SETU ATA - Matrix Telecom Solutions

SETU ATA
VoIP Adaptors with FXO, FXS, GSM and Multiple SIP Accounts
Internet Telephony offers intrinsic benefits of cost and flexibility. At the
same time, legacy telephony infrastructure and habits cannot be
replaced overnight. People desire the best of both worlds-lower cost
of VoIP and convenience of using existing telephony products and
methods.
Matrix SETU ATA range of products is designed to meet this
requirement of converting VoIP network to traditional telephony
interfaces and vice-versa. It handles all the complexities of VoIP
technology internally and provides simple telephone interfaces to
make and receive calls. It is specially designed for small business and
residential users to offer them the advantages of low tariff Internet
telephony.
Let Matrix SETU ATA be your bridge to the new world of IP Telephony!
VoIP ATAs with Unique Integration of Technology, Features and Reliability
Matrix SETU ATA is a family of SIP based Analog Terminal Adaptors (ATA). It
interfaces legacy telephone devices with IP-based networks. In addition to
the standard connectivity of IP and PSTN, it also offers connectivity
between IP, GSM and PSTN networks. An ATA provides a user with the
facility of using a standard telephone instrument yet make VoIP and GSM
calls.
SETU ATA1S
While routing calls over IP network, the ATA converts voice traffic into data
packets for transmission over the Internet. When a telephone number is
dialed by a user, Matrix SETU ATA converts it into an IP call using the SIP
protocol and initiates a call to the dialed number in any part of the globe.
Using an appropriate VoIP service provider, long distance or inter-office call
charges can be reduced significantly or eliminated through peer-to-peer
calling on the IP network. The ATA significantly saves on communication
cost between multi-branch locations, relaying calls over IP and using the
local switched network to place a call on a specific network.
Making an outgoing call is as easy as from a normal telephone. The ATA
automatically translates the dialed number, matching to the format that can
be understood by the destination (IP or GSM or PSTN) network. The users
can continue to make and receive calls without worrying on which network
their calls are routed. Call progress tones like Dial Tone, Ring Back Tone and
Busy Tone are fed to the caller as per the called number status. The ATA
ensures a call is always routed through the most cost-effective network. In
addition, number based SIP account selection is provided to select the most
economical SIP account for a given outgoing number.
An incoming call on GSM, FXO or any of the SIP accounts can be received
on an existing terminal easily. The calls landing on the GSM port can be
routed through a SIP account. Incoming calls on the FXO line can be routed
through any of the SIP accounts, to avail the low tariff of IP telephony. While,
an incoming call on a SIP account can be routed through the GSM port, for
the benefits of cost and QoS (Quality of Service).
1-FXS Port, 1-WAN Port, 1-LAN Port
and 3-SIP Accounts
SETU ATA2S
2-FXS Ports, 1-WAN Port,
1-LAN Port and 3-SIP Accounts
SETU ATA211
1-FXO Port, 1-FXS Port, 1-WAN Port,
1-LAN Port and 3-SIP Accounts
Once a call is established, features like Call Hold, Call Toggle, Call Transfer,
Call Wait and Conference are supported to manage two calls from the same
FXS port. Call forward in different conditions and Do Not Disturb is also
provided. All different CLIP protocols are supported so that the user can
identify the caller before answering the call. Matrix SETU ATA provides two
Ethernet ports - one for WAN and the other for LAN. The user can connect
his PC on the LAN port and browse the internet or check his emails while
talking on VoIP calls.
Matrix SETU ATA is easy to install and operate. It can be configured using its
built-in web pages served by the internal HTTP server.
SETU ATA211G
1-FXS Port, 1-GSM Port, 1-WAN Port,
1-LAN Port and 3-SIP Accounts
PRODUCT APPLICATIONS
RESIDENTIAL APPLICATION
IP
WAN
SIP Proxy
FXS
LAN
FXS
SETU ATA2S
BUSINESS APPLICATION
GSM
IP
WAN
SIP Proxy
LAN
PBX
SETU ATA211G
PEER-TO-PEER CALLING APPLICATION
xDSL/Router
WAN
xDSL/Router
IP
WAN
PBX
SETU ATA2S
SETU ATA211
KEY FEATURES
Auto Configuration
SETU ATA can be configured automatically by retrieving its
configuration file from an Auto-Configuration Server (ACS). When
user connects SETU ATA to the network; it automatically downloads
its configuration files using TFTP, HTTP or HTTPS. This plug-n-play
feature requires the user to enter only the server address provided by
the service provider.
Auto PSTN Fall back
PSTN can be interfaced to the SETU ATA using FXO Port. This port is
used to dial out numbers to the PSTN Network. When Routing the
calls from PSTN number to SIP trunk, it may happen that the Ethernet
Link may go down or the SIP Account used is not registered. So the
call will not be routed through SIP and you will get error tone. To
avoid this you can use this feature to automatically route the call
through the FXO Port.
Automatic Number Translation
SETU ATA supports multiple port types like FXO, FXS, SIP and GSM.
Whenever a number is dialed from any of these ports, gateway
routes the call to the desired destination port as per the routing
mechanism defined for that port. In certain cases, the dialed number
string is not understood by the network through which the call is to
be routed, so by using Automatic Number Translation the dialed
number string is translated into a number that is understood by the
network or ITSP to reach the desired destination port.
Call Progress Tones and Rings
Matrix SETU ATA supports programmable tones and rings to match
those of the country where it is installed.
CLIP
SETU ATA allows users to program the FXS ports for any of the three
CLIP protocols - DTMF, FSK ITU-T V.23 and FSK Bellcore 202A.
Dialed Number Table
Matrix SETU ATA provides a list of programmable numbers or partnumbers with the preferred SIP account for each entry. When the
user dials a number, the SETU ATA finds the matching number using
the “best-fit” logic. It then uses the SIP account given against this
matching number to make that call. This ensures lowest cost for all
the outgoing calls.
Disconnect Signaling
When a call is released from the other side of the network, the Matrix
SETU ATA can propagate this call release on the FXS in the form of
disconnect signal. The device senses this signal and frees the FXS
port.
Fax over IP (FoIP)
The user can send and receive Fax over SIP account, once a Fax
machine is connected to SETU ATA. The SETU ATA supports FoIP
using T.38 UDPTL and Pass-Through.
FXO
SETU ATA FXO port should be connected to the PSTN or PBX so that
the user can make PSTN calls from the FXO port.
International Mobile Equipment Identity (IMEI) Number
International Mobile Equipment Identity (IMEI) number provided on
SETU ATA211G GSM engine is a unique 15 digit code to identify the
GSM port. This number can be used to associate and tie the
equipment with a particular GSM network.
Web based Programming Tool
Flexible and user friendly windows based GUI software helps in
programming the features through web browser. This web based
programming feature helps users to configure the SETU ATA from any
part of the world once it is connected with the IP network.
MAC Cloning
When replacing the existing hardware with a new one, one can simplify
the installation process by simply copying the WAN associated MAC
Address to the new hardware. Thereby, eliminate the delay involved in
the setup process by informing the service provider of the newly
installed equipment.
Network Selection
SETU ATA211G provides flexibility to register with a GSM network
manually or automatically. This is useful when the installation is close
to a state or national border where local and foreign GSM networks
overlap. Programming the ATA to work only with selected network
prevents it from registering with an overlapping foreign network.
Multi-Stage Dialing
Multi-Stage Dialing is useful for ATAs connected to a SIP Server used
for networking PBX of multiple sites. The user can dial the entire
number string, both the destination number and extension number of
the destination PBX together. The ATA will split the string into two
stages, and dial out the destination number first and on receiving the
answering signal it dials the extension number. This ensures hassle
free access to PBX extension.
Peer-to-Peer Calling
SETU ATA can make and receive calls from other VoIP users without
any Registrar or Proxy server. Numbers and IP addresses can be
assigned to the other VoIP users to provide direct access across the
network. For Peer-to-Peer calling, SETU ATA provides two options - (i)
Peer-to-Peer Number Dialing (ii) IP Address Dialing. Organizations
having multiple locations like branch offices and factories can use this
feature to provide direct dialing between the dispersed end-points.
PIN Authentication
Incoming calls on FXS, FXO, SIP or GSM ports of the ATA can be
restricted to a specific caller. The caller has to first prove his
authentication before calling to ATA. This feature is used to avoid the
possibility of malicious calls and to avoid misuse of its services.
PPPoE
Matrix SETU ATA supports PPPoE client and hence can be used with
any xDSL modems.
Quad-Band Support
Matrix SETU ATA211G supports Quad-Band for 2G Network
Returned Calls to Original Caller (RCOC)
Matrix SETU ATA211G maintains records of all the unsuccessful
calls on GSM and IP network. When a call is returned, it routes the
call to the original caller comparing the called number, caller's
number and the system port details to the entries stored in its RCOC
table. Thereby a returned call can be landed to the extension which
placed the call, hence, saving valuable time.
Router
Basic routing capabilities are provided so that LAN port packets can
be transferred on WAN port. This allows the user to browse the
internet and check his emails while making and receiving VoIP calls.
Signal Strength Indication
SETU ATA211G gives the indication of signal strength available for
communication. Thus the possibility of network availability can be
found. The signal strength indication is shown on the LCD of the
telephone instrument supporting FSK CLIP.
SIM PIN
SETU ATA211G allows user to program 4 digits PIN number
(Personal Identification Number) which prevents the SIM against
unauthorized use. User has to enter PIN for making any operations.
User can change the SIM PIN as and when required. SIM gets
blocked if PIN is entered wrongly thrice in a row.
Speech Volume Setting
SETU ATA allows user to set transmit and receive gain to improve the
quality of speech.
Speed Dialing
Frequently used numbers can be programmed in the internal phone
book with 99 entries. The user can dial these numbers by using short
codes in place of the complete, long numbers.
Supplementary Services
SETU ATA supports supplementary service like Call Hold, Call Waiting,
Call Toggle, Call Transfer, Call Forward, Conference, Caller ID, DND and
Making another Call. These are the service provider dependant
features.
Surface Mount Technology (SMT)
The Surface Mount Technology is the current semi-conductor
packaging technology resulting in less heat generation and low power
consumption. This is in turn improves reliability.
System Log
Syslog is one of the Built-in protocol used extensively for sending
debug messages on IP network. This client/server protocol uses UDP
as transport protocol for debugging process. Logging has several
benefits which include easier and faster troubleshooting, improved
security and a better system administration. Debug messages are sent
to remote server on IP network for finding and reducing the number of
bugs or defects from a system.
SIP Accounts
Multiple SIP accounts can be programmed and each FXS user can
be assigned one of the SIP accounts for outgoing calls. Dynamic
allocation of SIP account is also possible using Dial Plan.
FEATURES LIST
 100Rel/PRACK (RFC3262)
 Answer Signaling
 Auto Configuration
 Auto PSTN Fallback
 Automatic Number Translation
 Call Forward Unconditionally
 Call Forward on Busy
 Call Forward on No Reply
 Call Hold
 Call Toggle
 Call Waiting
 Caller ID
 Call Transfer-Blind
 Call Transfer-Attended
 Conference 3-Party
 Called Party Number Table
 CLIP (DTMF, FSK-ITU-T V.23, Bellcore 202A)
 CLIR (SIP/ GSM)
 Comfort Noise Generation
 DHCP Client/ PPPoE Client
 Dialed Number Table
 Digest Authentication
 Disconnect Signaling
 Do-Not-Disturb (DND)
 Echo Cancellation
 Fax over IP-T.38 and Pass-Through
 Flash Timer
 Forward Error Correction (FEC)
 Full Duplex Audio
 IMEI Number
 Incoming Call Routing
 LED Indications
 MAC Cloning
 Making Second Call
 Mobile Network Selection
 Multiple Gateway Support
 Multi-Stage Dialing
 Password Protection
 Peer-to-Peer Calling
 PIN Authentication
 Polarity Reversal
 Programmable Call Progress Tones and Rings
 Quad-Band Support
 Return Call to Original Caller (RCOC)
 Signal Strength
 SIM PIN
 SIP over TCP
 Speech Volume Setting (Transmit and Receive)
 Speed Dialing
 STUN
 Supplementary Services
 Symmetric RTP
 Syslog Client
 Voice Activity Detection
 VLAN Tagging
 Web-based GUI for Configuration
MATRIX SETU ATA FEATURES LIST
Features List
SETU ATA1S
SETU ATA2S
SETU ATA211
SETU ATA211G
3-Party Conference
Answer Signaling
Auto Configuration
Automatic Number Translation
Auto PSTN Fall Back
Called Party Number Table
Call Progress Tone and Rings
Class of Service (CoS)
CLIP
CLIR
Comfort Noise Generation
DHCP Client
Dial Plan
Digest Authentication
Disconnect Signaling
Echo Cancellation
Fax over IP- T.38 and Pass Through
Flash Timer
Forward Error Correction
Full Duplex Audio
IMEI Number
LED Indications
Multiple Gateway
Multi-Stage Dialing
Mobile Network Selection
Password Protection
PCAP Trace
Peer-to-Peer Calling
Phone Book
PIN Authentication
Polarity Reversal
PPPoE Client
Quad-Band Support
Return Call to Original Caller (RCOC)
Speech Volume Settings
Speed Dialing
Signal Strength
SIM PIN
Supplementary Services
STUN Support
Symmetric RTP
Syslog Client
VLAN Tagging
Web based GUI for Configuration
Unavailable
SYSTEM CAPACITY AND RESOURCES
Hardware
FXS Ports
FXO Ports
GSM Ports
LAN Port
WAN Port
DC Power Jack
SETU ATA1S
1
SETU ATA2S
2
SETU ATA211
1
1
1
1
1
1
1
1
1
1
1
SETU ATA211G
1
1
1
1
1
Available
TECHNICAL SPECIFICATIONS
VoIP
VoIP Protocols
Network Protocol
SIP
NAT
Voice CODECS
Line Echo Cancellation
Call Progress Tones
Voice
Fax
Quality of Service
Data Network
Security
: SIP v2, SDP, RTP, RFC 2833
: IPv4, TCP, UDP, DHCP, SNTP,
STUN, HTTP, PPPoE
: Multiple Accounts Out BoundProxy
Support, Display Name, User Name,
Password, URL, Proxy URL, Registrar
URL, Registrar Interval
: STUN and NAT Keep Alive
: G.711 A-Law, µ-Law, G.723,
G.729A, G.729B
: G.168 with 8/16/32ms Tail Length
: Dial Tone, Ring Back Tone, Busy
Tone, Error Tone
: Dynamic Jitter Buffer (Adaptive),
Comfort Noise Generation and
Voice Activity Detection
: T.38 and Pass Through
: Layer 3 DIFFServ and TOS
: WAN Port (RJ45), Auto MDIX
10/100 BaseT,
LAN Port (RJ45), Auto MDIX
10/100 BaseT
: Password Protected Administration
Power Supply
SETU ATA1S
SETU ATA2S
SETU ATA211
SETU ATA211G
Power Consumption
SETU ATA1S
SETU ATA2S
SETU ATA211
SETU ATA211G
Mechanical
Dimensions (WxHxD)
SETU ATA1S
SETU ATA2S
FXS Port
Connection
Off Hook Impedance
Loop Limit
Loop Feed
Ringing Voltage
Pulse Dialing
DTMF Dialing and Reception
Caller ID Presentation (CLIP)
Call Maturity
Protection
FXO Port
Connection
Off Hook Line Impedance
Loop Limit
Pulse Dialling
DTMF Dialling and Reception
CLI Reception
Call Maturity
Protection
GSM Port
GSM Band
: RJ11
: 600 Ω
: 270 Ω (Max) Excluding Telephone Set
: 39mA (Max)
: 55Vrms @25Hz, 3REN
: 10 PPS and 20PPS @ 1:2, 2:3 and 1:1
: ITUT Q.23 and Q.24
: DTMF, FSK ITU-T V.23 and FSK
Bellcore 202A
: Polarity Reversal
: Solid State (Over Voltage and
Over Current) built-in Secondary
Protection
: RJ11
: 600 Ω
: 1500 Ω
: 10 PPS and 20 PPS @ 1:2, 2:3
and 1:1
: ITU-T Q.23 and Q.24
: DTMF, FSK ITU-T V.23 and FSK
Bellcore 202A
: Polarity Reversal
: Solid state (Over Voltage and over
current) built-in Secondary Protection
: Quad-Band: GSM850, EGSM900,
DCS1800, PCS1900
SIM Card:
: One SIM
SIM Interface
: 1.8V, 3V
Transmission Power
: Class 4 (2W) at GSM 850 and
EGSM900 MHz band
Class 1(1W) at DCS1800 and
PCS1900 MHz band
RF Sensitivity
: Better than -102dBm at
GSM850/EGSM900/DCS1800/
PCS1900
External Antenna
: Gain: Dipole= 2.5 dBi
Type of Antenna
: Dipole/Whip Fixed/Omni Directional
Antenna Roof- Top Antenna with
flexible cable of 3 mtrs.(optional)
Antenna Connector: SMA (Female),
50Ω Impedance
Speech Gain (Transmit- Receive) : Programmable
SETU ATA211
SETU ATA211G
: Input- 12VDC @1.25A through
External Adaptor (90-265VAC, 4763Hz) Connector- DC Power Jack
: Input- 12VDC @1.25A through
External Adaptor (90-265VAC, 4763Hz)Connector- DC Power Jack
: Input- 12VDC @1.25A through
External Adaptor (90-265VAC, 4763Hz) Connector- DC Power Jack
: Input- 12VDC @ 0.75A through
External Adaptor (90-265VAC, 4763Hz)Connector- DC Power Jack
: 5W Approx.
: 5W Approx.
: 5W Approx.
: 6W Approx.
: 7.9x10.5x2.7cm
(3.1”x4.1”x1.1”)
: 7.9x10.5x2.7cm
(3.1”x4.1”x1.1”)
: 7.9x10.5x2.7cm
(3.1”x4.1”x1.1”)
: 7.9x10.5x2.7cm
(3.1”x4.1”x1.1”)
Unit Weight
SETU ATA1S
SETU ATA2S
SETU ATA211
SETU ATA211G
: 0.45Kgs (1.10lbs) Approx.
: 0.45Kgs (1.10lbs) Approx.
: 0.45Kgs (1.10lbs) Approx.
: 0.45Kgs (1.10lbs) Approx.
Shipping Weight
SETU ATA1S
SETU ATA2S
SETU ATA211
SETU ATA211G
: 1.00Kgs (2.20lbs) Approx.
: 1.00Kgs (2.20lbs) Approx.
: 1.00Kgs (2.20lbs) Approx.
: 1.00Kgs (2.20lbs) Approx.
Material
SETU ATA1S
SETU ATA2S
SETU ATA211
SETU ATA211G
: ABS Plastic
: ABS Plastic
: ABS Plastic
: ABS Plastic
Installation Mounting
SETU ATA1S
SETU ATA2S
SETU ATA211
SETU ATA211G
: Wall and Table-Top
: Wall and Table-Top
: Wall and Table-Top
: Wall and Table-Top
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
: -100C to +500C
(-140F to +1220F)
: -400C to +850C
(-400F to +1850F)
: 5-95% RH (Non-Condensing)
: 0-95% RH (Non-Condensing)
at 400C
COMPLIANCES
EMI/EMC
Conducted Emission
Radiated Emission
Harmonic Current Emission
Voltage Flicker
Electro-static Discharge
Radiated Susceptibility
Electrical Fast Transient
Surge
Conducted Immunity
Power Frequency Magnetic Field
Voltage Interruption & Dips
FCC
Conducted Emission
Radiated Emission
EC Directives
R&TTE 1999/5/EC
LVD 73/23/EEC
EMC 89/336EEC
Safety
IEC 60950-1
: CISPR 22 Class A
: CISPR 22 Class A
: IEC 61000-3-2
: IEC 61000-3-3
: IEC 61000-4-2
: IEC 61000-4-3
: IEC 61000-4-4
: IEC 61000-4-5
: IEC 61000-4-6
: IEC 61000-4-8
: IEC 61000-4-11
: FCC Part 15 Sub Part B Class A
: FCC Part 15 Sub Part B Class A
: 2001 First Edition
VoIP PRODUCTS FROM MATRIX
ETERNITY IP-PBX
The IP-PBX with Universal Connectivity and Seamless Mobility
SAPEX
VYOM CCX
All-in-One Embedded IP-PBX Server
High-Density SIP Gateway
ETERNITY
The Universal Telephony Gateway
SETU VGFX
Multi-Port SIP based VoIP to GSM-FXO-FXS Gateway
SETU VFXTH
Multi-Port SIP based VoIP to FXO-FXS Gateway
SETU VFX
Multi-Port SIP based VoIP to FXS Gateway
SETU ATA1S
SIP based Analog Telephone Adaptor with 1 FXS Port and 2 Ethernet Ports
SETU ATA2S
SIP based Analog Telephone Adaptor with 2 FXS Ports and 2 Ethernet Ports
SETU ATA211
SIP based Analog Telephone Adaptor with 1 FXO, 1 FXS and 2 Ethernet Ports
SETU ATA211G
SIP based Analog Telephone Adaptor with 1 FXS, 1 GSM and 2 Ethernet Ports
SETU VP248PE
The High-Definition IP-Phone with 6 Lines x 24 Characters LCD Display and PoE
SETU VP248SE
The High-Definition IP-Phone with 2 Lines x 24 Characters LCD Display and PoE
SETU VP248P
The High-Definition IP-Phone with 6 Lines x 24 Characters LCD Display
SETU VP248S
The High-Definition IP-Phone with 2 Lines x 24 Characters LCD Display
ABOUT MATRIX
An ISO 9001 Company, Matrix is a leader in Telecom and Security solutions for modern businesses and enterprises. An innovative, technology driven and customer focused
organization; the company is committed to keep pace with the revolutions in the telecom and security industries. With around 30% of its human resources dedicated to the
development of new products, Matrix has launched cutting-edge telecom products like IP-PBX, Universal Gateways, VoIP Gateways and Terminals, GSM Gateways, Access
Control and Time-Attendance Systems and Fire Alarm Systems. These solutions are feature-rich, reliable and conform to the international standards.Having global foot-prints in
Asia, Europe, North America, South America and Africa through an extensive network of more than 500 channel partners, Matrix ensures that the products serve the needs of its
customers faster and longer. Matrix has gained trust and admiration of more than 150,000 customers representing the entire spectrum of industries. Matrix has won many
awards for its innovative products.
394-GIDC, Makarpura,
Vadodara-390010, India.
Phone: +91 265 2630555
Fax: +91 265 2636598
Email: Inquiry@MatrixComSec.com
SMS ‘MATRIX’ to 99987 55555
www.MatrixComSec.com
V1.R3-Nov ‘10
MATRIX COMSEC PVT. LTD.