Ricoh Aficio LD124c Operating instructions

Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=152 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.080000 mm
Operating Instructions
Copy Reference
Placing Originals
Copying
Color Adjustment/Program
Troubleshooting
User Tools (Copier / Document Server Features)
Specifications
Type for C2410/DSc424/LD124c/Aficio 3224C
Type for C3210e/DSc432/LD132c/Aficio 3232C
Printed in China
EN USA B156-7509A
B1567509A
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety
Information in the "General Settings Guide" before using the machine.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=152 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.080000 mm
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
a means POWER ON.
b means POWER OFF.
c means STAND BY.
For safe and correct use of this machine, please be sure to read the Safety Information in the General
Settings Guide before you use it.
Important
Trademark
Acrobat® is a registered trademark of Adobe Systems Incorporated.
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Notes
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see P.3 “Machine Types”.)
•
Type 1: C2410/DSc424/LD124c/Aficio 3224C
•
Type 2: C3210e/DSc432/LD132c/Aficio 3232C
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, the supplier recommends that you use genuine toner from the supplier.
The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from the supplier with your office products.
Power Source
120V, 60Hz, 12A or more
Please be sure to connect the power cord to a power source as shown above. For details about power
source, see “Power Connection” in the General Settings Guide.
Copyright © 2005
ThemisC1_EN_Copy_F_FM.book Page i Monday, December 27, 2004 4:10 PM
Manuals for This Machine
The following manuals describe the operational procedures of this machine. For
particular functions, see the relevant parts of the manual.
Note
❒ Manuals provided are specific to machine type.
❒ Adobe Acrobat Reader/Adobe Reader is necessary to view the manuals as a
PDF file.
❒ Two CD-ROMs are provided:
• CD-ROM 1 “Operating Instructions”
• CD-ROM 2 “Scanner Driver and Document Management Utility”
❖ General Settings Guide
Provides an overview of the machine and describes System Settings (such as
Tray Paper Settings), Document Server functions, and troubleshooting.
Refer to this manual for Address Book procedures such as registering fax
numbers, e-mail addresses, and user codes.
❖ Security Reference
This manual is for administrators of this machine. It describes security functions that the administrators can use to protect data from being tampered, or
prevent the machine from unauthorized use.
Also refer to this manual for the procedures for registering administrators, as
well as setting user and administrator authentication.
❖ Network Guide (PDF file - CD-ROM1)
Provides information about configuring and operating the printer in a network environment or using software.
This manual covers all models, and therefore contains functions and settings
that may not be available for your model. Images, illustrations, functions, and
supported operating systems may differ from those of your model.
❖ Copy Reference (this manual)
Describes operations, functions, and troubleshooting for the machine's copier
function.
❖ Facsimile Reference <Basic Features>
Describes operations, functions, and troubleshooting for the machine's facsimile function.
❖ Facsimile Reference <Advanced Features>
Describes advanced facsimile functions such as line settings and procedures
for registering IDs.
❖ Printer Reference
Describes system settings, operations, functions, and troubleshooting for the
machine's printer function.
i
ThemisC1_EN_Copy_F_FM.book Page ii Monday, December 27, 2004 4:10 PM
❖ Scanner Reference (PDF file - CD-ROM1)
Describes operations, functions, and troubleshooting for the machine's scanner function.
❖ Manuals for DeskTopBinder Lite
DeskTopBinder Lite is a utility included on the CD-ROM labeled “Scanner
Driver and Document Management Utility”.
• DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2)
Describes installation of, and the operating environment for DeskTopBinder Lite in detail. This guide can be displayed from the [Setup] display
when DeskTopBinder Lite is installed.
• DeskTopBinder Introduction Guide (PDF file - CD-ROM2)
Describes operations of DeskTopBinder Lite and provides an overview of
its functions. This guide is added to the [Start] menu when DeskTopBinder
Lite is installed.
• Auto Document Link Guide (PDF file - CD-ROM2)
Describes operations and functions of Auto Document Link installed with
DeskTopBinder Lite. This guide is added to the [Start] menu when DeskTopBinder Lite is installed.
❖ Other manuals
• PS3 Supplement (PDF file - CD-ROM1)
• Unix Supplement (Available from an authorized dealer, or as a PDF file on
our Web site.)
ii
ThemisC1_EN_Copy_F_FM.book Page iii Monday, December 27, 2004 4:10 PM
What You Can Do with This Machine
<Color Functions/Color Adjustments>
GCMO022e
iii
ThemisC1_EN_Copy_F_FM.book Page iv Monday, December 27, 2004 4:10 PM
AFT010S
iv
ThemisC1_EN_Copy_F_FM.book Page v Monday, December 27, 2004 4:10 PM
GCMO023e
v
ThemisC1_EN_Copy_F_FM.book Page vi Monday, December 27, 2004 4:10 PM
What You Can Do with This Machine
Functions differ depending on machine type and options. See p.4 “Functions Requiring Optional Configurations”.
Front
Front
vi
Back
Front
Front
Back
Back
Back
ThemisC1_EN_Copy_F_FM.book Page vii Monday, December 27, 2004 4:10 PM
1
2
3
2
3
3
1
4
4
1
1
2
3
3
3
2
4
1
1
4
3
1
3
1
1
2
5
2
7
8
7
1
4
8
1 3
5
3
6
1
2
5
7
7
8
2
8
1
5
3 1
4
6
3
5
1 3
5
3 1
vii
ThemisC1_EN_Copy_F_FM.book Page viii Monday, December 27, 2004 4:10 PM
viii
ThemisC1_EN_Copy_F_FM.book Page ix Monday, December 27, 2004 4:10 PM
TABLE OF CONTENTS
Manuals for This Machine ...................................................................................... i
What You Can Do with This Machine <Color Functions/Color Adjustments>.... iii
What You Can Do with This Machine.................................................................. vi
Notice ......................................................................................................................1
How to Read This Manual .....................................................................................2
Machine Types .......................................................................................................3
Functions Requiring Optional Configurations....................................................4
Control Panel..........................................................................................................5
Display Panel .............................................................................................................7
1. Placing Originals
Originals .................................................................................................................9
Sizes and Weights of Recommended Originals......................................................... 9
Sizes Detectable by Auto Paper Select ................................................................... 10
Missing Image Area ................................................................................................. 12
Placing Originals.................................................................................................. 13
Original Orientation .................................................................................................. 13
Placing Originals on the Exposure Glass................................................................. 14
Placing Originals in the ADF .................................................................................... 15
2. Copying
Basic Procedure................................................................................................... 19
Auto Start ................................................................................................................. 20
Interrupt Copy .......................................................................................................... 20
Left Original Beeper ................................................................................................. 20
Job Preset ................................................................................................................ 21
Copying from the Bypass Tray........................................................................... 22
When copying onto OHP Transparencies or Thick Paper ....................................... 24
When Copying on the Back Side of the Paper......................................................... 25
When copying onto envelopes ................................................................................. 26
Making A3, 11" × 17" Full Bleed Copies ............................................................ 27
Color Functions ................................................................................................... 28
Selecting a Color Mode............................................................................................ 28
Convert Colors ......................................................................................................... 29
Erase Color .............................................................................................................. 30
Color Background .................................................................................................... 31
Copier Functions ................................................................................................. 32
Adjusting Copy Image Density ................................................................................. 32
Selecting the Original Type ...................................................................................... 33
Selecting Copy Paper .............................................................................................. 34
Preset Reduce/Enlarge ............................................................................................ 37
Zoom ........................................................................................................................ 38
Auto Reduce / Enlarge ............................................................................................. 38
Size Magnification .................................................................................................... 39
Directional Magnification (%) ................................................................................... 40
Directional Size Magnification (inch) ........................................................................ 41
Sort........................................................................................................................... 42
ix
ThemisC1_EN_Copy_F_FM.book Page x Monday, December 27, 2004 4:10 PM
Stack ........................................................................................................................ 44
Staple ....................................................................................................................... 46
Duplex ...................................................................................................................... 49
1 Sided Combine...................................................................................................... 51
2 Sided Combine...................................................................................................... 52
Series Copies........................................................................................................... 54
Copying Book Originals............................................................................................ 55
Image Repeat........................................................................................................... 58
Double Copies.......................................................................................................... 59
Centring.................................................................................................................... 60
Positive / Negative ................................................................................................... 61
Mirror........................................................................................................................ 61
Erase........................................................................................................................ 62
Margin Adjustment ................................................................................................... 64
Background Numbering ........................................................................................... 65
Preset Stamp ........................................................................................................... 66
User Stamp .............................................................................................................. 67
Date Stamp .............................................................................................................. 70
Page Numbering ...................................................................................................... 72
Covers...................................................................................................................... 75
Designate ................................................................................................................. 76
Chapter .................................................................................................................... 77
Slip Sheets ............................................................................................................... 78
Storing Data in the Document Server ................................................................ 79
Programs .............................................................................................................. 81
Storing a Program .................................................................................................... 81
Changing a stored program ..................................................................................... 82
Deleting a Program .................................................................................................. 82
Recalling a Program................................................................................................. 82
3. Color Adjustment/Program
Color Adjustment................................................................................................. 83
Color Balance....................................................................................................... 84
Color Balance Program............................................................................................ 84
Image Adjustment................................................................................................ 86
User Color............................................................................................................. 88
Adjusting Colors Based on the Selected Color ........................................................ 88
Mixing Colors Manually with the Number Keys ........................................................ 89
Deleting User Colors ................................................................................................ 90
Sampling the User Colors ........................................................................................ 90
4. Troubleshooting
If Your Machine Does Not Operate As You Want.............................................. 91
When a Message Is Displayed................................................................................. 91
If You Cannot Make Clear Copies....................................................................... 93
If You Cannot Make Copies As You Want ......................................................... 95
When Memory Is Full ............................................................................................... 98
x
ThemisC1_EN_Copy_F_FM.book Page xi Monday, December 27, 2004 4:10 PM
5. User Tools (Copier / Document Server Features)
User Tools Menu (Copier / Document Server Features) .................................. 99
Accessing User Tools (Copier / Document Server Features)........................ 107
Changing Default Settings .....................................................................................107
Exiting User Tools ..................................................................................................107
Settings You Can Change with User Tools ..................................................... 108
General Features P.1/5 ...........................................................................................108
General Features P.2/5 ...........................................................................................109
General Features P.3/5 ...........................................................................................110
General Features P.4/5 ...........................................................................................110
General Features P.5/5 ...........................................................................................110
Reproduction Ratio P.1/2 ........................................................................................111
Reproduction Ratio P.2/2 ........................................................................................111
Edit P.1/3 ................................................................................................................112
Edit P.2/3 ................................................................................................................113
Edit P.3/3 ................................................................................................................114
Stamp .....................................................................................................................116
Input/Output ...........................................................................................................119
Adjust Color Image.................................................................................................120
Administrator Tools ................................................................................................121
6. Specifications
Combination Chart............................................................................................. 123
Supplementary Specifications.......................................................................... 124
INDEX....................................................................................................... 133
xi
ThemisC1_EN_Copy_F_FM.book Page xii Monday, December 27, 2004 4:10 PM
xii
ThemisC1_EN_Copy_F_FM.book Page 1 Monday, December 27, 2004 4:10 PM
Notice
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no
responsibility for its completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal
advisor.
The color samples in this manual may differ slightly from the colors of actual
copies.
Colors on color keys or the color circle may differ slightly from the colors of actual copies.
This machine is equipped with a function that prevents making counterfeit bank
bills. Due to this function the original images similar to bank bills may not be
copied properly.
1
ThemisC1_EN_Copy_F_FM.book Page 2 Monday, December 27, 2004 4:10 PM
How to Read This Manual
Symbols
This manual uses the following symbols:
R WARNING:
This symbol indicates a potentially hazardous situation that might result in
death or serious injury if you misuse the machine by not following the instructions under this symbol. Be sure to read the instructions, all of which are included in the Safety Information section in the General Settings Guide.
R CAUTION:
This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property damage that does not involve personal injury
when you misuse the machine without following the instructions under this
symbol. Be sure to read the instructions, all of which are included in the Safety
Information section in the General Settings Guide.
• WARNINGS and CAUTIONS are notes for your safety.
Important
If these instructions are not followed, paper might misfeed, originals might be
damaged, or data might be lost. Be sure to read these instructions.
Preparation
This symbol indicates prior knowledge or preparations are required before operation.
Note
This symbol indicates precautions for operation, or actions to be taken following
user error.
Limitation
This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.
Reference
This symbol indicates where further relevant information can be found.
[
]
Keys that appear on the machine's display panel.
{
}
Keys built into the machine's control panel.
2
ThemisC1_EN_Copy_F_FM.book Page 3 Monday, December 27, 2004 4:10 PM
Machine Types
This machine comes in two models which vary by copy speed. To confirm which
model you have, see the inside front cover of this manual.
Type 1
Type 2
Copy speed/B&W
24 copies/minute
(A4K, 81/2" × 11"K)
32 copies/minute
(A4K, 81/2" × 11"K)
Copy speed/Full Color
10 copies/minute
(A4K, 81/2" × 11"K)
10 copies/minute
(A4K, 81/2" × 11"K)
3
ThemisC1_EN_Copy_F_FM.book Page 4 Monday, December 27, 2004 4:10 PM
Functions Requiring Optional
Configurations
Certain functions require special machine configuration and extra options. See
the table below.
❍Required options
Options
Functions
4
Shift Sort
Shift Stack
Staple
500-Sheet Finisher
❍
❍
❍
1000-Sheet Finisher
❍
❍
❍
Shift Sort Tray
❍
❍
ThemisC1_EN_Copy_F_FM.book Page 5 Monday, December 27, 2004 4:10 PM
Control Panel
This illustration shows the control panel of a machine with options
fully installed.
AFZ031S
1. Screen Contrast knob
5. Color Circle
Adjusts display panel brightness.
Refer to this when adjusting colors. See
p.83 “Color Adjustment”.
2. {User Tools/Counter}} key
• User Tools
Press to change the defaults and conditions to meet your requirements.
See p.99 “User Tools (Copier / Document Server Features)”.
• Counter
Press to check or print the counter value.
See “Counter”, General Settings Guide.
6. Display panel
Displays operation status, error messages, and function menus.
See “Display Panel”, General Settings
Guide.
7. {Check Modes}} key
Press to check the entered copy job settings.
3. Indicators
8. {Program}} key
Display the status of the machine or indicate errors.
• d: Add Staple indicator
• D: Add Toner indicator
• B: Load Paper indicator
• L: Service Call indicator
• M: Open Cover indicator
• x: Misfeed indicator
See “Control Panel”, General Settings
Guide.
Press to register frequently used settings,
or recall registered settings. See p.81
“Programs”.
4. {Adjust/Program Color}} key
11. {Interrupt}} key
Use this key to adjust and register colors.
See p.83 “Color Adjustment/Program”,
p.88 “User Color”.
9. {Clear Modes}} key
Press to clear the previous copy job settings.
10. {Energy Saver}} key
Press to switch into and out of Energy
Saver mode. See “Saving Energy”, General Settings Guide.
Press interrupt a long copy job to make
copies during copying or scanning. See
p.20 “Interrupt Copy”.
Note
❒ When image quality is adjusted, the
lamp in the {Adjust/Program Color}
} key
is lit.
5
ThemisC1_EN_Copy_F_FM.book Page 6 Monday, December 27, 2004 4:10 PM
12. Main power indicator and On
indicator
The main power indicator turns on when
you turn on the main power. The On indicator lights when the power is on.
Important
❒ Do not turn off the main power
switch while the On indicator is lit
or blinking. Doing so may damage
the hard disk.
13. Operation switch
Press to turn the power on (the On indicator turns on). To turn the power off,
press again (the On indicator turns off).
See “Turning On the Power”, General Settings Guide.
14. {Sample Copy}} key
Press to make a single set of copies or
prints to check print quality before making multiple sets. See p.43 “Sample
copy”.
15. {Start}} key
Press to start copying. Press to start scanning or printing documents stored using
the Document Server function.
16. {Clear/Stop}} key
• Clear
Press to delete a number entered.
• Stop
Press to stop a job in progress.
17. {#}} key
Press to enter a numerical value.
18. Number keys
Press to enter the number of copies and
data for a selected function.
19. Color Selection Key (Copy
mode)
Switch keys depending on the type of
original, or the copying purpose:
{Auto Color Selection}
}:
{Full Color}
}:
{Black & White}
}:
{Single Color}
}:
{Two-color}
}:
See p.28 “Color Functions”
6
20. Function keys
Press to select one of the following functions:
• Copy
• Document Server
• Facsimile
• Printer
• Scanner
21. Function status indicators
Display the status of the above functions:
• Green: active
• Red: interrupted
ThemisC1_EN_Copy_F_FM.book Page 7 Monday, December 27, 2004 4:10 PM
Display Panel
The function items displayed serve as selector keys. You can select or specify an
item by lightly pressing them.
When you select or specify an item on the display panel, it is highlighted like
this:
. Keys appearing as
cannot be used.
Note
❒ The following illustration is an example of the panel display when the 1000Sheet finisher.
❖ Initial copy display
AFT035S
1. Original function, Image Density
and Special Original function.
2. Operational status and messages.
3. You can register up to three frequently used reduce/enlarge ratios
other than the fixed reduce/enlarge
ratios. See p.111 “Shortcut R / E”.
4. Numbers of originals scanned
into memory, copies set, and copies
made.
5. Sort, Stack, Staple functions.
6. Displays contents of the Shortcut
keys. You can register frequently
used functions in these keys. See
p.110 “Copy Function Key: F1-F5”.
7. Displays available functions.
Press a function name to display its
menu. For example, press [Reduce /
Enlarge] to bring up the Reduce/Enlarge menu.
8. A clip mark indicates the currently selected function.
7
ThemisC1_EN_Copy_F_FM.book Page 8 Monday, December 27, 2004 4:10 PM
8
ThemisC1_EN_Copy_F_FM.book Page 9 Monday, December 27, 2004 4:10 PM
1. Placing Originals
Originals
Note
❒ Highlighter pen colors are difficult to reproduce. Depending on the color
used, they may not come out on copies, or may come out as a different color.
Sizes and Weights of Recommended Originals
❖ Metric version
Where original is placed Original size
Original weight
Exposure glass
Up to A3
--
ADF
One-sided originals:
40–128 g/m2
A3L – A5KL
Two-sided originals:
52–105 g/m2
A3L – A5KL
❖ Inch version
Where original is placed Original size
Exposure glass
ADF
Original weight
Up to 11" × 17"
--
One-sided originals:
11–34 lb.
11" × 17"L – 51/2" × 81/2"KL
Two-sided originals:
14–28 lb.
11" × 17"L – 51/2" × 81/2"KL
Note
❒ The maximum number of originals that can be placed in the ADF is about 50.
❒ The weight range for originals when using the Mixed Size function is 52–81
g/m2, 13.8–21.5 lb.
Originals not recommended for the ADF
Placing the following types of originals in the ADF can cause paper misfeeds or
result in damage to the originals. Place these originals on the exposure glass instead.
• Originals other than those specified on p.9 “Sizes and Weights of Recommended Originals”.
• Stapled or clipped originals
• Perforated or torn originals
9
ThemisC1_EN_Copy_F_FM.book Page 10 Monday, December 27, 2004 4:10 PM
Placing Originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin originals that have low stiffness
• Thick originals such as postcards
• Originals of inappropriate weight
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
1
Note
❒ The original might become dirty if it is written on with a pencil or a similar
instrument.
Sizes Detectable by Auto Paper Select
❍ : Detectable size × : Undetectable size
❖ Metric version
Size A3L
B4
JISL
A4K
L
B5
JISK
L
Location of the
original
A5K
L
11" ×
17"L
81/2"
×
14"L
8 1/ 2"
×
11"K
L
51/2"
×
81/2"
KL
81/2"
×
13"L
Exposure glass
❍
❍
❍
❍
×
×
×
×
×
❍
ADF
❍
❍
❍
❍
❍
×
×
×
×
❍
JIS:Japanese Industrial Standard
❖ Inch version
Size A3L
B4
JISL
A4K
L
B5
JISK
L
A5K
L
11" ×
17"L
81/2"
×
14"L
81/ 2 "
×
11"K
L
51/2"
×
8 1/ 2"
KL
10" ×
14"L
Location of the
original
10
Exposure glass
×
×
×
×
×
❍
❍
❍
×
×
ADF
×
×
×
×
×
❍
❍
❍
❍
❍
ThemisC1_EN_Copy_F_FM.book Page 11 Monday, December 27, 2004 4:10 PM
Originals
❖ Exposure glass
1
CP01AEE
❖ ADF
Note
❒ When copying custom size originals, make sure you specify the size of the
originals. If not, the image may not be copied properly. See p.17 “Placing custom size originals”.
Sizes difficult to detect
It is difficult for the machine to automatically detect the sizes of the following
types of originals, so select the paper size manually.
• Originals with indexes, tags, or other protrusions
• Transparent originals such as OHP transparencies or translucent paper
• Text or picture dense original
• Originals containing solid images
• Originals containing solid images around their edges
11
ThemisC1_EN_Copy_F_FM.book Page 12 Monday, December 27, 2004 4:10 PM
Placing Originals
Missing Image Area
Even if you correctly place originals in the ADF or on the exposure glass, margins of a few millimeters on all four sides of the original might not be copied.
1
1. 0 - 4.0 mm, 0"- 0.16"
2. 0 - 4.0 mm, 0"- 0.16"
12
3. 0 - 4.0 mm, 0"- 0.16"
4. 2.0 - 6.0 mm, 0.08"- 0.24"
ThemisC1_EN_Copy_F_FM.book Page 13 Monday, December 27, 2004 4:10 PM
Placing Originals
Placing Originals
Note
❒ Place originals only when all correction fluid and ink has completely dried. Not taking this precaution
could dirty the exposure glass, thus
resulting in blemished copies.
For example, to copy A3Kor 11" ×
17"K originals with the Staple
function selected:
1
Reference
For original sizes you can set, see
p.9 “Originals”.
Original Orientation
This function is useful for copying
torn originals or large originals.
You can set the original orientation in
the following ways.
❖ Standard orientation
Select this function when original
orientation is the same as copy paper orientation.
❖ 90°° turn
Use this to copy A3K, B4 JISKor
11" × 17"K size originals. The machine rotates the copy image by
90°. This is useful for copying large
originals using the Staple, Duplex,
Combine, or Stamp functions.
AAE043S
Note
❒ It is recommended that you use the
Original Orientation function with
the Auto Paper Select or Preset Reduce/Enlarge function.
A Press [Special Original].
13
ThemisC1_EN_Copy_F_FM.book Page 14 Monday, December 27, 2004 4:10 PM
Placing Originals
B Select the original orientation.
1
Standard orientation
Placing Originals on the
Exposure Glass
A Make sure
A Lift the ADF.
is selected.
Important
❒ Do not lift the ADF forcefully.
O t h e r w is e , t h e A D F c o v e r
might open or be damaged.
90° turn
A Place the original in the landscape orientation, and then
press
.
Note
❒ Be sure to lift the ADF more
than 30°. Otherwise, the size of
the original might not be detected correctly.
❒ Be sure not to press the ADF too
hard; otherwise, the left scale
and the Exposure Glass may be
bent and cause a malfunction.
B Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
C Press [OK].
1. Reference mark
2. Left Scale
Note
❒ Start with the first page to be
copied.
C Lower the ADF.
14
ThemisC1_EN_Copy_F_FM.book Page 15 Monday, December 27, 2004 4:10 PM
Placing Originals
Placing Originals in the ADF
A Set the document guide to the orig-
Settings should be made accordingly
in the following situations:
B Place
inal size.
the aligned originals face
up into the ADF.
1
❖ When placing originals consisting of
more than 50 pages:
p.15 “Batch”
❖ When placing originals one by one:
p.16 “SADF”
❖ When placing originals of the same
width but different sizes:
p.16 “Placing originals of mixed
sizes”
ZGHS060E
❖ When placing custom size originals:
p.17 “Placing custom size originals”
Note
❒ Do not stack originals above the
limit mark on the side guide of the
ADF.
❒ The last page should be on the bottom.
❒ Do not place objects on the sensors
or cover them with your hands, or
the original size may not be detected properly. Also, do not place anything on the ADF as this could
cause a malfunction.
1. Limit mark
2. Document guide
Note
❒ Straighten any curls in the originals before placing them in the
ADF.
❒ To prevent multiple sheets from
being fed at once, fan the originals before placing them in the
ADF.
❒ Place the originals squarely.
Batch
The Batch mode enables you to copy
originals of more than 50 pages as a
single document, even if you place
the originals into the ADF in instalments.
Important
❒ Place special originals, such as translucent paper, one by one.
1. Sensors
15
ThemisC1_EN_Copy_F_FM.book Page 16 Monday, December 27, 2004 4:10 PM
Placing Originals
A Press [Special Original].
A Press [Special Original].
B Press [Batch], and then press [OK].
B Press [SADF], and then press [OK].
C Place one page of an original, and
1
Note
❒ If [SADF] is displayed, change
the settings. See p.119 “Switch
to Batch (SADF)”.
C Place the
first instalment of the
originals, and then press the
{Start}
} key.
D After the originals has been fed,
place the next instalments.
E When the Sort, Combine, or Du-
plex function is set, press the {#}
}
key after all originals have been
scanned.
F Press the {Start}} key.
D When the machine instructs you
to place another original, place
the next page.
The second and subsequent pages
will feed in automatically without
a need to press the {Start}
} key.
Note
❒ When the Sort, Combine or Duplex function is set, press the
{#}
} key after all originals have
been scanned.
SADF
Placing originals of mixed sizes
In SADF mode, even when an original is placed one page at a time into
the ADF, each page is automatically
fed as it is placed.
When placing different size originals
of the same width in the ADF together, the machine automatically checks
the sizes of the originals and makes
copies.
Preparation
To use the SADF function, set the
User Tools (Copier / Document
Server Features) such that [SADF] is
displayed when you press [Special
Original]. See p.119 “SADF Auto
Reset”.
Reference
For related default settings, see
p.111 “Shortcut R / E”.
16
then press the {Start}
} key.
The Auto Feed indicator is shown
on the display.
Note
❒ When placing same width originals of different sizes in the ADF
and making copies without using
the Mixed size function, parts of
the original image might not be
copied, or the paper might jam.
❒ Copy speed and scanning speed
may slow down.
ThemisC1_EN_Copy_F_FM.book Page 17 Monday, December 27, 2004 4:10 PM
Placing Originals
❒ Sizes of originals that can be placed
together using this function are as
follows:
Metric
version
A3L•A4K, A4L•A5K
Inch
version
11" × 17"L•81/2" × 11"K,
81/2" × 14"L•81/2" × 11"K,
81/2" × 11"L•51/2" × 81/2K,
81/2" × 14"L•51/2" × 81/2"K
Placing custom size originals
When placing custom size originals,
specify the size of the originals.
A Press [Special Original].
A Press [Special Original].
B Press [Mixed Sizes], and then press
B Press [Custm Size Origi.].
C Enter the horizontal size
[OK].
C Align the rear and left edges of
the originals as shown.
1
Note
❒ Paper with a vertical size of 105–
297 mm (4.2"–11.6") and a horizontal size of 128–432 mm (5.1"–17")
can be placed with this function.
of the
original using the number keys,
and then press [#].
Note
❒ If you make a mistake, press
[Clear] or the {Clear/Stop}
} key,
and then enter the value again.
D Enter the vertical size of the origiAFT043S
1. Place the originals into the ADF
2. Vertical size
D Adjust the guide to the size of the
nal using the number keys, and
then press [#].
E Press [OK].
F Place the originals, and then press
the {Start}
} key.
widest original.
E Place
the aligned originals face
up in the ADF.
F Press the {Start}} key.
17
ThemisC1_EN_Copy_F_FM.book Page 18 Monday, December 27, 2004 4:10 PM
Placing Originals
1
18
ThemisC1_EN_Copy_F_FM.book Page 19 Monday, December 27, 2004 4:10 PM
2. Copying
Basic Procedure
Preparation
When User Code Authentication is
set, the screen for entering a user
code will be displayed. Enter your
user code using the number keys,
and then press the { #}
} key. For
user codes, see "Authentication Information", General Settings Guide.
When Basic Authentication, Windows Authentication, or LDAP
Authentication is set, the authentication screen will be displayed.
Enter your login user name and
user password, and then press
[Login]. See "When the Authentication Screen is Displayed", General
Settings Guide.
A Make sure "d
Ready" is shown
on the display.
If any other function is displayed,
press the {Copy}
} key.
❖ Initial copy display
C Place the originals.
Reference
p.13 “Placing Originals”
D Make the necessary settings.
E Enter the required number of copies using the number keys.
Note
❒ The maximum copy quantity that
can be set is 100.
F Press the {Start}} key.
Copying starts.
Note
❒ When placing originals on the
exposure glass, press the { #}
}
key after all the originals are
scanned.
❒ Copies are delivered face down.
Important
❒ When Basic Authentication,
Windows Authentication, or
LDAP Authentication is set, always log off when you have finished using the machine to
prevent unauthorized users
from using the machine.
B Make
sure no previous settings
remain.
Note
❒ When there are previous settings remaining, press the {Clear
Modes}
} key before entering your
settings.
-How to operate
❖ To stop the machine during a multicopy run
Press the {Clear/Stop}
} key.
❖ To return the machine to the initial
condition after copying
Press the {Clear Modes}
} key.
19
ThemisC1_EN_Copy_F_FM.book Page 20 Monday, December 27, 2004 4:10 PM
Copying
❖ When clearing entered values
Press the {Clear/Stop}
} key or [Clear]
on the display.
❖ To check the settings
Press the {Check Modes}
} key.
2
Auto Start
Copy starts automatically when the
machine is ready for copy.
A Set
the copy contents while
“Please wait.” is displayed.
B Set the original.
C Press the {Start}} key. The {Start}}
key lamp will flash.
Interrupt Copy
Use this function to interrupt a long
copy job to make urgently needed
copies.
Limitation
❒ You cannot use Interrupt Copy
whe n fax o rig inals are being
scanned.
A Press the {Interrupt}} key.
The Interrupt indicator lights.
When scanning is interrupted
20
A Remove the originals that were
being copied, and then place
the originals you want to copy.
B Press the {Start}
} key.
Copying starts.
C When copying is complete, remove the originals and copies.
D Press the {Interrupt}
} key again.
The Interrupt indicator turns
off.
E When the display prompts you
to do so, place the former set of
originals again.
F Press the {Start}
} key.
Note
❒ The previous copy job's settings are restored and the
machine continues copying
from where it left off.
When the machine continues
copying
A Place the originals you want to
copy.
B Press the {Start}
} key.
The machine stops the previous
job and starts copying the new
originals.
C When copying is complete, remove originals and copies.
D Press the {Interrupt}
} key again.
The Interrupt indicator goes
out.
The previous copy job's settings
are restored and the machine
continues copying from where
it left off.
Left Original Beeper
The beeper sounds and an error message is displayed if you leave originals on the exposure glass after
copying.
Note
❒ See p.109 “Tone: Original remains”.
ThemisC1_EN_Copy_F_FM.book Page 21 Monday, December 27, 2004 4:10 PM
Basic Procedure
Job Preset
You can make settings for the next
copy job while copying is in progress.
If a long copy job is in progress and
you do not want to wait for it to finish, you can use this function to make
settings for the next copy job in advance. When the current copy job finishes, the next job begins
automatically.
2
A Press [NextJob] when "Copying..."
is displayed.
B Make settings for the next copy
job.
C Place
the originals in the ADF,
and then press the {Start}
} key.
All originals are scanned.
D Press [To “Printing”].
Returns to the initial copy display.
After the current copy job, the next
job starts automatically.
Note
❒ You can switch the display to
the current copy job by pressing
[To “Printing”]. You can switch
the display to the preset job by
pressing [To “Reserving”].
21
ThemisC1_EN_Copy_F_FM.book Page 22 Monday, December 27, 2004 4:10 PM
Copying
Copying from the Bypass Tray
Use the bypass tray to copy onto special paper such as OHP transparencies, thick paper, thin paper, and copy
paper that cannot be loaded in the paper trays.
2
Preparation
The default setting is [1 Sided→
→2
Sided].
Important
❒ When copying from the bypass
tray, select [1 Sided] for copying in
[Dup./Combine/Series] (for example
[1 Sided] → [1 Sided].) You can
change the initial settings. ⇒ p.109
“Duplex Mode Priority”
❒ It is not possible to use inkjet paper.For details about paper sizes
and paper types, see ⇒ General
Settings Guide, “Paper Type”.
❒ Paper of 433 mm in length, or larger, is likely to jam, crease, or not
feed in properly.
Note
❒ If you use custom size copy paper
or special paper, you should input
its vertical and horizontal dimensions directly. See p.17 “Placing
custom size originals”. The sizes
you can input are as follows:
Metric
version
Inch
version
22
• Vertical: 90.0 – 305.0 mm
• Horizontal: 148.0 – 457.2 mm
• Vertical: 3.55" – 12.00"
• Horizontal: 5.83" – 18.00"
❒ The machine can automatically detect the following sizes as standard
size copy paper:
Metric
version
A3L, A4L, 8" × 13"L, A5L
Inch
version
11" × 17"L, 81/2" × 11"L,
51/2" × 81/2"L
❒ When copying onto OHP transparencies or paper heavier than 128
g/m2 (about 34 lb.), you need to
specify the paper type. See p.24
“When copying onto OHP Transparencies or Thick Paper”.
❒ The maximum number of sheets
you can load at one time depends
on paper type. The maximum
number of sheets should not exceed the upper limit.
❒ Some kinds of envelopes might
cause misfeed and wrinkle. If this
happens, push down the fusing
unit's green lever. See p.26 “When
copying onto envelopes”. Also, be
sure to place the front face of the
envelope downward.
❒ You must specify the paper size
when using paper (tracing paper,
etc.) of less than 59g/m2 thickness.
❒ Select the paper size when making
horizontal copies.
A Open the bypass tray.
ThemisC1_EN_Copy_F_FM.book Page 23 Monday, December 27, 2004 4:10 PM
Copying from the Bypass Tray
B Insert the paper with the side you
want to copy facing down until
you hear the beep, and align the
paper guide to the paper size.
C Select the paper type and size.
Note
❒ When copying onto OHP transparencies or thick paper, see
p.24 “When copying onto OHP
Transparencies or Thick Paper”.
❒ When copying on the back side
of paper, see p.25 “When Copying on the Back Side of the Paper”.
2
When copying onto standard size
paper
ZGHS005e
1: Extender
A Press the {#}
} key.
B Press [Select Size].
Important
❒ If the guides are not flush against
the copy paper, image skewing
or misfeeds might occur.
Note
❒ Do not stack paper over the limit mark, if you do image skewing or misfeeds might occur.
❒ When you load the OHP transparencies, check the front and
back of the sheets, and place
them correctly, or a misfeed
might occur. Set the paper direction to K and select A4K,
8 1/ 2" × 11"K as paper size in
step C.
❒ Swing out the extender to support paper sizes larger than
A4L, 81/2" × 11"L.
❒ Fan paper to get air between the
sheets and avoid multi-sheet
feeds.
❒ When copying onto envelopes:
⇒ p.26 “When copying onto envelopes”.
C Select the paper size.
D Press [OK] twice.
When copying onto custom size
paper
A Press the {#}
} key.
B Press [Custom Size].
C Enter the vertical size of the paper using the number keys,
and then press [#].
23
ThemisC1_EN_Copy_F_FM.book Page 24 Monday, December 27, 2004 4:10 PM
Copying
D Enter the horizontal size of the
paper using the number keys,
and then press [#].
Note
❒ If [Horiz.mm] is not highlighted, press [Horiz.mm].
❒ To register the custom size
entered, press [Program], and
then press [Exit].
2
When copying onto OHP
Transparencies or Thick Paper
To make copies onto OHP transparencies or thick paper, you need to
specify the paper type and size. See
p.23 “When copying onto standard
size paper”, p.23 “When copying onto
custom size paper”.
Important
❒ Use only recommended OHP transparencies.
E Press [OK].
When copying onto special paper
A Open
the bypass tray, and then
adjust the guides to the paper
size.
A Press the {#}
} key.
B Select paper type in "Special
paper".
C Press [OK].
B Gently insert the OHP transpar-
D Place the originals, and then press
Important
❒ When copying onto OHP transparencies, make sure that the
cut positions are set properly.
❒ To avoid paper misfeeds, fan
the paper before loading it in
the tray.
the {Start}
} key.
Note
❒ When the Sort function is set,
press the {#}
} key after all originals have been scanned.
E When your copy job is finished,
press the { Clear Modes}
} key to
clear the settings.
24
Note
❒ The print speed when copying
onto OHP transparencies or thick
paper is slower than when copying
onto plain paper.
encies or thick paper face down
until the beeper sounds.
C Press the {#}} key.
D Select [OHP Sheet] or [Thick Paper].
E Select the paper size.
ThemisC1_EN_Copy_F_FM.book Page 25 Monday, December 27, 2004 4:10 PM
Copying from the Bypass Tray
F Press [OK] twice.
G Place the originals, and then press
the {Start}
} key.
Important
❒ When copying onto OHP transparencies, remove copied sheets
one by one.
-Original and paper orientations
Pay attention to the orientation of paper and originals.
❖ Top to top
2
H When your copy job is finished,
press the { Clear Modes}
} key to
clear the settings.
When Copying on the Back
Side of the Paper
Using the bypass tray, you can make
copies on the back of paper which has
already been copied on the other side.
Note
❒ Do not use paper that has already
been copied onto by other equipment.
❒ Copies made on the back side of
the paper should be originals with
very little image area, such as text
originals.
❒ If the paper is curled, straighten it
out, and then insert it. If the paper
is not straightened out, it can cause
paper jams.
GGH03E
❖ Top to bottom
25
ThemisC1_EN_Copy_F_FM.book Page 26 Monday, December 27, 2004 4:10 PM
Copying
A Open the bypass tray,
and then
adjust the guides to the paper
size.
B Gently
❒ When inserting envelopes, be sure
to unfold the flaps and position
them opposite to the paper feed direction.
insert the copied paper
with the side you want to copy
face down until the beeper
sounds.
2
C Press the {#}} key.
D Select the paper size.
E Select [Plain: Dup.Back]
or [Thick:
Dup.Back].
ZGHS006E
Reference
For more information about supported size of envelope, see “Recommended Paper Sizes and
Types”, General Settings Guide.
A Open
F Press [OK] twice.
G Place the originals, and then press
the {Start}
} key.
When copying onto envelopes
Note
❒ When placing an original on the
exposure glass, place the original
with the bottom line aligned to the
left scale.
❒ When placing originals in the ADF,
place the originals with the bottom
line inserted in the ADF.
26
the bypass tray, and then
insert the envelopes with the side
you want to copy face down until
the beeper sounds.
B Align the paper guide to the envelope side.
C Press the {#}} key.
D Select the paper size, and then select [Thick Paper] for the paper
type.
E Press [OK].
F Place the originals, and then press
the {Start}
} key.
G When your copy job is finished,
press the { Clear Modes}
} key to
clear the settings.
ThemisC1_EN_Copy_F_FM.book Page 27 Monday, December 27, 2004 4:10 PM
Making A3, 11" × 17" Full Bleed Copies
Making A3, 11" × 17" Full Bleed Copies
You can make A3, 11" × 17" full bleed copies with 12" × 18" paper. This is useful
for making A3, 11" × 17" size copies with a colored background (e.g. catalogues).
2
1. A3, 11" × 17" size Original
2. In standard copy mode, margins
3. 12" × 18" Full Bleed Copy
4. Cut around the margins to pro-
appear on copies
duce a full image
Note
❒ You can use this function with 12" × 18" paper.
❒ When A3, 11" × 17" full bleed copying is made, the original image is copied
onto the center.
❒ You can only use this function with the bypass tray.
27
ThemisC1_EN_Copy_F_FM.book Page 28 Monday, December 27, 2004 4:10 PM
Copying
Color Functions
Selecting a Color Mode
Select a Color mode that best suits
your originals and copying requirements.
2
Reference
For color images, see p.iii “What
You Can Do with This Machine
<Color Functions/Color Adjustments>”
The following basic functions are explained in this section.
❖ Auto Color Selection
Judges the color of the original automatically, and copies either in
full color or black/white.
Note
❒ When using Auto Color Selection, the machine decides
whether to copy in full color or
black and white by examining
the central part of the original.
Because of this detection method, small full-color originals
such as business cards may be
detected as black and white.
When copying small full-color
originals, we recommend you
select the Full Color Copy.
Note
❒ Yellow, magenta, and cyan will
be copied with one toner color,
but beige, orange, red, light
green, pink, green, marine blue,
blue and purple uses 2 toner
colors to copy.
❖ Two Color Copy
• Two Color Copy (Normal)
Copies black and other parts in
two specified colors.
Note
❒ You can select from basic
colors and registered colors.
• Two Color Copy (Red & Black)
Copies the red part in red, and
all the other parts in black or
white.
Note
❒ When the width of the color
is set to “Wider”, colors close
to orange and purple will be
recognized as red. This adjustment will be valid in
“Erase Color” and “Convert
Colors”. See p.120 “Color
Sensitivity”
A Select the type of color key.
❖ Full Color Copy
Copies by overlaying yellow, magenta, cyan, and black.
❖ Black/White Copy
Copies in black regardless of the
color of the original.
❖ Single Color Copy
Copies in one designated color.
AFZ033S
28
ThemisC1_EN_Copy_F_FM.book Page 29 Monday, December 27, 2004 4:10 PM
Color Functions
When the {Single Color}
} key is
selected
A Select designation method of color
( [Basic Color], [User Color] ).
When [Two-color] is pressed
A Press [Change Color Setting].
B Press [Black Portion], and then
select the color to be replaced
by black.
2
Note
❒ When selecting a color from
the user colors, press [User
Color].
C Press [Non-black Portion], and
then select the color to replace
the black color of the original.
B Select
the color, and then press
[OK].
Note
❒ When copied using the registered color, the original will be
copied lighter than the registered color.
❒ Press [i
iLighter] or [Darkerj
j],
and you can adjust the density
in 4 steps.
When the {Two-color}
} key is
selected
A Select either [Two-color] or [Red &
Black].
When [Red & Black] is pressed
A Press [OK].
D Press [OK] twice.
Convert Colors
Copies by changing the color in the
original to a different color.
Note
❒ It is possible to specify up to 4
colors.
❒ The width of the color to be converted can be adjusted in 5 levels.
If the color width is set to “Wider”
and red has been specified, colors
which are close to magenta or orange, will also be converted. The
color width can be adjusted in the
“User Tools”. See p.120 “Color
Sensitivity”
A Press the {Full Color}} key.
29
ThemisC1_EN_Copy_F_FM.book Page 30 Monday, December 27, 2004 4:10 PM
Copying
B Press [Edit / Color Creation].
H After selecting all the colors to be
converted, press [OK].
I Press [OK] 3 times.
J Place the originals, and then press
the {Start}
} key.
2
Erase Color
C Press [Color Creation].
D Press [Convert Color].
E Select any one item from [Conversion 1] to [Conversion 4].
F Select the color to be converted.
G Select the new color to be convert-
You can erase a certain color in the
image of the original.
Note
❒ It is possible to select up to 4 colors.
❒ The width of the color to be deleted can be adjusted in 5 levels. If the
color width is set to “Wider” and
red has been specified, colors
which are close to magenta or orange, will also be deleted. The
color width can be adjusted in the
“User Tools”. See p.120 “Color
Sensitivity”
A Press [Edit / Color Creation].
ed.
Note
❒ You can adjust the density of
each color in 4 levels.
❒ When you want to change the
converted color, press from
[Conversion 1] to [Conversion 4]
and make the selection again.
❒ When changing between more
than two colors, repeat steps E
to G.
Selecting from [User Color]
A Press [User Color].
B Select from the registered colors,
then press [OK].
30
B Press [Color Creation].
C Press [Erase Color].
D Select the color to be erased.
Note
❒ You can cancel the selection by
pressing the selected (highlighted) key.
❒ You can erase 4 colors at once.
ThemisC1_EN_Copy_F_FM.book Page 31 Monday, December 27, 2004 4:10 PM
Color Functions
E Press [OK] after selecting all the
colors to be deleted.
F Press [OK] twice.
G Place the originals, and then press
E Press [OK] twice.
F Place the originals, and then press
the {Start}
} key.
the {Start}
} key.
2
Color Background
Copies by adding a color in the whole
page.
Note
❒ Since the Color Background function overprints the entire original,
the color of the image may change.
A Press [Edit / Color Creation].
B Press [Color Creation].
C Press [Color Background].
D Select the background color, then
press [OK].
Note
❒ You can adjust the density of
each color in 4 levels.
❒ You can cancel the selection by
pressing the selected (highlighted) key.
Selecting from the [User Color]
A Press [User Color].
B Select a registered color, and
then press [OK].
31
ThemisC1_EN_Copy_F_FM.book Page 32 Monday, December 27, 2004 4:10 PM
Copying
Copier Functions
Adjusting Copy Image Density
There are three types of adjustment
available:
2
❖ Auto Image Density
The machine automatically adjusts
image density.
Manual image density
A Press [Auto Image Density] to cancel
it.
B Press
[i
iLighter] or [Darkerj
j] to
adjust image density.
❖ Manual image density
You can adjust the general density
of the original in nine increments.
❖ Combined auto and manual image
density
Use when copying originals with
dirty backgrounds (such as newspapers). You can adjust foreground density while leaving the
background unchanged.
Combined auto and manual image
density
Auto image density
A Make sure [Auto Image Density] is
A Make sure [Auto Image Density] is
B Press
selected.
32
selected.
[i
iLighter] or [Darkerj
j] to
adjust image density.
ThemisC1_EN_Copy_F_FM.book Page 33 Monday, December 27, 2004 4:10 PM
Copier Functions
Selecting the Original Type
Select one of the following six types to
match originals:
❖ Text
When originals contain only text
(no pictures).
❖ Text / Photo
When originals contain photographs or pictures alongside the
text.
❖ Photo
When you need to reproduce delicate tones of photographs and pictures.
❖ Map
You can configure the machine to
scan Map originals. If “Original
Type Display” has been set to
“Display” (from Copier / Document Server Features on the User
Tools menu), select “Map” from
the “Others” menu. If “Original
Type Display” has been set to
“Hide”, select “Map” from the
“Original Type” menu.
2
Reference
p.108 “Original Type Display”
p.108 “Original Photo Type Priority”
A Press the appropriate key to select
the original type.
Note
❒ If you select “Text / Photo” or
“Photo” as the original type, select the photo type from among
the three options below:
• Glossy Photo
Use when copying developed photographs.
• Printed Photo
Use when copying photographs or pictures that are
printed on paper (e.g. magazines).
• Copied Photo
Use when copying copies or
originals generated by printers.
If the original type keys are not
displayed
A Press [Original Type].
B Select the original type, and
then press [OK].
❖ Generation Copy
When originals are copies (generation copies), the copy image can be
reproduced sharply and clearly.
❖ Pale
When you need to reproduce originals that have lighter lines in pencil, or faintly copied slips. Faint
lines are copied with greater clarity.
33
ThemisC1_EN_Copy_F_FM.book Page 34 Monday, December 27, 2004 4:10 PM
Copying
Selecting Copy Paper
There are two ways to select copy paper:
❖ Auto Paper Select
The machine selects a suitable size of copy paper automatically based on original size and reproduction ratio.
2
❖ Manual Paper Select
Choose the paper you want to copy onto from a paper tray, bypass tray, or
Large Capacity Tray (LCT).
Reference
p.11 “Sizes difficult to detect”
p.108 “Paper Display”
Note
❒ See the following table for copy paper sizes and orientations that can be used
with Auto Paper Select (when copying at a ratio of 100%).
❖ Metric version
Where original is placed
Paper size and orientation
Exposure glass
A3L, B4 JISL, A4KL, B5 JISKL, 81/2" × 13"L
ADF
A3L, B4 JISL, A4KL, B5 JISKL, A5KL,
81/2" × 13"L
❖ Inch version
Where original is placed
Paper size and orientation
Exposure glass
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
ADF
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL, 10" × 14"L,
51/2" × 81/2"KL
❒ Only the paper trays set to [No Display] or [Recycled Paper] in Paper Type and
also set to [Yes] in Apply Auto Paper Select can be selected for the Auto Paper
Select function. See “Paper Type: Tray 1–4” in “Tray Paper Settings”, General
Settings Guide.
❒ Auto Paper Select cannot be used if all the paper trays are set to other than [No
Display] or [Recycled Paper].
34
ThemisC1_EN_Copy_F_FM.book Page 35 Monday, December 27, 2004 4:10 PM
Copier Functions
Auto Paper Select
A Make sure [Auto Paper Select] is selected.
2
Note
❒ Trays with a key mark are not automatically selected. See “Paper Type” in
“Tray Paper Settings”, General Settings Guide.
Manual Paper Select
A Select the paper tray, bypass tray or LCT.
The selected paper tray is highlighted.
Reference
p.22 “Copying from the Bypass Tray”
If the paper type keys are not displayed
A Press [Auto Paper Select].
B Select the paper type.
35
ThemisC1_EN_Copy_F_FM.book Page 36 Monday, December 27, 2004 4:10 PM
Copying
- Rotated copy
If the orientation of the original (L or K) is different to that of the paper you are
copying onto, this function rotates the original image by 90°, fitting it onto the
copy paper. This function works when [Auto Paper Select] or [Auto Reduce / Enlarge] is selected. See p.34 “Auto Paper Select”, p.38 “Auto Reduce / Enlarge”.
2
GCROTA0E
Note
❒ The default setting for Auto Tray Switching is [With Image Rotation]. You cannot use the Rotated Copy function if this setting is changed to [Without Image
Rotation] or [Off]. See p.108 “Auto Tray Switching”.
❒ You cannot use the Rotated Copy function when enlarging onto A3, B4 JIS or
11" × 17", 81/2" × 14" size paper. To do this, place the original in the L orientation.
Original size and orientation
You cannot
rotate:
Copy paper size and orientation
When enlarging to →
A4, B5
JIS, or
A5
B4 JIS
or A3
K
GCROTA1E
GCROTA2E
However, you A4, B5
can use:
JIS, or
A5
When enlarging to →
B4 JIS
or A3
L
GCROTA3E
GCROTA4E
❒ When using the 1000-sheet finisher, you cannot use the Rotated Copy function when [Left 2] or [Top 2] is selected for stapling. See p.46 “Staple”.
❒ When using the 500-sheet finisher, you cannot use the Rotated Copy function.
36
ThemisC1_EN_Copy_F_FM.book Page 37 Monday, December 27, 2004 4:10 PM
Copier Functions
Preset Reduce/Enlarge
You can select a preset ratio for copying.
Note
❒ When making reduced copies from
A3 or B4 originals to A4 OHP transparencies, set the OHP transparencies in tray 1 in the K direction and
use the Auto Reduce/Enlarge
function. ⇒ p.38 “Auto Reduce /
Enlarge”
2
A Press [Reduce / Enlarge].
❖ Base Point
The base point of Reduce/Enlarge
differs depending on how the original was scanned. When the original is placed on the exposure glass,
the upper left corner is the base
point. When placed in the ADF, the
bottom left corner is the base point.
Note
❒ To select a preset ratio on the initial display, press the shortcut
reduce/enlarge key, and then
proceed to step D.
B Press [Enlarge] or [Reduce].
C Select a ratio, and then press [OK].
D Place originals, and then press the
{Start}
} key.
GCKA031e
1. Base point when placed on the exposure glass.
2. Base point when placed in the
ADF.
Reference
Related default settings:
p.111 “Shortcut R / E”
p.112 “R/E Priority”
-Create margin function
Use Create Margin to reduce the image to 93% of original size using the
center as reference. You can assign
this function to a shortcut key on the
initial display. By combining it with
the Reduce/Enlarge function, you
can also provide the Reduce/Enlarge
copy with a margin.
Reference
Related default settings:
p.110 “Copy Function Key: F1-F5”
p.112 “Ratio for Create Margin”
37
ThemisC1_EN_Copy_F_FM.book Page 38 Monday, December 27, 2004 4:10 PM
Copying
A
Press [Create Margin] on the initial
display.
B Enter the ratio.
To select the ratio using [n
n] and
[o
o]
A Select a preset ratio close to the
ratio using [Reduce] or [Enlarge].
B Adjust the ratio further, using
[n
n] or [o
o].
2
B
If you do not want to combine it
with the Reduce/Enlarge function,
place originals, and then press the
{Start}
} key.
Zoom
You can change the reproduction ratio in increments of 1%.
Note
❒ Pressing [n
n] or [o
o] changes
the ratio in increments of 1%.
Pressing and holding down
[n
n] or [o
o] changes it in increments of 10%.
❒ If you have incorrectly entered the ratio, readjust it using [n
n] or [o
o].
To enter the ratio using the
number keys
A Press [Mag. Ratio].
B Enter the ratio using the number
keys.
C Press [#].
D Press [OK].
Note
❒ You can select a preset ratio close
to the ratio using [Reduce] or [Enlarge], and then adjust it further,
using [n
n] or [o
o].
A Press [Reduce / Enlarge].
38
C Place the originals, and then press
the {Start}
} key.
Auto Reduce / Enlarge
The machine can choose an appropriate reproduction ratio based on the
paper and original sizes you select.
ThemisC1_EN_Copy_F_FM.book Page 39 Monday, December 27, 2004 4:10 PM
Copier Functions
Note
❒ You cannot use the bypass tray
with this function.
❒ When using Auto Reduce / Enlarge, see the following table for
original sizes and orientations you
can use:
❖ Metric version
Where original is
placed
Original size and
orientation
Exposure glass
A3L, B4 JISL,
A4KL, B5 JISKL,
81/2" × 13"L
ADF
A3L, B4 JISL,
A4KL, B5 JISKL,
A5KL, 81/2" × 13"L
❖ Inch version
Where original is
placed
Original size and
orientation
Exposure glass
11" × 17"L,
81/2" × 14"L,
81/2" × 11KL
ADF
11" × 17"L,
81/2" × 14"L,
81/2" × 11"KL,
51/2" × 81/2"KL,
10" × 14"L
Reference
p.11 “Sizes difficult to detect”
A Press [Auto Reduce / Enlarge].
C Place the originals, and then press
the {Start}
} key.
Size Magnification
You can calculate an enlargement or
reduction ratio based on the lengths
of the original and copy.
2
Note
❒ Measure and specify the lengths of
the original and copy by comparing "A" with "a".
A Press [Reduce / Enlarge].
B Press [Specifd. Ratio].
C Make sure [Size Magnificatn] is highlighted.
D Enter
the length of the original
using the number keys, and then
press [#].
B Select the paper tray.
39
ThemisC1_EN_Copy_F_FM.book Page 40 Monday, December 27, 2004 4:10 PM
Copying
Note
❒ You can enter sizes within the
following ranges:
A Press [Reduce / Enlarge].
Metric 1–999 mm
version (increments of 1 mm)
Inch
0.1"–99.9"
version (increments of 0.1")
2
E Enter the length of the copy using
the number keys, and then press
[#].
Note
❒ To change the length after pressing [#], select [Original] or [Copy],
and then enter the length.
F Press [OK] twice.
G Place the originals, and then press
the {Start}
} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, horizontally and vertically.
B Press [Specifd. Ratio].
C Press [Direct. Mag.%].
To enter the ratio using the
number keys
A Press [Horizontal].
B Enter the ratio using the number
keys, and then press [#].
C Press [Vertical].
D Enter the ratio using the number
keys, and then press [#].
E Press [OK].
To specify a ratio using [n
n] and
[o
o]
A Press [With no].
B Press [Horizontal].
C Adjust the ratio using [n
n] or [o
o].
CP2P01EE
a: Horizontal ratio
b: Vertical ratio
Note
❒ You can also select a preset ratio
close to the ratio using [Reduce] or
[Enlarge], and then adjust it further,
using [n
n] or [o
o].
40
Note
❒ Pressing [n
n] or [o
o] changes
the ratio in increments of 1%.
Pressing and holding down
[n
n] or [o
o] changes it in increments of 10%.
❒ If you have incorrectly entered the ratio, readjust it using [n
n] or [o
o].
D Press [Vertical].
E Adjust the ratio using [n
n] or
[o
o].
F Press [OK].
ThemisC1_EN_Copy_F_FM.book Page 41 Monday, December 27, 2004 4:10 PM
Copier Functions
D Press [OK].
E Place the originals, and then press
A Press [Reduce / Enlarge].
the {Start}
} key.
Directional Size Magnification
(inch)
A suitable reproduction ratio is automatically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
2
B Press [Specifd. Ratio].
C Press [Dirc.Size Mag.in].
D Enter the horizontal size
of the
original using the number keys,
and then press [#].
E Enter
the horizontal size of the
copy using the number keys, and
then press [#].
F Enter the vertical size of the origiCP2M01EE
1. Horizontal original size
2. Vertical original size
3. Horizontal copy size
4. Vertical copy size
Preparation
Specify the vertical and horizontal
size of the original and that of the
copy, as shown.
Note
❒ You can enter sizes within the following ranges:
Metric
version
nal using the number keys, and
then press [#].
G Enter the vertical size of the copy
using the number keys, and then
press [#].
Note
❒ To change the length, press the
key you want to change, and
then enter the new value.
H Press [OK] twice.
I Place the originals, and then press
the {Start}
} key.
Vertical: 1–999 mm
(increments of 1 mm)
Horizontal: 1–999 mm
(increments of 1 mm)
Inch
version
0.1"–99.9" (increments of 0.1")
41
ThemisC1_EN_Copy_F_FM.book Page 42 Monday, December 27, 2004 4:10 PM
Copying
Sort
The machine can scan originals into
memory and automatically sort copies.
Reference
Related default settings:
2
p.120 “Select Stack Function”
p.120 “Memory Full Auto Scan Restart”
p.119 “Rotate Sort: Auto Paper
Continue”
p.108 “Auto Tray Switching”
❖ Sort
Copies are assembled as sequentially-ordered sets.
Note
❒ To confirm the paper sizes that
can be used in the Sort function
⇒ p.126 “Sort, Rotate Sort,
Stack”.
❖ Rotate Sort
Every other copy set is rotated by
90°KL and delivered to the copy
tray.
42
Note
❒ To use the Rotate Sort function,
two paper trays with paper of
the same size and type, but different orientation (KL), are required. See ”Paper Type: Tray14”, General Settings Guide.
❒ You cannot use the bypass tray
with this function.
❖ Shift Sort
• The optional 500-Sheet Finisher,
1000-Sheet Finisher or Shift Sort
Tray is required to use this function. Each time the copies of one
set or those of each job are delivered, the next copy is shifted
when delivered so that you can
differentiate each set or job. If
the shift sort tray is installed, it
provides this function by sliding from side to side.
A Press [Sort] or [Rotate Sort].
❖ When a finisher is not installed
ThemisC1_EN_Copy_F_FM.book Page 43 Monday, December 27, 2004 4:10 PM
Copier Functions
❖ When the 500-sheet finisher is
installed
❒ When placing originals on the
exposure glass or in the ADF using the Batch function, press the
{ #}
} key after all the originals
have been scanned.
D Press the {Start}} key.
2
Sample copy
❖ When the 1000-sheet finisher is
installed
You can use this function to check
copy settings before making a long
copy run.
Note
❒ This function can be used only
when the Sort function is turned
on.
A Select Sort and any other neces-
sary functions, and then place the
originals.
B Press the {Sample Copy}} key.
Note
❒ When the optional finisher is installed, use the User Tools to
display [Rotate Sort]. See p.120
“Select Stack Function”.
B Enter the number of copy sets using the number keys.
Limitation
❒ The maximum number of sets is
100.
Note
❒ To confirm the type of finishing,
press the {Sample Copy}
} key. See
p.43 “Sample copy”.
C Place the originals.
Note
❒ When placing originals on the
exposure glass, start with the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
AFZ035S
One copy set is delivered as a sample.
C If the sample is acceptable, press
[Print].
The specified number of copies is
made, minus one for the proof
copy.
43
ThemisC1_EN_Copy_F_FM.book Page 44 Monday, December 27, 2004 4:10 PM
Copying
Note
❒ If you press [Suspend] after checking the results, return to step A
to adjust the copy settings as
necessary. You can change the
settings for Staple, Duplex,
Copy Orientation, Stamp, Margin Adjust., and Cover / Slip
Sheet. However, depending on
the combination of functions,
you may not be able to change
certain settings.
2
Stack
Copies can be assembled with each
page shifted.
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is turned
on.
A While
"Copying" is displayed,
press the {Clear/Stop}
} key.
B Press [Change Quantity].
❖ Shift Stack
The optional 500-Sheet finisher,
1000-Sheet Finisher or Shift Sort
Tray is required to use this function.
This function groups copies of
each page in a multi-page original
together. Every other page stack is
shifted for ease of separation. If
shift sort tray is installed, it provides this function by sliding from
side to side.
333
C Enter the number of copy sets using the number keys, and then
press the {#}
} key.
Note
❒ The number of sets you can enter differs depending on when
the {Clear/Stop}
} key is pressed.
D Press [Continue].
Copying starts again.
44
Note
❒ You cannot use the bypass tray
with this function.
A Press [Stack].
ThemisC1_EN_Copy_F_FM.book Page 45 Monday, December 27, 2004 4:10 PM
Copier Functions
B Enter the number of copies using
the number keys.
C Place the originals, and then press
the {Start}
} key.
Note
❒ When placing originals on the
exposure glass, start with the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
❒ When placing originals on the
exposure glass or in the ADF using the Batch function, press the
{ #}
} key after all the originals
have been scanned.
2
45
ThemisC1_EN_Copy_F_FM.book Page 46 Monday, December 27, 2004 4:10 PM
Copying
Staple
An optional finisher and the bridge unit are required to use this function.
Individual copy sets can be stapled.
2
Note
❒ You cannot use the bypass tray with this function.
Stapling position and original setting
Place all the originals in an orientation in which they can be read. They will be
automatically rotated for copying. When copy paper is identical in size and orientation to the original, staple positions are as follows:
❖ 500-Sheet finisher
Original location
Exposure glass
Top
K
L
Note
❒ Original images are not rotated.
46
Document
Feeder
Stapling position
ThemisC1_EN_Copy_F_FM.book Page 47 Monday, December 27, 2004 4:10 PM
Copier Functions
❖ 1000-Sheet finisher
Original location
Exposure glass
Document
Feeder
Stapling
position
Top
K
2
L
Bottom
K
L
Left 2
K
*1
L
Top 2
K
*1
L
*1
Not available for paper size larger than A4.
47
ThemisC1_EN_Copy_F_FM.book Page 48 Monday, December 27, 2004 4:10 PM
Copying
A Select one of the stapling positions.
❖ 500-Sheet finisher
2
Note
❒ The stapling position will be fixed to “Top”.
❖ 1000-Sheet finisher
Note
❒ When you select the stapling position, the Sort function is automatically selected.
Reference
p.46 “Stapling position and original setting”
p.127 “Staple”
B Enter the number of copy sets using the number keys.
C Place the originals, and then press the {Start}} key.
Note
❒ When placing originals on the exposure glass, start with the first page to
be copied. When placing originals in the ADF, set the first page on top.
❒ When placing originals on the exposure glass or in the ADF using the
Batch function, press the {#}
} key after all the originals have been scanned.
48
ThemisC1_EN_Copy_F_FM.book Page 49 Monday, December 27, 2004 4:10 PM
Copier Functions
Duplex
There are three types of duplex copies:
❖ 1 Sided→
→2 Sided
Copies 2 one-sided pages onto a
two-sided page.
Original orientation and completed
copies
Copy images differ according to the
orientation in which you place originals (vertical K or horizontal L ).
2
❖ 2 Sided→
→2 Sided
Copies 1 two-sided page onto a
two-sided page.
GCRYOU1E
*1
❖ 2 Sided→
→1 Sided
Copies each side of a two-sided
original onto two separate pages.
This table shows the orientation of images on the front and back of copies,
not the orientation of delivered copies.
Note
❒ You cannot use the bypass tray
with this function.
❒ The maximum paper weight that
can be used with duplex copying is
64–105 g/m2, 17–28 lb.
Reference
p.64 “Margin Adjustment”
Related default settings:
p.112 “Front Margin: Left/Right”
p.112 “Back Margin: Left/Right”
p.113 “Front Margin: Top/Bottom”
p.113 “Back Margin: Top/Bottom”
49
ThemisC1_EN_Copy_F_FM.book Page 50 Monday, December 27, 2004 4:10 PM
Copying
A Press [Dup./Combine/Series].
❒ When placing originals on the
exposure glass or in the ADF using the Batch function, press the
{ #}
} key after all the originals
have been scanned.
Originals and copy orientation
2
You can select the orientation.
• Top to Top
Note
❒ You can also select "1 Sided to 2
Sided" or "2 Sided to 2 Sided" directly, by pressing the Copy
Function Key. If you do this,
proceed to step D.
B Select
Duplex1
• Top to Bottom
[1 Sided] or [2 Sided] for
Original, and then select [1 Sided]
or [2 Sided] for Copy.
Duplex2
Note
❒ You can change the default orientation with User Tools. See p.109
“Copy Orientation in Duplex
Mode” and p.109 “Original Orientation in Duplex Mode”.
Note
❒ To change the copy orientation,
press [Orientation]. See p.50
“Originals and copy orientation”.
A Press [Dup./Combine/Series].
B Press [Orientation], select the orientation (Original/Copy), and then
press [OK].
C Press [OK].
D Place the originals, and then press
the {Start}
} key.
Note
❒ When placing originals on the
exposure glass, start with the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
C Press [OK].
D Place originals, and then press the
{Start}
} key.
50
ThemisC1_EN_Copy_F_FM.book Page 51 Monday, December 27, 2004 4:10 PM
Copier Functions
• Open to top S originals
1 Sided Combine
Combine several pages onto one side
of a sheet.
❖ 1 Sided 2 Pages → Combine 1 Side
Copies 2 one-sided originals onto
one side of a sheet.
GCSHUY2E
2
❖ Placing originals (originals placed in
the ADF)
• Originals read from left to right
Combine5
GCSHVY7E
❖ 1 Sided 4 Pages → Combine 1 Side
Copies 4 one-sided originals onto
one side of a sheet.
• Originals read from top to bottom
❖ 1 Sided 8 Pages → Combine 1 Side
Copies 8 one-sided originals onto
one side of a sheet.
❖ 2 Sided 1 Page → Combine 1 Side
Copies 1 two-sided original onto
one side of a sheet.
❖ 2 Sided 2 Pages → Combine 1 Side
Copies 2 two-sided originals onto
one side of a sheet.
❖ 2 Sided 4 Pages → Combine 1 Side
Copies 4 two-sided originals onto
one side of a sheet.
❖ Orientation of the original and combine image position
• Open to leftR originals
Combine6
Note
❒ You cannot use the bypass tray
with this function.
Reference
Related default settings:
p.113 “Erase Original Shadow in
Combine”
p.114 “Copy Order in Combine”
p.115 “Separation Line in Combine”
GCSHUY1E
51
ThemisC1_EN_Copy_F_FM.book Page 52 Monday, December 27, 2004 4:10 PM
Copying
A Press [Dup./Combine/Series].
2 Sided Combine
Combines various pages of originals
onto a two-sided sheet.
❖ 1 Sided 4 Pages → Combine 2 Side
Copies 4 one-sided originals onto a
sheet, two pages per side.
2
Note
❒ You can select "1 Sided 2 Pages
→ Combine 1 Side" or "1 Sided 4
Pages → Combine 1 Side" by using Copy Function key. In this
case, proceed to step F.
B Press [1 Sided] or [2 Sided] for Original, and then press [Combine 1
Side] for Copy.
GCSHVY9E
❖ 1 Sided 8 Pages → Combine 2 Side
Copies 8 one-sided originals onto a
sheet, four pages per side.
Reference
p.50 “Originals and copy orientation”
C Select the number of originals to
combine, and then press [OK].
D Select the paper size.
E Press [OK].
F Place the originals, and then press
the {Start}
} key.
52
GCSHVYAE
1. Front
2. Back
ThemisC1_EN_Copy_F_FM.book Page 53 Monday, December 27, 2004 4:10 PM
Copier Functions
❖ 1 Sided 16 Pages → Combine 2 Side
Copies 16 one-sided originals onto
a sheet, eight pages per side.
❖ 2 Sided 16 Pages → Combine 2 Side
Copies 8 two-sided originals onto
a sheet, eight pages per side.
2
GCSHVY5E
1. Front
2. Back
GCSHVY6E
1. Front
2. Back
❖ 2 Sided 4 Pages → Combine 2 Side
Copies 2 two-sided originals onto
a sheet, two pages per side.
Note
❒ You cannot use the bypass tray
with this function.
Reference
Related default settings:
GCSHVY1E
❖ 2 Sided 8 Pages → Combine 2 Side
Copies 4 two-sided originals onto
a sheet, four pages per side.
p.51 “Orientation of the original
and combine image position”
p.113 “Erase Original Shadow
in Combine”
p.114 “Copy Order in Combine”
p.115 “Separation Line in Combine”
A Press [Dup./Combine/Series].
GCSHVY2E
1. Front
2. Back
53
ThemisC1_EN_Copy_F_FM.book Page 54 Monday, December 27, 2004 4:10 PM
Copying
B Press [1 Sided] or [2 Sided] for Original, and then press [Combine 2
Side] for Copy.
❖ Book→
→1 Sided
Copies a two-page spread original
onto two separate pages.
Reference
p.50 “Originals and copy orientation”
❖ Book→
→2 Sided
Copies a two-page spread original
onto a sheet, one page per side.
2
C Select the number of originals to
combine, and then press [OK].
D Select the paper size.
E Press [OK].
F Place the originals, and then press
the {Start}
} key.
Series Copies
This function copies the front and
back of a two-sided original separately, or two facing pages of a bound
original, onto two sheets.
❖ Front&Back→
→2 Sided
Copies both sides of a two-page
spread original onto both sides of a
sheet.
Limitation
❒ You cannot use the Series Copies
function with the ADF.
Note
❒ See the following table for original and copy paper sizes when
using a 100% ratio.
54
ThemisC1_EN_Copy_F_FM.book Page 55 Monday, December 27, 2004 4:10 PM
Copier Functions
❖ Metric version
Paper for
one-sided
copy
Paper for
two-sided
copy
A4K × 2
sheets
A4K × 1
sheet
(two-sided)
B4 JISL
B5 JISK ×
2 sheets
B5 JISK ×
1 sheet
(two-sided)
A4L
A5K × 2
sheets
A5K × 1
sheet
(two-sided)
Original
A3L
❖ Inch version
Original
Paper for
one-sided
copy
Paper for
two-side
copy
11" × 17"L 8 /2" ×
11"K × 2
sheets
8 /2 " ×
11"K × 1
sheets
(2-sided)
81/2" × 11"L 51/2" ×
81/2"K × 2
sheets
51/2" ×
11"K × 1
sheet
(two-sided)
1
1
E Press [OK].
F Make sure [Auto Paper Select] is selected.
G Place the original on the exposure
glass, and then press the {Start}
}
key.
2
Note
❒ Press the {#}
} key after all originals have been scanned.
Copying Book Originals
Copies two or more originals in page
order.
❖ 1 Sided → Booklet
Makes copies in page order for a
folded booklet.
❖ Open to left
❒ You cannot use the bypass tray
with Book→2 Sided or
Front&Back→2 Sided.
A Press [Dup./Combine/Series].
GCBOOK0E
❖ Open to right
B Press [Series / Book].
C Press [Series].
→1 Sided],
D Select [Book→
GCBOOK1E
[Book→
→2
Sided], or [Front&Back→
→ 2 Sided],
and then press [OK].
55
ThemisC1_EN_Copy_F_FM.book Page 56 Monday, December 27, 2004 4:10 PM
Copying
❖ 2 Sided → Booklet
Makes 2 sided originals into page
ordered copies for a folded booklet.
❖ Open to right
❖ Open to left
2
GCBOOK4E
GCAH010E
❖ 2 Sided→
→Magazine
Copies two or more two-sided
originals into magazine page order
copies (when folded and stacked).
❖ Open to left
❖ Open to right
GCAH030E
GCAH020E
❖ 1 Sided→
→Magazine
Copies two or more originals into
magazine page order copies (when
folded and stacked).
❖ Open to right
❖ Open to left
GCAH040E
GCBOOK3E
56
ThemisC1_EN_Copy_F_FM.book Page 57 Monday, December 27, 2004 4:10 PM
Copier Functions
How to fold copies to make a booklet
❒ The machine sets the reproduction
ratio automatically to fit the paper
size.
Reference
Related default settings:
p.113 “Erase Original Shadow in
Combine”
2
A Select
[Open to Left] or [Open to
Right] with User Tools.
GCBOOK2
1. Open to Left
2. Open to Right
How to fold and unfold copies to make a
magazine
❖ Open to left
Reference
p.116 “Orientation: Booklet,
Magazine”
B Press [Dup./Combine/Series].
C Press [Series / Book].
D Press [Book].
→Booklet], [2 Sided→
→E Select [1 Sided→
Booklet][1 Sided→
→Magazine], or [2
Sided→
→Magazine], and then press
[OK].
F Press [OK].
G Select the paper.
H Place the originals, and then press
the {Start}
} key.
GCBOOK5E
Note
❒ When placing originals on the
exposure glass or in the ADF using the Batch function, press the
{ #}
} key after all the originals
have been scanned.
❖ Open to right
GCBOOK6E
Note
❒ You cannot use the bypass tray
with this function.
57
ThemisC1_EN_Copy_F_FM.book Page 58 Monday, December 27, 2004 4:10 PM
Copying
Image Repeat
The original image is copied repeatedly.
K/Copy paper:
❖ Original: 51/2" × 81/2"K
K or Original: 51/2" ×
81/2" × 11"K
81/2"L
L/Copy paper: 81/2" × 11"L
L
4 repeats (65%)
16 repeats (32%)
2
Repeat2
Repeat1
There are two types of designation
methods for Image Repeat.
❖ Whole Area Repeat
Repeatedly copies the entire image.
❖ Specified Area Repeat
Repeatedly copies a specified portion of the image. Decide the base
point of the area, specify the length
and the width, and then specify the
location of the area.
Reference
Related Initial Settings
K/Copy paper:
❖ Original: 51/2" × 81/2"K
L or Original: 51/2" ×
81/2" × 11"L
81/2"L
L/Copy paper: 81/2" × 11"K
K
2 repeats
(100%)
8 repeats
(50%)
Repeat3
32 repeats
(25%)
Repeat4
Repeat5
A Select the size of the copy paper
and the reproduction ratio.
B Press [Edit / Color Creation].
See p.114 “Image Repeat Separation Line”
Whole Area Repeat
Note
❒ The number of repeated images
depends on the original size, copy
paper size, and reproduction ratio.
See the following table.
C Press [Edit Image].
D Press [Image Repeat].
E Make sure that [Whole Area] is selected, then press [OK].
F Press [OK] twice.
G Place the original, and then press
58
the {Start}
} key.
ThemisC1_EN_Copy_F_FM.book Page 59 Monday, December 27, 2004 4:10 PM
Copier Functions
H Enter the length of [Y1] with the
Specified Area Repeat
number keys, then press [#].
You can use this function only when
you are making a copy from the Exposure Glass.
I Enter the length of [X2] with the
Note
❒ The base point X1, Y1, and the
length set by point X2, Y2 determines the area of an image repeatedly copied.
the length of the [Y2] by
number keys, then press [#].
Limitation
❒ You cannot use the specified area
repeat from ADF.
number keys, then press [#].
J Enter
2
K Press [OK] three times.
L Place the original on the exposure
glass, and then press the {Start}
}
key.
Double Copies
One original image is copied twice
onto one sheet, as shown.
GCRE032E
1. Set on the exposure glass
A Specify the location of the area's
base point (X1, Y1), and its length
and width (X2, Y2).
Note
❒ You can set any value in the
range of X1: 0~412mm
( 0” ~ 1 6 . 2 ” ) , X 2 : 20 ~ 4 3 2 m m
(0.8”~17.0”), Y1: 0~277mm
(0”~10.8”), and Y2: 20~297mm
(0.8”~11.6”).
B Select the size of the copy paper
and the reproduction ratio.
C Press [Edit / Color Creation].
D Press [Edit Image].
E Press [Image Repeat].
F Press [Specified Area].
G Enter the length of [X1] with the
number keys, then press [#].
Note
❒ You cannot use the bypass tray
with this function.
❒ See the following table for original
and copy paper sizes and orientations when using a 100% ratio:
❖ Metric version
Original size and
orientation
Copy paper size
and orientation
A5L
A4K
A4K
A3L
A5K
A4L
B5 JISK
B4 JISL
59
ThemisC1_EN_Copy_F_FM.book Page 60 Monday, December 27, 2004 4:10 PM
Copying
❖ Inch version
2
Original size and
orientation
Copy paper size
and orientation
51/2" × 81/2"L
81/2" × 11"K
51/2" × 81/2"K
81/2" × 11"L
81/2" × 11"K
11" × 17"L
Centring
You can make copies with the image
moved to the center.
❒ Originals with a size of A5KL, B6
JISKL, 51/2" × 81/2"L cannot be
detected properly on the exposure
glass. Be sure to select the copy paper manually or place the originals
in the ADF.
GCCNTR0E
Reference
Related default settings:
p.115 “Double Copies Separation
Line”
A Press [Edit / Color Creation].
Note
❒ You cannot use the bypass tray
with this function.
❒ Original sizes and orientations for
centring are listed below.
❖ Metric version
Original
Original size and orientation
placed on:
B Press [Edit Image].
C Press [Double Copies].
D Press [OK] twice.
E Select the paper.
F Place the originals, and then press
the {Start}
} key.
60
Exposure
glass
A3L, B4 JISL, A4KL, B5
JISKL, 81/2" × 13"L
ADF
A3L, B4 JISL, A4KL, B5
JISKL, A5KL,
81/2" × 13"L
❖ Inch version
Original size and orientation
Original
placed on:
Exposure
glass
11" × 17"L, 81/2" × 14"L,
81/2" × 11"KL
ADF
11" × 17"L, 81/2" × 14"L,
81/2" × 11"KL,
51/2" × 81/2"KL, 10" × 14"L
ThemisC1_EN_Copy_F_FM.book Page 61 Monday, December 27, 2004 4:10 PM
Copier Functions
A Select the paper.
B Press [Edit / Color Creation].
❒ If [Two-color] (normal) is selected,
the white part of the original becomes black and the black part becomes white, and the colored part
is copied with the specified color.
❒ If [Red & Black] is selected, the
white part of the original becomes
black, the black part and the red
part becomes white, and the blue
part becomes red in color.
C Press [Edit Image].
D Press [Centring].
E Press [OK] twice.
F Place the originals, and then press
2
A Press [Edit / Color Creation].
the {Start}
} key.
Positive / Negative
If your original is black and white,
copy images are inverted.
B Press [Edit Image].
C Press [Positive / Negative].
D Press [OK] twice.
E Select the paper.
F Place the originals, and then press
the {Start}
} key.
Mirror
GCHATN1E
Note
❒ If your original is black and white,
copy images are inverted. If your
original is color, the density, darkness and brightness of each color
will be reversed and inverted to
complimentary colors.
❒ If the {Single Color}
} key is selected,
copy images are copied in white
and specified colors.
Copies by reversing the image from
left to right, as reflected in a mirror.
GCMILL1J
61
ThemisC1_EN_Copy_F_FM.book Page 62 Monday, December 27, 2004 4:10 PM
Copying
Note
❒ Copy results may differ depending
on the set orientation of the originals.
❖ Center/Border
Erases both the original's center
and edge margins from the copy.
A Press [Edit / Color Creation].
B Press [Edit Image].
C Press [Mirror Image].
D Press [OK] twice.
E Place the originals, then press the
2
{Start}
} key.
GCCENT3E
Erase
You can erase the center and/or all
four sides of the original image.
This function has three modes:
❖ Border
Erases the original's edge margin
from the copy.
Reference
The erase width is set to 10 mm
(0.4”) as default. You can
change this setting with User
Tools.
p.113 “Erase Center Width”
p.113 “Erase Border Width”
Note
❒ The relationship between the original orientation and erased area is
as follows:
L original
K original
GCCENT2E
❖ Center
Erases the original's center margin
from the copy.
62
GCCENT1E
❒ 1: Erased part
❒ 2: 2–99 mm (0.1”–3.9”)
ThemisC1_EN_Copy_F_FM.book Page 63 Monday, December 27, 2004 4:10 PM
Copier Functions
Border Erase
Selecting [Diff. Width]
A Press [Edit / Color Creation].
A Press [Diff. Width].
B Press the key for the border
you want to change, and then
set the erase border width using [n
n] and [o
o].
B Press [Erase / Margin Adj.].
C Press [Erase].
D Set the erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set the erase border width using [n
n] and [o
o].
2
C Press [OK].
E Press [OK] twice.
F Place the originals, and then press
the {Start}
} key.
Center erase
A Press [Edit / Color Creation].
Note
❒ To change the value entered,
press [n
n] and [o
o] to set the
new value.
C Press [OK].
B Press [Erase / Margin Adj.].
C Press [Erase].
D Press [Center].
E Set the erase center width using
[n
n] and [o
o], and then press [OK].
F Press [OK] twice.
G Place the originals, and then press
the {Start}
} key.
63
ThemisC1_EN_Copy_F_FM.book Page 64 Monday, December 27, 2004 4:10 PM
Copying
Center/border erase
Selecting [Diff. Width]
A Press [Edit / Color Creation].
A Press [Diff. Width].
B Press the key for the part you
want to change, and then set
the erase margin width using
[n
n] and [o
o].
2
B Press [Erase / Margin Adj.].
C Press [Erase].
D Press [Center / Border].
E Set the center and border
C Press [OK].
to be
erased.
Selecting [Same Width]
A Press [Same Width].
B Press [Center], and then set the
erase center width using [n
n]
and [o
o].
C Press [Border], and then set the
erase border width using [n
n]
and [o
o].
D Press [OK].
64
F Press [OK] twice.
G Place the originals, and then press
the {Start}
} key.
Margin Adjustment
You can make a binding margin.
Reference
Related default settings:
p.112 “Front Margin: Left/Right”
p.112 “Back Margin: Left/Right”
p.113 “Front Margin: Top/Bottom”
p.113 “Back Margin: Top/Bottom”
p.113 “1 Sided→2 Sided Auto Margin: TtoT”
ThemisC1_EN_Copy_F_FM.book Page 65 Monday, December 27, 2004 4:10 PM
Copier Functions
Note
❒ You can change the width of the
binding margin as follows:
G Place the originals, and then press
the {Start}
} key.
Metric
version
0–30 mm (increments of 1 mm)
Background Numbering
Inch
version
0"–1.2" (increments of 0.1")
Use this function to have numbers
printed on the background of copies.
2
A Press [Edit / Color Creation].
GCSTMP2E
B Press [Erase / Margin Adj.].
C Press [Margin Adjustment].
D Set a binding margin for the front
pages. Press [←
←] and [→
→] when
setting the left and right margins,
and [↓
↓] and [↑
↑] when setting the
top and bottom margins.
Note
❒ You cannot use the bypass tray
with this function.
❒ The default stamp color is black.
Reference
Related Initial Settings p.116
“Background Numbering”
A Press [Edit / Color Creation].
Note
❒ To change the value entered,
press [←
←], [→
→], [↓
↓], [↑
↑] to set it.
❒ If you do not need to specify
margins for back side pages,
proceed to step F.
E Set
a binding margin for back
side pages. Press [←
← ] and [→
→]
when setting the left and right
margins, and [↓
↓] and [↑
↑] when setting the top and bottom margins.
Note
❒ Margins on the back side of the
page are possible only when [2
Sided] or [Combine 2 Side] is selected.
F Press [OK] 3 times.
B Press [Stamp].
C Press [Background Numbering].
D Enter the number to start counting from with the number keys.
Note
❒ To change the entered number,
press [Clear] or {Clear/Stop}
} and
enter the new number.
65
ThemisC1_EN_Copy_F_FM.book Page 66 Monday, December 27, 2004 4:10 PM
Copying
E Press [OK] 3 times.
F Place the originals, then press the
Stamp position and original orientation
{Start}
} key.
Changing the stamp color
A Press [Stamp Color].
B Select the stamp color, then press
2
[OK].
Preset Stamp
Frequently used messages can be
stored in memory and stamped on
copies.
GCSTMP5E
GCSTMP1E
One of the following eight messages
can be stamped on copies with a
frame around it:
"COPY", "URGENT", "PRIORITY",
"For Your Info.", "PRELIMINARY",
"For Internal Use Only", "CONFIDENTIAL", "DRAFT".
Note
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
at a time.
❒ The default stamp color is black.
Reference
p.116 “Stamp Priority”
p.116 “Stamp Language”
p.116 “Stamp Position”
p.117 “Stamp Format”
p.117 “Stamp Color”
A Press [Edit / Color Creation].
66
ThemisC1_EN_Copy_F_FM.book Page 67 Monday, December 27, 2004 4:10 PM
Copier Functions
B Press [Stamp].
C Press [Preset Stamp].
D Select the message.
E Press [All Pages] or [1st Page Only] to
User Stamp
Prints a registered stamp onto copies.
select the print page.
Note
❒ You can change the color, position, size, and density of the
stamp. See p.67 “Changing the
stamp color”. See p.67 “To
change stamp position, size,
and density”.
F After you have specified all necessary settings, press [OK].
G Press [OK] twice.
H Place the originals, and then press
2
GCSTMP0E
Preparation
You have to register a user stamp
before using this function. See p.68
“To program the user stamp”.
Stamp position and original orientation
the {Start}
} key.
Changing the stamp color
A Press [Stamp Color].
B Select the stamp color, then press
[OK].
To change stamp position, size, and
density
A Press [Change].
B Select the position for print, size,
and density, and then press [OK].
Note
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
at a time.
❒ The default stamp color is black.
67
ThemisC1_EN_Copy_F_FM.book Page 68 Monday, December 27, 2004 4:10 PM
Copying
Reference
Related default settings:
p.117 “Stamp Position 1 - 4”
p.117 “Stamp Format 1 - 4”
p.118 “Stamp Color: 1 - 4”
A Press [Edit / Color Creation].
2
Changing the stamp color
A Press [Stamp Color].
B Select the stamp color, then press
[OK].
To change the stamp position
A Press [Change].
B Select the position, and then press
[OK].
B Press [Stamp].
C Press [User Stamp].
D Select the stamp number.
E Press [All Pages] or [1st Page Only] to
select the print page.
Note
❒ You can change the stamp color
and position. See p.68 “Changing the stamp color”.See p.68
“To change the stamp position”.
F After
all settings are complete,
press [OK].
G Press [OK] twice.
H Place the originals, and then press
the {Start}
} key.
68
To program the user stamp
Note
❒ The range of stamp images for
readability is 10–297 mm high
(0.4"–11.7") and 10–432 mm wide
(0.4"–17.0"). However, if the value
exceeds the maximum area (5,000
mm2, 7.75 inch2), it is automatically
adjusted to range.
❒ Up to four frequently used images
can be stored in memory.
A Make
sure the machine's copier
function is selected.
B Press the {User Tools/Counter}} key.
ZFLS110N
ThemisC1_EN_Copy_F_FM.book Page 69 Monday, December 27, 2004 4:10 PM
Copier Functions
C Press [Copier / Document Server Features].
L Place the original for user stamp
on the exposure glass, and then
press [Start Scanning].
The original is scanned, and the
stamp is registered.
Note
❒ Originals cannot be scanned
from the ADF when programming the user stamp.
D Press [Stamp].
E Press [User Stamp].
F Press [Program / Delete Stamp].
G Press [Program], and then press the
stamp number (1–4) you want to
program.
Note
❒ Stamp numbers displayed with
m next to them already have
settings.
❒ If the stamp number is already
in use, the machine will ask you
if you want to overwrite it.
Press [Yes] or [No].
H Enter the user stamp name using
2
M Press [Exit].
N Press [Exit].
The Copier / Document Server
Features main menu is displayed.
O Press [Exit].
Exits settings and gets ready to
copy.
To delete the user stamp
Important
❒ You cannot restore a deleted stamp.
A Make
sure the machine's copier
function is selected.
B Press the {User Tools/Counter}} key.
the letter keys on the display panel. You can register up to 10 characters.
I Press [OK].
Reference
“Entering Text”, General Settings Guide
ZFLS110N
C Press [Copier / Document Server Features].
J Enter
the horizontal size of the
stamp using the number keys,
and then press [#].
K Press [Vertical], and then enter the
vertical size of the stamp using
the number keys, and then press
[#].
69
ThemisC1_EN_Copy_F_FM.book Page 70 Monday, December 27, 2004 4:10 PM
Copying
D Press [Stamp].
E Press [User Stamp].
F Press [Program / Delete Stamp].
G Press [Delete], and then press the
Stamp position and original orientation
stamp number you want to delete.
2
H Select [Delete], and then press [Exit].
I Press [Exit].
The Copier / Document Server
Features main menu is displayed.
J Press [Exit].
Exits settings and gets ready to
copy.
Date Stamp
You can use this function to print
dates onto copies.
GCSTMP7E
Note
❒ You cannot use the bypass tray
with this function.
❒ The default stamp color is black.
Reference
Related default settings:
AFT036S
You can select from the following
date formats:
• MM/DD/YYYY
• MM.DD.YYYY
• DD/MM/YYYY
• DD.MM.YYYY
• YYYY.MM.DD
70
p.118 “Format”
p.118 “Font”
p.118 “Stamp Position”
p.118 “Stamp Setting”
p.118 “Size”
p.118 “Superimpose”
p.118 “Stamp Color”
“Timer Settings”, General Settings
Guide
ThemisC1_EN_Copy_F_FM.book Page 71 Monday, December 27, 2004 4:10 PM
Copier Functions
A Press [Edit / Color Creation].
To change the date format
A Press [Change Format].
2
B Press [Stamp].
C Press [Date Stamp].
D Press [All Pages] or [1st Page Only] to
B Select the date format, and then
press [OK].
select the print page.
To change the stamp position
A Press [Change].
B Select the date
stamp position,
and then press [OK].
Note
❒ You can change the color, format and position of the date
stamp. See p.71 “Changing the
stamp color”, p.71 “To change
the date format”.
E After
all settings are complete,
press [OK].
F Press [OK] twice.
G Place the originals, and then press
the {Start}
} key.
Changing the stamp color
A Press [Stamp Color].
B Select the stamp color, then press
[OK].
71
ThemisC1_EN_Copy_F_FM.book Page 72 Monday, December 27, 2004 4:10 PM
Copying
Page Numbering
You can use this function to print
page numbers onto copies.
Note
❒ You cannot use the bypass tray
with this function.
❒ The default stamp color is black.
Reference
Related default settings:
2
CP2G0100
There are six types of Page Numbering (“n” is the total number of pages
in original):
• P1, P2,…Pn
• 1/n, 2/n,...n/n
• -1-, -2-,...-n• P.1, P.2,...P.n
• 1, 2…n
• 1-1, 1-2,..1-n
p.118 “Stamp Format”
p.118 “Font”
p.118 “Size”
p.119 “Duplex Back Page Stamping Position”
p.119 “Page Numbering in Combine”
p.119 “Stamp Position”
p.119 “Superimpose”
p.119 “Stamp Color”
A Press [Edit / Color Creation].
Stamp position and orientation of originals
B Press [Stamp].
C Press [Page Numbering].
D Select the format.
GCSTMP8E
72
ThemisC1_EN_Copy_F_FM.book Page 73 Monday, December 27, 2004 4:10 PM
Copier Functions
Note
❒ You can specify the Stamp Color,
position, pages to be stamped,
and numbering. See “Changing
the stamp color”, “To change
the stamp position”, “Specifying the first printing page and
start number”.
E After
all settings are complete,
press [OK].
F Press [OK] twice.
G Place the originals, and then press
the {Start}
} key.
Changing the stamp color
A Press [Stamp Color].
B Select the stamp color, then press
Specifying the first printing page and
start number
If you selected (P1, P2…, -1-,-2-…,
P.1, P.2…, 1, 2…, )
2
Note
❒ The following explanation uses P1,
P2... as an example. The steps are
the same for other selections.
A Press [Change] on the right side.
B Press [First Printing Page], then en-
ter the original page number from
which to start printing using the
number keys, and then press the
{#}
} key.
[OK].
To change the stamp position
A Press [Change].
B Select the position, and then press
[OK].
Note
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
}
k ey , an d t he n e n t er a ne w
number.
C Press [Numbering from / to], enter the
number of the page from which to
start numbering using the
number keys, and then press the
{#}
} key.
73
ThemisC1_EN_Copy_F_FM.book Page 74 Monday, December 27, 2004 4:10 PM
Copying
Note
❒ The example below shows the
first printing page as “2”and the
start number as “3”.
B Press [First Printing Page], then en-
ter the original page number from
which to start printing using the
number keys, and then press the
{#}
} key.
2
GCANPE2J
D Press [Last Number], enter the number
of the page to stop numbering using the number keys, and then
press the {#}
} key.
Note
❒ If you want to number all pages
to the end, press [to the End].
E When
page designation is complete, press [OK].
F Press [OK] 3 times.
If you selected (1/5, 2/5…)
A Press [Change] on the right hand
side of the display.
74
Note
❒ You can enter between 1 and
9 99 9 f o r t h e o r ig i n a l p a g e
number from which to start
printing.
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
}
k ey , an d t he n e n t er a ne w
number.
C Press [Numbering from / to], then en-
ter the number of page from
which to start numbering using
the number keys, and then press
the {#}
} key.
D Press [Last Number], then enter the
number of page at which to stop
numbering using the number
keys, and then press the {#}
} key.
Proceed to step E when not changing.
Note
❒ To print on the last page, press
[to the End].
❒ The last number is the last page
number printed. For example, if
[Total Pages] is ten, if you want
to print seven pages up to page
7, enter [7] as the [Last Number].
❒ Normally, you do not need to
enter this number.
ThemisC1_EN_Copy_F_FM.book Page 75 Monday, December 27, 2004 4:10 PM
Copier Functions
E Press [Total Pages], enter the total
number of original pages using
the number keys, and then press
the {#}
} key.
F When
page designation is complete, press [OK].
Note
❒ To change the settings after pressing [OK], press [Change], and
then enter the numbers again.
G Press [OK] 3 times.
Note
❒ You can enter between 1 and
9999 for the chapter number
from which to start numbering.
D Press [Numbering from / to], and then
en ter the p ag e nu mb er fr om
which to start numbering using
the number keys, and then press
the {#}
} key.
2
E When
page designation is complete, press [OK].
F Press [OK] 3 times.
If you selected (1-1, 1-2,…)
A Press [Change] on the right hand
side.
B Press [First Printing Page], and then
enter the original page number
from which to start printing using
number keys, and then press the
{#}
} key.
Note
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
}
k ey , an d th e n e n t er a n e w
number.
C Press [First Chapter No.], enter the
Covers
You can use this function to create
cover sheets by adding additional
pages of different paper, or copying
existing pages onto different paper.
Preparation
Before selecting this function, set
the tray for front cover sheets. See
“Cover Sheet Tray” in “Tray Paper
Settings”, General Settings Guide.
Note
❒ The cover sheet should be the same
size and orientation as the copy paper.
❒ You cannot use the bypass tray
with this function.
❒ When selecting Copy, select whether the front and back covers are
copied one-sided or two-sided. See
“Cover Sheet Tray” in “Tray Paper
Settings”, General Settings Guide.
chapter number from which to
start numbering using the
number keys, and then press the
{#}
} key.
75
ThemisC1_EN_Copy_F_FM.book Page 76 Monday, December 27, 2004 4:10 PM
Copying
❖ Front cover
The first page of originals is copied
onto a specified cover sheet paper,
or a cover sheet is inserted before
the first copy page.
• Copy
A Press [Cover / Slip Sheet].
2
B Press
[Front Cover] or [Front/ Back
Cover].
C Select [Copy] or [Blank] for the cov-
• Blank
er sheet.
D Select the paper tray containing
the paper to copy the originals onto, and then press [OK].
E Place
the originals in the ADF,
and then press the {Start}
} key.
❖ Front/Back covers
The first and last page of original is
copied onto a specified cover sheet
paper.
• Copy
Designate
You can use this function to copy certain pages of your original onto slip
sheets.
AFS028S
• Blank
Reference
p.113 “Front Cover Copy in
Combine”
76
Preparation
Before using this function, set the
special paper tray for slip sheets.
See "Cover Sheet Tray" and "Slip
Sheet Tray" in "Tray Paper Settings", General Settings Guide.
ThemisC1_EN_Copy_F_FM.book Page 77 Monday, December 27, 2004 4:10 PM
Copier Functions
Note
❒ The paper for slip sheets should be
the same size as the copy paper
and should be set in the same direction.
❒ You cannot select the bypass tray
for sheet paper to copy the originals.
❒ You can specify up to 20 pages.
Chapter
The pages you specify with this function will appear on the front of copy
sheets.
2
A Press [Cover / Slip Sheet].
GCSHOW0J
B Press [Desig. / Chapter].
C Press the key to select the chapter
number.
D Enter
the page number of the
original's location you want to
copy onto a slip sheet with the
number keys, and then press the
{#}
} key.
Preparation
Before selecting this function,
press the [Dup./Combine/Series] key
and select Duplex (1 Sided → 2
Sided) mode or Combine mode.
Note
❒ You can specify up to 20 pages.
❒ This function can be used only
when you select the Duplex (1
Sided→2 Sided) or Combine function.
A Press [Cover / Slip Sheet].
E To
specify another page, repeat
steps C to D.
Note
❒ To select chapters 11 to 20, press
the [T
T11~20] key.
F When
page designation is complete, press [OK].
G Press [OK].
H Select the paper
tray containing
the paper to copy the originals onto.
B Press [Desig. / Chapter].
C Press [Chapter].
D Press the key to select the chapter
number.
I Set originals, then press the {Start}}
key.
77
ThemisC1_EN_Copy_F_FM.book Page 78 Monday, December 27, 2004 4:10 PM
Copying
E Enter the number of the first page
of the first chapter using the
number keys. Then, press the {#}
}
key.
❖ When using OHP transparencies from
the bypass tray
• Copy
F To
specify another page, repeat
steps D to E.
2
Note
❒ To select chapters 11 to 20, press
the [T
T11~20] key.
G When
• Blank
page designation is complete, press [OK].
H Press [OK].
I Set originals, and then press the
{Start}
} key.
Slip Sheets
Every time the originals' page changes, a slip sheet is inserted. This function can be used to automatically
insert a slip sheet between OHP
transparencies, or as a stacking function. You can also copy onto slip
sheets.
A Press [Cover / Slip Sheet].
B Press [Slip Sheet].
C Select [Copy] or [Blank], and then
press [OK].
D Select the paper tray containing
the sheet paper to copy the originals.
Preparation
Before selecting this function, set
the tray for slip sheets. See “Slip
Sheet Tray” in “Tray Paper Settings”, General Settings Guide.
Note
❒ Load slip sheets in the same size
and orientation as copy paper or
OHP transparencies.
78
E Place the originals, and then press
the {Start}
} key.
ThemisC1_EN_Copy_F_FM.book Page 79 Monday, December 27, 2004 4:10 PM
Storing Data in the Document Server
Storing Data in the Document Server
The Document Server enables you to
store documents in memory and print
them as you want.
Important
❒ Machine failure can result in data
loss. Important data stored on the
hard disk should be backed up.
The manufacturer shall not be responsible for any damage that
might result from loss of data.
Note
❒ Data stored in the Document Server is deleted after three days by setting default. You can specify a
period after which stored data is
automatically deleted. For more
information about settings, see
“Auto Delete File” in “Administrator Tools”, General Settings Guide.
Reference
For details about how to register the user name, file name, or
password, see “To register or
change a user name”, and “To
set or change a password”, General Settings Guide.
2
C Press [OK].
D Place the originals.
Reference
For more information about the
types of originals that can be
placed and how to place them,
see p.13 “Placing Originals”.
E Make
the scanning settings for
the originals.
A Press [Store File].
F Press the {Start}} key.
B Enter a user name, file name, or
password if necessary.
Originals are scanned and stored
in memory.
Note
❒ To stop scanning, press the
{ Clear/Stop}
} key. To resume a
paused scanning job, press [Continue] in the confirmation display. To delete saved images
and cancel the job, press [Stop].
❒ When placing an original on the
exposure glass, press the { #}
}
key after all the originals have
been scanned.
79
ThemisC1_EN_Copy_F_FM.book Page 80 Monday, December 27, 2004 4:10 PM
Copying
❒ To check that the document has
been stored, press the { Document Server}
} key to display the
document selection screen.
❒ When the machine is printing a
document stored using the copier function, wait until printing
has finished before you store
another copy document.
❒ To print stored documents, see
“Printing Stored Documents”,
General Settings Guide.
2
80
ThemisC1_EN_Copy_F_FM.book Page 81 Monday, December 27, 2004 4:10 PM
Programs
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode
or Program No.10 as the default
mode to be set when modes are
cleared or reset, or immediately after the operation switch is turned
on. See p.109 “Change Initial
Mode”.
❒ Paper settings are stored based on
paper size. However, if you have
more than one paper tray containing same size paper, the tray prioritized with User Tools (System
Settings) is selected first. See “Paper Tray Priority” in “Tray Paper
Settings”, General Settings Guide.
❒ Programs are not deleted by turning the power off or pressing the
{Clear Modes}
} key. They are canceled only when you delete or
overwrite them with another program.
C Press [Register].
2
D Press
the program number you
want to store.
Note
❒ Program numbers displayed with
m next to them already have
settings.
Reference
p.82 “Changing a stored program”
E Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.
Storing a Program
A Edit the copy settings so all func-
tions you want to store in this program are selected.
B Press the {Program}} key.
Reference
For details about entering characters, see “Entering Text”, General Settings Guide.
AFZ036S
Note
❒ If you do not want to enter a
program name, proceed to step
F.
81
ThemisC1_EN_Copy_F_FM.book Page 82 Monday, December 27, 2004 4:10 PM
Copying
F Press [OK].
When the settings are successfully
stored, the program name is displayed on the right side of the registered program number. The
display returns to the initial copy
display for a while.
2
Changing a stored program
A Check the program settings.
D Press [Yes].
The program is deleted, and the
display returns to the initial copy
display.
Recalling a Program
A Press the {Program}} key.
B Press [Recall].
Note
❒ To check the contents of a program, recall it. See p.82 “Recalling a Program”.
B Repeat steps A to D of “Storing a
Program”.
C Press [Register].
Repeat steps E and F of ”Storing a
Program”.
Note
❒ When overwritten, the previous
program is deleted.
Deleting a Program
A Press the {Program}} key.
B Press [Delete].
C Press the number of the program
you want to delete.
82
C Press the number of the program
you want to recall.
The stored settings are displayed.
Note
❒ Program numbers displayed with
m next to them already have
settings.
D Place the originals, and then press
the {Start}
} key.
ThemisC1_EN_Copy_F_FM.book Page 83 Monday, December 27, 2004 4:10 PM
3. Color Adjustment/Program
Color Adjustment
This function lets you alter up to three
single colors by mixing them with adjacent colors in the color circle.
Reference
For types and examples of image
adjustment functions, see p.iii
“What You Can Do with This Machine <Color Functions/Color Adjustments>”.
Note
❒ You can adjust up to 3 colors from
yellow, red, magenta, blue, cyan,
or green at the same time.
❒ This function is only available in
Full Color mode.
E Press [OK].
Note
❒ The indicator of the {Adjust/Program Color}
} key will light up
when adjusting the color.
❒ The adjusted settings will be deleted and the initial values will
be reset, when Auto Clear has
be en p er fo r m e d , w h en t h e
{ Clear Modes } key has been
pressed or when the power has
been turned off.
A Press the {Adjust/Program Color}} key.
AFZ037S
B Press [Adjust Color].
The color circle is displayed.
C Select the colors you want to adjust.
You can select up to 3 colors.
←] or [→
→].
D Adjust the color using [←
Note
❒ Refer to the color circle on the
control panel.
83
ThemisC1_EN_Copy_F_FM.book Page 84 Monday, December 27, 2004 4:10 PM
Color Adjustment/Program
Color Balance
You can adjust the overall color tone
when the overall copy is reddish or
bluish.
Reference
For types and examples of the image adjustment functions, see p.iii
“What You Can Do with This Machine <Color Functions/Color Adjustments>”.
3
A Press the {Adjust/Program Color}} key.
AFZ037S
B Make sure that [Color Balance] is
selected.
❒ The adjusted settings will be deleted and the initial values will
be reset when either Auto Clear
has been performed, when the
{ Clear Modes } key has been
pressed or when the power has
been turned off.
Color Balance Program
You can also store the color balance
setting in memory and recall it when
you want to use it.
Note
❒ You can store up to 3 programs.
❒ To change the registered settings,
register them again. Previously
registered settings will be overwritten.
Storing the adjusted color balance
iLighter] or
C Adjust by pressing [i
[Darkerj
j].
Note
❒ You can also register the adjusted settings. See p.84 “Color Balance Program”.
D Press [OK].
Note
❒ The indicator of the {Adjust/Program Color}
} key will light up
when adjusting the color balance.
84
A Press the {Adjust/Program Color}} Key.
Reference
See p.84 “Color Balance”.
B Press [Program Color Balance].
C Press [Program].
D Select a number (1–3) for this setting.
The color balance setting will be
registered in the selected number.
Note
❒ If you select the program number
key where the m is displayed,
the previously registered settings will be overwritten. See
p.85 “Changing the registered
settings”.
E Press [OK].
ThemisC1_EN_Copy_F_FM.book Page 85 Monday, December 27, 2004 4:10 PM
Color Balance
Changing the registered settings
A Press the {Adjust/Program Color}} key.
B Make sure that [Color Balance] is
selected, and then press [Program
Color Balance].
C Select the program number (1–3)
whose settings you want to
change.
The registered color balance is displayed.
D Change the registered settings.
E After the registered settings are
changed, press [Program Color Balance].
F Press
[Program], and then select
the program number to be overwritten.
D Press [OK].
E Place the originals, and then press
the {Start}
} key.
Note
❒ The adjusted settings will be deleted and the initial values will
be reset when either Auto Clear
has been performed, when the
{ Clear Modes } key has been
pressed or when the power has
been turned off.
3
Deleting the registered settings
A Press the {Adjust/Program Color}} key.
B Make sure that [Color Balance] has
been selected, and then press [Program Color Balance].
C Press [Delete], and then select the
program that you want to delete.
D Press [Yes].
E Press [OK].
G Press [Register].
The settings are changed.
H Press [OK].
Copying with the registered settings
A Press the {Adjust/Program Color}} key.
B Make sure that [Color Balance] is
selected, and then press [Program
Color Balance].
C Make sure that [Recall] has been
selected, and then select the program that you want to use.
85
ThemisC1_EN_Copy_F_FM.book Page 86 Monday, December 27, 2004 4:10 PM
Color Adjustment/Program
Image Adjustment
Reference
For types and examples of the image adjustment functions, see p.iii
“What You Can Do with This Machine <Color Functions/Color Adjustments>”.
You can make the following types of
image adjustments.
3
❒ The adjusted settings will be deleted and the initial values will
be reset when either Auto Clear
has been performed, when the
{ Clear Modes } key has been
pressed or when the power has
been turned off.
A Press the {Adjust/Program Color}} key.
❖ Sharp / Soft
Adjusts the outline of an image.
❖ Contrast
Adjusts the shades of an image.
❖ Background Density
Adjusts the background density of
an image.
❖ Adjust U.C.R.
Adjusts the amount of black toner
used in order to vividly express the
black areas in an image.
❖ Text / Photo Sensitivity
Adjusts the standard level in judging the image in the text and the
photo part, when using “Text /
Photo”.
Note
❒ “Sharp / Soft”, “Contrast”, “Background Density” can each be adjusted. However, their
adjustments can affect the level
of other adjustment functions.
❒ When adjusting the image quality, the indicator of the { Adjust/Program Color}
} key will light
up.
AFZ037S
B Press [Copy Quality].
C Adjust the settings.
Adjusting the sharpness/softness
A Adjust by pressing [Soft] or
[Sharp].
B Press [OK].
Adjusting the contrast
A Adjust by pressing [Low] or
[High].
B Press [OK].
86
ThemisC1_EN_Copy_F_FM.book Page 87 Monday, December 27, 2004 4:10 PM
Image Adjustment
Adjusting the background density
A Adjust by pressing [i
iLighter]
or [Darkerj
j].
Note
❒ Adjust to a lighter density
when copying dark textured
originals, such as newspaper
or recycled paper.
❒ Adjust to a darker density
when darkening the color of
markers or highlighters.
However, highlighter pen
colors are difficult to reprodu c e. D ep e n d ing o n t he
color used, they may not
come out on copies, or may
come out as a different color.
B Press [OK].
Adjusting the text/photo
sensitivity
A Press [T
TNext].
B Adjust by pressing [Text] or
[Photo].
3
Note
❒ Adjust toward “Text” if parts
of the texts are faded or are
not clear. Adjust toward
“Photo” if the outline of photos becomes dark.
C Press [OK].
Adjusting the U.C.R.
A Adjust by pressing [i
iLighter]
or [Darkerj
j].
B Press [OK].
87
ThemisC1_EN_Copy_F_FM.book Page 88 Monday, December 27, 2004 4:10 PM
Color Adjustment/Program
User Color
You can register colors created by adjusting the density of yellow, magenta, cyan, and black. You can also
name the colors that you register, and
print out registered colors.
Reference
For types and examples of the image adjustment functions, see p.iii
“What You Can Do with This Machine <Color Functions/Color Adjustments>”.
3
The following show you how to
create colors:
• Adjust the density of each color using the density of a chosen basic
color.
• Directly specify the density of each
color using the number keys.
Note
❒ Adjust the colors to be registered
such that the total density of yellow, magenta, cyan, and black is
under 255%.
❒ When the total density of a registered color is over 256%, it will be
corrected to 255%.
❒ When copying with user colors,
the finer shades may vary depending on the condition of the machine.
❒ In order to correctly reproduce
originals, the values entered are
corrected by the machine, and copies are made using the optimum
values. Therefore, there may be
slight color differences when copying using “Text” and when using
“Photo”.
❒ Up to 15 colors can be registered.
88
❒ Sample prints of user colors can
also be made on an A4K, 81/2" ×
11"K size page or on an A3L, 11"
× 17"L size page.
❒ Printing out a user color sample
will be counted under the full color
counter.
Adjusting Colors Based on the
Selected Color
A Press the {Adjust/Program Color}} key.
AFZ037S
B Press [User Color].
C Select
the number (1–15) you
want to store the user color in.
Note
❒ The settings of the user color
will change when selecting the
number already displayed by
the color name.
D Select the color
to be used as a
base from [Basic Color].
The density of each color for the selected color is displayed.
ThemisC1_EN_Copy_F_FM.book Page 89 Monday, December 27, 2004 4:10 PM
User Color
Note
❒ Press [Custom Setting] to directly
specify the density of each color
with the number keys. See p.89
“Mixing Colors Manually with
the Number Keys”
Selecting from user colors
A Press [User Color].
B Select from the registered colors.
E Specify the color density.
Using [n
n] [o
o]
A Specify the density in percentages (%) using [n
n] or [o
o].
❒ If you enter the wrong densit y , p r e s s [ Cl e a r] o r t h e
{Clear/Stop}
} key, and then reenter the correct density.
❒ Repeat steps B and C to
specify the density of multiple colors.
When renaming a color
A Press [Change Name].
B Enter the name of the color (up
to 16 characters), and then
press [OK].
3
Reference
“Entering Text” General Settings Guide.
F Check the density and the name
of the color, and then press [OK].
G Press [Exit].
Using [With Number keys]
A Press [With Number keys].
B Select the color that you want
to adjust.
C Enter the density in percentages (%) using the number keys,
and then press [#].
Mixing Colors Manually with
the Number Keys
A Press the {Adjust/Program Color}} key.
B Press [User Color].
C Select the number (1–15) that you
want to store the user color in.
Note
❒ The settings of the user color
will change when selecting the
number already displayed by
the color name.
Note
❒ If you want to use [n
n] or
[o
o], press [With no].
D Press [Custom Setting].
E Select the color that you want to
adjust.
89
ThemisC1_EN_Copy_F_FM.book Page 90 Monday, December 27, 2004 4:10 PM
Color Adjustment/Program
F Enter the density in percentages
(%) with the number keys, and
then press [#].
When renaming a color
A Press [Change Name].
B Enter the name of the color (up
to 16 characters can be used),
and then press [OK].
3
Reference
“Entering Text” General Settings Guide.
G Check
the names of each color,
and then press [OK].
Note
❒ Repeat steps E to G if you want
to specify the density of multiple colors.
H Press [Exit].
Deleting User Colors
Note
❒ You cannot delete colors registered
in the program or registered colors
currently in use.
A Press the {Adjust/Program Color}} key.
B Press [User Color].
C Press [Delete].
D Select the number of the user
color you want to delete.
E Press [Delete].
F Press [Exit].
90
Sampling the User Colors
A Press the {Adjust/Program Color}} key.
B Press [User Color].
C Make sure that the paper is of the
correct size, and then press [Print
Sample of User Color].
The sample of user colors is output
to the standard tray.
Note
❒ The user colors will be copied
on a A4K, 81/2" × 11"K sheet or
a A3L, 11" × 17"L sheet.
ThemisC1_EN_Copy_F_FM.book Page 91 Monday, December 27, 2004 4:10 PM
4. Troubleshooting
If Your Machine Does Not Operate As You
Want
When a Message Is Displayed
The following chart contains explanations of common messages. If other messages are displayed, then follow the instructions as displayed.
Note
❒ For messages not listed here, see “Troubleshooting” General Settings Guide.
Message
Causes
Solutions
Cannot detect
original size.
An irregular original is
placed. See p.11 “Sizes difficult to detect”.
Place custom size originals on the
exposure glass. See p.14 “Placing
Originals on the Exposure Glass”.
Enter the horizontal and vertical
size of the custom size original. See
p.14 “Placing Originals on the Exposure Glass”.
Select paper manually, not with the
Auto Paper Select function.
Do not use the Auto Reduce / Enlarge function.
Original is not placed.
Place originals.
Check original
orientation.
There is no copy paper in
the same orientation as the
originals.
Place the original in the same orientation as the copy paper.
Check paper size.
An irregular paper size is
set.
} key and copying
Press the {Start}
will start on the selected paper.
Rotate Sort is not
available with
this image size.
A paper size for which Ro- Select a proper paper size. See p.126
tate Sort is not available is “Sort, Rotate Sort, Stack”.
selected.
It is over stapling capacity.
The number of sheets per
Check the stapler capacity. See p.127
set is over the staple capac- “Staple”.
ity.
Cannot staple paper of this size.
The Staple function cannot
be used with the paper size
selected.
Select a paper size that can be used
with the Staple function. See p.127
“Staple”.
Duplex is not
available with
this paper size.
A paper size not available
when using the Duplex
function has been selected.
Select a proper paper size. See p.129
“Duplex”.
91
ThemisC1_EN_Copy_F_FM.book Page 92 Monday, December 27, 2004 4:10 PM
Troubleshooting
Message
Causes
Solutions
Maximum number of
sets is *.
The number of copies exceeds maximum copy
quantity.
You can change the maximum copy
quantity. See p.109 “Max. Copy
Quantity”.
Cannot copy. Orig- The Document Server function is in use.
inal is being
scanned by another
function.
4
You do not have the
privileges to use
this function.
The use of this function is
restricted to authentified
users only.
Contact the administrator.
Authentication has
failed.
The entered login user
name or login password is
not correct.
Inquire the user administrator for
the correct login user name and
login password.
The machine cannot perform authentication.
Contact the administrator.
You have tried to delete
Selected files
files without the authority
contain file(s)
that the user does to do so.
not have access
privileges to.
Please note that
only the files
with access privileges will be deleted.
“Updating the des-
tination
list...Please
wait.Specified
destination(s) or
sender's name has
been cleared.” appears, and operations are
not possible.
92
To cancel a job being processed,
press [Exit], and then press the {Document Server}
} key. Next, press the
{Clear/Stop}
} key. When the message
”[Stop] key was pressed.
Stop storing?” is displayed,
press [Stop].
Files can be deleted by the person
who created the file. To delete a file
which you are not authorized to delete, contact the person who created
the file.
The destination list is being Wait until the message disappears.
updated from the network Do not switch off the power while
using SmartDeviceMonitor this message is displayed.
for Admin.
Depending on the number
of destinations to be updated, there may be some delay before you can resume
operation. Operations are
not possible while this
message is displayed.
ThemisC1_EN_Copy_F_FM.book Page 93 Monday, December 27, 2004 4:10 PM
If You Cannot Make Clear Copies
If You Cannot Make Clear Copies
Problem
Causes
Solutions
Copies appear dirty.
The image density is too
dark.
Adjust the image density. See p.32
“Adjusting Copy Image Density”.
Auto Image Density is not
selected.
Select Auto Image Density. See p.32
“Adjusting Copy Image Density”.
The reverse side of an orig- The image density is too
inal image is copied.
dark.
A shadow appears on copies if you use pasted originals.
Adjust the image density. See p.32
“Adjusting Copy Image Density”.
Auto Image Density is not
selected.
Select Auto Image Density. See p.32
“Adjusting Copy Image Density”.
The image density is too
dark.
Adjust the image density. See p.32
“Adjusting Copy Image Density”.
4
Change the orientation of the original.
Put tape over pasted parts.
The same copy area is dirty
whenever making copies.
The exposure glass or ADF
is dirty.
Clean them. See “Maintaining Your
Machine” General Settings Guide.
Copies are too light.
The image density is too
light.
Adjust the image density. See p.32
“Adjusting Copy Image Density”.
The paper size is not suitable.
Use a recommended paper size.
Note
❒ A light copy may result when
you use damp or rough grain paper.
The toner cartridge is almost empty.
Add toner. See “Adding Toner”
General Settings Guide.
The original is not set correctly.
Place originals correctly. See p.13
“Placing Originals”.
An irregular paper size is
selected.
Select a proper paper size.
Copies are blank.
The original is not placed
correctly.
When using the exposure glass,
place originals face down. When using the ADF, place them face up. See
p.13 “Placing Originals”.
A moiré pattern is produced on copies.
Original has a dot pattern
image, or too many lines.
Position the original on the exposure glass at a slight angle.
Parts of the image are not
copied.
93
ThemisC1_EN_Copy_F_FM.book Page 94 Monday, December 27, 2004 4:10 PM
Troubleshooting
Problem
Causes
Solutions
If the original is aphotographic print, black spots
may appear on the copy.
High humidity causes
prints to stick to the exposure glass.
Set the print in one of the following
ways:
• With an OHP transparency
placed between the sheet and the
exposure glass.
• Placed on the exposure glass,
under two or three sheets of
white paper. Do not close the
ADF.
4
94
ThemisC1_EN_Copy_F_FM.book Page 95 Monday, December 27, 2004 4:10 PM
If You Cannot Make Copies As You Want
If You Cannot Make Copies As You Want
This section explains causes of, and remedies for, unexpected copy results.
❖ Basic
Problem
Causes
Solutions
Copies are not stapled.
There are jammed staples
in the stapler.
Remove jammed staples. See “Removing Jammed Staples”General
Settings Guide.
Note
❒ After removing jammed staples,
staples might not eject the first
few times you try to use the stapler.
Staples are wrongly positioned.
The number of copies exceeds stapler capacity.
Check the stapler capacity. See p.127
“Staple”.
Copy paper is curled.
Turn the copy paper over in the
tray.
Originals are not placed
correctly.
Check originals are placed in the
correct position. See p.46 “Staple”.
You cannot combine sever- Selected functions cannot
al functions.
be used together.
4
Check the combination of functions
and make the settings again.
See p.123 “Combination Chart”.
When sorting, the pages
are divided into two
blocks.
The memory became full in You can interrupt copying when
the middle of sorting and
memory becomes full. See p.120
the pages were delivered in “Memory Full Auto Scan Restart”.
two blocks.
Paper does not output dur- If you stop printing while
ing printing with stapling. using the staple function,
sheets not stapled during
printing may be left in the
staple unit.
} key and canPress the {Clear Modes}
cel copy settings, including stapling.
Colors changed even
though they were not selected.
If color range is set to
Adjust the color range by setting the
“Wider” and if red is select- color width. See p.120 “Adjust Color
ed, colors such as magenta Image”.
and orange may change.
Colors not selected will be
erased when using Erase
mode.
If color range is set to
Adjust the color range by setting the
“Wider” and if red is select- color width. See p.120 “Adjust Color
ed, colors such as magenta Image”.
and orange may change.
95
ThemisC1_EN_Copy_F_FM.book Page 96 Monday, December 27, 2004 4:10 PM
Troubleshooting
❖ Edit
Problem
Causes
When using the Double
Copies function, parts of
the original image are not
copied.
The original and copy pa- Select A3L for A4 K originals and
per combination is not cor- A4 for A5 originals. See p.59 “Dourect.
ble Copies”.
When using the Border,
You set a wide erased marCenter, or Center/Border
gin.
function, parts of the original image are not copied.
Originals are not scanned
correctly.
4
Solutions
Make the margin width narrower.
You can adjust it between 2-99 mm.
See “Erase Border Width” and
“Erase Center Width” in p.112 “Edit
P.1/3”.
Place originals correctly.
When using the Margin
Adjustment function, parts
of the original image are
not copied.
You set a wide erased mar- Set a narrower margin with User
gin.
Tools. You can set the width between 0–30 mm (0"–1.2"). See p.112
There is a lack of margin
“Front Margin: Left/Right”, p.113
space on the opposite side
“Front Margin: Top/Bottom”, p.112
of the binding position.
“Back Margin: Left/Right”, and
p.113 “Back Margin: Top/Bottom”.
When using the Image Repeat function, the original
image is not copied repeatedly.
You selected copy paper of
the same size as the originals, or you did not select a
proper reproduction ratio.
Select copy paper of a larger size
than the originals.
Select a proper reproduction ratio.
❖ Stamp
96
Problem
Causes
Solutions
The stamp position is
wrong.
The paper orientation is
wrong.
Check the paper orientation and
stamp position.
ThemisC1_EN_Copy_F_FM.book Page 97 Monday, December 27, 2004 4:10 PM
If You Cannot Make Copies As You Want
❖ Combine
Problem
Causes
Solutions
You cannot fold copies into
a book using the Magazine
or Booklet function.
Combine Original Magazine Format is not set correctly.
Change the setting.
When using the Combine
function, parts of the image
are not copied.
You specified a reproduction ratio that does not
match the sizes of originals
and copy paper.
When you specify a reproduction
ratio using the Manual Paper Select
function, make sure the ratio matches originals and the copy paper.
See p.116 “Orientation: Booklet,
Magazine”
Note
❒ Select the correct reproduction
ratio before using the Combine
function.
Copies are not in correct or- You placed the originals in
der.
incorrect order.
4
When placing a stack of originals in
the ADF, the last page should be on
the bottom.
If you place an original on the exposure glass, start with the first page to
be copied.
❖ Duplex
Problem
Causes
Solutions
When using Duplex, copy
is made Top/Bottom even
though Left/Right is selected.
You placed the originals in
the wrong orientation.
Place the originals in the correct orientation. See p.13 “Original Orientation”.
Copies are not in correct or- You placed the originals in
der.
incorrect order.
When placing a stack of originals in
the ADF, the first page should be on
top.
If you place an original on the exposure glass, start with the first page to
be copied.
97
ThemisC1_EN_Copy_F_FM.book Page 98 Monday, December 27, 2004 4:10 PM
Troubleshooting
When Memory Is Full
Note
❒ If you set [Memory Full Auto Scan Restart] in User Tools (see p.120 “Memory Full
Auto Scan Restart” ) to [Yes], even if memory becomes full, the memory overflow message will not be displayed. The machine will make copies of scanned
originals first, then automatically scan and copy remaining originals. When
this happens, the resulting sorted pages will not be sequential.
Message
Causes
The scanned original exceeds
Memory is full.*
originals have been the number of pages that can
be stored in memory.
scanned.
Press [Print] to
copy scanned originals. Do not remove
remaining originals.
4
Solutions
Press [Print] to print out already scanned originals and
then delete scan data.
Or, press [Clear] to simply delete scan data.
Note
❒ Copying will stop and this
message will be displayed
when the memory is full.
Press [Resume] to
scan and copy remaining originals.
[Stop] [Resume]
98
The machine checks if the remaining originals should be
copied, after the scanned original is printed.
To continue copying, remove
all copies, and then press
[Resume]. To stop copying,
press [Stop].
ThemisC1_EN_Copy_F_FM.book Page 99 Monday, December 27, 2004 4:10 PM
5. User Tools (Copier /
Document Server Features)
User Tools Menu (Copier / Document
Server Features)
User Tools Item Names
Default Settings
1
General Features P.1/5 See p.108 “General Features P. /5”.
Auto Paper Select Priority
On
Paper Display
Display
Original Type Display
Display
Original Type Priority
Full Color / Two-color: Text /
Photo
B & W/Single Color: Text / Photo
Original Photo Type Priority
Text / Photo: Printed Photo
Photo: Printed Photo
Auto Tray Switching
With Image Rotation
2
General Features P.2/5 See p.109 “General Features P. /5”.
Duplex Mode Priority
1 Sided→1 Sided (metric)
1 Sided→2 Sided (inch)
Copy Orientation in Duplex Mode
Top to Top
Original Orientation in Duplex Mode
Top to Top
Change Initial Mode
Standard
Max. Copy Quantity
100 Sheet(s)
Tone: Original remains
On
Job End Call
On
99
ThemisC1_EN_Copy_F_FM.book Page 100 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
User Tools Item Names
Default Settings
General Features P.3/5 See p.110 “General Features P.3/5”.
Copy Function Key: F1~F5
When 2 Sided is available
• F1: 1 Sided→2 Sided: T to T
• F2: 2 Sided: T to T→2 Sided: T to T
• F3: 1 Sided→1 Sided Combine
• F4: 1 Sided→1 Sided Combine:
4 originals
• F5: Create Margin
When 2 Sided is not available
• F1: 1 Sided → 1 Sided
Combine
• F2: 1 Sided → 1 Sided
Combine: 4 originals
• F3: 1 Sided → 1 Sided
Combine: 8 originals
5
• F4: Off
• F5: Create Margin
4
General Features P.4/5 See p.110 “General Features P. /5”.
Document Server Storage Key:F1~F5
• F1: 2 Sided Original Top to Top
• F2: 1 Sided→1 Sided Combine
• F3: 1 Sided→1 Sided Combine:
4 originals
• F4: 1 Sided→1 Sided Combine:
8 originals
• F5: Create Margin
5
General Features P.5/5 See p.110 “General Features P. /5”.
Clear Bypass Mode
Clear
Color Mode Priority
Black & White
Two-color Mode Priority
Red & Black
Auto Image Density Priority
Full Color / Two-color: Off
B & W / Single Color: On
Reproduction Ratio P.1/2 See p.111 “Reproduction Ratio P.1/2”.
Shortcut R/E
Metric version
•Shortcut R/E 1: 71%
•Shortcut R/E 2: 141%
•Shortcut R/E 3: 93%
Inch version
•Shortcut R/E 1: 73%
•Shortcut R/E 2: 155%
•Shortcut R/E 3: 93%
100
ThemisC1_EN_Copy_F_FM.book Page 101 Monday, December 27, 2004 4:10 PM
User Tools Menu (Copier / Document Server Features)
User Tools Item Names
Default Settings
Enlarge 1~5
Metric version
•Enlarge 1: 115%
•Enlarge 2: 122%
•Enlarge 3: 141%
•Enlarge 4: 200%
•Enlarge 5: 400%
Inch version
•Enlarge 1: 121%
•Enlarge 2: 129%
•Enlarge 3: 155%
•Enlarge 4: 200%
•Enlarge 5: 400%
Priority Setting: Enlarge
Metric version 141%
Inch version 155%
5
2
Reproduction Ratio P.2/2 See p.111 “Reproduction Ratio P. /2”.
Reduce1~6
Metric version
•Reduce1: 25%
•Reduce2: 50%
•Reduce3: 65%
•Reduce4: 71%
•Reduce5: 75%
•Reduce6: 82%
Inch version
•Reduce1: 25%
•Reduce2: 50%
•Reduce3: 65%
•Reduce4: 73%
•Reduce5: 78%
•Reduce6: 85%
Priority Setting: Reduce
Metric version: 71%
Inch version: 73%
Ratio for Create Margin
93%
R/E Priority
Reduce
101
ThemisC1_EN_Copy_F_FM.book Page 102 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
User Tools Item Names
Default Settings
Edit P.1/2 See p.112 “Edit P.1/3”.
Front Margin: Left/Right
Metric version: Left 5mm
Back Margin: Left/Right
Metric version: Right 5mm
Inch version: Left 0.2”
Inch version: Right 0.2”
Front Margin: Top/Bottom
Metric version:T/B 0mm
Inch version:T/B 0”
Back Margin: Top/Bottom
Metric version:T/B 0mm
Inch version:T/B 0”
1 Sided→2 Sided Auto Margin: TtoT
Metric version:Right 5mm
1 Sided→2 Sided Auto Margin: TtoB
Metric version:T/B 0mm
Inch version:Right 0.2”
Inch version:T/B 0”
5
Erase Border Width
Metric version: 10mm
Inch version: 0.4”
Erase Original Shadow in Combine
Yes
Erase Center Width
Metric version: 10mm
Inch version: 0.4”
2
Edit P.2/2 See p.113 “Edit P. /3”.
Front Cover Copy in Combine
Combine
Copy Order in Combine
From Left to Right
Copy on Designating Paper
Yes
Copy on Designating Page in Combine
Combine
Orientation: Booklet, Magazine
Open to Left
Edit P.3/3 See p.114 “Edit P.3/3”.
Image Repeat Separation Line
None
Double Copies Separation Line
None
Separation Line in Combine
None
Stamp See p.116 “Stamp”.
Background Numbering
102
Size
Normal
Density
Normal
Stamp Color
Black
ThemisC1_EN_Copy_F_FM.book Page 103 Monday, December 27, 2004 4:10 PM
User Tools Menu (Copier / Document Server Features)
User Tools Item Names
Preset Stamp
Default Settings
Stamp Priority
COPY
Stamp Language
English
Stamp Position
Metric version
• Position: Top Right
• Top Margin: 24mm
• Right Margin: 24mm
Inch version
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
Stamp Format:
Size: 1 X
Density: Normal
Page to Stamp: All Pages
Stamp Color:
User Stamp
5
Black
Program / Delete Stamp
Stamp Position: 1~4
Metric version
• Position: Top Right
• Top Margin: 24mm
• Right Margin: 24mm
Inch version
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
Stamp Format: 1~4
All Pages
Stamp Color: 1~4
Black
103
ThemisC1_EN_Copy_F_FM.book Page 104 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
User Tools Item Names
Date Stamp
Default Settings
Format
Metric version:
DD / MM / YYYY
Inch version:
MM / DD / YYYY
Font
Stamp Position
Font 1
Metric version
• Position: Top Left
• Top Margin: 8mm
• Right Margin: 32mm
Inch version
• Position: Top Left
• Top Margin: 0.3"
• Right Margin: 0.8"
5
104
Stamp Setting
All Pages
Size
Auto
Superimpose
No
Stamp Color
Black
ThemisC1_EN_Copy_F_FM.book Page 105 Monday, December 27, 2004 4:10 PM
User Tools Menu (Copier / Document Server Features)
User Tools Item Names
Page Numbering
Default Settings
Stamp Format
P1, P2...
Font
Font 1
Size
Auto
Duplex Back Page Stamping
Position
Opposite Position
Page Numbering in Combine Per Original
Stamp on Designated Slip Sheet No
Stamp Position:
Metric version
• Position
P1, 1/5, P.1, 1: Top Right
-1-, 1-1: Bottom Center
• Top/Bottom Margin
P1, 1/5, P.1, 1: 12mm
-1-, 1-1: 8mm
5
• Left/Right Margin
P1, 1/5, P.1, 1: 12mm
-1-, 1-1: 0mm
Inch version
• Position
P1, 1/5, P.1, 1: Top Right
-1-, 1-1: Bottom Center
• Top/Bottom Margin
P1, 1/5, P.1, 1: 0.5"
-1-, 1-1: 0.3"
• Left/Right Margin
P1, 1/5, P.1, 1: 0.5"
-1-, 1-1: 0.0"
Superimpose
No
Stamp Color
Black
Input/Output See p.119 “Input/Output”.
Switch to Batch
Batch
SADF Auto Reset
5 seconds
Rotate Sort: Auto Paper Continue
No
Auto Sort
No
Memory Full Auto Scan Restart
No
Select Stack Function
Stack
Letterhead Setting
No
105
ThemisC1_EN_Copy_F_FM.book Page 106 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
User Tools Item Names
Default Settings
Adjust Color Image See p.120 “Adjust Color Image”.
Background Density of ADS(Full Color / Two-color)
Center of the 5 level adjustment
Color Sensitivity
Center of the 5 level adjustment
A.C.S. Sensitivity
Center of the 5 level adjustment
A.C.S. Priority
Full Color
Administrator Tools See p.121 “Administrator Tools”.
Menu Protect
5
106
Level 2
ThemisC1_EN_Copy_F_FM.book Page 107 Monday, December 27, 2004 4:10 PM
Accessing User Tools (Copier / Document Server Features)
Accessing User Tools (Copier / Document
Server Features)
This section is for key operators in
charge of this machine. With User
Tools can change the machine's default settings.
Note
❒ Be sure to exit User Tools and return to the initial copy display after all settings are finished. This
section describes system settings
you can set for the copier function.
❒ The selected key is highlighted.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes}
} key is pressed.
Reference
For details, see “Changing Default
Settings” in “User Tools (System
Settings)”, General Settings Guide.
C Select the menu you want to set.
The setting display for each menu
is displayed.
Reference
See p.99 “User Tools Menu
(Copier / Document Server Features)”.
D Change settings by following the
instructions on the display panel,
and then press [OK].
5
Exiting User Tools
A After
changing default settings,
press [Exit] on the User Tools main
menu.
Changes to User Tools are complete, and the machine is ready to
copy.
Changing Default Settings
A Press the {User Tools/Counter}} key.
The User Tools main menu appears.
ZFLS110N
B Press [Copier / Document Server Features].
The Copier / Document Server
Features menu is displayed.
Note
❒ You can also exit User Tools by
pressing the { User Tools/Counter}
} key.
107
ThemisC1_EN_Copy_F_FM.book Page 108 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
Settings You Can Change with User Tools
General Features P.1/5
❒ If you select [Hide], the display is
as below.
❖ Auto Paper Select Priority
Auto Paper Select is the default
setting. You can cancel this setting.
See p.34 “Selecting Copy Paper”.
Note
❒ Default: On
❖ Paper Display
You can choose to have the available paper trays and sizes shown on
the initial display.
5
Note
❒ Default: Display
❒ If you select [Hide], the display is
shown as below. Press [Auto Paper Select] to display paper sizes.
❖ Original Type Priority
You can select the original type effective when the power is turned
on, or modes cleared. See p.33 “Selecting the Original Type”.
Note
❒ Default: Full Color/Two-Color:
Text / Photo, B&W/Single Color:
Text / Photo
❖ Original Photo Type Priority
When you select “Text / Photo” or
“Photo” in “Original Type Priority”, you can change the settings of
the selected original type.
❖ Original Type Display
You can have the original types
shown on the initial display.
Note
❒ Default: Display
Note
❒ Default: Text / Photo: Printed
Photo, Photo: Printed Photo
❖ Auto Tray Switching
If you load paper of the same size
in two or more trays, the machine
automatically shifts to the other
when the first tray runs out of paper (when Auto Paper Select is selected.) This function is called
“Auto Tray Switching”. This setting specifies whether to use Auto
Tray Switching or not.
Note
❒ Default: With Image Rotation
108
ThemisC1_EN_Copy_F_FM.book Page 109 Monday, December 27, 2004 4:10 PM
Settings You Can Change with User Tools
❒ [With Image Rotation] Use to copy
w he n usin g th e Au to T ray
Switching function.
❒ [Without Image Rotation] Only
copies with Auto Tray Switching if you load paper of the
same size and in the same orientation in two or more trays. If
the paper is not the same size or
in the same orientation, copying
is interrupted and the message
“Load paper.” is displayed.
❒ [Off] When a paper tray runs out
of paper, copying is interrupted
and the message “ Load paper.” is displayed.
General Features P.2/5
❖ Duplex Mode Priority
You can select the type of the Duplex function effective when the
power is turned on, or modes are
cleared.
Note
❒ Default:
• Metric version: 1 Sided→1 Sided
• Inch version: 1 Sided→2 Sided
❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effective when power is turned on, or
modes are cleared.
Note
❒ Default: Standard
❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 100.
Note
❒ Default: 100 Sheet(s)
❖ Tone: Original remains
The beeper (key tone) sounds if
you forget to remove originals after copying.
5
Note
❒ Default: On
❒ If Panel Tone in User Tools (System Settings) is [Off], the beeper
does not sound, whatever the
Tone: Original remains setting.
See “Panel Tone” in “General
Features”, Genera l S ettings
Guide.
❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ Default: On
❒ If Panel Tone of User Tools (System Settings) settings is [On], the
machine beeps to notify you
that it did not complete a job for
reasons such as: the paper tray
ran out of paper, or a paper jam
occurred.
109
ThemisC1_EN_Copy_F_FM.book Page 110 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
General Features P.3/5
❖ Copy Function Key: F1-F5
You can assign frequently used
functions to function keys F1 to F5.
Note
❒ Default:
• Copy Function Key: F1: 1
Sided→2 Sided: T to T
• Copy Function Key: F2: 2 Sided: T to T→2 Sided: T to T
• Copy Function Key: F3: 1
Sided→1 Sided Combine
• Copy Function Key: F4: 1
Sided → 1 Sided Combine: 4
originals
• Copy Function Key: F5: Create Margin
5
General Features P.4/5
❖ Document Server Storage Key: F1–F5
You can assign frequently used
functions to function keys F1 to F5.
You can also change assigned
functions.
Note
❒ Default:
• Document Server Storage Key:
F1: 2 Sided Original Top to Top
• Document Server Storage Key:
F2: 1 Sided→1 Sided Combine
• Document Server Storage Key:
F3: 1 Sided→1 Sided Combine:
4 originals
• Document Server Storage Key:
F4: 1 Sided→1 Sided Combine:
8 originals
• Document Server Storage Key:
F5: Create Margin
General Features P.5/5
❖ Clear Bypass Mode
You can set whether to “Clear” or
“Do not Clear” bypass tray settings when the machine is turned
on, reset, or modes are cleared.
Note
❒ Default: Clear
❖ Color Mode Priority
You can select to prioritize “Auto
Color Select”, “Full Color”, or
“Black & White” when the machine is turned on, reset, or modes
are cleared.
Note
❒ Default: Black & White
❖ Two-color Mode Priority
You can set whether to prioritize
“Red & Black” or “Two-color” in
Two-color mode.
Note
❒ Default: Red & Black
110
ThemisC1_EN_Copy_F_FM.book Page 111 Monday, December 27, 2004 4:10 PM
Settings You Can Change with User Tools
❖ Auto Image Density Priority
You can set whether Auto Image
Density is “On” or “Off” when the
machine is turned on, reset, or
modes are cleared.
Note
❒ Default: Full Color/Two-color:
Off, B&W/Single Color: On
❒ When using the Auto Color Select function, the settings of Full
Color/Two-color will be effective.
Reproduction Ratio P.1/2
❖ Shortcut R / E
You can register up to three frequently used Reduce/Enlarge ratios other than the fixed
Reduce/Enlarge ratio and have
them shown on the initial display.
You can also change registered Reduce/Enlarge ratios.
If no Reduce/Enlarge ratio has
been set when selecting [Shortcut R
/ E 1], [Shortcut R / E 2], or [Shortcut R
/ E 3], enter the ratio using the
number keys.
❖ Enlarge 1-5
You can customize available enlargement ratios by pressing [Red u c e / E n l a r g e ] , f o l lo w e d b y
[Enlarge].
Note
❒ Default:
• Metric version:
• Enlarge 1: 115%
• Enlarge 2: 122%
• Enlarge 3: 141%
• Enlarge 4: 200%
• Enlarge 5: 400%
• Inch version:
• Enlarge 1: 121%
• Enlarge 2: 129%
• Enlarge 3: 155%
• Enlarge 4: 200%
• Enlarge 5: 400%
❒ When selecting [User Enlrg. Ratio], enter a ratio using the
number keys (in the range of
101 to 400%).
5
❖ Priority Setting: Enlarge
You can set the ratio with priority
when [Reduce / Enlarge] is pressed,
followed by [Enlarge].
Note
❒ Default:
• Metric version: 141%
• Inch version: 155%
Reproduction Ratio P.2/2
❖ Reduce 1-6
You can customize available reduction ratios by pressing [Reduce /
Enlarge], followed by [Reduce].
111
ThemisC1_EN_Copy_F_FM.book Page 112 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
Note
❒ Default:
• Metric version:
• Reduce 1: 25%
• Reduce 2: 50%
• Reduce 3: 65%
• Reduce 4: 71%
• Reduce 5: 75%
• Reduce 6: 82%
• Inch version:
• Reduce 1: 25%
• Reduce 2: 50%
• Reduce 3: 65%
• Reduce 4: 73%
• Reduce 5: 78%
• Reduce 6: 85%
❒ When selecting [User Redc.Ratio], enter a ratio using the
number keys (in the range of 25
to 99%).
5
❖ Priority Setting: Reduce
You can set the ratio with priority
when [Reduce / Enlarge] is pressed,
followed by [Reduce].
Note
❒ Default:
• Metric version: 71%
• Inch version: 73%
❖ Ratio for Create Margin
You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.
Note
❒ Default: 93%
❖ R/E Priority
Specifies which tab has priority on
the display panel when [Reduce /
Enlarge] is pressed.
112
Note
❒ Default: Reduce
Edit P.1/3
Note
❒ Enter the width of the binding
margin using the number keys, as
follows:
• Metric version: 0–30 mm (1 mm
increments)
• Inch version: 0"–1.2" (0.1 in increments)
❒ Enter the width of the erased margin using the number keys as follows:
• Metric version: 2–99 mm (1 mm
increments)
• Inch version: 0.1"–3.9" (0.1 in increments)
❖ Front Margin: Left/Right
You can specify left and right margins on the front side of copies using the Margin Adjustment
function.
Note
❒ Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2"
❖ Back Margin: Left/Right
You can specify left and right margins on the back side of copies using the Margin Adjustment
function.
Note
❒ Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
ThemisC1_EN_Copy_F_FM.book Page 113 Monday, December 27, 2004 4:10 PM
Settings You Can Change with User Tools
❖ Front Margin: Top/Bottom
You can specify top and bottom
margins on the front side of copies
using the Margin Adjustment
function.
Note
❒ Default:
• Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖ Back Margin: Top/Bottom
You can specify top and bottom
margins on the back side of copies
using the Margin Adjustment
function.
Note
❒ Default:
• Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖ 1 Sided→
→2 Sided Auto Margin: TtoT
When using the 1 sided → 2 sided
Duplex function, you can specify
margins on the back side.
The margin is set to the same value
as “Back Margin: Left/Right”.
Note
❒ Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
❖ 1 Sided→
→2 Sided Auto Margin: TtoB
When using the 1 sided → 2 sided
Duplex function, you can specify
margins on the back side. The margin is set to the same value as
“Back Margin: Top/Bottom”.
Note
❒ Default:
• Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖ Erase Border Width
You can specify the width of
erased border margins using this
function.
Note
❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
❖ Erase Original Shadow in Combine
In Combine Copy or Magazine
C o p y m o d e , y o u c a n s p ec i f y
whether to erase a 3mm, 0.1"
bounding margin around all four
edges of each original.
Note
❒ Default: Yes
5
❖ Erase Center Width
You can specify the width of the
erased center margins using this
function.
Note
❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
Edit P.2/3
Note
❒ An image of approximately 1.5
mm (0.06”) will not be displayed as
the width of the separation line,
when specifying solid or broken
lines.
❖ Front Cover Copy in Combine
You can make a combined copy on
the front cover sheet when you select the Front Cover function.
GCST019E
113
ThemisC1_EN_Copy_F_FM.book Page 114 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
Note
❒ Default: Combine
Edit P.3/3
❖ Copy Order in Combine
You can set the copy order when
using the Combine function to Left
to Right or Top to Bottom.
❖ Image Repeat Separation Line
You can select a separation line
and color using the Image Repeat
function from: None, Solid, Broken
A, Broken B, or Crop Marks.
• None
• Solid
5
• Broken A
GCAH090E
Note
❒ Default: From Left to Right
❖ Copy on Designating Paper
You can make a combined copy on
a designated paper.
• Broken B
• Crop Marks
Note
❒ Default: Combine
❖ Copy on Designating Page in Combine
You can make a combined copy on
a designated paper.
Note
❒ Default: Combine
❖ Orientation: Booklet, Magazine
You can select the orientation of
copies to open when using Magazine or Booklet function.
Note
❒ Default: Open to Left
Reference
p.57 “How to fold and unfold
copies to make a magazine”
114
Note
❒ Default: None
❒ Line color (Full Color): Yellow,
Red, Cyan, Magenta, Green,
Blue, Black
❒ Separation lines cannot be specified when using [None].
❒ In “Black and White”, printing
will be done in black; in “Single
Color”, printing will be done in
the specified color; in “TwoColor” (standard), printing will
be done in the specified color of
the black area; and in “TwoColor” (Red and Black), printing will be done in black.
ThemisC1_EN_Copy_F_FM.book Page 115 Monday, December 27, 2004 4:10 PM
Settings You Can Change with User Tools
❒ An image of approximately
1.5mm will not be displayed as
the width of the separation line,
when specifying solid or broken
lines.
❖ Double Copies Separation Line
You can select a separation line using the Double Copies function
from: None, Solid, Broken A, Broken B, or Crop Marks.
• None
• Solid
• Broken A
❒ In “Black and White”, printing
will be done in black; in “Single
Color”, printing will be done in
the specified color; in “TwoColor” (standard), printing will
be done in the specified color of
the black area; and in “TwoColor” (Red and Black), printing will be done in black.
❒ Images of approximately 1.5mm
will not be displayed as the
width of the separation line
when solid or broken lines have
been specified.
❖ Separation Line in Combine
You can select a separation line using the Combine function from:
None, Solid, Broken A, Broken B,
or Crop Marks. See p.51 “1 Sided
Combine” and p.52 “2 Sided Combine”.
• None
5
• Broken B
• Solid
• Crop Marks
• Broken A
Note
❒ Default: None
❒ Line color (Full Color): Yellow,
Red, Cyan, Magenta, Green,
Blue, Black
❒ Separation lines cannot be specified when using [None].
• Broken B
• Crop Marks
115
ThemisC1_EN_Copy_F_FM.book Page 116 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
Note
❒ Default: None
❒ Line color (Full Color): Yellow,
Red, Cyan, Magenta, Green,
Blue, Black
❒ Separation lines cannot be specified when using [None].
❒ In “Black and White”, printing
will be done in black; in “Single
Color”, printing will be done in
the specified color; in “TwoColor” (standard), printing will
be done in the specified color of
the black area; and in “TwoColor” (Red and Black), printing will be done in black.
❒ Images of approximately 1.5mm
will not be displayed as the
width of the separation line
when solid or broken lines have
been specified.
Copy on Designating Page in
Combine You can make a combined copy on a designated paper.
5
Note
❒ Default: Combine
❖ Orientation: Booklet, Magazine
You can select the orientation of
copies to open when using Magazine or Booklet function.
Note
❒ Default: Open to Left
Reference
p.57 “How to fold and unfold
copies to make a magazine”
Stamp
Background Numbering
❖ Stamp Priority
You can set the size of the numbers.
Note
❒ Default: Normal
❖ Density
You can set the density of the numbers.
Note
❒ Default: Normal
❖ Stamp Color
You can set the color of the numbers.
Note
❒ Default: Black
Preset Stamp P.1/4-4/4
❖ Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is
pressed. See p.66 “Preset Stamp”.
Note
❒ Default: COPY
❖ Stamp Language
You can select the language of the
stamp.
Note
❒ Default: English
❖ Stamp Position
You can set the position where the
stamp is printed.
Press the arrow keys to adjust the
position.
116
ThemisC1_EN_Copy_F_FM.book Page 117 Monday, December 27, 2004 4:10 PM
Settings You Can Change with User Tools
Note
❒ Default:
• Metric Version:
• Position: Top Right
• Top Margin: 24 mm
• Right Margin: 24 mm
• Inch Version:
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
❖ Stamp Format
You can adjust the stamp's size,
density, and print page.
• Size
You can set the size of the
stamp.
Note
❒ Default: 1X
• Density
You can set the pattern used to
print the stamp.
Note
❒ Default: Normal
❒ Normal: The stamp is printed on the image. You cannot
check which parts will overlap.
❒ Lighter: The image can be
seen through the stamp.
❒ Lightest: The image appears
ev en c le are r t ha n in t he
Lighter setting.
• Page to Stamp
You can have the stamp printed
on the first page or all pages.
Note
❒ Default: All Pages
❖ Stamp Color
Sets the stamp print color.
Note
❒ Default: Black
User Stamp P.1/2-2/2
❖ Program / Delete Stamp
You can register, change, or delete
these user stamp designs.
Note
❒ You can register up to four custom stamps with your favourite
designs. See p.68 “To program
the user stamp”.
Reference
For how to delete the user
stamp, see p.69 “To delete the
user stamp”.
5
❖ Stamp Position 1 - 4
You can set the position where the
stamp is printed.
Press the arrow keys to adjust the
position.
Note
❒ Default:
• Metric version:
• Position: Top Right
• Top Margin: 24 mm
• Right Margin: 24 mm
• Inch version:
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
❖ Stamp Format 1 - 4
You can adjust the print page for
User Stamps 1 to 4 already registered.
• Page to Stamp
Sets whether to print the stamp
on all pages or only the first
page.
117
ThemisC1_EN_Copy_F_FM.book Page 118 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
Note
❒ Default: All Pages
❖ Stamp Color: 1 - 4
Sets the color registered in User
Stamp color (1 to 4).
Note
❒ Default: Black
Date Stamp
❖ Format
You can select the date format for
the Date Stamp function.
Note
❒ Default:
• Metric version: DD / MM / YYYY
• Inch version: MM / DD / YYYY
5
❖ Font
You can select the Date Stamp font.
Note
❒ Default: Font 1
❒ This setting is linked to the Page
Numbering function.
❖ Stamp Position
You can set the position where the
stamp is printed.
Press the arrow keys to adjust the
position.
Note
❒ Default:
• Metric version:
• Position: Top Left
• Top Margin: 8 mm
• Left Margin: 32 mm
• Inch version:
• Position: Top Left
• Top Margin: 0.3"
• Left Margin: 0.8"
118
❖ Stamp Setting
You can have the date printed on
the first page or all pages.
Note
❒ Default: All Pages
❖ Size
You can set the Date Stamp size.
Note
❒ Default: Auto
❖ Superimpose
You can have the Date Stamp
printed in white where it overlaps
black parts of the image.
Note
❒ Default: No
❖ Stamp Color
You can set the selected priority
color when printing the date.
Note
❒ Default: Black
Page Numbering P.1/3-2/3
❖ Stamp Format
You can select the page number
format given priority when [Page
Numbering] is pressed.
Note
❒ Default: P1, P2
❖ Font
You can select the page number
font.
Note
❒ Default: Font 1
❖ Size
You can set the size of the page
number.
ThemisC1_EN_Copy_F_FM.book Page 119 Monday, December 27, 2004 4:10 PM
Settings You Can Change with User Tools
Note
❒ Default: Auto
❖ Duplex Back Page Stamping Position
You can set the position of the duplex back page number printed using the Duplex function.
Note
❒ Default: Opposite Position
❖ Page Numbering in Combine
You can set page numbering when
using t he Co mb in e and Page
Numbering function together.
Note
❒ Default: Per Original
❖ Stamp on Designated Slip Sheet
You can print the page number on
slip sheets when you use the Designate function set to "Copy" and
Page Numbering function together.
❖ Stamp Position
P1, P2... Stamp Position: 1/5, 2/5...
Stamp Position: –1–, –2–... Stamp
Position: P.1, P.2. Stamp Position:
1, 2... Stamp Position: 1–1, 1–2...
You can set the position where the
stamp is printed.
Press the arrow keys to adjust the
position.
❖ Superimpose
You can have page numbers printed in white where they overlap
black parts of the image.
Note
❒ Default: No
❖ Stamp Color
You can set the selected priority
color when printing the date.
Input/Output
❖ Switch to Batch (SADF)
You can select to have the Batch or
SADF function displayed when
you press [Special Original]. See p.15
“Batch”.
Note
❒ Default: Batch
❖ SADF Auto Reset
In SADF mode, an original must be
set within a specific time after the
previous original has been fed.
You can adjust this time from 3 seconds to 99 in 1 second increments.
5
Note
❒ Default: 5 seconds
❖ Rotate Sort: Auto Paper Continue
You can continue copying when
paper of the required orientation
has run out during rotate-sorting.
See p.42 “Rotate Sort”.
Note
❒ If you select [No] :
• When paper of the required
orientation runs out, the machine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.
❒ If you select [Yes] :
• Copying continues using copy
paper of a different orientation. The copy job will finish
even if the machine is left unattended.
❒ Default: No
Note
❒ Default: Black
119
ThemisC1_EN_Copy_F_FM.book Page 120 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
❖ Auto Sort
You can specify whether the Sort
function is to be selected when the
machine is turned on, or when the
functions are cleared.
Note
❒ Default: No
❖ Memory Full Auto Scan Restart
If memory becomes full while
scanning originals, the machine
will copy the scanned originals
first, and then automatically proceed scanning remaining originals.
You can enable or disable this
function.
5
Note
❒ If you select [No] :
• When memory becomes full,
the machine stops operation,
allowing you to remove the
copies on the output tray.
❒ If you select [Yes] :
• You can leave the machine
unattended to make copies,
but sorted pages will not be
sequential.
❒ Default: No
❖ Select Stack Function
Specify whether Stack or Rotate
Sort has priority on the initial display.
Note
❒ Default: Stack
❒ A 500-Sheet finisher or 1000Sheet finisher is required to use
this function.
❖ Letterhead Setting
If you select [Yes] for this function,
the machine rotates images correctly.
120
Note
❒ Default: No
❒ Orientation-fixed (top to bottom) or two-sided paper might
not print correctly depending
on how the originals and paper
are placed.
Reference
When using letterhead paper,
pay attention to the paper orientation. See “Orientation–Fixed
Paper or Two-Sided Paper” in
“Loading Paper”, General Settings Guide.
Adjust Color Image
❖ Background Density of ADS (Full Color /
Two-color)
The background density is adjusted to skip the texture and copy.
You can adjust the background
density up to 5 levels when in Full
Color or Two-color.
Note
❒ Default: Center of the 5 level adjustment
❖ Color Sensitivity
You can adjust the tone of red in
“Two color (Red & Black)”, the
color specified to convert in “Color
Convert” and the color specified
for “Erase Color”, in 5 levels.
Note
❒ Default: Center of the 5 level adjustment
❒ When the color width has been
set to “Wider”, and the color to
be deleted, for example is red,
all the colors that are close to
magenta and orange are deleted. If it's set to “Narrower” the
color red will be deleted.
ThemisC1_EN_Copy_F_FM.book Page 121 Monday, December 27, 2004 4:10 PM
Settings You Can Change with User Tools
❖ A.C.S. Sensitivity
This 5-step setting determines the
level of the standard used for discriminating between black & white
originals and full color originals
when “Auto Color Select” is selected.
Note
❒ Default: Center of the 5 level adjustment
❖ A.C.S. Priority
This setting determines the copy
priority between “Black & White”
and “Full Color” when “Auto
Color Select” is selected.
5
Note
❒ Default: Full Color
Administrator Tools
❖ Menu Protect
You can prevent unauthenticated
users from changing the user tools
settings.
For details, consult the administrator.
121
ThemisC1_EN_Copy_F_FM.book Page 122 Monday, December 27, 2004 4:10 PM
User Tools (Copier / Document Server Features)
5
122
ThemisC1_EN_Copy_F_FM.book Page 123 Monday, December 27, 2004 4:10 PM
6. Specifications
Combination Chart
The combination chart below shows which functions can be used together. The
following tables explains the symbols used in the chart.
means that these functions can be used together.
$
means that these functions cannot be used together. The second
function selected will be the function you are working in.
×
means that these functions cannot be used together. The first function selected will be the function you are working in.
AFT028S
*1
*2
*3
Combination is not available when the copied content is 2 sided.
Combination with covers is not possible with 2 Sided 1 Sided.
Combination with magazine is available.
Combination with booklet is not possible.
123
ThemisC1_EN_Copy_F_FM.book Page 124 Monday, December 27, 2004 4:10 PM
Specifications
Supplementary Specifications
❖ Mixed Size mode
• Since small originals may not be correctly aligned with the original guide,
the copy image may be slanted.
• Copying speed and scanning speed will be reduced.
• You can place originals of two different sizes at a time.
❖ Bypass Tray Copy
• The following paper sizes can be selected as the standard sizes:
A3L, A4KL, A5KL, A6L, B4 JISL, B5 JISKL, B6 JISL, 11"×17"L,
81/2"×14"L, 81/2"×11"KL, 51/2"×81/2"KL, 71/4"×101/2"KL, 8"×13"L,
8 1/ 2"×13"L, 8 1/ 4"×13"L, 12"×18"L, 8KL, 16KKL, 3 7/ 8"×7 1/ 2"K,
41/8"×91/2"K,C5 EnvK, C6 EnvK, DL EnvK
• When the beeper is turned off, it will not sound when you insert paper into
the bypass tray. See “Panel Tone”General Settings Guide.
❖ Preset Enlarge/Reduce
• You can select one of 12 preset ratios (5 enlargement ratios, 7 reduction ratios).
• You can select a ratio regardless of the size of an original or copy paper.
With some ratios, parts of the image might not be copied or margins will
be displayed on copies.
• Copies can be reduced or enlarged as follows:
6
❖ Metric version
Ratio (%)
Original → Copy paper size
400 (enlarge area by 16)
--
200 (enlarge area by 4)
A5→A3
141 (enlarge area by 2)
A4→A3, A5→A4
122
F→A3, A4→B4 JIS
115
B4 JIS→A3
93
--
82
F→A4, B4 JIS→A4
75
B4 JIS→F4, B4 JIS→F
71 (reduce area by /2)
A3→A4, A4→A5
65
A3→F
1
50 (reduce area by /4)
A3→A5, F→A5
25
--
1
124
ThemisC1_EN_Copy_F_FM.book Page 125 Monday, December 27, 2004 4:10 PM
Supplementary Specifications
❖ Inch version
Ratio (%)
Original → Copy paper size
400 (enlarge area by 16)
--
200 (enlarge area by 4)
51/2" × 81/2"→11" × 17"
155 (enlarge area by 2)
51/2" × 81/2"→81/2" × 14"
129
81/2" × 11"→11" × 17"
121
81/2" × 14"→11" × 17"
93
--
85
F→81/2" × 11"
78
81/2" × 14"→81/2" × 11"
73
11" × 15"→81/2" × 11"
65
11" × 17"→81/2" × 11"
50 (reduce area by 1/4)
11" × 17"→51/2" × 81/2"
25
--
6
❖ Zoom
• The reproduction ratios you can specify are 25–400%.
• You can select a ratio regardless of the size of an original or copy paper.
With some ratios, parts of the image might not be copied or margins will
be displayed on copies.
❖ Size Magnification
• If the calculated ratio is over the maximum or under the minimum ratio, it
is automatically adjusted to within available range. However, with some
ratios, parts of the image might not be copied or margins will be displayed
on copies.
• The reproduction ratios you can specify are 25–400%.
❖ Directional Size Magnification
• The reproduction ratio you can specify are 25–400%.
• When entering a percentage ratio, you can specify any value in the permitted range, regardless of original or copy paper size. However, depending
on settings and other conditions, part of the image may not be copied, or
margins will be displayed on copies.
• When entering a size in millimeters or inches, and the calculated ratio is
over the maximum or under the minimum ratio, it will be automatically
adjusted to within available range. However, with some ratios, parts of the
image might not be copied or margins will be displayed on copies.
125
ThemisC1_EN_Copy_F_FM.book Page 126 Monday, December 27, 2004 4:10 PM
Specifications
Paper size and orientation
❖ Sort, Rotate Sort, Stack
• Paper sizes and orientations that can be used in the Shift Sort and Stack
functions are as follows:
500-Sheet finisher
1000-Sheet finisher
A3L, B4 JISL, A4KL, B5 JISK,
11" × 17"L, 81/2" × 14"L,
71/4" ×101/2"L, 81/2" × 13"L,
81/2" × 11"KL, 8KL, 16KK
A3L, B4 JISL, A4KL, B5 JISKL,
A5KL, 51/2" × 81/2"KL, 11" × 17"L,
81/2" × 14"L, 81/4" × 13"L, 8" × 13"L,
81/2" × 13"L, 81/2" × 11"KL,
71/4" × 101/2"KL, 12" × 18"L, 8KL,
16KKL
• The number of copies that can be placed on the tray is as follows. When the
number of copies exceeds capacity, remove copies from the tray.
Shift sort tray
Internal tray 2 (1 bin tray) Internal tray
6
126
Paper Size and Direction
Paper Capacity and
Weight
A4KL, B5 JISKL, A5KL, B6 JISL, A6L, 81/2" × 11"KL,
71/4" × 101/2"KL, 51/2" × 81/2"KL, 16KKL
500 sheets
*1
(80g/m2)
(20 lb.)
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L, 8" × 13"L, 81/2" × 13"L,
81/4" × 13"L, 12" × 18"L, 8KL
250 sheets
(80g/m2)
(20 lb.)
37/8" × 71/2"K, 41/8" × 91/2"K, C5 EnvK, C6 EnvK, DL EnvK
–
*2
125 sheets
A3L, B4 JISL, A4KL, B5 JISKL, A5KL, B6 JISL, A6L,
(80g/m2)
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL, 71/4" × 101/2"KL,
1
1
1
1
(20
lb.)
5 /2" × 8 /2"L, 8" × 13"L, 8 /2" × 13"L, 8 /4" × 13"L, 8KL, 16KKL
37/8" × 71/2"K, 41/8" × 91/2"K, C5 EnvK, C6 EnvK, DL EnvK
—
A4KL, B5 JISKL, A5KL, B6 JISL, A6L, 81/2" × 11"KL,
71/4" × 101/2"KL, 51/2" × 81/2"KL, 16KKL
250 sheets
(80g/m2)
(20 lb.)
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L, 8" × 13"L, 81/2" × 13"L,
81/4" × 13"L, 12" × 18"L, 8KL
125 sheets
(80g/m2)
(20 lb.)
ThemisC1_EN_Copy_F_FM.book Page 127 Monday, December 27, 2004 4:10 PM
500-Sheet Finisher
Supplementary Specifications
Paper Size and Direction
Paper Capacity and
Weight
A4KL, B5 JISKL *3 , A5K *3 , 81/2" × 11"KL, 51/2" × 81/2"K *3 ,
71/4" × 101/2"KL *3 , 16KKL *3
500 sheets
(80g/m2)
(20 lb.)
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L, 8" × 13"L, 81/4" × 13"L,
81/2" × 13"L, 8KL
250 sheets
(80g/m2)
(20 lb.)
Finisher proof tray
250 sheets
(80g/m2)
(20 lb.)
1000-Sheet Finisher
A4KL, B5 JISKL, A5KL, B6 JISL, A6L, 81/2" × 11"KL,
71/4" × 101/2"KL, 51/2" × 81/2"KL, 16KKL
*1
*2
*3
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L, 8" × 13"L, 81/2" × 13"L,
81/4" × 13"L, 12" × 18"L, 8KL
50 sheets
(80g/m2)
(20 lb.)
Finisher shift tray
1000 sheets
(80g/m2)
(20 lb.)
A4KL, B5 JISKL, A5KL, 81/2" × 11"KL, 71/4" × 101/2"KL,
51/2" × 81/2"KL, 16KKL
A3L, B4 JISL, 12" × 18"L, 11" × 17"L, 81/2" × 14"L, 8" × 13"L,
81/2" × 13"L, 81/4" × 13"L, 8KL
500 sheets
(80g/m2)
(20 lb.)
6
250 sheets when the optional bridge unit is installed.
125 sheets when the optional bridge unit is installed.
B5 JISKL, A5K, 51/2" × 81/2"K, 71/4" × 101/2"KL, 16KKL cannot be shifted.
Note
❒ When using the Rotate Sort or Staple functions, the capacity may be reduced.
❒ When using the Duplex and the Rotate Sort functions combined, copying
speed may be reduced.
❖ Staple
• The following types of paper cannot be stapled:
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Thick paper
• Curled paper
• Paper of low stiffness
• Paper of mixed sizes
• In the following cases, copies will be delivered to the shift tray without stapling:
• When the number of sheets for one set is over stapler capacity
• When memory reaches 0% during copying
127
ThemisC1_EN_Copy_F_FM.book Page 128 Monday, December 27, 2004 4:10 PM
Specifications
• When using Double Copies, or [1 Sided→
→1 Sided], [1 Sided→
→2 Sided], [2
Sided→
→1 Sided], or [2 Sided→
→2 Sided] in Combine mode, select K paper for
L original and L paper for K original.
• When using Double Copies, or [1 Sided 2 Pages→ 1 Sided Combine] and
[1 Sided 4 Pages→ 2 Sided Combine] in Combine mode, select K paper for
L original and L paper for K original.
• When using [Left 2] or [Top 2] with Double Copies, or [1 Sided→
→1 Sided], [1
Sided→
→2 Sided], [2 Sided→
→1 Sided], or [2 Sided→
→2 Sided] in Combine mode,
select K paper for L original and L paper for K original.
• When the finisher is installed, even if you place different size originals in
the ADF, appropriate size of copy paper can be automatically selected and
stapled using the Mixed Size mode and Auto Paper Select function. Load
the paper you want to use in the paper trays beforehand. Paper sizes that
can be stapled when using the Mixed Size mode are as follows:
• A3L and A4K
• B4 JISL and B5 JISK
• 11" × 17"L and 81/2" × 11"K
• Paper sizes and orientation that can be used in the Staple function and the
stapler capacity are as follows:
6
Paper size
Stapler capacity
500-Sheet Finisher
A3L, B4 JISL, A4KL, B5 JISK,
11" × 17"L, 81/2" × 14"L,
81/2" × 13"L, 81/2" × 11"KL,
8KL, 16KK
30 sheets (80g/m2)
1000-Sheet Finisher
A3L, B4 JISL, 12" × 18"L,
11" × 17"L, 81/2" × 14"L,
81/2" × 13"L, 81/4" × 13"L,
8" × 13"L, 8KL
30 sheets (80g/m2)
A4KL, B5 JISKL,
81/2" × 11"KL,
71/4" × 101/2"KL, 16KKL
50 sheets (80g/m2)
• When the original image is rotated, the staple orientation changes by 90°.
• The maximum original image size that can be rotated is as follows.
Metric version
A4
Inch version
81/2" × 11"
When "Left 2" or "Top 2" is selected, the following settings are useful to rotate
images appropriately:
• "Auto Reduce/Enlarge" or "Auto Paper Select"
• "With image rotation" in "Auto Tray Switching" of User Tools
128
ThemisC1_EN_Copy_F_FM.book Page 129 Monday, December 27, 2004 4:10 PM
Supplementary Specifications
❖ Duplex
• You cannot use the following copy paper with this function:
• Paper thicker than 105 g/m2, 28 lb.
• Paper thinner than 64 g/m2, 17 lb.
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5
JISKL, A5KL, 11" × 17"L, 81/2" × 14"L, 81/2" × 13"L, 81/2" × 11"KL,
81/4" × 13"L, 8" × 13"L, 71/4" × 101/2"L 51/2" × 81/2"L, 16KKL, 8KL
❖ Combine
• You cannot use the bypass tray with this function.
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it will be automatically
adjusted to within acceptable range. However, with some ratios, parts of
the image might not be copied.
• You cannot use custom size paper.
• A separation line between originals can be printed with the User Tools. ⇒
p.115 “Separation Line in Combine”
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies properly.
• If the number of originals placed is less than the number specified for combining, the last page segment will be left blank as shown.
6
129
ThemisC1_EN_Copy_F_FM.book Page 130 Monday, December 27, 2004 4:10 PM
Specifications
❖ Series Copies
• The machine sets the reproduction ratio automatically to meet the paper
size and copies the originals together onto the paper.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it is automatically adjusted to within acceptable range. However, with some ratios, parts of the
image might not be copied.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies properly.
• You cannot copy with originals different in size and orientation.
• If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.
• In Magazine or Booklet mode, the copying may take some time after scanning originals.
• When the 1000-Sheet finisher is installed, if you select Saddle Stitch function in Magazine or Booklet mode, the machine staples and folds the paper
in the center, then delivers the paper folded.
6
❖ Image Repeat
Depending on the paper size, ratio, and orientation, parts of repeated images
may not be copied.
❖ Centring
Though the original is set to a different orientation from the paper loaded, the
machine will not rotate the image by 90° (Rotate copy).
❖ Erase
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted:
• Metric version
Where original is placed
Paper size and orientation
Exposure glass
A3L, B4 JISL, A4KL, B5 JISKL, 81/2" × 13"L
ADF
A3L, B4 JISL, A4KL, B5 JISKL, A5KL,
81/2" × 13"L
• Inch version
130
Where original is placed
Paper size and orientation
Exposure glass
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
ADF
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL,
10" × 14"L, 51/2" × 81/2"KL
ThemisC1_EN_Copy_F_FM.book Page 131 Monday, December 27, 2004 4:10 PM
Supplementary Specifications
❖ Margin Adjustment
• If you set a binding margin that is too wide, part of the image may not be
copied.
• When making copies in Combine mode, the binding margin is added to
the copies after the combination is finished.
❖ Background Numbering
If the numbers overlap the copied image, the parts overlapped may look like
some pattern.
❖ Preset Stamp
• You can change the size and density of the stamp with User Tools. Depending on the setting, density may change.
• Depending on paper size, if you change the stamp size, parts of the stamp
might not be printed.
❖ Date Stamp
• When using Combine mode, the date stamp is printed as follows:
6
AFZ004S
• When using Magazine or Booklet function, the date stamp is printed as follows:
AFZ005S
❖ Page Numbering
When page numbering is used with Combine mode, page numbers are printed as follows:
• Page Numbering per original:
Combined with 1 Sided / 2 Sided in the Combine function
GCANPE0E
• Page Numbering per copy:
Combined with Magazine or Booklet function
131
ThemisC1_EN_Copy_F_FM.book Page 132 Monday, December 27, 2004 4:10 PM
Specifications
• Page Numbering per copy:
Combined with 1 Sided / 2 Sided in the Combine function
GCANPE2E
If you combine this function with the Duplex (Top to Top) function and select
[P1, P2] or [1/n, 2/n], page numbers on the back are printed as follows:
GCSTMPBE
1. Front
2. Back
6
❖ Front Cover, Front/Back Cover
• If Blank mode is selected, the cover will not be counted as a copy.
• Front and back covers are two-sided copied depending on the settings
made in Display Time in Cover Sheet Tray of User Tools (System Settings).
• If Display Time is selected to the At Mode Selected, settings made in
Cover Sheet Tray will take priority.
• If Display Time is selected to Full Time, settings made in Paper Type
will take priority.
See “Paper Type” and “Cover Sheet Tray” in “Tray Paper Settings”,
General Settings Guide.
❖ Slip Sheets
If you do not copy onto slip sheets, they are excluded from the number of copies counted.
132
ThemisC1_EN_Copy_F_FM.book Page 133 Monday, December 27, 2004 4:10 PM
INDEX
1 sided → 2 sided, 49
2 sided → 1 sided, 49
2 sided → 2 sided, 49
90° turn, 14
A
Accessing user tools
copier/document server features, 107
A.C.S.
priority, 121
sensitivity, 121
Adjust Color Image, 120
Adjusting
background density, 87
colors based on selected color, 88
contrast, 86
copy image density, 32
sharpness/softness, 86
text/photo sensitivity, 87
U.C.R., 87
Adjust/Program Color key, 5
Auto
color selection, 28
image density, 32
image density priority, 100
paper select, 34
paper select priority, 99
reduce/enlarge, 38
tray switching, 108
Auto paper select, 35
B
Background density of ADS
(Full Color/Two-color), 120
Basic procedure, 19
Batch, 15
Black/White Copy, 28
Border erase, 63
C
Center/border erase, 64
Center erase, 63
Change
date format, 71
stamp position, 68, 71
Changing
number of sets, 44
registered settings, 85
stamp position, 73
stamp position, size and density, 67
stored program, 82
Check Modes key, 5
Clear Modes key, 5
Clear/Stop key, 6
Color
adjustment, 83
adjustment/program, 83
background, 31
balance, 84
balance program, 84
circle, 5
functions, 28
mode priority, 110
selection key, 6
Color Adjustment, 83
Color functions
convert colors, 29
erase color, 30
selecting a color mode, 28
Color image setting
color sensitivity, 120
Colors
mixing manually with number keys, 89
Combination chart, 123
Combined auto and manual image density, 32
Control panel, 5
Copier / Document Server Features, 99
Copier functions, 32
1 sided combine, 51
2 sided combine, 52
adjusting copy image density, 32
auto reduce/enlarge, 38
book originals, 55
centring, 60
covers, 75
date stamp, 70
designate, 76
directional magnification (%), 40
directional size magnification (inch), 41
double copies, 59
duplex, 49
margin adjustment, 64
page numbering, 72
preset reduce/enlarge, 37
preset stamp, 66
selecting copy paper, 34
133
ThemisC1_EN_Copy_F_FM.book Page 134 Monday, December 27, 2004 4:10 PM
selecting the original type, 33
series copies, 54
size magnification, 39
slip sheets, 78
sort, 42
stack, 44
staple, 46
user stamp, 67
zoom, 38
Copy functions
image repeat, 58
mirror, 61
positive/negative, 61
specified area repeat, 59
Copying, 19
back Side of the Paper, 25
interrupt copy, 20
job preset, 21
left original beeper, 20
OHP Transparencies or Thick Paper, 24
onto envelopes, 26
with registered settings, 85
Copying from bypass tray
onto custom size paper, 23
onto standard size paper, 23
Covers
Front, 76
front/back, 76
Create margin function, 37
D
Date stamp, 70, 118
Change color, 71
change format, 71
change position, 71
font, 118
format, 118
position, 118
position and original orientation, 70
size, 118
stamp color, 118
stamp setting, 118
superimpose, 118
Deleting
program, 82
registered settings, 85
user colors, 90
user stamp, 69
Display panel, 5
Document server, 79
134
E
Edit, 102, 112
1 sided→2 sided auto margin − T to B, 113
1 sided→2 sided auto margin − T to T, 113
back margin − left/right, 112
back margin − top/bottom, 113
copy order in combine, 114
double copies separation line, 115
erase border width, 113
erase center width, 113
erase original shadow in combine, 113
front cover copy in combine, 113
front margin − left/right, 112
front margin − top/bottom, 113
image repeat separation line, 114
Orientation: Booklet, Magazine, 116
separation line in combine, 115
Energy Saver key, 5
Erase, 62
border, 62
border width, 113
center, 62
center/border, 62
center width, 113
color, 30
original shadow in combine, 113
Exiting user tools, 107
F
Font, 118
Format, 118
Full color copy, 28
Function status indicators, 6
G
General features, 99, 100, 108, 109, 110
auto image density priority, 111
auto paper select priority, 108
auto tray switching, 108
change initial mode, 109
clear bypass mode, 110
color mode priority, 110
copy function key, 110
copy orientation in duplex mode, 109
document server storage key, 110
duplex mode priority, 109
job end call, 109
max. copy quantity, 109
original orientation in duplex mode, 109
original photo type priority, 108
ThemisC1_EN_Copy_F_FM.book Page 135 Monday, December 27, 2004 4:10 PM
original type display, 108
original type priority, 108
paper display, 108
tone − original remains, 109
two-color mode priority, 110
Generation copy, 33
I
Messages, 91
Missing image area, 12
Mixed size, 16
N
Number keys, 6
O
Image adjustment, 86
background density, 86, 87
contrast, 86
sharpness/softness, 86
text/photo sensitivity, 86, 87
U.C.R., 86, 87
Image repeat
specified area repeat, 59
whole area repeat, 58
Indicators, 5
Input/Output, 105, 119
auto sort, 120
letterhead setting, 120
memory full auto scan restart, 120
rotate sort − auto paper continue, 119
SADF auto reset, 119
select stack function, 120
switch to batch (SADF), 119
Interrupt key, 5
K
OHP transparencies, 78
one-sided combine
1 sided 2 pages → combine 1 side, 51
1 sided 4 pages → combine 1 side, 51
1 sided 8 pages → combine 1 side, 51
2 sided 1 page → combine 1 side, 51
2 sided 2 pages → combine 1 side, 51
2 sided 4 pages → combine 1 side, 51
Operation switch, 6
Original
combine, 51
copy orientation, 50
orientation, 13
orientation and completed copies, 49
orientation in duplex mode, 109
photo type priority, 108
type display, 108
type priority, 108
Originals, 9
Originals not recommended for ADF, 9
P
Key
adjust/program color, 5
check modes, 5
clear modes, 5
clear/stop, 6
energy saver, 5
interrupt, 5
program, 5
sample copy, 6
# (sharp), 6
start, 6
user tools/counter, 5
L
Left original
beeper, 20
M
Main power indicator, 6
Manual image density, 32
Manual paper select, 35
Map, 33
Page Numbering, 72, 118
Page numbering
color, 73
duplex back page stamping position, 119
first printing page, 73
font, 118
page numbering in combine, 119
position, 73
position and orientation of originals, 72
size, 118
stamp color, 119
stamp format, 118
stamp position, 119
start number, 73
superimpose, 119
Pale, 33
Photo, 33
Placing
custom size originals, 17
originals, 9, 13, 14, 15, 17
originals in ADF, 15
originals on exposure glass, 14
135
ThemisC1_EN_Copy_F_FM.book Page 136 Monday, December 27, 2004 4:10 PM
Preset stamp, 116
changing color, 67
changing density, 67
changing position, 67
changing size, 67
color, 117
format, 117
language, 116
position, 116
position and original orientation, 66
priority, 116
Program key, 5
Programs, 81
R
Recalling a program, 82
Renaming a color, 89, 90
Reproduction ratio, 100, 101, 111
enlarge, 111
priority setting − enlarge, 111
priority setting − reduce, 112
ratio for create margin, 112
reduce, 111
R/E priority, 112
shortcut R / E, 111
Rotated copy, 36
S
SADF, 16
Sample copy, 43
Sample copy key, 6
Sampling user colors, 90
Screen contrast knob, 5
Selecting
color mode, 28
copy paper, 34
original type, 33
Series copies, 54, 130
book → 1 sided, 54
book → 2 sided, 54
front & back → 2 sided, 54
# (sharp) key, 6
Single color copy, 28
Sizes
detectable by auto paper select, 10
difficult to detect, 11
of recommended originals, 9
136
Sort, 42
rotate sort, 42
shift sort, 42
Specifications, 123
Stack, 44
Stamp, 116
color, 117, 118, 119
date stamp, 70
format, 117, 118
language, 116
page numbering, 72
position, 116, 117, 118, 119
position and original orientation, 67, 70
preset stamp, 66
priority, 116
setting, 118
user stamp, 67
Standard orientation, 14
Stapling position and original setting, 46
Start key, 6
Storing
adjusted color balance, 84
data, 79
program, 81
Superimpose, 118, 119
Supplementary informations
bypass tray copy, 124
centring, 130
combine, 129
date stamp, 131
directional size magnification, 125
duplex, 129
erase, 130
front/back cover, 132
front cover, 132
image repeat, 130
margin adjustment, 131
mixed size mode, 124
page numbering, 131
preset enlarge/reduce, 124
preset stamp, 131
rotate sort, 126
series copies, 130
size magnification, 125
slip sheets, 132
sort, 126
stack, 126
staple, 127
zoom, 125
Supplementary specifications, 124
ThemisC1_EN_Copy_F_FM.book Page 137 Monday, December 27, 2004 4:10 PM
T
Text, 33
Text / Photo, 33
Tone − original remains, 109
Troubleshooting, 91
memory is full, 98
problems operating the machine, 91
you cannot make clear copies, 93
you cannot make copies as you want, 95
Two color copy, 28
two-sided combine
1 sided 16 pages → combine 2 side, 53
1 sided 4 Pages → combine 2 side, 52
1 sided 8 pages → combine 2 side, 52
2 sided 16 pages → combine 2 side, 53
2 sided 4 pages → combine 2 side, 53
2 sided 8 pages → combine 2 side, 53
Types of duplex copies, vi
U
User color, 88
User stamp, 67, 117
changing color, 68
changing position, 68
colors, 118
delete, 69
format, 117
position, 117
position and original orientation, 67
program, 68
program/delete, 117
User tools, 99
User Tools/Counter key, 5
W
Weights of recommended originals, 9
What you can do with this machine, vi
What you can do with this machine
<Color Functions/Color Adjustments>, iii
137
ThemisC1_EN_Copy_F_FM.book Page 138 Monday, December 27, 2004 4:10 PM
MEMO
138
ThemisC1_EN_Copy_F_FM.book Page 139 Monday, December 27, 2004 4:10 PM
MEMO
139
ThemisC1_EN_Copy_F_FM.book Page 140 Monday, December 27, 2004 4:10 PM
MEMO
140
EN
USA
B156-7509A
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=152 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.080000 mm
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
a means POWER ON.
b means POWER OFF.
c means STAND BY.
For safe and correct use of this machine, please be sure to read the Safety Information in the General
Settings Guide before you use it.
Important
Trademark
Acrobat® is a registered trademark of Adobe Systems Incorporated.
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Notes
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see P.3 “Machine Types”.)
•
Type 1: C2410/DSc424/LD124c/Aficio 3224C
•
Type 2: C3210e/DSc432/LD132c/Aficio 3232C
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, the supplier recommends that you use genuine toner from the supplier.
The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from the supplier with your office products.
Power Source
120V, 60Hz, 12A or more
Please be sure to connect the power cord to a power source as shown above. For details about power
source, see “Power Connection” in the General Settings Guide.
Copyright © 2005
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=152 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.080000 mm
Operating Instructions
Copy Reference
Placing Originals
Copying
Color Adjustment/Program
Troubleshooting
User Tools (Copier / Document Server Features)
Specifications
Type for C2410/DSc424/LD124c/Aficio 3224C
Type for C3210e/DSc432/LD132c/Aficio 3232C
Printed in China
EN USA B156-7509A
B1567509A
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety
Information in the "General Settings Guide" before using the machine.