AOC LC27H060 User`s manual

Downloaded From TV-Manual.com Manuals
Content
Downloaded From TV-Manual.com Manuals
English
FOR YOUR SAFETY ..........................................................................................................................2
PRECAUTIONS AND REMINDERS ...................................................................................................4
IMPORTANT SAFETY INSTRUCTIONS ............................................................................................6
Quick Installation.................................................................................................................................8
Wall-mount instruction.........................................................................................................................9
ACCESSORIES ................................................................................................................................10
FRONT PANEL BUTTONS ............................................................................................................... 11
BACK PANEL BUTTONS..................................................................................................................12
REMOTE CONTROL ........................................................................................................................13
REMOTE CONTROL ........................................................................................................................13
INSTALLATION .................................................................................................................................15
Connecting RF antenna and Cable TV .....................................................................................15
Connecting to DVD / Set Top Box .............................................................................................15
Connecting to External Stereo System to Listen to LCD TV Sound..........................................17
Connecting to A/V Device with SPDIF input..............................................................................17
Connecting to the Headphone ..................................................................................................17
Connecting to a Computer ........................................................................................................18
Connecting the USB input.........................................................................................................19
Connecting with the power cord................................................................................................19
BASIC OPERATION .........................................................................................................................20
Turning on the LCD TV .............................................................................................................20
Power On/Off ............................................................................................................................20
Initial Setup ...............................................................................................................................20
Select input source....................................................................................................................21
Volume Adjusting.......................................................................................................................21
INFO..........................................................................................................................................22
Electronic Program Guide (EPG) ..............................................................................................22
Channel Select..........................................................................................................................22
List.............................................................................................................................................23
Favorite Channels .....................................................................................................................23
Sleep Time Setting ....................................................................................................................23
Zoom .........................................................................................................................................23
MTS Selecting...........................................................................................................................24
C.C Mode ..................................................................................................................................24
Using the OSD function.............................................................................................................24
ADVANCED OPERATION—OSD MENU .........................................................................................25
PICTURE Menu ........................................................................................................................25
AUDIO Menu.............................................................................................................................26
TIME Menu................................................................................................................................28
OPTION Menu ..........................................................................................................................28
LOCK Menu ..............................................................................................................................31
CHANNEL Menu .......................................................................................................................35
USB Source ..............................................................................................................................38
TECHNICAL SPECIFICATION .........................................................................................................40
SAFETY PRECAUTIONS .................................................................................................................41
CARE AND MAINTENANCE ............................................................................................................42
TROUBLESHOOTING......................................................................................................................42
SA 1965
English
SA 1966
DANGEROUS VOLTAGE: The lightning flash with
arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
INSTRUCTIONS: The exclamation point within on
equilateral triangle to alert the User to the presence of
important operating and maintenance (servicing)
instruction In the literature accompanying the appliance.
Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, Such as vases, Shall be placed on the apparatus.
Caution - Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
1
Downloaded From TV-Manual.com Manuals
FOR YOUR SAFETY
Before operating the TV please read this manual thoroughly. This manual should
be retained for future reference.
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTICE
1.
2.
3.
The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modification to this equipment. It is the responsibilities of the
user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Dangerously high voltages are present inside the TV. Do not open the cabinet.
Refer servicing to qualified personnel only.
SAFETY: Lamp Disposal
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE
INFORMATION, CONTACT THE ELECTRONIC
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.
2
Downloaded From TV-Manual.com Manuals
English
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
DIGITAL TELEVISION TRANSITION NOTICE
English
This device contains a digital television tuner, so it should receive digital over the
air TV programming, with a suitable antenna, after the end of full-power analog
TV broadcasting in the United States on June 12, 2009. Some older television
receivers, if they rely on a TV antenna, will need a TV Converter to receive over
the air digital pro-gramming, but should continue to work as before for other
purposes (e.g., for watching low-power TV stations still broadcasting in analog,
watching pre-recorded movies, or playing video games).
For more information,
call the FCC at 1-888-CALL-FCC (1-888-225-5322)
or see www.DTV.gov. For information on the TV Converter program, and on
government coupons that may be used toward the purchase
of one, see www.dtv2009.gov,
or call the NTIA at 1-888-DTV-2009.
AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIGITAL
Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá
recibir una programación digital televisada por aire, con una antena adecuada,
cuando se terminará la transmisión de alta potencia de la televisión analógica en
los Estados Unidos el 12 de Junio de 2009. Ciertos receptores de televisión
antiguos, si dependen de una antena de TV, necesitarán un conversor de TV
para recibir por el aire una programación digital, pero seguirán funcionando como
antes para otros usos (por ejemplo para ver emisoras de TV de baja potencia que
todavía transmiten en analógico, para ver películas pregrabadas, o para utilizar
sus videojuegos).
Para obtener más información,
llame FCC 1-888-CALL-FCC (1-888-225-5322)
o refiérase a www.DTV.gov. Para toda información sobre el programa de
conversores de TV, y acerca de los cupones del gobierno que se pueden usar
para comprarlos, refiérase a www.dtv2009.gov,
o llame al NTIA al 1-888-DTV-2009.
3
Downloaded From TV-Manual.com Manuals
PRECAUTIONS AND REMINDERS
Don't place the TV in confined spaces
or in a box when using it.
Unplug immediately if is malfunction
like no picture, no video/audio,smoke
and bad odor from TV.
Unplug immediately if other foreign
materials are put inside TV box or if
the TV fell down.
Don't throw any object inside the TV
box like metals or other flammable
materials.
Prohibit/Avoid opening TV cabinet
English
Place unit on even surfaces.
4
Downloaded From TV-Manual.com Manuals
Avoid direct sunlight, dusty, high
humidity and smoky areas.
Make sure to unplug the unit when not
in use for a long period of time (days).
Call service personnel to clean the
internal part of the TV once a year.
Do not cover or block any vents and
openings. Inadequate ventilation may
shorten the life of the display unit and
cause overheating.
Do not place the display near water,
such as bathtub, washbasin, kitchen
sink laundry tub, swimming pool or in
a damp basement.
English
Remember to unplug the AC cord
from the AC outlet before cleaning. Do
not use liquid cleaners or aerosol
cleaners to clean the display.
Notice for Remote Controller
Avoid Dropping
6
5
4
7
Avoid Aerosol Cleaners
3
2
1
Avoid Liquids
9
8
3
2
1
7
7
6
9
8
0
0
5
Downloaded From TV-Manual.com Manuals
3
5
4
9
8
2
1
6
5
4
0
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and third grounding prong. The wide blade or third
prong is provided for your safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. The TV should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
14. Unplug this apparatus during lightning storms or when unused for long
periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into apparatus,
the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
16. This product may contain lead or mercury. Disposal of these materials may
be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries
Alliance: www.eiae.org
17. Damage Requiring Service – The appliance should be serviced by qualified
service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked
change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
6
Downloaded From TV-Manual.com Manuals
English
1.
2.
3.
4.
5.
6.
7.
English
18. Tilt/Stability – All televisions must comply with recommended international
global safety standards for tilt and stability properties of its cabinets design.
Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet, which could ultimately overturn
the product.
Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
19. Wall or Ceiling Mounting – The appliance should be mounted to a wall or
ceiling only as recommended by the manufacturer.
20. Power Lines – An outdoor antenna should be located away from power lines.
21. Outdoor Antenna Grounding – If an outside antenna is connected to the
receiver, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides
information with respect to proper grounding of the mats and supporting
structure grounding of the lead-in wire to an antenna-discharge unit, size of
grounding connectors, location of antenna-discharge unit, connection to
grounding electrodes and requirements for the grounding electrode. See
Figure below.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE
Note to the CATV system installer: This reminder is provided to call the
CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the adapter!
22. Objects and Liquid Entry – Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
7
Downloaded From TV-Manual.com Manuals
Quick Installation
Installing the Stand Base
English
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Install the stand base to the monitor.
Disconnecting the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Press the 2 tenons inwardly.
3. Pull the stand base to remove.
4. Press on four corners of the hinge cover and pull as arrow direction to disengage the hinge
cover.
5. Remove the 4 screws on the hinge, then pull up the stand slowly.
8
Downloaded From TV-Manual.com Manuals
Wall-mount instruction
Attaching The Optional Wall Mount Arm (not supplied)
English
Follow these steps to finish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the
back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for
instructions on attaching it to the wall.
NOTE
200mmx100mm VESA high hole (n=4), M4, pitch =0.7 mm, deep =10 mm screw mounting
kit not included.
Due to safety concerns, if the VESA mounting kit is purchased separately please make sure the
mounting kit is UL-Listed, and replaceable only by service personnel.
9
Downloaded From TV-Manual.com Manuals
ACCESSORIES
Thank you for purchasing this LCD-TV.
This LCD-TV package comes with:
English
LCD TV
Pedestal stand
Remote control
Battery AAA x 2
Power Cord
User’s Guide book
Quick Setup Guide
Warranty Card
10
Downloaded From TV-Manual.com Manuals
FRONT PANEL BUTTONS
English
…
†
‡
ˆ
‰
Š
‹
Œ
Volume Up
Volume Down
On Screen Display Menu On/Off
CH Up
CH Down
Input Source Selection (Enter)
Power ON/OFF button
Power LED Indicator
Remote Control Receiver
11
Downloaded From TV-Manual.com Manuals
BACK PANEL BUTTONS
O
P
A
BC
D
E F
G
A
Power (AC input)
B
USB Terminal
C
HDMI1 Input Terminal
D
HDMI2 Input Terminal
E
PC Audio input
F
VGA signal input
G
YPbPr signal input
H
YPbPr signal Audio input (left/right)
I
Audio output (left/right)
J
AV/ S-Video signal Audio input (left/right)
K
Composite Video input
L
S-Video input
M
Cable/ Air TV input
N
Headphone Jack
O
HDMI3 Input Terminal
P
SPDIF Optical output
12
Downloaded From TV-Manual.com Manuals
H
I
JK LM
English
N
REMOTE CONTROL
English
13
Downloaded From TV-Manual.com Manuals
Remote control button function as follows:
POWER
Power ON/OFF
2
INFO
Display current information
3
SLEEP
Set timer to turn off TV
4
ZOOM
Adjust window size
5
0~9, - number
Directly channel select
6
GUIDE
Select electronic program guide (EPG) (Only available in DTV
source)
7
+ VOL -
Adjust volume UP/DOWN
8
EXIT
OSD exit
9
UP/ DOWN/ LEFT/
RIGHT/ ENTER
Move the cursor In OSD menu: UP/ DOWN for OSD function
select and LEFT/ RIGHT for function adjust
ENTER:Confirm selection or enter selected menu
10
INPUT
Input source select
11
MUTE
Volume mute ON/OFF
12
MTS
Select Mono, Stereo or SAP sound
13
TV
Direct to TV source
14
C.C
Select caption mode
15
RETURN
Return to previous channel
16
▲ CH ▼
Adjust channel UP/DOWN
17
LIST
Select channel from program list
18
FAV
Select from preset Favorite Channels
19
MENU
On Screen Display (OSD) menu ON/OFF
14
Downloaded From TV-Manual.com Manuals
English
1
INSTALLATION
Connecting RF antenna and Cable TV
Make sure the power is OFF before installing your LCD TV.
English
1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV
channels into memory with Auto Scan function when using an antenna TV system. This air
input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV
system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 35.
2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV
channels into memory with Auto Scan function when using a cable TV system. The cable
input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)
and Digital cable system (clear QAM) can be found by the scanning of “Cable” with Auto Scan
function. See page 35.
RF Cable, CATV/ Digital cable
or Adapter (not supplied)
Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To
watch both of them, use an adapter to connect both Air and Cable cables to the jack.
Connecting to DVD / Set Top Box
Connect Video/Audio cables from compatible devices into the back panel of LCD TV.
1) With AV cable:
VCD or DVD Player
RCA A/V Cable (not supplied)
15
Downloaded From TV-Manual.com Manuals
2) With S-Video cable:
S-Video Cable (not supplied)
Audio Cable (not supplied)
3) With YPbPr cable:
Audio Cable (not supplied)
VCD or DVD Player
YPbPr Cable (not supplied)
4) With HDMI cable:
VCD or DVD Player
(DVD Player should have
the HDMI output terminal)
HDMI Cable (not supplied)
16
Downloaded From TV-Manual.com Manuals
English
VCD or DVD Player
Connecting to External Stereo System to Listen to LCD TV Sound
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo
system sold separately).
English
Audio in Cable
(not supplied)
Stereo system
Connecting to A/V Device with SPDIF input
Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV.
Audio Cable
(not supplied)
A/V Device
SPDIF Optical Cable
(not supplied)
Stereo System
Connecting to the Headphone
Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold
separately).
Headphone
(not supplied)
17
Downloaded From TV-Manual.com Manuals
Connecting to a Computer
1) With VGA Cable:
Connect the VGA cable from VGA output of the computer to the VGA terminal input of your
LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the
audio input terminal (green) of the LCD TV.
PC
VGA 15 Pin Cable (not supplied)
2) With HDMI-DVI Cable:
Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input
of the LCD TV. Also, connect the green end of the Audio In cable from the audio output of your
computer to the audio input terminal (green) of the LCD TV.
PC
PC Audio In Cable (not supplied)
HDMI-DVI Cable (not supplied)
PC
PC Audio In Cable (not supplied)
HDMI-DVI Cable (not supplied)
18
Downloaded From TV-Manual.com Manuals
English
PC Audio In Cable (not supplied)
Connecting the USB input
Connect the USB device to the USB IN jack on TV.
Press the MENU button to display the OSD main menu, and press ◄ or ► to select “Option” menu,
then press ENTER or ▼ to enter the menu. Press ▲ or▼ to select “Media”, and use ► to enter
“Media” setting.
Note: This unit can play the media files contained in the USB device, and only supports JPEG,
BMP, and PNG image files.
English
USB Device
Connecting with the power cord
Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have
been completed, and plug the other end of the power cord into a correctly grounded electrical
outlet.
AC power socket
Power Cord
19
Downloaded From TV-Manual.com Manuals
BASIC OPERATION
To operate your LCD TV, you may use the TV remote control or side panel buttons to select input
source, change channels, or adjust volume.
Turning on the LCD TV
Power On/Off
To turn the LCD TV on/off:
Press POWER button on the right side of LCD TV or press POWER button on your remote control
to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on, and lights
orange when TV is off.
Note: When there is no signal in the PC mode, the power LED indicator lights orange after a few seconds’
idleness.
Initial Setup
When the TV is initially powered on, basic settings proceed automatically and subsequently:
(Setup Wizard only appears when first turning the TV on and without channel scanning.)
1. Press the POWER button on the remote
control. The Setup Wizard window will be
display.
2. Press ◄ or ► to select OSD language,
then press ENTER, ◄ or ► to confirm the
selection, and press ENTER once more to
go to next step. To change the selection,
press ▲ or ▼. To return to the previous
page, press MENU.
3. Select Time Zone of your location. To press
▼ to setup DST (Daylight Saving Time) and
select On or Off with ◄ or ►, according to
the time zone of your area. To press ▼ to
setup Time Format, and select 12-hour or
24-hour with ◄ or ►, then press ENTER to
continue.
20
Downloaded From TV-Manual.com Manuals
English
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug and the power LED indicator will light orange.
4. Select TV Source from Air or Cable, then
press ENTER to continue.
English
5. The Initial Setup will be completed after
Cannel scanning is finished. To interrupt the
scanning, press MENU at any time.
Select input source
To select the required input source:
Press the INPUT button on the remote control, Use ▲▼ to select the required input source
between TV, AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB.
To confirm the selection, press ENTER.
Volume Adjusting
Press + VOL– to adjust volume.
To turn off the volume, press MUTE.
If you want to restore volume, press MUTE again, or press + VOL– directly.
21
Downloaded From TV-Manual.com Manuals
INFO
To display the current information of the LCD TV: Press INFO, and the current state will be displayed
on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type,
etc., depending on what input source it is in.)
Electronic Program Guide (EPG)
Press the GUIDE button on the remote control and the program information for the channel you
are watching will be displayed on the screen. This function is only available when in DTV source.
* The picture here shows an example of the GUIDE screen in a DTV source.
Channel Select
Press number key or ▼CH▲ button to select your desired channel.
1. ATV
The “-” button has no function in ATV mode. Directly press the number buttons to select
channels.
2. DTV
Use“-"button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press“-"→ press 3.
• Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct
to the channel immediately, or wait for 3 seconds to change automatically.
• Return to the previous channel, press RETURN button.
22
Downloaded From TV-Manual.com Manuals
English
* The picture here shows an example of the INFO screen in a DTV source.
List
Press LIST button and there will be a small window showing program list, you can scroll through
the list to select the channel you want directly without using the ▼▲ button.
English
Favorite Channels
Press FAV button to show Favorite List and select your favorite channels that have already been
stored. (You need to preset the favorite channels from the OSD menu to enable this function.)
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off
the LCD TV after a preset period of time passed. There are several times for choice – Off, 5min,
10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min.
Zoom
Press ZOOM button repeatedly to select the screen size. You can select from Normal, Movie Scale,
Zoom In, and 4:3.
Normal: Suitable for stretching 4:3 programs to fill the screen.
Movie Scale: This mode is useful for 1.78:1 DVDs, When viewing 1.85:1 DVDs
movie scale mode will still show very thin black bands at the top and bottom of the screen.
23
Downloaded From TV-Manual.com Manuals
Zoom In: Suitable for viewing wide-screen 2.35:1 anamorphic DVDs in full screen.
4:3: Suitable for viewing conventional 4:3 programs in their normal format.
Press MTS button to choose the available sound output that is preset by TV broadcasting station.
C.C Mode
Press C.C button to select the caption mode.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the remote control.
The basic operation is as following:
Press MENU to display OSD menu.
Press ◄► to select your desired top Menu, and press ENTER or ▼ to enter the menu you
select.
Use ▲▼ to select the control you want to adjust.
When selecting the control with ►, press ► to enter next level menu or enable the function.
Press ◄► to adjust or select the settings.
Press MENU to exit from the OSD menu.
24
Downloaded From TV-Manual.com Manuals
English
MTS Selecting
ADVANCED OPERATION—OSD MENU
PICTURE Menu
—To adjust the picture quality
In TV, AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3 source:
English
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
In PC source:
In USB source:
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2,
HDMI3, PC and USB sources.
Picture Mode: To select picture mode between Standard, Dynamic, Soft, and Personal.
Contrast: To adjust contrast of video. (right: Max, left: Min.)
Brightness: To adjust luminance of video. (right: Max, left: Min.)
Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)
Tint: To adjust tint level. (Except PC source)
Color: To adjust color. (right: brilliant color, left: pale color.) (Except PC source)
Color Mode: To select color mode from Normal, Warm, Cold or Personal. (Except USB source)
25
Downloaded From TV-Manual.com Manuals
Zoom Mode: To select image size from Normal, Movie Scale, Zoom In or 4:3. (Except PC and
USB source)
Noise Reduction: To select noise restriction function from Middle, Strong, Off, or Weak.
(Except PC and USB source)
Advanced: To adjust advanced PC functions, press ► to enter. (only appear in PC source)
English
H-Pos: To adjust the horizontal position of the picture.
V-Pos: To adjust the vertical position of the picture.
Clock: To adjust clock frequency in order to get optimized horizontal size.
Phase: To adjust delay time of phase in order to reduce the noise of picture.
Auto: To auto adjust picture’s horizontal position, vertical position, clock, phase, fine tune
and H-Size.
AUDIO Menu
—To set the audio quality and status
Note: The AUDIO Menu will disappear in USB sources. When in TV, AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3 and PC source, the AUDIO Menu will appear.
In DTV mode:
In ATV mode:
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
26
Downloaded From TV-Manual.com Manuals
In AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC source:
English
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
Sound Mode: To select sound mode between Standard, Music, Movie, Sports, and Personal.
Bass: To adjust bass.
Treble: To adjust the treble.
Balance: To adjust left and right audio balance.
Audio Language: To select the available audio languages. (only enabled in DTV mode)
MTS: Press ◄► to select the audio language from STEREO, SAP or Mono. (only appears in
ATV mode)
SRS TruSurround HD: To enjoy a concert hall effect, select “On” when stereo is playing.
SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from
two speakers, complete with rich bass, high frequency detail and clear dialog.
Audio Only: To turn off the screen picture but keep the sound on.
TruSurround HD, SRS and the
son marcas comerciales de SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
27
Downloaded From TV-Manual.com Manuals
TIME Menu
—To set up time zone
It is active in all input source:
English
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
Sleep Timer: Off, 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min.
Time Zone: To select the correct Time Zone for your area.
DST: To turn on/off summer Daylight Saving Time.
Time Format: To select time format from 12-hour or 24-hour.
Auto Sync: To enable automatic synchronization of time.
Clock: Only when Auto Sync is off, the current time is adjustable. Press ► to enter. Use ◄►
to move between Year, Month, Date, Hour, Minute, and use ▲▼ to adjust. Select OK and
press ENTER to save the setting.
OPTION Menu
—To set up OSD window
In TV, AV, S-Video source:
In YPbPr, PC source:
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
28
Downloaded From TV-Manual.com Manuals
In HDMI1, HDMI2, HDMI3 source:
In USB source:
English
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
Menu Language: To select an OSD language from English, French or Spanish.
Transparency: To change the transparency of OSD window. (0%, 25%, 50%, 75%, 100%)
OSD Time Out: To setup the display time of OSD. (5, 15, 30, 45, and 60 seconds)
Closed Caption: To set close caption options.(Only available in TV, AV, S-Video source.)
CC Mode: To select Closed Caption Mode from CC Off, CC On, or CC on Mute.
Basic Selection: To set basic analog closed caption options. (CC1~CC4, TEXT1~TEXT4,
or Off)
Advanced Selection: To select closed caption signal formats and set up caption modes
for digital TV channels. (Service1~6, or Off)
Option: Press ◄► to select Mode from Default or Custom. When “Custom” is selected,
use ▲▼ to select the desired controls, ◄► to adjust detailed settings.
29
Downloaded From TV-Manual.com Manuals
English
Restore Default: To restore the factory default settings.
Input Label: To change the input source name.
DCR: To turn on/off the DCR (Dynamic Contrast Ratio 100,000:1) function.
(Except USB source.)
Over Scan: To select this function to On or Off in HDMI1, HDMI2 and HDMI3.(Only available
when input signal is in video timing. Ex:480i, 480p, 720p,1080i, 1080p)
Media: To set the picture slide show setting.(Only available in USB source.(See page 39))
30
Downloaded From TV-Manual.com Manuals
LOCK Menu
—To set up parental control
It is active in all input sources:
English
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
Enter Password: Enter password and the screen below will show. (The default password is
0000.)
Note: Some options will be disabled when in YPbPr, HDMI1, HDMI2, HDMI3, PC and USB source.
Change Password: To change the password, press ►, and the screen on the right appears.
Follow the instructions to change password.
System Lock: Select “On” to enable the following options.
Note: The below options can be enabled only when “On” is selected here.
Unrated Lock: Select “On” to block unrated movies or TV programs. (Only active in TV, AV,
S-Video sources)
Input Block: To set the input source to be blocked.
31
Downloaded From TV-Manual.com Manuals
US: Press ► to set TV or MPAA ratings. (Only active in TV, AV, S-Video sources)
English
TV: To adjust TV blocking level in the US.
The following screen will allow you to customize the following TV ratings:
TV-Y (all children)
TV-PG (guidance suggested)
TV-Y7 (older children)
TV-14 (strongly cautioned)
TV-G (general audience)
TV-MA (mature audience)
You can also customize the TV ratings for the following content:
ALL (All types of content)
S (sexual situations)
FV (fantasy violence)
L (adult language)
V (violence)
D (sexsual dialog)
32
Downloaded From TV-Manual.com Manuals
MPAA: To adjust movie blocking level in the US. You can select between G, PG, PG-13, R,
NC-17, X, or N/A.
English
The movie Ratings in the US are defined as following:
G (general audience)
PG (parental guidance suggested)
PG-13 (recommended for children 14 years
of age or older)
R (mature audience)
NC-17 (no one under 17 years of age)
X (adult audience only)
N/A (Not applicable)
Canada: Press ► to set Canadian English and French ratings. (Only active in TV, AV, S-Video
sources)
33
Downloaded From TV-Manual.com Manuals
Canada Eng: To adjust blocking level in English-speaking region of Canada. You can
select between C, C8+, G, PG, 14+, 18+, EXEMPT.
English
The Canadian English Ratings are defined as following:
C (children)
14+ (viewers and older)
C8+ (children eight years and older)
18+ (adult programming)
G (general programming, suitable for all
EXEMPT
audiences)
PG (parental guidance)
Canada Fre: To adjust blocking level in French-speaking region of Canada. You can
select between G, 8 ans +, 13 ans +, 16 ans +, 18 ans +, EXEMPT.
The Canadian French Ratings are defined as following:
G (genenral)
8 ans+ (children eight years and older)
13 ans+ (not appropriate for children of less
than 13 years)
16 ans+ (not appropriate for children of less
than 16 years)
18 ans+ (reserved to adults)
EXEMPT
RRT Setting: To set Rating Region Table that defines the rating standard for a particular
geographic region and/or country. Press ► to enter the setting. (Depend on DTV signal.)
Reset RRT: Press ► to reset RRT Setting. (Depend on DTV signal.)
34
Downloaded From TV-Manual.com Manuals
CHANNEL Menu
—To set up for TV
Note: The Channel Menu is only active in TV source. When in AV, S-Video, YPbPr, HDMI1, HDMI2,
HDMI3 , PC and USB source, the CHANNEL Menu will not appear.
English
Note: The condition of DTV Signal will only be displayed when source is in DTV.
TV Source: To select Cable or Air as the TV source.
Auto Scan: To auto scan the TV or DTV channels. Select Air or Cable in TV Source option,
and press ► to start auto scanning TV channels. Press MENU again at any time to interrupt
scanning.
35
Downloaded From TV-Manual.com Manuals
Favorite: To set your favorite channels into memory. Press ENTER to confirm / cancel your
favorite channels. Press◄► to go to previous / next page.
English
Show/Hide: Press ENTER to skip the selected channel. To restore the channel, press ENTER
again.
Channel No.: Press ◄► to select a channel. The channel selected will be shown on the
screen at the same time.
36
Downloaded From TV-Manual.com Manuals
Channel Label: Press ► to edit a name for the current channel (the channel selected in
Channel No.). Use ▲▼ to choose letters or signs, ◄► to move forward or backward, and
then press MENU or ENTER to exit.
English
DTV Signal: To display the detected signal strength of the current DTV channel.
37
Downloaded From TV-Manual.com Manuals
USB Source
—To display the USB picture
(only supports JPEG, BMP and PNG image files)
1. When input source is selected to USB, insert the USB device into the USB jack.
symbol).
2. Use ▲ or ▼ to select the folder you want, and press ENTER.
3. Return to main menu, press ▲ or ▼ to ”--“ and press ENTER.
Use ▲ or ▼ to select the image files you want, and press ENTER.
In USB mode, you can use the buttons to make following functions:
Press INFO can view all of the functions.
38
Downloaded From TV-Manual.com Manuals
English
USB only supports JPEG, BMP and PNG image files (With
ŎPress EXIT go back to the previous page.
ŎUse ► or ◄ to display the next or previous picture.
ŎUse ▲ or ▼ to rotate right or rotate left the picture.(Only available in X1.0 mode)
ŎPress ZOOM to zoom in. (X1.5~X4.0)
ŎWhen the Zoom mode, press ▲▼◄► to move.
English
ŎPress ENTER to auto-play or stop the pictures.
In “Option” menu can setup following functions:
Note: The Media function is only active in USB source. When in TV, AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3 and PC source, the Media function will not appear.
1. Press the MENU button to display the OSD main menu.
2. Press ◄ or ► to select “Option” menu, then press ENTER or ▼ to enter the menu.
Press ▲ or▼ to select “Media”, and use ► to enter “Media” setting.
SlideShow Timer: To select the pictures auto-play interval time.
Trans. Effect: To select the auto-play effects of the slide show.
File List Sorting: To select the pictures arrange.
SlideShow Repeat: To select the slide show repeat to On or Off.
39
Downloaded From TV-Manual.com Manuals
TECHNICAL SPECIFICATION
LCD
27” TFT Active Matrix
0.3114 (H) x 0.3114 (V) mm pixel pitch
Color Filter
RGB vertical stripe
Glass surface
Anti-Glare
RGB
RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync,
fh: 30-82 kHz, fv:55-76 Hz
RF
TV system Antenna / NTSC+ATSC
TV Cable system / CATV + Digital Cable
Video
1 composite RCA, 1 S-Video, 1 YPbPr component,
3 HDMI, 1 USB 2.0
Audio
1 mini-stereo, 2 pair of RCA (L/R) stereo
Compatibility
PC
Up to 1920 x 1080 Non-interlaced
Resolution
Recommended
and supported
1920 x 1080 @ 60 Hz
1680 x 1050 @ 60 Hz
1440 x 900 @ 60 Hz
1280 x 1024 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
Input signal
Speaker Output
5W x 2 @THD=10%
Audio Output
1 Headphone jack, 1 stereo RCA jack, 1 SPDIF(optical)
Power
Voltage
100-240 VAC, 50/60 Hz (auto switch)
Display area
Full Scan
597.89 mm (H) x 336.31 mm (V)
23.54” (H) x 13.24” (V)
Operating
conditions
Temperature
32°F to + 104°F ( 0°C to + 40°C)
Humidity
10% to 65% (no condensation)
Altitude
To 6,500 feet (2,000m)
Temperature
-4°F to + 140°F (-20°C to + 60°C)
Humidity
0% to 90% (no condensation)
Altitude
To 40,000 feet (12,000m)
Dimensions
Physical
646.3mm (W) x 465.7mm (H) x 239.5mm (D)
25.44’’ (W) x 18.33’’ (H) x 9.43’’ (D)
Weight
With stand
7.06 kg (15.56 lb)
Without stand
6.67 kg (14.70 lb)
Storage condition
Regulations
Power saving modes
UL/cUL, FCC-B (Doc-B), BETS-7, Energy Star 4.0
On
< 75 W [Max] (blue LED)
Stand by
< 1W @ 115 Vac only (orange LED)
Preset Timing Mode (Pre-adjusted to GTF® 1920 x 1080 @ 60 Hz)
Note: Simultaneously press “MENU” and “CH▼” keys on TV panel to switch between similar PC timings.
Similar PC Timing on list below:
• 640 x 350 @ 70Hz / 640 x 400 @ 70Hz / 720 x 400 @ 70Hz
• 1024 x 768 @ 60, 75Hz / 1280 x 768 @ 60, 75Hz / 1360 x 768 @ 60Hz
• 1680 x 1050 @ 60, 75 Hz / 1400 x 1050 @ 60, 75 Hz
• 1600 x 900 @ 60, 75 Hz / 1440 x 900 @ 60, 75 Hz
Warning: Do not set the graphics card in your computer to exceed these refresh rates;
doing so may result in permanent damage to the LCD TV
Note: Product Specifications are subject to change without notice.
40
Downloaded From TV-Manual.com Manuals
English
Type
SAFETY PRECAUTIONS
This LCD TV is manufactured and tested to insure the user’s safety. Improper use or
installation may result danger to the LCD TV as well as to the user. Carefully go over the
following WARNINGS before installation and keep this guide handy.
English
WARNINGS
This LCD TV should be operated only at the correct power sources indicated on the label on
the rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult
your local dealer or power company.
Do not try to repair the LCD TV yourself as it contains no user-serviceable parts. The LCD TV
should only be repaired by a qualified technician.
Do not remove the LCD TV cabinet. There is high-voltage parts inside that may cause electric
shock. even when the power cord is disconnected .
Stop using the LCD TV if the cabinet is damaged. Have it checked by a service technician.
Put your LCD TV only in a clean, dry environment. Unplug the LCD TV immediately if gets wet
and consult your service technician.
Always unplug the LCD TV before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the glass screen.
Keep the LCD TV away from magnetic objects, motors, TV sets, and transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and
shall be easily accessible.
41
Downloaded From TV-Manual.com Manuals
CARE AND MAINTENANCE
Care
Safety Tips
If smoke, abnormal noise or odor came out of your LCD TV, remove the power cord
immediately and call your service center.
CAUTION-Never remove the rear cover of your LCD TV cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
Never try to repair your LCD TV yourself. Always call your service center or a qualified
technician to fix it.
TROUBLESHOOTING
No power
Make sure A/C power cord is securely connected.
Plug another electrical device into the power outlet to verify that the outlet is supplying proper
voltage.
Power on but no screen image
Make sure the video cable supplied with the TV is tightly secured to the video output port on
back of video source (DVD, VCR…). If not, tightly secure it.
Adjust brightness.
Make sure all signal cables are installed.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
Connect the TV unit to another video source or use another TVs to make sure the video source
was not causing the problem.
42
Downloaded From TV-Manual.com Manuals
English
Avoid exposing your LCD TV directly to sunlight or other heat source.
Place your LCD TV away from the sun to reduce glare.
Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV.
Make certain your LCD TV is installed in a clean and moisture-free area.
Keep your LCD TV away from magnets, motors, transformers, speakers, and TV sets.