DVR-150
DVD RECORDER
DVD + ReWritable
Safety Precautions
The lightning flash with an arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated” dangerous voltage” within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
theliterature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOTOPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOTREMOVE COVER (OR BACK).
NO USER-SERVICEABLE PART INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
WARNING:
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK
OF FIRE OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.ONLYQUALIFIED SERVICE
PERSONNELSHOULD ATTEMPTTHIS.
CAUTIN:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND
FULLY INSERT.
ATTENTION:
POUR EVITER LES CHOCS ELECTRLQUE, INTRODUIRE LALAME LARGE DE LA FICHE
DANS LABORNE CORRESPONDANTE DE LAPRISE ET POUSSER JUSQU'AU FOUD.
CAUTION:
This Digital Video Player employs a Laser System. To prevent direct exposure to the laser
beam, do not try to open the enclosure Visible laser radiation emits when open and
interlocks are defeated.
Use of controls or adjustments or procedures of procedures other than those specified
herein may result in hazardous radiation exposure.
DO NOT STAREINTO BEAM.
To ensure proper use of this product, please read this owner's manual carefully and retain
for future reference. Should the unit require maintenance, contact an authorized service
location, Only qualified service personnel should remove the cover.
CLASS 1
LASER PRODUCT
1
Since it is very usual for DVD movies to be released at different times in different regions of the world, all players have region codes and
disks can have an optional region code. If you load a disk of a different region code to your player, you will see the region code node
notice on the screen. The disk will not play, and should be unloaded.
Safety Information
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Please carefully study this manual and always keep it available. There are, however, some installation and operation precautions
which You should be aware of.
1.Read Instructions - All the safety and operating instructions should be read before the product is operated.
2.Retain Instructions - The safety and operating instructions should be retained for future reference.
3.Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4.Follow Instructions - All operating and use instructions should be followed.
5.Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6.Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7.Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8.Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
9.Aproduct and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
1 0. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the m a n u f a c t u r e r’s instructions have been adhered to.
11.Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate
from battery power, or other sources, refer to the operating instructions.
12.Grounding or Polarization This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way, This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
Alternate Warnings This product is equipped with a three-wire groundingtype plug, a plug having a third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature, If you are unable to
insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
13.Power-Cord Protection Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14.Protective Attachment Plug The product is equipped with an attachment
plug having overload protection. This is a safety feature. See instruction
Manual for replacement or resetting of protective device. If replacement of
the plug is required, be sure the service technician has used a replacement
plug specified by the manufacturer that has the same overload protection as
the original plug.
2
FIGURE A
EXAMPLE OF ANTENNAGROUNDING
AS PER NATIONALELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUD CLAMP
NEC-NA TIONALELECTRICAL CODE
S2898A
POWER SERVICE
GROUNDING ELECTRODE
SUSTEM
(NEC ART 250, PART H)
15.Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size or grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
16.Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to
lightning and powerline surges.
17.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as contact with them might be fatal.
1 8.Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire
or electric shock.
19.Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
20.Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
2 1.Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way, and
f. When the product exhibits a distinct change in performance - this indicates a need for service.
22.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer or have the same charateristics as the original part. Unauthorized substitutions may result in fire, electric shock,
or other hazards.
23.Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform saftey checks to
determine that the product is in proper operating condition.
24.Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
25. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
Introduction
Your DVR-150 Design combines the functionalities of a
DVD player and recorder. As a DVD player, you will be able
to enjoy full length movies with true cinema picture quality,
and stereo or multichannel sound (depending on the disc
and your playback system). Unique features of this player
include Scart & S-video outputs for greater
picture clarity.
What’s more, as a DVD Video Recorder, it has some of the
key features that allow you to record programs conveniently
such as:
• A complete DVD+RW/DVD+R recorder.
• Preset recording
• Playback of pre-recorded or user-recorded DVDs and CDs
• View, edit and play from a pre-recorded DVD+RW.
DIGITAL AUDIO
MP
DVD + ReWritable
DVD + R
UNPACKING
When shipping the player, the original shipping carton and packing comes in handy. For
maximum protection, re-pack the unit as it was originally packed at the factory. It is normal for
your changer tray to partially open after you have unpacked the unit. This is a feature designed
to allow easier access to disc inside the tray during diagnostics.
First check and identify the contents of your player package, as listed below:
- DVR-150
- Remote control
- RCA cables (3) x2 (1 yellow, 1 red, and 1 white)
- Owner’s manual
If any item should be damaged or missing, please inform your supplier without delay.
Keep the packaging materials as you may need them to transport your player in the future.
WHERE TO PLACE YOUR DVD RECORDER
1. Place the unit on a firm, flat surface.
2. When you place this player near a radio or VCR the playback picture may become poor and/or
distorted. In this situation, move the DVD video player away from the other units.
3. Keep away from direct sunlight & domestic heating equipment.
4. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free space around the player for
proper ventilation.
TO OBTAIN A CLEAR PICTURE
This player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are
dirty or worn down, the picture quality will become poor. To obtain a clear picture, we recommend
regular inspection and maintenance (i.e. cleaning or parts replacement) every 1,000 hours of use
depending on the operating Environment. For details, please contact your nearest dealer.
3
Table of Contents
Safety Precautions……………………..…1
Using the On-screen Display………………..22
Safety Information………………….…..…2
Setting the Parental Lock………………….…23
Introduction……………………………......3
Customizing DVD Function Settings….…..24
Table of Contents……………………..…...4
Recording Options…………………………….25
Identification of Controls…………..…....5
Channel Search……………………..…………..25
Connection……………………………….....7
Normal Recording…………………..………..…25
MP3……................................……........11
One-Touch Record………………….………..…26
Playing Back a Disc………………….......12
Time Record…………………………….....…….27
Playing a Normal Disc…………….…........12
Playing a DVD+RW or DVD+R Disc……...13
Editing……………………………………….…...28
General Features……………………....…..13
Editing a Title of DVD+RW………………..……28
Editing a Disc of DVD+RW or DVD+R……......31
Locating a Specific Title,
Chapter or Track…………………….........15
Specifications……………………………..……32
Playing Repeatedly……..……………......17
Trouble Shooting Guide…………………...….33
Playing in Random Order……………......18
Selecting Camera Angles, Languages
& Audio Settings………………….........….19
Playing in a favorite Order………..……...20
Selecting Subtitles…………………...…...21
4
Identification of Controls
FRONT PANEL
2
1
3
4
5
6
PLAY
STOP
SOURCE
STANDBY/ON
DVD + ReWritable
DV INPUT
7
L---- AUDIO -----R
VIDEO
9
8
OPEN/CLOSE
S-VIDEO
10
RECORD
11
1.STANDBY/ON
7.Digital Vidicon INPUT
2. OPEN/CLOSE
8.AUDIO INPUT (FRONT LEFT)
3.RECORD
9.AUDIO INPUT (FRONT RIGHT)
4.PLAY
10.COMPOSITE VIDEO INPUT(FRONT)
5.STOP
11.S-VIDEO INPUT(FRONT)
6.SOURCE
REAR PANEL
1
INPUT
IN
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
L
L
C
SL
VIDEO
L
Pb/Cb
Y
DIGITAL
OUTPUT
230V~50Hz
OUT
TV75
ANTENNA
2
S-VIDEO
3
4
R
5
R
SW
SR
MIXED
5.1CH
6
7
R
S-VIDEO
8 9
Pr/Cr
COAXIAL
13 10
OPTICAL
11
SCART OUTPUT
12
1. RF SIGNAL INPUT
7. 5.1CH AUDIO OUTPUT
2. RF SIGNAL OUTPUT
8. COMPOSITE VIDEO OUTPUT
3. COMPOSITE VIDEO INPUT(REAR)
9. S-VI DEO OUTPUT(REAR)
4.S-VIDEO INPUT
10. DIGITAL AUDIO-COAXIAL OUTPUT
5. AUDIO INPUT (REAR LEFT/RIGHT)
11. DIGITAL AUDIO- OPTICAL OUTPUT
6.AUDIO OUTPUT (MIXED)
12. SCART OUTPUT
13. COMPONENT OUTPUT
5
Identification of Contrils
REMOTE CONTROL
THE INSTRUCTIONS BELOW DESCRIBE THE
FUNCTIONS OF THE REMOTE CONTROL
23
1
OPEN/CLOSE
STANDBY/ON
24
2
3
1.
2.
3.
4.
5.
6.
OPEN/CLOSE
DV
TV
NUMBERS
SETUP
DIRECTION
(UP/DOWN/LEFT/RIGHT)
7. SELECT
8. MENU
9. TIMER
10.REC/OTR
(RECORD/ONE-TOUCH RECORD)
11.PLAY
12.STOP
13.REVERSE
14.PREVIOUS
15.FWD
16. NEXT
17.AUDIO
18.SUBTITLE
19.REPEAT
20.SLOW
21.PROG
22.RANDOM
23.STANDBY/ON
24.SCAN
25.AV(SOURCE)
26.NAVIGATION
27.ADD/CLEAR
28.TITLE
29.DISCOPER
30.EDIT
31. MUTE
32.PAUSE/STEP
33.VOLUME+
34.CHANNEL+
35.VOLUME36.CHANNEL37.RETURN
38.ANGEL
39.DISPLAY
40.ZOOM
41.GOTO
42.PS/IS(PROGRE SSIVE / INTERLACE SCAN)
6
DV
TV
AV
SCAN
1
2
3
4
5
6
7
8
9
25
4
ADD/CLEAR NAVIGATION
26
0
SETUP
TITLE
5
28
6
7
SELECT
MENU
DISC OPER
29
8
TIMER
REC/OTR
EDIT
30
9
10
27
PLAY
STOP
PAUSE/STEP
MUTE
31
/
11
32
12
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
33
13
14
15
34
35
16
36
AUDIO SUBTITLE ANGLE RETURN
37
17
18
REPEAT
SLOW
ZOOM DISPLAY
19
20
38
39
PROG
RANDOM
PS/IS
21
GOTO
40
41
22
42
DVD + ReWritable
Connection
CONNECTION FOR AUDIO OUTPUT
Dolby Pro Logic Surround Sound (GOOD)
Enjoy Dolby Pro Logic Surround by connecting
an amplifier and speaker system (right and left
front speakers, a center speaker, and one or
two rear speakers).
INPUT
IN
VIDEO
VIDEO OUTPUT
Pb/Cb
Y
DIGITAL
OUTPUT
S-VIDEO
Pr/Cr
COAXIAL
OPTICAL
AUDIO OUTPUT
VIDEO
L
S-VIDEO
R
L
C
R
SW
SL
L
OUT
TV75
ANTENNA
SR
R
5.1CH
MIXED
Audio cable
(Analog out)
SCART OUTPUT
AMPLIFIER
Enjoying Digital Stereo Sound (BETTER)
Enjoy the dynamic sound of Digital Stereo by
connecting an amplifier equipped with a digital
audio input and speaker system (right and left
front speakers, a center speaker, and one
subwoofer speaker, and two rear speakers)
INPUT
IN
VIDEO
VIDEO OUTPUT
Pb/Cb
Y
DIGITAL
OUTPUT
S-VIDEO
Pr/Cr
COAXIAL
OPTICAL
AUDIO OUTPUT
VIDEO
L
S-VIDEO
R
L
C
R
SW
SL
L
OUT
TV75
ANTENNA
MIXED
SR
5.1CH
R
Audio cable
AMPLIFIER
7
or
SCART OUTPUT
Connection
CONNECTION FOR VIDEO OUTPUT
GOOD
BETTER
INPUT
IN
VIDEO OUTPUT
AUDIO OUTPUT
L
VIDEO
L
C
SL
VIDEO
L
Pb/Cb
Y
DIGITAL
OUTPUT
INPUT
IN
VIDEO
VIDEO OUTPUT
Pb/Cb
Y
DIGITAL
OUTPUT
S-VIDEO
Pr/Cr
COAXIAL
OPTICAL
AUDIO OUTPUT
VIDEO
L
S-VIDEO
R
L
C
R
SW
SL
L
OUT
TV75
ANTENNA
OUT
R
S-VIDEO
R
SW
SR
R
5.1CH
MIXED
S-VIDEO
Pr/Cr
COAXIAL
OPTICAL
TV75
ANTENNA
SR
5.1CH
MIXED
COMPOSITE
VIDEO
R
S-VIDEO
Connect your recorder with the S-Video cable,
if the TV has an S-Video input. Do not connect the
yellow video cable of using the S-Video cable.
SCART RGB VIDEO OUTPUT (BEST)
The SCART Video OUTPUTput allows you to enjoy
the best picture quality from a DVD video disc.
AUDIO OUTPUT
L
C
SL
VIDEO OUTPUT
L
DIGITAL OUTPUT
R
MIXED
SW
SR
5.1CH
R
COAXIAL
OPTICAL
CONNECTION FOR TV TUNER
YOUR RECORDER
Signal Input
INPUT
IN
VIDEO
VIDEO OUTPUT
Pb/Cb
Y
DIGITAL
OUTPUT
S-VIDEO
Pr/Cr
COAXIAL
OPTICAL
AUDIO OUTPUT
VIDEO
L
S-VIDEO
R
L
C
R
SW
SL
L
OUT
TV75
ANTENNA
MIXED
SR
R
5.1CH
SCART OUTPUT
AUDIO Signal Output
NOTE
Refer to the manual of the connected TV.
Turn off the power and unplug both units before setting up any connections.
8
SCART OUTPUT
Connection
THE DVR-1000 ALLOWS YOU TO ENJOY OR RECORD PROGRAMS WITH SIGNAL FROM AV
SYSTEMS SUCH AS VCR, DVD PLAYER, ETC.
CONNECTION FOR AV SIGNAL (A/V REAR INPUT)
YOUR RECORDER
INPUT
IN
VIDEO
VIDEO OUTPUT
Pb/Cb
Y
DIGITAL
OUTPUT
S-VIDEO
Pr/Cr
COAXIAL
OPTICAL
AUDIO OUTPUT
VIDEO
L
S-VIDEO
R
L
C
R
SW
SL
L
OUT
TV75
ANTENNA
SR
R
5.1CH
MIXED
Audio out
Video in
SCART OUTPUT
Video out
Audio in
or
DVD player
TV set
Connect your recorder with the S-Video cable, if the Signal
Source has an S-Video input. Do not connect the yellow
video cable if using the S-Video cable.
NOTE
Refer to the manual of the connected system.
Turn off the power and unplug both units before setting up any connections.
9
Connection
CONNECTION FOR AV SIGNAL (A/V FRONT INPUT)
INPUT
RECORDER REAR
IN
VIDEO
VIDEO OUTPUT
Pb/Cb
Y
DIGITAL
OUTPUT
S-VIDEO
Pr/Cr
COAXIAL
OPTICAL
AUDIO OUTPUT
VIDEO
L
S-VIDEO
R
L
C
R
SW
SL
L
OUT
TV75
ANTENNA
MIXED
SR
5.1CH
Audio out
R
Video out
TV set
or
Audio in
Video in
RECORDER FRONT
STANDBY/ON
DVD + ReWritable
DV INPUT
L---- AUDIO -----R
VIDEO
S-VIDEO
OPEN/CLOSE
RECORD
PLAY
STOP
SOURCE
DV input
DIGITAL
Connect your recorder with the S-Video cable, if the Signal
Source has an S-Video input. Do not connect the yellow
video cable if using the S-Video cable.
Vidicon
NOTE
Refer to the manual of the connected system.
Turn off the power and unplug both units before setting up any connections.
10
MP3 & Progressive Scan
WHAT IS MP3?
MP3 refers to a new format of music files available for playback over the internet. The
popularity of MP3 allows people to download music from MP3 websites onto ones home
computer.
WHAT IS PROGRESSIVE SCAN?
Progressive Scan creates a picture with double the scan lines of traditional component video
pictures and creates a sharper image. The advantages of progressive scan video output are
reduced picture flickering and motion artifacts as well as a sharper image on large screens.
11
Playing Back a Disc
PLAYING A NORMAL DISC
1.Power on your recorder.
OPEN/CLOSE
OPEN/CLOSE
2.Insert a DVD disc.
DV
3.Press direction Keys or the number buttons to select
the title.
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
Title1
Title 2
0
SETUP
SELECT
SELECT
MENU
TIMER
PLAY
Title3
Title 4
TITLE
DISC OPER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
AUDIO SUBTITLE ANGLE RETURN
REPEAT
PROG
4 Press the SELECT or PLAY button.
The DVD video player will start playback from the title
selected.
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
5. To remove the disc, press the OPEN/CLOSE button.
PLAYING A DVD+RW OR DVD+R DISC
Index Picture Screen
1. TITLE
01/01/00
12:03:47
SP00:00:20
1. TITLE
01/01/00
12:06:50
HQ00:00:20
1. TITLE
01/01/00
12:08:57
SLP00:00:20
Description:
12
1.
2.
3.
4.
5.
1. TITLE
01/01/00
12:03:47
SP 00:00:20
1.The name of the pre-recorded. The default is TITLE.
2.The date and time of the record.
3.Title time of the record.
4.The quality.
5.Length of the record
Playing Back a Disc
PLAYING A DVD+RW OR DVD+R DISC
OPEN
CLOSE
1.Power on your reorder.
OPEN/CLOSE
2.Insert a DVD+RW or DVD+R disc
The index pictures will appear on the screen.
STANDBY/ON
TV
DV
2
3
4
5
6
8
9
ADD/CLEAR NAVIGATION
0
SETUP
SELECT
TITLE
SELECT
MENU
4.Use direction keys(UP/DOWN/RIGHT/LEFT) to highlight
the item you desired.
DISC OPER
TIMER
PLAY
5.Press SELECT or PLAY to start playback of the title you
selected.
SCAN
1
7
3.Press the OPEN/CLOSE button
This will open the disc tray and allow for the placement of a
playable disc with the playback side down.
AV
PLAY
STOP
6.Stop playback
Press the STOP button once to stop the player; press the
PLAY button to resume playing.
To playback from the start, press the STOP button twice then
press the PLAY button.
REC/OTR
STOP
PAUSE/STEP
UP/DOWN
/RIGHT/LEFT
EDIT
MUTE
/
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
AUDIO SUBTITLE ANGLE RETURN
REPEAT
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
Note:
After finishing playback of all titles contained on a
DVD+RW or DVD+R disc, it will return to the Index Picture
Screen.
DVD
MODE
TRICK
TITLE
CHAPTER
AUDIO
SUBTITLE
ANGLE
T-TIME
GENERAL FEATURES
All playback operation can be realized by the navigation.
During playback, press DISPLAY button twice to access
the control bar:
Normal
Play
35/41
01/01
01/02-OTH
Off
01/01
00:00:00-00:00:00
The details of every functions see below:
Press RIGHT/LEFT to highlight one icon and press SELECT to enter it, press UP/DOWN to
select a item, press SELECT.
Press DISPLAY again to cancel the control bar.
MODE
Normal
Playback mode Set your preferable playback
mode such as PROGRAM, RANDOM and
various repeat mode.
TRICK
Play
Playback control Control playback by various
setting such as FAST FORWARD, FAST
REVERSE, PAUSE, STOP, etc.
TITLE
35/41
Title Select to choose an available title by
inputting numbers.
CHAPTER 01/01
13
Chapter Select to choose an Available
chapter by inputting numbers.
AUDIO
01/02-OTH
Audio Select your desired audio setting, if
Available.
SUBTITLE Off
Subtitle Select to choose anavailable subtitle
by inputting Numbers.
ANGLE
01/01
Angle Select your desired camera angle, if
Available.
T-TIME
00:00:00-00:00:00
Timer Goto the point you want to start from
by inputting the time.
Playing Back a Disc
GENERAL FEATURES
1.Fast forward playback
Press during normal playback.
The speed will cycle with each press as: FF2, FF4,FF16,FF32 or
play.
Press PLAY to resume normal playback.
OPEN/CLOSE
DV
2.Fast reverse playback
Press
during normal playback.
The speed will cycle with each press as: FB2, FB4,FB16,FB32 or
play.
Press PLAY to resume normal playback.
STANDBY/ON
TV
AV
2
3
4
5
6
8
9
7
ADD/CLEAR NAVIGATION
ZOOM
0
SETUP
TITLE
SELECT
MENU
TIMER
3.Pause playback
Press PAUSE/STEP during normal playback to pause playback
and press PLAY to resume normal playback.
PLAY
DISC OPER
REC/OTR
STOP
PLAY
PRVERSE/
FORWARD
4.Frame advance
Press PAUSE/STEP during normal playback.
One frame is advanced each time you press PAUSE/STEP.
Press PLAY to resume normal playback.
PAUSE/STEP
Note:
The above features vary depending on the disc type such as MP3,
Audio CD, etc.
14
EDIT
MUTE
/
PAUSE/STEP
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
AUDIO SUBTITLE ANGLE RETURN
REPEAT
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
5.Slow
Press the SLOW button during plsyback
The playback speed becomes 1/2, 1/4, 1/8 of the normal speed
or normal play each time you press the SLOW button.
SCAN
1
Locating a Specific Title, Chapter or Track
DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES AND SUB-DIVIDED INTO CHAPTERS.
SIMILARLY, CD'S(AUDIO,HDCD, and MP3) ARE DIVIDED INTO TRACKS. YOU CAN CONVENIENTLY
LOCATE ANY SPECIFIC TITLE, CHAPTER,OR TRACK WITH THIS DVD PLAYER.
Chapter1
Chapter2
Chapter1
TITLE1
Chapter2
Chapter3
Track1
Track2
Track3
Track4
Track5
Audio CD
TITLE2
DVD Video Disc
LOCATING A TITLE USING THE TITLE MENU
You can locate a specific title using the title menu function, if a DVD video disc contains a title menu.
1.Press the TITLE button
On the TV screen, the title menu will appear.
TITLE
Title 1
Title 2
Title 3
Title 4
2.Press the / / / button to select the title you want
3.Press the SELECT button
This will cause the DVD video player to start playback from
chapter 1of the title selected.
Example of a title menu
SELECT
NOTICE
There are some disc that does not respond to this function.
If different instructions appear on the TV screen, follow those instructions. The instructions
above are describe the basic procedure, but procedures may vary depending on the contents of
the DVD video disc.
LOCATING A SPECIFIC CHAPTER OR TRACK
This player allows you to locate consecutive chapters or tracks.
Press the SKIP or
button repeatedly to display the requested chapter or track
The player starts playback from the selected chapter or track.
PREV NEXT
How to locate proceeding chapters or tracks
When you press the SKIP
button , the player starts playback from the beginning of the
preceding chapter or track.
How to locate succeeding chapters or tracks
When you press the SKIP button , the player starts playback from the beginning of the
succeeding chapter or track..
Notice: on some discs the titles may not display the sub-divided chapters.
15
Locating a Specific Title, Chapter or Track
LOCATING A TITLE
If a DVD video disc contains title numbers, you can locate a specific title by directly selecting
a title number.
1.Press GOTO during playback.
The control bar will display on the screen.
CHAPTER--TITLE:-TIME-: --:-2 To select your desired Chapter, input the number of a vailable chapter, then press
SELECT to confirm it.
OPEN/CLOSE
DV
e.g. To select Chapter2
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
CHAPTER- -2
0
SETUP
TITLE
SELECT
SELECT
MENU
TIMER
DISC OPER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
AUDIO SUBTITLE ANGLE RETURN
REPEAT
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
3 To select your desired title, press GOTO to highlight the icon
and input the number of a vailable title, then press SELECT.
TITLE:--
4.If you want to start playback from some point, press GOTO to highlight the icon
TIME-: --:-- ,and input the time, then press SELECT.
Note:
The function is invalid on MP3 disc.
For CD disc, GOTO is used for track/time selection.
16
GOTO
Playing Repeatedly
THIS RECORDER ALL ALLOWS YOU TO PLAYBACK A SPECIFIC TITLE, CHAPTER, TRACK, OR
SEGMENT REPEATEDLY.(TITLE REPEAT, CHAPTER/TRACK REPEAT,A-B REPEAT)
HOW TO REPEAT A TITLE, CHAPTER, OR TRACK
1.Press the REPEAT button during playback.
The repeat mode changes, each time you press the REPEAT
Button.
OPEN/CLOSE
DV
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
C-RPT
0
Repeats the same chapter.
SETUP
TITLE
SELECT
MENU
TIMER
T-RPT
Repeats the same title.
DISC OPER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
D-RPT
Repeats the whole disc.
AUDIO SUBTITLE ANGLE RETURN
REPEAT
NORMAL
REPEAT
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
Resumes normal playback.
DVD + ReWritable
HOW TO REPEAT A SPECIFIC SEGMNET
1
Press DISPLAY button twice to access the control bar.
2
Highlight
MODE Mormal
by pressing RIGHT/LEFT, press SELECT.
3 Use UP/DOWN to select A-B Repeat and press SELECT at the beginning of the
segment in which you want to repeat playback(point A).
4.Press SELECT again at the end of the segment( point B)
The player will automatically return to point A and
Start to repeat playback to the selected segment(A-B)
5.Highlight MODE A-B Repeat
by pressing RIGHT/LEFT, press SELECT.
Use UP/DOWN to select NORMAL and press SELECT to resume normal playback.
Note:
There are two repeat modes for MP3/CD disc. On CD disc, they are track repeat
and disc repeat, and on MP3 disc, they are repeat song and repeat directory.
17
DVD
MODE
TRICK
TITLE
CHAPTER
AUDIO
SUBTITLE
ANGLE
T-TIME
Normal
Play
35/41
01/01
01/02-OTH
Off
01/01
00:00:00-00:00:00
Normal
A-B Repeat
Chapter Repeat
Title-Repeat
Disc Repeat
Playing in Random Order
THIS RECORDER ALLOWS YOU TO PLAYBACK TITLES, CHAPTERS WITHIN A TITLE, OR TRACKS
IN RANDOM ORDER.
PLAYING TITLES IN RANDOM ORDER
1. During normal playback press the RANDAM button.
The player will start random playback now.
OPEN/CLOSE
DV
Random
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
0
SETUP
Normal
TITLE
SELECT
MENU
TIMER
DISC OPER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
2. Press RANDOM again to resume normal playback.
AUDIO SUBTITLE ANGLE RETURN
REPEAT
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
RANDOM
DVD + ReWritable
Note:
• The player will go to another chapter or track and start playback, if you press the SKIP button
18
,
, during random playback.
Selecting Camera Angles, Languages & Audio Settings
THIS RECORDER ALLOWS YOU TO SELECT FROM SEVERAL DIFFERENT ANGLES AND
LANGUAGES.
AUDIO :01/03 GER DOLBY
ANGEL1
ANGEL2
AUDIO :02/03 ENG DOLBY
OPEN/CLOSE
AUDIO :03/03 CHI DOLBY
Selecting the camera angle
Selecting a language
DV
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
0
HOW TO CHANGE THE CAMERA ANGLE
SETUP
If the video on the DVD was recorded with multiple angles, you have the
option to change the camera angle of the scene you are watching.
TITLE
SELECT
MENU
TIMER
DISC OPER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
Press the ANGLE button while playing back a scene recorded with
multiple angles.
AUDIO SUBTITLE ANGLE RETURN
REPEAT
• You may only press the ANGLE button when the angle icon
is shown on the DVD display.
ANGEL :01/03
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
• Each time you press the ANGLE button, the angle will change.
ANGEL :01/03
ANGEL :02/03
ANGEL :03/03
Note:
• The angle function will not work on DVD video discs that does not contains recorded multiple angles.
• During still playback, you are able to change the camera angle. When you resume to normal playback, the camera angle
changes to the new settings.
• The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded from multiple angles.
HOW TO SELECT A LANGUAGE & PLAYBACK AUDIO SETTING
This player allows you to select a preferred language and sound recording system from those
included on the DVD video disc.
AUDIO :01/03 GER DOLBY
1. Press the AUDIO button during playback
AUDIO :02/03 ENG DOLBY
2. Press the AUDIO button repeatedly to
cycle through the options
AUDIO :03/03 CHI DOLBY
Note:
• The player returns to the initial default settings when you turn on the player or replace a disc.
• The player plays a default sound when unsupported format is selected.
• On MP3/CD disc, AUDIO is used for the selection of LEFT, RIGHT and STEREO.
19
Playing in a Favorite Order
THIS PLAYER ALLOWS YOU TO PROGRAM UP TO 99 ITEMS INTO MEMORY AND THEN PLAY THEM
BACK IN THAT ORDER. (PROGRAM/PLAYBACK)
HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVORITE ORDER
1. Press DISPLAY button twice to access the control bar.
2. Highlight
MODE
Normal
by pressing RIGHT/LEFT, press SELECT.
3. Use UP/DOWN to select PROGRAM and press SELECT, two volumes
will appear on the screen.
• The left volume displays all titles available on the disc.
Edit program play list
OPEN/CLOSE
DV
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
0
TITLE
TITLE 01
TITLE 02
Favorite/Program
SETUP
TITLE
SELECT
TITLE 02 Chapter 01
TITLE 04 Chapter 01
TITLE 03
TITLE 04
TITLE 05
TITLE 06
TITLE 07
MENU
TIMER
DISC OPER
REC/OTR
STOP
PAUSE/STEP
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
AUDIO SUBTITLE ANGLE RETURN
REPEAT
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
TITLE 08
DVD + ReWritable
• The right volume allows you to edit titles in your favorite order.
2. In the left volume, use UP/DOWN to select one title, and press
ADD/CLEAR to add it to the right volume.
You can also select one chapter by pressing SELECT after highlighting
the title.
3. To clear one title you have added in the right volume, highlight
the one and then press ADD/CLEAR to clear it. Use RIGHT/LEFT to
move the cursor between the volumes.
4. Press PROG to return the PROGRAM play back.
5.Press DISCPLAY button twice to access the control bar
Select MODE Program
use UP/DOWN to select NORMAL and press SELECT to
resume normal playback.
20
MUTE
/
PROG
Note:
• On the MP3/CD disc, there are some difference on OSD.
EDIT
PLAY
Selecting Subtitles
THIS RECORDER ALLOWS YOU TO DISPLAY THE SUBTITLES FROM THOSE INCLUDED ON THE
DISC ON TO YOUR TV SCREEN.
Good afternoon
Bonsoir
Buenas tardes
HOW TO DISPLAY SUBTITLES
Press the SUBTITLE button during playback to choose
one of the subtitle available on the disc, or turn the
subtitle off.
OPEN/CLOSE
DV
SUBTITLE :01/07 ENG
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
0
SETUP
SUBTITLE :02/07 GER
TITLE
SELECT
MENU
TIMER
SUBTITLE :03/07 SPA
DISC OPER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
SUBTITLE :04/07 FRE
SUBTITLE :05/07 CHI
SUBTITLE :06/07 HUN
SUBTITLE :07/07 HIN
SUBTITLE
AUDIO SUBTITLE ANGLE RETURN
REPEAT
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
OFF
Note:
• Due to the nature of some DVD’s, you may not be able to turn off the subtitles as they will appear on
screen automatically.
• As you press the SUBTITLE button, the subtitles may not appear immediately during some scenes.
• If the subtitles continue to show on your TV even after the DVD has been turned off, please check the closed
caption settings on your TV.
21
Using the On-Screen Display
THIS PLAYER ALLOWS YOU TO VIEW STATUS AND DISC INFORMATION ON YOUR TV SCREEN.
CHECKING THE OPERATIONAL STATUS
With this function, you can view on your TV the following information:
-Play back status
- Current title
- Current chapter
-Current language
-Current title Time
Press DISPLAY button during DVD playback.
OPEN/CLOSE
DV
STANDBY/ON
TV
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
0
SETUP
TITLE
SELECT
MENU
TIMER
Normal Play T01/25 C06/21 AU01/03 00:26:48
DISC OPER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
PLAY BACK STATUS
AUDIO SUBTITLE ANGLE RETURN
Normal Play T01/25 C06/21 AU01/03 00:26:48
REPEAT
PROG
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
CURRENT TITLE/TOTAL TITLE
DVD + ReWritable
Normal Play T01/25 C06/21 AU01/03 00:26:48
CURRENT CHAPTER/TOTAL CHAPTER
Normal Play T01/25 C06/21 AU01/03 00:26:48
CURRENT LANGUAGE
Normal Play T01/25 C06/21 AU01/03 00:26:48
CURRENT TITLE TIME
22
DISPLAY
Setting the Parental Lock
YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD’S EQUIPPED WITH THE
PARENTAL LOCK FEATURE
OPEN/CLOSE
STANDBY/ON
TV
DV
SETTING THE PARENTAL LOCK
DVD equipped with the parental lock function are rated according to
their content. The contents allowed by a parental lock level and the
way a DVD can be controlled may vary from disc to disc. For
example, if the disc allows it, you could edit out violent scenes
unsuitable for children and replace them with more suitable scenes,
or lock out playback of the disc all together.
AV
SCAN
3
1
2
4
5
6
7
8
9
ADD/CLEAR NAVIGATION
0
SETUP
TITLE
SETUP
SELECT
MENU
DISC OPER
TIMER
REC/OTR
EDIT
PLAY
STOP
PAUSE/STEP
MUTE
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
/
AUDIO SUBTITLE ANGLE RETURN
SLOW
REPEAT
PROG
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
1. Press STOP button twice during playback.
2. Press SETUP during stop status.
3. Highlight the PLAY icon by pressing
RIGHT/LEFT.
The menu appears on the TV screen.
6. Press SELECT , the sub-menu of Set Rating
Level appears, use UP/DOWN to select one rating,
press SELECT to confirm it.
SYSTEM SETUP - PLAYBACK
OFF
OK
NEW
SYSTEM SETUP - PLAYBACK
TV aspect ratio
Pan Scan
Rating level
OFF
Digital audio output
RAW
Closed captions
OFF
1 Kid Sate
2G
3 PG
4 PG 13
5 PG-R
6R
7 NC-17
8 Adult
OFF
7. Highlight OK and press SELECT to save your
setting.
8. Press SETUP button to exit setup,
press PLAY button to start
TO CHANGE YOUR PASSWORD:
4. Use UP/DOWN to select Rating Level, press
SELECT button.
5. Input your password by numbers, highlight
OK and press SELECT.
The pre-set password is 3308
23
1.
2.
3.
5.
6.
Follow step 1-6 to select “New”.
Enter new password.
Re-enter to confirm your new password.
Highlight OK and press SELECT to save it.
Press SETUP button to exit.
Customizing Function Settings
THIS PLAYER ALLOWS YOU TO CUSTOMIZE THE PERFORMANCE TO YOUR PERSONAL
PREFERENCES.
SETUP MENU
GENGERAL
PLAYBACK
RECORD
LANGUAGE
CHANNEL SCAN
CLOCK
DISPLAYING THE SETUP MENU SCREEN
The SETUP MENU screen asks you to select a setting category from General, Speaker, Audio and
Preferences. The selected category will provide you the setting details using the succeeding screen.
Main Page
General Setup
On/Off
CVBS/RGB
screen saver
GENGERAL
Scart output
Video output format
PAL/NTSC
Restore factory settings
OK
Playback Setup
16:9/Pan Scan/Letter box
Off
TV aspect ratio
PLAYBACK
Rating level
Digital audio output
RAM/LPCM
Closed captions
ON/OFF
Record Setup
RECORD
Default source
On/Off
F-CS/ F-SV/ RE-CS / RE-SV/ DV/TUNER
Default quality
SLP/EP/SP/HQ
Audio chapter market
Language Setup
LANGUAGE
OSD language
English/Spanish/......
Menu language
English/Chinese/....../Original
Off/English/Chinese/......./Original
English/Chinese/......./Original
Subtle language
Audio language
CHANNEL
SCAN
Deltails see page 25
Date& Time Setup
CLOCK
Date(mm/dd/yy)
Time(hh:mm:ss)
1. Press SETUP during stop
status.
2. Press direction keys
(UP/DOWN/RIGHT/LEFT) to
select category (highlight),
then press SELECT.
3. Press SETUP to exit the
setup menu.
24
01/01/00
01:15:01
Recording Options
CHANNEL SEARCH
To record TV programs, you should search TV channels first.
SYSTEM SETUP - CHANNEL SCAN
1. Press SCAN to access the TV setup menu.
2. Use the UP/DOWN button to highlight SCAN
and press SELECT.
It will search channels automatically.
During auto-searching, press STOP to cancel
searching.
3. To browse the found channels, use the UP/
DOWN button to highlight EDIT and press
SELECT to setup it, press UP/DOWN to Name,
and you can also input numbers and press SELECT.
In the SKIP column, The channel cannot be found
will be “YES”.
4. If you want to skip one channel, select the
corresponding channel. use UP/DOWN button
to highlight the skip and press SELECT, press
UP/DOWN to highlight the yes, and press SELECT,
5.use UP/DOWN to highlight the OK and press SELECT.
Scan channels
SCAN
Modify channel information
EDIT
Sort channel order
SORT
3%
Total found 1 channel. Press STOP to
stop scanning
CHANNEL EDIT
Name
Dh002
Frequency
55.25MHz
Sound mode
PAL I
Fine tune
Skip
YES
OK
LEFT/RIGHT to manual scan, 0~9 or
CH+/CH- to Change Channel
6. Press SETUP again to exit.
SETUP RECORD QUALITY
1. Press SETUP during stop status.
2. Press direction keys (UP/DOW/R) to select.
3. Select default quality.
HQ: Perfect quality, nearly 60 minutes in a blank disc
SP: Standard play quality, nearly 120 minutes in a blank disc
EP: Extend play, nearly 240 minutes in a blank disc
SLP: Standard long play, nearly 360 minutes in a blank disc
NORMAL RECORDING
1. Make connections illustrated as page8 -10.
2. Insert a recordable DVD+RW or DVD+R into the recorder.
3. Press DV. TV or AV to select the input source which you have connected as step 1.
F-A/V: Front Audio/Video Input (on the front panel)
R-A/V: Rear Audio/Video Input (on the rear panel)
F-SV: Front S-Video (on the front panel)
R-SV: Rear S-Video (on the rear panel)
TV: (you can select it by pressing CHANNEL+/- or input the assigned number of the
channel to select your desired one directly)
DV: Digital vidicon
4. Press RECORD to start recording.
If you want to stop recording, press STOP.
If the DVD+RW or DVD+R is new, it will take about three minutes to stop.
25
Recording Options
ONE-TOUCH RECORD
1. During normal recording, press RECORD, the recorder will auto stop in 30 minutes.
2. The record time will extend for another 30 minutes with each press.
The length of recording time is determined by disc capacity and record quality.
With your setting, if it will exceed the capacity of the disc, OTR will be canceled, and switched to normal
record.
3. If you want to stop recording, press STOP.
HOW TO SWITCH TO PLAYBAK MODE
When the recording is suspended, you can press PLAY to switch to normal playback mode.
CLOCK SETUP
1. During stop status, press SETUP to access the Setup Menu.
2. Use RIGHT/LEFT to highlight the CLOCK icon as the
right figure.
3. With “Date (mm/dd/yy)” highlighted, press SELECT,
and input the local date by numbers, press SELECT
again.
4. With “Time (hh:mm:ss)” highlighted, press SELECT,
and input the local time by numbers, press SELECT again.
Note:
If you want to cancel input, press RETURN.
26
SYSTEM SETUP - CLOCK
Date(mm/dd/yy)
0 1/0 1/0 0
Time(hh:mm:ss)
1 4/2 9/5 2
Recording Options
TIMER RECORD
1.First setup the clock of your system as “CLOCK SETUP” on page 26.
It is recommended to setup your local date and time.
OPEN/CLOSE
2.Press TIMER, the record scheduler will pop up.
W
W
W
1
2
3
4
DV
Rear CVBS
Ch057
SP
SP
HQ
SCAN
3
2
4
5
6
7
8
9
0
SETUP
SELECT
Quality
AV
1
ADD/CLEAR NAVIGATION
Record scheduler
Source
STANDBY/ON
TV
DV
TITLE
SELECT
MENU
Date
Start
12/01/03 14:41
DAILY 07:03
12/31/03 12:44
End
TIMER
STOP
15:11
08:33
13:05
DISC OPER
TIMER
REC/OTR
STOP
PLAY
PAUSE/STEP
EDIT
MUTE
/
REV
PREV
CH+
VOL+
FWD
NEXT
CH-
VOL-
AUDIO SUBTITLE ANGLE RETURN
REPEAT
PROG
5
6
SLOW
RANDOM
ZOOM
DISPLAY
PS/IS
GOTO
DVD + ReWritable
Note:
If you want to delete a scheule, highlight the one, press ADD/CLEAR.
2.Use UP/DOWN to select one schedule, and press SELECT to access Item Editor as below:
In each item you can also use direction keys to highlight and press SELECT to choose your
desired setting:
Item Editor
Signal input source, details see page 25,step 3.
Record frequency, once, daily or weekly.
Mm/dd/yy
Start time for timer recording
End time for timer recording
Sorce
ONCE
Start
End
Quality
DV
0 1/ 0 1 /0 0
14:41
15:11
SP
Record quality, details see
page 25 setup record quality.
Confirm
Cancel
3.Select Confirm to save your setting.
4.In five minutes before it is ready to record the scheduled, it appears a Record Prompt dialog,
affirm press Confirm, abolish press CANCEL, and if without operation for a moment it will
record the scheduled automatically.
Note:
In standby mode, your recorder can wake up in 2 minutes before recording.
During recording, you can press STOP to suspend the recording.
A DVD+RW/DVD+R can record for upto 360 minutes.
27
Editing
EDITING A TITLE OF DVD+RW
1.Insert a recorded DVD+RW on the disc tray.
The Index Picture screen pops up.
View current title/total title
2.Use the direction keys to highlight the title
which you want to edit.
View current chapter/total
chapter
3.Press EDIT, the edit bar appears on the
screen while playing back.
Press RIGHT/LEFT to highlight one icon and
enter it, press UP/DOWN to select a sub-item.
Title:04/04
Chapter:01/01
Current operation status
PLAY
Chapter editing Select to add one
chapter, or delete the current/all
chapters, details see the next page.
EDIT MODE
Title:04/04
Chapter:01/01
PLAY
Chapter marker
Hide chapter
Index picture
Split title
Chapter marker
Chapter hide or unhide Select to
hide the current chapter,, details
see the next page
Hide chapter
Title face or Title name Select to
set the current image played back to
the face of the title or select to name
the current title, details see the next
page.
Index picture
T- Elapsed: 0:00:02
Divide current to 2 titles at current
point
Split title
Title Timer
T- Elapsed: 0:00:02
4.Press EDIT to quit the menu.
28
Editing
CHAPTER EDITING
From the control bar, select the fourth icon, press SELECT repeatedly, it will cycle as
following:
Chapter marker
Insert marker
Delete marker
Delete all markers
When Insert marker
to the current point.
is selected by pressing SELECT, a new chapter marker will be added
Delete
When
will be deleted.
marker is selected by pressing SELECT, the marker of the current chapter
When Delete
be deleted.
all markers
is selected by pressing SELECT, all of the chapter markers will
Note:
From the second icon in the control bar, the above operation can be viewed.
If only one chapter is available in the current title, there is only Insert marker to select.
CHAPTER HIDE OR UNHIDE
From the control bar, select the fifth icon, press SELECT.
Hide chapter
When the icon displays
can select it to hide it by pressing SELECT.
, it shows the current chapter is visible, and you
Unhide chapter , it shows the current chapter is invisible, and you
When the icon displays
can select it to unhide it by pressing SELECT.
29
Editing
TITLE ICON AND SPLIT TITLE
From the control bar, select the sixth icon, press SELECT .
When you want to set the current frame as the icon of the current title which miniature picture will
appear in the Index Picture Screen, Press SELECT with
Indes picture displayed.
From the control bar, select the seventh icon, press SELECT .
When
is selected by pressing SELECT, a new title marker will be added
Split title
to the current point.
EDIT TITLE NAME
1.Insert a recorded DVD+RW on the disc tray.
The Index Picture screen pops up.
2.Use the direction keys to highlight the title which you want to edit.
3.Press RIGHT, the edit bar appears on the screen while playing back.
Press UP/DOWN to highlight one icon and SELECT it.
4.From the control bar, select the fourth icon, press SELECT .
On the screen, there appears a keyboard:
Play title
Erase title
Edit title
Rename title
Overwrite title
Overwrite disc
Title name
TITLE_
A B C D E F G H I J K 0 1 2
L M N O P Q R S T U V 3 4 5
W X Y Z ( ) _ : ? . 6 7 8 9
Space Caps BkSp Delete Clear
Exit
OK
Press the direction keys (UP/DOWN/RIGHT/LEFT) to highlight the one which you want to input, and
press SELECT to confirm it.
The control bars of the last line in the keyboard is for edit command.
Select OK to save the name.
Note:
The maximum length of the title name is up to 9 characters.
30
Editing
EDITING A DISC OF A DVD+RW
1.Insert a DVD+RW on the disc tray.
2.Press DISC OPER to access the disc editing menu.
3. With each icon highlighted by pressing UP/DOWN,
the corresponding description of each operation will
display on the screen, such as Erase disc, Rename
disc, Record a new title, Overwrite disc, etc.
4. Press SELECT to run the operation.
Play
Erase disc
Rename disc
Make compatible
Record a new title
Overwrite disc
Lock disc
Finalize disc
EDITING A DISC OF A DVD+RW OR DVD+R
Play
Press SELECT to playback from the disc.
Erase disc
ERASE (only DVD+RW )
Press SELECT to begin erasing.
Rename disc
Press the direction keys (UP/DOWN/RIGHT/LEFT) to
highlight the one which you want to input, and press
SELECT to confirm it.
The control bars of the last line in the keyboard is for
edit command. Select OK to save the name.
Note:
The maximum length of the title name is up to
9 characters.
Disc name
W_
A B C D E F G H I J K 0 1 2
L M N O P Q R S T U V 3 4 5
W X Y Z ( ) _ : ? . 6 7 8 9
Space Caps BkSp Delete Clear
Exit
OK
Make compatible
compatible (only DVD+RW)
It shows you can make your current disc compatible. If you want to make your disc compatible
with the other DVD player. You should go on COMPATIBLE operation.
Lock disc
LOCK(only DVD+RW )
When the icon display LOCK, it shows you can lock your current disc. If you have locked
Your disc, you can't make any changes any more except play it back, but you can unlock
it by UNLOCK.
Finalize disc
Finalize (only DVD+R)
31
Highligh the icon and press SELECT. It will take a few minutes to finalize the disc.
Note:
If a DVD+R has been finalized, you can not record or edit DVD+R any more. If you want
to make your disc compatible with the other DVD player, you should go on FINALIZE
operation.
Specifications
DVD Player
TV System
Compatible Discs
NTSC/PAL
DVD+R, DVD, CD, Mp3,
DVD+RW,CD-R, CD-RW
DVD+RW, DVR-R
Recordable discs format
Resolution Ratio
Greater Than 500 lines
Video S/N Ratio
65dB
Frequency Response
fs (96KHz/24bit)
4Hz - 44KHz:+/-2dB
Audio S/N Ratio
95dB
Degree of Distortion
<0.01%
D/A Converter
192KHz/24bit
Video Out
1Vp-p
S-Video Out
Y: 1Vp-p(75 )
C: 0.3Vp-p(75 );
Audio Out
2.0V
5.1 Channel,2Channel mixed
Digital Audio Output
Connections
32
Optical, Coaxial
YUV, SCART, CVBS
S-Video
Remote Control
Transmitter
Signal Range
Power Source
General
Power Supply
Consumed Power
Standby Power
Size (WxHxD)
Infrared Ray
Approximately 15'
2 " AAA " Batteries
AC 95~240V 50/60Hz
30W
<3W
Because its products are subject to continuous
improvement, We reserves the right to modify
product design and/or specifications without
notice and without incurring any obligations.
Trouble shooting Guide
Check the following guide for a possible correction to a problem
before contacting customer service.
SYMPTOMS AND CORRECTION
Correction
Symptom
No power
Connect the power plug into the wall outlet securely.
No picture
Verify the connection from the DVD video output to the TV video input. Then
Switch TV to appropriate mode(video 1)
Connect the video cable into the jacks securely. Refer to your television
owners manual.
No sound
Connect the audio cables into the jacks securely.
Verify the connection from the DVD audio output to the TV or receiver audio
input. Then switch to the appropriate source on the receiver. Refer to your
Audio amplifier owners manual.
Black & White
picture
The playback
picture Has
occasional distortion
Damaged S connector (bent pin)
A small amount of picture distortion may appear because of a poor quality
video/sound transfer to disc. This is especially true of some discs
Manufactured between 1997-1998.
Scratched disc
Brightness is
unstable or noises
are produced on
playback pictures
Connect the DVD player directly through the TV and not through any other
source. What you're viewing is the effect of the copy protection circuitry
Required on all DVD players.
If you don't have a video input on your TV, you must purchase an Therefore
Adapter from your dealer.
The DVD video
player does not start
playback
Place the disc with the graphics side up.
Place the disc on the disc tray correctly inside the guide.
Make sure the disc is free from scratches & fingerprints.
Press the SETUP button to turn off the menu screen.
Cancel the parental lock function or change the parental lock level. (The
Pre-set password is 3308.)
Turn the power off then disconnect the power plug and reinsert it back into
the wall. Retry again.
Use region 1 discs only.
MP3 won't read disc
or It skips
Return disc as the software edition used may not be compatible with the
player. Check web site for instruction.
Use new editions of software such as Voyetra Audiostation 4, Adaptec's
“Easy CD Creator”, NTI or Roxio's Toast Titanium.
Make sure MP3 file are not encoded with a variable bit rate such as
provided by Real Networks.
33
The remote control
does not work
Properly
Replace the batteries with new ones.
The recorder cannot
record.
The
The
The
The
Some keys do not
work
The type of the disc is wrong, it's not a DVD+RW or DVD+R disc.
The unit is in record mode or it is recording.
The image is
distorted.
The setup of interlaced or Progressive is wrong.
Press the I/P button to switch from each other.
type of the disc is wrong, it's not a DVD+RW or DVD+R disc.
disc is recorded full.
disc (DVD+R,DVD+RW) is locked, it should be unlocked.
DVD+R has been finilized.
DVD + ReWritable
Manufactured under license from Dolby Laboratories."Dolby",
"Pro Logic"and the double-D symbol are trademarks of Dolby
Laboratories.Confidential Unpublished Works.
Dolby Laboratories,Inc.all rights reserved.
C 1992-1997