Whirlpool 9761862 Specifications

ELECTRIC RANGE
For questions about features, operation/performance,
parts, accessories or service, call: 1-800-253-1301
or visit our website at...
www.whirlpool.com
Table of Contents .................................................
To the installer: Please leave this
instruction book with the unit.
To the consumer: Please read and
keep this book for future reference.
9761862
2
TABLEOF COb, H NTS
RANGE SAFETY .............................................................................
The Anti-Tip Bracket ....................................................................
PARTS AND FEATURES ................................................................
COOKTOP USE ..............................................................................
3
3
5
7
Cooktop Controls .........................................................................
ACCUSIM M ER®Feature ..............................................................
7
7
Dual Cooking Zone ......................................................................
Warm Zone Element ....................................................................
Ceramic Glass ..............................................................................
Coil Elements and Burner Bowls .................................................
8
8
8
9
Lift-up Cooktop ..........................................................................
Home Canning ...........................................................................
Cookware ...................................................................................
10
10
10
ELECTRONIC OVEN CONTROLS ...............................................
Display ........................................................................................
Start ............................................................................................
Off/Cancel ..................................................................................
Clock ..........................................................................................
Tones ..........................................................................................
Fahrenheit and Celsius ...............................................................
Timer ...........................................................................................
Control Lock ...............................................................................
12-Hour Shut-Off .......................................................................
Oven Temperature Control ........................................................
OVEN USE .....................................................................................
Aluminum Foil .............................................................................
Positioning Racks and Bakeware ..............................................
Split Oven Rack ..........................................................................
Bakeware ....................................................................................
Meat Thermometer .....................................................................
Oven Vent ...................................................................................
Baking and Roasting ..................................................................
Choice Bake ®Function ..............................................................
Broiling ........................................................................................
Convection Cooking ...................................................................
Convection Baking and Roasting ..............................................
Warm Hold Feature ....................................................................
Timed Cooking ...........................................................................
Sequence Programming ............................................................
Warming Drawer ........................................................................
RANGE CARE ...............................................................................
Self-Cleaning Cycle ....................................................................
General Cleaning ........................................................................
Oven Light ..................................................................................
Oven Door ..................................................................................
Storage Drawer ..........................................................................
Warming Drawer ........................................................................
TROUBLESHOOTING ..................................................................
ASSISTANCE OR SERVICE .........................................................
11
11
11
12
12
12
12
12
13
13
13
13
13
14
14
15
15
15
15
16
16
17
17
18
19
20
21
21
21
23
24
25
25
26
26
27
WARRANTY ..................................................................................
28
RANGESAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without
having the anti-tip bracket fastened down properly.
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
See the installation instructions for details.
Failure to follow these instructions
Anti-Tip Bracket
can result in death or serious burns to children and adults.
Making sure the anti-tip bracket is installed:
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor.
• Slide range back so rear range foot is under anti-tip bracket.
Range Foot
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances
known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of
potential exposure to such substances.
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other
reproductive harm.
This appliance can cause low-level exposure to some of the substances
monoxide, and toluene.
listed, including benzene, formaldehyde,
carbon
iMPORTANT
SAFETY iNSTRUCTiONS
WARNING:
To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
[] WARNING:
TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE
BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP
BRACKET.
[] CAUTION:
Do not store items of interest to children in
cabinets above a range or on the backguard of a range children climbing on the range to reach items could be
seriously injured.
[] Proper Installation - Be sure the range is properly installed
and grounded by a qualified technician.
[] Never Use the Range for Warming or Heating the Room.
[] Do Not Leave Children Alone - Children should not be left
alone or unattended in area where the range is in use.
They should never be allowed to sit or stand on any part of
the range.
[] Wear Proper Apparel - Loose-fitting or hanging garments
should never be worn while using the range.
[] User Servicing - Do not repair or replace any part of the
range unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
[] Storage in or on the Range - Flammable materials should
not be stored in an oven or near surface units.
[] Do Not Use Water on Grease Fires - Smother fire or flame
or use dry chemical or foam-type extinguisher.
[] Use Only Dry Potholders - Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
[] Protective Liners - Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
[] Glazed Cooking Utensils - Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
[] Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units - To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
[] Do Not Soak Removable Heating Elements - Heating
elements should never be immersed in water.
[] Do Not Cook on Broken Cooktop - If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
[] Clean Cooktop With Caution - If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
[] Use Care When Opening Door - Let hot air or steam
escape before removing or replacing food.
[] Do Not Heat Unopened Food Containers - Build-up of
pressure may cause container to burst and result in injury.
[] Keep Oven Vent Ducts Unobstructed.
[] Placement of Oven Racks - Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
[] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN - Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns - among
these surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
[] Use Proper Pan Size - The range is equipped with one or
more surface units of different size. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a
portion of the heating element to direct contact and may
result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
For self-cleaning
[] Never Leave Surface Units Unattended at High Heat
Settings - Boilover causes smoking and greasy spillovers
that may ignite.
[] Clean Only Parts Listed in Manual.
[] Make Sure Reflector Pans or Drip Bowls Are in Place Absence of these pans or bowls during cooking may
subject wiring or components underneath to damage.
ranges -
[] Do Not Clean Door Gasket - The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket.
[] Do Not Use Oven Cleaners - No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
[] Before Self-Cleaning the Oven - Remove broiler pan and
other utensils.
For units with ventilating
hood -
[] Clean Ventilating Hoods Frequently - Grease should not
be allowed to accumulate on hood or filter.
[] When flaming foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
PARTSAND FEATURES
This manual covers several different models. The range you have purchased
may have some
location and appearance
of the features shown here may not match those of your model.
or all of the parts
and features
listed.
Control Panels
C
ooo
oo
ooo
F
D
A. Surface cooking area locater
B. Electronic oven control
D. Left front control knob
E. Left rear control knob
C. Surface cooking area locater
G
H
E Warm zone push button (some models)
G. Right rear control knob
H. Right front control knob
ACCUSA_E
D
E
A. Surface cooking area locater
B. Electronic oven control
C. Surface cooking area locater
F
D. Left front control knob
E. Left rear control knob
F. Right rear control knob
G. Right front control knob
The
A
B
D
E
F
G
m
H
m
A_CUSJM_ER
SIMMER
TEMPrrlt_E
3"
•
NOHMAL
_URNE_
PUSHma TURN
0O
A. ACCUSIMMER _ control switch
B. Left front control knob
C. Left rear control knob
D. Electronic
oven control
G. Hot surface indicator light
H. Right front control knob
E. Surface cooking area Iocator
F Right rear control knob
Range
G
H
I
J
K
B
C
E
\
A. Oven vent (on ceramic
glass models)
B. Ceramic glass (on some
models)
C. Dual element
(on some models)
D. Anti-tip bracket
E. Model and serial number plate
(behind left side of storage
drawer)
E Storage drawer (on some
models) or warming drawer
(on some models)
G. Console night light (on some
models)
H. Oven light switch
(on some models)
I. Console panel
J. Warm zone element (on some
models)
K. Warm zone indicator light (on
some models)
L. Hot surface indicator light
(on ceramic glass models)
M. Automatic oven light switch
N. Broil element (not shown)
O. Gasket
P. Bake element (hidden
on some models)
Q. Self-clean latch
Parts and Features not shown
Coil elements (on some models)
Oven door window
Oven light
Broiler pan and grid (on some
models)
Roasting rack (on some models)
Storage drawer liner (on some
models)
COOKTOPUSE
The ACCUSIMMER ®feature setting is an adjustable heat setting
for more precise simmering. It is the left front surface cooking
area or element. The indicator light will glow when the
ACCUSIMMER ® feature is in use.
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
oo
The control knobs can be set anywhere between HI and LO. Push
in and turn to setting. Use the following chart as a guide when
setting heat levels.
NOTE: Picture may vary depending on your modeL
SETTING
RECOMMENDED
HI
•
Start food cooking.
The ACCUSIMMER ® control switch has 2 settings: SIMMER and
NORMAL BURNER. When the control is set on NORMAL
BURNER, the left front surface cooking area or element will
function as a single or dual element (on some models).
To use:
•
Bring liquid to a boil.
1.
Push the ACCUSIMMER ®control switch to the SIMMER
position. The indicator light will glow.
Medium High
Between
MEDIUM & HI
or 6-8
•
Hold a rapid boil.
2.
•
Quickly brown or sear food.
Push in and turn the left front control knob to a setting
anywhere between HI and LO.
MEDIUM
or
Between
4-6
•
Maintain a slow boil.
•
Fry or saute foods.
•
Cook soups, sauces and gravies.
Medium Low
Between
MEDIUM & LO
or 2-4
•
Stew or steam food.
•
Simmer.
LO
•
Keep food warm.
•
Melt chocolate or butter.
•
Keep cooked foods warm.
Warm Zone
Element
(on some ceramic
glass models)
I
USE
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
Select a knob position near medium or medium low (4 or 5)
for a low simmer or when using lids. Select a knob position
near medium-high (7 or 8) for a high simmer or when not
using lids.
On some models, select either the Single or Dual Zone
settings. See "Dual Watt Element" section.
3.
Push the ACCUSIMMER ®control switch back to the
NORMAL BURNER setting when finished cooking. The
indicator light will go out.
"
1
\\\\\
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
1
Doing so can result in food poisoning or sickness.
A. Single size (6" [!5.24 cm])
B. Dual size (9" [22.86 cm])
The Dual Cooking Zone offers flexibility depending on the size of
the cookware. Single size can be used in the same way as a
regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware.
000
o 0
IUAL
SIN6LF
Use the Warm Zone element to keep cooked foods warm. One
hour is the recommended maximum time to maintain food
quality.
Do not use it to heat cold foods.
The Warm Zone element can be used alone or when any of the
other surface cooking areas are being used.
The Warm Zone element area will not glow red when cycling on.
However, its indicator light will glow as long as the Warm Zone
element area is too hot to touch.
HI
•
Use only cookware and dishes recommended
cooktop use.
•
Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture
to escape.
•
Do not use plastic wrap to cover food. Plastic wrap may melt.
•
Use pot holders or oven mitts to remove food.
tl
A. Dual
B. Single
To Use DUAL:
1. Push in and turn the left front control knob counterclockwise
to the DUAL zone anywhere between HI and LO.
2.
2.
000
0 0
Push in and turn knob to vertical (off) when finished.
To Use SINGLE:
1. Push in and turn the left front control knob clockwise to the
SINGLE zone anywhere between HI and LO.
for oven and
ZONE O
WARM
To Use:
Push in WARM ZONE button to activate. Push again to turn off.
Push in and turn knob to vertical (off) when finished.
The surface cooking area will glow red when an element is on. It
will cycle on and off, at all settings, to maintain the selected heat
level.
It is normal for the surface of white ceramic glass to appear to
change color when surface cooking areas are hot. As the glass
cools, it will return to its original color.
Wiping off the cooktop before and after each use will help keep it
free from stains and provide the most even heating. On cooktops
with white ceramic glass, soils and stains may be more visible,
and may require more cleaning and care. For more information,
see "General Cleaning" section.
•
Do not store jars or cans above the cooktop. Dropping a
heavy or hard object onto the cooktop could crack the
cooktop.
•
Do not leave a hot lid on the cooktop. As the cooktop cools,
air can become trapped between the lid and the cooktop,
and the ceramic glass could break when the lid is removed.
Forfoodscontaining
sugarinanyform,cleanupallspillsand
soilsassoonaspossible.
Allowthecooktop
tocooldown
slightly.
Then,whilewearing
ovenmitts,remove
thespills
whilethesurface
isstillwarm.Ifsugary
spillsareallowed
to
cooldown,theycanadhere
tothecooktop
andcancause
pittingandpermanent
marks.
Donotslidecookware
orbakeware
across
thecooktop.
Aluminum
orcopperbottoms
androughfinishes
on
cookware
orbakeware
couldleavescratches
ormarksonthe
cooktop.
Donotcookpopcorn
inprepackaged
aluminum
containers
onthecooktop.
Theycouldleavealuminum
marksthat
cannot
beremoved
completely.
Donotallowobjects
thatcouldmelt,suchasplastic
or
aluminum
foil,totouchanypartoftheentirecooktop.
Donotusethecooktop
asacuttingboard.
Usecookware
aboutthesamesizeasthesurface
cooking
area.Cookware
should
notextend
morethan1"(2.5cm)
outside
thearea.
Coilelements
shouldbelevelforoptimal
cooking
results.
Burner
bowls,whenclean,
reflectheatbacktothecookware.
Theyalso
helpcatchspills.
Cookware
shouldnotextend
morethan1"(2.5cm)overthecoil
element.
Ifcookware
isuneven
ortoolarge,itcanproduce
excess
heatcausing
theburner
bowltochange
color.Formore
information,
seethe"General
Cleaning"
section.
NOTE:
Before
removing
orreplacing
coilelements
andburner
bowls,makesuretheyarecoolandthecontrol
knobsareinthe
Offposition.
To Remove:
1.
Push in the edge of coil element toward the receptacle. Then
lift it just enough to clear the burner bowl.
2.
Pull the coil element straight away from the receptacle.
3.
Lift out the burner bowl.
A. Surface cooking area
B. Cookware/canner
C. 1" (2.5 cm) Maximum overhang
Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor
cooking results.
Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler,
no space or light should be visible between it and the
cookware.
To Replace:
1. Line up openings in the burner bowl with the coil element
receptacle.
\
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.
•
Do not cook foods directly on the cooktop.
Hot Surface Indicator Light (under ceramic glass)
The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.
2.
Holding the coil element as level as possible, slowly push coil
element terminal into the receptacle.
3.
When the terminal is pushed into the receptacle as far as it
will go, push down the edge of the coil element opposite the
receptacle.
Thelift-upcooktop
provides
easyaccess
forcleaning
beneath.
Donotdropthecooktop.
Damage
couldoccurtothefinishand
thecooktop
frame.Formoreinformation,
seethe"General
Cleaning"
section.
To Lift:
Lift the cooktop by both front corners until the supports lock into
place.
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base they can leave permanent marks on the cooktop or
grates.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
To Replace:
1. Lift the cooktop from both sides while pressing the support
rods back to unlock them.
2.
Slowly lower the cooktop into place.
When canning for long periods, alternate the use of surface
cooking areas, elements or surface burners between batches.
This allows time for the most recently used areas to cool.
•
Center the canner on the grate or largest surface cooking
area or element. Canners should not extend more than
1" (2.5 cm) outside the cooking area.
•
Do not place canner on two surface cooking areas, elements
or surface burners at the same time.
•
On ceramic glass models, use only flat-bottomed
canners.
On coil element models, the installation of a Canning Unit Kit
is recommended. If a kit is not installed, the life of the coil
element will be shortened. See "Assistance or Service" for
ordering instructions.
For more information, contact your local U.S. Government
Agricultural Department Extension Office. Companies that
manufacture home canning products can also offer
assistance.
10
Use the following chart as a guide for cookware material
characteristics.
COOKWARE
CHARACTERISTICS
Aluminum
•
Heats quickly and evenly.
•
Suitable for all types of cooking.
•
Medium or heavy thickness is best for
most cooking tasks.
•
Heats slowly and evenly.
•
Good for browning and frying.
•
Maintains heat for slow cooking.
Ceramic or
•
Follow manufacturer's
Ceramic glass
•
Heats slowly, but unevenly.
•
Ideal results on low to medium heat
settings.
Copper
•
Heats very quickly and evenly.
Earthenware
•
Follow manufacturer's
•
Use on low heat settings.
Porcelain
enamel-onsteel or cast
iron
•
See stainless steel or cast iron.
Stainless
•
Heats quickly, but unevenly.
•
A core or base of aluminum or copper
on stainless steel provides even
heating.
Cast iron
steel
instructions.
instructions.
ELECTRONICOVENCONTROLS
Style 1 - Electronic
A
B
Oven Control
C
(on some models)
D
E
Style 3 - Electronic Oven Control
FG
H
(on some models)
A
B
CDE
ii
Broil
Delay
I
J
K
L
M
N
A. Auto clean
P
I. Night light
B. Control lock
C. Warming drawer
(on some models)
D. Oven display
E. Delay
E Clock
G. Start
H. Timer set/off
J. Oven light
K. Programming options
L. Convect
M. Oven settings
iV. Temperature
O. Hour/minute
tq Off/cancel
Style 2 - Electronic Oven Control
A
0
B
(on some models)
C
D
E
K
J
F
H
G
A. Oven display
B. Clock
G. Temperature/time
H. Cook time
C. Timer/cancel
D. Start/enter
E. Auto clean
F. Off/cancel
L Start time
J. Custom broil
K. Bake
Style I - Electronic
ii
@
Controls
Locked
/
F
il
@
Clean
Door
Locked
ii
Oven Control
When power is first supplied to the appliance, "12:00 PM" will
appear on the display. See "Clock" section to set time of day.
If "12:00 PM" appears at any other time, a power failure has
occurred. Press OFF/CANCEL and reset the clock if needed.
©©
When the oven is not in use, the display shows the time of day.
Styles 2 & 3 - Electronic
Oven Controls
When power is first supplied to the appliance, "PF" or a flashing
time will appear on the display. Press OFF/CANCEL to clear the
display.
GH
I
J
K
L
A. Auto clean
B. Control lock
C. Oven display
D. Clock
E. Timer set/off
F. Start
H. Night light
I. Oven settings
J. Timed cooking
(on some models)
K. Temperature
L. Hour/minute
G. Oven light
M. Off/cancel
M
If "PF" or a flashing time appears at any other time, a power
failure has occurred. Press OFF/CANCEL and reset the clock if
needed.
When the oven is not in use, the display shows the time of day.
When performing a timed cook function, the display will show
either hours and minutes, or minutes and seconds.
Style I - Electronic Oven Control
The Start pad begins any oven function. The display will show
SET TEMP OR TIME OR PUSH START.
Styles 2 & 3 - Electronic
Oven Controls
The Start pad begins any oven function. If the Start pad is not
pressed within 5 seconds after pressing a function pad, the
"START?" or "?" indicator light will appear on the display (on
some models).
If the Start pad is not pressed within 5 minutes after pressing a
function pad, the oven display will return to the time of day mode
and the programmed function will be canceled.
11
Style 2 - Electronic Oven Control
The OFF/CANCEL pad stops any function except the Clock,
Timer, Control Lock or Warm Drawer (on some models).
Reminder Tones: Reminder tones may be turned off. On some
models, press and hold TIMER SET for 5 seconds. "rEP OFF" or
"OFF" will appear in the display. Repeat to turn reminder tones
back on, and "rEP ON" or "ON" will appear in the display.
On some models, this is a 12-hour clock that shows a.m. and
p.m.
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
All Tones: All of the above tones are preset on. All except the
end-of-cycle tones can be turned off.
To Turn Off/On: Press and hold STOP TIME for 5 seconds. A
tone will sound, and "Snd OFF" will appear on the display. Press
and hold COOK TIME for 5 seconds to turn tones on, and "Snd
ON" will appear on the display.
2.
Tone Pitch: The pitch is preset at high, but can be changed to
lew.
To Set:
Depending on your model, press the HR or MIN or TIME/
TEMP "up" or "down" arrow pads to set the time of day,
including a.m. or p.m.
Press CLOCK.
3.
To Change: Press and hold DELAY START for 5 seconds. A tone
will sound, and "Snd LO" will appear on the display. Repeat to
change, and "Snd HI" will appear on display.
Style 3 - Electronic Oven Control
Tones are audible signals, indicating the following:
Basic Functions
One tone
•
Valid pad press
•
Oven is preheating (long tone)
•
Function has been entered
•
Reminder (on some models), repeating each minute after the
end-of-cycle tones
Three tones
•
Invalid pad press
Four tones
•
Refer to Basic Functions in the "Tones" section.
The temperature
Celsius.
is preset at Fahrenheit, but can be changed to
Style I - Electronic
Oven Control
To change: Press and hold AUTO CLEAN for 5 seconds, and
TEMPERATURE UNIT CELSIUS will appear in the display. Repeat
to change back to Fahrenheit.
To exit mode, press OFF/CANCEL.
End of cycle
Styles 2 & 3 - Electronic
Style I - Electronic Oven Control
Reminder Tones: Reminder tones may be turned off. On some
models, press and hold BAKE for 5 seconds. REMINDER TONES
OFF will appear on the display. Repeat to turn reminder tones
back on, and REMINDER TONES ON will appear on the display.
Oven Controls
To change: Press and hold BROIL for 5 seconds. Repeat to
change back to Fahrenheit.
To exit mode, press OFF/CANCEL.
All Tones: All of the above tones are preset on. All except the
end-of-cycle tones can be turned off.
To disable tones, press and hold CLOCK for 5 seconds. Repeat
to turn tones back on.
The Timer can be set in hours or minutes up to 12 hours and
59 minutes, and counts down the set time. The Timer does not
start or stop the oven.
To Turn Off/On: Press and hold CLOCK for 5 seconds. A tone
will sound when changing tones from OFF to ON. ALL SOUNDS
OFF will appear on the display. Repeat to turn tones on, and ALL
SOUNDS ON will appear on the display.
To Set:
1. Press TIMER SET/OFF or TIMER/CANCEL. The timer
indicator light will light up on some models. If no action is
taken after 5 minutes, the display will return to the time of
day.
Tone Pitch: The pitch is preset at high, but can be changed to
low.
2.
To Change: Press and hold BROIL for 5 seconds. A tone will
sound, and TONE PITCH LOW will appear on the display. Repeat
to change and TONE PITCH HIGH will appear on display.
Depending on your model, press the HR or MIN or TIME/
TEMP "up" or "down" arrow pads to set the length of time.
3.
End of Cycle Tones: Press and hold CONVECT for 5 seconds to
turn END OF CYCLE TONES off. Press and hold CONVECT for
5 seconds to turn END OF CYCLE TONES on.
Press START. When the set time ends, end-of-cycle tones will
sound, then, if enabled, reminder tones will sound every
minute on some models.
4.
Press TIMER SET/OFF or TIMER/CANCEL
the Timer and reminder tones.
Key Press Tone: Press and hold WARM (Cooking Options) for
5 seconds, and KEY PRESS TONES OFF will appear on the
display. Press and hold WARM for 5 seconds, and KEY PRESS
TONES ON will appear on the display.
12
NOTE: Do not press the OFF/CANCEL
will turn off.
anytime to cancel
pad because the oven
On some models, to display the time of day for 5 seconds when
the timer is counting down, press CLOCK.
To Adjust Oven Temperature Calibration:
The Control Lock shuts down the control panel pads to prevent
unintended use of the oven.
Style I - Electronic Oven Control
1.
Press and hold OVEN LIGHT for 5 seconds until the oven
display shows the current calibration, for example, "OF" will
appear on the display.
2.
Press the TEMP or TEMP/TIME "up" or "down" arrow pad(s)
to increase or to decrease the temperature in 10°F (5°C)
amounts. The adjustment can be set between 30°F (15°C)
and -30°F (-15°C).
Press START.
When the control is locked, only the CLOCK SET, OVEN LIGHT
(on some models) and TIMER pads will function.
To Lock/Unlock
Control: Before locking, make sure the oven
and Timer are off. Press and hold "Lock" key for 5 seconds. A
single tone will sound, and "Loc" will appear on the display.
Repeat to unlock. "Loc" will disappear from the display.
3.
Styles 2 & 3 - Electronic Oven Controls
Styles
1, 2 & 3 - Electronic
Oven Controls
The oven control is set to automatically shut off the oven
12 hours after the oven turns on. This will not interfere with any
timed or delayed cook function.
Style I - Electronic
Oven Control
1.
Press and hold BAKE for 5 seconds until the oven display
shows the current calibration, for example "0°F CAL" or "00."
2.
Press the TEMP or TEMP/TIME "up" or "down" arrow pad(s)
to increase or to decrease the temperature in 10°F (5°C)
amounts. The adjustment can be set between 30°F (15°C)
and -30°F (-15°C).
Press START.
3.
The 12 hour shutoff feature may be turned off on Style 1
electronic oven controls.
To Set: Press and hold DELAY for 5 seconds. 12 HR SHUT-OFF
ON will appear on the display. Press and hold DELAY again for
5 seconds to turn off.
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door may cause burner
cycling to give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. No sign means the oven will be warmer by the displayed
amount. Use the following chart as a guide.
ADJUSTMENT
(ADJUSTMENT
°F
°C)
COOKS FOOD
10°F (5°C)
...a little more
20°F (10°C)
...moderately
30°F (15°C)
...much more
-10°F (-5°C)
...a little less
-20°F (-10°C)
...moderately less
-30°F (-15°C)
...much less
OVENUSE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well
ventilated room.
IMPORTANT: Do not line the oven bottom with any type of foil,
liners or cookware because permanent damage will occur to the
oven bottom finish.
•
Do not cover entire rack with foil because air must be able to
move freely for best cooking results.
•
To catch spills, place foil on rack below dish. Make sure foil is
at least 1" (2.5 cm) larger than the dish and that it is turned up
at the edges.
more
13
BAKEWARE
IMPORTANT: Do not place food or bakeware directly on the oven
door or bottom. Permanent damage will occur to the porcelain
finish.
RACKS
NOTES:
•
Position racks before turning the oven on.
•
Do not position racks with bakeware on them.
•
Make sure racks are level.
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
NUMBER
OF PAN(S)
POSITION ON RACK
1
Center of rack.
2
Side by side or slightly staggered.
3 or 4
Opposite corners on each rack. Make sure that
no bakeware piece is directly over another.
To move a rack, pull it out to the stop position, raise the front
edge, then lift out. Use the following illustration and charts as a
guide.
Split-Rack
with Removable Insert
The split-rack with removable insert is a space maximizer. When
the two are attached, they make a full rack. The insert can also be
removed to provide room for large items such as a turkey and
casseroles.
2--- i
1,,,,iiii
Traditional
The insert can also be used on the counter for a cooling rack.
Cooking
FOOD
RACK POSITION
Frozen pies, large roasts, turkeys,
angel food cakes
1 or 2
Bundt cakes, most quick breads,
yeast breads, casseroles, meats
2
Cookies, biscuits, muffins, cakes,
nonfrozen pies
2 or 3
Convection
A. Split-rack
B. Removable insert
To Use Racks:
Cooking
OVEN SETTING
Convect or Convect Bake
Do not place more than 25 Ibs (11.3 kg) on the split-rack.
NUMBER OF
RACKS USED
1
1.
RACK
POSITION(S)
Place a full rack on position 1 or 2, and the split-rack
position 3 or 4.
2.
Place large items on the right side of the full rack.
1,2 or 3
3.
Place deeper, covered dishes on the left side of the full rack.
4.
Place shallow dishes on the split-rack.
5.
When finished cooking, slowly remove items.
Convect or Convect Bake
2
2 and 4
Convect or Convect Bake
3
1,3 and 5
A
I
.........
_
:
,
/
B
A. Rear rack section
B. Front rack section
14
on
The bakeware material affects cooking results. Follow
manufacturer's recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
A
BAKEWARE/
RESULTS
RECOMMENDATIONS
Light colored
aluminum
•
•
Light golden
crusts
•
Even browning
Dark aluminum and
other bakeware with
dark, dull and/or
nonstick finish
Use temperature and time
recommended in recipe.
A. Oven vent (ceramic
glass model)
•
May need to reduce baking
temperatures 25°F (15°C).
•
Use suggested baking time.
•
For pies, breads and casseroles,
use temperature recommended in
recipe.
•
Place rack in center of oven.
Insulated cookie
sheets or baking
pans
•
Little or no
bottom browning
•
Place in the bottom third of oven.
•
May need to increase baking time.
Stainless
•
•
•
•
Brown, crisp
crusts
steel
Light, golden
crusts
Uneven browning
Stoneware
•
•
Crisp crusts
Ovenproof
glassware, ceramic
glass or ceramic
•
May need to increase baking time.
Follow manufacturer's
instructions.
•
On coil element models, the element can be used when the oven
is in use as long as the cookware does not extend more than
1" (2.5 cm) over the element.
ACCUBAKE ® Temperature
(on some models)
•
Insert the thermometer into the center of the thickest portion
of the meat or inner thigh or breast of poultry. The tip of the
thermometer should not touch fat, bone or gristle.
•
After reading the thermometer once, push it into the meat
1/2"(1.25 cm) more and read again. If the temperature drops,
cook the meat or poultry longer.
•
Check all meat in 2 or 3 places.
Management
System
The ACCUBAKE ®system electronically regulates the oven heat
levels during preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements
cycle on and off in intervals. The bake element will glow red when
cycling on, the broil element will not. This feature is automatically
activated when the oven is in use.
Before baking and roasting, position racks according to the
"Positioning Racks and Bakeware" section. When roasting, it is
not necessary to wait for the oven preheat conditioning time to
end before putting food in unless recommended in the recipe.
To Bake or Roast:
1.
Press BAKE.
Press TEMP "up" or "down" arrow pads to set a temperature
other than 350°F (177°C) in 5 ° amounts. The bake range can
be set between 170°F and 500°F (77°C and 260°C).
2.
Press START.
The temperature can be changed after this step.
START does not need to be pressed again on styles 2 and 3
of Electronic Oven Controls.
3.
On models without a temperature probe, always rely on a meat
thermometer to determine doneness of meat and poultry. The
internal temperature, not appearance, is what counts. A meat
thermometer is not supplied with this appliance.
A. Oven vent (coil
element model)
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the vent
will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper or other items that could melt
or burn near the oven vent.
May need to reduce baking
temperatures 25°F (15°C).
Brown, crisp
crusts
\
Press OFF/CANCEL when finished.
Preheating
Style I - Electronic Oven Control
After START is pressed, the oven will enter a timed preheat
conditioning. "Lo" will appear on the display until the temperature
is above 170°F (77°C). Once 170°F (77°C) is reached, the display
temperature will increase in 2° increments as the actual
temperature of the oven increases. "PREHEATING" will appear in
the display in the lower text line. When the preheat conditioning
temperature is reached, a tone will sound, and the selected
temperature will appear on the display.
15
•
After broiling, remove the pan from the oven when removing
the food. Drippings will bake on the pan if left in the heated
oven, making cleaning more difficult.
Styles 2 & 3 - Electronic Oven Controls
After START is pressed, the oven will enter a timed preheat
conditioning. "PrE" and the time countdown will appear on the
display (on some models). When the preheat conditioning time
ends, a tone will sound and the selected temperature will appear
on the display.
Before broiling, position rack according to Broiling Chart. It is not
necessary to preheat the oven before putting food in unless
recommended in the recipe. Position food on grid in the broiler
pan, then place it in the center of the oven rack. Close the door to
the broil stop position to ensure proper broiling temperature.
Preheat temperatures are affected by varying factors such as
room temperature and peak energy usage times. It is normal for
the temperature showing on the display and the actual oven
temperature to differ.
Waiting an additional 10 minutes after the preheat conditioning
time ends to put food in the oven is suggested when baking
foods with leavening ingredients, such as yeast, baking powder,
baking soda and eggs.
To Broil:
1. Open door to broil stop position.
2. Press BROIL.
The CHOICE BAKP function eliminates the top heat during oven
cooking. It is ideal for baking pies, casseroles and breads, and for
roasting foods that require longer and slower cook times such as
poultry and roasts.
3.
Press START.
4.
Press OFF/CANCEL when finished.
Similar to the baking and roasting function, the bake elements or
burners cycle on and off at intervals during CHOICE BAKE ®.
However, the cycle duration for the broil element is much shorter
during CHOICE BAKE ®cycle, allowing less top browning of foods
and more customized control for your baking results.
To Use:
1. Press CHOICE BAKE ®function.
For best results, place food 3 II (7 cm) or more from the broil
element. Times are guidelines only and may need to be adjusted
for individual foods and tastes. Recommended rack positions are
numbered from the bottom (1) to the top (5). For diagram, see the
"Positioning Racks and Bakeware" section.
Press the TEMP "up" or "down" arrow pad to set a
temperature other that 350°F (175°C) in 5 ° increments.
The bake range can be set between 170°F and 500°F
(75°C and 260°C).
2.
Press START.
The temperature can be changed after this step. Start does
not need to be pressed again.
3.
Broiling uses direct radiant heat to cook food. Changing the
temperature when Custom Broiling allows more precise control
when cooking. The lower the temperature, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broiling temperatures.
If your model does not have a broiler pan, one may be ordered.
Ask for Part Number 4396923.
For best results, use a broiler pan and grid (provided on some
models). It is designed to drain juices and help prevent
spatter and smoke.
•
For proper draining, do not cover the broiler grid with foil. The
bottom of the pan may be lined with aluminum foil for easier
cleaning.
•
Trim excess fat to reduce spattering.
the edges to prevent curling.
Slit the remaining fat on
Pull out oven rack to the stop position before turning or
removing food. Use tongs to turn food to avoid the loss of
juices. Very thin cuts of fish, poultry or meat may not need to
be turned.
16
CHART
FOOD
RACK
POSITION
COOK
TIME
minutes
Side 1
Side 2
Steak
1" (2.5 cm) thick
medium rare
medium
well-done
4
4
4
14-15
15-16
18-19
7-8
8-9
9-10
Ground meat patties*
3/4"(2 cm) thick
well-done
4
13-14
7-8
Pork chops
1" (2.5 cm) thick
4
20-22
10-11
Ham slice, precooked
1/2"(1.25 cm) thick
4
8-10
4-5
Frankfurters
4
5-7
314
Lamb chops
1" (2.5 cm) thick
4
14-17
8-9
Chicken
bone-in pieces
boneless breasts
3
4
17-20
11-16
17-20
11-16
4
8110
415
4
16-18
8-9
Press OFF/CANCEL when finished cooking.
To use the CHOICE BAKE® function during a regular BAKE cycle
to acheive less top browning, press CHOICE BAKE®, set the
desired temperature and press START.
•
BROILING
Fish
Fillets 1/4-1/2
H
(0.611.25
cm) thick
Steaks 3/4-1"
(2-2.5 cm) thick
*Place up to 9 patties, equally spaced, on broiler grid.
To Select Convection
Settings
There are five convection presets for time and temperature. Each
can be activated by sequentially pressing the CONVECT key.
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air maintains a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
The temperatures and times can be changed for each of the
following settings. This helps you to match the convection oven
settings with package instructions or your favorite recipes.
CONVECTION SETTINGS
Most foods can be cooked at lower cooking temperatures
25°F to 50°F (14°C to 28°C) and cooking time can be shortened
by as much as 30 percent, especially for large turkeys and roasts.
•
It is important not to cover foods so that surface areas remain
exposed to the circulating air, allowing browning and crisping.
•
Keep heat loss to a minimum by opening the oven door only
when necessary.
•
Choose cookie sheets without sides and roasting pans with
lower sides to allow air to move freely around the food.
•
Test baked goods for doneness a few minutes before the
minimum cooking time with an alternative method such as
using a toothpick.
•
Use a meat thermometer to determine the doneness of meats
and poultry. Check the temperature of pork and poultry in 2 or
3 places.
}.
{
,_l}
Function
Temperature
Time
(default)
CONVECT
(default)
325°F
0 minutes
CONVECT
COOKIES
350°F
0 minutes
CONVECT
MEATS
325°F
0 minutes
CONVECT
CASSEROLES
325°F
1 hour
30 minutes
CONVECT
FROZEN
425°F
45 minutes
NOTE: Each temperature in this table is 25°F (14°C) lower than
for a non-convection oven. At the end of each set time, the oven
will turn off.
1.
The first setting in display will show convection at
325°F (163°C), and scrolling text at the bottom of the screen
will scroll in this order: "SET TEMP OR TIME" then "OR PUSH
START" then "PUSH AGAIN" then "FOR NEXT."
During convection baking or roasting, the bake and broil
elements cycle on and off in intervals to maintain the oven
temperature, while the fan constantly circulates the hot air.
If the oven door is opened during convection baking or roasting,
the broil element and fan will turn off immediately and the bake
element willturn off in 2 minutes. They will come back on once
the door is closed.
•
For optimal cooking results, do not use aluminum foil.
•
Reduce recipe temperature
need to be reduced also.
To Convection
25°F (14°C). The cook time may
Each time the CONVECT pad is pressed, the display will
move to the next preset (for Cookies, Meats, Casseroles or
Frozen). The following instructions are applicable for each
preset.
2,
Press the TEMP "up" or "down" arrow pads to enter a
temperature other than the preset convection temperature.
The convection bake range can be set between 170°F and
500°F (77°C and 260°C).
Bake or Roast:
Before convection baking or roasting, position the racks
according to the "Positioning Racks and Bakeware" section.
When using two racks, place them on rack positions 2 and 4.
3,
4.
When roasting with CONVECT, use the roasting rack on top of
the broiler pan and grid. It is not necessary to wait for the oven to
preheat before putting food in, unless recommended in the
recipe.
Press the Hour and/or Minute "up" or "down"
enter the stop time.
Press START.
arrow pads to
The preheat display will show "Lo" in the temperature
field until the temperature is above 170°F (77°C). Once
170°F (77°C) is reached, the display temperature will increase
as the actual temperature of the oven increases, and it will
display "PREHEATING" in the lower text line.
5.
L
Press CONVECT key.
Press OFF/CANCEL to exit function when finished cooking.
)
A. Roasting rack
B. Broiler grid
C. Broiler pan
17
CONVECTION
FOOD/
RACK
POSITION
ROASTING CHART
COOKTIME
(min. per
1 Ib [454 g])
OVEN TEMP.
INTERNAL
FOOD
TEMP.
FOOD/
RACK
POSITION
COOKTIME
(rain. per
1 Ib [454 g])
OVEN TEMP.
INTERNAL
FOOD
TEMP.
20-25
325°F (163°C)
180°F (82°C)
15-20
325°F (163°C)
180°F (82°C)
Chicken*, Rack Position 2
Beef, Rack Position 2
Rib Roast
rare
medium
well-done
20-25
25-30
30-35
Rib Roast
(boneless)
rare
medium
well-done
22-25
27-30
32-35
300°F (149°C)
140°F (60°C)
160°F (71 °C)
170°F (77°0)
300°F (149°C)
140°F (60°C)
160°F (71 °C)
170°F (77°0)
Whole
3-5 Ibs
(1.5-2.2 kg)
5-7 Ibs
(2.2-3.1 kg)
Turkey*, Rack Positions 1 or 2
Rump,
Sirloin Tip
Roast
rare
medium
well-done
20-25
25-30
30-35
300°F (149°C)
Meat Loaf
20-25
325°F (163°C)
13 Ibs and
under
(5.85 kg)
10-15
300°F (149°C)
180°F (82°C)
Over 13 Ibs
(5.85 kg)
10-12
300°F (149°C)
180°F (82°C)
140°F (60°0)
160°F (71 °0)
170°F (77°0)
Cornish Game Hens*, Rack Position 2 or 3
165°F (74°0)
1-1.5 Ibs
(0.5-0.7 kg)
50-60
325°F (163°C)
180°F (82°C)
Veal, Rack Position 2
*Do not stuff poultry when convection
roasting.
Loin, Rib,
Rump
Roast
medium
well-done
25-35
30-40
325°F (163°C)
160°F (71°C)
170°F (77°C)
Pork, Rack Position 2
Loin Roast
(boneless)
Shoulder
Roast
30-40
325°F (163°C)
35-40
325°F (163°C)
160°F-170°F
(71°C-77°C)
160°F-170°F
(71°C-77°C)
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Ham, Rack Position
2
Fresh
(uncooked)
25-35
300°F (149°C)
160°F (71°C)
Fully
Cooked
15-20
300°F (149°O)
160°F (71°O)
Lamb, Rack Position
Leg,
Shoulder
Roast
medium
well-done
2
IMPORTANT: Food must be at serving temperature before
placing it in the warmed oven. Food may be held up to 1 hour,
however breads and casseroles may become too dry if left in the
oven during Warm Hold,
Warm Hold Feature allows hot cooked foods to stay serving
temperature. It can also be used at the end of a timed cook.
Style I - Electronic
25-30
30-35
300°F (149°C)
160°F (71°C)
170°F (77°C)
1.
Press WARM,
2.
Temperature (optional).
Press the TEMP "up" or "down" arrow pad to raise or lower
the temperature in 5°F (3°C) amounts to set a temperature
other than 170°F (77°C). The warm range is 170°F-200°F
(75°C-93°C).
3.
Press START.
4.
Press OFF/CANCEL when finished.
Style 2 - Electronic
18
Oven Control
Oven Control
1.
Press WARM.
2.
3.
4.
Temperature set at 170°F for 60 minutes,
Press START.
Press OFF/CANCEL when finished.
Style 2 - Electronic Oven Control
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Timed Cooking allows the oven to be set to turn on at a certain
time of day, cook for a set length of time, and/or shut off
automatically. Delay start should not be used for food such as
breads and cakes because they may not bake properly.
Style I - Electronic
2.
1.
Press desired cook function (optional).
2.
Press the TEMP "up" or "down" arrow pads to enter a
temperature other than the one displayed.
Press STOP TIME.
3.
4.
Press the HR and MIN "up" or "down"
the desired time to end cooking.
5.
Press START. The display will count down the time.
6.
Press the desired cook function. The indicator light will light
up.
Set the temperature (optional).
Press the TEMP "up" or "down" arrow pad to enter a
temperature other than the one displayed.
4.
Press HOUR/MINUTE "up" or "down" arrow pad to enter the
length of time to cook.
2.
5.
Press START. The display will count down the time. When the
time ends, the oven will shut off automatically.
3.
6.
Press OFF/CANCEL or open the oven door to clear the
display.
2.
Set the temperature (optional).
3.
Press the TEMP "up" or "down" arrow pad to enter a
temperature other than the one displayed.
4.
Press the HOUR/MINUTE "up" or "down" arrow pad to enter
the length of time to cook.
5.
Press DELAY. SET START TIME will light up.
6.
Press the HOUR/MINUTE
the time of day to start.
Press START.
7.
4.
5.
Press the TEMP "up" or "down" arrow pads to enter a
temperature other than the one displayed.
Press COOK TIME.
Press the HR and MIN "up" or "down"
the length of time to cook.
Press STOP TIME.
arrow pads to enter
6.
If STOP TIME has been pressed, press the HR and MIN "up"
or "down" arrow pads to enter the desired time to end
cooking.
7.
Press START. "DELAY" will appear on the display.
When the start time is reached, the oven will automatically
turn on. When the stop time is reached (if programmed), the
oven will shut off automatically and "End" will appear on the
display. End-of-cycle tones will sound, then, if on, reminder
tones will sound every minute.
8.
Open and close the oven door to clear the display and/or
stop reminder tones.
"up" or "down" arrow pad to enter
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be
changed any time after pressing START by repeating steps
1-6. When the set cook time ends, the oven will shut off
automatically.
8.
Open and close the oven door to clear the display and/or
stop reminder tones.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. Press desired cook function.
3.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. Press desired cook function.
arrow pads to enter
When the time ends, the oven will shut off automatically and
"End" will appear on the display. End-of-cycle tones will
sound, then, if enabled, reminder tones will sound every
minute.
Oven Control
To Set a Timed Cook:
1.
To Set a Timed Cook:
Press OFF/CANCEL or open the oven door to clear the
display.
Style 3 - Electronic Oven Control
To Set a Timed Cook:
1.
Press BAKE. The bake indicator light will light up.
2.
Press the temperature (optional).
3.
Press the TEMP/TIME "up" or "down" arrow pads to enter a
temperature other than the one displayed.
4.
Press COOK TIME. The cook time oven indicator light will
light up.
5.
Press the TEMP/TIME "up" or "down" arrow pad to enter the
length of time to cook.
6.
Press START. The display will count down the time. When the
time ends, the oven will shut off automatically and "End" will
appear on the display.
7.
Press OFF/CANCEL or open the oven door to clear the
display.
19
2.
Set the temperature (optional).
3.
Press the TEMP/TIME "up" or "down" arrow pad to enter a
temperature other than the one displayed.
NOTE: If Start is pressed after only 1 sequence has been
programmed, a regular cooking mode will start. For example, if
you choose Bake as your first step, and Start is pressed, the
oven will begin a normal baking cycle. After Start has been
pressed, additional steps cannot be added to the sequencing. If
additional steps are desired, press OFF/CANCEL This will exit
the sequence program, and the oven display will return to just the
time of day.
4.
Press COOK TIME. The cook time oven indicator light will
light up.
To Program Steps 2, 3 and 4 of the Sequence:
1. Press ADD STEP.
5.
Press TEMP/TIME "up" or "down" arrow pad to enter the
length of time to cook.
6.
Press START TIME. The start time/delay oven indicator light
will light up.
7.
Press TEMP/TIME "up" or "down" arrow pad to enter the time
of day to start.
Press START.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. Press BAKE.
8.
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be
changed any time after pressing START by repeating steps
2-7. When the set cook time ends, the oven will shut off
automatically and "End" will appear on the display.
9.
Press OFF/CANCEL or open the oven door to clear the
display.
"SELECT COOK OPTION" will appear on the display.
2.
Press CHOICE BAKE ®or any other desired Cooking Options
key.
3.
Press the TEMP "up" or "down" arrow pad (if desired) to
select a temperature other than the one displayed.
4.
Press the HOUR and/or MIN "up" or "down" keys to set the
time of day for the first cooking function to begin. For
example, 1:35.
"PUSH START OR ADD STEP" will appear on the oven
display.
5.
Continue repeating steps I through 4 until the maximum
number of sequences have been set. You can program up to
4 cooking functions within the sequence.
6.
Press START to begin sequence.
If you choose to press Start, your program sequence will
being. Additional steps cannot be added to the sequence
once Start has been pressed.
Sequence Programming allows you to program at one time up to
4 cooking functions. Other oven functions, such as the Timer and
Warming Drawer, may be used when a sequenced Program is
running.
To Review/Modify
All steps of a sequenced program must be programmed with a
stop time. If a stop time is not entered for a step in the sequence
program, and the ADD STEP pad is pressed, 3 tones will sound
prompting you to enter a stop time.
1.
Sequence Programming takes precedence over any
nonsequenced cook function. For example, if an untimed Bake
function is in process and a sequence program is started, the
untimed Bake function will be canceled, and the program
sequence will start.
When using Sequence Programming,
the oven display.
Example
- Sequence
"STEP" and "REVIEW" will appear on the display. The
number of the displayed step will flash. A recalled step will
remain lit on the display for 5 minutes if no further action is
taken.
2=
STEPS 1 2 3 4 will show on
Programming
3=
The start time and stop time can be changed by pressing the
HR or MIN "up" or "down" arrow pads.
"PUSH START OR ADD STEP" will appear on the oven
display.
4.
2O
Changing the start time and stop time of a step will
automatically change the start times and stop times of all
subsequent programmed cook functions.
Press the TEMP "up" or "down" arrow pad (if desired) to
select a temperature other than the one displayed.
Press the HOUR and/or MIN "up" or "down" keys to set the
time of day for the first cooking function to begin. For
example, 1:00.
Press ADD STER
If fewer than four steps have been programmed, press
REVIEW STEPS repeatedly until the last programmed step is
displayed, then press ADD STEP if it is desired to program an
additional step.
While a step is recalled, a cook function pad can be used to
change the function, or the TEMP "up" or "down" arrow pad
can be used to change the set temperature.
Press BAKE or any other desired Cooking Options key.
"SET COOK TIME OR PUSH START" will appear on the oven
display.
Press REVIEW STEPS. Step 1 will appear in the display.
Subsequent presses of REVIEW STEPS will cause display of
programmed steps in order.
"SET TEMP OR TIME OR PUSH START" will appear on the
oven display.
2=
Sequence:
If program steps are partially or completely programmed, yet the
sequence has not been started, the programmed cook functions
can be reviewed.
To Program the First Step of the Sequence:
1.
Programmed
3.
After Review/Modification
of the programmed
complete, press START to begin sequence.
sequence is
To Modify Sequence Programming:
1. Press DELETE STER
RANGE CARE
The last step of the sequence will be canceled, and the step
prior to the canceled sequence will show on the display for
either review or modification.
If the programmed sequence has not been started, see "To
Program Steps 2, 3 and 4 of the Sequence" section to
program a step to replace the canceled cook function.
2.
Press START.
The first step will show on the display and the program
sequence will begin.
Changes can be made during a programmed cook function;
however, changes cannot be made after a programmed cook
function has been completed.
If at any time during an active sequenced program ADD STEP
is pressed, 3 tones will sound.
Burn Hazard
Do not touch the oven during the Self-Cleaning
cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
The Warming Drawer is ideal for keeping hot cooked foods at
serving temperature. It may also be used for warming breads and
pastries.
Different types of food may be placed in the warming drawer at
the same time. For best results, do not hold foods longer than
1 hour. For smaller quantities or heat-sensitive foods, such as
eggs, do not hold longer than 30 minutes.
Food must be at serving temperature before being placed in the
warming drawer. Breads, pastries, and fruit pies may be heated
from room temperature.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to
the fumes may result in death to certain birds. Always move birds
to another closed and well ventilated room.
Self-clean the oven before it becomes heavily soiled. Heavy soil
results in longer cleaning and more smoke.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see
"Oven Vent" or "Oven Vents" section.
Do not clean, rub, damage or move the oven door gasket. The
door gasket is essential for a good seal.
Prepare Oven:
• Remove the broiler pan, grid, cookware and bakeware and,
on some models, the temperature probe from the oven.
Remove food from plastic bags and place in oven-safe container.
Cover foods with a lid or aluminum foil.
•
Remove any foil from the oven because it may burn or melt,
damaging the oven.
Do not cover with plastic wrap.
•
Remove oven racks to keep them shiny and easy to slide.
See "General Cleaning" section for more information.
Empty serving dishes and oven proof dishes can be heated while
the warming drawer is preheating.
Before using the warming drawer, wash the tray that lines the
bottom of the drawer with soap and water. See "General
Cleaning" section.
To Use:
1.
2.
Place cooked food(s) in warming drawer.
Press DRAWER WARM.
WARM DRAWER will appear on the display.
3.
Hand clean inside door edge and the 11/2'' (3.8 cm) area
around the inside oven cavity frame, being certain not to
move or bend the gasket. This area does not get hot enough
during self-cleaning to remove soil. Do not let water, cleaner,
etc. enter slots on door frame. Use a damp cloth to clean this
area.
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
Press START.
WARM DRAWER will appear on the display.
4.
Press DRAWER OFF when finished.
The Warming Drawer operates at 170°F (80°C) only.
21
Prepare Cooktop and Storage Drawer:
•
Remove plastic items from the cooktop because they may
melt.
•
Style 2 & 3 - Electronic
Remove all items from the storage drawer.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures,
to a powdery ash.
Style I - Electronic
burning soil
Before self-cleaning, make sure the door is closed completely
it will not lock and the cycle will not begin.
1. Press AUTO CLEAN.
Press the TEMP/TIME "up" or "down" arrow pad to set a
clean time other than 3 hours 30 minutes. The clean time can
be set between 2 hours 30 minutes and 4 hours 30 minutes.
3.
Press START/ENTER.
The oven door will automatically lock. The DOOR LOCKED
oven indicator lights will light up. The door will not unlock
until the oven cools.
When the cycle is complete and the oven cools, the oven
display and the oven indicator lights will go off.
The clean cycle can be set at one of two levels Maxi Clean
(4 hours 30 minutes) or Quick Clean (2 hours 30 minutes).
4.
Suggested clean times are 2 hours 30 minutes for light soil or
4 hours 30 minutes for average to heavy soil.
The oven light will not work during the Self-Cleaning cycle.
The rear surface elements will not work during the Self-Cleaning
cycle.
Style 2 & 3 - Electronic Oven Control
The oven is preset for a 3 hour 30 minute clean cycle, but the
time can be changed. Suggested clean times are 2 hours
30 minutes for light soil and between 3 hours 30 minutes and
4 hours 30 minutes for average to heavy soil.
Style I - Electronic Oven Control
Before delay of starting Self-Clean, make sure the clock is set to
the correct time of day. See "Clock" section. Also, make sure the
door is closed completely or it will not lock and the cycle will not
begin.
1. Press AUTO CLEAN to set a clean time for 2 hours
30 minutes (Quick Clean). Press AUTO CLEAN again to set a
clean time for 4 hours 30 minutes (MAXl CLEAN).
2. Press DELAY.
3.
4.
Press HR and MIN "up" and "down" pads to enter the time of
day to stop.
Press START.
The start time is automatically calculated and displayed. The
door will automatically lock, and DOOR LOCKED or LOCKED
and DELAY and the stop time will also appear on the display
(on some models). The door will not unlock until the oven
cools. When the start time is reached, the oven will
automatically turn on.
Once the oven has completely cooled, remove ash with a damp
cloth. Do not wipe down any of the inside surfaces until the oven
has completely cooled down. Applying a cool, damp cloth to the
inner door glass before it has cooled completely could result in
the glass breaking.
The oven light will not work during the Self-Cleaning cycle
When the cycle is complete and the oven cools, DOOR
LOCKED or LOCKED will disappear from the display.
To Self-Clean:
5. Press OFF/CANCEL to clear the oven display.
Style I - Electronic Oven Control
Style 2 - Electronic Oven Control
or
To set the clean time on Maxi Clean press AUTO CLEAN
again to set the time at 4 hours 30 minutes.
Before delay starting Self-Clean, make sure the clock is set to the
correct time of day. See "Clock" section. Also, make sure the
door is closed completely or it will not lock and the cycle will not
begin.
1.
2.
Press AUTO CLEAN to set a clean time to HI (4 hours
30 minutes). Press AUTO CLEAN again to change the setting
to LO (2 hours 30 minutes).
Press STOP TIME.
3.
Press START.
Press START.
The oven door will automatically lock and DOOR LOCKED or
LOCKED, the start time and stop time will appear on the oven
display. On some models, the clean time will appear on the
oven display.
The start time is automatically calculated. The door will
automatically lock, and DOOR LOCKED or LOCKED and
DELAY and the stop time will also appear on the display (on
some models). The door will not unlock until the oven cools.
The door will not unlock until the oven cools.
When the cycle is complete and the oven cools, DOOR
LOCKED or LOCKED will disappear from the display.
3.
Press OFF/CANCEL to clear the oven display.
To Delay Start Self-Clean:
Once the oven has completely cooled, remove ash with a damp
cloth. Do not wipe down any of the inside surfaces until the oven
has completely cooled down. Applying a cool damp cloth to the
inner door glass before it has cooled completely could result in
the glass breaking.
2.
or
2.
Oven Control
Before self-cleaning, make sure the door is closed completely
it will not lock and the cycle will not begin.
1. Press AUTO CLEAN to set a clean time for Quick Clean
(2 hours 30 minutes).
Oven Control
When the start time is reached, the oven will automatically
turn on.
Press any pad or open the oven door to clear the oven
display.
When the cycle is complete and the oven cools, "End" will
appear on the oven display and DOOR LOCKED or LOCKED
will disappear from the display.
4.
22
Press OFF/CANCEL to clear the oven display.
Style3 - ElectronicOvenControl
CERAMIC
GLASS (on some models)
Delay Start Self-Clean is not available on Style 3 Oven Control.
Do not use steel wool, abrasive powder cleansers, chlorine
bleach, rust remover or ammonia because damage may occur.
To Stop Self-Clean any time:
If the clean function is terminated while the oven cavity
temperature is greater than 500°F (260°C), the oven door will
remain latched until the oven cavity temperature is below this
threshold.
Always wipe with a clean, wet cloth or sponge and dry thoroughly
to prevent streaking and staining.
Style I - Electronic Oven Control
Press OFF/CANCEL. If the oven temperature is too high, the door
will remain locked. It will not unlock until the oven cools. If the
oven temperature is too high after self-cleaning, then LOCKED
will appear on the display until the oven completely cools.
Cooktop Polishing Creme is recommended regularly to help
prevent scratches, pitting and abrasions and to condition the
cooktop, and can be ordered as an accessory. See "Assistance
or Service" to order.
A Cooktop Scraper is also recommended for stubborn soils, and
can be ordered as an accessory. See "Assistance or Service" to
order. The Cooktop Scraper uses razor blades. Store razor
blades out of the reach of children.
Light to moderate
•
Style 2 - Electronic
Oven Control
Press OFF/CANCEL. If the oven temperature is too high, "cln,"
TIMED, ON, "cool," and LOCKED will appear on the display (on
some models), and the door will remain locked. It will not unlock
until the oven cools.
Style 3 - Electronic Oven Control
Clean while the cooktop is still warm. You may want to wear
oven mitts while cleaning the cooktop.
Sugary spills (jellies, candy, syrup)
•
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
•
Rub product into soil with a damp paper towel or soft cloth.
Continue rubbing until white film disappears.
Burned-on soil
•
Scraper:
Cooktop
Polishing Creme:
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears. The marks will not totally
disappear, but after many cleanings they will become less
noticeable.
Tiny scratches
•
Cooktop
and abrasions
Polishing Creme:
Rub creme into surface with a damp paper towel or soft
cloth. Continue rubbing until white film disappears. Scratches
and abrasions do not affect cooking performance, and after
many cleanings they will become less noticeable.
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner & Polish (not included):
See "Assistance
COOKTOPCONTROLS
or Service" section to order.
Liquid detergent or all-purpose
cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
•
Polishing Creme and Cooktop
Metal marks from aluminum and copper
Do not use soap-filled scouring pads, abrasive cleaners, Cooktop
Polishing Creme, steel-wool pads, gritty washcloths or some
paper towels. Damage may occur.
•
Cooktop
Rub creme into soil with damp paper towel. Hold scraper as
flat as possible on surface and scrape. Repeat for stubborn
spots. Polish entire cooktop with creme and paper towel.
Gently clean around the model and serial number plate
because scrubbing may remove numbers.
•
Polishing Creme and clean damp paper towel:
Heavy soil, dark streaks, specks and discoloration
•
Cooktop Polishing Creme or nonabrasive cleanser:
•
STAINLESS STEEL (on some models)
Cooktop
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
•
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Cooktop Scraper:
Clean while the cooktop is still warm. You may want to wear
oven mitts while cleaning the cooktop.
Press OFF/CANCEL If the oven temperature is too high, the door
will remain locked. It will not unlock until the oven cools.
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
soil
Paper towels or clean damp sponge:
Vinegar for hard water spots
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
•
Soap and water or dishwasher:
Pull knobs straight away from control panel to remove.
23
CONTROL
PAN EL
OVEN RACKS
Do not use abrasive cleaners, steel-wool pads, gritty washcloths
or some paper towels. Damage may occur.
•
•
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
•
•
see "Coil Elements and Burner Bowls."
Damp cloth:
(on some models)
Solution of 1/2cup (125 mL) ammonia to 1 gal. (3,75 L) water:
Soak for 20 minutes, then scrub with stainless steel-wool
pad.
•
Oven cleaner: Follow product label instructions.
•
Mildly abrasive cleanser: Scrub with wet scouring pad.
PAN AND GRID (on some models)
cycle.
Mildly abrasive cleanser:
Scrub with wet scouring pad,
•
•
pad
Do not clean in the Self-Cleaning
•
BOWLS
Steel-wool
BROILER
Make sure control knobs are off and elements are cool.
BURNER
cycle:
(on some models)
Do not clean or immerse in water. Soil will burn off when hot.
For more information,
RACKS
See "Self-Cleaning Cycle" first. Remove racks or they will
discolor and become harder to slide. If this happens, a light
coating of vegetable oil applied to the rack guides will help
them slide.
Glass cleaner and soft cloth or sponge:
COIL ELEMENTS
Self-Cleaning
AND ROASTING
Solution of 1/2cup (125 mL) ammonia to 1 gal. (3,75 L) water:
Soak for 20 minutes, then scrub with scouring or steel-wool
pad.
•
Oven cleaner:
Follow product label instructions.
Porcelain enamel only, not chrome
•
Dishwasher
Porcelain enamel only, not chrome
•
Dishwasher
STORAGE
DRAWER
( on some models)
Make sure drawer is cool and empty before cleaning.
SURFACE
UNDER
COOKTOP
(on some models)
Do not remove the cooktop to avoid product damage.
For more information,
•
Steel-wool
see "Lift-up Cooktop"
section,
pad
For more information,
•
Drawer Liner (on some models)
Remove all stored items from drawer and lift out drawer liner.
•
OVEN DOOR
Clean with mild detergent.
EXTERIOR
WARMING
•
Glass cleaner and paper towels or nonabrasive plastic
scrubbing pad:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
•
Self-Cleaning cycle:
See "Self-Cleaning
24
see "Storage Drawer" section.
Mild detergent
DRAWER
and TRAY ( on some models)
Make sure drawer is cool and remove tray.
•
Mild detergent (for both)
The oven light is a standard 40-watt appliance bulb. It will come
on when the oven door is open. When the oven door is closed,
press LIGHT to turn it on or off. It will not work during the SelfCleaning cycle.
To replace:
1.
Unplug range or disconnect power.
2.
Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3.
Turn bulb counterclockwise
4.
Replace bulb and bulb cover by turning clockwise,
5.
Plug in range or reconnect power.
Cycle" first.
to remove from socket,
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then follow these instructions. The oven door is heavy.
Before Removing:
1. Use a putty knife or screwdriver
corner of the door stop clip.
To Replace:
1. Grasp the door on the sides with your fingers on the front of
the door and your thumbs on its inside surface.
2.
Hold oven door so that the top edge of each hinge hanger is
horizontal. Insert hinge hangers into the front frame hinge
slots.
3.
Tilt top of door toward range. Slide hinge hangers down onto
front frame support pins. Make sure the hinge hangers are
fully seated and engaged on the support pins.
and insert it at the bottom
A. Hinge hanger
B. Door frame hinge
C. Support pins
A. Door stop clip
2.
Pry door stop clip free and remove from front frame hinge
slot. Take care not to scratch finish.
3.
Repeat procedure for other door stop clip.
4=
Insert the door stop clip with its angular surface at the top of
the frame hinge slot, then push in the bottom of the clip until
its flanges are flush with the front frame.
5.
Open the door completely and remove the door removal pins.
Save door removal pins for future use.
Close the door.
To Remove:
1.
Open the oven door. Insert door removal pins, included with
your range, into both hinge hangers. Do not remove the pins
while the door is removed from the range.
6.
A. Removal pins
B. Hinge hanger
2.
Slowly close the door until it rests against the door removal
pins.
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
To Remove:
3.
Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
1.
Pull drawer straight out to the first stop.
4.
Pull door straight up, then toward you. Hinge hangers will
slide out of front frame hinge slot. Do not remove door
removal pins until the door is replaced on the range.
2.
Lift up the back of the drawer and pull out.
To Replace:
1.
2.
Fit the ends of the drawer rails into the guides in the cavity.
Slide the drawer closed.
25
Remove all items from inside the warming drawer, and allow the
unit to cool completely before attempting to remove the drawer.
3.
Press the tab down on the right side, and lift tab up on the left
side at the same time, then pull drawer out another inch.
4.
Holding the drawer by its sides, slowly pull it all the way out.
To Remove:
1.
Open drawer to its full open position.
2.
Locate the black triangle-shaped
drawer.
tabs on both sides of the
To Replace:
1. Align the drawer glides with the receiving guides.
A. Tab
2.
Push drawer in all the way.
3.
Gently open and close the drawer to ensure it is seated
properly on the slides.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Nothing will operate
Cooktop
cooking
results not what expected
•
Is the power supply cord unplugged?
Plug into a grounded 3-prong outlet.
•
Is the proper cookware being used?
See "Cookware" section.
•
Has a household fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit.
•
Is the control knob set to the proper heat level?
See "Cooktop Controls" section.
•
Is the appliance level?
Level the appliance. See the Installation Instructions.
Cooktop
will not operate
•
Is the control knob set correctly?
Push in knob before turning to a setting.
•
On ceramic glass models, is the "Cooktop
See "Cooktop Lockout" section.
Excessive
•
heat around cookware
Oven will not operate
•
Is the electronic oven control set correctly?
See "Electronic Oven Control" section.
•
Has a delay start been set?
See "Timed Cooking" section.
•
On some models, is the Control Lock set?
See "Control Lock" section.
Lockout" set?
on cooktop
Is the cookware the proper size?
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware should not extend
more than 1" (2.5 cm) outside the cooking area.
Not Surface
•
indicator
Oven temperature
•
Does the oven temperature calibration need adjustment?
See "Oven Temperature Control" section.
•
On some models, does the cooling fan run during BAKE,
BROIL or CLEAN?
It is normal for the fan to automatically run when the oven is
in use. These helps cool the electronic control.
light stays on
Does the Hot Surface indicator light stay on after control
knob(s) have been turned off?
See "Cooktop Controls" section.
Oven indicator
•
26
too high or too low
lights flash
Do the oven indicator lights flash?
See the "Oven Indicator Lights" section. If the indicator
light(s) keeps flashing, call for service. See "Assistance or
Service" section.
Displayshowsmessages
ASSISTANCEORSERVICE
Is the display showing "PF" or flashing a time?
There has been a power failure. Clear the display. See
"Display(s)" section. On some models, reset the clock, if
needed. See "Clock" section.
Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL, OFF or
CANCEL/OFF to clear the display. See "Display(s)" section. If
it reappears, call for service. See "Assistance or Service"
section.
Self-Cleaning
•
cycle will not operate
Is the oven door open?
Close the oven door all the way.
Has the function been entered?
See "Self-Cleaning Cycle" section.
•
On some models, has a delay start Self-Clean cycle been
set?
See "Self-Cleaning Cycle" section.
•
Has a delay start been set?
See "Timed Cooking" section.
•
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
use only FSP ° replacement parts. FSP®replacement parts will fit
right and work right because they are made with the same
precision used to build every new WHIRLPOOL ® appliance.
To locate FSP_ replacement parts in your area, call us or your
nearest Whirlpool designated service center.
•
Oven cooking
Before calling for assistance or service, please check
"Troubleshooting." It may save you the cost of a service call. If
you still need help, follow the instructions below.
Call the Whirlpool Customer eXperience Center
toll free: 1-800-253-1301.
results not what expected
Is the appliance level?
Level the appliance. See the Installation Instructions.
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
•
Installation information.
•
Use and maintenance
•
Accessory and repair parts sales.
•
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
procedures.
Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service technicians
are trained to fulfill the product warranty and provide afterwarranty service, anywhere in the United States.
•
Is the proper temperature set?
Double-check the recipe in a reliable cookbook.
•
Is the proper oven temperature calibration
See "Oven Temperature Control" section.
•
Was the oven preheated?
See the "Baking and Roasting" and "Broiling" sections.
•
Is the proper bakeware being used?
See "Bakeware" section.
•
Are the racks positioned properly?
See "Positioning Racks and Bakeware" section.
•
Is there proper air circulation around bakeware?
See "Positioning Racks and Bakeware" section.
•
Is the batter evenly distributed in the pan?
Check to make sure batter is level in the pan.
Please include a daytime phone number in your correspondence.
Accessories U.S.A.
•
Is the proper length of time being used?
Adjust cooking time.
•
Has the oven door been opened while cooking?
Oven peeking releases oven heat and can result in longer
cooking times.
To order accessories, call the Whirlpool Customer eXperience
Center toll free at 1-800-442-9991 and follow the menu prompts.
Or visit our website at www.whirlpool.com
and click on "Buy
Accessories Online."
•
Are baked items too brown on the bottom?
Move rack to higher position in the oven.
•
Are pie crust edges browning early?
Use aluminum foil to cover the edge of the crust and/or
reduce baking temperature.
set?
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to Whirlpool
Corporation with any questions or concerns at:
Whirlpool Brand Home Appliances
Customer experience Center
553 Benson Road
Benton Harbor, M149022-2692
Canning Unit Kit
(coil element models)
Order Part Number 242905
Cooktop
Polishing Creme
(ceramic glass models)
Order Part Number 4392916
Cooktop Scraper
(ceramic glass models)
Order Part Number 3183488
Stainless
Steel Cleaner
& Polish
(stainless steel models)
Order Part Number 4396095
27
Wtt[RI2OOL ®COOKTOP,BULT.IN OVENAND RANGEWARRANTY
ONE-YEAR
FULL WARRANTY
For one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or
furnished with the product, Whirlpool Corporation will pay for FSP ® replacement parts and repair labor costs to correct defects in
materials or workmanship. Service must be provided by a Whirlpool Corporation designated service company.
SECOND THROUGH
FIFTH YEAR LIMITED WARRANTY
ON CLEANTOP ® COOKTOP
On ceramic glass ranges and ceramic glass cooktops, in the second through fifth years from the date of purchase, when this appliance
is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for FSP ®
replacement parts for the CLEANTOP ® ceramic glass cooktop.
Whirlpool Corporation warrants that the ceramic glass cooktop will not discolor, the cooktop pattern will not wear off, the rubber seal
between the ceramic glass cooktop and porcelain edge will not crack, the ceramic glass cooktop will not crack due to thermal shock
and the surface unit elements will not burn out.
Whirlpool Corporation
will not pay for:
1.
Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace house fuses or
correct house wiring, or to replace owner-accessible light bulbs.
2.
Repairs when your appliance is used in other than normal, single-family
3.
Pickup and delivery. Your appliance is designed to be repaired in the home.
4.
Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God or use of products not
approved by Whirlpool Corporation.
5.
Repairs to CLEANTOP ® ceramic glass cooktop or other surfaces if they have not been cared for as recommended
Care Guide.
6.
Repairs to parts or systems resulting from unauthorized modifications
7.
Replacement
8.
Any labor costs during the limited warranty period.
household use.
in the Use and
made to the appliance.
parts or repair labor costs for units operated outside the United States.
WHIRLPOOL
CORPORATION
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not
apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
Outside the 50 United States, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if another
warranty applies.
If you need service, first see the "Troubleshooting" section of this book. After checking "Troubleshooting," additional help can be found
by checking the "Assistance or Service" section or by calling the Whirlpool Customer eXperience Center, 1-800-253-1301 (toll-free),
from anywhere in the U.S.A.
9/04
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your appliance to
better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label/plate, located on your appliance as shown in the
"Parts and Features" section.
Dealer name
Address
Phone number
Model number
Serial number
Purchase date
9761862
© 2005 Whirlpool Corporation.
All rights reserved.
® Registered Trademark/TM
Trademark
of Whirlpool,
U.S.A.
2/05
Printed in U.S.A.