NITROUS
EDELBROCK NITROUS SYSTEMS
Edelbrock is known for innovative products, and our Nitrous
Systems are no exception. All Edelbrock Nitrous Systems are
dyno-tested and calibrated to deliver accurate and safe
horsepower gains with even distribution to each cylinder. Our
nitrous calibrations are determined through dyno-testing, not
simple mathematical formulas, which don’t take into account
real-world variables. Available from 20 to 500+ hp, Edelbrock
Nitrous Systems and components are the quickest and easiest
way to get large horsepower increases with a minimum of
engine modifications and expense. With the Performer and
Performer RPM Line of Nitrous Systems, you get a 50 to 250 horsepower increase at
the flip of a switch with an installation time of approximately four hours. Performer RPM
II systems include high-flow solenoids and stainless steel spray bars for 400+ hp
capability. Victor Jr. racing systems produce serious horsepower with jetting supplied
from 100 to 500+ horsepower. If you want to take it up to the extreme level we have
the Edelbrock Series E1, Series E2 and Series E3 Direct-Port Nitrous Systems which
yield a huge gain of up to 500+ horsepower! Check out these advanced features:
High-Flow Bottle Valve Included with All Systems
— Capable of Handling 500+ HP
Hinged Steel Red Powder Coated Bottle Brackets
— Rubber Insulators Included to Protect the Nitrous Bottle
Pre-Terminated Wiring Harness
— Longer Leads and Covered Fuse Holder for Better Corrosion Resistance
High-Quality, Powder Coated or Anodized Aluminum Nitrous Plates
— Work on Both Dual-Plane and Single-Plane Intakes
Detailed Installation Instructions
— Expert Technical Support, Toll-Free Tech Hotline and edelbrock.com
Precision-Machined Stainless Steel Nitrous and Fuel Solenoids
— Flow Matched to the Horsepower Range of Edelbrock Nitrous Systems
— Fully Repairable and Serviceable
— Durable Teflon ® Plunger Withstands Seal Expansion
Precision CNC-Machined Stainless Steel Jets
— Won’t Erode Like Brass Jets
EDELBROCK NITROUS SYSTEM CONFIGURATIONS AND FEATURES…
NITROUS SYSTEMS
HP ADDED
INJECTOR/PLATE TYPE
SOLENOIDS (QTY)
NITROUS BOTTLE
BRACKETS
50-75-100
100-150-175-200-250
100-150-175
100-150-200-250
75-250
100-250
100-150-200-250
200-400+
100-400+
200-400+
100-500
Square-bore or Spread-bore
Square-bore
Spread-bore
4500 Series
Square-bore
4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series
Performer (2)
Performer RPM (2)
Performer RPM (2)
Performer RPM (2)
Performer (2), Perf. RPM (2)
Performer (2), Perf. RPM (2)
Victor Pro (2), Perf. RPM (2)
Victor Pro (2)
Victor Pro (2), Perf. RPM (2)
Performer RPM (4)
Performer RPM (4)
10 lb. Powder Coated or Polished
10 lb. Powder Coated or Polished
10 lb. Powder Coated or Polished
10 lb. Powder Coated or Polished
10 lb. Powder Coated
10 lb. Powder Coated
10 lb. Powder Coated or Polished
10 lb. Powder Coated
10 lb. Powder Coated
10 lb. Powder Coated
10 lb. Powder Coated
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
100-150
40-80
50-150
150-300
40-150
40-60-80
40-75
Edelbrock Pro-Flo only
E1 or Dry (Nitrous-only) Nozzle
Dry (Nitrous-only) Nozzle
Edelbrock 5.0L only
Dry (Nitrous-only) Nozzle
E1 Nozzle
E1 or Dry (Nitrous-only) Nozzle
Performer RPM (2)
Performer (2)
Performer (2)
Performer RPM (2)
Performer (2)
Performer (2)
Performer (2)
10 lb. Powder Coated
10 lb. Powder Coated or Polished
10 lb. Powder Coated
Bottle Kits Sold Separately
10 lb. Powder Coated
10 lb. Powder Coated
10 lb. Powder Coated
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
20-30
Dry (Nitrous-only) Nozzle
Performer (1)
12 oz. Powder Coated
-
CARB/PLATE SYSTEMS
Performer
Performer RPM
Performer RPM
Performer RPM
Performer RPM Dual-Stage
Performer RPM Dual-Stage
Performer RPM Dual-Quad
Performer RPM II
Performer RPM II Dual-Stage
Victor Jr.
Victor Jr. Dual-Stage
EFI SYSTEMS
Performer RPM Pro-Flo
Universal Performer EFI (wet & dry)
Ford Performer EFI (dry)
Ford Performer RPM 5.0L (plate)
GM Performer EFI (wet & dry)
Dodge Hemi Performer EFI (wet)
Sport Compact Performer EFI (wet & dry)
CONCEALED KIT
Concealed Kit for Carbs/EFI
ENGINE CONFIGURATION TIPS FOR EDELBROCK NITROUS SYSTEMS
1
When using an Edelbrock Nitrous System,
extra fuel is required to make the added
horsepower. We recommend Edelbrock fuel
pumps on page 42, to supply the needed fuel for
all Edelbrock Nitrous Systems. Call the Edelbrock
Tech Line at 1-800-416-8628 for more information
in determining your fuel system needs.
2
Because of the high cylinder pressures
generated with nitrous systems, we
recommend high-strength internal engine
components such as forged pistons and
crankshaft, high-performance connecting
rods, etc. with power increases of 150
horsepower or more.
3
Since many standard ignition systems experience misfire at
high cylinder pressures and/or high RPM, we recommend
using a high-quality performance ignition system. All performance
upgrades such as Edelbrock Performer and Performer RPM Power
Packages, fresh air systems, cams, cylinder heads, etc. will work
with the Performer and Performer RPM Nitrous Systems. Victor Jr.
and direct port systems are for competition level engines only.
THERE'S A WHOLE LOT MORE…
VISIT OUR WEBSITE AND ORDER A FREE
NITROUS CATALOG FOR MORE TECHNICAL
PRODUCT INFORMATION!
#03718
WWW.EDELBROCK.COM
All parts on this page are not legal for sale or use on pollution controlled motor vehicles.
181
POWER PKG KITS SUPERCHARGERS CRATE ENGINES CARBS & ACCESS. FUEL PUMPS GASKETS INSTALL ITEMS MANIFOLDS EFI HEADS CAMS & ACCESS. NITROUS WATER PUMPS ACCESS. EXHAUST SUSPENSION SHOCKS QWIKDATA2 INDEX
INTRODUCTION
INDEX QWIKDATA2 SHOCKS SUSPENSION EXHAUST ACCESS. WATER PUMPS NITROUS CAMS & ACCESS. HEADS EFI MANIFOLDS INSTALL ITEMS GASKETS FUEL PUMPS CARBS & ACCESS. CRATE ENGINES SUPERCHARGERS KITS POWER PKG
NITROUS PLATE SYSTEMS
PERFORMER NITROUS PLATE SYSTEMS
SINGLE-STAGE: 50-100 HORSEPOWER
Nitrous System
#70001
Designed to be the best carb/plate kits available, Edelbrock kits include more jets than other brands giving
you greater tuneability. Our spray bars are precision machined on an EDM machine instead of standard
drilling, giving you the best flow characteristics available. Performer single-stage nitrous systems are
designed for use on carbureted V6 and V8 engines. Power increases can be adjusted from 50-100
horsepower. Edelbrock nitrous systems are simple to install with a 1/2" thick aluminum plate that fits
between the carburetor and the intake manifold.
Silver
Polished
Bottle
Bottle
Square-bore carbs (50-75-100 HP)..............................................................#70001 ...........#70031
Spread-bore (Q-Jet) carbs (50-75-100 HP)..................................................#70002 ...........#70032
PERFORMER PLATE KITS (50-75-100 HP)
Performer Plate Kits are an easy way to upgrade your existing system with Edelbrock Nitrous. Each kit
includes plate, stainless steel jet assortment, and braided stainless steel fuel and nitrous lines.
For square-bore carburetors (50-75-100 HP) ......................................................................#70011
For spread-bore (Q-Jet) carburetors (50-75-100 HP) ..........................................................#70012
Performer Plate Kit #70011
PERFORMER RPM
NITROUS PLATE SYSTEMS
SINGLE-STAGE: 100-250 HORSEPOWER
Performer RPM single-stage nitrous systems are designed for use on carbureted V8s. The solenoids are larger
than our Performer systems and power increases can be adjusted from 100-250 horsepower. Edelbrock Nitrous
Systems are simple to install with a 1/2" thick aluminum plate that fits between the carburetor and the manifold.
Silver
Polished
Bottle
Bottle
Square-bore carbs (100-150-175-200-250 HP) ............................................#70050 ...........#70033
Spread-bore (Q-Jet) carbs (100-150-175 HP) ..............................................#70051 ...........#70034
4500 Series carbs (100-150-200-250 HP) ....................................................#70053 ...........#70035
PERFORMER RPM PLATE KITS (100-150-175-200-250 HP)
Performer RPM Nitrous
System #70050
Performer RPM Plate Kits are an easy way to upgrade your existing system to Edelbrock RPM spec. Each kit
includes plate, stainless steel jet assortment, and braided stainless steel fuel and nitrous lines.
For square-bore carburetors (100-250 HP) .........................................................................#70060
For spread-bore (Q-Jet) carburetors (100-175 HP) .............................................................#70061
For 4500 Series carburetors (100-250 HP)..........................................................................#70063
PERFORMER RPM UPGRADE KITS
(100-150-175-200-250 HP)
Upgrade Kits include everything needed to upgrade Performer nitrous systems to a Performer RPM system
including plates, solenoid, jets and all hardware.
Performer RPM Square-bore Upgrade Kit (100-150-175-200-250 HP).................................#70021
Performer RPM Spread-bore (Q-Jet) Upgrade Kit (100-150-175 HP)...................................#70022
Performer RPM Square-Flange Plate Kit #70063
PERFORMER RPM II
NITROUS PLATE SYSTEMS
SINGLE- OR DUAL-STAGE
Performer RPM II Nitrous
System #70080
182
Performer RPM II Nitrous Carb/Plate Systems are available in single- or dual-stage configurations for power gains
from 200 to 400+ horsepower. Performer RPM II Single-Stage systems are designed for use on carbureted V8
engines. Performer RPM II Dual-Stage systems are designed for those who want to add power in stages to
soften the “hit” of the nitrous system to control excessive tire spin or violent chassis reaction. Both kits feature
Victor Pro fuel solenoids and Victor Pro bottom discharge nitrous solenoids for enhanced flow capacity. The 1/2"
thick aluminum spray bar plate fits between the carburetor and the intake manifold and features stainless steel
spray bars with more discharge holes than Performer RPM systems for more flow and superior atomization.
Single-Stage Dual-Stage
Silver Bottle Silver Bottle
Square-bore carbs (200-400+ HP)...............................................................#70080 ...........#70082
4500 Series carbs (200-400+ HP) ...............................................................#70081 ...........#70083
All parts on this page are not legal for sale or use on pollution controlled motor vehicles.
NITROUS
VICTOR JR. NITROUS PLATE SYSTEMS
SINGLE-STAGE: 200-400 HORSEPOWER
These systems feature four nitrous and four fuel jets, offering more tuning capabilities than any plate system
currently available. The efficient design, with a billet aluminum plate that’s only 11/16" thick, uses less
nitrous than conventional plate systems at the same power levels. Dyno tests on a 500-inch Chevy proved at
400 HP jetting, EGTs varied less than 5% from cylinder-to-cylinder. Additional features include shorter spray
bars that inject more liquid nitrous into the intake for more equal distribution across the plenum, more
balanced air/fuel ratio and a quicker response time. Kits include everything shown to the left including a
10-lb. nitrous bottle (shipped empty), stainless steel jet selection, hardware and installation/owner’s manual.
Silver
Bottle
Square-bore carbs (200-300-400+ HP)................................................................................#70056
4500 Series carbs (200-300-400+ HP).................................................................................#70055
Victor Jr. Nitrous Plate System #70055
PERFORMER RPM PRO-FLO
& PRO-FLO 2 EFI SYSTEMS
100-150 HORSEPOWER
Designed for Edelbrock Performer RPM Pro-Flo and Pro-Flo 2 EFI systems using our 4V air valve, these
Nitrous Systems include a 10-lb. capacity nitrous bottle (shipped empty), nitrous and fuel solenoids, billet
spray bar plate, aircraft quality steel braided hose, nitrous filter, stainless steel jet selection, aircraft quality
fittings and all necessary switches, brackets, hardware and owner’s manual for a complete installation.
Pro-Flo/Pro-Flo 2 4V EFI Systems (100-150 HP)..................................................................#70070
PRO-FLO/PRO-FLO2 EFI PLATE KIT
(100-150 HORSEPOWER)
This kit includes plate, stainless steel jet assortment, and braided stainless steel fuel and nitrous lines only.
Pro-Flo/Pro-Flo 2 4V EFI Plate Kit (includes stainless steel jets and lines from plate to solenoid)....#70071
Pro-Flo/Pro-Flo 2 EFI Nitrous System #70070
EFI NITROUS SYSTEMS
40-125 HORSEPOWER
EFI Nitrous System #70410
Edelbrock systems for EFI are available in a variety of universal and application specifics kits to suit virtually
any fuel injected engine. Wet systems utilize a direct port nozzle to inject nitrous and fuel directly into the
intake tract. Dry systems utilize a dry nozzle to inject only nitrous into your vehicles intake tract. These
Nitrous Systems include a 10-lb. capacity nitrous bottle (shipped empty), nitrous and fuel solenoids, wet or
dry nozzle (based on application), aircraft quality steel braided hose, nitrous filter, stainless steel jet selection,
aircraft quality fittings and all necessary switches, brackets, hardware and installation/owner’s manual.
Application
Horsepower
Wet/Dry
Silver bottle
Universal (Fits any 4- or 6-cylinder engine)...........................40-60-80.............Wet ..............#71820
Universal with return style fuel system
(Fits any 4-, 6- and 8-cylinder engine) ...................................50-60-70 .............Dry...............#71000
GM LT1 (Camaro/Firebird) ..........................................................80...................Dry...............#70205
LS1 Camaro/Firebird .......................................................80-100-125 ...........Dry...............#70200
LS1/LS6 C5 Corvette .......................................................80-100-125 ...........Dry...............#70202
LS1/LS2 Pontiac GTO.......................................................80-100-125 ...........Dry...............#70203
Dodge Hemi 5.7L & 6.1L (Sedans only) ...............................40-60-80.............Wet ..............#70216
Dodge Hemi 5.7L Truck 2003-07.......................................40-60-70.............Wet ..............#70217
Ford Mustang GT 2005-09 4.6L ..........................................50-100...............Wet ..............#70410
Ford Mustang 1986-95 5.0L & 1996-98 4.6L.........................80...................Dry...............#70400
Nissan 350z 2003-06...........................................................50-75................Dry...............#71007
EDELBROCK NITROUS
PRODUCTS CATALOG
FULL LINE CATALOG - 50 PAGES OF HARDCORE NITROUS
EFI Nitrous System #70216
WWW.EDELBROCK.COM
The Edelbrock nitrous product line has grown so expansive that it needs its own catalog. This catalog is packed
full of 100% Edelbrock nitrous, featuring more products and great technical content. This is a must have for the
serious nitrous tuner, racer or shop specializing in nitrous. Get the Edelbrock Nitrous catalog for FREE. To order
call 1-800-FUN-TEAM or visit www.edelbrock.com.
Edelbrock Nitrous Catalog (complete)................................................................................. #03718
All parts on this page are not legal for sale or use on pollution controlled motor vehicles.
183
POWER PKG KITS SUPERCHARGERS CRATE ENGINES CARBS & ACCESS. FUEL PUMPS GASKETS INSTALL ITEMS MANIFOLDS EFI HEADS CAMS & ACCESS. NITROUS WATER PUMPS ACCESS. EXHAUST SUSPENSION SHOCKS QWIKDATA2 INDEX
PLATE & EFI SYSTEMS
INDEX QWIKDATA2 SHOCKS SUSPENSION EXHAUST ACCESS. WATER PUMPS NITROUS CAMS & ACCESS. HEADS EFI MANIFOLDS INSTALL ITEMS GASKETS FUEL PUMPS CARBS & ACCESS. CRATE ENGINES SUPERCHARGERS KITS POWER PKG
NITROUS DIRECT PORT SYSTEMS
EDELBROCK DIRECT PORT NITROUS KITS
RACE-WINNING PERFORMANCE
WITH CHOICE OF FOUR NOZZLE DESIGNS
(Single) #72550
(Set of 8) #72560
(Single ) #72552
(Set of 8) #72562
(Single ) #72553
(Set of 8) #72563
(Single ) #72556
E1 SERIES:
E2 SERIES:
E3 SERIES:
SS DRY SERIES:
Constructed from
lightweight aluminum and
black anodized. Features
a unique fuel passage
design for extremely high
atomization, Direct bolton upgrade for other
brands that use a 90°
1/8" NPT design.
Designed with noted
drag racer Billy Glidden
and features a durable
stainless steel
construction. Direct
bolt-on upgrade for
other brands that use a
90° 1/16" NPT design.
Features an exclusive
titanium construction.
The “Straight-Shot”
configuration produces
excellent fuel atomization.
Direct upgrade for other
brands that use a 1/16"
NPT “annular
discharge” design.
Constructed from
durable stainless steel.
Nitrous only nozzle for
use with Electronic Fuel
Injection. Direct
upgrade for other
brands that use a 90°
1/16" NPT “dry” design.
Super Victor Kit #71852 with E3 titanium nozzles
SUPER VICTOR DIRECT PORT
NITROUS SYSTEMS
UNIVERSAL (100-500+ HORSEPOWER)
Our most sophisticated nitrous system allows you to tune each individual cylinder for superior performance!
Utilizing your choice of either Edelbrock E1, Edelbrock/Glidden E2 stainless steel, or E3 “Straight-Shot”
titanium nitrous nozzles, this is a direct port kit designed for serious competition with power increases of
200-500+ hp (V8 kits). They include Victor Pro Bottom Exit nitrous solenoids and Victor Pro fuel solenoids for
improved flow characteristics. Match with an Edelbrock Bottle Kit for maximum race-level performance with
the bottle/bracket combination you want. V8 kits include 56 stainless steel jets, 8 each of 7 sizes. Four
cylinder kits include 28 jets, 4 each of 7 sizes.
E1 Nozzle
E2 Nozzle
E3 Nozzle
Super Victor 8-cyl. Direct Port (200-300-400-500+ HP).......#71831 ...........#71850 ...........#71852
Super Victor 4-cyl. Direct Port (100-150-200-250+ HP).......#71836 ...........#71835...............N/A
Super Victor Kit #71848
FOR CUSTOM APPLICATIONS (100-500+ HORSEPOWER)
This kit includes E3 Nozzles, (2) Victor Pro N20 solenoids, (2) Performer fuel solenoids, billet distribution
blocks, hard line and hardware. For custom fabrication; consult your nitrous plumbing expert.
E3 Nozzle
Super Victor V8 Direct Port.................................................................................................#71848
CUSTOM PLUMBING KITS (200-500+ HORSEPOWER)
Custom Manifold V8 Plumb Kit #71853 with E2 nozzles
Developed with racers in mind, this kit contains the very basics for a direct port nitrous system installation
on an existing manifold. This kit is for racers who already have their wiring done, or who want to configure
their wiring to custom specifications. This helps keep the cost down while still giving you all of the
outstanding features of an Edelbrock Direct Port Nitrous Kit with either our stainless steel E2 nozzles or our
unique E3 titanium “Straight-Shot” nozzles. Supplied with 300 horsepower jetting.
• Victor Pro bottom exit nitrous solenoids for improved flow characteristics
• 1/16" NPT nozzle size for a compact installation
• Choice of E2 stainless steel or unique E3 titanium “Straight-Shot”
nozzles for better nitrous and fuel delivery
• Billet distribution blocks with hard lines for many different tight fit options
• 16 stainless steel jets for longevity and tighter tolerances (8 each of 2 sizes)
E2 Nozzle
E3 Nozzle
Custom Manifold V8 Plumb Kit (300 HP) .....................................................#71851 ...........#71853
184
All parts on this page are not legal for sale or use on pollution controlled motor vehicles.
NITROUS
PROGRESSIVE NITROUS CONTROLLER
The Edelbrock Nitrous Controller offers complete control over your nitrous system in a powerful and compact
package. Pulse width modulation regulates the amount of Nitrous being delivered over a specified period of
time by the nitrous and fuel solenoids. The digital display is easy to read and very simple to program, thanks
to touch switch programming. You have the ability to select and individually program the nitrous parameters
that you need in order to optimize traction, control your chassis and ramp up your nitrous system safely. The
end result leads to quicker ET’s and lessens the risk of engine and chassis abuse. The compact controller is
also great for automotive and motorcycle applications.
• Quicker ETs and less risk of
engine and chassis abuse
• Utilizes pulse width modulation to
regulate the amount of nitrous being
Progressive
delivered over specified time
Nitrous Controller #71900
• Select and individually program nitrous
parameters to optimize traction and
chassis control
• Full digital circuitry with
easy to read LCD display
• Integrated battery voltage monitor
• +12-volt timer output for auxiliary output
• Single or dual ramp adjustable
from 0 to 9.999 seconds
• Non-volatile data memory
NITROUS
retains your settings
MADE
• Complete with wiring
BETTER
harness and manual
• Epoxy potted for durability
Progressive Nitrous Controller ...........................................................................................#71900
ALUMINUM NITROUS BOTTLES
Edelbrock nitrous bottles are made of aluminum alloy, are D.O.T. approved and include an Edelbrock high-flow
CGA approved valve with a built-in siphon tube (unless noted otherwise) for consistent performance. In nine
sizes to suit any application, Edelbrock bottles are available polished to a high luster. They include a pressure
venting system to prevent pressure increases beyond the safety level. Note: All bottles are shipped empty.
Gauge
Dimensions
Silver
Polished
Capacity
Included
(len. x dia.)
Bottle
Bottle
2-lb. (un-siphoned) ...........................................No..........11-1/4" x 4-3/8"......#72360 .......#72460
10-lb. ..............................................................No .............20" x 6-7/8" .........#72300 .......#72400
Brackets #72600 for
10- and 15-lb bottles
BOTTLES WITH RACER SAFETY ADAPTER AND GAUGE
Gunmetal Gray Hinged Steel
Brackets #76204
10-lb. Polished
#72400
These nitrous bottles come with the Racer Safety Blow-Off Adapter and a liquid-filled nitrous pressure gauge
pre-installed. This is a popular item for the racing community since many associations require the use of a
Racer Safety Adapter if the bottle is installed in the passenger compartment.
10-lb. Silver Powder Coated Bottle (with Racer Safety Adapter & Liquid-filled Gauge) ............#72311
15-lb. Silver Powder Coated Bottle (with Racer Safety Adapter & Liquid-filled Gauge) ............#72315
Replacement pressure relief disks for (10, 12.5, 15 & 20 lb. bottles) (Qty. 1) ........................#72410
HINGED STEEL BRACKETS
Racer Safety Blow-Off
Adapter #72961 includes a
diffuser cap for safer handling
when bottle is not mounted
Nitrous Blow-Down Tube #72960
Powder coated and made of steel, these hinged brackets are designed for use with Edelbrock or other
brands of 10- and 15-lb., 7" diameter aluminum bottles. Includes rubber isolators to protect the finish.
Red Hinged Steel Brackets (for 10-lb. and 15-lb. aluminum bottles).......................................#72600
Gunmetal Gray Hinged Steel Brackets (for 10-lb. and 15-lb. aluminum bottles) .....................#76204
NITROUS BLOW-DOWN TUBE, RACER SAFETY
BLOW-OFF ADAPTER & SAFETY VALVE
CNC-machined Racer Safety Blow-Off Adapter replaces the standard safety valve to allow for the use of a
hard line blow-down tube. A blow-down tube safely vents nitrous outside the car should the safety blow. This
is an essential safety feature for hatchbacks or cars with the bottle mounted in the passenger compartment.
Nitrous Blow-Down Tube (22" long).....................................................................................#72960
Racer Safety Blow-Off Adapter (for use with Blow-Down Tube).............................................#72961
NITROUS BOTTLE HEATER
Nitrous Bottle Heater #72700
WWW.EDELBROCK.COM
Consistent bottle pressure (900-950 psi) is an important element for proper operation of your nitrous system.
The Edelbrock Nitrous Bottle Heater thermostatically raises the pressure when necessary by applying heat to
the bottle. Comes with all necessary hardware and includes velcro straps for quick and easy bottle removal.
Note: Not for use on carbon fiber bottles.
Bottle Heater - 12 volt (for 10-lb. and 15-lb. bottles) .............................................................#72700
All parts on this page are not legal for sale or use on pollution controlled motor vehicles.
185
POWER PKG KITS SUPERCHARGERS CRATE ENGINES CARBS & ACCESS. FUEL PUMPS GASKETS INSTALL ITEMS MANIFOLDS EFI HEADS CAMS & ACCESS. NITROUS WATER PUMPS ACCESS. EXHAUST SUSPENSION SHOCKS QWIKDATA2 INDEX
ACCESSORIES
INDEX QWIKDATA2 SHOCKS SUSPENSION EXHAUST ACCESS. WATER PUMPS NITROUS CAMS & ACCESS. HEADS EFI MANIFOLDS INSTALL ITEMS GASKETS FUEL PUMPS CARBS & ACCESS. CRATE ENGINES SUPERCHARGERS KITS POWER PKG
NITROUS
ACCESSORIES
PURGE VALVE KITS
Keeps the supply of fresh liquid nitrous at the solenoid(s) for instant and repeatable nitrous injection. This
purge kit bleeds accumulated nitrous vapor from the supply lines. Includes solenoid, activation switch, filter,
aircraft-quality fittings and wiring.
4AN Purge Valve Kit............................................................................................................#72176
6AN Purge Valve Kit............................................................................................................#72178
EDELBROCK SOLENOIDS
6AN Purge Valve Kit #72178
#72000
#72001
#72052
BOLT-ON SOLENOID BRACKETS
Billet aluminum, CNC-machined plate mounts four- and two-solenoid applications. Two-Solenoid kits can be
used with Performer and Performer RPM systems for a professional-looking installation. Match the foursolenoid brackets with our Performer RPM Dual-Stage, or Victor Jr. Plate System.
2-Soleniod
4-Soleniod
Bracket
Bracket
4500 Series carbs ......................................................................................#72288 ...........#72286
Square-flange (4150) carbs .......................................................................#72289 ...........#72287
Solenoid Adapter
(Required for Performer Solenoids when used with the above brackets)...............#72294 ...........#72294
Two-Solenoid
Bracket #72289
for squareflange carbs
#72279
#72281
#72284
Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They feature
a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil, a Teflon®
plunger for reliability and longevity, and a powder coated coil cover for durability and appearance. The Victor
Pro nitrous solenoid features a bottom outlet design that restricts flow much less then a standard designs. A
.115" internal metering orifice makes this our highest flowing nitrous solenoid. The Victor Pro fuel solenoid
features a shorter body with a smaller diameter stainless steel base for use where space is limited.
Nitrous Solenoids - Amp Draw: 9.2 amps @ 12.6 volts and 11 amps @ 13.8 volts
Performer Nitrous Solenoid (up to 150 HP with 1/8" NPT inlet & outlet) .................................#72000
Performer RPM Nitrous Solenoid (400+ HP with 1/4" NPT inlet & 1/8" NPT outlet).................#72001
Fuel Solenoids - Amp Draw: 1.29 amps @ 12.6 volts and 1.5 amps @ 13.8 volts
Performer Fuel Solenoid (up to 175 HP at 6 PSI with 1/8" NPT inlet & outlet)..........................#72050
Performer RPM Fuel Solenoid (400+ HP at 6 PSI with 1/4" NPT inlet & 1/8" NPT outlet) .........#72051
Victor Pro “Small Base” Fuel Solenoid (500+ HP at 6 PSI with 1/8" NPT inlet & outlet) .........#72052
#72280
SWITCHES AND BRACKETS
#72282
Designed especially for Edelbrock, Barry Grant and Holley carburetors, these kits include a snap-action
microswitch, mounting hardware and a CNC-machined, red anodized billet aluminum bracket. #72279
comes with a bendable universal bracket for easy installation.
Microswitch with Universal Bracket..................................................................................#72279
For Edelbrock Performer and Thunder Series AVS carburetors .........................................#72280
For Holley 4500 Series carburetors ...................................................................................#72281
For Holley standard-flange carburetors without choke (will not fit H.P. series)....................#72282
Holley HP Series Bracket Kit ..............................................................................................#72277
For Barry Grant Race Demon carburetors..........................................................................#72284
For Barry Grant King Demon carburetors ..........................................................................#72285
#72285
Lighted toggle
switch #72271
BOTTLE NUT COMBO
WRENCH #76504
This all-in-one wrench includes 3AN, 4AN, 6AN and 1-1/4"
for easy bottle nut and supply line removal.
186
Covered toggle
switch #72272
Miniature lighted
rocker switch #72273
Push button
switch #72274
REPLACEMENT JETS
Jets are available individually or in packs of 8. To order individually
packed jets, add the jet size desired to #73 (#73014 is a .014" jet).
Individual Taper Face Jets
(Last 3 digits indicate size, .014" thru .120") ................#73014 thru #73120
Packs of 8 Taper Face Jets
(Last 2 digits indicate size, .018" thru .048") ................#73218 thru #73248
Individual Taper Face Jets (Undrilled blank)...................................#73013
All parts on this page are not legal for sale or use on pollution controlled motor vehicles.
Precision CNCmachined stainless
steel jets won’t
erode like brass jets