README_Avid_editor_v6.5.4_v10.5.4.pdf

Avid

®

Editing Application

ReadMe for Media Composer

®

v6.5.4, NewsCutter

®

v10.5.4, and Symphony

™

v6.5.4

IMPORTANT: Avid periodically makes software updates available for download on

Avid.com at the following location: www.avid.com/us/support/downloads . Please check the above site regularly for information on available downloads for your product.

Important Information

Avid ® recommends that you read all the information in this ReadMe file thoroughly before installing or using any new software release.

Important: Search the Avid Knowledge Base for the most up-to-date ReadMe file, which contains the latest information that might have become available after the documentation was published.

This document describes compatibility issues with previous releases, software installation instructions, hardware and software requirements, and summary information on system and memory requirements. This document also lists hardware and software limitations.

Contents

If You Need Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Changed in v6.5.4 and v10.5.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Fixed in Media Composer v6.5.4, Symphony v6.5.4, and NewsCutter v10.5.4 . . . . . . . . . . . . . . . . . . . 4

Changed in v6.5.3 and v10.5.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Fixed in Media Composer v6.5.3, Symphony v6.5.3, and NewsCutter v10.5.3 . . . . . . . . . . . . . . . . . . 11

New in Media Composer v6.5, Symphony v6.5, and NewsCutter v10.5 . . . . . . . . . . . . . . . . . . . . . . . 16

Symbols and Conventions

Notes on Windows 7 OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Notes on Software Licensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Qualified Hardware and Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting up the NVIDIA Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Shared Storage Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Feature Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Documentation Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Symbols and Conventions

Avid documentation uses the following symbols and conventions:

>

Symbol or Convention Meaning or Action n c w

A note provides important related information, reminders, recommendations, and strong suggestions.

A caution means that a specific action you take could cause harm to your computer or cause you to lose data.

A warning describes an action that could cause you physical harm.

Follow the guidelines in this document or on the unit itself when handling electrical equipment.

(Windows), (Windows only), (Macintosh), or

(Macintosh only)

This symbol indicates menu commands (and subcommands) in the order you select them. For example, File > Import means to open the

File menu and then select the Import command.

This symbol indicates a single-step procedure. Multiple arrows in a list indicate that you perform one of the actions listed.

This text indicates that the information applies only to the specified operating system, either Windows or Macintosh OS X.

Bold font Bold font is primarily used in task instructions to identify user interface items and keyboard sequences.

2

If You Need Help

Symbol or Convention Meaning or Action

Italic font

Courier Bold font

Italic font is used to emphasize certain words and to indicate variables.

Courier Bold font identifies text that you type.

Ctrl+key or mouse action Press and hold the first key while you press the last key or perform the mouse action. For example, Command+Option+C or Ctrl+drag.

If You Need Help

If you are having trouble using your Avid product:

1. Retry the action, carefully following the instructions given for that task in this guide. It is especially important to check each step of your workflow.

2. Check this ReadMe file for the latest information that might have become available after the documentation was published. Also check online for the most up-to-date ReadMe because the online version is updated whenever new information becomes available. To view the online ReadMe, select ReadMe from the Help menu, or visit the Knowledge Base at http://www.avid.com/readme.

3. Check the documentation that came with your Avid application or your hardware for maintenance or hardware-related issues. In addition to the printed documentation supplied with your editing application, the documentation is supplied in PDF format when you install the application. Topics that you print from the Help have limited page layout and formatting features. If you want to print a higher quality version of Help information, Avid recommends that you print all or part of the PDF version of the appropriate Avid manual included in the

Online Library for your editing application. To access the Online Library, select Help >

Online Library from within your Avid editing application.

4. Visit Avid Online Support at www.avid.com/onlineSupport/. Online support is available 24 hours per day, 7 days per week. Search the Knowledge Base to find answers, to view error messages, to access troubleshooting tips, to download updates, and to read or join online message-board discussions.

3

Changed in v6.5.4 and v10.5.4

Changed in v6.5.4 and v10.5.4

The following changes were made in Media Composer v6.5.4, Symphony 6.5.4, and NewsCutter v10.5.4.

Important Compatibility Information for Macintosh Editor v6.5.4

With this release, if you have a Macintosh editor in an Interplay environment, you must have

Interplay v2.7.5 client software installed on your Macintosh system.

XDCAM EX 35 Capture

With this release, you can select XDCAM EX 35 for capture for any project types that support

XDCAM EX.

Fixed in Media Composer v6.5.4, Symphony v6.5.4, and NewsCutter v10.5.4

The following have been fixed:

➤

Bug Number: UDevC00167923. The editing application would crash if the E-mail Setting was set to an incorrect SMTP server.

➤

Bug Number: UDevC00168159. In some instances, FilmScribe displayed an exception if you changed settings in the Remote Settings window.

➤

Bug Number: UDevC00171742. FilmScribe and EDL Manager did not work properly if UAC was enabled on a Windows 7 system.

➤

Bug Number: UDevC00156917. Send To Playback Encode option was not enabled after creating a New user profile.

➤

Bug Number: UDevC00178805. Opening a sequence in EDL Manager might have resulted in

“File not valid” or “Assertion failed” errors.

➤

Bug Number: UDevC00178689. If you opened the Effect Editor after applying an audio effect,

“Unavailable Effect” was listed.

➤

Bug Number: UDevC00176611. In some instances, performing an Audio Mixdown with Sync

Locks enabled changed the Timeline length.

4

Fixed in Media Composer v6.5.4, Symphony v6.5.4, and NewsCutter v10.5.4

➤

Bug Number: UDevC00174657. Importing ProRes 444 Alpha channel did not import properly.

➤

Bug Number: UDevC00181499. Importing an image with an Avid Pan & Zoom effect could have caused the system to hang or crash.

➤

Bug Number: UDevC00180453. The Title Tool did not apply the Safe Colors setting.

➤

Bug Number: UDevC00180902. You would receive “Legend Audio Communications” errors when editing Edit While Capture clips during an ISIS Block Rectify period.

➤

Bug Number: UDevC00181609. The AMA_ListPlugins Console Command did not display all the digits for AMA Plugins versions.

➤

Bug Number: UDevC00172844. Select Media Relatives did not deselect unassociated clips if the clips were selected before choosing the Select Media Relatives option.

➤

Bug Number: UDevC00180833. The DV25 codec was not available when exporting MXF

OP1a.

➤

Bug Number: UDevC00180915. Printing a bin in Script View did not print properly.

➤

Bug Number: UDevC00167051. Green lines appeared at the top of the image if you exported

XDCAM as MXF OP1a.

➤

Bug Number: UDevC00181829. Logging into Interplay from the Interplay Window Login option when in Disconnect Mode resulted in an Access Violation error (Windows) or a

Segmentation Fault error (Macintosh) and the system would crash. Now, you are not allowed to login through the Interplay Window when in Disconnect Mode.

➤

Bug Number: UDevC00169661. AMA linking to XDCAM 50 files created on a Grass Valley

K2 server could not be sent to playback.

➤

Bug Number: UDevC00180706. With a Nitris DX attached, transcoding performance was slow.

➤

Bug Number: UDevC00172085. Video was not seen on the Record monitor when capturing video using IEEE 1394.

➤

Bug Number: UDevC00175241. AIF-C 44.1 OMF audio could not be exported as an AAF without generating .new clips.

➤

Bug Number: UDevC00175291. If a sequence from an earlier version of the editing application, for example, 4.x was brought into the 6.x version of the editing application, not all audio tracks were functional in the Audio Mixer tool.

5


➤

Bug Number: UDevC00177614. Legacy P2 and XDCAM import options did not work unless the AMA plug-ins were removed.

➤

Bug Number: UDevC00180385. You might have received an “Editor has stopped working” error if you imported an XDCAM clip that had a “good shot flag” set in the Sony Content

Browser.

➤

Bug Number: UDevC00176077. You might have received an Exception error when performing an AMA link to an OP1a clip containing a D-track.

➤

Bug Number: UDevC00175764. When the RTAS window was open, the parameters were reset if you opened the Digital Cut tool.

➤

Bug Number: UDevC00176982. Auxiliary timecode would reset when an Add Edit was applied.

➤

Bug Number: UDevC00181368. Bins were saving slowly if AMA linked clips were on Avid

Shared Storage.

➤

Bug Number: UDevC00162293. AMA linking to Flip Factory MXF files may have resulted in an Exception error.

➤

Bug Number: UDevC00178329. (Symphony) The Tool Palette position would reset if you made changes to the Interface Settings.

➤

Bug Number: UDevC00176958. You could not view a quad split in the Source monitor if the sequence contained a second video track.

➤

Bug Number: UDevC00178327. The editing application would crash when attempting to mount an AMA volume on a shared network drive that was on the same Vlan as the ISIS shared storage.

➤

Bug Number: UDevC00177941. (NewsCutter) Saving titles in Autotitler in Marquee would occasionally save the wrong alpha channel.

➤

Bug Number: UDevC00178211. MP4 files did not link or import properly.

➤

Bug Number: UDevC00177416. You could not render real-time effects when using the Link to media option when exporting a Multicam sequence as an AAF.

➤

Bug Number: UDevC00179979. When AMA linking, Dupe Detection was incorrectly identifying clips as duplicates.

6


➤

Bug Number: UDevC00178448. Loading more than 60 AMA H264 QuickTime movies in the

Timeline would freeze the editing application.

➤

Bug Number: UDevC00177012. In some instances, XAVC XDCAM media did not link correctly.

➤

Bug Number: UDevC00178415, UDevC00175757. When Printing a bin, items at the bottom of the list or to the right side of the page did not print properly.

➤

Bug Number: UDevC00179913. You might have received a “Sample miscalculation” error when imported converted MXF files from Rhozet.

➤

Bug Number: UDevC00181608. Performing a dual mono audio mixdown resulted in missing audio.

➤

Bug Number: UDevC00178800. Clicking on the bin lock icon to access the history causes the lock icon to disappear.

➤

Bug Number: UDevC00177281. AMA linked ProRes clips did not consolidate.

➤

Bug Number: UDevC00173311. Changing the color on a group of highlighted clips deselected the group.

➤

Bug Number: UDevC00173627. The Record Monitor would appear black after applying a Pan

& Zoom effect.

➤

Bug Number: UDevC00180280. You could not reformat a native frame rate clip.

➤

Bug Number: UDevC00179255. Right clicking a sequence containing an alpha channel and choosing export might have caused the editing application to crash.

➤

Bug Number: UDevC00180434. (NewsCutter) Duplicate sequence names might have appeared in the Record monitor menu.

➤

Bug Number: UDevC00177880. In some instances, when in Trim mode, playing forward or backward would display the wrong side of the trim.

➤

Bug Number: UDevC00178453. Adding a column did not automatically generate a .1 version of a newly saved Bin View.

➤

Bug Number: UDevC00179943. In some instances, AAF exports failed with linked AMA media.

7


➤

Bug Number: UDevC00181290. The property value list drop down menu in Assist, Instinct and the Interplay Window was empty if Cyrillic or other non 8-bit characters were used in the property name.

➤

Bug Number: UDevC00181290. The property value list drop down menu in Assist, Instinct and the Interplay Window was empty if Cyrillic or other non 8-bit characters were used in the property name.

➤

Bug Number: UDevC00180783. (NewsCutter) Loading a newly captured clip quickly after closing the Capture Tool crashed the editing application while in Capture Mode.

➤

Bug Number: UDevC00181509. After performing an AAF export and import, the Locator text lost its formatting.

➤

Bug Number: UDevC00181236. The text for the subclip number did not update and was unreadable in the Capture Tool.

➤

Bug Number: UDevC00181610. In some instances, Media Creation Settings were not sticking.

➤

Bug Number: UDevC00175197. EDL Manager crashed attempting to create lists from auto-synced audio clips in 3D sequences.

➤

Bug Number: UDevC00176500. In some instances, importing IMX30 MXF media did not import audio tracks properly.

➤

Bug Number: UDevC00175587. An XDCAM Hi-resolution import would fail if you used a different device than was used for the proxy import.

➤

Bug Number: UDevC00180797. Changing the font of Sync Break text in the Timeline did not work properly.

➤

Bug Number: UDevC00180610 . You might have received “Disk access” errors when importing files with invalid characters into NewsCutter.

➤

Bug Number: UDevC00176433. An aaf was not created on the first attempt. If you tried a second time, then it would work.

➤

Bug Number: UDevC00181114. (Macintosh) A shadow layer might have been visible on rolling titles.

➤

Bug Number: UDevC00179735. If Dynamic Relink was enabled, checking out clips from the

Interplay Window could sometimes cause the editing application to get into a “Not responding” state.

8


➤

Bug Number: UDevC00174589. The drop down menu for workspace names in the Import dialog was not wide enough to see the workspace name.

➤

Bug Number: UDevC00174638. You could not batch export audio clips with names longer than

27 characters.

➤

Bug Number: UDevC00169683. The Source Path was not loaded properly when batch importing an ALE file which resulted in an “Invalid FileName” error.

➤

Bug Number: UDevC00170737. (EDL Manager) When sending a drop frame sequence back into the editing application, the editing application viewed the sequence as non drop frame.

➤

Bug Number: UDevC00178895. (NRCS) Vertically scrolling Production Cues might have covered the Save/Cancel buttons.

➤

Bug Number: UDevC00179198. (NRCS) Moving the horizontal scroll bar resulted in garbage characters at the top of the story panel.

➤

Bug Number: UDevC00176337. (NRCS) Changing fonts in the NRCS tool only applied to the active story.

➤

Bug Number: UDevC00176339. (NRCS) Selecting a story highlighted all Production Cue text.

➤

Bug Number: UDevC00180010. The Interplay login window did not hide the inserted password.

➤

Bug Number: UDevC00177408. Performing a Stereoscopic QuickTime Reference exported with effects might have crashed the editing application.

➤

Bug Number: UDevC00177852. In some instances, workspaces with XML files were not recognized as valid media file volumes.

➤

Bug Number: UDevC00178679. (Macintosh) Bins saved to the attic were adding an .avb file extension to the bin.

➤

Bug Number: UDevC00179541. When performing a Post to Web, the URL placeholder was not included in the web xml file.

➤

Bug Number: UDevC00169291. An EDL from a sequence with audio from a stereoscopic clip crashed EDL Manager.

9

Changed in v6.5.3 and v10.5.3

Changed in v6.5.3 and v10.5.3

The following was changed in Avid Media Composer v6.5.3, Avid Symphony v6.5.3, and

NewsCutter v10.5.3.

Change to AVCHD AMA Plug-In

IMPORTANT: (Windows Only) In previous releases, the AMA AVCHD plug-in had its own installer. The plug-in was installed in Program Files\Avid\AVX2_Plug-ins\ AMA\AVCHD. You must uninstall the AVCHD plug-in from the Control Panel before you install the 6.5.3/10.5.3 version of the editing application. Then install the editing application. The AVCHD plug-in will get installed to this location: C:\Program Files\Avid \EditorApplicationName\

AVX2_Plug-Ins\AMA\AVCHD.

Location Change of QuickTime and AVCHD AMA Plug-In

In order to fix a Co-install issue with Pro Tools, the location of the QuickTime AMA plug-in has changed.

Old Location New Location

On a Windows System:

\Program Files\Avid\AVX2_Plug-ins\

AMA\QuickTime

\Program Files\Avid\AVX2_Plug-ins\

AMA\AVCHD

On a Macintosh System:

C:\Program Files\Avid \EditorApplicationName\

AVX2_Plug-Ins\AMA\QuickTime (Windows)

C:\Program Files\Avid \EditorApplicationName\

AVX2_Plug-Ins\AMA\AVCHD (Windows)

/Library/Application

Support/Avid/AVX2_Plug-ins/AMA/MVP_MSP_

Quicktime.avx (Mac)

/Applications/Avid EditorApplication Name

/EditorApplicationName.app/Contents/

SharedSupport/AVX2_Plug-Ins/AMA

Updated NVIDIA Driver

NVIDIA driver version 310.90 has been qualified with this release.

UDevC00176976 The editing application has qualified NVIDIA driver v310.90. The standard configuration requires that the Global preset of the Global Settings for the NVIDIA driver be set to “3D App - Video Editing.” However, with this setting, the Marquee Title tool will not launch.

If you need to use Marquee, set the Global preset to “3D App - Default Global Settings.” If you do not use Marquee, keep the Global preset set to “3D App - Video Editing.

10


Tape ID Character Limit

You can specify a tape ID character limit during Send to Playback. Certain playback systems truncate Tape ID names that are too long. This option allows you to set the Tape ID name length.

Access the Transfer Settings dialog box. Select Tape ID Character Limit and enter a value for the

Tape ID limit.

Fixed in Media Composer v6.5.3, Symphony v6.5.3, and NewsCutter v10.5.3

The following have been fixed:

➤

Bug Number: UDevC00178445. You might have received an “Unsupported format” message when exporting XDCAM EX 35 Mbit OP1A.

➤

Bug Number: UDevC00178141. Volume bins did not get updated correctly after performing a write back.

➤

Bug Number: UDevC00174819. There might have been audio/video sync issues after transcoding ProRes to DNxHD 145.

➤

Bug Number: UDevC00175244. When exporting a QuickTime Reference, “render all video effects” ignored the Media Creation Settings. The editing application rendered to the first media drive, even if another drive was selected in the Media Creation Settings.

➤

Bug Number: UDevC00177937. Even on an approved system, you could not play 3 streams of

XDCAM 50 without dropping frames.

➤

Bug Number: UDevC00177498. When a sequence name was in Japanese, you might have received errors when exporting a QuickTime Reference movie.

➤

Bug Number: UDevC00179138. On systems with many fonts installed, you could not scroll down the font list in the Interface Settings window.

➤

Bug Number: UDevC00178449. The Timeline position indicator would reset if you deselected audio tracks.

➤

Bug Number: UDevC00179312. Not all spans across P2 cards appeared in the Volume bin.

➤

Bug Number: UDevC00178555. The Volume bin properties button always displayed AS02 even if the volume was for another AMA plug-in.

11


➤

Bug Number: UDevC00172771. Non-visible blanking areas did not have the correct black levels.

➤

Bug Number: UDevC00177543. You might have experienced jumbled edits when importing

AAFs into Pro Tools that were exported from Media Composer sequences containing mixed frame-rate media.

➤

Bug Number: UDevC00176433. An aaf was not created on the first attempt. If you tried a second time, then it would work.

➤

Bug Number: UDevC00175855. Position tracking defaults were incorrect for effects promoted to 3D Warp.

➤

Bug Number: UDevC00175594. You might have seen matte key aliasing during full screen playback.

➤

Bug Number: UDevC00177210. Performing an Extend edit when in Color Correction mode resulted in Access violation errors.

➤

Bug Number: UDevC00176730. With Matrox hardware enabled, you might have received

“OutputPortController” errors when using the Title Tool.

➤

Bug Number: UDevC00176466. Some handles might have been added when performing a Send to Pro Tools resulting in additional transcode.

➤

Bug Number: UDevC00171781. You might have received AMERsourceManager errors when toggling between hardware and software mode.

➤

Bug Number: UDevC00165010. Performing a Reveal File did not work for Titles in a bin.

➤

Bug Number: UDevC00176907. The text in a dialog box indicating objects in the bin could be opened in earlier versions of the editing application ended in a question mark, causing confusion.

➤

Bug Number: UdevC00176768. NewsCutter ignored the Composer Settings.

➤

Bug Number: UdevC00176592. You might have received an “Exception crumb exists” error when deleting an edit that was placed after a marker.

➤

Bug Number: UDevC00176295. In some instances, exporting QuickTime resulted in

Segmentation fault errors.

➤

Bug Number: UDevC00176015 . Legacy P2 workflow did not work if the P2 Volume had been copied to a drive.

12


➤

Bug Number: UDevC00175546. XDCAM spanned clips appeared blurred after transcoding from 23.98 to 59.94.

➤

Bug Number: UDevC00175216. Opening a bin in Frame View resulted in only some headframes visable in the bin.

➤

Bug Number: UDevC00177782 . AMA writeback did not let the AMA plug-in manage the volume location.

➤

Bug Number: UDevC00176601 . AudioSuite D-Verb effect parameters did not save properly.

➤

Bug Number: UDevC00177633 . The Audio Mixdown window would not open if there was no available bin open.

➤

Bug Number: UDevC00177182 . Extracting a segment from the end of a sequence where there was an effect on the Master fader left the sequence length unchanged.

➤

Bug Number: UDevC00171537. Clicking between transitions in Trim mode was slower than in previous releases.

➤

Bug Number: UDevC00173790. Full screen playback of the source monitor loaded a black frame.

➤

Bug Number: UDevC00178139. The Script window appeared unsaved even after performing a

Save.

➤

Bug Number: UDevC00177812 . You could not select a local drive for mixdown for Send To

Playback in a standalone environment.

➤

Bug Number: UDevC00178109 . You could not perform a send to playback if the video was not loaded in the monitor.

➤

Bug Number: UDevC00176701 . Linking to Canon H.264 files were offline when Dynamic

Relink was enabled.

➤

Bug Number: UDevC00177839 . When the original network was not available, saving consolidated AMA clips was delayed.

➤

Bug Number: UDevC00178240 . Loading a clip from Interplay into a single Composer window resulted in a “Setting Class” error when you closed the window.

➤

Bug Number: UDevC00174451. You might have received a “CompareChunk” error when analyzing a track with the NEUGEN LMCorrect plug-in.

13


➤

Bug Number: UDevC00178064. Transcoding from XDCAM50 to DNxHD 120 resulted in a split image.

➤

Bug Number: UDevC00173354. If you had a project on an external drive, you could not unmount that external drive if Marquee had been opened.

➤

Bug Number: UDevC00174654. On systems with many fonts installed, selecting a font in the

SubCap effect created a selection window larger than the monitor making it difficult to select a font.

➤

Bug Number: UDevC00171589. (Macintosh) 3D Picture in Picture shifted if you changed the

Timeline Video Quality setting.

➤

Bug Number: UDevC00177201. Received DIDMapper playback errors with EWC clips has been fixed.

➤

Bug Number: UDevC00175228. Performing a Send to Playback with an XDCAM sequence with the audio tracks disabled, the audio bit depth was set to 16bit even if the audio was set to 24 bit.

➤

Bug Number: UDevC00174538. Render times of the LM Correct Loudness plug-in were longer than in previous releases.

➤

Bug Number: UDevC00170198. Selecting Alt (Windows) + Render or Option (Mac) + Render did not render to the last selected drive.

➤

Bug Number: UDevC00178272. The Audio Project Settings Input tab did not display the correct options for the input source.

➤

Bug Number: UDevC00176481. The Title Tool crashed when in an 1080i 59 project.

➤

Bug Number: UDevC00173215. QuickTime “Same as Source” exports were slower if a Nitris

DX was attached.

➤

Bug Number: UDevC00178471. The Multigroup menu did not populate correctly.

➤

Bug Number: UDevC00174107. (Macintosh) With a Nitris DX attached, you could not output

LTC and downconvert to SD simultaneously.

➤

Bug Number: UDevC00173882. The desktop video did not resize to fill the screen on 30” monitors.

14


➤

Bug Number: UDevC00175090. When changing an effect duration, then pressing the Tab key, you might have received a “segmentation fault” or “access violation” error.

➤

Bug Number: UDevC00178961. (AMA) Opening and closing a new volume bin caused P2 write-back to fail.

➤

Bug Number: UDevC00177886. (Nitris DX) You might have seen an “Exception:

DoMixSampleFifoToBus” error when playing a sequence with 20 audio tracks to Direct Out.

➤

Bug Number: UDevC00177697. (Macintosh) When running a Japanese locale, the editing application crashed if the AirPort option (AirMac) was set in the Video Satellite settings.

➤

Bug Number: UDevC00178447. Adjusting IN/OUT audio pans in Clip Mode did not always adjust all the clips from IN to OUT.

➤

Bug Number: UDevC00177282. Exporting a Same as Source QuickTime file with 23.98 media in a 59.94 project resulted in a “no valid resolution” error.

➤

Bug Number: UDevC00173454. Adding a Spectramatte effect twice crashed the editing application.

➤

Bug Number: UDevC00174465. An Animatte image shifted if you switched between 25 fps formats.

➤

Bug Number: UDevC00178653. You might have seen “Assertion failed” errors after checking out a sequence from Interplay resulting in a change to the sequence.

➤

Bug Number: UDevC00175264. The Symphony editing application was missing the 15:1s resolution.

➤

Bug Number: UDevC00173841. You might have seen quality issues in the background in the

Title Tool.

➤

Bug Number: UDevC00177242. (Macintosh) PhraseFind did not return search results when searching on ISIS.

➤

Bug Number: UDevC00175197. EDL Manager crashed when creating a list from stereo 3D clips.

➤

Bug Number: UDevC00169291. EDL Manager crashed with a sequence containing audio from a stereoscopic clip.

15

New in Media Composer v6.5, Symphony v6.5, and NewsCutter v10.5

➤

Bug Number: UDevC00178475. (NewsCutter) The NRCS Tool did not h ave a scroll bar on the right side of the window.

➤

Bug Number: UDevC00177315. Waves RTAS plug-ins were taking too long to load.

➤

Bug Number: UDevC00149163. (Windows) You could not right-click the Dolby Media Meter 2 plug-in to add or delete meters.

➤

Bug Number: UDevC00164069. You could not select items from the Alogorithm pulldown menu in the Izotope RX2 RTAS plug-in.

➤

Bug Number: UDevC00174393. Some 3rd party RTAS plug-ins caused user-interface errors that resulted in AMPI errors.

➤

Bug Number: UDevC00175486. The reformat selection was ignored during a transcode.

➤

Bug Number: UDevC00174079. The button to turn on waveforms was disabled when entering locators.

➤

Bug Number: UDevC00174147. (Macintosh) The color picker did not pick the correct color when the Record monitor was reduced in size.

➤

Bug Number: UDevC00177612. The NRCS Tool did not display Production Cues if they contained Chinese characters.

New in Media Composer v6.5, Symphony v6.5, and

NewsCutter v10.5

For information on new features, see the What’s New pdf.

AMA Plug-ins

The AMA QuickTime Plug-in, AS-02 Plug-in and the MXF Plug-in are included with your Avid editing application. All other AMA Plug-ins are downloaded and installed separately. See www.avid.com/ama .

Audio Device Drivers

For a listing of currently supported Audio device drivers, see http://avid.force.com/pkb/articles/en_US/Download/en379411

16

Before Installing the Editing Application

Before Installing the Editing Application

Read through the Installation Guide for Avid Editing Applications. This document is available on the Knowledge Base.

Important: This is a full version of the editing application. You should uninstall the previous build from your system before you install Media Composer or Symphony v6.5.4 or NewsCutter v10.5.4.

n

(Windows) Note for Domain Administrators: If your editing systems are part of a domain, you must give the user the right to “Increase Scheduling Priority.” This must be done within the

Domain Group Policy on the domain controller by giving the right explicitly to the user or giving the right to a group and adding the user to that group. You will not be able to launch as a regular user if this is not set properly.

Download Note: To avoid “File Path too long” or a “File cannot be copied” warning while unzipping the downloaded installer, try placing the installer .zip on the root level of your C:\ drive and unzip it from that location.

Notes on Macintosh OS

The Avid editing application Macintosh installer switches to 64-bit. Please make sure that your

Macintosh system supports 64-bit prior to installing and that your current non-Avid applications are compatible to run in 64-bit mode.

Notes on Windows 7 OS

Note the following topics if you are running the editing application on the Windows 7 OS.

Disabling Desktop Compositing

When the Avid editor is launched you might see a dialog box asking you to disable desktop compositing. You can disable it without adversely affecting the Avid editing application.

You can choose to disable it and continue with your editing session. The dialog will appear once you relaunch the application unless you disable the option.

To disable the desktop compositing:

1. Access the Control Panel.

2. Double-click System.

3. Click Change Settings.

17

Notes on Software Licensing

4. Click the Advanced tab.

5. Under the Performance area, click Settings.

6. Uncheck “Enable desktop composition.”

The dialog box requesting you to disable desktop compositing does not appear the next time you launch the editing application.

Standard User

You need to first install the editing application as an Administrator. If you are in a Shared

Storage environment, mount your workspaces as an Administrator. You may then log off and log back in as a Standard user, if necessary.

Notes on Software Licensing

If You Upgrade Your Operating System

If you need to upgrade your operating system after you install your Avid editing application, first deactivate your software. After you upgrade your operating system and, if required, reinstall your application, you can reactivate your software. For information on activating and deactivating your software license, see the Installation Guide for Avid Editing Applications.

Minimum RAM Recommendation

For this release Avid recommends a minimum of 4GB of RAM. Some features might require

more RAM and specific hardware. See “Feature Performance” on page 37

for more info.

Qualified Hardware and Operating Systems

Some features are processor-intensive and require specific hardware. See

“Feature Performance” on page 37

for more info.

The following tables provide the information on qualified Windows and Macintosh hardware.

For 3rd-Party Open IO hardware qualification refer to the manufacturer’s documentation. See the

Open IO Frequently Asked Questions document on the Knowledge Base: http://avid.force.com/pkb/articles/en_US/faq/en422991

18

Qualified Hardware and Operating Systems

The following tables also list the qualified Operating Systems. Depending upon your hardware the qualified Operating Systems are:

• Windows 7 64-bit SP1(Professional)

• (Media Composer and Symphony) Macintosh Lion v10.7.4, 10.7.5, Mountain Lion v10.8.2, v10.8.3, 10.8.4

Macintosh OS Permission Information

As of Macintosh OS 10.7 Lion, the default permissions for the root level of the system drive are now set to “Read Only” for all users. This prevents the Avid Editing Application from being able to use this drive as a media drive. You will see the drive grayed out in Media Creation settings or as an option for import, mixdown, render, and consolidate/transcode.

If you don’t intend to use the system drive for media you can leave it alone. This is ideal in most cases.

If you do need to use the system drive, perform the following to change permissions.

To change permissions:

1. Click on your system drive (Macintosh HD in most cases) to highlight.

2. From the File menu select Get Info (cmd+I)

3. Click the lock icon in the bottom right to make changes

4. Click on the “Read only” text in the Privilege column next to Everyone and set the privilege to “Read & Write”

You should now be able to see the system drive as a valid media drive.

n

If you repair permissions on the system drive, they will reset and you will have to repeat this procedure.

Macintosh v10.8 and AVCHD

If you are working with AVCHD and have Macintosh v10.8 (Mountain Lion) OS installed in your system, the AVCHD folder will appear as a QuickTime icon. You can perform a Link to

Volume the same as you did when working with Macintosh v10.7, just note that the folder appears as a QuickTime icon. When performing a Link to File, you must right+click the AVCHD

QuickTime icon and select Show Package Contents. Then you can see the BDV folder. Right

+click the BDV folder and select Show Package Contents. Then you can see the files needed to perform an AMA Link to File.

19


Qualified PC Workstations with Avid Media Composer, Avid Symphony, and Avid NewsCutter

The following PC Workstations are qualified with Avid Media Composer v6 and higher, Avid

Symphony v6 and higher and NewsCutter v10 and higher.

Qualified PC

Hardware Graphics Card Qualified OS

HP z820 Dual 8 Core

Intel Xeon E5-2665 2.4

GHz

NVIDIA Quadro

4000

HP z820 Dual 6 Core

Intel Xeon E5-2640 2.5

GHz

NVIDIA Quadro

4000

Windows 7 64-bit

Windows 7 64-bit

Lenovo D30 Dual 6 core E5-2640 2.5Ghz or

Dual 8 core E5-2660

2.2 GHz 16 GB

DDR3-1600 memory

NVIDIA Quadro

4000

Lenovo C30 Dual 6 core E5-2640 2.5GHz or Dual 8 core E5-2660

2.2 GHz 16 GB

DDR3-1600 memory

NVIDIA Quadro

4000

Windows 7 64-bit

Windows 7 64-bit

Dell T7600 Dual 8 core

Intel E5-2665 2.4 GHz

16 GB DDR3-1600 memory

NVIDIA Quadro

4000

Dell T5600 Dual 6-core

Intel E5-2630 2.2 GHz

16 GB DDR3-1600 memory

NVIDIA Quadro

4000

Lenovo ThinkStation

E31, "Intel Xeon

E3-1245V2 3.40 GHz

8 GB DDR3-1600

RAM

NVIDIA Quadro 600 graphics adapter or integrated Intel HD

Graphics P4000

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

HP z800 Dual 6 Core,

2.66 GHz

NVIDIA

Quadro 4800

Windows 7 64-bit

Supported with

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Software Only

Nitris DX

Mojo DX

20

Qualified PC

Hardware Graphics Card

HP z800 Dual Quad

Core, 2.93 GHz or

2.66GHz

NVIDIA

Quadro 4800

HP z420 6-core Intel

E5-1650 3.2 GHz 8 GB

DDR3-1600 memory

Quadro 2000

Lenovo S30 6-core Intel

E5-1650 3.2 GHz 8 GB

DDR3-1600 memory

Quadro 2000

Dell T3600 6-core Intel

E5-1650 3.2 GHz 8 GB

DDR3-1600 memory

Quadro 2000

HP z400 Single 6 Core

3.33 GHz

NVIDIA

Quadro FX 3800

Quadro 2000

HP z400 Single Quad

Core, 3.06 GHz or 2.93

GHz

NVIDIA

Quadro FX 3800

Quadro 2000

HP Z220 Quad Xeon

E3-1245V2 3.4 GHz

8 GB DDR3-1600 memory (Tower or

SFF)

Quadro 600

HD4000

Lenovo ThinkCentre

Edge 92Z i7-3770S 3.1

Ghz 8 GB DDR3-1600 memory Quad core

All-in-One

HD4000

HP z210 Quad Core

Xeon 3.3- E3-1240, 3.4

E3-1270, 3.5 E3-1280

Quadro 600

HP z200 Intel® Core™ i5-660 3.33 4MB/1333

Dual-Core

NVIDIA

Quadro 600

Qualified OS

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit


Supported with

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Software Only

Software Only

Software Only

21


Qualified PC

Hardware Graphics Card

Dell ™ T5500 Dual 6

Core, 2.66GHz

Dell T5500 Dual,

2.93GHz Quad Core

Dell T3500 Single 6

Core, 3.2GHz

Dell T3500 Single

Quad Core, 2.93GHz

NVIDIA

Quadro FX 4800

Quadro 4000

NVIDIA

Quadro FX 4800

Quadro 4000

NVIDIA

Quadro FX 3800

Quadro 2000

NVIDIA

Quadro FX 3800

Quadro 2000

HP xw8600 Dual Quad

Core, 3.0 GHz

NVIDIA

Quadro FX 3700

Dell T5400 Dual Quad

Core, 2.5 GHz or 3.15

GHz

NVIDIA

Quadro 3700

HP xw4600 Core 2

Duo, 3.0 GHz

NVIDIA

Quadro FX 570

Dell T3400 Core 2 Duo,

2.33GHz,or 2.66 GHz

NVIDIA

Quadro FX 570

Qualified OS

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Supported with

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

Software Only

Mojo DX (No HD capture)

Software Only


Qualified PC Notebooks for Avid Media Composer, Avid Symphony, and

Avid NewsCutter

The following PC Notebooks are qualified with Avid Media Composer v6 and higher, Avid

Symphony v6 and higher and Avid NewsCutter v10 and higher. The following applies to the editing system when running on a laptop:

• DNxHD capture is only supported on Mojo DX on a Quad core system with hyperthreading enabled. Nitris DX is not supported on laptops.

• Capture of 10 bit video for example, DNxHD 185x, is not supported on Mojo DX.

• Playback in full quality 10 bit mode is not supported

22


Qualified PC

Notebooks Graphics Cards Qualified OS

Windows 7 64-bit Lenovo ThinkPad W530

"Intel Core i7-3720QM 2.6

GHz, i7-3820QM 2.7GHz, i7-3920XM 2.9GHz

NVIDIA Quadro

K1000M or

K2000M

HP 8770w i7-3720QM 2.6

Ghz, I7-3820QM 2.7Ghz,

I7-3920XM 2.9GHz 17"

1920x1080 - 8 GB 1600MHz

DDR3 Memory

NVIDIA Quadro

K3000M or

K4000M

HP 8570w I7-3720QM

2.6GHz, i7-3820QM 2.7

GHz 15" 1920x1080 - 8 GB

1600Mhz DDR3 Memory

NVIDIA Quadro

K1000M or

K2000M

Dell M6700 i7-3740QM 2.7

GHz 17" 1920x1080 - 8 GB

1600Mhz DDR3 Memory

NVIDIA Quadro

K3000M or

K4000M

Dell M4700 i7-3740QM 2.7

GHz, 15" 1920x1080 - 8 GB

1600Mhz DDR3 Memory

NVIDIA Quadro

K1000M or

K2000M

HP 8760w i7-2820Q, i7-2820Q 2.2 or 2.3 GHz

HP 8560w, i7-2720Q,

2820Q, 2.2 or 2.3 GHz

17” 1920 x1080

NVIDIA

Quadro 3000M

Quadro 4000M

NVIDIA

Quadro 1000M

Quadro 2000M

Dell M6600, i7-2720Q,

2820Q, 2.2 or 2.3 GHz

17” 1920 x1080

NVIDIA

Quadro 3000M

Quadro 4000M

Dell 4600, i7-2720Q, 2820Q,

2.2 or 2.3 GHz

15” 1920 x1080

NVIDIA

Quadro 1000M

Quadro 2000M

HP 8740w X820, X920

Quad i7 (1.73, 2.0 GHz)

17" 1920x1200

NVIDIA FX

2800M

NVIDIA FX

3800M

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Windows 7 64-bit

Supported With

Software Only

Software Only

Mojo DX

Software Only

Mojo DX

Software Only

Mojo DX

Software Only

Mojo DX

Software Only

Mojo DX

Software Only

Software Only

Mojo DX

Software Only

Mojo DX

Software Only

Mojo DX

23


Qualified PC

Notebooks Graphics Cards Qualified OS

HP 8540w X720, X820

Quad i7 (1.6, 1.73 GHz)

15" 1920x1080

NVIDIA FX

1800M

Windows 7 64-bit

Dell M6500 i- 820Q, i7-840Q, i7-920X(1.73, 1.87,

2.0 GHz)

17" 1920x1200

NVIDIA FX

2800M

NVIDIA FX

3800M

HP 8730 2.53 or 3.06 GHz

Core 2 Duo

NVIDIA

Quadro FX 2700M

Quadro FX 3700M

Windows 7 64-bit

Windows 7 64-bit

HP 8530 2.53 or 3.06 GHz

Core 2 Duo

NVIDIA

Quadro FX 770M

Windows 7 64-bit

Dell 6400 2.53 or 3.06 GHz

Core 2 Duo

NVIDIA

Quadro FX 2700M

Quadro FX 3700M

Windows 7 64-bit

Supported With

Software Only

Mojo DX

Software Only

Mojo DX

Software Only


Software Only


Software Only


Qualified Macintosh Workstations for Avid Media Composer and Avid

Symphony

The following Macintosh Workstations are qualified with the Avid Media Composer v6 and Avid

Symphony v6 and higher. Mac Pro systems ship with the 64-bit kernel enabled. In previous releases, you had to toggle to the 32-bit kernel. With v6 and higher, you must run with the 64-bit enabled.

Qualified Macintosh

Hardware Graphics Cards Qualified OS

Mac Pro “Westmere”

Two 2.66GHz 6-Core

Intel Xeon (12 cores)

Mac Pro “Nehalem”

2.66 GHz or 2.93 GHz

Dual Quad Core Intel

Xeon

ATI Radeon HD 5770 Lion v10.7.4,

10.7.5

Mountain Lion v10.8.2, v10.8.3, v10.8.4

NVIDIA GeForce

GT 120

Lion v10.7.4,

10.7.5


Supported With

Software Only

Nitris DX

Mojo DX

Software Only

Nitris DX

Mojo DX

24



Hardware Graphics Cards Qualified OS

Mac Pro “Nehalem”

Dual 2.26 GHz Quad

Core Intel

Mac Pro “Harpertown”

Dual Quad Core 3.0 or

3.2 GHz

NVIDIA GeForce

8800 GT iMac 27” Display Quad

Core 3.4 GHz

NVIDIA GeForce GT

120

Lion v10.7.4,

10.7.5


ATI 6970M

Lion v10.7.4,

10.7.5


Lion v10.7.4,

10.7.5


iMac 27” Display Quad

Core 2.93 GHz

ATI 4850 Lion v10.7.4,

10.7.5


iMac 21.5” Display

Dual Core 3.6GHz

iMac 27” Display

2.8 GHz 4 GB Quad

Core 1066MHz iMac 27” Display Quad

Core 2.8GHz

GeForce 9400

ATI 4850

Lion v10.7.4,

10.7.5


ATI Radeon HD 4850

Graphics Processor

Lion v10.7.4,

10.7.5


Lion v10.7.4,

10.7.5


Supported With

Software Only

Software Only

Nitris DX

Mojo DX

Software Only

Software Only

Software Only

Software Only

Software Only

25



Hardware Graphics Cards iMac 20” Display

2.66 GHz Core 2 Duo

GeForce 9400

Qualified OS

Lion v10.7.4,

10.7.5


Supported With

Software Only

Qualified Macintosh Notebooks for Media Composer and Avid Symphony

The following Macintosh notebooks are qualified with the current editing applications. The following applies to the editing system when running on a laptop.

• HD Capture on Macintosh notebooks is not supported

• Playback in full quality 10 bit mode is not supported


Notebook Graphics Cards

Mac Mini Server 2.0 GHz i7 Quad core Thunderbolt - 4GB

1333MHz DDR3

Intel

3000

MacBook Air 13" - 2.0 GHz I7

Dual-Core Thunderbolt - 8 GB

1600MHz DDR3L

MacBook Air 13”

1.7GHz Dual-Core Intel Core i5 or

1.8GHz Dual-Core Intel Core i7

Intel HD4000

Intel

3000

MacBook Pro 15" 2.3/2.6/2.7

GHz I7 Quad-Core - Retina &

Thunderbolt

8 GB 1600Mhz DDR3L Memory

HD4000

GeForce GT 650M

Qualified OS Supported With

Lion v10.7.4,

10.7.5


Software Only

Lion v10.7.4,

10.7.5


Software Only

Lion v10.7.4,

10.7.5


Software Only

Lion v10.7.4,

10.7.5


Software Only

26

Compatibility Chart


Notebook Graphics Cards Qualified OS Supported With

MacBook Pro 17"

2.2/2.3/ GHz Quad Core i7

MacBook Pro 15"

2.0/2.2/2.3GHz Quad Core i7

6750M

Intel

3000

6490M

6750M

Intel

3000

Lion v10.7.4,

10.7.5


Software Only

Lion v10.7.4,

10.7.5


Software Only

MacBook Pro 15"

2.53GHz Dual Core i5

15” or 17” 2.66GHz Dual Core i7

MacBook Pro 15” or 17”

2.53/2.66/2.8 GHz Core 2 Duo

GT 330M Lion v10.7.4,

10.7.5


Software Only

17” only - Mojo DX (no

DNxHD capture)

9400M and 9600M Lion v10.7.4,

10.7.5


Software Only

Mojo DX (no DNxHD capture)

MacBook Pro 15” and 17”

2.5 GHz Core 2 Duo

8600M Lion v10.7.4,

10.7.5


Software Only

Mojo DX (no DNxHD capture)

Compatibility Chart

The following table lists the NVIDIA ® driver, QuickTime ® , Windows Media ™ , shared storage,

Sony ® XDCAM ™ , Panasonic ® P2, and Pro Tools LE ® versions that were qualified with the Avid editing applications. Also listed are the third-party applications such as Boris Continuum

Complete, Avid DVD by Sonic ™ , and Sorenson Squeeze ® .

Item Versions Comments

QuickTime Support v7.7.3 (Windows) v10.x, (v7.x legacy) (Macintosh)

Note: QuickTime v10X does not include

QuickTime Pro options.

27

Compatibility Chart

Item

Windows Media

Version Support

Avid Interplay

Support

NVIDIA Driver

Support

Shared Storage

Support

Versions Comments

Windows Media Player 12 (for

Windows 7)

See the Knowledge Base article

“Interplay and Avid Editor

Compatibility.”

If you do not have Windows Media

Player, access the download at www.microsoft.com.

Windows Media export compatibility is subject to Microsoft Windows Media updates.

IMPORTANT: The Avid Interplay components that get installed on the editing application must be updated to the Avid Interplay version that is released with the editing application. These include the Media Indexer, Interplay

Access, Interplay Framework, Interplay

Transfer Client and ProEncode Client.

The Avid Interplay Server components can remain on the previous releases listed as supported. For details, see the “Avid

Editing Application Compatibility with

Interplay Releases” topic in the Avid

Interplay ReadMe.

v310.90

See Setting up the NVIDIA Card.

For setting up the driver for stereoscopic, see the NVIDIA setup info in the

Stereoscopic 3D Workflow Guide.

Avid Unity ™ MediaNetwork and

Avid Unity ISIS ® .

See “Shared Storage Support” on page 36 .

28

Compatibility Chart


Pro Tools

Sony XDCAM driver

• For information on supported versions of Pro Tools in an Interplay environment, see the Avid Interplay

ReadMe or http://avid.custkb.com/avid/app/selfs ervice/search.jsp?DocId=353977&Hi lite=Pro+Tools+Interplay

•

For Co-install information, see Avid

Editing Application Compatibility with Pro Tools.

• For Video Satellite information, see the Video Satellite Guide or http://avid.custkb.com/avid/app/selfs ervice/search.jsp?DocId=354337&Hi lite=video+satellite v2.13 (XDCAM Transfer for

Macintosh)

Win 7-64 FAM 2.3.2 and VFAM

4.0.1

The VFAM firmware version is 2.45. The driver can be downloaded from Sony's website http://esupport.sony.com/.

Panasonic P2 drive (Macintosh) No device support for Lion

(Windows 7) Driver version for

P2 devices:v2.16

There is currently no P2 writeback support for Macintosh clients.

Boris Continuum

Complete v8.1

Avid DVD by Sonic v6.4.4

Sorenson Squeeze

Avid FX v8.1

v6.0.6 (Windows) v6.0.6 (Macintosh)

Ships with:

Avid Symphony ™

Ships with:

Avid Media Composer

Avid Symphony

Avid NewsCutter

Ships with:

Avid Media Composer

Avid NewsCutter

Avid Symphony

Ships with:

Avid Media Composer

Avid Symphony

Avid NewsCutter

29

Avid Editing Application Compatibility with Pro Tools


Avid Artist Series

(Euphonix)

EuControl software v2.6.2 or later See the User’s Guide for information on

Artist Series Color setup information.

Avid Editing Application Compatibility with

Pro Tools

General Co-Installation Notes:

• Install Pro Tools first and then Media Composer.

• You must uninstall all older versions of Media Composer or Pro Tools before installing newer versions.

• Co-install does not support both applications launched simultaneously.

• When you uninstall Pro Tools, choose to uninstall just the application and not the audio drivers or the editing application no longer sees the devices. On a Macintosh Pro Tools system, this is named the “Safe Uninstall.” On a Windows Pro Tools system, you must select the first uninstall option — “Pro Tools Only” — which is not selected by default.

• (Macintosh only) When you uninstall your Avid editing application, you must uninstall just the application and not the audio drivers or Pro Tools no longer sees the devices. When you start the Avid Uninstaller, deselect the options to uninstall AvidCoreRuntime.pkg and

AvidDIORuntime.pkg.

• Mojo SDI will not be supported with Media Composer, but can still be connected in a co-install configuration for use with Pro Tools.

• If you install and configure Avid Mojo DX or Nitris DX hardware on your system, the editing application does not use any connected Pro Tools audio device for audio input/output operations. You can also use these audio devices with a software-only version of your Avid editing application (Media Composer and NewsCutter).

• If you run into any issues, uninstall both applications and reinstall Pro Tools first, and then reinstall your editing application.

• Media Composer v5.0 and later and Pro Tools v8.0.3 and later do not include support for the

Original Mbox. If you want to use the Original Mbox, you should use Media Composer v4.x and Pro Tools v8.0.1 instead.

• If you want to install your Avid editing application on a system with the Pro Tools Avid

Video Engine installed, you must use one of the following configurations:

Media Composer v5.5/NewsCutter v9.5 and later with Pro Tools v9.0 or later.

Media Composer v5.0.x/NewsCutter v9.0.x with Pro Tools v8.5 or earlier.

30

Co-installation Configurations and Audio Device Support

Co-installation Configurations and Audio Device

Support

Avid Pro Tools Applications

Pro Tools

Product

MC/NC

Software

Only

MC/NC with Mojo

DX

MC/NC/

Symphony with Nitris DX

Pro Tools

Software Only

Pro Tools|HD

Native

Pro Tools|HD, with chassis

Co-install Co-install

Co-install/

Audio Device

Co-install

Pro Tools|HD Co-install/

Audio Device

Co-install

Co-install

Co-install

Co-install

Not Tested Not Tested Not Tested

Avid Mbox Family Audio Devices (3rd Generation)

Audio

Device

(Interface)

MC/NC

Software

Only

MC/NC with

Mojo DX

MC/NC/


Co-install Mbox

(USB)

Co-install/

Audio Device

Co-install

Mbox Pro Co-install/

Audio Device

Co-install

Mbox Mini

(USB)

Co-install/

Audio Device

Co-install

Co-install

Co-install

Avid Mbox 2 Family Audio Devices

Audio

Device

(Interface)

MC/NC

Software

Only

Mbox 2

(USB)

Co-install/

Audio Device

MC/NC with

Mojo DX

MC/NC/



31

External Controllers

Audio

Device

(Interface)

MC/NC

Software

Only

MC/NC with

Mojo DX

MC/NC/


Co-install Mbox 2 Pro

(1394)


Mbox 2

Mini (USB)

Co-install/

Audio Device

Co-install

Mbox 2

Micro

(USB)


Co-install

Not tested

Other Avid Audio Devices

Audio

Device

(Interface)

MC/NC

Software

Only

MC/NC with

Mojo DX

MC/NC/


Digi 002

(1394)

Co-install/

Audio Device

(Windows)


Digi 003

(1394)

Co-install Co-install Co-install

Eleven Rack

(USB)

Not Supported Not Supported Not Supported

Fast Track

Pro (USB)

Audio Device Not Supported Not Supported

External Controllers

Your Avid editing application supports the following external fader controllers or mixers for automation gain and pan recording or as control surfaces:

• Digi 002 (Windows only — Media Composer and NewsCutter)

• Command|8

• Avid Artist Control

• Avid Artist Mix

• Avid Artist Transport

32


• Avid Artist Color

• JL Cooper MCS-3000X MIDI automation controller

• JL Cooper FaderMaster Pro MIDI automation controller

• Yamaha ® 01V/96 and Yamaha 01V digital mixing console n

The JL Cooper controllers and Yamaha mixing consoles do not support automation pan recording.

External controllers or mixers are optional. They are not required for you to perform automation gain or pan recording on an Avid editing system.

The following table compares Avid external controllers and mixers.

Feature

Digi 002

(MC/NC only) Command|8

Avid Artist

Control

Avid Artist

Mix

Avid Artist

Transport

Yes Yes Control surface for transport controls and other functions

Yes

Provides audio play, input, and output

Yes

Record automation gain

Yes

Record automation pan

Yes

Flying faders Yes (8)

Touch-sensitive faders

Yes

Touch-sensitive panners

No

Solo/mute Yes

Supports audio mixing

No a

Latch mode

(also known as

Snap mode)

Yes

No

Yes

Yes

Yes (8)

Yes

No

Yes

No

Yes

No

Yes

Yes

Yes (4)

Yes

Yes

Yes

No

Yes

Yes

(transport only, no soft keys)

Yes

No No

Yes

Yes

Yes (8)

Yes

Yes

Yes

No

Yes

No

No

No

No

No

No

No

No

Avid Artist

Color

33


Feature

Number of steps of fader accuracy

Digi 002

(MC/NC only) Command|8

Avid Artist

Control

Avid Artist

Mix

Avid Artist

Transport

1024 1024 1024 1024 Not applicable

Avid Artist

Color a. The Digi 002 can be used as a standalone audio mixer but not at the same time as it is being used as an automation gain or automation pan controller or control surface.

The following table compares supported third-party external controllers and mixers.

Feature FaderMaster Pro MCS-3000X Yamaha 01V/96 and Yamaha 01V

No No Control surface for transport controls and other functions

No

Provides audio play, input, and output

No

Record automation gain

Record automation pan

Flying faders

Yes

No

No

Touch-sensitive faders

Solo/mute

Supports audio mixing

Latch mode (also known as

Snap mode)

Number of fader steps of accuracy

No

Yes

No

No

128

No

Yes

No

Yes

Yes

Yes

No

Yes

1024

No

Yes

No

Yes

No

Yes a

Yes

No

256 a. For Yamaha fader/controllers, solo works only if you do not use the unit for audio mixing at the same time

For more information on using these external fader controllers or mixers, see “Recording

Automation Gain or Automation Pan Information” in the Help.

34

Setting up the NVIDIA Card

Setting up the NVIDIA Card

To set up the NVIDIA card, you must make sure you have the correct display driver version

(install the display driver if necessary, and set the correct display settings. This version of the editing application requires the following Nvidia Driver: v310.90

Prior to setting up the NVIDIA card, check to make sure you have the correct display driver version. If you do not have the correct NVIDIA driver, you can install it from the Utilities folder that installs with your Avid application.

Installation files for these drivers are installed in the folder Program Files\Avid\Utilities\nVidia.

To check the NVIDIA display driver version:

1. Right-click the Desktop and select NVIDIA Control Panel. You can also open the Windows

Control Panel and double-click the NVIDIA Control Panel icon.

2. Click System Information at the bottom left corner of the NVIDIA Control Panel.

The version number is listed in the Graphics card information section on the ForceWare version line.

To install the NVIDIA display driver:

1. Navigate to Program Files\Avid \Utilities \nVidia and double-click the folder that corresponds to your operating system.

2. Double-click the file for the applicable driver.

3. Follow the on-screen instructions, and then restart your system.

To setup multiple displays:

1. Right-click the Desktop, and select Nvidia Control Panel.

2. In the settings window in the left of the window, click Set up multiple displays.

3. Select or deselect the desired monitors listed.

To set Desktop Video Editing Mode:


2. In the menu bar, select Desktop. Enable Desktop>Video Editing Mode.

3. Click Apply.

To set the Prefer Maximum Performance mode and Global Settings:


2. Click Manage 3D Settings.

3. Set Global presets to Base profile.

35

Shared Storage Support

4. In the Global Settings tab, change Power Management mode to Prefer Maximum

Performance.

5. Click Apply.

6. Set the Global preset to 3D App-Video Editing.

7. Click Apply.

Reboot after installing the Nvidia software even if you are not prompted to do so.

Never use the Windows “roll back driver” feature on the Nvidia driver. The driver version must match the rest of the components the Nvidia installer installs.

Shared Storage Support

The editing application has been tested in a shared storage environment with the following.

There is no support for ethernet attached clients in a MediaNetwork environment.

Editing

Application

Operating

System

ISIS

Clients

ISIS

5000

Server

ISIS

2000

Server

Windows 7 64-bit v4.0, v4.2

v4.1, v4.2

Macintosh Lion v10.7.3

Macintosh

Mountain Lion v10.8.x

v.4.0, v4.2

4.2

v3.2, v4.0, v4.0.1, v4.0.3

v3.2, v4.0, v4.0.1, v4.0.3

v3.2, v4.0, v4.0.1, v4.0.3

v4.1, v4.2

v4.1, v4.2

ISIS

7000

Server

v2.4. v4.0, v4.0.1, v4.0.3

Media-

Network

Client

Media-

Network

Server v5.4

v5.1.3

v2.4., v4.0, v4.0.1, v4.0.3

v5.5.1

v5.1.3

v2.4., v4.0, v4.0.1, v4.0.3

not supported

not supported

36

Feature Performance

Feature Performance

A number of features in this editing application are processor-intensive. As a result, you might experience problems if you are working on an older system. The following chart shows the hardware that Avid has successfully qualified when using these features.

Feature

J2K Capture

Description Recommended System

• HP z820 Dual 6 Core or Dual 8 Core

• Lenovo D30 Dual 6 Core or Dual 8

Core

• Lenovo C30 Dual 6 Core or Dual 8

Core

• Dell T7600 Dual 8 Core or Dual 6

Core

• HP z800 Dual 6 Core


Core

• Dell T5500 Dual 6 Core

• Mac Pro Dual 6 Core “Westmere”

37

Feature

Stereoscopic 3D

Feature Performance


For optimal performance with

Stereoscopic 3D, use these higher performance systems. Avid recommends a minimum of 12GB

RAM when using Stereoscopic

3D.



Core


Core


Core

• HP z800 Dual Quad Core, or Dual 6

Core


Core

• HP z400 Single 6 Core


• Dell T3500 Single 6 Core


• Dell T5500 Dual, 2.93GHz Quad

Core

• Mac Pro Dual 6 Core “Westmere”

38

Feature Performance

Feature Description Recommended System

XDCAM HD50 Capture Baseband capture through Nitris

DX, Mojo DX



Core


Core


Core

• HP z800 Dual Quad Core or Dual 6

Core

• Dell T5600 Dual 6 Core Dual 8 Core






Core

• Mac Pro Dual Quad Core “Nahalem” or Dual 6 Core “Westmere”

HD RGB 4444

ProRes 4444

DNxHD 4444

HD RGB capture requires a high end workstation with Nitris DX and fast storage. (The HP z800 and the Dell T5500 have been qualified to successfully play back 2 streams with PIP and

Color Correction effects. The Mac

Pro Dual Quad Core “Nahalem” successfully plays back 2 streams with PIP.)



Core


Core


Core

• HPz800 Dual Quad Core or Dual 6

Core

• Dell T5600 Dual 6 Cor or Dual 8

Core


Core


• Storage: 10Gb Ethernet ISIS,

39

Feature Performance

Feature

AMA (RED)

AMA (QuickTime)

DVCPro HD capture

AVCI-Intra


AMA is a processor intensive operation. Older platforms may not offer optimum performance.



Core


Core


• HP z800 Dual Quad Core, or Dual 6

Core







Core


AMA is a processor intensive operation. Lower end platforms may not offer optimum performance. Highly compressed codecs such as H.264 will exhibit minimal real-time performance.

Recommendation of qualified systems depends on your planned use of this feature. Heavy usage of highly compressed codecs requires the high end systems. (Dual 6 Core or Dual 8 Core systems)

You will get better performance with a dual quad core or dual

6-core system.

Dual Quad Core, Dual 6 Core or Dual 8

Core Systems

AVC-Intra(AVC-I) is a high quality, low bit-rate HD codec and is very CPU intensive.

4-Way MultiCam Playback


Core Systems

Four Stream Playback:


Core Systems

40

Limitations

Limitations

The following limitations apply to the current version of the editing application.

Avid Artist Color

➤

Bug Number: UDevC00157064. Some soft keys do not light up when you use the Avid Artist

Color with your Avid editing application, including the following:

• HSL Shift Layer: all soft keys

• HSL Bank 2 Shift Layer: all soft keys

• Curves: F8 and F9 soft keys

• Curves Shift: F1, F3, F6, and F9 soft keys

• Secondary: F2, F7, F8, and F9 soft keys

• Secondary Shift: all soft keys

The soft keys listed above function normally even when they do not light up.

➤

Bug Number: UDevC00163957. Hue offset color wheels might not appear when you use Artist

Color to enter Color Correction mode the first time after start your Avid editing application. Any parameter update will draw them.

Workaround: When you make any change in a parameter in the Color Correction tool, the color wheels appear.

➤

Bug Number: UDevC00156948. (The F2 soft key (Next HSL Subtab) does not function until after you apply a color correction to your footage. If you press F2 (Next HSL Subtab) on the

Artist Color surface before you apply a color correction, you get a system beep and the subtab does not change.

➤

Bug Number: UDevC00157932. If you use the HSL shift control for trackballs, you might see the trackballs controlling the wrong monitor during shuttle. For example, if you press Shift and then use the right trackball to shuttle, and then move either the left or the center trackball, you might see the other trackballs now control the right monitor.

➤

Bug Number: UDevC00164772. When you first ope n the Color Correction tool, either with the

Artist Color or with the mouse, incorrect color correction values might display in parameter fields. This problem is intermittent, and it does not occur after you change a parameter value.

Workaround: Adjust any parameter. The correct values display in the Color Correction tool.

41

Limitations

➤

Bug Number: UDevC00164954. (Macintosh only): The EuControl application does not open when you select Edit Settings in the Controller Settings dialog box. To configure your EUCON device, you must open the EuControl application by clicking the EUCON icon in the dock, and then selecting Window > EuControl Settings.

Compatibility

➤

Bug Number: UDevC00166431. You might receive AMPI Subsystem errors when launching the editing application. Avid recommends that you refer to the following Knowledge Base article for information on possible causes.

http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=377091

➤

Bug Number: UDevC00151588. You must have the MediaNetwork client installed on your system in order to play linked AMA clips from the MediaNetwork shared storage.

➤

Bug Number: . The Standalone Transfer Manager will be supported with this release, except for compatibility with Airspeed Classic and Open I/O devices.

Effects

➤

Bug Number: . AVX 1 effects are no longer supported and will not be recognized in this latest version of Media Composer. Please contact the respective 3rd-party plug-in vendor for an AVX2

64-bit version of any existing plug-in that you might have purchased. The following Avid AVX1 effects will automatically be promoted to AVX2:

• Avid Pan & Zoom

• Region Stabilize

• RGB Keyer

When you load a previously-generated sequence containing one of these effects, they will automatically be promoted to new corresponding AVX2 effects. These effects will not be recognized by earlier versions of Media Composer.

➤

Modifying Pan Values in the Timeline: You can display different pan values in the Timeline for different audio tracks by clicking the Clip Gain/Pan button in the Track Control panel and selecting one of the pan value options. However, if you want to manipulate pan control points

(either adding a keyframe or adjusting a keyframe), you must make sure all audio tracks display the same pan values. To do this, Alt+click the Clip Gain/Pan button in the Track Control panel for any audio track and select a pan value option.

42

Limitations

Interplay

➤

Interplay v.2.5 support for native HD 23.976p and HD 24p formats now includes their associated proxy resolutions. For more information refer to the Avid Interplay Best Practices Guide.

➤

Bug Number: . (Interplay) Dynamic relink is not currently supported for media that requires pulldown. Therefore, you can only use it with clips where the media has been acquired at the native frame rate (without pulldown).

➤

Bug Number: . (Interplay) Pro Res formats can only be used by Avid editing applications that are in a non-Interplay environment. For any additional limitations regarding running an Avid editing application in an Interplay environment, see the Interplay ReadMe.

➤

Bug Number: UDevC00164931. (Avid Interplay and Windows 7) Can't locate Media Indexer on Avid editor after first install. After an initial installation of the editor and Interplay support software, the editing application may fail to locate the Media Indexer. This can happen if some of the Avid Service Framework services have not started correctly.

Workaround: Open the Workgroup Properties tool on the editor and check whether any of the services are not running. Restart any services as required. Then restart the Avid editing application again. You may have to do this the first few times that you start the editor. After a few times the services will begin starting automatically, even after a reboot.

Media Tool

➤

Bug Number: UDevC00164836. If the Media Tool window is set to Frame view, you might experience slow redraw issues when accessing large volumes of shared storage.

Output

➤

You cannot control down/cross conversion from the Video Output Tool when in TrueP mode for

1080p projects or when you are in Stereoscopic mode.

Workaround: When in stereoscopic mode or have True Progressive output set for 1080p projects, the down-convert and cross-convert options are not available. To output at a rate different than the project format, go to the Format tab and change the output project setting.

PhraseFind

➤

Bug Number: UDevC00166649. For best results with PhraseFind, Avid recommends using

Avid certified storage solution.

43

Limitations

Play

➤

Bug Number: UDevC00164987. After editing for an extended period of time, using the keyboard arrow keys to single step through the sequence might skip frames or move in the wrong direction.

Workaround: Minimize and maximize the editing application or change focus to another application and then back to the editor.

➤

Bug Number: UDevC00153838. You might receive an “Exception: The sequence or one of its source elements is too long to be played” error if you have a sequence over 12 hours.

QuickTime

➤

Bug Number: UDevC00159820. QuickTime Reference movies are not supported by

QuickTime Player X. They are still supported in QuickTime Player 7 on the Macintosh. They are also not supported in QuickTime version 7.6.9 on Windows.

Stereoscopic 3D

➤

A software developer's kit is now available for 3rd-party partners who would like to build AMA plug-ins, AVX2 effects, or develop applications that support stereoscopic 3D media/sequences compatible with Avid Media Composer or Symphony. This developer's kit is available on the

Avid website.

➤

720p Stereoscopic projects are not currently supported with Open I/O hardware from 3rd-party vendors.

➤

Bug Number: UDevC00164741. If a rolling title is used in an Over\Under stereo project, you may get the wrong scaling and cropping of lines.

➤

Stereoscopic projects are not supported on Avid Interplay.

➤

Multicam of stereoscopic clips is not supported.

44

Limitations

➤

NVIDIA 3D Vision

• Avid currently only supports the NVIDIA 3D Vision Home bundle (which includes the 3D glasses, emitter hub and display monitor). The 3D Vision Pro has not been successfully tested.

• Full screen playback on an NVIDIA 3D Vision monitor is only supported on a Windows system.

• Due to an NVIDIA driver issue, the first time that the full screen play window appears, the application will resize to a single monitor. Resize the application as necessary. You can reset your window positions by clicking on a toolset in the menu.

➤

Bug Number: UDevC00161499. Ancillary data output is not supported if you are working in full stereoscopic format.

Timeline

➤

Bug Number: UDevC00164751. If you have a sequence loaded in the Timeline, and you have waveforms on, clicking or dragging in the Timeline does not stop the waveform from drawing.

Workaround: Hold Cmd + . to stop the waveform from drawing.

User Interface

➤

Bug Number: UDevC00162819. You cannot copy and paste timecode values into the Source or

Record monitors. To enter timecode in the monitors, select the monitor and then type in the appropriate timecode values.

➤

Bug Number: UDevC00164678. You can drag audio keyframes past adjacent audio keyframes.

Moving an audio keyframe past another keyframe causes the keyframes to swap values. For example, set volume levels on two audio keyframes: Keyframe A for low volume (left keyframe) and Keyframe B for high volume (right keyframe). If you then drag Keyframe A to the right of

Keyframe B, Keyframe A now displays the higher volume level.

➤

Bug Number: UDevC00164995. (Macintosh only) If you load a group clip into the Source monitor while in MultiCamera mode, the monitor displays the clip as if MultiCamera mode is still selected, although the action of loading the group clip actually causes the Avid editing application to enter Source/Record mode. If you play back the clip, you only see the linecut and cannot perform MultiCamera edits.

Workaround: To turn off the Multicamera mode display, select Special > Multicamera Mode, and make sure MultiCamera Mode is not selected.

45

Documentation Changes

➤

Bug Number: UDevC00165159. (Macintosh only) If you render a sequence containing a title by selecting Clip > Render In/Out or by right-clicking the sequence and selecting Render In/Out, the progress bar displaying the status of the render operation does not update and the application appears to become unresponsive. However, even though the progress bar does not advance, the rendering operation continues. When it completes, the progress bar closes.

Documentation Changes

The following documentation changes were made after the initial documentation release was finalized. These will be corrected in the next release of the product.

Lassoing Segments in NewsCutter

When selecting a segment in the NewsCutter editing application Timeline, drawing a lasso from left to right selects the segment. If you have the Keyframe Selection tool enabled, drawing a lasso from left to right, selects the audio keyframes within the segment.

n

Disable the Keyframe Selection Tool to enable selecting segments.

Committing Assets to an Export Volume

In the What’s New for v6.5, the topic “Committing Assets To an Export Volume” should have stated that once you commit the assets, the sequence is flattened to the OP1b format, the video is encoded to the codec set in the selected shim and audio saved as PCM.

46

Documentation Changes

Legal Notices

Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology, Inc.

This product is subject to the terms and conditions of a software license agreement provided with the software. The product may only be used in accordance with the license agreement.

This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents .

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of Avid Technology, Inc.

Copyright © 2013 Avid Technology, Inc. and its licensors. All rights reserved.

Portions © Copyright 2003-2007 of MOG Solutions.

Attn. Government User(s). Restricted Rights Legend

U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or

“commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf of a unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms of the

License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.

Trademarks

003, 192 Digital I/O, 192XD I/O, 888 I/O, AirPlay, AirSPACE, AirSPACE HD, AirSpeed, ALEX, Alienbrain, AniMatte, AudioMarket,

AudioPages, AudioSuite, AudioVision, AutoSync, Avid, Avid Advanced Response, Avid DNA, Avid DNxcel, Avid DNxHD, AVIDdrive,

Avid DS Assist Station, Avid EditStar, Avid Learning Excellerator, Avid Liquid, Avid Liquid Chrome Xe, Avid MEDIArray, Avid Mojo,

AvidNet, AvidNetwork, Avid NewStar, Avid Remote Response, AVIDstripe, Avid Unity, Avid Unity ISIS, Avid VideoRAID,

Avid Xpress, AVoption, AVX, Beauty Without The Bandwidth, Boom, C|24, CaptureManager, ChromaCurve, ChromaWheel,

Command|24, Conectiv, CountDown, DAE, Dazzle, Dazzle Digital Video Creator, Deko, DekoCast, D-Fi, D-fx, DigiDelivery,

Digidesign, Digidesign Audio Engine, Digidesign Intelligent Noise Reduction, DigiDrive, DigiLink, DigiMeter, DigiSerial, DigiStudio,

DigiStudio Control, Digital Nonlinear Accelerator, DigiTranslator, DINR, DNxchange, do more, DVD Complete, D-Verb, Eleven,

Equinox, EveryPhase, ExpertRender, Fastbreak, Fast Track, FieldPak, Film Composer, FilmScribe, Flexevent, FluidMotion, FXDeko,

G7, G-Rack, HD Core, HD Process, HDPack, HYBRID, HyperControl, HyperSPACE, HyperSPACE HDCAM, IllusionFX,

Image Independence, iNEWS, iNEWS Assign, iNEWS ControlAir, Instantwrite, Instinct, Intelli-sat Broadcasting Recording Manager,

Intelli-Sat, InterFX, Interplay, inTONE, Intraframe, iS9, iS18, iS23, iS36, ISIS, IsoSync, KeyRig, KeyStudio, LaunchPad, LeaderPlus,

Lightning, ListSync, Lo-Fi, Magic Mask, Make Anything Hollywood, make manage move | media, Marquee, M-Audio, M-Audio Micro,

Maxim, Mbox, MCXpress, Media Browse, Media Composer, MediaDock, MediaDock Shuttle, Media Fusion, Media Illusion,

MediaLog, Media Reader, Media Recorder, MEDIArray, MediaShare, MediaStream, Media Suite, Meridien, MetaFuze, MetaSync,

MicroTrack, Midiman, MissionControl, Mix Rack, MixLab, Moviebox, Moviestar, NaturalMatch, Nearchive, NetReview, NewsCutter,

Nitris, NRV-10 interFX, Octane, OMF, OMF Interchange, OMM, OnDVD, Open Media Framework, Open Media Management,

Palladium, Pinnacle, Pinnacle DistanTV, Pinnacle Geniebox, Pinnacle HomeMusic, Pinnacle MediaSuite, Pinnacle Mobile Media,

Pinnacle Studio, Pinnacle Studio MovieBoard, Pinnacle Systems, ProEncode, ProServices, ProSessions, Pro Tools, QuietDrive,

Recti-Fi, Reel Tape Delay, Reel Tape Flanger, Reel Tape Saturation, RetroLoop, rS9, rS18, Salesview, Sci-Fi, Scorch, Scorefitter,

ScriptSync, SecureProductionEnvironment, Session, Show Center, Sibelius, SIDON, Soft SampleCell, Soft-Clip Limiter,

Sound Designer II, SPACE, SPACEShift, SpectraGraph, SpectraMatte, Sputnik, Starplay, SteadyGlide, Streamfactory, Streamgenie,

StreamRAID, Strike, Structure, Studiophile, SubCap, Sundance Digital, Sundance, Symphony, SYNC HD, SynchroScience,

SynchroScope, Syntax, TDM FlexCable, Thunder, Titan, Titansync, TL Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase,

TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities, Torq, Torq Xponent, Transfuser, Trigger Finger, Trillium

Lane Labs, TruTouch, UnityRAID, Vari-Fi, Velvet, Venom, VideoRAID, Video Slave Driver, VideoSPACE, VideoSpin, Vortx, Xdeck,

X-Form, Xmon, Xponent, and X-Session are either registered trademarks or trademarks of Avid Technology, Inc. in the United

States and/or other countries.

Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks contained herein are the property of their respective owners.

Avid Media Composer, NewsCutter, and Symphony ReadMe • Part Number 9329-65261-00B • 9/25/13

47

README_Avid_editor_v6.5.4_v10.5.4.pdf

Avid

Editing Application

®

®

™

Contents

Symbols and Conventions

If You Need Help

Changed in v6.5.4 and v10.5.4

Important Compatibility Information for Macintosh Editor v6.5.4

XDCAM EX 35 Capture

Fixed in Media Composer v6.5.4, Symphony v6.5.4, and NewsCutter v10.5.4

Changed in v6.5.3 and v10.5.3

Change to AVCHD AMA Plug-In

Location Change of QuickTime and AVCHD AMA Plug-In

Updated NVIDIA Driver

Tape ID Character Limit

Fixed in Media Composer v6.5.3, Symphony v6.5.3, and NewsCutter v10.5.3

New in Media Composer v6.5, Symphony v6.5, and

NewsCutter v10.5

AMA Plug-ins

Audio Device Drivers

Before Installing the Editing Application

Notes on Macintosh OS

Notes on Windows 7 OS

Disabling Desktop Compositing

Standard User

Notes on Software Licensing

If You Upgrade Your Operating System

Minimum RAM Recommendation

Qualified Hardware and Operating Systems

Macintosh OS Permission Information

Macintosh v10.8 and AVCHD

Qualified PC Workstations with Avid Media Composer, Avid Symphony, and Avid NewsCutter

Qualified PC Notebooks for Avid Media Composer, Avid Symphony, and

Avid NewsCutter

Qualified Macintosh Workstations for Avid Media Composer and Avid

Symphony

Qualified Macintosh Notebooks for Media Composer and Avid Symphony

Compatibility Chart

Avid Editing Application Compatibility with

Pro Tools

Co-installation Configurations and Audio Device

Support

External Controllers

Setting up the NVIDIA Card

Shared Storage Support

Feature Performance

Limitations

Avid Artist Color

Compatibility

Effects

Interplay

Media Tool

Output

PhraseFind

Play

QuickTime

Stereoscopic 3D

Timeline

User Interface

Documentation Changes

Lassoing Segments in NewsCutter

Committing Assets to an Export Volume

Related manuals

Avid Media

Media Composer Video Editing Software

Avid NewsCutter

NewsCutter 1.5 Windows NT

Avid NewsCutter

NewsCutter 2.0

Table of contents