with seconds indicator)
Off-switch for timer (OFF)
Timer button (SET)
Cover with viewing window
Blue indicator lamp
Stainless steel tank
8
9
10
11
Housing
Basket insert
Curved insert for watches
CD holder
12 Mains plug
8 GB/IE
Introduction / Safety Instructions
Q
Technical Data
L&P Art. No.:
Time intervals:
9611720 g
g
300 g
480 g
Mains voltage: 220–240 V ~ / 50 Hz
Power consumption: 50 watts g
600
sec
Ultrasonic frequency: 46 kHz
Stainless steel tank 7 : at max. marking approx. 600 ml
Protection class:
Model No.:
(without insert)
II /
SUR 46 A1
Safety Instructions
J This device is not intended for use by individuals (including children) with restricted physical, sensory or mental capacities or those
with a lack of experience and / or knowledge, unless they are supervised by an individual who is responsible for their safety or have received instructions from
such an individual on how to use the device. Children should be supervised in order to ensure that they do not play with the device.
J Please store the ultrasonic cleaning device where it is not accessible to children as they are not always able to correctly assess any possible hazards.
m DANGER TO CHILDREN! DANGER OF DEATH THROUGH
SUFFOCATION! Keep the packaging material away from children.
GB/IE 9
Safety Instructions
Q
In order to avoid injury, please note the following
J During operation, ensure that you do not come into contact with the liquid: ultrasound can be harmful to the skin and bones!
Q
Please note the following in order to ensure correct operation
J Operate the device only in accordance with the information contained on the type plate in order to ensure that the device functions correctly.
J Do not expose the ultrasonic cleaning device to temperatures lower than –10 °C or above +40 °C.
J Do not place the device on surfaces which may become hot, e.g. a hotplate or next to a gas cooker.
J Clean the device thoroughly after every use (see the section on
“Cleaning and Care“).
Q
In order to prevent a life-threatening electric shock, please note the following
J Remove the mains plug after use or before cleaning the device.
c WARNING! DANGER OF ELECTRIC SHOCK! Do not use while bathing. Never immerse the device or the lead in water or another liquid.
J Never operate the device unsupervised and only in accordance with the instructions on the type plate.
J Always remove the mains plug from the socket
- if a malfunction occurs,
10 GB/IE
Safety Instructions
- before you clean the device,
- if you are not going to use the device for a prolonged period,
- after every use.
J You should pull on the mains plug directly and not on the lead.
J If you find there is damage to the lead, mains plug, housing or other parts of the device, the device must not be used.
J Repairs should only be carried out by a specialist dealer.
J If the device’s mains lead is damaged, the lead must be replaced by the manufacturer, his customer services centre or a suitably qualified person, in order to avoid causing further danger.
c WARNING! DANGER OF ELECTRIC SHOCK! If the device has fallen into water, it is essential to remove the mains plug from the socket first before you put your hands into the water.
c WARNING! DANGER OF ELECTRIC SHOCK! Never touch the mains plug with wet hands, particularly when you insert it into or remove it from the socket.
J The installation of an earth leakage circuit breaker device with a rated tripping current of not more than 30 mA offers further protec-
J tion against an electric shock. The installation should only be carried out by a specialist electrician.
Please ensure that the lead does not become caught in cupboard doors or pulled across hot surfaces. Otherwise the insulation of the lead may be damaged.
Q
Please observe the following in order to avoid a fire
J Remove the mains plug after use or before cleaning the device.
J Never operate the device unsupervised and only in accordance with the information on the type plate.
J Remove the mains plug from the socket
GB/IE 11
Safety Instructions / Example Applications
- if a malfunction occurs,
- before you clean the device,
- if you are not going to use the device for a prolonged period,
- after every use.
Please pull on the mains plug itself and not on the lead.
J If you should find any damage to the lead, mains plug, housing or other parts, the device must not be used.
J Check the device regularly for any mechanical defects.
Q
Example Applications
Q
Objects to be cleaned
Jewellery:
Gold, silver, metal jewellery such as necklaces, rings, earrings, bracelets, watch chains, etc.
Metal Parts:
Coins, medals, badges, valves, small parts, waterproof watch components, etc.
Stationery:
Nibs of fountain pens, ballpoint pen casings, printer nozzles, signature stamps, etc.
Optical Objects:
Spectacles*, sunglasses*, magnifying glasses*, etc.
Note: Dry spectacle lenses after cleaning with a soft cloth. Streaks occur if the lenses are allowed to dry in the air.
Shiny surfaces should be polished afterwards.
Hygiene Articles:
Toothbrushes, dentures, braces and shaving heads of razors, razor blades, etc.
12 GB/IE
Example Applications
m * Warning:
– All optical lenses (glass or plastic) may be cleaned in the ultrasonic bath for a maximum of 90 seconds.
– Under no circumstances may polycarbonate lenses (plastic) be cleaned in the ultrasonic bath.
The following are unsuitable for ultrasonic cleaning:
Wood, genuine pearls, leather goods, clock and watch mechanisms, materials with sensitive or scratched / damaged surfaces.
Q
Default Time Intervals
At the factory there are five time intervals that have been preset for this device.
See Fig. D
180 seconds (3 minutes):
Standard time for a normal level of dirt. The time interval setting appears automatically on the display 2 when the device is plugged in.
300 seconds (5 minutes):
Recommended for the first cleaning of objects that have not been cleaned for a long time.
480 seconds (8 minutes):
Recommended for the first cleaning when several objects are cleaned together.
090 seconds:
This is the shortest time interval. Recommended for very light levels of dirt or if a short period of recleaning is required. Once the water is
GB/IE 13
Example Applications / Before Initial Use
noticeably dirty, it must be changed. If you wish to remove any residual dirt from the cleaned surface, clean the object again for 90 seconds in fresh liquid.
600 seconds:
This is the longest time interval. Recommended to increase the effectiveness of the cleaning.
Note: If the selected cleaning period is too long, it can lead to insecurely attached items, such as fittings, stick-on labels or decorations becoming detached from the object being cleaned. The same applies to other insecure items, e.g. the screws on spectacles, which may be come lose during the cleaning process.
Q
Before Initial Use
Unpacking and setting up the ultrasonic cleaning device: j Take the device carefully out of the box, remove the transport packaging and check the device for any possible damage that may have occurred during transport. Check also that all of the parts are present:
1 x basket insert 9
1 x curved insert 10
1 x CD holder 11 j If not all of the parts are present or your new device is damaged, please contact the service hotline (see guarantee notice).
j Place the ultrasonic cleaning device in such a way on a firm, flat surface that it cannot tip over. This surface should be easy to clean, brightly lit and readily accessible. Do not place the device on surfaces that may become hot, e.g. on hotplates or next to a gas cooker.
14 GB/IE
Before Initial Use / Operation
j Insert the mains plug 12 into a power socket. The number
(180 seconds) appears in the display 2 as standard.
180
3 Min m Important! Ensure that the mains voltage is 220 -240 V! (See the type plate on the underside of the device). The device might otherwise be damaged.
Q
Operation
Important! Fittings, stickers and decorations that are loosely attached to objects, as well as other loose parts, e.g. screws on / in spectacles, may become detached during the cleaning process.
You should therefore clean such items not more than once a month.
Note: The On-switch “ON” 1 and the Off-switch “OFF” 3 simply control the time interval of the timer or the cleaning process. The actual switching on and off of the device is controlled by the mains plug 12 .
Q
Cleaning without the Insert
j Ensure that the device is disconnected from the mains supply. j Open the lid 5 manually.
j Place the object to be cleaned into the stainless steel tank 7 .
j Then fill the stainless steel tank 7 with normal tap water.
j The liquid must cover the object that is to be cleaned, but must not exceed the mark indicating the maximum filling height.
j If the stainless steel tank 7 overflows, wipe off the outside of the device immediately until dry.
m Important! Never use the ultrasonic cleaning device without water as the device may be damaged!
GB/IE 15
Operation
1. Close the cover 5 and insert the mains plug 12 .
The figure 180
3 Min
(180 seconds) appears in the display 2 as standard – this is the standard time for a normal degree of soiling.
2. Select the desired time from five possible intervals:
( 180 g 300 g 480 g 090 g 600 ). Use the timer button 4 to set the desired time according to the degree of soiling.
3. Press the On-switch 1 and start the cleaning process.
The blue indicator light 6 on the lid 5 illuminates while the time in the display 2 counts down to 0.
Note: During the cleaning process a quiet vibration noise can be heard; this is caused by the cleaning process.
4. After the set time has elapsed the cleaning process is automatically stopped, the blue indicator lamp 6 goes off and the display 2 shows
000
. The originally selected time interval in minutes/symbol remains visible.
5. Press the Off-switch 3 to stop the cleaning process prematurely if necessary. The time remaining from the selected time interval is shown on the display 2 . Press the On-switch 1 again to resume the cleaning process 1 . Or select a new time interval using the timer button 4 and press the On-switch 1 again.
m Important! You can repeat the cleaning process in order to intensify the cleaning effect.
If the cleaning process is started several the liquid becomes very warm (approx. 41°C after the first cleaning process and approx.
60°C after the third in spite of a five-minute cooling down phase).
However, it is recommended that between the cleaning processes a pause of at least five minutes is inserted in order to allow the device to cool down. Do not change the time interval while a cleaning process is still running. Allow the time interval to expire normally, thus ensuring that the cleaning process is properly time-controlled.
6. If you wish to repeat the cleaning process, press the timer button 4 .
The next timing program appears on the display 2 .
16 GB/IE
Operation
7. Set the desired time interval from the five time interval settings available using the timer button 4 .
8. Press the On-switch 1 and start the cleaning process.
9. After the cleaning process has ended, remove the mains plug 12 from the socket, open the cover 5 and take the cleaned object out of the device.
Note: In order to avoid lime residues, always empty the stainless steel tank 7 and wipe dry with a fabric or microfibre cloth.
We recommend that the liquid should be renewed after every cleaning process if possible.
10. Please store the device in a cool and dry place.
Q
Cleaning with Inserts
Note: The basket insert 9 absorbs one third of the ultrasonic waves and therefore reduces the cleaning performance. It may therefore be necessary to carry out several cleaning processes.
Basket Insert 9 : j If you would like to clean sensitive and small objects, please use the basket insert 9 (see Illustration A). Place the item to be cleaned in the basket insert 9 . You can clean several items together in one cleaning procedure.
However you should ensure that the items do not touch one another in order to avoid damage (e.g. scratches).
j Place the filled basket insert 9 carefully in the device.
j Fill the device with water. The liquid must cover the item that is to be cleaned, but must not exceed the mark indicating the maximum filling height.
j Then start the cleaning process as described in paragraphs
1 to 10 of the section “Cleaning without an Insert“.
GB/IE 17
Operation
Curved Insert for Watches 10 :
Cleaning straps of waterproof watches: j Please use the curved insert 10 supplied for watchstraps made of metal.
j This curved insert 10 is tall enough to project above the MAX. marking to allow watch straps to be placed in the cleaner.
j Attach the watch so that the watch mechanism housing sits above the surface of the liquid (see Illustration B). This means that the watch mechanism housing does not have to be detached from the strap.
m Important! If the watch mechanism is in the liquid, it may be damaged during the cleaning process by the ultrasonic waves.
j Carefully place the curved insert 10 with the wristwatch in the device.
j Fill the device with water. The liquid must cover the object that is to be cleaned, but must not exceed the mark indicating the maximum filling height, or the watch housing must be outside the liquid.
j Then start the cleaning process as described in paragraphs
1 to 10 of the section “Cleaning without an Insert”.
CD holder for CD/DVDs 11 :
Cleaning CDs and DVDs (see Illustration C): j Insert a CD or DVD into the supplied CD holder 11 . j Fill the device with water. j 2 CDs or DVDs can be cleaned at the same time by using the ring as a spacer.
18 GB/IE
Operation / Cleaning Methods
Q
Using a Cleaning Concentrate
j It is possible to use a cleaning additive for problematic or stubborn dirt such as grease, resin, rust, wax, pigments, etc., which cannot be removed with water (see the section on “Cleaning Methods”).
j It is essential to read the warnings and manufacturer’s information before using the product.
j Please ask in specialist shops, such as those dealing in watches or jewellery, for advice.
Q
Cleaning Methods
General Cleaning: j Use normal tap water for general cleaning (the water should completely cover the item to be cleaned, although the maximum filling height should not be exceeded).
Basic Cleaning: j Cleaning concentrates can be used to intensify the cleaning effect of the device (e.g. commercially available washing-up liquid).
j Fill the stainless steel tank 7 with a cleaning mixture consisting of five parts of water and one part of washing-up liquid (e.g. 250 ml of water, 50 ml of washing-up liquid). j Please note the information provided by the manufacturer on the pack.
Partial Cleaning: m For the partial cleaning of large objects please use the device with the cover 5 open. During operation avoid contact with the liquid! Ultrasound is harmful to the skin and bones.
GB/IE 19
Cleaning and Care
Q
Cleaning and Care
j Please ensure that the device is switched off and remove the mains plug 12 from the socket.
c Danger of electric shock! During the cleaning and care process the device, lead and mains plug 12 must not be immersed in water or another liquid.
j The ultrasonic cleaning device must not be treated with acidic detergents or pointed objects.
j Clean the stainless steel tank 7 , housing 8 and inserts 9 , 10 and 11 with a cloth and wipe dry.
j In order to avoid lime residues, do not allow any residual water to remain in the container after use or cleaning.
j The device should be stored in a cool and dry place.
J The ultrasonic cleaning device must be kept out of the reach of children.
m Do not make any modifications to the device or the connection cable. All repairs should only be carried out by the service centre or an authorised specialist workshop.
20 GB/IE
Q
Problems and Solutions
Problems and Solutions
Problem /
Fault
The device is connected to the power supply but the display is blank 2
The object to be cleaned remains dirty.
Possible
Cause(s)
The mains plug
12 is not correctly inserted.
No power supply.
Solution
Insert the mains plug in the power socket.
12 firmly
The mains lead is broken.
The timer was not started.
There is no or too little water in the stainless steel tank 7 .
No detergent was added.
Too little detergent was added.
If necessary, have the 230 V socket to which the device is connected or the installation checked by a professional electrician.
Repairs should only be carried out by a specialist dealer.
Switch on the timer with the Onswitch 1 .
The stainless steel tank 7 can be filled up to the “MAX” mark with normal tap water or a cleaning mixture (see the sections “Operation” and “Cleaning Methods”).
Add cleaning concentrate according to the type of soiling (see the section on “Cleaning Methods”).
In the case of stubborn dirt, increase the cleaning mixture (see the section on “Cleaning Methods”) to 2 parts of water and
1 part of washing-up liquid
(e.g. 200 ml of water, 100 ml of washing-up liquid.
GB/IE 21
Problems ... / Disposal / Guarantee and Service
Problem /
Fault
Possible
Cause(s)
Clean with the basket insert 9
Solution
The basket insert 9 absorbs one third of the ultrasonic waves and therefore reduces the cleaning performance. It may therefore be necessary to carry out several cleaning procedures.
Q
Disposal
Do not dispose of the device in the normal domestic waste.
Please enquire at your local town or municipal authority about the possibility of disposing of the device in an environmentally-friendly manner (“electronic scrap“).
The packaging consists of environmentally-friendly materials which you can dispose of at your local recycling points.
Q
Guarantee and Service
Please see the enclosed guarantee document for the service hotline responsible for your country.
Our device has been manufactured with the greatest of care.
Should a malfunction occur we do of course provide a guarantee within the framework of our guarantee conditions for the flawless quality and functioning of the product.
22 GB/IE
Guarantee and Service / Conformity
The guarantee period is 36 months, beginning on the date of purchase.
Please retain your sales receipt as proof of the date of purchase. This guarantee does not affect the statutory warranty obligation.
The following are excluded from the guarantee:
- damage to fragile parts.
- damage caused by unauthorised tampering with the device.
- damage caused by the use of non-original spare parts.
- damage caused by improper handling.
- damage caused by acts of God.
- damage caused by non-compliance with the care instructions.
Furthermore, we cannot accept any liability for the consequences of incorrect use of the device.
Q
Conformity /
The CE symbol has been attached in compliance with the following
European Directives:
2006 / 95 / EC Low Voltage Directive
2004 / 108 / EC EMC Directive
The Declaration of Conformity has been deposited with the distributor:
LUTTER & PARTNER GmbH
Schleissheimer Straße 93a
D-85748 Garching bei München
GB/IE 23
Note:
During the course of product improvements we reserve the right to carry out technical and visual modifications to the ultrasonic
cleaning device and the accessories.
24 GB/IE
IAN 54386
Lutter & Partner GmbH
Schleissheimer Strasse 93 a
D-85748 Garching bei München
L&P Art.-Nr. 9611720
© by OrFGen Marketing
Last Information Update: 07 / 2010
Ident.-No.: SUR 46 A1072010-3
6
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement