Rackmount RP-819 User manual

User Manual
Widescreen LCD Display - 19", 22" size
1U Display drawer :
RP-W119
Rackmount display :
RP-W822
RP-W719
4:3 LCD Display - 15", 17", 19", 20" size
Rackmount display :
RP-615 / RP-717 / RP-819 / RP-920
SP-717 / SP-819 / SP-920
1U Display drawer :
RP-115 / RP-117 / RP-119 / RP-120
RP-1415 / RP-1417 / RP-1419 ( short-depth )
1U Display drawer :
SP-117 / SP-119 / SP-120
( designed for SUN Solaris )
Options :
- BNC + S-Video
- DVI
- Audio
- Touchscreen
- DC power
- Quad Display
Contents
Chapter 1
Getting Started
1.1
1.2
1.3
1.4
1.5
1.6
Important Safeguards.........................................................1
Regulatory Notice...............................................................2
Before Installation...............................................................3
Unpacking...........................................................................3
Optional Accessories..........................................................3
Peripheral Products............................................................4
Part 1
Widescreen LCD Display
Chapter 2
RP-W719 & RP-W822
2.1
2.2
2.3
2.4
Chapter 3
Installation.......................................................................7-8
Connection.........................................................................9
Package Contents.............................................................10
Structure Diagram.............................................................11
How to Install “One Man” Installation Slides................12-13
How to Use the Slides......................................................14
Connection.......................................................................15
Operation
4.1
4.2
Chapter 5
Structure Diagram...............................................................6
RP-W119
3.1
3.2
3.3
3.4
3.5
Chapter 4
Package Contents...............................................................5
On-screen Display Operation............................................16
On-screen Menu...............................................................17
Optional Specification
5.1
5.2
5.3
5.4
5.5
5.6
5.7
DVI-D Option.....................................................................18
BNC + S-Video Option.......................................................19
Audio Option......................................................................20
Touchscreen Options...................................................21-22
Front NEMA / IP65 Option ................................................23
Quad Display Option.........................................................24
DC Power Options............................................................25
Part 2
4:3 LCD Display
Chapter 6
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
6.1
6.2
6.3
6.4
Chapter 7
Installation...................................................................28-29
Connection.......................................................................30
Package Contents.............................................................31
Structure Diagram.............................................................32
How to Install “One Man” Installation Slides................33-34
How to Use the Slides......................................................35
Connection.......................................................................36
Operation
8.1
8.2
Chapter 9
Structure Diagram............................................................27
RP-120
SP-120
RP-115, RP-117 & RP-119
SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
7.1
7.2
7.3
7.4
7.5
Chapter 8
Package Contents............................................................26
On-screen Display Operation............................................37
On-screen Menu...............................................................38
Optional Specification
9.1
9.2
9.3
9.4
9.5
9.6
9.7
DVI-D Option.....................................................................39
BNC + S-Video Option.......................................................40
Audio Option................................................................41-42
Touchscreen Options...................................................43-44
Front NEMA / IP65 Option.................................................45
Quad Display Option.........................................................46
DC Power Options............................................................47
Chapter 10 LCD Specifications...............................................48-50
Chapter 11 Troubleshooting..........................................................51
Chapter 12 Dimensions.................................................................52-53
Chapter 1
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
□
□
□
□
□
□
□
□
■
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
P.1
Chapter 1
1.2 Regulatory Notice
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■
When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
■
■
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■
■
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■
Only qualified service personnel should open the chassis. Opening it yourself could damage the equip
ment and invalidate its warranty.
■
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
■
■
■
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
P.2
Chapter 1
1.3 Before Installation
■
■
■
■
It is very important to locate the Rackmount LCD Drawer / Display in a suitable environment.
The surface for placing and fixing the Rackmount LCD Drawer / Display should be stable and level or mounted into a
suitable cabinet.
Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
Convenience for connecting the Rackmount LCD Drawer / Display to the related facilities should be well considered
too.
1.4 Unpacking
The Rackmount LCD Drawer / Display comes with the standard parts shown on the package contents. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.5 Optional Accessories
1. Power Cord
1.1 IEC power cord
1.2 NEMA 5-15 power cord (US)
1.3 BS 1363 power cord (UK)
1.4 CEE 7/4 power cord (German)
1.5 AS 3112 power cord (Australia)
P.3
Chapter 1
1.6 Peripheral Products
Item
Matrix Cat6 KVM
Matrix DB-15 KVM
Combo Cat6 KVM
Combo DB-15 KVM
PS/2 DB-15 KVM
Keyboard Drawer
Model No.
Description
MU-1602 / MU-1603 / MU-1604
Matrix Cat6 16 port KVM
MU-IP1613 / MU-IP1614 / MU-IP1624
Matrix IP Cat6 16 port KVM
MU-3202 / MU-3203 / MU-3204
Matrix Cat6 32 port KVM
MU-IP3213 / MU-IP3214 / MU-IP3224
Matrix IP Cat6 32 port KVM
M-802 / M-803 / M-804
Matrix DB-15 8 port KVM
M-IP813 / M-IP814 / M-IP824
Matrix IP DB-15 8 port KVM
M-1602 / M-1603 / M-1604
Matrix DB-15 16 port KVM
M-IP1613 / M-IP1614 / M-IP1624
Matrix IP DB-15 16 port KVM
U-801 / U-802 / U-IP802
Combo Cat6 8 port KVM
U-1601 / U-1602 / U-IP1602
Combo Cat6 16 port KVM
U-3201 / U-3202 / U-IP3202
Combo Cat6 32 port KVM
CV-S801 / CV-802 / IP-802
Combo DB-15 8 port KVM
CV-S1601 / CV-1602 / IP-1602
Combo DB-15 16 port KVM
CV-401 / CV-801 / CV-1601
4 / 8 / 16 port PS/2 DB-15 KVM
RK-1
Rackmount keyboard drawer (with KVM options)
RK-2
Rackmount keyboard drawer (short depth version)
P.4
Chapter 2
2.1 Package Contents
RP-W719 & RP-W822
1
3
6
4
7
2
5
al
User Manu
1 Rackmount LCD display x 1 pc
2 User manual x 1 pc
3 6’ VGA cable (male to male) x 1 pc
4 Power cord x 1 pc
5 Auto switch power adapter x 1 pc
6 M3.2*4.5mm screw x 4 pcs
7 Power adapter bracket x 1 pc
P.5
Chapter 2
2.2 Structure Diagram
RP-W719 & RP-W822
Power adapter
Front view
Rear view
3
1
2
Power cord
1
LCD interchangeable module kit
2
LCD membrane
3
Power adapter bracket
Power adapter bracket installation
M3.2*4.5mm screw x 4 pcs
P.6
Chapter 2
2.3 Installation
RP-W719
■
Install each screw shown in Figure 1.
■
Fix the LCD into the rack.
Figure 1.
* M6 screws are not provided.
Figure 2.
P.7
Chapter 2
2.3 Installation
RP-W822
1
2
Figure 3.
Figure 4.
■
■
Install each screw shown in Figure 3.
Insert the upper part of the LCD display to the rack shown
in Figure 4.
* M6 screws are not provided.
3
4
Figure 5.
Figure 6.
■
■
Push the lower part of the LCD into the rack.
P.8
Installation completed.
Chapter 2
2.4 Connection
RP-W719 & RP-W822
DB-15 VGA female connector
Power input
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest turning off power to all devices before
connecting them. Apply power to connected devices again only after the Rackmount LCD
Drawer is receiving power. The company is not responsible for damage caused in this
way.
P.9
Chapter 3
3.1 Package Contents
RP-W119
1
5
6
2
3
7
al
User Manu
8
4
1 LCD drawer x 1 pc
2 6’ VGA cable (male to male) x 1 pc
3 User manual x 1 pc
4 Power cord x 1 pc
5 Mounting bracket x 2 pcs
6 M6*15mm screw x 8 pcs
7 M6 cage nut x 6 pcs
8 Cup washer x 8 pcs
P.10
Chapter 3
3.2 Structure Diagram
RP-W119
1
3
2
4
5
1
LCD interchangeable module kit
4 Carry handle to release the 2-pt lock
2
“One Man” Installation Slide
5 2-point lock
3
LCD membrane
P.11
3.3 How to Install "One Man" Installation Slides
Chapter 3
Install into rack
1
Rear side
Right bracket
■
Left bracket
■
■
Front side
Attach the left and right mounting bracket to rack 19”
mounting rails.
Adjust the rear mouting bracket to fit your rack.
M6 screw and cup washer x 6 pcs included.
Caution : Leaving the screws slightly loose, until
you complete the installation in step 4
Right front
Left front
2
Mounting bracket
■ Pick up the LCD drawer.
■ Insert the LCD drawer into the mounting bracket.
■ Pull and hold the left & right black arrow buttons on the rails.
■ Return the LCD drawer to park position.
Black arrow button
P.12
3.3 How to Install "One Man" Installation Slides
Chapter 3
3
■
■
Attach front left and right mounting ears of the LCD
drawer to vertical mounting rails.
M6 screw and cup washer x 2 pcs included.
4
Complete the installation
■
P.13
Tighten all 8 pcs of M6 screw to complete the installation.
Chapter 3
3.4 How to Use the Slides
RP-W119
■
L
A black arrow release button is located on the
outside of each slide. (shown in Figure 7).
I
Figure 7.
■
L
Pull and hold the black arrow button on either
side of the LCD drawer to unlock.
(shown in Figure 8).
I
Figure 8.
■
Push the LCD drawer into the rack. (shown in
Figure 9).
Caution :
Figure 9.
P.14
Keep your fingers away from the
slide stop
Chapter 3
3.5 Connection
RP-W119
Power
VGA
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest turning off power to all devices before
connecting them. Apply power to connected devices again only after the Rackmount LCD
Drawer is receiving power. The company is not responsible for damage caused in this
way.
P.15
Chapter 4
4.1 On-screen Display Operation
RP-W719 & RP-W822
LCD membrane
RP-W119
LCD membrane
Membrane Switch
Function
Power light
Green = On
Orange = Power saving
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button
for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
P.16
Chapter 4
4.2 On-screen Menu
RP-W719, RP-W822 & RP-W119
OSD Configuration Page
Image:
To enter into the brightness, contrast, color temp, red, green, and
blue
Geometry:
To enter into the auto adjust, H position, V position, phase and
clock
Video:
To enter into the colour, tint, sharpness, noise reduction, DCDi and
TV Setup
Audio:
To enter into volume, bass, treble, balance, AVL and mute
Misc:
To enter into the language, OSD position, graphic mode, ratio,
reset and timer
P.17
Chapter 5
5.1 DVI-D Option
RP-W719 & RP-W822
VGA
DVI-D
Power
RP-W119
Power
DVI-D
Remarks
■ Package includes 1 x 6ft DVI-D cable
P.18
VGA
Chapter 5
5.2 BNC + S-Video Option
RP-W719 & RP-W822
VGA
S-Video BNC
Power
RP-W119
Power
S-Video BNC
Remarks
■ Package includes 1 x 6ft S-Video cable
P.19
VGA
Chapter 5
5.3 Audio Option
RP-W719 & RP-W822
Speaker
Audio
VGA
Power
RP-W119
Speaker
Power
Audio
VGA
Remarks:
Audio input is 35mm audio plug
The speaker is sharing the same power with LCD.
■
■
P.20
Chapter 5
5.4 Touchscreen Options
RP-W719 & RP-W822
USB interface
VGA
USB
Power
Serial
Power
Serial interface
VGA
P.21
Chapter 5
5.4 Touchscreen Options
e-Resistive
Model
Screen size
-19WTRB / -19WTRS
-22WTRB / -22WTRS
19" wide
22" wide
Interface
USB / serial
Optical transmittance
80% ± 3%
Surface hardness
≥3H (JIS K5400)
Operating system
Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Capacitive
Model
Screen size
-19WTCB / -19WTCS
-22WTCB / -22WTCS
19" wide
22" wide
Interface
USB / serial
Optical transmittance
93% ± 2%
Surface hardness
>9H Surface hardness, withstand over 300 million touches
Operating system
Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
Remarks
■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■ Serial touchscreen package includes 1 x 6ft serial cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
■ Touchscreen in other brands are available on request
P.22
Chapter 5
5.5 Front NEMA 4 / IP65 Option
RP-W719 & RP-W822
3
1
2
4
1
Rear case
2
LCD panel
3
4mm protective glass (Front NEMA 4 / IP65 protection)
4
Aluminum front panel
Remarks
■ 4mm thickness of protective glass is not toughened one, please handle it carefully.
P.23
Chapter 5
5.6 Quad Display Option
Specifications
RS-232
Alarm I/O
VCR in
VCR out
Video IN
1~4
Video Loop
1~4
AV BNC
Item
Model Number
VGA
Power
Description
QD (NTSC)
QD (PAL)
Number of Color
16.7 M
16.7 M
Imaging System
NTSC
PAL
1024 x 525
1024 x 625
60
50
Resolution
Refresh Rate
Video Input
Video Output
Camera Input
1.0 Vpp, 75 Ohm x 4
VCR Input
1.0 Vpp, 75 Ohm x 1
Live Monitor
1.0 Vpp, 75 Ohm x 1
Loop Through Out
1.0 Vpp, 75 Ohm x 4
VCR Output
1.0 Vpp, 75 Ohm x 1
Auto Gain Control
Yes
Time / Date
Yes
On Screen Display
Yes
Camera Title
Display Format
8 Character Title
2 x Zoom On
Playback
Yes
QUAD
Yes
FULL
Yes
SEQUENCY
Yes
Dwell Time
0 to 99 Sec Adjustable
Built-in Buzzer
Yes
Key Lock
Yes
Remarks
■ For more details, please refer to Quad Display User Manual.
P.24
Chapter 5
5.7 DC Power Options
RP-W719 & RP-W822
VGA
DC Power input
RP-W119
DC Power input
Model
VGA
12V
24V
48V
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Input rating
Input current
Output rating
Remarks
■ Package does not include power cord and AC power adapter
P.25
Chapter 6
6.1 Package Contents
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
1
3
6
4
7
2
5
al
User Manu
1 Rackmount LCD display x 1 pc
2 User manual x 1 pc
3 6’ VGA cable (male to male) x 1 pc
4 Power cord x 1 pc
5 Auto switch power adapter x 1 pc
6 M3.2*4.5mm screw x 4 pcs
7 Power adapter bracket x 1 pc
P.26
Chapter 6
6.2 Structure Diagram
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
Front view
Rear view
Power adapter
For 15", 17” & 19” LCD
3
1
2
Power cord
1
LCD interchangeable module kit
2
LCD membrane
3
Power adapter bracket
Power adapter bracket installation
M3.2*4.5mm screw x 4 pcs
P.27
Chapter 6
6.3 Installation
RP-615, RP-717 & RP-819
SP-717 & SP-819
■
Install each screw shown in Figure 10.
■
Fix the LCD into the rack.
Figure 10.
* M6 screws are not provided.
Figure 11.
P.28
Chapter 6
6.3 Installation
RP-920 & SP-920
■
Install each screw shown in Figure 12.
■
Fix the LCD into the rack.
Figure 12.
* M6 screws are not provided.
Figure 13.
P.29
Chapter 6
6.4 Connection
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
DB-15 VGA female connector
Power input
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest turning off power to all devices before
connecting them. Apply power to connected devices again only after the Rackmount LCD
Drawer is receiving power. The company is not responsible for damage caused in this
way.
P.30
Chapter 7
7.1 Package Contents
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
1
6
7
2
4
8
3
5
9
al
User Manu
1 LCD drawer x 1 pc
2 6’ VGA cable (male to male) x 1 pc
3 User manual x 1 pc
4 Auto switch power adapter ( for external power version) x 1 pc
5 Power cord x 1 pc
6 Mounting bracket x 2 pcs
7 M6*15mm screw x 8 pcs
8 M6 cage nut x 6 pcs
9 Cup washer x 8 pcs
P.31
Chapter 7
7.2 Structure Diagram
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
1
3
2
4
5
1
LCD interchangeable module kit
4 Carry handle to release the 2-pt lock
2
“One Man” Installation Slide
5 2-point lock
3
LCD membrane
P.32
7.3 How to Install "One Man" Installation Slides
Chapter 7
Install into rack
1
Rear side
Right bracket
■
Left bracket
■
■
Front side
Attach the left and right mounting bracket to rack 19”
mounting rails.
Adjust the rear mouting bracket to fit your rack.
M6 screw and cup washer x 6 pcs included.
Caution : Leaving the screws slightly loose, until
you complete the installation in step 4
Right front
Left front
2
Mounting bracket
■ Pick up the LCD drawer.
■ Insert the LCD drawer into the mounting bracket.
■ Pull and hold the left & right black arrow buttons on the rails.
■ Return the LCD drawer to park position.
Black arrow button
P.33
7.3 How to Install "One Man" Installation Slides
Chapter 7
3
■
■
Attach front left and right mounting ears of the LCD
keyboard drawer to vertical mounting rails.
M6 screw and cup washer x 2 pcs included.
4
Complete the installation
■
P.34
Tighten all 8 pcs of M6 screw to complete the installation.
Chapter 7
7.4 How to Use the Slides
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
■
L
A black arrow release button is located on the
outside of each slide. (shown in Figure 14).
I
Figure 14.
■
L
Pull and hold the black arrow button on either
side of the LCD drawer to unlock. (shown in
Figure 15).
I
Figure 15.
■
Push the LCD drawer into the rack. (shown in
Figure 16).
Caution :
Figure 16.
P.35
Keep your fingers away from the
slide stop
Chapter 7
7.5 Connection
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
Internal power version
Power
External power version
VGA
( For short depth version - RP-1415 / 1417 / 1419 )
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest that turn off power to all devices before connecting them. Apply power to connected devices again only after the Rackmount
LCD Drawer receiving power. The company is not responsible for damage caused in this
way.
P.36
Chapter 8
8.1 On-screen Display Operation
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
15" LCD membrane
17", 19" & 20" LCD membrane
Power light
Green = On
Orange = Power saving
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button
for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
P.37
Chapter 8
8.2 On-screen Menu
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
OSD Configuration Page
Image:
To enter into the brightness, contrast, color temp, red, green, and
blue
Geometry:
To enter into the auto adjust, H position, V position, phase and
clock
Video:
To enter into the colour, tint, sharpness, noise reduction, DCDi and
TV Setup
Audio:
To enter into volume, bass, treble, balance, AVL and mute
Misc:
To enter into the language, OSD position, graphic mode, ratio,
reset and timer
P.38
Chapter 9
9.1 DVI-D Option
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
VGA
Power
DVI-D
Remarks
■ Package includes 1 x 6ft DVI-D cable
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
Internal power version
External power version
DVI-D
VGA
( For short depth version - RP-1415 / 1417 / 1419 )
Remarks
Package includes 1 x 6ft DVI-D cable
The depth of RP-1415 / 1417 / 1419 will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )
■
■
P.39
Chapter 9
9.2 BNC + S-Video Option
RP-615, RP-717, RP-819 & RP-920
VGA
S-Video BNC Power
RP-120
RP-115, RP-117 & RP-119
RP-1415, RP-1417 & RP-1419
Internal power version
External power version
S-Video BNC
( For short depth version - RP-1415 / 1417 / 1419 )
Remarks
■ Package includes 1 x 6ft S-Video cable
P.40
VGA
Chapter 9
9.3 Audio Option
RP-615, RP-717, RP-819 & RP-920
Speaker
Audio
VGA
Remarks
Audio input is 35mm audio plug
The speaker is sharing the same power with LCD.
■
■
P.41
Power
Chapter 9
9.3 Audio Option
RP-120
RP-115, RP-117 & RP-119
RP-1415, RP-1417 & RP-1419
Speaker
Internal power version
Power
External power version
Audio
VGA
( For short depth version - RP-1415 / 1417 / 1419 )
Remarks:
■ Audio input is 35mm audio plug
■ The speaker is sharing the same power with LCD.
P.42
Chapter 9
9.4 Touchscreen Options
RP-615, RP-717, RP-819 & RP-920
USB interface
VGA
USB
Power
VGA
Serial
Power
Serial interface
RP-120
RP-115, RP-117 & RP-119
RP-1415, RP-1417 & RP-1419
USB interface
Power
USB
VGA
Internal power version
( For short depth version - RP-1415 / 1417 / 1419 )
External power version
Serial interface
Power
Serial
Internal power version
( For short depth version - RP-1415 / 1417 / 1419 )
External power version
P.43
VGA
Chapter 9
9.4 Touchscreen Options
e-Resistive
Model
Screen size
-15TRB / -15TRS
-17TRB / -17TRS
-19TRB / -19TRS
-20TRB / -20TRS
15"
17"
19"
20"
Interface
USB / serial
Optical transmittance
80% ± 3%
Surface hardness
≥3H (JIS K5400)
Operating system
Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Capacitive
Model
Screen size
-15TCB / -15TCS
-17TCB / -17TCS
-19TCB / -19TCS
-20TCB / -20TCS
15"
17"
19"
22"
Interface
USB / serial
Optical transmittance
93% ± 2%
Surface hardness
>9H Surface hardness, withstand over 300 million touches
Operating system
Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
Remarks
■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■ Serial touchscreen package includes 1 x 6ft serial cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
■ Touchscreen in other brands are available on request
P.44
Chapter 9
9.5 Front NEMA 4 / IP65 Option
RP-615, RP-717, RP-819 & RP-920
1
3
2
4
1
Rear case
2
LCD panel
3
4mm protective glass (Front NEMA 4 / IP65 protection)
4
Aluminum front panel
Remarks
■ 4mm thickness of protective glass is not toughened one, please handle it carefully.
P.45
Chapter 9
9.6 Quad Display Option
Specifications
RS-232
Alarm I/O
VCR in
VCR out
Video IN
1~4
Video Loop
1~4
AV BNC
Item
Model Number
VGA
Power
Description
QD (NTSC)
QD (PAL)
Number of Color
16.7 M
16.7 M
Imaging System
NTSC
PAL
1024 x 525
1024 x 625
60
50
Resolution
Refresh Rate
Video Input
Video Output
Camera Input
1.0 Vpp, 75 Ohm x 4
VCR Input
1.0 Vpp, 75 Ohm x 1
Live Monitor
1.0 Vpp, 75 Ohm x 1
Loop Through Out
1.0 Vpp, 75 Ohm x 4
VCR Output
1.0 Vpp, 75 Ohm x 1
Auto Gain Control
Yes
Time / Date
Yes
On Screen Display
Yes
Camera Title
Display Format
8 Character Title
2 x Zoom On
Playback
Yes
QUAD
Yes
FULL
Yes
SEQUENCY
Yes
Dwell Time
0 to 99 Sec Adjustable
Built-in Buzzer
Yes
Key Lock
Yes
Remarks
■ For more details, please refer to Quad Display User Manual.
■ Quad display input is not applicable for SP series.
P.46
Chapter 9
9.7 DC Power Options
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
VGA
DC Power input
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
DC Power input
Model
VGA
12V
24V
48V
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Input rating
Input current
Output rating
Remarks
■ Package does not include power cord and AC power adapter
■ The depth of RP-1415 / 1417 / 1419 will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )
P.47
Chapter 10
10.1 LCD Specifications
RP-W719, RP-W822 & RP-W119
Item
Description
LCD Manufacturer
RP-W119
RP-W719
RP-W822
Wide 19" TFT
Wide 19" TFT
Wide 22" TFT
1440 x 990
1440 x 990
1680 x 1050
300
300
300
Color Support
16.7 M
16.7 M
16.7 M
Contrast Ratio (typ.)
1000:1
1000:1
1000:1
Viewing Angle (H/V)
160˚ x 160˚
160˚ x 160˚
160˚ x 160˚
408 x 255
408 x 255
474 x 296
Diagonal Size
Max. Resolution
Brightness (cd/m²)
Display Area (mm)
Tr Response Time (ms)
1.3
1.3
3.6
LCD Panel MTBF (hrs)
50,000
50,000
50,000
VGA Signal Input
Analog RGB, 0.7Vp-p
Sync. Type
Separate H/V, Composite, SOG
720 x 400, 70 Hz
640 x 480, 60/ 70/ 72/ 75 Hz
800 x 600, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 75 Hz
Resolution
1152 x 864, 60/ 70/ 75 Hz
1280 x 720, 60/ 70/ 75 Hz
1280 x 720, 60/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz
1280 x 1024, 60/ 75 Hz
1440 x 900, 60 Hz
Plug & Play DDC
1680 x 1050, 60 Hz
EDID 1.3
Connector
DB-15 connector
Power Input
Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption
Max. 48 Watt, Standby 5 Watt
Compatibility
Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Options
Graphic Input
DVI-D, BNC, S-Video & Quad display input
DC Power
Touchscreen
DC power input with 12V, 24V, 48V selection
-
Resistive & capacitive
AU
NEMA 4 / IP65
35mm audio plug
4mm thickness of protective glass
Environmental
Operation
0˚ to 50˚C Degree
Storage
-5˚ to 60˚C Degree
Relative Humidity
Shock
Vibration
5~90%, non-condensing
10G acceleration (11ms duration)
5~500Hz 1G RMS random vibration
P.48
Chapter 10
10.1 LCD Specifications
RP-120
RP-1415, RP-1417 & RP-1419
RP-115, RP-117, RP-119
RP-615, RP-717, RP-819 & RP-920
Item
LCD Manufacturer
Diagonal Size
Description
15" TFT
17" TFT
19" TFT
20" TFT
1024 x 768
1280 x 1024
1280 x 1024
1600 x 1200
250
250
250
300
Color Support
16.2 M
16.7 M
16.7 M
16.7 M
Contrast Ratio (typ.)
700:1
1000:1
1000:1
800:1
Viewing Angle (H/V)
160° x 130°
160˚ x 160˚
160˚ x 160˚
178˚ x 178˚
304 x 228
338 x 270
376 x 301
408 x 306
Max. Resolution
Brightness (cd/m²)
Display Area (mm)
Tr Response Time (ms)
5.7
1.3
1.3
7
LCD Panel MTBF (hrs)
30,000
50,000
50,000
45,000
VGA Signal Input
Analog RGB, 0.7Vp-p
Sync. Type
Separate H/V, Composite, SOG
640 x 400, 70 Hz
720 x 400, 70 Hz
640 x 480, 60/ 70/ 72/ 75 Hz
800 x 600, 60/ 70/ 72/ 75 Hz
Resolution
1024 x 768, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 75 Hz
-
1152 x 864, 60/ 70/ 75 Hz
-
1280 x 720, 60/ 70/ 75 Hz
1280 x 720, 60/ 75 Hz
-
1280 x 1024, 60/ 70/ 72/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz
-
1400 x 1050, 60 Hz
-
1600 x 1200, 60 Hz
Plug & Play DDC
EDID 1.3
Connector
Power Input
Power Consumption
Compatibility
DB-15 connector
Auto-sensing 100 to 240VAC, 50 / 60Hz
Max. 48 Watt, Standby 5 Watt
Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval
FCC, CE
Options
Graphic Input
DC Power
DVI-D, BNC, S-Video & Quad display input
DC power input with 12V, 24V, 48V selection
Touchscreen
Resistive & capacitive
AU
NEMA 4 / IP65
35mm audio plug
4mm thickness of protective glass
Environmental
Operation
0˚ to 50˚C Degree
Storage
-5˚ to 60˚C Degree
Relative Humidity
Shock
Vibration
5~90%, non-condensing
10G acceleration (11ms duration)
5~500Hz 1G RMS random vibration
P.49
Chapter 10
10.1 LCD Specifications
SP-120
SP-717, SP-819 & SP-920
SP-117 & SP-119
Item
Description
Form Factor
Diagonal Size
1U rack mounting on slide-out rails
17" TFT
19" TFT
20" TFT
1152 x 900 (Direct)
1152 x 900 (Direct)
1152 x 900 (Direct)
1280 x 1024 (Native)
1280 x 1024 (Native)
1600 x 1200 (Native)
250
250
300
Color Support
16.7 M
16.7 M
16.7 M
Contrast Ratio (typ.)
1000:1
1000:1
800:1
Viewing Angle (H/V)
160˚ x 160˚
160˚ x 160˚
178˚ x 178˚
338 x 270
376 x 301
408 x 306
Tr Response Time (ms)
1.3
1.3
7
LCD Panel MTBF (hrs)
50,000
50,000
45,000
Resolution
Brightness (cd/m²)
Display Area (mm)
VGA Signal Input
Analog RGB, 0.7Vp-p
Sync. Type
Separate H/V, Composite, SOG
720 x 400, 70 Hz
640 x 480, 60 /70 /72 /75 Hz
800 x 600, 60 /70 /72 /75 Hz
1024 x 768, 60 /70 /75 Hz
Resolution
1152 x 864, 60 /70 /75 Hz
1280 x 720, 60 /70 /75 Hz
1280 x 720, 60 /75 Hz
1280 x 1024, 60 /70 /72 /75 Hz
1280 x 1024, 60 /70 /75 Hz
-
1400 x 1050, 60 Hz
-
1600 x 1200, 60 Hz
Plug & Play DDC
EDID 1.3
Connector
Power Input
Power Consumption
Compatibility
DB-15 connector
Auto-sensing 100 to 240VAC, 50 / 60Hz
Max. 48 Watt, Standby 5 Watt
Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval
FCC, CE
Options
Graphic Input
DC Power
DVI-D input
DC power input with 12V, 24V, 48V selection
Environmental
Operation
0˚ to 50˚C Degree
Storage
-5˚ to 60˚C Degree
Relative Humidity
Shock
Vibration
5~90%, non-condensing
10G acceleration (11ms duration)
5~500Hz 1G RMS random vibration
P.50
Chapter 11
11.1 Troubleshooting
1. How do I adjust the resolution?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are determined by the display card in your computer.
2. Is interference signal appeared on LCD normal when shutting down the computer ?
In rare cases, interference may appear on the monitor. This may be caused by signal rate of VGA card and is considered
normal. The image quality can be improved by adjusting the phase or pixel rate automatically or manually.
3. The membrane power light is not ON
Press the power On / Off on LCD membrane to check if the monitor is in the ON mode.
Check the power cord is properly connected to the LCD keyboard drawer and power outlet.
4. Screen image is not centered or sized properly
Press the
button for two seconds to automatically adjust the image.
Adjust the H-position and V-position settings via On-screen menu.
For SP series LCD Drawer
1. How can I adjust the monitor resolution to 1152 x 900 for SUN Micro system ?
The S solution LCD drawer will automatically detect the 1152 x 900 resolution, so no user configuration should be necessary.
2. How do I adjust the resolution in MS Windows operation system?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are determined by the display card in your computer.
6. Is the LCD drawer hot-pluggable ?
The LCD drawer is hot-pluggable, but components of connected devices, such as the servers and KVMs, may not be
hot-pluggable. We suggest turning off the power to all devices before connecting them. Apply power to connected devices
again only after the LCD receives power.
P.51
Chapter 12
12.1 Dimensions
RP-W719, RP-W822 & RP-W119
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net Weight
Gross
Weight
RP-W719
480 x 57.5 mm
18.9 x 2.3"
7U
565 x 495 x 156 mm
22.2 x 19.5 x 6.1"
8 kg
18 lb
10 kg
22 lb
RP-W822
500.4 x 59.1 mm
19.7 x 2.3"
8U
565 x 539 x 156 mm
22.2 x 21.2 x 6.1"
12 kg
26 lb
15 kg
33 lb
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
13 kg
29 lb
18 kg
40 lb
RP-W119
442 x 650 x 44 mm
17.4 x 25.6 x 1.73"
RP-615 series
480 x 52 mm
18.9 x 2"
6U
565 x 406 x 156 mm
22.2 x 16 x 6.1"
6 kg
13 lb
8 kg
18 lb
RP-717 series
480 x 54 mm
18.9 x 2.1"
7U
565 x 450 x 156 mm
22.2 x 17.7 x 6.1"
7 kg
15 lb
8.5 kg
19 lb
RP-819 series
480 x 53 mm
18.9 x 2.1"
8U
565 x 495 x 156 mm
22.2 x 19.5 x 6.1"
8 kg
18 lb
10 kg
22 lb
RP-920 series
480 x 64 mm
18.9 x 2.5"
9U
565 x 539 x 156 mm
22.2 x 21.2 x 6.1"
12 kg
26 lb
15 kg
33 lb
SP-717 series
480 x 57 mm
18.9 x 2.2"
7U
565 x 450 x 156 mm
22.2 x 17.7 x 6.1"
7 kg
15 lb
8.5 kg
19 lb
SP-819 series
480 x 57 mm
18.9 x 2.2"
8U
565 x 495 x 156 mm
22.2 x 19.5 x 6.1"
8 kg
18 lb
10 kg
22 lb
SP-920 series
480 x 67 mm
18.9 x 2.6"
9U
565 x 539 x 156 mm
22.2 x 21.2 x 6.1"
12 kg
26 lb
15 kg
33 lb
P.52
Chapter 12
12.1 Dimensions
RP-120
SP-120
RP-115, RP-117, RP-119
SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net Weight
Gross
Weight
RP-120 series
442 x 650 x 44 mm
17.4 x 25.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
14 kg
31 lb
19 kg
42 lb
SP-120 series
442 x 650 x 44 mm
17.4 x 25.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8”
14 kg
31 lb
19 kg
42 lb
RP115 series
442 x 550 x 44 mm
17.4 x 21.6 x 1.73"
581 x 705 x 175 mm
22.9 x 27.8 x 6.9"
10 kg
22 lb
15 kg
33 lb
RP-117 series
446 x 600 x 44 mm
17.6 x 23.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
12 kg
26 lb
17 kg
37 lb
RP-119 series
446 x 600 x 44 mm
17.6 x 23.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
13 kg
29 lb
18 kg
40 lb
SP-117 series
446 x 600 x 44 mm
17.6 x 23.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8”
12 kg
26 lb
17 kg
37 lb
SP-119 series
442 x 600 x 44 mm
17.4 x 23.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
13 kg
29 lb
18 kg
40 lb
RP-1415 series
442 x 440 x 44 mm
17.4 x 17.3 x 1.73"
584 x 601 x 169 mm
23 x 23.7 x 6.7"
10 kg
22 lb
15 kg
33 lb
RP-1417 series
446 x 480 x 44 mm
17.6 x 18.9 x 1.73"
584 x 641 x 169 mm
23 x 25.2 x 6.7"
12 kg
26 lb
17 kg
37 lb
RP-1419 series
446 x 480 x 44 mm
17.6 x 18.9 x 1.73"
584 x 641 x 169 mm
23 x 25.2 x 6.7"
13 kg
29 lb
18 kg
40 lb
Model
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which
may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2011 Rackmount-Solutions-Pro.com. All rights reserved.
P.53