Sharp AQUOS LC-32D47UT Operating instructions

AQUOS
SHAI' R
LC-32D47UT
LIQUID CRYSTAL
TELEVISION
H_II'IIII
IT! DOLBY
DIGITAL
Hle_EH_ITIONTEF_VlSlO_
1245
Supplied
NYCE
I
TM
HIGH-DEFINITION
MUlTIMEdIAINTERFACE
IMPORTANT:Please
read thisoperating
operation the
manual
before starting
equipment.
Accessories
Make sure the following accessories
Remote control unit
(× 1)
Page 8
are provided with the product.
"AA" size battery
(×2)
Page 9
AC cord
(× 1)
Page 8
Stand unit
(× 1)
Page 7
Operation manual
(×3 languages)
, Always use the AC cord supplied with the TV.
cleaning
cloths
are available
directly
from Sharp
in single (00Z-LCD-CLOTH)
or triple (00Z-LCDTo avoid scratching
the 1-800-BE-SHARP
frame or screen,
please
use a or
soft,VISIT
lint www.sharpusa.com/SharpDirect.
free cloth for cleaning.
Approved
CLOTH-3)
packs.
Call
for ordering,
1
IMPORTANT:
Model No.:
To aid reporting in case of loss or theft, please record
the TV's model and serial numbers in the space
provided. The numbers are located at the rear of the TM.
Serial No.:
IMPORTANT
WARNING:
INFORMATION
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of
[___lljIIIII[e]_I
RISK OF ELECTRIC SHOCK
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
CAUTION:
TO REDUCE
THE RISK
OF ELECTRIC
SHOCK,
The exclamation point within a
triangle is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions
in the
DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING
TO QUALIFIED
SERVICE
PERSONNEL.
literature
product.
CAUTION:
TO PREVENT
ELECTRIC
SLOT,
INSERT.
FULLY
SHOCK,
MATCH
WIDE
BLADE
accompanying
OF PLUG
the
TO WIDE
WARNING:
FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user's authority
to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic
interference with electric
appliances such as radios and televisions, use shielded cables and connectors
for connections.
Printed in Mexico
TINS-E254WJZZ
09P06-MX-NM
IMPORTANT INFORMATION
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32D47UT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
"Note
to CATV
system
installer:
National
Electrical
Code
that
be connected
to the grounding
This
provides
system
reminder
is
provided
to call
the
CATV
guidelines
for proper
grounding
of the building,
as close to the
and,
point
system
installer's
attention
to Article
in particular,
specifies
that the
of cable
entry
as practical."
cable
820-40
of the
ground
shall
This product utilizes tin-lead solder, and fluorescent
lamp
containing
a small amount of mercury. Disposal of these
materials may be regulated due to environmental
considerations.
For disposal or recycling information,
please contact your local
authorities,
the Electronic Industries Alliance: www.eiae.org,
the
lamp recycling organization:
www.lamprecycle.org
or
Sharp at 1-800-BE-SHARP
(For U.S.A. only)
Trademarks
° Dolby
anufactured
Laboratories.
under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
I
° HDMI
HDMI,Licensing
the HDMILLC."
logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
I
, energy
roductsefficiency.
that have earned the ENERGY STAR"_are designed to protect the environment through superior
I
DEAR
SHARP
CUSTOMER
Thank you for your purchase
of the Sharp
of trouble-free
operation
of your product,
using this product,
IMPORTANT
Liquid Crystal Television.
p_ease read the important
SAFETY
To ensure
safety and many years
Safety instructions
careful}y
before
INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional
Safety Information
15) Power Sources--This
product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16) Overloading--Do
not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry--Never
push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service--Unplug
this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts--When
replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics
as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check-- Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting--When
mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended
by the manufacturer.
iMPORTANT
SAFETY iNSTRUCTiONS
• Outdoor Antenna Grounding -- If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding o1the
mast and supporting structure, grounding of the leadqn wire
to an antenna discharge unit, size ot grounding conductors,
location ot antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE
NATIONAL
OF ANTENNA
ELECTRICAL
GROUNDING
AS PER
CODE, ANSVNFPA
70
ELECTRODE
(NEC
NEC
--
NATIONAL
ART
SYSTEM
250,
PART
ELECTRICAL
H}
CODE
• Turn off the main power and unplug the AC cord from the wall outlet betore handling.
• Use a sott cloth and gently wipe the surface of the display panel. Using a hard cloth may
scratch the panel suriace.
• Use a sott damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel suriace when wiped strongly.)
• If the panel is dusty, use an anti static brush, which is commercially available, to clean it.
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage the
panel surface.
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.
• Water and Moisture -- Do not use this product near water tot example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand -- Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall,
be sure to follow the manutacturer's instructions. Use only the mounting hardware recommended by the manutacturer.
• Selecting the location -- Select a place with no direct sunlight and good ventilation.
• Ventilation -- The vents and other openings in the cabinet are designed tor ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the
product on a bed, sota, rug or other similar surface, since they can block ventilation openings. This product is not designed
tor built in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation
is provided or the mandiacturer's instructions are tollowed.
• The Liquid Crystal panel used in this product is made ot glass. Theretore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat -- The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 1,049,088 plxels, giving you fine picture details.
Occasionally, a tew non active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this
does not affect the periormance ot your product.
• Lightning -- For added protection for this television equipment during a lightning storm, or when it is lett unattended and
unused tor long periods ot time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power line surges.
• Power Lines -- An outside antenna system should net be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can tall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• To prevent fire, never place any type ot candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture tor a long time, as this could cause an atterlmage to remain.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may
result in fire or electric shock. Exercise special caution when using the product around children.
Precautions when transporting
the TV
, When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry
the TV by two people holding itwith two hands -- one hand on each side of the TV.
iMPORTANT
Congratulations
SAFETY iNSTRUCTiONS
on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE
ISSUE
o The home theater entertainment experience is a growing trend and larger fiat panel
displays are popular purchases. However, fiat panel displays are not always supported
on the proper stands or instalbd according to the manutacturer's recommendations.
o Fiat panel displays that are inappropriately situated on dressers, bookcases, shelves,
desks, speakers, chests or carts may fall over and cause injury.
THiS
MANUFACTURER
CARES!
o The consumer electronics industry is committed to making home entertainment enjoyable
and sate.
TUNE iNTO SAFETY
o One size does NOT fit all. Follow the manufacturer's recommendations for the sate
installation and use of your fiat panel display.
o Caretully read and understand all enclosed instructions tot proper use et this product.
o Don't allow children to climb on or play with furniture and television sets.
o Don't place flat panel displays on furniture that can easily be used as steps, such as
a chest et drawers.
o Remember that children can become excited while watching a program, especially
on a "larger than life" flat panel display. Care should be taken to place or install the
display where it cannot be pushed, pulled over, or knocked down.
o Care should be taken to route all cords and cables connected to the flat panel
display so that they cannot be pulled or grabbed by curious children.
WALL
MOUNTING:
IF YOU
DECIDE
TO WALL
MOUNT
YOUR
FLAT
PANEL DISPLAY, ALWAYS:
o Use a mount that has been recommended by the display manutacturer and/or listed
by an independent laboratory (such as UL, CSA, ETL).
o Follow all instructions supplied by the display and wall mount manufacturers.
o If you have any doubts about your ability to safely install your flat panel display,
contact your retailer about professional installation.
o Make sure that the wall where you are mounting the display is appropriate. Some
wall mounts are not designed to be mounted to walls with steel studs or old cinder
block construction. If you are unsure, contact a professional installer.
o A minimum of two people are required tot installation. Flat panel displays can be
heavy.
Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.
consumer electronics industry. More than 2,200 companies enjoy the benefits d CEA
membership, including legislative advocacy, market research, technical training and education,
industry promotion and the tostering of business and strategic relationships.
QUICK REFERENCE
"
o Before attaching (or detaching) the stand, unplug the AC
cord from the AC INPUT terminal.
o Before pedorming work spread cushioning over the base
area to lay the TV on. This will prevent it from being
damaged.
® Attach the stand in the correct direction.
® Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
® Be sure to follow the instructions. Incorrect
installation of the stand may result in the TV falling
over.
Confirm that there are 4 screws
stand unit.
supplied
with
|"
_l
J"
_Lo
, This iV should be mounted on the wall only with the
AN-37AG5 (SHARP) wall mount bracket. The use of
other wall mount brackets may result in an unstable
installation and may cause serious injuries.
, installing the TV requires special skill that should
only be performed by qualified service personnel.
Customers
should not attempt to do the work
themselves. SHARP bears no responsibility
for
improper mounting or mounting that results in
accident or injury.
Using
1
•
the
an optional
bracket
You can ask a qualified
using an optional
TV to the wall.
service
AN-37AG5
to mount
the
professional
bracket
TV
about
to mount
the
* Carefully read the instructions
that corne with the
bracket before beginning work.
2
(_) Insert the stand into the openings
of the TV.
on the bottom
o Be sure to attach the stand to the TV with the wider
side d the base facing torward.
(_) Insert and tighten the 4 screws into the 4 holes
on the bottom of the stand.
f
Hanging
on the wall
AN_37AG5 wall mount bracket.
(See the bracket instructions
for details.)
Soft cushion
Vertical
About
mounting
setting
0/5/10/15/20
Angular
mounting
the "IV angle
°
o The center of the display:
s/16 inch (7.5 mm) above
the "A" position.
Refer to the operation
manual of AN-37AG5
details.
for
o To detach the stand, perform the steps in reverse order.
o Detach the cable clamp on the rear of the TV when using
the optional mount bracket.
o Due to the terminal configuration on this TV, when you
waBmount this model, make sure there is enough space
between the wall and the TV for the cables.
o To use this TV mounted on a wall, first remove the adhesive
tape at the 4 locations on the rear of the TV, and then use
the screws supplied with the wall mount bracket to secure
the bracket to the rear of the TV.
QUICK
REFERENCE
•
•
•
•
=
•
-
= -
•
-
•
•
1
Attach your antenna to the back of the tebvision.
(See page 9.)
Use the remote contrd unit by pointing it towards the
remote control sensor on the TV. Objects between the
2
Connect
outlet,
remote control unit and the remote
prevent proper operation.
the AC plug for the television
into the AC
control sensor
may
o Place the TV close to the AC outlet, and keep the power
plug within reach.
® TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED
PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3
How
to turn on the television
A) Press POWER
J[
B) The POWER
television
for the first time.
on the television.
_POWER
indicator
[] Cautions
regarding
the
remote
control
unit
o Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
o Do not install or place the remote control unit under direct
sunlight. The heat may cause detormation of the remote
control unit.
o The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
on the front of the
lights GREEN.
]
POWER
indicator
IMPORTANT:
The POWER indicator on the television should light GREEN
indicating you have power to the television.
If the POWER indicator on the television still does not light up,
press POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1 800 BE-SHARP.
o Speakers cannot be detached from the TV.
o TV angle cannot be adjusted.
Preparation
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable
plug it into the antenna terminal at the rear of the TV set.
1. A 75 ohm system is generally a round cable with F type connector
_
that can easily be attached to a terminal without tools (Commercially
available).
F-type
connector
When connecting
the RF cable
connector with tools.
should
If tools are used, it may cause damage
of internal circuit, etc.)
Connecting
• C.....
Antenna
,the
only,
F4ype
to your TV set. (The breaking
75-ohm coaxial cable
Cable
ant ......
d) Cable without
"_
75 ohm coaxial cable (round)
300 ohm twinqead cable (flat)
be finger-tightened
to tile TV set, do not tighten
F-type connector
_
2. A 300 ohm system is a flat "twinqead" cable that can be attached
to a 75 ohm terminal through a 300/75 ohm adapter (Commercially
available).
_
of tile types of connections
with an F-type connector,
ble to the TV using ....
a CATV
............
f the methods._._--...
!ntoheni)lustrati .....
",
hewn (._1), (2), /3' er ._jh}.
t_,rl_m)_.
_
1
(commercially
(3
Combination
VHF/
available)le)_
"_/_
|
UHF antenna
_4_' Separate VHF/UHF
ant
....
If the remote
UHF
*"_=
V_TFENNAANTENNA
control fails to operate
I Open the battery cover.
......
I
_, .........
TV functions,
"_
replace
_
the batteries
[
J
in the remote
2 Insert two "AA" size batteries
(supplied with the product).
..........
_IQ?
control
I
E
I
unit.
3 Close the battery
cover.
, Place the batteries with their terminals
corresponding
to the (
) and (-)
indications in the battery compartment.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
, Do not mix batteries of different types. Different types ot batteries have different characteristics.
, Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage
in old batteries.
, Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a
rash. If you find any chemical leakage, wipe thoroughly with a cloth.
, The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
, Ifyou will not be using the remote control unit tot an extended period ot time, remove batteries trom it.
9
Part Names
i
emot
....tro,
......
i/
h
JJl I I / [
oPc.......*<Seepage18._
/
Z _
$ $ PC_.owE.,nd,cater
<See
page1%
°.....
*OPC: Optical Picture Control
......
iiiiiiii
iiiiiiiii
......
J
_
!_
POWER
_
batten
*3
i
_i_MENU
mm
az batten
I_
AC INPUT
_iiiilli_iiiiii_iiiii_ii_ii_
m
_
terminal
.1
--Channel
battens
INPUT 6 terminal
(CH/X/V)
H_mu
.
Volume
buttons
DI ITA AUD
(HDMI)
OUTPUT terminal
(VOL+/-)
AUDIO OUTPUT
terminals
_,, ._M
- INPUT7
terminal
(HDMI)
®
VIDEO
®t
-_NPUT3
AUDIO
INPUT 2 terminals
terrninals
®_
INPUT 4 terminal (PC IN)
SERVICE
[_
-"1
*2
*3
*4
See
See
See
See
page
page
page
page
--AUDIO
_ SERVICE
terminal
--
terminal (shared for INPUT 4 and INPUT 5) *4
INPUT 5 terminal (HDMI)
11 for external equipment connection.
17 for button operations.
8 for connecting the AC cord.
21 for details on the PC Audio Select function.
o The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
10
Connecting
to E×ternal Equipment
You can connect many types of external equipment to your TV like a Blu-ray disc player, DVD player, VCR, Digital
TV tuner, HDMI equipment,
game console or camcorder.
To view external source images, select tile input source
from INPUT on the remote control unit or on the TV. (See page 15.)
o To protect eqopment, always tam off the TV before connecting any external equipment.
o Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting
Terminal
a Blu-ray disc player, DVD player, Digital rv STB (Air or Cable), VCR, game
on the TV
INPUT 3
INPUT
console
or eameorder
Terminal on external
equipment
Cable
WDEO Aunno
® _®
.®
1 or 2
COMPONENT
AV cable (commercially
available)
®
L®®_
WDEO
AuDno
AUDIO
p_® R®
Component
_®
Audk)
video
4.'able (commercially
cable
(commercially
®®
available)
CO_,PONENT
_® ®_
available)
AUOIO
S-VIDEO
INPUT2
AUOIO
S-VIDEO
©_®n®
INPUT 5, 6 or 7
Audk)
cable
cable
(commercially
(commercially
available)
available)
S-VIDEO
AUDIO
H_m!
HDMI-certified
(.'able (commercially
*2
available)
H_ml
DIGITAL AUDIO
OUTPUT
Ii .....
il
.........
: DIGnrAL
OUTPUT
q_:_
Optical
fiber
cable
(...........
ially available)
_:_
*3
DIGITAL
AUDIO
INPUT
AUDIO OUTPUT
R-AUDIO-
Audio
cable
(commercially
,® ®_
available)
®®
AUDIO
INPUI
"1 • The Component terminals take priority over the S VIDEO (INPUT 2) terminal.
•2 o When using an HDMI DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5. When you input the audio
signal via the AUDIO terminal with INPUT 5, set "PC Audio Select" to "Input 5 (HDMI)". (See page 21 .)
•3 o Digital audio can only be output when receiving a digital broadcast.
Connecting
a PC
Terminal on the TV
INPUT
4
ANA
_
RGB
Terminal on PC
Cable
AUDIO
RGB cable
(commercially
available)
ANAOG
RGB
O 3.5 mm stere()
minijack
cable
(commercially
available)
®
AUDIO
INPUT 5, 6 or 7
Hii:::lml
HDMI-certified
cable
(commercially
available)
M_mll
o
o
o
o
When connecting a PC to the INPUT 4,
When connecting a PC to the INPUT 5,
The HDMI terminals only support digital
Refer to page 30 for a list of PC signals
set "PC Audio Select" to "Input 4 (PC)". (See page 21 ,)
set "PC Audio Select" to "Input 5 (HDMI)". (See page 21.)
signal.
compatible with the TV.
11
Watching
TV
Press POWER
on tile TV or oil the remote
control
unit to turn the
power on.
o The POWER indicator (Green): The TV is on. (After a few seconds, a window
appears with sound.)
o The initial setup starts when the TV powers on for the first time. if the TV has
been turned on before, the initial setup will not be invoked. For changing the
settings of the initial setup, perform E7 setup on the Setup menu on page 20.
Press POWER on the TV or on the remote control unit again to turn the
power off.
o The TV enters standby and the image on the screen disappears.
o The POWER indicator on the TV turns of/.
POWER
(On/Standby)
o if you are not going to use this TV for a long period d time, be sure to remove
the AC cord from the AC outlet.
o Weak electric power is still consumed even when the TV is turned of/.
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels available
in the region where you live. Perform the following steps
o ENERGY STAR qualifbation is based on AV MODE "STANDARD".
before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.}
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Air/Cable (Antenna setting}
Make sure what kind of connection is made with your TV
when sebcting "Air" or "Cable".
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1 Press A/_' to select the desired language listed on
the screen, and then press ENTER.
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewabb in the set area.
3
4
Press A/Y
to select "Air" or "(}able",
press ENTER.
and then
S_0After "Air/Cable"
has been set, "CH Search"
highlighted.
Press ENTER.
is
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifies for ENERGY STAR V3.0
in Home mode default setting.
2 Press A/Y
to select "Home" or "Store", and then
press ENTER.
Press A/_" to select "Analog & Digital" to search
both analog and digital broadcasts
or "Digital"
to search only digital broadcasts
or "Analog" to
search only analog
ENTER.
Press A/_'
ENTER.
Home:
"Power
Saving"
set to "STANDARD".
is set to "Of/",
Store:
is set to "Off"
"Power
to "DYNAMIC
can be set.
Saving"
(Fixed)".
Picture
and
and
Reset
AV MODE
AV MODE
and
Feature
broadcasts,
and then press
to select "Yes", and then press
is
is set
Demo
Picture
Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Oft". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature
Demo: When "On" is selected, after all the settings are
completed,
the Feature Demo screen is displayed if there is
no operation for several minutes.
• The Channel search will start automatically.
o If no channel
with your TV
o For changing
setup on the
12
is found, confirm the type of connection made
and try E7 Setup again. (See page 20.)
the settings of the initial setup, perform EZ
Setup menu on page 20.
Direct Button
Operation
You can change the volume by pressing
the TV or on the remote control unR.
VOL +/-
on
o To increase the volume, press VOL+.
o To decrease the volume, press VOL-.
Audio
status
, When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
I
_
_f601
o See page 25 for details on the Output Select function.
Mutes the current sound output.
Press MUTE.
o ,,:_ ,,will be displayed on the screen for 30 minutes, and
the sound is silenced.
You can turn on the TV or put it on standby by
pressing POWER on the TV or on the remote control
unit. (See page 12.)
You can change
0-9,
channels
by pressing
CH/VV
o Within 30 minutes of pressing MUTE, mute can be
canceled by pressing VOL+/or MUTE.
o Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
or
* (DOT).
Allows you to set a time when
switches to standby.
Press SLEEP.
Examples:
TO select a t or 2-digit channel number
Press 5 _ ENT.
To select a 3-digit channel number (e.
Press 1 _
1_
5_
ENT.
To select a 4-digit channel number (e.
Press 2 _ 2
_ ®(DOT)
_ 1
(e. g., Channel 5}:
the TV automatically
g., Channel 115):
o The remaining time displays when the sleep timer has been
set.
g., Channem22.1):
_ ENT.
o Each time you press SLEEP, the remaining time switches
as shown below.
0ff"_30_60"_90"_120
t
!
o When set, the time automatically starts counting down.
o If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
o When it is 5 minutes before the time expires, the remaining
time will start to keep appearing every minute.
, When selecting a 1 digR channel number, it is not necessary
to press 0 before the number.
, When you enter 0_9 only, channel selection will be made if
there is no operation within a few seconds.
, Ifyou push "0" by itself, nothing will happen.
, Complete the above steps within a few seconds.
, When you enter (F9 and • (DOT), channel sebction will be
made if there is no operation within a few seconds.
o Select "Off" by pressing SLEEP to cancel the sleep timer.
o The TV will enter standby when the remaining time reaches
0.
You can select 4 preset favorite channels in 4 different
categories.
Press A, B, C or D.
, While watching the TV, you can toggle the selected
channels by pressing A, B, C and D.
Press FLASHBACK
channek
Press FLASHBACK
tuned channel.
to switch
to the previously
tuned
again to switch back to the currently
, See page 26 for details of favorite channel settings.
FLASHBACK will not work if no channel has been changed
after the TV is turned on.
13
Direct
Button
_,'_i _
"_
Operation
_
•
....
[] MTS/SAP
AV MODE gives you several viewing options to choose
from to best match the surrounding
environment
of the
TV, which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
atereo
mode
The TV has a feature
that allows
reception
of sound
other than the main audio for the program. This feature
is called Multi-channel
Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast
other
Press AV MODE. Current AV MODE displays.
o Press AV MODE again before the mode displayed on the
screen disappears. The mode changes as shown below:
information, which could
or something corrlpletely
information.
be audio in another language
different like weather
Example:
You can enjoy Hi-Fi stereo
where available.
When the input source is TV, INPUT 1, 2 or 3
terminals
SI_,NDARD _ MOVIE _GAME _ USER [TVI
!
!
DYNAMIC L
DYNAMIC (Fixed)
Example:
When the input source is INPUT 4, 5, 6 or 7
terminals
SI_,NDARD _
i
DYNAMIC _
MOVIE _
GAM E_
DYNAMIC (Fixed)_
PC
!
USER[,..P]
You can change MTS as shown below to match the television
broadcast signal.
Press
AUDIO
to toggle
STEREO
+ SAP
r_lode:
[] Digital
broadcasting
audio
modes.
MTS and
MONO
S_[(SAP)
t
_
MAIN + SAP mode: MAIN
MONO
mode: MONO
._
SAP
SAP(ST)._
MONO
w
SAP
audio
mode
The types of audio transmitted
in a digital broadcast
include SURROUND as well as MONO and STEREO.
In addition,
accompany
it is possible for multiple
a single video track.
audio tracks
to
Press AUDIO to toggle between audio modes.
Example:
Audio1:
_
when
STEREO
Audio3:
receiving
,m
Digital
Audio2:
broadcasting
STEREO
SURROUND
to PC mode.
o MTS one/operates
information
between
Examples:
when
receiving
STEREO
r_lode: S_[EREO_
o You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
o When you play games, "GAME" is recommended for AV
MODE.
Displays channel
Press DISPLAY.
or SAP broadcasts
o Obtain a clearer sound by manually swKching to fked
alono sound mode.
STANDARD: For a highly ddFned image in a normal
lightFng.
MOVIE: For a movie.
GAME: Lowers image brightness tot easier viewing.
PC: For PC.
USER: Allows the user to customize settings as desired.
You can set the mode for each input source.
DYNAMIC (Fixed): Changes the image and sound
settings to the tactory preset values. No adjustments
are allowed.
DYNAMIC: For a clear-cut image emphasizing high
contrast, useful for sports viewing.
Allows you to gain quick access
Press PC.
sound
, Stereo broadcasts: View programs like live sporting
events, shows and concerts in dynamic stereo sound.
, SAP broadcasts:
Receive TV broadcasts in either MAIN or
SAP sound. MAIN sound: The normal program soundtrack
(either in mono or stereo). SAP sound: Listen to a second
language, supplementary commentary or other information.
(SAP is mono sound.)
If stereo sound is difficult to hear.
while in TV mode.
being viewed.
Allows you to capture
you are watching.
Press FREEZE.
and freeze
a moving
image that
o A moving image is captured.
o Press FREEZE again to cancel the function.
o When this function is not available, "No displaying still image
available." will display.
o The still image automatically goes out after 30 minutes.
o If you are using the freeze function and a broadcast
activates the V CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
14
Direct
Button
Operation
To view external source images, select the input sourc, e
using INPUT on the remote control unit or on the TV.
1 Press iNPUT.
2
1
Press CC.
, This will present the Closed Caption intormation display.
2
Press CC while the Closed
still on the screen.
Caption
information
is
, Press repeatedly until you select the desired closed
caption service.
, A list of sebctabb sources appears.
Press INPUT again or press A/_'
to select the
input source.
, An image trom the selected source automatically displays.
, Each time INPUT is pressed, the input source toggles.
, If the corresponding input isnot plugged in, you cannot change
the input. Be sure to connect the equipment betorehand.
intormation
, See page 11 for external equipment connection.
, Press pC to switch to an image trom the PC.
, Regardless ot whether or not an analog broadcast
provides Closed Caption service, the closed caption
display will toggle in the sequence: CC1, CC2, Tt, and
T2.
, When a digital broadcast provides Closed Caption
service, the closed caption display will toggle in the
sequence: DTVCC (actual service), CC1, CC2, Tt, and
T2. CCt, CC2, Tt, and T2 are always displayed.
You can operate the on-screen
display menu by using
the following buttons.
MENU: Displays the menu screen.
A/Y/_1/1_,
ENTER: Select a desired item on the screen.
RETURN:
Returns to the previous menu screen.
EXIT: Turns off the menu screen.
Example:
If a program has three services (DTVCC, CC1 and T1
(TEXTt)), the closed caption display will toggle in this
sequence:
, For operating the on screen display menu, see "Menu
Operation Buttons" on page 17.
t/5
l
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the
discretion
of the service provider). It is a more flexible
system than the original Closed Caption system,
because it allows for a variety of caption sizes and font
styles. When the Digital Closed Caption service is in
use, it will be indicated by the appearance
of DTVCC.
and VHS videotapes
captions. Please look for the "[_]"
that captions will be shown.
2/5
OOt
_
3/5
002
'_"
4/5
Tt
'_
5/5
T2
'_Y
OFF
I
Examples:
hl a case where there are two cbsed caption services
provided (tor instance, DTVCC and CC1), and DTVCC
is displayed as your current selection, if DTVCC is not
broadcast for the next program, the other closed caption
service, CC1, will be displayed.
offer closed
symbol
to ensure
, When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears on the channel
intormation window. See page 19 for details of Power
Saving settings.
" See page 25 for detailed closed caption settings.
, When the program contains no closed caption, " " displays
in the closed caption information. (Only when receiving a
digital broadcast.)
, Four kinds of closed caption service (CC1, CC2, Tt (T_T1),
T2 (TEXT2)) are potentially available, but a broadcast
may contain none or only some ot these services at the
discretion of the program provider.
In the Closed Caption system, there can be more than
one caption service provided.
Each is identified by its
own number. The "CC1" and "CC2" services display
subtitles of TV programs superimposed
over the
program's
picture.
In the Closed Caption system, the "T1 (TEXT1)" or "T2
{TEXT2)" services display text that is unrelated to the
program being viewed (e.g., weather or news). These
services are also superimposed
currently being viewed.
_
, The CC button keeps a record of the last service
selected in its memory.
Ifthe last closed caption mode (e.g. 1/5 DTVCC) you
selected is not available tor the next program, or on
another channel, the closed caption service that is
available is automatically selected.
Closed Caption services that appear in parentheses will
not be stored in the CO button's memory as your last
selected service. Only services that you have selected
with the CO button are stored.
Your TV is equipped with an internal Closed Caption
decoder.
It allows you to vies7 conversations,
narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs
and on
some VHS home video tapes at the discretion of the
program provider.
Not all programs
IDTVCCt
over the program
15
Direct
Button
Operation
You can select the screen size.
1
PressVlEW
MODE.
o The View Mode menu displays.
o The menu lists the View Mode options sebctabb
2
for the type of video signal currently being received.
Press VIEW MODE or A/Y
while the View Mode menu is displayed
• You can sequentially select a View Mode that has its own aspect ratio.
to select a desired
item on the menu.
[] For 4:3 programs
Example:
Screen
size
images
Side Bar
S.Stretch
Suitabb for viewing
conventbnal 4:3 programs in
their normal format.
(Smart
Zoom
stretch}
Suitable for stretching 4:3
programs to fill the screen.
Stretch
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
This mode isuseful _0r 1.78:1
DVDs.When viewi% 1.85:1
DVDs, stretch modewill still show
very thin black bands at the top
and bottom of the screen.
[] For HD programs
Stretch: Suitable tot viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at
the top and bottom ot the screen.
Full Screen: Displays an image taithful to the input signal in full screen.
S.Stretch (Smart stretch)= Suitable. tot stretching 4:3 programs to fill the screen.
Zoom: Suitable for viewing wide screen 2.35:1 aspect ratio programs in full screen.
o When using Full Screen, it is possible to see noise or bars around difterent outer portions ot the screen. Please change view
mode to correct this.
[] For PC input mode
o Connect the PC before making adjustments. (See page 11 .)
o Sebctabb screen size may vary with input signal type.
Example:
Screen
Input signal
size
images
Normal
Zoom
Stretch
Dot by Dot
ro-i [-Cq Cb E!
4:3
Keeps the original
aspect ratio in a full
screen display.
For viewing
widescreen
programs. The top
and bottom et the
image is cropped.
Input signal
Stretch
©
©
16:9
An image tally tills the
screen.
Dot by Dot
Detects the reaolu[ion
of the signal and
displays an image with
the same number of
pixels on the screen.
16
An image fully fills the
screen.
Detects the resolution
of the signal and
dispbys an imagewith
the same number of
I pixeb on the screen.
On-Screen
Display
Menu
"
Wr
Example
ih,
Example
Audio
Only
®
®
Item displayed
in yellow
o This indicates the item currently selected.
o Press ENTER to go to the adjustment screen for this
item.
Tr_he
bar above
the remote
is an operational
control.
The bar will change
[. accordance
with
1
Press
to display
2
(!) Press
MENU
_/_
each menu setting
the MENU
in
|
screen.
Item displayed in gray
o This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, bat the main reasons are as follows:
--Nothing is connected to the selected input terminal.
--The function is not compatible with the current input
signal.
J
screen.
to select the desired
(_) Press ,&/V to select a specific
and then press ENTER.
Item displayed in white
• This indicates that the item can be selected.
|"1
guide for
menu.
adjustment
item,
13_ Press A/Y
(or 4/_)
to select or adjust the
desired setting, and then press ENTER.
3
Press
MENU
o Menu options differ in the selected input modes, but the
operating procedures are the same.
o The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightS/from the actual screens.
to exit.
n
Using
the
remote
iiiii_,,
control
Use the following buttons
operate the menu.
Using
on the remote
control
to
the
control
panel
You can also operate
of the main unit.
of the main
unit
the menu with the control panel
Button operations
on the control panel correspond
the ones on the remote control as shown below.
to
control.
INPUT: ENTER on the remote
control
MENU:
Press to open or close the menu screen.
_,/Y/_I/I_:
Press to select a desired item on the screen or
adjust a selected item.
ENTER:
Press to go to the next step or complete the
setting.
RETURN:
Press to return to the previous step.
CNik/Vz
_
17
Cursor A/T on the
remote control.
VOL +/-:Cursor
41/1_ on the
remote control.
MENU: MENU on the remote
On-Screen
Adjusts
the
DispJay Menu
picture
following
picture
Example
J _
I
to your
preference
with
This TV provides various advanced
optimizing the picture quality.
the
functions
for
settings.
Picture
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation:
Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
o For resetting all adjustment items to the factory preset
values, press A/_F to select "Reset", and then press
ENTER.
Backlight
The screen dims
Contrast
For less contrast
The screen
brightens
For more contrast
Brightness
Color
For less
brightness
For less color
For more
brightness
For more color
Tint
intensity
Skin tones
intensity
Skin tones
Sharpness
become reddish
For less
sharpness
become greenish
For more
sharpness
For a better
correction.
High:
white balance,
use color temperature
White with bluish tone
Middle:
Mid-High:
Mid-Low:
Low:
White with reddish tone
Automatically
adjusts the irrlage contrast according
the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
For resetting all Pbture adjustment items to the factory
preset values, press j,/T to select "Reset", press ENTER,
press A/_' to select "Yes", and then press ENTER.
to
Automatically
adjusts the brightness of the screen.
On(Display}: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On: Automatically adjusts.
Off: The brightness is fixed at the value set in "Baoklight".
Automatically
detects a film-based source (originally
encoded at 24 frames/second),
analyzes it then
recreates each still film frame for high-definition
picture
quality.
On: Detects, analyzes, converts film soume.
Off: Normal viewing mode.
yCf_ ,
' _£#I',_,f
o When set to "On", the Optical Picture Control (OPC) senses
the surrounding light and automatically adjusts the backlight
brightness. Make sure nothing obstnJcts the OPC sensor,
which could affect its ability to sense surrounding light.
o When set to "On(Display)", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
o "Film Mode" is not selectable when channel display shows
an input resolution of 480p or 720p.
B_
Produces a clearer video image.
Off: No adjustment
High/Middle/Low:
Select a desired level for viewing a
clearer video image.
Provides high quality images with minimal
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off: For Game Mode.
dot crawl
o 3D Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
18
On-Screen
Display Menu
_i_!_!_iiiiiii_i_ii!i_i_i_i_i_i_i_i_ii;:i;;_i;i_;!i_i_!_i_i_!i_!_!_!_;i_i_i!i_i_!i!i
¸i_!i_!_i_i_iiiii_i!_!!!i_i_i_i_i!_!i_i_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_!_!_!_i!!!!!!!_!!_!_!_!_!_
¸_!!i!!i!!i!!i!!i!!i!!i!!i!_!i!ii!ii!ii!ii!ii!ii!ii!i_!!!!_!_!_!_!_i!_!_!_!!_!!_!_!_!i_!i_
For viewing a video in monochrome.
On." For viewing in monochrome.
Off: Normal color.
This function allows you to enjoy bass-enhanced
On: Bass Enhancer function is on.
Off: Normal sound.
sound.
Audio menu is grayed out when Output Select is set to
"Variable". (See page 25.)
The brightness
level range of the OPC sensor's
automatic adjustments
can be set according to your
preferences.
The adjustment
range of the OPC sensor can be set to
a maximum of +16 and a minimum of-16.
Power
Max.: -15 through +16
Min.: 16through +15
control setting
Example
[ _
allows
you to save energy.
Power Control
L
o The maximum setting cannot be set to a smaller number
than the minimum setting.
o The minimum setting cannot be set to a bigger number
than the maximum setting.
o Depending on the brightness of the surrounding light, the
OPC sensor might not operate ifthe adjustment range is
small.
!
•
=
You can adjust the sound quality
with the following settings.
Example
This function allows you to automatically
reduce the
backlight brightness in order to decrease the power
consumption
and increase the backlight lifespan.
Standards Reduces the bacMght brightness to 80%.
When set to "Standard", "_'/_" appears on the screen.
Advanced: Reduces the backlight brightness to 70%.
When set te "Advanced", ,,_i,,
appears on the
screen.
to your preference
I (_ Audio
Off: The backlight brightness is the same value of your
settings in the selected AV MODE.
Treble
For weaker treble
For stronger treble
Bass
Balance
For weaker bass
Decrease audio
from the right
speaker
For stronger bass
Decrease audio
from the left
speaker
"Power Saving" does net function when you set "AV MODE"
to "DYNAMIC (Fixed)".
When "OPC" is set to "On(Display)" or "On" while "Power
Saving" is set to "Standard" or "Advanced", the Power
Saving leaf icon appears to the lett ot "OPC" in the Picture
menu screen.
When "OPC" is set to "Off" while "Power Saving" is set
to "Standard" or "Advanced", the Power Saving leaf icon
appears to the lett et "Backlight" in the Picture menu
screen.
When set to "Enable",
down
Audio menu is grayed out when Output Select is set to
"Variable". (See page 25.)
For resetting all Audio adjustment items to the factory
preset vah_es, press _/T to select "Reset", press ENTER,
press _,/T to select "Yes", and then press ENTER.
Surround function allows you to enjoy realistic
sound.
On: Surround function is on.
Off: Normal sound.
the power will automatically
shut
if there is no signal for 15 minutes.
When it is 5 minutes betore the power shuts down, the
remaining time will start to keep appearing every minute.
"Disable" is the factory preset value.
When a TV program finishes, this function may not operate.
"live"
You can set the time length the TV takes to automatically
shut the power down when
30min/3Hour/Disab_e
there is no operation.
When it is 5 minutes betore the power shuts down, the
remaining time will start to keep appearing every minute.
"Disable" is the factory preset value.
Audio menu is grayed out when Output Select is set to
"Variable". (See page 25.)
For some discs, setup may be required on your DVD player.
In this case, please refer to the operation manual of your
DVD player.
19
On-Screen
Display
Menu
If initial setup does
not memorize
all the channels
in
Example
Setup
your region,thefollow
memorize
channels.
the instructions
Air/Cable:
below to manually
Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
0}4 Search: Channel auto search makes the TV look for
all channels vbwabb in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGFAL (Cable).
On: Skips channels. (Channelselectiondisabled usingCH
A/V.)
Off: Does not skip channels. (Channelselectionenabled using
CHA/V.)
Antenna Setup Digital: hl order to receive digital air
broadcasts, you need a digital broadcast antenna.
You can confirm the antenna configuration through the
"Antenna Setup Digital" screen. If necessary, adjust the
direction of the antenna to obtain the maximum signal
strength.
Signal Strength: The signalstrength of DIGITALchannelis
displayed.The signalinformation isbased onthe current
channel.
Channel Strength: Input the 2 digit channel numberto check
the signal strength of the selectedchannel.Make surethe
signal is strong enougil for each channel.
• This function is availablefor DIGITAL (Air)only.
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Sebct "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR V3.0 in Home mode default setting.
Home: "Power Saving" isset to "Off",and AVMODE is setto
"STANDARD".
Store: "Power Saving"is set to "Off" and AV MODEis set to
"DYNAMIC(Fixed)".PictureReset and Feature Demo can
beset.
Picture Reset: AV MODEwill be setto "DYNAMIC(Fixed)"
regardlessof whether PictureReset is "On" or "Off". If
you select "On",AV MODEwill be reset to "DYNAMIC
(Fixed)"if there is nooperation for 30 minutes.When "Off"
isselected, AVMODE will beset to "DYNAMIC(Fixed)".
Feature Denlo: When "On" is selected,after all the settings
are corrlpleted, the Feature Demo screen isdisplayed if
there isno operationfor severalmfllutes.
o ENERGY STAR qualification is based on AV MODE
"STANDARD".
Air/Cable: Make sure what kind of connection is made
o See "Initial Setup" on page 12 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try channel search again.
This setting allows you to skip the HDMI or PC-IN Input
("Input 4 (PC)", "input 5 (HDMI)", "input 6 (HDMI)" and
"Input 7 (HDMI)") on the Input Selection operation.
Yes: Skips the input.
No: Does not skip input.
Lets you set the input terminal
displayed
when
using
the INPUT SOURCE menu or channel display. Press
A/T'/_/I_
to select the new name for the input
mode.
with your TV when selecting "Air" or "Cable".
OH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
o You cannot change labels if the INPUT SOURCE is TV.
o See "Initial Setup" on page 12 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try E7 Setup again.
20
On-Screen
Display
Menu
iiiii_!!!_iii_'_!_i!ii!ii!@_i!_!_ilil
¸_;___!!!!!iiii
For adjusting a picture's horizontal and vertical
position.
H-Poe.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment
is needed
to optimize the image.
H-Poe.: Centers the image by moving it to the left or
right.
V-Poe.: Centers the image by moving it up or down.
Clock: Adjust when the image flickers with vertical
stripes.
Phase: Adjust when characters have low contrast or
when the image flickers.
o For resetting adjustments to the factory preset values, press
A/_" to select "Reset", and then press ENTER.
o When connecting a PC to the HDMI terminal, the image
positEon will be automatically adjusted. It cannot be
manually adjusted.
o Adjustments are stored separately according to input
source.
o When a DTV channel is selected, the horizontal position
cannot be adjusted.
o The horizontal and/or vertical position may not be able to
be adjusted or it may be adjusted only to a certain degree.
Some input signals
may have to be registered
o For resetting all Fine Sync. adjustment items to the factory
preset values, press A/T to select "Reset", and then press
ENTER.
• It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
• The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrical.
manually
Determines
to display properly. The pair of input signals (resolutions)
in the list below is not distinguishable
when received.
In such a case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
Lf024
x 768
whether
the AUDIO
terminal
is used for
INPUT 4 (PC-IN) or INPUT 5 (HDMI).
Input 4 (PC}: Select this item when the audio signal is
input via the INPUT 4 (PC IN) terminal using an analog
RGB cable.
Input 5 (NDMI}: Select this item when the audio signal is
input via the INPUT 5 (HDMI) terminal using an HDMI
DVI conversion cable.
fseox768 I
_S_,
o You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
o When "PC Audio Select" is set to "Input 5 (HDMI)", sound
will not be produced ifyou use only an HDMI certified
cable to connect HDMI compatible equipment. To produce
sound, you should make an analog audio connection.
o If you want to connect HDMI-compatible equipment using
only an HDMI certified cable, set "PC Audio Select" to
"Input 4 (PC)".
For automatically
adjusting the PC image.
Yes: Auto Sync. starts.
No: This function does not work.
To watch
o When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
o Auto Sync. may fail even if "Completed" displays.
o Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
o Be sure to connect the PC to the TV and switch it on before
an HDMI or PCqN equipment
irrlage,
select "INPUT5", "INPUT6" or "INPUT7" from "INPUT
SOURCE" menu using INPUT on the remote control
unit or on the TV.
Enable: To use View Mode based on signal recognition,
including an HDMI signal.
Disable: No function.
starting Auto Sync.
o Refer
signal
o When
to the
21
to your external equipment operation manual for the
type.
connecting an HDMI DVI conversion adapter/cable
HDMI terminal, the image may not come in clearly.
On-Screen
Display
Menu
[] New
is connected
to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
corrlpatible
with the audio format of the program you
are watching and the equipment
connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Dolby DigitaE The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digitak
[] Secret
adjustments
"Return to factory
screen.
are made and the settings
pre-setting"
displays
on the
Used to enable or disable the parental control function.
Thb function will not be selectable from the menu if
o If you have already set the Secret No., input the 4 digit
secret number here.
2
Select
No. Clear
As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not be
selectable from the menu.
cannot be restored to normal, you can reset the
settings to the factory preset values.
1
No.
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret nur_ber is not cleared.
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
If complex
Secret
You can set and change the secret number by using
0-9.
Input Secret No.: When you change the secret number,
enter the old 4 digit secret number here. The cursor
moves to "New Secret No.".
New Secret No.: When you set the new secret number,
enter the new 4-digit secret number here. The cursor
moves to "Reconfirm".
Reconfirm:
Enter the same 4 digit number you set in
"New Secret No.".
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
you do not first configure your secret
On: Enables Parental CTRL
Off: Disables Parental CTRL
"Yes".
o After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings.
number.
V-CHIP is an electronic filtering device built into your
TV. This tool gives parents a great degree of control
o
o
o
o
The
The
The
The
over broadcasts
accessed by their children. It allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It
does so automatically
once you activate the V-CHIP
feature in your TV. "V-Chip" and "Status" will not be
selectable from the menu if you do not first configure
your secret number.
The U.S. has two rating systems for viewing content: TV
Parental Guidelines and movie ratings.
The TV Parental Guidelines work in conjunction with the
V CHIP to help parents screen out inappropriate television
shows from their children.
Movie ratings are used for original movies rated by the
Motion Picture Association of America (MPM) as watched
on cable TV and not edited for television. The V CHIP can
also be set to block MPM rated movies.
Channel Setup settings will not be changed.
Language settings will not be changed.
Secret number settings will not be changed.
TV Location settings will not be changed.
iij!i_i_,_i_iai_i!i!i!i!i!i!iiiii
¸iii
¸i_!_!_i!_!_!;_i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
Allows you to use a secret number to protect
settings from being accidentally
changed.
certain
IMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 22 to 24):
1. Secret No. is registered.
2.V-Chip/V-Chip
(DTV Only) settings have been made.
The "V-Chip (DTV Only)" will only be selectable when
a new rating system can be downloaded via digital
broadcasting in the U.S.
3. "Status" is set to "On".
The setting automatically enters "Block" for any ratings
below your selection.
If Status is not set to "On", the configuration settings will not
work.
22
On-Screen
[] MPAA
DispJay Menu
(Voluntary
movie
rating
G: General aadbnces. All ages admitted.
PG: Parental guidance suggested. Some material may not be
suitable for children.
PG-13: Parents strongly cautioned. Some material may be
inappropriate for children under 13.
R: Restricted. Under 17 requires accompanying parent or
adult guardian (age varies in some jurisdictions).
NC-17: No one 17 and under admitted.
X: X is an older rating that is unmed with NC 17 but may be
encoded in the data of older movies.
system)
Example
Press A/Y
to adjust the item to your desired position.
"Block" indicates the item is blocked. Press MENU to
exit.
o Voluntary movie rating system only uses an age based
rating.
[] iV
Parental
Guidelines
Press_i,/T to adjust the item to your desired position.
"Block" indicates the item is blocked. Press MENU to exit.
Example
Example
When
item:
setting
an individua_
content-based
1
Press I_ or ENTER to access blocked content
items from the currently selected age-based rating
item.
2
Press_./Y
to select an individual item, and then
press ENTER to unblock it ("Block" is removed).
Repeat the same steps for the other items.
3
Press _1 or RETURN to register
content rating items are set.
after all individual
Content
FV
(Fantasy
_)
V
(Violence)
S
(Sexual
situation)
L
(Adult
language)
.....
i_,I
_,I_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I
_,I_,I
_,I
_,I_,I
_,I
_,I
D
(Sexually
suggestive
dialog)
TV Y (All children)
[]
[]
[]
[]
[]
TV Y7 (Directed to older children)
X
[]
[]
[]
[]
Suggested
TV G (General audience)
[]
[]
[]
[]
age
TV PG (Parental Guidance suggested)
X
X
X
X
TV 14 (Parents strongly cautioned)
X
X
X
X
TV MA (Mature audience only)
X
X
X
[] : The content rating can be set, but this rating is not normally
X : Content rating can be set.
23
rating
broadcast
by TV stations.
On-Screen
Display
Menu
Canadian Rating Systems (Canadian English ratings and Canadian
French ratings)
o The TV rating systems in Canada are based on the Canadian Radio Tebvision and Tebcommunbations
Commission (CRTC)
policy on viobnce in television programming.
o While viobnce is the most important content ebment to be rated, the structure developed takes into consideration other
program content like language, nudity, sexuality and mature themes.
o When setting the V CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French
ratings.
[] Canadian
English
E: Exempt: Includes news, sports, documentaries and other information
programming; talk shows, music videos, and variety programming.
0: Children: Intended tot younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense ot
security and well-being.
08+: Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen.
G: General: Considered acceptable tor all age groups. Appropriate
viewing tot the entire family, contains very little violence, physical,
verbal or emotional.
PC: Parental Guidance: Intended for a general audience, but may not
be suitable tot younger children (under the age of 8) because it could
contain controversial themes or issues.
Ratings
Example
Press A/_" to adjust the item to your desired
position. "Block" indicates the item is blocked.
Press MENU to exit.
[] Canadian
French
14+: Over 14 years: Could contain themes where viobnce is one ot
the dominant elements of the storyline, but it must be integral to the
development of plot or character. Language usage could be protane
and nudity present within the context of the theme.
18+: Adults: Intended tot viewers 18 years and older and might contain
depictions of violence, which while related to the development of plot,
character or themes, are intended tot adult viewing. Could contain
graphic language and portrayals d sex and nudity.
Ratings
E: Exempt programming.
G: General: All ages and children, contains minimal direct violence, but
may be integrated into the plot in a humorous or unrealistic manner.
8arts+: General but inadvisable tot young children: May be viewed
by a wide public audience, but could contain scenes disturbing to
children under 8 who cannot distinguish between imaginary and real
situations.
Example
Recommended tor viewing with parent.
13arts+: Over 13 years: Could contain scenes of frequent violent scenes
and theretore recommended for viewing with parent.
16arts+: Over 16 years: Could contain frequent violent scenes and
intense violence.
18arts+: Over 18 years: Only for adult viewing. Could contain frequent
violent scenes and extreme violence.
Press A/_" to adjust the item to your desired
position. "Block" indicates the item is blocked.
Press MENU to exit.
[] How
to temporarily
When the V-CHIP
1
Press
ENTER
2
Input the 4-digit
[] Reactivating
release
BLOCK
the
is working
while the V-CHIP
secret number
the temporarily
V-CHIP
BLOCK
and censors
is working,
a broadcast,
"V-CHIP
and then the secret
by using 0-9. At this time V-CHIP
released
V-CHIP
HAS BEEN ACTIVATED."
number
BLOCK
setting
displays.
menu displays.
temporarily
releases.
BLOCK
You can reactivate the temporarily
released V-CHIP BLOCK as shown below.
o Select "Status" setting from the Parental CTRL menu to reactivate BLOCK. (See page 22.)
o Select "V Chip" setting ("MPAA", "TV Guidelines", "Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to
reactivate BLOCK. (See pages 22 to 24.)
o Switch off the TV power.
o Pertorming any ot the three above will activate the WCHIP BLOCK.
24
On-Screen
Display
Menu
Allows you to select what
Example
_
Option
controls
the audio output.
Fixed:
theremotecontrolunitorVOL+/Sound via speaker is adjusted with
ontheTV.
VOL+/-
on
Sound via the AUDIO OUTPUT terminal is not
adjustable and outputs at a consistent bveL
Variable: Sound via the AUDIO OUTPUT terminal is
adjusted with VOL +/on the remote control unit or
VOL+/on the TV.
Sound via speaker is muted.
Select the video signal system
equipment
from the list below:
Auto/NTSC/PAL-M/PAL-N
corrlpatible
with your
o "Color System" can only be set for the INPUT 2 S VIDEO
and INPUT 3 VIDEO.
_
_
_
....
_
,_
......
When listening to music from a music program,
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
you
.........
Example:
Selectable items available for "Font Style".
Default: The font specified by broadcasting station or
default font.
Type 0: Proportional font used in the MENU screen.
Type 1: Monospaced with serifs.
Type 2: Proportionally spaced with serifs.
Type 3: Monospaced without serifs.
Type 4: Proportionally spaced without serifs.
Type 5: Casual font type.
Type 6: Cursive font type.
Type 7: Small capitals.
o The screen image will return to normal when a button (except
those for audio adjustment, such as VOL, MUTE, AUDIO)
is pressed.
%%
If the image does not corne in clearly from
_
This function allows you to adjust the closed caption
screen appearance
to suit your preference.
You can
adjust 8 items: "Font Size", "Font Style", "Font Color",
"Font Opacity", "Background
Color", "Background
Opacity", "Font Edge" and "Edge Color".
the external
equipment
connected
to INPUT 2, you may need to
change the input signal type setting from the list below:
Auto/COMPONENT/S-TER
MINAL
o For resetting adjustments to the factory preset values, press
A/T to select "Reset", and then press ENTER.
o The default value depends on the broadcasting station.
o Ifthe selected signal type is incorrect, images are not
displayed at all or are displayed without any color.
o Refer to your external equipment operation manual tor the
signal type.
o Ifyou set INPUT 2 to Auto, the TV will automatically select
the input signal.
o Setting INPUT 2 signal selection to "Auto" when other
equipment is connected will result in the tollowing
connection priority.
INPUT 2:
11 COMPONENT VIDEO
/2 S VIDEO
This function allows viewing of digital closed caption
information for the digital broadcast program being
viewed.
o This list is not displayed for analog broadcasts or external
input audio/video.
o This information is not included in CC1, CC2, T1 {TEXT1),
or T2 (TEXT2), and is not displayed in a list.
Select the CH display when changing channels
digital broadcasting.
On: "Program Info." displays.
Off: "Program Info." does not display.
25
for
On-Screen
Display Menu
This function allows software updates by inserting
a USB mernory device with the update file into the
SERVICE terminal on the TV.
To check for the availability of a software update, visit
www.sharpusa.corn.
If you have any questions, please
This function allows you to program 4 favorite
channels, in 4 different categories.
By setting the
favorite channels in advance, you can select your
favorite channels easily.
Te register your faverite channel:
Sebct "Register" and then press ENTER. Press A/T/_/
to select the position in the category, and then press
ENTER to register.
Te delete your favodte channel:
Sebct "1 Data Cba¢' and then press ENTER. Press
A/_'/_/_to sebct the channel you want to debte, and
then press ENTER. Sebct "Yes" and then press ENTER.
To delete all the tavorite channels, select "All Data Clear".
call 1-800-BE-SHARP
, Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
, Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail
1
Insert the USB memory device with the update
into the SERVICE terminal on the TV.
2
Press
press
3
Press A/Y
to select "Software Update", and then
press ENTER.
o if you have already set the Secret No., go to step 4.
o Before setting the channel, select the channel you want to
register as a favorite channel.
This function locks the operation
and the remote control.
buttons
(800-237-4277).
file
on the TV
Off: No adjustment.
RC Control Lock: All buttons on the remote control are
locked.
Button Control Lock: All buttons on the TV, except
POWER, are locked.
o To unlock the buttons on the remote control, press MENU
on the TV, and then select "Off" on the MENU screen.
o To unlock the buttons on the TV, press MENU on the
remote control, and then select "Off" on the MENU screen.
Select to play the Demo Mode.
On: Play product feature demo.
Oft: This function does not work.
J_
MENU to display the MENU
_/1_ to select "Option".
screen,
and then
Option
o Ifthe power is turned ofl or the AC cord is unplugged when
the TV is in demo mode, the TV will start in demo mode
when it is turned back on.
Software
The current
version
of the TV software
is displayed.
26
Update
l
4
Input the 4-digit
secret
number
5
Press ENTER to start checking
memory device.
by using 0-9.
the data in the USB
On-Screen
6
During
Display
Menu
the data checking,
"Checking"
blinks.
7
Press ENTER to start updating.
o The screen becomes dark tor a while until the update
screen can be displayed. Please wait tor the update
screen to appear. Do not unplug the AC cord.
Checking
o The current version of the TV software and the version
ot the update file on the USB memory device are
displayed. To update the TV software with the update
file, select "Yes", and then press ENTER.
!
Example
Example
o If the USB memory device
correct update file cannot
device, an error message
o Check the file on the USB
reinsert the USB memory
is not properly installed or the
be found on the USB memory
is displayed.
memory device, and then
device correctly.
, Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
8
When the software is successfully
updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Example
o If the update has tailed, check the file in the USB
memory device and try So.are
Update again.
g
After the screen shown
ENTER.
10 Remove
27
below is displayed,
the USB memory
device.
press
Appendix
Problem
Poseibb
Solution
o No power
o Check if you pressed POWER on the remote control unL (See page 12.) if the
indicator on the TV does not light up, press POWER on the TV.
o is the AC cord disconnected? (See page 8.)
o Has the power been turned on? (See page 12.)
o Unit cannot be operated.
o External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning off the power of the TV or
unphJgging theAC cord and replugging it in after 1 or 2 minutes.
o Remote control unit does not
o Are
o Are
o Are
o is a
operate.
batteries inserted with polarity ( I , -) aligned? (See page 9.)
batteries worn out? (Replace with new batteries.)
you using it under strong or fluorescent lighting?
fluorescent light illuminated near the remote control sensor?
o Pbture is out off/with sidebar
screen.
o Is the in]age position correct? (See page 21 ,)
o Are screen mode adjustments such as picture size made correctly? (See page 16.)
o Strange color, light cdor, or cdor
misalignment
o Adjust the pbture tone. (See pages 18 and 19.)
o Is the room too bright? The pbture may look dark in a room that is too bright.
o Check the input signal setting. (See page 21 .)
o Power is suddenly turned off.
o Is the sleep timer set? (See page 13.)
o Check the power control settings. (See page 19.)
o The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
o No picture
o
o
o
o
o
o
o No sound
o is the vohJme too low? (See page 13.)
o is "Variable" selected in "Output Select"? (See page 25.)
o Have you pressed MUTE on the remote control unit? (See page 13.)
o The TV sometimes makes a
cracking sound.
o This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
The error message
about
reception
is connection to other components correct? (See page 11.)
is correct input signal source selected atter connection? (See page 25.)
is the correct input selected? (See page 25.)
is picture adjustment correct? (See pages 18 and 19.)
is "On" selected in "Audio One/'? (See page 25.)
is a non-compatible signal being input? (See page 30.)
of broadcast
The example of an error message
displayed on a screen
Possible
Solution
o Failed to receive broadcast,
o Check the antenna cabb. Check that the antenna is correctly setup.
o No broadcast
o Check the broadcast time in the program guide.
Cautions
now.
regarding
use in high and low temperature
environments
o When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
o Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to detorm and the Liquid Crystal panel to malfunction. Storage temperature: -4°F to
I 140°F (- 20°C to I 60°C)
28
Appendix
Jiiiiii_,,
Item
Model: LC-32D47UT
32" Class (31 1/2"Diagonal)
Active Matrix (a Si TFT LCD)
LCD panel
Resolution
1,049,088 pixels (1,366 x 768)
TV standard (CCIR)
I TV
Function
Receiving
Channel
American TV Standard ATSC/NTSC System
VHF/UHF
VHF 2 13ch, UHF 14 69ch
CATV
1-135ch (non-scrambled
channel only)
DigitalTerrestrial
Broadcast
(SVBB)2 69ch
Digitalcable*_
(64/256 QAM)
Audio multiplex
Backlight
1 135ch (non-scrambled channel only)
BTSC System
60,000 hours (at Backlight Standard position)
Audio out
10W x 2
Rear
Terminals
INPUT 1
COMPONENT in
INPUT 2
COMPONENT in, S VIDEO in
INPUT 4
ANALOG RGB (PC) in (15 pin mini D sub female connector), Audio in (© 3.5 mm jack)
INPUT 5
HDMI in with HDCP, Audio in (@3.5 mm jack)
INPUT 6
HDMI in with HDCP
ANT/CABLE
75 _2Unbalance, FType x 1 tor Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
AUDIO
Audio in (@3.5 mm jack)
BIGITALAUDI0
OUTPUTOptical Digital audio output >_ 1 (PCM/Dolby Digital)
Side
OUTPUT
Audio out
INPUT 3
AV in
INPUT 7
HDMI in with HDCP
SERVICE
Software update
OSD language
English/French/Spanish
Power Requirement
AC 120 V, 60 Hz
Power Consumption
105 W (0.3 W Standby with AC 120V)
TV + stand
26.5 Ibs./12.0 kg
Weight
TV only
24,3 Ibs,/11,0 kg
Dimension_2
TV + stand
31
ON x H × D)
TV only
31
Operating temperature
47/64X 22 61/L_× 9 49/64inch
47/64X 21
32°Fto
1/32
>_
4
11/64
I t04°F(0°Cto
inch
I 40°C)
Emergency alert messages via Cable are unreceivable.
.2 The dimensional drawings are shown on the Spanish operation manual.
o As part of policy ot continuous improvement, SHARP reserves the right to make design and specification changes tot product
improvement without prior notice. The pertormance specification figures indicated are nominal values ol production units.
There may be some deviations from these values in individual units.
The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest
shop.
o Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue
for compatibility and check the availability.
29
Appendix
iiii_
....
It is necessary
to set tile PC correctly
PC
Resolution
VGA
PC
to display
XGA and WXGA
Horizontal
Frequency
signal.
Vertical
Frequency
VESA Standard
720 x 400
31.5 kHz
70 Hz
640 x 480
31.5 kHz
37.g kHz
37.5 kHz
60 Hz
72 Hz
75 Hz
0
0
0
35.1
37.g
48.1
46.g
48.4
56
60
72
75
60
Hz
Hz
Hz
Hz
Hz
0
0
0
0
0
70 Hz
75 Hz
60 Hz
0
0
0
SVGA
800 x 600
XGA
1024 x 768
WXGA
1360 x 768
kHz
kHz
kHz
kHz
kHz
56.5 kHz
60.0 kHz
47.7 kHz
VGA and XGA are registered trademarks of International Business Machines Corp.
CLEARING
THE
SECRET
If you forget the secret
NUMBER
number,
clear the secret
number
using the following
procedure.
the on-screen
on the screen.
i
1 Select an item from the list below to display the secret number input screen. (For operating
display menu, see page 17.)
o "E Setup", "CH Setup", "Parental CTRL" or "Reset" on the Setup menu.
o "Sottware Update" on the Option menu.
2 Press and hold both CH/X and VOL+ on the TV simultaneously
until the message appears
The secret
number
is hhh_
o As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
3O
Calling
for Service
For location of the nearest Sharp Authorized Sewice,
customer assistance, please call 1-800-BE-SHARP.
LiMiTED
SHARP
in its
defective
This
warranty
changed,
been
CORPORATION
odg_nal
Product
container,
or part
does
altered
not
apply
used
In order
to enforce
proof
To the extent
OTHER
permgtod
only
for
_ebed
given
the time
of the
does
not
Product
cover
you
for Products
modification,
attempted
repairs
tia_ economic
not apply.
THIS
LIMITED
FORTH
or Efthe serial
Sharp
_s meant
or
model
reception
sMely
Uqu_d
it will,
for
proMems.
Crystal
at its
parts
number
for the non
purposes
for
the steps
brand
that
to the purchaser
number
for commercial
1-888-GO-SHARP
follow
set forth
ABOVE
WARRANTIES
APPMCABLE
OF
STATE
here_n.
and exclusive
No
other
shal_ constitute
of a]_ claims,
which
Product
have
labor
affixed
Th_s
supplies,
product
either
for
repair
to the Product
household
setting,
be aMe
(the
ARE
has been
will
use
not apply
proof
Additional
or promises
negligence,
warranties,
AND
VAMDLY
FITNESS
Product
has
by consumers
avaElabEe
of purchase
be the
FORTH
sole and
in
to cover
to the servEcer,
HabiHty
or
implied.
SpecEfically
ALL
PURPOSE
ARE
A PARTICULAR
or otherwise.
EXCLUDED,
THIS
remedy
Correction
of Sharp
OR
BELOW.
exclusive
are permitted.
responsib_ffies
stdct
express
FOR
BE DISCLAIMED
OF PURCHASE
SET
STATE TO STATE.
by anyone
and
USE,
NOT
and shall
made
of a]] _[ab[_ffies
on contract,
DATE
FROM
been
subject
other
Some
IS VALID
ONLY
to abuse
improper
than
states
(including,
operation
a Sharp
do not
IN THE
FIFTY
Hmits
(50}
but
not Hmgod
or maff_tenance
autber_zed
allow
UNITED
to, improper
or any
serv_ce_
Nor
on warranties
voltage),
damages
shah Sharp
purchaser
Sharp
does
THE
DURATION
WARRANTY
available
of defects,
to the
STATES,
THE
or
accident,
defects
GIVES
YOU
to the purchaser
and
in the manner
with
respect
not warrant
for breach
DISTRICT
m_suse,
and for
to the Product,
nor shah
negligence,
_n the Product
be _ab_e or _n any
or on remedies
Model
Humber
LC+32D47UT
& Description:
for
this
Exclusions
Coverage
Product:
One
from
(if any):
sure
LCD
to have
(1) year
way
which
responsible
_n certain
AND
lack
were
for any
transactions;
OF COLUMBIA
In order
for
sewicer,
free
Servicer
Color
Sharp
the
and
be _ab_e,
PUERTO
the
and
Product
and
or
and/or
to
clear
non
the
when
the date
be
or
the _m_ts herein
RICO,
serviced,
the
complex
service
must
standard
_nterfere
after service,
Any
above
need
Product
or non
_nsta_ation.
a Product
you
for your
and
provided
addgiona_
beyond
be
readily
installation,
with
not covered
Obtain
Service:
From
a Sharp
nearest
to Obtain
Service:
PRODUCT
Sharp
Contact
Servicer
INFORMATION
by this
Lff_ffod
Author_ed
Autber_ed
your Sharp
w_ll come
Servicer's
facBity
Purchase
available.
Wart anty
Servicer
Servicer,
(see
that
and
in the United
call
Sharp
return
the set
EXTENDED
to you
once
SHARR
Sharp
Plaza,
Mahwah,
New
CORPORATION
Jersey
07495-1163
SHARP CORPORATION
31
The
remounting
is not
into
materials
required
to
by th_s
to prevent
To find
the
_s
this).
location
of the
free at 1 8OO BE-BHARR
completed.
WARRANTIES
the
other
of the consumer.
_ong periods
of time
on how
States.
toll
to
or
Product.
are not covered
Authodzod
Servicer
to obtain
in home service
to your
location
and if necessary
remove
the
and
OR PURCHASE
ACCESSORIES
AND
OR VISIT www,sharpusa,com
SHARP ELECTRONICS
Manua_
avai_aMe
the
such
labor
the foregoing
Operation
located
please
Product.)
mounting
servicing
warranty,
may resuff _n addgiona_
charges
and are the responsibility
Image
Retention
resuffing
from a fixed
image being
d_sp_ayed for
TO OBTAIN
care,
by repe_rs
or consequen
states,
of purchase.
unreasonably
Product
standard
reinstall
available
from
of any
would
will remount
remove
labor
which
a complex
to do
of reasonable
caused
incidental
in such
Television
th_s _nformation
parts
encumbrance
What
the
defaced,
Section
Period
to
Efthe
are warranties
to provEde
when
replace
below.
removed,
of the Product
there
or
set forth
AND
FOR
MAY
by Sharp
of, aJE other
EXPRESS
FITNESS
THE
VARY
granted
fulf[[ff_ent
exclusive
ALL
WARRANTIES
FROM
WHICH
warrant_es
based
are in lieu of, and
EXCLUDED,
IMPMEB
(Be
Where
or
"Product"),
the defect
the pebed(s)
E_mffod warranty
commercial,
You must
Display
option,
or
or _n a commerciaJ
further information.
set forth below.
MERCHANTABILITY,
LAW,
representations
complete
whether
m_suse,
by anyone
damage.
WARRANTY
Specific
Warranty
this
and agrees
_nst alEat_on or signal
should
the warranties
SET
THE
tampering,
performed
or property
may
Warranty
that
at no charge
tHs warranty
IS LIMITED
TO THE PERIOD(S)
MAY ALSO
HAVE OTHER
RIGHTS
set forth
satisfaction
law,
THOSE
be the sole
bere_n,
purchaser
and materials,
equivalent
or application;
state
THAN
here_n shah
alteration,
Your
accessories,
way
responsible,
Model
consumer
workmanship
Eimffod warranty,
IF, UNDER
pebeds
fuji
tMs
INCLUDING
described
sbel_ constitute
literature,
of purchase.
by appEEcable
IMPMEB
WARRANTIES
LEGAL RIGHTS.
YOU
of time
or in any
date
OTHER
EXCLUDED.
The warranties
ffems
warranty
setting
under
the
WARRANTIES
OF SUCH
SPEC_HC
This
the first
defective
or remanufacturod
appearance
wffh.
rights
_nclude
WARRANTIES
IMPLIED
SPECIHCALLY
to any
to
from
a new
If you _ntend to or already
use this Product
the terms
of which
may vary. Please
contact
your
must
with
in a commerdaJ
their home or residence.
_our use of this Product,
which
warrants
will be free
thereof
or tampered
or is being
product
WARRANTY
ELECTRONICS
shipped
or to obtain
Be
CALL
for this product.
The
unff for repeir at the
sure
to have
Proof
1-800-BE-SHARP
of
VALID
IN CANADA
ONLY
f---------SHARP
|
|
|
[]
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Elect_nada
Sharp brand product,
Ltd. (hereinafter called 'Sharp") gives the following express warranty to the first consumer purchaser for this
when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
If any such
defects should be found in this product within the apNicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty
[]
_e
[]
or Sharp's
__alaesrSa
![]
[]
[]
|
shall not apply to:
manuaLuse
as outlined
head
in the owner's
owner s manual.
Authorized
cleaning
__a
Servicing
mod,f,ed
adjusted
....pairod
byany
pa,tyothorthan
Sharp
She,p.
Authorized
Se ice
Ceotros
Dealers.
result
tapes and chemical
of th .....
ith it.....
t specified
or approved
by Sharp,
cleaning agents.
sawn:..........
ble or peripheral it .....
quired through .....
controls, AC adapters, batteries, temperature
probe, stylus, trays,
not limited to earphones, remote
paper.
'
o the surfacentorextedor
_"
[]
(f) Any damage caused by external or environmental conditions, including but not limited to transmission
stllage_spillage.
(g)A!Uny product received without appropriate model, serial number and CSA/cUL markings.
[]
(h)
i
(i) Any i_
and/or programming
charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase
and a copy of this LIMITED WARRANTY
statement to an Authorized
Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp's discretion on any Sharp television with the
screen size of 27" or larger and on any Sharp Over-the-Range
Microwave Oven.
us'ed for rental or commercial
d by .....
I ......
but
and
[]
Any products
.......
but not limited to
[]
[]
that has been defaced
including
I ....
f the product including
filters, belts, ribbons, cables
d .....
line/power
line voltage
or liquid
purposes.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and aB
liability for direct or indirect damages or losses or for any incidental, special or consequential
damages or loss of profits resulting from a
defect in material or workmanship
relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation
and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfiBment of all obligations and responsibilities
of Sharp
& Labourwhether
(exceptions
to the purchaser with respect to the product and shall constitute fuB satisfaction Parts
of all claims,
based noted)
on contract, negligence, strict
liability or otherwise.
I
[]
[]
Audio Product
Camcorder
DVD Product
1 year
1 year
1 year
ICDTVLCD
TV
o rooove
o....
1 year
Air Purifier
Podable Air Conditioner
1 year
1 year
year
(mog
..........
ponont,
addition
years)
To obla] i; the _ame a_ld address of Ihe _carest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS
OF CANADA LTD 335 Bti_armta Road East, Mississauga,
Ontario L4Z/W9
[]
Off_ler
!
Revision
or
Visit
our
Vi_ite:
Web
site:
www.sharp.ca
www.sharp.ca
12/16/05
32
Service
SHARP
_
_'%c,
qs"_'¢'
_d