MVME2600
VME Processor Modules
♦ PowerPC 603™ or PowerPC 604™ 32-bit
microprocessor
♦ L1 cache—16KB/16KB on PowerPC 603,
32KB/32KB on PowerPC 604
♦ 256KB L2 cache
♦ Up to 512MB ECC DRAM using RAM200
memory expansion modules
♦ 8MB on-board Flash, 1MB socketed
♦ 64-bit PCI mezzanine connector
♦ On-board debug monitor with self-test
diagnostics
♦ IEEE P1386.1 compatible 32/64-bit PMC
expansion slot
♦ 2 or 3 async, 1 or 2 sync/async serial
ports
♦ Ethernet transceiver interface with 32-bit
PCI local bus DMA
♦ 8- or 16-bit Fast SCSI-2 bus interface
♦ Parallel, floppy, keyboard and mouse
interfaces
♦ 8KB x 8 NVRAM and time-of-day clock
with replaceable battery backup
♦ Four 32-bit timers, one watchdog timer
PMC expansion combined with a high-performance VME processor
The MVME2600 Series is a family of VME processor modules based on the
Motorola PowerPlus VME architecture with PowerPC® microprocessors that
push performance and functionality to limits unprecedented on VME. The
flexibility of the MVME2600 provides an excellent base platform that can be
quickly and easily customized for a variety of industry-specific applications.
Designed to meet the needs of military and aerospace, industrial automation,
and medical, MVME2600 applies to a variety of applications. DRAM expansion mezzanines enable memory upgrades to the maximum 512MB of ECC
DRAM without requiring additional VME slots.
FLASH
L2 Cache
603 or 604
256KB
PCI Chipset
Bridge
64
1 MB
Two PLCCs
(Socketed)
PowerPC Bus—A32/D64-bit
PCI Expansion
Memory
Controller
RAM200
0 to 512MB
Expansion
ECC DRAM
4MB or 8MB FLASH
16
x2
PCI Local Bus—A32/D64-bit
64
64
64
PCI to ISA
Bridge
W83C553
SCSI-2 FAST
Ethernet
SYM 53C825A
DEC 21140
PCI to VME
Bridge
Tundra Universe
SCSI
10/100BaseT or AIU
PMC I/O
SNAPHAT
Battery
ISA Bus—A16/D8-bit
NVRAM
RTC
MK48T59
1 PMC
Slot
Parallel Port
IEEE1284 or
Centronics
Floppy
Super I/O
National
87308
P1
P2
Sync Serial
Zilog 85230/8536
Serial 1
Serial 2
PS/2 Mouse,
Keyboard
MVME2600 Details
MVME2600 Details
PCI Expansion
MVME2600 modules have a 64-bit PCI connection to support
PCI expansion carriers such as Motorola PMCspan. Design
details for the connector and electrical specifications are
available from your local Motorola representative.
Memory Modules
The MVME2600 series has a modular memory design. Mezzanine arrays support up to 512MB of add-on DRAM. These
RAM200 expansion modules allow field upgrades of the
memory capacity and do not require additional VME slots.
Transition Modules
Two artwork variants of the MVME2600 are available. One
series provides backward compatibility with the MVME712M
transition module I/O. The other series accepts the
MVME761 transition module that features an additional sync/
async serial port, a 10/100BaseT interface, Fast 16-bit SCSI,
and an IEEE 1284 compatible parallel port.
MVME761
The MVME761 transition module provides industry-standard
connector access to the IEEE 1284 parallel port, a 10BaseT
or 100BaseT port via an RJ-45 connector, two DB-9 connectors providing access to the asynchronous serial ports configured as EIA-574 DTE, and two HD-26 connectors providing
access to the sync/async serial ports. These serial ports,
labeled as Serial 3 and Serial 4 on the face plate of the
MVME761, are individually user configurable as EIA-232,
Serial 3
Serial 4
EIA-530, V.35, or X.21 DCE or DTE via the installation of
Motorola Serial Interface Modules (SIMs).
A P2 adapter provides interface module signals to the
MVME761 transition module. The 3-row P2 adapter can be
used for 8-bit SCSI. A 5-row P2 adapter supports 16-bit SCSI
and PMC I/O.
MVME712M
The MVME712M transition module provides industry-standard connector access to the Centronics® parallel port, an
AUI port, and four DB-25 connectors providing access to the
asynchronous/synchronous serial ports jumper configurable
as EIA-232 DCE or DTE. A P2 adapter provides interface signals to the MVME712M transition module. The 3-row P2
adapter can be used for 8-bit SCSI.
To gain access to the additional user definable I/O pins provided via the 5-row VME64 extension connector, a special P2
adapter board is available. This adapter panel replaces the
traditional 3-row P2 adapter and extends its capability by providing access to the PMC I/O pins.
Several other variations of the MVME712M are available for
combinations of I/O and connectors.
Operating Systems and Real-Time Kernels
Motorola Computer Group:
Integrated Systems, Inc.:
Lynx Real-Time Systems, Inc.:
Microware Systems
Corporation:
AIX
pSOSystem™
LynxOS™
OS-9®/OS-9000™
Microtec:
VRTX32™
Wind River Systems, Inc.:
VxWorks®
Firmware Monitor
Firmware must fulfill the traditional functions of test and initialization, in addition to operating system boot support. The
MVME2600 firmware monitor exceeds these requirements
with a proven monitor from the embedded VME leader. It
expands features like power-up tests with extensive diagnostics, as well as a powerful evaluation and debug tool for simple checkout or when high-level development debuggers
require additional support. All this is included with the
MVME2600 firmware, plus it supports booting both operating
systems and kernels.
Speci fi cations
Specifications
VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)
Controller:
DTB Master:
DTB Slave:
Arbiter:
Interrupt Handler/
Generator:
System Controller:
Location Monitor:
Tundra Universe
A16–A32; D08–D64, BLT
A24–A32; D08–D64, BLT, UAT
RR/PRI
IRQ 1–7/Any one of seven IRQs
Yes, jumperable or auto detect
Two, LMA32
Ethernet Interface
MVME761
DEC 21140
DEC 21140
Interface Speed:
10/100Mb/s
AUI (10Mb/s)
Yes, with PCI burst
Yes, with PCI burst
Routed to P2,
RJ-45 on MVME761
Routed to P2,
DB-15 AUI on
MVME712M
PCI Local bus DMA:
Processor
Connector:
Microprocessor:
MPC603
MPC603
MPC604
MPC604
Clock Frequency:
200 MHz
200 MHz
333 MHz
400 MHz
On-chip Cache (I/D):
16K/16K
16K/16K
TBD
TBD
60ns
FPM
50ns
EDO
TBD
TBD
SPECint95,
estimated:
5.2
5.3
TBD
SPECfp95, estimated:
3.7
4.0
TBD
Memory Type:
MAIN MEMORY:
MVME761
MVME712M
Symbios 53C825A
Symbios 53C825A
TBD
PCI Local Bus DMA:
Yes, with PCI local
bus burst
Yes, with PCI local
bus burst
TBD
Asynchronous:
5.0MB/s
5.0MB/s
Synchronous:
10.0MB/s (8-bit
mode), 20.0MB/s
(16-bit mode)
10.0MB/s (8-bit
mode), 20.0MB/s
(16-bit mode)
Routed to P2, 50- or
68-pin on
MVME761EXT
Routed to P2, SCSI
D-50 on
MVME712M
Dynamic RAM
16, 32, or 64MB on RAM200
Capacity (50ns EDO):
128 or 256MB on RAM200
Single Cycle Accesses:
9 Read/4 Write
Read Burst Mode (60ns
FPM):
9-1-2-1 idle; 3-1-2-1 aligned page hit
Read Burst Mode (50ns
EDO):
8-1-1-1 idle; 2-1-1-1 aligned page hit
Write Burst Mode:
4-1-1-1 idle; 3-1-1-1 aligned page hit
Architecture:
128-bit, two-way interleaved
No/Yes
L2 CACHE:
256KB
FLASH:
Capacity:
Processor clock divided by 2
On-board programmable
1MB via two 32-pin PLCC/CLCC sockets; 8MB surface mount
Read Access (8MB port):
68 clocks (32 byte burst)
Read Access (1MB port):
260 clocks (8 byte burst)
Write Access (1MB/8MB):
NVRAM:
Cell Storage Life:
Cell Capacity Life:
Removable Battery:
Connector:
Asynchronous Serial Ports
Controller
Parity/ECC:
Cache Bus Clock
Frequency:
SCSI Interface
Controller:
Memory
Capacity (60ns FPM):
19 clocks (2 bytes/8 bytes)
8KB (4KB available for users)
50 years at 55° C
Number of Ports:
Configuration:
Async Baud Rate,
bps max.:
Connector:
Controller
Address/Data:
Signaling:
Connector:
A32/D32/D64
33 MHz
5V
114-pin connector located on the planar of the MVME2700 between P1 and
P2
MVME712M
PC87308
PC87308, 85230/
8536
Two, 16550 compatible
Two, 16550 compatible and one 85230/
8536
EIA-574 DTE
EIA-232 DCE/DTE
38.4K EIA-232,
115Kbps raw
38.4K EIA-232,
115Kbps raw
Routed to P2, DB-9
on MVME761
Routed to P2, DB-25
on MVME712M
MVME761
MVME712M
85230/8536
85230/8536
Two
One
TTL to P2 (both
ports), SIM on
MVME761
EIA-232 DCE/DTE
Baud Rate, bps max.:
2.5M sync, 38.4K
async
2.5M sync, 38.4K
async
Oscillator Clock Rate
(PCLK):
10 MHz/5 MHz
10 MHz/5 MHz
Routed to P2, HD26 on MVME761
Routed to P2, DB25 on MVME712M
Number of Ports:
Configuration:
10 years at 100% duty cycle
Yes
MVME761
Synchronous Serial Ports
PCI Expansion Connector
PCI Bus Clock:
MVME712M
Controller
Connector:
Parallel Port
Transition Mo dules
MVME761
MVME712M
PC87308
PC87308
8-bit bidirectional,
full IEEE 1284 support; Centronics
compatible
8-bit bidirectional,
IEEE 1284 minus
EPP and ECP
Controller
Configuration:
Modes:
Connector:
Master only
Master only
Routed to P2, HD36 on MVME761
Routed to P2, D-36
on MVME712M
Transition Modules
I/O Connectors
MVME761
Three, DB-25 labeled
as Serial 1, Serial 2,
and Serial 3
Synchronous
Serial Ports:
Two, HD-26 labeled as
Serial 3 and Serial 4
(user configurable via
installation of SIMs),
Two 60-pin connectors
on MVME761 planar
for installation of two
SIMs
One, DB-25 labeled as
Serial 4
Parallel Port:
HD-36, Centronics
compatible
D-36, Centronics compatible
Ethernet:
10BaseT or
100BaseTX RJ-45
10Mb/s Ethernet
DB-15 AUI
8- or 16-bit, 50- or 68pin connector via P2
adapter
8-bit, standard SCSI D50
Counters/Timers
TOD Clock Device:
Real-Time Timers/
Counters:
Watchdog Timer:
M48T18; 8KB NVRAM
Four, 32-bit programmable
Time-out generates reset
Floppy
Controller:
Compatible Controllers:
Configuration:
Connector:
PC87308
DP8473, 765A, N82077
3.5" 2.88MB and 1.44MB; 5.25" 1.2MB
SCSI:
HD-50 on front panel
Mouse Interface
Controller:
PC87308
Connector:
6-pin circular female mini DIN on front
panel
Board Size
Height:
233.4 mm (9.2 in.)
Depth:
80.0 mm (3.1 in.)
261.8 mm (10.3 in.)
Front Panel Height:
Keyboard Interface
Controller:
PC87308
Connector:
6-pin circular female mini DIN on front
panel
IEEE P1386.1 PCI Mezzanine Card Slot
Address/Data:
PCI Bus Clock:
Signaling:
Power:
Module Types:
A32/D32/D64, PMC PN1, PN2, PN3,
PN4 connectors
Power Requirements
(not including power required by PMC or external AUI transceiver)
+5V ± 5%
+12V ± 10%
–12V ± 10%
5V
+3.3V, +5V, ±12V; 7.5 watts maximum
per PMC slot
6.75 A typ.
8.5 A max.
250 mA typ.
500 mA max.
100 mA typ.
250 mA max.
MVME2604-1341:
8.0 A typ.
10.0 A max.
250 mA typ.
500 mA max.
100 mA typ.
250 mA max.
MVME2603-2141:
6.25 A typ.
8.0 A max.
250 mA typ.
500 mA max.
100 mA typ.
250 mA max.
MVME2604-4341:
7.5 A typ.
9.5 A max.
250 mA typ.
500 mA max.
100 mA typ.
250 mA max.
Basic, single-wide, front panel I/O or P2
I/O (Note: P2 I/O is only accessible to
systems equipped for VME64 extension
connectors.)
233.4 mm (9.2 in.)
Depth:
160.0 mm (6.3 in.)
Max. Component
Height:
All Modules
All Modules
MVME2603-1141:
Height:
Width:
19.8 mm (0.8 in.)
Width:
33 MHz
Board Size
Front Panel Height:
MVME712M
Two, DB-9 labeled as
COM1 and COM2
Asynchronous
Serial Ports:
261.8 mm (10.3 in.)
19.8 mm (0.8 in.)
–12V power is not used on the MVME2600 but is supplied for use
by other devices (such as PMC); requirements vary by device
Demonstrated MTBF
(based on a sample of eight boards in accelerated stress environment)
14.8 mm (0.58 in.)
Miscellaneous
Reset and abort switches on front panel; six LEDs for FAIL, CHKSTP,
CPU, PCI, SCON, and FUSE
Mean:
190,509 hours
95% Confidence:
107,681 hours
Environmental
Temperature:
Altitude:
Humidity (NC):
Vibration:
Operating
Nonoperating
0° C to +55° C,
forced air cooling
–40° C to +85° C
5,000 m
15,000 m
10% to 80%
10% to 90%
2 Gs RMS,
20–2000 Hz random
6 Gs RMS,
20–2000 Hz random
Electromagnetic Compatibility (EMC)
Intended for use in systems meeting the following regulations:
U.S.: FCC Part 15, Subpart B, Class A (non-residential)
Canada: ICES-003, Class A (non-residential)
This product was tested in a representative system to the following
standards:
CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN50082-1
MVME761 Transition Module
MVME761-001
Transition module: Two DB-9 async serial
port connectors, two HD-26 sync/async
serial port connectors, one HD-36 parallel
port connector, one RJ-45 10/100 Ethernet
connector; includes 3-row DIN P2 adapter
module and cable
MVME761-011
Transition module: Two DB-9 async serial
port connectors, two HD-26 sync/async
serial port connectors, one HD-36 parallel
port connector, one RJ-45 10/100 Ethernet
connector; includes 5-row DIN P2 adapter
module and cable; requires backplane with
5-row DIN connectors
MVME761P2-011
5-row DIN P2 adapter compatible with
MVME761; connectors for 16-bit (wide)
SCSI and PMC I/O; requires backplane with
5-row DIN connectors
Safety
All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers.
Ordering Information
Ordering Information
Part Number
Description
MVME2600 with MVME761 I/O
MVME761EXT
All modules include 9MB Flash.
MVME2603-1121C to
MVME2603-1161C
MVME2603-3121 to
MVME2603-3161
200 MHz MPC603, 16MB–256MB ECC
DRAM, IEEE 1101 compatible front panel
with injector/ejector handles
200 MHz MPC603, 16MB–256MB ECC
DRAM, original VME Scanbe front panel
and handles
MVME2604-1321 to
MVME2604-1361
333 MHz MPC604, 16MB–256MB ECC
DRAM, IEEE 1101 compatible front panel
with injector/ejector handles
MVME2604-1401 to
MVME2604-1471
400 MHz MPC604, 0–512MB ECC DRAM,
IEEE 1101 compatible front panel with
injector/ejector handles
MVME2604-3321 to
MVME2604-3361
400 MHz MPC604, 16MB–256MB ECC
DRAM, original VME Scanbe front panel
and handles
MVME2604-3401 to
MVME2604-3471
400 MHz MPC604, 0–512MB ECC DRAM,
original VME Scanbe front panel and handles
SIM232DCE or DTE
EIA-232 DCE or DTE Serial Interface Module
SIM530DCE or DTE
EIA-530 DCE or DTE Serial Interface Module
SIMV35DCE or DTE
V.35 DCE or DTE Serial Interface Module
SIMX21DCE or DTE
X.21 DCE or DTE Serial Interface Module
MVME712 Transition Module
MVME712M
200 MHz MPC603, 16MB–128MB ECC
DRAM, 9MB Flash, original VME Scanbe
front panel and handles
Transition module: One DB-25 sync/async
serial port connector, three DB-25 async
serial port connectors, one AIU connector
for Ethernet, one D-36 parallel port connector, and one 50-pin 8-bit SCSI connector;
includes 3-row DIN P2 adapter module and
cable
Related Products
PMCSPAN-001
MVME2600 with MVME712 I/O
MVME2603-4121 to
MVME2603-4151
MVME761 I/O extension module, connectors for Ethernet, SCSI and PMC I/O
Primary 32-bit PCI expansion, mates
directly to the MVME2600 providing slots
for either two single-wide or one doublewide PMC card, accepts optional PMCSPAN-010, IEEE 1101 compatible front panel
with injector/ejector handles
PMCSPAN1-001
200 MHz MPC603, 16MB–32MB ECC
DRAM, 9MB Flash, IEEE 1101 compatible
front panel with injector/ejector handles
PMCSPAN-001 with original VME Scanbe
front panel and handles
PMCSPAN-010
MVME2604-4321 to
MVME2604-4361
333 MHz MPC604, 16MB–256MB ECC
DRAM, 9MB Flash, original VME Scanbe
front panel and handles
Secondary 32-bit PCI expansion, plugs
directly into PMCSPAN-001 providing two
additional PMC slots
PMCSPAN1-010
PMCSPAN-010 with original VME Scanbe
front panel and handles
MVME2604-4401 to
MVME2604-4471
400 MHz MPC604, 0–512MB ECC DRAM,
9MB Flash, original VME Scanbe front
panel and handles
MVME2603-5121 to
MVME2603-5131
MPMCxxx
Motorola’s family of PMC modules; ask your
sales representative for details
RAM200-043A
32MB ECC DRAM mezzanine, 8MB Flash,
non-stackable
RAM200-044A
64MB ECC DRAM mezzanine, 8MB Flash,
non-stackable
RAM200-045A
128MB ECC DRAM mezzanine, 8MB
Flash, non-stackable
RAM200-046A
256MB ECC DRAM mezzanine, 8MB
Flash, non-stackable
RAM200-047A
512MB ECC DRAM mezzanine, 8MB
Flash, non-stackable
Documentation
V2600A/IH
MVME2600 Installation and Use
V2600A/PG
MVME2600/2700 Programmer’s Reference Guide
VME761A/IH
MVME761 Transition Module Installation and Use
VME712A/IH
MVME712 Transition Module Installation and Use
PPCBUGA1/UM
and PPCBUGA2/UM
PPCDIAA/UM
www.motorola.com/computer
1-800-759-1107
PPCBug Firmware Package User’s Manual
PPCBug Diagnostics Manual
Notes on Ordering Information
1. Major revision levels are indicated by alpha character at end of part number.
2. Board support package source and object modules available upon request.
3. Documentation is available for on-line viewing and ordering at http://www.motorola.com/
computer/literature.
Motorola Computer Group
2900 S. Diablo Way
Tempe, AZ 85282
Regional Sales Offices
Canada & Central Pan America
400 Matheson Blvd. West
Mississauga, Ontario
L5R 3M1 Canada
905-507-7135 or 888-366-3624
Eastern Pan America
1650 Tysons Boulevard, Suite 250
McLean, VA 22102
703-714-0725
Western Pan America
1150 Kifer Road, Suite 202
Sunnyvale, CA 94086
408-991-8633
Asia Pacific and Japan
34/F Nat West Tower
Times Square, 1 Matheson St
Causeway Bay, Hong Kong
852-2966-3209
East Mediterranean
6 HaTaas Street
Ramat-Gan, Isreal 52523
972-3-610-4388
France
Zone Technopolis - Immeuble
THETA 3, avenue du Canada - BP304
91958 LES ULIS
Courtaboeuf Cedex, France
+33 (0) 1 64 86 64 00
Germany
Hagenauer Strasse 47
D-65203 Wiesbaden, Germany
+49 (0) 611-3611 604
Benelux
De Waal 26, 5684 PH Best
PO Box 350, 5680 AJ Best
Netherlands
+31 4993 61250
Nordic
Dalvagen 2
S-169 56 Solna, Sweden
+46 (0) 8 734 8800
United Kingdom
London Road, Old Basing,
Basingstoke, Hampshire
RG24 7JL England
+44 (0) 1256 790555
Motorola and the Motorola logo are registered trademarks and The Heart of Smart, DigitalDNA and the DigitalDNA logo are trademarks of Motorola, Inc. AIX is a registered trademark of
International Business Machines Corporation. PowerPC and the PowerPC logo are registered trademarks; and PowerPC 603 and PowerPC 604 are trademarks of International Business
Machines Corporation and are used by Motorola, Inc. under license from International Business Machines Corporation. Centronics is a registered trademark of Centronics Data Computer
Corporation. All other names, products, and/or services mentioned may be trademarks or registered trademarks of their respective holders.
This data sheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present
or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer
should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products
or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes
Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations.
Copyright 1997 Motorola Inc. 2600X-D4 5/00