Signamax Small Form-factor Pluggable (SFP)
hardened temperature range (-40° C to 85°
C) fiber modules come in an array of
options supporting Gigabit
Ethernet transmission over
either multimode or singlemode
fiber cable at distances up to 110
kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and the
SFP Multi-Source Agreement (MSA),
and are cost-effective methods of providing changeable Gigabit Ethernet
fiber optic interfaces to hardened industrial switches and media converters
equipped with a standard SFP slot.
PoE Ethernet Switches
26-Port 10/100/1000 Stackable Managed
PoE / PoE+ Switches with Four
100/1000Base SFP Dual Media Ports
plus Two 100/1000Base SFP Slots
Signamax Connectivity Systems’ 065-7861POE and 065-7861POEFP switches are the new flagships of the Signamax Ethernet Power
over Ethernet (PoE) switch product line. They provide non-blocking
performance for 24 10/100/1000 Gigabit Ethernet connections
supporting either PoE or the new PoE+ 802.3at standard, 4 of which
are Dual Media 100/1000Base SFP Ports, plus 2 100/1000Base
SFP-only ports, for a total of 26 ports. These new switches support
modern capabilities including IPv6, SSH management, QoS and
Tagged VLAN, and full SNMP management at a surprisingly low
cost. The six 100 or 1000Base SFP slots (four are Dual Media ports)
use auto-detected SFP modules for fiber optic switch interconnection
at extended distances. Both ring and star Gigabit backbone network
architectures are possible with full automatic failover. The included
SNMP management package is complete and comprehensive, with
web browser, local console, and Telnet remote terminal connections
and real time updating. The 065-7861 also communicates with
network management systems such as HP OpenView™ via SNMP
for enterprise-wide status display, statistical monitoring, and switch
control. Enhanced Layer 2+ look-ahead routing features and IEEE
802.1p Quality of Service / 802.1Q Tagged VLAN / IP Type of
Service support make the Signamax 065-7861POE or the 0657861POE-FP models excellent choices for establishing or adding to
an Enterprise PoE / PoE+ network.
ORDERING INFORMATION
PART NO.
065-7861POE
ORDERING INFORMATION
Hardened 1000Base SFP Fiber
Modules (-40° C to 85° C)
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
Supports both IEEE 802.3af PoE and IEEE 802.3at
PoE+ devices.
Dual speed SFP slots for Fast Ethernet or Gigabit Ethernet
fiber uplink.
802.3az Energy Efficient Ethernet standard.
IPv6 and s-Flow support.
Easy-Port-Configuration, for ease of setup in the IP Phone,
IP Camera or Wireless environments.
IEEE 802.1AB LLDP (Link Layer Discovery Protocol) and
LLDP-MED (Media Endpoint Discovery) support.
Supports RSTP/MSTP/STP for Ethernet redundancy.
IP Multicast Filtering through IGMP Snooping V1, V2 & V3.
Supports port-based VLAN and IEEE 802.1Q VLAN Tagging
and GVRP.
IEEE 802.1p QoS with four priority queues.
IEEE 802.3 ad Link Aggregation Control Protocol (LACP)
support.
RS-232 console, Telnet, SNMP V1, V2c & V3, RMON,
SSL/SSH, HTTP (Web Browser), and TFTP Management.
1000Base SFP Fiber Modules (0° C to 70° C)
Signamax Small Form-factor Pluggable (SFP) commercial
temperature range (0° C to 70° C) fiber modules come in
an array of options supporting Gigabit Ethernet
transmission over either multimode or
singlemode fiber cable at distances up to
110 kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and
the SFP Multi-Source
Agreement (MSA), and are costeffective methods of providing
changeable Gigabit Ethernet fiber
optic interfaces to commercial-grade
switches and media converters
equipped with a standard SFP slot.
Bandwidth Rate Control, via port-policer.
Static Secure MAC addresses supported.
Supports Network Time Protocol (NTP).
1000 Mbps: Full-duplex; 10/100 Mbps: Full/Half-duplex;
Auto-Negotiation, Auto-MDI/MDIX.
Note: Optional SFP Gigabit Ethernet and Fast Ethernet Modules Sold Separately.
Please go to www.signamax.com for details.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
065-79SXEDMG-H
065-79LXMG-H
065-79LXEDMG-H
065-79XDMG-H
065-79ZXMG-H
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
065-79SXMG
065-79SXEDMG
065-79LXMG
065-79LXEDMG
065-79XDMG
065-79ZXMG
ETHERNET WORK FOR YOU
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
MAKING POWER OVER
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
DESCRIPTION
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
P o E
NE T W OR K
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
DC-1848-75W
DC-1848-120W
DC-1848-240W
T
DC-1848-480W
TM
DESCRIPTION
75 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.) or 120 to 370 V DC, 48 V DC output.
120 Watt extended temperature DIN-rail mount power supply, input 88 to 132 / 176
to 264 V AC (47 to 63 Hz.), switch-selectable, or 120 to 370 V DC, 48 V DC output.
240 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
480 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
999 N.W. 159th Drive, Miami, FL 33169. • 800 446-2377 • www.signamax.com
www.signamax.com
Media
C ONNE C T I V I T Y
PoE
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
The Signamax Connectivity Systems' DC-1848 series Hardened Industrial DIN-rail
Mount Power Supplies are intended to provide clean, reliable 48 volt DC power to
Power over Ethernet (PoE) harsh environment equipment under severe conditions.
These power supplies are the solution for transportation surveillance camera systems,
outdoor PoE-capable wireless access points, and other harsh environments where
temperature extremes exist and PoE is a requirement. The included DIN-rail mount
makes installation easy. Input power can be either AC or DC, over a wide voltage
range. Perfect for powering Signamax harsh environment PoE switches or other
devices requiring 48 volt DC power.
Port mirroring, both Inbound and Outbound.
065-7861POE-FP 26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 370 watts PoE power.
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
TM
48 Volt DC Industrial DIN-Rail Mount Power Supplies
Per-port programmable MAC address locking.
26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 185 watts PoE power.
065-79SXMG-H
Hardened Temperature Range (-40° C to 85° C) Models:
065-79EZXMG
Supports Command Line Interface in RS-232 Console.
DESCRIPTION
DESCRIPTION
065-79EZXMG-H
Supports IEEE 802.1x Security.
Full wire-speed forwarding rate.
PART NO.
Powering devices remotely using Power over Ethernet (PoE) offers
tremendous benefits. How do you get PoE working for you?
By leveraging the new Signamax switches and media converters
uniquely suited for PoE applications.
S Y S T E M S
CONVERTERS
Ethernet
PoE
With Power over Ethernet, Signamax continues its 30-year tradition of
providing high-performance, high reliability products that meet the
most demanding needs of customers across major industries. Our new
commercial and industrial grade switches and media converters deliver
high value and high ROI for PoE applications — with models and
configurations to suit any application or technical requirement.
Keeping
Yo u r
World
Connected.
PoE greatly simplifies the task and drives down the cost of powering
devices remotely, especially for VoIP applications. And the Signamax
PoE line delivers all of the advantages of this powerful technology.
䡲 Cost savings: Just one cable is required — no need to install conduit,
electrical wiring or outlets.
䡲 Flexibility: Locate your PoE appliance or device anywhere, even where
no AC outlets exist.
䡲 Reliability: Fewer wires mean less risk of power disruption. And with a
UPS in place, power to your devices is assured even if a failure occurs.
䡲 Network Control: Easily monitor and control your devices in a managed
environment using SNMP.
With pre-sale design, post-design support and a generous warranty,
Signamax can help maximize the ROI of your PoE project and assure high
uptime and value. Contact Signamax or an authorized distributor to learn
more about our PoE line or our full range of solutions.
IPCam
IPCam
Internet
065-7726SPOE-FP
PoE-AP
SWITCHES
Data
PoE-AP
Power
Signamax Small Form-factor Pluggable (SFP)
hardened temperature range (-40° C to 85°
C) fiber modules come in an array of
options supporting Gigabit
Ethernet transmission over
either multimode or singlemode
fiber cable at distances up to 110
kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and the
SFP Multi-Source Agreement (MSA),
and are cost-effective methods of providing changeable Gigabit Ethernet
fiber optic interfaces to hardened industrial switches and media converters
equipped with a standard SFP slot.
PoE Ethernet Switches
26-Port 10/100/1000 Stackable Managed
PoE / PoE+ Switches with Four
100/1000Base SFP Dual Media Ports
plus Two 100/1000Base SFP Slots
Signamax Connectivity Systems’ 065-7861POE and 065-7861POEFP switches are the new flagships of the Signamax Ethernet Power
over Ethernet (PoE) switch product line. They provide non-blocking
performance for 24 10/100/1000 Gigabit Ethernet connections
supporting either PoE or the new PoE+ 802.3at standard, 4 of which
are Dual Media 100/1000Base SFP Ports, plus 2 100/1000Base
SFP-only ports, for a total of 26 ports. These new switches support
modern capabilities including IPv6, SSH management, QoS and
Tagged VLAN, and full SNMP management at a surprisingly low
cost. The six 100 or 1000Base SFP slots (four are Dual Media ports)
use auto-detected SFP modules for fiber optic switch interconnection
at extended distances. Both ring and star Gigabit backbone network
architectures are possible with full automatic failover. The included
SNMP management package is complete and comprehensive, with
web browser, local console, and Telnet remote terminal connections
and real time updating. The 065-7861 also communicates with
network management systems such as HP OpenView™ via SNMP
for enterprise-wide status display, statistical monitoring, and switch
control. Enhanced Layer 2+ look-ahead routing features and IEEE
802.1p Quality of Service / 802.1Q Tagged VLAN / IP Type of
Service support make the Signamax 065-7861POE or the 0657861POE-FP models excellent choices for establishing or adding to
an Enterprise PoE / PoE+ network.
ORDERING INFORMATION
PART NO.
065-7861POE
ORDERING INFORMATION
Hardened 1000Base SFP Fiber
Modules (-40° C to 85° C)
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
Supports both IEEE 802.3af PoE and IEEE 802.3at
PoE+ devices.
Dual speed SFP slots for Fast Ethernet or Gigabit Ethernet
fiber uplink.
802.3az Energy Efficient Ethernet standard.
IPv6 and s-Flow support.
Easy-Port-Configuration, for ease of setup in the IP Phone,
IP Camera or Wireless environments.
IEEE 802.1AB LLDP (Link Layer Discovery Protocol) and
LLDP-MED (Media Endpoint Discovery) support.
Supports RSTP/MSTP/STP for Ethernet redundancy.
IP Multicast Filtering through IGMP Snooping V1, V2 & V3.
Supports port-based VLAN and IEEE 802.1Q VLAN Tagging
and GVRP.
IEEE 802.1p QoS with four priority queues.
IEEE 802.3 ad Link Aggregation Control Protocol (LACP)
support.
RS-232 console, Telnet, SNMP V1, V2c & V3, RMON,
SSL/SSH, HTTP (Web Browser), and TFTP Management.
1000Base SFP Fiber Modules (0° C to 70° C)
Signamax Small Form-factor Pluggable (SFP) commercial
temperature range (0° C to 70° C) fiber modules come in
an array of options supporting Gigabit Ethernet
transmission over either multimode or
singlemode fiber cable at distances up to
110 kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and
the SFP Multi-Source
Agreement (MSA), and are costeffective methods of providing
changeable Gigabit Ethernet fiber
optic interfaces to commercial-grade
switches and media converters
equipped with a standard SFP slot.
Bandwidth Rate Control, via port-policer.
Static Secure MAC addresses supported.
Supports Network Time Protocol (NTP).
1000 Mbps: Full-duplex; 10/100 Mbps: Full/Half-duplex;
Auto-Negotiation, Auto-MDI/MDIX.
Note: Optional SFP Gigabit Ethernet and Fast Ethernet Modules Sold Separately.
Please go to www.signamax.com for details.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
065-79SXEDMG-H
065-79LXMG-H
065-79LXEDMG-H
065-79XDMG-H
065-79ZXMG-H
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
065-79SXMG
065-79SXEDMG
065-79LXMG
065-79LXEDMG
065-79XDMG
065-79ZXMG
ETHERNET WORK FOR YOU
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
MAKING POWER OVER
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
DESCRIPTION
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
P o E
NE T W OR K
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
DC-1848-75W
DC-1848-120W
DC-1848-240W
T
DC-1848-480W
TM
DESCRIPTION
75 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.) or 120 to 370 V DC, 48 V DC output.
120 Watt extended temperature DIN-rail mount power supply, input 88 to 132 / 176
to 264 V AC (47 to 63 Hz.), switch-selectable, or 120 to 370 V DC, 48 V DC output.
240 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
480 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
999 N.W. 159th Drive, Miami, FL 33169. • 800 446-2377 • www.signamax.com
www.signamax.com
Media
C ONNE C T I V I T Y
PoE
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
The Signamax Connectivity Systems' DC-1848 series Hardened Industrial DIN-rail
Mount Power Supplies are intended to provide clean, reliable 48 volt DC power to
Power over Ethernet (PoE) harsh environment equipment under severe conditions.
These power supplies are the solution for transportation surveillance camera systems,
outdoor PoE-capable wireless access points, and other harsh environments where
temperature extremes exist and PoE is a requirement. The included DIN-rail mount
makes installation easy. Input power can be either AC or DC, over a wide voltage
range. Perfect for powering Signamax harsh environment PoE switches or other
devices requiring 48 volt DC power.
Port mirroring, both Inbound and Outbound.
065-7861POE-FP 26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 370 watts PoE power.
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
TM
48 Volt DC Industrial DIN-Rail Mount Power Supplies
Per-port programmable MAC address locking.
26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 185 watts PoE power.
065-79SXMG-H
Hardened Temperature Range (-40° C to 85° C) Models:
065-79EZXMG
Supports Command Line Interface in RS-232 Console.
DESCRIPTION
DESCRIPTION
065-79EZXMG-H
Supports IEEE 802.1x Security.
Full wire-speed forwarding rate.
PART NO.
Powering devices remotely using Power over Ethernet (PoE) offers
tremendous benefits. How do you get PoE working for you?
By leveraging the new Signamax switches and media converters
uniquely suited for PoE applications.
S Y S T E M S
CONVERTERS
Ethernet
PoE
With Power over Ethernet, Signamax continues its 30-year tradition of
providing high-performance, high reliability products that meet the
most demanding needs of customers across major industries. Our new
commercial and industrial grade switches and media converters deliver
high value and high ROI for PoE applications — with models and
configurations to suit any application or technical requirement.
Keeping
Yo u r
World
Connected.
PoE greatly simplifies the task and drives down the cost of powering
devices remotely, especially for VoIP applications. And the Signamax
PoE line delivers all of the advantages of this powerful technology.
䡲 Cost savings: Just one cable is required — no need to install conduit,
electrical wiring or outlets.
䡲 Flexibility: Locate your PoE appliance or device anywhere, even where
no AC outlets exist.
䡲 Reliability: Fewer wires mean less risk of power disruption. And with a
UPS in place, power to your devices is assured even if a failure occurs.
䡲 Network Control: Easily monitor and control your devices in a managed
environment using SNMP.
With pre-sale design, post-design support and a generous warranty,
Signamax can help maximize the ROI of your PoE project and assure high
uptime and value. Contact Signamax or an authorized distributor to learn
more about our PoE line or our full range of solutions.
IPCam
IPCam
Internet
065-7726SPOE-FP
PoE-AP
SWITCHES
Data
PoE-AP
Power
Signamax Small Form-factor Pluggable (SFP)
hardened temperature range (-40° C to 85°
C) fiber modules come in an array of
options supporting Gigabit
Ethernet transmission over
either multimode or singlemode
fiber cable at distances up to 110
kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and the
SFP Multi-Source Agreement (MSA),
and are cost-effective methods of providing changeable Gigabit Ethernet
fiber optic interfaces to hardened industrial switches and media converters
equipped with a standard SFP slot.
PoE Ethernet Switches
26-Port 10/100/1000 Stackable Managed
PoE / PoE+ Switches with Four
100/1000Base SFP Dual Media Ports
plus Two 100/1000Base SFP Slots
Signamax Connectivity Systems’ 065-7861POE and 065-7861POEFP switches are the new flagships of the Signamax Ethernet Power
over Ethernet (PoE) switch product line. They provide non-blocking
performance for 24 10/100/1000 Gigabit Ethernet connections
supporting either PoE or the new PoE+ 802.3at standard, 4 of which
are Dual Media 100/1000Base SFP Ports, plus 2 100/1000Base
SFP-only ports, for a total of 26 ports. These new switches support
modern capabilities including IPv6, SSH management, QoS and
Tagged VLAN, and full SNMP management at a surprisingly low
cost. The six 100 or 1000Base SFP slots (four are Dual Media ports)
use auto-detected SFP modules for fiber optic switch interconnection
at extended distances. Both ring and star Gigabit backbone network
architectures are possible with full automatic failover. The included
SNMP management package is complete and comprehensive, with
web browser, local console, and Telnet remote terminal connections
and real time updating. The 065-7861 also communicates with
network management systems such as HP OpenView™ via SNMP
for enterprise-wide status display, statistical monitoring, and switch
control. Enhanced Layer 2+ look-ahead routing features and IEEE
802.1p Quality of Service / 802.1Q Tagged VLAN / IP Type of
Service support make the Signamax 065-7861POE or the 0657861POE-FP models excellent choices for establishing or adding to
an Enterprise PoE / PoE+ network.
ORDERING INFORMATION
PART NO.
065-7861POE
ORDERING INFORMATION
Hardened 1000Base SFP Fiber
Modules (-40° C to 85° C)
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
Supports both IEEE 802.3af PoE and IEEE 802.3at
PoE+ devices.
Dual speed SFP slots for Fast Ethernet or Gigabit Ethernet
fiber uplink.
802.3az Energy Efficient Ethernet standard.
IPv6 and s-Flow support.
Easy-Port-Configuration, for ease of setup in the IP Phone,
IP Camera or Wireless environments.
IEEE 802.1AB LLDP (Link Layer Discovery Protocol) and
LLDP-MED (Media Endpoint Discovery) support.
Supports RSTP/MSTP/STP for Ethernet redundancy.
IP Multicast Filtering through IGMP Snooping V1, V2 & V3.
Supports port-based VLAN and IEEE 802.1Q VLAN Tagging
and GVRP.
IEEE 802.1p QoS with four priority queues.
IEEE 802.3 ad Link Aggregation Control Protocol (LACP)
support.
RS-232 console, Telnet, SNMP V1, V2c & V3, RMON,
SSL/SSH, HTTP (Web Browser), and TFTP Management.
1000Base SFP Fiber Modules (0° C to 70° C)
Signamax Small Form-factor Pluggable (SFP) commercial
temperature range (0° C to 70° C) fiber modules come in
an array of options supporting Gigabit Ethernet
transmission over either multimode or
singlemode fiber cable at distances up to
110 kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and
the SFP Multi-Source
Agreement (MSA), and are costeffective methods of providing
changeable Gigabit Ethernet fiber
optic interfaces to commercial-grade
switches and media converters
equipped with a standard SFP slot.
Bandwidth Rate Control, via port-policer.
Static Secure MAC addresses supported.
Supports Network Time Protocol (NTP).
1000 Mbps: Full-duplex; 10/100 Mbps: Full/Half-duplex;
Auto-Negotiation, Auto-MDI/MDIX.
Note: Optional SFP Gigabit Ethernet and Fast Ethernet Modules Sold Separately.
Please go to www.signamax.com for details.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
065-79SXEDMG-H
065-79LXMG-H
065-79LXEDMG-H
065-79XDMG-H
065-79ZXMG-H
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
065-79SXMG
065-79SXEDMG
065-79LXMG
065-79LXEDMG
065-79XDMG
065-79ZXMG
ETHERNET WORK FOR YOU
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
MAKING POWER OVER
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
DESCRIPTION
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
P o E
NE T W OR K
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
DC-1848-75W
DC-1848-120W
DC-1848-240W
T
DC-1848-480W
TM
DESCRIPTION
75 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.) or 120 to 370 V DC, 48 V DC output.
120 Watt extended temperature DIN-rail mount power supply, input 88 to 132 / 176
to 264 V AC (47 to 63 Hz.), switch-selectable, or 120 to 370 V DC, 48 V DC output.
240 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
480 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
999 N.W. 159th Drive, Miami, FL 33169. • 800 446-2377 • www.signamax.com
www.signamax.com
Media
C ONNE C T I V I T Y
PoE
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
The Signamax Connectivity Systems' DC-1848 series Hardened Industrial DIN-rail
Mount Power Supplies are intended to provide clean, reliable 48 volt DC power to
Power over Ethernet (PoE) harsh environment equipment under severe conditions.
These power supplies are the solution for transportation surveillance camera systems,
outdoor PoE-capable wireless access points, and other harsh environments where
temperature extremes exist and PoE is a requirement. The included DIN-rail mount
makes installation easy. Input power can be either AC or DC, over a wide voltage
range. Perfect for powering Signamax harsh environment PoE switches or other
devices requiring 48 volt DC power.
Port mirroring, both Inbound and Outbound.
065-7861POE-FP 26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 370 watts PoE power.
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
TM
48 Volt DC Industrial DIN-Rail Mount Power Supplies
Per-port programmable MAC address locking.
26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 185 watts PoE power.
065-79SXMG-H
Hardened Temperature Range (-40° C to 85° C) Models:
065-79EZXMG
Supports Command Line Interface in RS-232 Console.
DESCRIPTION
DESCRIPTION
065-79EZXMG-H
Supports IEEE 802.1x Security.
Full wire-speed forwarding rate.
PART NO.
Powering devices remotely using Power over Ethernet (PoE) offers
tremendous benefits. How do you get PoE working for you?
By leveraging the new Signamax switches and media converters
uniquely suited for PoE applications.
S Y S T E M S
CONVERTERS
Ethernet
PoE
With Power over Ethernet, Signamax continues its 30-year tradition of
providing high-performance, high reliability products that meet the
most demanding needs of customers across major industries. Our new
commercial and industrial grade switches and media converters deliver
high value and high ROI for PoE applications — with models and
configurations to suit any application or technical requirement.
Keeping
Yo u r
World
Connected.
PoE greatly simplifies the task and drives down the cost of powering
devices remotely, especially for VoIP applications. And the Signamax
PoE line delivers all of the advantages of this powerful technology.
䡲 Cost savings: Just one cable is required — no need to install conduit,
electrical wiring or outlets.
䡲 Flexibility: Locate your PoE appliance or device anywhere, even where
no AC outlets exist.
䡲 Reliability: Fewer wires mean less risk of power disruption. And with a
UPS in place, power to your devices is assured even if a failure occurs.
䡲 Network Control: Easily monitor and control your devices in a managed
environment using SNMP.
With pre-sale design, post-design support and a generous warranty,
Signamax can help maximize the ROI of your PoE project and assure high
uptime and value. Contact Signamax or an authorized distributor to learn
more about our PoE line or our full range of solutions.
IPCam
IPCam
Internet
065-7726SPOE-FP
PoE-AP
SWITCHES
Data
PoE-AP
Power
24-Port 10/100BaseT/TX Stackable Managed PoE
Switches + 2 SFP/RJ-45 Ports
The 065-7726SPOE and 065-7726SPOE-FP 10/100 PoE Stacking Switch
with Gigabit dual media access ports provide the capability to remotely power
IP cameras, wireless access points, VoIP telephones, and other devices that
meet the IEEE 802.3af PoE standard. These switches provide non-blocking
performance for two 10/100/1000BaseT/TX Dual Media Gigabit Ethernet
ports plus 24 10/100BaseT/TX PoE-equipped ports. The 065-7726SPOE
and 065-7726SPOE-FP switches share the same SNMP management
package. Both ring and star Gigabit backbone network architectures are
possible with full automatic failover AND PoE extension to every workstation.
Enhanced Layer 3 look-ahead routing features and IEEE 802.1p Quality of
Service/ 802.1Q Tagged VLAN / IP Type of Service support make the
Signamax 065-7726SPOE and 065-7726SPOE-FP switches the costeffective choices for creating an infrastructure capable of supporting IP
cameras, Voice over IP telephony, and wireless access.
ORDERING INFORMATION
PART NO.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
PoE, To Save Power Infrastructure Costs
Isolated Group Feature for Secure Port Segregation
2 Dual Media Ports for Flexible Fiber Connection
Port Mirroring for Enhanced Network Monitoring
065-7726SPOE Model Supports 24 PoE Class 1 or 2 Devices;
065-7726SPOE-FP Model Supports 24 PoE Class 1, 2, 3 or
Class 0 Devices
802.3ad Port Trunking with Automatic Link Fail-Over for
Bandwidth Aggregation
QoS Supports 4 Priority Queues
802.1x Access Control Improves Network Security
802.1D Compatible & 802.1w Rapid Spanning Tree
Q-in-Q VLAN for Performance & Security
24-Port 10/100 Managed PoE Switch + 2 SFP/RJ-45 Dual Media Ports
065-7726SPOE-FP 24-Port 10/100 Managed Full-Power PoE Switch + 2 SFP/RJ-45
Dual Media Ports
SFP Modules are sold separately. Please see the SFP module section
at www.signamax.com for SFP fiber module options.
8-Port 10/100BaseT/TX Full-Power PoE Switch
with 8 PoE Ports
The 065-7308POE-FP 8-Port 10/100BaseT/TX Power over Ethernet (PoE)
Full-Power switch provides the capability to remotely power up to eight IP
cameras, wireless access points, VoIP telephones, Powered Device (PD)
media converters, and other devices that meet the IEEE 802.1af PoE standard
at full Power Class 1,2, 3 or 0 power levels, simultaneously. This switch
provides non-blocking performance to all 8 unmanaged 10/100BaseT/TX
ports, all of which are PoE-equipped. The 065-7308POE-FP switch allows
cost-effective PoE extension to smaller offices and workgroups.
ORDERING INFORMATION
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
Supports IEEE 802.3af Power over Ethernet standard
as PSE on all eight PoE-TP ports (End-Point).
Full power (15.4w) support for all PoE-TP ports
simultaneously; 124 Watts of PoE power available.
Auto-detection of powered devices and power
consumption levels.
Non-blocking, wire-speed switching matrix.
All ports are Auto-MDIX and Auto-Negotiating.
LED indicators for data and POE activity.
PART NO.
DESCRIPTION
065-7308POE-FPRM
Rack Mount Kit for 065-7308POE-FP Switch
065-7308POE-FP
The 065-18xxZ series 10/100 to 100BaseFX PoE+ Power
Source Equipment (PSE) Industrial Media Converters are
an affordable solution developed to operate in harsh
environments that require ruggedized equipment operating
in wide temperature extremes of -14°F to 140°F (-10°C to
60°C, tested from -4°F to 158°F [-20°C to 70°C]). These
media converters support and provide power to both IEEE
802.3af PoE and IEEE 802.3at PoE+ Powered Devices
such as IP cameras, Access Control Devices, and Wireless
Access Points, and are compact, plug-and-play devices that
do not require complex user setup with DIP switch
configuration for “Link-Fault-Pass-Through”, speed and
duplex mode. The 48 V DC terminal block accepts DC
power from a local power supply.
8-Port 10/100BaseT/TX Full-Power PoE Switch with 8 PoE Ports
TM
NETWORK CONNECTIVITY SYSTEMS
10/100 TO 100BaseFX Power over Ethernet
Fiber Media Converters
The 065-1050 series
media converters are
10/100BaseT/TX to
100BaseFX Power over
Ethernet (PoE) devices
that serve as Power
Sourcing Equipment
(PSE) providing power to
IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using a TP cable.
This AC-powered PoE media converter combines data received over a fiber optic
link with PoE power, which the PD can use in lieu of a separate power connector.
The 065-1050 converters feature PD signature-sensing, power monitoring, overcurrent protection, under-current detection, input fault protection and Link Fault
Signaling (LFS) allowing the monitoring of both the fiber and copper ports for loss
of signal and preventing the loss of data when trying to transmit over a failed link.
PART NO.
DESCRIPTION
065-1800Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, ST Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1810Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1820Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Singlemode, 15 km Span,
48 V DC Power Terminal Block
Required 48 VDC Power Supply sold separately; please see
www.signamax.com for 75, 120, 240, or 480 watt models to
support connected loads.
ORDERING INFORMATION
PART NO.
The NEW 065-POEINJ-G 1-port Gigabit-capable
PoE/PoE+ Power Injector is a compact and cost
effective full IEEE 802.3at (30 watts) and IEEE
802.3af (15.4 watts) compliant solution for Network
Cameras, IP phones, Wireless Access Points, and
other IP terminal installations. Unlike many
competing products, the 065-POEINJ-G supports
a 10/100/1000BaseT/TX RJ45 connection utilizing
phantom power over RJ45 pins 4, 5, 7, and 8, and comes in a compact package for
wall or desktop mounting. The 065-POEINJ-G injector operates at temperatures
ranging from 14° F to 104° F (-10° C to 40° C). This rugged, compact, and costeffective PoE/PoE+ power injector is the easy answer for individual PoE or PoE+
deployments where PoE switches may not be appropriate.
DESCRIPTION
065-1050SC
10/100BaseT/TX to 100BaseFX PoE (PSE)
Media Converter; SC Multimode, 2 km Span
065-1050GSX
10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; SC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
ORDERING INFORMATION
PART NO.
DESCRIPTION
065-7708HPOEP
6-Port 10/100 (4 PoE+ ports) Hardened Managed Switch + 2 SFP/RJ-45 Gigabit Dual Media Ports
065-7708HRM
19 inch rack mounting hardware for 065-7708HPOEP
065-7708HPM
065-79LXMG-H
Panel mounting hardware for 065-7708HPOEP
1000BaseSX Hardened SFP Module 850 nm – MM/LC, 220 m Span on 62.5µm Fiber / 550 m Span
on 50µm Fiber, -40° F to 185° F (-40° C to 85° C) operation
1000BaseLX Hardened SFP Module 1310 nm – SM/LC, 10 km, -40° F to 185° F (-40° C to 85° C)
operation
Notes:
• Optional Mounting Hardware and Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
10/100BaseT/TX to 100BaseFX PoE (PD)
Media Converter; SC Multimode, 2 km Span
Note: Minimum Order Quantities
may apply to these products.
ORDERING INFORMATION
PART NO.
065-POEINJ-G
DESCRIPTION
1-Port 10/100/1000 PoE/PoE+
Power Injector
Available early February, 2014.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
The 065-7408 series is a low cost unmanaged s
witch option when your project calls for up to 8 10/100
Copper ports and up to 1 100Base FX Fiber port. This
Hardened Industrial DIN-rail Mount Switch has been
developed to operate and provide reliable power to up to
4 PoE (Power over Ethernet) Powered Devices (PDs) in
harsh industrial and municipal environments that require
ruggedized equipment capable of operating in severe
temperature extremes. These switches are an affordable
PoE Power Source Equipment (PSE) solution for outdoor
environments, transportation roadside systems, shop
floors, and other environments where consistent
operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. To ensure high reliability,
these switches are tested for functional operation to
-40°F to 185°F (-40°C to 85°C). These unmanaged
switches are compact, plug-and-play devices that do
not require complex user setup.
䡲
ORDERING INFORMATION
The 065-77xxHPOEP series 10/100 Managed Hardened Industrial Power over Ethernet
Plus (PoE+) DIN-rail Mount Switches were developed to operate and provide reliable
power to a mix of up to 4 PoE and 4 PoE+ (30 watt) Powered Devices (PDs) and Fiber
connectivity in harsh environments. These switches are an affordable, high density PoE
Power Source Equipment (PSE) solution for outdoor environments such as perimeter
surveillance, transportation roadside systems, shop floors, and other harsh
environments where consistent operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. Tested for functional operation to -40°F to 185°F (-40°C
to 85°C). The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3,
Web Browser, Telnet or Local Console access. Recover-Ring™ capability allows
redundant ring network recovery in <20 ms.
PART NO.
DESCRIPTION
065-7706HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 2 Gigabit SFP Ports
065-7705HPOEP
065-7710HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 1 Gigabit SFP Port
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at PoE+ (at full 30 watts power per
port) plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 -1000Base
SFP ports.
065-7710H6POEP 8-RJ-45 10/100BaseT/TX ports; 6 ports supporting IEEE 802.3at Power over Ethernet (PoE+) at full
30 watts power per port, plus 2 -1000Base SFP ports.
065-7712HPOEP
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at (PoE+) at full 30 watts power per
port plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 - 100Base SFP
ports and 2 -1000Base SFP ports.
Meets NEMA TS1 and TS2 Environmental Requirements for Traffic
Control Equipment.
Meets IEC61000-6-2 EMC Generic Standard Immunity for Industrial Environment.
Supports IEEE 802.3af Power over Ethernet (PoE) as Power Source
Equipment. (PSE)
1024 MAC Addresses, 1 Mbit Buffer Memory, Full Wire-Speed Performance.
Alarms for Power Failure and Port Link Failure via Relay Output.
Redundant 48 V DC Terminal Block Power Inputs. (Hardened external
power supply sold separately.)
Supports DIN-rail or Panel Mount installations.
ORDERING INFORMATION
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) DIN-rail Mount Switches
065-1050GSXLC 10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; LC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
065-1052SC
Hardened Industrial Unmanaged PoE Switches
The 065-7708HPOEP is equipped with six 10/100BaseT/TX RJ45 ports, four of which
support the new IEEE 802.3at PoE+ (30 watt) standard, and two Gigabit Dual Media
ports in a compact package that offers a variety of mounting options. The 065-7708HPOEP Managed Hardened PoE+
Industrial Switch is certified from -40° F to 167° F (-40°C to 75° C), and is tested from: -40° F to 185° F (-40° C to 85° C).
The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3, Web Browser, Telnet or Local Console access.
065-79SXMG-H
The 065-1052SC is a PoE Powered Device (PD) media converter. It receives its
operating power over the copper RJ-45 data port from a PoE switch, avoiding the
need for a separate media converter power supply.
1-Port Gigabit-Capable PoE/PoE+ Power Injector
The 065-7708HPOEP Managed Hardened PoE+ Industrial Switch is designed to
operate in rugged environments with extreme temperature conditions and features
Recover-Ring™ technology allowing redundant ring network recovery in less than
20 ms, making this an ideal switch for perimeter security and other highly sensitive
surveillance applications.
ORDERING INFORMATION
Broadcast/Multicast Storm Control
DESCRIPTION
065-7726SPOE
10/100 to 100FX PoE+ PSE DIN-Rail Mount Hardened
Media Converters
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) Desktop Switch
PART NO.
065-7408PTB
065-7408P1FXSCTB
065-7408P1FXSTTB
065-7408P1FXSMTB
DESCRIPTION
Unmanaged Hardened Switch with 8 10/100BaseT/TX
ports (4 ports PoE PSE-capable), 48 V DC Redundant
Power Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, ST
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Singlemode port, 20 km Span, 48 V DC Redundant
Power Terminal Block (extended distance versions are
available by special order)
Required 48 VDC Power Supply sold separately; please see www.signamax.com
for 75, 120, 240, or 480 watt models to support connected loads.
16-port 10/100 PoE / PoE+ Unmanaged Hardened Switch
plus 2 Dual Media Gigabit Ethernet Ports
The 065-7418POETB Hardened Unmanaged PoE Ethernet
Switch provides an affordable High Density solution for rugged
and outdoor environments such as transportation roadside
cabinets, Perimeter Surveillance, industrial shop floors,
multi-tenant dwellings or Fiber To The Home (FTTH)
applications where IEEE 802.3af Power over Ethernet (PoE)
or IEEE 802.3at Power over Ethernet + (PoE+) support is
required to support up to 16 IP-PD devices such as cameras,
wireless access points, and access control devices. Capable
of operating at temperature extremes of -40º F to 167º F (-40º
C to 75º C), this is the switch of choice for harsh environments.
Port 1 to port 16 on this Switch support PoE or PoE+-compliant
Powered Devices (PDs) in any mix. External 47~57 VDC
Terminal Block power inputs accept power supplies up to
480 watts (sold separately), Gigabit Ethernet Dual Media
10/100/1000 / SFP ports permit high-speed backhaul to the
Network, Video Recorders (NVRs) and other servers
supporting these applications.
ORDERING INFORMATION
PART NO.
065-7418POETB
DESCRIPTION
16-port 10/100 PoE / PoE+ Hardened
Unmanaged Switch + 2 Gigabit Dual
Media Ports
Required 48 VDC Power Supply sold separately; please
see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
Notes:
• Optional Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
TM
NETWORK CONNECTIVITY SYSTEMS
PoE Media Converters
PoE Ethernet Switches
PoE Media Converters
24-Port 10/100BaseT/TX Stackable Managed PoE
Switches + 2 SFP/RJ-45 Ports
The 065-7726SPOE and 065-7726SPOE-FP 10/100 PoE Stacking Switch
with Gigabit dual media access ports provide the capability to remotely power
IP cameras, wireless access points, VoIP telephones, and other devices that
meet the IEEE 802.3af PoE standard. These switches provide non-blocking
performance for two 10/100/1000BaseT/TX Dual Media Gigabit Ethernet
ports plus 24 10/100BaseT/TX PoE-equipped ports. The 065-7726SPOE
and 065-7726SPOE-FP switches share the same SNMP management
package. Both ring and star Gigabit backbone network architectures are
possible with full automatic failover AND PoE extension to every workstation.
Enhanced Layer 3 look-ahead routing features and IEEE 802.1p Quality of
Service/ 802.1Q Tagged VLAN / IP Type of Service support make the
Signamax 065-7726SPOE and 065-7726SPOE-FP switches the costeffective choices for creating an infrastructure capable of supporting IP
cameras, Voice over IP telephony, and wireless access.
ORDERING INFORMATION
PART NO.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
PoE, To Save Power Infrastructure Costs
Isolated Group Feature for Secure Port Segregation
2 Dual Media Ports for Flexible Fiber Connection
Port Mirroring for Enhanced Network Monitoring
065-7726SPOE Model Supports 24 PoE Class 1 or 2 Devices;
065-7726SPOE-FP Model Supports 24 PoE Class 1, 2, 3 or
Class 0 Devices
802.3ad Port Trunking with Automatic Link Fail-Over for
Bandwidth Aggregation
QoS Supports 4 Priority Queues
802.1x Access Control Improves Network Security
802.1D Compatible & 802.1w Rapid Spanning Tree
Q-in-Q VLAN for Performance & Security
24-Port 10/100 Managed PoE Switch + 2 SFP/RJ-45 Dual Media Ports
065-7726SPOE-FP 24-Port 10/100 Managed Full-Power PoE Switch + 2 SFP/RJ-45
Dual Media Ports
SFP Modules are sold separately. Please see the SFP module section
at www.signamax.com for SFP fiber module options.
8-Port 10/100BaseT/TX Full-Power PoE Switch
with 8 PoE Ports
The 065-7308POE-FP 8-Port 10/100BaseT/TX Power over Ethernet (PoE)
Full-Power switch provides the capability to remotely power up to eight IP
cameras, wireless access points, VoIP telephones, Powered Device (PD)
media converters, and other devices that meet the IEEE 802.1af PoE standard
at full Power Class 1,2, 3 or 0 power levels, simultaneously. This switch
provides non-blocking performance to all 8 unmanaged 10/100BaseT/TX
ports, all of which are PoE-equipped. The 065-7308POE-FP switch allows
cost-effective PoE extension to smaller offices and workgroups.
ORDERING INFORMATION
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
Supports IEEE 802.3af Power over Ethernet standard
as PSE on all eight PoE-TP ports (End-Point).
Full power (15.4w) support for all PoE-TP ports
simultaneously; 124 Watts of PoE power available.
Auto-detection of powered devices and power
consumption levels.
Non-blocking, wire-speed switching matrix.
All ports are Auto-MDIX and Auto-Negotiating.
LED indicators for data and POE activity.
PART NO.
DESCRIPTION
065-7308POE-FPRM
Rack Mount Kit for 065-7308POE-FP Switch
065-7308POE-FP
The 065-18xxZ series 10/100 to 100BaseFX PoE+ Power
Source Equipment (PSE) Industrial Media Converters are
an affordable solution developed to operate in harsh
environments that require ruggedized equipment operating
in wide temperature extremes of -14°F to 140°F (-10°C to
60°C, tested from -4°F to 158°F [-20°C to 70°C]). These
media converters support and provide power to both IEEE
802.3af PoE and IEEE 802.3at PoE+ Powered Devices
such as IP cameras, Access Control Devices, and Wireless
Access Points, and are compact, plug-and-play devices that
do not require complex user setup with DIP switch
configuration for “Link-Fault-Pass-Through”, speed and
duplex mode. The 48 V DC terminal block accepts DC
power from a local power supply.
8-Port 10/100BaseT/TX Full-Power PoE Switch with 8 PoE Ports
TM
NETWORK CONNECTIVITY SYSTEMS
10/100 TO 100BaseFX Power over Ethernet
Fiber Media Converters
The 065-1050 series
media converters are
10/100BaseT/TX to
100BaseFX Power over
Ethernet (PoE) devices
that serve as Power
Sourcing Equipment
(PSE) providing power to
IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using a TP cable.
This AC-powered PoE media converter combines data received over a fiber optic
link with PoE power, which the PD can use in lieu of a separate power connector.
The 065-1050 converters feature PD signature-sensing, power monitoring, overcurrent protection, under-current detection, input fault protection and Link Fault
Signaling (LFS) allowing the monitoring of both the fiber and copper ports for loss
of signal and preventing the loss of data when trying to transmit over a failed link.
PART NO.
DESCRIPTION
065-1800Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, ST Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1810Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1820Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Singlemode, 15 km Span,
48 V DC Power Terminal Block
Required 48 VDC Power Supply sold separately; please see
www.signamax.com for 75, 120, 240, or 480 watt models to
support connected loads.
ORDERING INFORMATION
PART NO.
The NEW 065-POEINJ-G 1-port Gigabit-capable
PoE/PoE+ Power Injector is a compact and cost
effective full IEEE 802.3at (30 watts) and IEEE
802.3af (15.4 watts) compliant solution for Network
Cameras, IP phones, Wireless Access Points, and
other IP terminal installations. Unlike many
competing products, the 065-POEINJ-G supports
a 10/100/1000BaseT/TX RJ45 connection utilizing
phantom power over RJ45 pins 4, 5, 7, and 8, and comes in a compact package for
wall or desktop mounting. The 065-POEINJ-G injector operates at temperatures
ranging from 14° F to 104° F (-10° C to 40° C). This rugged, compact, and costeffective PoE/PoE+ power injector is the easy answer for individual PoE or PoE+
deployments where PoE switches may not be appropriate.
DESCRIPTION
065-1050SC
10/100BaseT/TX to 100BaseFX PoE (PSE)
Media Converter; SC Multimode, 2 km Span
065-1050GSX
10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; SC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
ORDERING INFORMATION
PART NO.
DESCRIPTION
065-7708HPOEP
6-Port 10/100 (4 PoE+ ports) Hardened Managed Switch + 2 SFP/RJ-45 Gigabit Dual Media Ports
065-7708HRM
19 inch rack mounting hardware for 065-7708HPOEP
065-7708HPM
065-79LXMG-H
Panel mounting hardware for 065-7708HPOEP
1000BaseSX Hardened SFP Module 850 nm – MM/LC, 220 m Span on 62.5µm Fiber / 550 m Span
on 50µm Fiber, -40° F to 185° F (-40° C to 85° C) operation
1000BaseLX Hardened SFP Module 1310 nm – SM/LC, 10 km, -40° F to 185° F (-40° C to 85° C)
operation
Notes:
• Optional Mounting Hardware and Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
10/100BaseT/TX to 100BaseFX PoE (PD)
Media Converter; SC Multimode, 2 km Span
Note: Minimum Order Quantities
may apply to these products.
ORDERING INFORMATION
PART NO.
065-POEINJ-G
DESCRIPTION
1-Port 10/100/1000 PoE/PoE+
Power Injector
Available early February, 2014.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
The 065-7408 series is a low cost unmanaged s
witch option when your project calls for up to 8 10/100
Copper ports and up to 1 100Base FX Fiber port. This
Hardened Industrial DIN-rail Mount Switch has been
developed to operate and provide reliable power to up to
4 PoE (Power over Ethernet) Powered Devices (PDs) in
harsh industrial and municipal environments that require
ruggedized equipment capable of operating in severe
temperature extremes. These switches are an affordable
PoE Power Source Equipment (PSE) solution for outdoor
environments, transportation roadside systems, shop
floors, and other environments where consistent
operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. To ensure high reliability,
these switches are tested for functional operation to
-40°F to 185°F (-40°C to 85°C). These unmanaged
switches are compact, plug-and-play devices that do
not require complex user setup.
䡲
ORDERING INFORMATION
The 065-77xxHPOEP series 10/100 Managed Hardened Industrial Power over Ethernet
Plus (PoE+) DIN-rail Mount Switches were developed to operate and provide reliable
power to a mix of up to 4 PoE and 4 PoE+ (30 watt) Powered Devices (PDs) and Fiber
connectivity in harsh environments. These switches are an affordable, high density PoE
Power Source Equipment (PSE) solution for outdoor environments such as perimeter
surveillance, transportation roadside systems, shop floors, and other harsh
environments where consistent operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. Tested for functional operation to -40°F to 185°F (-40°C
to 85°C). The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3,
Web Browser, Telnet or Local Console access. Recover-Ring™ capability allows
redundant ring network recovery in <20 ms.
PART NO.
DESCRIPTION
065-7706HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 2 Gigabit SFP Ports
065-7705HPOEP
065-7710HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 1 Gigabit SFP Port
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at PoE+ (at full 30 watts power per
port) plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 -1000Base
SFP ports.
065-7710H6POEP 8-RJ-45 10/100BaseT/TX ports; 6 ports supporting IEEE 802.3at Power over Ethernet (PoE+) at full
30 watts power per port, plus 2 -1000Base SFP ports.
065-7712HPOEP
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at (PoE+) at full 30 watts power per
port plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 - 100Base SFP
ports and 2 -1000Base SFP ports.
Meets NEMA TS1 and TS2 Environmental Requirements for Traffic
Control Equipment.
Meets IEC61000-6-2 EMC Generic Standard Immunity for Industrial Environment.
Supports IEEE 802.3af Power over Ethernet (PoE) as Power Source
Equipment. (PSE)
1024 MAC Addresses, 1 Mbit Buffer Memory, Full Wire-Speed Performance.
Alarms for Power Failure and Port Link Failure via Relay Output.
Redundant 48 V DC Terminal Block Power Inputs. (Hardened external
power supply sold separately.)
Supports DIN-rail or Panel Mount installations.
ORDERING INFORMATION
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) DIN-rail Mount Switches
065-1050GSXLC 10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; LC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
065-1052SC
Hardened Industrial Unmanaged PoE Switches
The 065-7708HPOEP is equipped with six 10/100BaseT/TX RJ45 ports, four of which
support the new IEEE 802.3at PoE+ (30 watt) standard, and two Gigabit Dual Media
ports in a compact package that offers a variety of mounting options. The 065-7708HPOEP Managed Hardened PoE+
Industrial Switch is certified from -40° F to 167° F (-40°C to 75° C), and is tested from: -40° F to 185° F (-40° C to 85° C).
The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3, Web Browser, Telnet or Local Console access.
065-79SXMG-H
The 065-1052SC is a PoE Powered Device (PD) media converter. It receives its
operating power over the copper RJ-45 data port from a PoE switch, avoiding the
need for a separate media converter power supply.
1-Port Gigabit-Capable PoE/PoE+ Power Injector
The 065-7708HPOEP Managed Hardened PoE+ Industrial Switch is designed to
operate in rugged environments with extreme temperature conditions and features
Recover-Ring™ technology allowing redundant ring network recovery in less than
20 ms, making this an ideal switch for perimeter security and other highly sensitive
surveillance applications.
ORDERING INFORMATION
Broadcast/Multicast Storm Control
DESCRIPTION
065-7726SPOE
10/100 to 100FX PoE+ PSE DIN-Rail Mount Hardened
Media Converters
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) Desktop Switch
PART NO.
065-7408PTB
065-7408P1FXSCTB
065-7408P1FXSTTB
065-7408P1FXSMTB
DESCRIPTION
Unmanaged Hardened Switch with 8 10/100BaseT/TX
ports (4 ports PoE PSE-capable), 48 V DC Redundant
Power Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, ST
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Singlemode port, 20 km Span, 48 V DC Redundant
Power Terminal Block (extended distance versions are
available by special order)
Required 48 VDC Power Supply sold separately; please see www.signamax.com
for 75, 120, 240, or 480 watt models to support connected loads.
16-port 10/100 PoE / PoE+ Unmanaged Hardened Switch
plus 2 Dual Media Gigabit Ethernet Ports
The 065-7418POETB Hardened Unmanaged PoE Ethernet
Switch provides an affordable High Density solution for rugged
and outdoor environments such as transportation roadside
cabinets, Perimeter Surveillance, industrial shop floors,
multi-tenant dwellings or Fiber To The Home (FTTH)
applications where IEEE 802.3af Power over Ethernet (PoE)
or IEEE 802.3at Power over Ethernet + (PoE+) support is
required to support up to 16 IP-PD devices such as cameras,
wireless access points, and access control devices. Capable
of operating at temperature extremes of -40º F to 167º F (-40º
C to 75º C), this is the switch of choice for harsh environments.
Port 1 to port 16 on this Switch support PoE or PoE+-compliant
Powered Devices (PDs) in any mix. External 47~57 VDC
Terminal Block power inputs accept power supplies up to
480 watts (sold separately), Gigabit Ethernet Dual Media
10/100/1000 / SFP ports permit high-speed backhaul to the
Network, Video Recorders (NVRs) and other servers
supporting these applications.
ORDERING INFORMATION
PART NO.
065-7418POETB
DESCRIPTION
16-port 10/100 PoE / PoE+ Hardened
Unmanaged Switch + 2 Gigabit Dual
Media Ports
Required 48 VDC Power Supply sold separately; please
see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
Notes:
• Optional Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
TM
NETWORK CONNECTIVITY SYSTEMS
PoE Media Converters
PoE Ethernet Switches
PoE Media Converters
24-Port 10/100BaseT/TX Stackable Managed PoE
Switches + 2 SFP/RJ-45 Ports
The 065-7726SPOE and 065-7726SPOE-FP 10/100 PoE Stacking Switch
with Gigabit dual media access ports provide the capability to remotely power
IP cameras, wireless access points, VoIP telephones, and other devices that
meet the IEEE 802.3af PoE standard. These switches provide non-blocking
performance for two 10/100/1000BaseT/TX Dual Media Gigabit Ethernet
ports plus 24 10/100BaseT/TX PoE-equipped ports. The 065-7726SPOE
and 065-7726SPOE-FP switches share the same SNMP management
package. Both ring and star Gigabit backbone network architectures are
possible with full automatic failover AND PoE extension to every workstation.
Enhanced Layer 3 look-ahead routing features and IEEE 802.1p Quality of
Service/ 802.1Q Tagged VLAN / IP Type of Service support make the
Signamax 065-7726SPOE and 065-7726SPOE-FP switches the costeffective choices for creating an infrastructure capable of supporting IP
cameras, Voice over IP telephony, and wireless access.
ORDERING INFORMATION
PART NO.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
PoE, To Save Power Infrastructure Costs
Isolated Group Feature for Secure Port Segregation
2 Dual Media Ports for Flexible Fiber Connection
Port Mirroring for Enhanced Network Monitoring
065-7726SPOE Model Supports 24 PoE Class 1 or 2 Devices;
065-7726SPOE-FP Model Supports 24 PoE Class 1, 2, 3 or
Class 0 Devices
802.3ad Port Trunking with Automatic Link Fail-Over for
Bandwidth Aggregation
QoS Supports 4 Priority Queues
802.1x Access Control Improves Network Security
802.1D Compatible & 802.1w Rapid Spanning Tree
Q-in-Q VLAN for Performance & Security
24-Port 10/100 Managed PoE Switch + 2 SFP/RJ-45 Dual Media Ports
065-7726SPOE-FP 24-Port 10/100 Managed Full-Power PoE Switch + 2 SFP/RJ-45
Dual Media Ports
SFP Modules are sold separately. Please see the SFP module section
at www.signamax.com for SFP fiber module options.
8-Port 10/100BaseT/TX Full-Power PoE Switch
with 8 PoE Ports
The 065-7308POE-FP 8-Port 10/100BaseT/TX Power over Ethernet (PoE)
Full-Power switch provides the capability to remotely power up to eight IP
cameras, wireless access points, VoIP telephones, Powered Device (PD)
media converters, and other devices that meet the IEEE 802.1af PoE standard
at full Power Class 1,2, 3 or 0 power levels, simultaneously. This switch
provides non-blocking performance to all 8 unmanaged 10/100BaseT/TX
ports, all of which are PoE-equipped. The 065-7308POE-FP switch allows
cost-effective PoE extension to smaller offices and workgroups.
ORDERING INFORMATION
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
Supports IEEE 802.3af Power over Ethernet standard
as PSE on all eight PoE-TP ports (End-Point).
Full power (15.4w) support for all PoE-TP ports
simultaneously; 124 Watts of PoE power available.
Auto-detection of powered devices and power
consumption levels.
Non-blocking, wire-speed switching matrix.
All ports are Auto-MDIX and Auto-Negotiating.
LED indicators for data and POE activity.
PART NO.
DESCRIPTION
065-7308POE-FPRM
Rack Mount Kit for 065-7308POE-FP Switch
065-7308POE-FP
The 065-18xxZ series 10/100 to 100BaseFX PoE+ Power
Source Equipment (PSE) Industrial Media Converters are
an affordable solution developed to operate in harsh
environments that require ruggedized equipment operating
in wide temperature extremes of -14°F to 140°F (-10°C to
60°C, tested from -4°F to 158°F [-20°C to 70°C]). These
media converters support and provide power to both IEEE
802.3af PoE and IEEE 802.3at PoE+ Powered Devices
such as IP cameras, Access Control Devices, and Wireless
Access Points, and are compact, plug-and-play devices that
do not require complex user setup with DIP switch
configuration for “Link-Fault-Pass-Through”, speed and
duplex mode. The 48 V DC terminal block accepts DC
power from a local power supply.
8-Port 10/100BaseT/TX Full-Power PoE Switch with 8 PoE Ports
TM
NETWORK CONNECTIVITY SYSTEMS
10/100 TO 100BaseFX Power over Ethernet
Fiber Media Converters
The 065-1050 series
media converters are
10/100BaseT/TX to
100BaseFX Power over
Ethernet (PoE) devices
that serve as Power
Sourcing Equipment
(PSE) providing power to
IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using a TP cable.
This AC-powered PoE media converter combines data received over a fiber optic
link with PoE power, which the PD can use in lieu of a separate power connector.
The 065-1050 converters feature PD signature-sensing, power monitoring, overcurrent protection, under-current detection, input fault protection and Link Fault
Signaling (LFS) allowing the monitoring of both the fiber and copper ports for loss
of signal and preventing the loss of data when trying to transmit over a failed link.
PART NO.
DESCRIPTION
065-1800Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, ST Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1810Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1820Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Singlemode, 15 km Span,
48 V DC Power Terminal Block
Required 48 VDC Power Supply sold separately; please see
www.signamax.com for 75, 120, 240, or 480 watt models to
support connected loads.
ORDERING INFORMATION
PART NO.
The NEW 065-POEINJ-G 1-port Gigabit-capable
PoE/PoE+ Power Injector is a compact and cost
effective full IEEE 802.3at (30 watts) and IEEE
802.3af (15.4 watts) compliant solution for Network
Cameras, IP phones, Wireless Access Points, and
other IP terminal installations. Unlike many
competing products, the 065-POEINJ-G supports
a 10/100/1000BaseT/TX RJ45 connection utilizing
phantom power over RJ45 pins 4, 5, 7, and 8, and comes in a compact package for
wall or desktop mounting. The 065-POEINJ-G injector operates at temperatures
ranging from 14° F to 104° F (-10° C to 40° C). This rugged, compact, and costeffective PoE/PoE+ power injector is the easy answer for individual PoE or PoE+
deployments where PoE switches may not be appropriate.
DESCRIPTION
065-1050SC
10/100BaseT/TX to 100BaseFX PoE (PSE)
Media Converter; SC Multimode, 2 km Span
065-1050GSX
10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; SC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
ORDERING INFORMATION
PART NO.
DESCRIPTION
065-7708HPOEP
6-Port 10/100 (4 PoE+ ports) Hardened Managed Switch + 2 SFP/RJ-45 Gigabit Dual Media Ports
065-7708HRM
19 inch rack mounting hardware for 065-7708HPOEP
065-7708HPM
065-79LXMG-H
Panel mounting hardware for 065-7708HPOEP
1000BaseSX Hardened SFP Module 850 nm – MM/LC, 220 m Span on 62.5µm Fiber / 550 m Span
on 50µm Fiber, -40° F to 185° F (-40° C to 85° C) operation
1000BaseLX Hardened SFP Module 1310 nm – SM/LC, 10 km, -40° F to 185° F (-40° C to 85° C)
operation
Notes:
• Optional Mounting Hardware and Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
10/100BaseT/TX to 100BaseFX PoE (PD)
Media Converter; SC Multimode, 2 km Span
Note: Minimum Order Quantities
may apply to these products.
ORDERING INFORMATION
PART NO.
065-POEINJ-G
DESCRIPTION
1-Port 10/100/1000 PoE/PoE+
Power Injector
Available early February, 2014.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
The 065-7408 series is a low cost unmanaged s
witch option when your project calls for up to 8 10/100
Copper ports and up to 1 100Base FX Fiber port. This
Hardened Industrial DIN-rail Mount Switch has been
developed to operate and provide reliable power to up to
4 PoE (Power over Ethernet) Powered Devices (PDs) in
harsh industrial and municipal environments that require
ruggedized equipment capable of operating in severe
temperature extremes. These switches are an affordable
PoE Power Source Equipment (PSE) solution for outdoor
environments, transportation roadside systems, shop
floors, and other environments where consistent
operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. To ensure high reliability,
these switches are tested for functional operation to
-40°F to 185°F (-40°C to 85°C). These unmanaged
switches are compact, plug-and-play devices that do
not require complex user setup.
䡲
ORDERING INFORMATION
The 065-77xxHPOEP series 10/100 Managed Hardened Industrial Power over Ethernet
Plus (PoE+) DIN-rail Mount Switches were developed to operate and provide reliable
power to a mix of up to 4 PoE and 4 PoE+ (30 watt) Powered Devices (PDs) and Fiber
connectivity in harsh environments. These switches are an affordable, high density PoE
Power Source Equipment (PSE) solution for outdoor environments such as perimeter
surveillance, transportation roadside systems, shop floors, and other harsh
environments where consistent operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. Tested for functional operation to -40°F to 185°F (-40°C
to 85°C). The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3,
Web Browser, Telnet or Local Console access. Recover-Ring™ capability allows
redundant ring network recovery in <20 ms.
PART NO.
DESCRIPTION
065-7706HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 2 Gigabit SFP Ports
065-7705HPOEP
065-7710HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 1 Gigabit SFP Port
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at PoE+ (at full 30 watts power per
port) plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 -1000Base
SFP ports.
065-7710H6POEP 8-RJ-45 10/100BaseT/TX ports; 6 ports supporting IEEE 802.3at Power over Ethernet (PoE+) at full
30 watts power per port, plus 2 -1000Base SFP ports.
065-7712HPOEP
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at (PoE+) at full 30 watts power per
port plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 - 100Base SFP
ports and 2 -1000Base SFP ports.
Meets NEMA TS1 and TS2 Environmental Requirements for Traffic
Control Equipment.
Meets IEC61000-6-2 EMC Generic Standard Immunity for Industrial Environment.
Supports IEEE 802.3af Power over Ethernet (PoE) as Power Source
Equipment. (PSE)
1024 MAC Addresses, 1 Mbit Buffer Memory, Full Wire-Speed Performance.
Alarms for Power Failure and Port Link Failure via Relay Output.
Redundant 48 V DC Terminal Block Power Inputs. (Hardened external
power supply sold separately.)
Supports DIN-rail or Panel Mount installations.
ORDERING INFORMATION
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) DIN-rail Mount Switches
065-1050GSXLC 10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; LC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
065-1052SC
Hardened Industrial Unmanaged PoE Switches
The 065-7708HPOEP is equipped with six 10/100BaseT/TX RJ45 ports, four of which
support the new IEEE 802.3at PoE+ (30 watt) standard, and two Gigabit Dual Media
ports in a compact package that offers a variety of mounting options. The 065-7708HPOEP Managed Hardened PoE+
Industrial Switch is certified from -40° F to 167° F (-40°C to 75° C), and is tested from: -40° F to 185° F (-40° C to 85° C).
The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3, Web Browser, Telnet or Local Console access.
065-79SXMG-H
The 065-1052SC is a PoE Powered Device (PD) media converter. It receives its
operating power over the copper RJ-45 data port from a PoE switch, avoiding the
need for a separate media converter power supply.
1-Port Gigabit-Capable PoE/PoE+ Power Injector
The 065-7708HPOEP Managed Hardened PoE+ Industrial Switch is designed to
operate in rugged environments with extreme temperature conditions and features
Recover-Ring™ technology allowing redundant ring network recovery in less than
20 ms, making this an ideal switch for perimeter security and other highly sensitive
surveillance applications.
ORDERING INFORMATION
Broadcast/Multicast Storm Control
DESCRIPTION
065-7726SPOE
10/100 to 100FX PoE+ PSE DIN-Rail Mount Hardened
Media Converters
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) Desktop Switch
PART NO.
065-7408PTB
065-7408P1FXSCTB
065-7408P1FXSTTB
065-7408P1FXSMTB
DESCRIPTION
Unmanaged Hardened Switch with 8 10/100BaseT/TX
ports (4 ports PoE PSE-capable), 48 V DC Redundant
Power Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, ST
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Singlemode port, 20 km Span, 48 V DC Redundant
Power Terminal Block (extended distance versions are
available by special order)
Required 48 VDC Power Supply sold separately; please see www.signamax.com
for 75, 120, 240, or 480 watt models to support connected loads.
16-port 10/100 PoE / PoE+ Unmanaged Hardened Switch
plus 2 Dual Media Gigabit Ethernet Ports
The 065-7418POETB Hardened Unmanaged PoE Ethernet
Switch provides an affordable High Density solution for rugged
and outdoor environments such as transportation roadside
cabinets, Perimeter Surveillance, industrial shop floors,
multi-tenant dwellings or Fiber To The Home (FTTH)
applications where IEEE 802.3af Power over Ethernet (PoE)
or IEEE 802.3at Power over Ethernet + (PoE+) support is
required to support up to 16 IP-PD devices such as cameras,
wireless access points, and access control devices. Capable
of operating at temperature extremes of -40º F to 167º F (-40º
C to 75º C), this is the switch of choice for harsh environments.
Port 1 to port 16 on this Switch support PoE or PoE+-compliant
Powered Devices (PDs) in any mix. External 47~57 VDC
Terminal Block power inputs accept power supplies up to
480 watts (sold separately), Gigabit Ethernet Dual Media
10/100/1000 / SFP ports permit high-speed backhaul to the
Network, Video Recorders (NVRs) and other servers
supporting these applications.
ORDERING INFORMATION
PART NO.
065-7418POETB
DESCRIPTION
16-port 10/100 PoE / PoE+ Hardened
Unmanaged Switch + 2 Gigabit Dual
Media Ports
Required 48 VDC Power Supply sold separately; please
see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
Notes:
• Optional Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
TM
NETWORK CONNECTIVITY SYSTEMS
PoE Media Converters
PoE Ethernet Switches
PoE Media Converters
24-Port 10/100BaseT/TX Stackable Managed PoE
Switches + 2 SFP/RJ-45 Ports
The 065-7726SPOE and 065-7726SPOE-FP 10/100 PoE Stacking Switch
with Gigabit dual media access ports provide the capability to remotely power
IP cameras, wireless access points, VoIP telephones, and other devices that
meet the IEEE 802.3af PoE standard. These switches provide non-blocking
performance for two 10/100/1000BaseT/TX Dual Media Gigabit Ethernet
ports plus 24 10/100BaseT/TX PoE-equipped ports. The 065-7726SPOE
and 065-7726SPOE-FP switches share the same SNMP management
package. Both ring and star Gigabit backbone network architectures are
possible with full automatic failover AND PoE extension to every workstation.
Enhanced Layer 3 look-ahead routing features and IEEE 802.1p Quality of
Service/ 802.1Q Tagged VLAN / IP Type of Service support make the
Signamax 065-7726SPOE and 065-7726SPOE-FP switches the costeffective choices for creating an infrastructure capable of supporting IP
cameras, Voice over IP telephony, and wireless access.
ORDERING INFORMATION
PART NO.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
PoE, To Save Power Infrastructure Costs
Isolated Group Feature for Secure Port Segregation
2 Dual Media Ports for Flexible Fiber Connection
Port Mirroring for Enhanced Network Monitoring
065-7726SPOE Model Supports 24 PoE Class 1 or 2 Devices;
065-7726SPOE-FP Model Supports 24 PoE Class 1, 2, 3 or
Class 0 Devices
802.3ad Port Trunking with Automatic Link Fail-Over for
Bandwidth Aggregation
QoS Supports 4 Priority Queues
802.1x Access Control Improves Network Security
802.1D Compatible & 802.1w Rapid Spanning Tree
Q-in-Q VLAN for Performance & Security
24-Port 10/100 Managed PoE Switch + 2 SFP/RJ-45 Dual Media Ports
065-7726SPOE-FP 24-Port 10/100 Managed Full-Power PoE Switch + 2 SFP/RJ-45
Dual Media Ports
SFP Modules are sold separately. Please see the SFP module section
at www.signamax.com for SFP fiber module options.
8-Port 10/100BaseT/TX Full-Power PoE Switch
with 8 PoE Ports
The 065-7308POE-FP 8-Port 10/100BaseT/TX Power over Ethernet (PoE)
Full-Power switch provides the capability to remotely power up to eight IP
cameras, wireless access points, VoIP telephones, Powered Device (PD)
media converters, and other devices that meet the IEEE 802.1af PoE standard
at full Power Class 1,2, 3 or 0 power levels, simultaneously. This switch
provides non-blocking performance to all 8 unmanaged 10/100BaseT/TX
ports, all of which are PoE-equipped. The 065-7308POE-FP switch allows
cost-effective PoE extension to smaller offices and workgroups.
ORDERING INFORMATION
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
Supports IEEE 802.3af Power over Ethernet standard
as PSE on all eight PoE-TP ports (End-Point).
Full power (15.4w) support for all PoE-TP ports
simultaneously; 124 Watts of PoE power available.
Auto-detection of powered devices and power
consumption levels.
Non-blocking, wire-speed switching matrix.
All ports are Auto-MDIX and Auto-Negotiating.
LED indicators for data and POE activity.
PART NO.
DESCRIPTION
065-7308POE-FPRM
Rack Mount Kit for 065-7308POE-FP Switch
065-7308POE-FP
The 065-18xxZ series 10/100 to 100BaseFX PoE+ Power
Source Equipment (PSE) Industrial Media Converters are
an affordable solution developed to operate in harsh
environments that require ruggedized equipment operating
in wide temperature extremes of -14°F to 140°F (-10°C to
60°C, tested from -4°F to 158°F [-20°C to 70°C]). These
media converters support and provide power to both IEEE
802.3af PoE and IEEE 802.3at PoE+ Powered Devices
such as IP cameras, Access Control Devices, and Wireless
Access Points, and are compact, plug-and-play devices that
do not require complex user setup with DIP switch
configuration for “Link-Fault-Pass-Through”, speed and
duplex mode. The 48 V DC terminal block accepts DC
power from a local power supply.
8-Port 10/100BaseT/TX Full-Power PoE Switch with 8 PoE Ports
TM
NETWORK CONNECTIVITY SYSTEMS
10/100 TO 100BaseFX Power over Ethernet
Fiber Media Converters
The 065-1050 series
media converters are
10/100BaseT/TX to
100BaseFX Power over
Ethernet (PoE) devices
that serve as Power
Sourcing Equipment
(PSE) providing power to
IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using a TP cable.
This AC-powered PoE media converter combines data received over a fiber optic
link with PoE power, which the PD can use in lieu of a separate power connector.
The 065-1050 converters feature PD signature-sensing, power monitoring, overcurrent protection, under-current detection, input fault protection and Link Fault
Signaling (LFS) allowing the monitoring of both the fiber and copper ports for loss
of signal and preventing the loss of data when trying to transmit over a failed link.
PART NO.
DESCRIPTION
065-1800Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, ST Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1810Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Multimode, 2 km Span,
48 V DC Power Terminal Block
065-1820Z
10/100BaseT/TX to 100BaseFX Industrial
Media Converter, SC Singlemode, 15 km Span,
48 V DC Power Terminal Block
Required 48 VDC Power Supply sold separately; please see
www.signamax.com for 75, 120, 240, or 480 watt models to
support connected loads.
ORDERING INFORMATION
PART NO.
The NEW 065-POEINJ-G 1-port Gigabit-capable
PoE/PoE+ Power Injector is a compact and cost
effective full IEEE 802.3at (30 watts) and IEEE
802.3af (15.4 watts) compliant solution for Network
Cameras, IP phones, Wireless Access Points, and
other IP terminal installations. Unlike many
competing products, the 065-POEINJ-G supports
a 10/100/1000BaseT/TX RJ45 connection utilizing
phantom power over RJ45 pins 4, 5, 7, and 8, and comes in a compact package for
wall or desktop mounting. The 065-POEINJ-G injector operates at temperatures
ranging from 14° F to 104° F (-10° C to 40° C). This rugged, compact, and costeffective PoE/PoE+ power injector is the easy answer for individual PoE or PoE+
deployments where PoE switches may not be appropriate.
DESCRIPTION
065-1050SC
10/100BaseT/TX to 100BaseFX PoE (PSE)
Media Converter; SC Multimode, 2 km Span
065-1050GSX
10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; SC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
ORDERING INFORMATION
PART NO.
DESCRIPTION
065-7708HPOEP
6-Port 10/100 (4 PoE+ ports) Hardened Managed Switch + 2 SFP/RJ-45 Gigabit Dual Media Ports
065-7708HRM
19 inch rack mounting hardware for 065-7708HPOEP
065-7708HPM
065-79LXMG-H
Panel mounting hardware for 065-7708HPOEP
1000BaseSX Hardened SFP Module 850 nm – MM/LC, 220 m Span on 62.5µm Fiber / 550 m Span
on 50µm Fiber, -40° F to 185° F (-40° C to 85° C) operation
1000BaseLX Hardened SFP Module 1310 nm – SM/LC, 10 km, -40° F to 185° F (-40° C to 85° C)
operation
Notes:
• Optional Mounting Hardware and Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
10/100BaseT/TX to 100BaseFX PoE (PD)
Media Converter; SC Multimode, 2 km Span
Note: Minimum Order Quantities
may apply to these products.
ORDERING INFORMATION
PART NO.
065-POEINJ-G
DESCRIPTION
1-Port 10/100/1000 PoE/PoE+
Power Injector
Available early February, 2014.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
The 065-7408 series is a low cost unmanaged s
witch option when your project calls for up to 8 10/100
Copper ports and up to 1 100Base FX Fiber port. This
Hardened Industrial DIN-rail Mount Switch has been
developed to operate and provide reliable power to up to
4 PoE (Power over Ethernet) Powered Devices (PDs) in
harsh industrial and municipal environments that require
ruggedized equipment capable of operating in severe
temperature extremes. These switches are an affordable
PoE Power Source Equipment (PSE) solution for outdoor
environments, transportation roadside systems, shop
floors, and other environments where consistent
operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. To ensure high reliability,
these switches are tested for functional operation to
-40°F to 185°F (-40°C to 85°C). These unmanaged
switches are compact, plug-and-play devices that do
not require complex user setup.
䡲
ORDERING INFORMATION
The 065-77xxHPOEP series 10/100 Managed Hardened Industrial Power over Ethernet
Plus (PoE+) DIN-rail Mount Switches were developed to operate and provide reliable
power to a mix of up to 4 PoE and 4 PoE+ (30 watt) Powered Devices (PDs) and Fiber
connectivity in harsh environments. These switches are an affordable, high density PoE
Power Source Equipment (PSE) solution for outdoor environments such as perimeter
surveillance, transportation roadside systems, shop floors, and other harsh
environments where consistent operation at temperature extremes of -40°F to 167°F
(-40°C to 75°C) is necessary. Tested for functional operation to -40°F to 185°F (-40°C
to 85°C). The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3,
Web Browser, Telnet or Local Console access. Recover-Ring™ capability allows
redundant ring network recovery in <20 ms.
PART NO.
DESCRIPTION
065-7706HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 2 Gigabit SFP Ports
065-7705HPOEP
065-7710HPOEP
4-port 10/100 PoE+ Hardened Managed Switch + 1 Gigabit SFP Port
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at PoE+ (at full 30 watts power per
port) plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 -1000Base
SFP ports.
065-7710H6POEP 8-RJ-45 10/100BaseT/TX ports; 6 ports supporting IEEE 802.3at Power over Ethernet (PoE+) at full
30 watts power per port, plus 2 -1000Base SFP ports.
065-7712HPOEP
8-RJ-45 10/100BaseT/TX ports; 4 ports supporting IEEE 802.3at (PoE+) at full 30 watts power per
port plus 4 ports supporting IEEE 802.3af (PoE) at 15.4 watts power per port, plus 2 - 100Base SFP
ports and 2 -1000Base SFP ports.
Meets NEMA TS1 and TS2 Environmental Requirements for Traffic
Control Equipment.
Meets IEC61000-6-2 EMC Generic Standard Immunity for Industrial Environment.
Supports IEEE 802.3af Power over Ethernet (PoE) as Power Source
Equipment. (PSE)
1024 MAC Addresses, 1 Mbit Buffer Memory, Full Wire-Speed Performance.
Alarms for Power Failure and Port Link Failure via Relay Output.
Redundant 48 V DC Terminal Block Power Inputs. (Hardened external
power supply sold separately.)
Supports DIN-rail or Panel Mount installations.
ORDERING INFORMATION
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) DIN-rail Mount Switches
065-1050GSXLC 10/100/1000BaseT/TX to 1000BaseSX PoE
(PSE) Media Converter; LC Multimode,
220 m Span on 62.5 micron multimode fiber,
550 m span on 50 micron multimode fiber.
SPECIAL ORDER.
065-1052SC
Hardened Industrial Unmanaged PoE Switches
The 065-7708HPOEP is equipped with six 10/100BaseT/TX RJ45 ports, four of which
support the new IEEE 802.3at PoE+ (30 watt) standard, and two Gigabit Dual Media
ports in a compact package that offers a variety of mounting options. The 065-7708HPOEP Managed Hardened PoE+
Industrial Switch is certified from -40° F to 167° F (-40°C to 75° C), and is tested from: -40° F to 185° F (-40° C to 85° C).
The 065-7708HPOEP is a fully managed switch, supporting SNMP v.3, Web Browser, Telnet or Local Console access.
065-79SXMG-H
The 065-1052SC is a PoE Powered Device (PD) media converter. It receives its
operating power over the copper RJ-45 data port from a PoE switch, avoiding the
need for a separate media converter power supply.
1-Port Gigabit-Capable PoE/PoE+ Power Injector
The 065-7708HPOEP Managed Hardened PoE+ Industrial Switch is designed to
operate in rugged environments with extreme temperature conditions and features
Recover-Ring™ technology allowing redundant ring network recovery in less than
20 ms, making this an ideal switch for perimeter security and other highly sensitive
surveillance applications.
ORDERING INFORMATION
Broadcast/Multicast Storm Control
DESCRIPTION
065-7726SPOE
10/100 to 100FX PoE+ PSE DIN-Rail Mount Hardened
Media Converters
10/100 Managed Hardened Industrial Power over Ethernet Plus (PoE+) Desktop Switch
PART NO.
065-7408PTB
065-7408P1FXSCTB
065-7408P1FXSTTB
065-7408P1FXSMTB
DESCRIPTION
Unmanaged Hardened Switch with 8 10/100BaseT/TX
ports (4 ports PoE PSE-capable), 48 V DC Redundant
Power Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, ST
Multimode port, 2 km Span, 48 V DC Redundant Power
Terminal Block
Unmanaged Hardened Switch with 7 10/100BaseT/TX
ports (4 ports PoE PSE-capable) + 1 100BaseFX, SC
Singlemode port, 20 km Span, 48 V DC Redundant
Power Terminal Block (extended distance versions are
available by special order)
Required 48 VDC Power Supply sold separately; please see www.signamax.com
for 75, 120, 240, or 480 watt models to support connected loads.
16-port 10/100 PoE / PoE+ Unmanaged Hardened Switch
plus 2 Dual Media Gigabit Ethernet Ports
The 065-7418POETB Hardened Unmanaged PoE Ethernet
Switch provides an affordable High Density solution for rugged
and outdoor environments such as transportation roadside
cabinets, Perimeter Surveillance, industrial shop floors,
multi-tenant dwellings or Fiber To The Home (FTTH)
applications where IEEE 802.3af Power over Ethernet (PoE)
or IEEE 802.3at Power over Ethernet + (PoE+) support is
required to support up to 16 IP-PD devices such as cameras,
wireless access points, and access control devices. Capable
of operating at temperature extremes of -40º F to 167º F (-40º
C to 75º C), this is the switch of choice for harsh environments.
Port 1 to port 16 on this Switch support PoE or PoE+-compliant
Powered Devices (PDs) in any mix. External 47~57 VDC
Terminal Block power inputs accept power supplies up to
480 watts (sold separately), Gigabit Ethernet Dual Media
10/100/1000 / SFP ports permit high-speed backhaul to the
Network, Video Recorders (NVRs) and other servers
supporting these applications.
ORDERING INFORMATION
PART NO.
065-7418POETB
DESCRIPTION
16-port 10/100 PoE / PoE+ Hardened
Unmanaged Switch + 2 Gigabit Dual
Media Ports
Required 48 VDC Power Supply sold separately; please
see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
Notes:
• Optional Hardened SFP Gigabit Ethernet Modules sold separately.
• Required 48 VDC Power Supply sold separately; please see www.signamax.com for 75, 120, 240, or 480 watt
models to support connected loads.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
TM
NETWORK CONNECTIVITY SYSTEMS
PoE Media Converters
PoE Ethernet Switches
PoE Media Converters
Signamax Small Form-factor Pluggable (SFP)
hardened temperature range (-40° C to 85°
C) fiber modules come in an array of
options supporting Gigabit
Ethernet transmission over
either multimode or singlemode
fiber cable at distances up to 110
kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and the
SFP Multi-Source Agreement (MSA),
and are cost-effective methods of providing changeable Gigabit Ethernet
fiber optic interfaces to hardened industrial switches and media converters
equipped with a standard SFP slot.
PoE Ethernet Switches
26-Port 10/100/1000 Stackable Managed
PoE / PoE+ Switches with Four
100/1000Base SFP Dual Media Ports
plus Two 100/1000Base SFP Slots
Signamax Connectivity Systems’ 065-7861POE and 065-7861POEFP switches are the new flagships of the Signamax Ethernet Power
over Ethernet (PoE) switch product line. They provide non-blocking
performance for 24 10/100/1000 Gigabit Ethernet connections
supporting either PoE or the new PoE+ 802.3at standard, 4 of which
are Dual Media 100/1000Base SFP Ports, plus 2 100/1000Base
SFP-only ports, for a total of 26 ports. These new switches support
modern capabilities including IPv6, SSH management, QoS and
Tagged VLAN, and full SNMP management at a surprisingly low
cost. The six 100 or 1000Base SFP slots (four are Dual Media ports)
use auto-detected SFP modules for fiber optic switch interconnection
at extended distances. Both ring and star Gigabit backbone network
architectures are possible with full automatic failover. The included
SNMP management package is complete and comprehensive, with
web browser, local console, and Telnet remote terminal connections
and real time updating. The 065-7861 also communicates with
network management systems such as HP OpenView™ via SNMP
for enterprise-wide status display, statistical monitoring, and switch
control. Enhanced Layer 2+ look-ahead routing features and IEEE
802.1p Quality of Service / 802.1Q Tagged VLAN / IP Type of
Service support make the Signamax 065-7861POE or the 0657861POE-FP models excellent choices for establishing or adding to
an Enterprise PoE / PoE+ network.
ORDERING INFORMATION
PART NO.
065-7861POE
ORDERING INFORMATION
Hardened 1000Base SFP Fiber
Modules (-40° C to 85° C)
KEY FEATURES
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
Supports both IEEE 802.3af PoE and IEEE 802.3at
PoE+ devices.
Dual speed SFP slots for Fast Ethernet or Gigabit Ethernet
fiber uplink.
802.3az Energy Efficient Ethernet standard.
IPv6 and s-Flow support.
Easy-Port-Configuration, for ease of setup in the IP Phone,
IP Camera or Wireless environments.
IEEE 802.1AB LLDP (Link Layer Discovery Protocol) and
LLDP-MED (Media Endpoint Discovery) support.
Supports RSTP/MSTP/STP for Ethernet redundancy.
IP Multicast Filtering through IGMP Snooping V1, V2 & V3.
Supports port-based VLAN and IEEE 802.1Q VLAN Tagging
and GVRP.
IEEE 802.1p QoS with four priority queues.
IEEE 802.3 ad Link Aggregation Control Protocol (LACP)
support.
RS-232 console, Telnet, SNMP V1, V2c & V3, RMON,
SSL/SSH, HTTP (Web Browser), and TFTP Management.
1000Base SFP Fiber Modules (0° C to 70° C)
Signamax Small Form-factor Pluggable (SFP) commercial
temperature range (0° C to 70° C) fiber modules come in
an array of options supporting Gigabit Ethernet
transmission over either multimode or
singlemode fiber cable at distances up to
110 kilometers. They adhere to the
IEEE 802.3z standards for Gigabit
Ethernet fiber connectivity and
the SFP Multi-Source
Agreement (MSA), and are costeffective methods of providing
changeable Gigabit Ethernet fiber
optic interfaces to commercial-grade
switches and media converters
equipped with a standard SFP slot.
Bandwidth Rate Control, via port-policer.
Static Secure MAC addresses supported.
Supports Network Time Protocol (NTP).
1000 Mbps: Full-duplex; 10/100 Mbps: Full/Half-duplex;
Auto-Negotiation, Auto-MDI/MDIX.
Note: Optional SFP Gigabit Ethernet and Fast Ethernet Modules Sold Separately.
Please go to www.signamax.com for details.
800 446-2377 or visit our Web Site at www.signamax.com. for detailed product information and specifications.
065-79SXEDMG-H
065-79LXMG-H
065-79LXEDMG-H
065-79XDMG-H
065-79ZXMG-H
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
065-79SXMG
065-79SXEDMG
065-79LXMG
065-79LXEDMG
065-79XDMG
065-79ZXMG
ETHERNET WORK FOR YOU
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
MAKING POWER OVER
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
DESCRIPTION
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
1000BaseSX SFP Module 1310 nm MM/LC, 2 km
1000BaseLX SFP Module 1310 nm SM/LC, 10 km
1000BaseLX SFP Module 1310 nm SM/LC, 40 km
P o E
NE T W OR K
1000BaseZX SFP Module 1550 nm SM/LC, 80 km
1000BaseEZX SFP Module 1550 nm SM/LC, 110 km
ORDERING INFORMATION
PART NO.
DC-1848-75W
DC-1848-120W
DC-1848-240W
T
DC-1848-480W
TM
DESCRIPTION
75 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.) or 120 to 370 V DC, 48 V DC output.
120 Watt extended temperature DIN-rail mount power supply, input 88 to 132 / 176
to 264 V AC (47 to 63 Hz.), switch-selectable, or 120 to 370 V DC, 48 V DC output.
240 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
480 Watt extended temperature DIN-rail mount power supply, input 88 to 264 V AC
(47 to 63 Hz.), or 124 to 370 V DC, 48 V DC output.
999 N.W. 159th Drive, Miami, FL 33169. • 800 446-2377 • www.signamax.com
www.signamax.com
Media
C ONNE C T I V I T Y
PoE
1000BaseXD SFP Module 1550 nm SM/LC, 40 km
The Signamax Connectivity Systems' DC-1848 series Hardened Industrial DIN-rail
Mount Power Supplies are intended to provide clean, reliable 48 volt DC power to
Power over Ethernet (PoE) harsh environment equipment under severe conditions.
These power supplies are the solution for transportation surveillance camera systems,
outdoor PoE-capable wireless access points, and other harsh environments where
temperature extremes exist and PoE is a requirement. The included DIN-rail mount
makes installation easy. Input power can be either AC or DC, over a wide voltage
range. Perfect for powering Signamax harsh environment PoE switches or other
devices requiring 48 volt DC power.
Port mirroring, both Inbound and Outbound.
065-7861POE-FP 26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 370 watts PoE power.
1000BaseSX SFP Module - MM/LC,
220m Span on 62.5µm Fiber / 550m
Span on 50µm Fiber
TM
48 Volt DC Industrial DIN-Rail Mount Power Supplies
Per-port programmable MAC address locking.
26-Port 10/100/1000 Stackable PoE/PoE+ Managed Switch with 4 SFP
Dual Media Ports + 2 100/1000Base SFP Ports; 185 watts PoE power.
065-79SXMG-H
Hardened Temperature Range (-40° C to 85° C) Models:
065-79EZXMG
Supports Command Line Interface in RS-232 Console.
DESCRIPTION
DESCRIPTION
065-79EZXMG-H
Supports IEEE 802.1x Security.
Full wire-speed forwarding rate.
PART NO.
Powering devices remotely using Power over Ethernet (PoE) offers
tremendous benefits. How do you get PoE working for you?
By leveraging the new Signamax switches and media converters
uniquely suited for PoE applications.
S Y S T E M S
CONVERTERS
Ethernet
PoE
With Power over Ethernet, Signamax continues its 30-year tradition of
providing high-performance, high reliability products that meet the
most demanding needs of customers across major industries. Our new
commercial and industrial grade switches and media converters deliver
high value and high ROI for PoE applications — with models and
configurations to suit any application or technical requirement.
Keeping
Yo u r
World
Connected.
PoE greatly simplifies the task and drives down the cost of powering
devices remotely, especially for VoIP applications. And the Signamax
PoE line delivers all of the advantages of this powerful technology.
䡲 Cost savings: Just one cable is required — no need to install conduit,
electrical wiring or outlets.
䡲 Flexibility: Locate your PoE appliance or device anywhere, even where
no AC outlets exist.
䡲 Reliability: Fewer wires mean less risk of power disruption. And with a
UPS in place, power to your devices is assured even if a failure occurs.
䡲 Network Control: Easily monitor and control your devices in a managed
environment using SNMP.
With pre-sale design, post-design support and a generous warranty,
Signamax can help maximize the ROI of your PoE project and assure high
uptime and value. Contact Signamax or an authorized distributor to learn
more about our PoE line or our full range of solutions.
IPCam
IPCam
Internet
065-7726SPOE-FP
PoE-AP
SWITCHES
Data
PoE-AP
Power