KPC-1210
12.1”Fanless Panel PC w/
Dual Core Intel® Atom™ Processor D2550
User’s Guide
KPC-1210 User’s Manual
I
Contact Info:
Quanmax Inc.
5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District,
Taipei, Taiwan 114
Tel: +886-2-2799-2789
Fax: +886-2-2799-7399
Visit our site at:
www.quanmax.com
© 2012 Quanmax Inc. All rights reserved.
The information in this user’s guide is provided for reference only. Quanmax does not assume any
liability arising out of the application or use of the information or products described herein. This user’s
guide may contain or reference information and products protected by copyrights or patents and does
not convey any license under the patent rights of Quanmax, nor the rights of others. Quanmax is a
registered trademark of Quanmax. All trademarks, registered trademarks, and trade names used in
this user’s guide are the property of their respective owners. All rights reserved. This user’s guide
contains information proprietary to Quanmax. Customers may reprint and use this user’s guide in other
publications. Customers may alter this user’s guide and publish it only after they remove the Quanmax
name, cover, and logo. Quanmax reserves the right to make changes without notice in product or
component design as warranted by evolution in user needs or progress in engineering or
manufacturing technology. Changes which affect the operation of the unit will be documented in the
next revision of this user’s guide.
KPC-1210 User’s Manual
II
Content
Content
Content....................................................................................................................... 3
Figures & Tables......................................................................................................... 4
Safety Instructions ...................................................................................................... 5
Before You Begin .................................................................................. 5
When Working Inside a Computer ........................................................ 5
Preventing Electrostatic Discharge ....................................................... 6
Instructions for Lithium Battery ............................................................. 7
Preface ....................................................................................................................... 8
How to Use This Guide ......................................................................... 8
Unpacking ............................................................................................. 8
Regulatory Compliance Statements ...................................................... 8
Warranty Policy ..................................................................................... 9
Maintaining Your Computer................................................................. 10
Chapter 1 Introduction ........................................................................................... 13
Overview ............................................................................................. 13
Product Specifications ........................................................................ 14
System tour......................................................................................... 15
Mechanical Dimensions ...................................................................... 17
Chapter 2 Getting Started ...................................................................................... 18
Setting up your PC .............................................................................. 18
VESA Mounting................................................................................... 22
Panel Mounting ................................................................................... 23
Chapter 3 AMI BIOS Setup.................................................................................... 25
Overview ............................................................................................. 25
Main Menu .......................................................................................... 26
Advanced Menu .................................................................................. 27
Boot Menu .......................................................................................... 35
Security Menu ..................................................................................... 36
Save & Exit Menu ............................................................................... 36
Chapter 4 Driver Installation .................................................................................. 38
KPC-1210 User’s Manual
3
Figures & Tables
Figures & Tables
Figure 1 I/Os .............................................................................................. 15
Figure 2 Mechanical Dimensions ............................................................... 17
Figure 3 DP/ VGA/ HDMI ........................................................................... 18
Figure 4 Connect USB mouse & keyboard ................................................ 19
Figure 5 RJ45 connector ............................................................................ 19
Figure 6 COM ports ................................................................................... 20
Figure 7 Turning on the system ................................................................. 21
Figure 8 VESA Mounting Hole Locations ................................................... 22
Figure 9 Panel Mount Cut-out hole and maximum panel thickness ........... 23
Figure 10 Panel Mounting .......................................................................... 24
Table 1 KPC-1210 product specifications .................................................. 14
Table 2 BIOS Main Menu ........................................................................... 26
Table 3 Advanced Menu ............................................................................. 27
Table 4 Advanced Menu – Display Configuration ....................................... 28
Table 5 Advanced Menu –Power Management Configuration.................... 29
Table 6 Advanced Menu –CPU Advanced Configuration ........................... 30
Table 7 Advanced Menu –SATA Configuration ........................................... 31
Table 8 Advanced Menu –USB Configuration ............................................ 31
Table 9 Advanced Menu – Super IO Configuration .................................... 32
Table 10 Advanced Menu – Super IO Configuration – Serial Port 1
Configuration ............................................................................... 32
Table 11 Advanced Menu – Super IO Configuration – Serial Port 2
Configuration ............................................................................... 33
Table 12 Advanced Menu –H/W Monitor .................................................... 34
Table 13 Boot Menu ................................................................................... 35
Table 14 Security Menu ............................................................................. 36
Table 15 Save & Exit Menu ........................................................................ 36
KPC-1210 User’s Manual
4
Safety Instructions
Safety Instructions
 Before You Begin
Before handling the product, read the instructions and safety guidelines on the
following pages to prevent damage to the product and to ensure your own personal
safety. Refer to the “Advisories” section in the Preface for advisory conventions used
in this user’s guide, including the distinction between Warnings, Cautions, Important
Notes, and Notes.



Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the
interior of a computer. The power supplies produce high voltages and
energy hazards, which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures.
If you have any questions, please contact Quanmax Post-Sales Technical
Support.
Access can only be gained by service persons or by users who have
been instructed about the reasons for the restrictions applied to the
location and about any precautions that shall be taken; and access is
through the use of a tool or lock and key, or other means of security,
and is controlled by authority responsible for the location.
WARNING
High voltages are present inside the chassis when the unit’s power cord is plugged into
an electrical outlet. Turn off system power, turn off the power supply, and then
disconnect the power cord from its source before removing the chassis cover. Turning off
the system power switch does not remove power to components.
 When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.
KPC-1210 User’s Manual
5
Safety Instructions
2.
3.
4.
Disconnect the computer and peripherals from their power sources or
subsystems to prevent electric shock or system board damage. This does not
apply when hot swapping parts.
Follow the guidelines provided in “Preventing Electrostatic Discharge” on the
following page.
Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
 To help avoid possible damage to system boards, wait five seconds after
turning off the computer before removing a component, removing a system
board, or disconnecting a peripheral device from the computer.
 When you disconnect a cable, pull on its connector or on its strain-relief loop,
not on the cable itself. Some cables have a connector with locking tabs. If you
are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cable. As you pull connectors apart, keep them evenly
aligned to avoid bending any connector pins. Also, before connecting a cable,
make sure both connectors are correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in this user’s guide.
Follow installation and troubleshooting instructions closely.
 Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation
and follow proper ESD procedure to reduce the risk of damage to components.
Quanmax strongly encourages you to follow proper ESD procedure, which can
include wrist straps and smocks, when servicing equipment.
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
 When unpacking a static-sensitive component from its shipping carton, do not
remove the component’s antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any
static electricity that may have built up in your body.
 When transporting a sensitive component, first place it in an antistatic container
or packaging.
KPC-1210 User’s Manual
6
Safety Instructions



Handle all sensitive components at an ESD workstation. If possible, use
antistatic floor pads and workbench pads.
Handle components and boards with care. Don’t touch the components or
contacts on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.
 Instructions for Lithium Battery
WARNING
Danger of explosion when battery is replaced with incorrect type. Only replace
with the same or equivalent type recommended by the manufacturer.
Do not dispose of lithium batteries in domestic waste. Dispose of the battery
according to the local regulations dealing with the disposal of these special
materials (e.g. to the collecting points for disposal of batteries)
KPC-1210 User’s Manual
7
Preface
Preface
 How to Use This Guide
This guide is designed to be used as step-by-step instructions for installation, and as
a reference for operation, troubleshooting, and upgrades.
NOTE
Driver downloads and additional information are available under Downloads on
our web site: www.quanmax.com.
 Unpacking
When unpacking, follow these steps:
1. After opening the box, save it and the packing material for possible future
shipment.
2. Remove all items from the box. If any items listed on the purchase order
are missing, notify Quanmax customer service immediately.
3. Inspect the product for damage. If there is damage, notify Quanmax
customer service immediately. Refer to “Warranty Policy” for the return
procedure.
 Regulatory Compliance Statements
This section provides the FCC compliance statement for Class A devices.
FCC Compliance Statement:
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reason able protection against harmful interference in residential installations. This
equipment generates, uses, and can radiate radiofrequency energy, and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
KPC-1210 User’s Manual
8
Preface
interference to radio or television equipment reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Quanmax could void the user's
authority to operate the equipment.
NOTE
The assembler of a personal computer system may be required to test the system
and/or make necessary modifications if a system is found to cause harmful
interference or to be noncompliant with the appropriate standards for its intended use.
 Warranty Policy
Limited Warranty
Quanmax Inc.’s detailed Limited Warranty policy can be found under Support at
www.quanmax.com. Please consult your distributor for warranty verification.
The limited warranty is void if the product has been subjected to alteration, neglect,
misuse, or abuse; if any repairs have been attempted by anyone other than
Quanmax or its authorized agent; or if the failure is caused by accident, acts of God,
or other causes beyond the control of Quanmax or the manufacturer. Neglect,
misuse, and abuse shall include any installation, operation, or maintenance of the
product other than in accordance with the user’s guide.
No agent, dealer, distributor, service company, or other party is authorized to change,
modify, or extend the terms of this Limited Warranty in any manner whatsoever.
Quanmax reserves the right to make changes or improvements in any product
without incurring any obligation to similarly alter products previously purchased.
Return Procedure
For any Limited Warranty return, please contact Support at www.quanmax.com and
login to obtain a Return Material Authorization (RMA) Number. If you do not have an
KPC-1210 User’s Manual
9
Preface
account, send an email to support@quanmax.com to apply for one.
All product(s) returned to Quanmax for service or credit must be accompanied by a
Return Material Authorization (RMA) Number. Freight on all returned items must be
prepaid by the customer who is responsible for any loss or damage caused by
common carrier in transit. Returns for Warranty must include a Failure Report for
each unit, by serial number(s), as well as a copy of the original invoice showing the
date of purchase.
To reduce risk of damage, returns of product must be in a Quanmax shipping
container. If the original container has been lost or damaged, new shipping
containers may be obtained from Quanmax Customer Service at a nominal cost.
Quanmax owns all parts removed from repaired products. Quanmax uses new and
reconditioned parts made by various manufacturers in performing warranty repairs
and building replacement products. If Quanmax repairs or replaces a product, its
warranty term is not extended.
Shipments not in compliance with this Limited Warranty Return Policy will not be
accepted by Quanmax.
Limitation of Liability
In no event shall Quanmax be liable for any defect in hardware, software, loss, or
inadequacy of data of any kind, or for any direct, indirect, incidental, or
consequential damages in connection with or arising out of the performance or use
of any product furnished hereunder. Quanmax’s liability shall in no event exceed the
purchase price of the product purchased hereunder. The foregoing limitation of
liability shall be equally applicable to any service provided by Quanmax or its
authorized agent.
 Maintaining Your Computer
Environmental Factors

Temperature
The ambient temperature within an enclosure may be greater than room
ambient temperature. Installation in an enclosure should be such that the
amount of air flow required for safe operation is not compromised.
Consideration should be given to the maximum rated ambient temperature.
Overheating can cause a variety of problems, including premature aging and
failure of chips or mechanical failure of devices.
If the system has been exposed to abnormally cold temperatures, allow a
two-hour warm-up period to bring it up to normal operating temperature before
KPC-1210 User’s Manual
10
Preface
turning it on. Failure to do so may cause damage to internal components,
particularly the hard disk drive.

Humidity
High-humidity can cause moisture to enter and accumulate in the system. This
moisture can cause corrosion of internal components and degrade such
properties as electrical resistance and thermal conductivity. Extreme moisture
buildup inside the system can result in electrical shorts, which can cause
serious damage to the system.
Buildings in which climate is controlled usually maintain an acceptable level of
humidity for system equipment. However, if a system is located in an unusually
humid location, a dehumidifier can be used to maintain the humidity within an
acceptable range. Refer to the “Specifications” section of this user’s guide for
the operating and storage humidity specifications.
Power Protection
The greatest threats to a system’s supply of power are power loss, power spikes,
and power surges caused by electrical storms, which interrupt system operation
and/or damage system components. To protect your system, always properly
ground power cables and one of the following devices.

Surge Protector
Surge protectors are available in a variety of types and usually provide a level
of protection proportional with the cost of the device. Surge protectors prevent
voltage spikes from entering a system through the AC power cord. Surge
protectors, however, do not offer protection against brownouts, which occur
when the voltage drops more than 20 percent below the normal AC line voltage
level.

Line Conditioner
Line conditioners go beyond the overvoltage protection of surge protectors.
Line conditioners keep a system’s AC power source voltage at a fairly constant
level and, therefore, can handle brownouts. Because of this added protection,
line conditioners cost more than surge protectors. However, line conditioners
cannot protect against a complete loss of power.

Uninterruptible Power Supply
Uninterruptible power supply (UPS) systems offer the most complete protection
KPC-1210 User’s Manual
11
Preface
against variations on power because they use battery power to keep the server
running when AC power is lost. The battery is charged by the AC power while it
is available, so when AC power is lost, the battery can provide power to the
system for a limited amount of time, depending on the UPS system.
UPS systems range in price from a few hundred dollars to several thousand
dollars, with the more expensive unit s allowing you to run larger systems for a
longer period of time when AC power is lost. UPS systems that provide only 5
minutes of battery power let you conduct an orderly shutdown of the system,
but are not intended to provide continued operation. Surge protectors should be
used with all UPS systems, and the UPS system should be Underwriters
Laboratories (UL) safety approved.
KPC-1210 User’s Manual
12
Chapter 1
Chapter 1
Introduction
 Overview
The KPC-1210 is a Fanless Industrial Panel PC with 12.1” TFT LCD touch screen
display. Specifically designed for fanless, cost effective applications, the KPC-1210
is equipped with an Intel® Atom™Processor D2550 (1M Cache, 1.86 GHz), 2.5”
SATA HDD or SSD space, 2x GbE LAN, 3x USB 2.0, 2x COM, Audio and VGA
out,1x HDMI, 1x DP.
The KPC series provide a compact, high performance human-machine interface,
with optimal shock, vibration and temperature resistance for tough industrial
demands.
Checklist







KPC-1210
Power Adapter
Power Cord
Driver CD
Quick installation Guide
Optional VESA Mounting Kit
Optional wireless LAN
Features

12.1” LCD Display with 1024x768 resolution







Intel® Atom™ Processor D2550 / Intel® NM10 Express chipset
Intel® Graphics Media Accelerator 3650
DDR3 800/1066MHz memory support up to 4GB
1x HDMI, 1x DP, 1x VGA
3x USB2.0, 2x COM, 2x GbE LAN, 1xSATA
1x Mini-PCIe slot supported
Fanless design
KPC-1210 User’s Manual
13
Chapter 1
 Product Specifications
CPU Support
Intel® Atom™ Processor D2550 (1M Cache, 1.86 GHz)
Chipset
®
Intel NM10 Express chipset
Memory
1x Single Channel DDR3 800/1066MHz SODIMM support (4GB max)
BIOS
AMI Plug & Play SPI BIOS
Graphic
®
Intel Graphics Media Accelerator 3650
LCD Display
Size: 12.1inch, 4:3
Resolution: 1024 x 768
Backlight: LED
Contrast Ratio: 1000:1 (typical)
2
Brightness: 500cd/m (typical)
Touch Sensor
5-wire resistive touch sensor
External Display
1x HDMI
1x Display Port
1x VGA
LAN
2x Gigabit Ethernet (Realtek RTL8111E)
PXE/WOL supported
Audio
Realtek ALC662 HD Codec w/ 2W Audio Amplifier
Mic-In, Line-In, Line-Out Supported
Storage
1x 2.5” SATA HDD or SSD space
USB
3XUSB 2.0
COM
2x COM ports with RS-232/422/485 selection supported
Expansion slot
1x Mini-PCIe slot
Hardware Monitor
Operating voltage, CPU temperature
Watchdog Timer
1-255 step, can be set with software on Super I/O
Power
DC 12V Input
OS Support
Windows 7
Dimensions
343 x 269 x 33 mm (W x D x H)
Environment
Operation Temp: 0ºC - 50ºC
Storage Temp.: -20ºC - 60ºC
Humidity: 0% - 95%
Certification
CE, FCC Class A
Table 1 KPC-1210 product specifications
KPC-1210 User’s Manual
14
Chapter 1
 System tour
Refer to the diagrams below to identify the components of the system.
 I/Os
Figure 1 I/Os
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mouse devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with some peripheral
acting as additional plug-in sites or hubs.
Power Switch
The power switch allows powering ON and OFF the system.
Ethernet
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for
connection to a local network.
Power Jack
The supplied power adapter converts AC power to DC for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage
to the PC, always use the supplied power adapter.
KPC-1210 User’s Manual
15
Chapter 1
DP
DP is a display interface used to connect a video source to a display device such as
a computer monitor or a television set.
HDMI
HDMI connector for display output
VGA
D-Sub 15 pin VGA connector for display output
COM
D-Sub 9 pin connector for RS-232/422/485 connection
Line Out
The stereo headphone jack is used to connect the system’s audio out signal to
amplified speakers or headphones.
MIC-IN
The microphone jack is designed to connect the microphone used for video
conferencing, voice narrations, or simple audio recordings.
Line-IN
The Line-in jack is designed to take input from a higher-powered sound source.
KPC-1210 User’s Manual
16
Chapter 1
Mechanical Dimensions
343 x 269 x 33 mm (W x D x H)
Figure 2 Mechanical Dimensions
KPC-1210 User’s Manual
17
Chapter 2
Chapter 2
Getting Started
 Setting up your PC
 Connecting the monitor
Connect the DP/ VGA/ HDMI cable from your display to the DP/ VGA/ HDMI port.
VGA
HDMI
DP
Figure 3 DP/ VGA/ HDMI
KPC-1210 User’s Manual
18
Chapter 2
 Connecting USB mouse & keyboard
Your KPC-1210 does not come with a keyboard and mouse, but you can use any
USB keyboard or mouse with your computer.
USB
USB
Figure 4 Connect USB mouse & keyboard
NOTE
Using a third-party USB mouse or keyboard may require software drivers.
Check the manufacturer’s website for the latest software drivers.
 Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel
and the other end to a hub or switch.
RJ45
Figure 5 RJ45 connector
KPC-1210 User’s Manual
19
Chapter 2
 COM ports
COM ports with the pin definitions.
COM 1
COM 2
COM1--RS-232/422/485 Port DB-9
Half Duplex
Full Duplex
RS-485
RS-485
TX-
DATA-
TX-
RXD
RX+
NA
RX+
3
TXD
TX+
DATA+
TX+
4
DTR
RX-
NA
RX-
5
GND
GND
GND
GND
6
DSR
NA
NA
NA
7
RTS
NA
NA
NA
8
CTS
NA
NA
NA
9
RI
NA
NA
NA
Pin
RS-232
RS-422
1
DCD
2
COM2 --RS-232/422/485 Port 2 D-SUB 9P
TXRX+
TX+
RXGND
N/A
N/A
N/A
Half Duplex
RS-485
DATAN/A
DATA+
N/A
GND
N/A
N/A
N/A
Full Duplex
RS-485
TXRX+
TX+
RXGND
N/A
N/A
N/A
RI
RI
RI
Pin
RS-232
RS-422
1
2
3
4
5
6
7
8
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
9
RI
Figure 6 COM ports
KPC-1210 User’s Manual
20
Chapter 2
 Turning on the system
1.
2.
3.
Connect the supplied AC power cord to the system AC power inlet on the I/O
panel of the system.
Connect the other end of the AC power cord to a corresponding outlet.
Press the power switch to turn on the system
DC jack
On/ Off
Figure 7 Turning on the system
KPC-1210 User’s Manual
21
Chapter 2
 VESA Mounting
The product comes with VESA FDMI 100 standard mounting holes as shown below.
Use 4 screws with the appropriate length for your mounting bracket.
Figure 8 VESA Mounting Hole Locations
NOTE
To fasten the metal shelf, your monitor must comply with VESA100
standard. The VESA mounting kit is optional.
KPC-1210 User’s Manual
22
Chapter 2
 Panel Mounting
The Panel PC can be panel mounted and comes with brackets and screws for this
purpose. The required cutout for panel mounting and maximum panel thickness is
shown below.
Figure 9 Panel Mount Cut-out hole and maximum panel thickness
KPC-1210 User’s Manual
23
Chapter 2

Below are the demonstrations of how to do panel mounting.
Step1
Tightening the screws as shown
right.
Step2
Done
Figure 10 Panel Mounting
KPC-1210 User’s Manual
24
Chapter 3
Chapter 3
AMI BIOS Setup
 Overview
This chapter provides a description of the AMI BIOS. The BIOS setup menus and
available selections may vary from those of your product. For specific information on
the BIOS for your product, please contact Quanmax.
NOTE: The BIOS menus and selections for your product may vary from
those in this chapter. For the BIOS manual specific to your product, please
contact Quanmax
AMI's ROM BIOS provides a built-in Setup program, which allows the user to modify
the basic system configuration and hardware parameters. The modified data will be
stored in a battery-backed CMOS, so that data will be retained even when the power
is turned off. In general, the information saved in the CMOS RAM will not need to
be changed unless there is a configuration change in the system, such as a hard
drive replacement or when a device is added.
It is possible for the CMOS battery to fail, which will cause data loss in the CMOS
only. If this happens you will need to reconfigure your BIOS settings.
KPC-1210 User’s Manual
25
Chapter 3
 Main Menu
The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test
(POST) memory test begins and before the operating system boot begins. Once you
enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main
Menu provides System Overview information and allows you to set the System Time
and Date. Use the “<” and “>” cursor keys to navigate between menu screens.
Table 2 BIOS Main Menu
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
Exit
Product Information
Product Name
KPC-1210
BIOS Version
0.07
BIOS Build Date
02/10/2012
CPU Information
Intel® Atom™ CPU D2550 @1.86GHz
Microcode Revision
10C
Processor Cores
2
  Select Screen
Memory Information
↑↓ Select Item
Total Size
2048 MB
Frequency
1067 MHz
(DDR3)
System date
[Mon 08/01/2011]
System time
[00:13:19]
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
KPC-1210 User’s Manual
26
Chapter 3
 Advanced Menu
Table 3 Advanced Menu
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Server
Onboard LAN1 Controller
[Enabled]
Onboard LAN1 Boot
[Disabled]
Onboard LAN2 Controller
[Enabled]
Onboard LAN2 Boot
[Disabled]
Audio Controller
[Enabled]
> Display Configuration
> Power Management Configuration
Mgmt
Save
& Exit
  Select Screen
> CPU Advanced Configuration
> SATA Configuration
> USB Configuration
> Super IO Configuration
> H/W Monitor
↑↓ Select Item
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Onboard LAN 1 Controller
Options: Disabled, Enabled
Onboard LAN 1 Boot
Options: Disabled, Enabled
Onboard LAN 2 Controller
Options: Disabled, Enabled
Onboard LAN 2 Boot
Options: Disabled, Enabled
Audio Controller
Options: Disabled, Enabled
KPC-1210 User’s Manual
27
Chapter 3
Table 4 Advanced Menu – Display Configuration
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Server
Mgmt
Save
& Exit
Display Configuration
Fixed Graphics Memory Size
IGFX – Boot Type
[128 MB]
[VBIOS Default]
Active LFP
[ Int-LVDS]
LCD Panel Color
[18 Bit]
LCD Panel Type
LVDS Backlight Control – Voltage
[1024X768 18Bit 1CH]
[2.5V]
  Select Screen
↑↓ Select Item
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Fixed Graphics Memory Size
Options: 128MB, 256MB
IGFX – Boot Type
Options: VBIOS Default, CRT, DP, HDMI
LVDS Backlight Control – Voltage
Options: 0.0V, 0.5V, 1.0V, 1.5V, 2.0V, 2.5V, 3.0V, 3.5V, 4.0V, 4.5V, 5.0V
KPC-1210 User’s Manual
28
Chapter 3
Table 5 Advanced Menu –Power Management Configuration
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Server
Mgmt
Save
& Exit
Power Management Configuration
ACPI Sleep State
[S3 (Suspend to RAM)]
Restore AC Power Loss
Resume By PCIE Device
Resume By RTC Alarm
[Power Off]
[Disabled]
[Disabled]
EUP Power Saving Mode
[Disabled]
>Watchdog Timer Configuration
  Select Screen
↑↓ Select Item
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
ACPI Sleep State
Options: Suspend Disabled, S1 (CPU Stop Clock), S3 (Suspend to RAM)
Restore AC Power Loss
Options: Power Off, Power On, Last State
Resume By PCIE Device
Options: Disabled, Enabled
Resume By RTC Alarm
Options: Disabled, Enabled
EUP Power Saving Mode
Options: Disabled, Enabled
Watchdog Timer Configuration
■ WDT Function
Options: Disabled, Enabled
KPC-1210 User’s Manual
29
Chapter 3
Table 6 Advanced Menu –CPU Advanced Configuration
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
CPU Advanced Configuration
Hyper-Treading
[Enabled]
Execute Disable Bit
[Enabled]
Limit CPUID Maximum
EIST
[Disabled]
[Enabled]
  Select Screen
↑↓ Select Item
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Hyper-Treading
Options: Disabled, Enabled
Execute Disable Bit
Options: Disabled, Enabled
Limit CPUID Maximum
Options: Disabled, Enabled
EIST
Options: Disabled, Enabled
KPC-1210 User’s Manual
30
Exit
Chapter 3
Table 7 Advanced Menu –SATA Configuration
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
Exit
  Select Screen
[ AHCI ]
↑↓ Select Item
Configure SATA as
SATA Port 1
SATA Port 2
TOSHIBA MK8046 (80.0G)
Not Present
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Configure SATA as
Options: IDE, AHCI
Table 8 Advanced Menu –USB Configuration
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
USB Configuration
Save
&
.
USB Devices:
  Select Screen
1 Drive, 1 Keyboard, 1 Mouse
Legacy USB Support
[Enabled]
↑↓ Select Item
EHCI Hand-off
[Disabled]
Enter: Select
Mass Storage Devices:
San Disk
+- Change Opt.
[Auto]
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Legacy USB Support
Options: Disabled, Enabled, Auto
EHCI hand-off
Options: Disabled, Enabled
Mass Storage Device
Options: Auto, Floppy, Forced FDD, Hard Disk, CD-ROM
KPC-1210 User’s Manual
31
Exit
Chapter 3
Table 9 Advanced Menu – Super IO Configuration
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
Exit
  Select Screen
Super IO Configuration
↑↓ Select Item
>Serial Port 1 Configuration
>Serial Port 2 Configuration
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Table 10 Advanced Menu – Super IO Configuration – Serial Port 1 Configuration
BIOS SETUP UTILITY
Main
Ad v a n c e d
Boot
Chipset
Power
Security
: Select Screen
Serial Port 1 Configuration
↑↓: Select Item
Serial Port
[Enabled]
Enter: Select
Device Settings
IO=3F8h ; IRQ=4;
+/-: Change Opt.
F1: General Help
Change Settings
[Auto]
F2: Previous Values
Serial Port 1 Type
[RS232]
F3: Optimized Defaults
F4: Save and Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Serial Port
Options: Disabled, Enabled
Change Settings
Options: Auto,
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
Serial Port Type
Options: RS232, RS422, RS485
KPC-1210 User’s Manual
32
Exit
Chapter 3
Table 11 Advanced Menu – Super IO Configuration – Serial Port 2 Configuration
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
Serial Port 2 Configuration
Serial Port
Device Settings
[Enabled]
IO=2F8h; IRQ=3;
  Select Screen
Change Settings
Serial Port 2 Type
[Auto]
[RS232]
↑↓ Select Item
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Serial Port
Options: Disabled, Enabled
Change Settings
Options: Auto,
IO=2F8h; IRQ=3;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12
Serial Port 2 Type
Options: RS232, RS422, RS485
KPC-1210 User’s Manual
33
Exit
Chapter 3
Table 12 Advanced Menu –H/W Monitor
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
PC Health Status
CPU Warning Temperature
[Disabled]
CPU Temperature
: +41 C
: +36 C
SYS Temperature
  Select Screen
↑↓ Select Item
+3.3V
+VCORE
+VGFX
+1.05V
+1.5V
+5VDUAL
+VIN
+3.3VSB
: +3.344 V
: +1.192 V
: +1.008 V
: +1.064 V
: +1.517V
: +5.120V
: +12.144 V
: +3.360 V
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
CPU Warning Temperature
Options: Disabled, 80 ºC, 85 ºC, 90 ºC, 95 ºC
KPC-1210 User’s Manual
34
Exit
Chapter 3
 Boot Menu
Table 13 Boot Menu
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
Boot Configuration
Full Screen LOGO Display
[Disabled]
Setup Prompt Timeout
Bootup NumLock State
1
[On]
Boot Option Priorities
  Select Screen
Boot Option #1
Boot Option#2
Hard Drive BBS Priorities
[UEFI: SanDisk]
[SATA PM: TOSHIBA…]
↑↓ Select Item
Enter: Select
+- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Full Screen LOGO Display
Options: Disabled, Enabled
Bootup Numlock State
Options: On, Off
Boot Option #1
Options: UEFI, SATA PM: Disabled
Boot Option #2
Options: UEFI, SATA PM: Disabled
Hard Drive BBS Priorities
■ Boot Option #1
Options: UEFI, SATA PM: Disabled
■ Boot Option #2
Options: UEFI, SATA PM: Disabled
KPC-1210 User’s Manual
35
Exit
Chapter 3
 Security Menu
Table 14 Security Menu
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
&
Exit
Password Description
If ONLY the Administrator’s password is set, then this only limits access to
Setup and is only asked for when entering Setup
  Select Screen
If ONLY the User’s password is set, then this is a power on password and
must be entered to boot or enter Setup. In Setup the User will have
Administrator rights
↑↓ Select Item
The password length must be in the following range:
+- Change Opt.
Minimum Length
F1: General Help
Maximum length
F2: Previous Values
Enter: Select
F3: Optimized Defaults
Administrator Password
F4 Save & Exit
User Password
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
 Save & Exit Menu
Table 15 Save & Exit Menu
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Save
& Exit
Save Changes and Reset
  Select Screen
Discard Changes and Reset
↑↓ Select Item
Enter: Select
Save Options
+- Change Opt.
Save Changes
F1: General Help
Discard Changes
F2: Previous Values
F3: Optimized Defaults
Restore Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
KPC-1210 User’s Manual
36
Chapter 3
Save Changes and Exit
Exit system setup after saving the changes. Once you are finished making your
selections, choose this option from the Exit menu to ensure the values you selected
are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup
battery and stays on even when the PC is turned off. When you select this option, a
confirmation window appears. Select [Yes] to save changes and exit.
Discard Changes and Exit
Exit system setup without saving any changes. Select this option only if you do not
want to save the changes that you made to the Setup program. If you made changes
to fields other than system date, system time, and password, the BIOS asks for a
confirmation before exiting.
Discard Changes
Discards changes done so far to any of the setup values. This option allows you to
discard the selections you made and restore the previously saved values. After
selecting this option, a confirmation appears. Select [Yes] to discard any changes and
load the previously saved values.
Load Optimal Defaults
Load Optimal Default values for all the setup values. This option allows you to load
optimal default values for each of the parameters on the Setup menus, which will
provide the best performance settings for your system. The F9 key can be used for
this operation.
Load Failsafe Defaults
Load Optimal Default values for all the setup values. This option allows you to load
failsafe default values for each of the parameters on the Setup menus, which will
provide the most stable performance settings. The F8 key can be used for this
operation.
KPC-1210 User’s Manual
37
Chapter 4
Chapter 4
Driver Installation
If your KPC-1210 does not come with an operating system pre-installed, you will
need to install an operating system and the necessary drivers to operate it. After you
have finished assembling your system and connected the appropriate power source,
power it up using the power supply and install the desired operating system.
You can download the drivers for the KPC-1210 from the Quanmax website
at www.quanmax.com and install as instructed there. For other operating systems,
please contact Quanmax.
KPC-1210 User’s Manual
38