raptor® edge system standard | deluxe | variable

Patent Pending
RAPTOR® EDGE SYSTEM
STANDARD | DELUXE | VARIABLE
Surface Prep Super Store
855 East 68th Avenue | Denver CO 80229
Office (303) 426-0006 | (800) 945-4016 | (303) 426-4803 Fax
info@surfaceprepsuperstore.com | www.surfaceprepsuperstore.com
Patent Pending
TABLE OF CONTENTS
Table of Contents………………...…………….......... 1
Congratulations/Important Information.................... 2
Using your Raptor…………………...…………......... 3
Blade Angle Adjustment……………………….......... 4
Blade Height Adjustment………………...……......... 5
Edge Kit……………………………………..…........... 6
Brush Replacement................................................. 7
Raptor Parts Lists ………………...…......……......... 8
Accessories............................................................. 9
Warranty Information…………………......…............ 10
Prices, availability and specifications subject to change without notice.
Retail price does not include freight, taxes, set-up and preparation.
Surface Prep Super Store
855 East 68th Avenue | Denver CO 80229
Office (303) 426-0006 | (800) 945-4016 | (303) 426-4803 Fax
info@surfaceprepsuperstore.com | www.surfaceprepsuperstore.com
[ 1 ]
Patent Pending
RAPTOR® EDGE SYSTEM
Congratulations on your purchase of the Raptor® Edge System!
You have selected an exceptional edge grinder by Surface Prep Super Store. Each component
used in the construction of the Raptor® Edge System was selected to provide you with
superior performance and the highest quality available today. The design of the Raptor® Edge
System makes it easy to use and operate. Please take a few moments to read over the
operating instructions to ensure that you get the best performance from your Raptor® Edge
System and years of trouble-free service.
The Raptor® Edge System is ideal for grinding or polishing concrete, terrazzo, stone, and
masonry or removing paint, thin set, adhesives, VCT, mastic and epoxy floor coatings. Get
right to the edge with the Raptor® Edge System.
WARNING!
PLEASE READ BELOW - IMPORTANT SAFETY INFORMATION
WARNING!
Safety:
Personal protection equipment and proper safety attire should be worn when operating your
Raptor® Edge System. All operators should wear approved safety equipment appropriate for
the job such as hard hat, eye protection and safety shoes. Hearing protection should be used
at all times. Keep loose clothing, hands and feet away from moving parts. Failure to do so
could result in dismemberment or death. Maintain a safe operating distance from flammable
materials, sparks from the cutting-action of this machine can ignite flammable materials
or vapors.
Electric Shock:
Extreme care must be taken when operating the Raptor® Edge System with water present.
Ensure power cord is properly grounded, and is attached to a Ground-Fault-Interrupter (GFI)
outlet. Check all electrical cables and make sure all connections are tight and cable is in good
working condition. Be sure cable is correctly rated for both the operating current and voltage of
this equipment. Improper connection of the equipment can result in a risk of electric shock.
Ordering replacement parts for your Raptor® Edge System:
To order replacements parts, please call our headquarters located in Denver, Colorado, TollFree (800) 945-4016. Part numbers and parts list is on page 8 of this manual. Refer to the
model number and serial number located on the back of your Raptor® Edge System.
Surface Prep Super Store
855 East 68th Avenue | Denver CO 80229
Office (303) 426-0006 | (800) 945-4016 | (303) 426-4803 Fax
info@surfaceprepsuperstore.com | www.surfaceprepsuperstore.com
[ 2 ]
Patent Pending
USING YOUR RAPTOR®
Using the Variable Speed Control Box
L
I
G
H
T
ON
ON
OFF
OFF
G
R
I
N
D
E
R
MEDIUM
USE
TRIM
FAST
SLOW
MED
Trim Speed
For
Polishing
Main Speed
For Grinding
Reset to "0" for Grinding
PUSH TO RESET
OVERLOAD
Using the Variable Speed Control Box
For Grinding:
1. Set trim knob to slow
2. Use main speed knob to adjust high speed between medium and fast
*Different diamond cup wheels perform better at different RPM’s
For Polishing:
1. Set main speed knob pointing toward trim knob
2. Use trim knob to adjust polishing speed
*Caution: Polishing rings can spin off if RPM is set higher than medium
*Does not apply to Standard or Deluxe Models
[ 3 ]
Patent Pending
BLADE ANGLE ADJUSTMENT
Blade Angle Adjustment
Adjusting blade angle:
The Raptor allows you to adjust blade flatness to compensate for different diamond thickness,
different blade heights and polishing ring wear
*Always check blade angle when changing blades
*Always check polishing ring angle when changing from grinding cup wheel to polishing rings.
Level Adjustment
[ 4 ]
Patent Pending
BLADE HEIGHT ADJUSTMENT
Blade Height Adjustment
Adjusting Blade Height:
Shim blade or polishing ring holder between blade and grinder to set height
Keep vacuum dust shroud from contacting floor for longer life and ease of movement
*Grinding cup wheel or polishing ring should set 1/8” below vacuum dust shroud
Cup wheel or polishing ring
should set 1/8" below vacuum
Dust shroud
Shim
Cup Wheel Shim Holder
[ 5 ]
Patent Pending
RAPTOR® EDGE KIT
Raptor® Edge Kit (Optional)
Part Number: REG-01
Edge Kit includes:
Qty 2......Performa non-marking wheels
Qty 2......Should bolts
Qty 1......Mounting bracket and hardware
Front wall guide adjustment:
Front wall guide wheel has adjustments to set distance from wall
Push in one direction at a consistent speed forward at the same time pushing toward the wall
or edge
*With each pass change to a less aggressive diamond for grinding and polishing
Optional Raptor® Edge Kit
Prices, availability and specifications subject to change without notice.
Surface Prep Super Store
855 East 68th Avenue | Denver CO 80229
Office (303) 426-0006 | (800) 945-4016 | (303) 426-4803 Fax
info@surfaceprepsuperstore.com | www.surfaceprepsuperstore.com
[ 6 ]
Patent Pending
RAPTOR® BRUSH REPLACEMENT
Raptor® Brush Replacement
Replacing Brushes in Grinder Motor:
Parts and quantity needed two order brushes for your brand of grinder
Makita® Brush Part Number: REG-26 (31-603-483)
Metabo® Brush Part Number: REG-27 (191957-7)
1. Remove lift bolt with 2 ½" wrenches, this will allow grinder handle to drop below Raptor
body for easy access to brush ports
2. Remove old brushes and replace with new brushes (See Makita® or Metabo® manual for details)
3. After brush replacement, lift grinder handle and replace lift bolt under handle and tighten
MAKITA GA7021
METABO W24-180
Lift Bolt - Brush Access
Surface Prep Super Store
855 East 68th Avenue | Denver CO 80229
Office (303) 426-0006 | (800) 945-4016 | (303) 426-4803 Fax
info@surfaceprepsuperstore.com | www.surfaceprepsuperstore.com
[7]
Patent Pending
RAPTOR® PARTS LIST
Raptor® Parts List
REG-04
Quick Release Pin
REG-08
5/16" Quick Release Ball Joint
REG-09
Lower Lift Lever Assembly
REG-10
Straight Axle No Wheels
REG-11
Axle Shoulder Bolts
REG-12
Lower Lift Lever Shoulder Bolt
REG-13
5/16" Pivot On Lower Lift Lever
REG-14
Lift Link Rod
REG-16
Foam Grip Rear Handle
REG-17
Foam Grip Side Horns/Handles
REG-18
Foam Grip Top Horns/Handles
REG-20
Raptor Grinder Body
REG-25
Grinder Saddle
REG-26
Bushing for Makita Grinder
REG-27
Bushing for Metabo Grinder
REG-28
Saddle Float Spring
REG-29
Saddle and Wrist Shoulder Bolt
REG-30
Yellow Vacuum Hose 17"
REG-31
Swivel Cuff
REG-32
5/16" All Metal Locknut
REG-33
3/8" All Metal Locknut
REG-40
Rear Casters 5" x 1.25" (2)
REG-50
Raptor Decal (2)
SPSS-51
Made in USA Decal
REG-52
Level Adjustment Decal
SPSS-53
Serial Number Decal (Special Order Item)
SPSS-54
Name Plate Decal
REG-55
Caution Decal
GA7021
Makita® 15 AMP Grinder
W24-180
Metabo® 15 AMP Grinder
13650-IAI
Vacuum Dust Shroud
[ 8 ]
Patent Pending
RAPTOR® ACCESSORIES
Raptor® Edge Kit
Part Number: REG-01
Get right to the edge with the Raptor® Edge Kit. Two Performa
wheels guide the Raptor® against the wall. Front Performa
wheel is adjustable
Raptor® Grind Kit
Part Number: REG-01G
Includes 3 of the best diamond cup wheels, Includes one each,
Arrow Seg cup wheel, PCD cup wheel and T-Seg cup wheel.
Raptor® Polish Kit
Part Number: REG-01P
Includes one each, 120 grit metal-bond cup wheel, 30 grit semimetal diamond ring, 50 grit semi-metal diamond ring, 100 grit
semi-metal diamond rings, 220 grit diamond ring, 400 grit diamond ring, 800 grit diamond grit, 1500 grit diamond ring, 3000 grit
diamond ring plus 7" rubber backer pad.
Raptor® Grind & Polish Kit
Part Number: REG-02G/P
Includes 3 of the best diamond cup wheels, T-Seg diamond cup
wheel, Arrow diamond cup wheel, PCD diamond cup wheel, complete set of 7” diamond rings, 100 grit, 200 grit, 400 grit, 800grit,
1500 grit, 3000 grit and 7” Velcro® flexible backer
Prices, availability and specifications subject to change without notice.
Surface Prep Super Store
855 East 68th Avenue | Denver CO 80229
Office (303) 426-0006 | (800) 945-4016 | (303) 426-4803 Fax
info@surfaceprepsuperstore.com | www.surfaceprepsuperstore.com
[ 9 ]
Patent Pending
RAPTOR® WARRANTY
Raptor® Warranty
Raptor® body assembly
Six month warranty on Raptor® body assembly against manufacturing defects*
*Normal wear and abuse are not covered
Electrical Control Boxes: #100, #101, #102, #200, #201, #202
One Year Warranty against manufacturing defects*
*Normal wear and abuse are not covered
Makita GA7021 Grinder
One Year Warranty against manufacturing defects* (see manufacturers warranty)
*Normal wear and abuse are not covered
Metabo W24-180 Grinder
One Year Warranty against manufacturing defects* (see manufacturers warranty)
*Normal wear and abuse are not covered
Surface Prep Super store warrants that each new Raptor® Edge System to be free from
defects in material and workmanship in normal use and service for a period (180) one
hundred, eighty days from date of shipment to the original retail owner. Accessories or
equipment furnished and installed on the Raptor® Edge System but manufactured by
others, including, but not limited to grinder motor, light fixture, electrical components, etc,
shall carry the accessory manufacturers own warranty. Surface Prep Super Store will, at
its option, repair or replace, any part which shall appear to the defective in material or
workmanship.
Surface Prep Super Store
855 East 68th Avenue | Denver CO 80229
Office (303) 426-0006 | (800) 945-4016 | (303) 426-4803 Fax
info@surfaceprepsuperstore.com | www.surfaceprepsuperstore.com
[ 10 ]
Patent Pending
RAPTOR® EDGE SYSTEM
MID-WEST
NORTH-WEST
WEST-COAST
Surface Prep Super Store
855 E. 68th Avenue
Denver, Colorado 80229
Monday thru Friday
8:00 A.M. to 5:00 P.M.
Surface Prep Super Store
7014 South 220th, #5
Kent, Washington 98032
Monday thru Friday
8:00 A.M. to 5:00 P.M.
Surface Prep Super Store
1180 East Francis Street
Ontario, California 91761
Monday thru Friday
8:00 A.M. to 5:00 P.M.
Closed Weekends & Holidays
Closed Weekends & Holidays
Closed Weekends & Holidays
(800) 945-4016
(800) 964-6006
(877) 995-9006