Canon FaxPhone L120 Specifications

Basic Guide
What Can I Do with This Machine?
Before Using the Machine
Document Handling
Print Media
Sending Faxes
Receiving Faxes
Copying
Printing
Maintenance
Troubleshooting
Machine Settings
Appendix
Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place for future reference.
ENG
Manuals for the Machine
● Machine Set-Up
● Software Installation
Starter Guide
● Basic Features
● Machine Settings
● Specifications
Basic Guide
(This Document)
● Advanced Fax Features
● Status Monitor
● Reports and Lists
Advanced Guide
CD-ROM
Software Guide
CD-ROM
● Driver Set-Up
● Printing
CD-ROM
Indicates the manual is supplied in PDF format in the accompanying CD-ROM.
● To view the manuals in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe
Reader/Acrobat Reader/Acrobat is not installed on your system, please download it from the Adobe
Systems Incorporated website (http://www.adobe.com).
● Considerable effort has been made to make sure that the manuals for the machine are free of
inaccuracies and omissions. However, as we are constantly improving our products if you need an
exact specification, please contact Canon.
● The machine illustration on the cover may differ slightly from your machine.
i
What Can I Do with This
Machine?
What Can I Do with This Machine?
Fax Features
Specify a recipient with a single
button
One-Touch Speed Dialing
→ p. 4-7
Specify a recipient with a three-digit
code
Coded Speed Dialing
→ p. 4-15
Specify multiple recipients with a
single button
Group Dialing
→ p. 4-22
Look up registered recipients
Directory Dialing
→ Advanced Guide
Redial when the line is busy
Redialing
→ Advanced Guide
ii
AAAAA
BBBBB
CCCCC
Fax Features (continued)
Send a fax to multiple recipients
What Can I Do with This Machine?
Broadcasting
→ Advanced Guide
Send a fax at a specified time
Timer Sending
→ Advanced Guide
Send a fax in response to the
recipient’s request
Polling Sending
→ Advanced Guide
Receive faxes in memory without
printing out
Memory Reception
→ Advanced Guide
Reject faxes from unregistered
telephone numbers
Reception Restriction
→ Advanced Guide
iii
Fax Features (continued)
Send a fax to be relayed to other fax
machines
Relay Initiation
What Can I Do with This Machine?
→ Advanced Guide
iv
Copy Features
Select a scan mode depending on
the quality of image to be scanned
Image Quality
→ p. 6-3
ABC
ABC
ABC
ABC
What Can I Do with This Machine?
Adjust the density level of scanned
images
Density
→ p. 6-4
Enlarge or reduce copied images
Zoom Ratio
→ p. 6-5
A
A
v
Contents
Manuals for the Machine................................................................. i
What Can I Do with This Machine? .............................................. ii
Fax Features.................................................................................... ii
Copy Features................................................................................. v
What Can I Do with This Machine?
Contents ......................................................................................... vi
Preface............................................................................................ xi
Important Safety Instructions .......................................... xi
Handling and Maintenance ............................................. xi
Location ..........................................................................xii
Power Supply.................................................................xiii
Customer Support (U.S.A.)............................................xiii
Customer Support (Canada)..........................................xiv
How to Use This Guide................................................................. xv
Legal Notices ............................................................................... xvi
Copyright .......................................................................xvi
Disclaimer ......................................................................xvi
Trademarks...................................................................xvii
Users in the U.S.A...................................................................... xviii
Pre-Installation Requirements for Canon Facsimile
Equipment.................................................................... xviii
Connection of the Equipment ........................................xix
In Case of Equipment Malfunction.................................xix
Rights of the Telephone Company ................................xix
FCC Notice .................................................................... xx
Users in Canada.......................................................................... xxii
Pre-Installation Requirements for Canon Facsimile
Equipment.....................................................................xxii
Notice........................................................................... xxiii
Laser Safety ................................................................................ xxv
CDRH Regulations .......................................................xxv
vi
1 Before Using the Machine ...................................................... 1-1
Machine Components .................................................................1-1
Operation Panel ...........................................................................1-3
LCD (Standby Mode) ...................................................................1-5
Fax Mode......................................................................1-5
Copy Mode ...................................................................1-5
Handset.........................................................................................1-6
Toner Cartridge............................................................................1-7
Maintaining the Toner Cartridge ...................................1-7
2 Document Handling................................................................. 2-1
Document Requirements ............................................................2-1
Scanned Area...............................................................................2-2
Loading Documents ....................................................................2-3
3 Print Media ............................................................................... 3-1
Paper Requirements....................................................................3-1
Printable Area ..............................................................................3-2
Paper Guidelines .........................................................................3-3
Loading Paper..............................................................................3-4
Loading Envelopes .......................................................3-4
Setting Paper Type and Size.......................................................3-7
vii
What Can I Do with This Machine?
Maintaining the Handset ...............................................1-6
4 Sending Faxes ......................................................................... 4-1
Scan Settings ...............................................................................4-3
Contrast ........................................................................4-3
Image Quality................................................................4-4
Speed Dialing ...............................................................................4-6
What Can I Do with This Machine?
Registering Recipients for Speed Dialing .....................4-6
Registering One-Touch Speed Dialing .........................4-7
Editing One-Touch Speed Dialing ..............................4-11
Deleting One-Touch Speed Dialing ............................4-14
Registering Coded Speed Dialing...............................4-15
Editing Coded Speed Dialing......................................4-18
Deleting Coded Speed Dialing....................................4-21
Registering Group Dialing...........................................4-22
Editing Group Dialing..................................................4-24
Deleting Group Dialing................................................4-26
Using Speed Dialing ...................................................4-27
Using One-Touch Speed/Group Dialing .....................4-27
Using Coded Speed Dialing........................................4-28
Manual Sending ........................................................................4-29
Sending Faxes Manually ............................................4-29
Entering Pauses .........................................................4-30
5 Receiving Faxes ...................................................................... 5-1
6 Copying .................................................................................... 6-1
Scan Settings ...............................................................................6-3
Image Quality................................................................6-3
Density..........................................................................6-4
Zoom Ratio ...................................................................6-5
7 Printing ..................................................................................... 7-1
viii
8 Maintenance............................................................................. 8-1
Cleaning the Machine..................................................................8-1
Exterior .........................................................................8-1
Interior...........................................................................8-2
Scanning Area ..............................................................8-4
Replacing the Cartridge ..............................................................8-5
Redistributing Toner .....................................................8-5
Replacing the Cartridge ................................................8-7
The Clean Earth Campaign ..........................................8-9
U.S.A. PROGRAM......................................................8-10
CANADA PROGRAM-CANADA PROGRAMME ........8-13
Transporting the Machine.........................................................8-15
9 Troubleshooting ...................................................................... 9-1
Clearing Jams ..............................................................................9-1
Document Jams............................................................9-1
Paper Jams...................................................................9-3
Inside the Machine........................................................9-3
Paper Feeder................................................................9-5
LCD Messages .............................................................................9-6
Error Codes ................................................................................9-11
If a Power Failure Occurs..........................................................9-12
If You Cannot Solve a Problem ................................................9-13
10 Machine Settings ................................................................. 10-1
Machine Settings .......................................................................10-1
Printing the Machine Status List .................................10-1
Accessing the Setting Menu .......................................10-3
Setting Menu ..............................................................................10-5
ix
What Can I Do with This Machine?
Recycling Used Cartridges .........................................................8-9
11 Appendix .............................................................................. 11-1
Specifications ............................................................................11-1
General .......................................................................11-1
Facsimile.....................................................................11-2
Copier .........................................................................11-3
Telephone...................................................................11-3
Printer .........................................................................11-4
What Can I Do with This Machine?
Index ...........................................................................................11-5
x
Preface
Thank you for choosing a Canon product. Before using the machine, please read
the following instructions for your safety.
Important Safety Instructions
Handling and Maintenance
–
–
–
–
–
–
–
–
–
–
–
Follow all warnings and instructions marked on the machine.
Do not subject the machine to strong physical shocks or vibrations.
Always unplug the machine before moving or cleaning it.
To avoid paper jams, never unplug the power cord, open the cartridge cover, or add
or remove paper in the machine while printing.
When transporting the machine, be sure to remove the toner cartridge from the
machine.
Place the toner cartridge in its original protective bag or wrap it in a thick cloth to
prevent exposure to light.
Always hold the bottom when you lift the machine. Never lift it by any of its trays or
attachments.
Do not insert any objects into the slots or openings on the machine since they may
touch dangerous voltage points or short out parts. This could result in fire or electric
shock.
Do not allow small objects (such as pins, paper clips, or staples) to fall into the
machine. If something does fall into it, unplug the machine immediately and contact
Canon Customer Care Center.
To avoid spillage in or around the machine, do not eat or drink near it. If you spill
liquid or if any substance falls into it, unplug the power cord immediately and contact
Canon Customer Care Center.
Keep the machine clean. Dust accumulation can prevent the machine from operating
properly.
xi
What Can I Do with This Machine?
WARNING
Except as specifically described in this guide, do not attempt to service the machine yourself. Never
attempt to disassemble the machine: opening and removing its interior covers will expose you to
dangerous voltages and other risks. For all service, contact Canon Customer Care Center.
What Can I Do with This Machine?
– Unplug the machine from the wall outlet and contact Canon Customer Care Center
in any of the following cases:
– When the power cord or plug is damaged or frayed.
– If liquid has spilled into the machine.
– If the machine has been exposed to rain or water.
– If the machine does not operate normally when you have followed the instructions
in this guide. Adjust only those controls that are covered by the instructions in this
guide. Improper adjustment of other controls may result in damage and may
require extensive work by a qualified technician to restore the product to normal
operation.
– If the machine has been dropped or the cabinet has been damaged.
– If the machine exhibits a distinct change in performance, indicating a need for
servicing.
Location
– Place the machine on a flat, stable, vibration-free surface that is strong enough to
support its weight.
– Place the machine in a cool, dry, clean, well ventilated place.
– Make sure the area is free from dust.
– Make sure the location is not exposed to high temperature or humidity.
– Keep the machine away from direct sunlight as this can damage the machine or
affect print quality. If you have to place the machine near a window, install heavy
curtains or blinds.
– Do not use the machine near water. Make sure that no wet or humid objects come
into contact with the machine.
– Do not use or store the machine outdoors.
– Do not install the machine near devices that contain magnets or generate magnetic
fields, such as speakers.
– If possible, place the machine near an existing telephone line outlet for easy
connection of the telephone line cord, and to avoid the expense of installing a new
outlet.
– Place the machine near a standard 120 V AC (60 Hz) power outlet.
xii
Power Supply
– During electrical storms, disconnect the power cord from the power outlet.
(Please note that any documents stored in the machine’s memory will be deleted
when you unplug the machine.)
– Whenever you unplug the machine, wait at least five seconds before you plug it in
again.
– Do not plug the machine into an uninterruptible power supply (UPS).
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please
move away from this product and consult your doctor.
Customer Support (U.S.A.)
Your machine is designed with the latest technology to provide trouble-free operation. If
you encounter a problem with the machine’s operation, try to solve it by using the
information in Chapter 9. If you cannot solve the problem or if you think your machine
needs servicing, contact Canon Customer Care Center at 1-800-828-4040 between
the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to 8:00
P.M. on Saturday. 24 hour online support is also available at the website:
http://www.canontechsupport.com/.
xiii
What Can I Do with This Machine?
– To ensure reliable operation of the machine and to protect it from overheating (which
can cause it to operate abnormally and create a fire risk), do not block the exhaust
vent. Never block or cover any openings on the machine by placing it on a bed, sofa,
rug, or other similar surface. Do not place the machine in a cupboard or built-in
installation, or near a radiator or other heat source unless proper ventilation is
provided. Leave enough space around all sides of the machine.
– Do not stack boxes or furniture around the power outlet. Keep the area free so you
can reach the outlet quickly. If you notice anything unusual (smoke, strange odors,
noises) around the machine, unplug the power cord immediately. Contact Canon
Customer Care Center.
– Do not allow anything to rest on the power cord, and do not place the machine where
the cord will be walked on. Make sure the cord is not knotted or kinked.
What Can I Do with This Machine?
Customer Support (Canada)
Canon Canada Inc., offers a full range of customer technical support options*:
– For step-by-step troubleshooting, e-mail technical support, the latest driver or
document downloads, and answers to frequently asked questions visit
http://www.canon.ca/
– Automated step-by-step telephone support on most current products 24 hours, 7
days a week 1-800-652-2666
– Free live technical support 9 A.M. to 8 P.M. EST Monday through Friday (excluding
holidays) for products still under warranty 1-800-652-2666
– The location of the authorized service facility nearest you visit http://www.canon.ca/
or 1-800-652-2666
If the problem cannot be corrected by using one of the above technical support options,
repair options are available at the time of your call to the live technical support number
above or via the website at http://www.canon.ca/
* Support program specifics are subject to change without notice.
xiv
How to Use This Guide
The following symbols are used throughout the manuals for the machine and
indicate the warnings, cautions and notes you should keep in mind when using
the machine.
Indicates a warning that may lead to death or serious injury if not
observed.
CAUTION
Explains how to avoid actions that could injure you or damage your
machine.
NOTE
Explains operating restrictions and how to avoid minor difficulties.
In addition, this guide uses distinctive notations to identify buttons and information in
the LCD:
– The buttons you press appear in square brackets: [Stop/Reset].
– Information in the LCD appears in angle brackets: <SET DOCUMENT>.
The numbers that point to the buttons on the operation panel diagram correspond to
the order of steps to take in the procedure.
xv
What Can I Do with This Machine?
WARNING
Legal Notices
What Can I Do with This Machine?
Copyright
Copyright © 2005 by Canon Inc. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise, without the prior written permission
of Canon, Inc.
Disclaimer
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN,
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OF USE OR AGAINST INFRINGEMENT OF ANY PATENT. CANON INC. SHALL NOT
BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS
MATERIAL.
xvi
Trademarks
Canon and FAXPHONE are registered trademarks, and UHQ is a trademark of Canon
Inc.
All other product and brand names are registered trademarks, trademarks or service
marks of their respective owners.
As an ENERGY STAR® Partner, Canon has determined that this
product meets the ENERGY STAR® guidelines for energy efficiency.
What Can I Do with This Machine?
xvii
Users in the U.S.A.
Pre-Installation Requirements for Canon Facsimile
Equipment
What Can I Do with This Machine?
A. Location
Supply a suitable table, cabinet, or desk. See p. 11-1 for the machine’s weight and
dimensions.
B. Order Information
1. Only a single line, touch-tone or rotary telephone set is to be used.
2. Order an RJ11-C modular jack (USOC code), which should be installed by the
telephone company. If the RJ11-C jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company’s business representative.
The line should be a regular voice grade line or the equivalent.
Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-orIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE
OVERSEAS
NOTE
Canon recommends an individual line following industry standards, e.g. the 2500 (Touch Tone) or
500 (Rotary/Pulse Dial) telephones. A dedicated extension off a PBX machine without “Call Waiting”
can be used with the machine. Key telephone systems are not recommended because they send
non-standard signals to individual telephones for ringing and special codes, which may cause a fax
error.
C. Power Requirements
This equipment should be connected to a standard 120-volt AC, three-wire grounded
outlet only. Do not connect this machine to an outlet or power line shared with other
appliances that cause “electrical noise.” Air conditioners, electric typewriters, copiers, and
machines of this sort generate electrical noise which often interferes with communications
equipment and the sending and receiving of documents.
xviii
Connection of the Equipment
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described
in this guide, disconnect the equipment from the telephone line and unplug the power
cord. The telephone line should not be reconnected or the power cord plugged in until
the problem is completely resolved. Users should contact Canon Authorized Service
Facilities for servicing of equipment. Information regarding Authorized Service Facility
locations can be obtained by calling Canon Customer Care Center.
(1-800-828-4040)
Rights of the Telephone Company
Should the equipment cause harm to the telephone network, the telephone company
may temporarily disconnect service. The telephone company also retains the right to
make changes in facilities and services which may affect the operation of this
equipment. When such changes are necessary, the telephone company is required to
give adequate prior notice to the user.
xix
What Can I Do with This Machine?
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the rear panel of this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
An FCC compliant telephone cord and modular jack are provided with this equipment.
This equipment is designed to be connected to the telephone network or premises
wiring using a compatible modular jack which is Part 68 compliant. See the Starter
Guide for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices
that may be connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most but not all
areas, the sum of RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the total RENs, contact the
local telephone company. The REN for this product is part of the product identifier that
has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 10 is a REN of 1.0).
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subjected to state tariffs.
FCC Notice
FAXPHONE L120: Facsimile Transceiver, Model F147400
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
What Can I Do with This Machine?
(2) this device must accept an interference received, including interference that may
cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15
of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in this manual. If such changes or modifications should be made, you could
be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-516-328-5600
xx
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to
use a computer or other electronic device to send any message via a telephone fax
machine unless such message clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission, the date and time it is
sent and an identification of the business or other entity, or other individual sending the
message and the telephone number of the sending machine or such business, other
entity, or individual.
In order to program this information into the machine, follow the instructions in the
Starter Guide.
What Can I Do with This Machine?
xxi
Users in Canada
Pre-Installation Requirements for Canon Facsimile
Equipment
What Can I Do with This Machine?
A. Location
Supply a suitable table, cabinet, or desk. See p. 11-1 for the machine’s weight and
dimensions.
B. Order Information
1. Provide only a single-line to touch-tone or rotary telephone set terminated with a
standard 4-pin modular phone plug. (Touch-tone is recommended if available in your
area.)
2. Order an CA11A modular jack (USOC code), which should be installed by the
telephone company. If the CA11A jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company’s business representative.
The line should be a regular voice grade line or equivalent. Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-orIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE
OVERSEAS
NOTE
Canon recommends an individual line following industry standards, e.g., the 2500 (touch tone) or
500 (rotary/pulse dial) telephones. A dedicated extension off a PBX machine without “Camp On”
signals is also permissible with the machine. Key telephone systems are not recommended because
they send non-standard signals to individual telephones for ringing and special codes, which may
cause a fax error.
C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It
should be independent from copiers, heaters, air conditioners or any electric equipment
that is thermostatically controlled. The rated value is 120 volts and 15 amperes. The
CA11A modular jack should be relatively close to the power outlet to facilitate installation.
xxii
Notice
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.
NOTE
This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
xxiii
What Can I Do with This Machine?
This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical specifications were
met. It does not imply that Industry Canada approved the equipment.
Cet appareil est conforme aux Spécifications techniques des équipements terminaux
de I’lndustrie du Canada.
Ceci est confirmé par le numéro d’enregistrement. L’abréviation IC précédant le
numéro d’enregistrement signifie que I’enregistrement a été effectué sur la base de la
Déclaration de conformité indiquant que le produit est conforme aux spécifications
techniques du Canada. Ceci n’implique pas que le produit ait été approuvé par
I’industrie du Canada.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated
by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to request
the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of
the power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas.
What Can I Do with This Machine?
The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN
assigned to each terminal equipment provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement
that the sum of the Ringer Equivalence Numbers of all the devices does not exceed
five.
Le Nombre d’équivalence Ringer (REN) de cet appareil terminal est 1.0. Le REN
attribué à chaque équipement terminal fournit une indication sur le nombre maximum
de terminaux pouvant être connectés sur une interface téléphonique. La terminaison
sur une interface peut consister en n’importe quelle combinaison d’appareils, à la
condition seulement que la somme des Nombres d’équivalence Ringer de tous les
appareils ne soit pas supérieure à 5.
CANON CANADA INC.
1-800-263-1121
24 HOURS A DAY, SEVEN DAYS A WEEK
xxiv
Laser Safety
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
CAUTION
Use of controls, adjustments, or performance of procedures other than those specified in this manual may
result in hazardous radiation exposure.
The label is attached to the laser scanner machine inside the machine and is not in a
user access area.
xxv
What Can I Do with This Machine?
This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser
product under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act of
1968. This means that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine during
any phase of user operation.
Before Using the
Machine
Machine Components
I
J
A
B
C
D
E
A
Paper delivery tray
Before Using the Machine
Outputs printouts.
B
Paper delivery tray extension
Extension for the paper output tray.
C
Cartridge cover
Open it when replacing the toner cartridge or
removing jammed paper.
D
Notch
Used to open the cartridge cover.
E
Operation panel
Controls the machine.
F
L
K
N F M G H
Document release lever
Releases jammed document.
G
Document guides
Set to the width of documents.
H
Automatic document feeder (ADF)
Feeds documents automatically into the
machine for scanning.
I
Document feeder tray
Holds documents.
J
Document feeder tray extension
Extension for the document feeder tray.
K
Document delivery tray
Outputs scanned documents. Part of paper
stack cover.
L
Document delivery tray extension
Extension for the document delivery tray.
M
Paper stack cover
Protects paper supply in the machine from
dirt and dust.
1-1
Q
O
N
Scanning Platform
Scans document.
O
Handset
For using the machine as a telephone or
receiving faxes remotely.
Handset cradle
Before Using the Machine
P
Cradle for the handset.
Q
USB port
Connect the USB cable.
R
Handset jack
Connect the handset.
S
R S T
U
V
P
External device jack
Connect an external device if necessary.
T
Line jack
Connect the telephone cable.
U
Handset cable retainer
Hook the handset cable to retain the slack.
V
Power socket
Connect the power cord.
1-2
Operation Panel
A
One-Touch Speed Dialing buttons
Enters recipients registered for one-touch
speed dialing or group dialing.
A
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
B
Displays messages and prompts during
operation. Also displays selections, text, and
numbers when specifying settings.
Before Using the Machine
C
D
E
C
D
F
G
I
J
N
O
E
Redial
Pause
Hook
H
GHI
DEF
2
JKL
4
PQRS
MNO
5
TUV
7
6
8
9
G
Clear
S
#
Directory button
Displays and searches the list of recipients
registered in the machine.
R
Stop/Reset
H
Coded Dial button
Enters recipients registered for coded speed
dialing.
Start
SYMBOLS
0
Image Quality button
Adjusts the image quality for scanning
documents.
P
Q
P
WXYZ
OPER
Tone
3
F
Set
K
ABC
Status button
Displays transaction results and prints
reports and lists.
Copy
Image Quality Directory Coded Dial
1
L
Status
Menu button
Accesses the setting menu for customizing
machine operations.
B
Menu
Additional Mode button
Accesses additional fax modes.
FAXPHONE L120
Add.Mode
LCD
T
I
Redial button
Redials the number last dialed.
M
J
Pause button
Inserts paus when entering a fax number.
K
Hook button
Opens and closes the line monitor.
L
Numeric buttons
Enter letters and numbers.
M
Tone button
Switches to tone dialing when in the pulse
mode.
N
Copy button
Enters the copy standby mode.
1-3
O
Left/Right button
Selects menu items and moves cursors.
P
Up/Down button
Scrolls through the setting menu and
registered recipients.
Q
Set button
Confirms an operation or registers
information you enter.
R
Clear button
Clears an entry in the LCD.
S
Stop/Reset button
T
Before Using the Machine
Cancels machine operations and returns to
the standby mode.
Start button
Starts scanning documents for sending or
copying.
1-4
LCD (Standby Mode)
Before Using the Machine
Fax Mode
Copy Mode
A
B
C
A
B
C
16:00
-SET
STD
DOC.- FAX
100%
ONLY
TEXT
x1.00
LT
3
D
D
E
E
A
Time
A
Image quality
B
Image quality
B
Zoom ratio
C
Memory available
C
Quantity
D
Message
D
Density
E
Receive mode
E
Paper size and type (for non-plain paper)
1-5
Handset
The handset is used to use the machine as a telephone and a fax machine, and to
receive faxes manually.
NOTE
For how to install the handset, see “Connect Telephone Cables and Install Handset,” in the Starter Guide.
Maintaining the Handset
–
–
–
–
Do not leave the handset exposed to direct sunlight.
Do not install the handset in hot or humid conditions.
Do not spray aerosol polish on the handset as it may cause damage.
Use a damp cloth to wipe clean the handset.
1-6
Before Using the Machine
Use a sharp object (i.e., pen) to select the ring volume of the handset.
Toner Cartridge
Before Using the Machine
The only component of the machine that needs to be replaced is the toner cartridge.
The machine comes with a starter cartridge, which yields approximately 1,000 pages
based on 5% coverage of an A4-size page. A Canon genuine replacement cartridge
yields approximately 2,000 pages based on 5% coverage of an A4-size page. To
purchase this cartridge, contact your local Canon dealer or Canon Customer Care
Center (1-800-828-4040).
Cartridge name:
Canon Cartridge 104
Maintaining the Toner Cartridge
● Keep the toner cartridge away from computer screens, disk drives, and floppy disks.
The magnet inside the cartridge may harm these items.
● Avoid locations subject to high temperature, high humidity, or rapid changes in
temperature.
● Do not expose the cartridge to direct sunlight or bright light for more than five
minutes.
● Store the cartridge in its protective bag. Do not open the bag until you are ready to
install the cartridge in the machine.
● Save the cartridge’s protective bag in case you need to repack and transport the
cartridge at a later date.
● Do not store the cartridge in a salty atmosphere or where there are corrosive gases
such as from aerosol sprays.
● Do not remove the cartridge from the machine unnecessarily.
● Do not open the drum protective shutter on the cartridge. Print quality may
deteriorate if the drum surface is exposed to light or is damaged.
● Always hold the cartridge by its handle to avoid touching the drum protective shutter.
● Do not stand the toner cartridge on end, and do not turn it upside down. If toner
becomes caked in the cartridge, it may become impossible to free it even by shaking
the cartridge.
CAUTION
Do not place the toner cartridge in fire. Toner powder is flammable.
1-7
Before Using the Machine
1-8
Document Handling
Document Handling
Document Requirements
Size (W x L)
Quantity (for 75 g/m2 paper)
Weight
Max. 8.5 x 15.75 in.
(216 x 400 mm)
Min. 5.8 x 4.1 in.
(148 x 105 mm)
Max. 30 A4- or letter-size sheets
Max. 10 legal-size sheets
or the stack height of 0.2 in. (5 mm)
17 to 28 Ib. (64 to
105 g/m2)
NOTE
If using fine art paper, it should be 0.004 in. (0.1 mm) or thicker per sheet.
● To prevent document jams, do not use any of the following:
– Wrinkled or creased paper
– Carbon paper or carbon-backed paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Onion skin or thin paper
– Documents with staples or paper clips attached
– Paper with fresh glue, ink, or correction fluid that is not completely dry
2-1
Scanned Area
Make sure your document’s text and graphics fall within the shaded area in the
following diagram. Note that the margin widths listed are approximate and there
may be slight variations in actual use.
Document Handling
0.08" (2 mm)
0.08" (2 mm)
0.04" (1 mm) 0.04" (1 mm)
2-2
Document Handling
Loading Documents
1
Adjust the document guides to the width of the document.
2
Fan the document stack and even the edges.
3
Insert the document top edge first in the ADF with the printed side facing
up.
The document is ready for scanning.
2-3
Document Handling
2-4
Print Media
Print Media
Paper Requirements
Paper Size Setting
Size (W × L)
Weight
Quantity
<LT> (Letter)
8.5 × 11 in.
(216 × 279 mm)
16 to 43 lb.
(60 to 163 g/m2)
Max. stack height: 0.6 in.
(15 mm) (Approx.
150 sheets of 20 lb. (75 g/
m2) paper)
<LG> (Legal)
8.5 × 14 in.
(216 × 356 mm)
<A4>
8.3 × 11.7 in.
(210 × 297 mm)
Paper Type Setting
Paper Type
Weight
<PLAIN>
Plain paper
16 to 24 lb.
(60 to 90 g/m2)
Heavy paper
24 to 43 lb.
(91 to 163 g/m2)
<PLAIN L>*1
<HEAVY>
<HEAVY H>*2
<TRANSPARENCY>
Transparencies
*1 If paper curls excessively when printed with <PLAIN> selected, select <PLAIN L>.
*2 If print fixing is not sufficient when printed with <HEAVY> selected, select
<HEAVY H>.
NOTE
– If the size of paper loaded in the machine is not Letter (default), make sure to set a correct paper size.
(See “Setting Paper Type and Size,” on p. 3-7.)
– For transparencies, you can load only up to 100 sheets.
3-1
Printable Area
The shaded area indicates the approximate printable area of Letter-size paper.
0.08" (2 mm)
Print Media
0.20" (5 mm)
0.08" (2 mm) 0.08" (2 mm)
3-2
Print Media
Paper Guidelines
● To prevent paper jams, do not use any of the following:
– Wrinkled or creased paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Damp paper
– Very thin paper
– Paper which has been printed on using a thermal transfer printer (Do not copy on
the reverse side.)
● The following types of paper do not print well:
– Highly textured paper
– Very smooth paper
– Shiny paper
● Make sure the paper is free from dust, lint, and oil stains.
● Be sure to test paper before purchasing large quantities.
● Store all paper wrapped and on a flat surface until ready for use. Keep opened packs
in their original packaging in a cool, dry location.
● Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative humidity.
● Use only the transparencies designed for laser printers.
3-3
Loading Paper
For loading Letter-size paper, see “Load Paper,” in the Starter Guide.
Loading Envelopes
1
Place the stack of envelopes on a firm, flat surface, and press down firmly
on the edges to make the folds crisp.
Press all the way around the envelopes to remove any curls and expel air from inside the
envelopes. Make sure that the stack is flat before loading it in the machine.
2
Lift the paper stack cover and pull it out completely.
3-4
Print Media
● Use standard envelopes with diagonal seams and flaps.
● To prevent jams, do not use the following:
– Envelopes with windows, holes, perforations, cutouts, and double flaps
– Envelopes made with special coated paper or deeply embossed paper
– Envelopes with peel-off sealing strips
– Envelopes with letters enclosed
– Make sure to set the correct envelope size in the printer driver. (See Chapter 2,
“Printing,” in the Software Guide.)
NOTE
Make sure the back end of the cover does not catch the front paper guide.
Pull out the paper guide rail.
4
Insert the envelope stack (up to 10 envelopes) with the print side facing up.
5
Adjust the side paper guides to the size of the stack.
Print Media
3
3-5
Push back the paper guide rail to the front edge of the stack.
7
Pinch and slide the front paper guide to match the envelope size.
8
Insert the paper stack cover.
Print Media
6
NOTE
Make sure the back end of the cover does not catch and lower the scanning platform.
3-6
Setting Paper Type and Size
The machine is factory-set to accept plain-type Letter-size paper. If you loaded
different type and/or size of paper in the machine, follow this procedure to
change the paper type/size setting.
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
Print Media
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
OPER
9
Start
SYMBOLS
0
#
Tone
1
2
3
Press [Menu].
Use [Up/Down] to select <PAPER SOURCE SETUP?>, then press [Set].
Use [Left/Right] to select the paper type, then press [Set].
<PLAIN>: Plain paper.
<PLAIN L>: Light paper.
<HEAVY>: Heavy paper.
<HEAVY H>: Heavier paper.
<TRANSPARENCY>: Transparencies.
3-7
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Print Media
4
Use [Left/Right] to select the paper size, then press [Set].
<LT>: Letter.
<LG>: Legal (not available for transparencies).
<A4>: A4.
5
Press [Stop/Reset] to return to standby mode.
3-8
Sending Faxes
Follow this procedure to send a fax.
1
Load a Document
2
Adjust Image Quality
Add.Mode
A
Menu
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
Sending Faxes
Status
GHI
DEF
2
JKL
4
PQRS
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
B
Hook
0
#
Tone
Adjust the document guides (A) to
the width of the document, and
insert the document top edge first
in the ADF (B) with the printed side
facing up.
For documents you can fax, see “Document
Requirements,” on p. 2-1.
4-1
Press [Image Quality]. Use [Left/
Right] to select resolution and
image type, and press [Set].
Select from the following:
<STD>: Standard
<FINE>: Fine
<S/F>: Superfine
<H/T>: Halftone (and select resolution)
For details, see “Scan Settings,” on p. 4-3.
3
Enter the Fax Number
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
DEF
2
JKL
4
3
MNO
5
TUV
7
6
Add.Mode
Set
Redial
Stop/Reset
Start
1
0
Status
DEF
JKL
4
MNO
TUV
7
6
Copy
Set
Clear
Stop/Reset
WXYZ
8
#
Use the numeric buttons to enter
the recipient’s fax number.
3
5
9
Start
SYMBOLS
OPER
Tone
Hook
2
GHI
SYMBOLS
OPER
Pause
ABC
Clear
PQRS
9
Menu
Image Quality Directory Coded Dial
WXYZ
8
Send the Document
Sending Faxes
GHI
PQRS
Hook
4
0
#
Tone
Press [Start].
Ex.
=0123XXXXXXX
SUB=
(TX=START)
What if...
● You entered a wrong number:
Use [Left/Right] to move the cursor to
the wrong digit, then press [Clear]. Or
hold [Clear] to delete the entire entry
and try again.
What if...
● You want to cancel sending:
See Chapter 1, “Advanced Fax
Features,” in the Advanced Guide.
● The message <MEM. FULL/TX
CANCEL> is displayed:
Press any key. Wait until the machine
sends the document in memory and try
again.
4-2
Scan Settings
Adjust contrast and image quality (resolution and image type) before sending a
fax. Note that a higher resolution image requires more memory and takes longer
to transmit. The image quality setting returns to the default value if no operation
is performed for one minute, if you press [Stop/Reset], or after the document is
scanned.
Contrast
FAXPHONE L120
Sending Faxes
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
1
2
3
4
Press [Menu].
Use [Up/Down] to select <TX SETTING?>, then press [Set].
Use [Up/Down] to select <1 SCAN CONTRAST?>, then press [Set].
Use [Left/Right] to adjust scan contrast, then press [Set].
[Right]: To send a darker image.
[Left]: To send a lighter image.
5
4-3
Press [Stop/Reset] to return to standby mode.
Image Quality
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Press [Image Quality].
Use [Left/Right] to select resolution (or half-tone image type), then press
[Set].
<STD>: Standard for text-only documents.
<FINE>: Fine for fine-print documents.
<S/F>: Superfine for very fine documents. Will be displayed as <S-FINE> on LCD.
<H/T>: For documents that contain half-tone images such as photographs.
4-4
Sending Faxes
1
2
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
3
If you selected <H/T>, use [Left/Right] to select resolution, then press
[Set].
<STD>: Displayed as <STD/HT> in standby mode.
<FINE>: Displayed as <F/HT> in standby mode.
<S/F>: Displayed as <SF/HT> in standby mode.
4-5
Speed Dialing
Speed dialing allows you to dial registered recipients quickly. There are three
types of speed dialing:
Registering Recipients for Speed Dialing
For each recipient, you can register:
– Name (optional)
– Fax number (required)
– Subaddress (optional): A string of characters used to route a fax to one or more
numbers or extensions once it is received by the recipient’s machine.
– Password (optional): Used to restrict access to a subaddress and can be omitted.
4-6
Sending Faxes
● One-Touch Speed Dialing (p. 4-7)
– Specify a registered recipient using a one-touch speed dialing button. You can
register up to 15 one-touch speed dialing buttons, including group dialing.
● Coded Speed Dialing (p. 4-15)
– Specify a registered recipient using [Coded Dial] followed by a three-digit code.
You can register up to 100 coded speed dialing codes.
● Group Dialing (p. 4-22)
– Specify multiple recipients (must be registered for one-touch speed dialing and/or
coded speed dialing) with a one-touch speed dialing button. You can register up to
50 recipients in a group dial.
Registering One-Touch Speed Dialing
FAXPHONE L120
Add.Mode
Menu
Status
01
02
03
04
05
06
Set
07
08
09
Clear
10
11
12
Stop/Reset
13
14
15
Start
FAXPHONE L120
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
WXYZ
8
9
SYMBOLS
OPER
0
#
Tone
Sending Faxes
Copy
1
2
3
4
5
Utility
Copy
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <1 1-TOUCH SPD DIAL?>, then press [Set].
Press the one-touch speed dialing button (01 to 15) for this recipient.
Use the numeric buttons to enter the recipient’s name (up to 20
characters), then press [Set].
Ex.
NAME=CAN
OK=
4-7
Function
[A]
FAXPHONE L120
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Use the numeric buttons to enter the recipient’s number (up to 50 digits).
Ex.
=0123XXXXXXX
YES=SET
(SUB=
)
– Press [Pause] to enter a pause. (See “Entering Pauses,” on p. 4-30.)
– If no subaddress or password is required, skip to step 9.
4-8
Sending Faxes
6
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
Hook
DEF
2
GHI
JKL
4
3
MNO
5
PQRS
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
7
Press [Down] and use the numeric buttons to enter the subaddress (up to
20 digits) for the recipient.
If no subaddress is required, skip to step 9.
Ex.
SUB=1234_
YES=SET
8
(PWD=
)
Press [Down] and use the numeric buttons to enter the password (up to 20
digits) for the subaddress.
If no password is required, skip to step 9.
Ex.
PWD=1234_
YES=SET
9
4-9
Press [Set].
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Repeat the procedure as necessary from step 4.
Sending Faxes
10
11
12
Press [Stop/Reset] to return to standby mode.
Use the supplied destination labels to label the registered one-touch
speed dialing buttons.
4-10
Editing One-Touch Speed Dialing
FAXPHONE L120
Add.Mode
Menu
Status
01
02
03
04
05
06
Set
07
08
09
Clear
10
11
12
Stop/Reset
13
14
15
Start
FAXPHONE L120
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
WXYZ
8
9
SYMBOLS
OPER
0
#
Tone
Sending Faxes
Copy
1
2
3
4
4-11
Function
Utility
Copy
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <1 1-TOUCH SPD DIAL?>, then press [Set].
Press the one-touch speed dialing button (01 to 15) for the recipient you
want to edit, then press [Clear].
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Use [Left/Right] to select <EDIT>, then press [Set].
Use [Left/Right], [Clear], and the numeric buttons to change the recipient’s
name, then press [Set].
If no change is necessary, press [Set] without making any change.
7
Use [Left/Right], [Clear], and the numeric buttons to change the recipient’s
number.
4-12
Sending Faxes
5
6
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
8
If you want to change or enter the subaddress, press [Down].
If no subaddress is required, skip to step 11.
9
10
Use [Left/Right], [Clear], and the numeric buttons to change or enter the
subaddress, then press [Set].
Use [Left/Right], [Clear], and the numeric buttons to change or enter the
password if required.
If no password is required, skip to step 11.
11
12
13
4-13
Press [Set].
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
Deleting One-Touch Speed Dialing
FAXPHONE L120
Add.Mode
Menu
Status
01
02
03
04
05
06
Set
07
08
09
Clear
10
11
12
Stop/Reset
13
14
15
Start
FAXPHONE L120
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
WXYZ
8
9
SYMBOLS
OPER
0
#
Tone
Copy
5
6
7
Utility
Copy
Sending Faxes
1
2
3
4
Function
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <1 1-TOUCH SPD DIAL?>, then press [Set].
Press the one-touch speed dialing button (01 to 15) for the recipient you
want to delete, then press [Clear].
Use [Left/Right] to select <DELETE>, then press [Set].
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
4-14
Registering Coded Speed Dialing
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
1
2
3
4
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <2 CODED DIAL?>, then press [Set].
Use the numeric buttons to enter the three-digit code (001 to 100) for this
recipient.
Ex.
CODED
4-15
DIAL=001
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
Hook
DEF
2
GHI
JKL
4
3
MNO
5
PQRS
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
6
Use the numeric buttons to enter the recipient’s name (up to 20
characters), then press [Set].
Use the numeric buttons to enter the recipient’s number (up to 50 digits).
Ex.
=0123XXXXXXX
YES=SET
(SUB=
)
– Press [Pause] to enter a pause. (See “Entering Pauses,” on p. 4-30.)
– If no subaddress or password is required, skip to step 9.
4-16
Sending Faxes
5
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
Hook
DEF
2
GHI
JKL
4
3
MNO
5
PQRS
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
7
Press [Down] and use the numeric buttons to enter the subaddress (up to
20 digits) for the recipient.
If no subaddress is required, skip to step 9.
Ex.
SUB=1234_
YES=SET
8
(PWD=
)
Press [Down] and use the numeric buttons to enter the password (up to 20
digits) for the subaddress.
If no password is required, skip to step 9.
Ex.
PWD=1234_
YES=SET
9
10
11
4-17
Press [Set].
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
Editing Coded Speed Dialing
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Sending Faxes
1
2
3
4
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <2 CODED DIAL?>, then press [Set].
Use the numeric buttons to enter the three-digit code (001 to 100) for the
recipient you want to edit, then press [Clear].
Ex.
CODED
DIAL=001
4-18
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
5
6
Use [Left/Right] to select <EDIT>, then press [Set].
Use [Left/Right], [Clear], and the numeric buttons to change the
recipient’s name, then press [Set].
If no change is necessary, press [Set] without making any change.
7
4-19
Use [Left/Right], [Clear], and the numeric buttons to change the recipient’s
number.
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
If you want to change or enter the subaddress, press [Down].
If no subaddress is required, skip to step 11.
9
10
Use [Left/Right], [Clear], and the numeric buttons to change or enter the
subaddress, then press [Set].
Use [Left/Right], [Clear], and the numeric buttons to change or enter the
password if required.
If no password is required, skip to step 11.
11
12
13
Press [Set].
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
4-20
Sending Faxes
8
Deleting Coded Speed Dialing
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
1
2
3
4
5
6
7
4-21
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <2 CODED DIAL?>, then press [Set].
Use the numeric buttons to enter the three-digit code (001 to 100) for the
recipient you want to delete, then press [Clear].
Use [Left/Right] to select <DELETE>, then press [Set].
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
Registering Group Dialing
FAXPHONE L120
Add.Mode
Menu
Status
01
02
03
04
05
06
Set
07
08
09
Clear
10
11
12
Stop/Reset
13
14
15
Start
FAXPHONE L120
[Set]
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
WXYZ
8
9
SYMBOLS
OPER
0
#
Tone
Copy
Utility
Status
Sending Faxes
1
2
3
4
5
Function
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <3 GROUP DIAL?>, then press [Set].
Press the one-touch speed dialing button (01 to 15) for this group.
Use the numeric buttons to enter the name for the group (up to 20
characters), then press [Set].
Ex.
GROUP NAME=GRP
YES=OK
[A]
4-22
FAXPHONE L120
Add.Mode
Menu
Status
01
02
03
04
05
06
Set
07
08
09
Clear
10
11
12
Stop/Reset
13
14
15
Start
FAXPHONE L120
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
WXYZ
8
9
SYMBOLS
OPER
0
#
Tone
Sending Faxes
Copy
6
Function
Utility
Copy
Press the required one-touch speed dialing button (01 to 15) or [Coded
Dial] followed by the three-digit coded speed dialing code (001 to 100),
then press [Set].
NOTE
You cannot enter recipients not registered for one-touch or coded speed dialing (i.e., with the
numeric buttons).
7
8
9
10
4-23
Repeat the previous step as necessary to register all required recipients
(up to 50) for the group.
Press [Start] to finish registering the group.
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
Editing Group Dialing
FAXPHONE L120
Add.Mode
Menu
Status
01
02
03
04
05
06
Set
07
08
09
Clear
10
11
12
Stop/Reset
13
14
15
Start
FAXPHONE L120
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
WXYZ
8
9
SYMBOLS
OPER
0
#
Tone
Copy
5
Utility
Sending Faxes
1
2
3
4
Function
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <3 GROUP DIAL?>, then press [Set].
Press the one-touch speed dialing button (01 to 15) for the group you want
to edit, then press [Clear].
Use [Left/Right] to select <EDIT>, then press [Set].
4-24
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
MNO
TUV
Clear
3
5
7
Set
Hook
6
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Sending Faxes
Tone
6
Use [Left/Right], [Clear], and the numeric buttons to change the name for
the group name, then press [Set].
If no change is necessary, press [Set] without making any change.
7
Press [Clear] to remove the displayed recipient from the group.
If no deletion is necessary, press [Set] to proceed to the next recipient in the group.
8
9
Repeat the previous step as necessary to remove all required recipients
from the group.
If required, register additional one-touch speed dialing buttons and/or
coded speed dialing codes (up to 50 total) in the group.
If no addition is necessary, skip to step 10.
10
11
12
4-25
Press [Start] to finish changing the group.
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
Deleting Group Dialing
FAXPHONE L120
Add.Mode
Menu
Status
01
02
03
04
05
06
Set
07
08
09
Clear
10
11
12
Stop/Reset
13
14
15
Start
FAXPHONE L120
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
WXYZ
8
9
SYMBOLS
OPER
0
#
Tone
Copy
5
6
7
Utility
Copy
Sending Faxes
1
2
3
4
Function
Press [Menu].
Use [Up/Down] to select <TEL REGISTRATION?>, then press [Set].
Use [Up/Down] to select <3 GROUP DIAL?>, then press [Set].
Press the one-touch speed dialing button (01 to 15) for the group you want
to delete, then press [Clear].
Use [Left/Right] to select <DELETE>, then press [Set].
Repeat the procedure as necessary from step 4.
Press [Stop/Reset] to return to standby mode.
4-26
Using Speed Dialing
Follow the procedure below to send faxes to registered recipients using speed dialing.
For easy reference, print out the list of recipients registered for speed dialing. (See
Chapter 3, “Reports and Lists,” in the Advanced Guide.)
Sending Faxes
Using One-Touch Speed/Group Dialing
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
FAXPHONE L120
Copy
1
2
Function
Utility
Copy
Load a document.
Press the one-touch speed dialing button (01 to 15) for the required
recipient or group.
– The machine scans the document automatically.
– If you loaded the document after pressing a one-touch speed dialing button, press [Start] to
start scanning.
– Press [Stop/Reset], then [Set] to cancel sending the fax.
4-27
Using Coded Speed Dialing
FAXPHONE L120
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Sending Faxes
1
2
3
Load a document.
Press [Coded Dial].
Use the numeric buttons to enter the three-digit coded speed dialing code
(001 to 100) for the required recipient.
Ex.
CODED
DIAL=001
If you entered a wrong code, press [Clear] and try again.
4
Press [Start].
Press [Stop/Reset], then [Set] to cancel sending the fax.
4-28
Manual Sending
Manual sending using the handset or an external telephone allows you to talk to
the recipient before sending a fax. This is useful if the recipient must manually
prompt their machine to receive your document. You can also use [Hook] to
monitor the dialing process without using the handset.
Sending Faxes Manually
FAXPHONE L120
Add.Mode
Menu
Status
Copy
Sending Faxes
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
1
2
Load a document.
Pick up the handset or press [Hook] and dial the recipient’s number.
– You can dial from the operation panel or an external telephone.
– If you made a mistake, hang up the handset or press [Hook] again and start over.
3
When you hear a fax tone, press [Start] to start sending the document.
– If you pressed [Hook] instead of using the handset, you will not be able to talk to the recipient.
– Hang up the handset after pressing [Start].
4-29
Entering Pauses
Enter pauses if required when you dial or register an overseas number.
FAXPHONE L120
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Sending Faxes
1
Press [Pause] to enter a pause in a fax number.
Each pause entered is 2.5 seconds.
2
Continue entering the rest of the fax number with the numeric buttons.
4-30
Receiving Faxes
Follow this procedure to set the machine for receiving faxes.
For advanced receiving features, see Chapter 1, “Advanced Fax Features,” in the
Advanced Guide.
1
Enter the Setting Menu
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
Receiving Faxes
1
GHI
DEF
2
JKL
4
PQRS
3
MNO
5
TUV
7
6
Enter the Receive Mode Setting
Add.Mode
Set
Redial
Stop/Reset
Start
1
GHI
0
Press [Menu].
Status
DEF
JKL
3
MNO
5
TUV
7
6
Copy
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
#
Hook
2
4
SYMBOLS
Tone
Pause
ABC
Clear
PQRS
9
Menu
Image Quality Directory Coded Dial
WXYZ
8
OPER
5-1
Hook
2
0
#
Tone
Use [Up/Down] to select
<RX SETTING?>, then press [5].
3
Select the Receive Mode
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
GHI
DEF
2
JKL
4
PQRS
3
MNO
5
TUV
7
6
Add.Mode
Set
Redial
Stop/Reset
Start
1
0
Status
DEF
JKL
4
MNO
TUV
7
<FAX/TEL>: Switches between fax and voice calls
automatically.
<MANUAL>: Does not answer any call. You have to
manually receive faxes.
<FAX ONLY>: Answers all calls as faxes and
disconnects voice calls.
<AnsMode>: Receives faxes automatically and records
voice messages.
<DRPD>: Distinguishes between fax and voice calls.
6
Copy
Set
Clear
Stop/Reset
WXYZ
8
#
Use [Left/Right] to select the
receive mode, then press [Set].
3
5
9
Start
SYMBOLS
OPER
Tone
Hook
2
GHI
SYMBOLS
OPER
Pause
ABC
Clear
PQRS
9
Menu
Image Quality Directory Coded Dial
WXYZ
8
Exit the Setting Menu
Receiving Faxes
1
Hook
4
0
#
Tone
Press [Stop/Reset].
What if...
● You want to cancel receiving:
See Chapter 1, “Advanced Fax
Features,” in the Advanced Guide.
NOTE
– For <AnsMode>, make sure an answering
machine is connected to the machine.
– For <DRPD>, subscription to a DRPD
service is required.
5-2
Copying
Follow this procedure to make a copy.
1
Load a Document
2
Enter the Copy Mode
Add.Mode
A
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
B
Hook
0
#
Copying
Tone
Adjust the document guides (A) to
the width of the document, and
insert the document face up in the
ADF (B).
For documents you can copy, see Chapter 2,
“Document Handling.”
6-1
Press [Copy].
The copy mode automatically resets to the fax mode
after one minute of inactivity, or when you press [Stop/
Reset].
3
4
Enter Quantity
Add.Mode
Menu
Status
Add.Mode
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
DEF
2
GHI
JKL
4
PQRS
Hook
3
MNO
5
TUV
6
Set
Redial
1
0
Status
DEF
JKL
4
MNO
TUV
6
Copy
Clear
Stop/Reset
9
Start
SYMBOLS
0
#
Set
WXYZ
8
OPER
Tone
3
5
7
Start
Hook
2
GHI
Stop/Reset
SYMBOLS
OPER
Pause
ABC
Clear
PQRS
9
Menu
Image Quality Directory Coded Dial
WXYZ
8
7
Start Copying
#
Tone
Copying
Use numeric buttons to enter the
number of copies (up to 99). Skip if
you are making a single copy.
Press [Start].
Ex.
TEXT
x1.00
LT
3
What if...
● You entered a wrong number:
Press [Clear] and enter a new number.
Did you know...
● You can adjust image quality and
density:
See “Scan Settings,” on p. 6-3.
What if...
● You want to cancel copying:
See Chapter 1, “Advanced Fax
Features,” in the Advanced Guide.
6-2
Scan Settings
Before pressing [Start] to start copying, you can adjust scan settings to better
suit the document to be scanned. These settings return to the default values if
you press [Stop/Reset].
Image Quality
FAXPHONE L120
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
JKL
3
MNO
5
TUV
7
Copying
DEF
2
4
PQRS
Hook
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
1
Press [Image Quality] to select either <TEXT> or <PHOTO>.
<TEXT>: For scanning text documents.
<PHOTO>: For documents that contain fine text and photographs.
6-3
Density
FAXPHONE L120
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
1
Press [Left/Right] to adjust scan density.
Copying
[Right]: For a darker copy.
[Left]: For a lighter copy.
6-4
Zoom Ratio
FAXPHONE L120
Add.Mode
Menu
Status
Copy
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
Copying
1
Press [Up/Down] to enlarge or reduce the copied image in 1% (0.01)
increments.
[Up]: Enlarge up to 200% (2.00) of the original size (1.00).
[Down]: Reduce down to 50% (0.50) of the original size (1.00).
6-5
Copying
6-6
Printing
Follow this procedure to print a document from your computer.
Make sure that the printer driver is installed.
For details on printer driver settings, see the Software Guide (in the User Software
CD).
Start the Print Command
2
Select the Printer
Printing
1
From an open document on an
application, click [File] ➞ [Print].
7-1
Select the printer icon for the
machine ([Canon L120]).
3
Adjust Preferences
4
Print the Document
Printing
Click [Preferences] to open the
dialog box. After finished, click
[OK].
Click [Print].
What if...
● You want to cancel printing:
See Chapter 2, “Printing,” in the
Software Guide.
7-2
Maintenance
Cleaning the Machine
Maintenance
Note the following before cleaning
your machine:
– Before cleaning the machine, print
or send any documents stored in
memory and disconnect the power
cord.
– Make sure to use a soft cloth to
avoid scratching the components.
– Do not use tissue paper, paper
towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.
CAUTION
Never use volatile liquids such as thinners,
benzene, acetone, or any other chemical cleaner to
clean the machine. These can damage the
machine components.
8-1
Exterior
1
2
3
Disconnect the power cord from
the machine.
Wipe the machine’s exterior with
a clean, soft, lint-free cloth
moistened with water or diluted
dishwashing detergent solution.
Wait for the machine to dry, and
reconnect the power cord.
3
Interior
Clean the machine’s print area
periodically to prevent toner powder and
paper dust from accumulating inside.
1
2
Open the cartridge cover by the
notch (A).
A
Disconnect the power cord from
the machine.
Close the paper delivery tray
extension (A), and then the
paper delivery tray (B) itself.
4
Remove the cartridge.
A
CAUTION
Do not close the paper delivery tray without
folding the extension first.
– Always hold the cartridge by its handle.
– To avoid exposing the cartridge to light,
place it in its protective bag or wrap it in a
thick cloth.
8-2
Maintenance
NOTE
B
5
Use a clean, soft, dry, lint-free
cloth to remove any toner or
paper debris from the machine’s
interior.
7
Insert the cartridge into the
machine as far as it will go.
Align the guide (A) on the left side of the
cartridge with the groove inside the
machine.
A
CAUTION
– Do not touch the fixing assembly (A) as
it becomes very hot during use.
– Do not touch the pins (B) or the transfer
roller (C) as this can damage the
machine.
8
B
C
A
– If loose toner comes into contact with
your skin or clothing, wash with cold
water. Warm water will set the toner.
6
NOTE
Be careful not to get your fingers caught.
Hold the cartridge by its handle.
The arrow (A) on the cartridge should be
facing away from you and pointing down.
Maintenance
Close the cartridge cover.
9
Open the paper delivery tray and
the extension.
A
10
8-3
Reconnect the power cord.
Scanning Area
4
Keep the scanning area clean to avoid
dirty copies or faxes to be sent.
1
2
Gently wipe the scanning glass
(A) and white sheet (B) with a
clean, soft, lint-free cloth
moistened with water.
Disconnect the power cord from
the machine.
B
Lift the paper stack cover and
pull it out completely.
A
5
After the scanning area
becomes dry, lift the scanning
platform back into place.
NOTE
Make sure the back end of the cover does
not catch the front paper guide.
3
6
Maintenance
Lower the scanning platform (A)
in the document delivery slot.
Insert the paper stack cover.
A
NOTE
Make sure the back end of the cover does
not catch and lower the scanning platform.
7
Reconnect the power cord.
8-4
Replacing the Cartridge
When the LCD displays <CHANGE
TONER>, redistribute toner in the
cartridge. If the message persists,
replace the cartridge.
2
Open the cartridge cover by the
notch (A).
A
Redistributing Toner
1
Close the paper delivery tray
extension (A), and then the
paper delivery tray (B) itself.
B
3
A
Remove the cartridge.
NOTE
Maintenance
Always hold the cartridge by its handle.
CAUTION
Do not close the paper delivery tray without
folding the extension first.
8-5
4
Gently rock it several times to
redistribute toner inside.
5
Hold the cartridge by its handle.
The arrow (A) on the cartridge should be
facing away from you and pointing down.
8
Open the paper delivery tray and
the extension.
A
6
Insert the cartridge into the
machine as far as it will go.
Align the guide (A) on the left side of the
cartridge with the groove inside the
machine.
A
Close the cartridge cover.
Maintenance
7
NOTE
Be careful not to get your fingers caught.
8-6
Replacing the Cartridge
1
3
Remove the old cartridge.
Close the paper delivery tray
extension (A), and then the
paper delivery tray (B) itself.
NOTE
Always hold the cartridge by its handle.
4
B
A
Remove the new cartridge from
the protective material.
CAUTION
Do not close the paper delivery tray without
folding the extension first.
2
Open the cartridge cover by the
notch (A).
Maintenance
A
8-7
5
Gently rock it several times to
distribute toner inside.
6
Hold the cartridge with one
hand, and pull out the seal
completely.
9
Close the cartridge cover.
NOTE
Be careful not to get your fingers caught.
NOTE
Do not pull out the seal at an angle.
7
10
Open the paper delivery tray and
the extension.
Hold the cartridge by its handle.
The arrow (A) on the cartridge should be
facing away from you and pointing down.
A
Maintenance
8
Insert the cartridge into the
machine as far as it will go.
Align the guide (A) on the left side of the
cartridge with the groove inside the
machine.
A
8-8
Recycling Used Cartridges
Canon has instituted a worldwide recycling program for cartridges
called “The Clean Earth Campaign.” This program preserves
precious natural resources by utilizing a variety of materials found in
the used cartridges that are of no further use, to remanufacture new
cartridges which, at the same time, keeps the environment cleaner
by reducing landfill waste. Complete details concerning this program
are enclosed in each PC Cartridge box.
The Clean Earth Campaign
● THE Canon CARTRIDGE RECYCLING PROGRAM
Maintenance
The Canon Cartridge Recycling Program fulfills the first initiative of Canon’s Clean
Earth Campaign, which supports four critical environmental areas:
● Recycling in the Workplace
● Conserving Environmental Resources
● Scientific Research and Education
● Encouraging Outdoors Appreciation
The remaining “Clean Earth” initiatives are supported in the U.S. through sponsorships
of the National Park Foundation, the National Wildlife Federation, and The Nature
Conservancy and in Canada through donations to the World Wildlife Fund Canada and
The Nature Conservancy of Canada.
Since its inception, The Canon Cartridge Recycling Program has collected millions of
cartridges that otherwise would have been discarded into landfills or similar facilities.
Instead, this rapidly growing program returns used cartridges to the manufacturing
process, thus conserving an array of resources.
8-9
Becoming a part of this worthwhile program is easy. When your cartridge is of no
further use, simply follow the instructions detailed for U.S. or Canadian residents.
We appreciate your support of The Canon Cartridge Recycling Program.
Working together we can make a significant contribution to a cleaner planet.
● Cartridges collected through this program are not refilled.
● You are not entitled to a tax deduction or rebate for the return of empty cartridges.
● This program may be modified or discontinued without notice.
● Packaging
■ Option A-1: Single Box Return
● Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks
from the new cartridge’s box.
● Place the empty cartridge in the box of your new cartridge. Seal the box.
8-10
Maintenance
U.S.A. PROGRAM
■ Option B: Volume Box Return
We encourage you to use this option as a more efficient way to ship cartridges.
● Place as many cartridges as possible into one box.
Carefully seal the box with tape;
or
● Call 1-800-OK-Canon to receive your free eight cartridge collection box.
Maintenance
■ Option A-2: Multiple Box Return
We encourage you to use this option as a more efficient way to ship cartridges.
● Complete Option A-1.
● Bundle multiple cartridge boxes together securely with tape.
Please be sure that the shipment does not exceed UPS specifications.
Maximum weight = 70 lb. (31.8 kg)
Maximum length = 108 in. (2,743 mm)
Maximum girth (length + 2 x width + 2 x height) = 130 in. (3,302 mm)
If your shipment exceeds the above limits, please call 1-800-OK-Canon for special
shipping information.
Please Note:
Do not send defective cartridges for replacement.
Defective cartridges under warranty should be exchanged by an authorized dealer
or service facility as provided in the warranty.
8-11
● Shipping
Apply the UPS authorized returning label provided in this guide.
Residents of Alaska and Hawaii: Do not use the UPS authorized returning label. For
Alaska and Hawaii Canon set up alternative mail service with the U.S. Postal Service.
Please call 1-800-OK-Canon to receive U.S. Postal Service merchandise returning
label.
■ Option A: UPS Pick-up
● Give the shipment to your UPS driver when you receive your next regular delivery;
or
● Take the shipment to your local UPS receiving point.
■ Option B: MBE Drop off
Take the shipment to a participating MBE (Mail Boxes, Etc.) Center.
For location, please call 1-800-949-6660.
Maintenance
By using either of the above methods of shipment, your used cartridge(s) will
be forwarded to the Canon Cartridge Collection Center at no charge to you.
For further information about the Clean Earth Campaign in the United States, please
call: 1-800-OK-Canon
8-12
CANADA PROGRAM-CANADA PROGRAMME
Maintenance
■ Option A: Single Box Return
● Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks
from the new cartridge’s box.
● Place the empty cartridge in the box of your new cartridge. Seal the box.
● Apply the Canon Canada Inc./Canada Post label provided in this brochure.
Canon’s labels are specially marked so that Canon pays the postage.
● Deposit your empty cartridge in any full size street mailbox or take it to your local
Canada Post outlet or franchise.
■ Option B: Volume Box Return (eight or more cartridges)
We encourage you to use this option as a more efficient way to ship cartridges.
● Call 1-800-667-2666 to receive your free Canon collection box kit.
● The collection box can accommodate eight individual cartridge boxes.
● Place your eight individually packaged boxes of empty cartridges into the Canon
collection box. Seal the box.
● Apply the Canon Canada Inc./Canada Post label provided in this brochure.
● Canon’s labels are specially marked so that Canon pays the postage.
● Deliver to any local Canada Post outlet or franchise. Customers who hold a
Commercial pick-up agreement with Canada Post may have their collection box
picked up.
8-13
Working to preserve endangered species is a long-standing Canon interest.
To this end, for every cartridge collected, Canon Canada donates $1, shared equally
between World Wildlife Fund Canada and the Nature Conservancy of Canada. This
donation is utilized in Canada.
● For further information about The Clean Earth Campaign in Canada, please call or
write to Canon.
1-800-667-2666
Canon Canada Inc.
Corporate Customer Relations
6390 Dixie Road
Mississauga, ON L5T 1P7
Maintenance
8-14
Transporting the Machine
Follow this procedure to avoid
vibration damage to the machine when
transporting it over a long distance.
1
2
4
Disconnect the power cord and
all the cables from the back of
the machine.
Close the paper delivery tray
extension (A), and then the
paper delivery tray (B) itself.
NOTE
– Always hold the cartridge by its handle.
– To avoid exposing the cartridge to light,
place it in its protective bag or wrap it in a
thick cloth.
5
B
Maintenance
Remove the cartridge.
Close the cartridge cover.
A
CAUTION
Do not close the paper delivery tray without
folding the extension first.
3
Open the cartridge cover by the
notch (A).
A
8-15
NOTE
Be careful not to get your fingers caught.
6
Push down the document feeder
tray extension (A), then close the
document feeder tray (B).
B
7
A
Fold the document delivery tray
extension (A), and then push the
document delivery tray (B) into
the machine.
B
Maintenance
A
CAUTION
Do not open or close the document
delivery tray extension after the document
delivery tray is pushed into the machine.
8-16
Troubleshooting
Clearing Jams
NOTE
2
Do not force jammed document or paper out of the
machine. Contact Canon Customer Care Center
for assistance.
Lift the paper stack cover and
pull it out completely.
Document Jams
When a document jams in the machine,
the LCD displays <ORIGINAL DOC.
JAM> and <REMOVE ORIG. IN ADF>. A
jammed document can be pulled out from
the ADF or the document delivery slot.
Lift the document release lever.
Make sure the back end of the cover does
not catch the front paper guide.
3
Lower the scanning platform (A)
in the document delivery slot.
Troubleshooting
1
NOTE
A
If a multi-page document is loaded, remove
the entire document from the ADF.
9-1
4
5
Carefully pull out the jammed
document.
7
Lift the scanning platform back
into place.
8
Press [Stop/Reset] to return to
standby mode.
Troubleshooting
6
Lower the document release
lever back into place.
Insert the paper stack cover.
NOTE
Make sure the back end of the cover does
not catch and lower the scanning platform.
9-2
2
Paper Jams
When paper jams in the machine, the
LCD displays <PAPER JAM> and <OPEN
CARTRIDGE COVER>. Try to remove
jammed paper from inside the machine
first, then from the paper feeder if
necessary. Check the following if you
experience repeated paper jams:
– Fan and tap the paper stack on a flat
surface before loading it in the
machine.
– Check that the paper you are using
meets the requirements for use. (See
“Print Media,” on p. 3-1.)
– Make sure you have removed any
scraps of paper from inside the
machine.
Open the cartridge cover by the
notch (A).
A
CAUTION
Always open the cartridge cover first before
removing jammed paper inside the
machine.
3
Remove the cartridge.
Inside the Machine
Close the paper delivery tray
extension (A), and then the
paper delivery tray (B) itself.
Troubleshooting
1
NOTE
– Always hold the cartridge by its handle.
– To avoid exposing the cartridge to light,
place it in its protective bag or wrap it in a
thick cloth.
4
B
A
CAUTION
Do not close the paper delivery tray without
folding the extension first.
9-3
Carefully pull jammed paper out
of the machine.
6
CAUTION
– Do not touch the fixing assembly (A) as
it becomes very hot during use.
– Do not touch the pins (B) or the transfer
roller (C) as this can damage the
machine.
Align the guide (A) on the left side of the
cartridge with the groove inside the
machine.
A
7
B
C
Insert the cartridge into the
machine as far as it will go.
Close the cartridge cover.
A
– If you tear the paper, remove any torn
pieces to avoid further jams.
– If loose toner comes into contact with
your skin or clothing, wash with cold
water. Warm water will set the toner.
5
Hold the cartridge by its handle.
NOTE
The arrow (A) on the cartridge should be
facing away from you and pointing down.
A
Be careful not to get your fingers caught.
8
Open the paper delivery tray and
the extension.
Troubleshooting
9-4
Paper Feeder
3
Insert the paper stack cover.
If you cannot reach the jammed paper
from inside the machine, try removing it
from the paper feeder.
1
Lift the paper stack cover and
pull it out completely.
`
NOTE
Make sure the back end of the cover does
not catch and lower the scanning platform.
NOTE
Make sure the back end of the cover does
not catch the front paper guide.
Carefully pull jammed paper
from inside the slot.
Troubleshooting
2
NOTE
If you tear the paper, remove any torn
pieces to avoid further jams.
9-5
LCD Messages
See the table below when the LCD displays error messages.
Description
Action
CARTRIDGE COVER OPEN
CLOSE CRG. COVER
The cartridge cover is open.
Close the cartridge cover.
CHECK SCAN PLATFORM
The scanning platform is
dirty, or not set into scanning
position.
Clean the scanning area, or
lift the scanning platform into
place.
Comm.Err
Communication is
disconnected. (only in the
copy mode)
Resend the fax or ask the
other party to send their fax
again.
Check with the other party if
their machine is set correctly
for the required function.
COMM.ERROR
(xxxx)
Communication is
disconnected.
Resend the fax or ask the
other party to send their fax
again.
DESTINATION SET
BY MANUAL UP TO 16
Maximum number of
recipients (16) were
manually entered for
broadcasting or polling.
Resend the document to
other recipients if necessary.
DRAM LOST
The data in memory was lost
when the machine was
turned on.
The machine automatically
returns to standby mode.
DUPLICATE SETTING
The same recipient was
entered twice.
Select a different recipient.
Fax Err
The telephone line is busy or
there was no answer. (only in
the copy mode)
Check if the recipient’s
number is correct or the
telephone cable is properly
connected.
9-6
Troubleshooting
Message
Message
Description
Action
Reception cannot be
completed because all
memory files are used.
Wait for the machine to finish
jobs in memory and try
again.
FILE FULL/TX CANCEL
Transmission is canceled
because all memory files are
used.
Wait for the machine to finish
jobs in memory and try
again.
HANG UP THE PHONE
The handset or an external
telephone is off the hook.
Hang up the handset or the
telephone.
LINE PROBLEM
CHECK LINE
The telephone line is busy or
there was no answer.
Check if the recipient’s
number is correct or the
telephone cable is properly
connected.
MEM. FULL/RX CANCEL
Reception cannot be
completed due to insufficient
memory.
Print out or delete
documents in memory and
ask the other party to send
the fax again.
MEM. FULL/TX CANCEL
Transmission is canceled
due to insufficient memory.
No operation is performed
for one minute after the
memory becomes near full.
Wait for the machine to send
documents in memory and/
or lower the resolution and
try scanning the document
again.
Press any key and remove
the document from the ADF.
NO POLL RX DOC.
The remote machine does
not have a document for
polling.
Check the telephone number
or ask the other party to set
the document for polling.
Troubleshooting
FILE FULL/RX CANCEL
9-7
Message
Description
Action
The remote machine does
not support relay
broadcasting.
Send the fax without using
relay feature.
NO TONER CARTRIDGE
PUT IN CARTRIDGE
The machine has no
cartridge.
Install cartridge.
NOT AVAILABLE
The selected setting is not
available for this model.
Skip the setting.
NOT REGISTERED
No recipient is registered in
the selected speed dialing
button or code.
No recipient had been
registered for speed dialing
when [Directory] was
pressed.
No dialing had been made
when [Redial/Pause] was
pressed.
Select a registered button or
code.
Register recipients for speed
dialing.
Press [Redial/Pause] only
after dialing had been made
previously.
ORIGINAL DOC.JAM
REMOVE ORIG. IN ADF
There is a document jam.
Clear the document jam.
PAPER EMPTY
LOAD PAPER (paper size)
Paper has run out or there
was a jam in the paper
feeder.
Load paper or clear the
paper jam, and press [Stop/
Reset].
PAPER JAM
OPEN CARTRIDGE COVER
There is a paper jam.
Clear the paper jam.
PAPER SIZE ERROR
CHK PAPER SIZE
The size of paper loaded in
the machine does not match
the paper size setting.
Load the correct-size paper
or change the paper size
setting.
PRN Err
The data from the PC was
not printed.
Check if the software is
installed properly or if the
printer cable is properly
connected.
9-8
Troubleshooting
NO RELAY FUNCTION
Troubleshooting
Message
Description
Action
REDIAL ALL FAILED
All redialing attempts have
failed.
Check if the recipient’s
number is correct or the
telephone cable is properly
connected, and try again.
SAME GROUP DIAL KEY
The selected one-touch
speed dialing button is
already used as the group
dialing button it is being
assigned to.
Select a different one-touch
speed dialing button.
SET DOCUMENT
No document was set on the
machine when [Start] was
pressed. (only in the copy
mode)
Load a document.
SET DOC.
No document was set on the
machine when [Start] was
pressed. (only in the fax
mode)
Load a document.
SUB OR PWD ERROR
The remote machine does
not have a subaddress and/
or password set up.
Ask the other party to set a
subaddress and/or password
in their machine.
SYSTEM ERROR (Exxx)
A system error has occurred.
<xxx> will be a three-digit
code that indicates a
particular type of error.
Unplug the machine. Wait for
at least five seconds, and
reconnect the power cord. If
the message persists,
contact Canon Customer
Care Center.
THE PARTY IS FULL
Maximum number of
recipients (131) were
entered for broadcasting or
polling.
Maximum number of
recipients (50) were
registered for group dialing.
Resend the document to
other recipients if necessary.
Register a different onetouch speed dialing button
for group dialing.
TONER IS OUT
CHANGE TONER
Toner has run out.
Install a new cartridge.
9-9
Message
Description
Action
WRONG NUMBER SET
An invalid number was
entered in the date and time
setting.
Enter a correct date or time.
WRONG PASSWORD
A wrong password was
entered.
Enter the correct password.
Troubleshooting
9-10
Error Codes
An error code is a four-digit code displayed on the LCD or in the bottom row of a
TX Result Report or an RX Result Report when an error occurs.
Ex.
SESSION
FUNCTION
NO.
0001
TX
001
DESTINATION STATION
WEST-1
55555555
DATE
TIME
PAGE
DURATION
MAY.06
16:00
002
00h01min21s
MODE
G3
RESULT
STOP
00A0:TX CANCEL
Error Code
For details on TX Result Report and RX Result Report, see Chapter 3, “Reports and
Lists,” in the Advanced Guide.
See the table below for individual error codes.
Troubleshooting
Error Code
9-11
Description
Action
0001
The sender may not be using a G3
fax machine.
Make sure the sender’s machine is
compatible with your machine.
0070
Reception was manually canceled
on the machine.
Ask the sender to resend the
document if necessary.
0071
The machine’s memory is full.
Print, send, or delete any
documents stored in memory.
0080
The recipient’s machine did not
respond within 35 seconds.
Resend the document. Ask the other
party to check their machine. If you
are making an overseas call, add a
pause to the number.
008D
The recipient’s machine has run out
of paper.
Ask the recipient to make sure that
paper is loaded in their machine.
00A0
Transmission was manually
canceled on the machine.
Resend the document if necessary.
00A1
There is a document jam.
Clear the document jam.
00FF
All redialing attempts have failed.
Check if the recipient's number is
correct or the telephone cable is
properly connected, and try again.
If a Power Failure Occurs
If a power failure occurs, machine functions will be limited as follows:
– Depending on your telephone, you may not be able to make telephone calls.
– You can receive telephone calls from the handset or telephone connected to the
machine.
– You cannot send, receive, or copy documents.
If power is suddenly lost due to a power failure or accidental unplugging, the machine
may lose received documents stored in memory. If this happens, the LCD displays
<DRAM LOST> when power is restored and automatically prints a Lost Report (unless
the cartridge is empty or there is no paper in the machine) that lists the documents
(received in the last 60 transactions) that were lost from memory as a result of the
power cut.
Troubleshooting
9-12
If You Cannot Solve a Problem
If you cannot solve the problem after having referred to the information in this
chapter, contact Canon Customer Care Center at 1-800-828-4040 between the
hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to
8:00 P.M. on Saturday.
Please have the following information ready when you contact Canon:
– Product name (FAXPHONE L120)
– Serial number (On the label located at the back of the machine)
– Place of purchase
– Nature of problem
– Steps you have taken to solve the problem and the results
CAUTION
If the machine makes strange noises, emits smoke or odd odor, unplug it immediately and contact Canon
Customer Care Center. Do not attempt to disassemble or repair the machine yourself.
NOTE
Troubleshooting
Attempting to repair the machine yourself may void the limited warranty.
9-13
Troubleshooting
9-14
Machine Settings
Machine Settings
You can adjust the machine settings from the Setting Menu to customize the way
the machine works. To see the list of current settings, print out the Machine
Status List.
Printing the Machine Status List
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
Machine Settings
Hook
0
#
Tone
1
2
10-1
Press [Status].
Use [Up/Down] to select <PRINT REPORT?>, then press [Set].
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
3
Use [Up/Down] to select <MACHINE STATUS?>, then press [Set].
Machine Settings
10-2
Accessing the Setting Menu
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
1
2
Press [Menu].
Use [Up/Down] to select the required menu, then press [Set].
Machine Settings
<MACHINE SETTING?>
<PAPER SOURCE SETUP?>
<TEL REGISTRATION?>
<TX SETTING?>
<RX SETTING?>
<COMM.SETTING?>
<REPORTING SETTING?>
<USER SETTING?>
10-3
FAXPHONE L120
Add.Mode
Menu
Status
Copy
[Set]
Image Quality Directory Coded Dial
Redial
Pause
ABC
1
GHI
DEF
2
JKL
4
PQRS
Hook
3
MNO
5
TUV
7
6
Set
Clear
Stop/Reset
WXYZ
8
9
Start
SYMBOLS
OPER
0
#
Tone
3
4
5
Use [Up/Down] to select the required setting item, then press [Set].
To register the settings or go to subsetting items, press [Set].
When finished, press [Stop/Reset] to return to standby mode.
Machine Settings
10-4
Setting Menu
MACHINE SETTING
Setting Item
Description
1 TONER SAVING
Sets whether to save toner consumption.
2 TONER EMPTY STOP
Sets whether to stop printing when toner has run out.
3 LANGUAGE
Sets the language for LCD.
4 BUZZER VOLUME
Sets volumes for machine beeps in four levels.
CALLING
Sets the calling volume.
KEY
Sets the keypad volume.
ALARM
Sets the alarm volume.
LINE VOL
Sets the line monitor volume.
5 DAYLIGHT SAVING
Sets whether to follow the daylight saving time.
PAPER SOURCE SETUP
Setting Item
Machine Settings
1 CASSETTE PAPER
Description
Sets the paper type and size. (See “Setting Paper Type and
Size,” on p. 3-7.)
TEL REGISTRATION
Setting Item
Description
1 1-TOUCH SPD DIAL
Registers recipient’s name, number, subaddress, and
password for one-touch speed dialing. (See “Registering
One-Touch Speed Dialing,” on p. 4-7.)
2 CODED DIAL
Registers recipient’s name, number, subaddress, and
password for coded speed dialing. (See “Registering Coded
Speed Dialing,” on p. 4-15.)
3 GROUP DIAL
Registers multiple recipients for group dialing. (See
“Registering Group Dialing,” on p. 4-22.)
10-5
TX SETTING
Setting Item
Description
1 SCAN CONTRAST
Sets scan contrast. (See “Contrast,” on p. 4-3.)
2 IMAGE QUALITY
Sets default image quality. (See “Image Quality,” on p. 4-4.)
3 HEADER
Sets whether to show header on each page sent.
4 AUTO REDIAL
Sets the number of times and the interval between
automatic redialing. (See Chapter 1, “Advanced Fax
Features,” in the Advanced Guide.)
RX SETTING
Setting Item
Description
1 MEMORY RX MODE
Sets whether to store received faxes in memory at what
time, with password protection if required. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
2 INCOMING RINGS
Sets whether the machine is to ring for how many times
before it answers a call.
3 REDUCTION RX
Sets whether to reduce or truncate the image when a faxed
page is larger than the size of paper loaded.
ON
Reduces the image to fit on the size of paper loaded.
OFF
Retains the original size of the image.
CUT
Truncates the image.
Sets whether to store all received pages in memory before
printing them out or print each page as it is received.
MEMORY RX
Print after all the pages of the document are received.
PRINT RX
Print each page as it is received.
10-6
Machine Settings
4 RX PRINT
RX SETTING
5 RX MODE
Sets the fax receive mode. (See Chapter 1, “Advanced Fax
Features,” in the Advanced Guide.)
6 FOOTER
Sets whether to insert footer on received faxes to show the
machine’s fax number and the sender information.
7 RX RESTRICTION
Sets whether to reject calls from numbers not registered for
speed dialing. (See Chapter 1, “Advanced Fax Features,” in
the Advanced Guide.)
8 REMOTE RX
Sets whether to enable fax reception remotely using a
telephone. (See Chapter 1, “Advanced Fax Features,” in the
Advanced Guide.)
COMM.SETTING
Setting Item
1 TEL LINE TYPE
Description
Sets the telephone line type. (See “Set the Telephone Line
Type,” in the Starter Guide.)
REPORTING SETTING
Machine Settings
Setting Item
Description
1 ACTIVITY REPORT
Sets whether to print an activity report automatically. (See
Chapter 3, “Reports and Lists,” in the Advanced Guide.)
2 TX RESULT REPORT
Sets whether to print a TX (transmission) result report
automatically. (See Chapter 3, “Reports and Lists,” in the
Advanced Guide.)
3 RX RESULT REPORT
Sets whether to print a RX (reception) result report
automatically. (See Chapter 3, “Reports and Lists,” in the
Advanced Guide.)
10-7
USER SETTING
Setting Item
Description
1 DATE&TIME
Sets the machine time and date. (See “Register Sender
Information,” in the Starter Guide.)
2 USER FAX NO.
Sets the machine’s fax number. (See “Register Sender
Information,” in the Starter Guide.)
3 USER NAME
Sets the user name. (See “Register Sender Information,” in
the Starter Guide.)
NOTE
Depending on the country of purchase, some settings may not be available.
Machine Settings
10-8
Appendix
Specifications
Appendix
General
● Type
Personal Desktop
● Power Source
– 120–127 V
– 60 Hz
● Power Consumption
Max. 700 W (when copying)
● Warm-up Time
Approx. 12 seconds
● Weight
Approx. 20.5 lb./9.2 kg (with components attached)
● Dimensions
Trays open: 19.1 in. (W) x 22.8 in. (D) x 12.8 in. (H)
(484 mm (W) x 580 mm (D) x 326 mm (H))
Trays folded: 19.1 in. (W) x 15.2 in. (D) x 8.7 in. (H)
(484 mm (W) x 386 mm (D) x 221 mm (H))
● Installation Space
19.1 in. (W) x 22.8 in. (D) x 12.8 in. (H) (484 mm (W) x
580 mm (D) x 326 mm (H))
● Environmental
Conditions
– Temperature: 59°F–86°F (15°C–30°C)
– Humidity: 10%–80% RH
● Display Languages
English/French/Spanish/Portuguese
● ADF Capacity
» p. 2-1.
● Printable Area
» p. 3-2.
● Scanned Area
» p. 2-2.
11-1
Facsimile
Public Switched Telephone Network (PSTN)*1
● Compatibility
G3
● Data Compression
Schemes
MH, MR, MMR
● Modem Speed
33600/31200/28800/26400/24000/21600/19200/
16800/14400/12000/9600/7200/4800/2400 bps
Automatic fallback
● Transmission Speed
Approx. 3 seconds/page*2 at 33.6 Kbps, ECM-MMR,
transmitting from memory
● Transmission/
Reception Memory
Approx. 340/346 pages*2
● Fax Resolution
– STD: 203 pels/in. x 98 lines/in.
(8 pels/mm x 3.85 lines/mm)
– FINE: 203 pels/in. x 196 lines/in.
(8 pels/mm x 7.7 lines/mm)
– S-FINE: 203 pels/in. x 392 lines/in.
(8 pels/mm x 15.4 lines/mm)
● Dialing
– Speed dialing
One-touch speed dialing (15 destinations)
Coded speed dialing (100 destinations)
Group dialing (max. 50 destinations)
– Regular dialing (with numeric buttons)
– Sequential broadcasting (max. 131 destinations)
– Automatic redialing
– Manual redialing
– Pause button
– Redial button
Appendix
● Applicable Line
11-2
Copier
● Scanning Resolution
300 x 300 dpi
● Printing Resolution
600 x 600 dpi
● Enlargement/
Reduction
0.50 (50%) to 2.00 (200%) in 0.01 (1%) increments
● First Copy Time
Approx. 23 seconds
● Copy Speed
Approx. 12.5 pages/minute (Letter-size)
● No. of Copies
Max. 99 copies
Telephone
Appendix
● Connection
11-3
– Handset
– External telephone/answering machine (CNG
detecting signal)/data modem
Printer
● Printing Method
Electrophoto Method (on-demand fixing)
● Paper Handling
Automatic feed
● Paper Size and Weight
» p. 3-1.
● Print Speed
See “Copy Speed,” on p. 11-3.
● Print Width
8.3 in. (212 mm)
● Resolution
600 x 600 dpi
● Number of Tones
256
● Printing Cartridge
» p. 1-7.
● Toner Saver
Approx. 50% reduction in toner consumption
*1 The Public Switched Telephone Network (PSTN) currently supports 28.8 Kbps
modem speed or lower, depending on telephone line conditions.
*2 Based on ITU-T Standard Chart No. 1, standard mode.
NOTE
Specifications are subject to change without notice.
Appendix
11-4
Index
A
D
A4 3-1
Density 6-4
[Add. Mode] button 1-3
[Directory] button 1-3
ADF 1-1, 2-3
Document
Automatic document feeder 1-1
Guides 2-3
Jams 9-1
Loading 2-3
Requirements 2-1
Scanned area 2-2
C
Cartridge 1-7
Recycling 8-9
Replacing 8-7
Cartridge cover 1-1
CHANGE TONER message 8-5
Cleaning the machine
Exterior 8-1
Interior 8-2
Scanning area 8-4
Document delivery tray 1-1
Document delivery tray extension 1-1
Document feeder tray 1-1
Document feeder tray extension 1-1
Document guides 1-1
Document release lever 1-1
[Clear] button 1-4
E
[Coded Dial] button 1-3, 4-28
Envelope
Loading 3-4
Coded speed dialing 4-6
Deleting 4-21
Editing 4-18
Registering 4-15
Using 4-28
COMM.SETTING 10-7
Appendix
Components 1-1
Contrast 4-3
[Copy] button 1-3
Copying 6-1
Customer Support
Canada xiv
U.S.A. xiii
11-5
Error Codes 9-11
External device jack 1-2
G
Group dialing 4-6
Deleting 4-26
Editing 4-24
Registering 4-22
Using 4-27
H
M
Handset 1-2, 1-6, 4-29
MACHINE SETTING 10-5
Handset cradle 1-2
Machine settings 10-1
Handset jack 1-2
Machine Status List 10-1
[Hook] button 1-3, 4-29
Maintenance 8-1
Manual Sending 4-29
I
Menu
If a power failure occurs 9-12
Accessing 10-3
Button 10-3
If you cannot solve a problem 9-13
Image quality
Copy 6-3
Fax 4-4
[Image Quality] button 1-3
[Menu] button 1-3
N
Notch 1-1
Numeric buttons 1-3
J
Jack
External device 1-2
Handset 1-2
Line 1-2
Jams
Document 9-1
Inside the machine 9-3
Paper 9-3
Paper feeder 9-5
O
One-touch speed dialing 4-6
Deleting 4-14
Editing 4-11
Registering 4-7
Using 4-27
One-Touch Speed Dialing buttons 1-3
OPEN CARTRIDGE COVER message 9-3
Operation panel 1-1, 1-3
ORIGINAL DOC. JAM message 9-1
L
LCD 1-3, 1-5
Messages 9-6
[Left/Right] button 1-4
Appendix
Legal 3-1
Letter 3-1
Line jack 1-2
Loading
Document 2-3
Envelope 3-4
Paper 3-4
11-6
P
S
Paper
Guidelines 3-3
Jams 9-3
Loading 3-4
Printable area 3-2
Requirements 3-1
Paper delivery tray 1-1
Paper delivery tray extension 1-1
PAPER JAM message 9-3
PAPER SOURCE SETUP 3-7, 10-5
Paper stack cover 1-1
Safety Instructions xi
Scan settings
Copy 6-3
Fax 4-3
Scanned area 2-2
Sending faxes 4-1
[Set] button 1-4
Setting menu 10-5
Setting paper type and size 3-7
Specifications 11-1
Copier 11-3
Facsimile 11-2
General 11-1
Printer 11-4
Telephone 11-3
Password 4-6
[Pause] button 1-3
Power socket 1-2
Printable area 3-2
Printing 7-1
Speed dialing 4-6
Standby mode 1-5
R
Copy 1-5
Fax 1-5
Receiving Faxes 5-1
Recycling the cartridge 8-9
[Redial] button 1-3
Redistributing toner 8-5
Registering speed dialing 4-6
REMOVE ORIG. IN ADF message 9-1
Replacing the cartridge 8-7
REPORTING SETTING 10-7
RX SETTING 10-6
[Start] button 1-4
[Status] button 1-3, 10-1
[Stop/Reset] button 1-4
Subaddress 4-6
T
TEL REGISTRATION 10-5
[Tone] button 1-3
Toner cartridge 1-7
Appendix
Transporting the machine 8-15
Troubleshooting 9-1
TX SETTING 10-6
11-7
U
[Up/Down] button 1-4
USB port 1-2
USER SETTING 10-8
Using Speed Dialing 4-27
Z
Zoom ratio 6-5
Appendix
11-8
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano, 8 20097 San Donato Milanese (MI) Italy
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400, Miami, Florida 33126, U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO.,LTD
15F, North Tower, Beijing Kerry Centre, 1 Guang Hua Road, Chao Yang District, 100020, Beijing, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FA7-7805 (010)
062005NF
© CANON INC. 2005
PRINTED IN KOREA