Operating and installation instructions Induction wok CS 1223

Operating and installation instructions
Induction wok
CS 1223
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
en - GB
M.-Nr. 07 180 670
Contents
Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Induction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
The induction principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Suitable pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Auto heat-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Booster function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Safety switch-off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Overheating protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2
Contents
Safety instructions for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Appliance and building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Preparing the worktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installation of several appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Fixing the spring clamps and spacer bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
General installation tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
After sales service, data plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3
Guide to the appliance
a Wok basin (C 300 mm)
rating:
2400 W
with Booster: 3200 W
e Display
ß
No wok on cooking zone,
or wok unsuitable
b Wok
A
Auto heat-up
c Control knob
F
Fault
(see "Problem solving guide")
C/0
Safety switch off
(see "Safety features")
I
Booster in operation
H
Overheating protection
(see "Safety features")
L
Safety lock
(see "Safety features")
d Indicators
Indicators
f In-operation indicator
g Booster indicator
h Residual heat indicator
4
Guide to the appliance
Accessories supplied
The wok supplied with your CombiSet appliance as well as a
range of optional accessories are available to order (see
"Optional accessories").
Wok
5
Warning and Safety instructions
Correct application
This appliance is built in accordance
with current safety requirements.
Improper use of the appliance can,
however, present a risk of both
personal injury and material
damage.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on the installation,
safety, operation and care of the
appliance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
6
~ This appliance is intended for
domestic use only and must be used as
described in these instructions.
Any other usage is at the owner's risk
and could be dangerous. The
manufacturer cannot be held liable for
damage resulting from incorrect or
improper use or operation.
~ This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless they
are supervised whilst using it, or have
been given instruction concerning its
use by a person responsible for their
safety.
Warning and Safety instructions
Safety with children
~ Activate the safety lock to ensure
that children cannot switch on the
induction hob inadvertently.
~ This appliance is not a toy! To avoid
the risk of injury keep children well
away and do not let them play with it or
use the controls. They will not
understand the potential dangers
posed by it. They should be supervised
whenever you are working in the
kitchen.
~ Take care that children are not able
to pull the wok down off the appliance.
Turn the wok handle inwards away from
the edge of the appliance. Danger of
burning or scalding.
~ Packaging, e.g. cling film,
polystyrene and plastic wrappings,
must be kept out of the reach of babies
and young children. Danger of
suffocation. Dispose of or recycle all
packaging safely as soon as possible.
~ Older children may only use the
induction wok when its operation has
been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
~ The induction wok heats up and
remains hot for quite a while after it has
been switched off. To safeguard
against burning, keep children well
away from the appliance at all times.
~ Do not store anything which might
arouse a child's interest in storage
areas above or next to the appliance.
Otherwise they could be tempted into
climbing onto the appliance with the
risk of burning themselves.
7
Warning and Safety instructions
Technical safety
~ Installation, maintenance and
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
~ Before installation, check the
appliance for visible signs of damage.
Under no circumstances should you
use it if it has been damaged. A
damaged appliance is dangerous.
~ Do not use the induction wok if the
ceramic surface is cracked, chipped or
damaged in any way. Switch it off immediately, and disconnect it from the
mains electricity supply. Danger of
electric shock.
~ The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with local and national safety
regulations. It is most important that this
basic safety requirement is present and
regularly tested, and where there is any
doubt, the household wiring system
should be inspected by a qualified
electrician. The manufacturer cannot be
held liable for the consequences of an
inadequate earthing system (e.g.
electric shock).
8
~ Before connecting the appliance to
the mains supply, make sure that the
rating on the data plate corresponds to
the voltage and frequency of the
household supply.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
~ Do not connect the appliance to the
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
~ For safety reasons, this appliance
may only be used when it has been
built in.
~ This appliance may be connected
via a fused plug and switched socket. If
you wish to connect it to an isolator
switch, or if the appliance is supplied
without a plug, it must be installed and
connected by a suitably qualified and
competent person in strict accordance
with current local and national safety
regulations. The manufacturer cannot
be held liable for damage caused by
incorrect installation or connection.
~ If the connection cable is damaged,
it must be replaced by a suitably
qualified electrician with a special
connection cable of type H 05 V V-F
(pvc insulated), available from the Miele
Service Department.
Warning and Safety instructions
~ Never open the casing. Tampering
with electrical connections or
components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
~ While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
~ During installation, maintenance and
repair work, the appliance must be
disconnected from the mains electricity
supply. It is only completely isolated
from the electricity supply when:
– the mains fuse is disconnected,
– the screw-out fuse is removed (in
countries where this is applicable),
~ Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
~ To avoid the risk of damage to the
electrical cable ensure that is installed
in such a way that it cannot touch any
parts of the appliance which become
hot.
~ In countries where there are areas
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage caused by cockroaches or
other vermin will not be covered by the
guarantee.
– it is switched off at the wall socket
and the plug is withdrawn from the
socket, or it is switched off at the
isolator.
9
Warning and Safety instructions
Correct use
For people fitted with a heart
pacemaker:
Please note that the area immediately
surrounding the appliance is
electromagnetically charged, and that
this could affect a pacemaker.
If in any doubt consult the manufacturer
of the pacemaker or your doctor.
~ Only use the wok supplied with the
appliance. For safety reasons, other
woks should not be used: fire hazard.
See "Operation - pans"
~ The appliance gets hot when in use
and remains hot for quite a while after
being switched off. There is a danger of
burning until the residual heat indicator
goes out.
~ For added protection, it is advisable
to use heat-resistant pot holders or
gloves when using the appliance. Do
not let them get damp or wet, as this
causes heat to transfer through the
material more quickly with the risk of
scalding or burning yourself.
~ This appliance must not be set up or
operated in the open air.
~ When using an electric socket near
the appliance, care should be taken
that the cable of the electrical
appliance does not come into contact
with the hot appliance. The insulation
on the cable could become damaged,
giving rise to an electric shock hazard.
10
~ Do not cover the appliance, e.g.
with a cloth, kitchen foil, etc. This could
be a fire hazard if the appliance is
switched on by mistake.
~ Do not leave the appliance
unattended whilst it is in use.
A wok that has boiled dry can cause
damage to the ceramic surface for
which the manufacturer cannot be held
liable.
Boiling fat or oil could ignite and cause
a fire.
~ If, despite this, oil or fat does catch
fire, do not attempt to put out the flames
with water. Use a suitable fire blanket,
saucepan lid, damp towel or similar to
smother the flames.
~ Do not flambé under a cooker hood.
The flames could set the cooker hood
on fire.
~ To prevent damage to items which
are susceptible to magnetic fields, e.g.
credit cards, diskettes, pocket
calculators etc, do not leave them in the
immediate vicinity of the hob.
~ Spray canisters, aerosols and other
inflammable substances should not be
stored in a drawer under the hob.
Cutlery inserts must be heat-resistant.
~ Do not drop anything on the ceramic
surface. Even a light object could
cause damage in certain
circumstances.
Warning and Safety instructions
~ Keep the appliance clean. Grains of
salt, sugar and sand (e.g. from
cleaning vegetables) can cause
scratches.
~ Do not allow either solid or liquid
sugar, or pieces of plastic or aluminium
foil to get onto the induction hob when it
is hot. If this should occur, switch off
the appliance, and carefully scrape off
all the sugar, plastic or aluminium
residues from the surface whilst they
are still hot, using a shielded scraper
blade. Take care not to burn yourself.
If residues are allowed to cool before
being removed, the ceramic surface
will be susceptible to pitting or even
cracking.
Once the residues have been removed,
allow the appliance to cool down, and
then clean with a suitable proprietary
ceramic hob cleaner.
~ To prevent the risk of spillages etc.
burning on, remove any soiling as
quickly as possible and ensure that the
base of the wok is clean, dry and free
of grease.
~ If a drawer is fitted directly
underneath the appliance, ensure that
there is sufficient space between the
drawer and its contents and the
underside of the appliance in order to
ensure sufficient ventilation for the
appliance.
~ Do not use the appliance as a
resting place for anything else. Take
particular care never to place cutlery or
other metal objects on the appliance.
When the appliance is switched on
either deliberately or by mistake, or
when there is residual heat present,
there is the risk of metal objects heating
up, with a danger of burning.
Depending on the material, other
objects left on the appliance could also
melt or catch fire.
Switch the appliance off after use.
~ Always ensure that food is
sufficiently cooked or reheated. Many
factors will affect the overall cooking
time, including the size and quantity of
the food and its temperature.
Some foods may contain
micro-organisms which are only
destroyed by thorough cooking at a
sufficiently high temperature for long
enough. Therefore, when cooking or
reheating food such as poultry, it is
particularly important that the food is
completely cooked through. If in doubt,
select a longer cooking or reheating
time.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
11
Caring for the environment
Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and can normally be
recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
Rather than just throwing these
materials away, please ensure they are
recycled.
Please dispose of it at your local
community waste collection/recycling
centre or contact your Dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
It should be disconnected from the
mains electricity supply by a competent
person.
12
Before using for the first time
Please stick the extra data plate for the
appliance supplied with this
documentation in the space provided in
the "After sales service" section of this
booklet.
Cleaning for the first time
^ Remove any protective wrapping and
sticky labels.
^ Before using for the first time, clean
the appliance with a damp cloth only
and then wipe dry.
Do not use washing up liquid to
clean the ceramic surface as it can
leave a blue sheen which may be
difficult to remove.
Before using for the first time
When the induction wok is first
connected, and after a power cut, all of
the indicators in the display light up for
approx. 1 second for testing purposes.
The appliance can be used as soon as
the indicators go out.
Metal components have a protective
coating which may give off a slight
smell when heated up for the first
time. The smell and any vapours do
not indicate a faulty connection or
appliance, and they are not harmful
to health.
13
Induction
The induction principle
An induction coil is located underneath
the induction wok. When the appliance
is switched on, this coil creates a
magnetic field. This magnetic field in
turn creates, or induces, current in the
base of the wok on it. This heats up the
base of the wok. The wok basin itself is
heated up indirectly by the heat given
off by the wok pan.
The appliance only works when the wok
supplied is used (see "Suitable pans").
Induction heating does not work...
– if it is switched on without the wok in
place.
– if the wok is removed from the
appliance whilst it is switched on.
If this happens, ß will flash in the
display.
If the wok is replaced within 3 minutes,
the ß symbol will go out and you can
continue as normal.
If the wok is not replaced, the induction
wok will switch off automatically after 3
minutes. 0 and C flash alternately in the
display.
To use the induction wok again, first
turn the control to "0".
14
Take particular care never to place
cutlery or other metal objects on the
appliance. When the appliance is
switched on either deliberately or by
mistake, or when there is residual
heat present, there is the risk of
metal items heating up with the
danger of burning.
Switch the appliance off after use.
Induction
Noises
Suitable pans
The following noises might occur when
the induction wok is in operation:
Only use the wok supplied with the
appliance for cooking food.
This wok is designed specifically for the
appliance.
– On the higher power settings, it
might buzz. This will decrease or
cease altogether when the power
setting is reduced.
– You might hear a clicking sound from
the electronic switches, especially on
lower settings.
,If other woks are used, there is a
risk of fat or food overheating, and
burning.
The appliance has a cooling fan to help
extend the life of the electronics. When
the hob is being used intensively, this
will come on and you will hear a
whirring sound. The fan may continue
to run after the appliance has been
switched off.
15
Operation
Switching on and off
Residual heat indicator
The induction wok is switched on by
turning the control clockwise a to the
power setting required, and is switched
off by turning the control anticlockwise
b to "0".
The residual heat indicator remains on
until the induction wok is cool enough
to touch.
Do not touch or place any heat
sensitive objects on the induction
wok while the residual heat display
is still on.
Danger of burning.
Do not turn the control to "0" by
turning it past BI.
When the induction wok is switched on,
the in-operation indicator lights up.
Once it has reached a certain
temperature, the residual heat indicator
also lights up.
After the appliance has been switched
off, the in-operation indicator goes out.
16
Operation
Settings
Cooking process
Settings
Keeping food warm,
melting chocolate
1-2
Warming food up
3-6
Stir-frying, e.g. Chinese
dishes
7- 9
Auto heat-up
Continued
cooking setting
Heat-up time
in minutes and
seconds (approx.)
1
0 : 15
2
0 : 15
3
0 : 25
4
0 : 50
5
2 : 00
6
5 : 50
7
2 : 50
8
2 : 50
9
-
When Auto heat-up has been activated,
the induction wok switches on
automatically at the highest setting and
then switches to the continued cooking
setting selected. The heat-up time
depends on which continued cooking
setting has been chosen (see chart).
Taking the wok off the zone whilst Auto
heat-up is in operation interrupts the
Auto heat-up. It will resume if the wok is
placed back on the appliance within 3
minutes.
Activating Auto heat-up
^ Turn the control anticlockwise as far
as it will go, and hold in that position
until A appears in the display.
^ Turn the control clockwise to the
continued cooking setting required.
The continued cooking setting can be
changed during the first 10 seconds
after Auto heat-up has been activated;
after that, it cannot be changed.
Changing the continued cooking
setting after 10 seconds deactivates
Auto heat-up.
An A lights up in the display during the
Auto heat-up phase.
17
Operation
Booster function
To switch on the booster function
The induction wok is equipped with a
booster function which increases the
power level.
If activated, the appliance will operate
on power setting 9 with an extra boost
of power for a period of 10 minutes.
^ Turn the control past power setting 9
to BI, and then back to 9.
Taking the wok off the appliance whilst
the Booster is in operation interrupts the
Booster. It will resume if the wok is
placed back on the appliance within 3
minutes.
I appears in the display, and the B
indicator also lights up.
After 10 minutes the appliance will
automatically switch down to power
setting 9, and the B indicator and the I
symbol in the display goes out.
To switch off the booster function
The booster function can be cancelled
early.
If the wok reaches its maximum
permitted temperature before
10 minutes is up, the booster
function switches off and the
appliance resumes at power setting
9.
Only the wok supplied has this
safety feature, which ensures that
the appliance switches off when it
gets too hot.
18
^ Turn the control past power setting 9
to BI; or reduce the power setting.
Safety features
Lock
To deactivate the system lock
The induction wok is fitted with a safety
lock to prevent unauthorised use, e.g.
by children.
^ Turn the control anticlockwise as far
as it will go, and hold in that position
until the L goes out, and 0 appears
briefly in the display.
To activate the lock
^ Turn the control anticlockwise as far
as it will go, and hold in that position
until L appears in the display.
Every time the control is touched after
this, an L will show in the display for 3
seconds.
19
Safety features
Safety switch-off
The induction wok is fitted with a safety
switch-off feature in case you forget to
switch it off yourself.
If the induction hob is heated for an
unusually long period of time (see
chart), and the power setting is not
altered, it will switch itself off
automatically.
C and 0 will flash alternately in the
display.
To use the induction wok again, first
turn the control to "0". The indicator light
and the display will go out.
20
Power setting
Maximum
operating time in
hours
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
Safety features
Overheating protection
The induction coil can overheat if
The induction coil is equipped with
overheating protection. Before the
induction coil gets too hot, overheating
protection cuts in in one of the following
ways:
– the appliance is used for too long at
maximum power.
– If the booster function is being used
it will be switched off.
– If the temperature continues to rise
after the booster function is switched
off, the power setting will be
reduced.
– If the temperature continues to rise
after the power setting has been
reduced, the induction wok will
switch off and H will appear in the
display.
– the appliance is not well enough
ventilated.
If a drawer is fitted directly underneath
the hob, there must be sufficient space
between the drawer and its contents
and the underside of the appliance in
order to ensure sufficient ventilation for
the induction wok.
If the overheating protection device
trips again, contact the Service
department.
^ Turn the control to "0".
The induction wok can only be used
again in the normal way after the H has
gone out.
If the control is not turned back to "0", C
and 0 will flash in the display alternately
once the induction wok has cooled
down sufficiently. To use the induction
wok again, first turn the control to "0".
21
Cleaning and care
Miele offer a range of branded cleaning
and conditioning products. See
"Optional accessories".
,Under no circumstances use a
steam cleaning appliance to clean
this appliance . The steam could
attack the electrical components
and cause a short circuit.
Pressurised steam could also cause
permanent damage to the surface
and to other components, for which
the manufacturer cannot accept
liability.
The appliance should be cleaned after
each use. Let it cool down to room
temperature.
To avoid water marks and limescale
deposits, use a soft cloth to dry
surfaces that have been cleaned with
water.
To avoid damaging the surface of
your appliance, do not use:
– cleaning agents containing soda,
alaklines, ammonia, acids or
chlorides,
– cleaning agents containing
descaling agents,
– stain or rust removers,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents,
– sharp pointed objects
(these can damage the seal between
the frame and the worktop).
22
Cleaning and care
Ceramic surface
Stainless steel
Remove light soiling with a damp cloth.
The ceramic and stainless steel hob
cleaner can be used to clean the frame
when required (see "Optional
accessories"). Apply with an even
pressure following the direction of the
"grain".
Then clean the appliance with a
suitable ceramic and stainless steel
hob cleaner (see "Optional
accessories") applied with kitchen
paper or a clean cloth. Do not apply
cleaner whilst the appliance is still hot,
as this could result in marking. Please
follow the manufacturer's instructions.
Finally, wipe the appliance with a damp
cloth, then polish with a soft, dry cloth.
Ensure that all cleaner residues are
removed. Residues can burn onto the
appliance the next time it is used, and
cause damage to the ceramic surface.
Spots caused by limescale, water and
aluminium residues (spots with a
metalic appearance) can be removed
using the ceramic and stainless steel
hob cleaner.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel is
recommended (see "Optional
accessories").
Apply sparingly with a soft cloth.
Do not use stainless steel cleaning
agents on printed surfaces. This
would rub off the print. These areas
should be only cleaned with an
E-Cloth or with a solution of warm
water and a little washing-up liquid
applied with a soft sponge.
Should any sugar, plastic or
aluminium foil spill or fall onto the hot
appliance while it is in use, first switch
off the appliance. Then immediately,
while the surface is still hot, use a
shielded scraper blade to scrape off
the sugar, plastic or aluminium foil,
taking care not to burn yourself.
Allow the appliance to cool down, and
then clean as described above with a
suitable proprietary ceramic and
stainless steel hob cleaner.
23
Problem solving guide
,Installation work and repairs to
electrical appliances must only be
carried out by a suitably qualified
and competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK). Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if...
... the induction hob does not heat up
Check whether
– the safety lock is activated.
If necessary, deactivate it (see
"Safety lock").
– the mains fuse has blown.
– the overheating protection
mechanism has been triggered (see
section "Protection from
overheating").
If none of the above is the case, then
turn the control to "0", and disconnect
the appliance from the electricity
supply for approx. 1 minute.
Reset the trip switch in the mains fuse
box, and switch the appliance back on.
If it still will not switch on, contact a
qualified electrician or the Miele Service
Department.
24
... ß appears in the display
Check whether the empty appliance
has been left switched on inadvertently.
... F and 01 flash alternately in the
display.
Check whether the control is damaged
or stuck.
If this is not the case, call the Miele
Service Dept.
... F and a number flash alternately in
the display.
Call the Service Department.
... the induction wok switches off
automatically.
The safety switch-off feature or the
overheating protection mechanism has
been triggered (see "Safety switch-off"
and "Overheating protection").
Problem solving guide
... one of the following has occurred:
– The booster has automatically
switched off early.
– C and 0 flash alternately in the
display.
The overheating protection mechanism
has been triggered (see "Overheating
protection").
... The cooling fan continues to run
after the appliance has been
switched off
This is not a fault. The fan will continue
running until the appliance has cooled
down. It will then switch itself off
automatically.
... the food in the wok hardly heats
up or does not heat up at all when
the Auto heat-up function is switched
on
This might be because a large quantity
of food is being cooked.
Select a higher continued cooking
setting.
25
Optional accessories
Miele branded cleaning and conditioning products are
available for your appliance.
These can be ordered via the internet at
www.miele-shop.com or from the Miele Customer Service
Department (see back cover) or from your Miele dealer.
Wok
Wok lid
Other accessories
Ceramic and stainless steel hob cleaner 250 ml
Removes heavy soiling, limescale deposits and aluminium
residues
Stainless steel conditioning agent 250 ml
Removes water marks, flecks and finger prints.
Helps keep the appliance looking good for longer.
E-Cloth (microfibre cloth)
Removes finger marks and light soiling.
26
Safety instructions for installation
Fit the wall units and extractor hood
before fitting the appliance to avoid
damaging the surface.
~ The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~ This appliance may only be used in
mobile installations such as ships if a
risk assessment of the installation has
been carried out by a suitably qualified
engineer.
~ This appliance must not be installed
over a dishwasher, washing machine,
tumble dryer, refrigerator or freezer.
The high temperatures radiated by
hobs could damage the appliance
below.
~ Spray canisters, aerosols and other
inflammable substances should not be
stored in a drawer under the hob.
Cutlery inserts must be heat-resistant.
All dimensions in this instruction booklet
are given in mm.
~ After installation, ensure that the
connection cable is without hindrance
and that there is no mechanical
obstruction which could damage it,
such as a drawer.
~ If an interim shelf is installed under
the appliance, there must be a
minimum gap of 40 mm between the
top of the shelf and the underside of the
appliance.
27
Safety instructions for installation
Safety distance above the appliance
A minimum safety distance must be
maintained between the appliance and
the cooker hood above it. See the
cooker hood manufacturer's operating
and installation instructions for details
If the manufacturer's instructions are
not available for the cooker hood, a
minimum safety distance of at least
760 mm must be maintained. For any
flammable objects, e.g. utensil rails,
wall units etc. a minimum distance of at
least 760 mm must be maintained
between them and the appliance
below.
28
When two or more appliances are
installed together below a cooker hood,
e.g. an induction hob or wok and a gas
hob combiset, which have different
safety distances given in the installation
instructions, you should select the
greater distance of the two.
Safety instructions for installation
Safety distances to the sides of the
appliance
Ideally the appliance should be
installed with plenty of space on either
side. There may be a wall at the rear
and a tall unit or wall at one side. On
the other side, however, no unit or
divider should stand higher than the
built-in appliance (see illustrations).
Due to the high temperatures radiated
by the appliance, it is essential that a
minimum distance of 50 mm is
maintained between the worktop
cut-out and the back wall.
Recommended
The minimum distance a between the
worktop cut-out and a wall or tall unit to
the right or left of it is:
40 mm
for
CS 1212
CS 1221
CS 1234
CS 1223
50 mm
for
CS 1112
CS 1122
CS 1134
CS 1326
CS 1411
100 mm for
CS 1012
CS 1013
150 mm for
CS 1421
CS 1312
CS 1322
200 mm for
CS 1034
250 mm for
CS 1011
CS 1018
CS 1021
Not recommended
Not allowed
29
Safety instructions for installation
Safety distance when installing the appliance near a wall with additional
niche cladding
There must be a minimum distance of 50 mm between the niche cladding and the
worktop cut-out.
This distance is only necessary for niche cladding made of wood or any other
combustible material. For non-combustible materials (metal, ceramic tiles or
similar), this dimension can be reduced by the thickness of the niche cladding
material. The materials can warp or distort when subjected to high temperatures.
a Masonry
b Niche cladding
c Backmould
d Worktop
e Worktop cut-out
f Minimum distance of 50 mm
30
Appliance and building-in dimensions
CS 1223
108
15
520
380
78
c
c
364
+1
-
a
0
ß R4
40
50
500 +
0
-3
-1
25
0
-3
25
c
b
108
198
d
0
11
a Spring clamps
b Front
c Building-in depth
d Mains connection cable, L = 2,000 mm
31
Preparing the worktop
^ Make the worktop cut-out for one or
more appliances as applicable.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the right or left of the
appliance.
See "Safety instructions for
installation".
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
If, during installation, you find that the
seals on the corners of the frame are
not flush with the worktop surface,
the corner radius (ß R4) can be
carefully scribed to fit.
32
Installation of several appliances
When installing two or more appliances next to each other a spacer bar b must
be used between each one.
See "Fitting the spacer bars and support brackets".
Worktop cut-out
- two appliances
Worktop cut-out
- three appliances
D
D
50
50
0
0
b
b
C
A
B
C
A
To calculate the cut-out width required:
Add up the widths of each appliance and subtract 16 mm from this figure
(i. e. 8 mm is tagen off either end of the appliance run).
Number of
appliances
Appliance width in mm Worktop cut-out in mm
1
288
288 - 16 = 272
2
288, 288
288 + 288 - 16 = 560
2
288, 380
288 + 380 - 16 = 652
3
288, 288, 288
288 + 288 + 288 - 16 = 940
33
Installation of several appliances
Positioning the spacer bars and spring clamps
D
25-30
50 50
50
25-30
50
50
0
a
a
a
b
c
c a
a
a
C
A
68
72/5
80/3
B
576
380/
8
28 /
8
2/56
37
280/
2
a Spring clamps
b Spacer bars
c Gap between spacer bar and worktop
The illustration shows a worktop cut-out with spring clamps a and spacer bars b
for 3 appliances.
An additional spacer bar is required for each additional appliance. The position
for securing each additional spacer bar will depend on the width of appliance B
(288 mm / 380 mm / 576 mm).
34
Fixing the spring clamps and spacer bars
Granite and marble worktops
Wooden worktops
The screws are not required for
granite or marble worktops.
25-30
25-30
a
c
a
b
^ Position the spring clamps supplied
a and spacer bars b on the top
edge of the cut-out in the positions
marked.
^ Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
screws supplied.
c
b
^ Position and secure the spring
clamps a and spacer bars b using
strong, double-sided adhesive
tape c.
35
Fixing the spring clamps and spacer bars
a
^ Coat the side edges and the lower
edges of the spring clamps with
silicone.
d
b
^ Then fill gap d between the spacer
bars and the worktop with silicone
from the tube supplied.
36
Installing the appliance
Installing the appliance
^ Feed the connection cable down
through the cut-out.
^ Then drop the front edge of the
appliance into the cut-out.
^ Using both hands, press down
evenly on the sides of the appliance
until it clicks into position. When
doing this make sure that the seal
under the appliance sits flush with
the worktop on all sides. This is
important to ensure an effective seal
all round. Do not use sealant.
^ Connect the appliance to the mains
(see "Electrical connection").
^ Check that the appliance works.
Once installed, the hob can only be
lifted out using a special tool. It can
also be pushed up out ofe the
cut-out from below. It must be
pushed up from the back first.
37
General installation tips
Do not use sealant between the
frame of the top part of the
appliance and the worktop.
This could cause difficulties if it ever
needs to be taken out for servicing
and possibly result in damage to the
frame or the worktop.
The sealing strip under the edge of the
top part of the appliance provides a
sufficient seal for the worktop.
38
Electrical connection
All electrical work should be carried
out by a suitably qualified and
competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK).
Connection should be made via a fused
plug and switched socket or a double
pole fused spur connection unit, or a
suitable isolator (as appropriate) which
complies with national and local safety
regulations and the on/off switch should
be easily accessible after the appliance
has been built in.
If the connection cable is damaged,
it must be replaced by a suitably
qualified electrician with a special
connection cable of type H 05 V V-F
(pvc insulated), available from Miele.
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
The appliance must only be
operated when built-in. This is to
ensure that all electrical parts are
shielded. Live parts must not be
exposed.
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do not
guarantee the required safety of the
appliance.
Please make sure that the connection
data quoted on the data plate match
the household mains supply.
For extra safety it is advisable to install
a suitable residual current device
(RCD).
When switched off there must be an
all-pole contact gap of at least 3 mm in
the isolator switch (including switch,
fuses and relays).
Important U.K.
The appliance is supplied for
connection to a 230-240 V, 50 Hz
supply with a 3-core cable.
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue
= neutral
Brown
= live
WARNING
THIS APPLIANCE MUST BE
EARTHED
39
Electrical connection
Important
The electrical safety of this appliance
can only be guaranteed when
continuity is complete between the
appliance and an effective earthing
system, which complies with local and
national regulations. It is most important
that this basic safety requirement is
present and tested regularly and if
there is any doubt the electrical wiring
in the home should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
consequences of an inadequate
earthing system such as an electric
shock.
The manufacturer cannot be held
liable for damage which is the direct
or indirect result of incorrect
installation or connection.
40
After sales service, data plate
In the event of any faults which you cannot remedy yourself, or if the appliance is
under guarantee, please contact:
– Your Miele dealer, or
– the Miele Customer Contact Centre (see back cover for address).
Please note that telephone calls may be monitored and recorded to improve
our service.
When contacting Miele, please quote the model and serial number of your
appliance which are given on the data plate.
Space in which to stick the extra data plate supplied with the appliance. Ensure
that the model number is the same as the one on the front of these instructions.
41
42
43
Alteration rights reserved/ 2808
M.-Nr. 07 180 670 / 01