Samsung AH68-01957C Operating instructions

DVD HOME
THEATER SYSTEM
HT-X50
If you have any questions
or comments
please contact the SAMSUNG
relating to Samsung
customer
products,
care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com
_ynet
AH68-01957C
REV: 00
DIGITAL
_f[=] I=[o][dl[=.]
inn
+
_dtts
Digital Surround
AUDIO/VIDEO
DIGITAL
AUDIO
OlSC PLAYBACK
Precautions
Safety Warnings
Important Safety Instructions
Z_
1
RiSK OFDO
ELECTRIC
SHOCK.
NOT OPEN
Read these operating instructions
carefully before using
TO REDUCE THE RISK OF ELECTRIC SHOCK,
the unit. Follow all the safety instructions
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
Keep these operating
instructions
listed below.
handy for future
reference.
REFER SERVICING TO QUALIFIED SERVICE
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
inside the product that presents a risk of
4)
Follow all instructions.
electric shock or personal
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
PERSONNEL.
This symbol indicates "dangerous
injury.
This symbol indicates important
accompanying
voltage"
instructions
the product.
7)
Do not block any ventilation openings,
accordance
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
8)
as a CLASS 1
Do not defeat the safety purpose of the polarized or
grounding-
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS
CLASS 1
1 LASER
LASER APPARAT
PRODUCT
PRODUCTO LASER CLASE 1
adjustments
or performance
procedures other than those specified
in hazardous radiation exposure.
CAUTION
or other apparatus (including
amplifiers) that produce heat.
9)
Use of controls,
: INVISIBLE
type plug. A polarized plug has two blades
with one wider than the other. A grounding
has two blades and a third grounding
1
blade or the third prong are provided for your safety.
consult an electrician
of
herein may result
for replacement
LASER RADIATION WHEN OPEN
pinched particularly
receptacles,
for proper
grounding
and,
in particular, specifies that the cable ground shall
be connected to the grounding system of the building,
as close to the point of cable entry as practical.
WARNING
at plugs, convenience
the apparatus.
specified by
--O_" J_'.',""
bracket, or table specifi ed by
the manufacturer,
or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination
to avoid injury from tip-over.
unused for Iong periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus
CAUTION
Apparatus
shall not be exposed to dripping
has been
damaged in any way, such as the power-supply
or splashing
'.
12) Use only with the cart, stand, tripod,
13) Unplug this apparatus during lightning storms or when
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
Voltage peaks due to lightning could damage the unit.
The Mains plug is used as a disconnect device and shall
stay readily operable at any time.
the manufacturer.
This reminder is provided to call the CATV system
installer's attention to Section 820~40 of the NEC
During thunderstorms, disconnect the AC main plug from
the wail outlet.
and the point where they exit from
1!) Only use attachments/accessories
guidelines
of the obsolete
outlet.
10) Protect the power cord from being walked on or
Note to CATV system installer
provides
type plug
prong. The wide
If the provided plug does not fit into your outlet,
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
which
Install in
instructions.
Do not install near any heat sources such as
radiators, heat registers,
LASER product.
I
with the manufacturer's
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on modules or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the Home Theater to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove
the main plug from the wall outlet, especially when left unused for a long period of time.
cord
or plug is damaged, liquid has been spilled or objects
and no objects filled with liquids, such as vases, shall
have fallen into the apparatus.
be placed on the apparatus.
if the apparatus has been exposed to rain or moisture,
Service is also required
does not operate normally, or has been dropped.
Protectthe player frommoisture(i.e,vases), and excessheat
(e g.firepIace)or equipmentcreatingstrongmagneticor electricfields
(i.e speakers...).Disconnectthe powercablefrom theAC supply if the
player malfunctions.Yourplayeris not intendedfor industrialuse.
Useof this productis for personaluse only.
Condensationmay occur ifyour playeror dischas beenstoredincold
temperatures.
if transportingthe playerduringthe winter,wait approximately2 hours
until the unit has reachedroom temperaturebefore using.
The batteries used with this product contain chemicals that are
harmful to the environment.
Do not dispose of batteries in the general household trash.
Features
Contents
Multi-Disc Playback & FM Tuner
The HT-X5O combines
MP3-CD,
WMA-CD,
the convenience
DivX, CD-R/RW,
of multi-disc
playback
and DVD-R/RW,
capability,
including
with a sophisticated
DVD-AUDIO,
DVD-VIDEO
CD,
FM tuner, all in a single player.
DVD-Audio compatible
Experience
the super high-quality
The on-board
24-bit/192kHz
low-level resolution
audio perfom_ance
DAC enables
and high-frequency
of DVD-Audio.
this player to deliver exceptional
sound quality in terms of dynamic
range,
Safety Warnings ............................................................ 2
Settings ........................................................................ 40
Precautions .................................................................... 3
Setting the Language .............................................. 40
Features ......................................................................... 4
Setting TV Screen type ........................................... 41
Notes on Discs .............................................................. 6
Setting Parental Controls (Rating Level) .................42
Description ..................................................................... 8
Setting the Password .............................................. 42
Setting the Wallpaper .............................................. 43
detail.
To SeIect One of the 3 Wallpaper Settings
you've made ............................................................ 43
USB Host Play
Connecting the Speakers ............................................ 12
You can enjoy media files such as pictures,
by connecting
movies and tunes saved in an MP3 player, digital camera or USB memory
the storage device to the USB port of the home theater.
Connecting the Optional Wireless
Receiving Amplifier ...................................................... 14
Connecting the Video Out to your TV ......................... 16
Dolby Pro Logic II
audio signal decoding
technology
that improves
Setting the Speaker Mode....................................... 44
Setting the Delay Time ............................................ 45
Setting the Test Tone............................................... 46
upon existing
Connecting Audio from External Components ............18
Dolby Pro Logic.
Connecting the FM Antenna ........................................ 20
DTS (Digital Theater Systems)
DTS is an audio compression
5.I channel sound.
format developed
in stop mode
switches
Setting the Audio ..................................................... 47
Setting the DRC (Dynamic Range Compression)...48
Setting the AV SYNC ............................................... 48
by Digital Theater
Systems
Setting the HDMI Audio ........................................... 49
Inc. It delivers full-frequency
TV Screen Saver Function
The HT-X50 automatically
DivX (R) registration ................................................ 44
HDMI Function ............................................................. 17
Dolby Pro Logic II is a form of multi-channel
If the main unit remains
DVD Playback Mode ............................................... 44
for 3 minutes,
Samsung
logo appears on TV screen.
Before Reading the User's Manual .............................21
Sound Field (DSP)/EQ Function ................................. 50
Before Using Your Home Theater ...............................22
Dotby Pro Logic II Mode .............................................. 51
Disc Playback .............................................................. 23
Dolby Pro Logic I! Effect .............................................. 52
MP3/WMA-CD Playback ............................................. 24
itself into the power saving mode after 20 minutes in the Screen Saver mode.
JPEG File Playback ..................................................... 25
DivX Playback ............................................................. 26
Power Saving Function
The HT-X5O automatically
shuts itself off after 20 minutes
in Stop mode.
Customized TV Screen Display
The HT-X5O allows you to select your favorite
image during JPEG or DVD playback
and set it as your background
wallpaper.
HDMI
HDM! transmits
DVD video and audio signals simultaneously,
and provides
Using the Playback Function ....................................... 28
Listening to Radio ........................................................ 53
Displaying Disc Information ...................................... 28
Convenient Functions .................................................. 55
Checking the Remaining Time .................................. 29
Operating a TV with the Remote Control .................... 56
Fast Playback ........................................................... 29
Troubleshooting ........................................................... 58
Stow Playback .......................................................... 29
Cautions on Handling and Storing Discs ..................... 60
Skipping Scenes/Songs ............................................ 30
Language Code List .................................................... 61
Repeat Playback....................................................... 31
USB Host Feature Supported Products ...................... 62
To Select a Repeat Playback Mode in the Disc
Specifications ............................................................... 63
Information Screen ................................................... 31
a clearer picture.
A-B Repeat Playback ................................................ 32
AV SYNC Function
Step Function ............................................................ 32
Video may lag behind the audio if the unit is connected
To compensate
Angte Function .......................................................... 33
to a digital TV.
Zoom (Screen Enlarge) Function .............................33
for this, you can adjust the audio delay time to sync up with the video.
EZ VIEW Function .................................................... 34
Anynet+ (HDMI-CEC) Function
Anynet+
is a function
that can be used to operate the main unit using a Samsung
Home Theater to a SAMSUNG
that support Anynet+.)
TV using an HDM! Cable. (This is only available
Bonus Group ............................................................. 34
TV rernote control,
with SAMSUNG
TVs
by connecting
the
Navigating Pages ...................................................... 34
Audio Language Selection Function .........................35
Subtitle Language Selection Function ...................... 35
Moving Directly to a Scene/Song .............................36
Using the Disc Menu ................................................ 37
Using the Title Menu ................................................. 37
Playing Media Files using the USB HOST Feature._..38
4
5
Notes on Discs
DVD players and the discs are coded by region. These regional codes must match
Disc Recording Format
in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
This product does not support Secure (DRM) Media files.
(Your DVD player will only play DVDs that are labeled with identical region codes,)
CD-R Discs
Playable Discs
• Some CD-R discs may not be playable depending
on the disc recording device (CD-Recorder
or PC) and the condition of
the disc.
Disc Type
Mark (Logo)
Disc Size
Recorded
Signals
5"
DVD-AUDIO
DVD-VIDEO
Audio + Video
3 112"
AUDIO/VIDEO
Max. Playing Time
• Some CD-RW (Rewritable)
Approx. 80 min. (single-sided)
Approx 160 min. (double-sided
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not
3 112"
DivX
media, may not be playable.
be able to fully piay the disc.
74 min.
5"
DIG[TALAUDIO
minute CD-R disc.
Do not use CD-R discs over 7O0MB/8O minute as they may not be playback.
Approx 480 min. (double-sided
Audio
AUDIO-CD
• Use a 650MB/74
Approx. 240 min (single-sided)
20 min.
5"
74 min.
31/2"
20 min.
Audio + Video
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters
or less in length and contain no blank spaces or special characters
• Use discs recorded with a compressionldecompression
Do not use the following types of disc!
• Only files with the "mp3" and extensions
can be played.
• Only a consecutively
disc can be played. If there is a blank segment
written multisession
(. I = +).
data rate greater than 128Kbps.
in the Multisession
disc, the
disc can be played only up to the blank segment.
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
• If the disc is not closed, it will take longer to begin playback
and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded
(e.g., 32Kbps ~ 320Kbps),
in both low bit rate and high bit rate
the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
Copy Protection
CD-R JPEG Discs
• Many DVD discs are encoded with copy protection.
Because
player directly to your TV, not to a VCR. Connecting
picture from copy-protected
• This product incorporates
Use of this copyright
to a VCR results in a distorted
protection
technology
that is protected by methods claims of certain U.S.
property rights owned by Macrovision
protection technology
must be authorized
for home and other limited viewing uses only unless otherwise
Reverse engineering
or disassembly
This product is covered
Corporation
by Macrovision
authorized
and other rights owners.
Corporation,
by Macrovision
and is intended
Corporation.
by one or more of the following
U.S. patents:
5,705,762
5,987,417
6,043,912
6,222,983
6,272,096
6,377,524
6,377,531
6,385,587
6,578,163
6,389,570
6,594,208
6,408,408
6,631,110
6,466,532
6,658,588
6,473,736
6,674,697
6,477,501
6,674,957
6,480,829
6,687,455
6,556,520
6,697,307
6,556,521
6,707,985
6,556,522
6,721,243
6,721,493
6,728,474
6,741,535
6,744,713
6,744,972
6,765,853
6,765,853
6,771,890
6,771,891
6,775,465
6,795,637
6,810,201
or less in length and contain no blank spaces or special characters
(. / = +).
• Only a consecutively
disc can be played. If there is a blank segment
disc, the
written multisession
6,862,256
6,868,054
6,894,963
6,937,552
in the multisession
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
Picture CD, only the JPEG files in the picture folder can be played.
Picture CDs may take longer to start playing or may not play at all.
DVD + R/RW, CD-R/RW DivX Discs
5,561,649
6,788,630
• JPEG file names should be 8 characters
• Picture discs other than Kodak/Fuji
5,457,669
6,788,629
can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be piayed.
• When playing a Kodak/Fuji
is prohibited.
5,060,220
6,778,755
• Only files with the "jpg" extensions
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
DVD discs.
copyright
patents and other intellectual
of this, you should only connect your DVD
• Since this product only provides encoding formats authorized
by DivX Networks, Inc., a DivX file created by the user
might not play.
• Software
(Example
update for incompatible
formats is not supported.
: QPEL, GMC, resolution
higher than 800 x 600 pixels, etc.)
• Sections with a high frame rate might not be played while playing a DivX file.
This product is covered
US4,930,158
6
by the following
U.S. patents:
• For more information
about the formats authorized
by DivX Networks,
Inc., please visit "www.divxnetworks.net".
US4,930,160
7
Description
RearPanel
Front Panel
I
9@@
1. Disc Tray
6. Disc Change button
11. USB Port
2.
Function button
7. Power ((D/I)
12. Tuning Up & Skip (_)
3.
Stop (11) button
8. Standby indicator
4.
Play/Pause
9. Headphone
5.
Direct Play buttons
( !_, ) button
10.AUX
button
Jack
IN 1 Connector
button
Tuning Down & Skip (I,9.r_} button
13.Volume
Control
14. OpenlCIose
Connect a TV with c0mpoaeat video inputs to these jacks.
button
4,
9.
HDMI Output Jack
External Digital Optical Input Connector
Use this t0 €onnect external equipment capable of digital
output.
Display
Accessories
Remote Control
(AH59-01778F)
2.
8
LINEAR PCM indicator
9. REPEAT indicator
16, System Status Display
3. DTS indicator
i0. TUNED indicator
17: RADIO FREQUENCY indicator
4, TITLE indicator
tl, STEREO indicator
18. SPEAKER indicator
5
GROUP ind cator
!2 DOEBY Pill ndicator
19. D SC(!--5) ndicator
6. CHAPTER indicator
13. DVDAUD O indicator
7. TRACK indicator
14. MPEG indicator
Video Cable
(AH39-40001V)
FM Antenna
(AH42-00017A)
Audio
Cable
(AH39-00954A)
User's
Manual
(AH68-01957C)
9
Description
(Con't)
Remote Control
Insert Remote Batteries
1. DVD RECEIVER
POWER
0P_N_ _0SE
D MMER
@oOi°®O
©©@
@@@
©@@
-@
button
2.
TV button
3.
TV/VIDEO,
4.
POWER button
5.
Number(0~9)
6.
REMAIN button
7.
STEP button
8.
Tuning Preset/CD Skip buttons
9. VOLUME
1 Remove the battery cover in the direction of the arrow.
Insert two 1.5V AAA batteries, paying attention to the correct polarities
DISC SKiP button
(+ and -).
3 Replace the battery cover.
buttons
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity : (+) to (+) and (-) to (-).
• Use the correct type of batteriesBatteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose the batteries to heat or a flame.
button
10. MENU button
11. AUDIO button
12. I]D PL II EFFECT button
13. DD PL II MODE button
14.TUNER
MEMORY,
SD(Standard Definition)/HD(High Definition) button
15. ZOOM button
STOP
PLAY
®®@®
16. SLEEP button
17. SLOW, MOIST button
18. EZ VIEW button
19. _
Operation Range of the Remote Control
DVD button
TUNER button
The remote control can be used up to approximateiy
USB
1_
MENU
RETURN
USB, AUX button
20. OPEN/CLOSE
operated
at a horizontal
23 feet (7 meters) in a straight line. It can also be
angle of up to 30 ° from the remote control sensor.
button
21. DIMMER button
]u_
22. CANCEL button
!
i
23. REPEAT button
24. _
@
(_)(_
PLAY/PAUSE
STOP
button
button
SEARCH
25. TUNING/CH
buttons
button
26. MUTE button
TuNr_
_EMO_
SLOW
,
r_sl TO_ SOU_B_T
-_C2) C2).
27. RETURN button
28. Cursor/ENTER
29. SUBTITLE
SLEEF [ EZ v EW
,,CDCD, ;
button
button
30. EXIT button
...........
iii
31. DSP/EQ button
)
32. INFO button
33. SOUND EDIT button
34. DIGEST button
35. TEST TONE button
36. SLIDE MODE button
37. LOGO button
10
11
Connecting the Speakers
Before moving or installing the product,
be sure to turn off the power and disconnect
the power cord.
Rear Speaker(R)
Rear Speaker (L)
Center Speaker
,,,
2.5 to 3 times
the size
of the TV screen
/
\
Front Speaker (R)
Position of the Home Theater
Selecting the Listening Position
• Place it on a stan& cabinet shelf_or under the TV stand.
The listening position should be located about 2.5 to 3 times
the distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8 feet)
For 55" TVs 3.5~4m (11~13 feet)
Front Speaker (L)
Subwoofer
Front Speakers 00
• Place these speakers in front of your listening position,
facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at the
same height as your ear.
• Align the front face of the front speakers with the front face
of the center speaker or place them slightly in front of the
center speakers.
Center Speaker 0
Rear Speakers 00
Red
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers so they
face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear,
facing slightly downward.
* Unlike the front and center speakers, the rear speakers
are used to handle mainly sound effects and sound wili
not come from them all the time.
Subwoofer _)
• You can also install it directly over or under the TV.
• The position of the subwoofer is not so critical.
Place it anywhere you like.
Press and hold the terminal tab.
2
Insert the speaker cord.
3 Release your finger.
Black
\
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• When connecting
• It is best to instalt it at the same height as the front
speakers.
1
the speaker wires to the speakers,
• Keep the subwoofer speaker
substances
into the duct (hole) of the subwoofer
• Do not hang the subwoofer
make sure that the polarity (+/-) is correct.
out of reach of children so as to prevent children from inserting their hands or alien
speaker.
on the wall through the duct (hole).
• If you place a speaker near your TV set, screen color may be distorted
by the speaker.
12
because of the magnetic field generated
If this occurs, place the speaker away from your TV set.
13
Connecting
theOptional
Wireless
Receiving
Amplifier
To connect the rear speakers
wirelessly, you have to purchase
the wireless receiving module
and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
Resettingthe Wireless Receiving Module
Reset the system if a communication
Front Speaker (R)
Front Speaker (L)
failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not
light up and the "REAR CHK" message blinks on the main unit's displaj4
Reset the system while the main unit and the wireless receiver
module (SWA-3000)
are in Power Standby mode.
Center Speaker
1 With the main unit turned off, press and hold the remote
control's REMAIN button for 5 seconds.
• The STANDBY LED on the front panel of the wireless receiver module
blinks.
2 With the wireless receiver module turned on, use a ball point
pen or a toothpick to press the RE8ET button on the back of
the unit.
• The STANDBY LED on the front panel of the wireless receiver module
blinks 2 Times.
Subwoofer
3 Turn on the main unit.
Rear Speaker (L)
• The LINK LED of the wireless receiver module is lit and the Reset is
Rear Speaker(R)
completed.
• If Power Standby mode continues, repeat Steps 1 to 3 above.
WIRELESS RECEIVER MODULE
!i!ii¸!¸¸¸!:/))i
)i )i )i )i )_i ¸¸¸¸¸¸¸¸)¸¸¸¸
)!i¸¸¸¸¸¸¸¸¸¸i!!;
i i i¸ iii!iii)i!i(ii¸ii)? ? _)!ii
i!i(i¸!);i; iiiiii))i!; !; !;i;;
1
Connect the Front, Center and Subwoofer speakers to the main unit,
referring to page 13.
2 With the main unit turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the back of the main unit.
•
Hold the TX card so that the slanted side faces leftward and insert the
card into the port.
• The TX card enables communication between the main unit and the wireless receiver.
• When the wireless receiving moduIe setting is complete, no audio signal is output from the Rear Speaker Output
Connector on the back of the main unit.
• The wireless receiving antenna is built into the wireless receiver
moisture.
• For optimal listening
performance,
module. Keep the unit away from water and
make sure that the area around the wireless receiver module location is clear of
any obstructions.
Slanted side face left
3 Connect the left and right rear speakers to the wireless receiving
module.
• Sound will be heard from the wireIess
rear speakers
in DVD 5.1-CH or Dolby Pro Logic I! mode on(y.
• In 2-CH mode, no sound will be heard from the wire(ess rear speakers.
TX card
4 Plug the power cord of the wireless receiving module in the wall outlet
and switch the power switch 'ON'.
• P(ace the wireless receiver modu(e at the rear of the listening position. If the wire(ess receiver
to the main unit, some sound interruption
• If you use a device such as a microwave
• Do not insert a card other than the TX card dedicated
for the product.
The product might be damaged or the card may not be removed easily.
uses the same frequency
• The transmission
(2.4GHz)
oven, wireless LAN Card, Bluetooth equipment,
near the system, some sound interruption
• Do not insert the TX card upside down or in the reverse direction.
environment.
• Insert the TX card when the main unit is turned off.Inserting
the system may not operate at all, because the radio wave cannot penetrate metal.
the card
or any other device that
may be heard due to interference.
distance of a radio wave is about 33 feet, but may vary depending
If a stee(-concrete
module is too close
may be heard due to interference.
on your operating
wa(I or metallic wall is between the main unit and the wireless receiver modu(e,
when it is turned on may cause a problem.
• if the TX Card is inserted in the main unit, the rear speakers
output sounds.
14
don't
15
Connecting the Video Out to your TV
Choose one of the three methods for connecting
to a T_Z
HDMI Function
Resolution Selection
This function allows the user to select the screen resolution
for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High
Definition)button on the remote control.
• Resolutionsavailablefor the HDMtoutputare 480p,720Pand 1080i.
• SD(StandardDefinition)resolutionis 480p andHD(HighDefinition)resolutionis 720p/1080i.
ii
COMPONENTo_
Example: If the TV supports resolution up to 480p:
Press the SD/HD button.
• A480p videosignalis outputthroughthe HDMIoutput.
What is HDMI (High Definition
Multimedia Interface)?
TNs device transmits a DVD
video signal digitally without
the process of converting to
analog. Youwill get sharper
digital pictures when using
an HDMI connection.
(supplied)
• If the TVdoesnot supportthe configuredresolution,you will not be ableto see the pictureproperly.
• The default setting of the HDMI output is 480p.
• When a HDMI TV is connected, composite and component video signals are not
output.
• See your TV owner's
manual for more information
on how to select the TV's Video
Input source.
Using Anynet+(HDMl-CEC)
TV
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be lsed
I
by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that suppol Anynet+. )
I
1 Connect the main unit of the Home Theater to a Samsung TV with
an HDMI cable. (See page 16)
2 Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
• You can operate the Home Theater by using the TV remote control.
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the main unit to the HDMI IN jack
on your TV.
If your television
the Component
Connectors
is equipped
with Component
Video inputs, connect a component
Video Output (Pr, Pb and Y) Connectors
video cable(not
lAva,able
TVbuttons:
Set the Anynet+(HDMI-CEC)
supplied) from
on the back of the main unit to the Component
on your TV.
• This product operates in Progressive scan mode(480i Only ) for Component Output.
• After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
• If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate
button)
to <On> on your TV.
• <Receiver: On>: Youcan listento audiothroughthe TV.
• <Receiver: Off> :Youcan listento audiothroughthe HomeTheater.
Video Input
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV.
", • and'q, buttons,
With Anynet+
I
You can operate this unit,
I
power on your TV, or watch
a movie by pressing the Play I
button on your Samsung TV's
remote centre.
J
Select <THEATER to connector> and set the option of each items below.
• <THEATER Menu> : You can access the Home Theater menu.
• <THEATER Operation> : The Home Theater disc playback information will be displayed.
• <Receiver : On> : You can listen to audio through the Home Theater.
• <Receiver : Off> : You can listen to audio through the TV.
• The Theater function is available only when you listen to the audio through
the Home Theater with the digital optical cable connected.
the Home Theater using the TV's remote control. (This is only available with SAMSUNG TVs
that support Anynet+(HDMI-CEC).)
• Please check the _-Tynet + logo (If your TV has an (_ynet+
16
logo, then it supports Anynet+ function.)
17
ConnectingAudio from ExternalComponents
AUX1 : Front Panel (iPod only)
AUX1 : Front Panel
AUX2 : Rear Panel
OPTICAL : Rear Panel
/A
_,
,_,_,
Y
z
Audio Cable I
I
4/,°:',:°:t,':'o
(not supplied)
If the external analog
component has only one
AudioAudio
Out, connect
Cable either
left or right.
AUDIO
AUX1 • Connecting an External Analog Component/iPod MP3
You can listen to the audio from an External Analog Component/iPod
MP3 player through the main unit.
AUX2 • Connecting
Analog signal components
OUT
an External Analog Component
such as a VCR.
1 Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external analog component/
iPod MP3.
1 Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
2 Press the AUX button on the remote control to select <AUXI> input.
2 Press the AUX button on the remote control to select <AUX2> input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows • DVD/CD -_ DIGITAL IN -* AUX 1 -_ AUX 2 -_ USB -_ FM,
• When the unit is powered on and you connect an iPod MP3 player, the unit wilI charge your iPod's battery.
• Be sure to match connector colors.
• You can also use the FUNCTION button on the main unit.
The mode switches as foltows " DVD/CD -* DIGITAL IN -* AUX 1 -* AUX 2 -* USB -* FM.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to
this product.
OPTICAL • Connecting
Digital signal components
an External Digital Component
such as a Set-Top Box.
1 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2 Press the AUX button on the remote control to select <DIGITAL IN>.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows • DVD/CD -_ DIGITAL IN -_ AUX 1 -* AUX 2 -* USB -* FM.
18
19
Connecting the FM Antenna
Before Reading the User's Manual
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
RADIO ANT
FM Antenna (supplied)
FM 75 Q
Term
Definition
DVD
with DVD or
been recorded
This
available
with a data CD
MP3
This
involves
a function
available
with CD-R/-RW
discs.
JPEG
This
involves
a function
available
with CD-R/-RW
discs.
This
involves
a function
available
with MPEG4
This involves
each function
to a wall or other rigid surface.
tips or instructions
operate.
marked with "DVD ( _,
DVD type is mentioned,
discs.
or CD-RW)
discs that have been recorded
Where a particular
• If a DVD-R/-RW
R/RW CD-R
This involves a case where a function
operate or settings may be cancelled.
• In this manual, the instructions
and DVD-R/-RW
or CD-RW).
(DVD_
NOTE
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it
a function
(CD-R
CAUTION
Connect the FM antenna supplied to the FM 75_-2COAXIAL Jack.
involves
and
CD
DivX
1
This involves a function available
DVD-R/DVD-RW
discs that have
finalized
in Video Mode.
does not
on the page that help
)" are applicable
to DVD-VIDEO,
DVD-AUDIO
in Video Mode and then finalized.
it is indicated
separately.
disc has not been recorded properly in DVD Video format, it will not be playable.
• This unit does not receive AM broadcasts.
The cooling fan supplies cool air to the unit to prevent overheating.
Please
observe
the
following
cautions
for your
safety.
• Make sure the unit is weIFventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (tf the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.)
20
21
Before Using Your Home Theater
Disc Playback
1 Press the OPEN/CLOSE
To OperateyourSamsungTVandthe HomeTheaterwiththeHT-XSO's
RemoteControl
The DVD Home Theater's remote can be used to control Samsung
1
2
TVs.
button to open the disc tray.
Load a disc.
• Place a discgentlyintothe traywiththe disc'slabel facingup.
3 Press the DISC 8KIP button.
Plug the main unit's power cord into the AC power supply.
• Rotatethe carousettrayso you can loadthe third,fourth,andfifthdiscs•
ii
4
Close the compartment
by pressing the OPEN/CLOSE
button again.
• Playbackstartsautomatically.
POWER
ii_ii!ii,i
ii!iiiil)i_iiiiiii_,
_
2 Press the TV button to set the remote to TV mode.
3 Press the POWER button to turn on your Samsung TV
with this remote.
4 Press the TV/VlDEO button to select VIDEO mode on your TV.
VIDEO
To stop playback, press the 8TOP button during playback.
• If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( I_11) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE ( I_11 ) button is pressed, ptayback starts from
the beginning.
To temporarily
pause playback, press the PLAY/PAUSE ( _ll ) button during playback.
• To resume playback, press the PLAY/PAUSE ( I_11) button again.
• Avoid getting fingerprints
6 Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
on the writing surface of a disc, it may cause the disc to not read properly,
• Depending on the content of the disc, the initial screen may appear different.
• Any piracy could not be runnable in the player. Otherwise, it violates the CSS (Content Scrambling System : a copy
protection system) recommendations.
Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD/CD playback.
Selecting a Disc in the Disc changer
•
ii
:_i_iiiiiiii_i!i!iii!i_
_!_ii!ili_!!i,_!!ili_iii_
_!iii!ii!iiiiiii!!ii_i
To select a specific disc, press the corresponding the DIRECT PLAY (1, 2, 3, 4, 5)
buttons on the front panel or the DISC 8KIP button on the remote control, until
the required disc indicator flashes.
• If thediscselected
isnottoaded, thenextdiscis played automatically•
,i 4
22
ill i_ i
0
23
MP3/WMA-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3/WMA
JPEG File Playback
format can be played.
Images captured with a digital camera or camcorder,
or JPEG files on a PC can be stored on a CD and then played back
with this Home Theater.
i i.............................................................
0PE _£L0S_
®
i;
Slide Mode
1 Place the MP3/WMA disc on the disc tray.
• The MP3/WMA menu screen will appear and ptayback will start.
• The appearance of the menu depends on the MP3/WMA disc.
i
.......... i ii
• WMA-DRM files cannot be played.
2 In Stop mode, use the Cursor •, •,
i
• Use the Cursor •,
•
2
4, • button to select the album, and
then press the ENTER button.
1 Place the JPEG disc on the disc tray.
• Playbackstartsautomatically.Eachimageis displayedfor 5 secondsandthenthe next
imageis displayed.
ii ¸ii¸¸¸¸¸:¸£¸!
!i!i!ii _
Press the SLIDE MODE button.
• Eachtime the buttonis pressed,the imagemakesthe transitionasfollows:
i!!!!!!il
button to select the track.
3 To change the album, use the Cursor •, •,
•,
• button to select another
ii
Press the I<1<1IH_I button to skip to the next slide.
album in Stop mode, and then press the ENTER button.
i i
• Each time the button is pressed, the slide moves backward or forward.
• To select another album and track, repeat Steps 2 and 3 above•
Digest Function
4 Press the 8TOP (,,) button to stop playback.
You can wew 9 JPEG images on the TV screen at once.
i iil
i iil
• Depending
i
• Table of contents of a MP3-CD varies depending
recorded on the disc.
on the recording mode, some MP3/WMA-CDs
may not play.
on the MP3/WMA
track format
1 Press the DIGEST button during playback.
• JPEGfileswiIIbe shownin9 windows.
2
!;iiii
SORTNG
_
_
_
Press the Cursor A, •,
•,
• button to select the desired image and
then press the ENTER button.
• The selectedimageis playedfor 5 secondsbeforemovingto the next image.
_
_SfC_RfNAVI
_" To view the previous or next 9 images, press the _
button.
Rotate/Flip Function
_" To play a file icon in the screen,
• Press the Cursor •, •,
_
4, • button when it is in Stop mode and select a desired icon from the top part of the menu.
Press the Cursor A, •,
Music File Icon : To ptay music files only, select the _
• button during playback.
Icon.
Image FiIe Icon : To view image files only, select the _
Icon.
Movie FiIe Icon : To view movie files only, select the _
Icon.
All File Icon : To view movie flies oniy, select the _
•,
• button:Flip Vertically
,
Icon.
÷¢@@®®÷¢
• button:Rotate90°
Counterclockwise
I_ button: Rotate 90°
Clockwise
Original Image
• button: Flip Horizontally
24
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
• Ifa JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is
automatically converted to 480p mode.
25
DivX Playback
The functions on this page apply to DivX disc playback.
I
Skip Forward/Back
During playback, press the I_1<, _
Subtitle Display
Press the SUBTITLE button.
button.
• Goes to the next file whenever you press the I_
• Each time you press the button, your selection will toggle between <SUBTITLE (l/N, 2/N ...)>
button, if there are over 2 flies in the disc.
• Goes to the previous file whenever you press the I_
and <SUBTITLE OFF>.
button, if there are over 2 files in the disc.
• If the disc has only one subtitle file, it will be played automatically.
• See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.
J Fast Playback
To play back the disc at a faster speed, press the _
playback.
or _
I
button during
If the disc has more than one subtitle file
If the disc has more than one subtitle file, the default subtitle may not match the
movie and you will have to select your subtitle language as follows:
• Eachtime you presseitherbutton,the playbackspeedwill changeas follows:
2x -_ 4x -_ 8x-_ 32x -_ Normal.
1 In Stop mode, press the Cursor A, • button, select the desired subtitle ( _
)
from the TV screen, and then press the ENTER button.
Minute Skip function
2 When you select the desired DivX file from the TV screen, the movie will be
During playback, press the Cursor _i, • button.
played normally.
• Playback skips 5 minutes fop_vardwhenever you press the Cursor • button.
• Playback skips 5 minutes back whenever you press the Cursor< button.
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Intemet in real-time.
! Zoom Function
1
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quafity
video and audio.
Press the ZOOM button.
• Each time you press the button, your selection will toggte between <ZOOM X2> and
<ZOOM OFF>.
2
Press the Cursor A •,
1. Supported
Formats
This product only supports the following media formats. If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
Supported Video Formats
,< • button to move to the area you want to enlarge.
t Supported
Format
Versions
• A DivX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX and may not be
playable in this unit.
AVI
DivX3.11~DivX5.1,
Supported Audio Formats
Format
MP3
WMA
Bit Rate
80~384kbps
56~128kbps
Sampling
Frequency
44.1khz
I Audio Display
• DivX files, including
TV screen resolutions
• If there are multiple audio tracks on a disc, you can toggte between them.
,
Caption
• To use the caption function,
within the same folder.
Example.
up to 800x600
pixels (!6:9).
is higher than 48khz or 320kbps, you may experience
shaking on
Root
with video extraction and editing in order to use this feature properly.
save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
Samsung_007CDl.avi
Samsung_007CD1
26
is 640x480 pixels (4:3), this product supports
Function
• You must have some experience
is displayed when there is one supported language in the disc.
DT8
1.5Mbps
44.1khz
higher than 800 will not be supported.
• When you play a disc whose sampling frequency
the screen during playback.
_fn
• Each time you press the button, your seIection will toggte between <AUDIO (l/N, 2/N ...)> and _.
AC3
128~384kbps
44.1/48khz
audio and video files, created in the DTS format can only support up to 6Mbps.
• Aspect Ratio: Although default DivX resolution
Press the AUDIO button.
• _
WMV
Vl/V2/V3/V7
XviD
• Up to 60 alphanumeric
the file name.
characters
.smi
or 30 East Asian characters
(2 byte characters
such as Korean and Chinese) for
27
Using the Playback Function
Displaying Disc Information
You can view disc playback
information
_
_
Checking the Remaining Time
on the TV screen.
Press the REMAIN button.
• For checkingthe total andremainingtimeof a titleor chapterbeingplayed.
Press the INFO button.
Each time the Remain button is pressed
• Eachtime the buttonis pressed,the displaychangesas follows:
..............
i (ii_i:iiii:
_i?ii'i'i'i'i:_i
j_i_ii,_i:i_,
.......
0
The information
Display disappears
from the screen
O
Fast Playback
The information
Display disappears
from the screen
s^Ms
everyone's
Press the ,_r_l, _
button.
inv_ted_
!!
...... _•_/
®
L!iiii:!:
¸_
• Eachtimethe buttonis pressedduringplayback,the playbackspeedchangesas follows:
®
The information
DisplaY disaPpears
from the screen
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
• Depending on the disc, the disc information display may appear different.
• Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC•
Slow Playback
_
appears on the TV screen!
If this symbol appears on the TV screen when pressing a button, that operation is not
possibte with the disc currently being ptayed.
D\,,/_
DVD-AUDIOdisplay
CD display
28
TITLE display
DVDdisplay
_8,V
ELAPSEDTIMEdisplay
_'_ LR
STEREO
(L/R)display
_G_
DOLBY
DIGITAL
display
CHAPTERdisplay
_
REPEAT
PLAYBACK
display
TRACK(FILE)display
i_
AUDIOLANGUAGE
display
GROUP display
_
SUBTITLEdisplay
Press the 8LOW button.
&_ow
• Eachtimethe buttonis pressedduringplayback,the playbackspeedchangesas follows:
• No sound is heard during slow playback.
• Reverse slow playback does not work with DivX.
ANGLEdisplay
29
Using the Playback Function (Con't)
Skipping Scenes/Songs
Press the I<<,
Repeat Playback
_
button.
• Eachtime the buttonis pressedduringplayback,the previousor next chapter,trackor
directory(file)will be played.
• Youcannotskip chaptersconsecutively.
Repeat playback
l?i'_.;_,i:i
_ l 0 _
allows you to repeatedly
.i_:._._,:_
play a chapter, title, track (song), or directory (MP3 file).
Press the REPEAT button.
• Eachtimethe buttonis pressedduringplayback,the repeatplaybackmode
changesas follows:
_i!::_i!i!::,i
_:ii;i:i,ii,:
_
.il.¸¸ _
•
,'
i¸¸ ...............
;
•
.....
!if!?
,
I<<
CHAPTER : Repeatedly plays the selected chapter.
TRACK : Repeatedly plays the selected track.
TITLE : Repeatedly plays the selected title.
DIR : Repeatedly plays atl tracks in the selected folder.
GROUP : Repeatedly plays the selected group.
DISC : Repeatedly plays the entire disc.
RANDOM : Plays tracks in random order.
(A track that has already been played may be playedagain.)
OFF : Cancels Repeat Playback.
To Select a Repeat PlaybackMode in the Disc Information Screen
1
Press the INFO button twice.
2
Press the Cursor • button to move to REPEAT PLAYBACK (_#)
3 Press the Cursor •
display.
button to select the desired Repeat Playback mode.
• Toselectanotheralbumandtrack,repeatSteps2 and3 above•
4
Press the ENTER button.
_)TRACK
d;_oBc
I
• For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information
display screen.
30
31
A-B Repeat Playback
You can repeatedly
Angle Function
play back a designated
section of a DVD.
This function allows you to view the same scene in different angles.
1
Press the INFO button twice.
1
Press the INFO button.
2
Press the Cursor • button to move to the REPEAT PLAYBACK ((_)) display.
2
Press the Cursor • button to move to ANGLE ( _N ) display.
3
Press the Cursor A
3 Press the Cursor A
•
button to select <A-> and then press the ENTER button
at the beginning of the desired segment.
• Whenthe ENTERbuttonispressed,the selectedpositionwill be storedin memory•
4
•
button or numeric buttons to select the desired angle.
• Eachtimethe buttonis pressed,the angtechangesasfollows:
Press the ENTER button at the end of the desired segment.
• The specifiedsegmentwill be playedrepeatedly.
A TO B REPEAT ON
• The Angle function works only with discs on which multiple angles have been recorded.
_" To return to normal playback, press the Cursor A, • button to select
(_# OFF.
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
Zoom (Screen Enlarge) Function
This function allows you to enlarge a particular
area of the displayed image.
1
Press the ZOOM button.
2
Press the Cursor A, •,
•,
• button to move to the area you want to enlarge.
3 Press the ENTER button.
Step Function
• Each time the button is pressed, the zoom levet changes as follows:
Press the STEP button.
• The picture moves forward one frame each time the button is pressed during playback.
• No sound is heard during step motion playback.
32
-4'
-4*
-4*
• When a DivX disc is being played, the screen is enlarged up to twice the normal size.
33
Using the Playback Function (Con't)
EZ VIEW Function
Audio Language Selection Function
Press the EZ VIEW button.
• Eachtime the buttonispressed,the zoomfunctionwill switchbetweenOnandOff.
i_
:
_ii::iiiili
ii iiiiii
EZ VIEW
• Whena movieis playedin Widescreenformat,btackbars atthe top andbottomof the TV
screencan be removedby pressingthe EZViEW button•
',!i!:!!_
.... _ii!ii!!!!
;_
1
Press the INFO button twice.
2 Press
the Cursor
iiii,iii:i i!i ii!:i!ili:ii!iii
i !iii!!iiii'i'
i!i i!!i!
A, •
button or numeric buttons to select the desired audio
language.
.....
ii _iil
• Dependingon the numberof languageson a DVD disc,a differentaudiolanguage(ENGLISH,
SPANISH,FRENCH,etc.) is selectedeachtime the buttonis pressed.
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to
vertical ratio.
• This feature is not supported for DivX discs.
• During the EZ View operation, the scenes on the screen are not full to the brim of the TV
screen, but some of their left and right sides may be cut slightly.
Subtitle Language Selection Function
1 Press the INFO button twice.
2 Press the Cursor • button to move to SUBTITLE (_]) display.
Bonus Group
Some DVD-Audio
3 Press the Cursor • button or numeric buttons to select the desired subtitle.
discs have an extra 'oonus' group that requires a 4-digit key number
to access.
See the disc packaging
for details and the-key number.
input screen appears automatically.
_•
If youplay
eject athe
disc, switch the
power
or unplug
the player,
willkey
need
to re-enter
When you
DVD-Audio
disc
thatoff,
has
a bonus
group,you
the
number
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on
the remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
Navigating Pages
During playback, press the v,A
button on the remote control.
• Youcan selectthe desiredimagefrom a DVD-Audiodisccontainingstill images•
• With somediscs,you may not be able to selectimages.
34
35
Using the Playback Function (Con't)
Moving Directly to a Scene/Song
_
Using the Disc Menu
You can use the menus for the audio language,
MENU
ii!i
1
i'ii2
;
Press the INFO button.
1
2
Press the Cursor ,&, • button or numeric buttons to select the
subtitle language,
profile, etc. DVD menu contents differ from disc to disc.
In Stop mode, press the MENU button.
Press the Cursor •,
•
button to move to the <DISC MENU> and then
press the ENTER button.
• Whenyou selectDiscMenuand itis not supportedby the disc,the "This menuis not
supported"messageappearson the screen.
desired title/track ( _ ) and then press the ENTER button.
3 Press the Cursor <, • button to move to the Chapter ( _AVJ'A
) display.
3 Press the Cursor •,
•,
<,
• button to select the desired item.
E×iT
4 Press the Cursor ,&, • button or numeric buttons to select the
desired chapter and then press the ENTER button.
4
_!::,!_!_,
¸ i:_"_i_i!!,!!i:,
@
Press the ENTER button.
ii!_ii,i!ii_iiiii,ii:ii
_ ,'_:_:,_ii_'_
_ _ _i!i!i,i_?_
iili!i
_- Press the EXIT button to exit the setup screen.
6 Press the Cursor <, • button to move to time ( O ) display.
6 Press the numeric buttons to select the desired time and then press
the ENTER button.
• The disc menu display may be different depending on the disc•
Using the Title Menu
Press the numeric buttons.
• The seIected file wilI be played•
For D VDs containing
• When playing an MP3 or JPEG disc, you cannot use the Cursor •,
may vary.
To move a folder, press the STOP (11) and then press the Cursor •
• button to move to a folder•
•
button.
multiple titles, you can view the title of each movie. Depending
1
2
on the disc, the availability
of this feature
In Stop mode, press the MENU button.
Press the Cursor •, • button to move to the <Title Menu>.
3 Press the ENTER button.
• Thetitlemenuappears.
Press the EXIT button to exit the setup screen.
• You can press the _14 _
button on the remote control to move directly to the desired
title, chapter, or track•
• Depending on the disc, you may not be able to move to the selected title or time.
36
• The Title menu display may be different depending on the disc.
37
PlayingMediaFiles usingthe USBHOSTFeature
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video with 5.1 channel home theater sound by connecting
the storage device to the USB port of the home theater.
Connect the USB device to the USB port on the front of the unit.
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc in
Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• camerasthatoperateas a removablediscin Windows(2000or later)withoutadditionaldriverinstallation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USBI.1.
• Youmay experiencea differencein playbackqualitywhen you connecta USB1.1device•
• For a USBHDD,makesureto connectan auxiliarypowercordto the USBHDDfor properoperation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Dependingon the manufacturer,the USBcardreadermay not be supported.
• If you installmultiplememorydevicesinto a multicard reader,you may experienceproblems•
6. If yOU use a USB extension cable, the USB device might not be recognized.
2
Press the FUNCTION button on the main unit or the U8B button on the
Supported Formats
remote control to select the USB mode.
• <USB>appearson the displayscreenandthendisappears.
• The USBMENUscreenappearson the TVscreenandthe savedfile is played.
3
To stop playback, press the 8TOP (I)
JPG
button.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable•
(1) Press the STOP (I) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
-
640x480
-
MP3
MP3
80~384kbps
-
-
44.1kHz
WMA
.WMA
56~128kbps
V8
-
44.1kHz
WMV
.WMV
4Mbps
V1,V2,V3,V7
720x480
44.1KHz~48KHz
DivX
.AVI,.ASF
4Mbps
DivX3.11~DivX5.1,XviD
800x600
44.1KHz~48KHz
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16132)file
system is supported.)
Skip Forward/Back
During playback, press the _
• Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.
I_-I button.
• When there is more than one file and you press the I_,-I button, the next file is selected•
• When there is more than one fite and you press the i_1_1button, the previous file is selected•
@ ...................
@
: iiii iiii < i iiliiii
iiiiiiiiii:,
i i iii:
_ii ,,i_ _ij
JPG .JPEG
_
• The USB HOST function is not supported if a product that transfers media files by its manufacturerspecific program is connected.
• Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices. For information on the
supported devices, see page 62.
Fast Playback
0
38
iiii To play back the
disc at a faster speed, press the _1
_
button during playback.
• Eachtime you presseitherbutton,the playbackspeedwill changeas follows:
2x -_ 4x -_ 8x-_ 32x -_ Normal.
39
Settings
Setting the Language
OSD (On-Screen
Display) language
1
Setting TV Screen type
is set to English by default.
Depending
In Stop mode, press the MENU button.
on your TV type (Wide Screen
1
or conventional
4:3), you can select the TV's aspect ratio.
In Stop mode, press the MENU button.
2 Press the Cursor • button to move to <Setup> and then press the ENTERbutton.
2 Press the Cursor • button to move to <Setup> and then press the ENTER button.
3 Select <LANGUAGE> and then press the ENTER button.
3 Press the Cursor • button to move to <TV DISPLAY> and then press
4
Press the Cursor A • button to select <OSD LANGUAGE> and then press
the ENTER button.
4 Press the Cursor A • button to select the desired item and then press
(5 Press the Cursor A • button to select the desired language and then press
the ENTER button.
• Oncethesetup
is complete,
the ENTER button.
the ENTER button.
• oncethesetup
is complete,
youwillbetakentothe previous screen.
theOSDwillbe English if English hasbeenselected
as language.
Press the RETURN button to return to the previous level.
_" Press the RETURN button to return to the previous level.
_" Press the EXIT button to exit the setup screen.
_" Press the EXIT button to exit the setup screen.
•OSD LANGUAGE : Selecting the OSD Language
•AUDIO : Selecting the Audio Language (recorded on the disc)
• SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
• DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
•_ If the language you selected is not recorded on the disc, the menu language will not change even
if you set it to your desired language.
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 169. This ratio is
called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either <4:3LB> or <4:3PS> option according to personal preference. Select <WIDE/HDTV> if you have
a widescreen TV.
4:3LB (4:3 Letterbox)
Select this to play a 16:9 picture in the letter box mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
•OTHER : To select another language, select <OTHER> and enter the language code of your country
(See page 61 for language codes) AUDIO, SUBTITLE and DISC MENU language can be
selected.
4:3PS (4:3 Pan&Scan)
Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.
• You can see the central portion of the screen only (with the sides of the 16:9 picture cut off).
WlDE/HDTV
Select this to view a 16:9 picture in the fuU-screen mode on your widescreen TV
• You can enjoy the widescreen aspect.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on the software,
the type of TV, and the TV aspect ratio setting.
• In HDM( operation, the screen is automatically converted to Wide mode
40
41
Settings
(Con't)
Setting Parental Controls (Rating Level)
Use this to restrict playback
of adult or violent DVDs you do not want children to view.
1 In Stop mode, press the MENU button.
2
While watching a DVD or JPEG CD, you can set the image you like as background
1 During playback, press the PLAY/PAUSE
2
button when an image you like
Press the LOGO button.
• <coPY LOGO DATA>will be displayedon the TV screen.
Press the Cursor A • button to select the desired rating level and then press
the ENTER button.
wallpape_
appears.
Press the Cursor • button to move to <Setup> and then press the ENTERbutton.
3 Pressthe Cursor• buttonto moveto <PARENTAL>and thenpress theENTERbutton.
4
Setting the Wallpaper
3 The power will turn off and then back on.
• The selectedwallpaperwill be displayed.
• Youcan selectupto 3 wallpapersettings.
• If you have selected Level 6, you cannot view DVDs with Levet 7 or higher.
• The higher the levet, the closer the content is to violent or adult material.
6 Enter the password and then press the ENTER button.
• This function wilI not work when the HDMI output is 720p or 1080i.
• The password is set to "7890" by default.
• Once the setup is complete, you will be taken to the previous screen.
_" Press the RETURN button to return to the previous level.
To Select One of the 3 Wallpaper Settings you've made
_" Press the EXIT button to exit the setup screen.
'1 In Stop mode, press the MENU button.
• This function works only if a DVD disc contains the rating level information.
2
Press the Cursor • button to move to <Setup> and then press the ENTER button.
3 Press the Cursor • button to move to <LOGO> and then press
the ENTER button.
Setting the Password
You can set the password
4 Press the Cursor A • button to select the desired <USER>, and then press
for the Parental (rating level) setting.
the ENTER button.
• Thissetects
oneof the3 wallpaper
1 In Stop mode, press the MENU button.
2
screens
Press the EXIT button to exit the setup screen.
Press the Cursor • button to move to <Setup> and then press the ENTERbutton.
3 Press the Cursor • button to move to <PASSWORD> and then press
the ENTER button.
• ORIGINAL : Select this to set the Samsung Logo image as your wallpaper.
• USER : Select this to set the desired image as your wallpaper.
4 Press the ENTER button.
Enter the password and then press the ENTER button.
• Enter the old password, a new password, and confirm new password.
Press the RETURN button to return to the previous level.
_" Press the EXIT button to exit the setup screen.
• The setting is complete.
• The password is set to "7890" by default.
• While the player is in No Disc mode, hold the main unit's STOP ( • )button for longer than 5 seconds. <IN ITIAL> appears on
the display and atisettings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
42
43
Settings
(Con't)
DVD Playback Mode
Some DVD-Audio
Setting the Delay Time
discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video
If the speakers cannot be placed at equal distances
portion of the DVD-Audio disc, set the unit to DVD-Video
mode.
from the listening
position, you can adjust the delay time of the audio
signals from the center and rear speakers.
1 Press the MENU button while the disc tray is open.
2 Press the Cursor • button to move to <Setup> and then press the ENTERbutton.
I
2
3 Pressthe Cursor• buttonto moveto <DVDTYPE>and then pressthe ENTERbutton.
3 Press the Cursor • button to move to <DELAY TIME> and then press
4
In Stop mode, press the MENU button.
Press the Cursor • button to move to <Audio>and then press the ENTER button.
the ENTER button.
Press the Cursor ,&, • button to move to <DVD VIDEO> and then press the
ENTER button.
4
Press the Cursor A •,
• button to move to the desired speaker and
then press the ENTER button.
• Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
6 Press the Cursor •,
When Selecting
•,
DVD Play Mode:
• button to set the Delay time.
• Youcansetthe delay timeforC between
00and05mSECandforSLandSRbetween00and
15mSEC.
• DVD VIDEO set to play the DVD video contents contained on a DVD audio disc.
• DVD AUDIO set to play the default DVD audio.
Press the RETURN button to return to the previous level.
• DVD Play mode is set to DVD Audio as factory default setting.
• Powering off the main unit wilt automatically switch to the DVD Audio mode.
_" Press the EXIT button to exit the setup screen.
DivX (R) registration
Please use the Registration
code to register this player with the DivX (R) video on demand format.
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by
adding a delay effect to the sound of the Center and Surround Speakers.
To learn more, go to www.divx.com/vod.
Setting the Speaker Mode
Signal outputs
configuration
and frequency
and whether
responses
certain speakers
from the speakers
IdeatCENTER
will automatically
be adjusted
according
to your
speaker
are used or not.
1 In Stop mode, press the MENU button.
2 Press the Cursor • button to move to <Audio> and then press the ENTER button.
I
Press the Cursor A •,
•,
(
press the ENTER button.
• For L and R, the mode is set to SMALL.
It _s desirable
between
DfandDe
De ay T me
gc
0inch
0 ms
136Jnches272inches40.8inches
ms
2 ms
3 ms
45feet
56feet
4 ms
5 ms
Setting REAR (SURROUND) SPEAKERS
If the distance of Df isequat to the distance of Ds in the figure, set the mode
as 0ms. Otherwise, change the setting according to the table.
SL
• button to move to the desired speaker and then
• For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows :
SMALL -* NONE.
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df inthe figure,
set the mode as 0ms. Otherwise, change the setting according to the table.
Distance
/
3 In the <SPEAKER SETUP>, press the ENTER button again.
4
SPEAKER
SR
Ideal
SURROUND
SPEAKER
placement
DistansebetweenDfandDc
De ay Tree
0inch
0ms
40.8inches
3ms
67feet
6ms
100feet
134feet
167feet
9ms
12ms
15ms
to place all speakers within this c_rc_e.
Df: The distance _rom FRONT SPEAKER
Dc: The distance =rom CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
• SMALL : Select this when using the speakers.
• NONE :SeIect this when no speakers are connected.
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary
(see page 51).
• With [I]PL II (Doiby Pro Logic II), the delay time may be different for each mode.
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• The Center channel is onty adjustable on 5.1 channel discs.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
44
45
Settings
(Con't)
Setting the Test Tone
Setting the Audio
Use the Test Tone feature to check the speaker
connections.
You can adjust the balance and leve! for each speaker.
1 In Stop mode, press the MENU button.
1 In Stop mode, press the MENU button.
2
2
Press the Cursor • button to move to <Audio> and then press the ENTER button.
3 Press the Cursor•
button to move to <TEST TONE> and then press the
Press the Cursor • button to move to <Audio> and then press the ENTER button.
3 Press the Cursor • button to move to <80UND EDIT> and then press
the ENTER button.
ENTER button.
• The test tone wilI be sent to L -_ C -* R -, SR -_ SL -* SW in order.
If the ENTER button is pressed again at this time, the test tone wili stop.
4 Press the Cursor A • button to select and adjust the desired item.
Press the Cursor •,
• button to adjust the settings.
_ Press the RETURN button to return to the previous level.
_ Press the RETURN button to return to the previous level.
_" Press the EXIT button to exit the setup screen.
_ Press the EXIT button to exit the setup screen.
Press the 80UND EDIT button and then press the Cursor •,
Press
the TEST
TONE
• button.
button.
• Test tone will be produced as follows:
When playing a DVD or CD, this wilt work only in Stop mode.
Start
• Use this function to check that each speaker is correctly connected and that there is
no problem.
• When HDMt AUDIO is set to <ON> (audio is produced through TV speakers),
the TEST TONE function is not available.
L:FrontSpeaker
(L)
C:Center
Speaker SW:Sebwoofer
_" To end the test tone, press the TEST TONE button again.
R:FrontSpeaker
(R) SL:RearSpeaker
(L) SR:RearSpeaker
(R)
Adjusting Front/Rear Speaker Balance
• You can setect between 00, -6, and OFF.
• The volume decreases as you move closer to -6.
Adjusting
Center/Rear/Subwoofer
Speaker
Level
• The volume level can be adjusted in steps from +6dB to -6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
46
47
Settings
(Con't)
Setting the DRC (Dynamic Range Compression)
This feature balances the range between
the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital
Setting the HDMI Audio
The audio signals transmitted
over the HDMI Cable can be toggled
ON/OFF
sound when watching movies at low volume at night.
1 In Stop mode, press the MENU button.
1 In Stop mode, press the MENU button.
2
2
Press the Cursor •
button to move to <Audio> and then press the ENTER button.
3 Press the Cursor •
button to move to <DRC> and then press the ENTER button.
4
Press the Cursor A
•
button to adjust the DRC.
• Whenthe Cursor • buttonis pressed,the effectis greater,andwhen the Cursor • buttonis
pressed,the effectis smatler.
Press the Cursor • button to move to <Audio> and then press the ENTER button.
3 Press the Cursor • button to move to <HDMI AUDIO> and then press
the ENTER button.
4 Press the Cursor •, • button to select <ON> or <OFF> and then press
the ENTER button.
_ Press the RETURN button to return to the previous level.
_" Press the EXIT button to exit the setup screen.
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
Setting the AV SYNC
Video may look slower than the audio if it is connected to a digital T_ If this occurs, adjust the audio delay time to to match
the video.
• HDMt AUDIO is automatically down-mixed to 2ch for TV speakers.
• tf you turn the unit off and on, or switch functions when the HDMI AUDIO is set to ON,
the HDMI AUDIO will revert to the OFF default setting.
Press the RETURN button to return to the previous level.
_- Press the EXIT button to exit the setup screen.
1 In Stop mode, press the MENU button.
2
Press the Cursor • button to move to <Audio> and then press the ENTER button.
3 Press the Cursor • button to move to <AV-SYNC> and then press
the ENTER button.
4 Press the Cursor A, • button to select the AV-SYNC Delay Time and then
press the ENTER button.
• Youcansettheaudiodelay timebetween
0 msand300ms.Setit tothe optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
48
49
Settings
(Con't)
Sound Field (DSP)/EQ Function
DSP(Digita!
Signal Processor)
: DSP modes have been designed
Dolby Pro Logic II Mode
to simulate different acoustic
environments.
You can select the desired Dolby Pro Logic II audio mode.
EQ : You can select ROCK, POR or CLASSIC to optimize the sound for the genre of music you are playing
Press the []E] PL II MODE button.
Press the DSP/EQ button.
_;
)i
.. • ... _iii?i!ii_,
_ ._ • ...
• Each time the button is pressed,
the mode changes
as follows.
• <DSP>appearson the displaypanel.
• Eachtime the buttonis pressed,the selectionchangesasfollows:
"41-
m
"O"
¸, :'iii!iiii
!iii
"41-
@
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the
actual performance.
• CINEMA : Adds realism to the movie soundtrack.
41"
i )
PRO LOGIC : You will experience a realistic multi-channel effect, as if using five speakers, while
using just the front left and right speakers.
• MATRIX : You will hear 5.1 channel surround sound•
);
STEREO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
POP, JAZZ, ROCK : Depending on the genre of music, you can select POP, JAZZ, and ROCK•
STUDIO : Provides a sense of presence as if in a studio•
• When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to
surround sound•
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE : Provides the feeling of a movie theater.
CHURCH : Gives the feel of being in a grand church•
PASS : Select this for normal listening.
• The DSP/EQ function is only available in STEREO mode.
Press the 13(3PL II mode button to show STEREO on the display.
• This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and Dolby Digital discs.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and DSP/EQ function does not work.
50
51
Settings
Listening to Radio
(Con't)
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
...................................................................................
1 Press the 13[qPL II MODE button to select <MUSIC> mode.
iil
1 Press the TUNER button to select the FM band.
2
Press the DE]PL II EFFECT button to select <PANORAMA>,
then press
2 Tune in to the desired station.
the Cursor •, • button to select the desired effect setting.
• Youcan selecteitherOor 1.
• This modeextendsthe front stereoimageto includethe surroundspeakersfor an exciting
"wraparound"effectwithsidewall imaging.
,,, •
" _<_ii:'•
_i_"'_•r
':ii:'¸¸i_::i:ili::
¸I_
_L,,
_
_
/%,
ii!
button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the v,A
broadcasting stations.
button to automatically search for active
Press the DE]PL II EFFECT button to select <C-WIDTH>, then press
the Cursor •, • button to select the desired effect setting.
• Youcan selectbetweenOand 7.
• This sets the widthof the centerimage.The higherthe setting,the lesssoundcomesfrom
the centerspeaker.
_
_
iii
3
_ _
• Automatic Tuning 1 : When the_<
iiil; i i!iii iiii
i:
@
........
@
( 'ii_ _i .i_
,
'1 Press the FUNCTION button to select the FM band.
2 Select a broadcast station.
• Automatic Tuning 1 : Press the STOP (•)
the _
_! iii
4
Press the E]E]PL II EFFECT button to select <DIMENS>, then press the Cursor
•, • button to select the desired setting
• Youcan setectbetweenOand 6.
_
button to select <PRESET> and then press
button to select the preset station.
• Automatic Tuning 2 : Press the STOP (•)
button to select <MANUAL> and then press and hold
the _._ _,-_ button to automatically search the band.
• Manual Tuning : Press the STOP ( • ) button to select <MANUAL> and then briefly press
the _
_
button to tune in to a lower or higher frequency.
!!i!iiiiiiii!!
.-- , ststheso
!!ii!!ii!
iii! d e , S ,
_- Press the MOIST button to listen in Mono/Stereo.
• Eachtime the buttonis pressed,the soundswitchesbetween<STEREO>and<MONO>.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
• In a poor receptionarea,selectMONOfor a clear,interference-freebroadcast•
selected automatically and I]DPL II (Dotby Pro Logic II) button does not work.
i
52
¸IIi! !il !iiiiiiiiii
53
Listening to Radio (Con't)
Convenient Functions
Presetting Stations
Sleep Timer Function
You can set the time that the Home Theater will shut itself ofit
fi !,....................................................................
i •
Example : Presetting FM 89.!0 in the memory
Press the SLEEP button.
1 Press the TUNER button to select the FM band.
2 Press the v,,_
• <SLEEP> will be displayed• Each time the button is pressed, the preset time changes as follows "
button to select <89.10>.
10 -* 20 -_ 30 -_ 60 -* 90 -_ 120 -_ 150 -_ OFF.
)
3
_" To confirm the sleep timer setting, press the SLEEP button.
.........
i:)iiiiiiiiiiiiiiiiii!i:i'"'%;::Ti
........ iii ii
ii!_iiiii_iiiiii_ii_:_
_!iiiii_iiii_iii)i_
_ _ _ _,;_:_:_i_
))_iii
Press the TUNER MEMORY button.
• The remainingtime beforethe HomeTheaterwilt shut itselfoff is displayed.
• Pressingthe buttonagainchangesthe sleeptime from whatyou haveset earlier.
• <PRGM>flashesin the display•
To cancel the sleep timer, press the SLEEP button until <OFF> appears on
•
ill i:_:i :iii:::,:::;': i)iiii4
Press the i.q4_
•
)) i i(
• Youcan selectbetween1 and15 presets.
Adjusting Display Brightness
You can adjust the brightness
6 Press the TUNER MEMORY button again.
_iii
i
• Pressthe TUNERMEMORYbuttonbefore<PRGM>disappearsfrom the display.
• <PRGM>disappearsfromthe displayandthe stationis storedin memory•
)i
:
'!_'i!
_'
__
,
_ To tune in to a preset station, press the _
_
........
Press the DIMMER button.
• Each time the button is pressed, the brightness of front display will be adjusted.
button on the remote control
Mute Function
a channel.
This is useful when answering
:
of the display on the main unit so it won't interfere with your movie viewing.
i i
.......
6 To preset another station, repeat steps 2 to 5.
to select
the display.
button to select preset number.
_ • This unit does not receive AM broadcasts•
a doorbell or telephone
call.
Press the MUTE button.
• <MUTEON>appearsin the display.
i_-_i_
:::iiiiii::!
i:iiiii!!iiiiii
i ::iii:i
......
iiiii:i• Torestorethe sound,pressthe buttonagainto select <MUTEOFF>.
ii _..................
:i iiii
Using Headphones
Use headphones
/J
(not supplied) for private listening pleasure.
Connect the headphones to the Headphone jack for private listening.
zi
• To prevent hearing damage, do not increase the volume excessively when using headphones•
54
55
Operating a TV with the Remote Control
TV Brand Code List
When operating a TV with the remote control
1
Press the TV button to set the remote to TV mode.
2 Press the POWER button to turn on the TV.
POWER
3 While holding down POWER, enter the code corresponding
to your brand of TV.
•
If the code matches
the TV's code, the TV will be turned off.
•
If there is more than one code listed for your TV in the table, enter one at a time to determine
which code works.
Example: For a 8amsung TV
While holding down POWER,
use tile number
buttons to enter 00, 15, l&
17 and 40.
4 Point the remote control toward the TV and press the POWER button.
If the TV turns off, the setting is complete.
•
You can use the TV POWER,
VOLUME,
CHANNEL,
and Numeric
buttons
(0~9).
• The remote control may not work on some brands of TVs. Also, some operations
possible
depending
on your brand of TV.
• If you do not set the remote control with the code for your brand of TV_ the remote
work on a Samsung
may not be
TV by default.
control wiiI
1
Admiral (M.Wards)
56157, 58
44
MTC
18
2
A Mark
01, 15
45
NEC
18. 19, 20, 40, 59, 60
3
Anam
Nikei
03
47
Onking
03
t0,11,12,
4
AOC
01, 18, 40, 48
48
Onwa
03
5
Bell & Howell (MWards)
57. 58, 81
49
Panasonic
06, 07, 08, 09, 54, 66, 67, 73, 74
6
Brocsonic
59, 60
50
Penney
18
7
Candle
18
51
PMco
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
8
Cetronic
03
52
Philips
15, 17, 18, 40, 48, 54, 62, 72
9
Citizen
03. 18, 25
53
Pioneer
63, 66, 80, 91
10
Cinema
97
54
Portland
15, 18, 59
11
Classic
03
55
Proton
40
12
Concerto
18
56
Quasar
06, 66, 67
13
Contec
46
57
Radio Shack
17. 48, 56, 60, 61, 75
14
Coronado
15
58
RCA/Proscan
18, 59, 67, 76, 77, 78, 92, 93, 94
15
Craig
03, 05, 61, 82, 83. 84
59
Realistic
03. 19
16
Croslex
62
60
Sampo
40
17
Crown
03
61
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49,
18
Curtis Mates
59. 61, 63
19
CXC
03
62
Sanyo
19, 61,65
20
Daewoo
02.03, 04, t5,16,17,18,19, 20, 2t, 22, 23, 24,
63
Scott
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
64
Sears
15, 18, 19
21
Daytron
40
65
Sharp
15, 57, 64
22
Dynasty
03
66
Signature2000 (M.WardsI
57. 58
23
Emerson
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
67
Sony
50, 51, 52, 53, 55
24
Fisher
19, 65
68
Soundesign
03. 40
25
Funai
03
69
Spectricon
01
26
Futuretech
03
70
SSS
18
27
General Electric (GE)
06, 40, 56, 59, 66, 67, 68
71
Sylvania
18.40, 48, 54, 59, 60, 62
28
Hall Mark
40
72
Symphonic
61, 95, 96
29
Hitachi
15, 18, 50, 59, 69
73
Tatung
06
30
lekel
45
74
Techwood
18
31
JC Penny
56, 59, 67, 86
75
Teknika
03, 15, 18, 25
32
JVC
70
76
TMK
18. 40
33
KTV
59, 61, 87, 88
77
Toshiba
19, 57, 63, 71
34
KEC
03. 15, 40
78
Vidtech
18
35
KMC
15
79
Videch
59, 60, 69
36
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
80
Wards
15, 17, 18, 40, 48, 54, 60, 64
37
Luxman
18
81
Yamaha
18
38
LXI (Sears)
19, 54, 56, 59, 60, 62, 63, 65, 71
82
York
40
39
Magnavox
15, 17, 18, 48, 54, 59, 60, 62, 72. 89
83
Yupiteru
03
40
Marantz
40, 54
84
Zenith
58. 79
41
Matsui
54
85
Zonda
01
42
MGA
18, 40
86
Dongyang
03. 54
43
56
46
13, t4
01.02,03,04,05,06,07,08,09,
Mitsubishi/MGA
59, 60, 98
18, 40, 59, 60, 75
57
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing
or if the instruction
dealer or Samsung
below does not help, turn off the unit, disconnect
Electronics
Service Cente_
Disc tray does not open.
Playback does not start,
Playback does not start
immediately when the
Play/Pause button is pressed.
Sound is not produced.
Sound can be heard only from a
few speakers and not all six.
Dolby Digital 5.1 CH Surround
Sound is not produced.
The remote control does not
work.
58
is not listed below
the power cord, and contact the nearest authorized
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
Audio language and subtitles
do not work.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
Menu screen does not appear
even when the menu function is
selected.
•
•
•
•
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
• Audio language and subtitles will not work for DVDs not containing
them. And depending on the disc, they may work differently.
• Are you using a disc that does not contain menus?
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
• The main unit is not working,
(Example: The power goes out
or strange noise is heard.)
• Turn off the power and hold the STOP(• ) button on the main unit
for longer than 5 seconds.
• When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
• Make sure that the DVD disc is 5.1-CH compatible.
• If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• The DVD player is not working
normally.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
The password for rating level
has been forgotten.
• While "NO DISC" messageappearson the display of main unit, hold
the main unit's STOP(• ) buttonfor longer than 5 seconds. "INITIAL"
appears on the display and all settingswill return to the default values.
• Press the POWER button.
Usingthe RESETfunction will erase all stored settings,
Do not use this unless necessary.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
• Is the remote control being operated within its operation range of
angle and distance?
• Are the batteries exhausted?
• Have you selected the mode(TVlDVD) functions of the remote
control (TV or DVD) correctly?
59
Cautions on Handling and Storing Discs
Small scratches
Be especially
on the disc may reduce sound and picture quality or cause skipping.
Language Code List
Enter the appropriate
code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" (See page 40).
careful not to scratch discs when handling them.
Handling
discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on
the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling
and Storing
Discs
When you get fingerprints
or dirt on the disc, clean it with a mild
detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the outside of the
disc.
• Condensation
may form if warm air comes into contact with cold parts inside
the player. When condensation
forms inside the player, the player may not
1027
Afar
118!
Frisian
1334
Latvian, Lettish
1506
SIovenian
1028
Abkhazian
1032
Afrikaans
1183
Irish
!345
Matagasy
1507
Samoan
1186
Scots Gaelic
! 347
Maori
1508
1039
Shona
Amharic
1194
Galician
!349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
15!1
Albanian
1045
Assamese
!203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
!209
Hausa
!353
Moldavian
1513
Siswati
1052
Azerbaijani
!217
Hindi
!356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
!357
Malay
1515
Sundanese
1057
Byelorussian
!229
Hungarian
!358
Maltese
1516
Swedish
1059
Bulgarian
!233
Armenian
!363
Burmese
1517
Swahili
1060
Bihari
!235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
!239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
!245
Inupiak
!376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
!379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
!393
Occitan
1529
Tigrinya
1079
Catalan
!254
Italian
!403
(Afan) Oromo
1531
Turkmen
1093
Corsican
1257
Hebrew
!408
Oriya
1532
Tagatog
1097
Czech
!261
Japanese
!417
Punjabi
1534
Setswana
1!03
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1!05
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1!09
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1!30
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1!42
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1!44
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1!45
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1!49
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1!50
Estonian
1305
Kashmiri
149!
Kinyarwanda
1581
Vietnamese
1!51
Basque
1307
Kurdish
1495
Sanskrit
1587
VoIapuk
1!57
Persian
1311
Kirghiz
1498
Sindhi
1613
WoIof
1!65
Finnish
13!3
Latin
1501
Sangro
1632
Xhosa
1!66
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1!71
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1!74
French
1332
Lithuanian
1505
1697
Zulu
Slovak
operate correctly. If this occurs, remove the disc and let the player stand for
1 or 2 hours with the power on.
60
61
Specifications
USB Host Feature Supported Products
Digital Camera
Finepix-A340
Fuji
DigitalCamera
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Fuji
Fuji
Fuji
Fuji
DigitalCamera
DigitalCamera
DigitalCamera
DigitalCamera
FinepixA310
KD-310Z
FinecamSL300R
Fuji
Konica
Kyocera
DigitalCamera
DigitalCamera
DigitalCamera
FinecamSL400R
FinecamS5R
FinecamXt
Kyocera
Kyocera
Kyocera
DigitalCamera
DigitalCamera
DigitalCamera
Dimage-Zl
DimageZl
DimageX21
Coolpix4200
Minolta
Minolta
Minolta
Nikon
DigitalCamera
DigitalCamera
DigitalCamera
DigitalCamera
Coolpix4300
Coolpix2200
Coolpix3500
Nikon
Nikon
Nikon
DigitalCamera
DigitalCamera
DigitalCamera
Coolpix3700
Coolpix4100
Coolpix5200
Nikon
Nikon
Nikon
DigitalCamera
DigitalCamera
DigitalCamera
Stylus410 digital
300-digital
U300
X-350
Olympus
Olympus
Olympus
Olympus
DigitalCamera
DigitalCamera
DigitalCamera
DigitalCamera
C-760
C-5060
X1
Olympus
Olympus
Olympus
DigitalCamera
DigitalCamera
DigitalCamera
U-mini
Lumix-PZ20
DMC-FX7GD
LumixL033
Olympus
Panasonic
Panasonic
Panasonic
DigitalCamera
DigitalCamera
DigitalCamera
DigitalCamera
LUMIX DMC-F1
Optio-S4O
Optic-S50
Panasonic
Pentax
Pentax
DigitalCamera
DigitalCamera
DigitalCamera
Optic 33LP
Optic MX
Digimax-420
Pentax
Pentax
Samsung
DigitalCamera
DigitalCamera
DigitalCamera
Digimax-400
Sora PDR-T3O
Coolpix5900
Coolpix$1
Samsung
Toshiba
Nikon
Nikon
DigitalCamera
DigitalCamera
DigitalCamera
DigitalCamera
Nikon
Panasonic
Minolta
DigitalCamera
DigitalCamera
DigitalCamera
Olympus
DigitalCamera
Coolpix7600
DMC-FX7
DimageXt
AZ-1
62
I USB Flash Disc
Cruzer Micro
Cruzer Mini
Sandisk
Sandisk
USB 20 USB Plash Drive 128M
USB 20 128M
Cruzer Mini
Sandisk
USB 20 256M
SONY Micro Vault
FLEX DRIVE
Sony
Serotech
USB 20 64MB
USB 20 32MB
AnyDrive
XTtCK
AL tech
LG
USB 20 128MB
USB 20 128M
Iomega
Imation
USB 20 128M
USB 20 64M
XTiCK(M)
EZDrive
USB 20 64M
USB 20 64M
CreativeMuVoNX128M
Iriver H320
Creative
Ibver
128 MB MP3 Player
2OGHDDMP3 Player
YH-920
YP-T7
YP-MT6
Samaung
Samaung
Samaung
20G HDDMP3 Player
MP3 Player
MP3 Player
YP-T6
YP-53
YP-ST5
Samsung
Samsung
Samsung
MP3 Player
MP3 Player
MP3 Player
YP-T5
YP-6O
YP-780
YP-35
Samaung
Samsung
Samsung
Samsung
MP3 Player
MP3 Player
MP3 Player
MP3 Player
YP-55
iAUDIOU2
iAUDIOG3
iAudioM3
Samaung
Cowon
Cowon
Cowon
MP3 Player
MP3 Player
MP3 Player
HDDMP3 Player
SI-M50OL
H1O
YP-T5 VB
Sharp
Ibver
Samaung
256MBMP3 Player
MP3 Player
MP3 Player
YP-53
Samsung
256MBMP3 Player
Micro Mini
iFlash
LG
RiDATA
iii'ii i!ii!!i!!i! ! ! i
!! i
i i i ! i! !
!!iiii
¸if!fill
¸iii iliiiiiiiiiiiiiiii
iiiiiiil;i
_i_ _;i__il
ii_i _i_i_i _!_;
F iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;;;;
ii
T
U
F
a
MR
Usable Sensitivity
S/N Ratio
Distortion
' 10dB
60dB
'1%
MP3 Player
A
M
P
Front speaker output
Center speaker output
Rear speaker output
1
F
t
E
Subwoofer speaker output
Frequency range
SIN Ratio
Channel separation
R
Input sensitivity
L
I USB External HDD
63
Warranty
Contact
SAMSUNG
If you have any questions
North America
Latin America
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced
parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and
products assume the remaining original warranty, or ninety (90) days, whichever is longer.
THEREARENOEXPRESSWARRANTIES
OTHERTHANTHOSELISTEDANDDESCRIBED
ABOVE,ANDNOWARRANTIES
WHETHEREXPRESSOR IMPLIED,INCLUDING,
BUTNOTLIMITEDTO,ANYIMPLIEDWARRANTIES
OF MERCHANTABILITY
OR
FITNESSFORAPARTICULAR
PURPOSE,SHALLAPPLYAFTERTHEEXPRESSWARRANTYPERIODSSTATED
ABOVE,ANDNO
OTHEREXPRESSWARRANTYORGUARANTY
GIVENBYANYPERSON,
FiRMOR CORPORATION
WtTHRESPECTTO
THISPRODUCTSHALLBEBINDINGONSAMSUNG.SAMSUNGSHALLNOTBELIABLEFORLOSSOF REVENUEOR PROFITS,
FAILURETO REALIZESAVINGSOR OTHERBENEFITS,
ORANYOTHERSPECIAL,
INCIDENTAL
OR CONSEQUENTIAL
DAMAGES
CAUSEDBYTHEUSE,MISUSEORINABILITYTOUSETHISPRODUCT,
REGARDLESS
OFTHELEGALTHEORYONWHICH
THECLAIMISBASED,ANDEVENIF SAMSUNGHASBEENADVISEDOFTHEPOSSiBILiTY
OFSUCHDAMAGES.
NORSHALL
RECOVERY
OFANYKiNDAGAINSTSAMSUNGBEGREATERINAMOUNTTHANTHEPURCHASEPRICEOFTHEPRODUCTSOLD
BYSAMSUNG
ANDCAUSINGTHEALLEGEDDAMAGE.WITHOUTLIMITINGTHEFOREGOING,
PURCHASER
ASSUMESALLRISK
ANDLIABILITYFORLOSS,DAMAGEOR INJURYTOPURCHASER
ANDPURCHASERiS
PROPERTY
ANDTO OTHERSAND
THEIRPROPERTY
ARISINGOUTOFTHE USE,MISUSEOR INABILITY
TO USETHtSPRODUCTSOLDBYSAMSUNGNOTCAUSED
DIRECTLY
BYTHENEGLIGENCE
OF SAMSUNG.
THISLIMITEDWARRANTY
SHALLNOTEXTENDTOANYONEOTHERTHAN
THEORIGINALPURCHASER
OF THISPRODUCT,
iS NONTRANSFERABLE
ANDSTATES
YOUREXCLUSIVEREMEDY.
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
Europe
cIs
GERMANY
HUNGARY
FrAMA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKBA
SPAIN
SWEDEN
U.K
Republic of Ireland
SwitzerJand
RUSSIA
KAZAHSTAN
UZBEKISTAN
UKRAINE
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
CHINA
HONG KONG
INDIA
Asia Pacific
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
To obtain warranty hardware service, please contact SAMSUNG at:
SamsungElectronicsAmerica,Inc.
105ChallengerRoad RidgefietdPark,NJ07660-0511
1-800-SAMSUNG
(726-7864)andwww.samsung.com
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RmCO
RER DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
SAMSUNG is obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand
name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if
provided, are on an "AS IS" basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may
provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to
the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to
the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and
uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish;
accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities,
services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and
authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage,
fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and
environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation;
reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems.
SAMSUNG does not warrant uninterrupted or error-free operation of the product.
CANADA
MEXICO
U.SA
ARGENTINE
BRAZIL
One (1) Year Parts / Ninety (90) days Labor
(90 days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the
United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and
service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized
service center. Transportation of the product to and from the service center is the responsibility of the purchaser.
or comments
Country
Region
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and
delivered new, inthe original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing
defects in materials and workmanship for a limited warranty period of:
WORLD
Middle East & Africa
UA.E
WIDE
relating to Samsung
Customer
products,
Care
please contact the SAMSUNG
Web Site
Center
I=800=SAMSUNG (7267864)
01 =800=SAMSUNG (7267864)
I=800=SAMSUNG (7267864)
0800=333=3733
0800=124=421
4004=0000
800=726=7864 (SAMSUNG)
0=800=507=7267
1=800=10=7267
800=6225
1=800=299=0013
1=800=234=7267
800-7267
1 =800=682=3t 80
1=800=751=2676
www.samsung.com/ca
www.samsunq.com/mx
1-800-7267-864
0=800=I00=5303
01=80001 t2112
02 201 2418
844 00O 844
Distributor pro Ceskou republiku :
Samsung Zrt. _eska organiza_n[ sloika
Vyskodilova 4, 14000 Praha 4
70701970
030-6227 515
3260 SAMSUNG or
08 25 08 65 65 (€ 0,15/Min)
01805 =121213 (€ 0,t4/Min)
06=80=SAMSUNG (7267864)
800=SAMSUNG (7267864)
www.samsung.com/latin
www.samsung.com/latin
www.samsunq.corn.co
www.sarnsung.com/be
0032 (0)2 201 24 18
0900 20 200 88 (€ 0,10/Min)
815=56 480
0801 801 881
80 8 200 128
0800-SAMSUNG (726786)
902 1011 30
0771 =400 200
0870 SAMSUNG (7267864)
0818 717 t00
0800=7267864
8=800=200=0400
8=800=080=1 t 88
8=800=120=0400
8=800=502=0000
8=800=77777
800=7267
800=7267
1300 362 603
800=810=5858, 010=6475 1880
3698 = 4698
3030 8282
1800110011
0B00=112=8888
0120=327=527
1800=88=9999
1800=I0=SAMSUNG (7267864)
1800=SAMSUNG (7267864)
1800=29=3232
02=689=3232
0800=329=999
1 800 588 889
www,samsunc_.com
www.samsuncj.com/ar
www.samsung.com/br
www,samsung
com/d
www.samsung.com/Batin
www samsung.com/latin
www samsung.com/latin
www samsung.com/latin
www,samsung,com/latin
www.samsung.com/latin
www.samsung.com/latin
www samsung.com/latin
www samsung.com/cz
www.samsung,com/dk
www,samsung
corn/fi
www.samsung.com/rr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsungJu
www.samsung_com/nl
www.samsung_com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsunq.com/uk
www.samsunq.com/uk
www.samsung.com/ch
www.samsung.ru
www.samsunq.kz
www.samsun£.uz
www.samsung.com/ur
www.samsungJt
www.samsung.com/Rv/index.htm
www.samsunq ee
www samsung.corn/au
www,samsung,com.cn
www samsung,com/hk
www.samsung.com/in
www.samsung.com/id
www.samsunq.com/ip
www.samsunq.com/my
www.samsung_com/ph
www.samsunq,com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsunq com/vn
0860 7267864 (SAMSUNG)
www.samsung.com/za
800SAMSUNG
8000=4726
www samsung.com/mea
(7267864)
customer care centre.