Universal Remote TRC-780 Owner`s manual

Owner’s Manual
TRC-780
TRC-780 Owner’s Manual © 2015 Universal Remote Control, Inc.
The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent
from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN
THIS MANUAL.
The information in this Owner’s Manual may be subject to change without prior
notice.
Total Control is a registered trademark of Universal Remote Control, Inc.
URC - Control the Experience is a registered trademark of Universal Remote
Control, Inc.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OF CONTENTS
Congratulations!
1
Displaying the Settings Screen
2
Color Screen
2
Button Light
3
System
4
Button Beep
4
Date/Time
5
Erasing and Resetting
5
Join to Network
6
Specifications
6
Limited Warranty Statement
7
End User Agreement
9
Federal Communication Commission
Interference Statement
10
Declaration of Conformity
11
TRC-780 OWNER’S MANUAL
Congratulations!
You’ve purchased a unique synthesis of hardware and software
engineering, the Total Control TRC-780. The TRC-780 achieves a
magnificent combination of power and flexibility by simplifying
and automating the operation of even the most complex systems.
The MRX-10 controller is required to make the TRC-780 work. The
combination of the TRC-780 and MRX-10 create a robust and
poweful system.
Backlit Color OLED Screen Buttons
When any button is pressed, the color OLED screen as well as the
remote buttons light up. Once the screen is lit, each of the six buttons
on either side of the screen will have a label. These button labels
change based on what you are watching or listening to. Thus, if you
have selected Watch TV, you will see a list of buttons that are useful to
that activity. If you are listening to your iPod through a PSX-2, you will
be able to browse the iPod content.
RF “No Rules” Operation
The TRC-780 communicates directly to the MRX-10 via 2.4 GHz
bidirectional RF. This gives the TRC-780 the ability to control your
system without being in direct line of sight of the equipment.
Your custom installer may have installed a ZR-1 Repeater to improve
communication between the TRC-780 remote controls and the
MRX-10 in your system.
Replacing the Batteries
Unlock the battery cover by pushing up on the spring lock at the
bottom of the cover. Remove the cover.
Observe the + and – polarity indicators inside the battery compartment and the batteries. Place the
four AA batteries into their positions in the battery compartment.
Now, replace the battery cover and
snap it into place.
Page 1
TRC-780 OWNER’S MANUAL
Displaying the Settings Screen
You can adjust settings of the TRC-780 whenever
you like by pressing and holding the MAIN + ENT
button for three seconds. When you do the screen
will change to the Settings Menu. If you do not press
any button on the Settings screen, the TRC-780 will
beep signifying a time-out after 30 seconds and
return to the previous setting or main screen.
There are two pages of Settings screens. To access
the other page, press either of the page buttons.
To select a setting, press the corresponding button.
To go back a step or to get out of the settings screen,
press either the MAIN button or the EXIT button on
the TRC-780.
Color Screen
Color screen settings give two configurable options.
1. Brightness: Adjust the screen brightness by
pressing the screen buttons on the left and right
side of the slider bar. Once the brightness is
adjusted, press the Save button.
Pressing the Cancel button will revert to the
remotes last saved brightness setting.
Note: The higher the brightness, the faster the
batteries will deplete.
2. Automatic Turn Off: Adjust the duration the
OLED screen will stay illuminated after a button
is pressed. Pressing the left and right screen
buttons, next to the slider bar, will change how
long the OLED screen will stay on.
Pressing the Less side will decrease the time in
Page 2
TRC-780 OWNER’S MANUAL
steps down to a minimum time of 5 seconds.
Pressing the More side will increase the time in
steps up to a maximum of 60 seconds. Once the
setting is adjusted, press the Save button. Pressing
the Cancel button will revert the remote’s Automatic
Turn Off setting to the last saved setting.
Note: The longer the OLED screen stays on, the faster
the batteries will deplete.
Button Light
The Button Light settings page provides two
configurable options for how the TRC-780’s
hard buttons should behave.
1. Automatic ON: Adjusting this setting will
control when the hard button backlight
turns on.
a. Automatic Light Yes: Every time a
button is pressed the button back light will
automatically turn On.
b. Automatic Light No: The only way to turn on the hard
button back-light is to press the dedicated Lights button
located on the right side of the remote control.
Once all changes have been made, press the Save button.
Pressing the Cancel button will revert to the remotes last saved
setting.
Note: The more often the back light turns On, the faster the
batteries will deplete.
2. Automatic Turn Off: You can adjust the amount of time the backlight will remain after a button is pressed.
Press the left and right screen buttons next
to the slider bar to change the duration.
Pressing the Less side will decrease the time
in steps down to a minimum of 5seconds.
Pressing the More side will increase the time
in steps up to a maximum of 60 seconds.
Once the setting has been adjusted, simply
press the Save button. Pressing the Cancel button will revert to
the remote’s last saved Automatic Turn off setting.
Note: The longer the backlight stays on, the faster the batteries
will deplete.
Page 3
TRC-780 OWNER’S MANUAL
System
The System Settings page provides two options.
1. Power Remaining: This option shows you
how much battery life is remaining. You
can adjust when the low battery warning
screen will appear by pressing the screen
buttons to the left and right of the slider bar.
The battery indicator will blink when the
batteries are low and need to be replaced.
Once the setting is adjusted, press
the Save button. Pressing the Cancel button will revert to the
remotes last saved Power Remaining setting.
2. System Info: The System Info screen
displays data about the TRC-780’s memory
usage, and operating system version.
Pressing the Next screen button will take
you to the Operating System information,
and pressing the Prev button will take you
back to the System Memory information.
Button Beep
Use the screen buttons to the left and right of
the slider bar to adjust the button sound.
Once the setting is adjusted, press the Save
button. Pressing the Cancel button will revert
to the remotes last saved button beep setting.
Page 4
TRC-780 OWNER’S MANUAL
Date/Time
The Date and Time are automatically sent from the
MRX-10 to the TRC-780. If you would like to
adjust the date or time you can do so on the
remote control. Note: Any Date or Time adjustment made on the TRC-780 will automatically go
out to all the other remotes and keypads in the
system.
1. Change Date: Tap the button beside Day, Month,
or Year, then use the numeric keypad to enter
in the new date information. When you are
finished, press the Save button.
2. Change Time: Tap the button beside Hour of
Minutes, then use the numeric keypad to enter
in a new time. Set AM/PM by toggling the
button. When you are finished, press the Save
button.
3. Display Date/Time: The TRC-780 can display
either the Date or Time, but not both.
Select which one you would like to display.
Press the screen button next to Date or Time.
Once you are finished, press the Save button.
Erasing and Resetting
WARNING! Only use this button when instructed by Technical
Support. It resets the memory of the TRC-780 to
the factory condition. All your programming
will be lost!
To set the remote to its factory default setting,
press "Erase." A secondary screen opens and
requires your confirmation.
Page 5
TRC-780 OWNER’S MANUAL
Join to Network
This feature is only used by the installer at the
remote's initial setup. You will only need to
access this screen if directed by your installer or
technical support. Press the main button to exit
the Join to Network screen. If you do not press a
button, it will timeout after 5 minutes.
Specifications
Microprocessor: ARM7TDMI
RAM: 8Mbit SRAM
FLASH: 32Mbit Nor FLASH
Display: 1.46” PMOLED (128 x 128)
RF Range (radio frequency): 50 to 100 feet, depending upon the
environment
RF Frequency: 2.45GHz (Two-way RF)
Provides: 2-Way communication with MRX-10 (or higher) network
system controller.
Weight: 8.5 oz. (with battery)
Size: 8.7”H x 2.2”W x 1.3”D
Battery Life: 18 Hours of continuous button pressing with backlighting and LCD ON (months of use for most users).
Users should expect some variation based on the
brand of alkaline batteries used.
Note: In actual use, the TRC-780 protects itself if it gets stuck
between couch cushions (with a button being continuously
pressed). After 30 seconds the TRC-780 will turn off, and will
not turn on again until the button is released.
Page 6
TRC-780 OWNER’S MANUAL
Limited Warranty Statement
1. Limited Warranty and Disclaimers
Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free
from defects in material and workmanship under normal usage for two (2) years from
purchase when such is purchased from URC. This limited warranty is valid only in the
United States of America. URC warrants that the software will substantially conform in
any material respect to its functional specifications at the time of delivery. URC SHALL
NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS
AND/OR OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES
NOT WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE
OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the URC software
complied with all applicable regulations and policies of the Federal Communications
Commissions (“FCC”) regarding electromagnetic interference caused by
electronic/computing devices and to the extent that the URC equipment and/or the
URC software fails to so comply, URC shall, at its own expense, take all reasonable
measures to promptly cause such to comply.
URC equipment purchases from other than an authorized URC dealer or distributor
are without warranty.
THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR
HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR
HEREIN, THE EQUIPMENT, SOFTWARE AND DOCUMENTATION OF URC
ARE SUPPLIED “AS IS” WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR
IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS,
STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. URC DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE
OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN TERMS OF
CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE
SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR
IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS,
STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR
Page 7
TRC-780 OWNER’S MANUAL
OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE
GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT
COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II)
MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV)
BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC
WARRANTY CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end user in whole
or in part, where such are restricted or excluded by applicable law and such shall apply
to the maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the URC
equipment using new or comparable rebuilt parts, or exchange the URC equipment
for new or rebuilt equipment. In the event of a defect, these are the end user’s
exclusive remedies.
All the URC equipment returned for service, exchange or repair require an RGA
number. To obtain an RGA number, you must complete a Return Request Form
which you may obtain by calling (914) 835-4484 or contacting URC at
returnrequest@universalremote.com. To obtain warranty service, end user must deliver
the URC equipment, freight prepaid, in its original packaging or packaging affording
adequate protection to URC at 420 Columbus Avenue, Valhalla, NY 10595. It is the
end user’s responsibility to backup any macro programming, artwork, software or other
materials that may have been programmed into the unit. It is likely that such data,
software, or other materials will be lost during service and URC will not be responsible
for any such damage or loss. A dated purchase receipt, bill of sale, installation contract
or other verifiable proof of purchase is required. For the URC equipment support and
other important information, please visit URC's website available at
www.universalremote.com or call the Customer Service Center at (914) 835-4484.
This limited warranty only covers the URC equipment issues caused by defects in
material or workmanship during ordinary consumer use. It does not cover product
issues caused by any other reason, including but not limited to product issues due to
commercial use, acts of God, third-party installation, misuse, limitations of technology,
or modification of or to any part of the URC equipment. This limited warranty does not
cover the URC equipment sold as used, as is, refurbished, so called "B stock" or
consumables (such as batteries). This limited warranty is invalid if the factory applied
serial number has been altered or removed from the URC equipment. This limited
warranty specifically excludes the URC equipment sold by unauthorized resellers.
With the exception of URC’s IR-only, broad-based consumer remotes, none of URC’s
PC programmable remotes or any of our Total Control® whole-house equipment are
Page 8
TRC-780 OWNER’S MANUAL
authorized for online internet sales. Buying URC’s PC programmable remotes or any of
our Total Control® whole-house equipment online means buying equipment that does
not have a URC’s limited warranty. Such equipment is not eligible for URC tech
support or software support, either.
2. URC’S Limitations of Liability
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL,
EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR
LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA,
COMPUTER SYSTEMS OR COMPUTER PROGRAMS. URC’S LIABILITY, IF ANY,
FOR DIRECT DAMAGES OF ANY FORM SHALL BE LIMITED TO ACTUAL
DAMAGES, NOT IN EXCESS OF AMOUNTS PAID BY END USER FOR THE URC
EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF END
USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE
OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR EXCLUDED BY
APPLICABLE LAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY
OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER. THIS
LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END
USER MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR
JURISDICTION TO JURISDICTION.
End User Agreement
The terms and conditions of the End User Agreement are available at
www.universalremote.com/eua.php shall apply.
Page 9
TRC-780 OWNER’S MANUAL
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one more of the following measures:
u Reorient or relocate the receiving antenna.
u Increase the separation between the equipment and receiver.
u Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
u Consult the dealer or an experienced radio/TV technician for
help.
Warning!
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the
equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate
equipment.
Federal Communication Commission (FCC) Radiation Exposure Statement
This remote device is approved as a hand-held and hand-operated only
portable (relative to hand) device which is normally operated at 5 cm
from a person’s body.
Page 10
TRC-780 OWNER’S MANUAL
Declaration of Conformity
Company Name
:
Universal Remote Control Inc.
Company Address
:
Contact Info rmation
:
500Mamaroneck Avenue, Harrison, NY 10528, U.S.A
www.universalremote.com
Brand Name
:
Phone: (914)835-4484 Fax: (914)835-4532
UNIVERSAL remote control
Product Name
:
RF Remote Controller
Model Name
:
TRC-780
This product herewith complies with the requirements of EMC Directive (2004/108/EC)
and R&TTE Directive(1995/5/EC) issued by the Commission of the European Community
Compliance with these directives implies conformity to the following European Community
n­EMC Directive
l­EN 55022(2010)
l­EN 55024(2010)
l­AS/NZS CISPR 22(2009)+A1(2010)
n­R&TTE Directive
l­EN 60950-1(2006) + A11(2009) + A1(2010) + A12(2011)+A2(2013)
l­ETSI EN 62479(2010)
l­ETSI EN 301 489-1 V1.9.2(2011)
l­ETSI EN 301 489-17 V2.2.1(2012)
l­ETSI EN 300 328 V1.8.1(2012)
List of test reports and/or certificate verified compliance with the standards above
n­EMC Directive
­
l­Report No.
l­Testing Laboratory
: Gumi College EMC Center
n­R&TTE Directive
l­Certificate No.
l­Certificate Body
: TUV Rheinland (No. 0197)
Date of issue
:
Name and signature of authorized person
:
January 9, 2015
Quality Assurance Team
OHSUNG ELECTRONICS CO., LTD.
Page 11
NOTE
Page 12
NOTE
Page 13
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
OCE-0066D Rev 05