Miele CS 1221 Operating instructions

Operating and Installation
Instructions
Ceramic combiset with Induction
CS 1221
To prevent accidents and
appliance damage,
read these instructions
before
installation or use.
en - US
M.-Nr. 07 346 540
2
Contents
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to the combiset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Burner data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Clean the combiset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Induction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
How it works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning the burner On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Auto-heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Booster function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Keep warm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Tipps zum Energiesparen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Child Safety Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Overheating protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Technical Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . 30
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Installation of multiple appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Attach the spring clips and support bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Tiled surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Help protect our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING- When using your gas
appliance follow basic
precautions, including the
following:
This gas combiset conforms to all
uniform safety codes and
regulations.
Read all instructions before
installation or use to prevent
injury and appliance damage.
These instructions contain
important information on
installation, safety, use and
maintenance of this appliance.
They will help you avoid injury
and damage to the appliance.
Keep these operating instructions
in a safe place and pass them on
to any future user.
SAVE THESE INSTRUCTIONS
Correct usage
~ This appliance is not designed for
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
– shops, offices and similar work
environments,
– by customers in hotels, motels, Bed
& Breakfasts or similar residential
environments.
~ This appliance is not intended for
outdoor use.
4
~ Only use the combiset for residential
cooking, and for the purposes
described in this manual.
Other uses are not permitted and can
be dangerous.
~ Persons who lack physical, sensory
or mental abilities, or experience with
the appliance should not use it without
supervision or instruction by a
responsible person.
Children
~ Activate the Child Safety Lock so
that the combiset cannot be turned on
inadvertently.
~ Children should not be left
unattended in an area where the
appliance is in use. Never allow
children to sit or stand on any part of
the appliance.
Caution: Do not store items of interest
to children in cabinets above the
appliance. Children climbing on the
appliance to reach these items could
be injured.
~ The appliance is hot during use and
remains so for some time after being
switched off. Keep children away from
the appliance.
~ Ensure that any packing material, is
disposed of safely and kept out of the
reach of children. Danger of
suffocation!
~ Keep all pots and pans out of the
reach of children. Danger of burning or
scalding.
IMPORTANT SAFETY INSTRUCTIONS
Technical Safety
~ Installation, repair and maintenance
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
~ Be sure your appliance is properly
installed and grounded by a qualified
technician.
~ Before installing the combiset,
check for externally visible damage.
Do not operate a damaged appliance.
~ To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
~ Before installation, make sure that
the voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
appliance damage. Consult a qualified
electrician if in doubt.
~ The combiset is not designed for
use with an external timer or a remote
control system.
~ Before servicing, disconnect the
appliance from the main power supply.
~ Do not operate any appliance with a
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical Service Department.
~ Under no circumstances open the
outer casing of the appliance.
~ While the appliance is under
warranty repairs should only be
performed by an authorized service
technician. Otherwise the warranty is
void.
~ In the event of any damage to the
appliance, it must be turned off immediately and disconnected from the main
power supply. Contact Miele’s
Technical Service Department.
Do not use the appliance until it has
been repaired. Ensure power is not
supplied to the appliance until repair
work is completed.
~ Defective components should be
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
~ Do not use an extension cord to
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance.
5
IMPORTANT SAFETY INSTRUCTIONS
~ Do not cook on a broken combiset.
Any breakages or cracks in the ceramic
surface of the appliance are defects
and must be treated as such. If the
combiset should break, cleaning
solutions and spills may penetrate the
broken combiset and create a risk of
electric shock. Do not use the
appliance until it has been repaired.
~ Protect your hands with oven mitts
~ Do not use the appliance until it has
been properly installed in the
countertop.
~ Do not heat unopened containers.
~ Be sure that the power cord does
not come in contact with any "hot spots"
after installation.
~ Do not flambé under an exhaust
Safety
~ Do not use the appliance until it has
~ Individuals with a pacemaker or
similar medical device:
Please note that an electromagnetic
field develops when the combiset is
turned on. It is not likely that this will
affect the pacemaker or similar device.
If in doubt contact the manufacturer of
the device or your doctor.
~ Keep magnetized items, e.g. credit
cards, disks, etc. away from the
combiset while in operation. Damage
may result.
~ Do not touch the combiset or the
surrounding areas during or immediately after use. The combiset may be hot
even though it is dark in color. Wait until
the residual heat indicators go out.
6
or potholders when using the
appliance. Use only dry, heat resistant
potholders. Moist or damp potholders
used on hot surfaces can result in
steam burns. Do not let the potholder
touch the hot heating elements. Do not
use towels or other bulky items near the
appliance.
Built-up pressure may cause the
container to burst and result in injury.
hood. Flames could be drawn up into
the hood by the suction and the grease
filters may ignite.
been properly installed in the
countertop.
~ Do not store items on the appliance
when not in use. Items could melt or
catch fire from residual heat or if the
appliance is turned on inadvertently.
Always switch the burner(s) off after
use.
~ Do not store aerosols, combustibles
or any other easily flammable materials
underneath or adjacent to the
appliance.
IMPORTANT SAFETY INSTRUCTIONS
~ The combiset is fitted with a cooling
fan. Drawers under the combiset are
not recommended. If a drawer is fitted
directly underneath the combiset,
ensure that there is sufficient space
between the drawer, its contents and
the underside of the appliance in order
to ensure sufficient ventilation for the
combiset. Do not store small items or
paper in the drawer. They could get
sucked into the housing by the fan and
cause damage or impair cooling.
Ensure that no aerosols, combustible
liquids or other flammable materials are
kept in this drawer. If cutlery inserts are
to be placed in the drawer they must be
made of heat-resistant material.
~ Be aware of loose fitting or hanging
~ Metallic items kept in a drawer
under the combiset can become hot
when the appliance is used for a longer
period of time. Use caution.
~ Make certain that the power cords of
~ If the combiset is installed above a
pyrolytic oven it should not be used
during the pyrolytic process. The
overheating protection feature of the
combiset might be activated.
~ Never cover the burner with a cloth
or protective oven foil. If inadvertently
turned on or if there is residual heat, a
fire could result.
~ When more than one combiset is
installed next to each other, be sure not
to place hot pots or pans on the center
line. This could damage the seal.
garments when operating the
appliance, they may present a fire
hazard.
~ Never leave a combiset unattended
at high settings or when cooking with oil
or fat. Overheated oil could ignite.
Always heat oil slowly, monitoring it as it
heats.
~ Never heat an empty pan unless the
pan manufacturer states that you can
do so.
~ Do not use water on grease fires.
Smother or use a dry chemical or
foam-type extinguisher on any fire or
flame.
small appliances do not come in
contact with the appliance. The
insulation of the cable could become
damaged. Danger of electric shock!
~ Be careful not to drop anything on
the ceramic surface of the combiset.
Even lightweight objects may cause
damage.
~ Pot and pan handles should be
turned inward and not extend over the
countertop to reduce the risk of burns,
ignition of flammable materials, and
spills.
~ Be careful not to drop anything on
the ceramic surface of the combiset.
Even lightweight objects may cause
damage.
7
IMPORTANT SAFETY INSTRUCTIONS
~ Pot and pan handles should be
turned inward and not extend over the
countertop to reduce the risk of burns,
ignition of flammable materials, and
spills.
~ Do not allow solid or liquid sugar,
~ Do not use pots or pans with
pronounced edges or ridges on the
ceramic combiset. These could scratch
the combiset permanently. See
"Cookware" for more information. Grains
of salt and sand can cause scratches.
Make sure that the bases of any pots
and pans are clean, free of any fat or
oils, and are dry.
~ Any spills should be removed as
~ To prevent burns and breathing
difficulty, allow the combiset to cool
before cleaning. Some cleaners may
produce toxic fumes if applied to a hot
surface.
~ Keep the combiset clean. Salt,
sugar, and grit can cause scratches.
~ When wiping spills on a hot
combiset with a wet sponge or cloth, be
careful to avoid steam burns.
~ Do not let flammable materials,
i.e. cooking grease, accumulate on the
appliance.
~ Do not use a steam cleaner to clean
this appliance. Steam could penetrate
electrical components and cause a
short circuit.
8
pieces of plastic or foil to fall on the
burner when hot. If these residues are
allowed to cool on the ceramic surface
pitting or even cracking may occur.
quickly as possible to prevent them
from burning on and becoming difficult
to remove.
SAVE THESE INSTRUCTIONS
AND REVIEW THEM
PERIODICALLY
Guide to the combiset
a Burner with booster
Indicators
b Display
c Indicators
d Control knob
l On/Off indicator
m Booster indicator
n "Residual Heat" indicator
9
Guide to the combiset
Display
ß
= No pan on burner or pan is unsuitable
A
= Auto-heat
F
= Fault (see "Frequently asked questions")
C/0
= Safety cut-out feature (see "Safety features")
I
= Booster activated
H
= Overheating protection (see "Safety features")
L
= Child safety lock (see "Safety features")
Burner data
CS 1221
Minimum to maximum
diameter*
7" - 11 3/4"
(18 cm - 30 cm)
Rating in watts 240 V**
normal:
with Booster:
* Pots with a bottom diameter in the stated range may be used.
** The stated power may vary depending on the size and material of the
cookware.
10
2,400
3,700
Before using for the first time
Clean the combiset
Heat the appliance
^ Before using for the first time, clean
the appliance with a damp cloth and
dry with a soft cloth.
When the combiset is first connected to
the power supply and after a power
failure, all indicators in the display will
light up for approx. 1 second. The
combiset can be used as normal once
the indicators go out.
Do not use liquid dish soap to clean
the combiset, this may cause
permanent blue discolorations.
Metal components of the appliance
have a protective coating which may
give off a slight odor the first time
the appliance is heated.
The smell will dissipate after a short
time and does not indicate a faulty
connection or appliance defect.
11
Induction
How it works
An induction coil is located under the
burner. When the burner is switched
on, this coil creates a magnetic field
which impacts directly on the base of
the pan and heats it up. The burner
itself is heated indirectly by the heat
given off by the pan.
Induction burners only work when a
magnetic based pan is placed on it
(see "Cookware").
Induction automatically recognizes the
size of the pan, i.e. heat is only
generated in the area covered by the
base of the pan.
The burner will not work:
– if it is switched on without a pan in
place, or if the pan is unsuitable
(non-magnetic base).
– if the diameter of the pan is too small.
– if the pan is taken off the burner
when it is turned on.
If this happens, ß will flash in the
display.
If a suitable pan is placed on the burner
within 3 minutes, ß will go out and you
can continue cooking as normal.
12
If no pan or an unsuitable pan is placed
on the burner, the burner and the
combiset will switch off automatically
after 3 minutes. 0 will flash alternately
with C in the display.
To use the burner again as normal, first
turn the control knob to "0".
Be careful not to place cutlery or
other metal objects on the combiset.
When the appliance is switched on,
or when there is residual heat
present, there is the risk of metal
objects heating up quickly.
Beware of burns.
Depending on the material, other
objects left on the combiset could
also melt or catch fire.
Turn off the burner after use.
Induction
Noises
When using an induction burner, the
following noises can occur in the pan,
depending on what it is made of and
how it is constructed.
– Higher power settings may cause a
buzz. This will decrease or cease
altogether when the power setting is
reduced.
The appliance has a cooling fan to help
extend the life of the electronics. When
the combiset is being used at high
levels for a long period of time, this will
come on and you will hear a whirring
sound. The fan may continue to run
after the appliance has been switched
off.
– If the pan base is made of layers of
different materials (e.g. a
sandwiched base), a cracking sound
may be heard.
– You may hear a clicking sound from
the electronic switches, especially on
lower settings.
13
Induction
Cookware
Pan size
Suitable pans include:
To make optimum use of the burner,
choose cookware that fits between the
inner and outer marking of the burner. If
the base diameter of the pan is smaller
than the inner marking, the induction
heating will not work. The burner will
behave as if it has no pan on it.
– stainless steel pans with a magnetic
base
– enameled steel pans
– cast iron pans
Unsuitable pans:
– stainless steel pans without a
magnetic base
– aluminum and copper pans
– glass, ceramic or earthenware pots
and pans
To test whether a pot or pan is suitable
for use on an induction combiset, hold
a magnet to the base of the pan. If the
magnet sticks, the pan is suitable.
Unless the pan manufacturer states
that you can do so, do not use pans
with very thin bases on this
combiset, and never heat empty
pans. This could damage the
appliance and cookware, and effect
the uniformity of the cooking.
14
Use
Turning the burner On/Off
Residual heat indicator
^ To turn the burner on, press the
control knob down and turn it
clockwise a to the desired setting.
The residual heat indicator will go out
once the combiset has cooled to a safe
temperature.
As long as the residual heat
indicator is lit do not touch or place
any heat sensitive items on the
burner. Danger of burns, and fire
hazard.
^ To turn the burner off, turn the
control knob counterclockwise b to
"0".
Do not turn the burner on without
pressing the control knob down, and
do not turn the knob past "B I" to
reach "0".
When the combiset is turned on the
On/Off indicator lights up. Once the
combiset has reached a factory set
temperature the residual heat indicator
will light.
When the combiset is turned off the
On/Off indicator will go out.
15
Use
Settings
Use for
Power level*
Melting butter, chocolate, etc.
Dissolving gelatin
Prepare yogurt
1-2
Warming small quantities of food or liquid
Keeping delicate dishes warm
Cooking rice,
Thawing frozen vegetables
1-3
Warming liquid or half-set foods
Thickening sauces, e.g., hollandaise sauce
Cooking rice pudding
2-4
Defrosting frozen foods
Steaming vegetables, fish, etc.
Cooking pasta, soups, etc.
Steaming grains
3-5
Boiling and continued cooking of large quantities of food
5-6
Gently sautéing fish, cutlets, sausages, fried eggs, etc.
(without smoking the oil/fat)
Frying pancakes, crepes, etc.
Boiling large quantities of water
Parboiling
Keep warm
7
7-8
9
(
* These settings are intended as guidelines only. When cooking with large pots,
large quantities of food/liquid or without using a lid, a higher setting is needed.
For smaller quantities select a lower setting.
16
Use
Auto-heat
Activating Auto-heat
When Auto-heat has been activated,
the burner switches on automatically at
the highest setting and then switches to
the continued power level which was
selected. The "heat-up" time depends
on which continued power level has
been chosen (see table).
^ Turn the control knob
counterclockwise as far as it will go
and hold until an A appears in the
display.
Continued
power level*
Heat-up time
(approx.)
min : sec
1
0 : 15
2
0 : 15
3
0 : 25
4
0 : 50
5
2 : 00
6
5 : 50
7
2 : 50
8
2 : 50
9
-
If the knob is held too long, an L will
appear in the display and the Lock
is activated (see "Child safety lock").
^ Turn the control knob clockwise to
the desired continued power level.
If a continued power level is not
selected within 5 seconds, the
Auto-heat feature is not activated.
Once Auto-heat has been activated the
continued power level must be set
within 10 seconds. After this time the
level cannot be changed.
Changing the continued power level
after 10 seconds will deactivate the
Auto-heat function.
During the Auto-heat phase an A will
show in the display.
The higher continued cooking settings
are generally used for frying, a short
heat-up time is needed to heat up the
pan initially.
Taking a pan off the burner while
Auto-heat is in operation interrupts the
function. It will resume if a pan is
placed back on the burner within
3 minutes.
17
Use
Booster function
To activate the Booster
The burner is equipped with a booster
function to temporarily increase the
power level. This boost is intended to
quickly bring large quantities of water
to the boil, e.g. cooking pasta. When
the Booster is activated the burner will
operate with extra power for 10
minutes.
^ Turn the control knob past power
level 9 to BI, then turn back to level 9.
Once the booster time has elapsed the
burner will automatically revert to power
level 9. The B indicator and I in the
display will go out.
Taking a pan off the burner while the
booster is in operation interrupts the
booster function. It will resume if a pan
is placed back on the burner within 3
minutes.
18
I appears in the display and the B
indicator lights up.
To deactivate the Booster function
The booster function can be turned off
early if desired.
^ Turn the control knob past power
level 9 to BI and then back to 9; or
simply reduce the power level.
Use
Keep warm
Tips
This function can be used for keeping
food warm right after it has been
cooked. It is not for reheating food
which has already cooled.
– Cover the pan with a lid.
Once activated the keep warm function
will switch off automatically after 2
hours.
– It is not necessary to stir the food
while it is being kept warm.
– Nutrients are lost when food is
cooked, therefore try to keep the
warming time to a minimum.
19
Energy saving tips
– Whenever possible, keep pots and
pans covered while cooking. This
helps keep in the most possible heat.
– When cooking small guantities of
food, use a small pot or pan. This will
required less energy to heat up than
a large pot.
– Cook with a small amount of water.
– Using a pressure cooker will greatly
reduce cooking time.
– Lower the flame after browning or
parboiling.
20
Safety features
Child Safety Lock
Keep children away from the
combiset for their own safety.
The combiset has a Child Safety Lock
to prevent children from turning on the
burner.
To activate the Child Safety Lock:
^ Turn the control knob
counterclockwise as far as it will go,
and hold until L appears in the
display.
If the control knob is touched after the
lock is activated an L will appear in the
display for 3 seconds.
Safety cut-out
The combiset has a safety cut-out
feature in case it is not turned off after
use.
If the burner is heated for an unusually
long period of time (see table), and the
power level settings are not adjusted,
the combiset will turn itself off
automatically and the residual heat
indicator will light.
C and 0 will flash alternately in the
display.
^ To use the combiset again, first turn
the control knob to "0".
The On/Off indicator and the display
will go out.
To deactivate the Child Safety Lock:
^ Turn the control knob
counterclockwise as far as it will go,
and hold until the L goes out and 0
appears briefly in the display.
Power level
Maximum
operating hours
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
21
Safety features
Overheating protection
The induction coils and the cooling
element of the electronics are fitted with
an overheating protection feature. This
prevents the induction coils and cooling
element from overheating.
This mechanism works in the following
ways:
– If the booster function is being used,
it will be switched off.
– The power level will be reduced.
– If an induction coil is affected, the
burner will turn off and an H will
appear in the display.
^ Turn the control knob to "0".
Once the H has gone out, the combiset
can be used again as normal.
If the control knob is not turned back to
"0", C and 0 will flash in the display. To
use the burner again, first turn the
control knob to "0".
– If the cooling element is affected, the
power supply to the burner will be
reduced.
Once the cooling element has cooled
sufficiently the burner will continue
working again at the original power
level.
– If the temperature continues to rise
after the power level has been
reduced, the burner will switch off.
C and 0 will flash alternately in the
display.
^ Turn the control knob to "0".
22
Once the burner has cooled to a safe
temperature the combiset can be used
again as normal.
The overheating protection feature may
be activated by:
– heating an empty pan,
– oils or fats being heated on the
highest power level,
– the underside of the appliance is not
sufficiently ventilated.
If the overheating protection feature
activates again, contact Miele
Technical Service.
Cleaning and care
Do not use a steam cleaner to clean
this appliance. Steam could
penetrate electrical components and
cause a short circuit. Pressurized
steam could cause permanent
damage to the surface.
Do not use any sharp pointed
objects which could damage the
seal between the ceramic surface,
the surrounding frame and the
countertop.
Never use abrasive cleaners,
caustic (oven) cleaners, dishwasher
detergent, scouring pads, steel wool
or hard brushes. They will damage
the surface.
The ceramic surface can be cleaned
using a cleaner for ceramic
surfaces. Follow the manufacturer’s
instructions.
Be sure that pot and pan bases are
clean and dry.
After cleaning dry the ceramic
surface with a soft cloth to prevent a
build up of limescale deposits.
Clean any spills immediately before
they become difficult to remove.
Do not use liquid dish soap to clean
the ceramic surface. When using
dish soap a film is left on the surface
which can lead to discolorations on
the ceramic surface. These
discolorations cannot be removed.
Clean the ceramic surface regularly
with a ceramic cleaner.
Clean the appliance regularly,
preferably after each use. Allow the
appliance to cool before cleaning.
Make sure that no cleaner residue
remains on the ceramic surface by
carefully wiping the combiset with a
damp cloth. They may damage the
combiset or produce toxic fumes
when heated.
23
Cleaning and care
Ceramic surfaces
Stainless steel
^ Wipe off any soiling using a damp
cloth. Stubborn soiling is best
removed with a shielded scraper
blade.
Clean stainless steel surfaces with
warm water and liquid dish soap
applied with a non-abrasive sponge
and then wipe dry with a soft cloth.
Soak baked or hardened spills first to
loosen them.
^ Apply a ceramic cleaner (available
from Miele) using a soft cloth or
paper towel.
^ To remove any limescale deposits or
metallic residue apply a ceramic
cleaner using a soft cloth or use a
shielded scraper blade if necessary.
^ After cleaning wipe the ceramic
surface with a damp cloth and dry.
A cleaner with a special additive to
prevent water marks and smears on the
ceramic surface may be used.
Any melted solids like sugar, plastic or
aluminum foil should be removed as
quickly as possible, while the burner is
still warm. If they are allowed to harden
the combiset may become pitted.
^ Turn the burner off.
^ Using a shielded scraper blade,
scrape the melted item immediately
off the burner while it is still hot.
Use caution: Danger of burns!
^ Allow the combiset to cool and clean
as previously described.
24
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner (available from Miele).
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Do not use stainless steel cleaner on
or around the printing, it may rub
off. Use only a soft sponge with a
mild solution of warm water and
liquid dish soap to clean this area.
Frequently asked questions
,Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
What if the burner does not heat up after it is turned on?
Possible fault
Solution
The Child safety lock is activated.
See "Child safety lock".
The Overheating protection feature See "Overheating protection".
has activated.
The main fuse has blown.
Check the main fuse.
Replace the fuse or "trip" the circuit breaker.
The demo-mode is activated.
When demo mode is activated, d
will appear in the display for a few
seconds after turning the
appliance on.
To de-activate, turn the control knob briefly
(approx. 1 sec) to the left, two times, all the
way to the stop, then turn it a third time and
hold for approx. 3 seconds.
If none of the above is the case, turn the control knob to "0", and disconnect the
appliance from the electrical supply for 1 minute.
Reconnect the power and turn the appliance on. If it still does not heat, contact
Miele Technical Service.
What if ß appears in the display?
Possible fault
Solution
The burner is turned on but no
cookware is placed on it.
Turn the burner off and place suitable
cookware on it.
The pan being used is not suitable See "Cookware" for information on type and
for the combiset or is not the right size of suitable cookware.
size.
What if an F appears in the display?
Possible fault
Solution
The temperature sensor for the
burner is faulty.
Do not use the combiset until it has been
repaired. Contact Miele Technical Service.
25
Frequently asked questions
What if the combiset turns itself off automatically?
Possible fault
Solution
Either the "Safety cut-out" feature or the See "Overheating protection" or "Safety
"Overheating protection" feature has
cut-out".
been activated.
What if one of the following errors occurs:
- The booster function turns off automatically ahead of time.
- C and 0 flash alternately in the display.
- H is shown in the display.
Possible fault
Solution
The overheating protection feature has
been activated.
See "Overheating protection".
The food does not cook when using the Auto-heat function.
Possible fault
Solution
Large amounts of food are being
cooked.
Select a higher continued power level
or begin cooking at the highest level
and turn the power back by hand.
The pot or pan does not transfer the
heat properly.
Use the correct pots and pans, see
"Cookware".
The cooling fan continues to run after the combiset is turned off.
Possible fault
Solution
This is not a fault.
The fan continues to run until the
appliance has cooled sufficiently. It will
turn off automatically.
26
Technical Service
In the event of a fault which you cannot
easily fix yourself, please contact the
Miele Technical Service Department at
the address on the back of this booklet.
When contacting Technical Service
please quote the serial number and
model of the appliance.
Adhere rating label sticker supplied
with the appliance below.
27
Technical Service
MieleCare
(USA only)
MieleCare, our Extended Service
Contract program; gives you the
assurance of knowing that your
appliance investment is covered by 5
years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by the Miele Service department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
http://mieleusa.com/mielecare
28
Installation Instructions
IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Note to the installer:
Please leave this instruction book
with the consumer for the local
electrical inspector’s use.
The minimum distances given in
these Installation Instructions must
be observed in order to ensure safe
operation. Failure to do so increases
the risk of fire.
The cabinetry and venting hood
should be installed first to prevent
damage to the appliance.
~ The countertop must be bonded
with heat resistant (212°F/100°C)
adhesive to prevent distortion or
dissolving.
Any back splashes must be
heat-resistant as well.
~ The appliance must not be installed
over a dishwasher, washer, dryer,
refrigerator or freezer. Heat radiated by
the appliance may damage them.
~ To eliminate the risk of burns or fire
by reaching over heated surfaces
cabinet storage space above the
appliance should be avoided. If cabinet
storage is necessary, the risk can be
reduced by installing a venting hood to
project horizontally a minimum of 5"
(127 mm) beyond the bottom of the
cabinets.
30
~ This appliance must not be used in
a non-stationary location (e.g. on a
ship).
~ You must ensure the power cord for
the appliance will not be subject to any
mechanical strain after installation.
~ If a protective base is installed
beneath the appliance, a minimum
distance of 1 9/16" (40 mm) between the
top of the protective base and the
bottom of the appliance must be
maintained.
~ The appliance must not be
permanently sealed into the countertop
when installed. The sealing strip under
the edge of the appliance provides a
sufficient seal for the countertop. See
"Sealing".
Keep this instruction book in a safe
place for reference and pass it on to
any future user.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Safety distances above the
appliance
The minimum safety distance given by
the hood manufacturer must be
maintained between the combiset and
the hood above it. See the installation
instructions of the hood for these safety
measurements.
If the hood manufacturers instructions
are not available or if flammable objects
are installed over the combiset (e.g.
cabinets, utensil rail, etc.), a minimum
safety distance of 30" (760 mm) must
be maintained.
If there is more than one appliance
beneath a hood (e.g. wok burner
and electric combiset), and they
have different minimum safety
distances always observe the
greater distance.
31
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Safety distances to the sides
of the appliance
The appliance should only be installed
as shown in the illustrations, while
maintaining the required safety
distances shown. Do not install the
appliance between two tall cabinets,
this is a fire hazard.
A distance of at least 2" (50 mm) must
be kept between the countertop cut-out
and the rear wall because of the high
temperatures radiated.
The minimum distance required from
the countertop cut-out to the side wall
a:
2" (50 mm)
6" (150 mm)
for CS 1112
CS 1122
CS 1212
CS 1221
CS 1223
CS 1326
CS 1327
CS 1411
for
10" (250 mm) for
2 " (50 mm)
recommended
2"
(50mm)
1
not recommended
CS 1312
CS 1322
CS 1421
CS 1011
CS 1012
CS 1012-1
CS 1028
not permitted
32
Installation
Safety distance from the wall covering
If a wall covering is installed, a minimum safety distance must be maintained
between the countertop cut-out and the covering, since high temperatures can
damage these materials.
If the covering is made of a combustible material (such as wood), the distance
between the countertop cut-out and the wall covering must be a minimum of
2" (50 mm).
For coverings made of non-combustible materials (such as metal, marble, granite
or ceramic tiles) the minimum safety distance e between the countertop cut-out
and the wall covering must be 2" (50 mm) minus the thickness of the covering.
For example: thickness of wall covering 9/16" (15 mm)
2" (50 mm) - 9/16" (15 mm) = minimum safety distance 1 3/8" (35 mm).
a Wall frame
b Wall covering
x = thickness of the wall covering
c Countertop
d Countertop cut-out
e Minimum safety distance
with flammable materials 2" (50 mm)
with non-flammable materials 2" (50 mm) minus x
33
Installation
Installation dimensions
a Spring clips
b Appliance front
c Installation height
d Power supply box with connection cable
e Rating label
34
Installation
Cut out
^ Make the countertop cut-out for the
desired number of appliances.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the left or right of the
combiset.
See also the "IMPORTANT
INSTALLATION SAFETY
INSTRUCTIONS".
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum 3/16" (4 mm), can
be carefully filed down to fit.
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
35
Installation
Installation of multiple
appliances
When installing more than one combiset appliance, a support bar b must be
installed between the appliances.
Countertop cut-out
two appliances
Countertop cut-out
three appliances
For the installation of two appliances
the width of the countertop cut-out D is
the sum of A and C.
For the installation of three appliances
the width of the countertop cut-out D is
the sum of A and B and C.
A, B and C = appliance width
11 5/16", 15" or 22 11/16"
(288 mm, 380 mm or 576 mm)
minus 5/16" (8 mm) to allow for the
overhang
D = width of the countertop cut-out
36
If more than three appliances are
being installed, you will need to add,
A, B or C for each additional
appliance.
Installation
Sample calculations for a countertop cut-out for three appliances
A
appliance width
minus 5/16"
(8 mm)
B
appliance width
C
appliance width
minus 5/16"
(8 mm)
D
Countertop
cut-out
11" (280 mm)
11 5/16" (288 mm)
11" (280 mm)
33 3/8" (848 mm)
11" (280 mm)
15" (380 mm)
14 5/8" (372 mm)
40 5/8" (1032 mm)
11" (280 mm)
22 11/16" (576 mm)
22 3/8" (568 mm)
56 1/16" (1424 mm)
11" (280 mm)
37" (940 mm)
14 5/8" (372 mm)
44 1/4" (1124 mm)
14 5/8" (372 mm) 22 11/16" (576 mm)
22 3/8' (568 mm)
59 11/16" (1516 mm)
22 3/8" (568 mm) 11 5/16" (288 mm)
11" (280 mm)
44 3/4" (1136 mm)
14 5/8" (372 mm) 11 5/16" (288 mm)
14 5/8" (372 mm)
15" (380 mm)
22 3/8" (568 mm)
15" (380 mm)
14 5/8" (372 mm)
52" (1320 mm)
22 3/8" (568 mm)
-
22 3/8" (568 mm)
44 3/4" (1136 mm)
37
Installation
a Spring clips
b Support bars
c Space between support bar and countertop
d Cover
The illustration represents the attachment of spring clips a and support bars b
for 3 appliances.
An additional support bar is required for each additional appliance. The position
for attachment of an additional support bar depends on the width of appliance B.
38
Installation
Attach the spring clips and
support bars
Wood or solid surface countertops
^ Place the supplied spring clips a
and the support bars b at the
marked positions as shown above,
by laying them on the upper edge of
the cut-out and then securing them
with the 1/8" x 1" (3.5 x 25 mm) screws
(supplied).
39
Installation
Granite countertop
The screws are not needed for
granite countertops.
^ Coat the side and lower edges of the
spring clips between a and b with
silicone.
^ Position and attach the spring clips
a and support bars b with strong,
double-sided tape c.
40
^ Fill the space e between the support
bars b and the countertop with
silicone.
Installation
Installing the appliance(s)
^ Feed the power cord down through
the cut-out.
^ Place the front edge of the appliance
into the cut-out.
^ With a hand on each side of the
appliance press down evenly on the
edges until it clicks into position.
When doing so make sure that the
appliance seal sits tightly on the
countertop to ensure it is sealed
correctly. This is important to ensure
an effective seal. Do not permanently
seal into the countertop.
^ Place the front edge of the next
appliance into the cut-out.
^ Connect the appliance(s) to the main
power supply (see "Electrical
connection").
^ Turn the appliance(s) on and check
the function.
The appliance may be lifted out
using a special tool.
The appliance can also be pushed
up and out from underneath.
Note: push the rear out first.
^ Push the installed appliance to the
side until the holes in the support bar
are visible.
^ Insert the cover d into the holes in
the support bar b.
41
Installation
Sealing
Tiled surfaces
The appliance must not be
permanently sealed into the countertop
when installed. The sealing strip under
the edge of the appliance provides a
sufficient seal for the countertop.
The grouting a and shaded area under
the appliance frame must be flat and
even so that the frame will lie evenly
and the sealing strip under the edge of
the upper part of the appliance can
provide an adequate seal against the
countertop.
If the appliance is sealed into
position, the countertop or appliance
could be damaged if it needs to be
removed for maintenance or service.
42
Electrical connection
,CAUTION: Before installation or
servicing, disconnect the power
supply by either removing the fuse,
shutting off the main power or
manually "tripping" the circuit
breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the rating label correspond with the
household electrical supply. This
data must correspond to prevent
appliance damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into the
countertop.
Power supply
^ Be sure your electrical supply
matches the rating label.
The rating label is located on the
underside of the appliance.
The combiset is equipped with a power
cord encasing 3 wires ready for
connection to a grounded power
supply.
They must be connected to a
dedicated line through the use of an
approved junction box.
Black : connect to L1 (hot)
Red: connect to L2 (hot)
Green: connect to GND (ground):
208 - 240 V, 60 Hz, 20 A fuse rating
Be sure the power outlet is accessible
after installation.
For further information, see the wiring
diagram provided with the appliance.
, WARNING:
THIS APPLIANCE MUST BE
GROUNDED!
Installer:
Please leave these instructions with
the consumer.
43
Help protect our environment
Disposal of packing materials
Disposal of an old appliance
The cardboard box and packing
materials are biodegradable and
recyclable. Please recycle.
Old appliances contain materials that
can be recycled. Please contact your
local recycling authority about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
44
Before discarding an old appliance
disconnect it from the electrical supply
and cut off the power cord to prevent it
from becoming a hazard.
45
46
47
Alteration rights reserved / 3911
M.-Nr. 07 346 540 / 04
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.