VIORE LC32VH60 Owner`s manual

32" HD LCD Television
LC32VH60
AIR (TV)/CABLE
MODE SELECTION
The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory.
If you want to use an antenna for the built-in TV tuner, this menu option must be set to the
"Air" mode. Please refer to page 16 of the owner's manual for the details of this menu.
Contents
Contents
Caution
Safety Information
2
3
Unit and Accessories
Product Feature
4
4
Introduction
1. Front View
2. Rear View
3. Remote Control
5-8
5
6
7-8
Basic Operation
9-10
OSD Menu
1. Picture menu
2. Audio menu
3. Time menu
11-17
11
12
13
14
15
16-17
4. Setup menu
5. Lock menu
6. Channel menu
Simple
Troubleshooting
18
Technical Specifications
19
Instruction
20
for Wall Mount
VIORE Limited Warranty
21
CaH_oH
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated "dangerous
voltage" within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
\
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their endof-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live
in_
c@s
This unit complies
with America
Safety directives.
This unit complies
with FCC directives.
Intertek
Sajety Information
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully
instructions in this user guide, especially the safety information below.
Electrical
all the
safety
• The TV set should only be connected to a mains supply which matches that stated on
the label on the mains adaptor
• To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
-Do not place any connecting wires where they may be stepped on or tripped over.
-Do not place heavy items on the leads, which may damage them.
-Hold the Mains plug, not the wires, when removing from a socket.
-During a thunderstorm
or while leaving the TV for long periods, disconnect the aerial (if
outdoor) and mains adaptor from the supply.
-Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if:
-the mains plug or cable is damaged
-liquid is spilt onto the set, or if it is accidentally exposed to water or moisture
-anything accidentally penetrates the ventilation slots
-the set does not work normally.
-Do NOT remove the safety covers. There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service this
apparatus.
-To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
-Do NOT break open or throw exhausted batteries on a fire.
Physical safety
• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet, but
ensure at least 5cm (2") clearance all around the unit.
• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
Unit and Accessories
and Product
Feature
Unit and Accessories
TV set
User's Manual
User's manual
Remote control
Batteries: 2xAAA
AC Power Cable
Product Feature
• Integrated ATSC TV tuner for HDTV broadcast
• Three HDMI input for true digital connections
• VGA port for connection to PC
reception
4
Introduction
Introduction
1. Front View
+_0
o
_0
_o
ao
"u
su
,!,
Power Indicator
Remote Control window
(Keep clear)
1). (IR) Infrared Receiver:
(Power on/Standby)LED
Indicator
Indicator
on(Red)
on(Green)
Receives
IR signals from the remote control.
Indicator: Press Power Button to turn on and off.
Standby mode
Power on mode
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 300 to the left or right side and 200 above or below the remote control
window.
2). The functions of the buttons:
INPUT:Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
POWER: Turn on/standby the TV set.
8
Introduction
2. Rear View
iiil
_ _ i_ i
m
POWE_W
TC H
AC
POWE
RJN
1). AC POWER IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the Power Cable.
2). POWER SWITCH: Switch on or off the power supply.
3). HDMII/2/3:
Connect them to the video output terminal of the external device.
4). VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector
5). PC AUDIO IN: Connect it to the audio output terminal of PC.
6). YPbPrI/2
: Connect them to the video output terminal of the external device.
Audio L/R in 1/2 : Connect them to audio output terminal of the external
7). VIDEO : Connect it to video output terminal of the external device.
Audio
L/R in : Connect
them to audio output terminal
of the external
device.
device.
8). COAX: Digital coaxial output.
9). RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
lO).Service:
USB port for service.
Power on
To turn on the LCD TV
"
,
i
Press _
on theLCDTVto
_
first.
",
- . -
Be sure to turn off the power and unplug both units from the wall outlet before making
6
'Power off
any connections.
of the PC.
Introduction
3. Remote Control
The remote control is usin9 Infra-Red(IR).
Point it towards the front of the LCD TV. The remote
control may not work correctly if it is operated out of range or out of angle.
Introduction
Installing Batteries
1. Open the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment.
Don't mix different types or used batteries with new ones.
3. Close the cover.
,_
Batteries
shall not be exposed
- The remote control should be operated
IR receive at the front of the LCD TV.
- Used batteries
should be disposed
to excessive
heat such as sunshine
within 30 feet(7m)
properly.
I
or fire.
and 30 o to the left and right of the
Basic
Operation
Basic Operation
Power on/off
1. Connect to an earth 100-240V, 50/60Hz AC outlet with the Power Cable.
2.-To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display the input
source menu, and use CH+/- button on the TV set or A / V button on
remote control to select the input source,
remote control to enter.
Note: Before
connections
you select the input
are prepared.
Basic buttons
on the remote
press OK button on the
source,
make sure the
control
POWER(red button): Turn the TV on/standby.
INPUT: Press to display the input source menu.
Number Buttons:
Choose channel directly.
Select channel 5, Press button "5";
Select channel 62, Press button "6", then press button "2" in 2 seconds;
Select channel 151, Press button "1", and press button "5" in 2 seconds, and press button "1" in
2 seconds;
Select channel 5-1, Press button "5", and press button "- / - -" in 2 seconds, and press button "1"
in 2 seconds;
C_-_ (RETURN):
Return to the previous
channel viewed.
PICTURE: Press repeatedly to cycle through the available video picture modes.
SOUND: Press to cycle through the different sound settings.
SLEEP: Shutdown timer.
DISPLAY: Display the information of current mode.
VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
MUTE: Press to mute the sound, press again or press VOL+ to unmute.
MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.
Thumbstick(<
> A V ): Allows
settings to your preference.
OK: CONFIRM button.
you to navigate
the on-screen
9
menus and adjust the system
Basic Operadon
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
r ................................................
Use < / > button to select the main menu, and press V button to enter the submenu.
In the submenu, use A / V button to select the function item, and you could:
adjust ("Contrast" item in Picture menu for example) with < / > button;
select ("Picture Mode" item in Picture menu for example) with < / > button;
enter the submenu ("Close Caption" item in Setup menu for example) with > button.
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
10
OSD Menu
OSD Menu
1. Picture
menu
Picture mode: Select between Standard, Dynamic, Mild, Sports, Userand Power Saving.
You may select the picture mode directly by pressing the PICTURE button on the remote
control.
Note: when select the "Power Saving',
the machine is in energy-saving
status.
Contrast:
Control the difference between the bright and dark regions of the screen picture.
Brightness:
Adjust brightness of the picture.
Color: Adjust color of the picture.
Tint: Control the fresh tones to make them appear natural.
Sharpness:
Set the amount of fine detail in the picture.
Color Temp.: Select between Normal, Cool and Warm.
11
OSD Menu
2. Audio menu
Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User
You may select the sound mode directly by pressing the SOUND button on the remote
control.
Bass: Low frequencies intensity.
Treble: High frequencies intensity.
Balance: Left and right stereo audio channels balance.
Surround:
Activate or deactivate the Surround function.
SPDIF Type:
Audio
Select the spdif type.
Language:
Select audio language.
12
OSD Menu
3. Time menu
Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes,
deactivate this function.
Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain.
Daylight Saving Time: Select between On and Off.
Clock: User can not change time manually in ATSC mode, for time is from signal source
directly.
13
or
OSD Menu
4. Setup menu
Menu Language: Select
Transparency:
Turn on
Zoom Mode: Select the
4:3, 4:3 zoom.
Noise reduction:
Select
Strong,
OSD menu language.
or off the transparency menu function.
zoom mode between 16:9, 16:9 zoom,
the noise reduction
mode between
Off, Weak and Middle.
PC SETUP: If the video input signal comes from your PC, you may
adjust the H-Position, V-Position, Clock, Phase or even
perform an Auto adjustment.
Closed Caption:
CC Mode: Allow you to select the CC Mode among: On, Off and
CC on Mute.
Basic
Selection:
Allow you to select the basic selection among:
CC1, CC2, CC3, CC4, Text1, Text2, Text3 and Text4.
Advanced
Selection:
Allow you to select the advanced selection
among: Service1, Service2, Service3 Service4, Service 5 and
Service 6.
Option: Use thumbstick buttons to
operating in option menu as your
desire.
XVS: Activate / deactivate the automatic dynamic brightness function.
Restore Default: Restore all settings in SETUP menu to factory settings.
14
OSD Menu
5. Lock menu
You must enter the password
You may modify the following
to gain access
options:
to the Lock menu. The default
password
is 0000.
Change password:
Change the password, you must enter the new password twice to confirm
it. Note: Do not forget the password.
System Lock:Allow
you to turn on or off the system lock. If deactivated, the functions described
below don't work.
This option menu allows you to lock any TV channel or adjust the Movie rating filter.
US:
TV: Use/k / V buttons to select the desired
> button to block or unblock rating.
rating and press
MPAA: The Movie rating (MPAA) is used
for original movies rated by the Motion
Picture Association of America (MPAA)
as broadcasted on cable TV and not
edited for television.
RATNG
DESCR RT_ON
G
General
PG
Pa_'ea_l G#ida_c4_ SL 0gested
Aud ences. Movie
s appropriate
no_ se[ed f_:_r
younger qe,,vors.
RG...13
Con_.a i s oo/_e_]_ fl_a[ #lay n0t _
appropriate
f_4tqe_,_s
urger
If_
_ae of 13,
R
Restricted,
Use/k / V button to select N/A, G,
PG, PG-13, R, NC-17 or X.
Co_
_s adJ}t c£_ea¢, no ol>e _r_Ser 17 _lm _ed "withr:>u_
N_ on_ 17 ar_ _er
X
Aduls
adm
_ed.
Ony,
Canada:
Canada Enqlish:
Canada French:
18ans+.
f_* a! ages.
May co#_a # #r_te#_
Select among: E, C, C8+, G, PG, 14+ and 18+.
Select among: E, G, 8ans+, 13ans+, 16ans+ and
Reset RRT: Allow you to reset the RRT setting.
15
OSD Menu
6. Channel
menu
Air/Cable: Allow you to select antenna between Air and Cable.
If you selet "Cable", the following items(Favorite,
Show/Hide,
and DTV Signal) are unable to use.
Auto Scan: Enter the Auto Scan menu to start auto scan.
Channel
NO, Channel
-k If you select "Cable" as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.
Use V button to highlight the "Start to Scan", then press >
button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
If you select "Air" as input signal in Antenna item, you _
can press > button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC orATSC
mode, please wait patiently.
Favorite:
Allow you to add these channels
which you desired as the favorite
Use/_ / V button to highlight the desired item, then press
OK button to add or remove the highlighted channel as
favorite.
16
channels.
Label
OSD Menu
Show/Hide:
Allow you to show or hide the channels.
Use A / V button to highlight the desired
OK button to show or hide the highlighted
Channel
item, then press
channel.
No.: Show and select the channel.
Channel Label: Allow you to setup a label for the channel.
Press < / > button to select the position of the table, and press A / V button to select the
words.
DTV Signal:
Show the quality of digital signal: good, Normal,
17
Bad.
Simple
Troubleshooting
Simple Troubleshooting
If the display fails or performance dramatically deteriorates check the Display in accordance
with the following instructions.Remember
to check the peripherals topinpiont the source of the
failure.
If the display still fails to perform as expected,connect
No power
- Check all connections
your helpline for assistance.
to the TV.
- Press either the power button or the Standby
button on the Remote control.
No picture or sound
- Ensure that the TV is plugged in and the power is on.
- Ensure that the aerial is connected.
- Try a different
programme.
Poor picture quality
- Check the aerial connections.
- Check that the channel is tuned in properly.
- Adjust the picture settings:brightness,colour,
sharpness,contrast,hue.
- Make sure that the TV is not located close to electrical appliances
frequency interference.
that may emit radio
No colour
- Adjust the colour setting.
- Check that the programme is broadcast in colour.
- Check that the cannel is tuned properly.
TV does not respond to remote control
- Check that there are no obstructions between
the remote control and the unit.
- Check that the remote control is within range of the unit.
- Check that the batteries in the remote control and not weak or exhausted.
This LCD TV is for household use and registered as harmless
Therefor, you can use it in every location as well as residential
18
on electromagnetic
areas.
waves.
Technical
Specifications
Technical Specifications
LCD Panel
BROADCAST
ANTENNA
Panel Size
32" (measured
Brightness
500cd/m 2
Dynamic Contrast Ratio
10000:1
SIGNAL SYSTEM
diagonally)
TFT LCD
NTSC=M ÷ ATSC
INPUT IMPEDANCE
75C_
SOUND OUTPUT
8Wx2
Max. Resolution
1366 x 768
VIDEO
1
YPbPr
2
AUDIO (L/R)
3
PC/AUDIO
1
HDMI
3
RF
1
Input Connector
SPDIF
Output Connector
Power Source
AC 100-240V_,
Power Consumption
180W
* Product specifications
and appearance
50/60HZ
are subject to change
19
without
notice.
INSTRUCTION FOR WALL MOUNT
The wall mount kit (not included) with your purchase allows you to mount your
VIORE TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. VIORE is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.
VESA Dimensions
I
for Wall Mount
300mm
I
--O
O
200mm
I
--O
[----']
O
IIIIIIIHIIIIIIIIIHIIIIIIIIIIIIIIIIHIIHIIIIHIIIIIIIIII
III111111111111111111111111111111111111111111111111111111111111
C][
This VIORE TV is Compliant
300mm x 200mm.
1
with the VESA Standard
mounting hole pattern
4 pcs of type M5 screws are required for installing the wall mount bracket to
your VlORE TV. Do not use screws that are longer than 10 mm. Screws that
are too long may cause damage to the inside of the TV set.
Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. VlORE is not liable for these kinds of
incidents
-
Do not mount your VIORE TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
-
Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
20
VIORE
TM
COMMERCIAL
LIMITED WARRANTY
FLAT PANEL TELEVISION
This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the
original purchaser
is warranted by VIORE against manufacturing defects in materials and workmanship for a
limited warranty period of two (2) years on parts and labor. This Limited Warranty does not apply to store display
products and product sold as a "marked down" special, in "as is" condition, "close out", "liquidation sale", "open
box", products missing accessories, no fault found or damaged at time of delivery to Viore.
Proof of purchase within two years from date of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice
is evidence the Product is within the limited warranty period. The Bill of Sale, Receipt or Receipted Invoice must be
presented as a pre-condition to obtaining the limited warranty service.
This limited warranty begins on the original date of purchase, and is valid only on Products purchased through
VIORE authorized dealers and used in the United States, Canada, and Puerto Rico by the original purchaser. To
receive warranty service, the purchaser must contact VIORE for problem determination and service procedures.
Warranty service may only be performed by a duly authorized VIORE service center. The original dated bill of sale,
receipt or receipted invoice must be presented upon request as proof of purchase to VIORE or VIORE's authorized
service center.
VIORE will repair or if
defective as specified
remanufactured
parts
Products become the
assume the remaining
repairs cannot be made, VIORE will replace this Product at no charge if the Product is
in this limited warranty during the limited warranty period. VIORE may use new or
or products to repair or replace the Product at its sole discretion. All replaced parts and
property of VIORE and must be returned to VIORE. Replacement parts and Products
original limited warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and
except to the extent otherwise expressly provided for in this statement, commercial use of this product, and shall
not apply to the following, including, but not limited to: Damage which occurs in shipment; delivery and installation;
applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage
or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external
wiring or connectors not supplied or authorized by VIORE which damage this product or result in service problems;
incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating
instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the
instruction book; reception problems and distortion related to noise, echo, interference or other signal transmission
and delivery problems; burned-in images. VIORE does not warrant uninterrupted or error-free operation of the
product.
THERE ARE NO EXPRESS OR IMPLIED WARRANTIES
OTHER THAN THOSE LISTED AND DESCRIBED
ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES
OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL
APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION
WITH RESPECT TO THIS
PRODUCT SHALL BE BINDING ON VIORE. REPAIR OR REPLACEMENT
AS PROVIDED UNDER THIS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VIORE SHALL NOT BE LIABLE
FOR ANY INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT; EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY
IMPLIED WARRANTY OF MERCHANTIBILITY
OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS
PRODUCT IS LIMITED FOR THE DURATION OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY
SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE
AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you. Any provision
contained herein which is found contrary to state or local laws shall be deemed null and void and the remaining
provisions shall continue in full force and effect.
To obtain warranty
service, please contact VIORE at:
Phone:
1-877-777-1428(USA
/ Puerto Rico)
1-877-777-1429(Canada)
WWW.Viore.com
Ver. 091120
Printed in China
21
VIORE, Inc.
7801 Hayvenhurst Avenue, Van Nuys, California 91406
Printed in China